Characterizing applications, exposure risks, and hazard communication for engineered nanomaterials in construction

BACKGROUND

Engineered nanomaterials (ENMs) may pose health risks to workers. Objectives were to characterize ENM applications in construction, identify exposure scenarios, and evaluate the quality of safety data sheets (SDSs) for nano-enabled construction products.

METHODS

SDSs and product data were obtained from a public database of nano-enabled construction products. Descriptive statistics were calculated for affected trades, product categories, and types of ENMs. A sample of SDSs (n = 33) was evaluated using modified criteria developed by NIOSH researchers. Bulk analysis via transmission electron microscopy characterized nanoparticles in a subset of products.

RESULTS

Companies report using >50 ENMs in construction products. ENM composition could not be determined via SDSs for 38.1% of the 907 products examined. Polymers and metal oxides tied for most frequently reported ENMs (n = 87, 9.6%). Nano silica, graphene, carbon nanotubes, and silver nanoparticles were also frequently reported. Most of the products were paints and coatings (n = 483, 53.3%), followed by pre-market additives, cementitious materials, insulation, and lubricants. Workers in twenty construction trades are likely to handle nano-enabled products, these particularly encompass cement and brick masons, painters, laborers, carpenters, glaziers, and insulators. A wide range of exposure scenarios were identified. SDSs were classified as satisfactory (18%), in need of improvement (12%), or in need of significant improvement (70%). Bulk analyses revealed discrepancies between actual ENM composition and those in SDSs.

DISCUSSION AND CONCLUSION

There has been significant progress investigating risks to construction workers posed by ENMs, but SDSs need major improvements. This study provides new insights on the use of ENMs in construction, exposure risks, and hazard communication.

Exposure control measures proposed by different organizations: the curious case of nanomaterial-involved activities

Objectives. The unique properties of nanomaterials have turned them into an emerging threat for humans and the environment. This study therefore aimed to review exposure control measures proposed for nanomaterial-involved activities. Methods. This study is based on the published guidelines of different organizations on safe handling of nanomaterials. The search for documents was provided using the keywords 'Exposure controls', 'Good practices', 'Working safely', 'Safe practices', 'Handling safely', 'Safety guide' and 'Safety and health', combined with 'Nanomaterials', 'Nanotechnology' and 'Nanoparticles' on different databases and websites. Results. Thirty-one guidelines from 27 organizations were included. Most of the guidelines recommended engineering controls, administrative controls and personal protective equipment (PPE). Changing the physical form of nanomaterials or the process, using prevention through design (PtD) and using green chemistry principals were other suggestions to reduce exposure to nanomaterials. Conclusions. Considering the difficulty of implementation and case specificity of the solutions of the first two priorities of the hierarchy of controls (elimination and substitution), the emphasis of the guidelines on the next three priorities for controlling exposure to nanomaterials is understood. The type and method of using PPE and engineering controls should be resolved by referring to cutting-edge articles.

Carbon nanotubes and nanofibers seen as emerging threat to fish: Historical review and trends

Since the discovery of the third allotropic carbon form, carbon-based one-dimensional nanomaterials (1D-CNMs) became an attractive and new technology with different applications that range from electronics to biomedical and environmental technologies. Despite their broad application, data on environmental risks remain limited. Fish are widely used in ecotoxicological studies and biomonitoring programs. Thus, the aim of the current study was to summarize and critically analyze the literature focused on investigating the bioaccumulation and ecotoxicological impacts of 1D-CNMs (carbon nanotubes and nanofibers) on different fish species. In total, 93 articles were summarized and analyzed by taking into consideration the following aspects: bioaccumulation, trophic transfer, genotoxicity, mutagenicity, organ-specific toxicity, oxidative stress, neurotoxicity and behavioral changes. Results have evidenced that the analyzed studies were mainly carried out with multi-walled carbon nanotubes, which were followed by single-walled nanotubes and nanofibers. Zebrafish (Danio rerio) was the main fish species used as model system. CNMs' ecotoxicity in fish depends on their physicochemical features, functionalization, experimental design (e.g. exposure time, concentration, exposure type), as well as on fish species and developmental stage. CNMs' action mechanism and toxicity in fish are associated with oxidative stress, genotoxicity, hepatotoxicity and cardiotoxicity. Overall, fish are a suitable model system to assess the ecotoxicity of, and the environmental risk posed by, CNMs.

Effect biomarkers of nanoparticle-exposed workers: A scoping review

The widespread and increasing use of engineered nanomaterials (i.e., particulate materials measuring 1-100 nanometers (nm) in at least one dimension) poses a potential health and safety risk to exposed workers. The unique properties of nanomaterials have made nanomaterials useful in multiple industries. However, their production and use may compromise worker health, presenting an emerging occupational health hazard, the acute and chronic effects of which have not been fully assessed. In this scoping review, we critically assess the literature on biomarkers of effect from nanoparticles and discuss the utility of biomonitoring as a means of assessing the physiological effects of nanoparticle exposure among nanotechnology workers. Multiple databases were queried based on select inclusion and exclusion criteria according to PRISMA guidelines, and articles were independently screened by two topic experts. Of 286 articles initially retrieved, 28 were included after screening and eligibility. The reviewed articles indicated that sensitive effect biomarkers could reflect early health effects of exposure to nanoparticles in the workplace and may be useful for monitoring toxicological effects and associated risks.

Towards a surface metric to measure the dustiness of nanomaterial powders

The relevance of dustiness methods is increasingly recognized in the preliminary exposure evaluation of workers handling nanomaterials in powder form, and should also be transposed to the assessment of environmental risk in the future. The methods currently recommended in the European standards are mainly based on determining a mass-based dustiness index [mg kg^-1], whereas surface area is regularly put forward as a more appropriate determinant to assess the pulmonary toxicity of nanoparticles. In this study, we describe an operational methodology leading us to propose a surface metric to determine the dustiness index [m² kg^-1] of nanoparticulate matter. To this end, we demonstrate the equivalence between the external specific surface area of a nanopowder and that of its aerosol with five nanomaterials produced and used on an industrial scale, and covering a range of external specific surface areas from 35 to 230 m² g^-1. Compared to the conventional mass-based dustiness index, the surface-based dustiness index (1) is more discriminating, covering an additional order of magnitude, and (2) has an impact on the powder ranking with potential consequences on the preventive measures to be implemented. Finally, our proposal has the potential to be included in future revisions of European standards for workplace exposure and dustiness measurement, provided that further experimental results on surface-based dustiness indices support these preliminary data.

Direct-reading instruments for aerosols: A review for occupational health and safety professionals part 2: Applications

Direct reading instruments (DRIs) for aerosols have been used in industrial hygiene practice for many years, but their potential has not been fully realized by many occupational health and safety professionals. Although some DRIs quantify other metrics, this article will primarily focus on DRIs that measure aerosol number, size, or mass. This review addresses three applications of aerosol DRIs that occupational health and safety professionals can use to discern, characterize, and document exposure conditions and resolve aerosol-related problems in the workplace. The most common application of aerosol DRIs is the evaluation of engineering controls. Examples are provided for many types of workplaces and situations including construction, agriculture, mining, conventional manufacturing, advanced manufacturing (nanoparticle technology and additive manufacturing), and non-industrial sites. Aerosol DRIs can help identify the effectiveness of existing controls and, as needed, develop new strategies to reduce potential aerosol exposures. Aerosol concentration mapping (ACM) using DRI data can focus attention on emission sources in the workplace spatially illustrate the effectiveness of controls and constructively convey concerns to management and workers. Examples and good practices of ACM are included. Video Exposure Monitoring (VEM) is another useful technique in which video photography is synced with the concentration output of an aerosol DRI. This combination allows the occupational health and safety professional to see what tasks, environmental situations, and/or worker actions contribute to aerosol concentration and potential exposure. VEM can help identify factors responsible for temporal variations in concentration. VEM can assist with training, engage workers, convince managers about necessary remedial actions, and provide for continuous improvement of the workplace environment. Although using DRIs for control evaluation, ACM and VEM can be time-consuming, the resulting information can provide useful data to prompt needed action by employers and employees. Other barriers to adoption include privacy and security issues in some worksites. This review seeks to provide information so occupational health and safety professionals can better understand and effectively use these powerful applications of aerosol DRIs.

