OUP accepted manuscript

Effective and green in-situ remediation strategies based on TEMPO-nanocellulose/lignin/MIL-100(Fe) hydrogel nanocomposite adsorbent for lead and copper in agricultural soils

Hydrogel adsorbents are promising tools for reducing heavy metals' bioavailability in contaminated soil. However, their practical feasibility remains limited by the low stability, inefficient removal efficiency, and potential secondary pollution. Optimizing the adsorption operation and the functional properties of hydrogel adsorbents could eliminate this method's drawbacks. Herein, three innovative in-situ remediation strategies for Pb/Cu-contaminated soil were adopted based on the concept of novel TEMPO-cellulose (TO-NFCs)/lignin/acrylamide@MIL-100(Fe) nanocomposite hydrogel adsorbent (NCLMH). Characteristic analyses revealed ideal Pb/Cu adsorption mechanisms by swelling, complexation, electrical attraction, and ion exchange via carboxyl/hydroxyl/carbonyl groups and unsaturated Fe(III) sites on ANCMH besides FeOOH formation. The highest maximum theoretical adsorption capacities of Pb(II) and Cu(II) on ANCMH were 416.39 and 133.98 mg/g, under pH 6.5, governed by pseudo-second-order/Freundlich models. Greenhouse pot experiments with contaminated soils amended with two-depth layers of 0.5% NCLMHs (SA@NCLMH) displayed a decline in Pb and Cu bioavailability up to 85.9% and 74.5% within 45 d. Soil column studies simulating continuous water soil flushing coupled with NCLMH layers, instead of conventional extractant fluids, and connected to NCLMH-sand column as purification unit (CF@NCLMH) achieved higher removal rates for Pb, and Cu of 89.5% and 77.2% within 24 h. Alternatively, conducting multiple-pulse soil flushing mode (MF@NCLMH) gained the highest Pb and Cu removal of 96.5% and 85.4%, as the water flushing-stop flux events allowed adequate water movement/residence period, promoting Pb/Cu desorption-adsorption from soil to NCLMH. Also, the NCLMH-sand column conducting and easy separation of the stable/reusable NCLMHs prevented the potential secondary pollution. Interestingly, the three remediated soils reached the corresponding regulation of the permissible limits for Pb and Cu residential scenarios in medium-to-heavily agricultural polluted soils, alleviating the Pb/Cu bioaccumulation and phytotoxicity symptoms in cultivated wheat, especially after MF@NCLMH treatment. This study introduces promising alternative remediation strategies with high sustainability and feasibility in acidic-to-neutral heavy metal-contaminated agricultural soil.

Recent advances and applications of stimuli-responsive nanomaterials for water treatment: A comprehensive review

The development of stimuli-responsive nanomaterials holds immense promise for enhancing the efficiency and effectiveness of water treatment processes. These smart materials exhibit a remarkable ability to respond to specific external stimuli, such as light, pH, or magnetic fields, and trigger the controlled release of encapsulated pollutants. By precisely regulating the release kinetics, these nanomaterials can effectively target and eliminate contaminants without compromising the integrity of the water system. This review article provides a comprehensive overview of the advancements in light-activated and pH-sensitive nanomaterials for controlled pollutant release in water treatment. It delves into the fundamental principles underlying these materials' stimuli-responsive behaviour, exploring the design strategies and applications in various water treatment scenarios. In particular, the article indicates how integrating stimuli-responsive nanomaterials into existing water treatment technologies can significantly enhance their performance, leading to more sustainable and cost-effective solutions. The synergy between these advanced materials and traditional treatment methods could pave the way for innovative approaches to water purification, offering enhanced selectivity and efficiency. Furthermore, the review highlights the critical challenges and future directions in this rapidly evolving field, emphasizing the need for further research and development to fully realize the potential of these materials in addressing the pressing challenges of water purification.

Soil and water pollution and cardiovascular disease

Healthy, uncontaminated soils and clean water support all life on Earth and are essential for human health. Chemical pollution of soil, water, air and food is a major environmental threat, leading to an estimated 9 million premature deaths worldwide. The Global Burden of Disease study estimated that pollution was responsible for 5.5 million deaths related to cardiovascular disease (CVD) in 2019. Robust evidence has linked multiple pollutants, including heavy metals, pesticides, dioxins and toxic synthetic chemicals, with increased risk of CVD, and some reports suggest an association between microplastic and nanoplastic particles and CVD. Pollutants in soil diminish its capacity to produce food, leading to crop impurities, malnutrition and disease, and they can seep into rivers, worsening water pollution. Deforestation, wildfires and climate change exacerbate pollution by triggering soil erosion and releasing sequestered pollutants into the air and water. Despite their varied chemical makeup, pollutants induce CVD through common pathophysiological mechanisms involving oxidative stress and inflammation. In this Review, we provide an overview of the relationship between soil and water pollution and human health and pathology, and discuss the prevalence of soil and water pollutants and how they contribute to adverse health effects, focusing on CVD.

