Dynamic assembly of liquid crystalline graphene oxide gel fibers for ion transport

Highly Regular Layered Structure via Dual-Spatially-Confined Alignment of Nanosheets Enables High-Performance Nanocomposites

Assembling ultrathin nanosheets into layered structure represents one promising way to fabricate high-performance nanocomposites. However, how to minimize the internal defects of the layered assemblies to fully exploit the intrinsic mechanical superiority of nanosheets remains challenging. Here, a dual-scale spatially confined strategy for the co-assembly of ultrathin nanosheets with different aspect ratios into a near-perfect layered structure is developed. Large-aspect-ratio (LAR) nanosheets are aligned due to the microscale confined space of a flat microfluidic channel, small-aspect-ratio (SAR) nanosheets are aligned due to the nanoscale confined space between adjacent LAR nanosheets. During this co-assembly process, SAR nanosheets can flatten LAR nanosheets, thus reducing wrinkles and pores of the assemblies. Benefiting from the precise alignment (orientation degree of 90.74%) of different-sized nanosheets, efficient stress transfer between nanosheets and interlayer matrix is achieved, resulting in layered nanocomposites with multiscale mechanical enhancement and superior fatigue durability (100 000 bending cycles). The proposed co-assembly strategy can be used to orderly integrate high-quality nanosheets with different sizes or diverse functions toward high-performance or multifunctional nanocomposites.

Holey Sheets Enhance the Packing and Osmotic Energy Harvesting of Graphene Oxide Membranes

Layered membranes assembled from two-dimensional (2D) building blocks such as graphene oxide (GO) are of significant interest in desalination and osmotic power generation because of their ability to selectively transport ions through interconnected 2D nanochannels between stacked layers. However, architectural defects in the final assembled membranes (e.g., wrinkles, voids, and folded layers), which are hard to avoid due to mechanical compliant issues of the sheets during the membrane assembly, disrupt the ionic channel pathways and degrade the stacking geometry of the sheets. This leads to degraded ionic transport performance and the overall structural integrity. In this study, we demonstrate that introducing in-plane nanopores on GO sheets is an effective way to suppress the formation of such architectural imperfections, leading to a more homogeneous membrane. Stacking of porous GO sheets becomes significantly more compact, as the presence of nanopores makes the sheets mechanically softer and more compliant. The resulting membranes exhibit ideal lamellar microstructures with well-aligned and uniform nanochannel pathways. The well-defined nanochannels afford excellent ionic conductivity with an effective transport pathway, resulting in fast, selective ion transport. When applied as a nanofluidic membrane in an osmotic power generation system, the holey GO membrane exhibits higher osmotic power density (13.15 W m-2) and conversion efficiency (46.6%) than the pristine GO membrane under a KCl concentration gradient of 1000-fold.

Scalable Fabrication of Ionic-Conductive Covalent Organic Framework Fibers for Capturing of Sustainable Osmotic Energy

High-performance covalent organic framework (COF) fibers are demanded for an efficient capturing of blue osmotic power because of their excellent durability, simple integration, and large scalability. However, the scalable production of COF fibers is still very challenging due to the poor solubility and fragile structure of COFs. Herein, for the first time, it is reported that COF dispersions can be continuously processed into macroscopic, meter-long, and pure COF fibers using a wet spinning approach. The two presented COF fibers can be directly used for capturing of osmotic energy, avoiding the production of composite materials that require other additives and face challenges such as phase separation and environmental issues induced by the additives. A COF fiber exhibits power densities of 70.2 and 185.3 W m-2 at 50-fold and 500-fold salt gradients, respectively. These values outperform those of most reported systems, which indicate the high potential of COF fibers for capturing of blue osmotic energy.

Covalently bridging graphene edges for improving mechanical and electrical properties of fibers

Assembling graphene sheets into macroscopic fibers with graphitic layers uniaxially aligned along the fiber axis is of both fundamental and technological importance. However, the optimal performance of graphene-based fibers has been far lower than what is expected based on the properties of individual graphene. Here we show that both mechanical properties and electrical conductivity of graphene-based fibers can be significantly improved if bridges are created between graphene edges through covalent conjugating aromatic amide bonds. The improved electrical conductivity is likely due to extended electron conjugation over the aromatic amide bridged graphene sheets. The larger sheets also result in improved π-π stacking, which, along with the robust aromatic amide linkage, provides high mechanical strength. In our experiments, graphene edges were bridged using the established wet-spinning technique in the presence of an aromatic amine linker, which selectively reacts to carboxyl groups at the graphene edge sites. This technique is already industrial and can be easily upscaled. Our methodology thus paves the way to the fabrication of high-performance macroscopic graphene fibers under optimal techno-economic and ecological conditions.

Interfacial Assembly of 2D Graphene-Derived Ion Channels for Water-Based Green Energy Conversion

The utilization of sustained and green energy is believed to alleviate increasing menace of global environmental concerns and energy dilemma. Interfacial assembly of 2D graphene-derived ion channels (2D-GDICs) with tunable ion/fluid transport behavior enables efficient harvesting of renewable green energy from ubiquitous water, especially for osmotic energy harvesting. In this review, various interfacial assembly strategies for fabricating diverse 2D-GDICs are summarized and their ion transport properties are discussed. This review analyzes how particular structure and charge density/distribution of 2D-GDIC can be modulated to minimize internal resistance of ion/fluid transport and enhance energy conversion efficiency, and highlights stimuli-responsive functions and stability of 2D-GDIC and further examines the possibility of integrating 2D-GDIC with other energy conversion systems. Notably, the presented preparation and applications of 2D-GDIC also inspire and guide other 2D materials to fabricate sophisticated ion channels for targeted applications. Finally, potential challenges in this field is analyzed and a prospect to future developments toward high-performance or large-scale real-word applications is offered.

