From fundamentals to applications: a toolbox for robust and multifunctional MOF materials

Facile synthesis of a carbon supported lithium iron phosphate nanocomposite cathode material from metal-organic framework for lithium-ion batteries

Lithium iron phosphate (LiFePO4, LFP) has become one of the most widely used cathode materials for lithium-ion batteries. The inferior lithium-ion diffusion rate of LFP crystals always incurs poor rate capability and unsatisfactory low-temperature performances. To meet with the requirements from the ever-growing market, it is of great significance to synthesize carbon supported LFP nanocomposite (LFP/C) cathode materials using cost effective and environmentally friendly methods. In this work, an LFP/C cathode material is straightforwardly prepared from a metal-organic framework (MOF) precursor ferric gallate (Fe-GA) using its self-template effect. The Fe-GA precursor is firstly fabricated from the redox coprecipitation reaction between Fe foils and gallic acid (GA) molecules in mild aqueous phase. Then the Fe-GA is directly converted to the LFP/C sample after a following solid-state reaction. In half-cells, the LFP/C composite exhibits a reversible capacity of 109.7 mAh·g-1 after 500 cycles under the current rate of 100 mA·g-1 at 25 °C as well as good rate capabilities. In the LFP/C//graphite full-cells, the LFP/C composite can deliver a reversible capacity of 71.4 mAh·g-1 after 50 cycles in the same condition as the half-cells. The electrochemical performances of the LFP/C cathode in half-cells at lower temperature of -10 °C are also examined. Particularly, the evolution of samples has been explored and the lithium-ion storage mechanism of the LFP/C cathode has been unveiled. The sample synthesis protocol is straightforward, eco-friendly and atomic efficient, which can be considered to have good potential for scaling-up.

Spindle shaped Fe-Ni metal organic frameworks wrapped with f-MWCNTs for the efficacious sensing of tartrazine

A facile hydrothermal route was employed for the synthesis of iron-nickel bimetal organic frameworks (Fe-Ni bi-MOFs) and composite with an acid functionalized multi-walled carbon nanotubes (Fe-Ni MOF/f-MWCNTs) for electrochemical detection of tartrazine. The as-prepared Fe-Ni MOF/f-MWCNTs was confirmed by the several physicochemical studies. A micro spindle shaped, highly porous, and crystalline Fe-Ni MOF/f-MWCNTs was noticed. The high sensitivity and stability of Fe-Ni MOF/f-MWCNTs/GCE modified electrode was analyzed. Due to its high porosity nature, the analyte molecule effectively gets adsorbed on the modified electrode and undergo electrochemical oxidation effectively. The modified electrode exhibits low limit of detection (LOD) and limit of quantification (LOQ) as 0.04 × 10-6 mol/L and 0.13 × 10-6 mol/L towards tartrazine. These results reveal the potential applications of Fe-Ni MOF/f-MWCNTs/GCE as modified electrode material for sensitive detection of tartrazine along with its robust reproducibility, stability, and effective sensing properties.

Melamine-based metal-organic frameworks for high-performance supercapacitor applications

Melamine-based metal-organic frameworks (MOFs) for high-performance supercapacitor applications are described in this paper. Melamine (Me) is employed as an organic linker, and three metal ions cobalt, nickel, and iron (Co, Ni, Fe) are used ascentral metal ions to manufacture the desired MOF materials (Co-Me, Ni-Me, and Fe-Me). While melamine is an inexpensive organic linker for creating MOF materials, homogenous molecular structures can be difficult to produce. The most effective technique for expanding the molecular structures of MOFs through suitable experimental optimization is used in this work. The MOFs materials are characterized using standard techniques. The kinetics of the materials' reactions are investigated using attenuated total reflectance. X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (P-XRD), Fourier transform infrared (ATR-FT-IR) spectroscopy, and Brunauer-Emmett-Teller (BET) studies verified the development of the MOFs structure. The surface morphology of the produced materials is investigated using field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). The elements found in MOFs are studied via XPS analysis, energy dispersive X-ray diffraction (EDX), mapping, and mapping. The materials' absorption characteristics were examined by the use of UV-visible absorption spectroscopy. The thermal stability of the materials is examined by thermogravimetric analysis (TGA); these materials are more stable, according to the findings, even at high temperatures. The electrochemical investigation determines the specific capacitance of the materials. The specific capacitance of Co-Me, Ni-Me, and Fe-Me in 3 M KOH electrolyte is 1267.36, 803.22, and 507.59F/g @ 1 A-1, according to the three-electrode arrangement. The two-electrode device maximizes power and energy density by using an asymmetrical supercapacitor in a 3 M KOH electrolyte. The power and energy densities of Co-Me, Ni-Me, and Fe-Me are 3650.63, 2813.21, and 6210.45 W kg-1, and 68.43, 46.32, and 42.2 Wh kg-1, respectively. According to the materials stability test, the MOFs are highly stable after 10,000 cycles. Preliminary results suggest that the materials are suitable for usage in high-end supercapacitor uses.

Synergistic Linker and Linkage of Covalent Organic Frameworks for Enhancing Gold Capture

The tunable pore walls and skeletons render covalent organic frameworks (COFs) as promising absorbents for gold (Au) ion. However, most of these COFs suffered from low surface areas hindering binding sites exposed and weak binding interaction resulting in sluggish kinetic performance. In this study, COFs have been constructed with synergistic linker and linkage for high-efficiency Au capture. The designed COFs (PYTA-PZDH-COF and PYTA-BPDH-COF) with pyrazine or bipyridine as linkers showed high surface areas of 1692 and 2076 m2 g‒1, providing high exposed surface areas for Au capture. In addition, the Lewis basic nitrogen atoms from the linkers and linkages are easily hydronium, which enabled to fast trap Au via coulomb force. The PYTA-PZDH-COF and PYTA-BPDH-COF showed maximum Au capture capacities of 2314 and 1810 mg g-1, higher than other reported COFs. More importantly, PYTA-PZDH-COF are capable of rapid adsorption kinetics with achieving 95% of maximum binding capacity in 10 min. The theoretical calculation revealed that the nitrogen atoms in linkers and linkages from both COFs are simultaneously hydronium, and then the protonated PYTA-PZDH-COF are more easily binding the AuCl4 ‒, further accelerating the binding process. This study gives the a new insight to design COFs for ion capture.

Thiophene-Functionalized Cadmium(II)-Based Metal-Organic Frameworks for CO2 Adsorption with Gate-Opening Effect, Separation, and Catalytic Conversion

Two new porous three-dimensional cadmium(II) metal-organic frameworks (MOFs) containing thiophene-appended carboxylate acid ligands, formulated as [Cd(L1)(4,4'-Bipy)]n.2n(DMF) (1) and [Cd(L2)(4,4'-Bipy)]n.2n(DMF) (2) [where L1 = 5-{(thiophen-2-ylmethyl)amino}isophthalate, L2 = 5-{(thiophen-3-ylmethyl)amino}isophthalate, 4,4'-Bipy = 4,4'-bipyridine, and DMF = N,N'-dimethylformamide] have been synthesized and structurally characterized. The gas adsorption analysis of the activated MOFs shows that they specifically capture CO2 (uptake amount 4.36 mmol/g under 1 bar at 195 K) over N2 and CH4. Moreover, both MOFs show a gate-opening-closing phenomenon, which features the S-shaped isotherms with impressive hysteretic desorption during the CO2 adsorption-desorption process at 195 K. Ideal adsorbed solution theory (IAST) calculations of these MOFs displayed that the obtained selectivity values for CO2/CH4 (50:50) and CO2/N2 (15:85) are approximately 8.6-23 and 93-565, respectively. Configurational bias Monte Carlo simulation was performed to understand the mechanism behind the better CO2 adsorption by these MOFs. Catalytic activity of the MOFs for the CO2 fixation reactions with different epoxides to form cyclic carbonates were tested. These MOFs demonstrated a significantly high conversion (94-99%) of epichlorohydrin to the corresponding cyclic carbonate within 8 h of reaction time at 1 bar of CO2 pressure, at 70 °C, and they can be reused up to five cycles without losing considerably their activity.

