In vitro particle size distributions in electronic and conventional cigarette aerosols suggest comparable deposition patterns

Physical and Chemical Characterization of Aerosols Produced from Experimentally Designed Nicotine Salt-Based E-Liquids

Nicotine salt-based e-liquids deliver nicotine more rapidly and efficiently to electronic nicotine delivery system (ENDS) users than freebase nicotine formulations. Nicotine salt-based products represent a substantial majority of the United States ENDS market. Despite the popularity of nicotine salt formulations, the chemical and physical characteristics of aerosols produced by nicotine salt e-liquids are still not well understood. To address this, this study reports the harmful and potentially harmful constituents (HPHCs) and particle sizes of aerosols produced by laboratory-made freebase nicotine and nicotine salt e-liquids. The nicotine salt e-liquids were formulated with benzoic acid, citric acid, lactic acid, malic acid, or oxalic acid. The nicotine salt aerosols had different HPHC profiles than the freebase nicotine aerosols, indicating that the carboxylic acids were not innocent bystanders. The polycarboxylic acid e-liquids containing citric acid, malic acid, or oxalic acid produced higher acrolein yields than the monocarboxylic acid e-liquids containing benzoic acid or lactic acid. Across most PG:VG ratios, nicotine benzoate or nicotine lactate aerosols contained the highest nicotine quantities (in %) and the highest nicotine yields (per milligram of aerosol). Additionally, the nicotine benzoate and nicotine lactate e-liquids produced the highest carboxylic acid yields under all tested conditions. The lower acid yields of the citric, malic, and oxalic acid formulations are potentially due to a combination of factors such as lower transfer efficiencies, lower thermostabilities, and greater susceptibility to side reactions because of their additional carboxyl groups serving as new sites for reactivity. For all nicotine formulations, the particle size characteristics were primarily controlled by the e-liquid solvent ratios, and there were no clear trends between nicotine salt and freebase nicotine aerosols that indicated nicotine protonation affected particle size. The carboxylic acids impacted aerosol output, nicotine delivery, and HPHC yields in distinct ways such that interchanging them in ENDS can potentially cause downstream effects.

GC/HRMS Analysis of E-Liquids Complements In Vivo Modeling Methods and can Help to Predict Toxicity

Tobacco smoking is a major risk factor for disease development, with the user inhaling various chemicals known to be toxic. However, many of these chemicals are absent before tobacco is "burned". Similar, detailed data have only more recently being reported for the e-cigarette with regards to chemicals present before and after the e-liquid is "vaped." Here, zebrafish were dosed with vaped e-liquids, while C57-BL/6J mice were vaped using nose-cone only administration. Preliminary assessments were made using e-liquids and GC/HRMS to identify chemical signatures that differ between unvaped/vaped and flavored/unflavored samples. Oxidative stress and inflammatory immune cell response assays were then performed using our in vivo models. Chemical signatures differed, e.g., between unvaped/vaped samples and also between unflavored/flavored e-liquids, with known chemical irritants upregulated in vaped and unvaped flavored e-liquids compared with unflavored e-liquids. However, when possible respiratory irritants were evaluated, these agents were predominantly present in only the vaped e-liquid. Both oxidative stress and inflammatory responses were induced by a menthol-flavored but not a tobacco-flavored e-liquid. Thus, chemical signatures differ between unvaped versus vaped e-liquid samples and also between unflavored versus flavored e-liquids. These flavors also likely play a significant role in the variability of e-liquid characteristics, e.g., pro-inflammatory and/or cytotoxic responses.

Vaping, Environmental Toxicants Exposure, and Lung Cancer Risk

Lung cancer (LC) is the second-most prevalent tumor worldwide. According to the most recent GLOBOCAN data, over 2.2 million LC cases were reported in 2020, with an estimated new death incident of 1,796,144 lung cancer cases. Genetic, lifestyle, and environmental exposure play an important role as risk factors for LC. E-cigarette, or vaping, products (EVPs) use has been dramatically increasing world-wide. There is growing concern that EVPs consumption may increase the risk of LC because EVPs contain several proven carcinogenic compounds. However, the relationship between EVPs and LC is not well established. E-cigarette contains nicotine derivatives (e.g., nitrosnornicotine, nitrosamine ketone), heavy metals (including organometal compounds), polycyclic aromatic hydrocarbons, and flavorings (aldehydes and complex organics). Several environmental toxicants have been proven to contribute to LC. Proven and plausible environmental carcinogens could be physical (ionizing and non-ionizing radiation), chemicals (such as asbestos, formaldehyde, and dioxins), and heavy metals (such as cobalt, arsenic, cadmium, chromium, and nickel). Air pollution, especially particulate matter (PM) emitted from vehicles and industrial exhausts, is linked with LC. Although extensive environmental exposure prevention policies and smoking reduction strategies have been adopted globally, the dangers remain. Combined, both EVPs and toxic environmental exposures may demonstrate significant synergistic oncogenicity. This review aims to analyze the current publications on the importance of the relationship between EVPs consumption and environmental toxicants in the pathogenesis of LC.

Effects of Device Settings and E-Liquid Characteristics on Mouth-Throat Losses of Nicotine Delivered with Electronic Nicotine Delivery Systems (ENDS)

Currently it is not fully understood how the device settings and electronic liquid (e-liquid) composition, including their form of nicotine content, impact mouth and throat losses, and potentially lead to the variations in total nicotine delivery to the human lungs. An in situ size assessment method was developed for real-time measurements at the mouthpiece and outlet of a biorelevant mouth-throat to account for the dynamic nature of the aerosol. The aerosol size, temperature, and delivery through the mouth-throat replica and the exhaled aerosol between the puff intervals were measured at different wattages using various e-liquid compositions. The effects of body temperature and humidity on aerosol size and nicotine delivery were also explored to evaluate the importance of considering realistic in vivo conditions in in vitro measurements. Notably, in vitro tests with body temperature and humidity in mouth-throat model vs room conditions, resulted in larger aerosol size at the end of the throat (Dv50=5.83±0.33 μm vs 3.05±0.15 μm), significantly higher thoracic nicotine delivery (>90% vs 50-85%) potentially due to the lower exhaled amount (<10% vs 15-50%). Besides, higher VG/PG ratios resulted in significantly lower exhaled amount and higher mouth-throat nicotine deposition. One of the main outcomes of the study was finding significantly lower exhaled amount and higher thoracic nicotine delivery with nicotine salt form vs free-base. Considering body temperature and humidity also showed significant enhancement in nicotine delivery, so it is essential to account for biorelevant experimental conditions in benchtop testing.

E-cigarette exposure augments murine abdominal aortic aneurysm development: role of Chil1

AIMS

Abdominal aortic aneurysm (AAA) is a common cardiovascular disease with a strong correlation to smoking, although underlying mechanisms have been minimally explored. Electronic cigarettes (e-cigs) have gained recent broad popularity and can deliver nicotine at comparable levels to tobacco cigarettes, but effects on AAA development are unknown.

METHODS AND RESULTS

We evaluated the impact of daily e-cig vaping with nicotine on AAA using two complementary murine models and found that exposure enhanced aneurysm development in both models and genders. E-cigs induced changes in key mediators of AAA development including cytokine chitinase-3-like protein 1 (CHI3L1/Chil1) and its targeting microRNA-24 (miR-24). We show that nicotine triggers inflammatory signalling and reactive oxygen species while modulating miR-24 and CHI3L1/Chil1 in vitro and that Chil1 is crucial to e-cig-augmented aneurysm formation using a knockout model.

CONCLUSIONS

In conclusion our work shows increased aneurysm formation along with augmented vascular inflammation in response to e-cig exposure with nicotine. Further, we identify Chil1 as a key mediator in this context. Our data raise concerns regarding the potentially harmful long-term effects of e-cig nicotine vaping.