Pulmonary Toxicity of Silica Linked to Its Micro- or Nanometric Particle Size and Crystal Structure: A Review

Silicon dioxide (SiO2) is a mineral compound present in the Earth’s crust in two mineral forms: crystalline and amorphous. Based on epidemiological and/or biological evidence, the pulmonary effects of crystalline silica are considered well understood, with the development of silicosis, emphysema, chronic bronchitis, or chronic obstructive pulmonary disease. The structure and capacity to trigger oxidative stress are recognized as relevant determinants in crystalline silica’s toxicity. In contrast, natural amorphous silica was long considered nontoxic, and was often used as a negative control in experimental studies. However, as manufactured amorphous silica nanoparticles (or nanosilica or SiNP) are becoming widely used in industrial applications, these paradigms must now be reconsidered at the nanoscale (<100 nm). Indeed, recent experimental studies appear to point towards significant toxicity of manufactured amorphous silica nanoparticles similar to that of micrometric crystalline silica. In this article, we present an extensive review of the nontumoral pulmonary effects of silica based on in vitro and in vivo experimental studies. The findings of this review are presented both for micro- and nanoscale particles, but also based on the crystalline structure of the silica particles.

Time course of pulmonary inflammation and trace element biodistribution during and after sub-acute inhalation exposure to copper oxide nanoparticles in a murine model

Background

It has been shown that copper oxide nanoparticles (CuO NPs) induce pulmonary toxicity after acute or sub-acute inhalation exposures. However, little is known about the biodistribution and elimination kinetics of inhaled CuO NPs from the respiratory tract. The purposes of this study were to observe the kinetics of pulmonary inflammation during and after CuO NP sub-acute inhalation exposure and to investigate copper (Cu) biodistribution and clearance rate from the exposure site and homeostasis of selected trace elements in secondary organs of BALB/c mice.

Results

Sub-acute inhalation exposure to CuO NPs led to pulmonary inflammation represented by increases in lactate dehydrogenase, total cell counts, neutrophils, macrophages, inflammatory cytokines, iron levels in bronchoalveolar lavage (BAL) fluid, and lung weight changes. Dosimetry analysis in lung tissues and BAL fluid showed Cu concentration increased steadily during exposure and gradually declined after exposure. Cu elimination from the lung showed first-order kinetics with a half-life of 6.5 days. Total Cu levels were significantly increased in whole blood and heart indicating that inhaled Cu could be translocated into the bloodstream and heart tissue, and potentially have adverse effects on the kidneys and spleen as there were significant changes in the weights of these organs; increase in the kidneys and decrease in the spleen. Furthermore, concentrations of selenium in kidneys and iron in spleen were decreased, pointing to disruption of trace element homeostasis.

Conclusions

Sub-acute inhalation exposure of CuO NPs induced pulmonary inflammation, which was correlated to Cu concentrations in the lungs and started to resolve once exposure ended. Dosimetry analysis showed that Cu in the lungs was translocated into the bloodstream and heart tissue. Secondary organs affected by CuO NPs exposure were kidneys and spleen as they showed the disruption of trace element homeostasis and organ weight changes.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-022-00480-z.

Towards health-based nano reference values (HNRVs) for occupational exposure: Recommendations from an expert panel

Unique physicochemical characteristics of engineered nanomaterials (ENMs) suggest the need for nanomaterial-specific occupational exposure limits (OELs). Setting these limits remains a challenge. Therefore, the aim of this study was to set out a framework to evaluate the feasibility of deriving advisory health-based occupational limit values for groups of ENMs, based on scientific knowledge. We have used an expert panel approach to address three questions: 1) What ENM-categories should be distinguished to derive advisory health-based occupational limit values (or health-based Nano Reference Values, HNRVs) for groups of ENMs? 2) What evidence would be needed to define values for these categories? And 3) How much effort would it take to achieve this? The panel experts distinguished six possible categories of HNRVs: A) WHO-fiber-like high aspect ratio ENMs (HARNs), B) Non-WHO-fiber-like HARNs and other non-spheroidal ENMs, C) readily soluble spheroidal ENMs, D) biopersistent spheroidal ENMs with unknown toxicity, E) biopersistent spheroidal ENMs with substance-specific toxicity and F) biopersistent spheroidal ENMs with relatively low substance-specific toxicity. For category A, the WHO-fiber-like HARNs, agreement was reached on criteria defining this category and the approach of using health-based risk estimates for asbestos to derive the HNRV. For category B, a quite heterogeneous category, more toxicity data are needed to set an HNRV. For category C, readily soluble spheroidal ENMs, using the OEL of their molecular or ionic counterpart would be a good starting point. For the biopersistent ENMs with unknown toxicity, HNRVs cannot be applied as case-by-case testing is required. For the other biopersistent ENMs in category E and F, we make several recommendations that can facilitate the derivation of these HNRVs. The proposed categories and recommendations as outlined by this expert panel can serve as a reference point for derivation of HNRVs when health-based OELs for ENMs are not yet available.

A systematic review on the effects of nanomaterials on gut microbiota

•

Nanomaterials have been shown to affect gut microbiota (GM) both in vivo and in vitro.

•

The effects have been shown to depend on size, dose, dose duration and functional groups.

•

In general, more studies seem to indicate dose-dependent adverse effects of NMs towards GM.

•

Standardized protocols are needed for characterization of NMs, dosing, and test systems (both in vitro and in vivo).

Some nanomaterials (NMs) have been shown to possess antimicrobial activity and cause GM dysbiosis. Since NMs are being used widely, a systematic assessment of the effects of NMs on GM is warranted. In this systematic review, a total of 46 in vivo and 22 in vitro studies were retrieved from databases and search engines including Science-Direct, Pubmed and Google scholar. Criteria for assessment of studies included use of in vitro or in vivo studies, characterization of NMs, use of single or multiple doses as well as consistency of results. GM dysbiosis has been studied most widely on TiO₂, Ag, Zn-based NMs. There was moderate evidence for GM dysbiosis caused by Zn- and Cu-based NMs, Cu-loaded chitosan NPs and Ag NMs, and anatase TiO₂ NPs, as well as low evidence for SWCNTs, nanocellulose, SiO₂, Se, nanoplastics, CeO_2, MoO₃ and graphene-based NMs. Most studies indicate adverse effects of NMs towards GM. However, more work is required to elucidate the differences on the reported effects of NM by type and sex of organisms, size, shape and surface properties of NMs as well as effects of exposure to mixtures of NMs. For consistency and better agreement among studies on GM dysbiosis, there is need for internationally agreed protocols on, inter alia, characterization of NMs, dosing (amounts, frequency and duration), use of sonication, test systems (both in vitro and in vivo), including oxygen levels for in vitro models.

