High-ammonia selective metal–organic framework–derived Co-doped Fe/Fe 2 O 3 catalysts for electrochemical nitrate reduction

2D copper-iron bimetallic metal-organic frameworks for reduction of nitrate with boosted efficiency and ammonia selectivity

Electrocatalytic reduction of nitrate to ammonia has been considered a promising and sustainable pathway for pollutant treatment and ammonia has significant potential as a clean energy. Therefore, the method has received much attention. In this work, Cu/Fe 2D bimetallic metal-organic frameworks were synthesized by a facile method applied as cathode materials without high-temperature carbonization. Bimetallic centers (Cu, Fe) with enhanced intrinsic activity demonstrated higher removal efficiency. Meanwhile, the 2D nanosheet reduced the mass transfer barrier between the catalyst and nitrate and increased the reaction kinetics. Therefore, the catalysts with a 2D structure showed much better removal efficiency than other structures (3D MOFs and Bulk MOFs). Under optimal conditions, Cu/Fe-2D MOF exhibited high nitrate removal efficiency (87.8%) and ammonium selectivity (89.3%) simultaneously. The ammonium yielded up to significantly 907.2 µg/(hr·mgcat) (7793.8 µg/(hr·mgmetal)) with Faradaic efficiency of 62.8% at an initial 100 mg N/L. The catalyst was proved to have good stability and was recycled 15 times with excellent effect. DFT simulations confirm the reduced Gibbs free energy of Cu/Fe-2D MOF. This study demonstrates the promising application of Cu/Fe-2D MOF in nitrate reduction to ammonia and provides new insights for the design of efficient electrode materials.

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Electrocatalytic nitrate reduction reaction presents a promising avenue for environmentally friendly ammonia (NH3) synthesis and wastewater treatment. An essential aspect to consider is the meticulous design of electrocatalysts. This study explores the utilization of a Ni-Co alloy nanosheet-decorated three-dimensional titanium dioxide (3D-TiO2) nanobelts electrodeposited on titanium meshes (NixCoy@TiO2/TM) for efficient electrocatalytic NH3 production. The optimized Ni1Co3@TiO2/TM electrode achieves a significant NH3 yield of 676.3 ± 27.1 umol h-1 cm-2 with an impressive Faradaic efficiency (FE) of 95.1 % ± 2.1 % in a 0.1 M KOH solution containing 0.1 M NO3- at -0.4 V versus the reversible hydrogen electrode. Additionally, the electrode demonstrates exceptional electrochemical activity for NH3 synthesis in simulated wastewater, delivering an outstanding NH3 yield of 751.6 ± 44.3 umol h-1 cm-2 with a FE of 96.8 % ± 0.4 % at the same potential of -0.4 V. Moreover, the electrode exhibits minimal variation in current density, NH3 yields and FEs throughout the 24-h stability test and the 20-cycle test, demonstrating its excellent stability and durability. This study offers a straightforward electrodeposited approach for the development of 3D-nanostructured alloys as catalysts for NH3 electrosynthesis from nitrates at room temperature.

Electrochemical Selective Nitrate Reduction: Pathways to Nitrogen and Ammonia Production

Nitrate (NO3 -) contamination from industrial, agricultural, and anthropogenic activities poses significant risks to human health and ecosystems. While traditional NO3 - remediation methods are effective, they often generate secondary pollutants and incur high costs. Electrochemical NO3 -reduction (ECNR) offers a sustainable alternative, converting NO3 - into environmentally benign nitrogen (N2) or valuable ammonia (NH3). This review explores recent advancements in selective ECNR pathways for NO3 --to-N2and NO3 --to-NH3 conversion, focusing on mechanistic insights, electrocatalyst development, and optimization strategies. Key factors influencing ECNR performance, such as electrode materials, electrolyte composition, and hydrogen evolution inhibition, are discussed. Additionally, the review highlights the role of single-atom, bimetallic, and nanostructured catalysts in enhancing faradaic efficiency, total N2 removal, and selectivity, with particular attention to Pd-Cu systems. Strategies to address challenges like low selectivity and catalyst degradation are also explored. This review underscores the potential of ECNR as a viable alternative to the energy-intensive Haber-Bosch process for NH3 production, aligning with global sustainability goals. Finally, we identify research gaps and propose future directions for improving the efficiency, stability, and scalability of ECNR technologies.

Phosphorization of α-Fe2O3 Boosts Active Hydrogen Mediated Electrochemical Nitrate Reduction to Ammonia

Inexpensive iron-based materials are considered promising electrocatalysts for nitrate (NO3 -) reduction, but their catalytic activity and spontaneous corrosion remain challenges. Here, the α-Fe2O3 active surface is reconstructed by gradient phosphorization to obtain FePx with higher electrochemical activity. FeP2.0 optimizes the adsorption energy of NO3 - and its reduction intermediates, meanwhile promote the generation of active hydrogen (*H) but inhibit its generation of H2. More importantly, Fe and P can serve as binding sites for NO3 - and *H, respectively, which improves the electron utilization of NO3 - deoxygenation and the efficiency of the subsequent hydrogenation for the selective synthesis of NH3. 91.7% NO3 - conversion rate is achieved for the reduction of 100 mL 200 mg L-1 NO3 --N, 99.3% ammonia (NH3 selectivity (yield of 1.79 mg h-1 cm-2), and 91.4% Faraday efficiency in 3 h. The high-purity solid NH4Cl is finally extracted by gas extraction and vacuum distillation (81.4% recovery). This study provides new insights and strategies for the conversion of NO3 - to NH3 products over iron-based electrocatalysts.

Amorphous Ni3B Promotes Electroreduction of Nitrate to Ammonia

The electrocatalytic nitrate reduction to ammonia (NRA) can address nitrogen cycle imbalance and high carbon emissions; however, the intense competition of hydrogen evolution reaction (HER) restricts the rate of NH3 production. Herein, amorphous Ni3B (a-Ni3B) is designed to balance the NRA and HER. The NH3 yield of a-Ni3B surpasses those of pure Ni and NiO, which is attributed to the preferential adsorption of NO3- on the B and Ni sites of a-Ni3B for the NRA reaction, greatly inhibiting the HER. Furthermore, the a-Ni3B possesses advantages in NRA performance compared to crystalline Ni3B (c-Ni3B) due to more active hydrogen (*H) generated during the catalytic process. The *H in the NRA process on a-Ni3B is verified by the electron spin resonance technique. The NRA mechanism is comprehensively discussed based on the results of in situ characterization and density functional theory calculations. The a-Ni3B can enhance NH3 production by inhibiting HER, which provides ideas for sustainable NH3 synthesis.

Enhancing Localized Electron Density over Pd1.4Cu Decorated Oxygen Defective TiO2-x Nanoarray for Electrocatalytic Nitrite Reduction to Ammonia

Electrocatalytic nitrite (NO2 -) reduction to ammonia (NH3) is a promising method for reducing pollution and aiding industrial production. However, progress is limited by the lack of efficient selective catalysts and ambiguous catalytic mechanisms. This study explores the loading of PdCu alloy onto oxygen defective TiO2-x, resulting in a significant increase in NH3 yield (from 70.6 to 366.4 µmol cm-2 h-1 at -0.6 V vs reversible hydrogen electrode) by modulating localized electron density. In situ and operando studies illustrate that the reduction of NO2 - to NH3 involves gradual deoxygenation and hydrogenation. The process also demonstrated excellent selectivity and stability, with long-term durability in cycling and 50 h stability tests. Density functional theory (DFT) calculations elucidate that the introduction of PdCu alloys further amplified electron density at oxygen vacancies (Ovs). Additionally, the Ti─O bond is strengthened as the d-band center of the Ti 3d rising after PdCu loading, facilitating the adsorption and activation of *NO2. Moreover, the presence of Ovs and PdCu alloy lowers the energy barriers for deoxygenation and hydrogenation, leading to high yield and selectivity of NH3. This insight of controlling localized electron density offers valuable insights for advancing sustainable NH3 synthesis methods.

Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia: Group VIII-Based Catalysts

The accumulation of nitrates in the environment causes serious health and environmental problems. The electrochemical nitrate reduction reaction (e-NO3RR) has received attention for its ability to convert nitrate to value-added ammonia with renewable energy. The key to effective catalytic efficiency is the choice of materials. Group VIII-based catalysts demonstrate great potential for application in e-NO3RR because of their high activity, low cost, and good electron transfer capability. This review summarizes the Group VIII catalysts, including monatomic, bimetallic, oxides, phosphides, and other composites. On this basis, strategies to enhance the intrinsic activity of the catalysts through coordination environment modulation, synergistic effects, defect engineering and hybridization are discussed. Meanwhile, the ammonia recovery process is summarized. Finally, the current research status in this field is prospected and summarized. This review aims to realize the large-scale application of nitrate electrocatalytic reduction in industrial wastewater.

Fe2O3/ZnO heterojunction for efficient electrochemical nitrate reduction to ammonia

Electrochemical nitrate reduction to ammonia (ENO3RR) has attracted great attention owing to its characteristics of treating wastewater while producing high value-added ammonia. In this study, we successfully prepared a heterojunction electrocatalyst Fe2O3/ZnO consisting of Fe2O3 nanosheets and ZnO nanoparticles, where the construction of the Fe2O3/ZnO heterojunction not only increased the exposure of the active sites of the catalyst, accelerated the interfacial electron transfer, and improved the conductivity of the catalyst but also optimized its overall electronic structure. Thus, Fe2O3/ZnO demonstrated a high Faraday efficiency of 97.4% and an ammonia yield of 6327.2 μg h-1 cm-2 at -1.0 V (vs. RHE) in 0.1 M KNO3 and 0.1 M PBS. DFT calculations also confirmed that the constructed Fe2O3/ZnO heterojunction effectively decreased the reaction energy barrier of *NO → *NHO and accelerated the reaction kinetics, which is favourable for ENO3RR. This study provides a new and facile design strategy of catalysts for electrochemical nitrate reduction to ammonia.

Metal-Organic Frameworks Derived Carbon-Supported Metal Electrocatalysts for Energy-Related Reduction Reactions

Electrochemical reduction reactions, as cathodic processes in many energy-related devices, significantly impact the overall efficiency determined mainly by the performance of electrocatalysts. Metal-organic frameworks (MOFs) derived carbon-supported metal materials have become one of star electrocatalysts due to their tunable structure and composition through ligand design and metal screening. However, for different electroreduction reactions, the required active metal species vary in phase component, electronic state, and catalytic center configuration, hence requiring effective customization. From this perspective, this review comprehensively analyzes the structural design principles, metal loading strategies, practical electroreduction performance, and complex catalytic mechanisms, thereby providing insights and guidance for the future rational design of such electroreduction catalysts.

Efficient Electroreduction of Low Nitrate Concentration via Nitrate Self-Enrichment and Active Hydrogen Inducement on the Ce(IV)-Co3O4 Cathode

Low concentrations of nitrate (NO3-) widely exist in wastewater, post-treated wastewater, and natural environments; its further disposal is a challenge but meaningful for its discharge goals. Electroreduction of NO3- is a promising method that allows to eliminate NO3- and even generate higher-value NH3. However, the massive side reaction of hydrogen evolution has raised great obstacles in the electroreduction of low concentrations of NO3-. Herein, we present an efficient electroreduction method for low or even ultralow concentrations of NO3- via NO3- self-enrichment and active hydrogen (H*) inducement on the Ce(IV)-Co3O4 cathode. The key mechanism is that the strong oxytropism of Ce(IV) in Co3O4 resulted in two changes in structures, including loose nanoporous structures with copious dual adsorption sites of Ce-Co showing strong self-enrichment of NO3- and abundant oxygen vacancies (Ovs) inducing substantial H*. Ultimately, the bifunctional role synergistically promoted the selective conversion of NH3 rather than H2. As a result, Ce(IV)-Co3O4 demonstrated a NO3- self-enrichment with a 4.3-fold up-adsorption, a 7.5-fold enhancement of NH3 Faradic efficiency, and a 93.1% diminution of energy consumption when compared to Co3O4, substantially exceeding other reported electroreduction cathodes for NO3- concentrations lower than 100 mg·L-1. This work provides an effective treatment method for low or even ultralow concentrations of NO3-.

Facet-Dependent Evolution of Active Components on Spinel Co3O4 for Electrochemical Ammonia Synthesis

Spinel cobalt oxides (Co3O4) have emerged as a promising class of catalysts for the electrochemical nitrate reduction reaction (eNO3RR) to ammonia, offering advantages such as low cost, high activity, and selectivity. However, the specific role of crystallographic facets in determining the catalysts' performance remains elusive, impeding the development of efficient catalysts. In this study, we have synthesized various Co3O4 nanostructures with exposed facets of {100}, {111}, {110}, and {112}, aiming to investigate the dependence of the eNO3RR activity on the crystallographic facets. Among the catalysts tested, Co3O4 {111} shows the best performance, achieving an ammonia Faradaic efficiency of 99.1 ± 1.8% with a yield rate of 35.2 ± 0.6 mg h-1 cm-2 at -0.6 V vs RHE. Experimental and theoretical results reveal a transformation process in which the active phases evolve from Co3O4 to Co3O4-x with oxygen vacancy (Ov), followed by a Co3O4-x-Ov/Co(OH)2 hybrid, and finally Co(OH)2. This process is observed for all facets, but the formation of Ov and Co(OH)2 is the most rapid on the (111) surface. The presence of Ov significantly reduces the free energy of the *NH2 intermediate formation from 1.81 to -0.53 eV, and plentiful active sites on the densely reconstructed Co(OH)2 make Co3O4 {111} an ideal catalyst for ammonia synthesis via eNO3RR. This work provides insights into the understanding of the realistic active components, offers a strategy for developing highly efficient Co-based spinel catalysts for ammonia synthesis through tuning the exposed facets, and helps further advance the design and optimization of catalysts in the field of eNO3RR.

Removal of Cr(VI) by glutaraldehyde-crosslinked chitosan encapsulating microscale zero-valent iron: Synthesis, mechanism, and longevity

Microscale zero-valent iron (mZVI) has shown great potential for groundwater Cr(VI) remediation. However, low Cr(VI) removal capacity caused by passivation restricted the wide use of mZVI. We prepared mZVI/GCS by encapsulating mZVI in a porous glutaraldehyde-crosslinked chitosan matrix, and the formation of the passivation layer was alleviated by reducing the contact between zero-valent iron particles. The average pore diameter of mZVI/GCS was 8.775 nm, which confirmed the mesoporous characteristic of this material. Results of batch experiments demonstrated that mZVI/GCS exhibited high Cr(VI) removal efficiency in a wide range of pH (2-10) and temperature (5-35°C). Common groundwater coexisting ions slightly affected mZVI/GCS. The material showed great reusability, and the average Cr(VI) removal efficiency was 90.41% during eight cycles. In this study, we also conducted kinetics and isotherms analysis. Pseudo-second-order model was the most matched kinetics model. The Cr(VI) adsorption process was fitted by both Langmuir and Freundlich isotherms models, and the maximum Langmuir adsorption capacity of mZVI/GCS reached 243.63 mg/g, which is higher than the adsorption capacities of materials reported in most of the previous studies. Notably, the column capacity for Cr(VI) removal of a mZVI/GCS-packed column was 6.4 times higher than that of a mZVI-packed column in a 50-day experiment. Therefore, mZVI/GCS with a porous structure effectively relieved passivation problems of mZVI and showed practical application prospects as groundwater Cr(VI) remediation material with practical application prospects.

