Microfluidic point-of-care device for detection of early strains and B.1.1.7 variant of SARS-CoV-2 virus

Portable, quantitative, real-time isothermal nucleic acid amplification test using microfluidic device-coupled UV-LED photodiode detector

We report a stand-alone, automated, fully quantitative, and portable Microfluidics Integrated LED-Photodiode (MILP) sensing technology as a new molecular diagnostic platform for rapid point-of-care nucleic acid testing in real-time. The all-in-one device integrates a paper-based assay for nucleic acid purification using a polymer-based membrane filter, in-situ isothermal amplification, dual-mode optical detection, and fully quantitative signal analysis by capturing the photovoltaic response using electrical polarity and photocurrent measurements. Highly selective photovoltaic cut-offs may readily recognize test-gene-specific variations quantitatively without requiring further auxiliary instrumentation. The on-cartridge limit of detection (LoD) showed 10 copies/μL, which could diagnose SARS-CoV-2 samples with high clinical sensitivity (95%) and specificity (100%) with reference to real-time PCR-based gold-standard benchmark. Our findings emphasize the test's unique advantages for intensive health surveillance, enabling early disease screening, precise severity assessment, and real-time tracking of disease progression in resource-limited settings without the need for extensive and expensive laboratory infrastructure.

Review on biphasic blood drying method for rapid pathogen detection in bloodstream infections

Rapid and accurate detection of pathogenic microorganisms in blood is critical for diagnosing life-threatening conditions such as bloodstream infections (BSIs). Current methods for the detection and identification of bacteria from large volumes of blood (5 mL) involve culture steps followed by DNA extraction/purification/concentration and Polymerase Chain Reaction (PCR)-based nucleic acid amplification. DNA extraction and amplification directly from blood samples is hampered by the complexity of the blood matrix, resulting in time-consuming and labor-intensive processes. This review delves into recent advancements in molecular diagnostics based on blood drying, coined as 'biphasic reaction', and highlights this new technique that attempts to overcome the limitations of traditional sample preparation and amplification processes. The biphasic blood drying method, in combination with isothermal amplification methods such as loop-mediated isothermal amplification (LAMP) or recombinase polymerase amplification (RPA), has recently been shown to improve the sensitivity of detection of bacterial, viral, and fungal pathogens from ∼1 mL of whole blood, while minimizing DNA loss and avoiding the use of extraction/purification/concentration kits. Furthermore, the biphasic approach in combination with LAMP has been shown to be a culture-free method capable of detecting bacteria in clinical samples with a sensitivity of ∼1 CFU/mL in ∼2.5 h. This represents a significant reduction in detection and identification time compared to current clinical procedures based on bacterial culture prior to PCR amplification. This review paper aims to be a guide to identify new opportunities for future advancements and applications of the biphasic technology.

Amplification-free, OR-gated CRISPR-Cascade reaction for pathogen detection in blood samples

Rapid and accurate detection of DNA from disease-causing pathogens is essential for controlling the spread of infections and administering timely treatments. While traditional molecular diagnostics techniques like PCR are highly sensitive, they include nucleic acid amplification and many need to be performed in centralized laboratories, limiting their utility in point-of-care settings. Recent advances in CRISPR-based diagnostics (CRISPR-Dx) have demonstrated the potential for highly specific molecular detection, but the sensitivity is often constrained by the slow trans-cleavage activity of Cas enzymes, necessitating preamplification of target nucleic acids. In this study, we present a CRISPR-Cascade assay that overcomes these limitations by integrating a positive feedback loop that enables nucleic acid amplification-free detection of pathogenic DNA at atto-molar levels and achieves a signal-to-noise ratio greater than 1.3 within just 10 min. The versatility of the assay is demonstrated through the detection of bloodstream infection pathogens, including Methicillin-Sensitive Staphylococcus aureus (MSSA), Methicillin-Resistant Staphylococcus aureus (MRSA), Escherichia coli, and Hepatitis B Virus (HBV) spiked in whole blood samples. Additionally, we introduce a multiplexing OR-function logic gate, further enhancing the potential of the CRISPR-Cascade assay for rapid and accurate diagnostics in clinical settings. Our findings highlight the ability of the CRISPR-Cascade assay to provide highly sensitive and specific molecular detection, paving the way for advanced applications in point-of-care diagnostics and beyond.