Characterization of Occupational Exposures to Engineered Nanoparticles During the Finishing Process of a Hardwood Floor Manufacturing Plant

Engineered nanomaterials (ENMs) have an enormous economic impact. In the surface coating industry, titanium dioxide (TiO2) and silicon dioxide (SiO2) nanoparticles are commonly incorporated into varnishes, paints, and finishing products. These ENMs are used for UV-active properties and self-cleaning activities, as well as for the durability and resistance they provide. However, several health concerns are associated with the inhalation of some ENMs. In this case study, occupational exposures to engineered nanoparticles were investigated in an industrial hardwood floor manufacturing plant during the finishing task of an automated spraying equipment. A combination of air and surface sampling was carried out during two workdays. Airborne and deposited particles were measured using a combination of real-time and filter-based sampling methods and analyzed by microscopy and spectrometry. Results indicate that the wood floor coating process generates airborne TiO2 and SiO2 nanoparticles which include individual particles in the nanoscale range (lower than 100 nm) and agglomerated particles of several hundred nanometers containing individual nanoparticles. Finishing activities significantly increased total particle number concentrations (45 620 and 117 880 particles cm-3) and surface-specific mass concentrations (154 µm2 cm-3). Concentrations of TiO2 ranged from 13 to 97 µg m-3 for personal measurements and from 36 to 55 µg m-3 for ambient measurements in the finishing location. Characterization of the deposited particles indicated the dispersion of the engineered airborne nanoparticles from the finishing location to the packaging area. Using a multimetric approach, this study shows high evidence that the worker was exposed to engineered TiO2 and SiO2 nanoparticles during the finishing process of the wood floor production facility. In addition, this study indicates that workers outside the finish spray area could be exposed to airborne engineered TiO2 and SiO2 nanoparticles coming from the finishing process.

Assessing the Toxicological Relevance of Nanomaterial Agglomerates and Aggregates Using Realistic Exposure In Vitro

Low dose repeated exposures are considered more relevant/realistic in assessing the health risks of nanomaterials (NM), as human exposure such as in workplace occurs in low doses and in a repeated manner. Thus, in a three-week study, we assessed the biological effects (cell viability, cell proliferation, oxidative stress, pro-inflammatory response, and DNA damage) of titanium-di-oxide nanoparticle (TiO₂ NP) agglomerates and synthetic amorphous silica (SAS) aggregates of different sizes in human bronchial epithelial (HBE), colon epithelial (Caco2), and human monocytic (THP-1) cell lines repeatedly exposed to a non-cytotoxic dose (0.76 µg/cm²). We noticed that neither of the two TiO₂ NPs nor their agglomeration states induced any effects (compared to control) in any of the cell lines tested while SAS aggregates induced some significant effects only in HBE cell cultures. In a second set of experiments, HBE cell cultures were exposed repeatedly to different SAS suspensions for two weeks (first and second exposure cycle) and allowed to recover (without SAS exposure, recovery period) for a week. We observed that SAS aggregates of larger sizes (size ~2.5 µm) significantly affected the cell proliferation, IL-6, IL-8, and total glutathione at the end of both exposure cycle while their nanosized counterparts (size less than 100 nm) induced more pronounced effects only at the end of the first exposure cycle. As noticed in our previous short-term (24 h) exposure study, large aggregates of SAS did appear to be similarly potent as nano sized aggregates. This study also suggests that aggregates of SAS of size greater than 100 nm are toxicologically relevant and should be considered in risk assessment.

Emissions and exposures of graphene nanomaterials, titanium dioxide nanofibers, and nanoparticles during down-stream industrial handling

Today, engineered nanomaterials are frequently used. Nanosized titanium dioxide (TiO2) has been extensively used for many years and graphene is one type of emerging nanomaterial. Occupational airborne exposures to engineered nanomaterials are important to ensure safe workplaces and to extend the information needed for complete risk assessments. The main aim of this study was to characterize workplace emissions and exposure of graphene nanoplatelets, graphene oxide, TiO2 nanofibers (NFs) and nanoparticles (NPs) during down-stream industrial handling. Surface contaminations were also investigated to assess the potential for secondary inhalation exposures. In addition, a range of different sampling and aerosol monitoring methods were used and evaluated. The results showed that powder handling, regardless of handling graphene nanoplatelets, graphene oxide, TiO2 NFs, or NPs, contributes to the highest particle emissions and exposures. However, the exposure levels were below suggested occupational exposure limits. It was also shown that a range of different methods can be used to selectively detect and quantify nanomaterials both in the air and as surface contaminations. However, to be able to make an accurate determination of which nanomaterial that has been emitted a combination of different methods, both offline and online, must be used.

Occupational Exposures to Engineered Nanomaterials: a Review of Workplace Exposure Assessment Methods

PURPOSE OF REVIEW

The purpose of this review is to consolidate exposure assessment methods for occupational research on engineered nanomaterials (ENMs) published within the past 5 years (2015-2020).

RECENT FINDINGS

The three ENMs that generated the highest volume of new research include titanium dioxide, graphene, and aluminum oxide. A multi-metric approach, using both online and offline instruments and analyses, has been found to be a useful method to characterize ENM workplace exposures and was commonly used in the recently published literature. Particle number concentration was the most common online exposure metric used, followed by the metrics of mass and surface area. There are currently no consensus methods for offline analyses of most ENMs. Researchers generally used gravimetric or elemental analyses for carbonaceous nanomaterials, titanium dioxide, and other nanometals, but there was little overlap between other ENM materials reviewed. Using biological markers of exposure, such as urinary oxidative stress biomarkers, as an indication of chronic exposure may also be useful for some ENMs and should be further researched. Generally, similar online instrumentation and offline electron microscopy methods were used for all ENMs. However, this consistency was not observed for offline mass analysis methods within specific ENMs. Consolidation of the most recent methods and results of exposure assessments within this broad material category can guide researchers toward future areas of study. Establishing consensus methods of exposure assessment for each individual ENM is crucial to characterizing workplace exposures, pooling data to fully understand their associated risks, and developing useful occupational exposure limits.

Micro- and Nanosized Substances Cause Different Autophagy-Related Responses

With rapid industrialization, humans produce an increasing number of products. The composition of these products is usually decomposed. However, some substances are not easily broken down and gradually become environmental pollutants. In addition, these substances may cause bioaccumulation, since the substances can be fragmented into micro- and nanoparticles. These particles or their interactions with other toxic matter circulate in humans via the food chain or air. Whether these micro- and nanoparticles interfere with extracellular vesicles (EVs) due to their similar sizes is unclear. Micro- and nanoparticles (MSs and NSs) induce several cell responses and are engulfed by cells depending on their size, for example, particulate matter with a diameter ≤2.5 μm (PM2.5). Autophagy is a mechanism by which pathogens are destroyed in cells. Some artificial materials are not easily decomposed in organisms. How do these cells or tissues respond? In addition, autophagy operates through two pathways (increasing cell death or cell survival) in tumorigenesis. Many MSs and NSs have been found that induce autophagy in various cells and tissues. As a result, this review focuses on how these particles interfere with cells and tissues. Here, we review MSs, NSs, and PM2.5, which result in different autophagy-related responses in various tissues or cells.

Producers of Engineered Nanomaterials-What Motivates Company and Worker Participation in Biomonitoring Programs?

Production and handling of engineered nanomaterials (ENMs) can yield worker exposure to these materials with the potential for unforeseen negative health effects. Biomonitoring enables regular exposure and health assessment and an effective risk management. We aimed to identify factors influencing biomonitoring acceptance according to hierarchical positions of ENM producers. Managers and workers were invited to complete an online questionnaire. Forty-three companies producing or handling ENMs such as titanium dioxide (61%) and multi-walled carbon nanotubes (44%) participated. The majority of managers (72%) and all workers responded positively to participating in biomonitoring studies. The main reasons for refusing participation included concerns about data confidentiality and sufficient knowledge about ENM health and safety. Acquisitions of individual study results, improvement of workers’ safety, and help to the development of ENM-specific health and safety practice were among the most valuable reasons for positively considering participation. All workers indicated feeling comfortable with biomonitoring procedures of exhaled air sampling—about half were similarly comfortable with exhaled breath condensate, urine, and buccal cell sampling. The majority of both workers and managers stated that participation in a biomonitoring program should take place during working hours. Although our survey only had limited participation, our results are useful in designing appropriate biomonitoring programs for workers exposed to ENMs.