Mining for Metal-Organic Systems: Chemistry Frontiers of Th-, U-, and Zr-Materials

The conceptual framework presented in this Perspective overviews the design principles of innovative thorium-based materials that could address urgent needs of the medicinal, nuclear energy, and waste remediation sectors from the lens of zirconium and uranium analogs. We survey the intersections of Zr, Th, and U chemistry with a focus on how the intrinsic behavior of each metal translates to broader material properties, including, but not limited to, structural and topological diversity, preferential metal-ligand binding, and reactivity. On the example of several classes of materials, including organometallic complexes, polyoxometalates, and the primary focus of this Perspective, metal-organic frameworks (MOFs), the design principles that govern the preparation of Zr-, Th-, and U-compounds, including oxophilicity, variation in oxidation states, and stable coordination environments have been considered. Further, we highlight how the impact of the mentioned variables may shift throughout the progression from discrete molecular systems to extended structures. We discuss the common assumption that zirconium-organic materials are typically considered a close analog of thorium-based congeners in areas such as material design and preparation. Through consideration of fundamental chemistry principles, we shed light on the relationships between Zr-, Th-, and U-based materials and highlight how a critical analysis of their distinct properties can be used to target a desired material performance. As a result, we provide a detailed understanding of Th-based materials chemistry by anchoring their fundamental properties between two well-studied reference points, zirconium- and uranium-containing analogs.

Defect-engineered chiral metal-organic frameworks

Chirality has an important impact on chemical and biological research, as most active substances are chiral. In recent decades, metal-organic frameworks (MOFs), which are assembled from metal ions or clusters and organic linkers via metal-ligand bonding, have attracted considerable scientific interest due to their high crystallinity, exceptional porosity and tunable pore sizes, high modularity, and diverse functionalities. Since the discovery of the first functional chiral metal-organic frameworks (CMOFs), CMOFs have been involved in a variety of disciplines such as chemistry, physics, optics, medicine, and pharmacology. The introduction of defect engineering theory into CMOFs allows the construction of a class of defective CMOFs with high hydrothermal stability and multi-stage pore structure. The introduction of defects not only increases the active sites but also enlarges the pore sizes of the materials, which improves chiral recognition, separation, and catalytic reactions, and has been widely investigated in various fields. This review describes the design and synthesis of various defective CMOFs, their characterization, and applications. Finally, the development of the materials is summarized, and an outlook is given. This review should provide researchers with an insight into the design and study of complex defective CMOFs.

One-step electrodeposition of MWCNTs-Cu MOF films for the ratiometric electrochemical analysis of glyphosate

Sensitive and accurate determination of glyphosate (GLYP) is vital for food safety and environmental protection. Herein, a novel electrochemical ratiometric biosensor was designed for the accurate quantification of GLYP through one-step electrodeposition of MWCNTs-Cu MOF films. MWCNTs-Cu MOF nanostructures were directly electro-synthesized in situ on the electrode from the precursor solution. The combination of Cu MOFs with MWCNTs not merely improved the conductivity of MOFs, but also enhanced the sensitivity of the biosensor. Furthermore, Cu sites within Cu MOFs were turned into CuCl to further amplify the current signal and enable the specific recognition of GLYP through competing reactions with the transformation of CuCl into non-electroactive Cu-GLYP. Meanwhile, internal reference molecules of methylene blue (MB) were incorporated to improve the measurement accuracy of GLYP for reducing unpredictable measurement errors aroused by environmental deviations. The ratiometric electrochemical sensor exhibited a high linearity with the logarithmic value of GLYP concentration from 0.5 nM to 400 nM. The detection limit was estimated to be as low as 0.014 nM. Finally, the present sensor with ratiometric signal export was applied for GLYP analysis in real samples with high sensitivity and accuracy. The simplicity and reliability of the ratiometric sensor make it a worthy and powerful tool for food and environmental monitoring. This design strategy also provides an avenue for the development of simple and efficient biosensors for other substances.

Separation of cyclohexanol from cyclohexanol/cyclohexene mixtures by crystals of pillar[6]arene containing three benzoquinone units

Here, we develop a new absorbent for efficient separation of cyclohexanol (CHA-ol) and cyclohexene (CHA-ene) by using crystals of pillar[6]arene with three benzoquinone units (P3QA). P3QA crystals are found to show remarkable selectivity for CHA-ol in 50 : 50 (v/v) CHA-ol : CHA-ene mixtures with a purity of 95.2%, along with vapochromic behavior.

Recent progress for chiral stationary phases based on chiral porous materials in high-performance liquid chromatography and gas chromatography separation

Chirality is a fundamental property of nature. Separation and analysis of racemates are of great importance in the fields of medicine and the production of chiral biopharmaceutical intermediates. Chiral chromatography has the characteristics of a wide separation range, fast separation speed, and high efficiency. The development and preparation of novel chiral stationary phases with good chiral recognition and separation capacity is the core and key of chiral chromatographic separation and analysis. In this work, the representative research progress of novel chiral porous crystal materials including chiral covalent organic frameworks, chiral porous organic cages, chiral metal-organic frameworks, and chiral metal-organic cages used as chiral stationary phases of capillary gas chromatography and high-performance liquid chromatography over the last 4 years is reviewed in detail. The chiral recognition and separation properties of the representative studies in this review are also introduced and discussed.

Platelet Membrane-Camouflaged Silver Metal-Organic Framework Biomimetic Nanoparticles for the Treatment of Triple-Negative Breast Cancer

Triple-negative breast cancer (TNBC) is characterized by high malignancy and limited treatment options. Given the pressing need for more effective treatments for TNBC, this study aimed to develop platelet membrane (PM)-camouflaged silver metal-organic framework nanoparticles (PM@MOF-Ag NPs), a biomimetic nanodrug. PM@MOF-Ag NP construction involved the utilization of 2-methylimidazole and silver nitrate to prepare silver metal-organic framework (MOF-Ag) NPs. The PM@MOF-Ag NPs, due to their camouflage, possess excellent blood compatibility, immune escape ability, and a strong affinity for 4T1 tumor cells. This enhances their circulation time in vivo and promotes the aggregation of PM@MOF-Ag NPs at the 4T1 tumor site. Importantly, PM@MOF-Ag NPs demonstrated promising antitumor activity in vitro and in vivo. We further revealed that PM@MOF-Ag NPs induced tumor cell death by overproducing reactive oxygen species and promoting cell apoptosis. Moreover, PM@MOF-Ag NPs enhanced apoptosis by upregulating the ratios of Bax/Bcl-2 and cleaved caspase3/pro-caspase3. Notably, PM@MOF-Ag NPs exhibited no significant organ toxicity, whereas the administration of MOF-Ag NPs resulted in liver inflammation compared to the control group.

Central Metal-Triggered Structural Transformation of a 2D Layered MOF: Mechanistic Studies and Applications

The structural transformation of metal-organic frameworks (MOFs) has attracted increasing interests, which has not only produced various new structures but also served as a fantastic platform for MOF-based kinetic analysis. Multiple reaction conditions have been documented to cause structural transformation; nevertheless, central metal-induced topological alteration of MOFs is rare. Herein, we reported a structural transformation of a 2D layered Cd-MOF driven by Cd(II) ions. After being submerged in the aqueous solution of cadmium nitrate, the twofold interpenetrated 2D network of [Cd(hsb-2)(bdc)·5H2O]n [HSB-W10; bdc: 1,4-benzenedicarboxylate; hsb-2:1,2-bis(4'-pyridylmethylamino)-ethane] was converted into a novel noninterpenetrated 2D network [Cd1.5(hsb-2)(bdc)1.5(H2O)2·H2O]n (HSB-W16). This partial dissolution-recrystallization process was investigated by integrating controlled experiments, 1H NMR spectra, and photographic tracking analysis. Furthermore, a novel strategy combining in situ multicomponent dye encapsulation and central metal-triggered structural transformation was developed for the fabrication of MOF materials with white-light emission. By adopting this strategy, different dye guest molecules were concurrently introduced into the HSB-W16 host matrix, leading to a range of white-light-emitting MOF composites. This work will enable detailed studies of solid-state transformations and demonstrate a promising application prospect for structural transformation.

