On-surface synthesis of heptacene and its interaction with a metal surface

Comparing Adsorption of an Electron-Rich Triphenylene Derivative: Metallic vs Graphitic Surfaces

Crucial to the performance of devices based on organic molecules is an understanding of how the substrate-molecule interface influences both structural and electronic properties of the molecular layers. Within this context we studied the self-assembly of an alkoxy-triphenylene derived electron donor (HAT) in the monolayer regime on graphene/Ni(111). The molecules assembled into a close-packed hexagonal network commensurate with the graphene layer. Despite the commensurate structure, the HAT molecules only had a weak, physisorptive interaction with the substrate as pointed out by the photoelectron spectroscopy data. We discuss these findings in view of our recent reports for HAT adsorbed on Ag(111) and graphene/Ir(111). For all three substrates HAT adopts a similar close-packed hexagonal structure commensurate with the substrate while being physisorbed. The ionization potential is equal for all three substrates, supporting weak molecule-substrate interactions. These findings are remarkable, as commensurate overlayers usually only form at strongly interacting interfaces. We discuss potential reasons for this particular behavior of HAT which clearly sets itself apart from most studied molecule-substrate systems. In particular, these are the relatively weak but flexible intermolecular interactions, the molecular symmetry matching that of the substrate, and the comparatively weak but directional molecule-substrate interactions.

Two-Dimensional Nonbenzenoid Heteroacene Crystals Synthesized via In-Situ Embedding of Ladder Bipyrazinylenes on Au(111)

Precisely introducing topological defects is an important strategy in nanographene crystal engineering because defects can tune π-electronic structures and control molecular assemblies. The synergistic control of the synthesis and assembly of nanographenes by embedding the topological defects to afford two-dimensional (2D) crystals on surfaces is still a great challenge. By in-situ embedding ladder bipyrazinylene (LBPy) into acene, the narrowest nanographene with zigzag edges, we have achieved the precise preparation of 2D nonbenzenoid heteroacene crystals on Au(111). Through intramolecular electrocyclization of o-diisocyanides and Au adatom-directed [2+2] cycloaddition, the nonbenzenoid heteroacene products are produced with high chemoselectivity, and lead to the molecular 2D assembly via LBPy-derived interlocking hydrogen bonds. Using bond-resolved scanning tunneling microscopy, we determined the atomic structures of the nonbenzenoid heteroacene product and diverse organometallic intermediates. The tunneling spectroscopy measurements revealed the electronic structure of the nonbenzenoid heteroacene, which is supported by density functional theory (DFT) calculations. The observed distinct organometallic intermediates during progression annealing combined with DFT calculations demonstrated that LBPy formation proceeds via electrocyclization of o-diisocyanides, trapping of heteroarynes by Au adatoms, and stepwise elimination of Au adatoms.

On-Surface Synthesis and Determination of the Open-Shell Singlet Ground State of Tridecacene

The character of the electronic structure of acenes has been the subject of longstanding discussion. However, convincing experimental evidence of their open-shell character has so far been missing. Here, we present the on-surface synthesis of tridecacene molecules by thermal annealing of octahydrotridecacene on a Au(111) surface. We characterized the electronic structure of the tridecacene by scanning probe microscopy, which reveals the presence of an inelastic signal at 126 meV. We attribute the inelastic signal to spin excitation from the singlet diradical ground state to the triplet excited state. To rationalize the experimental findings, we carried out many-body ab initio calculations as well as model Hamiltonians to take into account the effect of the metallic substrate. Moreover, we provide a detailed analysis of how the dynamic electron correlation and virtual charge fluctuation between the molecule and metallic surface reduces the singlet-triplet band gap. Thus, this work provides the first experimental confirmation of the magnetic character of tridecacene.

Synthesis of π-conjugated polycyclic compounds by late-stage extrusion of chalcogen fragments

The "precursor approach" has proved particularly valuable for the preparation of insoluble and unstable π-conjugated polycyclic compounds (π-CPCs), which cannot be synthesized via in-solution organic chemistry, for their improved processing, as well as for their electronic investigation both at the material and single-molecule scales. This method relies on the synthesis and processing of soluble and stable direct precursors of the target π-CPCs, followed by their final conversion in situ, triggered by thermal activation, photoirradiation or redox control. Beside well-established reactions involving the elimination of carbon-based small molecules, i.e., retro-Diels-Alder and decarbonylation processes, the late-stage extrusion of chalcogen fragments has emerged as a highly promising synthetic tool to access a wider variety of π-conjugated polycyclic structures and thus to expand the potentialities of the "precursor approach" for further improvements of molecular materials' performances. This review gives an overview of synthetic strategies towards π-CPCs involving the ultimate elimination of chalcogen fragments upon thermal activation, photoirradiation and electron exchange.