Novel pH-responsive nanohybrid for simultaneous delivery of doxorubicin and paclitaxel: an in-silico insight

BACKGROUND

The distribution of drugs could not be controlled in the conventional delivery systems. This has led to the developing of a specific nanoparticle-based delivery system, called smart drug delivery systems. In cancer therapy, innovative biocompatible nanocarriers have received much attention for various ranges of anti-cancer drugs. In this work, the effect of an interesting and novel copolymer named "dimethyl acrylamide-trimethyl chitosan" was investigated on delivery of paclitaxel and doxorubicin applying carboxylated fullerene nanohybrid. The current study was run via molecular dynamics simulation and quantum calculations based on the acidic pH differences between cancerous microenvironment and normal tissues. Furthermore, hydrogen bonds, radius of gyration, and nanoparticle interaction energies were studied here. Stimulatingly, a simultaneous pH and temperature-responsive system were proposed for paclitaxel and doxorubicin for a co-polymer. A pH-responsive and thermal responsive copolymer were utilized based on trimethyl chitosan and dimethyl acrylamide, respectively. In such a dualistic approach, co-polymer makes an excellent system to possess two simultaneous properties in one bio-polymer.

RESULTS

The simulation results proposed dramatic and indisputable effects of the copolymer in the release of drugs in cancerous tissues, as well as increased biocompatibility and drug uptake in healthy tissues. Repeated simulations of a similar article performed for the validation test. The results are very close to those of the reference paper.

CONCLUSIONS

Overall, conjugated modified fullerene and dimethyl acrylamide-trimethyl chitosan (DMAA-TMC) as nanohybrid can be an appropriate proposition for drug loading, drug delivery, and drug release on dual responsive smart drug delivery system.

Susceptibility Factors in Chronic Lung Inflammatory Responses to Engineered Nanomaterials

Engineered nanomaterials (ENMs) are products of the emerging nanotechnology industry and many different types of ENMs have been shown to cause chronic inflammation in the lungs of rodents after inhalation exposure, suggesting a risk to human health. Due to the increasing demand and use of ENMs in a variety of products, a careful evaluation of the risks to human health is urgently needed. An assessment of the immunotoxicity of ENMs should consider susceptibility factors including sex, pre-existing diseases, deficiency of specific genes encoding proteins involved in the innate or adaptive immune response, and co-exposures to other chemicals. This review will address evidence from experimental animal models that highlights some important issues of susceptibility to chronic lung inflammation and systemic immune dysfunction after pulmonary exposure to ENMs.

What does ergonomics have to do with nanotechnologies? A case study

Despite recent concerns for workers' health, exposure situations to nanoparticles can occur in numerous workplaces. Understanding how exposures occur considering human work in these transformations remains a crucial issue of nanotechnologies. The objective of this article is to understand exposure situations to nanoparticles, their determinants and the resources to act on them. This understanding was achieved by specific measurement of nanoparticles aerosols, combined with an analysis of work activity (actions performed and physical strain) in a rubber industry. The presentation of real time measurements, associated with the video of work situations, during confrontation interviews becomes a means of making exposing work activities visible, to analyze and transform them from the points of view formulated by the company's stakeholders. In this way, characterized "typical exposure situations" serve to trigger discussions and open up new spaces for debate highlighting how innovation affects work and gives rise to enhanced prevention projects.

Titanium dioxide nanoparticles induced the apoptosis of RAW264.7 macrophages through miR-29b-3p/NFAT5 pathway

Titanium dioxide nanoparticles (TiO₂ NPs) are widely found in consumer and industrial products, contributing to their prevalent presence in our surroundings. In this study, several miRNAs in the immuno-related pathways were found to be dysregulated in RAW264.7 cells after 24-h exposure to TiO₂ NPs, including miR-29b-3p, which had not been previously found to be associated with the dysregulation of immunity after exposure to TiO₂ NPs. The KEGG pathway and GO enrichment analysis suggested that miR-29b-3p functioned both in the T and B cell receptor signaling pathways. The NFAT5 gene was predicted to regulate miR-29b-3p using the MiRDB online database. The expression of miR-29b-3p and NFAT5 was found to be inversely correlated using qRT-PCR and western blotting analysis. Dual-luciferase reporter gene assays demonstrated the precise regulatory relationship between miR-29b-3p and NFAT5. The upregulation of miR-29b-3p was found to reinforce the apoptosis of cells, while no changes were found in terms of the cell cycle or cell proliferation, using MTT, cell apoptosis, and cycle detection experiments. Our results demonstrate that miR-29b-3p is involved in the response of RAW264.7 cells to exposure to TiO₂, proving evidence for the further study of the toxicity and mechanisms of nano-TiO₂ exposure.

Nanoparticles: An Experimental Study of Zinc Nanoparticles Toxicity on Marine Crustaceans. General Overview on the Health Implications in Humans

The presence of products containing nanoparticles or nanofibers is rapidly growing. Nanotechnology involves a wide spectrum of industrial fields. There is a lack of information regarding the toxicity of these nanoparticles in aqueous media. The potential acute toxicity of ZnO NPs using two marine crustacean species: the copepod Tigriopus fulvus and the amphypod Corophium insidiosum was evaluated. Acute tests were conducted on adults of T. Fulvus nauplii and C. insidiosum. Both test species were exposed for 96 h to 5 increasing concentrations of ZnO NPs and ZnSO4H2O, and the endpoint was mortality. Statistical analysis revealed that the mean LC50 values of both ZnO NPs and ZnSO4H2O (ZnO NPs: F = 59.42; P < 0.0015; ZnSO4H2O: F = 25.57; P < 0.0015) were significantly lower for Tigriopus fulvus than for Corophium insidiosum. This result confirms that the toxic effect could be mainly attributed to the Zn ions, confirming that the dissolution processes play a crucial role in the toxicity of the ZnO NPs.

Neurotoxicology of Nanomaterials

The remarkable advances coming about through nanotechnology promise to revolutionize many aspects of modern life; however, these advances come with a responsibility for due diligence to ensure that they are not accompanied by adverse consequences for human health or the environment. Many novel nanomaterials (having at least one dimension <100 nm) could be highly mobile if released into the environment and are also very reactive, which has raised concerns for potential adverse impacts including, among others, the potential for neurotoxicity. Several lines of evidence led to concerns for neurotoxicity, but perhaps none more than observations that inhaled nanoparticles impinging on the mucosal surface of the nasal epithelium could be internalized into olfactory receptor neurons and transported by axoplasmic transport into the olfactory bulbs without crossing the blood-brain barrier. From the olfactory bulb, there is concern that nanomaterials may be transported deeper into the brain and affect other brain structures. Of course, people will not be exposed to only engineered nanomaterials, but rather such exposures will occur in a complex mixture of environmental materials, some of which are incidentally generated particles of a similar inhalable size range to engineered nanomaterials. To date, most experimental studies of potential neurotoxicity of nanomaterials have not considered the potential exposure sources and pathways that could lead to exposure, and most studies of nanomaterial exposure have not considered potential neurotoxicity. Here, we present a review of potential sources of exposures to nanoparticles, along with a review of the literature on potential neurotoxicity of nanomaterials. We employ the linked concepts of an aggregate exposure pathway (AEP) and an adverse outcome pathway (AOP) to organize and present the material. The AEP includes a sequence of key events progressing from material sources, release to environmental media, external exposure, internal exposure, and distribution to the target site. The AOP begins with toxicant at the target site causing a molecular initiating event and, like the AEP, progress sequentially to actions at the level of the cell, organ, individual, and population. Reports of nanomaterial actions are described at every key event along the AEP and AOP, except for changes in exposed populations that have not yet been observed. At this last stage, however, there is ample evidence of population level effects from exposure to ambient air particles that may act similarly to engineered nanomaterials. The data give an overall impression that current exposure levels may be considerably lower than those reported experimentally to be neurotoxic. This impression, however, is tempered by the absence of long-term exposure studies with realistic routes and levels of exposure to address concerns for chronic accumulation of materials or damage. Further, missing across the board are "key event relationships", which are quantitative expressions linking the key events of either the AEP or the AOP, making it impossible to quantitatively project the likelihood of adverse neurotoxic effects from exposure to nanomaterials or to estimate margins of exposure for such relationships.

