Cellulose biosynthesis

Harnessing precursor-directed biosynthesis with glucose derivatives to access cotton fibers with enhanced physical properties

Cotton ovule in vitro cultures are a promising platform for exploring biofabrication of fibers with tailored properties. When the ovules' growth medium is supplemented with chemically synthesized cellulose precursors, it results in their integration into the developing fibers, thereby tailoring their end properties. Here, we report the feeding of synthetic glucosyl phosphate derivative, 6-deoxy-6-fluoro-glucose-1-phosphate (6F-Glc-1P) to cotton ovules growing in vitro, demonstrating the metabolic incorporation of 6F-Glc into the fibers with enhanced mechanical properties and moisture-retention capacity while emphasizing the role of molecular hierarchical architecture in defining functional characteristics and mechanical properties. This incorporation strategy bypasses the early steps of conventional metabolic pathways while broadening the range of functionalities that can be employed to customize fiber end properties. Our approach combines materials science, chemistry, and plant sciences to illustrate the innovation required to find alternative solutions for sustainable production of functional cotton fibers with enhanced and emergent properties.

Enhancement of Biomass Conservation and Bioethanol Production of Sweet Sorghum Silage by Constructing Synergistic Microbial Consortia

The efficient storage of materials before bioethanol production could be key to improving pretreatment protocol and facilitating biodegradation, in turn improving the cost-effectiveness of biomass utilization. Biological inoculants were investigated for their effects on ensiling performance, biodegradability of silage materials, and final bioethanol yield from sweet sorghum. Two cellulolytic microbial consortia (CF and PY) were used to inoculate silages of sweet sorghum, with and without combined lactic acid bacteria (Xa), for up to 60 days of ensiling. We found that the consortia notably decreased pH and ammonia nitrogen content while increasing lactic acid/acetic acid ratios. The microbes also functioned in synergy with Xa, significantly reducing lignocellulose content and improving biomass preservation. First-order exponential decay models captured the kinetics of nonstructural carbohydrates and suggested high water-soluble carbohydrate (grams per kilogram dry matter [DM]) preservation potential in PY-Xa (33.48), followed by CF-Xa (30.51). Combined addition efficiently improved enzymatic hydrolysis and enhanced bioethanol yield, and sweet sorghum treated with PY-Xa had the highest ethanol yield (28.42 g L-1). Thus, combined bioaugmentation of synergistic microbes provides an effective method of improving biomass preservation and bioethanol production from sweet sorghum silages. IMPORTANCE Ensiling is an effective storage approach to ensure stable year-round supply for downstream biofuel production; it offers combined facilities of storage and pretreatment. There are challenges in ensiling sweet sorghum due to its coarse structure and high fiber content. This study provides a meaningful evaluation of the effects of adding microbial consortia, with and without lactic acid bacteria, on changes in key properties of sweet sorghum. This study highlighted the bioaugmented ensiling using cellulolytic synergistic microbes to outline a cost-effective strategy to store and pretreat sweet sorghum for bioethanol production.

Biological characteristics and pathogenicity of Acanthamoeba

Acanthamoeba is an opportunistic protozoa, which exists widely in nature and is mainly distributed in soil and water. Acanthamoeba usually exists in two forms, trophozoites and cysts. The trophozoite stage is one of growth and reproduction while the cyst stage is characterized by cellular quiescence, commonly resulting in human infection, and the lack of effective monotherapy after initial infection leads to chronic disease. Acanthamoeba can infect several human body tissues such as the skin, cornea, conjunctiva, respiratory tract, and reproductive tract, especially when the tissue barriers are damaged. Furthermore, serious infections can cause Acanthamoeba keratitis, granulomatous amoebic encephalitis, skin, and lung infections. With an increasing number of Acanthamoeba infections in recent years, the pathogenicity of Acanthamoeba is becoming more relevant to mainstream clinical care. This review article will describe the etiological characteristics of Acanthamoeba infection in detail from the aspects of biological characteristic, classification, disease, and pathogenic mechanism in order to provide scientific basis for the diagnosis, treatment, and prevention of Acanthamoeba infection.

Plant-Programmed Cell Death-Associated Genes Participation in Pinus sylvestris L. Trunk Tissue Formation

Molecular genetic markers of various PCD (programmed cell death) variants during xylo- and phloemogenesis have been identified for the first time in Scots pine under lingonberry pine forest conditions in Northwest Russia (middle taiga subzone). PCD is a genetically determined process. Gene profiles of serine and cysteine proteases (endopeptidases), endonucleases, and metacaspases families are often considered markers of the final xylogenesis stage. In the present study, we examined the gene expression profiles of the BFN (bifunctional endonuclease) family-BFN, BFN1, BFN2, BFN3, and peptidase (cysteine endopeptidase, CEP and metacaspase, MC5) in the radial row, in addition to the vascular phloem and cambium (F1), differentiating xylem (F2), sapwood (SW), and transition zone during the active cambial growth period of uneven-aged pine trees (25-, 63- and 164-cambial age (c.a.) years old). We have shown that the expression patterns of the PCD-related genes did not depend on the cambial age but were largely determined by plant tissue type. In the radial row F1-F2-SW, we studied the activities of enzymes, including sucrose in metabolism (sucrose synthase, three forms of invertase); antioxidant system (AOS) enzymes (superoxide dismutase, catalase); and peroxidase andpolyphenol oxidase, which belonged to AOS enzymes and were involved in the synthesis of phenolic components of cell walls. The activity of the enzymes indicated that the trunk tissues of pine trees had varying metabolic status. Molecular genetic PCD regulation mechanisms during xylem vascular and mechanical element formation and parenchyma cells' PCD during the formation of Scots pine heartwood were discussed.

An Extensive Review of Natural Polymers Used as Coatings for Postharvest Shelf-Life Extension: Trends and Challenges

Global demand for minimally processed fruits and vegetables is increasing due to the tendency to acquire a healthy lifestyle. Losses of these foods during the chain supply reach as much as 30%; reducing them represents a challenge for the industry and scientific sectors. The use of edible packaging based on biopolymers is an alternative to mitigate the negative impact of conventional films and coatings on environmental and human health. Moreover, it has been demonstrated that natural coatings added with functional compounds reduce the post-harvest losses of fruits and vegetables without altering their sensorial and nutritive properties. Furthermore, the enhancement of their mechanical, structural, and barrier properties can be achieved through mixing two or more biopolymers to form composite coatings and adding plasticizers and/or cross-linking agents. This review shows the latest updates, tendencies, and challenges in the food industry to develop eco-friendly food packaging from diverse natural sources, added with bioactive compounds, and their effect on perishable foods. Moreover, the methods used in the food industry and the new techniques used to coat foods such as electrospinning and electrospraying are also discussed. Finally, the tendency and challenges in the development of edible films and coatings for fresh foods are reviewed.

Reductive Amination Reaction for the Functionalization of Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) represent intriguing biopolymeric nanocrystalline materials, that are biocompatible, sustainable and renewable, can be chemically functionalized and are endowed with exceptional mechanical properties. Recently, studies have been performed to prepare CNCs with extraordinary photophysical properties, also by means of their functionalization with organic light-emitting fluorophores. In this paper, we used the reductive amination reaction to chemically bind 4-(1-pyrenyl)butanamine selectively to the reducing termini of sulfated or neutral CNCs (S_CNC and N_CNC) obtained from sulfuric acid or hydrochloric acid hydrolysis. The functionalization reaction is simple and straightforward, and it induces the appearance of the typical pyrene emission profile in the functionalized materials. After a characterization of the new materials performed by ATR-FTIR and fluorescence spectroscopies, we demonstrate luminescence quenching of the decorated N_CNC by copper (II) sulfate, hypothesizing for these new functionalized materials an application in water purification technologies.