On surface synthesis of an eleven-ring sulfur-doped nonacene

Dithienoacenes with a heptacene core, heptaceno[2,3-b:11,12-b']bis[1]benzothiophene, have been synthesized through the combination of solution and surface assisted chemistry. The atomic composition, structural arrangement and electronic properties of the molecules on the Au(111) surface have been deeply explored by non-contact atomic force microscopy (nc-AFM), bond-resolved scanning tunnelling microscopy (BR-STM) and scanning tunneling spectroscopy (STS) corroborated by density functional theory (DFT) calculations. Our combined experiments reveal modifications induced by sulfur substitution.

Orientation, electronic decoupling and band dispersion of heptacene on modified and nanopatterned copper surfaces

The adsorption of heptacene (7 A) on Cu(110) and Cu(110)-(2 × 1)-O was studied with scanning tunneling microscopy, photoemission orbital tomography and density functional calculations to reveal the influence of surface passivation on the molecular geometry and electronic states. We found that the charge transfer into the 7 A molecules on Cu(110) is completely suppressed for the oxygen-modified Cu surface. The molecules are aligned along the Cu-O rows and uncharged. They are tilted due to the geometry enforced by the substrate and the ability to maximize intermolecular π-π overlap, which leads to strong π-band dispersion. The HOMO-LUMO gap of these decoupled molecules is significantly larger than that reported on weakly interacting metal surfaces. Finally, the Cu-O stripe phase was used as a template for nanostructured molecular growth and to assess possible confinement effects.

A comprehensive investigation of the plasmonic-photocatalytic properties of gold nanoparticles for CO2 conversion to chemicals

Understanding the interactions between plasmonic gold (Au) nanoparticles and the adsorbate is essential for photocatalytic and plasmonic applications. However, it is often challenging to identify a specific reaction mechanism in the ground state and to explore the optical properties in the excited states because of the complicated pathways of carriers. In this study, photocatalytic reduction of carbon dioxide (CO₂) to C1 products (for example, CO and CH₄) on the Au(111) nanoparticle (NP) surface was studied based on reaction pathway analysis, adsorbate reactivity, and its ability to stabilize or deactivate the surface. The calculated reaction Gibbs free energies and activation barriers revealed that the first step in CO reduction via a direct hydrogen transfer mechanism on Au(111) is the formation of formyl (*CHO) instead of hydroxymethylidyne (*COH). Furthermore, the size enhanced and symmetry sensitive optical responses of cuboctahedral Au(111) NPs on localized surface plasmon resonance (LSPR) were investigated by using time-dependent DFT (TDDFT) calculations. Although near field enhancement around cuboctahedral Au(111) NPs is only weakly dependent on the morphology of NPs, it was observed that corner sites stabilize *C-species to drive the CO₂ reduction to CO. The density of active surface states interacting with the adsorbate states near the Fermi level gradually decreases from the (111) on-top site toward the corner site of the Au(111) NP-CO system, which strongly affects the molecule's binding on catalytic sites and, in particular, electronic excitation. Finally, the spatial distribution of the charge oscillations was determined as a guide for the fabrication of Au NPs with an optimal LSPR response.

Synthesis and Characterization of peri-Heptacene on a Metallic Surface

The synthesis of long n-peri-acenes (n-PAs) is challenging as a result of their inherent open-shell radical character, which arises from the presence of parallel zigzag edges beyond a certain n value. They are considered as π-electron model systems to study magnetism in graphene nanostructures; being potential candidates in the fabrication of optoelectronic and spintronic devices. Here, we report the on-surface formation of the largest pristine member of the n-PA family, i.e. peri-heptacene (n=7, 7-PA), obtained on an Au(111) substrate under ultra-high vacuum conditions. Our high-resolution scanning tunneling microscopy investigations, complemented by theoretical simulations, provide insight into the chemical structure of this previously elusive compound. In addition, scanning tunneling spectroscopy reveals the antiferromagnetic open-shell singlet ground state of 7-PA, exhibiting singlet-triplet spin-flip inelastic excitations with an effective exchange coupling (J_eff ) of 49 meV.

