Preparation, characterization and optimization of sildenafil citrate loaded PLGA nanoparticles by statistical factorial design

Sildenafil and furosemide nanoparticles as a novel pharmacological treatment for acute renal failure in rats

Hospitalized patients often develop acute renal failure (ARF), which causes severe morbidity and death. This research investigates the potential renoprotective benefits of sildenafil and furosemide in glycerol-induced ARF, and measures kidney function metrics in response to nanoparticle versions of these medications. Inducing ARF is commonly done by injecting 50% glycerol intramuscularly. Rats underwent a 24-h period of dehydration and starvation before slaughter for renal function testing. We investigated urine analysis, markers of oxidative stress, histology of kidney tissue, immunohistochemistry analysis of caspase-3 and interleukin-1 beta (IL-1 β), kidney injury molecule-1 (KIM-1), and neutrophil gelatinase-associated lipocalin (NGAL), which are specific indicators of kidney tissue damage. The results of our study showed that the combination of sildenafil and furosemide, using both traditional and nanoparticle formulations, had a greater protective effect on the kidneys compared to using either drug alone. The recovery of renal tissue indicators, serum markers, and urine markers, which are indicative of organ damage, provides evidence of improvement. This was also indicated by the reduction in KIM-1 and NGAL tubular expression. The immunohistochemistry tests showed that the combination therapy, especially with the nanoforms, greatly improved the damaged cellular changes in the kidneys, as shown by higher levels of caspase-3 and IL-1β. According to the findings, a glycerol-induced rat model demonstrates that sildenafil and furosemide, either alone or in combination, in conventional or nanoparticulate forms, improve ARF dysfunction. The synergistic nanoparticulate compositions show remarkable effectiveness. This observation highlights the possible therapeutic implications for ARF treatment.

Therapeutic potentials and targeting strategies of quercetin on cancer cells: Challenges and future prospects

BACKGROUND

Every cell in the human body is vital because it maintains equilibrium and carries out a variety of tasks, including growth and development. These activities are carried out by a set of instructions carried by many different genes and organized into DNA. It is well recognized that some lifestyle decisions, like using tobacco, alcohol, UV, or multiple sexual partners, might increase one's risk of developing cancer. The advantages of natural products for any health issue are well known, and researchers are making attempts to separate flavonoid-containing substances from plants. Various parts of plants contain a phenolic compound called flavonoid. Quercetin, which belongs to the class of compounds known as flavones with chromone skeletal structure, has anti-cancer activity.

PURPOSE

The study was aimed at investigating the therapeutic action of the flavonoid quercetin on various cancer cells.

METHODS

The phrases quercetin, anti-cancer, nanoparticles, and cell line were used to search the data using online resources such as PubMed, and Google Scholar. Several critical previous studies have been included.

RESULTS

Quercetin inhibits various dysregulated signaling pathways that cause cancer cells to undergo apoptosis to exercise its anticancer effects. Numerous signaling pathways are impacted by quercetin, such as the Hedgehog system, Akt, NF-κB pathway, downregulated mutant p53, JAK/STAT, G1 phase arrest, Wnt/β-Catenin, and MAPK. There are downsides to quercetin, like hydrophobicity, first-pass effect, instability in the gastrointestinal tract, etc., because of which it is not well-established in the pharmaceutical industry. The solution to these drawbacks in the future is using bio-nanomaterials like chitosan, PLGA, liposomes, and silk fibroin as carriers, which can enhance the target specificity of quercetin. The first section of this review covers the specifics of flavonoids and quercetin; the second section covers the anti-cancer activity of quercetin; and the third section explains the drawbacks and conjugation of quercetin with nanoparticles for drug delivery by overcoming quercetin's drawback.

CONCLUSIONS

Overall, this review presented details about quercetin, which is a plant derivative with a promising molecular mechanism of action. They inhibit cancer by various mechanisms with little or no side effects. It is anticipated that plant-based materials will become increasingly relevant in the treatment of cancer.

When income meets faith: the development and application of the Chinese generation Z unconventional religious orientation scale

This study seeks to analyze the psychological construction of Unconventional Religious Orientations and their association with individual income level satisfaction within Generation Z. Generation Z, individuals born between 1995 and 2010, grew up in a socio-cultural context marked by digitization and globalization. This study identifies three key dimensions of Unconventional Religious Orientations: religious spiritual dependence, religious instrumental tendencies, and religious uniqueness identity. By combining rootedness theory, semi-structured interviews, and literature review, we constructed and refined a set of relevant scales. Using exploratory and validation factor analyses (EFA and CFA), we verified the structural validity of the scale. The results of the analyses revealed significant negative correlations between satisfaction with income level and all dimensions of Unconventional Religious Orientation for Generation Z, suggesting that Unconventional Religious Orientation tends to diminish as income satisfaction increases. In addition, the significant positive correlations between these dimensions of religious inclination imply that they may share certain underlying factors in their psychological structure. This study not only successfully developed a set of psychometric instruments for Unconventional Religious Orientations, but also provided a new psychological perspective for understanding the dynamic interaction between economic satisfaction and religious psychological attitudes in Generation Z.

Stability and release mechanism of double emulsification (W1/O/W2) for biodegradable pH-responsive polyhydroxybutyrate/cellulose acetate phthalate microbeads loaded with the water-soluble bioactive compound niacinamide