Bidirectionally promoting assembly order for ultrastiff and highly thermally conductive graphene fibres

Macroscopic fibres assembled from two-dimensional (2D) nanosheets are new and impressing type of fibre materials besides those from one-dimensional (1D) polymers, such as graphene fibres. However, the preparation and property-enhancing technologies of these fibres follow those from 1D polymers by improving the orientation along the fibre axis, leading to non-optimized microstructures and low integrated performances. Here, we show a concept of bidirectionally promoting the assembly order, making graphene fibres achieve synergistically improved mechanical and thermal properties. Concentric arrangement of graphene oxide sheets in the cross-section and alignment along fibre axis are realized by multiple shear-flow fields, which bidirectionally promotes the sheet-order of graphene sheets in solid fibres, generates densified and crystalline graphitic structures, and produces graphene fibres with ultrahigh modulus (901 GPa) and thermal conductivity (1660 W m-1 K-1). We believe that the concept would enhance both scientific and technological cognition of the assembly process of 2D nanosheets.

Fibrous wearable and implantable bioelectronics

Fibrous wearable and implantable devices have emerged as a promising technology, offering a range of new solutions for minimally invasive monitoring of human health. Compared to traditional biomedical devices, fibers offer a possibility for a modular design compatible with large-scale manufacturing and a plethora of advantages including mechanical compliance, breathability, and biocompatibility. The new generation of fibrous biomedical devices can revolutionize easy-to-use and accessible health monitoring systems by serving as building blocks for most common wearables such as fabrics and clothes. Despite significant progress in the fabrication, materials, and application of fibrous biomedical devices, there is still a notable absence of a comprehensive and systematic review on the subject. This review paper provides an overview of recent advancements in the development of fibrous wearable and implantable electronics. We categorized these advancements into three main areas: manufacturing processes, platforms, and applications, outlining their respective merits and limitations. The paper concludes by discussing the outlook and challenges that lie ahead for fiber bioelectronics, providing a holistic view of its current stage of development.

Countercation Engineering of Graphene-Oxide Nanosheets for Imparting a Thermoresponsive Ability

Graphene-oxide (GO) nanosheets, which are oxidized derivatives of graphene, are regarded as promising building blocks for functional soft materials. Especially, thermoresponsive GO nanosheets have been widely employed to develop smart membranes/surfaces, hydrogel actuators, recyclable systems, and biomedical applications. However, current synthetic strategies to generate such thermoresponsive GO nanosheets have exclusively relied on the covalent or non-covalent modification of their surfaces with thermoresponsive polymers, such as poly(N-isopropylacrylamide). To impart a thermoresponsive ability to GO nanosheets themselves, we focused on the countercations of the carboxy and acidic hydroxy groups on the GO nanosheets. In this study, we established a general and reliable method to synthesize GO nanosheets with target countercations and systematically investigated their effects on thermoresponsive behaviors of GO nanosheets. As a result, we discovered that GO nanosheets with Bu4N+ countercations became thermoresponsive in water without the use of any thermoresponsive polymers, inducing a reversible sol-gel transition via their self-assembly and disassembly processes. Owing to the sol-gel transition capability, the resultant dispersion can be used as a direct writing ink for constructing a three-dimensionally designable gel architecture of the GO nanosheets. Our concept of "countercation engineering" can become a new strategy for imparting a stimuli-responsive ability to various charged nanomaterials for the development of next-generation smart materials.

Confined Ionic-Liquid-Mediated Cation Diffusion through Layered Membranes for High-Performance Osmotic Energy Conversion

Ion-selective membranes act as the core components in osmotic energy harvesting, but remain with deficiencies such as low ion selectivity and a tendency to swell. 2D nanofluidic membranes as competitive candidates are still subjected to limited mass transport brought by insufficient wetting and poor stability in water. Here, an ionic-liquid-infused graphene oxide (GO@IL) membrane with ultrafast ion transport ability is reported, and how the confined ionic liquid mediates selective cation diffusion is revealed. The infusion of ionic liquids endows the 2D membrane with excellent mechanical strength, anti-swelling properties, and good stability in aqueous electrolytes. Importantly, immiscible ionic liquids also provide a medium, allowing partial dehydration for ultrafast ion transport. Through molecular dynamics simulation and finite element modeling, that GO nanosheets induce ionic liquids to rearrange, bringing in additional space charges, which can be coupled with GO synergistically, is proved. By mixing 0.5/0.01 m NaCl solution, the power density can achieve a record value of ≈6.7 W m^-2 , outperforming state-of-art GO-based membranes. This work opens up a new route for boosting nanofluidic energy conversion because of the diversity of the ILs and 2D materials.

Extremely Robust and Multifunctional Nanocomposite Fibers for Strain-Unperturbed Textile Electronics

Textile electronics are needed that can achieve strain-unaltered performance when they undergo irregular and repeated strain deformation. Such strain-unaltered textile electronics require advanced fibers that simultaneously have high functionalities and extreme robustness as fabric materials. Current synthetic nanocomposite fibers based on inorganic matrix have remarkable functionalities but often suffer from low robustness and poor tolerance against crack formation. Here, we present a design for a high-performance multifunctional nanocomposite fiber that is mechanically and electrically robust, which was realized by crosslinking titanium carbide (MXene) nanosheets with a slide-ring polyrotaxane to form an internal mechanically-interlocked network. This inorganic matrix nanocomposite fiber featured distinct strain-hardening mechanical behavior and exceptional load-bearing capability (toughness approaching 60 MJ m^-3 and ductility over 27%). It retained 100% of its ductility after cyclic strain loading. Moreover, the high electrical conductivity (>1.1 × 10⁵ S m^-1 ) and electrochemical performance (>360 F cm^-3 ) of the nanocomposite fiber can be well retained after subjecting the fiber to extensive (>25% strain) and long-term repeated (10 000 cycles) dimensional changes. Such superior robustness allowed for the fabrication of the nanocomposite fibers into various robust wearable devices, such as textile-based electromechanical sensors with strain-unalterable sensing performance and fiber-shaped supercapacitors with invariant electrochemical performance for 10 000 strain loading cycles.