Research Progress in the Degradation of Chemical Warfare Agent Simulants Using Metal-Organic Frameworks

Chemical warfare agents primarily comprise organophosphorus nerve agents, saliva alkaloids, cyanides, and mustard gas. Exposure to these agents can result in severe respiratory effects, including spasms, edema, and increased secretions leading to breathing difficulties and suffocation. Protecting public safety and national security from such threats has become an urgent priority. Porous metal-organic framework (MOF) materials have emerged as promising candidates for the degradation of chemical warfare agents due to their large surface area, tunable pore size distribution, and excellent catalytic performance. Furthermore, combining MOFs with polymers can enhance their elasticity and processability and improve their degradation performance. In this review, we summarize the literature of the past five years on MOF-based composite materials and their effectiveness in degrading chemical warfare agents. Moreover, we discuss key factors influencing their degradation efficiency, such as MOF structure, pore size, and functionalization strategies. Furthermore, we highlight recent developments in the design of MOF-polymer composites, which offer enhanced degradation performance and stability for practical applications in CWA degradation. These composite materials exhibit good performance in degrading chemical warfare agents, playing a crucial role in protecting public safety and maintaining national security. We can expect to see more breakthroughs in the application of metal-organic framework porous materials for degrading chemical warfare agents. It is hoped that these innovative materials will play a positive role in achieving social stability and security.

Anisotropic Thermal Conductivity Enhancement of the Aligned Metal-Organic Framework under Water Vapor Adsorption

Metal-organic frameworks (MOFs) exhibit high adsorption and catalytic activities for various gas species. Because gas adsorption can cause a temperature increase in the MOF, which decreases the capacity and adsorption rate, a strict evaluation of its effect on the thermal conductivity of MOFs is essential. In this study, the thermal conductivity measurement of the MOF under water vapor adsorption was performed using an oriented film of copper tetrakis(4-carboxyphenyl)porphyrin (Cu-TCPP) MOF. A recently developed bidirectional 3ω method enabled the anisotropic thermal conductivity measurement of layered Cu-TCPP while maintaining its ordered structure. The water adsorption was found to increase the thermal conductivity in both in-plane and cross-plane directions with different trends and magnitudes, owing to the structural anisotropy. Molecular dynamics simulations suggest that additional vibrational modes provided by the adsorbed water molecules were the reason for the thermal conductivity enhancement.

Boosting the degradation of antibiotics via peroxymonosulfate activation with a Cu-based metal-organic framework

Highly efficient degradation of antibiotics is a huge challenge due to the extremely stable molecules and the potential for biological resistance. However, conventional degradation methods are limited to lower degradation rate, higher energy consumption and secondary pollution. Herein, we report a new Cu-based metal-organic framework (MOF), featuring classical planar trinuclear [Cu3(µ3-O)]4+ clusters within the pores. The presence of the rich open metal sites and the large pore ratio, as well as the high catalytic activity of Cu2+ ions, are conducive to boosting the degradation of various antibiotics (>95%) under the activation of peroxymonosulfate. Remarkably, this is the first MOF to achieve such exceptional catalytic performance under neutral and even alkaline conditions, which exceeds those of most reported materials. Mechanism investigation demonstrates that multiple active species were produced and promoted the degradation synergistically during the advanced oxidation processes.

In Situ Construction of Highly Dispersed Pd on Cobalt Nanoparticle on Hollow Functional Cubic Graphene by Double Framework for ORR

Developing advanced functional carbon materials is essential for electrocatalysis, caused by their vast merits for boosting many key energy conversion reactions. Herein, the covalent organic frameworks (COFs) is utilized on metal-organic frameworks (MOFs) as the template, under the controllable metal atoms thermal migration process successfully in situ constructs Pd-Co alloy nanoparticles on hollow cubic graphene. The electrocatalytic oxygen reduction reaction (ORR) evaluation showed excellent performances with a half-wave potential of 0.866 V, and a limited current density of 4.975 mA cm-2, that superior to the commercial Pt/C and Co nanoparticles. The contrast experiments and X-ray absorption spectrum demonstrated the aggregated electrons at highly dispersed Pd atoms on Co nanoparticle that promoted the main activities. This work not only enlightens the novel carbon materials designing strategies but also suggests heterogeneous electrocatalysis.

Metal-Organic Frameworks in Surface Enhanced Raman Spectroscopy-Based Analysis of Volatile Organic Compounds

Volatile Organic Compounds (VOC) are a major class of environmental pollutants hazardous to human health, but also highly relevant in other fields including early disease diagnostics and organoleptic perception of aliments. Therefore, accurate analysis of VOC is essential, and a need for new analytical methods is witnessed for rapid on-site detection without complex sample preparation. Surface-Enhanced Raman Spectroscopy (SERS) offers a rapidly developing versatile analytical platform for the portable detection of chemical species. Nonetheless, the need for efficient docking of target analytes at the metallic surface significantly narrows the applicability of SERS. This limitation can be circumvented by interfacing the sensor surface with Metal-Organic Frameworks (MOF). These materials featuring chemical and structural versatility can efficiently pre-concentrate low molecular weight species such as VOC through their ordered porous structure. This review presents recent trends in the development of MOF-based SERS substrates with a focus on elucidating respective design rules for maximizing analytical performance. An overview of the status of the detection of harmful VOC is discussed in the context of industrial and environmental monitoring. In addition, a survey of the analysis of VOC biomarkers for medical diagnosis and emerging applications in aroma and flavor profiling is included.

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Terahertz Spectroscopy Unambiguously Determines the Orientation of Guest Water Molecules in a Structurally Elusive Metal-Organic Framework

Porous materials, particularly metal-organic frameworks (MOFs), hold great promise for advanced applications. MIL-53(Al) is an exceptionally well-studied MOF that exhibits a phase transition upon guest capture─in this case, water─resulting in a dramatic change in the pore volume. Despite extensive studies, the structure of the water-loaded narrow-pore phase, MIL-53(Al)-np, remains controversial, particularly with respect to the positions of the adsorbed water molecules. We use terahertz spectroscopy, coupled with powder X-ray diffraction and density functional theory simulations, to unambiguously resolve this controversy. We show that the low-frequency (<100 cm-1) vibrational spectrum depends on weak long-range forces that are extremely sensitive to the orientation of the adsorbed water molecules. This enables definitively determining the correct structure of MIL-53(Al)-np while highlighting the extreme sensitivity of terahertz spectroscopy to bulk structure, suggesting its potential as a robust complement to X-ray diffraction for precise characterization of host-guest complexes.

Multilayered Fe3O4@(ZIF-8)3 combined with a computer-vision-enhanced immunosensor for chloramphenicol enrichment and detection

The misuse and overuse of chloramphenicol poses severe threats to food safety and human health. In this work, we developed a magnetic solid-phase extraction (MSPE) pretreatment material coated with a multilayered metal-organic framework (MOF), Fe3O4 @ (ZIF-8)3, for the separation and enrichment of chloramphenicol from fish. Furthermore, we designed an artificial-intelligence-enhanced single microsphere immunosensor. The inherent ultra-high porosity of the MOF and the multilayer assembly strategy allowed for efficient chloramphenicol enrichment (4.51 mg/g within 20 min). Notably, Fe3O4 @ (ZIF-8)3 exhibits a 39.20% increase in adsorption capacity compared to Fe3O4 @ZIF-8. Leveraging the remarkable decoding abilities of artificial intelligence, we achieved the highly sensitive detection of chloramphenicol using a straightforward procedure without the need for specialized equipment, obtaining a notably low detection limit of 46.42 pM. Furthermore, the assay was successfully employed to detect chloramphenicol in fish samples with high accuracy. The developed immunosensor offers a robust point-of-care testing tool for safeguarding food safety and public health.

Molecular-Sieving Separation of Methanol/Benzene Azeotrope by a Flexible Metal-Organic Framework

Separation of methanol/benzene azeotrope mixtures is very challenging not only by the conventional distillation technique but also by adsorbents. In this work, we design and synthesize a flexible Ca-based metal-organic framework MAF-58 consisting of cheap raw materials. MAF-58 shows selective methanol-induced pore-opening flexibility. Although the opened pores are large enough to accommodate benzene molecules, MAF-58 shows methanol/benzene molecular sieving with ultrahigh experimental selectivity, giving 5.1 mmol g-1 high-purity (99.99%+) methanol and 2.0 mmol g-1 high-purity (99.97%+) benzene in a single adsorption/desorption cycle. Computational simulations reveal that the preferentially adsorbed, coordinated methanol molecules act as the gating component to selectively block the diffusion of benzene, offering a new gating adsorption mechanism.