Microbeads of biodegradable polyhydroxybutyrate (PHB) offer environmental benefits and economic competitiveness. The aim of this study was to encapsulate a water-soluble bioactive compound, niacinamide (NIA), in a pH-responsive natural matrix composed of PHB and cellulose acetate phthalate (CAP) by double emulsification (W1/O/W2) to improve the encapsulation efficiency (%EE) and loading capacity (%LC). PHB was produced in-house by Escherichia coli JM109 pUC19-23119phaCABA-04 without the inducing agent isopropyl β-D-1-thiogalactopyranoside (IPTG). The influences of PHB and polyvinyl alcohol (PVA) concentrations, stirring rate, PHB/CAP ratio and initial NIA concentration on the properties of NIA-loaded pH-responsive microbeads were studied. The NIA-loaded pH-responsive PHB/CAP microbeads exhibited a spherical core-shell structure. The average size of the NIA-loaded pH-responsive microbeads was 1243.3 ± 11.5 μm. The EE and LC were 33.3 ± 0.5 % and 28.5 ± 0.4 %, respectively. The release profiles of NIA showed pH-responsive properties, as 94.2 ± 3.5 % of NIA was released at pH 5.5, whereas 99.3 ± 2.4 % of NIA was released at pH 7.0. The NIA-loaded pH-responsive PHB/CAP microbeads were stable for >90 days at 4 °C under darkness, with NIA remaining at 73.65 ± 1.86 %. A cytotoxicity assay in PSVK1 cells confirmed that the NIA-loaded pH-responsive PHB/CAP microbeads were nontoxic at concentrations lower than 31.3 μg/mL, in accordance with ISO 10993-5.

Controlled delivery of sildenafil by β-Cyclodextrin-decorated sulfur-doped carbon nanodots: a synergistic activation of ROS signaling in tumors overexpressing PDE-5

Fluorescent sulfur- and nitrogen-doped carbon nanodots (CDs) are zero-dimensional nanoparticles that mediate ROS production in cancer cells, displaying inherent anticancer properties. Thus, they have been proposed as nanotheranostic tools useful in image-guided cancer therapy. Here, we try to show that cancerous cells (high PDE-5 expression) receiving sildenafil delivered by CDs-based nanostructures promote positive reinforcement of PDE-5-mediated cell death via the overexpression of genes involved in the production of ROS. We explored the regioselective Huisgen cycloaddition between azide-β-cyclodextrin and CDs-alkyne to synthetize homogeneous nanostructures, named CDs-PEG4-β-Cdx, consisting of CDs functionalized at the surface with β-cyclodextrins capable of including high amount drugs such as sildenafil (>20 % w/w), and releasing them in a controlled manner. We investigated how CDs-PEG4-β-Cdx bearing sildenafil enter cells, enhancing ROS production and cell death specifically in cancer cells overexpressing PDE-5. These nanoplatforms go beyond the bounds of EPR-based nanomedicines in which carriers are conceived as inert vehicles of toxic drugs. Our findings enable the development of clever anticancer nanoplatforms that synergistically combine nanomedicines that perturb the mitochondrial electron transport chain (ROS production) with PDE-5 inhibitors which trigger oxidative stress specifically in cancer cells regardless of their location.

Design, development, in-vitro and in-vivo evaluation of polylactic acid-based multifunctional nanofibrous patches for efficient healing of diabetic wounds

Impaired healing of diabetic ulcers is one of the major complications of diabetic patients due to high susceptibility to microbial infections, impaired lymphianogenesis, edema, and consequently impairing proper healing. This could even lead to much worse complications that include severe gangrene, trauma and finally limb amputation. Therefore, this study aims to develop a multilayered durable nanofibrous wound patch loaded with three promising drugs (phenytoin, sildenafil citrate and simvastatin) each in a separate layer to target a different wound healing phase. Polylactic acid was used for the preparation of the nanofibrous matrix of the wound patch, where each drug was incorporated in a separate layer during the preparation process. Drugs release profiles were studied over 3 weeks. Results showed that both phenytoin and simvastatin were released within 14 days while sildenafil continued till 21 days. Both physicochemical and mechanical characteristics of the patches were fully assessed as well as their biodegradability, swellability, breathability and porosity. Results showed that incorporation of drugs preserved the physicochemical and mechanical properties as well as porosity of the developed nanofibers. In addition, patches were evaluated for their biocompatibility and cell adhesion capability before being tested through in-vivo diabetic wound rat model induced by alloxan for three weeks. In vivo results showed that the patches were successful in inducing proper wound healing in diabetic rat model with overcoming the above-mentioned obstacles within 3 weeks. This was confirmed through assessing wound closure as well as from histopathological studies that showed complete healing with proper cell regeneration and arrangement without forming scars.

The Idiosyncratic Efficacy of Spironolactone-Loaded PLGA Nanoparticles Against Murine Intestinal Schistosomiasis

Background

Schistosomiasis is a chronic debilitating parasitic disease accompanied with severe mortality rates. Although praziquantel (PZQ) acts as the sole drug for the management of this disease, it has many limitations that restrict the use of this treatment approach. Repurposing of spironolactone (SPL) and nanomedicine represents a promising approach to improve anti-schistosomal therapy. We have developed SPL-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) to enhance the solubility, efficacy, and drug delivery and hence decrease the frequency of administration, which is of great clinical value.

Methods

The physico-chemical assessment was performed starting with particle size analysis and confirmed using TEM, FT-IR, DSC, and XRD. The antischistosomal effect of the SPL-loaded PLGA NPs against Schistosoma mansoni (S. mansoni)-induced infection in mice was also estimated.

Results

Our results manifested that the optimized prepared NPs had particle size of 238.00 ± 7.21 nm, and the zeta potential was -19.66 ± 0.98 nm, effective encapsulation 90.43±8.81%. Other physico-chemical features emphasized that nanoparticles were completely encapsulated inside the polymer matrix. The in vitro dissolution studies revealed that SPL-loaded PLGA NPs showed sustained biphasic release pattern and followed Korsmeyer-Peppas kinetics corresponding to Fickian diffusion (n<0.45). The used regimen was efficient against S. mansoni infection and induced significant reduction in spleen, liver indices, and total worm count (ρ<0.05). Besides, when targeting the adult stages, it induced decline in the hepatic egg load and the small intestinal egg load by 57.75% and 54.17%, respectively, when compared to the control group. SPL-loaded PLGA NPs caused extensive damage to adult worms on tegument and suckers, leading to the death of the parasites in less time, plus marked improvement in liver pathology.

Conclusion

Collectively, these findings provided proof-of-evidence that the developed SPL-loaded PLGA NPs could be potentially used as a promising candidate for new antischistosomal drug development.