Aqueous spinning of robust, self-healable, and crack-resistant hydrogel microfibers enabled by hydrogen bond nanoconfinement

Robust damage-tolerant hydrogel fibers with high strength, crack resistance, and self-healing properties are indispensable for their long-term uses in soft machines and robots as load-bearing and actuating elements. However, current hydrogel fibers with inherent homogeneous structure are generally vulnerable to defects and cracks and thus local mechanical failure readily occurs across fiber normal. Here, inspired by spider spinning, we introduce a facile, energy-efficient aqueous pultrusion spinning process to continuously produce stiff yet extensible hydrogel microfibers at ambient conditions. The resulting microfibers are not only crack-insensitive but also rapidly heal the cracks in 30 s by moisture, owing to their structural nanoconfinement with hydrogen bond clusters embedded in an ionically complexed hygroscopic matrix. Moreover, the nanoconfined structure is highly energy-dissipating, moisture-sensitive but stable in water, leading to excellent damping and supercontraction properties. This work creates opportunities for the sustainable spinning of robust hydrogel-based fibrous materials towards diverse intelligent applications.

Graphene oxide for photonics, electronics and optoelectronics

Graphene oxide (GO) was initially developed to emulate graphene, but it was soon recognized as a functional material in its own right, addressing an application space that is not accessible to graphene and other carbon materials. Over the past decade, research on GO has made tremendous advances in material synthesis and property tailoring. These, in turn, have led to rapid progress in GO-based photonics, electronics and optoelectronics, paving the way for technological breakthroughs with exceptional performance. In this Review, we provide an overview of the optical, electrical and optoelectronic properties of GO and reduced GO on the basis of their chemical structures and fabrication approaches, together with their applications in key technologies such as solar energy harvesting, energy storage, medical diagnosis, image display and optical communications. We also discuss the challenges of this field, together with exciting opportunities for future technological advances.

Printing Structurally Anisotropic Biocompatible Fibrillar Hydrogel for Guided Cell Alignment

Many fibrous biological tissues exhibit structural anisotropy due to the alignment of fibers in the extracellular matrix. To study the impact of such anisotropy on cell proliferation, orientation, and mobility, it is important to recapitulate and achieve control over the structure of man-made hydrogel scaffolds for cell culture. Here, we report a chemically crosslinked fibrous hydrogel due to the reaction between aldehyde-modified cellulose nanofibers and gelatin. We explored two ways to induce structural anisotropy in this gel by extruding the hydrogel precursor through two different printheads. The cellulose nanofibers in the hydrogel ink underwent shear-induced alignment during extrusion and retained it in the chemically crosslinked hydrogel. The degree of anisotropy was controlled by the ink composition and extrusion flow rate. The structural anisotropy of the hydrogel extruded through a nozzle affected the orientation of human dermal fibroblasts that were either seeded on the hydrogel surface or encapsulated in the extruded hydrogel. The reported straightforward approach to constructing fibrillar hydrogel scaffolds with structural anisotropy can be used in studies of the biological impact of tissue anisotropy.

Nanoscale Kevlar Liquid Crystal Aerogel Fibers

Aerogel fibers, the simultaneous embodiment of aerogel porous network and fiber slender geometry, have shown critical advantages over natural and synthetic fibers in thermal insulation. However, how to control the building block orientation degree of the resulting aerogel fibers during the dynamic sol-gel transition process to expand their functions for emerging applications is a great challenge. Herein, nanoscale Kevlar liquid crystal (NKLC) aerogel fibers with different building block orientation degrees have been fabricated from Kevlar nanofibers via liquid crystal spinning, dynamic sol-gel transition, freeze-drying, and cold plasma hydrophobilization in sequence. The resulting NKLC aerogel fibers demonstrate extremely high mechanical strength (41.0 MPa), excellent thermal insulation (0.037 W·m^-1·K^-1), and self-cleaning performance (with a water contact angle of 154°). The superhydrophobic NKLC aerogel fibers can cyclically transform between aerogel and gel states, while gel fibers involving different building block orientation degrees display distinguishable brightness under polarized light. Based on these performances, digital textiles woven or embroidered with high- and low-orientated NKLC aerogel fibers enable up to 6.0 Gb information encryption in one square meter and on-demand decryption. Therefore, it can be envisioned that the tuning of the building blocks' orientation degree will be an appropriate strategy to endow performance to the liquid crystal aerogel fibers for potential applications beyond thermal insulation.

Manufacturing and post-engineering strategies of hydrogel actuators and sensors: From materials to interfaces

Living bodies are made of numerous bio-sensors and actuators for perceiving external stimuli and making movement. Hydrogels have been considered as ideal candidates for manufacturing bio-sensors and actuators because of their excellent biocompatibility, similar mechanical and electrical properties to that of living organs. The key point of manufacturing hydrogel sensors/actuators is that the materials should not only possess excellent mechanical and electrical properties but also form effective interfacial connections with various substrates. Traditional hydrogel normally shows high electrical resistance (~ MΩ•cm) with limited mechanical strength (<1 MPa), and it is prone to fatigue fracture during continuous loading-unloading cycles. Just like iron should be toughened and hardened into steel, manufacturing and post-treatment processes are necessary for modifying hydrogels. Besides, advanced design and manufacturing strategies can build effective interfaces between sensors/actuators and other substrates, thus enhancing the desired mechanical and electrical performances. Although various literatures have reviewed the manufacture or modification of hydrogels, the summary regarding the post-treatment strategies and the creation of effective electrical and mechanically sustainable interfaces are still lacking. This paper aims at providing an overview of the following topics: (i) the manufacturing and post-engineering treatment of hydrogel sensors and actuators; (ii) the processes of creating sensor(actuator)-substrate interfaces; (iii) the development and innovation of hydrogel manufacturing and interface creation. In the first section, the manufacturing processes and the principles for post-engineering treatments are discussed, and some typical examples are also presented. In the second section, the studies of interfaces between hydrogels and various substrates are reviewed. Lastly, we summarize the current manufacturing processes of hydrogels, and provide potential perspectives for hydrogel manufacturing and post-treatment methods.

