Bacterial degradation of perfluoroalkyl acids

Advances in biological degradation of per- and polyfluoroalkyl substances (PFAS) have shown that bioremediation is a promising method of PFAS mineralization; however, most of these studies focus on remediation of more reactive polyfluorinated compounds. This review focuses on the defluorination of the more recalcitrant perfluorinated alkyl acids (PFAAs) by bacteria. We highlight key studies that report PFAA degradation products, specific bacteria, and relevant genes. Among these studies, we discuss trends in anaerobic versus aerobic conditions with specific bacterial species or consortia. This holistic review seeks to elucidate the state of PFAA biodegradation research and discuss the need for future research for environmental application.

Per- and polyfluoroalkyl substances (PFAS) as contaminants in groundwater resources - A comprehensive review of subsurface transport processes

Per- and polyfluorinated alkyl substances (PFAS) are persistent contaminants in the environment. An increased awareness of adverse health effects related to PFAS has further led to stricter regulations for several of these substances in e.g. drinking water in many countries. Groundwater constitutes an important source of raw water for drinking water production. A thorough understanding of PFAS subsurface fate and transport mechanisms leading to contamination of groundwater resources is therefore essential for management of raw water resources. A review of scientific literature on the subject of processes affecting subsurface PFAS fate and transport was carried out. This article compiles the current knowledge of such processes, mainly focusing on perfluoroalkyl acids (PFAA), in soil- and groundwater systems. Further, a compilation of data on transport parameters such as solubility and distribution coefficients, as well as, insight gained and conclusions drawn from the reviewed material are presented. As the use of certain fire-fighting foams has been identified as the major source of groundwater contamination in many countries, research related to this type of pollution source has been given extra focus. Uptake of PFAS in biota is outside the scope of this review. The review showed a large spread in the magnitude of distribution coefficients and solubility for individual PFAS. Also, it is clear that the influence of multiple factors makes site-specific evaluation of distribution coefficients valuable. This article aims at giving the reader a comprehensive overview of the subject, and providing a base for further work.

Per- and polyfluoroalkyl substances removal from landfill leachate by a planting unit via interactions between foamed glass and Typha domingensis

Sustainable removal of per- and polyfluoroalkyl substances (PFAS) from landfill leachate remains a pressing global challenge. To develop an effective PFAS removal technology that utilizes nature-based solutions, we considered a planting unit comprised of a microbial carrier (foamed glass) and Typha domingensis. This study evaluated the possibility of removing PFAS from landfill leachate using a planting unit through a pot experiment. The planting unit effectively removed various short- and long-chain PFAS from the landfill leachate, including perfluorocarboxylic acids (PFCAs [C4-C10]), perfluorosulfonic acids (PFSAs [C4, C6, and C8]), fluorotelomer carboxylic acids (FTCAs [5:3 and 7:3]), and 6:2 fluorotelomer sulfonic acid (FTS), with initial concentrations of 43-9100 ng L-1, achieving a removal efficiency of 53-83% in 21 d. Mass balance analysis indicated that the contribution of accumulation on foamed glass and plant adsorption and uptake played no major role in the removal of PFCAs (C4-C9), PFSAs (C4), and FTCAs (5:3 and 7:3), and that other removal processes played a key role. Although not the most effective removal process, the contribution of accumulation on foamed glass tended to be more notable in the removal of longer-chain PFCAs. In addition, plant adsorption and uptake showed that longer-chain PFCAs were more likely to remain in roots, whereas shorter-chain PFCAs were more likely to be transferred to aboveground plant part. On the other hand, 6:2 FTS removal occurred primarily due to accumulation on foamed glass. These results suggest that differences in the physicochemical properties of PFAS affect removal mechanisms. This study provides valuable insights into development of environmentally friendly technologies capable of removing a variety of short- and long-chain PFAS.

Occurrence and fate of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in an urban aquifer located at the Besòs River Delta (Spain)

Urban aquifers are at risk of contamination from persistent and mobile organic compounds (PMOCs), especially per- and polyfluoroalkyl substances (PFAS), which are artificial organic substances widely used across various industrial sectors. PFAS are considered toxic, mobile and persistent, and have therefore gained significant attention in environmental chemistry. Moreover, precursors could transform into more recalcitrant products under natural conditions. However, there is limited information about the processes which affect their behaviour in groundwater at the field-scale. In this context, the aim of this study is to assess the presence of PFAS in an urban aquifer in Barcelona, and identify processes that control their evolution along the groundwater flow. 21 groundwater and 6 river samples were collected revealing the presence of 16 PFAS products and 3 novel PFAS. Short and ultra-short chain PFAS were found to be ubiquitous, with the highest concentrations detected for perfluorobutanesulfonic acid (PFBS), trifluoroacetic acid (TFA) and trifluoromethanesulfonic acid (TFSA). Long chain PFAS and novel PFAS were found to be present in very low concentrations (<50 ng/L). It was observed that redox conditions influence the behaviour of a number of PFAS controlling their attenuation or recalcitrant behaviour. Most substances showed accumulation, possibly explained by sorption/desorption processes or transformation processes, highlighting the challenges associated with PFAS remediation. In addition, the removal processes of different intensities for three PFAS were revealed. Our results help to establish the principles of the evolution of PFAS along the groundwater flow, which are important for the development of conceptual models used to plan and adopt site specific groundwater management activities (e.g., Managed Aquifer Recharge).

Regeneration of exhausted adsorbents after PFAS adsorption: A critical review

The adsorption process efficiently removes per- and polyfluoroalkyl substances (PFAS) from water, but managing exhausted adsorbents presents notable environmental and economic challenges. Conventional disposal methods, such as incineration, may reintroduce PFAS into the environment. Therefore, advanced regeneration techniques are imperative to prevent leaching during disposal and enhance sustainability and cost-effectiveness. This review critically evaluates thermal and chemical regeneration approaches for PFAS-laden adsorbents, elucidating their operational mechanisms, the influence of water quality parameters, and their inherent advantages and limitations. Thermal regeneration achieves notable desorption efficiencies, reaching up to 99% for activated carbon. However, it requires significant energy input and risks compromising the adsorbent's structural integrity, resulting in considerable mass loss (10-20%). In contrast, chemical regeneration presents a diverse efficiency landscape across different regenerants, including water, acidic/basic, salt, solvent, and multi-component solutions. Multi-component solutions demonstrate superior efficiency (>90%) compared to solvent-based solutions (12.50%), which, in turn, outperform salt (2.34%), acidic/basic (1.17%), and water (0.40%) regenerants. This hierarchical effectiveness underscores the nuanced nature of chemical regeneration, significantly influenced by factors such as regenerant composition, the molecular structure of PFAS, and the presence of organic co-contaminants. Exploring the conditional efficacy of thermal and chemical regeneration methods underscores the imperative of strategic selection based on specific types of PFAS and material properties. By emphasizing the limitations and potential of particular regeneration schemes and advocating for future research directions, such as exploring persulfate activation treatments, this review aims to catalyze the development of more effective regeneration processes. The ultimate goal is to ensure water quality and public health protection through environmentally sound solutions for PFAS remediation efforts.

Distribution characteristics and transformation mechanism of per- and polyfluoroalkyl substances in drinking water sources: A review

Per- and polyfluoroalkyl substances (PFASs) have raised significant concerns within the realm of drinking water due to their widespread presence in various water sources. This prevalence poses potential risks to human health, ecosystems, and the safety of drinking water. However, there is currently a lack of comprehensive reviews that systematically categorize the distribution characteristics and transformation mechanisms of PFASs in drinking water sources. This review aims to address this gap by concentrating on the specific sources of PFASs contamination in Chinese drinking water supplies. It seeks to elucidate the migration and transformation processes of PFASs within each source, summarize the distribution patterns of PFASs in surface and subsurface drinking water sources, and analyze how PFASs molecular structure, solubility, and sediment physicochemical parameters influence their presence in both the water phase and sediment. Furthermore, this review assesses two natural pathways for PFASs degradation, namely photolysis and biodegradation. It places particular emphasis on understanding the degradation mechanisms and the factors that affect the breakdown of PFASs by microorganisms. The ultimate goal is to provide valuable insights for the prevention and control of PFAS contamination and the assurance of drinking water quality.

