Perspectives on whole-organ assembly: moving toward transplantation on demand

In Vivo Regeneration of Tubular Small Intestine With Motility: A Novel Approach by Orthotopic Transplantation of Decellularized Scaffold

BACKGROUND

Whole-intestine engineering can provide a therapeutic alternative to bowel transplantation. Intestinal components including the mucosa, muscular layer, enteric nervous system, and vasculature must be reestablished as a tubular organ to generate an artificial small intestine. This study proposes a novel approach to produce a transplantable, well-organized tubular small intestine using a decellularized scaffold.

METHODS

Male Lewis rat intestines were used to generate decellularized scaffolds. Patch or tubular grafts were prepared from the decellularized intestine and transplanted into the rat intestine orthotopically. Histological analysis of the decellularized intestine was performed up to 12 wk after transplantation.

RESULTS

Histological examination revealed abundant vascularization into the decellularized patch graft 1 wk after transplantation. Muscular and nervous components, as well as cryptogenesis, were observed in the decellularized patch graft 2 wk after transplantation. Sixteen of the 18 rats survived with normal intake of food and water after the decellularized tubular graft transplantation. Compared with silicone tube grafts, the decellularized tubular grafts significantly promoted the infiltration and growth of intestinal components including the mucosa, muscular layer, and nerve plexus from the recipients. Circular and longitudinal muscle with a well-developed myenteric plexus was regenerated, and intestinal motility was confirmed in the decellularized tubular graft 12 wk after transplantation.

CONCLUSIONS

Orthotopic transplantation of decellularized intestine enhanced the reconstruction of the well-organized tubular small intestine with an enteric nervous system in vivo. Our method using a decellularized scaffold represents a promising approach toward whole-intestine engineering and provides a therapeutic alternative for the irreversible intestinal failure.

Perfusion-Based Recellularization of Rat Livers with Islets of Langerhans

Purpose

Artificial organs might serve as alternative solutions for whole organ transplantation. Decellularization of a liver provides a non-immunogenic matrix with the advantage of three afferent systems, the portal vein, the hepatic artery and the bile duct. This study aims to evaluate the recellularization of rat livers with islets of Langerhans via the bile duct and the portal vein for the comparison of different perfusion routes.

Methods

Rat livers were decellularized in a pressure-controlled perfusion manner and repopulated with intact isolated islets of Langerhans via either the portal vein or the bile duct.

Results

Repopulation via the portal vein showed islet clusters stuck within the vascular system demonstrated by ellipsoid borders of thick reticular tissue around the islet cluster in Azan staining. After recellularization via the bile duct, islets were distributed close to the vessels within the parenchymal space and without a surrounding reticular layer. Large clusters of islets had a diameter of up to 1000 µm without clear shapes.

Conclusion

We demonstrated the bile duct to be superior to the portal vein for repopulation of a decellularized rat liver with islets of Langerhans. This technique may serve as a bioengineering platform to generate an implantable and functional endocrine neo-pancreas and provide scaffolds with the anatomic benefit of three afferent systems to facilitate co-population of cells.

Can Heart Valve Decellularization Be Standardized? A Review of the Parameters Used for the Quality Control of Decellularization Processes

When a tissue or an organ is considered, the attention inevitably falls on the complex and delicate mechanisms regulating the correct interaction of billions of cells that populate it. However, the most critical component for the functionality of specific tissue or organ is not the cell, but the cell-secreted three-dimensional structure known as the extracellular matrix (ECM). Without the presence of an adequate ECM, there would be no optimal support and stimuli for the cellular component to replicate, communicate and interact properly, thus compromising cell dynamics and behaviour and contributing to the loss of tissue-specific cellular phenotype and functions. The limitations of the current bioprosthetic implantable medical devices have led researchers to explore tissue engineering constructs, predominantly using animal tissues as a potentially unlimited source of materials. The high homology of the protein sequences that compose the mammalian ECM, can be exploited to convert a soft animal tissue into a human autologous functional and long-lasting prosthesis ensuring the viability of the cells and maintaining the proper biomechanical function. Decellularization has been shown to be a highly promising technique to generate tissue-specific ECM-derived products for multiple applications, although it might comprise very complex processes that involve the simultaneous use of chemical, biochemical, physical and enzymatic protocols. Several different approaches have been reported in the literature for the treatment of bone, cartilage, adipose, dermal, neural and cardiovascular tissues, as well as skeletal muscle, tendons and gastrointestinal tract matrices. However, most of these reports refer to experimental data. This paper reviews the most common and latest decellularization approaches that have been adopted in cardiovascular tissue engineering. The efficacy of cells removal was specifically reviewed and discussed, together with the parameters that could be used as quality control markers for the evaluation of the effectiveness of decellularization and tissue biocompatibility. The purpose was to provide a panel of parameters that can be shared and taken into consideration by the scientific community to achieve more efficient, comparable, and reliable experimental research results and a faster technology transfer to the market.

Matrisome provides a supportive microenvironment for oral squamous cell carcinoma progression

Oral squamous cell carcinoma (OSCC) is a common pernicious tumor in the head and neck regions. However, the function of tumor extracellular matrix (ECM) has not been elucidated. A tissue engineering method was applied for remodeling ECM through decellularization. The cellular components were removed, and the biological composition was mostly preserved. Proteomics was performed to analyze the characterization between normal and tumor ECM. According to LC-MS/MS results, 26 proteins just showed in tumor ECM, and 14 proteins only showed in late-stage tumor ECM. KEGG pathway analysis showed that most variant proteins were linked to metabolic regulation and tumor immunity (such as SCC-Ag1, LOX). To affirm the influence of tumor ECM on the progression of OSCC, tumor cells and macrophages were co-cultured with ECM scaffold. Marked differences in proliferation, apoptosis, and migration of OSCC cells were observed between tumor and normal ECM. Tumor ECM polarized macrophages towards an anti-inflammatory phenotype (higher IL-10 and CD68, and relatively lower CD86 and IL1-β). Collectively, these findings suggest that tumor ECM served as a permissive role in OSCC progression. SIGNIFICANCE: The variation between OSCC ECM and normal ECM confirm tumor ECM plays a significant role in OSCC deterioration, which is conducive to exploring the occurrence and progression mechanisms of OSCC, and further improving the curative effect of this disease.