Synthesis of oligoacenes using precursors for evaluation of their electronic structures

Acenes, which are hydrocarbons comprising linearly fused benzene rings, have attracted considerable attention owing to their electronic structures and utility as organic electronic materials. However, the ease with which oligoacenes undergo oxidation increases with the number of linearly fused benzene rings owing to the increased energy of the highest occupied molecular orbital. The synthesis of naked oligoacenes with seven or more benzene rings is difficult because their open-shell structure renders them unstable. The recent development of a precursor method has enabled the in situ synthesis of oligoacenes under specific conditions and the spectroscopic observation of oligoacene in single crystals, in film matrices and under cryogenic conditions. Scanning tunneling microscopy and non-contact atomic force microscopy under ultra-high vacuum conditions have also made significant advances in the study of oligoacenes and oligoazaacenes. This paper reviews the recent progress in the synthesis of oligoacenes using precursors, with a particular focus on the chemical structures, synthesis, and reactivity of the precursors. The electronic properties of oligoacenes are also discussed in relation to the number of fused benzene rings, including their energy levels and spin states. These results will contribute to the synthesis and development of carbon nanomaterials with applications in the field of organic electronics.

Hexacene on Cu(110) and Ag(110): Influence of the Substrate on Molecular Orientation and Interfacial Charge Transfer

Hexacene, composed of six linearly fused benzene rings, is an organic semiconductor material with superior electronic properties. The fundamental understanding of the electronic and chemical properties is prerequisite to any possible application in devices. We investigate the orientation and interface properties of highly ordered hexacene monolayers on Ag(110) and Cu(110) with X-ray photoemission spectroscopy (XPS), photoemission orbital tomography (POT), X-ray absorption spectroscopy (XAS), low-energy electron diffraction (LEED), scanning tunneling microscopy (STM), and density functional theory (DFT). We find pronounced differences in the structural arrangement of the molecules and the electronic properties at the metal/organic interfaces for the two substrates. While on Cu(110) the molecules adsorb with their long molecular axis parallel to the high symmetry substrate direction, on Ag(110), hexacene adsorbs in an azimuthally slightly rotated geometry with respect to the metal rows of the substrate. In both cases, molecular planes are oriented parallel to the substrate. A pronounced charge transfer from both substrates to different molecular states affects the effective charge of different C atoms of the molecule. Through analysis of experimental and theoretical data, we found out that on Ag(110) the LUMO of the molecule is occupied through charge transfer from the metal, whereas on Cu(110) even the LUMO+1 receives a charge. Interface dipoles are determined to a large extent by the push-back effect, which are also found to differ significantly between 6A/Ag(110) and 6A/Cu(110).

On-surface synthesis and characterization of nitrogen-substituted undecacenes

Heteroatom substitution in acenes allows tailoring of their remarkable electronic properties, expected to include spin-polarization and magnetism for larger members of the acene family. Here, we present a strategy for the on-surface synthesis of three undecacene analogs substituted with four nitrogen atoms on an Au(111) substrate, by employing specifically designed diethano-bridged precursors. A similarly designed precursor is used to synthesize the pristine undecacene molecule. By comparing experimental features of scanning probe microscopy with ab initio simulations, we demonstrate that the ground state of the synthesized tetraazaundecacene has considerable open-shell character on Au(111). Additionally, we demonstrate that the electronegative nitrogen atoms induce a considerable shift in energy level alignment compared to the pristine undecacene, and that the introduction of hydro-aza groups causes local anti-aromaticity in the synthesized compounds. Our work provides access to the precise fabrication of nitrogen-substituted acenes and their analogs, potential building-blocks of organic electronics and spintronics, and a rich playground to explore π-electron correlation.

Preparative-scale synthesis of nonacene

During the last years we have witnessed progressive evolution of preparation of acenes with length up to dodecacene by on-surface synthesis in ultra-high vacuum or generation of acenes up to decacene in solid matrices at low temperatures. While these protocols with very specific conditions produce the acenes in amount of few molecules, the strategies leading to the acenes in large quantities dawdle behind. Only recently and after 70 years of synthetic attempts, heptacene has been prepared in bulk phase. However, the preparative scale synthesis of higher homologues still remains a formidable challenge. Here we report the preparation and characterisation of nonacene and show its excellent thermal and in-time stability.