Occurrence, fate, and remediation for per-and polyfluoroalkyl substances (PFAS) in sewage sludge: A comprehensive review

Addressing per-and polyfluoroalkyl substances (PFAS) contamination is an urgent environmental concern. While most research has focused on PFAS contamination in water matrices, comparatively little attention has been given to sludge, a significant by-product of wastewater treatment. This critical review presents the latest information on emission sources, global distribution, international regulations, analytical methods, and remediation technologies for PFAS in sludge and biosolids from wastewater treatment plants. PFAS concentrations in sludge matrices are typically in hundreds of ng/g dry weight (dw) in developed countries but are rarely reported in developing and least-developed countries due to the limited analytical capability. In comparison to water samples, efficient extraction and cleaning procedures are crucial for PFAS detection in sludge samples. While regulations on PFAS have mainly focused on soil due to biosolids reuse, only two countries have set limits on PFAS in sludge or biosolids with a maximum of 100 ng/g dw for major PFAS. Biological technologies using microbes and enzymes present in sludge are considered as having high potential for PFAS remediation, as they are eco-friendly, low-cost, and promising. By contrast, physical/chemical methods are either energy-intensive or linked to further challenges with PFAS contamination and disposal. The findings of this review deepen our comprehension of PFAS in sludge and have guided future research recommendations.

Emergence of per- and poly-fluoroalkyl substances (PFAS) and advances in the remediation strategies

A group of fluorinated organic molecules known as per- and poly-fluoroalkyl substances (PFAS) have been commonly produced and circulated in the environment. PFAS, owing to multiple strong CF bonds, exhibit exceptional stability and possess a high level of resistance against biological or chemical degradation. Recently, PFAS have been identified to cause numerous hazardous effects on the biotic ecosystem. As a result, extensive efforts have been made in recent years to develop effective methods to remove PFAS. Adsorption, filtration, heat treatment, chemical oxidation/reduction, and soil washing are a few of the physicochemical techniques that have shown their ability to remove PFAS from contaminated matrixes. However these methods also carry significant drawbacks, including the fact that they are expensive, energy-intensive, unsuitable for in-situ treatment, and requirement to be carried under dormant conditions. The metabolic products released upon PFAS degradation are largely unknown, despite the fact that thermal disintegration methods are widely used. In contrast to physical and chemical methods, biological degradation of PFAS has been regarded as efficient method. However, PFAS are difficult to instantly and completely metabolize through biological methods due to the limitations of biocatalytic mechanisms. Nevertheless, cost, easy-to-operate and environmentally safe are some of the advantages over its counterpart. The present review comprehensively discusses the occurrence of PFAS, the state-of-the science of remediation technologies and approaches applied, and the remediation challenges. The article also focuses on the future research directions toward the development of effective methods for PFAS-contaminated site in-situ treatment.

Unveiling nano-empowered catalytic mechanisms for PFAS sensing, removal and destruction in water

Per- and polyfluoroalkyl substances (PFAS) are organofluorine compounds used to manufacture various industrial and consumer goods. Due to their excellent physical and thermal stability ascribed to the strong CF bond, these are ubiquitously present globally and difficult to remediate. Extensive toxicological and epidemiological studies have confirmed these substances to cause adverse health effects. With the increasing literature on the environmental impact of PFAS, the regulations and research have also expanded. Researchers worldwide are working on the detection and remediation of PFAS. Many methods have been developed for their sensing, removal, and destruction. Amongst these methods, nanotechnology has emerged as a sustainable and affordable solution due to its tunable surface properties, high sorption capacities, and excellent reactivities. This review comprehensively discusses the recently developed nanoengineered materials used for detecting, sequestering, and destroying PFAS from aqueous matrices. Innovative designs of nanocomposites and their efficiency for the sensing, removal, and degradation of these persistent pollutants are reviewed, and key insights are analyzed. The mechanistic details and evidence available to support the cleavage of the CF bond during the treatment of PFAS in water are critically examined. Moreover, it highlights the challenges during PFAS quantification and analysis, including the analysis of intermediates in transitioning nanotechnologies from the laboratory to the field.

Effects of perfluorooctanoic acid and perfluorooctane sulfonic acid on microbial community structure during anaerobic digestion

Per- and polyfluoroalkyl substances (PFASs) are recalcitrant organic pollutants, which accumulate widely in aquatic and solid matrices. Anaerobic digestion (AD) is one of possible options to manage organic wastes containing PFASs, however, the impacts of different types of PFAS on AD remains unclear. This study aimed to critically investigate the effects of two representative PFAS compounds, i.e., perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), on the AD performance and microbial community structure. 100 mg/L of both PFOA and PFOS considerably inhibited the AD performance and changed the microbial community structure. Especially, PFOA was more toxic to bacterial and archaeal activity than PFOS, which was reflected in AD performance. In addition, the sulfonic acid group in PFOS affected the changes in microbial community structure by inducing abundant sulfate reducing bacteria (i.e., Desulfobacterota). This study provides a significant reference to the response of AD system on different PFAS types and dosage.

Draft genome sequence of perfluorinated acids C7-C9 degrading bacterium Pseudomonas mosselii 5(3), isolated from soil contaminated with pesticides

The Pseudomonas mosselii 5(3) strain is a potential degrader of persistent perfluorinated pollutants, particularly C7-C9 perfluorinated acids. The genome of the strain has been fully sequenced. It consists of a chromosome with a length of 5,676,241 base pairs and a G-C content of 64.38%.

Mechanisms and Opportunities for Rational In Silico Design of Enzymes to Degrade Per- and Polyfluoroalkyl Substances (PFAS)

Per and polyfluoroalkyl substances (PFAS) present a unique challenge to remediation techniques because their strong carbon-fluorine bonds make them difficult to degrade. This review explores the use of in silico enzymatic design as a potential PFAS degradation technique. The scope of the enzymes included is based on currently known PFAS degradation techniques, including chemical redox systems that have been studied for perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) defluorination, such as those that incorporate hydrated electrons, sulfate, peroxide, and metal catalysts. Bioremediation techniques are also discussed, namely the laccase and horseradish peroxidase systems. The redox potential of known reactants and enzymatic radicals/metal-complexes are then considered and compared to potential enzymes for degrading PFAS. The molecular structure and reaction cycle of prospective enzymes are explored. Current knowledge and techniques of enzyme design, particularly radical-generating enzymes, and application are also discussed. Finally, potential routes for bioengineering enzymes to enable or enhance PFAS remediation are considered as well as the future outlook for computational exploration of enzymatic in situ bioremediation routes for these highly persistent and globally distributed contaminants.

Biodegradation Potential of C7-C10 Perfluorocarboxylic Acids and Data from the Genome of a New Strain of Pseudomonas mosselii 5(3)

The use of bacteria of the genus Pseudomonas-destructors of persistent pollutants for biotechnologies of environmental purification-is an interesting area of research. The aim of this work was to study the potential of Pseudomonas mosselii strain 5(3) isolated from pesticide-contaminated soil as a degrader of C7-C10 perfluorocarboxylic acids (PFCAs) and analyze its complete genome. The genome of the strain has been fully sequenced. It consists of a chromosome with a length of 5,676,241 b.p. and containing a total of 5134 genes, in particular, haloalkane dehalogenase gene (dhaA), haloacetate dehalogenase H-1 gene (dehH1), fluoride ion transporter gene (crcB) and alkanesulfonate monooxygenase gene (ssuE), responsible for the degradation of fluorinated compounds. The strain P. mosselii 5(3) for was cultivated for 7 days in a liquid medium with various C7-C10 PFCAs as the sole source of carbon and energy, and completely disposed of them. The results of LC-MS analysis showed that the transformation takes place due to perfluorohexanoic acid with the release of various levels of stoichiometry (depending on PFCA) of fluorine ion mineralization indicators determined by ion chromatography. Thus, Pseudomonas mosselii strain 5(3) demonstrates a genetically confirmed high potential for the decomposition of C7-C10 PFCA.