Triple planetary crisis: why healthcare professionals should care

Humanity currently faces an ecological crisis with devastating consequences to all living species. While climate change is estimated to lead to 250,000 extra deaths per year between 2030 and 2050, pollution is known to cause 9 million premature deaths: a figure much greater than the deaths caused by AIDS, tuberculosis and malaria combined. The healthcare sector is both burdened by, and contributes to, the impact of climate change and environmental degradation. Amidst glaring evidence of the interdependence of human health and the eco system, there is an urgent call for healthcare professionals to concern themselves with the triple planetary threat humanity currently faces. Without immediate mitigative measures, the future seems uncertain. Some healthcare systems at local, national and global levels have taken numerous initiatives to address, mitigate and adapt to these changes, however, these are not sufficient. A lack of awareness among healthcare professionals of the ecological crisis, its interconnectedness, and the role of healthcare in it, plays a significant role in the lack responsibility of healthcare professionals in this space. Therefore, this paper presents a discussion of the current landscape of the triple threat of climate change, loss of biodiversity, and pollution, while emphasising the contribution of healthcare professionals to it. Furthermore, interrelated concepts such as planetary health and eco-anxiety are briefly discussed. This perspective paper also presents several key prospective research areas that may lay the foundation for motivating healthcare professionals to play an active role in preventing and mitigating the ecological crises humanity currently faces.

Environmental remediation of emerging contaminants using subcritical water: A review

The continuous rise of emerging contaminants (ECs) in the environment has been a growing concern due to their potentially harmful effects on humans, animals, plants, and aquatic life, even at low concentrations. ECs include human and veterinary pharmaceuticals, hormones, personal care products, pesticides, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), organic dyes, heavy metals (HMs), and others. The world's growing population contributes to the release of many kinds of chemicals into the environment, which is estimated to be more than 200 billion metric tons annually and results in over 9 million deaths. The removal of these contaminants using conventional physical, chemical, and biological treatments has proven to be ineffective, highlighting the need for simple, effective, inexpesive, practical, and eco-friendly alternatives. Thus, this article discusses the utilization of subcritical water oxidation (SBWO) and subcritical water extraction (SBWE) techniques to remove ECS from the environment. Subcritical water (water below the critical temperature of 374.15 °C and critical pressure of 22.1 Mpa) has emerged as one of the most promising methods for remediation of ECs from the environment due to its non-toxic properties, simplicity and efficiency of application. Furthermore, the impact of temperature, pressure, treatment time, and utilization of chelating agents, organic modifiers, and oxidizing agents in the static and dynamic modes was investigated to establish the best conditions for high ECs removal efficiencies.

Health impact assessment of the surface water pollution in China

China suffers from severe surface water pollution. Health impact assessment could provide a novel and quantifiable metric for the health burden attributed to surface water pollution. This study establishes a health impact assessment method for surface water pollution based on classic frameworks, integrating the multi-pollutant city water quality index (CWQI), informative epidemiological findings, and benchmark public health information. A relative risk level assignment approach is proposed based on the CWQI, innovatively addressing the challenge in surface water-human exposure risk assessment. A case study assesses the surface water pollution-related health impact in 336 Chinese cities. The results show (1) between 2015 and 2022, total health impact decreased from 3980.42 thousand disability-adjusted life years (DALYs) (95 % Confidence Interval: 3242.67-4339.29) to 3260.10 thousand DALYs (95 % CI: 2475.88-3641.35), measured by total cancer. (2) The annual average health impacts of oesophageal, stomach, colorectal, gallbladder, and pancreatic cancers added up to 2621.20 thousand DALYs (95 % CI: 2095.58-3091.10), revealing the significant health impact of surface water pollution on digestive cancer. (3) In 2022, health impacts in the Beijing-Tianjin-Hebei and surroundings, the Yangtze River Delta, and the middle reaches of the Yangtze River added up to 1893.06 thousand DALYs (95 % CI: 1471.82-2097.88), showing a regional aggregating trend. (4) Surface water pollution control has been the primary driving factor to health impact improvement, contributing -3.49 % to the health impact change from 2015 to 2022. It is the first city-level health impact map for China's surface water pollution. The methods and findings will support the water management policymaking in China and other countries suffering from water pollution.

