Microbial reductive dechlorination of aroclor 1260 in Baltimore harbor sediment microcosms is catalyzed by three phylotypes within the phylum Chloroflexi

Effects of humic electron mediators on reductive dechlorination of polychlorinated biphenyl by consortia enriched from terrestrial and marine environments

Humic electron mediators can facilitate the reductive dehalogenation of organohalogenated compounds by accelerating electron transfer. To investigate the effect of humic electron mediators on the microbial anaerobic reductive dechlorination of Polychlorinated biphenyls (PCBs), three types of humic electron mediators, humin (HM), humic acid (HA), and anthraquinone-2,6-disulfonic acid (AQDS, HA analogs), were added to PCB dechlorination cultures enriched from different sources in terrestrial and marine environments (T and M cultures). The results showed that meta- and para-site dechlorination occurred in the M culture, while only meta-site dechlorination occurred in the T culture. The dechlorination process N and the dechlorination process H or H' are presented in both cultures. HM enhanced PCB dechlorination metabolic activity in both cultures mainly by promoting meta-site dechlorination. HA showed a weak promoting effect on the M culture by promoting para-chlorine removal but inhibited the dechlorination metabolism of the terrestrial-origin culture, inhibiting meta-chlorine removal. AQDS showed inhibitory effects on both cultures by inhibiting the microbial removal of meta-chlorine. High-throughput sequencing and qPCR results suggest that HM is not a carbon source for the potential dechlorinating metabolism of Dehalococcoides but may promote reductive dechlorination by changing the community structure, and AQDS may inhibit anaerobic reductive dechlorination of PCBs by inhibiting the growth of Dehalococcoides. This study provides insights into the mechanism of enhancing PCB microbial dechlorination mediated by humic substances and plays a significant role in extending the application prospects of PCBs bioremediation technology.

Modeled Pathways and Fluxes of PCB Dechlorination by Redox Potentials

Dechlorination is one of the main processes for the natural degradation of polychlorinated biphenyls (PCBs) in an anaerobic environment. However, PCB dechlorination pathways and products vary with PCB congeners, types of functional dechlorinating bacteria, and environmental conditions. The present study develops a novel model for determining dechlorination pathways and fluxes by tracking redox potential variability, transforming the complex dechlorination process into a stepwise sequence. The redox potential is calculated via the Gibbs free energy of formation, PCB concentrations in reactants and products, and environmental conditions. Thus, the continuous change in the PCB congener composition can be tracked during dechlorination processes. The new model is assessed against four measurements from several published studies on PCB dechlorination. The simulation errors in all four measurements are calculated between 2.67 and 35.1% under minimum (n = 0) and maximum (n = 34) numbers of co-eluters, respectively. The dechlorination fluxes for para-dechlorination pathways dominate PCB dechlorination in all measurements. Furthermore, the model also considers multiple-step dechlorination pathways containing intermediate PCB congeners absent in both the reactants and the products. The present study indicates that redox potential might be an appropriate indicator for predicting PCB dechlorination pathways and fluxes even without prior knowledge of the functional dechlorinating bacteria.

Microbiome resistance mediates stimulation of reduced graphene oxide to simultaneous abatement of 2,2',4,4',5-pentabromodiphenyl ether and 3,4-dichloroaniline in paddy soils

Paddy soils near electrical and electronic waste recycling sites generally suffer from co-pollution of polybrominated diphenyl ethers and 3,4-dichloroaniline (3,4-DCA). This study tested the feasibility of reduced graphene oxide (rGO) to stimulate the simultaneous abatement of 2,2',4,4',5-pentabromodiphenyl ether (BDE99) and 3,4-DCA in percogenic paddy soil (PPS) and hydromorphic paddy soil (HPS). rGO improved the debromination extent of BDE99 and the transformation rate of 3,4-DCA in PPS, but did not affect their abatement in HPS. The inhibition of specific fermenters, acetogens, and methanogens after rGO addition contributed to BDE99 debromination by obligate organohalide-respiring bacteria (OHRB) in PPS, but relevant soil microbiomes (e.g., fermenters, acetogens, methanogens, and obligate OHRB) responded little to rGO in HPS. For 3,4-DCA, the enhanced activities of nitrogen-metabolic chloroaniline degraders by rGO increased its transformation rate in PPS, but was compensated by the decreased biotransformation from 3,4-DCA to 3,4-dichloroacetanilide after the addition of rGO to HPS. The discrepant stimulation of rGO between PPS and HPS was mediated by soil microbiome resistance. rGO has the application potential to stimulate the simultaneous abatement of polybrominated diphenyl ethers and chloroanilines in paddy soils with relatively low microbiome resistance.

Higher ecological risks and lower bioremediation potentials identified for emerging OPEs than legacy PCBs in the Beibu Gulf, China

The production and use of organophosphate esters (OPEs) as substitutes for traditional halogenated flame retardants is increasing, resulting in greater global concern related to their ecological risks to marine environments. In this study, polychlorinated biphenyls (PCBs) and OPEs, representing traditional halogenated and emerging flame retardants, respectively, were studied in multiple environmental matrices in the Beibu Gulf, a typical semi-closed bay in the South China Sea. We investigated the differences in PCB and OPE distributions, sources, risks, and bioremediation potentials. Overall, the concentrations of emerging OPEs were much higher than those of PCBs in both seawater and sediment samples. Sediment samples from the inner bay and bay mouth areas (L sites) accumulated more PCBs, with penta- and hexa-CBs as major homologs. Chlorinated OPEs were prevalent in both seawater and sediment samples from the L sites, whereas tri-phenyl phosphate (TPHP) and tri-n-butyl phosphate (TNBP) were predominant at the outer bay (B sites) sediment samples. Source identification via principal component analysis, land use regression statistics, and δ13C analysis indicate that PCBs were mainly sourced from the atmospheric deposition of sugarcane and waste incineration, whereas sewage inputs, aquaculture, and shipping activity were identified as sources of OPE pollution in the Beibu Gulf. A half-year sediment anaerobic culturing experiment was performed for PCBs and OPEs, and the results only exhibited satisfactory dechlorination for PCBs. However, compared with the low ecological risks of PCBs to marine organisms, OPEs (particularly trichloroethyl phosphate (TCEP) and TPHP) exhibited low to medium threats to algae and crustaceans at most sites. Given their increasing usage, high ecological risks, and low bioremediation potential in enrichment cultures, pollution by emerging OPEs warrants close attention.

Polychlorinated Biphenyl Transformation, Peroxidase and Oxidase Activities of Fungi and Bacteria Isolated from a Historically Contaminated Site

Causing major health and ecological disturbances, polychlorinated biphenyls (PCBs) are persistent organic pollutants still recovered all over the world. Microbial PCB biotransformation is a promising technique for depollution, but the involved molecular mechanisms remain misunderstood. Ligninolytic enzymes are suspected to be involved in many PCB transformations, but their assessments remain scarce. To further inventory the capabilities of microbes to transform PCBs through their ligninolytic enzymes, we investigated the role of oxidase and peroxidase among a set of microorganisms isolated from a historically PCB-contaminated site. Among 29 isolated fungi and 17 bacteria, this work reports for the first time the PCB-transforming capabilities from fungi affiliated to Didymella, Dothiora, Ilyonectria, Naganishia, Rhodoturula, Solicoccozyma, Thelebolus and Truncatella genera and bacteria affiliated to Peribacillus frigotolerans, Peribacillus muralis, Bacillus mycoides, Bacillus cereus, Bacillus toyonensis, Pseudarthrobacter sp., Pseudomonas chlororaphis, Erwinia aphidicola and Chryseobacterium defluvii. In the same way, this is the first report of fungal isolates affiliated to the Dothiora maculans specie and Cladosporium genus that displayed oxidase (putatively laccase) and peroxidase activity, respectively, enhanced in the presence of PCBs (more than 4-fold and 20-fold, respectively, compared to controls). Based on these results, the observed activities are suspected to be involved in PCB transformation.

Photo-aging promotes the inhibitory effect of polystyrene microplastics on microbial reductive dechlorination of a polychlorinated biphenyl mixture (Aroclor 1260)

Polychlorinated biphenyls (PCBs) and microplastics (MPs) commonly co-exist in various environments. MPs inevitably start aging once they enter environment. In this study, the effect of photo-aged polystyrene MPs on microbial PCB dechlorination was investigated. After a UV aging treatment, the proportion of oxygen-containing groups in MPs increased. Photo-aging promoted the inhibitory effect of MPs on microbial reductive dechlorination of PCBs, mainly attributed to the inhibition of meta-chlorine removal. The inhibitory effects on hydrogenase and adenosine triphosphatase activity by MPs increased with increasing aging degree, which may be attributed to electron transfer chain inhibition. PERMANOVA showed significant differences in microbial community structure between culturing systems with and without MPs (p < 0.05). Co-occurrence network showed a simpler structure and higher proportion of negative correlation in the presence of MPs, especially for biofilms, resulting in increased potential for competition among bacteria. MP addition altered microbial community diversity, structure, interactions, and assembly processes, which was more deterministic in biofilms than in suspension cultures, especially regarding the bins of Dehalococcoides. This study sheds light on the microbial reductive dechlorination metabolisms and mechanisms where PCBs and MPs co-exist and provides theoretical guidance for in situ application of PCB bioremediation technology.