Multiplexed detection of respiratory virus RNA using optical pH sensors and injection-molded centrifugal microfluidics

The application is demonstrated of injection-molded centrifugal microfluidic chips with integrated optical pH sensors for multiplexed detection of respiratory syndrome coronavirus 2 (SARS-CoV-2), influenza A, and influenza B RNA. The optical pH sensors generated sensitive fluorescent readouts from diagnostic reverse transcription loop-mediated isothermal amplification (RT-LAMP) reactions; limits of detection for influenzas A and B, and SARS-CoV-2 of 89, 245, and 38 RNA copies per reaction, respectively, were attained. Results were obtainable within 44 min for SARS-CoV-2 and influenza A, and 48 min for influenza B. We implemented a data processing strategy based on numerical derivatives of the fluorescence curves that allowed for reliable, quantitative thresholds for deciding reaction outcomes and enabled 100% specificity. This work demonstrates the utility of optical pH sensors and injection-molded centrifugal microfluidics for multiplexed infectious disease diagnostics with point-of-care applications.

Development of a portable multi-step microfluidic device for point-of-care nucleic acid diagnostics

BACKGROUND

The COVID-19 pandemic has significantly affected global health, economies, and societies, and highlighted the urgent need for rapid, sensitive, affordable, and portable diagnostic devices for respiratory diseases, especially in areas with limited resources. In recent years, there has been rapid development in integrated equipments using microfluidic chips and biochemical detection technologies. However, these devices are expensive and complex to operate, showing limited feasibility for in point of care tests (PoCTs). This study aims to develop a cost-effective, portable, and practical microfluidic nucleic acid PoCT device for rapid virus diagnosis.

RESULTS

Here, we developed a device based on freeze-dried reverse transcription loop-mediated isothermal amplification (RT-LAMP) reagents for rapid nucleic acid diagnostics. Homebrew RT-LAMP reagents were optimized to eliminate non-specific amplification. The multi-step device combines nucleic acid extraction, RT-LAMP and fluorescence detection in an integrated microfluidic chip, enabling sample-in, result-out diagnosis. This device showed satisfactory sensitivity in detecting SARS-CoV-2 and Trichomonas vaginalis RNA samples, with a limit of detection (LOD) of 400 copies/μL and 80 copies/μL respectively in 45 min. The LOD of cultured Trichomonas vaginalis samples were 0.32 cells/μL in 50 min. Additionally, the freeze-dried homebrew RT-LAMP can be stored at 4 °C for up to 30 days while still maintaining high sensitivity and detection capabilities. The cost of diagnosis was reduced to as low as 0.45 $ per reaction.

SIGNIFICANCE AND NOVELTY

Overall, by integrating freeze-dried homebrew RT-LAMP and microfluidic chip, the device achieves ready-to-use, laboratory-free, quick, resource-independent and cost-effective nucleic acid detection, and provides a feasible alternative to complex equipments. The device shows potentials for point-of-care testing of SARS-CoV-2 and other respiratory diseases in remote or resource-limited areas with proper implementation.

Miniaturized electrophoresis: An integrated microfluidic cartridge with functionalized hydrogel-assisted LAMP for sample-to-answer analysis of nucleic acid

Accurate detection of pathogenic nucleic acids is crucial for early diagnosis, effective treatment, and containment of infectious diseases. It facilitates the timely identification of pathogens, aids in monitoring disease outbreaks, and helps prevent the spread of infections within healthcare settings and communities. We developed a multi-layered, paper-based microfluidic and miniaturized electrophoresis system for rapid nucleic acid extraction, separation, amplification, and detection, designed for resource-limited settings. Constructed from acrylic, transparency film, pressure-sensitive adhesion, and Whatman paper using a CO2 laser, the setup simplifies traditional methods and eliminates the need for complex equipment. DNA extraction and purification are achieved using Zweifach-Fung bifurcation and Fahraeus effect principles, with detection via a hydrogel-assisted colorimetric isothermal reverse transcriptase-loop-mediated isothermal amplification technique. The system accurately identified the SARS-CoV-2 N-gene and β-actin human gene, validated by a compact electrophoresis setup. In clinical validation with 12 patient specimens, the system demonstrated a positive predictive agreement of 83.0% and a negative predictive agreement of 100%. The system achieves a limit of detection of 1 copy/μl and can potentially transform nucleic acid detection assays in healthcare settings. This study addresses key challenges in nucleic acid detection, such as ensuring sample quality and quantity, reducing reliance on sophisticated equipment, preventing contamination, simplifying procedures, and providing rapid and accurate diagnostics for emerging pathogens.