Characterization of an Electronic Nicotine Delivery System (ENDS) Aerosol Generation Platform to Determine Exposure Risks

Evaluating vaping parameters that influence electronic nicotine delivery system (ENDS) emission profiles and potentially hazardous exposure levels is essential to protecting human health. We developed an automated multi-channel ENDS aerosol generation system (EAGS) for characterizing size-resolved particle emissions across pod- and mod-type devices using real-time monitoring instruments, an exposure chamber, and vaping parameters including different ventilation rates, device type and age, e-liquid formulation, and atomizer setup. Results show the ENDS device type, e-liquid flavoring, and nicotine content can affect particle emissions. In general, pod-type devices have unimodal particle size distributions and higher number emissions, while mod-type devices have bimodal size distributions and higher mass emissions. For pod-type devices, later puff fractions emit lower aerosols, which is potentially associated with the change of coil resistance and power during ageing. For a mod-type device, an atomizer with a lower resistance coil and higher power generates larger particle emissions than an atomizer with a greater resistance coil and lower power. The unventilated scenario produces higher particle emission factors, except for particle mass emission from pod-type devices. The data provided herein indicate the EAGS can produce realistic and reproducible puff profiles of pod- and mod-type ENDS devices and therefore is a suitable platform for characterizing ENDS-associated exposure risks.

Effects of Electronic Cigarette Exposure on Myocardial Infarction and No-Reflow, and Cardiac Function in a Rat Model

PURPOSE

We investigated the effects of exposure to electronic cigarettes (E-cig) vapor on the sizes of the no-reflow and myocardial infarction regions, and cardiovascular function compared to exposure to purified air and standard cigarette smoke.

METHODS AND RESULTS

Sprague Dawley rats (both male and female, 6 weeks old) were successfully exposed to filtered air (n = 32), E-cig with nicotine (E-cig Nic⁺, n = 26), E-cig without nicotine (E-cig Nic^-, n = 26), or standard cigarette smoke (1R6F reference, n = 31). All rats were exposed to inhalation exposure for 8 weeks, prior to being subjected to 30 minutes of left coronary artery occlusion followed by 3 hours of reperfusion. Exposure to E-cig vapor with or without nicotine or exposure to standard cigarettes did not increase myocardial infarct size or worsen the no-reflow phenomenon. Exposure to E-cig Nic⁺ reduced the body weight gain, and increased the LV weight normalized to body weight and LV wall thickness and enhanced the collagen deposition within the LV wall. E-cig exposure led to cardiovascular dysfunction, such as reductions in cardiac output, LV positive and negative dp/dt, suggesting a reduction in contractility and relaxation, and increased systemic arterial resistance after coronary artery occlusion and reperfusion in rats compared to air or cigarette exposure.

CONCLUSIONS

E-cig exposure did not increase myocardial infarct size or worsen the no-reflow phenomenon, but induced deleterious changes in LV structure leading to cardiovascular dysfunction and increased systemic arterial resistance after coronary artery occlusion followed by reperfusion.

Characterization of aerosols generated by high-power electronic nicotine delivery systems (ENDS): Influence of atomizer, temperature and PG:VG ratios

The aerosol characteristics of electronic nicotine delivery systems (ENDS) are important parameters in predicting health outcomes since parameters such as aerosol particle size correlate strongly to aerosol delivery and deposition efficiency. However, many studies to date do not account for aerosol aging, which may affect the measurement of ultra-fine particles that typically coagulate or agglomerate during puff development. To reduce aerosol aging, we herein present a unique instrumentation method that combines a) positive pressure ENDS activation and sample collection, b) minimization of both sample tubing length and dilution factors, and c) a high-resolution, electrical low-pressure impactor. This novel approach was applied to systematically investigate the effects of coil design, coil temperature, and propylene glycol to vegetable glycerol ratios on aerosol characteristics including aerosol mass generation, aerosol count generation, and the mass and count size distributions for a high-powered ENDS. Aerosol count measurements revealed high concentrations of ultra-fine particles compared to fine and coarse particles at 200°C, while aerosol mass measurements showed an increase in the overall aerosol mass of fine and coarse particles with increases in temperature and decreases in propylene glycol content. These results provide a better understanding on how various ENDS design parameters affect aerosol characteristics and highlight the need for further research to identify the design parameters that most impact ultra-fine particle generation.

Examining electronic nicotine delivery system use and perception of use among college students with and without asthma across the South

BackgroundThe effects of environmental tobacco smoke is a risk factor for everyone, but more so for individuals living with asthma. Most studies have focused on youth and young adults as the vulnerable population affected by secondhand smoke with policies related to secondhand smoke enacted to lessen such exposure given the known negative health effects. Most individuals are aware that secondhand exposure to tobacco smoke is not healthy, yet there is a shortage of literature on the secondhand vapor associated with electronic nicotine delivery systems (ENDS). Suggestions for nicotine, metals, and carcinogens in secondhand vapor are beginning to emerge in the literature but are still not common knowledge to the public. This study aims to look at the demographic differences among young adults (college students) with asthma and non-asthma concerning ENDS use. A secondary aim will also look at the difference in perceived health status and perception of harm in the relationship between asthma and ENDS use in these two populations. Methods: A cross-sectional online survey was designed and disseminated to two independent southeastern colleges. The survey was prepared following a comprehensive review of the literature by a group of experts focused on ENDS usage. The survey examined self-reported usage of and perceptions of ENDS within college students with and without asthma. Results: Approximately 50% of college-age students' perceived ENDS vapor as less harmful than traditional cigarette smoke. Around 24% of the students stated they use ENDS daily with over 50% of these students utilizing ENDS in the past 30 days. Asthma was a significant predictor in reporting lower perceived health status than students without asthma and perceived health status was a significant predictor of reporting fewer ever use of ENDS. Higher than the national average, 19% of students self-identified with an asthma diagnosis, and the use of ENDS was 20% in students without asthma and 27% in students with asthma. Conclusions: There are limited studies on perceptions related to ENDS and exposures in college students with and without asthma. Since 2007, various alternative forms of ENDS devices have been marketed. ENDS have gained popularity with young adults and college-age students, while rates of traditional cigarette usage have declined. College students report less perceived harm with ENDS over traditional cigarettes, yet studies acknowledge the high levels of the addictive substance nicotine. Of great concern is the lack of knowledge that college students have regarding nicotine based on their perceptions and the increasing use of these devices in those individuals with underlying respiratory conditions.

Enhancing the Community Health through Restricting Electronic Cigarettes

Smoking electronic cigarettes has become the subject of considerable debate among scientists, with its proponents claiming that it has a benefit for smoking cessation, since its drawbacks are much lower compared to conventional cigarettes. Moreover, proponents believe that electronic cigarettes can be used as nicotine replacement therapies (NTRs) in order to mitigate tobacco withdrawal syndrome and are the best choice for asthmatic smokers who cannot quit to smoke. However, the opponents argue that electronic cigarettes have numerous negative effects on people, especially the impacts of chemical substances (including fine and ultrafine particles), its role to undermine tobacco control and its influences on the ex-smokers or even non-smokers to start smoking. This essay will assess to assess the hazards of electronic cigarette use and its impacts on public health. Firstly, it will discuss the potential hazards generated by using e-cigarettes over a long exposure, including the adverse effects, followed by the drawbacks of e-cigarettes use on public health related to tobacco control and the decrease of people’s awareness.

A filter-based system mimicking the particle deposition and penetration in human respiratory system for secondhand smoke generation and characterization

INTRODUCTION

Secondhand smoke endangers both the environment and the health of nonsmokers. Due to the scarcity of repeatable data generated by human subjects, a system capable of generating representative secondhand smoke is essential for studying smoke properties. This work presents the design and validation of a filter-based system that could mimic the particle deposition and penetration in human respiratory system for secondhand smoke generation and characterization.

METHODS

Guided by our study on characterizing size-dependent filtration efficiency of common materials, we identified three filter media that generate similar particle deposition efficiencies compared to different regions of the human respiratory system over a wide submicron size range. We demonstrated the performance of the proposed filter-based system using various operating conditions. Additionally, we compared the properties of secondhand smoke particles to those of primary smoke particles.

RESULTS

The difference in aerosol deposition efficiencies between the filter-based system and the International Commission on Radiological Protection (ICRP) model was less than 10% in the size range of 30 to 500 nm. High concentrations of metals were detected in the secondhand smoke. The contents of Ni and Cr generated from the secondhand electronic cigarettes are at least 20 and 5 times above the regulated daily maximum intake amount.