The Growth-Inhibitory Effect of Increased Planting Density Can Be Reduced by Abscisic Acid-Degrading Bacteria

High-density planting can increase crop productivity per unit area of cultivated land. However, the application of this technology is limited by the inhibition of plant growth in the presence of neighbors, which is not only due to their competition for resources but is also caused by growth regulators. Specifically, the abscisic acid (ABA) accumulated in plants under increased density of planting has been shown to inhibit their growth. The goal of the present study was to test the hypothesis that bacteria capable of degrading ABA can reduce the growth inhibitory effect of competition among plants by reducing concentration of this hormone in plants and their environment. Lettuce plants were grown both individually and three per pot; the rhizosphere was inoculated with a strain of Pseudomonas plecoglossicida 2.4-D capable of degrading ABA. Plant growth was recorded in parallel with immunoassaying ABA concentration in the pots and plants. The presence of neighbors indeed inhibited the growth of non-inoculated lettuce plants. Bacterial inoculation positively affected the growth of grouped plants, reducing the negative effects of competition. The bacteria-induced increase in the mass of competing plants was greater than that in the single ones. ABA concentration was increased by the presence of neighbors both in soil and plant shoots associated with the inhibition of plant growth, but accumulation of this hormone as well as inhibition of the growth of grouped plants was prevented by bacteria. The results confirm the role of ABA in the response of plants to the presence of competitors as well as the possibility of reducing the negative effect of competition on plant productivity with the help of bacteria capable of degrading this hormone.

Impact of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) on secondary sludge microorganisms: removal, potential toxicity, and their implications on existing wastewater treatment regulations in Canada

Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) are two of the most commonly researched per- and polyfluoroalkyl substances (PFAS). Globally, many long-chain PFAS compounds including PFOS and PFOA are highly regulated and, in some countries, PFAS use in commercial products is strictly prohibited. Despite the legal regulation of these 'forever chemicals' under the Canadian Environmental Protection Act, PFOA and PFOS compounds are still found in high concentrations in discharges from wastewater treatment plants, both from liquid and sludge streams. Yet, their potential impact on wastewater treatment effectiveness remains poorly understood. The findings of this research show that: (1) PFOS and PFOA might be hindering the overall outcome treatment performance - calling into question the efficacy of Canada's existing wastewater treatment regulatory standard (Wastewater Systems Effluent Regulations, SOR/2012-139), and (2) specific microorganisms from the Thiobacillus and Pseudomonas genera seem capable of adsorbing PFOS and PFOA onto their cell wall and even degrading the chemicals, but it is unclear as to what extent degradation occurs. The results also raise questions whether existing wastewater regulations should be expanded to include the detection and monitoring of PFAS, as well as the establishment of a regulatory wastewater treatment plant discharge standard for PFAS that is protective of human and ecological health.

Impact of per- and polyfluorinated alkyl substances (PFAS) on the marine environment: Raising awareness, challenges, legislation, and mitigation approaches under the One Health concept

Per- and polyfluorinated alkyl substances (PFAS) have long been known for their detrimental effects on the ecosystems and living organisms; however the long-term impact on the marine environment is still insufficiently recognized. Based on PFAS persistence and bioaccumulation in the complex marine food network, adverse effects will be exacerbated by global processes such as climate change and synergies with other pollutants, like microplastics. The range of fluorochemicals currently included in the PFAS umbrella has significantly expanded due to the updated OECD definition, raising new concerns about their poorly understood dynamics and negative effects on the ocean wildlife and human health. Mitigation challenges and approaches, including biodegradation and currently studied materials for PFAS environmental removal are proposed here, highlighting the importance of ongoing monitoring and bridging research gaps. The PFAS EU regulations, good practices and legal frameworks are discussed, with emphasis on recommendations for improving marine ecosystem management.

The effects of per- and polyfluoroalkyl substances on environmental and human microorganisms and their potential for bioremediation

Utilised in a variety of consumer products, per- and polyfluoroalkyl substances (PFAS) are major environmental contaminants that accumulate in living organisms due to their highly hydrophobic, lipophobic, heat-resistant, and non-biodegradable properties. This review summarizes their effects on microbial populations in soils, aquatic and biogeochemical systems, and the human microbiome. Specific microbes are insensitive to and even thrive with PFAS contamination, such as Escherichia coli and the Proteobacteria in soil and aquatic environments, while some bacterial species, such as Actinobacteria and Chloroflexi, are sensitive and drop in population. Some bacterial species, in turn, have shown success in PFAS bioremediation, such as Acidimicrobium sp. and Pseudomonas parafulva.

Biological treatment of perfluorooctanesulfonic acid (PFOS) using microbial capsules of a polysulfone membrane

Perfluorooctanesulfonic acid (PFOS) is a persistent organic substance that has been extensively applied in many industries and causes severe, widespread adverse health impacts on humans and the environment. The development of an effective PFOS treatment method with affordable operational costs has been expected. This study proposes the biological treatment of PFOS using microbial capsules enclosing a PFOS-reducing microbial consortium. The objective of this study was to evaluate the performance of the polymeric membrane encapsulation technique for the biological removal of PFOS. First, a PFOS-reducing bacterial consortium, composed of Paracoccus (72%), Hyphomicrobium (24%), and Micromonosporaceae (4%), was enriched from activated sludge by acclimation and subsequent subculturing with PFOS containing media. The bacterial consortium was first immobilized in alginate gel beads, then enclosed in membrane capsules by coating the gel beads with a 5% or 10% polysulfone (PSf) membrane. The introduction of microbial membrane capsules could increase PFOS reduction to between 52% and 74% compared with free cell suspension, which reduced by 14% over three weeks. Microbial capsules coated with 10% PSf membrane demonstrated the highest PFOS reduction at 80% and physical stability for six weeks. Candidate metabolites including perfluorobutanoic acid (PFBA) and 3,3,3- trifluoropropionic acid were detected by FTMS, suggesting the possible biological degradation of PFOS. In microbial membrane capsules, the initial adsorption of PFOS on the shell membrane layer enhanced subsequent biosorption and biological degradation by PFOS-reducing bacteria immobilized in the core alginate gel beads. The 10%-PSf microbial capsules exhibited a thicker membrane layer with the fabric structure of a polymer network, which maintained longer physical stability than 5%-PSf microbial capsules. This outcome suggests the potential application of microbial membrane capsules to PFOS-contaminated water treatment.

