Biodegradable polymers as encapsulation materials for cosmetics and personal care markets

Palmitic acid-mediated modulation of crystallization dynamics in amylose microparticle formation: From spherical to macaron and disc shapes

Here, we investigated the complexation of short chain amylose (SCAs) and palmitic acid (PA), serving as polymeric building blocks that alter the selectivity and directionality of particle growth. This alteration affects the shape anisotropy of the particles, broadening their applications due to the increased surface area. By modifying the concentration of PA, we were able to make spherical, macaron, and disc-shaped particles, demonstrating that PA acts as a structure-directing agent. We further illustrated the lateral and longitudinal stacking kinetics between PA-SCA inclusion complexes during self-assembly, leading to anisotropy. Transmission electron microscope (TEM) and scanning electron microscope (SEM) revealed the structural difference between the initial and final morphologies of palmitic acid-short chain amylose particles (PA-SCAPs) compared to those of short-chain amylose particle (SCAPs). The presence of PA-SCA inclusion complex in the anisotropic particles was confirmed using nuclear magnetic resonance (NMR) and powder x-ray diffraction (XRD) analysis.

Transitioning from Pickering emulsions to Pickering emulsion hydrogels: A potential advancement in cosmeceuticals

Cosmeceuticals, focusing on enhancing skin health and appearance, heavily rely on emulsions as one of the common mediums. These emulsions pose a challenge due to their dependence on surfactants which are essential for stability but are causing concerns about environmental impact as well as evolving consumer preferences. This has led to research focused on Pickering emulsions (PEs), which are colloidal particle-based emulsion alternatives. Compared to conventional emulsions, PEs offer enhanced stability and functionality in addition to serving as a sustainable alternative but still pose challenges such as rheological control and requiring further improvement in long-term stability, whereby the limitations could be addressed through the introduction of a hydrogel network. In this review, we first highlight the strategies and considerations to optimize active ingredient (AI) absorption and penetration in a PE-based formulation. We then delve into a comprehensive overview of the potential of Pickering-based cosmeceutical emulsions including their attractive features, the various Pickering particles that can be employed, past studies and their limitations. Further, PE hydrogels (PEHs), which combines the features between PE and hydrogel as an innovative solution to address challenges posed by both conventional emulsions and PEs in the cosmeceutical industry is explored. Moreover, concerns related to toxicity and biocompatibility are critically examined, alongside considerations of scalability and commercial viability, providing a forward-looking perspective on potential future research directions centered on the application of PEHs in the cosmeceutical field.

A versatile multilayer liquid-liquid encapsulation technique

HYPOTHESIS

Generating multi-layer cargo using conventional methods is challenging. We hypothesize that incorporating a Y-junction compound droplet generator to encase a target core inside a second liquid can circumvent the kinetic energy dependence of the impact-driven liquid-liquid encapsulation technique, enabling minimally restrictive multi-layer encapsulation.

EXPERIMENTS

Stable wrapping is obtained by impinging a compound droplet (generated using Y-junction) on an interfacial layer of another shell-forming liquid floating on a host liquid bath, leading to double-layered encapsulation. The underlying dynamics of the liquid-liquid interfaces are captured using high-speed imaging. To demonstrate the versatility of the technique, we used various liquids as interfacial layers, including magnetoresponsive oil-based ferrofluids. Moreover, we extended the technique to triple-layered encapsulation by overlaying a second interfacial layer atop the first floating interfacial layer.

FINDINGS

The encapsulating layer(s) effectively protects the water-soluble inner core (ethylene glycol) inside the water bath. A non-dimensional experimental regime is established for successful encapsulation in terms of the impact kinetic energy, interfacial layer thickness, and the viscosity ratio of the interfacial layer and the outer core liquid. Using selective fluorescent tagging, we confirm the presence of individual shell layers wrapped around the core, which presents a promising pathway to visualize the internal morphology of final encapsulated droplets.

Microspheres Based on Blends of Chitosan Derivatives with Carrageenan as Vitamin Carriers in Cosmeceuticals

Chitosan (CS) has a natural origin and is a biodegradable and biocompatible polymer with many skin-beneficial properties successfully used in the cosmetics and pharmaceutical industry. CS derivatives, especially those synthesized via a Schiff base reaction, are very important due to their unique antimicrobial activity. This study demonstrates research results on the use of hydrogel microspheres made of [chitosan-graft-poly(ε-caprolactone)]-blend-(ĸ-carrageenan)], [chitosan-2-pyridinecarboxaldehyde-graft-poly(ε-caprolactone)]-blend-(ĸ-carrageenan), and chitosan-sodium-4-formylbenzene-1,3-disulfonate-graft-poly(ε-caprolactone)]-blend-(ĸ-carrageenan) as innovative vitamin carriers for cosmetic formulation. A permeation study of retinol (vitamin A), L-ascorbic acid (vitamin C), and α-tocopherol (vitamin E) from the cream through a human skin model by the Franz Cell measurement system was presented. The quantitative analysis of the release of the vitamins added to the cream base, through the membrane, imitating human skin, showed a promising profile of its release/penetration, which is promising for the development of a cream with anti-aging properties. Additionally, the antibacterial activity of the polymers from which the microspheres are made allows for the elimination of preservatives and parabens as cosmetic formulation ingredients.