Fabrication, Optimization, and Evaluation of Paclitaxel and Curcumin Coloaded PLGA Nanoparticles for Improved Antitumor Activity

Codelivery of chemotherapeutic drugs in nanoparticles can enhance the therapeutic effects against tumors. However, their anticancer properties and physiochemical characteristics can be severely influenced by many formulation parameters during the preparation process. It is a complicated development phase to select the optimal parameters for preparation of nanoparticles based on the commonly used one single parameter method, which consumes a lot of money, time, and effort, and sometimes even fails. Therefore, the statistical analysis based on Box-Behnken design (BBD) has attracted much attention in bioengineering fields because it can illustrate the influence of parameters, build mathematical models, and predict the optimal combinational factors in a decreased number of experiments. In this study, we used a three-factor three-level BBD design to optimize the preparation of poly(lactic-co-glycolic acid) (PLGA) nanoparticles coloaded with two anticancer drugs curcumin and paclitaxel (PLGA-CUR-PTX nanoparticles). The surfactant concentration, polymer concentration, and oil-water ratio were selected as independent variables. An optimized model of the formulation for PLGA-CUR-PTX nanoparticles was validated. The optimal nanoparticles possessed a uniform spherical shape, with an average size of 99.94 nm, and the drug encapsulation efficiencies of CUR and PTX were 63.53 and 80.64%, respectively. The drug release from nanoparticles showed a biphasic release behavior, with a release mechanism via diffusion and fundamentally quasi-Fickian diffusion. The optimized nanoparticles demonstrated an enhanced cytotoxicity effect with lower IC₅₀ values to 4T1 and MCF-7 breast cancer cell lines compared to free drugs. In summary, BBD optimization of CUR and PTX coloaded nanoparticles yielded a favorable drug carrier that holds potential as an alternative treatment for anticancer therapy.

Formulation and evaluation of butenafine loaded PLGA-nanoparticulate laden chitosan nano gel

The present research work is designed to prepare and optimize butenafine (BT) loaded poly lactic co glycolic acid (PLGA) nanoparticles (BT-NPs). BT-NPs were prepared by emulsification probe sonication method using PLGA (A), PVA (B) as polymer and stabilizer, respectively. The optimum composition of BT-NPs was selected based on the point prediction method given by the Box Behnken design software. The optimized composition of BT-NPop showed a particle size of 267.21 ± 3.54 nm with an entrapment efficiency of 72.43 ± 3.11%. The optimum composition of BT-NPop was further converted into gel formulation using chitosan as a natural polymer. The prepared topical gel formulation (BT-NPopG) was further evaluated for gel characterization, drug release, permeation study, irritation, and antifungal studies. The prepared BT-NPopG formulation showed optimum pH, viscosity, spreadability, and drug content. The release and permeation study results revealed slow BT release (42.76 ± 2.87%) with significantly enhanced permeation across the egg membrane. The irritation study data showed negligible irritation with a cumulative score of 0.33. The antifungal study results conclude higher activity than marketed as well as pure BT. The overall conclusion of the results revealed BT-NPopG as an ideal delivery system to treat topical fungal infection.

Optimized Taste-Masked Microparticles for Orally Disintegrating Tablets as a Promising Dosage Form for Alzheimer's Disease Patients

The objective of this research was to optimize the tasted-masked microparticles for orally disintegrating tablets containing donepezil hydrochloride using quality risk assessment and design of experiment approaches. The double emulsion solvent evaporation technique using aminoalkyl methacrylate copolymer (AMC) was used to prepare taste-masked microparticles. Factors affecting the quality of the taste-masked microparticles were analyzed using an Ishikawa diagram. A risk-ranking approach was used to rank the formulation and process risks. Furthermore, the effect of AMC quantity, stirring time, and volume of outer water phase on various responses, such as particle size, the amount of drug dissolved at 5 min (Q5) in simulated saliva fluid, and mean dissolution time (MDT) in simulated gastric fluid, was investigated using the Box-Behnken design. The optimized microparticles were then used to prepare orally disintegrating tablets (ODTs) and evaluated by in vitro and in vivo testing. The results demonstrated that particle size was influenced by the AMC amount and stirring time. Q5 was significantly affected by the amount of AMC and the volume of the outer water phase. On the other hand, these two factors had a positive effect on MDT. The optimized microparticles had a particle size of 174.45 ± 18.19 µm, Q5 of 5.04%, and MDT of 5.97 min. The ODTs with taste-masked microparticles showed acceptable in vitro dissolution with an MDT of 5 min. According to the results of a panel of six human volunteers, they greatly improved palatability.

Optimization and Characterization of Brimonidine Tartrate Nanoparticles-loaded In Situ Gel for the Treatment of Glaucoma

Purposes: The present study aimed to develop brimonidine tartrate loaded poly(lactic-co-glycolic acid) acid vitamin E-tocopheryl polyethylene glycol 1000 succinate (BRT-PLGA-TPGS) nanoparticles in thermosensitivein situ gel to improve mucoadhensive properties and drug holding capacity for the better management of glaucoma.Methods: Nanoparticles was optimized by means of Box-Behnken Design (BBD). The formulations were prepared using various concentration of PLGA (0.1-0.4% w/v) and TPGS (0.3-0.5% w/v). The analytical data of fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM) depicted the drug excipients compatibility and confirmed the nanoparticles. Nanoparticles incorporated gel was evaluated for transcorneal permeability, gelation time, gelling temperature, and rheological studies. In addition, in vitro, transcorneal permeation drug release studies and intraocular pressure (IOP) for optimized gel was also performed. Biocompatibility of formulations was investigated in rabbit model.Results: The drug loaded nanoparticles exhibited 115.72 ± 4.18 nm, 0.190 ± 0.02, -11.80 ± 2.24 mV and 74.85 ± 6.54% of mean size, polydispersity index (PDI), zeta potential and entrapment efficiency (% EE), respectively. As compared to marketed eye drop, the sustained and continuous release BRT release from Poloxamer-based in situ gel was 85.31 ± 3.51% till 24 h. The transcorneal steady-state flux (136.32 μg cm^-2 h^-1) of optimized in situ gel was approximately 3.5 times higher than marketed formulation (38.60 μg cm^-2 h^-1) flux at 4 h. The optimized formulation produces 3 fold greater influences on percentage reduction of IOP (34.46 ± 4.21%) than the marketed formulation (12.24 ± 2.90%) till 8 h.Conclusion: The incorporation of optimized BRT-PLGA-TPGS nanoparticles into a thermosensitivein situ gel matrix to improve precorneal residence time without causing eye irritation and also serve the sustained release of BRT through cornea for effective management of glaucoma.