Molecular-caged metal-organic frameworks for energy management

Metal-organic frameworks (MOFs) hold great promise for diverse applications when combined with polymers. However, a persistent challenge lies in the susceptibility of exposed MOF pores to molecule and polymer penetration, compromising the porosity and overall performance. Here, we design a molecular-caged MOF (MC-MOF) to achieve contracted window without sacrificing the MOF porosity by torsional conjugated ligands. These molecular cages effectively shield against the undesired molecule penetration during polymerization, thereby preserving the pristine porosity of MC-MOF and providing outstanding light and thermal management to the composites. The polymer containing 0.5 wt % MC-MOF achieves an 83% transmittance and an exceptional haze of 93% at 550 nanometers, coupled with remarkable thermal insulation. These MC-MOF/polymer composites offer the potential for more uniform daylighting and reduced energy consumption in sustainable buildings when compared to traditional glass materials. This work delivers a general method to uphold MOF porosity in polymers through molecular cage design, advancing MOF-polymer applications in energy and sustainability.

Host-Host Interactions Enhanced the Structural Rigidity in a 6-Fold Interpenetrated Diamondoid Metal-Organic Framework Exhibiting C2H2/C2H4 Separation

Multi-interpenetrated metal-organic frameworks (MOFs) have exhibited excellent performance in selective adsorption due to the variable post-interspersed flexibility, but the design and control remain challenging. Herein, two anthracene-based ligands, 4,4'-(anthracene-9,10-diyl)dibenzoic acid (H2L1) and 9,10-di(pyridin-4-yl)anthracene (L2), are used to construct a new three-dimensional 6-fold interpenetrated MOF [Zn(L1)(L2)]n (NBU-X1), which exhibits multiple C-H···π interactions that enhance the structural rigidity, thereby entangling with a C2H2/C2H4 separation performance. In this material, the incorporation of abundant anthracene rings within the framework not only partitions and restricts the pore window size to a quasi-double pore but also stabilizes it through host-host interactions. The structural stability upon heating or guest displacement/removal has been investigated by single-crystal X-ray diffraction and in situ variable-temperature powder X-ray diffraction, in contrast to the extreme flexibility of most multi-interpenetrated MOFs. The performance of purifying C2H4 from C2H2/C2H4 mixtures has been proved by dynamic breakthrough tests.

In-situ growth of metal-organic frameworks on cellulose nanofiber aerogels for rapid adsorption of heterocyclic aromatic amines

Heterocyclic aromatic amines (HAAs) are the main carcinogens produced during thermal processing of protein-rich foods. In this paper, a composite aerogel (TOCNFCa) with a stabilized dual-network structure was prepared via a template for the in-situ synthesis of UiO-66 on cellulose for the adsorption of HAAs in food. The dual-network structure of TOCNFCa provides the composite aerogel with excellent wet strength, maintaining excellent compressive properties. With the in-situ grown UiO-66 content up to 71.89 wt%, the hierarchical porosity endowed TOCNFCa@UiO-66 with the ability to rapidly adsorb HAAs molecules with high capacity (1.44-5.82 μmol/g). Based on excellent thermal stability, adsorption capacity and anti-interference, TOCNFCa@UiO-66 achieved satisfactory recoveries of HAAs in the boiled marinade, which is faster and more economical than the conventional SPE method. Moreover, TOCNFCa@UiO-66 could maintain 84.55 % of the initial adsorption capacity after 5 times of reuse.

Mechanism of efficient adsorption for arsenic in aqueous solution by zeolitic imidazolate framework‑8

Arsenic (As) is one extremely hazardous and carcinogenic metalloid element. Due to mining, metal smelting, and other human activities, the pollution of water (especially groundwater) and soil caused by As is increasingly serious, which badly threatens the environment and human health. In this study, a zeolite imidazolate framework (ZIF-8) was synthesized at room temperature and employed as an adsorbent to facilitate the adsorption of As(III) and As(V) from the solution. The successful synthesis of ZIF-8 was demonstrated by X-ray diffraction (XRD), and scanning electron microscopy (SEM) revealed that its particle size was approximately 80 nm. The adsorption kinetics, adsorption isotherm, solution pH, dose, coexisting ions, and the synonymous elements antimony (Sb) were conducted to study the adsorption of As by ZIF-8 nanoparticles. The maximum saturation adsorption capacity was determined to be 101.47 mg/g and 81.40 mg/g for As(III), and As(V) at initial pH = 7.0, respectively. Apparently, ZIF-8 had a good removal effect on As, and it still maintained a good performance after four cycles. The coexisting ions PO43- and CO32- inhibited the adsorption of both As(III) and As(V). ZIF-8 performed well in removing both As and Sb simultaneously, although the presence of Sb hindered the adsorption of both As(III) and As(V). Both FTIR and XPS indicated the adsorption mechanism of As on ZIF-8: ZIF-8 generates a large amount of Zn-OH on the surface through hydrolysis and partial fracture of Zn-N, both of which form surface complexes with As.

Imine-Decorated Copper-Based Metal-Organic Framework for the Photodegradation of Methylene Blue

A low cost imine-decorated linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid was utilized for the preparation of copper-based metal-organic framework (MOF) denoted as Cu-L via a solvothermal technique. The synthesized MOF material has been fully characterized by different analytical techniques such as Fourier-transform infrared (FT-IR) spectroscopy, powder X-Ray diffraction (PXRD), scanning electron microscopy (SEM), energy dispersive X-Ray spectroscopy (EDX), nitrogen adsorption-desorption isotherm analysis, and thermogravimetric analysis (TGA). It has been found that the coordination of Cu2+ with L considerably reduced the band gap of the L of nearly about 1 eV, which is approximately 26% decline in total. Notably, a narrow band gap of the photocatalyst is an essential requirement for the proficient photodegradation of organic contaminants. An excellent optical properties and narrow band gap of (2.8 eV) of Cu-L ensure their suitability as a photocatalyst for the degradation of methylene blue (MB) dye. In the presence of Cu-L photocatalyst, 84.22% degradation of MB dye was observed after 150 min under sunlight exposure. It is the first time that imine-functionalized MOF was utilized for the degradation of MB dye under sunlight irradiation. For understanding the photodegradation of MB dye by the Cu-L photocatalyst, all the plausible mechanistic studies have been carried out in detail. Both theoretical (with the help of density functional theory (DFT) calculations) as well as experimental studies have been conducted to justify the possible mechanisms for the photodegradation of MB dye by Cu-L. The current work may open a new opportunity to construct a cheap MOF-based photocatalysts for fast degradation of dye contaminants.

Cooperative and Bifunctional Adsorbent-Catalyst Materials for In-situ VOCs Capture-Conversion

Volatile organic compounds (VOCs) are gases that are emitted into the air from products or processes and are major components of air pollution that significantly deteriorate air quality and seriously affect human health. Different types of metals, metal oxides, mixed-metal oxides, polymers, activated carbons, zeolites, metal-organic frameworks (MOFs) and mixed-matrixed materials have been developed and used as adsorbent or catalyst for diversified VOCs detection, removal, and destruction. In this comprehensive review, we first discuss the general classification of VOCs removal materials and processes and outline the historical development of bifunctional and cooperative adsorbent-catalyst materials for the removal of VOCs from air. Subsequently, particular attention is devoted to design of strategies for cooperative adsorbent-catalyst materials, along with detailed discussions on the latest advances on these bifunctional materials, reaction mechanisms, long-term stability, and regeneration for VOCs removal processes. Finally, challenges and future opportunities for the environmental implementation of these bifunctional materials are identified and outlined with the intent of providing insightful guidance on the design and fabrication of more efficient materials and systems for VOCs removal in the future.

MOF/graphene oxide based composites in smart supercapacitors: a comprehensive review on the electrochemical evaluation and material development for advanced energy storage devices

The surge in interest surrounding energy storage solutions, driven by the demand for electric vehicles and the global energy crisis, has spotlighted the effectiveness of carbon-based supercapacitors in meeting high-power requirements. Concurrently, metal-organic frameworks (MOFs) have gained attention as a template for their integration with graphene oxide (GO) in composite materials which have emerged as a promising avenue for developing high-power supercapacitors, elevating smart supercapacitor efficiency, cyclic stability, and durability, providing crucial insights for overcoming contemporary energy storage obstacles. The identified combination leverages the strengths of both materials, showcasing significant potential for advancing energy storage technologies in a sustainable and efficient manner. In this research, an in-depth review has been presented, in which properties, rationale and integration of MOF/GO composites have been critically examined. Various fabrication techniques have been thoroughly analyzed, emphasizing the specific attributes of MOFs, such as high surface area and modifiable porosity, in tandem with the conductive and stabilizing features of graphene oxide. Electrochemical characterizations and physicochemical mechanisms underlying MOF/GO composites have been examined, emphasizing their synergistic interaction, leading to superior electrical conductivity, mechanical robustness, and energy storage capacity. The article concludes by identifying future research directions, emphasizing sustainable production, material optimization, and integration strategies to address the persistent challenges in the field of energy storage. In essence, this research article aims to offer a concise and insightful resource for researchers engaged in overcoming the pressing energy storage issues of our time through the exploration of MOF/GO composites in smart supercapacitors.