CONCLUSION

Given the agreement in aerosol respiratory deposition between the filter-based system and the ICRP model, such a system can facilitate laboratory studies of secondhand smoke due to its simple structure, high repeatability, and ease of control while remaining free of human subjects.

An assessment of vaping-induced inflammation and toxicity: A feasibility study using a 2-stage zebrafish and mouse platform

It is currently understood that tobacco smoking is a major cause of pulmonary disease due to pulmonary/lung inflammation. However, due to a highly dynamic market place and an abundance of diverse products, less is known about the effects of e-cigarette (E-cig) use on the lung. In addition, varieties of E-cig liquids (e-liquids), which deliver nicotine and numerous flavor chemicals into the lungs, now number in the 1000s. Thus, a critical need exists for safety evaluations of these E-cig products. Herein, we employed a "2-stage in vivo screening platform" (zebrafish to mouse) to assess the safety profiles of e-liquids. Using the zebrafish, we collected embryo survival data after e-liquid exposure as well as neutrophil migration data, a key hallmark for a pro-inflammatory response. Our data indicate that certain e-liquids induce an inflammatory response in our zebrafish model and that e-liquid exposure alone results in pro-inflammatory lung responses in our C57BL/6J model, data collected from lung staining and ELISA analysis, respectively, in the mouse. Thus, our platform can be used as an initial assessment to ascertain the safety profiles of e-liquid using acute inflammatory responses (zebrafish, Stage 1) as our initial metric followed by chronic studies (C57BL/6J, Stage 2).

E-Cigarette (E-Cig) Liquid Composition and Operational Voltage Define the In Vitro Toxicity of Δ8Tetrahydrocannabinol/Vitamin E Acetate (Δ8THC/VEA) E-Cig Aerosols

The 2019 United States outbreak of E-cigarette (e-cig), or Vaping, Associated Acute Lung Injury (EVALI) has been linked to presence of vitamin E acetate (VEA) in Δ8tetrahydrocannabinol (Δ8THC)-containing e-liquids, as supported by VEA detection in patient biological samples. However, the pathogenesis of EVALI and the complex physicochemical properties of e-cig emissions remain unclear, raising concerns on health risks of vaping. This study investigates the effect of Δ8THC/VEA e-liquids and e-cig operational voltage on in vitro toxicity of e-cig aerosols. A novel E-cigExposure Generation System platform was used to generate and characterize e-cig aerosols from a panel of Δ8THC/VEA or nicotine-based e-liquids at 3.7 or 5 V. Human lung Calu-3 cells and THP-1 monocytes were exposed to cell culture media conditioned with collected e-cig aerosol condensate at doses of 85 and 257 puffs/m2 lung surface for 24 h, whereafter specific toxicological endpoints were assessed (including cytotoxicity, metabolic activity, reactive oxygen species generation, apoptosis, and inflammatory cytokines). Higher concentrations of gaseous volatile organic compounds were emitted from Δ8THC/VEA compared with nicotine-based e-liquids, especially at 5 V. Emitted PM2.5 concentrations in aerosol were higher for Δ8THC/VEA at 5 V and averagely for nicotine-based e-liquids at 3.7 V. Overall, aerosols from nicotine-based e-liquids showed higher bioactivity than Δ8THC/VEA aerosols in THP-1 cells, with no apparent differences in Calu-3 cells. Importantly, presence of VEA in Δ8THC and menthol flavoring in nicotine-based e-liquids increased cytotoxicity of aerosols across both cell lines, especially at 5 V. This study systematically investigates the physicochemical and toxicological properties of a model of Δ8THC/VEA and nicotine e-cigarette condensate exposure demonstrating that pyrolysis of these mixtures can generate hazardous toxicants whose synergistic actions potentially drive acute lung injury upon inhalation.

Electronic Cigarette Use and the Risk of Cardiovascular Diseases

Electronic cigarettes or e-cigarettes are the most frequently used tobacco product among adolescents. Despite the widespread use of e-cigarettes and the known detrimental cardiac consequences of nicotine, the effects of e-cigarettes on the cardiovascular system are not well-known. Several in vitro and in vivo studies delineating the mechanisms of the impact of e-cigarettes on the cardiovascular system have been published. These include mechanisms associated with nicotine or other components of the aerosol or thermal degradation products of e-cigarettes. The increased hyperlipidemia, sympathetic dominance, endothelial dysfunction, DNA damage, and macrophage activation are prominent effects of e-cigarettes. Additionally, oxidative stress and inflammation are unifying mechanisms at many levels of the cardiovascular impairment induced by e-cigarette exposure. This review outlines the contribution of e-cigarettes in the development of cardiovascular diseases and their molecular underpinnings.

Developmental Effects of Electronic Cigarette Use

Electronic cigarettes have gained widespread acceptance among adolescents and young adults. As a result of this popularity, there are concerns regarding the potential harm of primary, secondhand and thirdhand electronic cigarette exposures on fetal and postnatal development. In vitro studies have shown that constituents in electronic cigarette liquids, including nicotine, flavorings, and carrier agents can alter cellular processes and growth. Additionally, aerosolized electronic cigarette emissions have been shown to disrupt organ development and immune responses in preclinical studies. In clinical studies, an association between electronic cigarette use and frequent respiratory symptoms, greater asthma severity and impaired mucociliary clearance has been demonstrated with adolescent and young adult users of electronic cigarettes having twice the frequency of cough, mucus production, or bronchitis compared to nonusers. Along with the popularity of electronic cigarette use, secondhand electronic cigarette exposure has increased substantially; with almost one-fourth of middle and high school children reporting exposure to secondhand vapors. The health consequences of secondhand electronic cigarette exposure on children and other vulnerable populations are poorly understood but detectable levels of cotinine have been measured in nonusers. Pregnant women and their offspring are another vulnerable group at increased risk for health consequences from electronic cigarette exposure. Nicotine crosses the placenta and can disrupt brain and lung development in preclinical studies. This article will focus on the physiological and health effects associated with primary or secondhand exposure to electronic cigarettes. It is expected that with ongoing availability of electronic cigarettes as well as the accumulation of additional follow-up time for long-term outcomes, the risks associated with exposure will become better clarified. © 2022 American Physiological Society. Compr Physiol 12:3337-3346, 2022.

Influence of E-Liquid Humectants, Nicotine, and Flavorings on Aerosol Particle Size Distribution and Implications for Modeling Respiratory Deposition

Electronic cigarette, or vaping, products are used to heat an e-liquid to form an aerosol (liquid droplets suspended in gas) that the user inhales; a portion of this aerosol deposits in their respiratory tract and the remainder is exhaled, thereby potentially creating opportunity for secondhand exposure to bystanders (e.g., in homes, automobiles, and workplaces). Particle size, a critical factor in respiratory deposition (and therefore potential for secondhand exposure), could be influenced by e-liquid composition. Hence, the purposes of this study were to (1) test the influence of laboratory-prepared e-liquid composition [ratio of propylene glycol (PG) to vegetable glycerin (VG) humectants, nicotine, and flavorings] on particle size distribution and (2) model respiratory dosimetry. All e-liquids were aerosolized using a second-generation reference e-cigarette. We measured particle size distribution based on mass using a low-flow cascade impactor (LFCI) and size distribution based on number using real-time mobility sizers. Mass median aerodynamic diameters (MMADs) of aerosol from e-liquids that contained only humectants were significantly larger compared with e-liquids that contained flavorings or nicotine (p = 0.005). Humectant ratio significantly influenced MMADs; all aerosols from e-liquids prepared with 70:30 PG:VG were significantly larger compared with e-liquids prepared with 30:70 PG:VG (p = 0.017). In contrast to the LFCI approach, the high dilution and sampling flow rate of a fast mobility particle sizer strongly influenced particle size measurements (i.e., all calculated MMAD values were &lt; 75 nm). Dosimetry modeling using LFCI data indicated that a portion of inhaled particles will deposit throughout the respiratory tract, though statistical differences in aerosol MMADs among e-liquid formulations did not translate into large differences in deposition estimates. A portion of inhaled aerosol will be exhaled and could be a source for secondhand exposure. Use of laboratory-prepared e-liquids and a reference e-cigarette to standardize aerosol generation and a LFCI to measure particle size distribution without dilution represents an improved method to characterize physical properties of volatile aerosol particles and permitted determination of MMAD values more representative of e-cigarette aerosol in situ, which in turn, can help to improve dose modeling for users and bystanders.