The impact of water pollution on the health of older people

Water pollution exerts a negative impact on the health of both women and men, inducing hormonal changes, accelerating aging, and consequently leading to the premature onset of age-related health problems. Water pollutants can in general be classified as chemical (both organic and inorganic), physical, and biological agents. Certain chemical pollutants have been found to disrupt hormonal balance by blocking, mimicking, or disrupting functions within the intricate homeostasis of the human body. Moreover, certain water pollutants, including specific pesticides and industrial chemicals, have been associated with neurological and psychiatric disorders, such as mood swings, depression, cognitive decline, and anxiety, impacting both women and men. Water pollution is also associated with physical ailments, such as diarrhea, skin diseases, malnutrition, and cancer. Exposure to specific pollutants may promote premature menopause and vasomotor symptoms, elevate the risk of cardiovascular disease, and reduce bone density. In men, exposure to water pollution has been shown to reduce LH, FSH, and testosterone serum levels. The oxidative stress induced by pollutants prompts apoptosis of Sertoli and germ cells, inhibiting spermatogenesis and altering the normal morphology and concentration of sperm. Environmental estrogens further contribute to reduced sperm counts, reproductive system disruptions, and the feminization of male traits. Studies affirm that men generally exhibit a lower susceptibility than women to hormonal changes and health issues attributed to water pollutants. This discrepancy may be attributed to the varied water-related activities which have traditionally been undertaken by women, as well as differences in immune responses between genders. The implementation of effective measures to control water pollution and interventions aimed at safeguarding and enhancing the well-being of the aging population is imperative. The improvement of drinking water quality has emerged as a potential public health effort with the capacity to curtail the onset of cognitive impairment and dementia in an aging population.

Clay-polymer nanocomposites for effective water treatment: opportunities, challenges, and future prospects

The metal intoxication and its associated adverse effects to humans have led to the research for development of water treatment technologies from pollution hazards. Therefore, development of cheaper water remediation technologies is more urgent than ever. Clays and clay minerals are naturally occurring, inexpensive, non-toxic materials possessing interesting chemical and physical properties. As a result of interesting surface properties, these have been developed as efficient absorbent in water remediation. Recently, clay-polymer nanocomposites have provided a cost-effective technological platform for removing contaminants from water. Covering research advancements from past 25 years, this review highlights the developments in clay-polymer nanocomposites and their advanced technical applications are evaluated with respect to the background and issues in remediation of toxic metals and organic compounds from water. The extensive analysis of literature survey of more than two decades suggests that future work need to highlight on advancement of green and cost-effective technologies. The development of understanding of the interaction and exchange between toxin and clay-polymer composites would provide new assembly methods of nanocomposites with functional molecules or nanomaterials need to be extended to increase the detection and extraction limit to parts per trillion.

Review of carbon dot-hydrogel composite material as a future water-environmental regulator

As water pollution and scarcity pose severe threats to the sustainable progress of human society, it is important to develop a method or materials that can accurately and efficiently detect pollutants and purify aquatic environments or exploit marine resources. The compositing of photoluminescent and hydrophilic carbon dots (CDs) with hydrogels bearing three-dimensional networks to form CD-hydrogel composites to protect aquatic environments is a "win-win" strategy. Herein, the feasibility of the aforementioned method has been demonstrated. This paper reviews the recent progress of CD-hydrogel materials used in aquatic environments. First, the synthesis methods for these composites are discussed, and then, the composites are categorized according to different methods of combining the raw materials. Thereafter, the progress in research on CD-hydrogel materials in the field of water quality detection and purification is reviewed in terms of the application of the mechanisms. Finally, the current challenges and prospects of CD-hydrogel materials are described. These results are expected to provide insights into the development of CD-hydrogel composites for researchers in this field.

Epidemiology, Mechanisms and Prevention in the Etiology of Environmental Factor-Induced Cardiovascular Diseases

Cardiovascular diseases are a significant cause of mortality worldwide, and their prevalence can be amplified by a range of environmental factors. This review article critically evaluated the published information on the epidemiology and pathophysiological mechanisms of various environmental factors such as air indoor and outdoor air pollution, water pollution, climate change, and soil pollution. Preventative measures to mitigate these effects including public health responses are discussed with gaps in our knowledge for future studies.

Determination of threshold values and heavy metal pollution assessment of soils in an industrial area in Ghana

Industrial activities have the potential to pollute soils with a wide variety of heavy metals (HMs). In Ghana, however, assessment of HM pollution of soils in industrial areas remains limited. Accordingly, HM soil pollution in one of the industrial areas in Accra, Ghana was assessed. Soil samples were taken and analysed for HMs, including Fe, Zr, Zn, Ti, Sr, Rb, Mn, Pb, Cu, and Co, using X-Ray Fluorescence (XRF). HM geochemical threshold values (GTVs) were determined to establish soil HM pollution levels and identify areas needing remediation. Furthermore, risk assessments were conducted to evaluate the potential ecological and human health risks associated with these metals. The mean concentrations of Fe, Zn, Rb, Sr, Zr, Ti, Mn, Co, Cu, and Pb in the soils were: 27133.83, 147.72, 16.30, 95.95, 307.11, 4663.66, 289.85, 418.54, 44.97, and 112.88 mg/kg, respectively. Generally, the concentrations of HMs decreased with depth, although some lower layers exhibited elevated HM levels. Soil pollution levels were categorized as low for Fe, Rb, Zr, Ti, Mn, Co, and Cu; moderate for Sr and Zn; and considerable for Pb. Notably, the northwestern part of the study area displayed a considerable to very high degree of HM contamination. While HMs in the soils posed low ecological risk, the human health risk assessment indicated potential health effects from Co, particularly in children. The presence of HMs in the soils was noted to originate from both natural geological phenomena and human activities, including industrial operations, agricultural practices, landfill activities, and vehicular emissions.

