Fusing Near-Infrared Spectroscopy with Wearable Hemodynamic Measurements Improves Classification of Mental Stress

Iridium oxide-modified reference screen-printed electrodes for point-of-care portable electrochemical cortisol detection

Cortisol is a well-known stress biomarker; this study focuses on using electrochemical immuno-sensing to measure the concentration of cortisol selectively and sensitively in artificial samples. Anti-cortisol antibodies have been immobilised on polycrystalline Au electrodes via strong covalent thiol bonds, fabricating an electrochemical bio-immunosensor for cortisol detection. IrOx was then anodically electrodeposited as a reference electrode on a commercial screen-printed electrode and electrochemical impedance spectrometry (EIS) studies were used to correlate the electrochemical response to cortisol concentration and the induced changes in charge transfer resistance (Rct). A linear relationship between the Rct and the logarithm of cortisol concentration was found in concentrations ranging from 1 ng/mL to 1 mg/mL with limit of detection at 11.85 pg/mL (32.69 pM). The modification of the reference electrode with iridium oxide has greatly improved the reproducibility of the screen-printed electrode. The sensing system can provide a reliable and sensitive detection approach for cortisol measurements.

Garmin Fénix 7® Underestimates Performance at the Lactate Threshold in Comparison to Standardized Blood Lactate Field Test

Purpose

Lactate threshold (LT) is a critical performance measure traditionally obtained using costly laboratory-based tests. Wearables offer a practical and noninvasive alternative for LT assessment in recreational and professional athletes. However, the comparability of these estimates with the regular field tests requires further evaluation.

Patients and Methods

In our sample of 26 participants (nf=7 and nm=19), we compared the estimated running pace and heart rate (HR) at LT with two subsequent tests. First, participants performed the Fenix 7® threshold running test after a calibration phase. Subsequently, they were tested in a standardized, graded blood lactate field test. Age was 25.97 (± 6.26) years, and body mass index (BMI) was 24.58 (± 2.8) kg/m2.

Results

Pace at LT calculated by Fenix 7® (M=11.87 km/h ± 1.26 km/h) was 11.96% lower compared to the field test (M=13.28 km/h ± 1.72 km/h), which was significant (p <0.001, d=-1.19). HR estimated by the Fenix 7® at LT was 1.71% lower (p >0.05). LT data obtained in the field test showed greater overall variance.

Conclusion

Our results suggest sufficient accuracy of Fenix 7® LT estimates for recreational athletes. It can be assumed that for professional athletes, it would fail to provide the nuanced data needed for high-quality training management.

Applications of flexible electronics related to cardiocerebral vascular system

Ensuring accessible and high-quality healthcare worldwide requires field-deployable and affordable clinical diagnostic tools with high performance. In recent years, flexible electronics with wearable and implantable capabilities have garnered significant attention from researchers, which functioned as vital clinical diagnostic-assisted tools by real-time signal transmission from interested targets in vivo. As the most crucial and complex system of human body, cardiocerebral vascular system together with heart-brain network attracts researchers inputting profuse and indefatigable efforts on proper flexible electronics design and materials selection, trying to overcome the impassable gulf between vivid organisms and rigid inorganic units. This article reviews recent breakthroughs in flexible electronics specifically applied to cardiocerebral vascular system and heart-brain network. Relevant sensor types and working principles, electronics materials selection and treatment methods are expounded. Applications of flexible electronics related to these interested organs and systems are specially highlighted. Through precedent great working studies, we conclude their merits and point out some limitations in this emerging field, thus will help to pave the way for revolutionary flexible electronics and diagnosis assisted tools development.

Transcutaneous auricular Vagus Nerve Stimulation and Median Nerve Stimulation reduce acute stress in young healthy adults: a single-blind sham-controlled crossover study