Chitosan Alginate Nanoparticles of Protein Hydrolysate from Acheta domesticus with Enhanced Stability for Skin Delivery

This study aimed to develop chitosan alginate nanoparticles (CANPs) for enhanced stability for dermal delivery of protein hydrolysate from Acheta domesticus (PH). CANPs, developed using ionotropic pre-gelation followed by the polyelectrolyte complex technique, were characterized for particle size, polydispersity index (PDI), and zeta potential. After the incorporation of PH into CANPs, a comprehensive assessment included encapsulation efficiency, loading capacity, morphology, chemical analyses, physical and chemical stability, irritation potential, release profile, skin permeation, and skin retention. The most optimal CANPs, comprising 0.6 mg/mL sodium alginate, 1.8 mg/mL calcium chloride, and 0.1 mg/mL chitosan, exhibited the smallest particle size (309 ± 0 nm), the narrowest PDI (0.39 ± 0.01), and pronounced negative zeta potential (-26.0 ± 0.9 mV), along with an encapsulation efficiency of 56 ± 2%, loading capacity of 2.4 ± 0.1%, release of 40 ± 2% after 48 h, and the highest skin retention of 12 ± 1%. The CANPs induced no irritation and effectively enhanced the stability of PH from 44 ± 5% of PH remaining in a solution to 74 ± 4% after three-month storage. Therefore, the findings revealed the considerable potential of CANPs in improving PH stability and skin delivery, with promising applications in cosmetics and related fields.

Microplastic label in microencapsulation field - Consequence of shell material selection

Plastics make our lives easier in many ways; however, if they are not appropriately disposed of or recycled, they may end up in the environment where they stay for centuries and degrade into smaller and smaller pieces, called microplastics. Each year, approximately 42000 tonnes of microplastics end up in the environment when products containing them are used. According to the European Chemicals Agency (ECHA) one of the significant sources of microplastics are microcapsules formulated in home care and consumer care products. As part of the EU's plastics strategy, ECHA has proposed new regulations to ban intentionally added microplastics starting from 2022. It means that the current cross-linked microcapsules widely applied in consumer goods must be transformed into biodegradable shell capsules. The aim of this review is to provide the readers with a comprehensive and in-depth understanding of recent developments in the art of microencapsulation. Thus, considering the chemical structure of the capsule shell's materials, we discuss whether microcapsules should also be categorized as microplastic and therefore, feared and avoided or whether they should be used despite the persisting concern.

Polysaccharide/Silica Microcapsules Prepared via Ionic Gelation Combined with Spray Drying: Application in the Release of Hydrophilic Substances and Catalysis

Polysaccharide/silica hybrid microcapsules were prepared using ionic gelation followed by spray-drying. Chitosan and alginate were used as biopolymer matrices, and in situ prepared silica was used as a structuring additive. The prepared microparticles were used in two very different applications: the encapsulation of hydrophilic molecules, and as a support for palladium nanoparticles used as catalysts for a model organic reaction, namely the reduction of p-nitrophenol by sodium borhydride. In the first application, erioglaucine disodium salt, taken as a model hydrophilic substance, was encapsulated in situ during the preparation of the microparticles. The results indicate that the presence of silica nanostructures, integrated within the polymer matrix, affect the morphology and the stability of the particles, retarding the release of the encapsulated substance. In the second application, chloropalladate was complexed on the surface of chitosan microparticles, and palladium(II) was subsequently reduced to palladium(0) to obtain heterogeneous catalysts with an excellent performance.

Current Insights into the Formulation and Delivery of Therapeutic and Cosmeceutical Agents for Aging Skin

“Successful aging” counters the traditional idea of aging as a disease and is increasingly equated with minimizing age signs on the skin, face, and body. From this stems the interest in preventative aesthetic dermatology that might help with the healthy aging of skin, help treat or prevent certain cutaneous disorders, such as skin cancer, and help delay skin aging by combining local and systemic methods of therapy, instrumental devices, and invasive procedures. This review will discuss the main mechanisms of skin aging and the potential mechanisms of action for commercial products already on the market, highlighting the issues related to the permeation of the skin from different classes of compounds, the site of action, and the techniques employed to overcome aging. The purpose is to give an overall perspective on the main challenges in formulation development, especially nanoparticle formulations, which aims to defeat or slow down skin aging, and to highlight new market segments, such as matrikines and matrikine-like peptides. In conclusion, by applying enabling technologies such as those delivery systems outlined here, existing agents can be repurposed or fine-tuned, and traditional but unproven treatments can be optimized for efficacious dosing and safety.

Biodegradable Block Poly(ester amine)s with Pendant Hydroxyl Groups for Biomedical Applications

The article presents the results of the synthesis and characteristics of the amphiphilic block terpolymers, built of a hydrophilic polyesteramine block, and hydrophobic blocks made of lactidyl and glycolidyl units. These terpolymers were obtained during the copolymerization of L-lactide with glycolide carried out in the presence of previously produced macroinitiators with protected amine and hydroxyl groups. The terpolymers were prepared to produce a biodegradable and biocompatible material containing active hydroxyl and/or amino groups, with strong antibacterial properties and high surface wettability by water. The control of the reaction course, the process of deprotection of functional groups, and the properties of the obtained terpolymers were made based on 1H NMR, FTIR, GPC, and DSC tests. Terpolymers differed in the content of amino and hydroxyl groups. The values of average molecular mass oscillated from about 5000 g/mol to less than 15,000 g/mol. Depending on the length of the hydrophilic block and its composition, the value of the contact angle ranged from 50° to 20°. The terpolymers containing amino groups, capable of forming strong intra- and intermolecular bonds, show a high degree of crystallinity. The endotherm responsible for the melting of L-lactidyl semicrystalline regions appeared in the range from about 90 °C to close to 170 °C, with a heat of fusion from about 15 J/mol to over 60 J/mol.