Emerging Nanocellulose Technologies: Recent Developments

Nanocelluloses have unique morphologies, characteristics, and surface nanostructures, and are prepared from abundant and renewable plant biomass resources. Therefore, expansion of the use of CO₂ -accumulating nanocelluloses is expected to partly contribute to the establishment of a sustainable society and help overcome current global environmental issues. Nanocelluloses can be categorized into cellulose nanonetworks, cellulose nanofibrils, and cellulose nanocrystals, depending on their morphologies. All of these materials are first obtained as aqueous dispersions. In particular, cellulose nanofibrils have homogeneous ≈3 nm widths and average lengths of >500 nm, and significant amounts of charged groups are present on their surfaces. Such charged groups are formed by carboxymethylation, C6-carboxylation, phosphorylation, phosphite esterification, xanthation, sulfate esterification, and C2/C3 dicarboxylation during the pretreatment of plant cellulose fibers before their conversion into cellulose nanofibrils via mechanical disintegration in water. These surface-charged groups in nanocelluloses can be stoichiometrically counterion-exchanged into diverse metal and alkylammonium ions, resulting in surface-modified nanocelluloses with various new functions including hydrophobic, water-resistant, catalytic, superdeodorant, and gas-separation properties. However, many fundamental and application-related issues facing nanocelluloses must first be overcome to enable their further expansion.

Characterization of UDP-glucose dehydrogenase isoforms in the medicinal legume Glycyrrhiza uralensis

Uridine 5'-diphosphate (UDP)-glucose dehydrogenase (UGD) produces UDP-glucuronic acid from UDP-glucose as a precursor of plant cell wall polysaccharides. UDP-glucuronic acid is also a sugar donor for the glycosylation of various plant specialized metabolites. Nevertheless, the roles of UGDs in plant specialized metabolism remain poorly understood. Glycyrrhiza species (licorice), which are medicinal legumes, biosynthesize triterpenoid saponins, soyasaponins and glycyrrhizin, commonly glucuronosylated at the C-3 position of the triterpenoid scaffold. Often, several different UGD isoforms are present in plants. To gain insight into potential functional differences among UGD isoforms in triterpenoid saponin biosynthesis in relation to cell wall component biosynthesis, we identified and characterized Glycyrrhiza uralensis UGDs (GuUGDs), which were discovered to comprise five isoforms, four of which (GuUGD1-4) showed UGD activity in vitro. GuUGD1-4 had different biochemical properties, including their affinity for UDP-glucose, catalytic constant, and sensitivity to feedback inhibitors. GuUGD2 had the highest catalytic constant and highest gene expression level among the GuUGDs, suggesting that it is the major isoform contributing to the transition from UDP-glucose to UDP-glucuronic acid in planta. To evaluate the contribution of GuUGD isoforms to saponin biosynthesis, we compared the expression patterns of GuUGDs with those of saponin biosynthetic genes in methyl jasmonate (MeJA)-treated cultured stolons. GuUGD1-4 showed delayed responses to MeJA compared to those of saponin biosynthetic genes, suggesting that MeJA-responsive expression of GuUGDs compensates for the decreased UDP-glucuronic acid pool due to consumption during saponin biosynthesis.

Extensins: Self-Assembly, Crosslinking, and the Role of Peroxidases

The extensin (EXT) network is elaborated by the covalent intermolecular crosslinking of EXT glycoprotein monomers, and its proper assembly is important for numerous aspects of basic wall architecture and cellular defense. In this review, we discuss new advances in the secretion of EXT monomers and the molecular drivers of EXT network self-assembly. Many of the functions of EXTs are conferred through covalent crosslinking into the wall, so we also discuss the different types of known intermolecular crosslinks, the enzymes that are involved, as well as the potential for additional crosslinks that are yet to be identified. EXTs also function in wall architecture independent of crosslinking status, and therefore, we explore the role of non-crosslinking EXTs. As EXT crosslinking is upregulated in response to wounding and pathogen infection, we discuss a potential regulatory mechanism to control covalent crosslinking and its relationship to the subcellular localization of the crosslinking enzymes.

Three endogenous cellulases from termite, Reticulitermes speratus KMT001

Among termites, lower termites need symbiotic microorganisms in the digestive tract for digestion and cellulose metabolism. In this symbiotic relationship, the decomposition of cellulose is initiated by endoglucanase in termite salivary glands and completed by β-glycosidase of symbiotic microorganisms in the hindgut. The expression of β-glycosidase in lower termites has been reported in recent studies. The expression of two endoglucanases and one β-glycosidase gene related to cellulose degradation was identified in Reticulitermes speratus, a lower termite, through transcriptomic analysis. The proposed enzyme activities of three identified cellulose degradation genes were confirmed by heterologous expression in Escherichia coli. In addition to the endoglucanase expressed in the salivary gland, additional endoglucanase and β-glycosidase genes suggest that R. speratus performs the overall cellulose digestion using its own enzymes at all stages.

Characterization of an Amphiphilic Janus-Type Surface in the Cellulose Nanofibril Prepared by Aqueous Counter Collision

Cellulose nanofibrils, which attract extensive attention as a bio-based, sustainable, high-performance nanofibril, are believed to be predominantly hydrophilic. This study aimed to prove the presence of an amphiphilic "Janus-type fiber surface" in water with hydrophobic and hydrophilic faces in a cellulose nanofibril (ACC-CNF) that was prepared by the aqueous counter collision method. We clarified the surface characteristics of the ACC-CNF by confocal laser scanning microscopy with a carbohydrate-binding module and congo red probes for the hydrophobic planes on the cellulose fiber surfaces and calcofluor white as hydrophilic plane probes. The results indicated the presence of both characteristic planes on a single ACC-CNF surface, which verifies an amphiphilic Janus-type structure. Both hydrophobic probes adsorbed onto ACC-CNFs for the quantitative evaluation of the degree of ACC-CNF surface hydrophobicity by Langmuir's adsorption theory based on the optimal maximum adsorption amounts for various starting raw material types.

The loss of function of HEL, which encodes a cellulose synthase interactive protein, causes helical and vine-like growth of tomato

Helical growth is an economical way for plant to obtain resources. The classic microtubule-microfibril alignment model of Arabidopsis helical growth involves restriction of the appropriate orientation of cellulose microfibrils appropriately in the cell walls. However, the molecular mechanism underlying tomato helical growth remains unknown. Here, we identified a spontaneous tomato helical (hel) mutant with right-handed helical cotyledons and petals but left-handed helical stems and true leaves. Genetic analysis revealed that the hel phenotype was controlled by a single recessive gene. Using map-based cloning, we cloned the HEL gene, which encodes a cellulose interacting protein homologous to CSI1 of Arabidopsis. We identified a 27 bp fragment replacement that generated a premature stop codon. Transgenic experiments showed that the helical growth phenotype could be restored by the allele of this gene from wild-type Pyriforme. In contrast, the knockout mutation of HEL in Pyriforme via CRISPR/Cas9 resulted in helical growth. These findings shed light on the molecular control of the helical growth of tomato.