Cu1-Fe Dual Sites for Superior Neutral Ammonia Electrosynthesis from Nitrate

The electrochemical nitrate reduction reaction (NO3RR) is able to convert nitrate (NO3 -) into reusable ammonia (NH3), offering a green treatment and resource utilization strategy of nitrate wastewater and ammonia synthesis. The conversion of NO3 - to NH3 undergoes water dissociation to generate active hydrogen atoms and nitrogen-containing intermediates hydrogenation tandemly. The two relay processes compete for the same active sites, especially under pH-neutral condition, resulting in the suboptimal efficiency and selectivity in the electrosynthesis of NH3 from NO3 -. Herein, we constructed a Cu1-Fe dual-site catalyst by anchoring Cu single atoms on amorphous iron oxide shell of nanoscale zero-valent iron (nZVI) for the electrochemical NO3RR, achieving an impressive NO3 - removal efficiency of 94.8 % and NH3 selectivity of 99.2 % under neutral pH and nitrate concentration of 50 mg L-1 NO3 --N conditions, greatly surpassing the performance of nZVI counterpart. This superior performance can be attributed to the synergistic effect of enhanced NO3 - adsorption on Fe sites and strengthened water activation on single-atom Cu sites, decreasing the energy barrier for the rate-determining step of *NO-to-*NOH. This work develops a novel strategy of fabricating dual-site catalysts to enhance the electrosynthesis of NH3 from NO3 -, and presents an environmentally sustainable approach for neutral nitrate wastewater treatment.

Screening of Intermetallic Compounds Based on Intermediate Adsorption Equilibrium for Electrocatalytic Nitrate Reduction to Ammonia

Electrocatalytic nitrate (NO3-) reduction reaction (NO3RR) holds great potential for the conversion of NO3- contaminants into valuable NH3 in a sustainable method. Unfortunately, the nonequilibrium adsorption of intermediates and sluggish multielectron transfer have detrimental impacts on the electrocatalytic performance of the NO3RR, posing obstacles to its practical application. Herein, we initially screen the adsorption energies of three key intermediates, i.e., *NO3, *NO, and *H2O, along with the d-band centers on 21 types of transition metal (IIIV and IB)-Sb/Bi-based intermetallic compounds (IMCs) as electrocatalysts. The results reveal that hexagonal CoSb IMCs possess the optimal adsorption equilibrium for key intermediates and exhibit outstanding electrocatalytic NO3RR performance with a Faradaic efficiency of 96.3%, a NH3 selectivity of 89.1%, and excellent stability, surpassing the majority of recently reported NO3RR electrocatalysts. Moreover, the integration of CoSb IMCs/C into a novel Zn-NO3- battery results in a high power density of 11.88 mW cm-2.

Membraneless Electrochemical Synthesis Strategy toward Nitrate-to-Ammonia Conversion

Electroreduction of nitrate (NO3RR) to ammonia in membraneless electrolyzers is of great significance for reducing the cost and saving energy consumption. However, severe chemical crossover with side reactions makes it challenging to achieve ideal electrolysis. Herein, we propose a general strategy for efficient membraneless ammonia synthesis by screening NO3RR catalysts with inferior oxygen reduction activity and matching the counter electrode (CE) with good oxygen evolution activity while blocking anodic ammonia oxidation. Consequently, screening the available Co-Co system, the membraneless NO3--to-NH3 conversion performance was significantly higher than H-type cells using costly proton-exchange membranes. At 200 mA cm-2, the full-cell voltage of the membraneless system (∼2.5 V) is 4 V lower than that of the membrane system (∼6.5 V), and the savings are 61.4 kW h (or 56.9%) per 1 kg NH3 produced. A well-designed pulse process, inducing reversible surface reconstruction that in situ generates and restores the active Co(III) species at the working electrode and forms favorable Co3O4/CoOOH at the CE, further significantly improves NO3--to-NH3 conversion and blocks side reactions. A maximum NH3 yield rate of 1500.9 μmol cm-2 h-1 was achieved at -0.9 V (Faraday efficiency 92.6%). This pulse-coupled membraneless strategy provides new insights into design complex electrochemical synthesis.

The spin polarization strategy regulates heterogeneous catalytic activity performance: from fundamentals to applications

In recent years, there has been significant attention towards the development of catalysts that exhibit superior performance and environmentally friendly attributes. This surge in interest is driven by the growing demands for energy utilization and storage as well as environmental preservation. Spin polarization plays a crucial role in catalyst design, comprehension of catalytic mechanisms, and reaction control, offering novel insights for the design of highly efficient catalysts. However, there are still some significant research gaps in the current study of spin catalysis. Therefore, it is urgent to understand how spin polarization impacts catalytic reactions to develop superior performance catalysts. Herein, we present a comprehensive summary of the application of spin polarization in catalysis. Firstly, we summarize the fundamental mechanism of spin polarization in catalytic reactions from two aspects of kinetics and thermodynamics. Additionally, we review the regulation mechanism of spin polarization in various catalytic applications and several approaches to modulate spin polarization. Moreover, we discuss the future development of spin polarization in catalysis and propose several potential avenues for further progress. We aim to improve current catalytic systems through implementing a novel and distinctive spin engineering strategy.

Enzymatic Mesoporous Metal Nanocavities for Concurrent Electrocatalysis of Nitrate to Ammonia Coupled with Polyethylene Terephthalate Upcycling

Electrochemical upcycling of waste pollutants into high value-added fuels and/or chemicals is recognized as a green and sustainable solution that can address the resource utilization on earth. Despite great efforts, their progress has seriously been hindered by the lack of high-performance electrocatalysts. In this work, bimetallic PdCu mesoporous nanocavities (MCs) are reported as a new bifunctional enzymatic electrocatalyst that realizes concurrent electrocatalytic upcycling of nitrate wastewater and polyethylene terephthalate (PET) plastic waste. Abundant metal mesopores and open nanocavities of PdCu MCs provide the enzymatic confinement of key intermediates for the deeper electroreduction of nitrate and accelerate the transport of reactants/products within/out of electrocatalyst, thus affording high ammonia Faradic efficiency (FENH3) of 96.6% and yield rate of 5.6 mg h-1 mg-1 at the cathode. Meanwhile, PdCu MC nanozymes trigger the selective electrooxidation of PET-derived ethylene glycol (EG) into glycolic acid (GA) and formic acid with high FEs of >90% by a facile regulation of potentials at the anode. Moreover, concurrent electrosynthesis of value-added NH3 and GA is disclosed in the two-electrode coupling system, further confirming the high efficiency of bifunctional PdCu MC nanozymes in producing value-added fuels and chemicals from waste pollutants in a sustainable manner.

Three-Dimensional Porous Cu/Cu2+1O Nanosheet Arrays Promote Electrochemical Nitrate-to-Ammonia Conversion

The efficiency of electrochemical nitrate (NO3-) reduction to ammonia (NH3) still remains a challenge due to the sluggish kinetics of the complex eight-electron reduction process and competitive hydrogen evolution reaction (HER). Herein, we designed new three-dimensional (3D) porous Cu/Cu2+1O nanosheet arrays (Cu/Cu2+1O NSA) by coupling a template-directed method with in situ electroreduction. Thanks to the 3D porous structure and in-plane heterojunctions, Cu/Cu2+1O NSA can provide abundant active sites and a good interfacial effect, obtaining the maximum Faradaic efficiency (FE) of ammonia (88.09%) and high yield rate of 0.2634 mmol h-1 cm-2, which is higher than that of CuO nanosheets (77.81% and 0.2188 mmol h-1 cm-2) and CuO nanoparticles (34.60% and 0.0692 mmol h-1 cm-2). Experimental results and DFT simulations show that the interface effect of Cu/Cu2+1O can decrease the reaction energy barrier of the key step (*NO to *NOH) and can greatly inhibit the competitive hydrogen evolution reaction, thereby achieving excellent electrocatalytic performance for nitrate-to-ammonia conversion.