Dried Blood Matrix as a New Material for the Detection of DNA Viruses

The gold standard for diagnosing viruses such as the Hepatitis B Virus has remained largely unchanged, relying on conventional methods involving extraction, purification, and polymerase chain reaction (PCR). This approach is hindered by limited availability, as it is time-consuming and requires highly trained personnel. Moreover, it suffers from low recovery rates of the nucleic acid molecules for samples with low copy numbers. To address the challenges of complex instrumentation and low recovery rate of DNA, a drying process coupled with thermal treatment of whole blood is employed, resulting in the creation of a dried blood matrix characterized by a porous structure with a high surface-to-volume ratio where it also inactivates the amplification inhibitors present in whole blood. Drawing on insights from Brunauer-Emmett-Teller (BET)- Barrett-Joyner-Halenda (BJH) analysis, scanning electron microscopy (SEM), and fluorescence recovery after photobleaching (FRAP), detection assay is devised for HBV, as a demonstration, from whole blood with high recovery of DNA and simplified instrumentation achieving a limit of detection (LOD) of 10 IU mL-1. This assay can be completed in <1.5 h using a simple heater, can be applied to other DNA viruses, and is expected to be suitable for point-of-care, especially in low-resource settings.

Point-of-Care Multiplex Detection of Respiratory Viruses

The COVID-19 pandemic, in addition to the co-occurrence of influenza virus and respiratory syncytial virus (RSV), has emphasized the requirement for efficient and reliable multiplex diagnostic methods for respiratory infections. While existing multiplex detection techniques are based on reverse transcription quantitative polymerase chain reaction (RT-qPCR) and extraction and purification kits, the need for complex instrumentation and elevated cost limit their scalability and availability. In this study, we have developed a point-of-care (POC) device based on reverse transcription loop-mediated isothermal amplification (RT-LAMP) that can simultaneously detect four respiratory viruses (SARS-CoV-2, Influenza A, Influenza B, and RSV) and perform two controls in less than 30 min, while avoiding the use of the RNA extraction kit. The system includes a disposable microfluidic cartridge with mechanical components that automate sample processing, with a low-cost and portable optical reader and a smartphone app to record and analyze fluorescent images. The application as a real point-of-care platform was validated using swabs spiked with virus particles in nasal fluid. Our portable diagnostic system accurately detects viral RNA specific to respiratory pathogens, enabling deconvolution of coinfection information. The detection limits for each virus were determined using virus particles spiked in chemical lysis buffer. Our POC device has the potential to be adapted for the detection of new pathogens and a wide range of viruses by modifying the primer sequences. This work highlights an alternative approach for multiple respiratory virus diagnostics that is well-suited for healthcare systems in resource-limited settings or at home.

A Low-Cost Handheld Centrifugal Microfluidic System for Multiplexed Visual Detection Based on Isothermal Amplification

A low-cost, handheld centrifugal microfluidic system for multiplexed visual detection based on recombinase polymerase amplification (RPA) was developed. A concise centrifugal microfluidic chip featuring four reaction units was developed to run multiplexed RPA amplification in parallel. Additionally, a significantly shrunk-size and cost-effective handheld companion device was developed, incorporating heating, optical, rotation, and sensing modules, to perform multiplexed amplification and visual detection. After one-time sample loading, the metered sample was equally distributed into four separate reactors with high-speed centrifugation. Non-contact heating was adopted for isothermal amplification. A tiny DC motor on top of the chip was used to drive steel beads inside reactors for active mixing. Another small DC motor, which was controlled by an elaborate locking strategy based on magnetic sensing, was adopted for centrifugation and positioning. Visual fluorescence detection was optimized from different sides, including material, surface properties, excitation light, and optical filters. With fluorescence intensity-based visual detection, the detection results could be directly observed through the eyes or with a smartphone. As a proof of concept, the handheld device could detect multiple targets, e.g., different genes of African swine fever virus (ASFV) with the comparable LOD (limit of detection) of 75 copies/test compared to the tube-based RPA.

Development of a Diagnostic Microfluidic Chip for SARS-CoV-2 Detection in Saliva and Nasopharyngeal Samples

The novel coronavirus SARS-CoV-2 was first isolated in late 2019; it has spread to all continents, infected over 700 million people, and caused over 7 million deaths worldwide to date. The high transmissibility of the virus and the emergence of novel strains with altered pathogenicity and potential resistance to therapeutics and vaccines are major challenges in the study and treatment of the virus. Ongoing screening efforts aim to identify new cases to monitor the spread of the virus and help determine the danger connected to the emergence of new variants. Given its sensitivity and specificity, nucleic acid amplification tests (NAATs) such as RT-qPCR are the gold standard for SARS-CoV-2 detection. However, due to high costs, complexity, and unavailability in low-resource and point-of-care (POC) settings, the available RT-qPCR assays cannot match global testing demands. An alternative NAAT, RT-LAMP-based SARS-CoV-2 detection offers scalable, low-cost, and rapid testing capabilities. We have developed an automated RT-LAMP-based microfluidic chip that combines the RNA isolation, purification, and amplification steps on the same device and enables the visual detection of SARS-CoV-2 within 40 min from saliva and nasopharyngeal samples. The entire assay is executed inside a uniquely designed, inexpensive disposable microfluidic chip, where assay components and reagents have been optimized to provide precise and qualitative results and can be effectively deployed in POC settings. Furthermore, this technology could be easily adapted for other novel emerging viruses.