Exploring Insulin Production Following Alveolar Islet Transplantation (AIT)

Recent studies have demonstrated the feasibility of islet implantation into the alveoli. However, until today, there are no data on islet behavior and morphology at their transplant site. This study is the first to investigate islet distribution as well insulin production at the implant site. Using an ex vivo postmortem swine model, porcine pancreatic islets were isolated and aerosolized into the lung using an endoscopic spray-catheter. Lung tissue was explanted and bronchial airways were surgically isolated and connected to a perfusor. Correct implantation was confirmed via histology. The purpose of using this new lung perfusion model was to measure static as well as dynamic insulin excretions following glucose stimulation. Alveolar islet implantation was confirmed after aerosolization. Over 82% of islets were correctly implanted into the intra-alveolar space. The medium contact area to the alveolar surface was estimated at 60 +/− 3% of the total islet surface. The new constructed lung perfusion model was technically feasible. Following static glucose stimulation, insulin secretion was detected, and dynamic glucose stimulation revealed a biphasic insulin secretion capacity during perfusion. Our data indicate that islets secrete insulin following implantation into the alveoli and display an adapted response to dynamic changes in glucose. These preliminary results are encouraging and mark a first step toward endoscopically assisted islet implantation in the lung.

3D bioprinting of stem cell-laden cardiac patch: A promising alternative for myocardial repair

Stem cell-laden three-dimensional (3D) bioprinted cardiac patches offer an alternative and promising therapeutic and regenerative approach for ischemic cardiomyopathy by reversing scar formation and promoting myocardial regeneration. Numerous studies have reported using either multipotent or pluripotent stem cells or their combination for 3D bioprinting of a cardiac patch with the sole aim of restoring cardiac function by faithfully rejuvenating the cardiomyocytes and associated vasculatures that are lost to myocardial infarction. While many studies have demonstrated success in mimicking cardiomyocytes' behavior, improving cardiac function and providing new hope for regenerating heart post-myocardial infarction, some others have reported contradicting data in apparent ways. Nonetheless, all investigators in the field are speed racing toward determining a potential strategy to effectively treat losses due to myocardial infarction. This review discusses various types of candidate stem cells that possess cardiac regenerative potential, elucidating their applications and limitations. We also brief the challenges of and an update on the implementation of the state-of-the-art 3D bioprinting approach to fabricate cardiac patches and highlight different strategies to implement vascularization and augment cardiac functional properties with respect to electrophysiological similarities to native tissue.

Islet Transplantation in the Lung via Endoscopic Aerosolization: Investigation of Feasibility, Islet Cluster Cell Vitality, and Structural Integrity

Aerosolized drug delivery has recently attracted much attention as a possible new tool for the delivery of complex nanoparticles. This study aims to investigate whether catheter-based aerosolization of islets via endobronchial systems is a feasible option in islet transplantation. Besides investigating the feasibility of islet aerosolization, we also examined cluster cell vitality and structural integrity of the islets following aerosolization. Using an ex vivo postmortem swine model, porcine pancreatic islets were isolated and aerosolized with an endoscopic spray catheter. Following aerosolization, islet cell vitality and function were assessed via Calcein AM and propidium iodide as well as insulin production after glucose exposure. In the final step, the overall feasibility of the procedure and structural integrity of cells were analyzed and evaluated with respect to clinical applicability. No significant difference was detected in the viability of control islets (90.67 ± 2.19) vs aerosolized islets (90.68 ± 1.20). Similarly, there was no significant difference in control islets (1.62 ± 0.086) vs aerosolized islets (1.42 ± 0.11) regarding insulin release after stimulation. Indocyanine green marked islets were transplanted into the lung without major difficulty. Histological analysis confirmed retained structural integrity and predominant location in the alveolar cavity. Our ex vivo data suggest that catheter-based aerosolized islet cell delivery is a promising tool for the application of cell clusters. According to our data, islet cell clusters delivery is feasible from a mechanical and physical perspective. Moreover, cell vitality and structural integrity remain largely unaffected following aerosolization. These preliminary results are encouraging and represent a first step toward endoscopically assisted islet cell implantation in the lung.

Assembly and Function of a Bioengineered Human Liver for Transplantation Generated Solely from Induced Pluripotent Stem Cells

The availability of an autologous transplantable auxiliary liver would dramatically affect the treatment of liver disease. Assembly and function in vivo of a bioengineered human liver derived from induced pluripotent stem cells (iPSCs) has not been previously described. By improving methods for liver decellularization, recellularization, and differentiation of different liver cellular lineages of human iPSCs in an organ-like environment, we generated functional engineered human mini livers and performed transplantation in a rat model. Whereas previous studies recellularized liver scaffolds largely with rodent hepatocytes, we repopulated not only the parenchyma with human iPSC-hepatocytes but also the vascular system with human iPS-endothelial cells, and the bile duct network with human iPSC-biliary epithelial cells. The regenerated human iPSC-derived mini liver containing multiple cell types was tested in vivo and remained functional for 4 days after auxiliary liver transplantation in immunocompromised, engineered (IL2rg^-/-) rats.