Metal Doped Unconventional Phase IrNi Nanobranches: Tunable Electrochemical Nitrate Reduction Performance and Pollutants Upcycling

Electrochemical nitrate reduction (NO3RR) provides a new option to abate nitrate contamination with a low carbon footprint. Restricted by competitive hydrogen evolution, achieving satisfied nitrate reduction performance in neutral media is still a challenge, especially for the regulation of this multielectron multiproton reaction. Herein, facile element doping is adopted to tune the catalytic behavior of IrNi alloy nanobranches with an unconventional hexagonal close-packed (hcp) phase toward NO3RR. In particular, the obtained hcp IrNiCu nanobranches favor the ammonia production and suppress byproduct formation in a neutral electrolyte indicated by in situ differential electrochemical mass spectrometry, with a high Faradaic efficiency (FE) of 85.6% and a large yield rate of 1253 μg cm-2 h-1 at -0.4 and -0.6 V (vs reversible hydrogen electrode (RHE)), respectively. In contrast, the resultant hcp IrNiCo nanobranches promote the formation of nitrite, with a peak FE of 33.1% at -0.1 V (vs RHE). Furthermore, a hybrid electrolysis cell consisting of NO3RR and formaldehyde oxidation is constructed, which are both catalyzed by hcp IrNiCu nanobranches. This electrolyzer exhibits lower overpotential and holds the potential to treat polluted air and wastewater simultaneously, shedding light on green chemical production based on contaminate degradation.

The interplay of hematite and photic biofilm triggers the acceleration of biotic nitrate removal

The soil-water interface is replete with photic biofilm and iron minerals; however, the potential of how iron minerals promote biotic nitrate removal is still unknown. This study investigates the physiological and ecological responses of photic biofilm to hematite (Fe2O3), in order to explore a practically feasible approach for in-situ nitrate removal. The nitrate removal by photic biofilm was significantly higher in the presence of Fe2O3 (92.5%) compared to the control (82.8%). Results show that the presence of Fe2O3 changed the microbial community composition of the photic biofilm, facilitates the thriving of Magnetospirillum and Pseudomonas, and promotes the growth of photic biofilm represented by the extracellular polymeric substance (EPS) and the content of chlorophyll. The presence of Fe2O3 also induces oxidative stress (•O2-) in the photic biofilm, which was demonstrated by electron spin resonance spectrometry. However, the photic biofilm could improve the EPS productivity to prevent the entrance of Fe2O3 to cells in the biofilm matrix and mitigate oxidative stress. The Fe2O3 then promoted the relative abundance of Magnetospirillum and Pseudomonas and the activity of nitrate reductase, which accelerates nitrate reduction by the photic biofilm. This study provides an insight into the interaction between iron minerals and photic biofilm and demonstrates the possibility of combining biotic and abiotic methods to improve the in-situ nitrate removal rate.

Amorphous Bismuth-Tin Oxide Nanosheets with Optimized C-N Coupling for Efficient Urea Synthesis

Closing the carbon and nitrogen cycles by electrochemical methods using renewable energy to convert abundant or harmful feedstocks into high-value C- or N-containing chemicals has the potential to transform the global energy landscape. However, efficient conversion avenues have to date been mostly realized for the independent reduction of CO2 or NO3-. The synthesis of more complex C-N compounds still suffers from low conversion efficiency due to the inability to find effective catalysts. To this end, here we present amorphous bismuth-tin oxide nanosheets, which effectively reduce the energy barrier of the catalytic reaction, facilitating efficient and highly selective urea production. With enhanced CO2 adsorption and activation on the catalyst, a C-N coupling pathway based on *CO2 rather than traditional *CO is realized. The optimized orbital symmetry of the C- (*CO2) and N-containing (*NO2) intermediates promotes a significant increase in the Faraday efficiency of urea production to an outstanding value of 78.36% at -0.4 V vs RHE. In parallel, the nitrogen and carbon selectivity for urea formation is also enhanced to 90.41% and 95.39%, respectively. The present results and insights provide a valuable reference for the further development of new catalysts for efficient synthesis of high-value C-N compounds from CO2.

Defect engineering on electrocatalysts for sustainable nitrate reduction to ammonia: Fundamentals and regulations

Electrocatalytic nitrate (NO3 -) reduction to ammonia (NH3) is a "two birds-one stone" method that targets remediation of NO3 --containing sewage and production of valuable NH3. The exploitation of advanced catalysts with high activity, selectivity, and durability is a key issue for the efficient catalytic performance. Among various strategies for catalyst design, defect engineering has gained increasing attention due to its ability to modulate the electronic properties of electrocatalysts and optimize the adsorption energy of reactive species, thereby enhancing the catalytic performance. Despite previous progress, there remains a lack of mechanistic insights into the regulation of catalyst defects for NO3 - reduction. Herein, this review presents insightful understanding of defect engineering for NO3 - reduction, covering its background, definition, classification, construction, and underlying mechanisms. Moreover, the relationships between regulation of catalyst defects and their catalytic activities are illustrated by investigating the properties of electrocatalysts through the analysis of electronic band structure, charge density distribution, and controllable adsorption energy. Furthermore, challenges and perspectives for future development of defects in NO3RR are also discussed, which can help researchers to better understand the defect engineering in catalysts, and also inspire scientists entering into this promising field.

Electrochemical Nitrate Reduction: Ammonia Synthesis and the Beyond

Natural nitrogen cycle has been severely disrupted by anthropogenic activities. The overuse of N-containing fertilizers induces the increase of nitrate level in surface and ground waters, and substantial emission of nitrogen oxides causes heavy air pollution. Nitrogen gas, as the main component of air, has been used for mass ammonia production for over a century, providing enough nutrition for agriculture to support world population increase. In the last decade, researchers have made great efforts to develop ammonia processes under ambient conditions to combat the intensive energy consumption and high carbon emission associated with the Haber-Bosch process. Among different techniques, electrochemical nitrate reduction reaction (NO3RR) can achieve nitrate removal and ammonia generation simultaneously using renewable electricity as the power, and there is an exponential growth of studies in this research direction. Here, a timely and comprehensive review on the important progresses of electrochemical NO3RR, covering the rational design of electrocatalysts, emerging CN coupling reactions, and advanced energy conversion and storage systems is provided. Moreover, future perspectives are proposed to accelerate the industrialized NH3 production and green synthesis of chemicals, leading to a sustainable nitrogen cycle via prosperous N-based electrochemistry.

Crystal Phase Engineering of Ultrathin Alloy Nanostructures for Highly Efficient Electroreduction of Nitrate to Ammonia

Electrocatalytic nitrate reduction reaction (NO3RR) toward ammonia synthesis is recognized as a sustainable strategy to balance the global nitrogen cycle. However, it still remains a great challenge to achieve highly efficient ammonia production due to the complex proton-coupled electron transfer process in NO3RR. Here, the controlled synthesis of RuMo alloy nanoflowers (NFs) with unconventional face-centered cubic (fcc) phase and hexagonal close-packed/fcc heterophase for highly efficient NO3RR is reported. Significantly, fcc RuMo NFs demonstrate high Faradaic efficiency of 95.2% and a large yield rate of 32.7 mg h-1 mgcat -1 toward ammonia production at 0 and -0.1 V (vs reversible hydrogen electrode), respectively. In situ characterizations and theoretical calculations have unraveled that fcc RuMo NFs possess the highest d-band center with superior electroactivity, which originates from the strong Ru─Mo interactions and the high intrinsic activity of the unconventional fcc phase. The optimal electronic structures of fcc RuMo NFs supply strong adsorption of key intermediates with suppression of the competitive hydrogen evolution, which further determines the remarkable NO3RR performance. The successful demonstration of high-performance zinc-nitrate batteries with fcc RuMo NFs suggests their substantial application potential in electrochemical energy supply systems.