Hand-held all-in-one (HAO) self-test kit for rapid and on-site detection of SARS-CoV-2 with colorimetric LAMP

Throughout the COVID-19 pandemic, individuals potentially infected with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) were forcibly recalled to local or central hospitals, where the diagnostic results were obtained a couple of days after the liquid biopsies were subjected to conventional polymerase chain reaction (PCR). This slow output of such a complex and time-consuming laboratory procedure hindered its widespread application. To overcome the limitations associated with such a centralized diagnostic system, we developed a hand-held and all-in-one type test kit in which the analytical results can be obtained in only 30 min. The test kit consists of three major steps for on-site SARS-CoV-2 RNA detection: 1) virus lysis by heat, 2) RNA enrichment by membrane, and 3) real-time detection by colorimetric loop-mediated isothermal amplification (c-LAMP). The proposed device operates in a sample-to-answer format, is fully automated, and reduces dependence on traditional laboratory settings, facilitating large-scale population screening.

A Blood Drying Process for DNA Amplification

The presence of numerous inhibitors in blood makes their use in nucleic acid amplification techniques difficult. Current methods for extracting and purifying pathogenic DNA from blood involve removal of inhibitors, resulting in low and inconsistent DNA recovery rates. To address this issue, a biphasic method is developed that simultaneously achieves inhibitor inactivation and DNA amplification without the need for a purification step. Inhibitors are physically trapped in the solid-phase dried blood matrix by blood drying, while amplification reagents can move into the solid nano-porous dried blood and initiate the amplification. It is demonstrated that the biphasic method has significant improvement in detection limits for bacteria such as Escherichia coli, Methicillin-resistant Staphylococcus aureus, Methicillin-Sensitive Staphylococcus aureus using loop-mediated isothermal amplification (LAMP) and recombinase polymerase amplification (RPA). Several factors, such as drying time, sample volume, and material properties are characterized to increase sensitivity and expand the application of the biphasic assay to blood diagnostics. With further automation, this biphasic technique has the potential to be used as a diagnostic platform for the detection of pathogens eliminating lengthy culture steps.

Multiplexed discrimination of SARS-CoV-2 variants via duplex-specific nuclease combined MALDI-TOF MS

The frequent mutations in SARS-CoV-2 significantly increase the virus's pathogenicity and transmissibility while also diminishing the effectiveness of vaccines. Consequently, assays capable of rapidly and simultaneously identifying multiple SARS-CoV-2 variants are essential for large-scale applications that aim to monitor the evolution of the virus. In this work, we propose a method combining duplex-specific nuclease (DSN)-assisted cyclic amplification with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) detection, enabling the simultaneous identification of multiple SARS-CoV-2 variants at high-throughput. Due to the high specificity of DSN, single-base mutations can be resolved by the method. With ultra-sensitive detection by MALDI-TOF MS, a limit of detection of 100 pM viral RNA fragment was demonstrated. The assay was used for simultaneous identification and typing of SARS-CoV-2 Alpha, Beta, and Delta variants. The whole assay can be accomplished within 3 h, and the amplification is performed under constant temperature, making the technique simple in operation and efficient. It is also feasible to extend the technique to the detection of many other variants of the virus. We expect that the method can add value to the rapid screening of viral variants and can play an important role in pandemic control.

Ultra-Fast Single-Nucleotide-Variation Detection Enabled by Argonaute-Mediated Transistor Platform

"Test-and-go" single-nucleotide variation (SNV) detection within several minutes remains challenging, especially in low-abundance samples, since existing methods face a trade-off between sensitivity and testing speed. Sensitive detection usually relies on complex and time-consuming nucleic acid amplification or sequencing. Here, a graphene field-effect transistor (GFET) platform mediated by Argonaute protein that enables rapid, sensitive, and specific SNV detection is developed. The Argonaute protein provides a nanoscale binding channel to preorganize the DNA probe, accelerating target binding and rapidly recognizing SNVs with single-nucleotide resolution in unamplified tumor-associated microRNA, circulating tumor DNA, virus RNA, and reverse transcribed cDNA when a mismatch occurs in the seed region. An integrated microchip simultaneously detects multiple SNVs in agreement with sequencing results within 5 min, achieving the fastest SNV detection in a "test-and-go" manner without the requirement of nucleic acid extraction, reverse transcription, and amplification.