Electrospun fibers as carriers for topical drug delivery and release in skin bandages and patches for atopic dermatitis treatment

The skin is a complex layer system and the most important barrier between the environment and the organism. In this review, we describe some widespread skin problems, with a focus on eczema, which are affecting more and more people all over the world. Most of treatment methods for atopic dermatitis (AD) are focused on increasing skin moisture and protecting from bacterial infection and external irritation. Topical and transdermal treatments have specific requirements for drug delivery. Breathability, flexibility, good mechanical properties, biocompatibility, and efficacy are important for the patches used for skin. Up to today, electrospun fibers are mostly used for wound dressing. Their properties, however, meet the requirements for skin patches for the treatment of AD. Active agents can be incorporated into fibers by blending, coaxial or side-by-side electrospinning, and also by physical absorption post-processing. Drug release from the electrospun membranes is affected by drug and polymer properties and the technique used to combine them into the patch. We describe in detail the in vitro release mechanisms, parameters affecting the drug transport, and their kinetics, including theoretical approaches. In addition, we present the current research on skin patch design. This review summarizes the current extensive know-how on electrospun fibers as skin drug delivery systems, while underlining the advantages in their prospective use as patches for atopic dermatitis. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Therapeutic Approaches and Drug Discovery > Emerging Technologies.

A road map on synthetic strategies and applications of biodegradable polymers

Biodegradable polymers have emerged as fascinating materials due to their non-toxicity, environmentally benign nature and good mechanical strength. The toxic effects of non-biodegradable plastics paved way for the development of sustainable and biodegradable polymers. The engineering of biodegradable polymers employing various strategies like radical ring opening polymerization, enzymatic ring opening polymerization, anionic ring opening polymerization, photo-initiated radical polymerization, chemoenzymatic method, enzymatic polymerization, ring opening polymerization and coordinative ring opening polymerization have been discussed in this review. The application of biodegradable polymeric nanoparticles in the biomedical field and cosmetic industry is considered to be an emerging field of interest. However, this review mainly highlights the applications of selected biodegradable polymers like polylactic acid, poly(ε-caprolactone), polyethylene glycol, polyhydroxyalkanoates, poly(lactide-co-glycolide) and polytrimethyl carbonate in various fields like agriculture, biomedical, biosensing, food packaging, automobiles, wastewater treatment, textile and hygiene, cosmetics and electronic devices.

Stimulus responsive microcapsules and their aromatic applications

Fragrances and essential oils are promising for a wide range of applications due to their pleasant odors and diverse effects. However, direct addition to consumer products has the disadvantages of short retention time and easy deterioration of odor. At the same time, releasing a large amount of odor in a short time may be an unpleasant experience, which severely limits the practical application of aromatic substances. Microencapsulation perfectly solves these problems. Stimuli-responsive microcapsules, which combine environmental stimulation with microencapsulation, can not only effectively prevent the rapid decomposition and evaporation of aroma components, but also realize the "on-off" intelligent release of aroma substances to environmental changes, which have great promise in the field of fragrances. In this review, the application of stimuli-responsive microcapsules in fragrances is highlighted. Firstly, various encapsulation materials used to prepare stimuli-responsive aromatic microcapsules are described, mainly including some natural polymers, synthetic polymers, and inorganic materials. Subsequently, there is a detailed description of the common release mechanisms of stimuli-responsive aromatic microcapsules are described in detail. Finally, the application and future research directions are given for stimuli-responsive aromatic microcapsules in new textiles, food, paper, and leather.

Encapsulation of hygroscopic liquids via polymer precipitation in non-aqueous emulsions

HYPOTHESIS

Encapsulation of ionic liquids (ILs) and phase change materials (PCMs) can overcome limitations associated with bulk materials, e.g., slow mass transfer rates, high viscosities, or susceptibility to external environment. Single step soft-templated encapsulation methods commonly use interfacial polymerization for shell formation, with a multifunctional monomer in the continuous phase and another in the discontinuous phase, and thus do not give pristine core material. We posit that polymer precipitation onto emulsion droplets in non-aqueous emulsions could produce a robust shell without contamination of the core, ideal for the encapsulation of water-sensitive or water-miscible materials.

EXPERIMENTS

Solutions of commodity polymers were added to the continuous phase of non-aqueous Pickering emulsions stabilized by alkylated graphene oxide (GO) nanosheets such that the change in solubility of the polymer led to formation of robust shells and the production of capsules that could be isolated.

FINDINGS

We demonstrate that a polymer precipitation approach can produce capsules with pristine core of the IL 1-ethyl-3-methylimidazolium hexafluorophosphate [Emim][PF₆] or the salt hydrate PCM magnesium nitrate hexahydrate (MNH) and shell of nanosheets and polystyrene, poly(methyl methacrylate), or polyethylene. The capsules are approximately 80 wt% [Emim][PF₆] or >90 wt% MNH, and the core can undergo multiple cycles of solidification and melting without leakage or destruction. This novel, single-step methodology provides a distinct advantage to access capsules with pristine core composition and is amenable to different core and shell, paving the way for tailoring capsule composition for desired applications.