A review of common statistical methods for dealing with multiple pollutant mixtures and multiple exposures

Traditional environmental epidemiology has consistently focused on studying the impact of single exposures on specific health outcomes, considering concurrent exposures as variables to be controlled. However, with the continuous changes in environment, humans are increasingly facing more complex exposures to multi-pollutant mixtures. In this context, accurately assessing the impact of multi-pollutant mixtures on health has become a central concern in current environmental research. Simultaneously, the continuous development and optimization of statistical methods offer robust support for handling large datasets, strengthening the capability to conduct in-depth research on the effects of multiple exposures on health. In order to examine complicated exposure mixtures, we introduce commonly used statistical methods and their developments, such as weighted quantile sum, bayesian kernel machine regression, toxic equivalency analysis, and others. Delineating their applications, advantages, weaknesses, and interpretability of results. It also provides guidance for researchers involved in studying multi-pollutant mixtures, aiding them in selecting appropriate statistical methods and utilizing R software for more accurate and comprehensive assessments of the impact of multi-pollutant mixtures on human health.

A combined landfarming-phytoremediation method to enhance remediation of mixed persistent contaminants

Contamination of soil and water with petroleum hydrocarbons and metals can pose a significant threat to the environment and human health. This study aimed to investigate the establishment and growth of tall fescue and agropyron in two petroleum-contaminated soils (soil S1 and soil S2) with previous landfarming treatments, and to assess the phytoremediation potential for heavy metal removal from these polluted soils. The results showed that the presence of petroleum hydrocarbons significantly (P < 0.05) reduced plant growth, but plant development was facilitated in soils with prior landfarming treatments. Urease activity in the rhizosphere of agropyron for soil S1 was about 47% higher than the unplanted control soil. The rhizosphere of agropyron and tall fescue eliminated more than 40% and 20% of total hydrocarbon amounts in soil S1, respectively, compared to the unplanted soil. Moreover, the plants grown in the landfarming treatment exhibited higher concentrations of metals (Fe, Zn, Mn, Cu, and Ni) than the control. Based on the findings, the combination of landfarming and phytoremediation techniques can provide an optimal solution for removing mixed pollutants, including petroleum hydrocarbons and metals, from the environment.

Highly Selective Pb(II) Adsorption by DTPA-Functionalized Graphene Oxide/Carboxymethyl Cellulose Aerogel

Graphene oxide (GO) exhibits a strong adsorption capacity for the removal of heavy metal ions from liquids, making it a topic of increasing interest among researchers. However, a significant challenge persists in the preparation of graphene oxide-based adsorbents that possess both high structural stability and excellent adsorption capacity. In this paper, a green and environmentally friendly ternary composite aerogel based on graphene was successfully synthesized. The adsorption capacity of graphene oxide was enhanced through diethylenetriaminepentaacetic acid modification, while the incorporation of composite carboxymethyl cellulose improved the structural stability of the composite aerogel in liquid. The composite aerogel demonstrates robust interactions between its components and features a multiscale porous structure. Adsorption tests conducted with Pb(II) revealed that the GO/DTPA/CMC (GDC) composite aerogel exhibits a favorable adsorption capacity. The study of adsorption kinetics and isotherms indicated that the adsorption process follows the quasi-secondary adsorption model and Freundlich adsorption model, suggesting a chemical multilayer adsorption mechanism, and the maximum adsorption capacity for Pb(II) ions was 521.917 mg/g based on the quasi-quadratic kinetic model fitting. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) analyses, performed before and after adsorption, confirmed that the adsorption of Pb(II) primarily occurs through chelation, complexation, proton exchange, and electrostatic interactions between ions and active sites such as hydroxyl and carboxyl groups. This study presents an innovative strategy for simultaneously enhancing the adsorption properties of graphene oxide-based composite aerogels and ensuring solution stability.