Analysis of the Aerosol Generated from Tetrahydrocannabinol, Vitamin E Acetate, and Their Mixtures

E-cigarette, or vaping, product use-associated lung injury (EVALI) outbreak was linked to vitamin E acetate (VEA) used as a solvent for tetrahydrocannabinol (THC). Several studies were conducted to assess the products of VEA (and THC/VEA mixtures) thermal degradation as a result of vaporizing/aerosolizing from a traditional type (coil-cotton wick) and ceramic type coil vape pens. The particle size distribution (PSD) of VEA aerosol and the temperature VEA and THC/VEA mixtures are heated to were also measured for a few types of traditional and ceramic vape pens. The current study assessed the PSD of the aerosol generated from THC, VEA, and a number of THC/VEA mixtures using a dab-type vape pen under two different temperature settings and two puffing flow rates. Thermal degradation of THC, VEA, and THC/VEA mixtures were also assessed, and coil temperature was measured. Results showed the dependence of the PSD upon the chemical content of the aerosolized mixture as well as upon the puffing flow rate. Minimal thermal degradation was observed. Flaws in the vape pen's design, which most likely affected results, were detected. The suitability of VEA, THC, and THC/VEA mixtures with certain types of vape pens was discussed.

E-Cigarette Toxicology

Since the spread of tobacco from the Americas hundreds of years ago, tobacco cigarettes and, more recently, alternative tobacco products have become global products of nicotine addiction. Within the evolving alternative tobacco product space, electronic cigarette (e-cigarette) vaping has surpassed conventional cigarette smoking among adolescents and young adults in the United States and beyond. This review describes the experimental and clinical evidence of e-cigarette toxicity and deleterious health effects. Adverse health effects related to e-cigarette aerosols are influenced by several factors, including e-liquid components, physical device factors, chemical changes related to heating, and health of the e-cigarette user (e.g., asthmatic). Federal, state, and local regulations have attempted to govern e-cigarette flavors, manufacturing, distribution, and availability, particularly to underaged youths. However, the evolving e-cigarette landscape continues to impede timely toxicological studies and hinder progress made toward our understanding of the long-term health consequence of e-cigarettes.

Analytical methods for the identification of micro/nano metals in e-cigarette emission samples: a review

In this review, numerous analytical methods to quantify the heavy and trace elements emitted from electronic cigarettes, cigarettes liquid and atomizer. The selection of a method was dependent upon the purpose, e.g., quantification or identification of elements only. The introductory part of this review focuses on describing the importance of setting up an electronic cigarettes- associated safety profile. The review dealt with studies that assessed elements in sizes ranging from nano to micro. The formation of different degradation chemical substances as well as impurity trends can be indicated through chemical investigation of metals in electronic cigarettes. Some studies have been covered that show the uses and benefits of. It is noticeable from all the collected sources that the minerals emitted from the smoke of e- cigs do not constitute any significant damage, as the percentage is very small, with the exception of minerals that may be emitted from the components of the device after heating it if the components of the e- cig are of poor specifications, except in the case of long-term accumulation. For this reason, an electronic cigarette can help smokers to quit smoking tobacco and replace it with electronic cigarettes smoke with distinctive flavors.

Long-term cerebrovascular dysfunction in the offspring from maternal electronic cigarette use during pregnancy

Electronic cigarettes (E-cigs) have been promoted as harm-free or less risky than smoking, even for women during pregnancy. These claims are made largely on E-cig aerosol having fewer number of toxic chemicals compared with cigarette smoke. Given that even low levels of smoking are found to produce adverse birth outcomes, we sought to test the hypothesis that vaping during pregnancy (with or without nicotine) would not be harm-free and would result in vascular dysfunction that would be evident in offspring during adolescent and/or adult life. Pregnant female Sprague Dawley rats were exposed to E-cig aerosol (1 h/day, 5 days/wk, starting on gestational day 2 until pups were weaned) using e-liquid with 0 mg/mL (E-cig0) or 18 mg/mL nicotine (E-cig18) and compared with ambient air-exposed controls. Body mass at birth and at weaning were not different between groups. Assessment of middle cerebral artery (MCA) reactivity revealed a 51%-56% reduction in endothelial-dependent dilation response to acetylcholine (ACh) for both E-cig0 and E-cig18 in 1-mo, 3-mo (adolescent), and 7-mo-old (adult) offspring (P < 0.05 compared with air, all time points). MCA responses to sodium nitroprusside (SNP) and myogenic tone were not different across groups, suggesting that endothelial-independent responses were not altered. The MCA vasoconstrictor response (5-hydroxytryptamine, 5-HT) was also not different across treatment and age groups. These data demonstrate that maternal vaping during pregnancy is not harm-free and confers significant cerebrovascular health risk/dysfunction to offspring that persists into adult life. NEW & NOTEWORTHY These data established that vaping electronic cigarettes during pregnancy, with or without nicotine, is not safe and confers significant risk potential to the cerebrovascular health of offspring in early and adult life. A key finding is that vaping without nicotine does not protect offspring from cerebrovascular dysfunction and results in the same level of cerebrovascular dysfunction (compared with maternal vaping with nicotine), indicating that the physical and/or chemical properties from the base solution (other than nicotine) are responsible for the cerebrovascular dysfunction that we observed. Listen to this article's corresponding podcast at https://ajpheart.podbean.com/e/maternal-vaping-impairs-vascular-function-in-theoffspring/.

Impact of e-Liquid Composition, Coil Temperature, and Puff Topography on the Aerosol Chemistry of Electronic Cigarettes

E-cigarette aerosol is a complex mixture of gases and particles with a composition that is dependent on the e-liquid formulation, puffing regimen, and device operational parameters. This work investigated mainstream aerosols from a third generation device, as a function of coil temperature (315-510 °F, or 157-266 °C), puff duration (2-4 s), and the ratio of propylene glycol (PG) to vegetable glycerin (VG) in e-liquid (100:0-0:100). Targeted and untargeted analyses using liquid chromatography high-resolution mass spectrometry, gas chromatography, in situ chemical ionization mass spectrometry, and gravimetry were used for chemical characterizations. PG and VG were found to be the major constituents (>99%) in both phases of the aerosol. Most e-cigarette components were observed to be volatile or semivolatile under the conditions tested. PG was found almost entirely in the gas phase, while VG had a sizable particle component. Nicotine was only observed in the particle phase. The production of aerosol mass and carbonyl degradation products dramatically increased with higher coil temperature and puff duration, but decreased with increasing VG fraction in the e-liquid. An exception is acrolein, which increased with increasing VG. The formation of carbonyls was dominated by the heat-induced dehydration mechanism in the temperature range studied, yet radical reactions also played an important role. The findings from this study identified open questions regarding both pathways. The vaping process consumed PG significantly faster than VG under all tested conditions, suggesting that e-liquids become more enriched in VG and the exposure to acrolein significantly increases as vaping continues. It can be estimated that a 30:70 initial ratio of PG:VG in the e-liquid becomes almost entirely VG when 60-70% of e-liquid remains during the vaping process at 375 °F (191 °C). This work underscores the need for further research on the puffing lifecycle of e-cigarettes.