Microbial and thermal treatment techniques for degradation of PFAS in biosolids: A focus on degradation mechanisms and pathways

Per- and polyfluoroalkyl substances (PFAS) are persistent organic chemicals detected in biosolids worldwide, which have become a significant concern for biosolids applications due to their increasing environmental risks. Hence, it is pivotal to understand the magnitude of PFAS contamination in biosolids and implement effective technologies to reduce their contamination and prevent hazardous aftermaths. Thermal techniques such as pyrolysis, incineration and gasification, and biodegradation have been regarded as impactful solutions to degrade PFAS and transform biosolids into value-added products like biochar. These techniques can mineralize PFAS compounds under specific operating parameters, which can lead to unique degradation mechanisms and pathways. Understanding PFAS degradation mechanisms can pave the way to design the technology and to optimize the process conditions. Therefore, in this review, we aim to review and compare PFAS degradation mechanisms in thermal treatment like pyrolysis, incineration, gasification, smouldering combustion, hydrothermal liquefaction (HTL), and biodegradation. For instance, in biodegradation of perfluorooctane sulfonic acid (PFOS), firstly C-S bond cleavage occurs which is followed by hydroxylation, decarboxylation and defluorination reactions to form perfluoroheptanoic acid. In HTL, PFOS degradation is carried through OH^-catalyzed series of nucleophilic substitution and decarboxylation reactions. In contrast, thermal PFOS degradation involves a three-step random-chain scission pathway. The first step includes C-S bond cleavage, followed by defluorination of perfluoroalkyl radical, and radical chain propagation reactions. Finally, the termination of chain propagation reactions produces very short-fluorinated units. We also highlighted important policies and strategies employed worldwide to curb PFAS contamination in biosolids.

A Review: Per- and Polyfluoroalkyl Substances-Biological Degradation

Per- and polyfluoroalkyl substances (PFASs), highly stable synthetic organic compounds with multiple carbon-fluorine bonds, are emerging as environmental contaminants, toxic, bioaccumulative, and environmentally persistent. PFASs are strongly resistant to biological and chemical degradation, and therefore PFASs present a challenge to researchers and scientists for a better understanding and application of remediation methods and biodegradation of PFASs and have become subject to strict government regulations. The review summarizes the recent knowledge of bacterial and fungal degradation of PFASs, as well as the enzymes involved in the processes of transformation/degradation of PFASs.

Enhancement of perfluorooctanoic acid and perfluorooctane sulphonic acid removal in constructed wetland using iron mineral: Performance and mechanisms

Polyfluoroalkyl substance (PFAS) pose a threat to the aquatic environment due to their environmental persistence. The removal of PFAS using constructed wetlands (CWs) has received interest, but the adsorption saturation and limited removal capacity of the substrate is frequently challenging. To enhance the microbial degradation and performance of the substrate, different configurations of iron minerals were used as substrate to remove perfluorooctane sulphonic acid (PFOS) and perfluorooctanoic acid (PFOA) from CWs. The addition of iron minerals resulted in elimination of 57.2% and 63.9% of PFOS and PFOA in the effluent, respectively, which were 35.0% and 36.8% higher than that of control. Moreover, up to 85.4%, 86%, and 85.1% of NH₄⁺, NO₃^-, and phosphorus, respectively, was removed using iron minerals. The enhanced electron transfer in iron mineral-based CWs was confirmed by a 61.2% increase in cytochrome C reductase content and an increased Fe(III)/Fe(II) ratio. Microbial analysis showed that the proportions of microbes with PFAS removal capacity (e.g. Burkholderiae and Pseudomonas), and the key pathways of the TCA cycle and glycolysis were increased in iron mineral-based CW. Based on these findings, we conclude that supplementation with iron mineral could enhance PFOA and PFOS removal in CWs.

A review of PFAS adsorption from aqueous solutions: Current approaches, engineering applications, challenges, and opportunities

Per- and polyfluoroalkyl substances (PFAS) have drawn great attention due to their wide distribution in water bodies and toxicity to human beings. Adsorption is considered as an efficient treatment technique for meeting the increasingly stringent environmental and health standards for PFAS. This paper systematically reviewed the current approaches of PFAS adsorption using different adsorbents from drinking water as well as synthetic and real wastewater. Adsorbents with large mesopores and high specific surface area adsorb PFAS faster, their adsorption capacities are higher, and the adsorption process are usually more effective under low pH conditions. PFAS adsorption mechanisms mainly include electrostatic attraction, hydrophobic interaction, anion exchange, and ligand exchange. Various adsorbents show promising performances but challenges such as requirements of organic solvents in regeneration, low adsorption selectivity, and complicated adsorbent preparations should be addressed before large scale implementation. Moreover, the aid of decision-making tools including response surface methodology (RSM), techno-economic assessment (TEA), life cycle assessment (LCA), and multi criteria decision analysis (MCDA) were discussed for engineering applications. The use of these tools is highly recommended prior to scale-up to determine if the specific adsorption process is economically feasible and sustainable. This critical review presented insights into the most fundamental aspects of PFAS adsorption that would be helpful to the development of effective adsorbents for the removal of PFAS in future studies and provide opportunities for large-scale engineering applications.

The fate and behavior of perfluorooctanoic acid (PFOA) in constructed wetlands: Insights into potential removal and transformation pathway

Although constructed wetland (CW) technology is widely used to eliminate emerging organic pollutants, the removal pathway of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in CW system have not been fully understood yet. This study aims to deeply probe into the fate and behavior of perfluorooctanoic acid (PFOA) in CW system. Findings indicated that the removal efficiency of PFOA by CW system was 49.69-73.63 % with initial concentrations at 100-1000 μg/L. Substrate was the main "sink" of PFOA into the CWs (46.22-50.83 %), and the plant uptake (1.99-2.48 %) accounted for a small proportion. Transformation products in the effluent of CW systems included a series of short-chain perfluorinated carboxylic acids (PFCAs), hydrogen-containing perfluoroalkanes and other organic fluorides. Activated pathways of xenobiotics biodegradation suggested that enzyme-mediated biochemical reactions might be responsible for the PFOA transformation. The transformation pathway included enzymatic decarboxylation, hydroxylation, hydrolysis, dehydrogenation and dehalogenation, as well as non-enzymatic reactions. These discoveries provide new insights into the in-depth understanding environmental behavior of PFOA in ecosystem and lay the foundation for further ecological remediation.

A review of microbial degradation of per- and polyfluoroalkyl substances (PFAS): Biotransformation routes and enzymes

Since the 1950s, copious amounts of per- and polyfluoroalkyl substances (PFAS) (dubbed "forever chemicals") have been dumped into the environment, causing heavy contamination of soil, surface water, and groundwater sources. Humans, animals, and the environment are frequently exposed to PFAS through food, water, consumer products, as well as waste streams from PFAS-manufacturing industries. PFAS are a large group of synthetic organic fluorinated compounds with widely diverse chemical structures that are extremely resistant to microbial degradation. Their persistence, toxicity to life on earth, bioaccumulation tendencies, and adverse health and ecological effects have earned them a "top priority pollutant" designation by regulatory bodies. Despite that a number of physicochemical methods exist for PFAS treatment, they suffer from major drawbacks regarding high costs, use of high energy and incomplete mineralization (destruction of the CF bond). Consequently, microbial degradation and enzymatic treatment of PFAS are highly sought after as they offer a complete, cheaper, sustainable, and environmentally friendly alternative. In this critical review, we provide an overview of the classification, properties, and interaction of PFAS within the environment relevant to microbial degradation. We discuss latest developments in the biodegradation of PFAS by microbes, transformation routes, transformation products and degradative enzymes. Finally, we highlight the existing challenges, limitations, and prospects of bioremediation approaches in treating PFAS and proffer possible solutions and future research directions.

Recent progress and challenges on the removal of per- and poly-fluoroalkyl substances (PFAS) from contaminated soil and water

Currently, due to an increase in urbanization and industrialization around the world, a large volume of per- and poly-fluoroalkyl substances (PFAS) containing materials such as aqueous film-forming foam (AFFF), protective coatings, landfill leachates, and wastewater are produced. Most of the polluted wastewaters are left untreated and discharged into the environment, which causes high environmental risks, a threat to human beings, and hampered socioeconomic growth. Developing sustainable alternatives for removing PFAS from contaminated soil and water has attracted more attention from policymakers and scientists worldwide under various conditions. This paper reviews the recent emerging technologies for the degradation or sorption of PFAS to treat contaminated soil and water. It highlights the mechanisms involved in removing these persistent contaminants at a molecular level. Recent advances in developing nanostructured and advanced reduction remediation materials, challenges, and perspectives in the future are also discussed. Among the variety of nanomaterials, modified nano-sized iron oxides are the best sorbents materials due to their specific surface area and photogenerated holes and appear extremely promising in the remediation of PFAS from contaminated soil and water.