Resuscitation-Promoting Factor Accelerates Enrichment of Highly Active Tetrachloroethene/Polychlorinated Biphenyl-Dechlorinating Cultures

The anaerobic bioremediation of polychlorinated biphenyls (PCBs) is largely impeded by difficulties in massively enriching PCB dechlorinators in short periods of time. Tetrachloroethene (PCE) is often utilized as an alternative electron acceptor to preenrich PCB-dechlorinating bacteria. In this study, resuscitation promoting factor (Rpf) was used as an additive to enhance the enrichment of the microbial communities involved in PCE/PCBs dechlorination. The results indicated that Rpf accelerates PCE dechlorination 3.8 to 5.4 times faster than control cultures. In Aroclor 1260-fed cultures, the amendment of Rpf enables significantly more rapid and extensive dechlorination of PCBs. The residual high-chlorinated PCB congeners (≥5 Cl atoms) accounted for 36.7% and 59.8% in the Rpf-amended cultures and in the corresponding controls, respectively. This improvement was mainly attributed to the enhanced activity of the removal of meta-chlorines (47.7 mol % versus 14.7 mol %), which did not appear to affect dechlorination pathways. The dechlorinators, including Dehalococcoides in Chloroflexi and Desulfitobacterium in Firmicutes, were greatly enriched via Rpf amendment. The abundance of nondechlorinating populations, including Methanosarcina, Desulfovibrio, and Bacteroides, was also greatly enhanced via Rpf amendment. These results suggest that Rpf serves as an effective additive for the rapid enrichment of active dechlorinating cultures so as to provide a new approach by which to massively cultivate bioinoculants for accelerated in situ anaerobic bioremediation. IMPORTANCE The resuscitation promoting factor (Rpf) of Micrococcus luteus has been reported to resuscitate and stimulate the growth of functional microorganisms that are involved in the aerobic degradation of polychlorinated biphenyls (PCBs). However, few studies have been conducted to investigate the role of Rpf on anaerobic microbial populations. In this study, the enhancement of Rpf on the anaerobic microbial dechlorination of PCE/PCBs was discovered. Additionally, the Rpf-responsive populations underlying the enhanced dechlorination were uncovered. This report reveals the rapid enrichment of active dechlorinating cultures via Rpf amendment, and this sheds light on massively enriching PCB dechlorinators in short periods of time. The enhanced in situ anaerobic bioremediation of PCBs could be expected by supplementing Rpf.

Effect of the degradation performance on carbon tetrachloride by anaerobic co-metabolism under different external energy sources

In this research, a comprehensive study was carried out on the removal of carbon tetrachloride (CT) in the anaerobic co-metabolism (ACM) reactor. The experiments showed that when the hydraulic retention time (HRT) was 36 h, pH was 7, and influent CT was 2.5mg/L, the average removal efficiency reached 82.45 ± 2.56% in the glucose co-metabolism substrate reactor, exhibiting a dramatic excellent difference in reaction performance from the other two reactors (p < 0.05) and a favorable tolerance on the CT shock loading. The content of extracellular polymeric substances (EPS) and volatile fatty acids (VFA) demonstrated that glucose could supply more energy to protect the microorganisms, which was the appropriate external energy source. Moreover, microbial community structure and biostatistics analysis demonstrated that Pseudomonas was the most important dechlorination bacteria in ACM reactors, which might via dehalogenation process mediate the transformation of CT. The succession of methanogenic bacteria further demonstrated that CT degradation using co-digestion require to destroy hydrogenotrophic methane generation pathway and the external energy substances could make up the lack of hydrogen in the treatment of CT. The change of intermediate products hinted that anaerobic dechlorination process of CT in an ACM reactor was a sequential dechlorination process, and major transformation products measured were CF. Overall, this study has improved our understanding of the roles of CT degradation process in ACM reactors.

Effect of microplastics on microbial dechlorination of a polychlorinated biphenyl mixture (Aroclor 1260)

Microplastics (MPs) and polychlorinated biphenyls (PCBs) generally coexist in the environment, posing risks to public health and the environment. This study investigated the effect of different MPs on the microbial anaerobic reductive dechlorination of Aroclor 1260, a commercial PCB mixture. MP exposure inhibited microbial reductive dechlorination of PCBs, with inhibition rates of 39.43%, 23.97%, and 17.53% by polyethylene (PE), polypropylene (PP), and polystyrene (PS), respectively. The dechlorination rate decreased from 1.63 μM Cl^- d^-1 to 0.99-1.34 μM Cl^- d^-1 after MP amendment. Chlorine removal in the meta-position of PCBs was primarily inhibited by MPs, with no changes in the final PCB dechlorination metabolites. The microbial community compositions in MP biofilms were not significantly different (P > 0.05) from those in suspension culture, although possessing greater Dehalococcoides abundance (0.52-0.81% in MP biofilms; 0.03-0.12% in suspension culture). The co-occurrence network analysis revealed that the presence of MPs attenuated microbial synergistic interactions in the dechlorinating culture systems, which may contribute to the inhibitory effect on microbial PCB dechlorination. These findings are important for comprehensively understanding microbial dechlorination behavior and the environmental fate of PCBs in environments with co-existing PCBs and MPs and for guiding the application of in situ PCB bioremediation.

Dehalobium species implicated in 2,3,7,8-tetrachlorodibenzo-p-dioxin dechlorination in the contaminated sediments of Sydney Harbour Estuary

Polychlorinated dibenzo-p-dioxins and furans (PCDD/F) are some of the most environmentally recalcitrant and toxic compounds. They occur naturally and as by-products of anthropogenic activity. Sydney Harbour Estuary (Sydney, Australia), is heavily contaminated with PCDD/F. Analysis of sediment cores revealed that the contamination source area in Homebush Bay continues to have one of the highest levels of PCDD/F contamination in the world (5207 pg WHO-TEQ g^-1) with >50% of the toxicity attributed to 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD), the most toxic PCDD/F congener. Comparison of congener profiles at the contamination source area with surrounding bays and historical data provided evidence for the attenuation of 2,3,7,8-TCDD and other congeners at the source area. This finding was supported by the detection of di-, mono- and unchlorinated dibenzo-p-dioxin. Microbial community analysis of sediments by 16S rRNA amplicon sequencing revealed an abundance of lineages from the class Dehalococcoidia (up to 15% of the community), including the genus Dehalobium (up to 0.5%). Anaerobic seawater enrichment cultures using perchloroethene as more biologically available growth substrate enriched the Dehalobium population by more than six-fold. The enrichment culture then proved capable of reductively dechlorinating 2,3,7,8-TCDD to 2,3,7-TriCDD and octachlorodibenzo-p-dibenzodioxin (OCDD) to hepta and hexa congeners. This work is the first to show microbial reductive dehalogenation of 2,3,7,8-TCDD with a bacterium from outside the Dehalococcoides genus, and one of only a few that demonstrates PCDD/F dechlorination in a marine environment.

Long-Term Dechlorination of Polychlorinated Biphenyls (PCBs) in Taihu Lake Sediment Microcosms: Identification of New Pathways, PCB-Driven Shifts of Microbial Communities, and Insights into Dechlorination Potential

Microbial reductive dechlorination of polychlorinated biphenyls (PCBs) is regarded as an alternative approach for in situ remediation and detoxification in the environment. To better understand the process of PCB dechlorination in freshwater lake sediment, a long-term (108 weeks) dechlorination study was performed in Taihu Lake sediment microcosms with nine parent PCB congeners (PCB5, 12, 64, 71, 105, 114, 149, 153, and 170). Within 108 weeks, the total PCBs declined by 32.8%, while parent PCBs declined by 84.8%. PCB dechlorinators preferred to attack meta- and para-chlorines, principally para-flanked meta and single-flanked para chlorines. A total of 58 dechlorination pathways were observed, and 20 of them were not in 8 processes, suggesting the broad spectrum of PCB dechlorination in the environment. Rare ortho dechlorination was confirmed to target the unflanked ortho chlorine, indicating a potential for complete dechlorination. PCBs drove the shifts of the microbial community structures, and putative dechlorinating bacteria were growth-linked to PCB dechlorination. The distinct jump of RDase genes ardA, rdh12, pcbA4, and pcbA5 was found to be consistent with the commencement of dechlorination. The maintained high level of putative dechlorinating phylum Chloroflexi (including Dehalococcoides and o-17/DF-1), genus Dehalococcoides, and four RDase genes at the end of incubation revealed the long-term dechlorination potential. This work provided insights into dechlorination potential for long-term remediation strategies at PCB-contaminated sites.