Identification of Candidate Genes Involved in Fruit Ripening and Crispness Retention Through Transcriptome Analyses of a 'Honeycrisp' Population

Crispness retention is a postharvest trait that fruit of the 'Honeycrisp' apple and some of its progeny possess. To investigate the molecular mechanisms of crispness retention, progeny individuals derived from a 'Honeycrisp' × MN1764 population with fruit that either retain crispness (named "Retain"), lose crispness (named "Lose"), or that are not crisp at harvest (named "Non-crisp") were selected for transcriptomic comparisons. Differentially expressed genes (DEGs) were identified using RNA-Seq, and the expression levels of the DEGs were validated using nCounter®. Functional annotation of the DEGs revealed distinct ripening behaviors between fruit of the "Retain" and "Non-crisp" individuals, characterized by opposing expression patterns of auxin- and ethylene-related genes. However, both types of genes were highly expressed in the fruit of "Lose" individuals and 'Honeycrisp', which led to the potential involvements of genes encoding auxin-conjugating enzyme (GH3), ubiquitin ligase (ETO), and jasmonate O-methyltransferase (JMT) in regulating fruit ripening. Cell wall-related genes also differentiated the phenotypic groups; greater numbers of cell wall synthesis genes were highly expressed in fruit of the "Retain" individuals and 'Honeycrisp' when compared with "Non-crisp" individuals and MN1764. On the other hand, the phenotypic differences between fruit of the "Retain" and "Lose" individuals could be attributed to the functioning of fewer cell wall-modifying genes. A cell wall-modifying gene, MdXTH, was consistently identified as differentially expressed in those fruit over two years in this study, so is a major candidate for crispness retention.

Metabolomics Reveals Distinct Metabolites between Lonicera japonica and Lonicera macranthoides Based on GC-MS

Lonicera japonica Thunb. (LJ) and Lonicera macranthoides Hand. -Mazz. (LM) have been widely used in Chinese medicine for thousands of years. Although the morphological characteristics of LJ and LM are quite similar, there are significant distinctions of medicinal ingredients (mainly the secondary metabolites) and clinical indications between them. However, the in-depth differences of primary metabolites have not thoroughly been studied yet. Therefore, gas chromatography-mass spectrometry- (GC-MS-) based metabolomics method combined with chemometric methods were performed to analyze the distinction in this study. The results showed that LJ and LM were obviously classified into two groups. 10 metabolites were obtained as biomarkers on account of their p values, pcorr values, and differing variable importance in projection (VIP) values. Metabolic pathway analysis showed that the galactose metabolism and starch and sucrose metabolism gathered as potential pathways caused these extraordinary differences of primary metabolites between LJ and LM. Further, we found that the differences of main medicinal ingredients between LJ and LM could be interpreted from these metabolites according to the analysis of mainly related pathways. The metabolites involved in the starch and sucrose metabolism presented upregulated in LJ, while almost all metabolites in the galactose metabolism, the TCA cycle, and the phenolic acid part of phenylpropanoid metabolism were downregulated in LJ. Therefore, the energy stored in the starch and sucrose metabolism may be saved to produce flavonoid, which could be the reason that the level of flavonoid of phenylpropanoid metabolism is higher in LJ compared to LM. Consequently, this study presented an effective tool for quality evaluation of LJ and LM and laid a foundation for further studies of the metabolic mechanisms and high-quality manufacturing of them.

Optimized culture conditions for bacterial cellulose production by Acetobacter senegalensis MA1

Background

Cellulose, the most versatile biomolecule on earth, is available in large quantities from plants. However, cellulose in plants is accompanied by other polymers like hemicellulose, lignin, and pectin. On the other hand, pure cellulose can be produced by some microorganisms, with the most active producer being Acetobacter xylinum. A. senengalensis is a gram-negative, obligate aerobic, motile coccus, isolated from Mango fruits in Senegal, capable of utilizing a variety of sugars and produce cellulose. Besides, the production is also influenced by other culture conditions. Previously, we isolated and identified A. senengalensis MA1, and characterized the bacterial cellulose (BC) produced.

Results

The maximum cellulose production by A. senengalensis MA1 was pre-optimized for different parameters like carbon, nitrogen, precursor, polymer additive, pH, temperature, inoculum concentration, and incubation time. Further, the pre-optimized parameters were pooled, and the best combination was analyzed by using Central Composite Design (CCD) of Response Surface Methodology (RSM). Maximum BC production was achieved with glycerol, yeast extract, and PEG 6000 as the best carbon and nitrogen sources, and polymer additive, respectively, at 4.5 pH and an incubation temperature of 33.5 °C. Around 20% of inoculum concentration gave a high yield after 30 days of inoculation. The interactions between culture conditions optimized by CCD included alterations in the composition of the HS medium with 50 mL L^− 1 of glycerol, 7.50 g L^− 1 of yeast extract at pH 6.0 by incubating at a temperature of 33.5 °C along with 7.76 g L^− 1 of PEG 6000. This gave a BC yield of wet weight as 469.83 g L^− 1.

Conclusion

The optimized conditions of growth medium resulted in enhanced production of bacterial cellulose by A. senegalensis MA1, which is around 20 times higher than that produced using an unoptimized HS medium. Further, the cellulose produced can be used in food and pharmaceuticals, for producing high-quality paper, wound dressing material, and nanocomposite films for food packaging.

Cellulose–water system’s state analysis by proton nuclear magnetic resonance and sorption measurements

Most cellulose-based materials’ manufacturing processes include processing this biopolymer in an aqueous medium. Sorption properties depend on cellulose supramolecular structure and nature of its change during moistening. Plenty of researchers’ efforts have been directed to the development of scientifically sound and commercially reliable processes over the past decade for the cellulose fibers’ dispersion in an aqueous medium. Therefore, it needs a more detailed study of the cellulose–water system components’ interaction. This study presents the supramolecular structure and sorption properties of native cotton cellulose research results obtained by 1H NMR relaxation, spectroscopy and sorption measurements. Hydrophilic properties of cellulose as an adsorbent are characterized, taking into account a porous system between its structural elements. We examine in detail water adsorption on the active surface of cellulose Iβ. We also demonstrate the approach for determining the entropy change in the first two layers of adsorbed water and estimate this value increased during adsorption. Cellulose moistening is accompanied by the decomposition of macrofibrils into microfibrils and is manifested in a crystallinity decrease and a specific surface area growth.

Cell wall O-acetyl and methyl esterification patterns of leaves reflected in atmospheric emission signatures of acetic acid and methanol

Plants emit high rates of methanol (meOH), generally assumed to derive from pectin demethylation, and this increases during abiotic stress. In contrast, less is known about the emission and source of acetic acid (AA). In this study, Populus trichocarpa (California poplar) leaves in different developmental stages were desiccated and quantified for total meOH and AA emissions together with bulk cell wall acetylation and methylation content. While young leaves showed high emissions of meOH (140 μmol m^-2) and AA (42 μmol m^-2), emissions were reduced in mature (meOH: 69%, AA: 60%) and old (meOH: 83%, AA: 76%) leaves. In contrast, the ratio of AA/meOH emissions increased with leaf development (young: 35%, mature: 43%, old: 82%), mimicking the pattern of O-acetyl/methyl ester ratios of leaf bulk cell walls (young: 35%, mature: 38%, old: 51%), which is driven by an increase in O-acetyl and decrease in methyl ester content with age. The results are consistent with meOH and AA emission sources from cell wall de-esterification, with young expanding tissues producing highly methylated pectin that is progressively demethyl-esterified. We highlight the quantification of AA/meOH emission ratios as a potential tool for rapid phenotype screening of structural carbohydrate esterification patterns.