Pro-inflammatory effects of crystalline- and nano-sized non-crystalline silica particles in a 3D alveolar model

BACKGROUND

Silica nanoparticles (SiNPs) are among the most widely manufactured and used nanoparticles. Concerns about potential health effects of SiNPs have therefore risen. Using a 3D tri-culture model of the alveolar lung barrier we examined effects of exposure to SiNPs (Si10) and crystalline silica (quartz; Min-U-Sil) in the apical compartment consisting of human alveolar epithelial A549 cells and THP-1-derived macrophages, as well as in the basolateral compartment with Ea.hy926 endothelial cells. Inflammation-related responses were measured by ELISA and gene expression.

RESULTS

Exposure to both Si10 and Min-U-Sil induced gene expression and release of CXCL8, interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), interleukin-1α (IL-1α) and interleukin-1β (IL-1β) in a concentration-dependent manner. Cytokine/chemokine expression and protein levels were highest in the apical compartment. Si10 and Min-U-Sil also induced expression of adhesion molecules ICAM-1 and E-selectin in the apical compartment. In the basolateral endothelial compartment we observed marked, but postponed effects on expression of all these genes, but only at the highest particle concentrations. Geneexpressions of heme oxygenase-1 (HO-1) and the metalloproteases (MMP-1 and MMP-9) were less affected. The IL-1 receptor antagonist (IL-1RA), markedly reduced effects of Si10 and Min-U-Sil exposures on gene expression of cytokines and adhesion molecules, as well as cytokine-release in both compartments.

CONCLUSIONS

Si10 and Min-U-Sil induced gene expression and release of pro-inflammatory cytokines/adhesion molecules at both the epithelial/macrophage and endothelial side of a 3D tri-culture. Responses in the basolateral endothelial cells were only induced at high concentrations, and seemed to be mediated by IL-1α/β released from the apical epithelial cells and macrophages.

Agglomeration of titanium dioxide nanoparticles increases toxicological responses in vitro and in vivo

Background

The terms agglomerates and aggregates are frequently used in the regulatory definition(s) of nanomaterials (NMs) and hence attract attention in view of their potential influence on health effects. However, the influence of nanoparticle (NP) agglomeration and aggregation on toxicity is poorly understood although it is strongly believed that smaller the size of the NPs greater the toxicity. A toxicologically relevant definition of NMs is therefore not yet available, which affects not only the risk assessment process but also hinders the regulation of nano-products. In this study, we assessed the influence of NP agglomeration on their toxicity/biological responses in vitro and in vivo.

Results

We tested two TiO₂ NPs with different primary sizes (17 and 117 nm) and prepared ad-hoc suspensions composed of small or large agglomerates with similar dispersion medium composition. For in vitro testing, human bronchial epithelial (HBE), colon epithelial (Caco2) and monocytic (THP-1) cell lines were exposed to these suspensions for 24 h and endpoints such as cytotoxicity, total glutathione, epithelial barrier integrity, inflammatory mediators and DNA damage were measured. Large agglomerates of 17 nm TiO₂ induced stronger responses than small agglomerates for glutathione depletion, IL-8 and IL-1β increase, and DNA damage in THP-1, while no effect of agglomeration was observed with 117 nm TiO₂.

In vivo, C57BL/6JRj mice were exposed via oropharyngeal aspiration or oral gavage to TiO₂ suspensions and, after 3 days, biological parameters including cytotoxicity, inflammatory cell recruitment, DNA damage and biopersistence were measured. Mainly, we observed that large agglomerates of 117 nm TiO₂ induced higher pulmonary responses in aspirated mice and blood DNA damage in gavaged mice compared to small agglomerates.

Conclusion

Agglomeration of TiO₂ NPs influences their toxicity/biological responses and, large agglomerates do not appear less active than small agglomerates. This study provides a deeper insight on the toxicological relevance of NP agglomerates and contributes to the establishment of a toxicologically relevant definition for NMs.

State of knowledge on the occupational exposure to carbon nanotubes

Carbon nanotubes (CNT) trigger fascination as well as anxiety, given their unique physical and chemical properties, and continuing concerns around their possible health effects. CNT exposure assessment is an integral component of occupational and environmental epidemiology, risk assessment, and management. We conducted a systematic review to analyze the quality of CNT occupational exposure assessments in field studies and to assess the relevance of available quantitative data from occupational hygiene and epidemiological perspectives. PubMed and Scopus databases were searched for the period 2000-2018. To grade the quality of each study, we used a standardized grid of seven criteria. The first criterion addressed 12 items deemed most relevant CNT physical-chemical properties with respect to their in vitro and in vivo toxicity. We included 27 studies from 11 countries in the review and graded them high (n = 2), moderate (n = 15) and low quality (n = 10). Half of the studies measured elemental carbon mass concentration (EC) using different methods and aerosol fractions. In 85% of studies, the observed values exceed the US National Institute for Occupational Safety and Health Recommended Exposure Limit. The quantification of CNT agglomerates and/or CNT contained fibers becomes increasingly common although lacking methodological standardization. Work activities with the greatest mean CNT mass concentrations were non-enclosed and included sieving, harvesting, packaging, reactor cleaning, extrusion and pelletizing. Some of the large studies defined standardized job titles according to exposure estimates at corresponding workstations and classified them by decreasing CNT exposure level: technicians > engineers > chemists. The already initiated harmonization of CNT exposure assessment and result reporting need to continue to favor not only studies in the field, but also to identify companies and workers using CNTs to characterize their exposures as well as monitor their health. This will enable an objective and realistic evaluation of risks associated with CNT applications and an appropriate risk management.

Impacts of Organomodified Nanoclays and Their Incinerated Byproducts on Bronchial Cell Monolayer Integrity

Incorporation of engineered nanomaterials (ENMs) into nanocomposites using advanced manufacturing strategies is set to revolutionize diverse technologies. Of these, organomodified nanoclays (ONCs; i.e., smectite clays with different organic coatings) act as nanofillers in applications ranging from automotive to aerospace and biomedical systems. Recent toxicological evaluations increased awareness that exposure to ONC can occur along their entire life cycle, namely, during synthesis, handling, use, manipulation, and disposal. Compared to other ENMs, however, little information exists describing which physicochemical properties contribute to induced health risk. This study conducted high content screening on bronchial epithelial cell monolayers for coupled high-throughput in vitro assessment strategies aimed to evaluate acute toxicity of a library of ONCs (all of prevalent use) prior to and after simulated disposal by incineration. Coating-, incineration status-, and time-dependent effects were considered to determine changes in the pulmonary monolayer integrity, cell transepithelial resistance, apoptosis, and cell metabolism. Results showed that after exposure to each ONC at its half-maximal inhibitory concentration (IC₅₀) there is a material-induced toxicity effect with pristine nanoclay, for instance, displaying acute loss of monolayer coverage, resistance, and metabolism, coupled with increased number of apoptotic cells. Conversely, the other three ONCs tested displayed little loss of monolayer integrity; however, they exhibited differential coating-dependent increased apoptosis and up to 40-45% initial reduction in cell metabolism. Moreover, incinerated byproducts of ONCs exhibited significant loss of monolayer coverage and integrity, increased necrosis, with little evidence of monolayer re-establishment. These findings indicate that characteristics of organic coating type largely determine the mechanism of cytotoxicity and the ability of the monolayer to recover. Use of high content screening coupled with traditional in vitro assays proves to serve as a rapid pulmonary toxicity assessment tool to help define prevention by targeted physicochemical material properties design strategies.