Electrostimulated bio-dechlorination of a PCB mixture (Aroclor 1260) in a marine-originated dechlorinating culture

Aroclor 1260, a commercial polychlorinated biphenyl (PCB) mixture, is highly recalcitrant to biotransformation. A negatively polarized cathode (-0.35 V vs. standard hydrogen electrode) was applied for the first time to a marine-origin PCB dechlorinating culture that substantially increased the microbial dechlorination rate of Aroclor 1260 (from 8.6 to 11.6 μM Cl^- d^-1); meta-chlorine removal was stimulated and higher proportions of tetra-CBs (43.2-46.6%), the predominant dechlorination products, were observed compared to the open circuit conditions (23.7-25.1%). The dechlorination rate was further enhanced (14.1 μM Cl^- d^-1) by amendment with humin as a solid-phase redox mediator. After the suspension culture was renewed using an anaerobic medium, dechlorination activity was effectively maintained solely by cathodic biofilms, where cyclic voltammetry results indicated their redox activity. Electric potential had a significant effect on microbial community structure in the cathodic biofilm, where a greater abundance of Dehalococcoides (2.59-3.02%), as potential dechlorinators, was observed compared to that in the suspension culture (0.41-0.55%). Moreover, Dehalococcoides adhering to the cathode showed a higher chlorine removal rate than in the suspension culture. These findings provide insights into the dechlorination mechanism of cathodic biofilms involving Dehalococcoides for PCB mixtures and extend the application prospects of bioremediation to PCB contamination in the natural environment.

Acceleration of polychlorinated biphenyls remediation in soil via sewage sludge amendment

Bioremediation of polychlorinated biphenyls (PCBs) is impeded by difficulties in massively cultivating bioinoculant. Meanwhile, sewage sludge is rich in pollutant-degrading microorganisms and nutrients, drawing our attention to investigate their potential to be used as a supplement for bioremediation of PCBs. Here we reported extensive microbial reductive dechlorination of PCBs by waste activated sludge (WAS) and digestion sludge (DS), which were identified to harbor multiple putative organohalide-respiring bacteria (i.e., Dehalococcoides, Dehalogenimonas, Dehalobacter, and uncultivated Dehalococcoidia) and PCB reductive dehalogenase genes (i.e., pcbA4 and pcbA5). Consequently, amendment of 1-20% (w/w) fresh WAS/DS enhanced the attenuation of PCBs by 126-544% in a soil microcosm compared with the control soil, with the fastest dechlorination of PCBs being achieved when spiked with 20% fresh WAS. Notably, dechlorination pathways of PCBs were also changed by sludge amendment. Microbial and physicochemical analyses revealed that the enhanced dechlorination of PCBs by sludge amendment was largely attributed to the synergistic effects of sludge-derived nutrients, PCB-dechlorinating bacteria, and stimulated growth of beneficial microorganisms (e.g., fermenters). Finally, risk assessment of heavy metals suggests low potential ecological risks of sludge amendment in soil. Collectively, our study demonstrates that sewage sludge amendment could be an efficient, cost-effective and environment-friendly approach for in situ bioremediation of PCBs.

Potential Environmental Risk Characteristics of PCB Transformation Products in the Environmental Medium

The complementary construction of polychlorinated biphenyl (PCB) phytotoxicity and the biotoxicity 3D-QSAR model, combined with the constructed PCB environmental risk characterization model, was carried out to evaluate the persistent organic pollutant (POP) properties (toxicity (phytotoxicity and biotoxicity), bioconcentration, migration, and persistence) of PCBs and their corresponding transformation products (phytodegradation, microbial degradation, biometabolism, and photodegradation). The transformation path with a significant increase in environmental risks was analyzed. Some environmentally friendly PCB derivatives, exhibiting a good modification effect, and their parent molecules were selected as precursor molecules. Their transformation processes were simulated and evaluated for assessing the environmental risks. Some transformation products displayed increased environmental risks. The environmental risks of plant degradation products of the PCBs in the environmental media showed the maximum risk, indicating that the potential risks of the transformation products of the PCBs and their environmentally friendly derivatives could not be neglected. It is essential to further improve the ability of plants to degrade their transformation products. The improvement of some degradation products for environmentally friendly PCB derivatives indicates that the theoretical modification of a single environmental feature cannot completely control the potential environmental risks of molecules. In addition, this method can be used to analyze and evaluate environmentally friendly PCB derivatives to avoid and reduce the potential environmental and human health risks caused by environmentally friendly PCB derivatives.

Screening and metabolic potential of fungal strains isolated from contaminated soil and sediment in the polychlorinated biphenyl degradation

Polychlorinated biphenyls (PCBs) are widespread persistent pollutants deleterious for environment and very dangerous for human kind. As the bioremediation of PCB polluted sites by model white-rot fungi is still unsatisfactory, the use of efficient native strains which have the natural capacity to develop on polluted sites may constitute a relevant alternative strategy. In this study, we isolated 12 fungal strains from PCB contaminated soil and sediment, improved the screening method to obtain the most efficient ones in biodegradation and detoxification of PCBs and characterized potential underlying enzymatic activities. Four strains Penicillium chrysogenum, P. citreosulfuratum, P. canescens and Aspergillus jensenii, showed remarkable biodegradation capacities, greater than 70%. The remaining PCB-toxicity of their culture, including that of Trametes versicolor and Acremonium sclerotigenum, which present interesting ecological and metabolic properties, was studied. Only P. canescens was able to significantly reduce the toxicity related to PCBs and their metabolites. The enzymatic activities induced by PCBs were different according to the strains, namely laccases in T. versicolor and peroxidases in Ac. sclerotigenum. Our promising results show that the use of native fungal strains can constitute an effective strategy in the depollution of PCB polluted sites.

Sources of polychlorinated biphenyls to Upper Hudson River sediment post-dredging

The Upper Hudson River (UHR) has been contaminated with polychlorinated biphenyls (PCBs) since the 1940s due to the manufacture of capacitors at two plants near Hudson Falls and Fort Edward, NY by General Electric (GE). Dredging of portions of the UHR was conducted from 2009 to 2015 as a partial remedy for this contamination. In 2017, the New York State Department of Environmental Conservation undertook a comprehensive post-dredging survey of sediment contamination in the UHR. Thousands of samples were collected, and 130 of these were analyzed for PCBs using EPA method 1668A. This data set was analyzed using Positive Matrix Factorization. Six factors were observed. One factor resembled the dominant Aroclors used by GE with little alteration. Three factors represented different pathways and/or extents of microbial dechlorination. One factor resembled a mixture of microbial dechlorination products and a higher molecular weight Aroclor used by GE. The congener patterns of the dechlorination factors suggest that removal of chlorines at the ortho position does occur in the UHR sediment, in agreement with several laboratory studies showing that such ortho dechlorination is possible. This ortho dechlorination could theoretically lead to complete dechlorination of PCBs to biphenyl in UHR sediment. Only one factor was not attributable to GE. It represents inputs of PCBs from tributaries and urban areas and explains 1.7% of the PCB mass in the sediments. The small contribution from the non-GE PCB source suggests that recontamination of the sediment after dredging was minor.

A screening of select toxic and essential elements and persistent organic pollutants in the fur of Svalbard reindeer

Reindeers play an important role in the polar ecosystem, being long-lived sole vegetarians feeding on local vegetation. They can be used as a valuable bioindicator, helping us to understand contaminants' impact on the polar terrestrial ecosystem. Still, scarce data exist from research in which polar herbivores (especially those from the European parts of the Arctic) were a major study subject for trace elements and persistent organic pollutant determination. Here, Svalbard reindeer fur has been used to determine metals, non-metals and metalloids using ICP-MS, and several persistent organic pollutants including polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) using gas chromatography coupled to a tandem mass spectrometer (GC-MS/MS). Samples were collected from reindeer populations living in the area near Ny-Ålesund and Longyearbyen. Essential elements like Fe, Mg, Zn, K, Ca, Cu predominated in the trace elements profile. Median values of As, Cd, Co, Li, Ni, Se and V were all below 0.5 μg/g dw. Mercury was below detection limit in all samples, while the Pb median varied from 0.35 to 0.74 μg/g dw. Except acenaphthylene and fluorene, PAHs were detectable only in samples collected in the vicinity of Longyearbyen. Of 15 studied pesticides, only DDT and its metabolites were above the detection limit, and, of PCBs, only PCB28.

Microcosm Experiment to Assess the Capacity of a Poplar Clone to Grow in a PCB-Contaminated Soil

Polychlorinated byphenyls (PCBs) are a class of Persistent Organic Pollutants extremely hard to remove from soil. The use of plants to promote the degradation of PCBs, thanks to synergic interactions between roots and the natural soil microorganisms in the rhizosphere, has been proved to constitute an effective and environmentally friendly remediation technique. Preliminary microcosm experiments were conducted in a greenhouse for 12 months to evaluate the capacity of the Monviso hybrid poplar clone, a model plant for phytoremediation, to grow in a low quality and PCB-contaminated soil in order to assess if this clone could be subsequently used in a field experiment. For this purpose, three different soil conditions (Microbiologically Active, Pre-sterilized and Hypoxic soils) were set up in order to assess the capacity of this clone to grow in the polluted soil in these different conditions and support the soil microbial community activity. The growth and physiology (chlorophyll content, chlorophyll fluorescence, ascorbate, phenolic compounds and flavonoid contents) of the poplar were determined. Moreover, chemical analyses were performed to assess the concentrations of PCB indicators in soil and plant roots. Finally, the microbial community was evaluated in terms of total abundance and activity under the different experimental conditions. Results showed that the poplar clone was able to grow efficiently in the contaminated soil and to promote microbial transformations of PCBs. Plants grown in the hypoxic condition promoted the formation of a higher number of higher-chlorinated PCBs and accumulated lower PCBs in their roots. However, plants in this condition showed a higher stress level than the other microcosms, producing higher amounts of phenolic, flavonoid and ascorbate contents, as a defence mechanism.