Considerable Piezochromism in All-Inorganic Zero-Dimensional Perovskite Nanocrystals via Pressure-Modulated Self-Trapped Exciton Emission

Piezochromic materials refer to a class of matters that alter their photoluminescence (PL) colors in response to the external stimuli, which exhibit promising smart applications in anti-counterfeiting, optoelectronic memory and pressure-sensing. However, so far, most reported piezochromic materials have been confined to organic materials or hybrid materials containing organic moieties with limited piezochromic range of less than 100 nm in visible region. Here, we achieved an intriguing piezochromism in all-inorganic zero-dimensional (0D) Cs3Cu2Cl5 nanocrystals (NCs) with a considerable piezochromic range of 232 nm because of their unique inorganic rigid structure. The PL energy shifted from the lowest-energy red fluorescence (1.85 eV) to the highest-energy blue fluorescence (2.83 eV), covering almost the entire visible wavelength range. Pressure-modulated self-trapped exciton emission between different energy levels of self-trapped states within Cs3Cu2Cl5 NCs was the main reason for this piezochromism property. Note that the quenched emission, which is over five times more intense than that in the initial state, is retained under ambient conditions upon decompression. This work provides a promising pressure indicating material, particularly used in pressure stability monitoring for equipment working at extreme environments.

Modulating the Primary and Secondary Coordination Spheres of Single Ni(II) Sites in Metal-Organic Frameworks for Boosting Photocatalysis

Though the coordination environment of single metal sites has been recognized to be of great importance in promoting catalysis, the influence of simultaneous precise modulation of primary and secondary coordination spheres on catalysis remains largely unknown. Herein, a series of single Ni(II) sites with altered primary and secondary coordination spheres have been installed onto metal-organic frameworks (MOFs) with UiO-67 skeleton, affording UiO-Ni-X-Y (X = S, O; Y = H, Cl, CF3) with X and Y on the primary and secondary coordination spheres, respectively. Upon deposition with CdS nanoparticles, the resulting composites present high photocatalytic H2 production rates, in which the optimized CdS/UiO-Ni-S-CF3 exhibits an excellent activity of 13.44 mmol g-1, ∼500 folds of the pristine catalyst (29.6 μmol g-1 for CdS/UiO), in 8 h, highlighting the key role of microenvironment modulation around Ni sites. Charge kinetic analysis and theoretical calculation results demonstrate that the charge transfer dynamics and reaction energy barrier are closely correlated with their coordination spheres. This work manifests the advantages of MOFs in the fabrication of structurally precise catalysts and the elucidation of particular influences of microenvironment modulation around single metal sites on the catalytic performance.

Strong Second-Harmonic Generation Induced by a Triphenylamine-Based Bismuth-Organic Framework for Photocatalytic Activity Enhancement

Taking advantage of the well-defined geometry of metal centers and highly directional metal-ligand coordination bonds, metal-organic frameworks (MOFs) have emerged as promising candidates for nonlinear optical (NLO) materials. In this work, taking a photoresponsive carboxylate triphenylamine derivative as an organic ligand, a bismuth-based MOF, Bi-NBC, NBC = 4',4‴,4‴″-nitrilotris(([1,1'-biphenyl]-4-carboxylic acid)) is obtained. Structure determination reveals that it is a potential NLO material derived from its noncentrosymmetric structure, which is finally confirmed by its rarely strong second harmonic generation (SHG) effect. Theoretical calculations reveal that the potential difference around Bi atoms is large; therefore, it leads to a strong local built-in electric field, which greatly facilitates the charge separation and transfer and finally improves the photocatalytic performance. Our results provide a reference for the exploration of MOFs with NLO properties.

Halogen-Decorated Metal-Organic Frameworks for Efficient and Selective CO2 Capture, Separation, and Chemical Fixation with Epoxides under Mild Conditions

In the present work, three novel halogen-appended cadmium(II) metal-organic frameworks [Cd2(L1)2(4,4'-Bipy)2]n·4n(DMF) (1), [Cd2(L2)2(4,4'-Bipy)2]n·3n(DMF) (2), and [Cd(L3)(4,4'-Bipy)]n·2n(DMF) (3) [where L1 = 5-{(4-bromobenzyl)amino}isophthalate; L2 = 5-{(4-chlorobenzyl)amino}isophthalate; L3 = 5-{(4-fluorobenzyl)amino}isophthalate; 4,4'-Bipy = 4,4'-bipyridine; and DMF = N,N'-dimethylformamide] have been synthesized under solvothermal conditions and characterized by various analytical techniques. The single-crystal X-ray diffraction analysis demonstrated that all the MOFs feature a similar type of three-dimensional structure having a binuclear [Cd2(COO)4(N)4] secondary building block unit. Moreover, MOFs 1 and 2 contain one-dimensional channels along the b-axis, whereas MOF 3 possesses a 1D channel along the a-axis. In these MOFs, the pores are decorated with multifunctional groups, i.e., halogen and amine. The gas adsorption analysis of these MOFs demonstrate that they display high uptake of CO2 (up to 5.34 mmol/g) over N2 and CH4. The isosteric heat of adsorption (Qst) value for CO2 at zero loadings is in the range of 18-26 kJ mol-1. In order to understand the mechanism behind the better adsorption of CO2 by our MOFs, we have also performed configurational bias Monte Carlo simulation studies, which confirm that the interaction between our MOFs and CO2 is stronger compared to those with N2 and CH4. Various noncovalent interactions, e.g., halogen (X)···O, Cd···O, and O···O, between CO2 and the halogen atom, the Cd(II) metal center, and the carboxylate group from the MOFs are observed, respectively, which may be a reason for the higher carbon dioxide adsorption. Ideal adsorbed solution theory (IAST) calculations of MOF 1 demonstrate that the obtained selectivity values for CO2/CH4 (50:50) and CO2/N2 (15:85) are ca. 28 and 193 at 273 K, respectively. However, upon increasing the temperature to 298 K, the selectivity value (S = 34) decreases significantly for the CO2/N2 mixture. We have also calculated the breakthrough analysis curves for all the MOFs using mixtures of CO2/CH4 (50:50) and CO2/N2 (50:50 and 15:85) at different entering gas velocities and observed larger retention times for CO2 in comparison with other gases, which also signifies the stronger interaction between our MOFs and CO2. Moreover, due to the presence of Lewis acidic metal centers, these MOFs act as heterogeneous catalysts for the CO2 fixation reactions with different epoxides in the presence of tetrabutyl ammonium bromide (TBAB), for conversion into industrially valuable cyclic carbonates. These MOFs exhibit a high conversion (96-99%) of epichlorohydrin (ECH) to the corresponding cyclic carbonate 4-(chloromethyl)-1,3-dioxolan-2-one after 12 h of reaction time at 1 bar of CO2 pressure, at 65 °C. The MOFs can be reused up to four cycles without compromising their structural integrity as well as without losing their activity significantly.

Spirobifluorene-Based Porous Organic Salts: Their Porous Network Diversification and Construction of Chiral Helical Luminescent Structures

Porous organic salts (POSs) are organic porous materials assembled via charge-assisted hydrogen bonds between strong acids and bases such as sulfonic acids and amines. To diversify the network topology of POSs and extend its functions, this study focused on using 4,4',4'',4'''-(9,9'-spirobi[fluorene]-2,2',7,7'-tetrayl)tetrabenzenesulfonic acid (spiroBPS), which is a tetrasulfonic acid comprising a square planar skeleton. The POS consisting of spiroBPS and triphenylmethylamine (TPMA) (spiroBPS/TPMA) was constructed from the two-fold interpenetration of an orthogonal network with pts topology, which has not been reported in conventional POSs, owing to the shape of the spirobifluorene backbone. Furthermore, combining tris(4-chlorophenyl)methylamine (TPMA-Cl) and tris(4-bromophenyl)methylamine (TPMA-Br), which are bulkier than TPMA owing to the introduction of halogens at the p-position of the phenyl groups with spiroBPS allows us to construct novel POSs (spiroBPS/TPMA-Cl and spiroBPS/TPMA-Br). These POSs were constructed from a chiral helical network with pth topology, which was induced by the steric hindrance between the halogens and the curved fluorene skeleton. Moreover, spiroBPS/TPMA-Cl with pth topology exhibited circularly polarized luminescence (CPL) in the solid state, which has not been reported in hydrogen-bonded organic frameworks (HOFs).