Stress is a major determinant of health and wellbeing. Conventional stress management approaches do not account for the daily-living acute changes in stress that affect quality of life. The combination of physiological monitoring and non-invasive Peripheral Nerve Stimulation (PNS) represents a promising technological approach to quantify stress-induced physiological manifestations and reduce stress during everyday life. This study aimed to evaluate the effectiveness of three well-established transcutaneous PNS modalities in reducing physiological manifestations of stress compared to a sham: auricular and cervical Vagus Nerve Stimulation (taVNS and tcVNS), and Median Nerve Stimulation (tMNS). Using a single-blind sham-controlled crossover study with four visits, we compared the stress mitigation effectiveness of taVNS, tcVNS, and tMNS, quantified through physiological markers derived from five physiological signals peripherally measured on 19 young healthy volunteers. Participants underwent three acute mental and physiological stressors while receiving stimulation. Blinding effectiveness was assessed via subjective survey. taVNS and tMNS relative to sham resulted in significant changes that suggest a reduction in sympathetic outflow following the acute stressors: Left Ventricular Ejection Time Index (LVETI) shortening (tMNS: p = 0.007, taVNS: p = 0.015) and Pre-Ejection Period (PEP)-to-LVET ratio (PEP/LVET) increase (tMNS: p = 0.044, taVNS: p = 0.029). tMNS relative to sham also reduced Pulse Pressure (PP; p = 0.032) and tonic EDA activity (tonicMean; p = 0.025). The nonsignificant blinding survey results suggest these effects were not influenced by placebo. taVNS and tMNS effectively reduced stress-induced sympathetic arousal in wearable-compatible physiological signals, motivating their future use in novel personalized stress therapies to improve quality of life.

Feasibility of a wrist-worn wearable device for estimating mental health status in patients with mental illness

Object

Real-world data from wearable devices has the potential to understand mental health status in everyday life. We aimed to investigate the feasibility of estimating mental health status using a wrist-worn wearable device (Fitbit Sense) that measures movement using a 3D accelerometer and optical pulse photoplethysmography (PPG).

Methods

Participants were 110 patients with mental illnesses from different diagnostic groups. The study was undertaken between 1 October 2020 and 31 March 2021. Participants wore a Fitbit Sense on their wrist and also completed the State-Trait Anxiety Inventory (STAI), Positive and Negative Affect Schedule (PANAS), and EuroQol 5 dimensions 5-level (EQ-5D-5L) during the study period. To determine heart rate (HR) variability (HRV), we calculated the sdnn (standard deviation of the normal-to-normal interval), coefficient of variation of R-R intervals, and mean HR separately for each sleep stage and the daytime. The association between mental health status and HR and HRV was analyzed.

Results

The following significant correlations were found in the wake after sleep onset stage within 3 days of mental health status assessment: sdnn, HR and STAI scores, HR and PANAS scores, HR and EQ-5D-5L scores. The association between mental health status and HR and HRV was stronger the closer the temporal distance between mental health status assessment and HR measurement.

Conclusion

A wrist-worn wearable device that measures PPG signals was feasible for use with patients with mental illness. Resting state HR and HRV could be used as an objective assessment of mental health status within a few days of measurement.

Functional Near-Infrared Spectroscopy as a Personalized Digital Healthcare Tool for Brain Monitoring

The sustained growth of digital healthcare in the field of neurology relies on portable and cost-effective brain monitoring tools that can accurately monitor brain function in real time. Functional near-infrared spectroscopy (fNIRS) is one such tool that has become popular among researchers and clinicians as a practical alternative to functional magnetic resonance imaging, and as a complementary tool to modalities such as electroencephalography. This review covers the contribution of fNIRS to the personalized goals of digital healthcare in neurology by identifying two major trends that drive current fNIRS research. The first major trend is multimodal monitoring using fNIRS, which allows clinicians to access more data that will help them to understand the interconnection between the cerebral hemodynamics and other physiological phenomena in patients. This allows clinicians to make an overall assessment of physical health to obtain a more-detailed and individualized diagnosis. The second major trend is that fNIRS research is being conducted with naturalistic experimental paradigms that involve multisensory stimulation in familiar settings. Cerebral monitoring of multisensory stimulation during dynamic activities or within virtual reality helps to understand the complex brain activities that occur in everyday life. Finally, the scope of future fNIRS studies is discussed to facilitate more-accurate assessments of brain activation and the wider clinical acceptance of fNIRS as a medical device for digital healthcare.

Functional near infrared spectroscopy for brain functional connectivity analysis: A graph theoretic approach

Background

Functional Near-Infrared Spectroscopy is an optical brain monitoring technique which uses NIRS to perform functional neuroimaging. It uses near-infrared light for measuring brain activity and to estimate the cortical hemodynamic activity in the brain due to motor activity. Functional NIRS measures the changes in oxygen levels in oxygenated and deoxygenated hemoglobin by optical absorption. One of the main challenges in the analysis of fNIRS signals is the signal degradation due to the interference from noise and artifacts from multiple sources.