Characterising the morphological characters and carbohydrate metabolism of oat culms and their association with lodging resistance

Lodging resistance can be improved by enhancing the mechanical strength of culms, and culm carbohydrates could improve this mechanical strength. Culm carbohydrates can regulate development of the culm and affect its toughness. The present study determines the relationship between lodging and carbohydrate content in oat culms. Field experiments were conducted in alpine regions in 2017 and 2018 using three oat varieties with different lodging resistance. Lodging-related morphological characteristics were directly determined and culm carbohydrate content and enzyme activity related to cellulose synthesis and sucrose metabolism were evaluated with ultraviolet spectrophotometry. Results showed that the lower the gravity height or the lower ratio of gravity height to plant height, the stronger the lodging resistance of the varieties. Higher culm nonstructural (NSC) and structural (SC) carbohydrate content contributed to the ability of culms to resist lodging, especially the content of cellulose and sucrose. PCA showed that sucrose metabolism and SC content were closely related to lodging resistance. Correlation analysis showed that the lodging index (LI) was significantly negatively correlated with NSC. Sucrose content was highly and significantly positively correlated with NSC. Additionally, the activities of sucrose phosphate synthase (SPS) and sucrose synthase (SS) were highly and significantly positively correlated with sucrose and cellulose content. The relationship between field characters and oat lodging, as well as the regulatory mechanism of carbohydrate content on lodging resistance of the culm are discussed.

An EMS-induced mutation in a tetratricopeptide repeat-like superfamily protein gene (Ghir_A12G008870) on chromosome A12 is responsible for the liy short fiber phenotype in cotton

The EMS-induced threonine/isoleucine substitution in a tetratricopeptide repeat-like superfamily protein encoded by gene Ghir_A12G008870 is responsible for the Ligon-lintless-y (li_y) short fiber phenotype in cotton. A short fiber mutant Ligon-lintless-y was created through treating the seeds of the cotton line MD15 with ethyl methanesulfonate. Genetic analysis indicated that the short fiber phenotype is controlled by a single recessive locus designated li_y. From F₂ populations derived from crosses between the mutant and its wild type (WT), we selected 132 short fiber progeny (li_y/li_y) and made two DNA bulks. We sequenced these DNA bulks along with the two parents of the population. The li_y locus was located on chromosome A12. Using multiple F₂ populations and F₃ progeny plants, we mapped the li_y locus within a genomic region of 1.18 Mb. In this region, there is only one gene, i.e., Ghir_A12G008870 encoding a tetratricopeptide repeat-like superfamily protein that has a non-synonymous mutation between the li_y mutant and its WT. Analysis of a SNP marker representing this gene in the F₂ and F₃ progeny plants demonstrated its complete linkage with the li_y short fiber phenotype. We further analyzed this SNP marker in a panel of 384 cotton varieties. The mutant allele is absent in all varieties analyzed. RNAseq and RT-qPCR analysis of the gene Ghir_A12G008870 during fiber development showed a significant expression difference between the li_y mutant and its WT in developing fiber cells beginning at 12 days post-anthesis. Virus-induced gene silencing of the gene Ghir_A12G008870 significantly reduced the fiber length of the WT cotton line MD15. Taken together, our results suggest that the gene Ghir_A12G008870 is involved in the cotton fiber cell elongation process and is a promising candidate gene responsible for the li_y short fiber phenotype.

Overexpression of a Sucrose Synthase Gene Indirectly Improves Cotton Fiber Quality Through Sucrose Cleavage

The study aims to improve fiber traits of local cotton cultivar through genetic transformation of sucrose synthase (SuS) gene in cotton. Sucrose synthase (SuS) is an important factor that is involved in the conversion of sucrose to fructose and UDP-glucose, which are essential for the synthesis of cell wall cellulose. In the current study, we expressed a synthetic SuS gene in cotton plants under the control of a CaMV35S promoter. Amplification of an 813-bp fragment using gene-specific primers confirmed the successful introduction of SuS gene into the genome of cotton variety CEMB-00. High SuS mRNA expression was observed in two transgenic cotton plants, MA0023 and MA0034, when compared to the expression in two other transgenic cotton plants, MA0035 and MA0038. Experiments showed that SuS mRNA expression was positively correlated with SuS activity at the vegetative (54%) and reproductive stages (40%). Furthermore, location of transgene was found to be at chromosome no. 9 in the form of single insertion, while no signal was evident in non-transgenic control cotton plant when evaluated through fluorescent in situ hybridization and karyotyping analysis. Fiber analyses of the transgenic cotton plants showed increases of 11.7% fiber length, 18.65% fiber strength, and up to 5% cellulose contents. An improvement in the micronaire value of 4.21 was also observed in the MA0038 transgenic cotton line. Scanning electron microscopy (SEM) revealed that the fibers of the SuS transgenic cotton plants were highly spiral with a greater number of twists per unit length than the fibers of the non-transgenic control plants. These results determined that SuS gene expression influenced cotton fiber structure and quality, suggesting that SuS gene has great potential for cotton fiber quality improvement.

Molecular aspects of bacterial nanocellulose biosynthesis

Bacterial nanocellulose (BNC) produced by aerobic bacteria is a biopolymer with sophisticated technical properties. Although the potential for economically relevant applications is huge, the cost of BNC still limits its application to a few biomedical devices and the edible product Nata de Coco, made available by traditional fermentation methods in Asian countries. Thus, a wider economic relevance of BNC is still dependent on breakthrough developments on the production technology. On the other hand, the development of modified strains able to overproduce BNC with new properties - e.g. porosity, density of fibres crosslinking, mechanical properties, etc. - will certainly allow to overcome investment and cost production issues and enlarge the scope of BNC applications. This review discusses current knowledge about the molecular basis of BNC biosynthesis, its regulations and, finally, presents a perspective on the genetic modification of BNC producers made possible by the new tools available for genetic engineering.

Knockdown of Dinoflagellate Cellulose Synthase CesA1 Resulted in Malformed Intracellular Cellulosic Thecal Plates and Severely Impeded Cyst-to-Swarmer Transition

Cellulose synthesis (CS) is conducted by membrane-bound cellulose synthase complexes (CSCs), containing cellulose synthases (CesA), that are either arranged in hexagonal structures in higher plants or in linear arrays in most microbial organisms, including dinoflagellates. Dinoflagellates are a major phytoplankton group having linear-type CSCs and internal cellulosic thecal plates (CTPs) in large cortical vesicles. Immunological study suggested CesA1p were cortically localized to the periphery of CTPs. During cyst-to-swarmer transition (T_C–S), synchronized peaks of CesA1 transcription, CesA1p expression, CS and CTP formation occurred in respective order, over 12–16 h, strategically allowing the study of CS regulation and CTP biogenesis. CesA1-knockdown resulted in 40% reduction in CesA1p level and time required for swarmer cells reappearance. CTPs were severely malformed with reduced cellulose content. As CTPs are deposited in internal organelle, the present study demonstrated dinoflagellate CesA1 ortholog was adapted for non-surface deposition; this is different to paradigm of other CesAps which require plasmamembrane for cellulose fiber deposition. This pioneer gene-knockdown study demonstrated the requirement of a gene for dinoflagellate cell wall remodeling and proper T_C–S, which are prominent in dinoflagellate life-cycles.

Cellulose fibrils formation and organisation of cytoskeleton during encystment are essential for Acanthamoeba cyst wall architecture

Acanthamoebae success as human pathogens is largely due to the highly resistant cysts which represent a crucial problem in treatment of Acanthamoeba infections. Hence, the study of cyst wall composition and encystment play an important role in finding new therapeutic strategies. For the first time, we detected high activity of cytoskeletal elements - microtubular networks and filamentous actin, in late phases of encystment. Cellulose fibrils - the main components of endocyst were demonstrated in inter-cystic space, and finally in the ectocyst, hereby proving the presence of cellulose in both layers of the cyst wall. We detected clustering of intramembranous particles (IMPs) and their density alterations in cytoplasmic membrane during encystment. We propose a hypothesis that in the phase of endocyst formation, the IMP clusters represent cellulose microfibril terminal complexes involved in cellulose synthesis that after cyst wall completion are reduced. Cyst wall impermeability, due largely to a complex polysaccharide (glycans, mainly cellulose) has been shown to be responsible for Acanthamoeba biocide resistance and cellulose biosynthesis pathway is suggested to be a potential target in treatment of Acanthamoeba infections. Disruption of this pathway would affect the synthesis of cyst wall and reduce considerably the resistance to chemotherapeutic agents.