Orthotopic Transplantation of Human Bioartificial Lung Grafts in a Porcine Model: A Feasibility Study

Lung transplantation is the only treatment for end-stage lung disease; however, donor organ shortage and intense immunosuppression limit its broad clinical impact. Bioengineering of lungs with patient-derived cells could overcome these problems. We created bioartificial lungs by seeding human-derived cells onto porcine lung matrices and performed orthotopic transplantation to assess feasibility and in vivo function. Porcine decellularized lung scaffolds were seeded with human airway epithelial cells and human umbilical vein endothelial cells. Following in vitro culture, the bioartificial lungs were orthotopically transplanted into porcine recipients with planned 1-day survival (n = 3). Lungs were assessed with histology and in vivo function. Orthotopic transplantation of cadaveric lungs was performed as control. Engraftment of endothelial and epithelial cells in the grafts were histologically demonstrated. Technically successful orthotopic anastomoses of the vasculatures and airway were achieved in all animals. Perfusion and ventilation of the lung grafts were confirmed intraoperatively. The gas exchange function was evident immediately after transplantation; PO₂ gradient between pulmonary artery and vein were 178 ± 153 mm Hg in the bioartificial lung group and 183 ± 117 mm Hg in the control group. At time of evaluation 24 hours after reperfusion, the pulmonary arteries were found to be occluded with thrombus in all bioartificial lungs. Engineering and orthotopic transplantation of bioartificial lungs with human cells were technically feasible in a porcine model. Early gas exchange function was evident. Further progress in optimizing recellularization and maturation of the grafts will be necessary for sustained perfusability and function.

Vascular reconstruction: A major challenge in developing a functional whole solid organ graft from decellularized organs

Bioengineering a functional organ holds great potential to overcome the current gap between the organ need and shortage of available organs. Whole organ decellularization allows the removal of cells from large-scale organs, leaving behind extracellular matrices containing different growth factors, structural proteins, and a vascular network with a bare surface. Successful application of decellularized tissues as transplantable organs is hampered by the inability to completely reline the vasculature by endothelial cells (ECs), leading to blood coagulation, loss of vascular patency, and subsequent death of reseeded cells. Therefore, an intact, continuous layer of endothelium is essential to maintain proper functioning of the vascular system, which includes the transfer of nutrients to surrounding tissues and protecting other types of cells from shear stress. Here, we aimed to summarize the available cell sources that can be used for reendothelialization in addition to different trials performed by researchers to reconstruct vascularization of decellularized solid organs. Additionally, different techniques for enhancing reendothelialization and the methods used for evaluating reendothelialization efficiency along with the future prospective applications of this field are discussed. STATEMENT OF SIGNIFICANCE: Despite the great progress in whole organ decellularization, reconstruction of vasculature within the engineered constructs is still a major roadblock. Reconstructed endothelium acts as a multifunctional barrier of vessels, which can reduce thrombosis and help delivering of oxygen and nutrients throughout the whole organ. Successful reendothelialization can be achieved through reseeding of appropriate cell types on the naked vasculature with or without modification of its surface. Here, we present the current research milestones that so far established to reconstruct the vascular network in addition to the methods used for evaluating the efficiency of reendotheilization. Thus, this review is quite significant and will aid the researchers to know where we stand toward biofabricating a transplantable organ from decellularizd extracellular matrix.

Therapeutic targets for liver regeneration after acute severe injury: a preclinical overview

Introduction: Liver transplantation is the only viable treatment with a proven survival benefit for acute liver failure (ALF). Donor organ shortage is, however, a major hurdle; hence, alternative approaches that enable liver regeneration and target acute severe hepatocellular damage are necessary.Areas covered: This article sheds light on therapeutic targets for liver regeneration and considers their therapeutic potential. ALF following extensive hepatocyte damage and small-for-size syndrome (SFSS) are illuminated for the reader while the molecular mechanisms of liver regeneration are assessed in accordance with relevant therapeutic strategies. Furthermore, liver background parameters and predictive biomarkers that might associate with liver regeneration are reviewed.Expert opinion: There are established and novel experimental strategies for liver regeneration to prevent ALF resulting from SFSS. Granulocyte-colony stimulating factor (G-CSF) is a promising agent targeting liver regeneration after acute severe injury. Autophagy and hepatocyte senescence represent attractive new targets for liver regeneration in acute severe hepatic injury. Liver support strategies, including tissue engineering, constitute novel regenerative means; the success of this is dependent on stem cell research advances. However, there is no firm clinical evidence that these supportive strategies may alleviate hepatocellular damage until liver transplantation becomes available or successful self-liver regeneration occurs.

Characterization of chelator-mediated recovery of pancreatic islets from barium-stabilized alginate microcapsules

INTRODUCTION

Islet recovery from within alginate-based microcapsules is necessary for certain analytical assays like flow cytometry; however, this technology has not been widely characterized. In this study, we explore the ability of EDTA, EGTA, and sodium citrate to induce reverse alginate polymerization via chelation and assess the toxicity of each chelator on pancreatic islets.

METHODS

EDTA, EGTA, and sodium citrate were used to dissolve single-layered Ba²⁺ alginate encapsulated islets and the rate of capsule breakdown calculated from analysis of imaging data. The effect of chelator exposure on islet viability and recovery was assessed using flow cytometry, while glucose-stimulated insulin release (GSIR) assay was used to measure effects on islet function.

RESULTS

EGTA demonstrated the most rapid microcapsule dissolving rate followed by EDTA and sodium citrate. Islet recovery was significantly better when encapsulated islets were treated with EDTA than EGTA and Na⁺ citrate. A decrease in viability and increase in apoptotic cells were observed when encapsulated islets were treated with Na⁺ citrate compared to islets treated with EDTA and EGTA. Islets treated with EDTA and EGTA demonstrated comparable stimulation index values to non-treated control. Conversely, islets treated with Na⁺ citrate exhibited significantly decreased SI values compared to control. All chelator groups showed significantly lower insulin secretion than non-treated islets.