Methods

In this context, this research aims to analyze the connectivity between different regions of the brain using graph theory and hence the geometrical association of brain networks in terms of functional parameters. In this study, the impact of two noise removal processes (CBSI and TDDR), along with two types of correlation fNIRS such as Pearson's Correlation (PC), and Cross Correlation (CC) and various whole-brain network architectures on the reproducibility of graph measurements for individual participants has been carefully examined for different densities ranging from 5% to 50%.The graph measures' repeatability at the individual level was studied using the test-retest variability (TRT).

Results

The test-retest variability for global measurements in binary networks was substantially large at low densities, regardless of the noise removal method or the kind of correlation. Very low test -reset values are observed for weighted networks and great reproducibility for measures of the entire graph. When comparing the test-retest values for various methods, the kind of correlation, the absolute value of the correlation, and the weight calculation method on the raw correlation value all had significant major effects.

Conclusion

Based on a weighted network with the absolute cross correlation functioning as the weight, this study revealed that normalized global graph measurements were reliable. The node definition techniques that were utilized to remove noise were not essential for the normalized graph measures to be reproducible.

Fully Transparent, Ultrathin Flexible Organic Electrochemical Transistors with Additive Integration for Bioelectronic Applications

Optical transparency is highly desirable in bioelectronic sensors because it enables multimodal optical assessment during electronic sensing. Ultrathin (<5 µm) organic electrochemical transistors (OECTs) can be potentially used as a highly efficient bioelectronic transducer because they demonstrate high transconductance during low-voltage operation and close conformability to biological tissues. However, the fabrication of fully transparent ultrathin OECTs remains a challenge owing to the harsh etching processes of nanomaterials. In this study, fully transparent, ultrathin, and flexible OECTs are developed using additive integration processes of selective-wetting deposition and thermally bonded lamination. These processes are compatible with Ag nanowire electrodes and conducting polymer channels and realize unprecedented flexible OECTs with high visible transmittance (>90%) and high transconductance (≈1 mS) in low-voltage operations (<0.6 V). Further, electroencephalogram acquisition and nitrate ion sensing are demonstrated in addition to the compatibility of simultaneous assessments of optical blood flowmetry when the transparent OECTs are worn, owing to the transparency. These feasibility demonstrations show promise in contributing to human stress monitoring in bioelectronics.

Photoplethysmography Enabled Wearable Devices and Stress Detection: A Scoping Review

BACKGROUND

Mental and physical health are both important for overall health. Mental health includes emotional, psychological, and social well-being; however, it is often difficult to monitor remotely. The objective of this scoping review is to investigate studies that focus on mental health and stress detection and monitoring using PPG-based wearable sensors.

METHODS

A literature review for this scoping review was conducted using the PRISMA (Preferred Reporting Items for the Systematic Reviews and Meta-analyses) framework. A total of 290 studies were found in five medical databases (PubMed, Medline, Embase, CINAHL, and Web of Science). Studies were deemed eligible if non-invasive PPG-based wearables were worn on the wrist or ear to measure vital signs of the heart (heart rate, pulse transit time, pulse waves, blood pressure, and blood volume pressure) and analyzed the data qualitatively.

RESULTS

Twenty-three studies met the inclusion criteria, with four real-life studies, eighteen clinical studies, and one joint clinical and real-life study. Out of the twenty-three studies, seventeen were published as journal-based articles, and six were conference papers with full texts. Because most of the articles were concerned with physiological and psychological stress, we decided to only include those that focused on stress. In twelve of the twenty articles, a PPG-based sensor alone was used to monitor stress, while in the remaining eight papers, a PPG sensor was used in combination with other sensors.

CONCLUSION

The growing demand for wearable devices for mental health monitoring is evident. However, there is still a significant amount of research required before wearable devices can be used easily and effectively for such monitoring. Although the results of this review indicate that mental health monitoring and stress detection using PPG is possible, there are still many limitations within the current literature, such as a lack of large and diverse studies and ground-truth methods, that need to be addressed before wearable devices can be globally useful to patients.