Polychlorinated biphenyls in stormwater sediments: Relationships with land use and particle characteristics

Polychlorinated biphenyls (PCBs) are classified as persistent organic pollutants (POPs). Concentrations of 209 PCB congeners as well as profiles of the ten homologues were determined in stormwater sediments collected from various (primarily roadway) sites with different land use. The total PCB concentrations ranged from 8.3 to 57.4 ng/g dry weight (dw), with a mean value of 29.2 ng/g dw. PCB concentrations varied with nearby land use. Higher stormwater sediment PCB concentrations were found in dense urban areas (average: 39.8 ± 10.5 ng/g) and residential areas (average: 35.3 ± 6.2 ng/g) compared to highways passing through greenspace (average: 18.0 ± 0.4 ng/g). The number of chlorines per biphenyl ranged from 3.63 to 5.39 and the toxic equivalency (TEQs) of the PCBs were between 1.5 and 18.0 pg/g at all sites. A non-Aroclor congener, PCB 11, was detected in all samples and was dominant at two sites. PCBs were sorbed to smaller stormwater particulate matter (≤75 μm) at higher concentrations compared to larger particles (>75 μm). PCB sorption tended to increase with the total organic carbon (TOC) of the particulate matter in the sediment samples. However, greater PCB mass (almost 80%) was present in the larger particles. Information on sediment PCB concentrations from different land uses, along with stormwater particulate matter data can allow the estimation of PCB loads and load reductions using stormwater control measures.

Trace elements and polychlorinated biphenyls (PCBs) in terrestrial compartments of Svalbard, Norwegian Arctic

Despite being a remote location, the Arctic is a major receptor for anthropogenic pollution transported from the mid-latitudes. Vegetation and underlying organic soils in the Norwegian Arctic, Svalbard were used to study the occurrences of polychlorinated biphenyls (PCBs) and trace elements. In this study, current concentrations of PCBs and trace elements, namely, Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, S, Sb, U and Zn in the terrestrial compartments of Svalbard are presented. Samples were collected from Adventdalen near Longyearbyen and from areas in proximity to Ny-Ålesund. There was significant variability in soil organic matter (SOM) among the soils analysed (5.0%-72.1%), with the highest values detected in Ny-Ålesund. The concentrations of Al, As, Cr Cu, Fe, Pb and Ni were associated with the geology of the local bedrock. The concentrations of all elements, except for Cd, Hg and Zn, were higher in soils than those in the overlying vegetation layers. Mean concentrations of ∑PCBs were significantly higher in vegetation (6.90 ± 0.81 ng g^-1 dw) than the underlying organic soils (3.70 ± 0.36 ng g^-1 dw). An inverse correlation of PCBs with the elements originating from the local bedrock indicated that their concentrations were potentially impacted by atmospheric deposition. PCBs and Cd were strongly associated, proposing a potential concomitant source of origin in Svalbard. Concentrations of PCBs and trace elements measured herein were below the proposed guidelines for Norwegian soil quality.

Reduction in sulfate inhibition of microbial dechlorination of polychlorinated biphenyls in Hudson and Grasse River sediments through fatty acid supplementation

Microbial dechlorination of polychlorinated biphenyls (PCBs) in aquatic sediments may reduce the need for dredging for remediation. To better understand this biotransformation route under different geochemical conditions, the influence of sulfate on dechlorination in sediments from the Hudson River and the Grasse River spiked with two PCB mixtures (PCB 5/12, 64/71, 105/114 and 149/153/170 in Mixture 1 and PCB 5/12, 64/71, 82/97/99, 144/170 in Mixture 2) was investigated. The results showed that PCB dechlorination was partially inhibited in the sulfate-amended sediment microcosms. The rate, extent and preference of dechlorination were mainly controlled by the indigenous differences (sulfate, carbon content etc.) in sediment, but also affected by the PCB mixture composition. An increase of Dehalococcoides 16S rRNA genes coincided with the resumption of dechlorination. Dechlorination preferences were identified using a modified dechlorination pathway analysis approach. The low carbon content and high background sulfate Hudson sediment exhibited more para dechlorination targeting flanked para chlorines. The high carbon content and low background sulfate Grasse sediment preferentially removed more para-flanked meta chlorines than flanked para chlorines. The supplementation of fatty acids (acetate or a mixture of acetate, propionate and butyrate) dramatically increased PCB dechlorination in the Grasse sediment by resuming ortho-flanked meta dechlorination. Rare ortho removals were found in the Grasse sediment after adding fatty acids. This study suggests that supplementary fatty acids might be used to stimulate PCB dechlorination under sulfate reducing conditions, but the effectiveness largely depends on sediment geochemistry.

Assessment of PCB contamination, the potential for in situ microbial dechlorination and natural attenuation in an urban watershed at the East Coast of the United States

Sediment contamination is a major environmental issue in many urban watersheds and coastal areas due to the potential toxic effects of contaminants on biota and human health. Characterizing and delineating areas of sediment contamination and toxicity are important goals of coastal resource management in terms of ecological and economical perspectives. Core and surficial sediment samples were collected from an industrialized urban watershed at the East Coast of the United Stated and analyzed to evaluate the PCB contamination profile and toxicity resulting from dioxin-like PCBs as well as reductive dechlorination potential of indigenous PCB halorespiring bacteria through dechlorination activity assays. To support the experimental results an anaerobic dechlorination model was applied to identify microbial dechlorination pathways. The total PCB concentration in core samples ranged from 3.9 to 225.6 ng/g·dry weight (dw) decreasing with depth compared to 353.2 to 1213.7 ng/g·dw in surficial samples. The results of this study indicated an increase in PCB contamination over the last century as the industrial activity intensified. The toxicity resulting from dioxin-like PCBs was reduced up to 94% in core samples via 21 pathways resulting from the dechlorination model. Dechlorination rates in surficial sediment were between 1.8 and 13.2 · 10^-3 mol% PCB116/day, while lower rates occurred in the core sediment samples. Dechlorination was achieved mainly through meta followed by para dechlorination. However, the rarer ortho dechlorination was also observed. Detection of indigenous PCB dechlorinating bacteria in the sediments and reduction of toxicity indicated potential for natural attenuation when point and nonpoint source PCBs in the urban watershed are controlled and PCB loading reduced.

Bacterial community assemblages in sediments under high anthropogenic pressure at Ichkeul Lake/Bizerte Lagoon hydrological system, Tunisia

Bacterial communities inhabiting sediments in coastal areas endure the effect of strong anthropogenic pressure characterized by the presence of multiple contaminants. Understanding the effect of pollutants on the organization of bacterial communities is of paramount importance in order to unravel bacterial assemblages colonizing specific ecological niches. Here, chemical and molecular approaches were combined to investigate the bacterial communities inhabiting the sediments of the Ichkeul Lake/Bizerte Lagoon, a hydrological system under anthropogenic pressure. Although the microbial community of the Ichkeul Lake sediment was different to that of the Bizerte Lagoon, common bacterial genera were identified suggesting a lake-lagoon continuum probably due to the hydrology of the system exchanging waters according to the season. These genera represent bacterial "generalists" maintaining probably general biogeochemical functions. Linear discriminant analysis effect size (LEfSe) showed significant differential abundance distribution of bacterial genera according to the habitat, the pollution type and level. Further, correlation analyses identified specific bacterial genera which abundance was linked with pesticides concentrations in the lake, while in the lagoon the abundance of specific bacterial genera was found linked with the concentrations of PAHs (Polycyclic aromatic hydrocarbons) and organic forms of Sn. As well, bacterial genera which abundance was not correlated with the concentrations of pollutants were identified in both lake and lagoon. These findings represent valuable information, pointing out specific bacterial genera associated with pollutants, which represent assets for developing bacterial tools for the implementation, the management, and monitoring of bioremediation processes to mitigate the effect of pollutants in aquatic ecosystems.