Emerging technologies for PFOS/PFOA degradation and removal: A review

Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) are highly recalcitrant anthropogenic chemicals that are ubiquitously present in the environment and are harmful to humans. Typical water and wastewater treatment processes (coagulation, flocculation, sedimentation, and filtration) are proven to be largely ineffective, while adsorption with granular activated carbon (GAC) has been the chief option to capture them from aqueous sources followed by incineration. However, this process is time-consuming, and produces additional solid waste and air pollution. Treatment methods for PFOS and PFOA generally follow two routes: (1) removal from source and reduce the risk; (2) degradation. Emerging technologies focusing on degradation are critically reviewed in this contribution. Various processes such as bioremediation, electrocoagulation, foam fractionation, sonolysis, photocatalysis, mechanochemical, electrochemical degradation, beams of electron and plasma have been developed and studied in the past decade to address PFAS crisis. The underlying mechanisms of these PFAS degradation methods have been categorized. Two main challenges have been identified, namely complexity in large scale operation and the release of toxic byproducts. Based on the literature survey, we have provided a strength-weakness-opportunity-threat (SWOT) analysis and quantitative rating on their efficiency, environmental impact and technology readiness.

Effects of Humic Substances on the Growth of Pseudomonas plecoglossicida 2,4-D and Wheat Plants Inoculated with This Strain

Both rhizosphere bacteria and humic substances (HSs) can promote plant growth when applied individually and even greater effects of their combination have been demonstrated. We aimed to elucidate the relative importance of the stimulating effects of HSs on bacterial growth and the effects of the combination of bacteria and HSs on plants themselves. The effects of humic (HA) and fulvic acids (FA) (components of humic substances) on the growth of Pseudomonas plecoglossicida 2,4-D in vitro were studied. We also studied the effects of this bacterial strain and HSs applied individually or in combination on the growth of wheat plants. Although the 2,4-D strain showed low ability to use HSs as the sole source of nutrition, the bacterial growth rate was increased by FA and HA, when other nutrients were available. HSs increased root colonization with bacteria, the effect being greater in the case of HA. The effects on roots and shoots increased when bacteria were associated with HSs. FA+ 2,4-D was more effective in stimulating shoot growth, while HA + 2,4-D was in the case of root growth. The latter effect is likely to be beneficial under edaphic stresses.

Long-term effect of perfluorooctanoic acid on the anammox system based on metagenomics: Performance, sludge characteristic and microbial community dynamic

The effects of PFOA on the nitrogen removal performance, microbial community and functional genes of anaerobic ammonium oxidation (anammox) sludge in an anaerobic baffled reactor (ABR) were investigated. The removal efficiencies of ammonia nitrogen (NH₄⁺-N) and nitrite (NO₂^--N) decreased from 93.90 ± 3.64% and 98.6 ± 1.84% to 77.81 ± 6.86% and 77.96 ± 1.88% when PFOA increased from 5 mg/L to 50 mg/L, respectively. X-ray photoelectron spectra analysis of the anammox sludge showed the presence of both C-F and CaF₂ forms of F. Metagenomics analysis of the anammox sludge in the first compartment illustrated that the relative abundance of Ca.Brocadia and Ca.Kuenenia decreased from 22.21% and 5.61% to 2.11% and 2.84% at 50 mg/L PFOA compared with that without PFOA. In addition, the nitrogen metabolism pathway showed that adding 50 mg/L PFOA decreased the expression of HzsB, HzsC, and Hdh (anammox genes) by 0.096%, 0.05% and 0.062%, respectively.

Biodegradation of PFOA in microbial electrolysis cells by Acidimicrobiaceae sp. strain A6

Acidimicrobiaceae sp. strain A6 (A6), is an anaerobic autotrophic bacterium capable of oxidizing ammonium (NH₄⁺) while reducing ferric iron and is also able to defluorinate PFAS under these growth conditions. A6 is exoelectrogenic and can grow in microbial electrolysis cells (MECs) by using the anode as the electron acceptor in lieu of ferric iron. Therefore, cultures of A6 amended with perfluorooctanoic acid (PFOA) were incubated in MECs to investigate its ability to defluorinate PFAS in such reactors. Results show a significant decrease in PFOA concentration after 18 days of operation, while producing current and removing NH₄⁺. The buildup of fluoride and shorter chain perfluorinated products was detected only in MECs with applied potential, active A6, and amended with PFOA, confirming the biodegradation of PFOA in these systems. This work sets the stage for further studies on the application of A6-based per- and polyfluorinated alkyl substances (PFAS) bioremediation in microbial electrochemical systems for water treatment.

Bioremediation of Perfluoroalkyl Substances (PFAS) by Anaerobic Digestion: Effect of PFAS on Different Trophic Groups and Methane Production Accelerated by Carbon Materials

Per- and polyfluoroalkyl substances (PFAS) are recalcitrant pollutants which tend to persist in soils and aquatic environments and their remediation is among the most challenging with respect to organic pollutants. Anaerobic digestion (AD) supplemented with low amounts of carbon materials (CM), acting as electron drivers, has proved to be an efficient process for the removal of organic compounds from wastewater. This work explores the impact of PFAS on different trophic groups in anaerobic communities, and the effect of carbon nanotubes (CNT), activated carbon (AC), and oxidized AC (AC-HNO₃), as electron shuttles on the anaerobic bioremoval of these compounds, based on CH₄ production. The inhibition of the specific methanogenic activity (SMA) exerted by perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), at a concentration of 0.1 mg L⁻¹, was below 10% for acetoclastic and below 15%, for acetogenic communities. Hydrogenotrophic methanogens were not affected by the presence of PFAS. All CM reduced the negative impact of PFAS on the CH₄ production rate, but AC was the best. Moreover, the methanization percentage (MP) of sewage sludge (SS) increased 41% in the presence of PFOS (1.2 g L⁻¹) and AC. In addition, AC fostered an increase of 11% in the MP of SS+PFOS, relative to the condition without AC. AC promoted detoxification of PFOA- and PFOS-treated samples by 51% and 35%, respectively, as assessed by Vibrio fischeri assays, demonstrating the advantage of bringing AD and CM together for PFAS remediation.

Comparative characterization of microbial communities that inhabit PFAS-rich contaminated sites: A case-control study

The historic usage and discharge of per- and polyfluoroalkyl substances (PFAS) containing chemicals have produced many contaminated sites and PFAS contamination has become a global concern due to their persistence, widespread distribution, and potential adverse impacts for human and environmental health. However, there have been limited investigations on the specific behavior of bacterial communities in PFAS contaminated soils. In this study, a quantitative PCR assay and Illumina MiSeq sequencing were used to investigate the variations of bacterial communities in a regional Australian airport contaminated with PFAS. The dominate PFAS detected in soil samples was Perfluorooctanesulfonic acid (PFOS), which accounted for 82% of total PFAS and the maximum PFOS level was noted (20,947±1824 ng.PFOS/mg.Soil) at the top soil. Irrespective of the degree of PFAS contamination at different depths, the comparable percentile contribution of each PFAS was observed in soil samples. Significantly higher bacteria amplicon sequence variant (ASV) and diversity were noted in uncontaminated soil than PFAS contaminated soil. Bacterial genera Rhodanobacter and Chujaibacter were dominant in the PFAS contaminated soil. Three different bacterial genera of Alphaproteobacteria, Ambiguous taxa of Acidobacteriia, and genus Chujaibacter of Gammaproteobacteria showed a significant positive correlation and RB41, Gaiella showed a significant negative correlation with 11 different PFAS concentrations. Overall, the results presented in this study suggest that the counts and species diversity of soil microorganisms are adversely influenced by PFAS contamination.