Polymeric Nanotechnologies for the Treatment of Periodontitis: A Chronological Review

Periodontitis is a chronic infectious and inflammatory disease of periodontal tissues estimated to affect 70 - 80 % of all adults. At the same time, periodontium, the site of periodontal pathologies, is an extraordinarily complex plexus of soft and hard tissues, the regeneration of which using even the most advanced forms of tissue engineering continues to be a challenge. Nanotechnologies, meanwhile, have provided exquisite tools for producing biomaterials and pharmaceutical formulations capable of elevating the efficacies of standard pharmacotherapies and surgical approaches to whole new levels. A bibliographic analysis provided here demonstrates a continuously increasing research output of studies on the use of nanotechnologies in the management of periodontal disease, even when they are normalized to the total output of studies on periodontitis. The great majority of biomaterials used to tackle periodontitis, including those that pioneered this interesting field, have been polymeric. In this article, a chronological review of polymeric nanotechnologies for the treatment of periodontitis is provided, focusing on the major conceptual innovations since the late 1990s, when the first nanostructures for the treatment of periodontal diseases were fabricated. In the opening sections, the etiology and pathogenesis of periodontitis and the anatomical and histological characteristics of the periodontium are being described, along with the general clinical manifestations of the disease and the standard means of its therapy. The most prospective chemistries in the design of polymers for these applications are also elaborated. It is concluded that the amount of innovation in this field is on the rise, despite the fact that most studies are focused on the refinement of already established paradigms in tissue engineering rather than on the development of revolutionary new concepts.

Microparticulate and nanotechnology mediated drug delivery system for the delivery of herbal extracts

There has been a growing interest in the scientific community to explore the complete potential of phytoconstituents, herbal or plant-based ingredients owing to a range of benefits they bring along. The herbal plants accommodate many phytoconstituents that are responsible for various activities such as anti-oxidant, antimicrobial, anticancer, anti-inflammatory, anti-allergic, hepatoprotective, etc. However, these phytoconstituents are highly sensitive to several environmental and physiological factors such as pH, oxygen, heat, temperature, humidity, stomach acid, enzymes, and light. Hence, there is need for the development of a drug delivery system that can protect the phytoconstituents from both internal and external conditions. In this regard, a microparticulate drug delivery system is considered amongst the ideal choice owing to its small size, ability to protect the environment-sensitive active constituents, in achieving sustained drug delivery, targeted drug delivery, protection of the drug from physiological conditions, minimizing drug-related side effects, etc.

Electrostatic Repulsion Slows Relaxations of Polyelectrolytes in Semidilute Solutions

We investigate the structure and dynamics of unentangled semidilute solutions of sodium polystyrenesulfonate (NaPSS) using small-angle neutron scattering (SANS) and neutron spin-echo (NSE) spectroscopy. The effects of electrostatic interactions and chain structure are examined as a function of ionic strength and polymer concentration, respectively. The SANS profiles exhibit a characteristic structural peak, signature of polyelectrolyte solutions, that can be fit with a combination of a semiflexible chain with excluded volume interactions form factor and a polymer reference interaction site model (PRISM) structure factor. We confirm that electrostatic interactions vary with ionic strength across solutions with similar geometries. The segmental relaxations from NSE deviate from theoretical predictions from Zimm and exhibit two scaling behaviors, with the crossover between the two regimes taking place around the characteristic structural peak. The chain dynamics are suppressed across the length scale of the correlation blob, and inversely related to the structure factor. These observations suggest that the highly correlated nature of polyelectrolytes presents an additional energy barrier that leads to de Gennes narrowing behavior.

ELECTROSPUN SODIUM ALGINATE/POLY(ETHYLENE OXIDE) NANOFIBERS FOR WOUND HEALING APPLICATIONS: CHALLENGES AND FUTURE DIRECTIONS

Alginate is an interesting natural biopolymer to be considered for biomedical applications due to its advantages and good biological properties. These biological properties make electrospun alginate nanofibers suitable for various uses in the biomedical field, such as wound healing dressings, drug delivery systems, or both. Unfortunately, the fabrication of alginate nanofibers by electrospinning is very challenging because of the high viscosity of the solution, high surface tension and rigidity in water due to hydrogen bonding, and also their diaxial linkages. This review presents an overview of the factors affecting the electrospinning process of sodium alginate/poly(ethylene oxide) (SA/PEO), the application of SA/PEO in drug delivery systems for wound healing applications, and the degradation and swelling properties of SA/PEO. The challenges and future directions of SA/PEO in the medical field are also discussed.

Constructing a 3D interconnected "trap-zap" β-CDPs/Fe-g-C3N4 catalyst for efficient sulfamethoxazole degradation via peroxymonosulfate activation: Performance, mechanism, intermediates and toxicity

A novel and high-efficiency catalyst Fe doped g-C₃N₄ (Fe-g-C₃N₄) composited with β-cyclodextrin polymers (β-CDPs) was synthesized for activating peroxymonosulfate (PMS). The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results showed that the catalyst was 3D interconnected porous structure. The degradation rate constant of sulfamethoxazole (SMX) in β-CDPs/Fe-g-C₃N₄+PMS system was estimated to be 0.132 min^-1, which was 14.7 times and 2.2 times that of g-C₃N₄+PMS and Fe-g-C₃N₄+PMS system, respectively. In addition, the β-CDPs/Fe-g-C₃N₄ exhibited superior degradation performance in a wide pH range (3.0-9.0) and good selectivity in the presence of other inorganic anions and natural organics. Radical scavenging, electron paramagnetic resonance (EPR) and electrochemical measurements indicated that ¹O₂ and Fe(V)O were the main active species for SMX degradation in β-CDPs/Fe-g-C₃N₄+PMS system. Moreover, β-CDPs accelerated electron transfer between catalyst and PMS and promoted the generation of reactive oxygen species (ROS) during PMS activation. The loading of β-CDPs increased the yields of Fe(V)O and ¹O₂ in the system and limited the leaching of Fe³⁺. In addition, the possible degradation pathways of SMX were described based on the intermediates detected by liquid chromatography-mass spectrometry (LC-MS), and the toxicity of the intermediates was also evaluated. This work investigate the role of β-CDPs in PMS activation for the first time and develop a promising material with potential for water treatment.