Unveiling Cutting-Edge Developments in Electrocatalytic Nitrate-to-Ammonia Conversion

The excessive enrichment of nitrate in the environment can be converted into ammonia (NH3) through electrochemical processes, offering significant implications for modern agriculture and the potential to reduce the burden of the Haber-Bosch (HB) process while achieving environmentally friendly NH3 production. Emerging research on electrocatalytic nitrate reduction (eNitRR) to NH3 has gained considerable momentum in recent years for efficient NH3 synthesis. However, existing reviews on nitrate reduction have primarily focused on limited aspects, often lacking a comprehensive summary of catalysts, reaction systems, reaction mechanisms, and detection methods employed in nitrate reduction. This review aims to provide a timely and comprehensive analysis of the eNitRR field by integrating existing research progress and identifying current challenges. This review offers a comprehensive overview of the research progress achieved using various materials in electrochemical nitrate reduction, elucidates the underlying theoretical mechanism behind eNitRR, and discusses effective strategies based on numerous case studies to enhance the electrochemical reduction from NO3 - to NH3. Finally, this review discusses challenges and development prospects in the eNitRR field with an aim to guide design and development of large-scale sustainable nitrate reduction electrocatalysts.

Selective Reduction of Aqueous Nitrate to Ammonium with an Electropolymerized Chromium Molecular Catalyst

Nitrate (NO3-) is a common nitrogen-containing contaminant in agricultural, industrial, and low-level nuclear wastewater that causes significant environmental damage. In this work, we report a bioinspired Cr-based molecular catalyst incorporated into a redox polymer that selectively and efficiently reduces aqueous NO3- to ammonium (NH4+), a desirable value-added fertilizer component and industrial precursor, at rates of ∼0.36 mmol NH4+ mgcat-1 h-1 with >90% Faradaic efficiency for NH4+. The NO3- reduction reaction occurs through a cascade catalysis mechanism involving the stepwise reduction of NO3- to NH4+ via observed NO2- and NH2OH intermediates. To our knowledge, this is one of the first examples of a molecular catalyst, homogeneous or heterogenized, that is reported to reduce aqueous NO3- to NH4+ with rates and Faradaic efficiencies comparable to those of state-of-the-art solid-state electrocatalysts. This work highlights a promising and previously unexplored area of electrocatalyst research using polymer-catalyst composites containing complexes with oxophilic transition metal active sites for electrochemical nitrate remediation with nutrient recovery.

Ammonia Synthesis via Electrocatalytic Nitrate Reduction Using NiCoO2 Nanoarrays on a Copper Foam

Ammonia (NH3) plays a vital role in industrial and agricultural development. The electrocatalytic nitrate reduction reaction (eNO3RR) is an effective method to produce NH3 under environmental conditions but also requires considerably active and selective electrocatalysts. Herein, a copper foam was used as a conductive substrate for the electrode materials. Specifically, a Co metal-organic framework (Co-MOF) was in situ grown on the copper foam, etched, and calcined to form NiCoO2@Cu nanosheets, which were used as cathode electrodes for the eNO3RR. In 0.1 M Na2SO4 with 0.1 M NaNO3 electrolyte, NiCoO2@Cu nanosheets realized an NH3 yield of 5940.73 μg h-1 cm-2 at -0.9 V vs reversible hydrogen electrode (RHE), with a Faradaic efficiency of 94.2% at -0.7 V vs RHE. After 33 h of the catalytic reaction, the selectivity of NH3-N increased to 99.7%. The excellent electrocatalytic performance of NiCoO2@Cu nanosheets was attributed to the apparent synergistic effect between the Ni atoms and the Co atoms of bimetallic materials. This study shows that the Ni doping of NiCoO2@Cu nanosheets effectively facilitated the adsorption of NO3- on NiCoO2@Cu, and it promoted the eNO3RR.

Engineering the Co(II)/Co(III) Redox Cycle and Coδ+ Species Shuttle for Nitrate-to-Ammonia Conversion

Electroreduction of waste nitrate to valuable ammonia offers a green solution for environmental restoration and energy storage. However, the electrochemical self-reconstruction of catalysts remains a huge challenge in terms of maintaining their stability, achieving the desired active sites, and managing metal leaching. Herein, we present an electrical pulse-driven Co surface reconstruction-coupled Coδ+ shuttle strategy for the precise in situ regulation of the Co(II)/Co(III) redox cycle on the Co-based working electrode and guiding the dissolution and redeposition of Co-based particles on the counter electrode. As result, the ammonia synthesis performance and stability are significantly promoted while cathodic hydrogen evolution and anodic ammonia oxidation in a membrane-free configuration are effectively blocked. A high rate of ammonia production of 1.4 ± 0.03 mmol cm-2 h-1 is achieved at -0.8 V in a pulsed system, and the corresponding nitrate-to-ammonia Faraday efficiency is 91.7 ± 1.0%. This work holds promise for the regulation of catalyst reactivity and selectivity by engineering in situ controllable structural and chemical transformations.

Electrochemical Nitrate Reduction Catalyzed by Two-Dimensional Transition Metal Borides

We investigated 2D transition metal borides (MBenes) for the efficient conversion of nitrate to ammonia. MBenes have been previously shown to bind oxygen with extraordinary strength, which should translate toward selective adsorption of nitrate in aqueous media. Using Density Functional Theory, we screened MBenes by computing their nitrate and water adsorption energies, seeking materials with strong nitrate binding and weak water binding. We identified MnB, CrB, and VB as the best materials for selective nitrate adsorption and proceeded by computing their free energies for generating ammonia. Of the three candidates, CrB requires the lowest overpotential, making it the best candidate. To further decrease the overpotential, we doped the CrB MBene with secondary transition metals and found the addition of Mn to the active site further reduced the overpotential. We then computed the reaction mechanism grand canonically to observe the effect of applied potential on the free energy landscape.

A lignin-derived N-doped carbon-supported iron-based nanocomposite as high-efficiency oxygen reduction reaction electrocatalyst

Fuel cells are a promising renewable energy technology that depend heavily on noble metal Pt-based catalysts, particularly for the oxygen reduction reaction (ORR). The discovery of new, efficient non-precious metal ORR catalysts is critical for the continued development of cost-effective, high-performance fuel cells. The synthesized carbon material showed excellent electrocatalytic activity for the ORR, with half-wave potential (E1/2) and limiting current density (JL) of 0.88 V and 5.10 mA·cm-2 in alkaline electrolyte, respectively. The material has a Tafel slope of (65 mV dec-1), which is close to commercial Pt/C catalysts (60 mV dec-1). Moreover, the prepared materials exhibited excellent performance when assembled as cathodes for zinc-air batteries. The power density reached 110.02 mW cm-2 and the theoretical specific capacity was 801.21 mAh g-1, which was higher than that of the Pt/C catalyst (751.19 mAh g-1). In this study, with the assistance of Mg5(CO3)4(OH)2·4H2O, we introduce an innovative approach to synthesize advanced carbon materials, achieving precise control over the material's structure and properties. This research bridges a crucial gap in material science, with potential applications in renewable energy technologies, particularly in enhancing catalysts for fuel cells.

Spin polarized Fe1-Ti pairs for highly efficient electroreduction nitrate to ammonia

Electrochemical nitrate reduction to ammonia offers an attractive solution to environmental sustainability and clean energy production but suffers from the sluggish *NO hydrogenation with the spin-state transitions. Herein, we report that the manipulation of oxygen vacancies can contrive spin-polarized Fe1-Ti pairs on monolithic titanium electrode that exhibits an attractive NH3 yield rate of 272,000 μg h-1 mgFe-1 and a high NH3 Faradic efficiency of 95.2% at -0.4 V vs. RHE, far superior to the counterpart with spin-depressed Fe1-Ti pairs (51000 μg h-1 mgFe-1) and the mostly reported electrocatalysts. The unpaired spin electrons of Fe and Ti atoms can effectively interact with the key intermediates, facilitating the *NO hydrogenation. Coupling a flow-through electrolyzer with a membrane-based NH3 recovery unit, the simultaneous nitrate reduction and NH3 recovery was realized. This work offers a pioneering strategy for manipulating spin polarization of electrocatalysts within pair sites for nitrate wastewater treatment.