Proniosomal Gel for Topical Delivery of Rutin: Preparation, Physicochemical Characterization and In Vitro Toxicological Profile Using 3D Reconstructed Human Epidermis Tissue and 2D Cells

Rutin (Rut) is a natural flavonol, well-known for its broad-spectrum of therapeutic effects, including antioxidant and antitumoral activities; still, it has a reduced clinical outcome due to its limited solubility in aqueous solutions. To overcome this drawback, this study proposes a novel formulation for rutin as a proniosomal gel for cutaneous applications. The gel was prepared by coacervation phase-separation method and complies with the standard requirements in terms of particle size (140.5 ± 2.56 nm), zeta potential (−27.33 ± 0.09 mV), encapsulation capacity (> 50%), pH (7.002 ± 0.18) and rheological properties. The results showed high biocompatibility of the gel on the 3D reconstructed human epidermis model characterized by increased viability of the cells and a lack of irritant and phototoxic potential. The evaluations on 2D cells confirm the preferential cytotoxic effect of Rut on melanoma cells (IC₅₀ value = 8.601 µM, nuclear fragmentation) compared to normal keratinocytes. Our data suggest that the proniosomal gel is a promising drug carrier for Rut in the management and prevention of skin disorders.

Development and evaluation of puerarin-loaded controlled release nanostructured lipid carries by central composite design

The present work was aimed at developing optimized puerarin-loaded nanostructured lipid carrier (PA-NLC) on base of phospholipid complex. The puerarin phospholipid complex (PA-PC) was prepared by a solvent evaporation method and the formulation was confirmed according to the encapsulation efficiency (EE%). The hepatoprotective effect of PA-NLC on BRL 3A cell stimulated by ethanol was carried out using MTT assay, and cell imaging was done using an inverted phase contrast tissue culture microscope. The NLCs were produced by nanoemulsion method using glyceryl monostearate (GMS), olive oil, and Poloxamer 188 as the solid, liquid lipids, and surfactant. A single factor analysis determined the optimal ratio of solid lipid to liquid lipid. A three-factor, five-level central composite design (CCD) was used to predict response variables and construct 3D-response contour plots. The independent variables, which were the concentrations of PA-PC, total lipid, and surfactant affected particle size, surface charge of the nanoparticles, and the EE. An optimized NLC composition consisted of 31.25% PA-PC, 46.87% GMS, 9.38% olive oil, and 18.75% Poloxamer 188. The NLC had an average particle size of 159 ± 1.1 nm, zeta potential of -28.3 mV, EE% of 92.16%, and drug loading (DL%) of 5.75%. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) studies showed that the formation of NLC was accompanied by changes in crystallinity and intermolecular interaction. The PA-NLC system showed an enhanced therapeutic effect on alcohol-induced cell injury of BRL-3A.

Advanced polymeric nanotechnology to augment therapeutic delivery and disease diagnosis

Therapeutic and diagnostic payloads are usually associated with properties that compromise their efficacy, such as poor aqueous solubility, short half-life, low bioavailability, nonspecific accumulation and diverse side effects. Nanotechnological solutions have emerged to circumvent some of these drawbacks, augmenting therapeutic and/or diagnostic outcomes. Nanotechnology has benefited from the rise in polymer science research for the development of novel nanosystems for therapeutic and diagnostic purposes. Polymers are a widely used class of biomaterials, with a considerable number of regulatory approvals for application in clinics. In addition to their versatility in production and functionalization, several synthetic and natural polymers demonstrate biocompatible properties that dictate their successful biological performance. This article highlights the physicochemical characteristics of a variety of natural and synthetic biocompatible polymers, as well as their role in the manufacture of nanotechnology-based systems, state-of-art applications in disease treatment and diagnosis, and current challenges in finding a way to clinics.

Antioxidant Activity and Hemocompatibility Study of Quercetin Loaded Plga Nanoparticles

Quercetin (QU) is an important flavonoid compound presenting lots of biological activities, but its application has been limited due to its low aqueous solubility and instability. In this study, conducted to improve these properties of the quercetin, quercetin-encapsulated PLGA nanoparticles were prepared, characterized, and evaluated for antioxidant and hemolytic activity. Nanoparticles were produced by single emulsion solvent evaporation method. Four different process parameters initial QU amount, PVA concentration, PVA volume, and initial PLGA amount were investigated to obtain the nanoparticles which have minimum particle size and maximum entrapment efficiency. Synthesized nanoparticles were evaluated for particle size, entrapment efficiency, and reaction yield. Additionally, antioxidant properties and in-vitro hemolytic activity of quercetin loaded nanoparticles with different particle size were also evaluated for the first time in the literature. The antioxidant activity results showed that nanoparticles have different antioxidant activity, depending on the amount of quercetin release from nanoparticles at different particle sizes. The hemolytic activity results show that all nanoparticles exhibited favorable compatibility to red blood cells and no significant hemolytic effect was observed.