Kinetics of PCB Microbial Dechlorination Explained by Freely Dissolved Concentration in Sediment Microcosms

While microbial dechlorination of polychlorinated biphenyls (PCBs) has been observed in sediments over the last 3 decades, translation to the field has been difficult due to a lack of a clear understanding of the kinetic limitations. To address this issue, the present study used passive dosing/sampling to accurately measure the biological rate of dechlorination of 2,3,4,5-tetrachlorobiphenyl (PCB 61) to 2,3,5-trichlorobiphenyl (PCB 23) by an organohalide-respiring bacterium, Dehalobium chlorocoercia (DF-1). The biological rates were measured over an environmentally relevant concentration range of 1-50 ng/L of freely dissolved concentrations with and without the presence of sediment in bench-scale microcosm studies. The rate of dechlorination was found to be linearly dependent on the freely dissolved concentration of PCB 61 both in sediment and in sediment-free microcosms. The observed rate of dechlorination in sediment microcosms could be predicted within a factor of 2 based on the kinetics measured in sediment-free microcosms. A threshold for dechlorination was not observed down to an aqueous concentration of about 1 ng/L PCB 61. We demonstrate that with the combination of an accurate measurement of the aqueous-phase dechlorination kinetics and an understanding of the site-specific partitioning characteristics, it is possible to predict PCB microbial dechlorination in sediments.

Distribution of polychlorinated biphenyls in effluent from a large municipal wastewater treatment plant: Potential for bioremediation?

This study involved an evaluation of the potential for bioremediation of polychlorinated biphenyls (PCBs) in the effluent from a large municipal wastewater treatment plant. It was focused on the presence of PCBs in two types of effluents: the continuous effluent present during dry weather conditions and the intermittently present effluent that was present during wet weather due to incoming stormwater. The annual discharge of PCBs for both types of effluent was calculated based on a five-year dataset (2011-2015). In addition, the toxicity and bioremediation potential of the PCBs in the effluent were also assessed. It was found that the continuous effluent was responsible for the majority of the discharged PCB into the receiving river (1821 g for five years), while the intermittent effluent contributed 260 g over the five years. The average number of chlorine per biphenyl for the detected PCB congeners showed a 19% difference between the two types of effluent, which indicated a potential for organohalide respiration of PCBs during the continuous treatment. This was further supported by a high level of tri-, tetra- and penta-chlorinated congeners accounting for 75% of the anaerobically respired PCBs. Potential for aerobic degradation and thus biomineralization of PCBs was identified for both effluents. Furthermore, toxicity of 12 dioxin-like PCBs showed that normal operation of the wastewater reduced the toxicity throughout the wastewater treatment plant.

Four decades since the ban, old urban wastewater treatment plant remains a dominant source of PCBs to the environment

Despite the ban on new manufacture and commercial use of PCBs, municipal sewer systems continue to serve as ongoing secondary sources for contamination in receiving water bodies. Ongoing PCB sources have made it difficult to achieve desired recovery after implementation of sediment cleanup efforts. We report on a 16-month surveillance to determine the inputs, fate, and export of PCBs within a municipal waste collection/treatment system by strategic sampling of the freely-dissolved and biosolids-associated PCBs. The total PCBs entering the treatment plant was found to be 170 g/day of which 100 g/day exited the plant associated with the biosolids and 5.2 g/day was discharged in the form of freely-dissolved PCBs in the effluent. A net loss of 68 g/day was calculated for the plant, attributable to volatilization and biodegradation. Freely dissolved PCBs in the treated effluent was an order of magnitude higher than the water quality criteria for the protection of human health through fish consumption and found to be a major contributor to the dissolved concentration in the receiving river. Predicted bioaccumulation in fish from dissolved PCBs in the effluent exceeded the threshold for human consumption. The biosolids, currently land-applied as fertilizer, contained an average PCB concentration of 760 μg/kg. The sludge produced in this treatment plant is processed in large anaerobic digesters and changes to the homolog distribution point to some microbial dechlorination. Application of biosolids to clean agricultural soil resulted in a 6-fold increase in PCB levels in the earthworm E. fetida which could be eliminated by the amendment of 1% by weight of activated carbon.

Positive Matrix Factorization analysis shows dechlorination of polychlorinated biphenyls during domestic wastewater collection and treatment

Polychlorinated biphenyls (PCBs) are persistent, toxic and bioaccumulative pollutants. One of the few pathways via which they break down is microbial dechlorination, which has been shown to occur in sewers. Questions remain about where within sewers this process takes place and which conditions encourage dechlorination. These issues were examined using a large data set on PCBs in influent and effluents from a main and bypass outfall from a wastewater treatment facility in the Mid-Atlantic region of the USA. A data set containing 64 chromatographic peaks representing 103 PCB congeners measured in 74 whole water samples was analyzed by Positive Matrix Factorization (PMF). PMF resolved four factors, three of which represented Aroclors 1242, 1254, and 1260. The remaining factor represented an advanced dechlorination regime of PCBs characterized by high proportions of PCBs 4 and 19 and comprised about 35% of the PCBs in the treated effluent, among the highest levels of dechlorination observed in previous studies. Concentrations of dechlorination products were not correlated with total suspended solids, indicating they were mostly dissolved and explaining the poor removal via sedimentation during the treatment process. The factors representing Aroclors were positively correlated with total influent flow, but the dechlorination signal was not, suggesting that the dechlorination signal arises from different locations and/or processes than the Aroclors. Even though treatment and dechlorination reduced the dioxin-like toxicity of the PCB mixture, this effect might be offset by the incomplete removal of dechlorination products.

Effects of Ferric Oxyhydroxide on Anaerobic Microbial Dechlorination of Polychlorinated Biphenyls in Hudson and Grasse River Sediment Microcosms: Dechlorination Extent, Preferences, Ortho Removal, and Its Enhancement

Microbial reductive dechlorination of polychlorinated biphenyls (PCBs) has been observed in many PCB-impacted sediments. However, this biodegradation is relatively site-specific and can be affected by PCB compositions and sediment geochemical conditions. To better understand the influence of a common competing electron acceptor, ferric oxyhydroxide (FeOOH), on dechlorination, two sediments (Hudson River and Grasse River sediments), and two PCB mixtures (PCB 5/12, 64/71, 105/114, and 149/153/170 in Mixture 1 and PCB 5/12, 64/71, 82/97/99, 144/170 in Mixture 2) were used for this microcosm study. The addition of 40 mmole/kg FeOOH completely inhibited PCB dechlorination in the Hudson sediment, but only moderately inhibited PCB dechlorination in the Grasse sediment with a 3-week longer lag time. The inhibitory effect in the Grasse sediment was mainly due to the loss of unflanked para dechlorination activity. Fe(II) analysis showed that dechlorination started prior to the consumption of Fe(III), which indicates PCB reduction and Fe(III) reduction were able to take place concurrently. Dehalococcoides 16S rRNA genes increased with the commencement of dechlorination in the Grasse sediment, but not in the completely inhibited Hudson sediment. Rare ortho dechlorination pathways were identified in FeOOH-amended Grasse sediment microcosms, dominated by transformations of PCB 25(24-3-CB) to PCB 13(3-4-CB) and PCB 28(24-4-CB) to PCB 15(4-4-CB). The addition of carbon sources (acetate or a fatty acid mixture with acetate, propionate, and butyrate) after 27 weeks of incubation reinitiated dechlorination in FeOOH-amended Hudson sediment microcosms. Also, the addition of carbon sources greatly enhanced ortho dechlorination in FeOOH-amended Grasse microcosms, indicating the utilization of acetate and/or the fatty acid mixture for ortho dechlorination-related microorganisms. A dechlorination pathway analysis approach revealed that para-flanked meta dechlorination was primarily preferred followed by ortho-/double-flanked meta dechlorination and single-/double-flanked para dechlorination in the Grasse sediment.

Enhanced biochars can match activated carbon performance in sediments with high native bioavailability and low final porewater PCB concentrations

A bench scale study was conducted to evaluate the effectiveness of in situ amendments to reduce the bioavailability of pollutants in sediments from a site impacted with polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs) and cadmium. The amendments tested included fine and coarse coal-based activated carbons (AC), an enhanced pinewood derived biochar (EPB), organoclay, and coke dosed at 5% of sediment dry weight. Strong reductions in total PCB porewater concentrations were observed in sediments amended with the fine AC (94.9-99.5%) and EPB (99.6-99.8%). More modest reductions were observed for the coarse AC, organoclay, and coke. Strong reductions in porewater PCB concentrations were reflected in reductions in total PCB bioaccumulation in fresh water oligochaetes for both the fine AC (91.9-96.0%) and EPB (96.1-96.3%). Total PAH porewater concentrations were also greatly reduced by the fine AC (>96.1%) and EPB (>97.8%) treatments. EPB matched or slightly outperformed the fine AC throughout the study, despite sorption data indicating a much stronger affinity of PCBs for the fine AC. Modeling EPB and fine AC effectiveness on other sediments confirmed the high effectiveness of the EPB was due to the very low final porewater concentrations and differences in the native bioavailability between sediments. However, low bulk density and poor settling characteristics make biochars difficult to apply in an aquatic setting. Neither the EPB nor the fine AC amendments were able to significantly reduce Cd bioavailability.