Self-Assembly of Soluplus in Aqueous Solutions: Characterization and Prospectives on Perfume Encapsulation

Soluplus is an amphiphilic graft copolymer intensively studied as a micellar solubilizer for drugs. An extensive characterization of the nanostructure of its colloidal aggregates is still lacking. Here, we provide insights into the polymer's self-assembly in water, and we assess its use as an encapsulating agent for fragrances. The self-assembly properties of Soluplus aqueous solutions were studied over a wide concentration range (1-70% w/w) by means of small-angle neutron scattering (SANS), differential scanning calorimetry, NMR, and rheometry. SANS analyses revealed the presence of polymeric micelles with a fuzzy surface interacting via a 2-Yukawa potential, up to 15% w/w polymer. Increasing the polymer concentration up to 55% w/w led to tightly packed micelles described according to the Teubner-Strey model. The ability of Soluplus to encapsulate seven perfume molecules, 2-phenyl ethanol, l-carvone, linalool, florhydral, β-citronellol, α-pinene, and R-limonene, was then examined. We showed that the fragrance's octanol/water partition coefficient (log K_ow), widely used to characterize the solubilization capacity, is not sufficient to characterize such systems and the presence of specific functional groups or molecular conformation needs to be considered. In fact, the combination of SANS, NMR, confocal laser scanning microscopy, and confocal Raman microscopy showed that the perfumes, interacting with different regions of the polymer aggregates, are able to tune the systems' structures resulting in micelles, matrix-type capsules, core-shell capsules, or oil-in-water emulsions.

Journey to the Market: The Evolution of Biodegradable Drug Delivery Systems

Biodegradable polymers have been used as carriers in drug delivery systems for more than four decades. Early work used crude natural materials for particle fabrication, whereas more recent work has utilized synthetic polymers. Applications include the macroscale, the microscale, and the nanoscale. Since pioneering work in the 1960’s, an array of products that use biodegradable polymers to encapsulate the desired drug payload have been approved for human use by international regulatory agencies. The commercial success of these products has led to further research in the field aimed at bringing forward new formulation types for improved delivery of various small molecule and biologic drugs. Here, we review recent advances in the development of these materials and we provide insight on their drug delivery application. We also address payload encapsulation and drug release mechanisms from biodegradable formulations and their application in approved therapeutic products.

Pickering Emulsions and Antibubbles Stabilized by PLA/PLGA Nanoparticles

Micrometer-sized double emulsions and antibubbles were produced and stabilized via the Pickering mechanism by colloidal interfacial layers of polymeric nanoparticles (NPs). Two types of nanoparticles, consisting either of polylactic acid (PLA) or polylactic-co-glycolic acid (PLGA), were synthesized by the antisolvent technique without requiring any surfactant. PLA nanoparticles were able to stabilize water-in-oil (W/O) emulsions only after tuning the hydrophobicity by means of a thermal treatment. A water-in-oil-in-water (W/O/W) emulsion was realized by emulsifying the previous W/O emulsion in a continuous water phase containing hydrophilic PLGA nanoparticles. Both inner and outer water phases contained a sugar capable of forming a glassy phase, while the oil was crystallizable upon freezing. Freeze drying the double emulsion allowed removing the oil and water and replacing them with air without losing the three-dimensional (3D) structure of the original emulsion owing to the sugar glassy phase. Reconstitution of the freeze-dried double emulsion in water yielded a dispersion of antibubbles, i.e., micrometric bubbles containing aqueous droplets, with the interfaces of the antibubbles being stabilized by a layer of adsorbed polymeric nanoparticles. Remarkably, it was possible to achieve controlled release of a flourescent probe (calcein) from the antibubbles through heating to 37 °C leading to bursting of the antibubbles.

Using Spraying as an Alternative Method for Transferring Capsules Containing Shea Butter to Denim and Non-Denim Fabrics : Preparation of microcapsules for delivery of active ingredients

The aim of this study was to prepare microcapsules and transfer them to denim and non-denim trousers using different application methods. For this purpose, shea butter as active agent was encapsulated in an ethyl cellulose shell using the spray dryer method, and capsule optimisation was studied. A morphological assessment showed that the capsules had a smooth surface and were spherical in shape. The homogenous size distribution of the capsules was supported by laser diffraction analysis. The capsules showed a narrow size distribution, and the mean particle size of optimum formulations of shea butter was 390 nm. Denim fabrics were treated with shea butter capsules using the methods of exhaustion and spraying in order to compare these application methods. The presence of capsules on the fabrics was tested after five wash cycles. The comparison of application methods found similar preferred characteristics for both the exhaustion and spraying methods. However, the spraying method was found to be more sustainable, because it allows working with low liquor ratios in less water, with lower chemical consumption and less waste than the exhaustion method, which requires working with a high liquor ratio. This study showed that the spraying method can be used as an alternative to other application methods in the market for reducing energy consumption, and shea butter capsules can provide moisturising properties to the fabrics.