Development and ex-vivo skin permeation studies of finasteride–poly(lactic acid-co-glycolic acid) and minoxidil–chitosan nanoparticulate systems

This study was designed to improve the permeability of two drugs (finasteride and minoxidil) through the skin. Finasteride-loaded poly(lactic acid- co-glycolic acid) and minoxidil-loaded chitosan nanoparticles were prepared by nanoprecipitation and ionic gelation method, respectively, and subsequently incorporated into semisolid Carbopol 940 gel. These fabricated nanoparticles were characterized for their pharmaceutical and chemical behavior. Nanoparticles were found a nearly spherical shape in the scanning electron microscopic studies and exhibited particle size in a range of 211–1012 nm. Finasteride- and minoxidil-loaded nanoparticles were optimized for relatively higher entrapment efficiency of 98% and 95%, respectively, by using the optimal concentration of polymers and stabilizers. All formulations were clear with smooth homogeneous texture and having pH values compatible with that of skin. This nanoparticulate system suspended in gel prolonged the release of drugs for up to 24 h and enhanced the drug permeability through the skin and retention of drug-loaded nanoparticles within the hair follicular routes. Therefore, these nanoparticles incorporated in the gel were found as a promising candidate for topical application in the treatment of alopecia by reducing the dosing frequency and adverse effects and as an effective strategy for improving the patient compliance toward therapy.

A comparison of models for the analysis of the kinetics of drug release from PLGA-based nanoparticles

Purpose

Poly (lactic-co-glycolic acid) has received much academic attention for developing nanotherapeutics and FDA has approved it for several applications. An important parameter that dictates the bioavailability and hence the biological effect of the drug is drug release from its delivering system. This study offers a comparative mathematical analysis of drug release from Poly (lactic-co-glycolic acid)–based nanoparticles to suggest a general model explaining multi-mechanistic release they provide.

Methods

Eight release models, zero order, first order, Higuchi, Hixson-Crowell, the square root of mass, the three-second root of mass, Weibull and Korsmeyer-Peppas, as well as the second degree polynomial equation were applied to 60 data sets. The models analysed regarding several types of errors, regression parameters and average Akaike information criterion.

Results and discussion

Most of the data sets present the highest R², the lowest overall error and AIC for the Weibull model. Weibull model with the mean AIC = -36.37 and mean OE = 7.24 and the highest NE less than 5, 10, 15 and 20 % in most of the cases best fits the release data from various PLGA-based drug delivery systems that are studied. Weibull model seems to show enough flexibility to describe various release patterns PLGA provides.

Design of Experiments (DoE) Approach to Optimize the Sustained Release Microparticles of Gefitinib

Background:

Gefitinib (GEF), the kinase inhibitor, is presently available as tablets to be taken orally in high doses of 250-500 mg per day due to its poor solubility. The solubility issues affect not only its onset of action but also the bioavailability. These drawbacks foresight the need to have an alternate dosage form, preferably a sustained release formulation.

Methods:

In the present study, microparticles were prepared by emulsion solvent evaporation using PLGA 50:50 (GEF-PLGA MP). A 32 factorial design was used to optimize the critical quality parameters to the set mean particle size in the range of 7.4±2.5 µm and entrapment efficiency of 80%. SEM microscopy of the prepared microparticles confirmed to have a spherical smooth shape. The GEFPLGA- MPs sustained the release of GEF for 72 hours. The first-order kinetics ruled the mechanism of drug release and was predicted to follow Fickian diffusion.

Result:

Anticancer efficacy was judged by the cytotoxicity studies using the L132 lung cancer cells. MTT assay showed 3-fold enhanced cytotoxicity of GEF loaded microparticles against L132 cells as compared to plain GEF.

Conclusion:

It was concluded that gefitinib can be efficiently loaded into the biodegradable polymer PLGA to provide sustained release of the drug.

Nanostructured lipid carriers versus solid lipid nanoparticles for the potential treatment of pulmonary hypertension via nebulization

With the non-selective vasodilating action, short half-life and first-pass metabolism of sildenafil (SC), local application in the lung for pulmonary arterial hypertension is of high demand. Although several nanosystems have been lately investigated, nanostructured lipid carriers (NLCs) give promises of potential safety, biodegradability and controlled drug release. In the current study, NLCs comprising either precirol, stearic acid or beeswax as solid lipid in presence of oleic acid as liquid lipid and PVA or poloxamer as emulsifier were prepared. Optimized NLCs (200-268 nm in size) were appraised versus SLNs both in vitro and in vivo. Precirol/PVA-based SLNs and NLCs ensued high entrapment efficiencies (EE > 95%) and controlled release behaviour over 6 h even though NLCs showed higher release profile. Stability studies at 4 °C indicated potential colloidal and entrapment stability over 3 months. Interestingly, NLCs demonstrated efficient nebulization, low interaction with mucin and higher viability of A549 cells (3-fold increase in IC₅₀ relative to SLNs) providing good aptitudes for pulmonary application. In vivo administration of free SC in rats revealed localized intra-alveolar bleeding, presumably related to excessive vasodilatation. Meanwhile, the nanoencapsulated drug confirmed normal lung parenchyma with minimal incidence of bleeding. Inspiring results highlight the potential of sildenafil-laden nanostructured lipid carriers as pulmonary drug delivery system.

Synthesis, characterization and antibacterial activity of juglone encapsulated PLGA nanoparticles

AIMS

The aim of the study was to examine the effect of different process parameters which including; initial juglone amount, initial poly(d,l-lactide co-glycolide) amount, polyvinyl alcohol volume and polyvinyl alcohol concentration on encapsulation of juglone to poly(d,l-lactide co-glycolide) nanoparticles.

METHODS AND RESULTS

The synthesized nanoparticle formulations were analyzed for reaction yield, encapsulation efficiency, particle size, polydispersity, zeta potential and juglone release. In conjunction with the highest encapsulation rate, the highest amount of juglone release was obtained for F4 formulation, which has 281·8 nm particle size, 0·217 polydispersity index, and -19·55 mV zeta potential. After the detailed physicochemical characterization of this formulation, the four different kinetic models were used and it was found that juglone release mechanism controlled by Fickian diffusion method. According to antimicrobial activity results, minimal inhibitory concentration (MIC) values of both F4 and free juglone is higher for Gram negative bacteria than Gram positive bacteria. Inhibition zone diameters in the quantitative methods are found 15 and 16 mm for Staphylococcus aureus, 9 and 7 mm for Bacillus cereus, respectively, for F4 and free juglone. Moreover, the MIC values for qualitative methods were found 31·5 μg ml^-1 for two bacteria strains.