A Bi-Co Corridor Construction Effectively Improving the Selectivity of Electrocatalytic Nitrate Reduction toward Ammonia by Nearly 100

Improving the selective ammonia production capacity of electrocatalytic nitrate reduction reaction (NO3 RR) at ambient conditions is critical to the future development and industrial application of electrosynthesis of ammonia. However, the reaction involves multi-proton and electron transfer as well as the desorption and underutilization of intermediates, posing a challenge to the selectivity of NO3 RR. Here the electrodeposition site of Co is modulated by depositing Bi at the bottom of the catalyst, thus obtaining the Co+Bi@Cu NW catalyst with a Bi-Co corridor structure. In 50 mm NO3 - , Co+Bi@Cu NW exhibits a highest Faraday efficiency of ≈100% (99.51%), an ammonia yield rate of 1858.2 µg h-1  cm-2 and high repeatability at -0.6 V versus the reversible hydrogen electrode. Moreover, the change of NO2 - concentration on the catalyst surface observed by in situ reflection absorption imaging and the intermediates of the NO3 RR process detected by electrochemical in situ Raman spectroscopy together verify the NO2 - trapping effect of the Bi-Co corridor structure. It is believed that the measure of modulating the deposition site of Co by loading Bi element is an easy-to-implement general method for improving the selectivity of NH3 production as well as the corresponding scientific research and applications.

Fe-MOF Catalytic Nanoarchitectonic toward Electrochemical Ammonia Production

Electrochemical reduction of nitrate into ammonia has lately been identified as one among the promising solutions to address the challenges triggered by the growing global energy demand. Exploring newer electrocatalyst materials is vital to make this process effective and feasible. Recently, metal-organic framework (MOF)-based catalysts are being well investigated for electrocatalytic ammonia synthesis, accounting for their enhanced structural and compositional integrity during catalytic reduction reactions. In this study, we investigate the ability of the PCN-250-Fe3 MOF toward ammonia production in its pristine and activated forms. The activated MOF catalyst delivered a faradaic efficiency of about 90% at -1 V vs RHE and a yield rate of 2.5 × 10-4 mol cm-2 h-1, while the pristine catalyst delivered a 60% faradaic efficiency at the same potential. Theoretical studies further provide insights into the nitrate reduction reaction mechanism catalyzed by the PCN-250-Fe3 MOF catalyst. In short, simpler and cost-effective strategies such as pretreatment of electrocatalysts have an upper hand in aggravating the intrinsic material properties, for catalytic applications, when compared to conventional material modification approaches.

A Novel Integrated Flow-Electrode Capacitive Deionization and Flow Cathode System for Nitrate Removal and Ammonia Generation from Simulated Groundwater

Electrochemical reduction of nitrate is a promising method for the removal of nitrate from contaminated groundwater. However, the presence of hardness cations (Ca2+ and Mg2+) in groundwaters hampers the electroreduction of nitrate as a result of the precipitation of carbonate-containing solids of these elements on the cathode surface. Thus, some pretreatment process is required to remove unwanted hardness cations. Herein, we present a proof-of-concept of a novel three-chambered flow electrode unit, constituting a flow electrode capacitive deionization (FCDI) unit and a flow cathode (FC) unit, which achieves cation removal, nitrate capture and reduction, and ammonia generation in a single cell without the need for any additional chemicals/electrolyte. The addition of the FCDI unit not only achieves removal of hardness cations but also concentrates the nitrate ions and other anions, which facilitates nitrate reduction in the subsequent FC unit. Results show that the FCDI cell voltage influences electrode stability but has a minimal impact on the overall nitrate removal performance. The concentration of coexisting anions influences the nitrate removal due to competitive sorption of anions on the electrode surface. Our results further show that stable electrochemical performance was obtained over 26 h of operation. Overall, this study provides a scalable strategy for continuous nitrate electroreduction and ammonia generation from nitrate contaminated groundwaters containing hardness ions.

Breaking Local Charge Symmetry of Iron Single Atoms for Efficient Electrocatalytic Nitrate Reduction to Ammonia

The electrochemical conversion of nitrate pollutants into value-added ammonia is a feasible way to achieve artificial nitrogen cycle. However, the development of electrocatalytic nitrate-to-ammonia reduction reaction (NO3 - RR) has been hampered by high overpotential and low Faradaic efficiency. Here we develop an iron single-atom catalyst coordinated with nitrogen and phosphorus on hollow carbon polyhedron (denoted as Fe-N/P-C) as a NO3 - RR electrocatalyst. Owing to the tuning effect of phosphorus atoms on breaking local charge symmetry of the single-Fe-atom catalyst, it facilitates the adsorption of nitrate ions and enrichment of some key reaction intermediates during the NO3 - RR process. The Fe-N/P-C catalyst exhibits 90.3 % ammonia Faradaic efficiency with a yield rate of 17980 μg h-1  mgcat -1 , greatly outperforming the reported Fe-based catalysts. Furthermore, operando SR-FTIR spectroscopy measurements reveal the reaction pathway based on key intermediates observed under different applied potentials and reaction durations. Density functional theory calculations demonstrate that the optimized free energy of NO3 - RR intermediates is ascribed to the asymmetric atomic interface configuration, which achieves the optimal electron density distribution. This work demonstrates the critical role of atomic-level precision modulation by heteroatom doping for the NO3 - RR, providing an effective strategy for improving the catalytic performance of single atom catalysts in different electrochemical reactions.

Nanoengineering Metal-Organic Frameworks and Derivatives for Electrosynthesis of Ammonia

Electrocatalytic synthesis under mild conditions has become increasingly important as one of the practical alternatives for industrial applications, especially for the green ammonia (NH3) industry. A properly engineered electrocatalyst plays a vital role in the realization of superior catalytic performance. Among various types of promising nanomaterials, metal-organic frameworks (MOFs) are competitive candidates for developing efficient electrocatalytic NH3 synthesis from simple nitrogen-containing molecules or ions, such as N2 and NO3-. In this review, recent advances in the development of electrocatalysts derived from MOFs for the electrosynthesis of NH3 are collected, categorized, and discussed, including their application in the N2 reduction reaction (NRR) and the NO3- reduction reaction (NO3RR). Firstly, the fundamental principles are illustrated, such as plausible mechanisms of NH3 generation from N2 and NO3-, the apparatus of corresponding electrocatalysis, parameters for evaluation of reaction efficiency, and detection methods of yielding NH3. Then, the electrocatalysts for NRR processes are discussed in detail, including pristine MOFs, MOF-hybrids, MOF-derived N-doped porous carbons, single atomic catalysts from pyrolysis of MOFs, and other MOF-related materials. Subsequently, MOF-related NO3RR processes are also listed and discussed. Finally, the existing challenges and prospects for the rational design and fabrication of electrocatalysts from MOFs for electrochemical NH3 synthesis are presented, such as the evolution of investigation methods with artificial intelligence, innovation in synthetic methods of MOF-related catalysts, advancement of characterization techniques, and extended electrocatalytic reactions.

Metal-organic framework-derived Cu nanoparticle binder-free monolithic electrodes with multiple support structures for electrocatalytic nitrate reduction to ammonia

Electrocatalytic nitrate reduction to ammonia, which removes nitrates from aquatic ecosystems, is a potential alternative to the classical Haber-Bosch process. Nevertheless, the selectivity of ammonia is often affected by the toxic by-product nitrite. Here, the polyhedral-supported Cu nanoparticle binder-free monolithic electrode (Cu-BTC-Cu) is synthesized by the in situ electroreduction of Cu metal-organic framework (Cu-MOF) precursors. The Cu-BTC-Cu displays a high ammonia yield of 4.00 mg h-1 cm-2cat and a faradaic efficiency of 83.8% in 0.05 M K2SO4 (pH = 7), greatly outperforming the rod-supported (Cu-BTEC-Cu) and unsupported (Cu-BDC-Cu) Cu nanoparticle monolithic electrodes. Impressively, the Cu-BTC-Cu can inhibit significantly the release of by-product NO2- and present favourable stability after 10 consecutive cycles. These preeminent properties can be attributed to the polyhedral structure, which enables better dispersion of Cu nanoparticles and brings more active sites. Moreover, the reaction mechanism of Cu-BTC-Cu is analysed by electrochemical in situ characterization and several key intermediates are captured. This work provides new insights into the modification of the electrocatalytic nitrate reduction activity of Cu-based catalysts and ideas for the design of high-efficiency electrodes.