Fabricating functional circuits on 3D freeform surfaces via intense pulsed light-induced zinc mass transfer

Deployment of functional circuits on a 3D freeform surface is of significant interest to wearable devices on curvilinear skin/tissue surfaces or smart Internet-of-Things with sensors on 3D objects. Here we present a new fabrication strategy that can directly print functional circuits either transient or long-lasting onto freeform surfaces by intense pulsed light-induced mass transfer of zinc nanoparticles (Zn NPs). The intense pulsed light can locally raise the temperature of Zn NPs to cause evaporation. Lamination of a kirigami-patterned soft semi-transparent polymer film with Zn NPs conforming to a 3D surface results in condensation of Zn NPs to form conductive yet degradable Zn patterns onto a 3D freeform surface for constructing transient electronics. Immersing the Zn patterns into a copper sulfate or silver nitrate solution can further convert the transient device to a long-lasting device with copper or silver. Functional circuits with integrated sensors and a wireless communication component on 3D glass beakers and seashells with complex surface geometries demonstrate the viability of this manufacturing strategy.

Bio-sourced polymers in cosmetic emulsions: a hidden potential of the alginates as thickeners and gelling agents

OBJECTIVE

The present work aims to investigate the impact of the alginates on the texture properties of cosmetic emulsions. For this purpose, five systems were selected: a classical emulsion without polymer and four emulsions containing polymers, as texture modifiers, at the level of 1%. Two different grades of alginates were chosen: one rich in mannuronic acid and one rich in guluronic acid. The objective was also to evaluate the potential of in-situ gelation during formulation. The guluronic rich sample was gelled to evaluate the effect on the texture properties. Finally, alginates-based systems were compared to the xanthan gum as a bio-sourced polymer reference.

METHODS

The sensory profile of the systems was established through a combination of prediction models and sensory analysis. The emulsion residual films obtained with natural polymers, Alginates and Xanthan Gum used as thickeners, as well as with the gelled version, were similar. However, the structural differences between polymers intervene during the characterisation of the sensory properties "before" and "during" application. A multi-scale physicochemical analysis was used to explain these differences.

RESULTS

Due to a controlled formulation process, the use of the polymers did not affect the microstructure of the emulsion which remained similar to the control one. The main impact of the polymers was observed on the macroscopic level: both alginates showed their unique textural signature, different from the classical Xanthan Gum. Due to weak structural differences, mechanical and textural properties were very close between the mannuronic rich and guluronic rich samples, when not gelled, compared to other emulsions. However, the molar mass and the mannuronic/guluronic acids ratio were proved to be crucial for the stretching and consistency properties, showing that this structural difference may have an impact when products are handled in traction and compression.

CONCLUSION

Meanwhile, the viscoelastic properties and the dynamic viscosity were greatly increased for the emulsion containing the gelled version of the alginate when compared to the classical polymers. The emulsion was also more consistent as proved by the textural analysis, pointing at better stability and suspension potential of the gelled emulsion versus the classical one containing the usual natural thickening agents.

Antimicrobial materials produced by incorporating copper acetate into ethylene-vinyl alcohol copolymer for its use in personal care and cosmetic packaging

Currently, there is a great demand for functional materials with effective pathogen-killing properties. In this research, we describe the use of green technology “reactive extrusion” for the synthesis of potent antimicrobial materials based on Ethylene-vinyl alcohol copolymer (EVOH). Herein, the antimicrobial agent, copper (II) acetate was used without pretreatment and introduced into the EVOH matrices at high temperatures. The thermal reaction of copper (II) acetate within the EVOH matrices and their effect on the thermal and thermomechanical properties of the polymer were investigated in regards to their concentration. The physicochemical, thermal, and rheological features, as well as, metal salt release kinetics were reported. The antimicrobial agent had significant effects on the properties of the matrix. Results showed a reduction in the glass transition temperatures and storage modulus of the materials in response to the incorporation of copper (II) acetate. Finally, the antimicrobial activity of the products was studied and demonstrated a possibility to create antimicrobial materials in a one-step, solvent-free extrusion process.

Textured Microcapsules through Crystallization

This work demonstrates the fabrication of surface-textured microcapsules formed from emulsion droplets, which are stabilized by an interlocking mesh of needle-like crystals. Crystals of the small-organic-compound decane-1,10-bis(cyclohexyl carbamate) are formed within the geometric confinement of the droplets, through precipitation from a binary-solvent-dispersed phase. This binary mixture consists of a volatile solvent and nonvolatile carrier oil. Crystallization is facilitated upon supersaturation due to evaporation of the volatile solvent. Microcapsule diameter can be easily tuned using microfluidics. This approach also proves to be scalable when using conventional mixers, yielding spikey microcapsules with diameters in the range of 10-50 μm. It is highlighted that the capsule shape can be molded and arrested by jamming using recrystallization in geometric confinement. Moreover, it is shown that these textured microcapsules show a promising enhanced deposition onto a range of fabric fibers.

Aluminium(iii) and zinc(ii) complexes of azobenzene-containing ligands for ring-opening polymerisation of ε-caprolactone and rac-lactide

The ability to control the outcome of polymerisations using an external stimulus remains a formidable challenge.

Polysaccharide nanoparticles: from fabrication to applications

The present review highlights the developments in polysaccharide nanoparticles with a particular focus on applications in biomedicine, cosmetics and food.