2D-Topology-Seeded Graphitization for Highly Thermally Conductive Carbon Fibers

Highly thermally conductive carbon fibers (CFs) have become an important material to meet the increasing demand for efficient heat dissipation. To date, high thermal conductivity has been only achieved in specific pitch-based CFs with high crystallinity. However, obtaining high graphitic crystallinity and high thermal conductivity beyond pitch-CFs remains a grand challenge. Here, a 2D-topology-seeded graphitization method is presented to mediate the topological incompatibility in graphitization by seeding 2D graphene oxide (GO) sheets into the polyacrylonitrile (PAN) precursor. Strong mechanical strength and high thermal conductivity up to 850 W m^{- 1} K^-1 are simultaneously realized, which are one order of magnitude higher in conductivity than commercial PAN-based CFs. The self-oxidation and seeded graphitization effect generate large crystallite size and high orientation to far exceed those of conventional CFs. Topologically seeded graphitization, verified in experiments and simulations, allows conversion of the non-graphitizable into graphitizable materials by incorporating 2D seeds. This method extends the preparation of highly thermally conductive CFs, which has great potential for lightweight thermal-management materials.

Wide-Range Size Fractionation of Graphene Oxide by Flow Field-Flow Fractionation

Many interesting properties of 2D materials and their assembled structures are strongly dependent on the lateral size and size distribution of 2D materials. Accordingly, effective size separation of polydisperse 2D sheets is critical for desirable applications. Here, we introduce flow field-flow fractionation (FlFFF) for a wide-range size fractionation of graphene oxide (GO) up to 100 μm. Two different separation mechanisms are identified for FlFFF, including normal mode and steric/hyperlayer mode, to size fractionate wide size-distributed GOs while employing a crossflow field for either diffusion or size-controlled migration of GO. Obviously, the 2D GO sheet reveals size separation behavior distinctive from typical spherical particles arising from its innate planar geometry. We also investigate 2D sheet size-dependent mechanical and electrical properties of three different graphene fibers produced from size-fractionated GOs. This FlFFF-based size selection methodology can be used as a generic approach for effective wide-range size separation for 2D materials, including rGO, TMDs, and MXene.

Amphiphilic Polymers for Color Dispersion: Toward Stable and Low-Viscosity Inkjet Ink

Amphiphilic random and block copolymers were synthesized as potential inkjet inks. This study evaluated the potential of these polymers for color dispersion by examining the following factors: surface tension, zeta potential, viscosity, and particle size. Acrylic acid and (ethoxyethoxy)ethyl acrylate were used as the hydrophilic molecular units. Styrene, butyl acrylate, and phenoxyethyl acrylate were used as hydrophobic units. Color dispersions were prepared by using organic dye and these amphiphilic polymers. The color dispersions containing random copolymers exhibited low viscosity, which is preferable for jetting, but the dye particles tended to sediment after the thermal aging test. In contrast, those containing block copolymers showed high viscosity, which was unsuitable for jetting. However, they retained their initial dispersion state after the aging test. The advantages and disadvantages of each monomer arrangement (random or block) were demonstrated, providing a future outlook on the molecular design of polymer dispersants for color dispersions.

Molecular-Level Lubrication Effect of 0D Nanodiamonds for Highly Bendable Graphene Liquid Crystalline Fibers

Graphene fiber is emerging as a new class of carbon-based fiber with distinctive material properties particularly useful for electroconductive components for wearable devices. Presently, stretchable and bendable graphene fibers are principally employing soft dielectric additives, such as polymers, which can significantly deteriorate the genuine electrical properties of pristine graphene-based structures. We report molecular-level lubricating nanodiamonds as an effective physical property modifier to improve the mechanical flexibility of graphene fibers by relieving the tight interlayer stacking among graphene sheets. Nanoscale-sized NDs effectively increase the tensile strain and bending strain of graphene/nanodiamond composite fibers while maintaining the genuine electrical conductivity of pristine graphene-based fibers. The molecular-level lubricating mechanism is elucidated by friction force microscopy on the nanoscale as well as by shear stress measurement on the macroscopic scale. The resultant highly bendable graphene/nanodiamond composite fiber is successfully weaved into all graphene fiber-based textiles and wearable Joule heaters, proposing the potential for reliable wearable applications.

Multicomponent chiral hydrogel fibers with block configurations based on the chiral liquid crystals of cellulose nanocrystals and M13 bacteriophages

Integrating the advantages unique to CNCs and the M13 virus into blockwise chiral hydrogel fibers, which have block dependent chiral fingerprints, birefringence, (de)swelling behaviors, mechanical strength and stretchability.

Crystal Channel Engineering for Rapid Ion Transport: From Nature to Batteries

Ion transport behaviours through cell membranes are commonly identified in biological systems, which are crucial for sustaining life for organisms. Similarly, ion transport is significant for electrochemical ion storage in rechargeable batteries, which has attracted much attention in recent years. Rapid ion transport can be well achieved by crystal channels engineering, such as creating pores or tailoring interlayer spacing down to the nanometre or even sub-nanometre scale. Furthermore, some functional channels, such as ion selective channels and stimulus-responsive channels, are developed for smart ion storage applications. In this review, the typical ion transport phenomena in the biological systems, including ion channels and pumps, are first introduced, and then ion transport mechanisms in solid and liquid crystals are comprehensively reviewed, particularly for the widely studied porous inorganic/organic hybrid crystals and ultrathin inorganic materials. Subsequently, recent progress on the ion transport properties in electrodes and electrolytes is reviewed for rechargeable batteries. Finally, current challenges in the ion transport behaviours in rechargeable batteries are analysed and some potential research approaches, such as bioinspired ultrafast ion transport structures and membranes, are proposed for future studies. It is expected that this review can give a comprehensive understanding on the ion transport mechanisms within crystals and provide some novel design concepts on promoting electrochemical ion storage capability in rechargeable batteries.