Atomic coordination environment engineering of bimetallic alloy nanostructures for efficient ammonia electrosynthesis from nitrate

Electrochemical nitrate reduction reaction (NO3RR) to ammonia has been regarded as a promising strategy to balance the global nitrogen cycle. However, it still suffers from poor Faradaic efficiency (FE) and limited yield rate for ammonia production on heterogeneous electrocatalysts, especially in neutral solutions. Herein, we report one-pot synthesis of ultrathin nanosheet-assembled RuFe nanoflowers with low-coordinated Ru sites to enhance NO3RR performances in neutral electrolyte. Significantly, RuFe nanoflowers exhibit outstanding ammonia FE of 92.9% and yield rate of 38.68 mg h-1 mgcat-1 (64.47 mg h-1 mgRu-1) at -0.30 and -0.65 V (vs. reversible hydrogen electrode), respectively. Experimental studies and theoretical calculations reveal that RuFe nanoflowers with low-coordinated Ru sites are highly electroactive with an increased d-band center to guarantee efficient electron transfer, leading to low energy barriers of nitrate reduction. The demonstration of rechargeable zinc-nitrate batteries with large-specific capacity using RuFe nanoflowers indicates their great potential in next-generation electrochemical energy systems.

Revealing the activity origin of ultrathin nickel metal-organic framework nanosheet catalysts for selective electrochemical nitrate reduction to ammonia: Experimental and density functional theory investigations

The electrochemical nitrate reduction reaction (NitRR) affords a sustainable way for nitrate mitigation and ammonia synthesis, but there are still some problems such as poor nitrate conversion, low ammonia selectivity, and slow reaction kinetics. A clear structure-performance relationship is essential for designing efficient catalysts and understanding the reaction mechanisms. Herein, ultrathin nickel metal-organic framework (Ni-MOF) nanosheets supported on Ni foam featuring a well-defined stable structure, large electrochemically active surface area, and low electron transport resistance were prepared by a one-step solvothermal process. At -1.4 V, the nitrate reduction, rate constant, ammonia selectivity, and yield reached 96.4%, 0.448 h^-1, 80%, and 110.13 ug·h^-1·cm^-2, respectively. Experimental and theoretical studies demonstrated that the hydroxyl-ligated Ni atoms exhibited higher nitrate adsorption properties and lower activation energy towards NitRR compared to carboxylic acid-ligated Ni atoms. Mechanism investigations revealed a nitrate-to-ammonia reaction pathway involving multiple intermediate species on Ni-MOF nanosheet catalysts. This work offers a new avenue to construct highly efficient electrocatalysts for the selective transformation of nitrate to valuable ammonia.

Subtle tuning of nanodefects actuates highly efficient electrocatalytic oxidation

Achieving controllable fine-tuning of defects in catalysts at the atomic level has become a zealous pursuit in catalysis-related fields. However, the generation of defects is quite random, and their flexible manipulation lacks theoretical basis. Herein, we present a facile and highly controllable thermal tuning strategy that enables fine control of nanodefects via subtle manipulation of atomic/lattice arrangements in electrocatalysts. Such thermal tuning endows common carbon materials with record high efficiency in electrocatalytic degradation of pollutants. Systematic characterization and calculations demonstrate that an optimal thermal tuning can bring about enhanced electrocatalytic efficiency by manipulating the N-centered annulation-volatilization reactions and C-based sp³/sp² configuration alteration. Benefiting from this tuning strategy, the optimized electrocatalytic anodic membrane successfully achieves >99% pollutant (propranolol) degradation during a flow-through (~2.5 s for contact time), high-flux (424.5 L m^-2 h^-1), and long-term (>720 min) electrocatalytic filtration test at a very low energy consumption (0.029 ± 0.010 kWh m^-3 order^-1). Our findings highlight a controllable preparation approach of catalysts while also elucidating the molecular level mechanisms involved.

Continuous ammonia electrosynthesis using physically interlocked bipolar membrane at 1000 mA cm-2

Electrosynthesis of ammonia from nitrate reduction receives extensive attention recently for its relatively mild conditions and clean energy requirements, while most existed electrochemical strategies can only deliver a low yield rate and short duration for the lack of stable ion exchange membranes at high current density. Here, a bipolar membrane nitrate reduction process is proposed to achieve ionic balance, and increasing water dissociation sites is delivered by constructing a three-dimensional physically interlocked interface for the bipolar membrane. This design simultaneously boosts ionic transfer and interfacial stability compared to traditional ones, successfully reducing transmembrane voltage to 1.13 V at up to current density of 1000 mA cm-2. By combining a Co three-dimensional nanoarray cathode designed for large current and low concentration utilizations, a continuous and high yield bipolar membrane reactor for NH3 electrosynthesis realized a stable electrolysis at 1000 mA cm-2 for over 100 h, Faradaic efficiency of 86.2% and maximum yield rate of 68.4 mg h-1 cm-2 with merely 2000 ppm NO3- alkaline electrolyte. These results show promising potential for artificial nitrogen cycling in the near future.

Enabled Efficient Ammonia Synthesis and Energy Supply in a Zinc-Nitrate Battery System by Separating Nitrate Reduction Process into Two Stages

The aqueous electrocatalytic reduction of NO₃ ^- into NH₃ (NitrRR) presents a sustainable route applicable to NH₃ production and potentially energy storage. However, the NitrRR involves a directly eight-electron transfer process generally required a large overpotential (<-0.2 V versus reversible hydrogen electrode (vs. RHE)) to reach optimal efficiency. Here, inspired by biological nitrate respiration, the NitrRR was separated into two stages along a [2+6]-electron pathway to alleviate the kinetic barrier. The system employed a Cu nanowire catalyst produces NO₂ ^- and NH₃ with current efficiencies of 91.5 % and 100 %, respectively at lower overpotentials (>+0.1 vs. RHE). The high efficiency for such a reduction process was further explored in a zinc-nitrate battery. This battery could be specified by a high output voltage of 0.70 V, an average energy density of 566.7 Wh L^-1 at 10 mA cm^-2 and a power density of 14.1 mW cm^-2 , which is well beyond all previously reported similar concepts.

Specifically adsorbed ferrous ions modulate interfacial affinity for high-rate ammonia electrosynthesis from nitrate in neutral media

The electrolysis of nitrate reduction to ammonia (NRA) is promising for obtaining value-added chemicals and mitigating environmental concerns. Recently, catalysts with high-performance ammonia synthesis from nitrate has been achieved under alkaline or acidic conditions. However, NRA in neutral solution still suffers from the low yield rate and selectivity of ammonia due to the low binding affinity and nucleophilicity of NO₃^-. Here, we confirmed that the in-situ-generated Fe(II) ions existed as specifically adsorbed cations in the inner Helmholtz plane (IHP) with a low redox potential. Inspired by this, a strategy (Fe-IHP strategy) was proposed to enhance NRA activity by tuning the affinity of the electrode-electrolyte interface. The specifically adsorbed Fe(II) ions [SA-Fe(II)] greatly alleviated the electrostatic repulsion around the interfaceresulting in a 10-fold lower in the adsorption-free energy of NO₃^- when compared to the case without SA-Fe(II). Meanwhile, the modulated interface accelerated the kinetic mass transfer process by 25 folds compared to the control. Under neutral conditions, a Faraday efficiency of 99.6%, a selectivity of 99%, and an extremely high NH₃ yield rate of 485.8 mmol h^-1 g^-1 _FeOOH were achieved. Theoretical calculations and in-situ Raman spectroscopy confirmed the electron-rich state of the SA-Fe(II) donated to p orbitals of N atom and favored the hydrogenation of *NO to *NOH for promoting the formation of high-selectivity ammonia. In sum, these findings complement the textbook on the specific adsorption of cations and provide insights into the design of low-cost NRA catalysts with efficient ammonia synthesis.