Development of an integrated sample amplification control for salivary point-of-care pathogen testing

BACKGROUND

The COVID-19 pandemic has led to a rise in point-of-care (POC) and home-based tests, but concerns over usability, accuracy, and effectiveness have arisen. The incorporation of internal amplification controls (IACs), essential control for translational POC diagnostics, could mitigate false-negative and false-positive results due to sample matrix interference or inhibition. Although emerging POC nucleic acid amplification tests (NAATs) for detecting SARS-CoV-2 show impressive analytical sensitivity in the lab, the assessment of clinical accuracy with IACs is often overlooked. In some cases, the IACs were run spatially, complicating assay workflow. Therefore, the multiplex assay for pathogen and IAC is needed.

RESULTS

We developed a one-pot duplex reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for saliva samples, a non-invasive and simple collected specimen for POC NAATs. The ORF1ab gene of SARS-CoV-2 was used as a target and a human 18S ribosomal RNA in human saliva was employed as an IAC to ensure clinical reliability of the RT-LAMP assay. The optimized assay could detect SARS-CoV-2 viral particles down to 100 copies/μL of saliva within 30 min without RNA extraction. The duplex RT-LAMP for SARS-CoV-2 and IAC is successfully amplified in the same reaction without cross-reactivity. The valid results were easily visualized in triple-line lateral flow immunoassay, in which two lines (flow control and IAC lines) represent valid negative results and three lines (flow control, IAC, and test line) represent valid positive results. This duplex assay demonstrated a clinical sensitivity of 95%, specificity of 100%, and accuracy of 96% in 30 clinical saliva samples.

SIGNIFICANCE

IACs play a crucial role in ensuring user confidence with respect to the accuracy and reliability of at-home and POC molecular diagnostics. We demonstrated the multiplex capability of SARS-COV-2 and human18S ribosomal RNA RT-LAMP without complicating assay design. This generic platform can be extended in a similar manner to include human18S ribosomal RNA IACs into different clinical sample matrices.

On-chip screening of SARS-CoV-2 cDNA by LAMP-integrated rotational diffusometry

The unprecedented pandemic has raised the demand for prompt, precise, and large-scale virus detection techniques to control the transmission of contagious illnesses. In this study, a loop-mediated isothermal amplification (LAMP) based on-chip platform was developed to address this challenge using rotational diffusometry and functionalized Janus particles. A recombinant plasmid containing a cDNA sequence of the SARS-CoV-2 non-structural protein 2 (nsp2) gene was employed here as a proof-of-concept for COVID-19 detection. Specifically, designed primers and the functionalized Janus particles were simultaneously loaded on a microfluidic chip to perform the LAMP reaction on a hot plate. The optimal Janus particle concentrations for diffusometric analysis were thoroughly validated, and the performance of the on-chip LAMP reaction was assessed using thermal image analysis. Utilization of the highly sensitive rotational diffusometry achieved a limit of detection of 1 pg/μL in just 10 min with a sample volume of 20 μL. Our method delivered a tenfold higher sensitivity than the conventional method by utilizing only half of its usual required time. Overall, this study proposes a potential nucleic acid (NA) amplification device to aid the rapid diagnosis of various diseases by modifying the primers for different target genes.

Saliva Analysis Based on Microfluidics: Focusing the Wide Spectrum of Target Analyte

Saliva is one of the most critical human body fluids that can reflect the state of the human body. The detection of saliva is of great significance for disease diagnosis and health monitoring. Microfluidics, characterized by microscale size and high integration, is an ideal platform for the development of rapid and low-cost disease diagnostic techniques and devices. Microfluidic-based saliva testing methods have aroused considerable interest due to the increasing need for noninvasive testing and frequent or long-term testing. This review briefly described the significance of saliva analysis and generally classified the targets in saliva detection into pathogenic microorganisms, inorganic substances, and organic substances. By using this classification as a benchmark, the state-of-the-art research results on microfluidic detection of various substances in saliva were summarized. This work also put forward the challenges and future development directions of microfluidic detection methods for saliva.

A highly sensitive, real-time centrifugal microfluidic chip for multiplexed detection based on isothermal amplification

A real-time centrifugal microfluidic chip with a companion analyzer was developed for highly sensitive, multiplexed nucleic acid detection based on RPA (recombinase polymerase amplification) isothermal amplification. In order to improve the detection sensitivity, two different optimization strategies were systematically studied. Witnessing the high viscosity of RPA reagent, one way was to improve the amplification efficiency by intentionally introducing active mixing based on centrifugal actuation. While the other way was to improve the detection sensitivity by utilizing two-stage amplification. The templates were pre-amplified in the first-stage amplification chamber before they were aliquoted and distributed into a couple of second-stage ones for multiplexed detection. Different mixing methods relative to different actuation time were studied and compared. Similarly, different two-stage amplification modes relative to different time protocols were compared as well. Totally four different amplification modes including with or without mixing, and with or without two-stage amplification, were systematically analyzed and compared. It was found that, the detection sensitivity could be significantly improved by the two-stage amplification with active mixing. Furthermore, as a proof of concept, the performance of the developed microfluidic chip was demonstrated by successfully detecting different genes of African swine fever virus (ASFV) in parallel with high sensitivity.