Synthesis and Application of Task-Specific Bimetal-Organic Frameworks in the Synthesis of Biological Active Spiro-Oxindoles

The use of click chemistry as a smart and suitable method for the development of new heterogeneous catalysts is based on metal-organic frameworks as well as the production of organic compounds. The development of the click chemistry method can provide a new strategy to achieve superior properties of MOFs. Here, the two metals Co and Fe are used to create a bimetallic-organic framework. In the following, the click chemistry and postmodification method are well organized and an acidic heterogeneous porous catalyst is developed. This prepared catalyst was used as a highly efficient catalyst for the preparation of new spiro-oxindoles obtained through click chemistry with good to excellent yields (80-94%). This presented catalytic system can compete with the best reported catalytic systems. The findings showed that the presence of Co and Fe metals in the MOF, and the presence of the triazole ring on the catalyst, can increase the catalytic efficiencies. This study offers novel insights into the architecture of Metal-Organic Frameworks (MOFs), click chemistry, and biologically active compounds. Additionally, the research explores the antibacterial properties of the synthesized spiro-oxindoles and catalysts. The findings reveal significant antibacterial activities of the synthesized compounds against S. aureus, MRSA, and E. coli bacteria.

A Multivariate 2D Metal-Organic Framework with Open Metal Sites for Catalytic CO2 Cycloaddition and Cyanosilylation Reactions

This work reports the synthesis of a dual functional 2D framework, {[Zn2(4-tpom)2(oxdz)2]·4H2O}n (1), at room temperature, where a bent dicarboxylate, oxdz2- (4,4'-(1,3,4-oxadiazole-2,5-diyl)dibenzoate), and a neutral flexible N-donor linker, 4-tpom (tetrakis(4-pyridyloxymethylene)methane), are utilized. Its single-crystal X-ray analysis indicated a 2-fold interpenetrated 2D framework having tetracoordinated Zn(II) centers and dangling pyridyl groups. Its further characterization was carried out with elemental microanalysis, FTIR spectroscopy, TG analysis, and powder X-ray diffraction. The tetracoordinated Zn(II) centers as active Lewis acidic sites and the N atoms of 4-tpom as Lewis basic sites in 1 are explored for its functioning as a heterogeneous catalyst in two important reactions, (i) cycloaddition of CO2 with various epoxides and (ii) cyanosilylation reaction under solvent-free conditions. We could successfully show the cycloaddition of styrene oxide with CO2 (99% conversion) under balloon pressure with low catalyst (0.2-0.3 mol %) and cocatalyst (0.5-0.75 mol %) loadings, which is otherwise difficult to achieve. It was observed that all the substrates (aromatic and aliphatic), irrespective of their sizes, showed conversion percentage >99%. In the cyanosilylation reaction, a conversion of 96% was obtained with 1.5 mol % of 1 at room temperature for 12 h. This framework emerged as an excellent recyclable catalyst for both the reactions.

A stable Mn(II) coordination polymer demonstrating proton conductivity and quantitative sensing of oxytetracycline in aquaculture

The construction and investigation of dual-functional coordination polymers (CPs) with proton conduction and luminescence sensing is of great significance in clean energy and agricultural monitoring fields. In this work, an Mn-based coordination polymer (Mn-CP), namely, [Mn0.5(HL)] (H2L = HOOCC6H4C6H4CH2PO(OH)OCH3), was hydrothermally synthesized. Mn-CP has a one-dimensional (1D) chain structure, in which uncoordinated -COOH groups can serve as potential sites for fluorescence sensing. Moreover, Mn-CP shows good water and pH stabilities, offering the feasibility for proton conduction and sensing applications. Mn-CP displays comparatively high proton conductivity of 1.07 × 10-4 S cm-1 at 368 K and 95% relative humidity (RH), which is promising for proton conduction materials. Moreover, it can serve as a repeatable, highly selective, and visualized fluorescence sensor for detecting oxytetracycline (OTC). More importantly, Mn-CP reveals an amazing quantitative sensing of OTC in actual samples such as seawater, aquaculture freshwater, soil infiltration solutions, and tap water. This work proves the excellent application potential of dual-functional CPs in the field of clean energy and environmental protection, especially for the fluorescence detection of antibiotics in aquaculture systems.

Subtle 2D/2D MXene-Based Heterostructures for High-Performance Electrocatalytic Water Splitting

Developing efficient electrocatalysts is significant for the commercial application of electrocatalytic water splitting. 2D materials have presented great prospects in electrocatalysis for their high surface-to-volume ratio and tunable electronic properties. Particularly, MXene emerges as one of the most promising candidates for electrocatalysts, exhibiting unique advantages of hydrophilicity, outstanding conductivity, and exceptional stability. However, it suffers from lacking catalytic active sites, poor oxidation resistance, and easy stacking, leading to a significant suppression of the catalytic performance. Combining MXene with other 2D materials is an effective way to tackle the aforementioned drawbacks. In this review, the focus is on the accurate synthesis of 2D/2D MXene-based catalysts toward electrocatalytic water splitting. First, the mechanisms of electrocatalytic water splitting and the relative properties and preparation methods of MXenes are introduced to offer the basis for accurate synthesis of 2D/2D MXene-based catalysts. Then, the accurate synthesis methods for various categories of 2D/2D MXene-based catalysts, such as wet-chemical, phase-transformation, electrodeposition, etc., are systematically elaborated. Furthermore, in-depth investigations are conducted into the internal interactions and structure-performance relationship of 2D/2D MXene-based catalysts. Finally, the current challenges and future opportunities are proposed for the development of 2D/2D MXene-based catalysts, aiming to enlighten these promising nanomaterials for electrocatalytic water splitting.

Multiresponsive luminescent sensors for antibiotics and CrVI with two luminescent ZnII/CdII coordination complexes

Two new ZnII/CdII luminescent coordination polymers (CPs) based on the V-shaped bis(imidazole) ligand 3,6-bis (1H-benzo[d]imidazol-1-yl)-9-methyl-9H-carbazole (bbimc) with [1,1'-biphenyl]-4,4'-dicarboxylic acid ligand (H2bpdc) have been synthesized under solvothermal conditions: {[Zn(bbimc)(bpdc)]·DMF·2.5H2O} (CP 1), {[Cd(bbimc)(bpdc)]·2DMF} (CP 2). CP 1 and CP 2 both display a uninodal 4-c unimodal sql topology 2D framework with vertex symbols of {44·62}. In addition, the two identical 2D nets of CP 2 were interpenetrated each other to form a 2D + 2D → 3D and generate a 2-fold interpenetrating architecture. Moreover, sensing investigations of CP 1 and CP 2 revealed that both of compounds can be used as a highly sensitive and selective multi-responsive luminescent sensor for sensing Cr2O72-, CrO42- and antibiotics (TC: Tetracycline; CTC: Chlortetracycline) in H2O by exhibiting fluorescence quenching with significant quenching constants (Ksv = 1.369 × 104 M-1 (Cr2O72-), 2.003 × 104 M-1 (CrO42-), 5.343 × 104 M-1 (TC), 8.706 × 104 M-1 (CTC) for CP 1 and 4.452 × 104 M-1 (Cr2O72-), 2.119 × 104 M-1 (CrO42-), 4.175 × 104 M-1 (TC), 1.257 × 105 M-1 (CTC) for CP 2). The detection limit are 0.67 μM (Cr2O72-), 0.48 μM (Cr2O72-), 0.23 μM (TC), 0.14 μM (CTC) for CP 1 and 0.28 μM (Cr2O72-), 0.54 μM (CrO42-), 0.31 μM (TC), 0.098 μM (CTC) for CP 2, respectively. In addition, the probable fluorescence quenching mechanism was studied through experiment and theoretical calculation and the co-existance of competitive absorption (CA) and photoinduced electron transfer (PET) progress contributed to such sensing processes.