CONCLUSION

Islet recovery from alginate microcapsule is possible using common chelators like Na⁺ citrate, EDTA, and EGTA. Chelation of encapsulated islets using EDTA demonstrated the most efficient dissolving capabilities with the least toxicity toward islet recovery and health.

Mesenchymal stem/stromal cell secretome for lung regeneration: The long way through "pharmaceuticalization" for the best formulation

Pulmonary acute and chronic diseases, such as chronic obstructive pulmonary disease, pulmonary fibrosis and pulmonary hypertension, are considered to be major health issues worldwide. Cellular therapies with Mesenchymal Stem Cells (MSCs) offer a new therapeutic approach for chronic and acute lung diseases related to their anti-inflammatory, immunomodulatory, regenerative, pro-angiogenic and anti-fibrotic properties. Such therapeutic effects can be attributed to MSC-secretome, made of free soluble proteins and extracellular vesicles (EVs). This review summarizes the recent findings related to the efficacy and safety of MSC-derived products in pre-clinical models of lung diseases, pointing out the biologically active substances contained into MSC-secretome and their mechanisms involved in tissue regeneration. A perspective view is then provided about the missing steps required for the secretome "pharmaceuticalization" into a high quality, safe and effective medicinal product, as well as the formulation strategies required for EV non-invasive route of administration, such as inhalation.

Carboxymethyl kappa carrageenan-modified decellularized small-diameter vascular grafts improving thromboresistance properties

The development of decellularized small-diameter vascular grafts is a potential solution for patients requiring vascular reconstructive procedures. However, there is a limitation for acellular scaffolds due to incomplete recellularization and exposure of extracellular matrix components to whole blood resulting in platelet adhesion. To address this issue, a perfusion decellularization method was developed using a custom-designed set up which completely removed cell nuclei and preserved three-dimensional structure and mechanical properties of native tissue (sheep carotid arteries). Afterwards, carboxymethyl kappa carrageenan (CKC) was introduced as a novel anticoagulant in vascular tissue engineering which can inhibit thrombosis formation. The method enabled uniform immobilization of CKC on decellularized arteries as a result of interaction between amine functional groups of decellularized arteries and carboxyl groups of CKC. The CKC modified graft significantly reduced platelet adhesion from 44.53 ± 2.05% (control) to 19.57 ± 1.37% (modified) and supported endothelial cells viability, proliferation, and nitric oxide production. Overall, the novel CKC modified scaffold provides a promising solution for thrombosis formation of small-diameter vessels and could be a potent graft for future in vivo applications in vascular bypass procedures. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1690-1701, 2019.

Fabrication of Tongue Extracellular Matrix and Reconstitution of Tongue Squamous Cell Carcinoma In Vitro

In order to construct an effective and realistic model for tongue squamous cell carcinoma (TSCC) in vitro, the methods were created to produce decellularized tongue extracellular matrix (TEM) which provides functional scaffolds for TSCC construction. TEM provides an in vitro niche for cell growth, differentiation, and cell migration. The microstructures of native extracellular matrix (ECM) and biochemical compositions retained in the decellularized matrix provide tissue-specific niches for anchoring cells. The fabrication of TEM can be realized by deoxyribonuclease (DNase) digestion accompanied with a serious of organic or inorganic pretreatment. This protocol is easy to operate and ensures high efficiency for the decellularization. The TEM showed favorable cytocompatibility for TSCC cells under static or stirred culture conditions, which enables the construction of the TSCC model. A self-made bioreactor was also used for the persistent stirred condition for cell culture. Reconstructed TSCC using TEM showed the characteristics and properties resembling clinical TSCC histopathology, suggesting the potential in TSCC research.

Evaluating the angiogenic potential of a novel temperature-sensitive gel scaffold derived from porcine skeletal muscle tissue

Our previous study fabricated decellularized porcine muscle tissues (DPMTs) and demonstrated that DPMTs with few cell residues possess highly preserved protein components and good biocompatibility. In the physical state, skeletal muscle equips an abundant vascular network due to the vast demand of energy from aerobic metabolism. Vascular bioactive factors which are rich in skeletal muscle tissues may contribute to the angiogenic effect of DPMTs. However, implanting DPMTs in vivo in a less invasive way is unfeasible. Hence, the purpose of this study was to fabricate DPMTs into hydrogel and investigate the effects of DPMT gel on promoting neovessel formation in vitro and in vivo. The results demonstrated that the surface topographies of the DPMT gel were looser and more homogeneous than the DPMTs. The rates of retained VEGF, bFGF, and PDGF-BB in DPMT gel were almost half of the corresponding content in fresh skeletal muscle tissues. Human umbilical endothelial cells displayed better proliferation ability and enhanced the formation of neovascular loops when seeded on DPMT gel compared to small intestinal submucosa gels at the same concentration of 2% (W/V). Furthermore, the increased neovessel formation was detected after subcutaneous injection of DPMT gel. Taken together, these findings suggested that DPMT gel may possess the potential of promoting neovascular formation.

Establishment of practical recellularized liver graft for blood perfusion using primary rat hepatocytes and liver sinusoidal endothelial cells

Tissue decellularization produces a three-dimensional scaffold that can be used to fabricate functional liver grafts following recellularization. Inappropriate cell distribution and clotting during blood perfusion hinder the practical use of recellularized livers. Here we aimed to establish a seeding method for the optimal distribution of parenchymal and endothelial cells, and to evaluate the effect of liver sinusoidal endothelial cells (LSECs) in the decellularized liver. Primary rat hepatocytes and LSECs were seeded into decellularized whole-liver scaffolds via the biliary duct and portal vein, respectively. Biliary duct seeding provided appropriate hepatocyte distribution into the parenchymal space, and portal vein-seeded LSECs simultaneously lined the portal lumen, thereby maintaining function and morphology. Hepatocytes co-seeded with LSECs retained their function compared with those seeded alone. Platelet deposition was significantly decreased and hepatocyte viability was maintained in the co-seeded group after extracorporeal blood perfusion. In conclusion, our seeding method provided optimal cell distribution into the parenchyma and vasculature according to the three-dimensional structure of the decellularized liver. LSECs maintained hepatic function, and supported hepatocyte viability under blood perfusion in the engineered liver graft owing to their antithrombogenicity. This recellularization procedure could help produce practical liver grafts with blood perfusion.