Application of photoplethysmography signals for healthcare systems: An in-depth review

BACKGROUND AND OBJECTIVES

Photoplethysmography (PPG) is a device that measures the amount of light absorbed by the blood vessel, blood, and tissues, which can, in turn, translate into various measurements such as the variation in blood flow volume, heart rate variability, blood pressure, etc. Hence, PPG signals can produce a wide variety of biological information that can be useful for the detection and diagnosis of various health problems. In this review, we are interested in the possible health disorders that can be detected using PPG signals.

METHODS

We applied PRISMA guidelines to systematically search various journal databases and identified 43 PPG studies that fit the criteria of this review.

RESULTS

Twenty-five health issues were identified from these studies that were classified into six categories: cardiac, blood pressure, sleep health, mental health, diabetes, and miscellaneous. Various routes were employed in these PPG studies to perform the diagnosis: machine learning, deep learning, and statistical routes. The studies were reviewed and summarized.

CONCLUSIONS

We identified limitations such as poor standardization of sampling frequencies and lack of publicly available PPG databases. We urge that future work should consider creating more publicly available databases so that a wide spectrum of health problems can be covered. We also want to promote the use of PPG signals as a potential precision medicine tool in both ambulatory and hospital settings.

Noninvasive Continuous Blood Pressure Estimation from Pulse Transit Time: A review of the calibration models

Noninvasive continuous blood pressure estimation is a promising alternative to minimally invasive blood pressure measurement using cuff and invasive catheter measurement, because it opens the way to both long-term and continuous blood pressure monitoring in ecological situation. The most current estimation algorithm is based on pulse transit time measurement where at least two measured signals need to be acquired. From the pulse transit time values, it is possible to estimate the continuous blood pressure for each cardiac cycle. This measurement highly depends on arterial properties which are not easily accessible with common measurement techniques; but these properties are needed as input for the estimation algorithm. With every change of input arterial properties, the error in the blood pressure estimation rises, thus a periodic calibration procedure is needed for error minimization. Recent research is focused on simplified constant arterial properties which are not constant over time and uses only linear model based on initial measurement. The elaboration of continuous calibration procedures, independent of recalibration measurement, is the key to improving the accuracy and robustness of noninvasive continuous blood pressure estimation. However, most models in literature are based on linear approximation and we discuss here the need for more complete calibration models.

The Delineation of Fiducial Points for Non-Contact Radar Seismocardiogram Signals Without Concurrent ECG

OBJECTIVE

Non-contact sensing of seismocardiogram (SCG) signals through a microwave Doppler radar is promising for biomedical applications. However, the delineation of fiducial points for radar SCG still relies on concurrent ECG which requires a contact sensor and limits the complete non-contact detection of SCG.

METHODS

Instead of ECG, a new reference signal, the radar displacement signal of heartbeat (RDH), was derived through the complex Fourier transform and the band pass filtering of the radar signal. The RDH signal was used to locate each cardiac cycle and mask the systolic profile, which was further used to detect an important fiducial point, aortic valve opening (AO). The beat-to-beat interval was estimated from AO-AO interval and compared with the gold standard, ECG R-to-R interval.

RESULTS

For the 22 subjects in the study, the evaluation of the AOs detected by RDH (AO_RDH) shows the average detection ratio can reach 90%, indicating a high ratio of the AO_RDH that are exactly the same as AO detected using the ECG R-wave (AO_ECG). Additionally, the left ventricular ejection time (LVET) values estimated from the ensemble averaged radar waveform through AO_RDH segmentation are within 2 ms of those through AO_ECG segmentation, for all the detected subjects. Further analysis demonstrates that the beat-to-beat intervals calculated from AO_RDH have an average root-mean-square-deviation (RMSD) of 53.73 ms when compared with ECG R-to-R intervals, and have an average RMSD of 23.47 ms after removing the beats in which AO cannot be identified.

CONCLUSIONS

Radar signal RDH can be used as a reference signal to delineate fiducial points for non-contact radar SCG signals.

SIGNIFICANCE

This study can be applied to develop complete non-contact sensing of SCG and monitoring of vital signs, where contact-based SCG is not feasible.

Transcutaneous cervical vagal nerve stimulation reduces sympathetic responses to stress in posttraumatic stress disorder: A double-blind, randomized, sham controlled trial

OBJECTIVE

Exacerbated autonomic responses to acute stress are prevalent in posttraumatic stress disorder (PTSD). The purpose of this study was to assess the effects of transcutaneous cervical VNS (tcVNS) on autonomic responses to acute stress in patients with PTSD. The authors hypothesized tcVNS would reduce the sympathetic response to stress compared to a sham device.