The impacts of COVID-19 pandemic on marine litter pollution along the Kenyan Coast: A synthesis after 100 days following the first reported case in Kenya

The contribution of COVID-19 pandemic to marine litter pollution was studied in Mombasa, Kilifi, and Kwale counties of Kenya, in June 2020 (100 days following the first confirmed case in Kenya). Standing stock surveys were conducted in 14 streets and 21 beaches while 157 transects were surveyed for floating litter. COVID-19 related items contributed up to 16.5% of the total litter encountered along the streets. The urban beaches (Mkomani and Nyali) had the highest quantities of COVID-19 related items (55.1% and 2.6% respectively) attributable to the ability to purchase single-use products and lifestyle. Most of the recreational beaches had no COVID-19 related products which could be attributed to the presidential directive on beach closure as a COVID-19 contingency measure. No COVID-19 related litter was found in the floating litter. Generally, beach closure and cessation of movement reduced the amount of litter that leaked to the marine environment.

Encapsulation of Flavours and Fragrances into Polymeric Capsules and Cyclodextrins Inclusion Complexes: An Update

Flavours and fragrances are volatile compounds of large interest for different applications. Due to their high tendency of evaporation and, in most cases, poor chemical stability, these compounds need to be encapsulated for handling and industrial processing. Encapsulation, indeed, resulted in being effective at overcoming the main concerns related to volatile compound manipulation, and several industrial products contain flavours and fragrances in an encapsulated form for the final usage of customers. Although several organic or inorganic materials have been investigated for the production of coated micro- or nanosystems intended for the encapsulation of fragrances and flavours, polymeric coating, leading to the formation of micro- or nanocapsules with a core-shell architecture, as well as a molecular inclusion complexation with cyclodextrins, are still the most used. The present review aims to summarise the recent literature about the encapsulation of fragrances and flavours into polymeric micro- or nanocapsules or inclusion complexes with cyclodextrins, with a focus on methods for micro/nanoencapsulation and applications in the different technological fields, including the textile, cosmetic, food and paper industries.

PEG Graft Polymer Carriers of Antioxidants: In Vitro Evaluation for Transdermal Delivery

The in vitro biochemical evaluation of the applicability of polymers carrying active substances (micelles and conjugates) was carried out. Previously designed amphiphilic graft copolymers with retinol or 4-n-butylresorcinol functionalized polymethacrylate backbone and poly(ethylene glycol) (PEG) side chains that included Janus-type heterografted copolymers containing both PEG and poly(ε-caprolactone) (PCL) side chains were applied as micellar carriers. The polymer self-assemblies were convenient to encapsulate arbutin (ARB) as the selected active substances. Moreover, the conjugates of PEG graft copolymers with ferulic acid (FA) or lipoic acid (LA) were also investigated. The permeability of released active substances through a membrane mimicking skin was evaluated by conducting transdermal tests in Franz diffusion cells. The biological response to new carriers with active substances was tested across cell lines, including normal human dermal fibroblasts (NHDF), human epidermal keratinocyte (HaCaT), as well as cancer melanoma (Me45) and metastatic human melanoma (451-Lu), for comparison. These polymer systems were safe and non-cytotoxic at the tested concentrations for healthy skin cell lines according to the MTT test. Cytometric evaluation of cell cycles as well as cell death defined by Annexin-V apoptosis assays and senescence tests showed no significant changes under action of the delivery systems, as compared to the control cells. In vitro tests confirmed the biochemical potential of these antioxidant carriers as beneficial components in cosmetic products, especially applied in the form of masks and eye pads.

Amphiphilic mPEG-Modified Oligo-Phenylalanine Nanoparticles Chemoenzymatically Synthesized via Papain

Amphiphilic mPEG-modified peptide nanoparticles were developed from oligo-phenylalanine (OPhe) nanoparticles (NPs) synthesized via papain. Tyndall effects indicate that OPhe NPs are amphiphobic. Addition of protein perturbants, sodium dodecyl sulfate (SDS), and urea, in the dispersion solution of OPhe NPs can significantly reduce the R _h,m value of NPs, from approximately 749.2 nm to about 200 nm. Therefore, the hydrophobic interaction and hydrogen bonding play major roles in maintaining the aggregation of OPhe NPs. Using the "grafting to" method, the methoxypolyethylene-modified OPhe NPs (mPEG-g-OPhe NPs) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), ¹H NMR, electrospray ionization mass spectrometry (ESI-MS), and dynamic light scattering (DLS). The attenuated total reflectance (ATR) spectrum of OPhe NPs and mPEG-g-OPhe NPs demonstrate that the secondary structures of these NPs are mainly β-type. mPEG-g-OPhe NPs can self-aggregate into spherical micelles both in water and cyclohexane. Increasing the chain length of the mPEG moiety, the critical micellar concentrations of mPEG-g-OPhe NPs increased in water but decreased in cyclohexane. The light stability, thermal stability, hydrolysis stability, and encapsulation stability of curcumin were significantly promoted by encapsulation in the micelles formed by mPEG-g-OPhe NPs. The protective effects regularly varied with the variations in the mPEG chain length of mPEG-g-OPhe NPs.