The synergistic potential of biochar and nanoparticles in phytoremediation and enhancing cadmium tolerance in plants

Cadmium (Cd) is classified as a heavy metal (HM) and is found into the environment through both natural processes and intensified anthropogenic activities such as industrial operations, mining, disposal of metal-laden waste like batteries, as well as sludge disposal, excessive fertilizer application, and Cd-related product usage. This rising Cd disposal into the environment carries substantial risks to the food chain and human well-being. Inadequate regulatory measures have led to Cd bio-accumulation in plants, which is increasing in an alarming rate and further jeopardizing higher trophic organisms, including humans. In response, an effective Cd decontamination strategy such as phytoremediation emerges as a potent solution, with innovations in nanotechnology like biochar (BC) and nanoparticles (NPs) further augmenting its effectiveness for Cd phytoremediation. BC, derived from biomass pyrolysis, and a variety of NPs, both natural and less toxic, actively engage in Cd removal during phytoremediation, mitigating plant toxicity and associated hazards. This review scrutinizes the application of BC and NPs in Cd phytoremediation, assessing their synergistic mechanism in influencing plant growth, genetic regulations, structural transformations, and phytohormone dynamics. Additionally, the review also underscores the adoption of this sustainable and environmentally friendly strategies for future research in employing BC-NP microaggregates to ameliorate Cd phytoremediation from soil, thereby curbing ecological damage due to Cd toxicity.

Low-density polyethylene enhances the disturbance of microbiome and antibiotic resistance genes transfer in soil-earthworm system induced by pyraclostrobin

Non-antibiotic chemicals in farmlands, including microplastics (MPs) and pesticides, have the potential to influence the soil microbiome and the dissemination of antibiotic resistance genes (ARGs). Despite this, there is limited understanding of the combined effects of MPs and pesticides on microbial communities and ARGs transmission in soil ecosystems. In this study, we observed that low-density polyethylene (LDPE) microplastic enhance the accumulation of pyraclostrobin in earthworms, resulting in reduced weight and causing severe oxidative damage. Analysis of 16 S rRNA amplification revealed that exposure to pyraclostrobin and/or LDPE disrupts the microbial community structure at the phylum and genus levels, leading to reduced alpha diversity in both the soil and earthworm gut. Furthermore, co-exposure to LDPE and pyraclostrobin increased the relative abundance of ARGs in the soil and earthworm gut by 2.15 and 1.34 times, respectively, compared to exposure to pyraclostrobin alone. It correlated well with the increasing relative abundance of genera carrying ARGs. Our findings contribute novel insights into the impact of co-exposure to MPs and pesticides on soil and earthworm microbiomes, highlighting their role in promoting the transfer of ARGs. This knowledge is crucial for managing the risk associated with the dissemination of ARGs in soil ecosystems.

SscA is required for fungal development, aflatoxin production, and pathogenicity in Aspergillus flavus

Fungal spores are specialized dormant cells that act as primary reproductive biological particles and exhibit strong viability under extremely harsh conditions. They contaminate a variety of crops and foods, causing severe health hazards to humans and animals. Previous studies demonstrated that a spore-specific transcription factor SscA plays pivotal roles in the conidiogenesis of the model organism Aspergillus nidulans. In this study, we investigated the biological and genetic functions of SscA in the aflatoxin-producing fungus A. flavus. Deletion of sscA showed reduced conidia formation, lost long-term viability, and exhibited more sensitivity to thermal, oxidative, and radiative stresses. The sscA-deficient strain showed increased aflatoxin B1 production in conidia as well as mycelia. Importantly, the absence of sscA affected fungal pathogenicity on crops. Further transcriptomic and phenotypic studies suggested that SscA coordinates conidial wall structures. Overall, SscA is important for conidial formation, maturation and dormancy, mycotoxin production, and pathogenicity in A. flavus.

Household unclean fuel use, indoor pollution and self-rated health: risk assessment of environmental pollution caused by energy poverty from a public health perspective

The lack of access to clean energy remains one of the major challenges in the global energy sector. Access to clean, sustainable and affordable energy, outlined in the seventh Sustainable Development Goals (SDG 7) of the United Nations, plays a crucial role in advancing health (SDG 3), as unclean cooking energy may endanger people's health by causing air pollution. However, due to endogeneity problems such as reverse causality, the health consequences of environmental pollution caused by unclean fuel usage are difficult to be scientifically and accurately evaluated. This paper aims to systematically assess the health cost of unclean fuel usage based on tackling endogeneity, using the data from Chinese General Social Survey. The ordinary least squares model, ordered regression methods, instrumental variable approach, penalized machine learning methods, placebo test, and mediation models are applied in this research. Analytical results demonstrate that households' unclean fuel use significantly damages people's health. Specifically, the use of dirty fuel leads to an average of about a one-standard-deviation decline in self-rated health, demonstrating its notable negative effect. The findings are robust to a series of robustness and endogeneity tests. The impact mechanism is that unclean fuel usage reduces people's self-rated health through increasing indoor pollution. Meanwhile, the negative effect of dirty fuel use on health has significant heterogeneity among different subgroups. The consequences are more prominent for the vulnerable groups who are female, younger, living in rural areas and older buildings, with lower socio-economic status and uncovered by social security. Therefore, necessary measures should be taken to improve energy infrastructure to make clean cooking energy more affordable and accessible as well as to enhance people's health. Besides, more attention should be paid to the energy needs of the above specific vulnerable groups faced with energy poverty.