Reconstruction of structure and function in tissue engineering of solid organs: Toward simulation of natural development based on decellularization

Failure of solid organs, such as the heart, liver, and kidney, remains a major cause of the world's mortality due to critical shortage of donor organs. Tissue engineering, which uses elements including cells, scaffolds, and growth factors to fabricate functional organs in vitro, is a promising strategy to mitigate the scarcity of transplantable organs. Within recent years, different construction strategies that guide the combination of tissue engineering elements have been applied in solid organ tissue engineering and have achieved much progress. Most attractively, construction strategy based on whole-organ decellularization has become a popular and promising approach, because the overall structure of extracellular matrix can be well preserved. However, despite the preservation of whole structure, the current constructs derived from decellularization-based strategy still perform partial functions of solid organs, due to several challenges, including preservation of functional extracellular matrix structure, implementation of functional recellularization, formation of functional vascular network, and realization of long-term functional integration. This review overviews the status quo of solid organ tissue engineering, including both advances and challenges. We have also put forward a few techniques with potential to solve the challenges, mainly focusing on decellularization-based construction strategy. We propose that the primary concept for constructing tissue-engineered solid organs is fabricating functional organs based on intact structure via simulating the natural development and regeneration processes.

The rat pancreatic body tail as a source of a novel extracellular matrix scaffold for endocrine pancreas bioengineering

Background

Regenerative medicine and tissue engineering are promising approaches for organ transplantation. Extracellular matrix (ECM) based scaffolds obtained through the decellularization of natural organs have become the preferred platform for organ bioengineering. In the field of pancreas bioengineering, acellular scaffolds from different animals approximate the biochemical, spatial and vascular relationships of the native extracellular matrix and have been proven to be a good platform for recellularization and in vitro culture. However, artificial endocrine pancreases based on these whole pancreatic scaffolds have a critical flaw, specifically their difficult in vivo transplantation, and connecting their vessels to the recipient is a major limitation in the development of pancreatic tissue engineering. In this study, we focus on preparing a novel acellular extracellular matrix scaffold derived from the rat pancreatic body tail (pan-body-tail ECM scaffold).

Results

Several analyses confirmed that our protocol effectively removes cellular material while preserving ECM proteins and the native vascular tree. DNA quantification demonstrated an obvious reduction of DNA compared with that of the natural organ (from 931.9 ± 267.8 to 11.7 ± 3.6 ng/mg, P < 0.001); the retention of the sGAG in the decellularized pancreas (0.878 ± 0.37) showed no significant difference from the natural pancreas (0.819 ± 0.1) (P > 0.05). After transplanted with the recellularized pancreas, fasting glucose levels declined to 9.08 ± 2.4 mmol/l within 2 h of the operation, and 8 h later, they had decreased to 4.7 ± 1.8 mmol/l (P < 0.05).

Conclusions

The current study describes a novel pancreatic ECM scaffold prepared from the rat pancreatic body tail via perfusion through the left gastric artery. We further showed the pioneering possibility of in vivo circulation-connected transplantation of a recellularized pancreas based on this novel scaffold. By providing such a promising pancreatic ECM scaffold, the present study might represent a key improvement and have a positive impact on endocrine pancreas bioengineering.

Bioengineered Lungs: A Challenge and An Opportunity

Lung biofabrication is a new tissue engineering and regenerative development aimed at providing organs for potential use in transplantation. Lung biofabrication is based on seeding cells into an acellular organ scaffold and on culturing them in an especial purpose bioreactor. The acellular lung scaffold is obtained by decellularizing a non-transplantable donor lung by means of conventional procedures based on application of physical, enzymatic and detergent agents. To avoid immune recipient's rejection of the transplanted bioengineered lung, autologous bone marrow/adipose tissue-derived mesenchymal stem cells, lung progenitor cells or induced pluripotent stem cells are used for biofabricating the bioengineered lung. The bioreactor applies circulatory perfusion and mechanical ventilation with physiological parameters to the lung during biofabrication. These physical stimuli to the organ are translated into the stem cell local microenvironment - e.g. shear stress and cyclic stretch - so that cells sense the physiological conditions in normally functioning mature lungs. After seminal proof of concept in a rodent model was published in 2010, the hypothesis that lungs can be biofabricated is accepted and intense research efforts are being devoted to the topic. The current experimental evidence obtained so far in animal tests and in ex vivo human bioengineered lungs suggests that the date of first clinical tests, although not immediate, is coming. Lung bioengineering is a disrupting concept that poses a challenge for improving our basic science knowledge and is also an opportunity for facilitating lung transplantation in future clinical translation.

Stem cells and genome editing: approaches to tissue regeneration and regenerative medicine

Understanding the basis of regeneration of each tissue and organ, and incorporating this knowledge into clinical treatments for degenerative tissues and organs in patients, are major goals for researchers in regenerative biology. Here we provide an overview of current work, from high-regeneration animal models, to stem cell-based culture models, transplantation technologies, large-animal chimeric models, and programmable nuclease-based genome-editing technologies. Three-dimensional culture generating organoids, which represents intact tissue/organ identity including cell fate and morphology are getting more general approaches in the fields by taking advantage of embryonic stem cells, induced pluripotent stem cells and adult stem cells. The organoid culture system potentially has profound impact on the field of regenerative medicine. We also emphasize that the large animal model, in particular pig model would be a hope to manufacture humanized organs in in vivo empty (vacant) niche, which now potentially allows not only appropriate cell fate identity but nearly the same property as human organs in size. Therefore, integrative and collaborative researches across different fields might be critical to the aims needed in clinical trial.