A Highly Robust Ionotronic Fiber with Unprecedented Mechanomodulation of Ionic Conduction

Stretchable ionic conductors are appealing for tissue-like soft electronics, yet suffer from a tardy mechanoelectric response due to their poor modulation of ionic conduction arising from intrinsic homogeneous soft chain network. Here, a highly robust ionotronic fiber is designed by synergizing ionic liquid and liquid crystal elastomer with alternate rigid mesogen units and soft chain spacers, which shows an unprecedented strain-induced ionic conductivity boost (≈10³ times enhanced as stretched to 2000% strain). Such a surprisingly high enhancement is attributed to the formation of microphase-separated low-tortuosity ion-conducting nanochannels guided by strain-induced emergence of aligned smectic mesophases, thus allowing for ultrafast ion transport that resembles the role of "swimming lanes." Intriguingly, the boosting conductivity even reverses Pouillet's Law-dictated resistance increase at certain strains, leading to unique waveform-discernible strain sensing. Moreover, the fiber retains thermal actuation properties with a maximum of 70% strain changes upon heating, and enables integrated self-perception and actuation. The findings offer a promising molecular engineering route to mechanically modulate the ion transport behavior of ionic conductors toward advanced ionotronic applications.

Lightweight, Robust, Conductive Composite Fibers Based on MXene@Aramid Nanofibers as Sensors for Smart Fabrics

Developing one-dimensional fiber-based sensors to meet the requirement of spinnability, portability, flexibility, and easeful conformability in smart wearable devices has attracted increasing interest. Here, we report highly conductive MXene@aramid nanofibers (ANFs) with a distinct skin-core structure by the wet spinning method. MXene, an emerging 2D conductive material, is applied to build internal conductive paths. ANF frameworks function as protective and skeleton structures to reduce the fiber oxidation probability and achieve superior strength. The obtained MXene@ANF fiber with superior conductivity (2515 S m^-1) and tensile strength (130 MPa) works as a promising sensor for smart fabrics to detect different human movements with abundant detection motions, fast response time (100 ms), and long service life (up to 1000 cycles). Benefiting from its high flexibility, it can be sewn into textile and gloves as a smart wearable device. Besides superior thermal stability, it shows promising electrothermal properties with wide heating temperature (25-123 °C) and fast heating temperature (10 s). Therefore, the MXene@ANF fiber with the skin-core structure shows great potential as a promising sensor to be applied in electric heating and smart wearable fabrics.

Graphene Fiber-Based Wearable Supercapacitors: Recent Advances in Design, Construction, and Application

Fiber-based supercapacitors (FSCs) that display small volume, robust weavability, high power density, and long-term stability, have urgently become the indispensable power supplies in smart wearable industries. Graphene fiber is regarded as an ideal FSCs electrode due to its remarkable natures of anisotropic framework, adjustable layer spacing, porous structures, large specific-surface-area, processable electroactivity, and high electronical and mechanical properties. This review, mainly focuses on the graphene fiber-based supercapacitors (GFSCs), with respect to fiber preparation, micro-nanostructure modulation, supercapacitor construction, performance optimization, and wearable applications. Various fiber fabrication strategies, including wet-spinning, dry-spinning, film conversion, confined hydrothermal self-assembly, and microfluidic-spinning are presented for fiber's structure manipulation and large-scale production. Advanced nanostructures and electroactivity with various building principles, such as oriented alignment, porous network, hierarchical, and heterogeneous skeleton, engineered active-sites, and mechanical regulation are discussed for boosting charge transfer, and ionic kinetic diffusion and storage. Especially, the optimizing approaches for regular unit alignment, enhanced interlayer interactions, modulated structural nano-architecture are presented to deliver high capacitance and energy density. Moreover, the flexibility and stretchability of graphene fiber, together with wearable applications of power supply are highlighted. Finally, a short summary, current challenges and future perspectives for designing high energy density GFSCs are proposed.

Microstructure-Controlled Polyacrylonitrile/Graphene Fibers over 1 Gigapascal Strength

Controlling the microstructures in fibers, such as crystalline structures and microvoids, is a crucial challenge for the development of mechanically strong graphene fibers (GFs). To date, although GFs graphitized at high temperatures have exhibited high tensile strength, GFs still have limited the ultimate mechanical strength owing to the presence due to the structural defects, including the imperfect alignment of graphitic crystallites and the presence of microsized voids. In this study, we significantly enhanced the mechanical strength of GF by controlling microstructures of fibers. GF was hybridized by incorporating polyacrylonitrile (PAN) in the graphene oxide (GO) dope solution. In addition, we controlled the orientation of the inner structure by applying a tensile force at 800 °C. The results suggest that PAN can act as a binder for graphene sheets and can facilitate the rearrangement of the fiber's microstructure. PAN was directionally carbonized between graphene sheets due to the catalytic effect of graphene. The resulting hybrid GFs successfully displayed a high strength of 1.10 GPa without undergoing graphitization at extremely high temperatures. We believe that controlling the alignment of nanoassembled structure is an efficient strategy for achieving the inherent performance characteristics of graphene at the level of multidimensional structures including films and fibers.

Universal Alignment of Graphene Oxide in Suspensions and Fibers

Graphene oxide (GO) has become a key component for high-performance carbon-based films or fibers based on its dispersibility and liquid crystallinity in an aqueous suspension. While the superior performance of GO-based fiber relies on their alignment at the submicrometer level, fine control of the microstructure is often hampered, in particular, under dynamic nature of GO-processing involving shear. Here, we systemically studied the structural variation of GO suspensions under shear conditions via in situ rheo-scattering and shear-polarized optical microscope analysis. The evolution of GO alignment under shear is indeed complex. However, we found that the shear-dependent structural equilibrium exists. GO showed a nonlinear structural transition with shear, yet there is a "universal" shear threshold for the best alignment, resulting in graphene fiber achieved an improvement in mechanical properties by ∼54% without any chemical modification. This finding challenges the conventional concept that high shear stress is required for the good alignment of particles and their best performance.

Glycol-Thermal Continuous Flow Synthesis of Graphene Gel

Hydrothermal treatment of graphene oxide (GO) aqueous dispersion has been extensively applied to create graphene (a.k.a., chemically modified graphene, or reduced GO) hydrogels, which were dried to yield high-density graphene monoliths and powders with promising potential for electrochemical energy storage applications. Here, we demonstrated a glycol-thermal route that allows the preparation of a graphene gel at around 150 °C, which is below the boiling point of ethylene glycol (EG) and thus eliminates the need for a sealed pressurized reaction vessel. As a result, flow synthesis can be achieved by flowing a GO dispersion in EG through a Teflon tube immersed in a preheated oil bath for continuous production of a graphene gel, which, upon drying, shrinks to yield a densified graphene solid.