Reductive Debromination of Polybrominated Diphenyl Ethers - Microbes, Processes and Dehalogenases

Extensive utilization of polybrominated diphenyl ethers (PBDEs) as flame retardants since the 1960s in a variety of commercial products has resulted in ubiquitous environmental distribution of commercial PBDE mixtures. Dangers posed to biological populations became apparent after the discovery of elevated levels of PBDEs in biota, most notably in human breast milk and tissues. Environmental persistence of PBDEs results in significant transboundary displacement, threatening fragile ecosystems globally. Despite efforts to curtail usage of PBDEs, public concern remains about the effects of legacy PBDEs contamination and continued discharge of PBDEs in regions lacking restrictions on usage and manufacture. Among available technologies for remediation of PBDEs such as ex-situ soil washing, electrokinetic degradation, and biodegradation, this review focuses on bioremediation by microbes under anaerobic conditions. Bioremediation is generally preferred as it is less disruptive to contaminated ecosystems, is cost-effective, and can be implemented at sites that may be inaccessible to more traditional ex-situ methods. The aims of this review are to (1) summarize current knowledge of anaerobic microbes that debrominate PBDEs and their associated synergistic partnerships with non-dehalogenating microbes; (2) explore current understandings of the metabolic reductive debromination of PBDE congeners; (3) discuss recent discoveries on dehalogenase genes involved in debromination of PBDEs.

High-throughput sequencing revealed novel Dehalococcoidia in dechlorinating microbial enrichments from PCB-contaminated marine sediments

In this study, six PCE-to-ethene dechlorinating cultures, fed with a fermentable substrate (lactate) or hydrogen as electron donor, were obtained from PCB and PCE dechlorinating microcosms constructed with PCB-contaminated marine sediments. A novel Chloroflexi member (OTU-DIS1) affiliated to Dehalococcoidales Incertae Sedis, only distantly related to known dechlorinating bacteria, dominated the enrichment cultures (up to 86% of total OTUs). Sulfate-, thiosulfate- and sulfur-reducing bacteria affiliated to genera Desulfobacter, Dethiosulfatibacter and Desulfuromusa were also found to lesser extent. Remarkably, tceA, vcrA and the bifunctional PCE/PCB dehalogenase genes pcbA1, pcbA4 and pcbA5 were found in all dechlorinating microbial enrichments indicating the coexistence of different Dehalococcoides mccartyi strains. The reductive dechlorination rate in each culture remained unvaried over long-term operation (≈ 30 months) and ranged between 0.85 and 0.97 mmol Cl-1 released L-1 d-1 in the lactate-fed microbial enrichments and between 0.66 and 0.85 mmol Cl-1 released L-1 d-1 in the H2-fed microbial enrichments. Overall, this study highlights the presence of yet unexplored biodiversity in PCBs contaminated marine sediments and indicates these environments as promising sources of novel organohalide-respiring bacteria.

Accelerated removal of high concentration p-chloronitrobenzene using bioelectrocatalysis process and its microbial communities analysis

p-Chloronitrobenzene (p-CNB) is a persistent refractory and toxic pollutant with a concentration up to 200 mg/L in industrial wastewater. Here, a super-fast removal rate was found at 0.2-0.8 V of external voltage over a p-CNB concentration of 40-120 mg/L when a bioelectrochemical technology is used comparing to the natural biodegradation and electrochemical methods. The reduction kinetics (k) was fitted well according to pseudo-first order model with respect to the different initial concentration, indicating a 1.12-fold decrease from 1.80 to 0.85 h^-1 within the experimental range. Meanwhile, the highest k was provided at 0.5 V with the characteristic of energy saving. It was revealed that the functional bacterial (Propionimicrobium, Desulfovibrio, Halanaerobium, Desulfobacterales) was selectively enriched under electro-stimulation, which possibly processed Cl-substituted nitro-aromatics reduction. The possible degradation pathway was also proposed. This work provides the beneficial choice on the rapid treatment of high-concentration p-CNB wastewater.

A comparative evaluation of anaerobic dechlorination of PCB-118 and Aroclor 1254 in sediment microcosms from three PCB-impacted environments

Aroclor 1254 (A1254) is the most toxic commercial PCB mixture produced, primarily due to its relatively high concentrations of dioxin-like congeners. This study demonstrates a comparative evaluation of dechlorination of A1254 and PCB-118 by indigenous organohalide respiring bacteria enriched from three PCB impacted sites: Grasse River (GR), NY; Fox River (FR), WI; and Baltimore Harbor (BH), MD. PCB-118 dechlorination rates in GR, BH, and FR was 0.0308, 0.015, and 0.0006 Cl^-/biphenyl/day, respectively. A1254 dechlorination rates in GR, FR, and BH were 0.0153, 0.0144, and 0.0048 Cl^-/biphenyl/day, respectively. A1254 dechlorination was achieved through the removal of doubly-/singly-flanked chlorines in meta and para positions of mostly penta- followed by hexa- and hepta-chlorinated congeners by 88%, 69%, and 51% in GR, and 88%, 87%, and 83% in FR, respectively, while in BH mostly hepta- (70%) followed by hexa-chlorinated congeners (66%) were dechlorinated. A previously developed Anaerobic Dechlorination Model (ADM) quantified a total of 17 toxicity-related dechlorination pathways in all three sediment microcosms. The toxic equivalency of A1254 based on seven dioxin-like congeners decreased by about 53%, 45% and 21%, in GR, FR and BH microcosms, respectively. The dechlorination products were generally tetra- and tri-chlorinated congeners with unflanked chlorines, all of which is susceptible to further degradation by aerobic bacteria. Concerning the toxic congeners, ADM can be useful to initiate further research focusing on the stimulation of the toxicity reducing pathways for risk assessment and effective remediation strategies.

Mesocosm Studies on the Efficacy of Bioamended Activated Carbon for Treating PCB-Impacted Sediment

This report describes results of a bench-scale treatability study to evaluate the efficacy of bioaugmentation with bioamended activated carbon (AC) for in situ treatment of polychlorinated biphenyl (PCB) impacted sediments. To this end, the ability of PCB transforming microorganisms to degrade and reduce the overall concentration of PCBs in sediment was determined in 2 L recirculating mesocosms designed to simulate conditions in Abraham's Creek in Quantico, Virginia. Ten sediment mesocosms were tested for the effects of AC alone, AC with slow release electron donor (cellulose) and different concentrations and combinations of PCB dehalogenating and degrading microorganisms added as bioamendments. A 78% reduction of total PCBs was observed using a cell titer of 5 × 10⁵ Dehalobium chlorocoercia and Paraburkholderia xenovorans cells g^-1 sediment with 1.5% AC as a delivery system. Levels of both higher and lower chlorinated congeners were reduced throughout the sediment column indicating that both anaerobic reductive dechlorination and aerobic degradation occurred concurrently. Porewater concentrations of all PCB homologues were reduced 94-97% for bioaugmented treatments. Toxicity associated with coplanar PCBs was reduced by 90% after treatment based on toxic equivalency of dioxin-like congeners. These results suggest that an in situ treatment employing the simultaneous application of anaerobic and aerobic microorganisms on AC could be an effective, environmentally sustainable strategy to reduce PCB levels in contaminated sediment.

Identification of two organohalide-respiring Dehalococcoidia associated to different dechlorination activities in PCB-impacted marine sediments

Background

Microbial reductive dechlorination of polychlorinated biphenyls (PCBs) plays a major role in detoxifying anoxic contaminated freshwater and marine sediments from PCBs. Known members of the phylum Chloroflexi are typically responsible for this activity in freshwater sediments, whereas less is known about the microorganisms responsible for this activity in marine sediments. PCB-respiring activities were detected in PCB-impacted marine sediments of the Venice Lagoon. The aim of this work was to identify the indigenous organohalide-respiring microorganisms in such environments and assess their dechlorination specificity against spiked Aroclor™ 1254 PCBs under laboratory conditions resembling the in situ biogeochemistry.

Results

High PCB dechlorination activities (from 150 ± 7 to 380 ± 44 μmol of chlorine removed kg⁻¹ week⁻¹) were detected in three out of six sediments sampled from different locations of the lagoon. An uncultured non-Dehalococcoides phylotype of the class Dehalococcoidia closely related to Dehalobium chlorocoercia DF-1, namely phylotype VLD-1, was detected and enriched up to 10⁹ 16S rRNA gene copies per gram of sediment where dechlorination activities were higher and 25-4/24-4 and 25-2/24-2/4-4 chlorobiphenyls (CB) accumulated as the main tri-/dichlorinated products. Conversely, a different phylotype closely related to the SF1/m-1 clade, namely VLD-2, also enriched highly where lower dechlorination activity and the accumulation of 25-3 CB as main tri-chlorinated product occurred, albeit in the simultaneous presence of VLD-1. Both phylotypes showed growth yields higher or comparable to known organohalide respirers and neither phylotypes enriched in sediment cultures not exhibiting dechlorination.

Conclusions

These findings confirm the presence of different PCB-respiring microorganisms in the indigenous microbial communities of Venice Lagoon sediments and relate two non-Dehalococcoides phylotypes of the class Dehalococcoidia to different PCB dechlorination rates and specificities.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-017-0743-4) contains supplementary material, which is available to authorized users.