Acenes, or linearly fused benzene rings, have both fundamental scientific interest and potential for electronic and material utility, but synthesis of acenes with more than six rings are difficult due to dimerization and degradation. Here the authors prepare nonacene and demonstrate that it is stable in inert conditions.

Evolution of adsorption heights in the on-surface synthesis and decoupling of covalent organic networks on Ag(111) by normal-incidence X-ray standing wave

Structural characterization in on-surface synthesis is primarily carried out by Scanning Probe Microscopy (SPM) which provides high lateral resolution. Yet, important fresh perspectives on surface interactions and molecular conformations are gained from adsorption heights that remain largely inaccessible to SPM, but can be precisely measured with both elemental and chemical sensitivity by Normal-Incidence X-ray Standing Wave (NIXSW) analysis. Here, we study the evolution of adsorption heights in the on-surface synthesis and post-synthetic decoupling of porous covalent triazine-phenylene networks obtained from 2,4,6-tris(4-bromophenyl)-1,3,5-triazine (TBPT) precursors on Ag(111). Room temperature deposition of TBPT and mild annealing to ∼150 °C result in full debromination and formation of organometallic intermediates, where the monomers are linked into reticulated networks by C-Ag-C bonds. Topologically identical covalent networks comprised of triazine vertices that are interconnected by biphenyl units are obtained by a thermally activated chemical transformation of the organometallic intermediates. Exposure to iodine vapor facilitates decoupling by intercalation of an iodine monolayer between the covalent networks and the Ag(111) surface. Accordingly, Scanning Tunneling Microscopy (STM), X-ray Photoelectron Spectroscopy (XPS) and NIXSW experiments are carried out for three successive sample stages: organometallic intermediates, covalent networks directly on Ag(111) and after decoupling. NIXSW analysis facilitates the determination of adsorption heights of chemically distinct carbon species, i.e. in the phenyl and triazine rings, and also for the organometallic carbon atoms. Thereby, molecular conformations are assessed for each sample stage. The interpretation of experimental results is informed by Density Functional Theory (DFT) calculations, providing a consistent picture of adsorption heights and molecular deformations in the networks that result from the interplay between steric hindrance and surface interactions. Quantitative adsorption heights, i.e. vertical distances between adsorbates and surface, provide detailed insight into surface interactions, but are underexplored in on-surface synthesis. In particular, the direct comparison with an in situ prepared decoupled state unveils the surface influence on the network structure, and shows that iodine intercalation is a powerful decoupling strategy.

Efficient photogeneration of nonacene on nanostructured graphene

The on-surface photogeneration of nonacene from α-bisdiketone precursors deposited on nanostructured epitaxial graphene grown on Ru(0001) has been studied by means of low temperature scanning tunneling microscopy and spectroscopy. The presence of an unoccupied surface state, spatially localized in the regions where the precursors are adsorbed, and energetically accessible in the region of the electromagnetic spectrum where n-π* transitions take place, allows for a 100% conversion of the precursors into nonacenes. With the help of state-of-the-art theoretical calculations, we show that such a high yield is due to the effective population of the surface state by the incoming light and the ensuing electron transfer to the unoccupied states of the precursors through an inelastic scattering mechanism. Our findings are the experimental confirmation that surface states can play a prominent role in the surface photochemistry of complex molecular systems, in accordance with early theoretical predictions made on small molecules.

Surface-assisted fabrication of low-dimensional carbon-based nanoarchitectures

On-surface synthesis, as an alternative to traditional in-solution synthesis, has become an emerging research field and attracted extensive attention over the past decade due to its ability to fabricate nanoarchitectures with exotic properties. Compared to wet chemistry, the on-surface synthesis conducted on atomically flat solid surfaces under ultrahigh vacuum exhibits unprecedented characteristics and advantages, opening novel reaction pathways for chemical synthesis. Various low-dimensional nanostructures have been fabricated on solid surfaces (mostly metal surfaces) based on this newly developed approach. This paper reviews the classic and latest works regarding carbon-based low-dimensional nanostructures since the arrival of on-surface synthesis era. These nanostructures are categorized into zero-, one- and two-dimensional classes and each class is composed of numerous sub-nanostructures. For certain specific nanostructures, comprehensive reports are given, including precursor design, substrate choice, synthetic strategies and so forth. We hope that our review will shed light on the fabrication of some significant nanostructures in this young and promising scientific area.