Study of The Reaction Mechanism to Produce Nanocellulose-Graft-Chitosan Polymer

Cellulose and chitin are the most abundant polymeric materials in nature, capable of replacing conventional synthetic polymers. From them, cellulose nano/microfibers (CNFs/CMFs) and chitosan are obtained. Both polymers have been used separately in graft copolymerization but there are not many studies on the use of cellulose and chitosan together as copolymers and the reaction mechanism is unknown. In this work, the reaction mechanism to produce nano/microcellulose-graft-chitosan polymer has been studied. Recycled cellulose pulp was used, with and without a 2,2,6,6-tetramethylpiperidin-1-oxyl-radical (TEMPO)-mediated oxidation pretreatment, to produce CNFs and CMFs, respectively. For chitosan, a low-molecular weight product dissolved in an acetic acid solution was prepared. Grafted polymers were synthesized using a microwave digester. Results showed that TEMPO-mediated oxidation as the cellulose pretreatment is a key factor to obtain the grafted polymer CNF-g-CH. A reaction mechanism has been proposed where the amino group of chitosan attacks the carboxylic group of oxidized cellulose, since non-oxidized CMFs do not achieve the desired grafting. 13C NMR spectra, elemental analysis and SEM images validated the proposed mechanism. Finally, CNF-g-CH was used as a promising material to remove water-based inks and dyes from wastewater.

Cellulose synthase complexes display distinct dynamic behaviors during xylem transdifferentiation

In plants, plasma membrane-embedded CELLULOSE SYNTHASE (CESA) enzyme complexes deposit cellulose polymers into the developing cell wall. Cellulose synthesis requires two different sets of CESA complexes that are active during cell expansion and secondary cell wall thickening, respectively. Hence, developing xylem cells, which first undergo cell expansion and subsequently deposit thick secondary walls, need to completely reorganize their CESA complexes from primary wall- to secondary wall-specific CESAs. Using live-cell imaging, we analyzed the principles underlying this remodeling. At the onset of secondary wall synthesis, the primary wall CESAs ceased to be delivered to the plasma membrane and were gradually removed from both the plasma membrane and the Golgi. For a brief transition period, both primary wall- and secondary wall-specific CESAs coexisted in banded domains of the plasma membrane where secondary wall synthesis is concentrated. During this transition, primary and secondary wall CESAs displayed discrete dynamic behaviors and sensitivities to the inhibitor isoxaben. As secondary wall-specific CESAs were delivered and inserted into the plasma membrane, the primary wall CESAs became concentrated in prevacuolar compartments and lytic vacuoles. This adjustment in localization between the two CESAs was accompanied by concurrent decreased primary wall CESA and increased secondary wall CESA protein abundance. Our data reveal distinct and dynamic subcellular trafficking patterns that underpin the remodeling of the cellulose biosynthetic machinery, resulting in the removal and degradation of the primary wall CESA complex with concurrent production and recycling of the secondary wall CESAs.

Short genome report of cellulose-producing commensal Escherichia coli 1094

Bacterial surface colonization and biofilm formation often rely on the production of an extracellular polymeric matrix that mediates cell-cell and cell-surface contacts. In Escherichia coli and many Betaproteobacteria and Gammaproteobacteria cellulose is often the main component of the extracellular matrix. Here we report the complete genome sequence of the cellulose producing strain E. coli 1094 and compare it with five other closely related genomes within E. coli phylogenetic group A. We present a comparative analysis of the regions encoding genes responsible for cellulose biosynthesis and discuss the changes that could have led to the loss of this important adaptive advantage in several E. coli strains. Data deposition: The annotated genome sequence has been deposited at the European Nucleotide Archive under the accession number PRJEB21000.

Genomic prediction applied to high-biomass sorghum for bioenergy production

The increasing cost of energy and finite oil and gas reserves have created a need to develop alternative fuels from renewable sources. Due to its abiotic stress tolerance and annual cultivation, high-biomass sorghum (Sorghum bicolor L. Moench) shows potential as a bioenergy crop. Genomic selection is a useful tool for accelerating genetic gains and could restructure plant breeding programs by enabling early selection and reducing breeding cycle duration. This work aimed at predicting breeding values via genomic selection models for 200 sorghum genotypes comprising landrace accessions and breeding lines from biomass and saccharine groups. These genotypes were divided into two sub-panels, according to breeding purpose. We evaluated the following phenotypic biomass traits: days to flowering, plant height, fresh and dry matter yield, and fiber, cellulose, hemicellulose, and lignin proportions. Genotyping by sequencing yielded more than 258,000 single-nucleotide polymorphism markers, which revealed population structure between subpanels. We then fitted and compared genomic selection models BayesA, BayesB, BayesCπ, BayesLasso, Bayes Ridge Regression and random regression best linear unbiased predictor. The resulting predictive abilities varied little between the different models, but substantially between traits. Different scenarios of prediction showed the potential of using genomic selection results between sub-panels and years, although the genotype by environment interaction negatively affected accuracies. Functional enrichment analyses performed with the marker-predicted effects suggested several interesting associations, with potential for revealing biological processes relevant to the studied quantitative traits. This work shows that genomic selection can be successfully applied in biomass sorghum breeding programs.

Rice matrix metalloproteinase OsMMP1 plays pleiotropic roles in plant development and symplastic-apoplastic transport by modulating cellulose and callose depositions

Matrix metalloproteinases (MMPs) are well-known proteolytic enzymes in animal systems and play roles in tissue differentiation, growth, and defence. Although a few plant MMPs have been reported, their exact functions in development and growth remain elusive. In this study, we characterized the promoter and coding sequence of OsMMP1, one of the putative MMP genes in rice (Oryza sativa). The OsMMP1 catalytic domain is structurally similar to human MMPs with respect to cofactor orientation as predicted by homology modeling. Bacterially expressed recombinant OsMMP1 showed protease activity with bovine serum albumin and gelatin as substrates. Analyses of transcript accumulation and promoter-reporter gene expression revealed that OsMMP1 is spatio-temporally expressed in vegetative and reproductive parts of plants. The plasma membrane-localized OsMMP1 protease affected plant development upon heterologous expression in tobacco and endogenous gene silencing in rice. Transgenic tobacco plants expressing OsMMP1 showed enhanced deposition of cellulose and callose, leading to impairment of symplastic and apoplastic translocations. Moreover, transgenic tobacco tissues exhibited tolerance to oxidative stress-inducing agent by confining the area of tissue death owing to callose lining. Collectively, these findings demonstrate the involvement of a plant MMP in growth, organ differentiation, and development in relation to cell wall modification.

Development of completely dispersed cellulose nanofibers

Plant cellulose fibers of width and length ∼0.03 mm and ∼3 mm, respectively, can be completely converted to individual cellulose nanofibers of width and length ∼3 nm and ∼1 µm, respectively, by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation under aqueous conditions and subsequent gentle mechanical disintegration of the oxidized cellulose in water. The obtained TEMPO-oxidized cellulose nanofibers (TOCNs) are new bio-based, crystalline nanomaterials with applications in the high-tech and commodity product industries. Sodium carboxylate groups, which are densely, regularly, and position-selectively present on the crystalline TOCN surfaces, can be efficiently ion-exchanged with other metal and alkylammonium carboxylate groups in water to control the biodegradable/stable and hydrophilic/hydrophobic properties of the TOCNs. TOCNs are therefore promising nanomaterials that can be prepared from the abundant wood biomass resources present in Japan. Increased production and use of TOCNs would stimulate a new material stream from forestry to industries, helping to establish a sustainable society based on wood biomass resources.