Estimation of rate constants of PCB dechlorination reactions using an anaerobic dehalogenation model

This study aims to estimate anaerobic dechlorination rate constants (k_m) of reactions of individual PCB congeners using data from four laboratory microcosms set up using sediment from Baltimore Harbor. Pathway k_m values are estimated by modifying a previously developed model as Anaerobic Dehalogenation Model (ADM) which can be applied to any halogenated hydrophobic organic (HOC). Improvements such as handling multiple dechlorination activities (DAs) and co-elution of congeners, incorporating constraints, using new goodness of fit evaluation led to an increase in accuracy, speed and flexibility of ADM. DAs published in the literature in terms of chlorine substitutions as well as specific microorganisms and their combinations are used for identification of pathways. The best fit explaining the congener pattern changes was found for pathways of Phylotype DEH10, which has the ability to remove doubly flanked chlorines in meta and para positions, para flanked chlorines in meta position. The range of estimated k_m values is between 0.0001-0.133d^-1, the median of which is found to be comparable to the few available published biologically confirmed rate constants. Compound specific modelling studies such as that performed by ADM can enable monitoring and prediction of concentration changes as well as toxicity during bioremediation.

Potential risk reduction of Aroclor 1254 by microbial dechlorination in anaerobic Grasse River sediment microcosms

Aroclor 1254 was the second most produced commercial PCB mixture and is found in soils, sediments and sewage throughout the globe. This commercial PCB mixture is considered particularly toxic because of the relatively high concentrations of congeners with dioxin-like properties. The potential for risk reduction by microbial reductive dechlorination of Aroclor 1254 (A1254) was investigated in sediment microcosms from Grasse River (GR), Massena, NY. The specificity of A1254 dechlorination was doubly- and singly-flanked chlorines in meta positions and to a less extent doubly-flanked para chlorines of 2345-substituted chlorobiphenyl rings. The average dechlorination rate of A1254 was 0.0153 Cl^-/biphenyl/day, and dechlorination rates of single congeners ranged between 0.001 and 0.0074 Cl^-/biphenyl/day. Potential risk associated with A1254 based on the toxic equivalency factors of the dioxin-like congeners was reduced by 83%. Additional potential risk associated with bioaccumulation in fish was reduced by 35% based on biota-sediment accumulation factor estimates for all detected congeners. Finally, the dechlorination end-products were tri- and tetra-chlorobiphenyls with unflanked chlorines, all of which are susceptible to further degradation by aerobic microorganisms. The combined results indicate that microbial reductive dechlorination has the potential for reducing risk associated with toxicity and bioaccumulation in fish in sites contaminated with A1254.

Microbial-Catalyzed Reductive Dechlorination of Polychlorinated Biphenyls in Hudson and Grasse River Sediment Microcosms: Determination of Dechlorination Preferences and Identification of Rare Ortho Removal Pathways

Biodegradation of polychlorinated biphenyls (PCBs) is an important transformation and detoxification route in the environment. To better understand the influence of PCB congener compositions on dechlorination, sediments from two rivers, Hudson and Grasse, and two PCB mixtures (PCB 5/12, 64/71, 105/114, and 149/153/170 in Mixture 1 and PCB 5/12, 64/71, 82/97/99, and 144/170 in Mixture 2) were used for this microcosm study. The Grasse River sediment microcosms exhibited more extensive dechlorination than the Hudson River sediment microcosms. The extent of dechlorination was predominantly controlled by sediment itself, not by the PCB compositions. Rare ortho dechlorination, targeting mono-ortho PCB congeners was observed in Grasse sediment, indicating a potential for full dechlorination of some PCBs in this sediment. The identified ortho dechlorination pathways were PCB 28 (24-4-CB) to PCB 15 (4-4-CB) and PCB 25 (24-3-CB) to PCB 13(3-4-CB). The relative abundances of Dehalococcoides were much higher in both sediments spiked with PCBs. An apparent increase of Dehalococcoides 16S rRNA genes coincided with the commencement of dechlorination. The dechlorination preferences were identified using a modified data analysis approach focusing on chlorine neighboring conditions. In both sediments, the overall dechlorination preferred meta > para > ortho. Specially, ortho-/double-flanked meta-chlorines were primarily targeted followed by single-/double-flanked para-chlorines.

First evidence on the occurrence and dynamics of Dehalococcoides mccartyi PCB-dechlorinase genes in marine sediment during Aroclor1254 reductive dechlorination

The present study evaluates the PCB-dehalorespiring capabilities and dynamics of indigenous Dehalococcoides mccartyi population in a PCB contaminated marine sediment. Specialized PCB-dechlorinase genes pcbA1, pcbA4 and pcbA5 previously characterized in pure cultures of D. mccartyi, were here found for the first time in environmental samples. Reductive dechlorination was stimulated by spiking Aroclor1254 to the sediment and by imposing strictly anaerobic conditions both with and without bioaugmentation with a Dehalococcoides mccartyi enrichment culture. In line with the contaminant dechlorination kinetics, Dehalococcoides population increased during the entire incubation period showing growth yields of 4.94E+07 Dehalococcoides per μmolCl^-1 and 7.30E+05 Dehalococcoides per μmolCl^-1 in the marine sediment with and without bioaugmentation respectively. The pcbA4 and pcbA5 dechlorinase genes, and to a lesser extent pcbA1 gene, were enriched during the anaerobic incubation suggesting their role in Aroclor1254 dechlorination under salinity conditions.

Polychlorinated biphenyl (PCB) anaerobic degradation in marine sediments: microcosm study and role of autochthonous microbial communities

Polychlorobiphenyl (PCB) biodegradation was followed for 1 year in microcosms containing marine sediments collected from Mar Piccolo (Taranto, Italy) chronically contaminated by this class of hazardous compounds. The microcosms were performed under strictly anaerobic conditions with or without the addition of Dehalococcoides mccartyi, the main microorganism known to degrade PCBs through the anaerobic reductive dechlorination process. Thirty PCB congeners were monitored during the experiments revealing that the biodegradation occurred in all microcosms with a decrease in hepta-, hexa-, and penta-chlorobiphenyls (CBs) and a parallel increase in low chlorinated PCBs (tri-CBs and tetra-CBs). The concentrations of the most representative congeners detected in the original sediment, such as 245-245-CB and 2345-245-CB, and of the mixture 2356-34-CB+234-245-CB, decreased by 32.5, 23.8, and 46.7 %, respectively, after only 70 days of anaerobic incubation without any bioaugmentation treatment. Additionally, the structure and population dynamics of the microbial key players involved in the biodegradative process and of the entire mixed microbial community were accurately defined by Catalyzed Reporter Deposition Fluorescence In Situ Hybridization (CARD-FISH) in both the original sediment and during the operation of the microcosm. The reductive dehalogenase genes of D. mccartyi, specifically involved in PCB dechlorination, were also quantified using real-time PCR (qPCR). Our results demonstrated that the autochthonous microbial community living in the marine sediment, including D. mccartyi (6.32E+06 16S rRNA gene copy numbers g(-1) sediment), was able to efficiently sustain the biodegradation of PCBs when controlled anaerobic conditions were imposed.

Indirect Evidence Link PCB Dehalogenation with Geobacteraceae in Anaerobic Sediment-Free Microcosms

Although polychlorinated biphenyls (PCBs) production was brought to a halt 30 years ago, recalcitrance to degradation makes them a major environmental pollutant at a global scale. Previous studies confirmed that organohalide-respiring bacteria (OHRB) were capable of utilizing chlorinated congeners as electron acceptor. OHRB belonging to the Phyla Chloroflexi and Firmicutes are nowadays considered as the main PCB-dechlorinating organisms. In this study, we aimed at exploring the involvement of other taxa in PCB dechlorination using sediment-free microcosms (SFMs) and the Delor PCB mixture. High rates of congener dehalogenation (up to 96%) were attained in long-term incubations of up to 692 days. Bacterial communities were dominated by Chloroflexi, Proteobacteria, and Firmicutes, among strictly simplified community structures composed of 12 major phyla only. In a first batch of SFMs, Dehalococcoides mccartyi closely affiliated with strains CG4 and CBDB1 was considered as the main actor associated with congener dehalogenation. Addition of 2-bromoethanesulfonate (BES), a known inhibitor of methanogenic activity in a second batch of SFMs had an adverse effect on the abundance of Dehalococcoides sp. Only two sequences affiliated to this Genus could be detected in two (out of six) BES-treated SFMs, contributing to a mere 0.04% of the communities. BES-treated SFMs showed very different community structures, especially in the contributions of organisms involved in fermentation and syntrophic activities. Indirect evidence provided by both statistical and phylogenetic analysis validated the implication of a new cluster of actors, distantly affiliated with the Family Geobacteraceae (Phylum δ-Proteobacteria), in the dehalogenation of low chlorinated PCB congeners. Members of this Family are known already for their dehalogenation capacity of chlorinated solvents. As a result, the present study widens the knowledge for the phylogenetic reservoir of indigenous PCB dechlorinating taxa.