METHODS

Using a randomized double-blind approach, we studied the effects of tcVNS on physiological responses to stress in patients with PTSD (n = 25) using noninvasive sensing modalities. Participants received either sham (n = 12) or active tcVNS (n = 13) after exposure to acute personalized traumatic script stress and mental stress (public speech, mental arithmetic) over a three-day protocol. Physiological parameters related to sympathetic responses to stress were investigated.

RESULTS

Relative to sham, tcVNS paired to traumatic script stress decreased sympathetic function as measured by: decreased heart rate (adjusted β = -5.7%; 95% CI: ±3.6%, effect size d = 0.43, p < 0.01), increased photoplethysmogram amplitude (peripheral vasodilation) (30.8%; ±28%, 0.29, p < 0.05), and increased pulse arrival time (vascular function) (6.3%; ±1.9%, 0.57, p < 0.0001). Similar (p < 0.05) autonomic, cardiovascular, and vascular effects were observed when tcVNS was applied after mental stress or without acute stress.

CONCLUSION

tcVNS attenuates sympathetic arousal associated with stress related to traumatic memories as well as mental stress in patients with PTSD, with effects persisting throughout multiple traumatic stress and stimulation testing days. These findings show that tcVNS has beneficial effects on the underlying neurophysiology of PTSD. Such autonomic metrics may also be evaluated in daily life settings in tandem with tcVNS therapy to provide closed-loop delivery and measure efficacy.ClinicalTrials.gov Registration # NCT02992899.

Automatic Detection of Target Engagement in Transcutaneous Cervical Vagal Nerve Stimulation for Traumatic Stress Triggers

Transcutaneous cervical vagal nerve stimulation (tcVNS) devices are attractive alternatives to surgical implants, and can be applied for a number of conditions in ambulatory settings, including stress-related neuropsychiatric disorders. Transferring tcVNS technologies to at-home settings brings challenges associated with the assessment of therapy response. The ability to accurately detect whether tcVNS has been effectively delivered in a remote setting such as the home has never been investigated. We designed and conducted a study in which 12 human subjects received active tcVNS and 14 received sham stimulation in tandem with traumatic stress, and measured continuous cardiopulmonary signals including the electrocardiogram (ECG), photoplethysmogram (PPG), seismocardiogram (SCG), and respiratory effort (RSP). We extracted physiological parameters related to autonomic nervous system activity, and created a feature set from these parameters to: 1) detect active (vs. sham) tcVNS stimulation presence with machine learning methods, and 2) determine which sensing modalities and features provide the most salient markers of tcVNS-based changes in physiological signals. Heart rate (ECG), vasomotor activity (PPG), and pulse arrival time (ECG+PPG) provided sufficient information to determine target engagement (compared to sham) in addition to other combinations of sensors. resulting in 96% accuracy, precision, and recall with a receiver operator characteristics area of 0.96. Two commonly utilized sensing modalities (ECG and PPG) that are suitable for home use can provide useful information on therapy response for tcVNS. The methods presented herein could be deployed in wearable devices to quantify adherence for at-home use of tcVNS technologies.

Performance Improvement of Near-Infrared Spectroscopy-Based Brain-Computer Interface Using Regularized Linear Discriminant Analysis Ensemble Classifier Based on Bootstrap Aggregating

Ensemble classifiers have been proven to result in better classification accuracy than that of a single strong learner in many machine learning studies. Although many studies on electroencephalography-brain-computer interface (BCI) used ensemble classifiers to enhance the BCI performance, ensemble classifiers have hardly been employed for near-infrared spectroscopy (NIRS)-BCIs. In addition, since there has not been any systematic and comparative study, the efficacy of ensemble classifiers for NIRS-BCIs remains unknown. In this study, four NIRS-BCI datasets were employed to evaluate the efficacy of linear discriminant analysis ensemble classifiers based on the bootstrap aggregating. From the analysis results, significant (or marginally significant) increases in the bitrate as well as the classification accuracy were found for all four NIRS-BCI datasets employed in this study. Moreover, significant bitrate improvements were found in two of the four datasets.