Demonstrating the Impact of the Adsorbate Orientation on the Charge Transfer at Organic-Metal Interfaces

Charge-transfer processes at molecule-metal interfaces play a key role in tuning the charge injection properties in organic-based devices and thus, ultimately, the device performance. Here, the metal's work function and the adsorbate's electron affinity are the key factors that govern the electron transfer at the organic/metal interface. In our combined experimental and theoretical work, we demonstrate that the adsorbate's orientation may also be decisive for the charge transfer. By thermal cycloreversion of diheptacene isomers, we manage to produce highly oriented monolayers of the rodlike, electron-acceptor molecule heptacene on a Cu(110) surface with molecules oriented either along or perpendicular to the close-packed metal rows. This is confirmed by scanning tunneling microscopy (STM) images as well as by angle-resolved ultraviolet photoemission spectroscopy (ARUPS). By utilizing photoemission tomography momentum maps, we show that the lowest unoccupied molecular orbital (LUMO) is fully occupied and also, the LUMO + 1 gets significantly filled when heptacene is oriented along the Cu rows. Conversely, for perpendicularly aligned heptacene, the molecular energy levels are shifted significantly toward the Fermi energy, preventing charge transfer to the LUMO + 1. These findings are fully confirmed by our density functional calculations and demonstrate the possibility to tune the charge transfer and level alignment at organic-metal interfaces through the adjustable molecular alignment.

Pushing the Limits of Acene Chemistry: The Recent Surge of Large Acenes

Acenes, consisting of linearly fused benzene rings, are an important fundamental class of organic compounds with various applications. Hexacene is the largest acene that was synthesized and isolated in the 20th century. The next largest member of the acene family, heptacene, was observed in 2007 and since then significant progress in preparing acenes has been reported. Significantly larger acenes, up to undecacene, could be studied by means of low-temperature matrix isolation spectroscopy with in situ photolytic generation, and up to dodecacene by means of on-surface synthesis employing innovative precursors and highly defined crystalline metal surfaces under ultrahigh vacuum conditions. The review summarizes recent experimental and theoretical advances in the area of acenes that give a significantly deeper insight into the fundamental properties and nature of the electronic structure of this fascinating class of organic compounds.

Going beyond Pentacene: Photoemission Tomography of a Heptacene Monolayer on Ag(110)

Longer acenes such as heptacene are promising candidates for optoelectronic applications but are unstable in their bulk structure as they tend to dimerize. This makes the growth of well-defined monolayers and films problematic. In this article, we report the successful preparation of a highly oriented monolayer of heptacene on Ag(110) by thermal cycloreversion of diheptacenes. In a combined effort of angle-resolved photoemission spectroscopy and density functional theory (DFT) calculations, we characterize the electronic and structural properties of the molecule on the surface in detail. Our investigations allow us to unambiguously confirm the successful fabrication of a highly oriented complete monolayer of heptacene and to describe its electronic structure. By comparing experimental momentum maps of photoemission from frontier orbitals of heptacene and pentacene, we shed light on differences between these two acenes regarding their molecular orientation and energy-level alignment on the metal surfaces.

Unusual reversibility in molecular break-up of PAHs: the case of pentacene dehydrogenation on Ir(111)

In this work, we characterise the adsorption of pentacene molecules on Ir(111) and their dissociation behaviour as a function of temperature.

On-Surface Intramolecular Reactions

In the past decade, on-surface chemistry has provided fascinating concepts for the construction of covalently bonded molecular nanostructures and the exploration of new synthetic pathways that may be different from chemical synthesis in solution. Although the intermolecular reaction of precursor molecules may lead to the formation of the desired low-dimensional molecular architectures, it remains challenging to realize defect-free syntheses over large areas. Recently, intramolecular on-surface reactions have attracted increasing attention because they offer promising ways to synthesize functional organic molecules, especially those with extended conjugated π-systems. In this Perspective, we summarize the recent achievements in the field of on-surface intramolecular reactions and discuss future prospects.

Recent Progress in High Linearly Fused Polycyclic Conjugated Hydrocarbons (PCHs, n > 6) with Well-Defined Structures

Although polycyclic conjugated hydrocarbons (PCHs) and their analogues have gained great progress in the fields of organic photoelectronic materials, the in-depth study on present PCHs is still limited to hexacene or below because longer PCHs are insoluble, unstable, and tediously synthesized. Very recently, various strategies including on-surface synthesis are developed to address these issues and many higher novel PCHs are constructed. Therefore, it is necessary to review these advances. Here, the recent synthetic approach, basic physicochemical properties, single-crystal packing behaviors, and potential applications of the linearly fused PCHs (higher than hexacene), including acenes or π-extended acenes with fused six-membered benzenoid rings and other four-membered, five-membered or even seven-membered and eight-membered fused compounds, are summarized.