Bioremediation of perfluorochemicals: current state and the way forward

Perfluorochemicals are widely found in the environment due to their versatile uses and persistent nature. Perfluorochemicals have also been detected in human and animals due to direct or indirect exposures, giving rise to health concerns. This review aims to examine the bioremediation of perfluorochemicals with plants, bacteria and fungi, including their efficiency and limitations. It also aims to propose the future prospects of bioremediation of perfluorochemicals. This review retrieved peer-reviewed journal articles published between 2010 and 2021 from journal databases consisting of Web of Science, Scopus and ScienceDirect. This review shows that multiple Pseudomonas species could degrade perfluorochemicals particularly perfluoroalkyl acids under aerobic condition. Acidimicrobium sp. degraded perfluoroalkyl acids anaerobically in the presence of electron donors. A mixed Pseudomonas culture was more effective than pure cultures. Multiple plants were found to bioconcentrate perfluorochemicals and many demonstrated the ability to hyperaccumulate perfluoroalkyl acids, particularly Festuca rubra, Salix nigra and Betula nigra. Fungal species, particularly Pseudeurotium sp. and Geomyces sp., have the potential to degrade perfluorooctanoic acid or perfluorooctane sulphonic acid. Perfluorochemicals bioremediation could be advanced with identification of more candidate species for bioremediation, optimization of bioremediation conditions, mixed culturing, experiments with environmental media and studies on the biochemical pathways of biotransformation. This review provides comprehensive insight into the efficiency of different bacterial, plant and fungal species in perfluorochemicals bioremediation under different conditions, their limitations and improvement.

Anaerobic Microbial Dechlorination of 6:2 Chlorinated Polyfluorooctane Ether Sulfonate and the Underlying Mechanisms

The microbial transformation potential of 6:2 chlorinated polyfluorooctane ether sulfonate (6:2 Cl-PFESA) was explored in anaerobic microbial systems. Microbial communities from anaerobic wastewater sludge, an anaerobic digester, and anaerobic dechlorinating cultures enriched from aquifer materials reductively dechlorinated 6:2 Cl-PFESA to 6:2 hydrogen-substituted polyfluorooctane ether sulfonate (6:2 H-PFESA), which was identified as the sole metabolite by non-target analysis. Rapid and complete reductive dechlorination of 6:2 Cl-PFESA was achieved by the anaerobic dechlorinating cultures. The microbial community of the anaerobic dechlorinating cultures was impacted by 6:2 Cl-PFESA exposure. Organohalide-respiring bacteria originally present in the anaerobic dechlorinating cultures, including Geobacter, Dehalobacter, and Dehalococcoides, decreased in relative abundance over time. As the relative abundance of organohalide-respiring bacteria decreased, the rates of 6:2 Cl-PFESA dechlorination decreased, suggesting that the most likely mechanism for reductive dechlorination of 6:2 Cl-PFESA was co-metabolism rather than organohalide respiration. Reductive defluorination of 6:2 Cl-PFESA was not observed. Furthermore, 6:2 H-PFESA exhibited 5.5 times lower sorption affinity to the suspended biosolids than 6:2 Cl-PFESA, with the prospect of increased mobility in the environment. These results show the susceptibility of 6:2 Cl-PFESA to microbially mediated reductive dechlorination and the likely persistence of the product, 6:2 H-PFESA, in anaerobic environments.

PFAS Molecules: A Major Concern for the Human Health and the Environment

Per- and polyfluoroalkyl substances (PFAS) are a group of over 4700 heterogeneous compounds with amphipathic properties and exceptional stability to chemical and thermal degradation. The unique properties of PFAS compounds has been exploited for almost 60 years and has largely contributed to their wide applicability over a vast range of industrial, professional and non-professional uses. However, increasing evidence indicate that these compounds represent also a serious concern for both wildlife and human health as a result of their ubiquitous distribution, their extreme persistence and their bioaccumulative potential. In light of the adverse effects that have been already documented in biota and human populations or that might occur in absence of prompt interventions, the competent authorities in matter of health and environment protection, the industries as well as scientists are cooperating to identify the most appropriate regulatory measures, substitution plans and remediation technologies to mitigate PFAS impacts. In this review, starting from PFAS chemistry, uses and environmental fate, we summarize the current knowledge on PFAS occurrence in different environmental media and their effects on living organisms, with a particular emphasis on humans. Also, we describe present and provisional legislative measures in the European Union framework strategy to regulate PFAS manufacture, import and use as well as some of the most promising treatment technologies designed to remediate PFAS contamination in different environmental compartments.

Biodegradation of per- and polyfluoroalkyl substances (PFAS): A review

Per- and polyfluoroalkyl substances (PFAS) are a group of chemicals widely manufactured for industrial and commercial applications in the past decades due to their remarkable stability as well as hydrophobic and lipophobic nature. PFAS species have been recognized as emerging environmental contaminants of concern due to their toxicity and environmental persistence, thereby attracting intensive research seeking effective technologies for their removal from the environment. The objective of this review is to provide a thorough analysis of the biodegradation of PFAS in multiple environmental matrices and offer a future outlook. By discussing targeted PFAS species, degradation intermediates, degradation efficiencies, and microbial species, a comprehensive summary of the known microbial species and their degradation pathways are presented. The biodegradation pathways for different types of PFAS species are summarized in two major categories, biodegradation with and without the cleavage of C-F bond. Existing uncertainties and future research directions for PFAS biodegradation are provided.

Per/polyfluoroalkyl substances production, applications and environmental impacts

The per/polyfluoroalkyl substances (PFAS) are growing contaminants which are extremely difficult to get degraded naturally. PFAS have been produced for nearly a century using electrochemical flourination and more relomerization processes. High chemical resistance, hydrophobicity, lipophobicity, heat resistace, extremly low friction coefficient make this class of chemicals invaluable for many applications. These same properties useful unfortunately make them 'forever chemicals' once released into the envrironment. This review focuses on the production and applications of PFAs, determining the concentration of PFAs in environmental and biological matrices and their efficient degradation. Various methods of detection of PFAS have been developed but insitu methods of detction are still in the early stages of development. Current chemical and biological remediation technologies are expensive/not effective and thus new remediation technolgies must be developed. It is imperative to focus on methods for detection of the short chain PFAS with their projected increased use.

Environmental occurrence and remediation of emerging organohalides: A review

As replacements for "old" organohalides, such as polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs), "new" organohalides have been developed, including decabromodiphenyl ethane (DBDPE), short-chain chlorinated paraffins (SCCPs), and perfluorobutyrate (PFBA). In the past decade, these emerging organohalides (EOHs) have been extensively produced as industrial and consumer products, resulting in their widespread environmental distribution. This review comprehensively summarizes the environmental occurrence and remediation methods for typical EOHs. Based on the data collected from 2015 to 2021, these EOHs are widespread in both abiotic (e.g., dust, air, soil, sediment, and water) and biotic (e.g., bird, fish, and human serum) matrices. A significant positive correlation was found between the estimated annual production amounts of EOHs and their environmental contamination levels, suggesting the prohibition of both production and usage of EOHs as a critical pollution-source control strategy. The strengths and weaknesses, as well as the future prospects of up-to-date remediation techniques, such as photodegradation, chemical oxidation, and biodegradation, are critically discussed. Of these remediation techniques, microbial reductive dehalogenation represents a promising in situ remediation method for removal of EOHs, such as perfluoroalkyl and polyfluoroalkyl substances (PFASs) and halogenated flame retardants (HFRs).

Draft Genome Sequence of the Bacterium Delftia acidovorans Strain D4B, Isolated from Soil

Delftia acidovorans strain D4B is an aerobic bacterium within the Betaproteobacteria lineage that was isolated from soil. The genome size is 6.26 Mbp, with a G+C content of 67%. The genome encodes enzymes potentially involved in the degradation of fluorinated compounds.