Sustainable development of environmental protection talents training: Research on the behavior decision of government, university and enterprise under the background of evolutionary game

Environmental protection talents training (EPTT) is recognized as a key prerequisite for maintaining environmental sustainability, and in order to study the influence of each player on EPTT. This paper innovatively constructs a tripartite evolutionary game model of government, university and enterprise. The equilibrium points and evolutionary stabilization strategies of each participant are solved by replicating the dynamic equations, and the behaviors of each subject in EPTT are analyzed so as to clarify the behavioral characteristics and optimal strategies of the government's participation in EPTT. The results show that enterprises occupy a more important position in influencing government decisions. The government should reduce the financial incentives for enterprises and replace them with greater policy support. Meanwhile, the government should actively promote the cultivation mechanism that integrates universities and enterprises. The results of the study can provide a decision-making basis for the government to promote the sustainable development of EPTT.

Recent developments and prospects of sustainable remediation treatments for major contaminants in soil: A review

Rapid industrialisation and urbanisation are contributing to the entry of emerging contaminants into the environment, posing a significant threat to soil health and quality. Therefore, several remediation technologies have been investigated and tested at a field scale to address the issue. However, these remediation technologies face challenges related to cost-effectiveness, environmental concerns, secondary pollution due to the generation of by-products, long-term pollution leaching risks, and social acceptance. Overcoming these constraints necessitates the implementation of sustainable remediation methodologies that prioritise approaches with minimal environmental ramifications and the most substantial net social and economic advantages. Hence, this review delves into diverse contaminants that threaten soil health and quality. Moreover, it outlines the research imperatives for advancing innovative remediation techniques and effective management strategies to tackle this concern. The review discusses a remediation treatment train approach that encourages resource recovery, strengthens the circular economy, and employs a Life Cycle Assessment (LCA) framework to assess the environmental impacts of different remediation strategies. Additionally, the study explores mechanisms to integrate sustainability principles into soil remediation practices. It underscores the necessity for a comprehensive and systematic approach that takes into account the economic, social, and environmental consequences of remediation methodologies in the development of sustainable solutions.

Comprehensive effects of thiamethoxam from contaminated soil on lettuce growth and metabolism

The second-generation neonicotinoid thiamethoxam, is prevalent in soils because of its extensive application and persistence. However, the comprehensive effects of thiamethoxam residue in soils on cultivated plants are still poorly understood. This study examined variations of growth state, physiological parameters, antioxidant activity, and metabolites in lettuce after thiamethoxam exposure; the removal effects of different washing procedures were also investigated. The results indicated that thiamethoxam in soils significantly increased the fresh weight, seedling height and chlorophyll content in lettuce, and also altered its lipid, carbohydrate, nucleotide and amino acids composition based on untargeted metabolomics. KEGG pathway analysis uncovered a disruption of lipid pathways in lettuce exposed to both low and high concentrations of thiamethoxam treatments. In addition, the terminal residues of thiamethoxam in lettuce were below the corresponding maximum residue limits stipulated for China. The thiamethoxam removal rates achieved by common washing procedures in lettuce ranged from 26.9% to 42.6%. This study thus promotes the understanding of the potential food safety risk caused by residual thiamethoxam in soils.

Electrochemical nitrate reduction over bimetallic Pd-Sn nanocatalysts with tunable selectivity toward benign nitrogen

Nitrate is recognized as a highly impactful water contaminant among various pollutants in water. To address the ever-growing demand for water purification, this work investigates the bimetallic palladium (Pd) and tin (Sn) catalysts, which are electrochemically deposited on stainless steel mesh support (Pd-Sn/SS) for the selective conversion of harmful nitrate (NO3-) into benign nitrogen (N2) gas. Results indicate that the bimetallic composition in Pd-Sn/SS electrodes substantially influenced the reaction route for nitrate reduction as well as the performance of nitrate transformation and nitrogen selectivity. It is found that the electrode prepared from Pd:Sn = 1:1 (mole ratio) demonstrates an outstanding nitrate conversion of 95%, nitrogen selectivity of 88%, and nitrogen yield of 82%, which outperform many reported values in the literature. The electrochemically synthesized bimetallic electrode proposed herein enables a new insight for promoting the reactivity and selectivity of nitrate reduction in water.