CONCLUSIONS

It was found that the antibacterial activity of the juglone nanoparticles was higher and longer than the free juglone. Additionally, a similar antimicrobial effect with a lower juglone amount (obtained from controlled release study) indicates that nanoparticle formulation is more effective.

SIGNIFICANCE AND IMPACT OF THE STUDY

The use of nanoparticle formulations of juglone in biological systems and applications could be more beneficial than its free form due to its toxicity.

Tenofovir disoproxil fumarate loaded PLGA nanoparticles for enhanced oral absorption: Effect of experimental variables and in vitro, ex vivo and in vivo evaluation

In this study, PLGA based nanoparticles of tenofovir disoproxil fumarate (TDF) were designed for enhancing its oral absorption. To develop PLGA based TDF nanoparticles with the goal of minimum particle size and maximum entrapment efficiency statistical optimization techniques (factorial design and response surface methodology) were employed. The optimized nanoparticles were characterized for size, shape, charge and physical state. Further, the stability, cytotoxicity and metabolic protective effect of the nanoparticles were evaluated. Single dose pharmacokinetic study in rats was conducted to evaluate the oral absorption of the designed nanoparticles. Ex vivo everted gut sac studies were performed to evaluate the role of active uptake mechanisms in the absorption of the designed nanoparticles. The results showed that the statistical models employed could determine the interaction effects of the critical factors which were used in the optimization of the nanoparticles. The optimized nanoparticles with a particle size of 218±3.85nm and an entrapment efficiency of 57.3±1.6%. The nanoparticles were able to increase the AUC of tenofovir by 5.8 fold. It was observed that active uptake mechanisms predominantly via clathrin-mediated uptake played a key role in increasing the oral absorption of TDF.

Development of antiproliferative long-circulating liposomes co-encapsulating doxorubicin and curcumin, through the use of a quality-by-design approach

The aim of this work was to use the quality-by-design (QbD) approach in the development of long-circulating liposomes co-loaded with curcumin (CUR) and doxorubicin (DOX) and to evaluate the cytotoxic potential of these liposomes in vitro using C26 murine colon carcinoma cell line. Based on a risk assessment, six parameters, namely the phospholipid, CUR and DOX concentrations, the phospholipid:cholesterol molar ratio, the temperature during the evaporation and hydration steps and the pH of the phosphate buffer, were identified as potential risk factors for the quality of the final product. The influence of these variables on the critical quality attributes of the co-loaded liposomal CUR and DOX was investigated: particle size, zeta potential, drug loading and entrapment efficiency. For this, a 2⁶⁻² factorial design was employed to establish a proper regression model and to generate the contour plots for the responses. The obtained data served to establish the design space for which different combinations of variables yielded liposomes with characteristics within predefined specifications. The validation of the model was carried out by preparing two liposomal formulations corresponding to the robust set point from within the design space and one outside the design space and calculating the percentage bias between the predicted and actual experimental results. The in vitro antiproliferative test showed that at higher CUR concentrations, the liposomes co-encapsulating CUR and DOX had a greater cytotoxic effect than DOX-loaded liposomes. Overall, this study showed that QbD is a useful instrument for controlling and optimizing the manufacturing process of liposomes co-loaded with CUR and DOX and that this nanoparticulate system possesses a great potential for use in colon cancer therapy.

Inhaled sildenafil as an alternative to oral sildenafil in the treatment of pulmonary arterial hypertension (PAH)

The practice of treating PAH patients with oral or intravenous sildenafil suffers from the limitations of short dosing intervals, peripheral vasodilation, unwanted side effects, and restricted use in pediatric patients. In this study, we sought to test the hypothesis that inhalable poly(lactic-co-glycolic acid) (PLGA) particles of sildenafil prolong the release of the drug, produce pulmonary specific vasodilation, reduce the systemic exposure of the drug, and may be used as an alternative to oral sildenafil in the treatment of PAH. Thus, we prepared porous PLGA particles of sildenafil using a water-in-oil-in-water double emulsion solvent evaporation method with polyethyleneimine (PEI) as a porosigen and characterized the formulations for surface morphology, respirability, in-vitro drug release, and evaluated for in vivo absorption, alveolar macrophage uptake, and safety. PEI increased the particle porosity, drug entrapment, and produced drug release for 36h. Fluorescent particles showed reduced uptake by alveolar macrophages. The polymeric particles were safe to rat pulmonary arterial smooth muscle cell and to the lungs, as evidenced by the cytotoxicity assay and analyses of the injury markers in the bronchoalveolar lavage fluid, respectively. Intratracheally administered sildenafil particles elicited more pulmonary specific and sustained vasodilation in SUGEN-5416/hypoxia-induced PAH rats than oral, intravenous, or intratracheal plain sildenafil did, when administered at the same dose. Overall, true to the hypothesis, this study shows that inhaled PLGA particles of sildenafil can be administered, as a substitute for oral form of sildenafil, at a reduced dose and longer dosing interval.

Nebulized solid lipid nanoparticles for the potential treatment of pulmonary hypertension via targeted delivery of phosphodiesterase-5-inhibitor

Phosphodiesterase type 5 (PDE-5) inhibitors - among which sildenafil citrate (SC) - play a primary role in the treatment of pulmonary hypertension (PH). Yet, SC can be only administered orally or parenterally with lot of risks. Targeted delivery of SC to the lungs via inhalation/nebulization is mandatory. In this study, solid lipid nanoparticles (SLNs) loaded with SC were prepared and characterized in terms of colloidal, morphological and thermal properties. The amount of drug loaded and its release behavior were estimated as a function of formulation variables. The potential of lipid nanocarriers to retain their properties following nebulization and autoclaving was investigated. In addition, toxicity aspects of plain and loaded SLNs on A549 cells were studied with respect to concentration. Spherical SLNs in the size range (100-250nm) were obtained. Particles ensured high encapsulation efficiency (88-100%) and sustained release of the payload over 24h. Cell-based viability experiments revealed a concentration-dependant toxicity for both plain and loaded SLNs recording an IC₅₀ of 516 and 384μg/mL, respectively. Nebulization with jet nebulizer and sterilization via autoclaving affected neither the colloidal stability of SLNs nor the drug entrapment, proving their potential as pulmonary delivery system. Interaction of SLNs with mucin was a function of the emulsifier coating layer. Results yet seeking clinical evidence - might give promises of new therapy for PH of higher safety, better performance and higher patient compliance.