A Quantitative Validation of the Control Banding Nanotool

Eleven years (by publication) years after the development and application of the control banding (CB) Nanotool for the qualitative assessment and control of engineered nanoparticles (ENP), there remains no quantitative gold standard to serve as an alternative to the qualitative assessment. Many CB models have been developed during the years subsequent to the initial development of the CB Nanotool and the literature continues to blossom with comparisons and applications of these various tools; however, these developments have hitherto been made in the absence of validating and verifying their effectiveness using existing, albeit limited, quantitative methods. This paper reviews the existing literature on the CB Nanotool to evaluate its effectiveness in a variety of settings and presents a summary of qualitative and quantitative information from its application in a broad range of ENP handling activities performed in two different research institutions. A total of 28 ENP activities were assessed using the CB Nanotool (Version 2.0). Due to the lack of guidance on a single exposure assessment methodology, a combination of real-time monitoring, filter analysis, and microscopic analysis was used to assess various quantitative metrics, including mass concentration, particle number concentration, and particle speciation. All the results indicated that the control outcomes from the CB Nanotool qualitative assessment were sufficient to prevent workers from being exposed to ENP at levels beyond established exposure limits or background levels. These data represent an independent quantitative validation of CB Nanotool risk level outcomes and give further credence to the use of the CB Nanotool to effectively control worker exposures in the absence of quantitative air monitoring results.

Current state of knowledge on the health effects of engineered nanomaterials in workers: a systematic review of human studies and epidemiological investigations

Objectives The widespread application of nano-enabled products and the increasing likelihood for workplace exposures make understanding engineered nanomaterial (ENM) effects in exposed workers a public and occupational health priority. The aim of this study was to report on the current state of knowledge on possible adverse effects induced by ENM in humans to determine the toxicological profile of each type of ENM and potential biomarkers for early detection of such effects in workers. Methods A systematic review of human studies and epidemiological investigations of exposed workers relative to the possible adverse effects for the most widely used ENM was performed through searches of major scientific databases including Web of Science, Scopus, and PubMed. Results Twenty-seven studies were identified. Most of the epidemiological investigations were cross-sectional. The review found limited evidence of adverse effects in workers exposed to the most commonly used ENM. However, some biological alterations are suggestive for possible adverse impacts. The primary targets of some ENM exposures were the respiratory and cardiovascular systems. Changes in biomarker levels compared with controls were also observed; however, limited exposure data and the relatively short period since the first exposure may have influenced the incidence of adverse effects found in epidemiological studies. Conclusions There is a need for longitudinal epidemiologic investigations with clear exposure characterizations for various ENM to discover potential adverse health effects and identify possible indicators of early biological alterations. In this state of uncertainty, precautionary controls for each ENM are warranted while further study of potential health effects continues.

Relative Differences in Concentration Levels during Sawing and Drilling of Car Bumpers Containing MWCNT and Organic Pigment

INTRODUCTION

Knowledge on the exposure characteristics, including release of nanomaterials, is especially needed in the later stages of nano-enabled products' life cycles to perform better occupational risk assessments. The objective of this study was to assess the concentrations during sawing and drilling in car bumpers containing multi-walled carbon nanotubes (MWCNTs) and nanosized organic pigment (OP) under variable realistic workplace situations related to the ventilation in the room and machine settings.

METHODS

Twelve different experiments were performed in triplicate (N = 36) using tools powered by induction engines that allow interference-free particle measurements. A DiSCmini was used to measure particle number concentrations, whereas particle size distributions were measured using Aerodynamic Particle Sizer (TSI), Scanning Mobility Particle Sizer (TSI), and Electrical Low Pressure Impactor (Dekati). In addition, inhalable particles were sampled using IOM samplers on filters for scanning electron microscope/energy-dispersive X-ray spectrometry (SEM/EDX) analyses. Data were analysed to estimate the effects of individual exposure determinants, in a two-stage modelling strategy using Autoregressive Integrated Moving Average models (stage 1) and subsequently combining first stage results in simulations using multiple linear regression models (stage 2).

RESULTS

In sawing experiments, partly melted carbon-rich particles (mainly ~2 to ~8 µm) were identified with SEM/EDX, whereas drilling experiments revealed no activity-related particles. In addition, no pristine engineered nanoparticles (MWCNTs and OP) were observed to be liberated from the matrix. Statistical analyses showed significant effects of a higher sawing speed, a reduction in air concentration due to mechanical ventilation, and less exposure during sawing of car bumpers containing MWCNTs compared to bumpers containing OP.

CONCLUSION

The experiments in this study give an indication of the effects of different abrasive activities (sawing, drilling), machine settings (sawing speed, drill size), mechanical ventilation, and material characteristics on the manufactured nano-objects, their agglomerates, and aggregates concentration levels.

Zinc Oxide Nanoparticle as a Novel Class of Antifungal Agents: Current Advances and Future Perspectives

Certain types of nanoparticles, especially zinc oxide nanoparticles (ZnONPs), are widely reported to be capable of the inhibition of harmful bacteria, yeasts, and filamentous fungi. The unique physicochemical and biological properties of ZnONPs also make them attractive to the food industry for use as a promising antifungal agent. This Review thoroughly introduces the preparation methods and antifungal properties of ZnONPs and analyzes their possible antifungal mechanisms. The applicability of ZnONPs in food packaging and nutritional supplements and as an antimicrobial additive is also documented. Moreover, evaluations for biological safety of ZnONPs are objectively reviewed in this paper. The discussions addressed in this Review not only have theoretical significance but also are conducive to the development of food safety, nutrition, and human health. The summarized knowledge and future perspectives outlined here are expected to promote and guide new research toward developing and optimizing the application of ZnONPs as a novel class of antifungal agents to help improve food quality as well as food safety in the near future.

Comparison between a low-voltage benchtop electron microscope and conventional TEM for number size distribution of nearly spherical shape constituent particles of nanomaterial powders and colloids

Nanomaterial powders and colloids are already a large industry and are expected to continue to grow rapidly. In the context of risk assessment associated with nanomaterials, characterization of nanoparticle size and morphology is required. Until now, the best method giving direct access to these parameters has been electron microscopy (EM), in particular, transmission electron microscopy (TEM). Although this method is widely used, several issues are highlighted such as cost, maintenance, sample representativity and damage for sensitive materials. Low-voltage transmission electron microscopes (LVTEMs) could be an alternative approach to solve some of these issues. This paper presents a first comparison between a benchtop LVTEM and a conventional device to determine the number size distribution of the constitutent particles of two polydispersed industrial powders (TiO₂ and SiO₂) with particle sizes close to 100 nm and two colloids referenced for their particle size (ERM FD 304 and NM 300 K). The samples were prepared with an optimized deposition protocol involving glow discharging and Alcian blue solution pre-treatment on the EM grids. The benchtop LVTEM produced a rather good resolution and the relative differences obtained for the median diameters D₅₀ are generally within ± 15 %. On the basis of these results, benchtop LVTEM could be promoted for identifying nanomaterials within the framework of risk assessment strategy.