Toxicological assessment of electronic cigarette vaping: an emerging threat to force health, readiness and resilience in the U.S. Army

The U.S. Army and U. S. Army Public Health Center are dedicated to protecting the health, and readiness of Department of the Army Service Members, civilians, and contractors. Despite implementation of health programs, policies and tobacco control interventions, the advent of electronic nicotine delivery systems (ENDS), including electronic cigarettes (e-cigs), represent unregulated and poorly defined systems to supplant or substitute use of conventional nicotine products (e.g., cigarettes and pipe tobacco). E-cigs present unique challenges to healthcare officials vested in preventive medicine. The health impact of an e-cig and vaping on an individual's acute or chronic disease susceptibility, performance and wellness, is fraught with uncertainty. Given the relatively recent emergence of e-cigs, high-quality epidemiological studies, and applied biological research studies are severely lacking. In sparsely available epidemiological studies of short-term cardiovascular and respiratory health outcomes, any attempt at addressing the etiology of acute and chronic health conditions from e-cig use faces incredible challenges. Until relatively recently, this was complicated by an absent national regulatory framework and health agency guidance on the manufacture, distribution, selling and use of e-cigs or similar ENDS devices and their chemical constituents. Two key issues underpin public health concern from e-cig use: 1) continued or emergent nicotine addiction and potential use of these devices for vaping controlled substances; and 2) inadvertent sudden-onset or chronic health effects from inhalational exposure to low levels of complex chemical toxicants from e-cig use and vaping the liquid. Herein, the health impacts from e-cig vaping and research supporting such effects are discussed.

Hygroscopic and Chemical Properties of Aerosol Emissions at a Major Mining Facility in Iran: Implications for Respiratory Deposition

This study characterizes the hygroscopic and chemical nature of aerosols originating from ten locations (4 outdoors and 6 indoors) around the Gol-E-Gohar (GEG) iron ore mine (Iran), including an assessment of how hygroscopic growth alters particulate deposition in the respiratory system. Aerosols collected on filters in three diameter (Dp) ranges (total suspended particulates [TSP], Dp ≤ 10 μm [PM10], and Dp ≤ 2.5 μm [PM2.5]) were analyzed for chemical and hygroscopic characteristics. The water-soluble aerosol composition is dominated by species associated with directly emitted crustal matter such as chloride, sodium, calcium, and sulfate. There was minimal contribution from organic acids and other secondarily formed species such as inorganic salts. Aerosol growth factors at 90% relative humidity varied between 1.39 and 1.72 and exceed values reported for copper mines in the United States where similar data are available. Values of the hygroscopicity parameter kappa (0.19 to 0.45) were best related to the mass fraction of chloride among all the studied species. Kappa values were generally similar when comparing the three types of samples (TSP, PM2.5, PM10) at each site and also when comparing each of the ten sampling sites. Accounting for hygroscopic growth yields an increase in the deposition fraction for aerosols with a dry Dp between 0.2 and 2 μm based on International Commission on Radiological Protection model calculations, with more variability when examining each of the three individual head airway regions.

JUUL e-liquid exposure elicits cytoplasmic Ca2+ responses and leads to cytotoxicity in cultured airway epithelial cells

RATIONALE

The popularity of new and emerging tobacco products such as E-cigarettes (E-cigs) is rapidly expanding worldwide. However, uncertainties surrounding the potential health consequences due to the use of such products exist and warrant further study.

METHODS

Cultured A549 and Calu-3 airway epithelia were exposed to three out of the eight types of JUUL brand e-liquids ("Mint", "Virginia Tobacco" and "Menthol", all containing 3% nicotine at 1% and 3% (vol/vol) dilutions) and assessed for viability using a resazurin-based assay. Intracellular Ca2+ levels were measured using fluorescent indicators and pro-inflammatory cytokine levels were monitored by quantitative PCR (qPCR). Cultures were also analyzed by flow cytometry to evaluate apoptotic markers and cell viability.

RESULTS

Exposing the airway epithelial cells to the flavored JUUL e-liquids led to significant cytotoxicity, with the "Mint" flavor being the overall most cytotoxic. The "Mint" flavored e-liquid also led to significant elevations in intracellular Ca2+ and upregulation of the pro-inflammatory cytokine IL-6 and early apoptotic marker Annexin V.

CONCLUSIONS

JUUL e-liquid challenge resulted in a loss of airway epithelial cell viability, induced pro-inflammatory responses and eventually caused apoptosis.

An Open-Label, Randomized, Controlled, Crossover Study to Assess Nicotine Pharmacokinetics and Subjective Effects of the JUUL System with Three Nicotine Concentrations Relative to Combustible Cigarettes in Adult Smokers

Introduction

This randomized, open-label, crossover clinical study evaluated nicotine pharmacokinetics (PK) and subjective effects of the JUUL System (JS; Juul Labs, Inc.) with three nicotine concentrations compared to the usual brand (UB) cigarettes in 24 adult smokers.

Methods

At five study visits, subjects used either the JS in 59 mg/mL, JS 18 mg/mL (two visits), and JS 9 mg/mL (all tobacco-flavored) or smoked their UB cigarette first during a controlled puffing sequence (CPS) and then ad libitum (5 min) use sessions. Blood samples were taken at specified timepoints for 60 min in each session. The modified Product Evaluation Scale assessed subjective effects 30-min post-use in the CPS session.

Results

Maximum plasma nicotine concentration (C_max-BL), total nicotine exposure (AUC_0-60-BL), and rate of plasma nicotine rise were significantly lower for all JS products compared to subjects' UB cigarette in CPS and ad libitum use sessions. In both use sessions these PK parameters were significantly higher for JS 59 mg/mL compared to 18 and 9 mg/mL. Subjective measures of cigarette craving relief and “Enough Nicotine” for JS 59 mg/mL did not differ significantly from UB cigarettes, but JS 18 and 9 mg/mL were rated significantly lower than JS 59 mg/mL and UB cigarettes.

Conclusions

Nicotine exposure and subjective relief were directly related to JS nicotine concentration: higher nicotine concentrations gave rise to significantly greater plasma nicotine levels and relief from craving. Heavier and more dependent smokers may require the greater nicotine delivery of JS 59 mg/mL to successfully transition away from cigarettes.

Implications

It has been suggested that electronic nicotine delivery systems (ENDS) and other alternative nicotine delivery products that more closely mimic the nicotine pharmacokinetics (PK) of cigarettes may facilitate smokers transitioning away from cigarettes. We examined nicotine PK and subjective effects of JUUL System (JS) ENDS with three nicotine concentrations (59, 18 and 9 mg/mL) compared to combustible cigarettes. Nicotine delivery from JS ENDS was nicotine concentration dependent, with higher nicotine concentrations giving rise to higher nicotine exposure. These findings suggest that heavier and more dependent smokers may require ENDS with nicotine concentrations greater than 20 mg/mL to successfully transition away from cigarettes.

Estimating the Population Attributable Fraction of Asthma Due to Electronic Cigarette Use and Other Risk Factors Using Kentucky Behavioral Risk Factor Survey Data, 2016-2017

Introduction: Electronic nicotine delivery systems ENDS have become popular in the United States among both new users of nicotine and those seeking less harmful alternatives to traditional cigarettes. Users often perceive ENDS as being less harmful than traditional cigarettes. This study investigated the relationship between use of ENDS and asthma in a representative sample of adults. Methods: For this cross-sectional study, we used data from the Kentucky Behavioral Risk Factor Surveillance System telephone survey data from 2016-2017. Using a weighted multivariable logistic regression analysis, we identified important covariates to adjust for to calculate the population attributable fraction (PAF) of asthma due to ENDS and other modifiable risk factors factors (cigarette use, obesity, education, and employment). The confidence intervals for the PAFs were estimated using bootstrap methods of variance estimation. Results: We found that 10.6% of those aged 18-30 reported currently had asthma. After adjusting for noted covariates, ENDS use did not significantly increase the odds of asthma. In the final PAF model, the PAF of asthma due to ENDS was 0.4% (95% CI: -5.41, 6.21). Conclusion: While these findings suggest only modest effects of ENDS use on asthma prevalence, future research including older age groups and more long-term users might produce different results.