Dodecacene Generated on Surface: Reopening of the Energy Gap

The acene series represents a model system to investigate the intriguing electronic properties of extended π-electron structures in the one-dimensional limit, which are important for applications in electronics and spintronics and for the fundamental understanding of electronic transport. Here, we present the on-surface generation of the longest acene obtained so far: dodecacene. Scanning tunneling spectroscopy gives access to the energy position and spatial distribution of its electronic states on the Au(111) surface. We observe that, after a progressive closing of the gap and a stabilization to about 1 eV at the length of decacene and undecacene, the energy gap of dodecacene unexpectedly increases to 1.4 eV. Considering the acene series as an exemplary general case, we discuss the evolution with length of the single tunneling resonances in comparison with ionization energy, electronic affinity, and optical gap.

Tetrabenzononacene: "Butterfly Wings" Stabilize the Core

In combination with bulky substituents at the core, fourfold benzannulation at the cata‐positions stabilizes a nonacene sufficiently to allow its isolation and characterization by ¹H NMR and X‐ray analysis. The four benzo units blueshift the absorption spectrum in comparison to a solely linear nonacene, but significantly increase the stability in the solid state.

Two-Sidedness of Surface Reaction Mediation

A heterogeneous catalytic process involves many surface elementary steps that affect the overall catalytic performance in one way or another. In general, a high-performance heterogeneous catalyst should meet the main criteria: excellent catalytic activity and high selectivity toward target products. Using surface science techniques, the two-sidedness of the surface reaction mediations can be explored, from the perspectives of the surface and the molecule manipulations. The surface manipulation refers to a reaction that is mediated by composition and structure of the substrate as well as surface species, while the molecular manipulation relates to a reaction that is mediated by the reacting molecule via the precursor selection, environmental control, or external excitation. The best catalytic system should consist of the most efficient catalyst and the best suitable reacting molecule, in addition to its economic benefit and environmental amity. Recent research progress in surface reaction mediation is outlined, and its two-sidedness is governed by the Arrhenius equation. This should shed new light on the connection between basic theory and surface reaction mediation strategies. To conclude, challenges and possible opportunities are elaborated for efficient surface reaction mediations.

On-surface light-induced generation of higher acenes and elucidation of their open-shell character

Acenes are an important class of polycyclic aromatic hydrocarbons which have recently gained exceptional attention due to their potential as functional organic semiconductors. Fundamentally, they are important systems to study the convergence of physico-chemical properties of all-carbon sp2-frameworks in the one-dimensional limit; and by virtue of having a zigzag edge topology they also provide a fertile playground to explore magnetism in graphenic nanostructures. The study of larger acenes is thus imperative from both a fundamental and applied perspective, but their synthesis via traditional solution-chemistry route is hindered by their poor solubility and high reactivity. Here, we demonstrate the on-surface formation of heptacene and nonacene, via visible-light-induced photo-dissociation of α-bisdiketone precursors on an Au(111) substrate under ultra-high vacuum conditions. Through combined scanning tunneling microscopy/spectroscopy and non-contact atomic force microscopy investigations, together with state-of-the-art first principles calculations, we provide insight into the chemical and electronic structure of these elusive compounds.

A Practical General Method for the Preparation of Long Acenes

The field of long acenes, the narrowest of the zig-zag graphene nanoribbons, has been an area of significant interest in the past decade because of its potential applications in organic electronics, spintronics and plasmonics. However the low solubility and high reactivity of these compounds has so far hindered their preparation on large scales. We report here a concise strategy for the synthesis of higher acenes through Diels-Alder condensation of arynes with a protected tetraene ketone. After deprotection by cleavage of the ketal, the obtained monoketone precursors cleanly yield the corresponding acenes through quantitative cheletropic thermal decarbonylation in the solid state, at moderate temperatures of 155 to 205 °C. This approach allows the preparation of heptacene, benzo[a]hexacene, cis- and trans-dibenzopentacene and offers a valuable new method for the synthesis of even larger acenes.

peri-Acenoacenes

We report the challenging synthesis and electronic properties of a new class of rhombic peri-fused acene dimers, the so-called peri-acenoacenes. Compared to rectangular peri-fused peri-acenes, peri-acenoacenes show less diradical character and higher stability. Two soluble and stable aryl-substituted peri-acenoacenes, peri-tetracenotetracene (TT-Ar) and peri-pentacenopentacene (PP-Ar), are synthesized and their structures are confirmed by X-ray crystallographic analysis. Their optical properties and electronic properties are different from those of peri-acene derivatives. Unexpectedly, both the neutral compounds and dications are aromatic.