Bioinspired Fibers with Controlled Wettability: From Spinning to Application

Our knowledge on spider silks shows the importance of joining heterogeneous structures and surface chemical compositions in preparing fibers, fibrous surfaces, and 3D materials with a controllable wettability. We start our review with spider silk and proceed to the historical development of nature-inspired spinning processes, their products, and their advantages and disadvantages. Relevant wetting states are then summarized in fiber-based systems. Recent applications are reviewed, including one-dimensional spindle-knotted fibers for highly efficient fog harvesting, long-distance transport, and stimulus-responsive wettability and two-dimensional spindle-knotted fibrous systems for water collection, functional surfaces, and filtration. Finally, we offer some perspective on future research trends regarding biomimetic fibers for wetting-controlled engineering.

Assembly of Nanofluidic MXene Fibers with Enhanced Ionic Transport and Capacitive Charge Storage by Flake Orientation

MXenes are an emerging class of highly conductive two-dimensional (2D) materials with electrochemical storage features. Oriented macroscopic Ti₃C₂T_x fibers can be fabricated from a colloidal 2D nematic phase dispersion. The layered conductive Ti₃C₂T_x fibers are ideal candidates for constructing high-speed ionic transport channels to enhance the electrochemical capacitive charge storage performance. In this work, we assemble Ti₃C₂T_x fibers with a high degree of flake orientation by a wet spinning process with controlled spinning speeds and morphology of the spinneret. In addition to the effects of cross-linking of magnesium ions between Ti₃C₂T_x flakes, the electronic conductivity and mechanical strength of the as-prepared fibers have been improved to 7200 S cm^-1 and 118 MPa, respectively. The oriented Ti₃C₂T_x fibers present a volumetric capacitive charge storage capability of up to 1360 F cm^-3 even in a Mg-ion based neutral electrolyte, with contributions from both nanofluidic ion transport and Mg-ion intercalation pseudocapacitance. The oriented 2D Ti₃C₂T_x driven nanofluidic channels with great electronic conductivity and mechanical strength endows the MXene fibers with attributes for serving as conductive ionic cables and active materials for fiber-type capacitive electrochemical energy storage, biosensors, and potentially biocompatible fibrillar tissues.

Chemical Strategies for Making Strong Graphene Materials

Graphene materials have been widely applied in various fields because of their remarkable mechanical and electrical properties. However, two obstacles arise during the assembly of graphene platelets into macroscale graphene materials and composites that impair the performance of the resultant graphene materials: 1) the voids between the graphene platelets, and 2) the wrinkling of the graphene platelets. In the past decade, several strategies have been developed to eliminate these obstacles. These strategies result in strong macroscale graphene materials, such as graphene fibers with tensile strengths of over 3.4 GPa and sheets with tensile strengths of over 1.5 GPa, which have many practical applications. This Minireview summarizes the effective strategies for assembling graphene materials and compares their advantages and drawbacks. The preparation processes as well as the resulting fundamental mechanical properties and wide spectrum of electrical and magnetic properties are also discussed. Finally, our outlook for the future of this field is presented.

Highly Electroconductive and Mechanically Strong Ti3C2Tx MXene Fibers Using a Deformable MXene Gel

Self-assembly of two-dimensional MXene sheets is used in various fields to create multiscale structures due to their electrical, mechanical, and chemical properties. In principle, MXene nanosheets are assembled by molecular interactions, including hydrogen bonds, electrostatic interactions, and van der Waals forces. This study describes how MXene colloid nanosheets can form self-supporting MXene hydrogels. Three-dimensional network structures of MXene gels are strengthened by reinforced electrostatic interactions between nanosheets. Stable gel networks are beneficial for fabricating highly aligned fibers because MXene gel can endure structural deformation. During wet spinning of highly concentrated MXene colloids in a coagulation bath, MXene sheets can be transformed into perfectly aligned fibers under a mechanical drawing force. Oriented MXene fibers exhibit a 1.5-fold increase in electrical conductivity (12 504 S cm^-1) and Young's modulus (122 GPa) compared with other fibers. The oriented MXene fibers are expected to have widespread applications, including electrical wiring and signal transmission.

Carbon nanotube-reduced graphene oxide fiber with high torsional strength from rheological hierarchy control

High torsional strength fibers are of practical interest for applications such as artificial muscles, electric generators, and actuators. Herein, we maximize torsional strength by understanding, measuring, and overcoming rheological thresholds of nanocarbon (nanotube/graphene oxide) dopes. The formed fibers show enhanced structure across multiple length scales, modified hierarchy, and improved mechanical properties. In particular, the torsional properties were examined, with high shear strength (914 MPa) attributed to nanotubes but magnified by their structure, intercalating graphene sheets. This design approach has the potential to realize the hierarchical dimensional hybrids, and may also be useful to build the effective network structure of heterogeneous materials.

Highly Elastic Hydrated Cellulosic Materials with Durable Compressibility and Tunable Conductivity

Anisotropic cellular materials with direction-dependent structure and durable mechanical properties enable various applications (e.g., nanofluidics, biomedical devices, tissue engineering, and water purification), but their widespread use is often hindered by complex and scale-limited fabrication and unsatisfactory mechanical performance. Here, inspired by the anisotropic and hierarchical material structure of tendons, we demonstrate a facile, scalable top-down approach for fabricating a highly elastic, ionically conductive, anisotropic cellulosic material (named elastic wood) directly from natural wood via chemical treatment. The resulting elastic wood demonstrates good elasticity and durable compressibility, showing no sign of fatigue after 10 000 compression cycles. The chemical treatment not only softens the wood cell walls by partially removing lignin and hemicellulose but introduces an interconnected cellulose fibril network into the wood channels. Atomistic and continuum modeling further reveals that the absorbed water can freely and reversibly move inside the elastic wood and therefore helps the elastic wood accommodate large compressive deformation and recover to its original shape upon compression release. In addition, the elastic wood showed a high ionic conductivity of up to 0.5 mS cm^-1 at a low KCl concentration of 10^-4 M, which can be tuned by changing the compression ratio of the material. The demonstrated elastic, mechanically robust, and ionically conductive cellulosic material combining inherited anisotropic cellular structure from natural wood and a self-formed internal gel may find a variety of potential applications in ionic nanofluidics, sensors, soft robots, artificial muscle, environmental remediation, and energy storage.