Check the gap: Facemask performance and exhaled aerosol distributions around the wearer

Current facemask research focuses on material characterization and efficiency; however, facemasks are often not tested such that aerosol distributions are evaluated from the gaps in the sides, bottom, and nose areas. Poor evaluation methods could lead to misinformation on optimal facemasks use; a high-throughput, reproducible method which illuminates the issue of fit influencing aerosol transmission is needed. To this end, we have created an in vitro model to quantify particle transmission by mimicking exhalation aerosols in a 3D printed face-nose-mouth replica via a nebulizer and quantifying particle counts using a hand-held particle counter. A sewn, sewn with pipe cleaner nose piece, and sewn with a coffee filter facemask were used to evaluate current common homemade sewn facemask designs, benchmarked against industry standard surgical, N95 respirator tightly fit, and N95 respirator loosely fit facemasks. All facemasks have significantly reduced particle counts in front of the facemask, but the side and top of the facemask showed increases in particle counts over the no facemask condition at that same position, suggesting that some proportion of aerosols are being redirected to these gaps. An altered size distribution of aerosols that escape at the vulnerable positions was observed; escaped particles have larger count median diameters, with a decreased ratio of smaller to larger particles, possibly due to hygroscopic growth or aggregation. Of the homemade sewn facemasks, the facemask with a coffee filter insert performed the best at reducing escaped aerosols, with increased efficiency also observed for sewn masks with a pipe cleaner nose piece. Importantly, there were minimal differences between facemasks at increasing distances, which supports that social distance is a critical element in reducing aerosol transmission. This work brings to light the importance of quantifying particle count in positions other than directly in front of the facemask and identifies areas of research to be explored.

Aerosol droplet-size distribution and airborne nicotine portioning in particle and gas phases emitted by electronic cigarettes

The reliable characterization of particle size distribution and nicotine delivery emitted by electronic cigarettes (ECs) is a critical issue in their design. Indeed, a better understanding of how nicotine is delivered as an aerosol with an appropriate aerodynamic size is a necessary step toward obtaining a well-designed nicotine transfer from the respiratory tract to the bloodstream to better satisfy craving and improve smoking cessation rates. To study these two factors, recent models of EC devices and a dedicated vaping machine were used to generate aerosols under various experimental conditions, including varying the EC power level using two different types of atomizers. The aerodynamic particle sizing of the resulting aerosol was performed using a cascade impactor. The nicotine concentration in the refill liquid and the aerosol droplet was quantified by liquid chromatography coupled with a photodiode array. The vaporization process and the physical and chemical properties of the EC aerosol were very similar at 15 watts (W) and 25 W using the low-power atomizer but quite distinct at 50 W using the high-power atomizer, as follows: (1) the mass median aerodynamic diameters ranged from 1.06 to 1.19 µm (µm) for low power and from 2.33 to 2.46 µm for high power; (2) the nicotine concentrations of aerosol droplets were approximately 11 mg per milliliter (mg/mL) for low power and 17 mg/mL for high power; and (3) the aerosol droplet particle phase of the total nicotine mass emitted by EC was 60% for low power and 95% for high power. The results indicate that varying the correlated factors (1) the power level and (2) the design of atomizer (including the type of coil and the value of resistance used) affects the particle-size distribution and the airborne nicotine portioning between the particle phase and the gas phase in equilibrium with the airborne droplets.

Critical research gaps in electronic cigarette devices and nicotine aerosols

Electronic cigarettes (e-cigs) are devices that aerosolize nicotine-containing liquids for delivery as an inhaled vapor. E-cigs are currently marketed as smoking cessation devices, though the emergence and rapid adoption of these devices in recent years has sparked a great deal of concern over their safety. Given the plethora of devices and nicotine solutions available on the market and the lack of regulation and quality control, it is imperative that these devices and nicotine formulations are studied to assess critical operating parameters, the pharmacokinetic profiles of the inhaled nicotine, and the toxicity profiles of the e-cig aerosols. This review aims to deliver an overview of current research regarding electronic cigarette devices, nicotine-containing liquid formulations, pharmacokinetics of nicotine, and toxicology studies in order to highlight areas lacking in research or requiring greater standardization and regulation.

Nicotine forms: why and how do they matter in nicotine delivery from electronic cigarettes?

INTRODUCTION

Unregulated e-cigarette devices and their nicotine content have amplified the potential of e-cigarettes as addictive agents. Several e-cigarette-related parameters have been identified altering nicotine's absorption profile, so their potential effects on addiction should be considered. Of these factors, nicotine forms (protonated and free base) play a significant role in the addiction potential yet their impact on nicotine's absorption has been studied with limited research.

AREAS COVERED

Current review aims to emphasize on the possible mechanism behind different absorption profiles of nicotine forms considering their physical states (droplet and vapor phase) and the aerosol particle size, their analysis in e-cigarette research and the regulatory attention warranted by them to combat nicotine addiction in the population due to e-cigarettes.

EXPERT OPINION

The protonated form of nicotine is being correlated with the smooth sensory effects and high nicotine absorption as compared to free base nicotine. With the introduction of nicotine salts, which yield mostly the protonated form, the youth popularity of e-cigarettes has spiked exponentially. While it is important to control nicotine levels in e-cigarette products, attention should also be given to the nicotine forms present in these products in order to address nicotine addiction in the population.

E-cigarette device power moderates the effects of non-tobacco flavors and nicotine on product appeal in young adults

BACKGROUND

Identifying e-cigarette product characteristics that moderate the effects of non-tobacco flavors and nicotine on user appeal can inform regulations issued in tandem with e-cigarette nicotine and flavor policies aimed to protect young adult health. An e-cigarette device's electrical power affects the amount of solution aerosolized per puff, leading to more concentrated or diluted aerosol, which may alter product appeal. This laboratory experiment tested whether e-cigarette device power moderated the independent and interactive effects of non-tobacco flavors and nicotine on appeal in young adults.

METHOD

In a within-subject design single-visit protocol, young adult e-cigarette users (N = 100) administered standardized doses of e-cigarette solutions varying in flavor (fruit, menthol, tobacco) and nicotine (nicotine-containing [6 mg/mL], nicotine-free). Solutions were administered via a variable-voltage tank-style device at low (7.3 W[3.3 V@1.5 Ω resistance]) and high (12.3 W[4.3 V@1.5 Ω resistance]) power settings. Participants rated each dose's appeal (0-100 scale).

RESULTS

The high (vs. low) power setting attenuated the appeal-enhancing effects of menthol (vs. tobacco) flavors (Menthol × Power, estimate = -5.44, P = .03). Power did not moderate the appeal-enhancing effects of fruit flavors. High (vs. low) power amplified the appeal-reducing effects of nicotine-containing (vs. nicotine-free) solutions (Nicotine × Power, estimate = 6.69, P < .001) and augmented the extent to which fruit and menthol flavors suppressed nicotine's appeal-reducing effects (Flavor × Nicotine × Power, estimates = 9.40-14.85, Ps≤0.03).

CONCLUSION

E-cigarette device power appears to moderate flavor- and nicotine-induced changes in product appeal in nuanced ways, including by augmenting the ability of non-tobacco flavors to mask nicotine's appeal-reducing effects. Regulatory restrictions on high-powered e-cigarette devices warrant consideration in efforts to protect young adult health.

Effects of Electronic Cigarettes on Indoor Air Quality and Health

With the rapid increase in electronic cigarette (e-cig) users worldwide, secondhand exposure to e-cig aerosols has become a serious public health concern. We summarize the evidence on the effects of e-cigs on indoor air quality, chemical compositions of mainstream and secondhand e-cig aerosols, and associated respiratory and cardiovascular effects. The use of e-cigs in indoor environments leads to high levels of fine and ultrafine particles similar to tobacco cigarettes (t-cigs). Concentrations of chemical compounds in e-cig aerosols are generally lower than those in t-cig smoke, but a substantial amount of vaporized propylene glycol, vegetable glycerin, nicotine, and toxic substances, such as aldehydes and heavy metals, has been reported. Exposures to mainstream e-cig aerosols have biologic effects but only limited evidence shows adverse respiratory and cardiovascular effects in humans. Long-term studies are needed to better understand the dosimetry and health effects of exposures to secondhand e-cig aerosols.

Electronic cigarettes containing nicotine increase endothelial and platelet derived extracellular vesicles in healthy volunteers

BACKGROUND AND AIMS

E-cigarette use is increasingly common. Whether e-cigarettes are harmful to human health is an intensely debated subject. In order to investigate whether e-cigarettes with and without nicotine cause different vascular responses, we obtained blood samples from healthy young volunteers who performed brief active e-cigarette inhalations. Extracellular vesicles (EVs) of endothelial and platelet origin were measured to determine vascular changes.