Production and Status of Bacterial Cellulose in Biomedical Engineering

Bacterial cellulose (BC) is a highly pure and crystalline material generated by aerobic bacteria, which has received significant interest due to its unique physiochemical characteristics in comparison with plant cellulose. BC, alone or in combination with different components (e.g., biopolymers and nanoparticles), can be used for a wide range of applications, such as medical products, electrical instruments, and food ingredients. In recent years, biomedical devices have gained important attention due to the increase in medical engineering products for wound care, regeneration of organs, diagnosis of diseases, and drug transportation. Bacterial cellulose has potential applications across several medical sectors and permits the development of innovative materials. This paper reviews the progress of related research, including overall information about bacterial cellulose, production by microorganisms, mechanisms as well as BC cultivation and its nanocomposites. The latest use of BC in the biomedical field is thoroughly discussed with its applications in both a pure and composite form. This paper concludes the further investigations of BC in the future that are required to make it marketable in vital biomaterials.

Potential Applications of Nanocellulose-Containing Materials in the Biomedical Field

Because of its high biocompatibility, bio-degradability, low-cost and easy availability, cellulose finds application in disparate areas of research. Here we focus our attention on the most recent and attractive potential applications of cellulose in the biomedical field. We first describe the chemical/structural composition of cellulose fibers, the cellulose sources/features and cellulose chemical modifications employed to improve its properties. We then move to the description of cellulose potential applications in biomedicine. In this field, cellulose is most considered in recent research in the form of nano-sized particle, i.e., nanofiber cellulose (NFC) or cellulose nanocrystal (CNC). NFC is obtained from cellulose via chemical and mechanical methods. CNC can be obtained from macroscopic or microscopic forms of cellulose following strong acid hydrolysis. NFC and CNC are used for several reasons including the mechanical properties, the extended surface area and the low toxicity. Here we present some potential applications of nano-sized cellulose in the fields of wound healing, bone-cartilage regeneration, dental application and different human diseases including cancer. To witness the close proximity of nano-sized cellulose to the practical biomedical use, examples of recent clinical trials are also reported. Altogether, the described examples strongly support the enormous application potential of nano-sized cellulose in the biomedical field.

Cell Cycle-Dependent Expression Dynamics of G1/S Specific Cyclin, Cellulose Synthase and Cellulase in the Dinoflagellate Prorocentrum donghaiense

Dinoflagellates undergo a typical eukaryotic cell cycle consisting of G1, S, G2, and M phases and some of the typical cell cycle related genes have been computationally identified. However, very few of these genes have been experimentally linked to the cell cycle phases. Besides, although thecate dinoflagellates are known to possess theca composed of cellulose, information on cellulose synthesis and degradation associated with the cell cycle is also limited. In this study, we isolated G1/S cyclin, cellulose synthase and cellulase encoding genes in dinoflagellate Prorocentrum donghaiense. Further, using reverse transcription quantitative PCR (RT-qPCR), we characterized the expression profiles of the three genes throughout the cell cycle. All three showed clear expression dynamics throughout the cell cycle, with fold changes of 26, 2.4 and 9.3 for G1/S cyclin, cellulose synthase and cellulase gene, respectively. The transcript abundance of G1/S cyclin increased in late G1 phase and dropped in early S phase, indicating that this protein is involved in the G1/S transition. Throughout the cell cycle, the average transcript level of cellulose synthase was 4.5-fold higher than that of cellulase. Cellulose synthase and cellulase gene expressions showed peak transcript abundances at middle G1 phase and G2M phase, respectively, indicating the respective roles of these enzymes in the growth of newly divided cells and in cytokinesis. Our results suggest that G1/S cyclin, cellulase, and cellulose synthase genes associated with G1/S transition, G2M, and G1 phases of the cell cycle and are candidates of biomarkers for assessing growth status of P. donghaiense.

Characterisation of Arabidopsis calnexin 1 and calnexin 2 in the endoplasmic reticulum and at plasmodesmata

Calnexin (CNX) is a highly conserved endoplasmic reticulum (ER) chaperone protein. Both calnexin and the homologous ER-lumenal protein, calreticulin, bind calcium ions and participate in protein folding. There are two calnexins in Arabidopsis thaliana, CNX1 and CNX2. GUS expression demonstrated that these are expressed in most Arabidopsis tissues throughout development. Calnexin transfer DNA (T-DNA) mutant lines exhibited increased transcript abundances of a number of other ER chaperones, including calreticulins, suggesting a degree of redundancy. CNX1 and CNX2 localised to the ER membrane including that within plasmodesmata, the intercellular channels connecting plant cells. This is comparable with the previous localisations of calreticulin in the ER lumen and at plasmodesmata. However, from green fluorescent protein (GFP) diffusion studies in single and double T-DNA insertion mutant lines, as well as overexpression lines, we found no evidence that CNX1 or CNX2 play a role in intercellular transport through plasmodesmata. In addition, calnexin T-DNA mutant lines showed no change in transcript abundance of a number of plasmodesmata-related proteins. CNX1 and CNX2 do not appear to have a specific localisation or function at plasmodesmata-rather the association of calnexin with the ER is simply maintained as the ER passes through plasmodesmata.

Enzyme-Less Growth in Chara and Terrestrial Plants

Enzyme-less chemistry appears to control the growth rate of the green alga Chara corallina. The chemistry occurs in the wall where a calcium pectate cycle determines both the rate of wall enlargement and the rate of pectate deposition into the wall. The process is the first to indicate that a wall polymer can control how a plant cell enlarges after exocytosis releases the polymer to the wall. This raises the question of whether other species use a similar mechanism. Chara is one of the closest relatives of the progenitors of terrestrial plants and during the course of evolution, new wall features evolved while pectate remained one of the most conserved components. In addition, charophytes contain auxin which affects Chara in ways resembling its action in terrestrial plants. Therefore, this review considers whether more recently acquired wall features require different mechanisms to explain cell expansion.

Effects of Soil Salinity on Sucrose Metabolism in Cotton Fiber

Cotton (Gosspium hirsutum L.) is classified as a salt tolerant crop. However, its yield and fiber quality are negatively affected by soil salinity. Studies on the enzymatic differences in sucrose metabolism under different soil salinity levels are lacking. Therefore, field experiments, using two cotton cultivars, CCRI-79 (salt-tolerant) and Simian 3 (salt-sensitive), were conducted in 2013 and 2014 at three different salinity levels (1.15 dS m^-1 [low soil salinity], 6.00 dS m^-1 [medium soil salinity], and 11.46 dS m^-1 [high soil salinity]). The objective was to elucidate the effects of soil salinity on sucrose content and the activity of key enzymes that are related to sucrose metabolism in cotton fiber. Results showed that as the soil salinity increased, cellulose content, sucrose content, and sucrose transformation rate declined; the decreases in cellulose content and sucrose transformation rate caused by the increase in soil salinity were more in Simian 3 than those in CCRI-79. With increase in soil salinity, activities of sucrose metabolism enzymes sucrose phophate synthase (SPS), acidic invertase, and alkaline invertase were decreased, whereas sucrose synthase (SuSy) activity increased. However, the changes displayed in the SuSy and SPS activities in response to increase in soil salinity were different and the differences were large between the two cotton cultivars. These results illustrated that suppressed cellulose synthesis and sucrose metabolism under high soil salinity were mainly due to the change in SPS, SuSy, and invertase activities, and the difference in cellulose synthesis and sucrose metabolism in fiber for the two cotton cultivars in response to soil salinity was determined mainly by both SuSy and SPS activities.