Development of an Integrated Sample Amplification Control for Salivary Point-of-Care Pathogen Testing

Background

The COVID-19 pandemic has led to a rise in point-of-care (POC) and home-based tests, but concerns over usability, accuracy, and effectiveness have arisen. The incorporation of internal amplification controls (IACs), essential control for translational POC diagnostics, could mitigate false-negative and false-positive results due to sample matrix interference or inhibition. Although emerging POC nucleic acid amplification tests (NAATs) for detecting SARS-CoV-2 show impressive analytical sensitivity in the lab, the assessment of clinical accuracy with IACs is often overlooked. In some cases, the IACs were run spatially, complicating assay workflow. Therefore, the multiplex assay for pathogen and IAC is needed.

Results

We developed a one-pot duplex reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for saliva samples, a non-invasive and simple collected specimen for POC NAATs. The ORF1ab gene of SARS-CoV-2 was used as a target and a human 18S ribosomal RNA in human saliva was employed as an IAC to ensure clinical reliability of the RT-LAMP assay. The optimized assay could detect SARS-CoV-2 viral particles down to 100 copies/μL of saliva within 30 minutes without RNA extraction. The duplex RT-LAMP for SARS-CoV-2 and IAC is successfully amplified in the same reaction without cross-reactivity. The valid results were easily visualized in triple-line lateral flow immunoassay, in which two lines (flow control and IAC lines) represent valid negative results and three lines (flow control, IAC, and test line) represent valid positive results. This duplex assay demonstrated a clinical sensitivity of 95%, specificity of 100%, and accuracy of 96% in 30 clinical saliva samples.

Significance

IACs play a crucial role in ensuring user confidence with respect to the accuracy and reliability of at-home and POC molecular diagnostics. We demonstrated the multiplex capability of SARS-COV-2 and human18S ribosomal RNA RT-LAMP without complicating assay design. This generic platform can be extended in a similar manner to include human18S ribosomal RNA IACs into different clinical sample matrices.

A Novel COVID-19 Diagnostic System Using Biosensor Incorporated Artificial Intelligence Technique

COVID-19, continually developing and raising increasingly significant issues, has impacted human health and caused countless deaths. It is an infectious disease with a high incidence and mortality rate. The spread of the disease is also a significant threat to human health, especially in the developing world. This study suggests a method called shuffle shepherd optimization-based generalized deep convolutional fuzzy network (SSO-GDCFN) to diagnose the COVID-19 disease state, types, and recovered categories. The results show that the accuracy of the proposed method is as high as 99.99%; similarly, precision is 99.98%; sensitivity/recall is 100%; specificity is 95%; kappa is 0.965%; AUC is 0.88%; and MSE is less than 0.07% as well as 25 s. Moreover, the performance of the suggested method has been confirmed by comparison of the simulation results from the proposed approach with those from several traditional techniques. The experimental findings demonstrate strong performance and high accuracy for categorizing COVID-19 stages with minimal reclassifications over the conventional methods.

Mkit: A mobile nucleic acid assay based on a chitosan-modified minimalistic microfluidic chip (CM3-chip) and smartphone

Mobile sensing enabled by MS² technology, which integrates microfluidic and smartphone components, has seen many applications in recent years. In this direction, we developed an MS² platform (an integrated kit) for nucleic acid assay, which included a chitosan-modified minimalistic microfluidic chip (CM³-chip), a smartphone-based fluorescence detector (SF-detector), an APP for imaging and analysis, reagents, and accessories. Once the lysed sample was loaded into the CM³-chip modified by 1% concentration and 200-260 kDa molecular weight of chitosan, the following assay can be completed in approximately 1 h. The Mkit can detect 3 × 10° copies μL^-1 of plasmid DNA and its polymerase chain reaction (PCR) efficiency was 96.8%. The CM³-chip equipped for the Mkit can enrich nucleic acid from the pH = 5 of lysis buffer, instead of using conventional adsorption mediums such as the magnetic beads and silica gel membranes, which could result in unexpected impurity residuals and tedious cleaning operations. In addition, the performance of the Mkit equipped with the pristine chip was demonstrated to perform poorer than that coupled with the CM³-chip in which the enriched nucleic acid can be all used for "in-situ PCR". The universality, selectivity, and user-friendliness of the Mkit were also validated. We finally demonstrated the feasibility of the Mkit for testing artificially prepared infected samples. H5N6 and IAV-infected saliva samples provided the limits of detection of 5 × 10² copies mL^-1 and 3.24 × 10² copies mL^-1 per chamber, respectively. The streamlined assay and compact device should enable the great potential of the Mkit in research and potential diagnostic uses.