Surface modification of chitin nanofibers with dopamine as efficient nanosorbents for enhanced removal of dye pollution and metal ions

The development of environmentally friendly and low-cost adsorbents with high adsorption capacity remains a challenge. Herein, chitin nanofiber-polydopamine composite materials (CNDA) have been obtained by surface modification of chitin nanofiber using dopamine. According to the results of transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier Transform Infrared Spectrometer (FTIR), and X-ray photoelectron spectrometer (XPS), polydopamine have been successfully coated on the surface of chitin nanofiber (ChNF). The ability to remove methylene blue (MB) has been analyzed via standard adsorption experiments, indicating that the maximum adsorption capacity (qmax) can reach 196.6 mg/g at MB initial concentration of 50 mg/L. Most importantly, the adsorption kinetics, isotherm, and thermodynamics were used to investigate the MB adsorption mechanism on composites. This indicated that the polydopamine on the surface of chitin nanofiber (ChNF) plays an important role in the MB dye adsorption. Moreover, the removal ability of CNDA to metal ions has also been investigated, indicating high capacities for Fe3+, Mn2+, Cu2+, and Ni2+. Based on their biodegradability and good adsorption capacity, the CNDA composite material can be considered a promising adsorbent for wastewater treatment.

Microbial Removal of Heavy Metals from Contaminated Environments Using Metal-Resistant Indigenous Strains

Contamination of soil with heavy metals has become a matter of global importance due to its impact on agriculture, environmental integrity, and therefore human health and safety. Several microbial strains isolated from soil contaminated by long-term chemical and petrochemical activities were found to manifest various levels of tolerance to Cr, Pb, and Zn, out of which Bacillus marisflavi and Trichoderma longibrachiatum exhibited above-moderate tolerance. The concentrations of target heavy metals before and after bioremediation were determined using electrochemical screen-printed electrodes (SPE) modified with different nanomaterials. The morpho-structural SEM/EDX analyses confirmed the presence of metal ions on the surface of the cell, with metal uptake being mediated by biosorption with hydroxyl, carboxyl, and amino groups as per FTIR observations. T. longibrachiatum was observed to pose a higher bioremediation potential compared to B. marisflavi, removing 87% of Cr and 67% of Zn, respectively. Conversely, B. marisflavi removed 86% of Pb from the solution, compared to 48% by T. longibrachiatum. Therefore, the fungal strain T. longibrachiatum could represent a viable option for Cr and Zn bioremediation strategies, whereas the bacterial strain B. marisflavi may be used in Pb bioremediation applications.

Elegant Nematodes Improve Our Understanding of Human Neuronal Diseases, the Role of Pollutants and Strategies of Resilience

The prevalence of neurodegenerative disorders such as Alzheimer's and Parkinson's disease are rising globally. The role of environmental pollution in neurodegeneration is largely unknown. Thus, this perspective advocates exposome research in C. elegans models of human diseases. The models express amyloid proteins such as Aβ, recapitulate the degeneration of specifically vulnerable neurons and allow for correlated neurobehavioral phenotyping throughout the entire life span of the nematode. Neurobehavioral traits like locomotion gaits, rigidity, or cognitive decline are quantifiable and carefully mimic key aspects of the human diseases. Underlying molecular pathways of neurodegeneration are elucidated in pollutant-exposed C. elegans Alzheimer's or Parkinson's models by transcriptomics (RNA-seq), mass spectrometry-based proteomics and omics addressing other biochemical traits. Validation of the identified disease pathways can be achieved by genome-wide association studies in matching human cohorts. A consistent One Health approach includes isolation of nematodes from contaminated sites and their comparative investigation by imaging, neurobehavioral profiling and single worm proteomics. C. elegans models of neurodegenerative diseases are likewise well-suited for high throughput methods that provide a promising strategy to identify resilience pathways of neurosafety and keep up with the number of pollutants, nonchemical exposome factors, and their interactions.

The contribution of the exposome to the burden of cardiovascular disease

Large epidemiological and health impact assessment studies at the global scale, such as the Global Burden of Disease project, indicate that chronic non-communicable diseases, such as atherosclerosis and diabetes mellitus, caused almost two-thirds of the annual global deaths in 2020. By 2030, 77% of all deaths are expected to be caused by non-communicable diseases. Although this increase is mainly due to the ageing of the general population in Western societies, other reasons include the increasing effects of soil, water, air and noise pollution on health, together with the effects of other environmental risk factors such as climate change, unhealthy city designs (including lack of green spaces), unhealthy lifestyle habits and psychosocial stress. The exposome concept was established in 2005 as a new strategy to study the effect of the environment on health. The exposome describes the harmful biochemical and metabolic changes that occur in our body owing to the totality of different environmental exposures throughout the life course, which ultimately lead to adverse health effects and premature deaths. In this Review, we describe the exposome concept with a focus on environmental physical and chemical exposures and their effects on the burden of cardiovascular disease. We discuss selected exposome studies and highlight the relevance of the exposome concept for future health research as well as preventive medicine. We also discuss the challenges and limitations of exposome studies.