Bioinspired wood-like coaxial fibers based on MXene@graphene oxide with superior mechanical and electrical properties

MXenes, a new class of two-dimensional materials with excellent performance, are promising materials for wearable energy storage devices. However, the lack of sufficient interaction between various MXene particles makes it difficult to translate the exceptional performance from the nanoscale to macroscale. Additionally, the intrinsic characteristic of easy oxidation limits their practical applications. Herein, inspired by the structure of wood, a biomimetic core-shell MXene@graphene oxide (MX@GO) fiber was fabricated using GO as a mechanical layer to wrap MXenes. The GO layer could easily assemble MXene particles into macroscale materials and protect them from oxidation. Therefore, the as-fabricated core-shell MX@GO fiber showed a high tensile strength (290 MPa) and excellent electrical conductivity (2400 S m-1). Notably, the conductivity of the biomimetic fiber only decreased to 1800 S m-1 with a reduction of about 30% at 100 °C. This work paves the way to fabricate MXene-based fibers with freely designed functionalities and morphologies, which are suitable for various high-value fabric-based applications.

Nanoscale Assembly of 2D Materials for Energy and Environmental Applications

Rational design of 2D materials is crucial for the realization of their profound implications in energy and environmental fields. The past decade has witnessed significant developments in 2D material research, yet a number of critical challenges remain for real-world applications. Nanoscale assembly, precise control over the orientational and positional ordering, and complex interfaces among 2D layers are essential for the continued progress of 2D materials, especially for energy storage and conversion and environmental remediation. Herein, recent progress, the status, future prospects, and challenges associated with nanoscopic assembly of 2D materials are highlighted, specifically targeting energy and environmental applications. Geometric dimensional diversity of 2D material assembly is focused on, based on novel assembly mechanisms, including 1D fibers from the colloidal liquid crystalline phase, 2D films by interfacial tension (Marangoni effect), and 3D nanoarchitecture assembly by electrochemical processes. Relevant critical advantages of 2D material assembly are highlighted for application fields, including secondary batteries, supercapacitors, catalysts, gas sensors, desalination, and water decontamination.

Chirally Reversed Graphene Oxide Liquid Crystals

Colloidal liquid crystals (LCs) formed by nanoparticles hold great promise for creating new structures and topologies. However, achieving highly ordered hierarchical architectures and stable topological configurations is extremely challenging, mainly due to the liquid-like fluidity of colloidal LCs in nature. Herein, an innovative synchronous nanofluidic rectification (SNR) technique for generating ultralong graphene oxide (GO) liquid crystal (GOLC) fibers with hierarchical core-skin architectures is presented, in which the GO sheet assemblies and hydrogel skin formation are synchronous. The SNR technique conceptually follows two design principles: horizontal polymer-flow promotes the rapid planar alignment of GO sheets and drives the chiral-reversing of cholesteric GOLCs, and in situ formed hydrogel skin affords some protection against environmental impact to maintain stable topological configurations. Importantly, the dried fibers retain the smooth surface and ordered internal structures, achieving high mechanical strength and flexibility. The linear and circular polarization potential of GOLC fibers are demonstrated for optical sensing and recognition. This work may open an avenue toward the scalable manufacture of uniform and robust, yet highly anisotropic, fiber-shaped functional materials with complex internal architectures.

Self-Planarization of High-Performance Graphene Liquid Crystalline Fibers by Hydration

Graphene fibers (GFs) are promising elements for flexible conductors and energy storage devices, while translating the extraordinary properties of individual graphene sheets into the macroscopically assembled 1D structures. We report that a small amount of water addition to the graphene oxide (GO) N-methyl-2-pyrrolidone (NMP) dispersion has significant influences on the mesophase structures and physical properties of wet-spun GFs. Notably, 2 wt % of water successfully hydrates GO flakes in NMP dope to form a stable graphene oxide liquid crystal (GOLC) phase. Furthermore, 4 wt % of water addition causes spontaneous planarization of wet-spun GFs. Motivated from these interesting findings, we develop highly electroconductive and mechanically strong flat GFs by introducing highly crystalline electrochemically exfoliated graphene (EG) in the wet-spinning of NMP-based GOLC fibers. The resultant high-performance hybrid GFs can be sewn on cloth, taking advantage of the mechanical robustness and high flexibility.

Microribbons composed of directionally self-assembled nanoflakes as highly stretchable ionic neural electrodes

Many natural materials possess built-in structural variation, endowing them with superior performance. However, it is challenging to realize programmable structural variation in self-assembled synthetic materials since self-assembly processes usually generate uniform and ordered structures. Here, we report the formation of asymmetric microribbons composed of directionally self-assembled two-dimensional nanoflakes in a polymeric matrix during three-dimensional direct-ink printing. The printed ribbons with embedded structural variations show site-specific variance in their mechanical properties. Remarkably, the ribbons can spontaneously transform into ultrastretchable springs with controllable helical architecture upon stimulation. Such springs also exhibit superior nanoscale transport behavior as nanofluidic ionic conductors under even ultralarge tensile strains (>1,000%). Furthermore, to show possible real-world uses of such materials, we demonstrate in vivo neural recording and stimulation using such springs in a bullfrog animal model. Thus, such springs can be used as neural electrodes compatible with soft and dynamic biological tissues.