Microfluidic-based technologies for diagnosis, prevention, and treatment of COVID-19: recent advances and future directions

The COVID-19 pandemic has posed significant challenges to existing healthcare systems around the world. The urgent need for the development of diagnostic and therapeutic strategies for COVID-19 has boomed the demand for new technologies that can improve current healthcare approaches, moving towards more advanced, digitalized, personalized, and patient-oriented systems. Microfluidic-based technologies involve the miniaturization of large-scale devices and laboratory-based procedures, enabling complex chemical and biological operations that are conventionally performed at the macro-scale to be carried out on the microscale or less. The advantages microfluidic systems offer such as rapid, low-cost, accurate, and on-site solutions make these tools extremely useful and effective in the fight against COVID-19. In particular, microfluidic-assisted systems are of great interest in different COVID-19-related domains, varying from direct and indirect detection of COVID-19 infections to drug and vaccine discovery and their targeted delivery. Here, we review recent advances in the use of microfluidic platforms to diagnose, treat or prevent COVID-19. We start by summarizing recent microfluidic-based diagnostic solutions applicable to COVID-19. We then highlight the key roles microfluidics play in developing COVID-19 vaccines and testing how vaccine candidates perform, with a focus on RNA-delivery technologies and nano-carriers. Next, microfluidic-based efforts devoted to assessing the efficacy of potential COVID-19 drugs, either repurposed or new, and their targeted delivery to infected sites are summarized. We conclude by providing future perspectives and research directions that are critical to effectively prevent or respond to future pandemics.

Recent development of microfluidics-based platforms for respiratory virus detection

With the global outbreak of SARS-CoV-2, the inadequacies of current detection technology for respiratory viruses have been recognized. Rapid, portable, accurate, and sensitive assays are needed to expedite diagnosis and early intervention. Conventional methods for detection of respiratory viruses include cell culture-based assays, serological tests, nucleic acid detection (e.g., RT-PCR), and direct immunoassays. However, these traditional methods are often time-consuming, labor-intensive, and require laboratory facilities, which cannot meet the testing needs, especially during pandemics of respiratory diseases, such as COVID-19. Microfluidics-based techniques can overcome these demerits and provide simple, rapid, accurate, and cost-effective analysis of intact virus, viral antigen/antibody, and viral nucleic acids. This review aims to summarize the recent development of microfluidics-based techniques for detection of respiratory viruses. Recent advances in different types of microfluidic devices for respiratory virus diagnostics are highlighted, including paper-based microfluidics, continuous-flow microfluidics, and droplet-based microfluidics. Finally, the future development of microfluidic technologies for respiratory virus diagnostics is discussed.

Rapid Detection of SARS-CoV-2 Variants of Concern by Genomic Surveillance Techniques

This chapter describes the application of genomic, transcriptomic, proteomic, and metabolomic methods in the study of SARS-CoV-2 variants of concern. We also describe the important role of machine learning tools to identify the most significant biomarker signatures and discuss the latest point-of-care devices that can be used to translate these findings to the physician's office or to bedside care. The main emphasis is placed on increasing our diagnostic capacity and predictability of disease outcomes to guide the most appropriate treatment strategies.

Advances in RT-LAMP for COVID-19 testing and diagnosis

INTRODUCTION

The SARS-CoV-2 pandemic, and the subsequent limitations on standard diagnostics, has vastly expanded the user base of Reverse Transcription Loop-mediated isothermal Amplification (RT-LAMP) in fundamental research and development. RT-LAMP has also penetrated commercial markets, with emergency use authorizations for clinical diagnosis.

AREAS COVERED

This review discusses the role of RT-LAMP within the context of other technologies like RT-qPCR and rapid antigen tests, progress in sample preparation strategies to enable simplified workflow for RT-LAMP directly from clinical specimens, new challenges with primer and assay design for the evolving pandemic, prominent detection modalities including colorimetric and CRISPR-mediated methods, and translational research and commercial development of RT-LAMP for clinical applications.

EXPERT OPINION

RT-LAMP occupies a middle ground between RT-qPCR and rapid antigen tests. The simplicity approaches that of rapid antigen tests, making it suitable for point-of-care use, but the sensitivity nears that of RT-qPCR. RT-LAMP still lags RT-qPCR in fundamental understanding of the mechanism, and the interplay between sample preparation and assay performance. Industry is now beginning to address issues around scalability and usability, which could finally enable LAMP and RT-LAMP to find future widespread application as a diagnostic for other conditions, including other pathogens with pandemic potential.