Highly Stable and Fine-Textured Hybrid Microspheres for Entrapment of Cosmetic Active Ingredients

This study details the preparation and application of supramolecular host-guest inclusion complexes entrapping biomineralized microspheres for long-term storage and their pH-responsive behavior. The microspheres were assembled using a CaCO₃ synthesis process coupled with cyclodextrin-tetrahydrocurcumin (CD-THC) inclusion complexes, forming fine-textured and mechanically stable hybrid materials. The products were successfully characterized using field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and particle size analysis (PSA). Various parameters such as the Brunauer-Emmett-Teller (BET) surface area, single point total pore volume, and pore size via adsorption/desorption analysis were also determined. The obtained THC-entrapped hybrid microspheres contained as high as 20 wt % THC loading and were very stable, preserving 90% of the initial concentration over four weeks of storage at different temperatures, largely limiting THC leaching and indicating high stability in a physiological environment. In addition, the pH-responsive release of THC from the hybrid microspheres was observed, showing potential use for application to weakly acidic skin surfaces. To our knowledge, this is the first demonstration of antiaging cosmetic formulation technology using biomineralization based on the co-synthesis of CaCO₃ and CD-THC complexes.

β-cyclodextrin improve the tolerant of freshwater algal Spiny Scenedesmus to chiral drugs venlafaxine and its metabolite

This study based on the freshwater algae Spiny scenedesmus (S. scenedesmus) with tolerance to venlafaxine aiming to investigate algae removal abilities. Here presented for the first time to evaluate the effect of β-cyclodextrin (β-CD) on reduce toxicity and enhance removal ability of venlafaxine and O-desmethylvenlafaxine to S. scenedesmus. Based on dose-response results, the toxicity of R-venlafaxine (EC₅₀ = 6.81 mg·L ^-1) and R-O-desmethylvenlafaxine (EC₅₀ = 3.36 mg·L ^-1) to algae were more than two times than those in the presence of β-CD treatment (10.64 mg L ^-1 for R-venlafaxine and 11.87 mg L ^-1 for R-O-desmethylvenlafaxine). The significant differences were observed between S-venlafaxine (11.07 mg L ^-1) and S-O-desmethylvenlafaxine (10.24 mg L ^-1), which were more toxic than R-forms. The half-lives of R- and S-venlafaxine were 0.8 d and 0.5 d in the presence of β-CD, which were obvious shorter than those in alone treatments. In addition, our experiments not only demonstrated that β-CD performed particularly well for removal of venlafaxine and O-desmethylvenlafaxine, it significantly reduces the toxicity of venlafaxine to alga. These results highlight advantages of β-CD relevant to chiral drugs removal and protection of aquatic organisms, which may have a better application for environmental and ecological safety in future.

Biopolymers for hydrogels in cosmetics: review

Hydrogels are cross-linked networks of macromolecular compounds characterized by high water absorption capacity. Such materials find a wide range of biomedical applications. Several polymeric hydrogels can also be used in cosmetics. Herein, the structure, properties and selected applications of hydrogels in cosmetics are discussed in general. Detailed examples from scientific literature are also shown. In this review paper, most common biopolymers used in cosmetics are presented in detail together with issues related to skin treatment and hair conditioning. Hydrogels based on collagen, chitosan, hyaluronic acid, and other polysaccharides have been characterized. New trends in the preparation of hydrogels based on biopolymer blends as well as bigels have been shown. Moreover, biopolymer hydrogels employment in encapsulation has been mentioned.

New Insights on Unique Features and Role of Nanostructured Materials in Cosmetics

The cosmetics industry has boomed in recent years as one of the markets that holds enormous growth potential. Among several industrial sectors, the cosmetics industry has considered nanotechnology-based principles and implemented in product management practices. Out of 1000 registered products available on the global market, up to 13% were referred to as products for cosmetic use. A large number of nanoscale materials with unique physicochemical properties are currently being used in the cosmetics formulations or recommended for future use as nano-systems or novel nanocarriers to encapsulate active ingredients for their efficient delivery through the skin barriers. These nano-systems have demonstrated potential in targeted-oriented drug delivery and offered remarkable features such as better stability, site-specificity, excellent encapsulation efficiency, prolonged action, enhanced skin penetration, and high drug-loading capability. Nevertheless, nanotoxicology research has raised concerns over the excessive use of nanomaterials/nanoparticles in cosmetics, as nanoparticles might enter the skin resulting in health problems. This review provides insights on the characteristic physicochemical features and the potential use of various nanostructured materials, including liposomes, noisome, nanoemulsions, nanoparticles, carbon nanomaterials (graphene, fullerenes), carbon nanotubes, dendrimers, and nanospheres in cosmeceuticals. Moreover, the regulatory aspects of nanomaterials in cosmetics, along with concluding remarks and outlook in this field, were also vetted.

Modular Fabrication of Intelligent Material-Tissue Interfaces for Bioinspired and Biomimetic Devices

One of the goals of biomaterials science is to reverse engineer aspects of human and nonhuman physiology. Similar to the body's regulatory mechanisms, such devices must transduce changes in the physiological environment or the presence of an external stimulus into a detectable or therapeutic response. This review is a comprehensive evaluation and critical analysis of the design and fabrication of environmentally responsive cell-material constructs for bioinspired machinery and biomimetic devices. In a bottom-up analysis, we begin by reviewing fundamental principles that explain materials' responses to chemical gradients, biomarkers, electromagnetic fields, light, and temperature. Strategies for fabricating highly ordered assemblies of material components at the nano to macro-scales via directed assembly, lithography, 3D printing and 4D printing are also presented. We conclude with an account of contemporary material-tissue interfaces within bioinspired and biomimetic devices for peptide delivery, cancer theranostics, biomonitoring, neuroprosthetics, soft robotics, and biological machines.