Sustainable Dual-Ion Batteries beyond Li

The limitations of resources used in current Li-ion batteries may hinder their widespread use in grid-scale energy storage systems, prompting the search for low-cost and resource-abundant alternatives. "Beyond-Li cation" batteries have emerged as promising contenders; however, they confront noteworthy challenges due to the scarcity of suitable host materials for these cations. In contrast, anions, the other crucial component in electrolytes, demonstrate reversible intercalation capacity in specific materials like graphite. The convergence of anion and cation storage has given rise to a new battery technology known as dual-ion batteries (DIBs). This comprehensive review presents the current status, advancements, and future prospects of sustainable DIBs beyond Li. Notably, most DIBs exhibit similar cathode reaction mechanisms involving anion intercalation, while the distinguishing factor lies in the cation types functioning at the anode. Accordingly, the review is organized into sections by various cation types, including Na-, K-, Mg-, Zn-, Ca-, Al-, NH4 + -, and proton-based DIBs. Moreover, a perspective on these novel DIBs is presented, along with proposed protocols for investigating DIBs and promising future research directions. It is envisioned that this review will inspire fresh concepts, ideas, and research directions, while raising important questions to further tailor and understand sustainable DIBs, ultimately facilitating their practical realization.

Construction of Highly Luminescent Lanthanide Coordination Polymers and Their Visualization for Luminescence Sensing

NaH2SIP was selected as an organic ligand (NaH2SIP = 5-sulfoisophthalic acid monosodium salt). We successfully constructed a new class of lanthanide coordination polymers Ln-HS ([Ln(SIP)(DMF)(H2O)4]DMF·H2O; Ln = Eu, Tb, Sm, and Dy) by a simple solvothermal synthesis method. They exhibited excellent photoluminescence properties for Ln3+ ions, where Eu-HS and Tb-HS exhibited high quantum yields of 13.70 and 42.38%, respectively. The codoped lanthanide coordination polymers obtained by doping with different ratios of Eu3+/Tb3+ serve as excellent ratiometric thermometers with high sensitivities in the physiological temperature range, with values of 16.8, 7.0, and 14.5%·K-1, respectively. The luminescent colors of Tb0.95Eu0.05-HS and Tb0.94Eu0.06-HS exhibit variations from green to yellow to orange, achieving visualized luminescence in a narrow temperature range. The composite film material Tb0.94Eu0.06-HS@PMMA demonstrates this color variation. Next, Tb0.5Sm0.5-HS obtained by Tb3+/Sm3+ codoping was investigated. The difference in the luminescence colors visible to the naked eye at different excitation wavelengths and the change in luminescence colors occur in a very narrow temperature range. All of them show the great value of the visualized luminescence in practical anticounterfeiting, with double anticounterfeiting function and high security.

Photosynthetic System Based on a Polyoxometalate-Based Dehydrated Metal-Organic Framework for Nitrogen Fixation

In nature, biological nitrogen fixation is accomplished through the π-back-bonding mechanism of nitrogenase, which poses significant challenges for mimic artificial systems, thanks to the activation barrier associated with the N≡N bond. Consequently, this motivates us to develop efficient and reusable photocatalysts for artificial nitrogen fixation under mild conditions. We employ a charge-assisted self-assembly process toward encapsulating one polyoxometalate (POM) within a dehydrated Zr-based metal-organic framework (d-UiO-66) exhibiting nitrogen photofixation activities, thereby constructing an enzyme-mimicking photocatalyst. The dehydration of d-UiO-66 is favorable for facilitating nitrogen chemisorption and activation via the unpaired d-orbital electron at the [Zr6O6] cluster. The incorporation of POM guests enhanced the charge separation in the composites, thereby facilitating the transfer of photoexcited electrons into the π* antibonding orbital of chemisorbed N2 for efficient nitrogen fixation. Simultaneously, the catalytic efficiency of SiW9Fe3@d-UiO-66 is enhanced by 9.0 times compared to that of d-UiO-66. Moreover, SiW9Fe3@d-UiO-66 exhibits an apparent quantum efficiency (AQE) of 0.254% at 550 nm. The tactics of "working-in-tandem" achieved by POMs and d-UiO-66 are extremely vital for enhancing artificial ammonia synthesis. This study presents a paradigm for the development of an efficient artificial catalyst for nitrogen photofixation, aiming to mimic the process of biological nitrogen fixation.

Fabrication of Two-Dimensional Homo-Bimetallic Porphyrin Framework Thin Films for Optimizing Nonlinear Optical Limiting

Developing efficient metal-organic framework (MOF) optical devices with tunable third-order nonlinear optical (NLO) properties is an important challenge for scientific research and practical application. Herein, 2D monometallic and hetero/homo-bimetallic porphyrin MOF thin films (ZnTCPP(M) M = H2, Fe, Zn) were fabricated using the liquid-phase epitaxial (LPE) layer-by-layer (LBL) method to investigate the metal substitution dependent third-order NLO behavior. The prepared homo-bimetallic ZnTCPP(Zn) thin film exhibited enhanced third-order NLO performance with a higher third-order nonlinear susceptibility of ∼4.21 × 10-7 esu compared to monometallic and hetero-bimetallic counterparts. Additionally, theoretical calculations were performed to complement the experimental findings and revealed that the enhanced NLO effect of the ZnTCPP(Zn) thin film is mainly attributed to the enhanced local excitation. These findings not only provide a comprehensive understanding of the relationship between metal types and the NLO behavior of porphyrin MOF thin films but also offer valuable insights into the design and optimization of NLO devices.

Stability of Zr-Based UiO-66 Metal-Organic Frameworks in Basic Solutions

Although Zr-based metal-organic frameworks (MOFs) exhibit robust chemical and physical stability in the presence of moisture and acidic conditions, their susceptibility to nucleophilic attacks from bases poses a critical challenge to their overall stability. Herein, we systematically investigate the stability of Zr-based UiO-66 (UiO = University of Oslo) MOFs in basic solutions. The impact of 11 standard bases, including inorganic salts and organic bases, on the stability of these MOFs is examined. The destruction of the framework is confirmed through powder X-ray diffraction (PXRD) patterns, and the monitored dissolution of ligands from the framework is assessed using nuclear magnetic resonance (NMR) spectroscopy. Our key findings reveal a direct correlation between the strength and concentration of the base and the destruction of the MOFs. The summarized data provide valuable insights that can guide the practical application of Zr-based UiO-66 MOFs under basic conditions, offering essential information for their optimal utilization in various settings.

Solvent- and pH-Stable Eu(III)-Based Metal-Organic Framework with Phosphate-Ratio Fluorescence Sensing and Significant Proton Conduction

Lanthanide-based metal-organic frameworks show good potential for applications due to their unique structures and functional properties. A highly thermally and acid-base stable Eu-MOF was synthesized by a solvothermal method with the molecular formula {[(CH3)2NH2]2[Eu2(NDDP)2(H2O)2]·H2O}n (Eu-MOF, H4NDDP = 5,5'-(naphthalene-2,6-diyl)diisophthalic acid). Eu-MOF takes a three-dimensional (4,4,8)-connected topology. The water molecules involved in the coordination, free water molecules, and [(CH3)2NH2]+ cations in the pore can be used as proton carriers. The proton conductivity attains 1.25 × 10-4 S cm-1 at room temperature and 2.42 × 10-3 S cm-1 at 70 °C and 98% relative humidity. Combined with the dual-emission properties from the ligands and Eu(III) ions enables Eu-MOF to be used as a ratiometric fluorescent sensor for phosphate efficiently and rapidly, with a limit of detection of 0.12 μM in the Tris-HCl buffer solution. These results provide a new approach for the construction of MOFs with high proton conductivity and a ratiometric fluorescence response.