On-surface synthesis of heptacene on Ag(001) from brominated and non-brominated tetrahydroheptacene precursors

Achieving the Ag(001)-supported synthesis of heptacene from two related reactants reveals the effect of the presence of Br atoms on the reaction process.

Achieving the Ag(001)-supported synthesis of heptacene from two related reactants reveals the effect of the presence of Br atoms on the reaction process. The properties of reactants, intermediates and end-products are further characterized by scanning tunneling microscopy and spectroscopy.

Electronic Resonances and Gap Stabilization of Higher Acenes on a Gold Surface

On-surface synthesis provides a powerful method for the generation of long acene molecules, making possible the detailed investigation of the electronic properties of single higher acenes on a surface. By means of scanning tunneling microscopy and spectroscopy combined with theoretical considerations, we discuss the polyradical character of the ground state of higher acenes as a function of the number of linearly fused benzene rings. We present energy and spatial mapping of the tunneling resonances of hexacene, heptacene, and decacene, and discuss the role of molecular orbitals in the observed tunneling conductance maps. We show that the energy gap between the first electronic tunneling resonances below and above the Fermi energy stabilizes to a finite value, determined by a first diradical electronic perturbative contribution to the polyacene electronic ground state. Up to decacene, the main contributor to the ground state of acenes remains the lowest-energy closed-shell electronic configuration.

Supramolecular Assemblies on Surfaces: Nanopatterning, Functionality, and Reactivity

Understanding how molecules interact to form large-scale hierarchical structures on surfaces holds promise for building designer nanoscale constructs with defined chemical and physical properties. Here, we describe early advances in this field and highlight upcoming opportunities and challenges. Both direct intermolecular interactions and those that are mediated by coordinated metal centers or substrates are discussed. These interactions can be additive, but they can also interfere with each other, leading to new assemblies in which electrical potentials vary at distances much larger than those of typical chemical interactions. Earlier spectroscopic and surface measurements have provided partial information on such interfacial effects. In the interim, scanning probe microscopies have assumed defining roles in the field of molecular organization on surfaces, delivering deeper understanding of interactions, structures, and local potentials. Self-assembly is a key strategy to form extended structures on surfaces, advancing nanolithography into the chemical dimension and providing simultaneous control at multiple scales. In parallel, the emergence of graphene and the resulting impetus to explore 2D materials have broadened the field, as surface-confined reactions of molecular building blocks provide access to such materials as 2D polymers and graphene nanoribbons. In this Review, we describe recent advances and point out promising directions that will lead to even greater and more robust capabilities to exploit designer surfaces.

Higher Acenes by On-Surface Dehydrogenation: From Heptacene to Undecacene

A unified approach to the synthesis of the series of higher acenes up to previously unreported undecacene has been developed through the on-surface dehydrogenation of partially saturated precursors. These molecules could be converted into the parent acenes by both atomic manipulation with the tip of a scanning tunneling and atomic force microscope (STM/AFM) as well as by on-surface annealing. The structure of the generated acenes has been visualized by high-resolution non-contact AFM imaging and the evolution of the transport gap with the increase of the number of fused benzene rings has been determined on the basis of scanning tunneling spectroscopy (STS) measurements.

Hexacene generated on passivated silicon

On-surface synthesis represents a successful strategy to obtain designed molecular structures on an ultra-clean metal substrate. While metal surfaces are known to favor adsorption, diffusion, and chemical bonding between molecular groups, on-surface synthesis on non-metallic substrates would allow the electrical decoupling of the resulting molecule from the surface, favoring application to electronics and spintronics. Here, we demonstrate the on-surface generation of hexacene by surface-assisted reduction on a H-passivated Si(001) surface. The reaction, observed by scanning tunneling microscopy and spectroscopy, is probably driven by the formation of Si-O complexes at dangling bond defects. Supported by density functional theory calculations, we investigate the interaction of hexacene with the passivated silicon surface, and with single silicon dangling bonds.