Decellularized tongue tissue as an in vitro model for studying tongue cancer and tongue regeneration

The decellularization of tissues or organs provides an efficient strategy for preparing functional scaffolds for tissue engineering. The microstructures of native extracellular matrices and biochemical compositions retained in the decellularized matrices provide tissue-specific microenvironments for anchoring cells. Here, we report the tongue extracellular matrix (TEM), which showed favorable cytocompatibility for normal tongue-derived cells and tongue squamous cell carcinoma (TSCC) cells under static or stirring culture conditions. Our results show that TEM retained tongue-specific integrated microstructures and abundant matrix components, which offer mechanical support and spatial signals for regulating cell behavior and function. Reconstructed TSCC by TEM presented characteristics resembling clinical TSCC histopathology, suggesting the possibility for TSCC research. In addition, TEM might be capable of guiding tongue-derived cells to the niche, benefiting cell survival, proliferation and differentiation.

STATEMENT OF SIGNIFICANCE

In this study, we prepared decellularized tongue extracellular matrix (TEM) and evaluated the possibility for tongue squamous cell carcinoma (TSCC) research and tongue regeneration. TEM has six irreplaceable advantages: (1) tongue-specific intricate structures of TEM, which offer mechanical support for the cells; (2) abundant matrix components and spatial signals benefiting for cell attachment, survival, differentiation, and long-term viability of the highly functional phenotypes of tongue cells or TSCC cells; (3) reconstructed TSCC by TEM exhibited tumor heterogeneity, extremely resembling clinical TSCC histopathology; (4) ideal model to evaluate TSCC movement mode; (5) guiding tongue-derived cells to the site-appropriate niche; and (6) the possibility for static or stirred cell culture. These properties might be considered in TSCC research or tongue regeneration.

Experimental Evaluation of Kidney Regeneration by Organ Scaffold Recellularization

The rising number of patients needing renal replacement therapy, alongside the significant clinical and economic limitations of current therapies, creates an imperative need for new strategies to treat kidney diseases. Kidney bioengineering through the production of acellular scaffolds and recellularization with stem cells is one potential strategy. While protocols for obtaining organ scaffolds have been developed successfully, scaffold recellularization is more challenging. We evaluated the potential of in vivo and in vitro kidney scaffold recellularization procedures. Our results show that acellular scaffolds implanted in rats cannot be repopulated with host cells, and in vitro recellularization is necessary. However, we obtained very limited and inconsistent cell seeding when using different infusion protocols, regardless of injection site. We also obtained experimental and theoretical data indicating that uniform cell delivery into the kidney scaffolds cannot be obtained using these infusion protocols, due to the permeability of the extracellular matrix of the scaffold. Our results highlight the major physical barriers that limit in vitro recellularization of acellular kidney scaffolds and the obstacles that must be investigated to effectively advance this strategy for regenerative medicine.

Efficient recellularisation of decellularised whole-liver grafts using biliary tree and foetal hepatocytes

A whole-organ regeneration approach, using a decellularised xenogeneic liver as a scaffold for the construction of a transplantable liver was recently reported. Deriving suitable scaffolds was the first step towards clinical application; however, effective recellularisation remains to be achieved. This report presents a strategy for the improvement of the recellularisation process, using novel cell-seeding technique and cell source. We evaluated recellularised liver grafts repopulated through the portal vein or the biliary duct with mice adult hepatocytes or E14.5 foetal hepatocytes. More than 80% of the cells seeded through the biliary tree entered the parenchyma beyond the ductule-lining matrix barrier and distributed throughout the liver lobule. In contrast, about 20% of the cells seeded through the portal tree entered the parenchyma. The gene expression levels of foetal hepatocyte albumin, glucose 6-phosphatase, transferrin, cytokeratin 19, and gamma-glutamyl transpeptidase were increased in three-dimensional cultures in the native liver-derived scaffolds, and the activation of liver detoxification enzymes and formation of biliary duct-like structures were supported. The metabolic functions of liver grafts recellularised with different cell types were similar. These results suggest that biliary tree cell-seeding approach is promising, and that liver progenitor cells represent a good cell source candidate.

Human Organotypic Lung Tumor Models: Suitable For Preclinical 18F-FDG PET-Imaging

Development of predictable in vitro tumor models is a challenging task due to the enormous complexity of tumors in vivo. The closer the resemblance of these models to human tumor characteristics, the more suitable they are for drug-development and –testing. In the present study, we generated a complex 3D lung tumor test system based on acellular rat lungs. A decellularization protocol was established preserving the architecture, important ECM components and the basement membrane of the lung. Human lung tumor cells cultured on the scaffold formed cluster and exhibited an up-regulation of the carcinoma-associated marker mucin1 as well as a reduced proliferation rate compared to respective 2D culture. Additionally, employing functional imaging with 2-deoxy-2-[¹⁸F]fluoro-D-glucose positron emission tomography (FDG-PET) these tumor cell cluster could be detected and tracked over time. This approach allowed monitoring of a targeted tyrosine kinase inhibitor treatment in the in vitro lung tumor model non-destructively. Surprisingly, FDG-PET assessment of single tumor cell cluster on the same scaffold exhibited differences in their response to therapy, indicating heterogeneity in the lung tumor model. In conclusion, our complex lung tumor test system features important characteristics of tumors and its microenvironment and allows monitoring of tumor growth and -metabolism in combination with functional imaging. In longitudinal studies, new therapeutic approaches and their long-term effects can be evaluated to adapt treatment regimes in future.