Per- and polyfluoroalkyl substances (PFASs) in the soil-plant system: Sorption, root uptake, and translocation

Per- and polyfluoroalkyl substances (PFASs) are ubiquitous in the environment but pose potential risks to ecosystems and human health. The soil-plant system plays an important role in the bioaccumulation of PFASs. Because most PFASs in the natural environment are anionic and amphiphilic (both lipophilic and hydrophilic), their sorption and accumulation behaviors differ from those of neutral organic and common ionic compounds. In this review, we discuss processes affecting the availability of PFASs in soil after analyzing the potential mechanisms underlying the sorption and uptake of PFASs in the soil-plant system. We also summarize the current knowledge on root uptake and translocation of PFASs in plants. We found that the root concentration factor of PFASs for plants grown in soil was not significantly correlated with hydrophobicity, whereas the translocation factor was significantly and negatively correlated with PFAS hydrophobicity regardless of whether plants were grown hydroponically or in soil. Further research on the cationic, neutral, and zwitterionic forms of diverse PFASs is urgently needed to comprehensively understand the environmental fates of PFASs in the soil-plant system. Additional research directions are suggested, including the development of more accurate models and techniques to evaluate the bioavailability of PFASs, the effects of root exudates and rhizosphere microbiota on the bioavailability and plant uptake of PFASs, and the roles of different plant organelles, lipids, and proteins in the accumulation of PFASs by plants.

Removal of perfluoroalkyl acids (PFAAs) in constructed wetlands: Considerable contributions of submerged macrophytes and the microbial community

The broad application of perfluoroalkyl acids (PFAAs) has attracted global concern regarding their adverse environmental effects. The possible removal processes of PFAAs in constructed wetlands were excavated and quantified using two typical submerged macrophytes (rooted Potamogeton wrightii and rootless Ceratophyllum demersum). Our results showed that 33.59-88.99% of PFAAs could be removed via not only sediment sorption or phytoextraction but also by the bioaccumulation of microbiota. The sediment acts as a vital sink for PFAAs, preloading 23.51-50.09% and 16.65-52.18% of PFAAs in treatments with P. wrightii (Pw1) and C. demersum (Cd1), respectively. C. demersum showed a better capacity to accumulate PFAAs (0.91-32.03%) than P. wrightii (<10%). Considerable PFAAs were observed to be distributed in microbes, underlining the non-negligible role of microbiota in bioaccumulating PFAAs. The contributions of planktonic microbes, biofilm microbes, and extracellular polymeric substances in biofilms were 0.39-20.96%, 0.03-7.95%, and 0.39-14.15% in Pw1 and 0.23-15.68%, 0.01-15.68%, and 0.53-26.77% in Cd1, respectively. The adsorption/uptake was significantly correlated with the perfluoroalkyl chain length (p<0.05), except for the uptake of biofilms in C. demersum. Furthermore, PFAAs and submerged macrophytes could decrease the richness of microbiota but increase the relative abundance of some strains in Betaproteobacteriales, Sphingomonadales, and Cytophagales. Our results were helpful for understanding the removal processes of PFAAs in constructed wetlands and their linkages with PFAA properties, thus further providing insight into the management and removal of emerging organic contaminants.

Fate and transport of per- and polyfluoroalkyl substances (PFASs) in the vadose zone

Per- and polyfluoroalkyl substances (PFASs) are a heterogeneous group of persistent organic pollutants that have been detected in various environmental compartments around the globe. Emerging research has revealed the preferential accumulation of PFASs in shallow soil horizons, particularly at sites impacted by firefighting activities, agricultural applications, and atmospheric deposition. Once in the vadose zone, PFASs can sorb to soil, accumulate at interfaces, become volatilized, be taken up in biota, or leach to the underlying aquifer. At the same time, polyfluorinated precursor species may transform into highly recalcitrant perfluoroalkyl acids, changing their chemical identity and thus transport behavior along the way. In this review, we critically discuss the current state of the knowledge and aim to interconnect the complex processes that control the fate and transport of PFASs in the vadose zone. Furthermore, we identify key challenges and future research needs. Consequently, this review may serve as an interdisciplinary guide for the risk assessment and management of PFAS-contaminated sites.

Removal of Per- and Polyfluoroalkyl Substances (PFASs) in Aqueous Film-Forming Foam (AFFF) Using Ion-Exchange and Nonionic Resins

Despite benefits to the firefighting industry, the release of per- and polyfluoroalkyl substances (PFASs) from aqueous film-forming foam (AFFF) into aquatic systems poses significant risks to human health and other organisms. While anion-exchange technologies have proven to be effective for removing perfluoroalkyl acids (PFAAs) from water, their effectiveness for removing the diverse PFAS structures discovered in AFFF remains unknown. Here, we report on the adsorption of 75 PFASs, including 63 polyfluorinated substances, in a diluted AFFF mixture using 14 commercially available ion-exchange (IX)/nonionic resins and granular activated carbon (GAC). Results showed that anion-exchange resins (AERs) exhibited significant adsorption of PFASs compared to cation-exchange resins (CERs), nonionic resins (NIRs), and GAC regardless of the PFAS's predicted charge. Isotherm data showed that macroporous AERs have a higher PFAS adsorption capacity compared to gel-type AERs. Cross-correlation comparison of PFAS/Cl^- selectivity coefficients (K_ex) for each PFAS-AER combination showed that the hydrophobicity of the AER functional group, and polymer matrix played a dominant role in determining resin affinity for PFASs. PFAS structural characteristics also significantly affected adsorption, with increasing chain length and a net negative charge increasing the extent of adsorption. Results from this study provide guidelines for the selection of resins to adsorb a wider range of PFASs and meaningful insights for the development of quantitative models for IX treatment of AFFF-impacted water.

Challenges and Current Status of the Biological Treatment of PFAS-Contaminated Soils

Per- and polyfluoroalkyl substances (PFAS) are Synthetic Organic Compounds (SOCs) which are of current concern as they are linked to a myriad of adverse health effects in mammals. They can be found in drinking water, rivers, groundwater, wastewater, household dust, and soils. In this review, the current challenge and status of bioremediation of PFAs in soils was examined. While several technologies to remove PFAS from soil have been developed, including adsorption, filtration, thermal treatment, chemical oxidation/reduction and soil washing, these methods are expensive, impractical for in situ treatment, use high pressures and temperatures, with most resulting in toxic waste. Biodegradation has the potential to form the basis of a cost-effective, large scale in situ remediation strategy for PFAS removal from soils. Both fungal and bacterial strains have been isolated that are capable of degrading PFAS; however, to date, information regarding the mechanisms of degradation of PFAS is limited. Through the application of new technologies in microbial ecology, such as stable isotope probing, metagenomics, transcriptomics, and metabolomics there is the potential to examine and identify the biodegradation of PFAS, a process which will underpin the development of any robust PFAS bioremediation technology.

Remediation of poly- and perfluoroalkyl substances (PFAS) contaminated soils - To mobilize or to immobilize or to degrade?

Poly- and perfluoroalkyl substances (PFASs) are synthetic chemicals, which are introduced to the environment through anthropogenic activities. Aqueous film forming foam used in firefighting, wastewater effluent, landfill leachate, and biosolids are major sources of PFAS input to soil and groundwater. Remediation of PFAS contaminated solid and aqueous media is challenging, which is attributed to the chemical and thermal stability of PFAS and the complexity of PFAS mixtures. In this review, remediation of PFAS contaminated soils through manipulation of their bioavailability and destruction is presented. While the mobilizing amendments (e.g., surfactants) enhance the mobility and bioavailability of PFAS, the immobilizing amendments (e.g., activated carbon) decrease their bioavailability and mobility. Mobilizing amendments can be applied to facilitate the removal of PFAS though soil washing, phytoremediation, and complete destruction through thermal and chemical redox reactions. Immobilizing amendments are likely to reduce the transfer of PFAS to food chain through plant and biota (e.g., earthworm) uptake, and leaching to potable water sources. Future studies should focus on quantifying the potential leaching of the mobilized PFAS in the absence of removal by plant and biota uptake or soil washing, and regular monitoring of the long-term stability of the immobilized PFAS.