Reductive dechlorination of tetrachloroethene in marine sediments: Biodiversity and dehalorespiring capabilities of the indigenous microbes

Chlorinated compounds pose environmental concerns due to their toxicity and wide distribution in several matrices. Microorganisms specialized in leading anaerobic reductive dechlorination (RD) processes, including Dehalococcoides mccartyi (Dhc), are able to reduce chlorinated compounds to harmless products or to less toxic forms. Here we report the first detailed study dealing with the RD potential of heavy polluted marine sediment by evaluating the biodegradation kinetics together with the composition, dynamics and activity of indigenous microbial population. A microcosm study was conducted under strictly anaerobic conditions on marine sediment collected near the marine coast of Sarno river mouth, one of the most polluted river in Europe. Tetrachloroethene (PCE), used as model pollutant, was completely converted to ethene within 150 days at reductive dechlorination rate equal to 0.016 meq L(-1) d(-1). Consecutive spikes of PCE allowed increasing the degradation kinetics up to 0.1 meq L(-1)d(-1) within 20 days. Strictly anaerobiosis and repeated spikes of PCE stimulated the growth of indigenous Dhc cells (growth yield of ~7.0 E + 07 Dhc cells per μM Cl(-1) released). Dhc strains carrying the reductive dehalogenase genes tceA and vcrA were detected in the original marine sediment and their number increased during the treatment as demonstrated by the high level of tceA expression at the end of the microcosm study (2.41 E + 05 tceA gene transcripts g(-1)). Notably, the structure of the microbial communities was fully described by Catalysed Reporter Deposition Fluorescence In Situ Hybridization (CARD-FISH) as wells as the dynamics of the dechlorinating bacteria during the microcosms operation. Interestingly, a direct role of Dhc cells was ascertained suggesting the existence of strains adapted at salinity conditions. Additionally, non-Dhc Chloroflexi were retrieved in the original sediment and were kept stable over time suggesting their likely flanking role of the RD process.

Evaluation of PCB dechlorination pathways in anaerobic sediment microcosms using an anaerobic dechlorination model

A detailed quantitative analysis of anaerobic dechlorination (AD) pathways of polychlorinated biphenyls (PCBs) in sediment microcosms was performed by applying an anaerobic dechlorination model (ADM). The purpose of ADM is to systematically analyze changes in a contaminant profile that result from microbial reductive dechlorination according to empirically determined dechlorination pathways. In contrast to prior studies that utilized modeling tools to predict dechlorination pathways, ADM also provides quantification of individual pathways. As only microbial reductive dechlorination of PCBs occurred in the modeled laboratory microcosms, extensive analysis of AD pathways was possible without the complicating effect of concurrent physico-chemical or other weathering mechanisms. The results from this study showed: (1) ninety three AD pathways are active; (2) tetra- to hepta-chlorobiphenyl (CB) congeners were common intermediates in several AD pathways, penta-CBs being the most frequently observed; (3) the highest rates of dechlorination were for penta-CB homologs during the initial 185 days; (4) the dominant terminal products of AD were PCB 32(26-4), 49(24-25), 51(24-26), 52(25-25), 72(25-35), 73(26-35) and 100(246-24), (5) potential toxicity of the sediment was reduced. ADM serves as a powerful tool not only for a thorough analysis of AD pathways, but also for providing necessary input for numerical fate models (as a degradation term) that investigate dechlorination products or outcome of natural attenuation, or bioremediation/bioaugmentation of PCB-impacted sediments.

Patterns of benthic bacterial diversity in coastal areas contaminated by heavy metals, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)

Prokaryotes in coastal sediments are fundamental players in the ecosystem functioning and regulate processes relevant in the global biogeochemical cycles. Nevertheless, knowledge on benthic microbial diversity patterns across spatial scales, or as function to anthropogenic influence, is still limited. We investigated the microbial diversity in two of the most chemically polluted sites along the coast of Italy. One site is the Po River Prodelta (Northern Adriatic Sea), which receives contaminant discharge from one of the largest rivers in Europe. The other site, the Mar Piccolo of Taranto (Ionian Sea), is a chronically polluted area due to steel production plants, oil refineries, and intense maritime traffic. We collected sediments from 30 stations along gradients of contamination, and studied prokaryotic diversity using Illumina sequencing of amplicons of a 16S rDNA gene fragment. The main sediment variables and the concentration of eleven metals, polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) were measured. Chemical analyses confirmed the high contamination in both sites, with concentrations of PCBs particularly high and often exceeding the sediment guidelines. The analysis of more than 3 millions 16S rDNA sequences showed that richness decreased with higher contamination levels. Multivariate analyses showed that contaminants significantly shaped community composition. Assemblages differed significantly between the two sites, but showed wide within-site variations related with spatial gradients in the chemical contamination, and the presence of a core set of OTUs shared by the two geographically distant sites. A larger importance of PCB-degrading taxa was observed in the Mar Piccolo, suggesting their potential selection in this historically polluted site. Our results indicate that sediment contamination by multiple contaminants significantly alter benthic prokaryotic diversity in coastal areas, and suggests considering the potential contribution of the resident microbes to contaminant bioremediation actions.

Divergent PCB organohalide-respiring consortia enriched from the efflux channel of a former Delor manufacturer in Eastern Europe

Polychlorinated biphenyl (PCB) organohalide-respiring communities from the efflux channel of a former Delor manufacturer in Eastern Slovakia were assessed using metagenomic, statistical and cultivation-adapted approaches. Multivariate analysis of environmental factors together with terminal restriction fragment length polymorphisms of the bacterial communities in the primary sediments revealed both temporal and spatial heterogeneity in the distribution of microbial populations, which reflects the dynamic pattern of contamination and altered conditions for biodegradation activity along the channel. Anaerobic microcosms were developed from eight sediments sampled along the channel, where high concentrations of PCBs - from 6.6 to 136mg/kg dry weight, were measured. PCB dehalorespiring activity, congruent with changes in the microbial composition in all microcosms, was detected. After 10 months of cultivation, the divergently evolved consortia achieved up to 35.9 percent reduction of the total PCB concentration. Phylogenetic-analysis of the active Chloroflexi-related organohalide-respiring bacteria by partial sequencing of 16S rRNA genes in cDNA from microcosms with the highest PCB dechlorination activity revealed diverse and unique complexity of the populations. The predominant organohalide respirers were either affiliated with Dehalococcoides sp. and Dehalococcoides-like group (DLG) organisms or were composed of currently unknown distant clades of DLG bacteria. The present study should encourage researchers to explore the full potential of the indigenous PCB dechlorinating populations to develop effective bioremediation approaches that can perform the complete mineralization of PCBs in polluted environments.

Microbial community analysis of switchgrass planted and unplanted soil microcosms displaying PCB dechlorination

Polychlorinated biphenyls (PCBs) pose potential risks to human and environmental health because they are carcinogenic, persistent, and bioaccumulative. In this study, we investigated bacterial communities in soil microcosms spiked with PCB 52, 77, and 153. Switchgrass (Panicum virgatum) was employed to improve overall PCB removal, and redox cycling (i.e., sequential periods of flooding followed by periods of no flooding) was performed in an effort to promote PCB dechlorination. Lesser chlorinated PCB transformation products were detected in all microcosms, indicating the occurrence of PCB dechlorination. Terminal restriction fragment length polymorphism (T-RFLP) and clone library analysis showed that PCB spiking, switchgrass planting, and redox cycling affected the microbial community structure. Putative organohalide-respiring Chloroflexi populations, which were not found in unflooded microcosms, were enriched after 2 weeks of flooding in the redox-cycled microcosms. Sequences classified as Geobacter sp. were detected in all microcosms and were most abundant in the switchgrass-planted microcosm spiked with PCB congeners. The presence of possible organohalide-respiring bacteria in these soil microcosms suggests that they play a role in PCB dechlorination therein.

Enhanced Polychlorinated Biphenyl Removal in a Switchgrass Rhizosphere by Bioaugmentation with Burkholderia xenovorans LB400

Phytoremediation makes use of plants and associated microorganisms to clean up soils and sediments contaminated with inorganic and organic pollutants. In this study, switchgrass (Panicum virgatum) was used to test for its efficiency in improving the removal of three specific polychlorinated biphenyl (PCB) congeners (PCB 52, 77 and 153) in soil microcosms. The congeners were chosen for their ubiquity, toxicity, and recalcitrance. After 24 weeks of incubation, loss of 39.9 ± 0.41% of total PCB molar mass was observed in switchgrass treated soil, significantly higher than in unplanted soil (29.5 ± 3.4%) (p<0.05). The improved PCB removal in switchgrass treated soils could be explained by phytoextraction processes and enhanced microbial activity in the rhizosphere. Bioaugmentation with Burkholderia xenovorans LB400 was performed to further enhance aerobic PCB degradation. The presence of LB400 was associated with improved degradation of PCB 52, but not PCB 77 or PCB 153. Increased abundances of bphA (a functional gene that codes for a subunit of PCB-degrading biphenyl dioxygenase in bacteria) and its transcript were observed after bioaugmentation. The highest total PCB removal was observed in switchgrass treated soil with LB400 bioaugmentation (47.3 ± 1.22 %), and the presence of switchgrass facilitated LB400 survival in the soil. Overall, our results suggest the combined use of phytoremediation and bioaugmentation could be an efficient and sustainable strategy to eliminate recalcitrant PCB congeners and remediate PCB-contaminated soil.