The Human Pancreas as a Source of Protolerogenic Extracellular Matrix Scaffold for a New-generation Bioartificial Endocrine Pancreas

OBJECTIVES

Our study aims at producing acellular extracellular matrix scaffolds from the human pancreas (hpaECMs) as a first critical step toward the production of a new-generation, fully human-derived bioartificial endocrine pancreas. In this bioartificial endocrine pancreas, the hardware will be represented by hpaECMs, whereas the software will consist in the cellular compartment generated from patient's own cells.

BACKGROUND

Extracellular matrix (ECM)-based scaffolds obtained through the decellularization of native organs have become the favored platform in the field of complex organ bioengineering. However, the paradigm is now switching from the porcine to the human model.

METHODS

To achieve our goal, human pancreata were decellularized with Triton-based solution and thoroughly characterized. Primary endpoints were complete cell and DNA clearance, preservation of ECM components, growth factors and stiffness, ability to induce angiogenesis, conservation of the framework of the innate vasculature, and immunogenicity. Secondary endpoint was hpaECMs' ability to sustain growth and function of human islet and human primary pancreatic endothelial cells.

RESULTS

Results show that hpaECMs can be successfully and consistently produced from human pancreata and maintain their innate molecular and spatial framework and stiffness, and vital growth factors. Importantly, hpaECMs inhibit human naïve CD4 T-cell expansion in response to polyclonal stimuli by inducing their apoptosis and promoting their conversion into regulatory T cells. hpaECMs are cytocompatible and supportive of representative pancreatic cell types.

DISCUSSION

We, therefore, conclude that hpaECMs has the potential to become an ideal platform for investigations aiming at the manufacturing of a regenerative medicine-inspired bioartificial endocrine pancreas.

Liver-Regenerative Transplantation: Regrow and Reset

Liver transplantation, either a partial liver from a living or deceased donor or a whole liver from a deceased donor, is the only curative therapy for severe end-stage liver disease. Only one-third of those on the liver transplant waiting list will be transplanted, and the demand for livers is projected to increase 23% in the next 20 years. Consequently, organ availability is an absolute constraint on the number of liver transplants that can be performed. Regenerative therapies aim to enhance liver tissue repair and regeneration by any means available (cell repopulation, tissue engineering, biomaterials, proteins, small molecules, and genes). Recent experimental work suggests that liver repopulation and engineered liver tissue are best suited to the task if an unlimited availability of functional induced pluripotent stem (iPS)-derived liver cells can be achieved. The derivation of iPS cells by reprogramming cell fate has opened up new lines of investigation, for instance, the generation of iPS-derived xenogeneic organs or the possibility of simply inducing the liver to reprogram its own hepatocyte function after injury. We reviewed current knowledge about liver repopulation, generation of engineered livers and reprogramming of liver function. We also discussed the numerous barriers that have to be overcome for clinical implementation.

New advances in liver decellularization and recellularization: innovative and critical technologies

Techniques for producing decellularized scaffolds for use in liver tissue engineering are emerging as promising methods for tissue reconstruction. In this article, the authors present an overview of liver decellularization methods developed and applied in recent years. These include the widespread use of various perfusion methods for the generation of a 3D scaffold, which may function as a template for either cell recellularization or direct biological application. The authors evaluate methods for scaffold production and explore some factors that may affect the decellularization process. In addition to tissue engineering, this overview includes a description of other potential applications for a decellularized liver scaffold. The authors also introduce the concept of fabrication of fragile biomaterial architecture and finally review the cell types applied to liver scaffold engineering.

Self-assembling peptide nanofibers promoting cell adhesion and differentiation

There is an increasing need for the development of functional artificial extracellular matrices (ECMs) for tissue engineering. Recently, we have successfully designed a self-assembling peptide, named E1Y9, to construct functional ECMs. We describe here an enhancement of abilities of E1Y9 materials to promote cell adhesion and differentiation, using functional peptide sequences derived from natural extracellular matrix proteins. We designed functionalized self-assembling peptides, RGDS-conjugated E1Y9 (E1Y9-RGDS) and IKVAV-conjugated E1Y9 (E1Y9-IKVAV). E1Y9-RGDS and E1Y9-IKVAV formed peptide nanofibers in a similar manner to E1Y9, with β-sheet secondary structures. Surfaces coated with peptide nanofibers displayed the higher bioactivities of E1Y9-RGDS for cell adhesion and E1Y9-IKVAV for cell differentiation than those of E1Y9, with the activities being dependent on the concentrations of the functional peptides. These functionalized peptides will be useful for the construction of functional ECMs in cell and tissue engineering.

Freezing/Thawing without Cryoprotectant Damages Native but not Decellularized Porcine Renal Tissue

Whole organ decellularization of porcine renal tissue and recellularization with a patient's own cells would potentially overcome immunorejection, which is one of the most significant problems with allogeneic kidney transplantation. However, there are obstacles to achieving this goal, including preservation of the decellularized extracellular matrix (ECM), identifying the proper cell types, and repopulating the ECM before transplantation. Freezing biological tissue is the best option to avoid spoilage; however, it may damage the structure of the tissue or disrupt cellular membranes through ice crystal formation. Cryoprotectants have been used to repress ice formation during freezing, although cell toxicity can still occur. The effect of freezing/thawing on native (n = 10) and decellularized (n = 10) whole porcine kidneys was studied without using cryoprotectants. Results showed that the elastic modulus of native kidneys was reduced by a factor of 22 (P < 0.0001) by freezing/thawing or decellularization, while the elastic modulus for decellularized ECM was essentially unchanged by the freezing/thawing process (p = 0.0636). Arterial pressure, representative of structural integrity, was also reduced by a factor of 52 (P < 0.0001) after freezing/thawing for native kidneys, compared to a factor of 43 (P < 0.0001) for decellularization and a factor of 4 (P < 0.0001) for freezing/thawing decellularized structures. Both freezing/thawing and decellularization reduced stiffness, but the reductions were not additive. Investigation of the microstructure of frozen/thawed native and decellularized renal tissues showed increased porosity due to cell removal and ice crystal formation. Orcein and Sirius staining showed partial damage to elastic and collagen fibers after freezing/thawing. It was concluded that cellular damage and removal was more responsible for reducing stiffness than fibril destruction. Cell viability and growth were demonstrated on decellularized frozen/thawed and non-frozen samples using human renal cortical tubular epithelial (RCTE) cells over 12 d. No adverse effect on the ability to recellularize after freezing/thawing was observed. It is recommended that porcine kidneys be frozen prior to decellularization to prevent contamination, and after decellularization to prevent protein denaturation. Cryoprotectants may still be necessary, however, during storage and transportation after recellularization.