Environmental pollutants and their effects on human health

Numerous environmental contaminants significantly contribute to human disease, affecting climate change and public and individual health, resulting in increased mortality and morbidity. Because of the scarcity of information regarding pollution exposure from less developed nations with inadequate waste management, higher levels of poverty, and limited adoption of new technology, the relationship between pollutants and health effects needs to be investigated more. A similar situation is present in many developed countries, where solutions are only discovered after the harm has already been done and the necessity for safeguards has subsided. The connection between environmental toxins and health needs to be better understood due to difficulties in quantifying exposure levels and a lack of systematic monitoring. Different pollutants are to blame for both chronic and acute disorders. Additionally, research becomes challenging when disease problems are seen after prolonged exposure. This review aims to discuss the present understanding of the association between environmental toxins and human health in bridging this knowledge gap. The genesis of cancer and the impact of various environmental pollutants on the human body's cardiovascular, respiratory, reproductive, prenatal, and neural health are discussed in this overview.

Health impacts of extreme weather events - Cascading risks in a changing climate

Background

Extreme weather events represent one of the most tangible impacts of anthropogenic climate change. They have increased in number and severity and a further increase is expected. This is accompanied by direct and indirect negative consequences for human health.

Methods

Flooding events, storms and droughts are analysed here for Germany from a systemic perspective on the basis of a comprehensive literature review. Cascading risks beyond the initial event are also taken into account in order to depict downstream consequences.

Results

In addition to the immediate health burdens caused by extreme weather events such as injuries, long-term consequences such as stress-related mental disorders occur. These stresses particularly affect certain vulnerable groups, e.g. older persons, children, pregnant women or first responders.

Conclusions

A look at the cascading risks described in the international literature allows us to develop precautionary measures for adaptation to the consequences of climate change. Many adaptation measures protect against different risks at the same time. In addition to planning measures, these include, above all, increasing the population's ability to protect itself through knowledge and strengthening of social networks.

Biochar applications for treating potentially toxic elements (PTEs) contaminated soils and water: a review

Environmental pollution with potentially toxic elements (PTEs) has become one of the critical and pressing issues worldwide. Although these pollutants occur naturally in the environment, their concentrations are continuously increasing, probably as a consequence of anthropic activities. They are very toxic even at very low concentrations and hence cause undesirable ecological impacts. Thus, the cleanup of polluted soils and water has become an obligation to ensure the safe handling of the available natural resources. Several remediation technologies can be followed to attain successful remediation, i.e., chemical, physical, and biological procedures; yet many of these techniques are expensive and/or may have negative impacts on the surroundings. Recycling agricultural wastes still represents the most promising economical, safe, and successful approach to achieving a healthy and sustainable environment. Briefly, biochar acts as an efficient biosorbent for many PTEs in soils and waters. Furthermore, biochar can considerably reduce concentrations of herbicides in solutions. This review article explains the main reasons for the increasing levels of potentially toxic elements in the environment and their negative impacts on the ecosystem. Moreover, it briefly describes the advantages and disadvantages of using conventional methods for soil and water remediation then clarifies the reasons for using biochar in the clean-up practice of polluted soils and waters, either solely or in combination with other methods such as phytoremediation and soil washing technologies to attain more efficient remediation protocols for the removal of some PTEs, e.g., Cr and As from soils and water.

Electrodeposition of Ag/ZIF-8-Modified Membrane for Water Remediation

Metal-organic framework (MOF)-based membranes have been widely used in gas and liquid separation due to their porous structures and tunable compositions. Depending on the guest components, heterostructured MOFs can exhibit multiple functions. In the present work, we report a facile and rapid preparation of zeolitic imidazolate framework-8 (ZIF-8) and silver nanoparticle incorporated ZIF-8 (Ag/ZIF-8)-based membranes on stainless-steel mesh (SSM) through a "green" electrodeposition method. The SSM was first coated with a Zn-plated layer which contains mainly zinc hydroxide nitrate (Zn₅(OH)₈(NO₃)₂·2H₂O) with a "leaf-like" morphology, providing anchoring points for the deposition of ZIF-8 and Ag/ZIF-8. It takes only 10 min to prepare a uniform coating of Zn₅(OH)₈(NO₃)₂·2H₂O in aqueous conditions without the use of a strong base; this is by far the most efficient way of making zinc hydroxide nitrate nanocrystals. Following a similar electrodeposition approach, ZIF-8 and Ag/ZIF-8-coated SSM can be prepared within 20 min by applying a small current. The encapsulation of Ag does not alter the chemical composition nor the crystal structure of ZIF-8. The resulting ZIF-8 and Ag/ZIF-8-coated SSM have been tested for their effectiveness for rhodamine B dye removal in a fast vacuum filtration setting. Additionally, growth of E. coli was significantly inhibited after overnight incubation with Ag/ZIF-8-coated SSM. Overall, we demonstrate a fast synthesis procedure to make ZIF-8 and Ag/ZIF-8-coated SSM membranes for organic dye removal with excellent antimicrobial activity.