METHODS

Using a randomized, double-blind, crossover design, 17 healthy occasional smokers inhaled 30 puffs of e-cigarette vapor during 30 min. Blood samples were collected at baseline, as well as at 0, 2, 4 and 6 h post-exposure. EVs from platelets and endothelial cells were measured by flow cytometry.

RESULTS

Platelet and endothelial derived EVs were significantly increased with peak levels seen at 4 h following exposure to active inhalation of e-cigarette vapor with nicotine. Moreover, platelet derived EVs, expressing platelet activation marker P-selectin and the inflammation marker, CD40 ligand, were also significantly increased following inhalation of e-cigarette vapor with nicotine. In addition, platelet derived EVs expressing CD40 ligand was increased after inhalation of e-cigarette vapor without nicotine.

CONCLUSION

As few as 30 puffs of nicotine-containing e-cigarette vapor caused an increase in levels of circulating EVs of endothelial and platelet origin, which may signify underlying vascular changes. Although e-cigarette vapor without nicotine caused an increase in platelet EVs expressing CD40 ligand, nicotine, as a component in the vapor, seems to have a more compelling effect on extracellular vesicle formation and protein composition.

Investigating E-Cigarette Particle Emissions and Human Airway Depositions under Various E-Cigarette-Use Conditions

E-cigarette use is dramatically increasing, particularly with adolescents. While the chemical composition of e-liquids and e-vapor is well characterized, the particle size distribution and the human airways deposition patterns of e-cigarette particles are understudied and poorly understood despite their likely contribution to adverse health effects from e-cigarette usage. In this study, we examined the impacts of e-cigarette device power, e-liquid composition, and vaping topography on e-cigarette particle sizes and their deposition in human airways. In addition, we observed that particle measurement conditions (dilution ratio, temperature, and humidity) significantly affect measured e-cigarette particle sizes. E-cigarette power output significantly increased particle count median diameters (CMD) from 174 ± 13 (particles generated under 6.4 W) to 236 ± 14 nm (particles generated under 31.1 W). E-cigarette particles generated from propylene glycol-based e-liquids (CMD = 145 ± 8 nm and mass median diameter [MMD] = 3.06 ± 0.17 μm) were smaller than those generated from vegetable glycerin-based e-liquids (CMD = 182 ± 9 nm and MMD = 3.37 ± 0.21 μm). Puff volume also impacted vapor particle size: CMD and MMD were 154 ± 11 nm and 3.50 ± 0.27 μm, 163 ± 6 nm and 3.35 ± 0.24 μm, and 146 ± 12 nm and 2.95 ± 0.14 μm, respectively, for 35, 90, and 170 mL puffs. Estimated e-cigarette particle mass deposition fractions in tracheobronchial and bronchoalveolar regions were 0.504-0.541 and 0.073-0.306, respectively. Interestingly, e-cigarette particles are smaller than the particles generated from cigarette smoking but have similar human airway deposition patterns.

Effects of propylene glycol, vegetable glycerin, and nicotine on emissions and dynamics of electronic cigarette aerosols

An electronic cigarette (e-cig) generates aerosols by vaporizing the e-liquid, which mainly consists of propylene glycol (PG), vegetable glycerin (VG), and nicotine. Understanding the effects of e-liquid main compositions on e-cig aerosols is important for exposure assessment. This study investigated how the PG/VG ratio and nicotine content affect e-cig aerosol emissions and dynamics. A tank-based e-cig device with 10 different flavorless e-liquid mixtures (e.g., PG/VG ratios of 0/100, 10/90, 30/70, 50/50, and 100/0 with 0.0% or 2.4% nicotine) was used to puff aerosols into a 0.46 m³ stainless steel chamber for 0.5 h. Real-time measurements of particle number concentration (PNC), fine particulate matter (PM_2.5), and particle size distributions were conducted continuously throughout the puffing and the following 2-h decay period. During the decay period, particle loss rates were determined by a first-order log-linear regression and used to calculate the emission factor. The addition of nicotine in the e-liquid significantly decreased the particle number emission factor by 33%. The PM_2.5 emission factor significantly decreased with greater PG content in the e-liquid. For nicotine-free e-liquids, increasing the PG/VG ratio resulted in increased particle loss rates measured by PNC and PM_2.5. This pattern was not observed with nicotine in the e-liquids. The particle loss rates, however, were significantly different with and without nicotine especially when the PG/VG ratios were greater than 30/70. Compared with nonvolatile diethyl-hexyl subacute (DEHS) aerosols, e-cig particle concentration decayed faster inside the chamber, presumably due to evaporation. These results have potential implications for assessing human exposure to e-cig aerosols.

State-of-the-art methods and devices for generation, exposure, and collection of aerosols from e-vapor products

E-vapor products (EVP) have become popular alternatives for cigarette smokers who would otherwise continue to smoke. EVP research is challenging and complex, mostly because of the numerous and rapidly evolving technologies and designs as well as the multiplicity of e-liquid flavors and solvents available on the market. There is an urgent need to standardize all stages of EVP assessment, from the production of a reference product to e-vapor generation methods and from physicochemical characterization methods to nonclinical and clinical exposure studies. The objective of this review is to provide a detailed description of selected experimental setups and methods for EVP aerosol generation and collection and exposure systems for their in vitro and in vivo assessment. The focus is on the specificities of the product that constitute challenges and require development of ad hoc assessment frameworks, equipment, and methods. In so doing, this review aims to support further studies, objective evaluation, comparison, and verification of existing evidence, and, ultimately, formulation of standardized methods for testing EVPs.

Chronic E-Cigarette Use Increases Neutrophil Elastase and Matrix Metalloprotease Levels in the Lung

Rationale: Proteolysis is a key aspect of the lung's innate immune system. Proteases, including neutrophil elastase and MMPs (matrix metalloproteases), modulate cell signaling, inflammation, tissue remodeling, and leukocyte recruitment via cleavage of their target proteins. Excessive proteolysis occurs with chronic tobacco use and is causative for bronchiectasis and emphysema. The effect of e-cigarettes (vaping) on proteolysis is unknown.

Objectives: We used protease levels as biomarkers of harm to determine the impact of vaping on the lung.

Methods: We performed research bronchoscopies on healthy nonsmokers, cigarette smokers, and e-cigarette users (vapers), and determined protease levels in BAL. In parallel, we studied the effects of e-cigarette components on protease secretion in isolated human blood neutrophils and BAL-derived macrophages. We also analyzed the nicotine concentration in induced sputum and BAL.

Measurements and Main Results: Neutrophil elastase, MMP-2, and MMP-9 activities and protein levels were equally elevated in both vapers' and smokers' BAL relative to nonsmokers. In contrast, antiprotease levels were unchanged. We also found that exposure of isolated neutrophils and macrophages to nicotine elicited dose-dependent increases in protease release. After vaping, measurable levels of nicotine were detectable in sputum and BAL, which corresponded to the half-maximal effective concentration values for protease release seen in immune cells.

Conclusions: We conclude that vaping induces nicotine-dependent protease release from resident pulmonary immune cells. Thus, chronic vaping disrupts the protease-antiprotease balance by increasing proteolysis in lung, which may place vapers at risk of developing chronic lung disease. These data indicate that vaping may not be safer than tobacco smoking.

A pre-test post-test assessment of non-invasive keratograph break up time and corneal epithelial thickness after vaping

BACKGROUND

The effects of electronic cigarettes on the ocular surface has yet to be shown. The purpose of the study was to assess the impact of e-cigarette use on the anterior corneal surface integrity.

METHODS

Forty three males and 21 females with an average of 21years were required to vape 0.05ml of e-liquid of 8mg nicotine concentration. Corneal epithelial thickness (CET) and Non Invasive Keratograph Tear Break up Time (NIKBUT) measurements were obtained prior to and post vaping. The Optovue iVue optical coherence topographer was used to measure central; superior; inferior; nasal and temporal CET and NIKBUT was assessed using the Oculus Keratograph 5M.