PLGA Microparticles Entrapping Chitosan-Based Nanoparticles for the Ocular Delivery of Ranibizumab

Age-related macular degeneration (AMD) is the leading cause of certified vision loss worldwide. The standard treatment for neovascular AMD involves repeated intravitreal injections of therapeutic proteins directed against vascular endothelial growth factor, such as ranibizumab. Biodegradable polymers, such as poly(lactic-co-glycolic acid) (PLGA), form delivery vehicles which can be used to treat posterior segment eye diseases, but suffer from poor protein loading and release. This work describes a "system-within-system", PLGA microparticles incorporating chitosan-based nanoparticles, for improved loading and sustained intravitreal delivery of ranibizumab. Chitosan-N-acetyl-l-cysteine (CNAC) was synthesized and its synthesis confirmed using FT-IR and (1)H NMR. Chitosan-based nanoparticles composed of CNAC, CNAC/tripolyphosphate (CNAC/TPP), chitosan, chitosan/TPP (chit/TPP), or chit/TPP-hyaluronic acid (chit/TPP-HA) were incorporated in PLGA microparticles using a modified w/o/w double emulsion method. Nanoparticles and final nanoparticles-within-microparticles were characterized for their protein-nanoparticle interaction, size, zeta potential, morphology, protein loading, stability, in vitro release, in vivo antiangiogenic activity, and effects on cell viability. The prepared nanoparticles were 17-350 nm in size and had zeta potentials of -1.4 to +12 mV. Microscopic imaging revealed spherical nanoparticles on the surface of PLGA microparticles for preparations containing chit/TPP, CNAC, and CNAC/TPP. Ranibizumab entrapment efficiency in the preparations varied between 13 and 69% and was highest for the PLGA microparticles containing CNAC nanoparticles. This preparation also showed the slowest release with no initial burst release compared to all other preparations. Incorporation of TPP to this formulation increased the rate of protein release and reduced entrapment efficiency. PLGA microparticles containing chit/TPP-HA showed the fastest and near-complete release of ranibizumab. All of the prepared empty particles showed no effect on cell viability up to a concentration of 12.5 mg/mL. Ranibizumab released from all preparations maintained its structural integrity and in vitro activity. The chit/TPP-HA preparation enhanced antiangiogenic activity and may provide a potential biocompatible platform for enhanced antiangiogenic activity in combination with ranibizumab. In conclusion, the PLGA microparticles containing CNAC nanoparticles showed significantly improved ranibizumab loading and release profile. This novel drug delivery system may have potential for improved intravitreal delivery of therapeutic proteins, thereby reducing the frequency, risk, and cost of burdensome intravitreal injections.

Application of quality-by-design approach to optimize diallyl disulfide-loaded solid lipid nanoparticles

The current work was carried out by the principles of quality-by-design approach to develop an optimized solid lipid nanoparticles (SLNs) formulation of diallyl disulfide (DADS) through systematic statistical study. And its antitumor activity of DADS was also evaluated on breast cancer cell lines. To understand the effect of formulation variables (critical parameters) on the responses (critical quality attributes) of SLN, a 3-factor, 3-level Box-Behnken design, was explored to predict the responses such as particle size (Y1) and % entrapment efficiency (EE) (Y2) when concentration of surfactant (X1), amount of lipid (X2), and volume of solvent (X3) were selected as independent variables. Particle size analysis revealed that all the batches were within the nanometer range. DADS was released from the SLN much more rapidly at pH 4.5 than at pH 7.4, which is a desirable characteristic for tumor-targeted drug delivery. The cytotoxicity, reactive oxygen species (ROS), determination revealed that the antitumor activity of DADS is enhanced with SLN compared to DADS-free drug, and apoptosis is the mechanism underlying the cytotoxicity. The present study indicated the remarkable potential of DADS-SLN in enhancing the anticancer effect of DADS in breast cancer cells in vitro.

Development and optimization of quercetin-loaded PLGA nanoparticles by experimental design

Background and aims

Quercetin is a flavonoid with good antioxidant activity, and exhibits various important pharmacological effects. The aim of the present work was to study the influence of formulation factors on the physicochemical properties of quercetin-loaded polymeric nanoparticles in order to optimize the formulation.

Materials and methods

The nanoparticles were prepared by the nanoprecipitation method. A 3-factor, 3-level Box-Behnken design was employed in this study considering poly(D,L-lactic-co-glycolic) acid (PLGA) concentration, polyvinyl alcohol (PVA) concentration and the stirring speed as independent variables. The responses were particle size, polydispersity index, zeta potential and encapsulation efficiency.

Results

The PLGA concentration seemed to be the most important factor influencing quercetin-nanoparticle characteristics. Increasing PLGA concentration led to an increase in particle size, as well as encapsulation efficiency. On the other hand, it exhibited a negative influence on the polydispersity index and zeta potential. The PVA concentration and the stirring speed had only a slight influence on particle size and polydispersity index. However, PVA concentration had an important negative effect on the encapsulation efficiency. Based on the results obtained, an optimized formulation was prepared, and the experimental values were comparable to the predicted ones.

Conclusions

The overall results indicated that PLGA concentration was the main factor influencing particle size, while entrapment efficiency was predominantly affected by the PVA concentration.

Formulation, characterization, and evaluation of ligand-conjugated biodegradable quercetin nanoparticles for active targeting

The aim of this study was to design a targeted drug delivery system carrying a natural anticancer drug Quercetin (Qu), specifically for skin cancer. A central composite design was applied separately for each ligand, and the quadratic model was used for the process. The surface morphology was confirmed by transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR), and in vitro release studies were also performed. The MTT assay was performed against two different cell lines, to measure their anticancer potentials and their targeting ability. The study thus reveals that MA-Qu-PLGA and FA-Qu-PLGA nanoparticles (NPs) can be used as effective drug delivery systems for skin cancer treatment encompassing natural drugs.