Toxicological status of nanoparticles: What we know and what we don't know

The field of nanotechnology has grown exponentially during the last few decades, due in part to the use of nanoparticles in many manufacturing processes, as well as their potential as clinical agents for treatment of diseases and for drug delivery. This has created several new avenues by which humans can be exposed to nanoparticles. Unfortunately, investigations assessing the toxicological impacts of nanoparticles (i.e. nanotoxicity), as well as their possible risks to human health and the environment, have not kept pace with the rapid rise in their use. This has created a gap-in-knowledge and a substantial need for more research. Studies are needed to help complete our understanding of the mechanisms of toxicity of nanoparticles, as well as the mechanisms mediating their distribution and accumulation in cells and tissues and their elimination from the body. This review summarizes our knowledge on nanoparticles, including their various applications, routes of exposure, their potential toxicity and risks to human health.

Carbon nanotube and nanofiber exposure and sputum and blood biomarkers of early effect among U.S. workers

BACKGROUND

Carbon nanotubes and nanofibers (CNT/F) are increasingly used for diverse applications. Although animal studies suggest CNT/F exposure may cause deleterious health effects, human epidemiological studies have typically been small, confined to single workplaces, and limited in exposure assessment.

OBJECTIVES

We conducted an industrywide cross-sectional epidemiological study of 108 workers from 12 U.S. sites to evaluate associations between occupational CNT/F exposure and sputum and blood biomarkers of early effect.

METHODS

We assessed CNT/F exposure via personal breathing zone, filter-based air sampling to measure background-corrected elemental carbon (EC) (a CNT/F marker) mass and microscopy-based CNT/F structure count concentrations. We measured 36 sputum and 37 blood biomarkers. We used factor analyses with varimax rotation to derive factors among sputum and blood biomarkers separately. We used linear, Tobit, and unconditional logistic regression models to adjust for potential confounders and evaluate associations between CNT/F exposure and individual biomarkers and derived factors.

RESULTS

We derived three sputum and nine blood biomarker factors that explained 78% and 67%, respectively, of the variation. After adjusting for potential confounders, inhalable EC and total inhalable CNT/F structures were associated with the most sputum and blood biomarkers, respectively. Biomarkers associated with at least three CNT/F metrics were 72 kDa type IV collagenase/matrix metalloproteinase-2 (MMP-2), interleukin-18, glutathione peroxidase (GPx), myeloperoxidase, and superoxide dismutase (SOD) in sputum and MMP-2, matrix metalloproteinase-9, metalloproteinase inhibitor 1/tissue inhibitor of metalloproteinases 1, 8-hydroxy-2'-deoxyguanosine, GPx, SOD, endothelin-1, fibrinogen, intercellular adhesion molecule 1, vascular cell adhesion protein 1, and von Willebrand factor in blood, although directions of associations were not always as expected.

CONCLUSIONS

Inhalable rather than respirable CNT/F was more consistently associated with fibrosis, inflammation, oxidative stress, and cardiovascular biomarkers.

Biochemistry and biomedicine of quantum dots: from biodetection to bioimaging, drug discovery, diagnostics, and therapy

According to recent research, nanotechnology based on quantum dots (QDs) has been widely applied in the field of bioimaging, drug delivery, and drug analysis. Therefore, it has become one of the major forces driving basic and applied research. The application of nanotechnology in bioimaging has been of concern. Through in vitro labeling, it was found that luminescent QDs possess many properties such as narrow emission, broad UV excitation, bright fluorescence, and high photostability. The QDs also show great potential in whole-body imaging. The QDs can be combined with biomolecules, and hence, they can be used for targeted drug delivery and diagnosis. The characteristics of QDs make them useful for application in pharmacy and pharmacology. This review focuses on various applications of QDs, especially in imaging, drug delivery, pharmaceutical analysis, photothermal therapy, biochips, and targeted surgery. Finally, conclusions are made by providing some critical challenges and a perspective of how this field can be expected to develop in the future.

STATEMENT OF SIGNIFICANCE

Quantum dots (QDs) is an emerging field of interdisciplinary subject that involves physics, chemistry, materialogy, biology, medicine, and so on. In addition, nanotechnology based on QDs has been applied in depth in biochemistry and biomedicine. Some forward-looking fields emphatically reflected in some extremely vital areas that possess inspiring potential applicable prospects, such as immunoassay, DNA analysis, biological monitoring, drug discovery, in vitro labelling, in vivo imaging, and tumor target are closely connected to human life and health and has been the top and forefront in science and technology to date. Furthermore, this review has not only involved the traditional biochemical detection but also particularly emphasized its potential applications in life science and biomedicine.

Novel Nanoparticulate and Ionic Titanium Antigens for Hypersensitivity Testing

Titanium is used in a wide variety of materials ranging from medical devices to materials used in everyday life. Adverse biological reactions that could occur in patients, consumers, and workers should be monitored and prevented. There is a lack of available agents to test and predict titanium-related hypersensitivity. The aim of this study was to develop two bioavailable titanium substances in ionic and nanoparticulate form to serve as antigens for hypersensitivity testing in vitro. Peripheral blood mononuclear cells from 20 test subjects were stimulated with the antigens and secretion of monocytic and lymphatic cytokines and chemokines were measured by a multiplex bead assay. Lymphocyte stimulation indices were also determined in a subset of test subjects by measuring CD69 and HLA-DR expression by flow cytometry. Cytokine profiling revealed that both antigens increased production of typical monocyte and macrophage secreted cytokines after 24 h, with significant increases in IL-1β, IL-7, IL-10, IL-12, IL-2R, IL-6, GM-CSF, TNF-α, IL-1RA, MIP-1α, MIP-1β, IFN-α, and IL-15. Lymphatic cytokines and chemokines were not significantly induced by activation. After seven days of stimulation, ionic-Ti (2.5 μg/mL) caused proliferation (stimulation index > 2) of CD4+ cells and CD8+ cells in all persons tested (N = 6), while titanium dioxide nanoparticles (50 μg/mL) only caused significant proliferation of CD4+ cells. Our preliminary results show that the experimental titanium antigens, especially the ionic form, induce a general inflammatory response in vitro. A relevant cohort of test subjects is required to further elucidate their potential for predictive hypersensitivity testing.

Short-Term Pulmonary Toxicity Assessment of Pre- and Post-incinerated Organomodified Nanoclay in Mice

Organomodified nanoclays (ONCs) are increasingly used as filler materials to improve nanocomposite strength, wettability, flammability, and durability. However, pulmonary risks associated with exposure along their chemical lifecycle are unknown. This study's objective was to compare pre- and post-incinerated forms of uncoated and organomodified nanoclays for potential pulmonary inflammation, toxicity, and systemic blood response. Mice were exposed via aspiration to low (30 μg) and high (300 μg) doses of preincinerated uncoated montmorillonite nanoclay (CloisNa), ONC (Clois30B), their respective incinerated forms (I-CloisNa and I-Clois30B), and crystalline silica (CS). Lung and blood tissues were collected at days 1, 7, and 28 to compare toxicity and inflammation indices. Well-dispersed CloisNa caused a robust inflammatory response characterized by neutrophils, macrophages, and particle-laden granulomas. Alternatively, Clois30B, I-Clois30B, and CS high-dose exposures elicited a low grade, persistent inflammatory response. High-dose Clois30B exposure exhibited moderate increases in lung damage markers and a delayed macrophage recruitment cytokine signature peaking at day 7 followed by a fibrotic tissue signature at day 28, similar to CloisNa. I-CloisNa exhibited acute, transient inflammation with quick recovery. Conversely, high-dose I-Clois30B caused a weak initial inflammatory signal but showed comparable pro-inflammatory signaling to CS at day 28. The data demonstrate that ONC pulmonary toxicity and inflammatory potential relies on coating presence and incineration status in that coated and incinerated nanoclay exhibited less inflammation and granuloma formation than pristine montmorillonite. High doses of both pre- and post-incinerated ONC, with different surface morphologies, may harbor potential pulmonary health hazards over long-term occupational exposures.