Advancing biomaterials of human origin for tissue engineering

Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for restoration. In particular, there is increasing interest in separating ECMs into simplified functional domains and/or biopolymeric assemblies so that these components/constituents can be discretely exploited and manipulated for the production of bioscaffolds and new biomimetic biomaterials. Here, following an overview of tissue auto-/allo-transplantation, we discuss the recent trends and advances as well as the challenges and future directions in the evolution and application of human-derived biomaterials for reconstructive surgery and tissue engineering. In particular, we focus on an exploration of the structural, mechanical, biochemical and biological information present in native human tissue for bioengineering applications and to provide inspiration for the design of future biomaterials.

Challenging Regeneration to Transform Medicine

The aging population in the U.S. and other developed countries has led to a large increase in the number of patients suffering from degenerative diseases. Transplantation surgery has been a successful therapeutic option for certain patients; however, the availability of suitable donor organs and tissues significantly limits the number of patients who can benefit from this approach. Regenerative medicine has witnessed numerous recent and spectacular advances, making the repair or replacement of dysfunctional organs and tissues an achievable goal. Public-private partnerships and government policies and incentives would further catalyze the development of universally available donor tissues, resulting in broad medical and economic benefits. This article describes a Regenerative Medicine Grand Challenge that the Alliance for Regenerative Medicine recently shared with the White House's Office of Science and Technology Policy in response to a White House call to action in scientific disciplines suggesting that the development of "universal donor tissues" should be designated as a Regenerative Medicine Grand Challenge. Such a designation would raise national awareness of the potential of regenerative medicine to address the unmet needs of many diseases and would stimulate the scientific partnerships and investments in technology needed to expedite this goal. Here we outline key policy changes and technological challenges that must be addressed to achieve the promise of a major breakthrough in the treatment of degenerative disease. A nationalized effort and commitment to develop universal donor tissues could realize this goal within 10 years and along the way result in significant innovation in manufacturing technologies.

SIGNIFICANCE

Regenerative therapies, in which dysfunctional or degenerating cells, tissues, or organs are repaired or replaced, have the potential to cure chronic degenerative diseases. Such treatments are limited by a shortage of donor organs and tissues and the need for immune suppression to prevent rejection. This article proposes a 21st Century Grand Challenge that would address this significant medical need by coordinating a national effort to convene the multidisciplinary expertise needed to manufacture functional and engraftable cells, tissues, or organs that could be made available to any patient without significant risk of rejection-so-called universal donor tissues.

SDF-1 liposomes promote sustained cell proliferation in mouse diabetic wounds

Chronic skin wounds are a common complication of diabetes. When standard wound care fails to heal such wounds, a promising approach consists of using decellularized matrices and other porous scaffold materials to promote the restoration of skin. Proper revascularization is critical for the efficacy of such materials in regenerative medicine. Stromal cell-derived factor-1 (SDF-1) is a chemokine known to play a key role for angiogenesis in ischemic tissues. Herein we developed nanosized SDF-1 liposomes, which were then incorporated into decellularized dermis scaffolds used for skin wound healing applications. SDF-1 peptide associated with liposomes with an efficiency of 80%, and liposomes were easily dispersed throughout the acellular dermis. Acellular dermis spiked with SDF-1 liposomes exhibited more persistent cell proliferation in the dermis, especially in CD31(+) areas, compared to acellular dermis spiked with free SDF-1, which resulted in increased improved wound closure at day 21, and increased granulation tissue thickness at day 28. SDF-1 liposomes may increase the performance of a variety of decellularized matrices used in tissue engineering.

Procedure for Decellularization of Rat Livers in an Oscillating-pressure Perfusion Device

Decellularization and recellularization of parenchymal organs may enable the generation of functional organs in vitro, and several protocols for rodent liver decellularization have already been published. We aimed to improve the decellularization process by construction of a proprietary perfusion device enabling selective perfusion via the portal vein and/or the hepatic artery. Furthermore, we sought to perform perfusion under oscillating surrounding pressure conditions to improve the homogeneity of decellularization. The homogeneity of perfusion decellularization has been an underestimated factor to date. During decellularization, areas within the organ that are poorly perfused may still contain cells, whereas the extracellular matrix (ECM) in well-perfused areas may already be affected by alkaline detergents. Oscillating pressure changes can mimic the intraabdominal pressure changes that occur during respiration to optimize microperfusion inside the liver. In the study presented here, decellularized rat liver matrices were analyzed by histological staining, DNA content analysis and corrosion casting. Perfusion via the hepatic artery showed more homogenous results than portal venous perfusion did. The application of oscillating pressure conditions improved the effectiveness of perfusion decellularization. Livers perfused via the hepatic artery and under oscillating pressure conditions showed the best results. The presented techniques for liver harvesting, cannulation and perfusion using our proprietary device enable sophisticated perfusion set-ups to improve decellularization and recellularization experiments in rat livers.