Endogenous metal-ion dynamic nuclear polarization for NMR signal enhancement in metal organic frameworks

Rational design of metal-organic framework (MOF)-based materials for catalysis, gas capture and storage, requires deep understanding of the host-guest interactions between the MOF and the adsorbed molecules. Solid-State NMR spectroscopy is an established tool for obtaining such structural information, however its low sensitivity limits its application. This limitation can be overcome with dynamic nuclear polarization (DNP) which is based on polarization transfer from unpaired electrons to the nuclei of interest and, as a result, enhancement of the NMR signal. Typically, DNP is achieved by impregnating or wetting the MOF material with a solution of nitroxide biradicals, which prevents or interferes with the study of host-guest interactions. Here we demonstrate how Gd(iii) ions doped into the MOF structure, LaBTB (BTB = 4,4',4''-benzene-1,3,5-triyl-trisbenzoate), can be employed as an efficient polarization agent, yielding up to 30-fold 13C signal enhancement for the MOF linkers, while leaving the pores empty for potential guests. Furthermore, we demonstrate that ethylene glycol, loaded into the MOF as a guest, can also be polarized using our approach. We identify specific challenges in DNP studies of MOFs, associated with residual oxygen trapped within the MOF pores and the dynamics of the framework and its guests, even at cryogenic temperatures. To address these, we describe optimal conditions for carrying out and maximizing the enhancement achieved in DNP-NMR experiments. The approach presented here can be expanded to other porous materials which are currently the state-of-the-art in energy and sustainability research.

Identifying pathways to metal-organic framework collapse during solvent activation with molecular simulations

Metal-organic framework (MOF) materials are a vast family of nanoporous solids with potential applications ranging from drug delivery to environmental remediation. Application of MOFs in these scenarios is hindered, however, by difficulties in MOF 'activation' after initial synthesis - removal of the synthesis solvent from the pores to make the pore space accessible - often leading to framework collapse if improperly performed. While experimental studies have correlated collapse to specific solvent properties and conditions, the mechanism of activation-collapse is currently unknown. Developing this understanding would enable researchers to create better activation protocols for MOFs, accelerating discovery and process intensification. To achieve this goal, we simulated solvent removal using grand-canonical Monte Carlo and free energy perturbation methods. By framing activation as a fluid desorption problem, we investigated activation processes in the isoreticular metal organic framework (IRMOF) family of MOFs for different solvents. We identified two pathways for solvent activation - the solvent either desorbs uniformly from each individual pore or forms coexisting phases during desorption. These mesophases in turn lead to large capillary stresses within the framework, corroborating experimental hypotheses for the cause of activation-collapse. Finally, we found that the activation energy of solvent removal increased with pore size and connectivity due to the increased stability of solvent mesophases, matching experimental findings. Using these simulations, it is possible to screen MOF activation procedures, enabling rapid identification of ideal solvents and conditions and thus enabling faster development of MOFs for practical applications.

A smartphone-based visual ratiometric fluoroprobe for rapid and sensitive detection hypochlorous acid based on dual-emission metal organic frameworks

Herein, we designed/developed a mixed fluorescence system with europium metal-organic framework (EDB) and zinc metal-organic framework (ZBNB). At the 270-nm excitation wavelength, the EDB-ZBNB dually emitted at 425 and 615 nm and displayed blue solution under 365-nm UV lamp. When HOCl was fortified, the 425-nm blue emission dropped progressively, while the 615-nm red emission was relatively stable. Upon addition of ClO-, the shortened fluorescence lifetime demonstrated that the quenched 425-nm fluorescence of ZBNB was owing to the occurrence of dynamic quenching effect. Besides, amino groups are protonated in water to form -NH3+, which interact with ClO- to form hydrogen bonds, reduce the distance between -NH3+ and ClO-, produce energy transfer and result in fluorescence quenching. The ratiometric fluoroprobe provided a significant color change from blue to red, making HOCl detection visual and rapid. This fluorescent probe overcome the disadvantage of conventional redox-based fluorescent probes that can be interfered by MnO4- and other oxidants with stronger oxidizing capacity than free ClO-. Furthermore, a smartphone-based portable sensing platform was developed based on EDB-ZBNB. By using a "Thingidentify" software on smartphone, the sensing platform was used to detect HOCl in waters with a low detection limit of 28.0 nM and the fortified recoveries of 98.87-103.60%. Thus, this study provides a novel and promising platform for the detection of free ClO- in monitoring water quality.

Nanoreactor-based catalytic systems for therapeutic applications: Principles, strategies, and challenges

Inspired by natural catalytic compartments, various synthetic compartments that seclude catalytic reactions have been developed to understand complex multistep biosynthetic pathways, bestow therapeutic effects, or extend biosynthetic pathways in living cells. These emerging nanoreactors possessed many advantages over conventional biomedicine, such as good catalytic activity, specificity, and sustainability. In the past decade, a great number of efficient catalytic systems based on diverse nanoreactors (polymer vesicles, liposome, polymer micelles, inorganic-organic hybrid materials, MOFs, etc.) have been designed and employed to initiate in situ catalyzed chemical reactions for therapy. This review aims to present the recent progress in the development of catalytic systems based on nanoreactors for therapeutic applications, with a special emphasis on the principles and design strategies. Besides, the key components of nanoreactor-based catalytic systems, including nanocarriers, triggers or energy inputs, and products, are respectively introduced and discussed in detail. Challenges and prospects in the fabrication of therapeutic catalytic nanoreactors are also discussed as a conclusion to this review. We believe that catalytic nanoreactors will play an increasingly important role in modern biomedicine, with improved therapeutic performance and minimal side effects.

Metal-organic framework (UiO-66 and UiO-66-NH2)-based adsorbents for bilirubin removal used in hemoperfusion

Excessive accumulation of bilirubin in patients with hyperbilirubinemia can lead to tissue and organ damage and neurological diseases, and is even life-threatening in severe cases. Hemoperfusion is an effective method for removing bilirubin, but clinically used hemoperfusion adsorbents have unsatisfactory adsorption capacity and kinetics. In order to obtain a safe and efficient bilirubin adsorbent, Zr-based Metal-Organic Framework (MOF) material UiO-66 with high specific surface area and aqueous medium stability was prepared and modified with varying degrees of amination to improve its adsorption capacity. According to adsorption experiments in aqueous solution and simulated plasma, it was confirmed that the unsaturated coordinated zirconium in UiO-66 can effectively induce the aggregation and precipitation of free bilirubin unbound to albumin and the amino group on UiO-66-NH2 has a strong affinity for albumin bound bilirubin. The adsorption effect of UiO-66-NH2 with a high degree of amino modification is significantly stronger than that of UiO-66-NH2 with a low degree of modification. In simulated plasma with a bilirubin concentration of 40 mg dL-1, the adsorption capacities of UiO-66 and UiO-66-NH2-1.9 can reach 69.08 mg g-1 and 81.13 mg g-1. The adsorption isotherm fitting and adsorption kinetics fitting results also show that UiO-66 and UiO-66-NH2 are good adsorbents for bilirubin. In dynamic adsorption, the adsorbents also showed good performance and did not affect the protein in the plasma. The hemolysis test, coagulation time test, and cytotoxicity test confirmed that the bilirubin adsorbents based on UiO-66 and UiO-66-NH2 have good blood compatibility and biocompatibility. This study provides new ideas for the development of a novel bilirubin adsorbent and a theoretical basis for the study of bilirubin adsorption mechanisms.

Solution Shearing of Zirconium (Zr)-Based Metal-Organic Frameworks NU-901 and MOF-525 Thin Films for Electrocatalytic Reduction Applications

Solution shearing, a meniscus-guided coating process, can create large-area metal-organic framework (MOF) thin films rapidly, which can lead to the formation of uniform membranes for separations or thin films for sensing and catalysis applications. Although previous work has shown that solution shearing can render MOF thin films, examples have been limited to a few prototypical systems, such as HKUST-1, Cu-HHTP, and UiO-66. Here, we expand on the applicability of solution shearing by making thin films of NU-901, a zirconium-based MOF. We study how the NU-901 thin film properties (i.e., crystallinity, surface coverage, and thickness) can be controlled as a function of substrate temperature and linker concentration. High fractional surface coverage of small-area (∼1 cm2) NU-901 thin films (0.88 ± 0.06) is achieved on a glass substrate for all conditions after one blade pass, while a low to moderate fractional surface coverage (0.73 ± 0.18) is obtained for large-area (∼5 cm2) NU-901 thin films. The crystallinity of NU-901 crystals increases with temperature and decreases with linker concentration. On the other hand, the adjusted thickness of NU-901 thin films increases with both increasing temperature and linker concentration. We also extend the solution shearing technique to synthesize MOF-525 thin films on a transparent conductive oxide that are useful for electrocatalysis. We show that Fe-metalated MOF-525 films can reduce CO2 to CO, which has implications for CO2 capture and utilization. The demonstration of thin film formation of NU-901 and MOF-525 using solution shearing on a wide range of substrates will be highly useful for implementing these MOFs in sensing and catalytic applications.