Exposure assessments for a cross-sectional epidemiologic study of US carbon nanotube and nanofiber workers

BACKGROUND

Recent animal studies have suggested the potential for wide-ranging health effects resulting from exposure to carbon nanotubes and nanofibers (CNT/F). To date, no studies in the US have directly examined the relationship between occupational exposure and potential human health effects.

OBJECTIVES

Our goal was to measure CNT/F exposures among US workers with representative job types, from non-exposed to highly exposed, for an epidemiologic study relating exposure to early biologic effects.

METHODS

108 participants were enrolled from 12 facilities across the US. Personal, full-shift exposures were assessed based on the mass of elemental carbon (EC) at the respirable and inhalable aerosol particle size fractions, along with quantitatively characterizing CNT/F and estimating particle size via transmission electron microscopy (TEM). Additionally, sputum and dermal samples were collected and analyzed to determine internal exposures and exposures to the hands/wrists.

RESULTS

The mean exposure to EC was 1.00 μg/m³ at the respirable size fraction and 6.22 μg/m³ at the inhalable fraction. Analysis by TEM found a mean exposure of 0.1275 CNT/F structures/cm³, generally to agglomerated materials between 2 and 10 μm. Internal exposures to CNT/F via sputum analysis were confirmed in 18% of participants while ∼70% had positive dermal exposures.

CONCLUSIONS

We demonstrated the occurrence of a broad range of exposures to CNT/F within 12 facilities across the US. Analysis of collected sputum indicated internal exposures are currently occurring within the workplace. This is an important first step in determining if exposures in the workforce have any acute or lasting health effects.

Characterizing workforces exposed to current and emerging non-carbonaceous nanomaterials in the U.S

OBJECTIVE

Toxicology studies suggest that exposure to certain types of engineered nanomaterials (ENMs) may cause adverse health effects, but little is known about the workforce in the United States that produces or uses these materials. In addition, occupational exposure control strategies in this industry are not well characterized. This study identified U.S. ENM manufacturers and users (other than carbon nanotubes and nanofibers, which have been characterized elsewhere), determined workforce size, characterized types and quantities of materials used, occupational exposure control strategies, and the feasibility of occupational ENM exposure studies.

METHODS

Eligible companies were identified and information was collected through phone surveys on nanomaterials produced or used, workforce size, location, work practices, and exposure control strategies. The companies were classified into groups for additional examinations.

RESULTS

Forty-nine companies producing or using ENMs in the U.S. were identified. These companies employed at least 1,500 workers. Most companies produced or used some form of nanoscale metal. More than half of the eligible companies were suppliers for the coatings, composite materials, or general industries. Each company provided information about worker exposure reduction strategies through engineering controls, administrative controls, or personal protective equipment. Production-scale companies reported greater use of specific exposure control strategies for ENMs than laboratory-scale companies.

CONCLUSIONS

Workplaces producing or using ENMs report using engineering and administrative controls as well as personal protective equipment to control worker exposure. Industrywide exposure assessment studies appear feasible due to workforce size. However, more effort must be taken to target industries using specific ENMs based on known toxicological effects and health risks.

Single Silver Nanoparticle Instillation Induced Early and Persisting Moderate Cortical Damage in Rat Kidneys

The potential toxic effects of silver nanoparticles (AgNPs), administered by a single intratracheal instillation (i.t), was assessed in a rat model using commercial physico-chemical characterized nanosilver. Histopathological changes, overall toxic response and oxidative stress (kidney and plasma protein carbonylation), paralleled by ultrastructural observations (TEM), were evaluated to examine renal responses 7 and 28 days after i.t. application of a low AgNP dose (50 µg/rat), compared to an equivalent dose of ionic silver (7 µg AgNO₃/rat). The AgNPs caused moderate renal histopathological and ultrastructural alteration, in a region-specific manner, being the cortex the most affected area. Notably, the bulk AgNO₃, caused similar adverse effects with a slightly more marked extent, also triggering apoptotic phenomena. Specifically, 7 days after exposure to both AgNPs and AgNO₃, dilatation of the intercapillary and peripheral Bowman’s space was observed, together with glomerular shrinkage. At day 28, these effects still persisted after both treatments, accompanied by an additional injury involving the vascular component of the mesangium, with interstitial micro-hemorrhages. Neither AgNPs nor AgNO₃ induced oxidative stress effects in kidneys and plasma, at either time point. The AgNP-induced moderate renal effects indicate that, despite their benefits, novel AgNPs employed in consumer products need exhaustive investigation to ensure public health safety.

The Effectiveness of Specific Risk Mitigation Techniques Used in the Production and Handling of Manufactured Nanomaterials: A Systematic Review

Many kinds of manufactured nanomaterials (MNMs) have been developed and used as basic materials of industrial products, and they may pose health risks for workers in not only developed countries but also in developing countries. Few studies have looked at the evidence for effects of controls that mitigate the risk of exposure to MNMs. Therefore, we systematically searched the literature from the year 2000 to 2015. We included studies that compared the use of an exposure control to the situation without such a technique and those that measured the exposure to MNMs as the outcome. In order to evaluate the effectiveness of these controls, we used their "protection factor", defined as the ratio between concentrations without and with the control. We located 1,131 references in PubMed and other lists, and out of these references, 41 studies fulfilled our inclusion criteria. We categorized them as engineering controls such as enclosure, local exhaust ventilation or process automation, and as personal protective equipment (PPE). For enclosure systems we found a protection factor beyond 100. For other engineering controls, the better controls scored 10 to 20, but many cases of local exhaust ventilation had a protection factor of less than 10 and some cases even increased exposure. PPE such as N95 or equivalent filtering respirators had a protection factor of approximately 10 tested with nano-sized aerosols. We conclude that there is low quality evidence that specific engineering controls can reduce exposure to MNMs but that enclosure is considerably more effective. For respiratory protection the evidence is of very low quality due to the lack of field studies. This information can be used to decide about controls when exposure to MNMs exceeds proposed occupational exposure limits or when no toxicological information is available for a MNM.

Neurotoxic effect of active ingredients in sunscreen products, a contemporary review

Sunscreen application is the main strategy used to prevent the maladies inflicted by ultraviolet (UV) radiation. Despite the continuously increasing frequency of sunscreen use worldwide, the prevalence of certain sun exposure-related pathologies, mainly malignant melanoma, is also on the rise. In the past century, a variety of protective agents against UV exposure have been developed. Physical filters scatter and reflect UV rays and chemical filters absorb those rays. Alongside the evidence for increasing levels of these agents in the environment, which leads to indirect exposure of wildlife and humans, recent studies suggest a toxicological nature for some of these agents. Reviews on the role of these agents in developmental and endocrine impairments (both pathology and related mechanisms) are based on both animal and human studies, yet information regarding the potential neurotoxicity of these agents is scant. In this review, data regarding the neurotoxicity of several organic filters: octyl methoxycinnamate, benzophenone-3 and −4, 4-methylbenzylidene camphor, 3-benzylidene camphor and octocrylene, and two allowed inorganic filters: zinc oxide and titanium dioxide, is presented and discussed. Taken together, this review advocates revisiting the current safety and regulation of specific sunscreens and investing in alternative UV protection technologies.