Developing a roadmap to determine per- and polyfluoroalkyl substances-microbial population interactions

We collected over 40 groundwater samples from a per- and polyfluoroalkyl substances (PFAS) impacted legacy fire fighting training area in Canada to develop an in-depth assessment of the relationship between PFAS and in situ microbial communities. Results suggest differential transport of PFAS of differing chain-length and head group. There is also evidence of PFAS degradation, in particular 6:2 FTS degradation. Although PFAS constituents were not major drivers of microbial community structure, the relative abundance of over one hundred individual genera were significantly associated with PFAS chemistry. For example, lineages within the Oxalobacteraceae family had strong negative correlations with PFAS, whilst the Desulfococcus genus has strong positive correlations. Results also suggest a range of genera may have been stimulated at low to mid-range concentrations (e.g., Gordonia and Acidimicrobium), with some genera potentially inhibited at high PFAS concentrations. Any correlations identified need to be further investigated to determine the underlying reasons for observed associations as this is an open field site with the potential for many confounding factors. Positive correlations may ultimately provide important insights related to development of biodegradation technologies for PFAS impacted sites, while negative correlations further improve our understanding of the potential negative effects of PFAS on ecosystem health.

Capacity of Pseudomonas Strains to Degrade Hydrocarbons, Produce Auxins and Maintain Plant Growth under Normal Conditions and in the Presence of Petroleum Contaminants

The phytoremediation of soil contaminated with petroleum oil products relies on co-operation between plants and rhizosphere bacteria, including the plant growth-promoting effect of the bacteria. We studied the capacity of strains of Pseudomonas, selected as oil degraders, to produce plant hormones and promote plant growth. Strains with intermediate auxin production were the most effective in stimulating the seedling growth of seven plant species under normal conditions. Bacterial seed treatment resulted in about a 1.6-fold increase in the weight of barley seedlings, with the increment being much lower in other plant species. The strains P. plecoglossicida 2.4-D and P. hunanensis IB C7, characterized by highly efficient oil degradation (about 70%) and stable intermediate in vitro auxin production in the presence of oil, were selected for further study with barley. These strains increased the seed germination percentage approximately two-fold under 5% oil concentration in the soil, while a positive effect on further seedling growth was significant when the oil concentration was raised to 8%. This resulted in a 1.3–1.7-fold increase in the seedling mass after 7 days of growth, depending on the bacterial strain. Thus, strains of oil-degrading bacteria selected for their intermediate and stable production of auxin were found to be effective ameliorators of plant growth inhibition resulting from petroleum stress.

Accumulation and effects of perfluoroalkyl substances in three hydroponically grown Salix L. species

The potential of young rooted cuttings of three Salix L. species plants to accumulate a mixture of eleven perfluoroalkyl substances (PFASs), in particular, perfluoroalkyl acids (PFAAs), from the nutrient solution and their effects on plant growth and photosynthesis were assessed in an 8-day experiment. The growth rate of the willow plants exposed to the PFAA mixture was not much affected except for S. triandra. Regarding photosynthesis, the gas exchange parameters were affected more than those related to chlorophyll fluorescence, with significant increase of the net CO₂ assimilation rate and parameters related to stomatal conductance. A decreasing trend in the PFAA concentration in leaves with increasing carbon chain length was observed, whereas long-chain PFAAs showed higher concentrations in roots. Accordingly, the foliage to root concentration factor highlighted that PFAAs with shorter carbon chain length (C ≤ 7) translocated and accumulated relatively more in leaves compared to roots. Removal efficiency of individual PFAAs for leaves and roots were comparatively higher with S. eleagnos and S. purpurea than S. triandra, with mean removal values at the whole plant level ranging around 10% of the amount initially spiked, suggesting their potential for phytoremediation of PFASs.

On the Ability of Perfluorohexane Sulfonate (PFHxS) Bioaccumulation by Two Pseudomonas sp. Strains Isolated from PFAS-Contaminated Environmental Matrices

PFASs (perfluoroalkyl and polyfluoroalkyl substances) are highly fluorinated, aliphatic, synthetic compounds with high thermal and chemical stability as well as unique amphiphilic properties which make them ingredients in a range of industrial processes. PFASs have attracted consideration due to their persistence, toxicity and bioaccumulation tendency in the environment. Recently, attention has begun to be addressed to shorter-chain PFASs, such as perfluorohexane sulfonate [PFHxS], apparently less toxic to and more easily eliminated from lab animals. However, short-chain PFASs represent end-products from the transformation of fluorotelomers whose biotic breakdown reactions have not been identified to date. This means that such emergent pollutants will tend to accumulate and persist in ecosystems. Since we are just learning about the interaction between short-chain PFASs and microorganisms, this study reports on the response to PFHxS of two Pseudomonas sp. strains isolated from environmental matrices contaminated by PFASs. The PFHxS bioaccumulation potential of these strains was unveiled by exploiting different physiological conditions as either axenic or mixed cultures under alkanothrofic settings. Moreover, electron microscopy revealed nonorthodox features of the bacterial cells, as a consequence of the stress caused by both organic solvents and PFHxS in the culturing substrate.

Phytohormone Mediation of Interactions Between Plants and Non-Symbiotic Growth Promoting Bacteria Under Edaphic Stresses

The capacity of rhizoshere bacteria to influence plant hormonal status, by bacterial production or metabolism of hormones, is considered an important mechanism by which they promote plant growth, and productivity. Nevertheless, inoculating these bacteria into the plant rhizosphere may produce beneficial or detrimental results depending on bacterial effects on hormone composition and quantity in planta, and the environmental conditions under which the plants are growing. This review considers some effects of bacterial hormone production or metabolism on root growth and development and shoot physiological processes. We analyze how these changes in root and shoot growth and function help plants adapt to their growth conditions, especially as these change from optimal to stressful. Consistent effects are addressed, along with plant responses to specific environmental stresses: drought, salinity, and soil contamination (with petroleum in particular).

Defluorination of Perfluorooctanoic Acid (PFOA) and Perfluorooctane Sulfonate (PFOS) by Acidimicrobium sp. Strain A6

Incubations with pure and enrichment cultures of Acidimicrobium sp. strain A6 (A6), an autotroph that oxidizes ammonium to nitrite while reducing ferric iron, were conducted in the presence of PFOA or PFOS at 0.1 mg/L and 100 mg/L. Buildup of fluoride, shorter-chain perfluorinated products, and acetate was observed, as well as a decrease in Fe(III) reduced per ammonium oxidized. Incubations with hydrogen as a sole electron donor also resulted in the defluorination of these PFAS. Removal of up to 60% of PFOA and PFOS was observed during 100 day incubations, while total fluorine (organic plus fluoride) remained constant throughout the incubations. To determine if PFOA/PFOS or some of their degradation products were metabolized, and since no organic carbon source except these PFAS was added, dissolved organic carbon (DOC) was tracked. At concentrations of 100 mg/L, PFOA/PFOS were the main contributors to DOC, which remained constant during the pure A6 culture incubations. Whereas in the A6 enrichment culture, DOC decreased slightly with time, indicating that as defluorination of PFOS/PFOA occurred, some of the products were being metabolized by heterotrophs present in this culture. Results show that A6 can defluorinate PFOA/PFOS while reducing iron, using ammonium or hydrogen as the electron donor.