Follicular delivery of spironolactone via nanostructured lipid carriers for management of alopecia

Spironolactone (SL) is a US Food and Drug Administration-approved drug for the treatment of hypertension and various edematous conditions. SL has gained a lot of attention for treating androgenic alopecia due to its potent antiandrogenic properties. Recently, there has been growing interest for follicular targeting of drug molecules for treatment of hair and scalp disorders using nanocolloidal lipid-based delivery systems to minimize unnecessary systemic side effects associated with oral drug administration. Accordingly, the objective of this study is to improve SL efficiency and safety in treating alopecia through the preparation of colloidal nanostructured lipid carriers (NLCs) for follicular drug delivery. SL-loaded NLCs were prepared by an emulsion solvent diffusion and evaporation method using 23 full factorial design. All of the prepared formulations were spherical in shape with nanometric size range (215.6–834.3 nm) and entrapment efficiency >74%. Differential scanning calorimetry thermograms and X-ray diffractograms revealed that SL exists in amorphous form within the NLC matrices. The drug release behavior from the NLCs displayed an initial burst release phase followed by sustained release of SL. Confocal laser scanning microscopy confirmed the potential of delivering the fluorolabeled NLCs within the follicles, suggesting the possibility of using SL-loaded NLCs for localized delivery of SL into the scalp hair follicles.

Preparation of transfersomes encapsulating sildenafil aimed for transdermal drug delivery: Plackett-Burman design and characterization

The aim of this work was to study the effect of different processing and formulation parameters on the preparation of sildenafil (SD) transfersomes utilizing the Plackett-Burman design. The drug to phospholipid molar ratio (X1), phospholipid to surfactant ratio (X2), hydrophilic-lipophilic balance of the surfactant (X3), hydration medium pH (X4), hydration time (X5) and the temperature of hydration (X6) were investigated to study their effect on the vesicle size (Y1) and entrapment efficiency (EE) of the drug (Y2). The preparation conditions were optimized to minimize the vesicle size and maximize the EE. The prepared transfersomes were also subjected to zeta potential measurements, morphological and physicochemical characterization. The combinations of factors that achieve the optimum desirability were identified. An optimized formulation was prepared and characterized once more for its vesicle size, EE, in vitro permeation and deformability index. The results revealed that both X3 and X6 had a pronounced effect on Y1, while X1 and X4 showed a significant effect on Y2. Morphological and physicochemical study confirmed the transfersomes spherical shape and compatibility of the formulation ingredients. The formulation with optimum desirability showed EE and vesicle size of 97.21% and 610 nm, respectively. In vitro permeation of the drug-loaded transfersome showed more than 5-fold higher permeation rate compared with drug suspension. Deformability index verified elasticity of the preparation. The significant variables could be optimized again to produce smaller vesicle size that could increase SD permeation from transdermal delivery systems loaded drug optimized transfersomes.

Topotecan-tamoxifen duple PLGA polymeric nanoparticles: investigation of in vitro, in vivo and cellular uptake potential

The dual drug loaded poly(dl-lactic-co-glycolic acid) (PLGA(1)) nanoparticles (TOP-TAM NPs(2)) concurrently delivering topotecan hydrochloride (TOP(3)) and tamoxifen citrate (TAM(4)) were developed to achieve synergism for the treatment of breast cancer by enhancing the permeation of TOP through the gut and the cells present in the breast. TAM acted as P-glycoprotein (P-gp(5)) inhibitor, reduced the side effects of individual drugs by reducing the dose. The NPs were prepared by double emulsion (w/o/w) method. The optimized TOP-TAM NPs were found to have smooth and spherical morphology by using SEM(6) and TEM(7) technique. Similarly size of nanoparticles was found to be 151.2 ± 1.6 nm with 0.147 ± 0.03 polydispersity index (PDI(8)). The percentage entrapment efficiency of 95.17 ± 3.57 and 57.77 ± 2.2 was found for TAM and TOP respectively. The lyophillized nanoparticles under DSC(9) showed amorphous nature of both TOP and TAM. In an in vitro release study the release of drugs from TOP-TAM NPs was found to follow the Higuchi pattern. The ex vivo gut permeation study revealed that the TAM enhanced the permeation of TOP and increased its bioavailability by 1.9 folds. The permeation and activity of combination of drugs were further confirmed by carrying out cell line studies on MCF-7 cells.

Formulation and optimization of polymeric nanoparticles for intranasal delivery of lorazepam using Box-Behnken design: in vitro and in vivo evaluation

The aim of the present study was to optimize lorazepam loaded PLGA nanoparticles (Lzp-PLGA-NPs) by investigating the effect of process variables on the response using Box-Behnken design. Effect of four independent factors, that is, polymer, surfactant, drug, and aqueous/organic ratio, was studied on two dependent responses, that is, z-average and % drug entrapment. Lzp-PLGA-NPs were successfully developed by nanoprecipitation method using PLGA as polymer, poloxamer as surfactant and acetone as organic phase. NPs were characterized for particle size, zeta potential, % drug entrapment, drug release behavior, TEM, and cell viability. Lzp-PLGA-NPs were characterized for drug polymer interaction using FTIR. The developed NPs showed nearly spherical shape with z-average 167–318 d·nm, PDI below 0.441, and −18.4 mV zeta potential with maximum % drug entrapment of 90.1%. In vitro drug release behavior followed Korsmeyer-Peppas model and showed initial burst release of 21.7 ± 1.3% with prolonged drug release of 69.5 ± 0.8% from optimized NPs up to 24 h. In vitro drug release data was found in agreement with ex vivo permeation data through sheep nasal mucosa. In vitro cell viability study on Vero cell line confirmed the safety of optimized NPs. Optimized Lzp-PLGA-NPs were radiolabelled with Technitium-99m for scintigraphy imaging and biodistribution studies in Sprague-Dawley rats to establish nose-to-brain pathway.