A loop-mediated isothermal amplification-enabled analytical assay for the detection of SARS-CoV-2: A review

The number of words: 4645, the number of figures: 4, the number of tables: 1The outbreak of COVID-19 in December 2019 caused a global pandemic of acute respiratory disease, and with the increasing virulence of mutant strains and the number of confirmed cases, this has resulted in a tremendous threat to global public health. Therefore, an accurate diagnosis of COVID-19 is urgently needed for rapid control of SARS-CoV-2 transmission. As a new molecular biology technology, loop-mediated isothermal amplification (LAMP) has the advantages of convenient operation, speed, low cost and high sensitivity and specificity. In the past two years, rampant COVID-19 and the continuous variation in the virus strains have demanded higher requirements for the rapid detection of pathogens. Compared with conventional RT-PCR and real-time RT-PCR methods, genotyping RT-LAMP method and LAMP plus peptide nucleic acid (PNA) probe detection methods have been developed to correctly identified SARS-CoV-2 variants, which is also why LAMP technology has attracted much attention. LAMP detection technology combined with lateral flow assay, microfluidic technology and other sensing technologies can effectively enhance signals by nucleic acid amplification and help to give the resulting output in a faster, more convenient and user-friendly way. At present, LAMP plays an important role in the detection of SARS-CoV-2.

The Future of Point-of-Care Nucleic Acid Amplification Diagnostics after COVID-19: Time to Walk the Walk

Since the onset of the COVID-19 pandemic, over 610 million cases have been diagnosed and it has caused over 6.5 million deaths worldwide. The crisis has forced the scientific community to develop tools for disease control and management at a pace never seen before. The control of the pandemic heavily relies in the use of fast and accurate diagnostics, that allow testing at a large scale. The gold standard diagnosis of viral infections is the RT-qPCR. Although it provides consistent and reliable results, it is hampered by its limited throughput and technical requirements. Here, we discuss the main approaches to rapid and point-of-care diagnostics based on RT-qPCR and isothermal amplification diagnostics. We describe the main COVID-19 molecular diagnostic tests approved for self-testing at home or for point-of-care testing and compare the available options. We define the influence of specimen selection and processing, the clinical validation, result readout improvement strategies, the combination with CRISPR-based detection and the diagnostic challenge posed by SARS-CoV-2 variants for different isothermal amplification techniques, with a particular focus on LAMP and recombinase polymerase amplification (RPA). Finally, we try to shed light on the effect the improvement in molecular diagnostics during the COVID-19 pandemic could have in the future of other infectious diseases.

An Update on Detection Technologies for SARS-CoV-2 Variants of Concern

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) is responsible for the global epidemic of Coronavirus Disease 2019 (COVID-19), with a significant impact on the global economy and human safety. Reverse transcription-quantitative polymerase chain reaction (RT-PCR) is the gold standard for detecting SARS-CoV-2, but because the virus's genome is prone to mutations, the effectiveness of vaccines and the sensitivity of detection methods are declining. Variants of concern (VOCs) include Alpha, Beta, Gamma, Delta, and Omicron, which are able to evade recognition by host immune mechanisms leading to increased transmissibility, morbidity, and mortality of COVID-19. A range of research has been reported on detection techniques for VOCs, which is beneficial to prevent the rapid spread of the epidemic, improve the effectiveness of public health and social measures, and reduce the harm to human health and safety. However, a meaningful translation of this that reduces the burden of disease, and delivers a clear and cohesive message to guide daily clinical practice, remains preliminary. Herein, we summarize the capabilities of various nucleic acid and protein-based detection methods developed for VOCs in identifying and differentiating current VOCs and compare the advantages and disadvantages of each method, providing a basis for the rapid detection of VOCs strains and their future variants and the adoption of corresponding preventive and control measures.

Microfluidics-Based POCT for SARS-CoV-2 Diagnostics

A microfluidic chip is a tiny reactor that can confine and flow a specific amount of fluid into channels of tens to thousands of microns as needed and can precisely control fluid flow, pressure, temperature, etc. Point-of-care testing (POCT) requires small equipment, has short testing cycles, and controls the process, allowing single or multiple laboratory facilities to simultaneously analyze biological samples and diagnose infectious diseases. In general, rapid detection and stage assessment of viral epidemics are essential to overcome pandemic situations and diagnose promptly. Therefore, combining microfluidic devices with POCT improves detection efficiency and convenience for viral disease SARS-CoV-2. At the same time, the POCT of microfluidic chips increases user accessibility, improves accuracy and sensitivity, shortens detection time, etc., which are beneficial in detecting SARS-CoV-2. This review shares recent advances in POCT-based testing for COVID-19 and how it is better suited to help diagnose in response to the ongoing pandemic.