Sub-nm RuOx Clusters on Pd Metallene for Synergistically Enhanced Nitrate Electroreduction to Ammonia

The electrochemical nitrate reduction to ammonia reaction (NO3RR) has emerged as an appealing route for achieving both wastewater treatment and ammonia production. Herein, sub-nm RuOx clusters anchored on a Pd metallene (RuOx/Pd) are reported as a highly effective NO3RR catalyst, delivering a maximum NH3-Faradaic efficiency of 98.6% with a corresponding NH3 yield rate of 23.5 mg h-1 cm-2 and partial a current density of 296.3 mA cm-2 at -0.5 V vs RHE. Operando spectroscopic characterizations combined with theoretical computations unveil the synergy of RuOx and Pd to enhance the NO3RR energetics through a mechanism of hydrogen spillover and hydrogen-bond interactions. In detail, RuOx activates NO3- to form intermediates, while Pd dissociates H2O to generate *H, which spontaneously migrates to the RuOx/Pd interface via a hydrogen spillover process. Further hydrogen-bond interactions between spillovered *H and intermediates makes spillovered *H desorb from the RuOx/Pd interface and participate in the intermediate hydrogenation, contributing to the enhanced activity of RuOx/Pd for NO3--to-NH3 conversion.

Mesoporous PdN Alloy Nanocubes for Efficient Electrochemical Nitrate Reduction to Ammonia

Developing highly active and selective electrocatalysts for electrochemical nitrate reduction reaction (NITRR) is very important for synthesizing recyclable ammonia (NH₃ ) in an economic and environmentally friendly manner. Despite some encouraging progress, their activity and selectivity have been remarkably slower than expected. In this manuscript, mesoporous palladium-nonmetal (meso-PdX) nanocubes (NCs) are reported as a new series of highly efficient electrocatalysts for selective nitrate reduction reaction (NITRR) electrocatalysis to NH₃ . The samples feature uniformly alloyed compositions and highly penetrated mesopores with abundant highly active sites and optimized electronic structures. The best meso-PdN NCs hold an outstanding NITRR activity and selectivity with a remarkable NH₃ Faradaic efficiency of 96.1% and a yield rate of 3760 µg h^-1 mg^-1 , suppressing the state-of-the-art electrocatalysts. Meanwhile, meso-PdN NCs are electrocatalytically stable, retaining well the activity and selectivity of NO₃ ^- -to-NH₃ electrocatalysis for more than 20 cycles. Detailed mechanism studies ascribe the superior performance to combined compositional and structural synergies of meso-PdN NCs that not only promote the adsorption (reactivity) of NO₃ ^- and the desorption of NH₃ but also increase the retention time of key intermediates for the deeper NITRR electrocatalysis to NH₃ through an eight-electron pathway.

Co-Doped Fe3S4 Nanoflowers for Boosting Electrocatalytic Nitrogen Fixation to Ammonia under Mild Conditions

Compared with the Haber Bosch process, the electrochemical nitrogen reduction reaction (NRR) under mild conditions provides an alternative and promising route for ammonia synthesis due to its green and sustainable features. However, the great energy barrier to break the stable N≡N bond hinders the practical application of NRR. Though Fe is the only common metal element in all biological nitrogenases in nature, there is still a lack of study on developing highly efficient and low-cost Fe-based catalysts for N₂ fixation. Herein, Co-doped Fe₃S₄ nanoflowers were fabricated as the intended catalyst for NRR. The results indicate that 4% Co-doped Fe₃S₄ nanoflowers achieve a high Faradaic efficiency of 17% and a NH₃ yield rate of 37.5 μg·h^-1·mg^-1_cat. at -0.55 V versus RHE potential in 0.1 M HCl, which is superior to most Fe-based catalysts. The introduction of Co atoms can not only shift the partial density states of Fe₃S₄ toward the Fermi level but also serve as new active centers to promote N₂ absorption, lowering the energy barrier of the potential determination step to accelerate the catalytic process. This work paves a pathway of the morphology and doping engineering for Fe-based electrocatalysts to enhance ammonia synthesis.

Electrochemical Reduction of Nitrate with Simultaneous Ammonia Recovery Using a Flow Cathode Reactor

The presence of excessive concentrations of nitrate in industrial wastewaters, agricultural runoff, and some groundwaters constitutes a serious issue for both environmental and human health. As a result, there is considerable interest in the possibility of converting nitrate to the valuable product ammonia by electrochemical means. In this work, we demonstrate the efficacy of a novel flow cathode system coupled with ammonia stripping for effective nitrate removal and ammonia generation and recovery. A copper-loaded activated carbon slurry (Cu@AC), made by a simple, low-cost wet impregnation method, is used as the flow cathode in this novel electrochemical reactor. Use of a 3 wt % Cu@AC suspension at an applied current density of 20 mA cm^-2 resulted in almost complete nitrate removal, with 97% of the nitrate reduced to ammonia and 70% of the ammonia recovered in the acid-receiving chamber. A mathematical kinetic model was developed that satisfactorily describes the kinetics and mechanism of the overall nitrate electroreduction process. Minimal loss of Cu to solution and maintenance of nitrate removal performance over extended use of Cu@AC flow electrode augers well for long-term use of this technology. Overall, this study sheds light on an efficient, low-cost water treatment technology for simultaneous nitrate removal and ammonia generation and recovery.

Iron-Based Nanocatalysts for Electrochemical Nitrate Reduction

Nitrate has a high level of stability and persistence in water, endangering human health and aquatic ecosystems. Due to its high reliability and efficiency, the electrochemical nitrate reduction reaction (NO₃ RR) is regarded as the best available option for mitigating excess nitrate in water and wastewater, especially for the removal of trace levels of nitrate. One of the most critical factors in the electrochemical reduction are the catalysts, which directly affect the reaction efficiency of nitrate removal. Iron-based nanocatalysts, which have the advantages of nontoxicity, wide availability, and low cost, have emerged as a promising electrochemical NO₃ RR material in recent years. This review covers major aspects of iron-based nanocatalysts for electrochemical NO₃ RR, including synthetic methods, structural design, performance enhancement, electrocatalytic nitrate reduction test, and reduction mechanism. The recent progress of iron-based nanocatalysts for electrochemical NO₃ RR and the mechanism of functional advantages for modified structures are reviewed from the perspectives of loading, doping, and assembly strategies, in order to realize the conversion from pollutant nitrate to harmless nitrogen or ammonia and other sustainable products. Finally, challenges and future directions for the development of low-cost and highly-efficient iron-based nanocatalysts are explored.

Nitrate-to-Ammonia Conversion at an InSn-Enriched Liquid-Metal Electrode

The renewable energy driven electrochemical conversion of nitrates to ammonia is emerging as a viable route for the creation of this hydrogen carrier. However, the creation of highly efficient electrocatalysts that show prolonged stability is an ongoing challenge. Here we show that room temperature liquid metal Galinstan can be used as an efficient and stable electrocatalyst for nitrate conversion to ammonia achieving rates of up to 2335 μg h⁻¹ cm⁻² with a Faradaic efficiency of 100 %. Density functional theory (DFT) calculations and experimental observation indicated the activity is due to InSn alloy enrichment within the liquid metal that occurs during the electrocatalytic reaction. This high selectivity for NH₃ is also due to additional suppression of the competing hydrogen evolution reaction at the identified In₃Sn active site. This work adds to the increasing applicability of liquid metals based on Ga for clean energy technologies.