Proteomic profiling of cellulase-aid-extracted membrane proteins for functional identification of cellulose synthase complexes and their potential associated- components in cotton fibers

Cotton fibers are an excellent model for understanding of cellulose biosynthesis in higher plants. In this study, we determined a high cellulose biosynthesis activity in vitro by optimizing biochemical reaction conditions in cotton fibers. By adding a commercial cellulase enzyme into fibers extraction process, we extracted markedly higher levels of GhCESA1 and GhCESA8 proteins and observed an increase in β-1,4-glucan and β-1,3-glucan products in vitro. LC-MS/MS analysis of anti-GhCESA8-immunoprecipitated proteins showed that 19 proteins could be found in three independent experiments including four CESAs (GhCESA1,2,7,8), five well-known non-CESA proteins, one callose synthase (CALS) and nine novel proteins. Notably, upon the cellulase treatment, four CESAs, one CALS and four novel proteins were measured at relatively higher levels by calculating total peptide counts and distinct peptide numbers, indicating that the cellulase-aid-extracted proteins most likely contribute to the increase in β-glucan products in vitro. These results suggest that the cellulase treatment may aid to release active cellulose synthases complexes from growing glucan chains and make them more amenable to extraction. To our knowledge, it is the first time report about the functional identification of the potential proteins that were associated with plant cellulose and callose synthases complexes by using the cellulase-aided protein extraction.

Hierarchical architecture of bacterial cellulose and composite plant cell wall polysaccharide hydrogels using small angle neutron scattering

Small angle neutron scattering (SANS) has been applied to characterise the structure of pure bacterial cellulose hydrogels, and composites thereof, with two plant cell wall polysaccharides (arabinoxylan and xyloglucan). Conventional published models, which assume that bacterial cellulose ribbons are solid one-phase systems, fail to adequately describe the SANS data of pure bacterial cellulose. Fitting of the neutron scattering profiles instead suggests that the sub-structure of cellulose microfibrils contained within the ribbons results in the creation of regions with distinct values of neutron scattering length density, when the hydrogels are subjected to H2O/D2O exchange. This may be represented within a core-shell formalism that considers the cellulose ribbons to comprise a core containing impermeable crystallites surrounded by a network of paracrystalline cellulose and tightly bound water, and a shell containing only paracrystalline cellulose and water. Accordingly, a fitting function comprising the sum of a power-law term to account for the large scale structure of intertwined ribbons, plus a core-shell cylinder with polydisperse radius, has been applied; it is demonstrated to simultaneously describe all SANS contrast variation data of pure and composite bacterial cellulose hydrogels. In addition, the resultant fitting parameters indicate distinct interaction mechanisms of arabinoxylan and xyloglucan with cellulose, revealing the potential of this approach to investigate the role of different plant cell wall polysaccharides on the biosynthesis process of cellulose.

Tissue-specific gene expression in maize seeds during colonization by Aspergillus flavus and Fusarium verticillioides

Aspergillus flavus and Fusarium verticillioides are fungal pathogens that colonize maize kernels and produce the harmful mycotoxins aflatoxin and fumonisin, respectively. Management practice based on potential host resistance to reduce contamination by these mycotoxins has proven difficult, resulting in the need for a better understanding of the infection process by these fungi and the response of maize seeds to infection. In this study, we followed the colonization of seeds by histological methods and the transcriptional changes of two maize defence-related genes in specific seed tissues by RNA in situ hybridization. Maize kernels were inoculated with either A. flavus or F. verticillioides 21-22 days after pollination, and harvested at 4, 12, 24, 48, 72, 96 and 120 h post-inoculation. The fungi colonized all tissues of maize seed, but differed in their interactions with aleurone and germ tissues. RNA in situ hybridization showed the induction of the maize pathogenesis-related protein, maize seed (PRms) gene in the aleurone and scutellum on infection by either fungus. Transcripts of the maize sucrose synthase-encoding gene, shrunken-1 (Sh1), were observed in the embryo of non-infected kernels, but were induced on infection by each fungus in the aleurone and scutellum. By comparing histological and RNA in situ hybridization results from adjacent serial sections, we found that the transcripts of these two genes accumulated in tissue prior to the arrival of the advancing pathogens in the seeds. A knowledge of the patterns of colonization and tissue-specific gene expression in response to these fungi will be helpful in the development of resistance.

Effects of elevated temperature on sucrose metabolism and cellulose synthesis in cotton fibre during secondary cell wall development

Global warming has the potential to increase air temperatures by 1.8 to 4.0°C by the end of the 21st century. In order to reveal the effects of increased temperatures on the sucrose metabolism and cellulose synthesis in cotton fibre during its flowering and boll formation stage, field experiments with elevated temperature regimes (32.6/28.6°C, mean daytime/night-time temperature during flowering and boll formation stage during 2010-12, the same below) and ambient temperature regimes (30.1/25.8°C) were conducted. Activities of sucrose synthase and acid/alkaline invertase decreased under elevated temperature in fibre, but activities of sucrose phosphate synthase were increased. Callose content increased, but sucrose content decreased within the cotton fibre under elevated temperature. The disparity of callose content and sucrose content between the two temperature regimes decreased with the number of days post anthesis, indicating that the effects of elevated temperature on both sucrose content and cellulose content were diminished as the boll matured. Due to the dynamics of the carbohydrate content and associated enzyme activities, we hypothesise that the restrained sucrose metabolism and cellulose biosynthesis under elevated temperatures were mainly attributed to the changed activities of sucrose synthase and invertase. Furthermore, 32.6/28.6°C had a negative effect on the cellulose synthesis compared with 30.1/25.8°C.

Genome Regions Associated with Functional Performance of Soybean Stem Fibers in Polypropylene Thermoplastic Composites

Plant fibers can be used to produce composite materials for automobile parts, thus reducing plastic used in their manufacture, overall vehicle weight and fuel consumption when they replace mineral fillers and glass fibers. Soybean stem residues are, potentially, significant sources of inexpensive, renewable and biodegradable natural fibers, but are not curretly used for biocomposite production due to the functional properties of their fibers in composites being unknown. The current study was initiated to investigate the effects of plant genotype on the performance characteristics of soybean stem fibers when incorporated into a polypropylene (PP) matrix using a selective phenotyping approach. Fibers from 50 lines of a recombinant inbred line population (169 RILs) grown in different environments were incorporated into PP at 20% (wt/wt) by extrusion. Test samples were injection molded and characterized for their mechanical properties. The performance of stem fibers in the composites was significantly affected by genotype and environment. Fibers from different genotypes had significantly different chemical compositions, thus composites prepared with these fibers displayed different physical properties. This study demonstrates that thermoplastic composites with soybean stem-derived fibers have mechanical properties that are equivalent or better than wheat straw fiber composites currently being used for manufacturing interior automotive parts. The addition of soybean stem residues improved flexural, tensile and impact properties of the composites. Furthermore, by linkage and in silico mapping we identified genomic regions to which quantitative trait loci (QTL) for compositional and functional properties of soybean stem fibers in thermoplastic composites, as well as genes for cell wall synthesis, were co-localized. These results may lead to the development of high value uses for soybean stem residue.