Large-scale wet-spinning of highly electroconductive MXene fibers

Ti₃C₂T_x MXene is an emerging class of two-dimensional nanomaterials with exceptional electroconductivity and electrochemical properties, and is promising in the manufacturing of multifunctional macroscopic materials and nanomaterials. Herein, we develop a straightforward, continuously controlled, additive/binder-free method to fabricate pure MXene fibers via a large-scale wet-spinning assembly. Our MXene sheets (with an average lateral size of 5.11 μm²) are highly concentrated in water and do not form aggregates or undergo phase separation. Introducing ammonium ions during the coagulation process successfully assembles MXene sheets into flexible, meter-long fibers with very high electrical conductivity (7,713 S cm^-1). The fabricated MXene fibers are comprehensively integrated by using them in electrical wires to switch on a light-emitting diode light and transmit electrical signals to earphones to demonstrate their application in electrical devices. Our wet-spinning strategy provides an approach for continuous mass production of MXene fibers for high-performance, next-generation, and wearable electronic devices.

Continuous crystalline graphene papers with gigapascal strength by intercalation modulated plasticization

Graphene has an extremely high in-plane strength yet considerable out-of-plane softness. High crystalline order of graphene assemblies is desired to utilize their in-plane properties, however, challenged by the easy formation of chaotic wrinkles for the intrinsic softness. Here, we find an intercalation modulated plasticization phenomenon, present a continuous plasticization stretching method to regulate spontaneous wrinkles of graphene sheets into crystalline orders, and fabricate continuous graphene papers with a high Hermans' order of 0.93. The crystalline graphene paper exhibits superior mechanical (tensile strength of 1.1 GPa, stiffness of 62.8 GPa) and conductive properties (electrical conductivity of 1.1 × 105 S m-1, thermal conductivity of 109.11 W m-1 K-1). We extend the ultrastrong graphene papers to the realistic laminated composites and achieve high strength combining with attractive conductive and electromagnetic shielding performance. The intercalation modulated plasticity is revealed as a vital state of graphene assemblies, contributing to their industrial processing as metals and plastics.

Solvation-Involved Nanoionics: New Opportunities from 2D Nanomaterial Laminar Membranes

Nanoporous laminar membranes composed of multilayered 2D nanomaterials (2D-NLMs) are increasingly being exploited as a unique material platform for understanding solvated ion transport under nanoconfinement and exploring novel nanoionics-related applications, such as ion sieving, energy storage and harvesting, and in other new ionic devices. Here, the fundamentals of solvation-involved nanoionics in terms of ionic interactions and their effect on ionic transport behaviors are discussed. This is followed by a summary of key requirements for materials that are being used for solvation-involved nanoionics research, culminating in a demonstration of unique features of 2D-NLMs. Selected examples of using 2D-NLMs to address the key scientific problems related to nanoconfined ion transport and storage are then presented to demonstrate their enormous potential and capabilities for nanoionics research and applications. To conclude, a personal perspective on the challenges and opportunities in this emerging field is presented.

Graphene Foam Cantilever Produced via Simultaneous Foaming and Doping Effect of an Organic Coagulant

Inspired by the role of cellular structures, which give three-dimensional robustness to graphene structures, a new type of graphene cantilever with mechanical resilience is introduced. Here, NH₄SCN is incorporated into graphene oxide (GO) gel using it as a coagulant for GO fiber self-assembly, a foaming agent, and a dopant. Subsequent thermal treatment of the GO fiber at 600 °C results in the evolution of gaseous species from NH₄SCN, yielding internally porous graphene cantilevers (NS-GF cantilevers). The results reveal that NS-GF cantilevers are doped with N and S and thus exhibit higher electrical conductivity (150 S cm^-1) than that of their nonporous counterparts (38.4 S cm^-1). Unlike conventional fibers, the NS-GF cantilevers exhibit mechanical resilience by bending under applied mechanical force but reverting to the original position upon release. The tip of the NS-GF cantilevers is coated with magnetic Fe₃O₄ particles, and fast mechanical movement is achieved by applying the magnetic field. Since the NS-GF cantilevers are highly conductive and elastic, they are employed as bendable, magnetodriven electrical switches that could precisely read on/off signals for >10 000 cycles. Our approach suggests a robust fabrication strategy to prepare highly electroconductive and mechanically elastic foam structures by introducing unique organic foaming agents.

Room-Temperature, Highly Durable Ti3C2Tx MXene/Graphene Hybrid Fibers for NH3 Gas Sensing

Graphene-based fibers (GFs) have aroused enormous interest in portable, wearable electronics because of their excellent mechanical flexibility, electrical conductivity, and weavability, which make them advantageous for wearable electronic devices. Herein, we report the development of metal binder-free Ti₃C₂T_x MXene/graphene hybrid fibers by a scalable wet-spinning process. These hybrid fibers exhibit excellent mechanical and electrical properties for applications in flexible wearable gas sensors. The synergistic effects of electronic properties and gas-adsorption capabilities of MXene/graphene allow the created fibers to show high NH₃ gas sensitivity at room temperature. The hybrid fibers exhibited significantly improved NH₃ sensing response (ΔR/R₀ = 6.77%) compared with individual MXene and graphene. The hybrid fibers also showed excellent mechanical flexibility with a minimal fluctuation of resistance of ±0.2% and low noise resistance even after bending over 2000 cycles, enabling gas sensing during deformation. Furthermore, flexible MXene/graphene hybrid fibers were woven into a lab coat, demonstrating their high potential for wearable devices. We envisage that these exciting features of 2D hybrid materials will provide a novel pathway for designing next-generation portable wearable gas sensors.

Graphene-Based Fibers: Recent Advances in Preparation and Application

Graphene-based fibers (GBFs) are macroscopic 1D assemblies formed by using microscopic 2D graphene sheets as building blocks. Their unique structure exhibits the same merits as graphene such as low weight, high specific surface area, excellent mechanical/electrical properties, and ease of functionalization. Furthermore, the fibrous nature of GBFs is intrinsically compatible with existing textile technologies, making them suitable for applications in flexible and wearable electronics. Recently, novel synthetic methods have endowed GBFs with new structures and functions, further improving their mechanical and electrical properties. These improvements have rapidly bridged the gaps between laboratory demonstrations and real-life applications in fiber-shaped batteries, supercapacitors, and electrochemical sensors. Recent advances in the fabrication, optimization, and application of GBFs are systematically reviewed and a perspective on their future development is given.