RESULTS

There was a mean increase for central corneal epithelial thickness of 0.3448 microns. The superior CET increased by 0.2414 microns. The inferior CET increased by 0.2931microns. The nasal CET increased by 0.2069 microns. The temporal CET increased by 0.2759 microns. The mean change in NIKBUT post-vaping was an increase of 1.40 seconds. All observations occurred at p > 0.05.

CONCLUSION

The acute effect of e-cigarette use does not impact corneal epithelial thickness and non-invasive keratography tear break up time after 10 puffs mild exposure but more research is needed to assess if this remains the case with more frequent, higher exposure.

The cardiovascular effects of electronic cigarettes: A systematic review of experimental studies

BACKGROUND

Smoking is responsible for substantial cardiovascular morbidity and mortality. Electronic cigarettes have been advocated as a means to reduce this disease burden; by reducing exposure to harmful substances in smokers who are unable to quit. Concerns have been raised however, about cardiovascular effects of their use, with inhalants containing carbonyls and fine particulate matter. We systematically reviewed experimental studies of in vitro, animal, and human cardiovascular effects associated with electronic cigarette use.

METHODS

A literature search was conducted using Ovid MEDLINE & Embase databases, identifying experimental studies investigating cardiovascular effects of electronic cigarette use. Subsequently, Cochrane Risk of Bias tools were used to assess study quality. Any differences in outcomes by conflict of interest and risk of bias status were sought.

RESULTS

38 studies were included, investigating animals (n=6), humans (n=24) and human cardiovascular cells in vitro (n=8). 74.3% of studies found potentially harmful effects. Increased sympathetic nerve activity was observed in human studies, whilst platelet haemostatic processes, reactive oxygen species production and endothelial dysfunction were reported across all study types. Studies with conflicts of interest or median-high risk of bias were less likely to identify potentially harmful effects (p=0.0007, p=0.04 respectively).

DISCUSSION

Most studies suggest potential for cardiovascular harm from electronic cigarette use, through mechanisms that increase risk of thrombosis and atherosclerosis. Notably, studies with conflicts of interest are significantly less likely to identify concerning cardiovascular effects. Included studies examine healthy, adult participants, limiting generalisation to potential high-risk groups including individuals with established cardiovascular disease or young, non-smokers.

The role of DJ-1 in human primary alveolar type II cell injury induced by e-cigarette aerosol

The alveolus participates in gas exchange, which can be impaired by environmental factors and toxins. There is an increase in using electronic cigarettes (e-cigarettes); however, their effect on human primary alveolar epithelial cells is unknown. Human lungs were obtained from nonsmoker organ donors to isolate alveolar type II (ATII) cells. ATII cells produce and secrete pulmonary surfactant and restore the epithelium after damage, and mitochondrial function is important for their metabolism. Our data indicate that human ATII cell exposure to e-cigarette aerosol increased IL-8 levels and induced DNA damage and apoptosis. We also studied the cytoprotective effect of DJ-1 against ATII cell injury. DJ-1 knockdown in human primary ATII cells sensitized cells to mitochondrial dysfunction as detected by high mitochondrial superoxide production, decreased mitochondrial membrane potential, and calcium elevation. DJ-1 knockout (KO) mice were more susceptible to ATII cell apoptosis and lung injury induced by e-cigarette aerosol compared with wild-type mice. Regulation of the oxidative phosphorylation (OXPHOS) is important for mitochondrial function and protection against oxidative stress. Major subunits of the OXPHOS system are encoded by both nuclear and mitochondrial DNA. We found dysregulation of OXPHOS complexes in DJ-1 KO mice after exposure to e-cigarette aerosol, which could disrupt the nuclear/mitochondrial stoichiometry, resulting in mitochondrial dysfunction. Together, our results indicate that DJ-1 deficiency sensitizes ATII cells to damage induced by e-cigarette aerosol leading to lung injury.

Real-Time Assessment of E-Cigarettes and Conventional Cigarettes Emissions: Aerosol Size Distributions, Mass and Number Concentrations

Cigarette smoke is a complex mixture of chemical compounds which are emitted during the processes of tobacco combustion. Electronic cigarettes (e-cigs) are expected to produce less harmful compounds due to the absence of tobacco leaf combustion. However, potential risks of the passive exposure to the aerosol exhaled by e-cig users have been raised in the last decade. In this study, the aerosols with diameter less than 1 μm (PM₁) produced by vaping of various e-cig liquids were compared to those generated by smoking conventional cigarettes in real time. The mass and number concentration along with the number size distribution were measured in a closed room of 35 m³ volume. Our results showed that aerosols emitted from e-cig liquids had a different profile compared to those from conventional cigarettes. Although e-cigs initially produced higher particle mass and number concentrations, their emissions had much shorter lifetime of approximately 10–20 s, in comparison with the conventional and hand-rolling cigarette particulate emissions which had a dissipation time of approximately 1.4 h in a 35 m³ room. E-cigs emitted aerosols which volatilized rapidly, as they probably consisted almost only of propylene glycol and/or vegetable glycerin.

The Effect of Electronic Cigarette User Modifications and E-liquid Adulteration on the Particle Size Profile of an Aerosolized Product

Electronic cigarettes (e-cigarettes) are an alternate nicotine delivery system that generate a condensation aerosol to be inhaled by the user. The size of the droplets formed in the aerosol can vary and contributes to drug deposition and ultimate bioavailability in the lung. The growing popularity of e-cigarette products has caused an increase in internet sources promoting the use of drugs other than nicotine (DOTNs) in e-cigarettes. The purpose of this study was to determine the effect of various e-cigarette and e-liquid modifications, such as coil resistance, battery voltage, and glycol and drug formulation, on the aerosol particle size. E-liquids containing 12 mg/mL nicotine prepared in glycol compositions of 100% propylene glycol (PG), 100% vegetable glycerin (VG), or 50:50 PG:VG were aerosolized at three voltages and three coil resistances. Methamphetamine and methadone e-liquids were prepared at 60 mg/mL in 50:50 PG:VG and all e-liquids were aerosolized onto a 10 stage Micro-Orifice Uniform Deposit Impactor. Glycol deposition correlated with drug deposition, and the majority of particles centered between 0.172–0.5 μm in diameter, representing pulmonary deposition. The 100% PG e-liquid produced the largest aerosol particles and the 100% VG and 50:50 PG:VG e-liquids produced ultra-fine particles <0.3 μm. The presence of ultrafine particles indicates that drugs can be aerosolized and reach the pulmonary alveolar regions, highlighting a potential for abuse and risk of overdose with DOTNs aerosolized in an e-cigarette system.

Electronic cigarettes in the indoor environment

The use of electronic cigarettes (e-cigarettes or "vaping") has seen an unprecedented increase worldwide. Vaping has been promoted as a beneficial smoking cessation tool and an alternative nicotine delivery device that contains no combustion by-products. However, nicotine is highly addictive, and the increased use of nicotine-containing e-cigarettes among teens and individuals who are not in need of smoking cessation may lead to overall greater nicotine dependence in the population. Furthermore, available research indicates that vaping solutions and their emissions may contain much more than just nicotine, including aerosolized flavorings, propylene glycol (PG), and other intentional and unintentional contaminants. These materials could present undefined potential health hazards to both e-cigarette users and bystanders, the full extent of which is not well understood at this time. Whereas e-cigarette usage and exposures may lower some or most of the risks associated with conventional cigarette use, the health effects of nicotine and aerosol exposures from e-cigarettes are not well understood. Research indicates that vaping aerosols are not benign, especially for nearby people in areas with limited ventilation and people with compromised health conditions. In addition, e-juice liquids have already been responsible for an increase in accidental poisonings in children. Because the magnitude of health and safety hazards that vaping may present to nonusers remains unclear, it is prudent to manage and control vaping in indoor locations where smoking is currently restricted. Based on a review of current scientific information, the American Industrial Hygiene Association (AIHA) recommends that e-cigarettes should be considered a source of aerosols, volatile organic compounds (VOCs), and particulates in the indoor environment that have not been thoroughly characterized or evaluated for health risk or safety.