RNA-Seq-based transcriptome analysis of stem development and dwarfing regulation in Agapanthus praecox ssp. orientalis (Leighton) Leighton

Agapanthus praecox is a monocotyledonous ornamental bulb plant. Generally, the scape (inflorescence stem) length can develop more than 1m, however application 400 mg·L(-1) paclobutrazol can shorten the length beyond 70%. To get a deeper insight into its dwarfism mechanism, de novo RNA-Seq technology has been employed, for the first time, to describe the scape transcriptome of A. praecox. We got 71,258 assembled unigenes, and 45,597 unigenes obtained protein functional annotation. Take the above sequencing results as a reference gene set, using RNA-seq (quantification) technology analyzed gene expression profiles between the control and paclobutrazol-treated samples, and screened 2838 differentially expressed genes. GO, KEGG and MapMan pathway analyses indicated that these differentially expressed genes were significantly enriched in response to stimulus, hormonal signaling, carbohydrate metabolism, cell wall, cell size, and cell cycle related biological process. To validate the expression profiles obtained by RNA-Seq, real-time qPCR was performed on 24 genes selected from key significantly enriched pathways. Comprehensive analysis suggested that paclobutrazol blocks GA signal that can effectively inhibit scape elongation; the GA signal interact with other hormonal signals including auxin, ethylene, brassinosteroid and cytokinins, and trigger downstream signaling cascades leading to metabolism, cell wall biosynthesis, cell division and the cycle decreased obviously, and finally induced dwarfism trait. Furthermore, AP2/EREBP, bHLH, C2H2, ARR, WRKY and ARF family's transcription factors were involved in the regulation of scape development in A. praecox. This transcriptome dataset will serve as an important public information platform to accelerate research on the gene expression and functional genomics of Agapanthus.

Overexpression of poplar xylem sucrose synthase in tobacco leads to a thickened cell wall and increased height

Sucrose synthase (SuSy) is considered the first key enzyme for secondary growth because it is a highly regulated cytosolic enzyme that catalyzes the reversible conversion of sucrose and UDP into UDP-glucose and fructose. Although SuSy enzymes preferentially functions in the direction of sucrose cleavage at most cellular condition, they also catalyze the synthetic reaction. We isolated a gene that encodes a SuSy from Populus simonii×Populus nigra and named it PsnSuSy2 because it shares high similarity to SuSy2 in Populus trichocarpa. RT-PCR revealed that PsnSuSy2 was highly expressed in xylem, but lowly expressed in young leaves. To characterize its functions in secondary growth, multiple tobacco overexpression transgenic lines of PnsSuSy2 were generated via Agrobacterium-mediated transformation. The PsnSuSy2 expression levels and altered wood properties in stem segments from the different transgenic lines were carefully characterized. The results demonstrated that the levels of PsnSuSy2 enzyme activity, chlorophyll content, total soluble sugars, fructose and glucose increased significantly, while the sucrose level decreased significantly. Consequently, the cellulose content and fiber length increased, whereas the lignin content decreased, suggesting that PsnSuSy2 plays a significant role in cleaving sucrose into UDP-glucose and fructose to facilitate cellulose biosynthesis and that promotion of cellulose biosynthesis suppresses lignin biosynthesis. Additionally, the noticeable increase in the lodging resistance in transgenic tobacco stem suggested that the cell wall characteristics were altered by PsnSuSy2 overexpression. Scanning electron microscopy was performed to study the cell wall morphology of stem, and surprisingly, we found that the secondary cell wall was significantly thicker in transgenic tobacco. However, the thickened secondary cell wall did not negatively affect the height of the plants because the PsnSuSy2- overexpressing lines grew taller than the wildtype plants. This systematic analysis demonstrated that PsnSuSy2 plays an important role in cleaving sucrose coupled with cellulose biosynthesis in wood tissue.

Application of X-ray and neutron small angle scattering techniques to study the hierarchical structure of plant cell walls: a review

Plant cell walls present an extremely complex structure of hierarchically assembled cellulose microfibrils embedded in a multi-component matrix. The biosynthesis process determines the mechanism of cellulose crystallisation and assembly, as well as the interaction of cellulose with other cell wall components. Thus, a knowledge of cellulose microfibril and bundle architecture, and the structural role of matrix components, is crucial for understanding cell wall functional and technological roles. Small angle scattering techniques, combined with complementary methods, provide an efficient approach to characterise plant cell walls, covering a broad and relevant size range while minimising experimental artefacts derived from sample treatment. Given the system complexity, approaches such as component extraction and the use of plant cell wall analogues are typically employed to enable the interpretation of experimental results. This review summarises the current research status on the characterisation of the hierarchical structure of plant cell walls using small angle scattering techniques.

Live cell imaging of the cytoskeleton and cell wall enzymes in plant cells

The use of live imaging techniques to visualize the dynamic changes and interactions within plant cells has given us detailed information on the function and organization of the cytoskeleton and cell wall associated proteins. This information has grown with the constant improvement in imaging hardware and molecular tools. In this chapter, we describe the procedure for the preparation and live visualization of fluorescent protein fusions associated with the cytoskeleton and the cell wall in Arabidopsis.

Isolation of developing secondary xylem specific cellulose synthase genes and their expression profiles during hormone signalling in Eucalyptus tereticornis

Cellulose synthases (CesA) represent a group of β-1, 4 glycosyl transferases involved in cellulose biosynthesis. Recent reports in higher plants have revealed that two groups of CesA gene families exist, which are associated with either primary or secondary cell wall deposition. The present study aimed at identifying developing secondary xylem specific cellulose synthase genes from Eucalyptus tereticornis, a species predominantly used in paper and pulp industries in the tropics. The differential expression analysis of the three EtCesA genes using qRT-PCR revealed 49 to 87 fold relative expression in developing secondary xylem tissues. Three full length gene sequences of EtCesA1, EtCesA2 and EtCesA3 were isolated with the size of 2940, 3114 and 3123 bp, respectively. Phytohormone regulation of all three EtCesA genes were studied by exogenous application of gibberellic acid, naphthalene acetic acid, indole acetic acid and 2, 4-epibrassinolide in internode tissues derived from three-month-old rooted cuttings. All three EtCesA transcripts were upregulated by indole acetic acid and gibberellic acid. This study demonstrates that the increased cellulose deposition in the secondary wood induced by hormones can be attributed to the upregulation of xylem specific CesAs.

Effect of late planting and shading on cellulose synthesis during cotton fiber secondary wall development

Cotton-rapeseed or cotton-wheat double cropping systems are popular in the Yangtze River Valley and Yellow River Valley of China. Due to the competition of temperature and light resources during the growing season of double cropping system, cotton is generally late-germinating and late-maturing and has to suffer from the coupling of declining temperature and low light especially in the late growth stage. In this study, late planting (LP) and shading were used to fit the coupling stress, and the coupling effect on fiber cellulose synthesis was investigated. Two cotton (Gossypium hirsutum L.) cultivars were grown in the field in 2010 and 2011 at three planting dates (25 April, 25 May and 10 June) each with three shading levels (normal light, declined 20% and 40% PAR). Mean daily minimum temperature was the primary environmental factor affected by LP. The coupling of LP and shading (decreased cellulose content by 7.8%-25.5%) produced more severe impacts on cellulose synthesis than either stress alone, and the effect of LP (decreased cellulose content by 6.7%-20.9%) was greater than shading (decreased cellulose content by 0.7%-5.6%). The coupling of LP and shading hindered the flux from sucrose to cellulose by affecting the activities of related cellulose synthesis enzymes. Fiber cellulose synthase genes expression were delayed under not only LP but shading, and the coupling of LP and shading markedly postponed and even restrained its expression. The decline of sucrose-phosphate synthase activity and its peak delay may cause cellulose synthesis being more sensitive to the coupling stress during the later stage of fiber secondary wall development (38-45 days post-anthesis). The sensitive difference of cellulose synthesis between two cultivars in response to the coupling of LP and shading may be mainly determined by the sensitiveness of invertase, sucrose-phosphate synthase and cellulose synthase.