Solid lipid microparticles: formulation, preparation, characterisation, drug release and applications

Flavonoids for treating pulmonary fibrosis: Present status and future prospects

Idiopathic pulmonary fibrosis (IPF) is a progressive lung disease with an unknown underlying cause. There is no complete cure for IPF; however, two anti-fibrotic agents (Nintedanib and pirfenidone) are approved by the USFDA to extend the patient's life span. Therefore, alternative therapies supporting the survival of fibrotic patients have been studied in recent literature. The abundance of phenolic compounds, particularly flavonoids, has gathered attention due to their potential health benefits. Various flavonoids, like naringin, quercetin, baicalin, baicalein, puerarin, silymarin, and kaempferol, exhibit anti-inflammatory and anti-oxidant properties, which help decrease lung fibrosis. Various databases, including PubMed, EBSCO, ProQuest, and Scopus, as well as particular websites, such as the World Health Organisation and the National Institutes of Health, were used to conduct a literature search. Several mechanisms of action of flavonoids are reported with the help of in vivo and cell line studies emphasizing their ability to modulate oxidative stress, inflammation, and fibrotic processes in the lungs. They are reported for the restoration of biomarkers like hydroxyproline, cytokines, superoxide dismutase, malondialdehyde and others associated with IPF and for modulating various pathways responsible for the progression of pulmonary fibrosis. Yet, flavonoids have some drawbacks, such as poor solubility, challenging drug loading, stability issues, and scarce bioavailability. Therefore, novel formulations of flavonoids are explored, including liposomes, solid lipid microparticles, polymeric nanoparticles, nanogels, and nanocrystals, to enhance the therapeutic efficacy of flavonoids in pulmonary fibrosis. This review focuses on the role of flavonoids in mitigating idiopathic pulmonary fibrosis, their mode of action and novel formulations.

Characterization and Hydrolysis Studies of a Prodrug Obtained as Ester Conjugate of Geraniol and Ferulic Acid by Enzymatic Way

Ferulic acid (Fer) and geraniol (Ger) are natural compounds whose antioxidant and anti-inflammatory activity confer beneficial properties, such as antibacterial, anticancer, and neuroprotective effects. However, the short half-lives of these compounds impair their therapeutic activities after conventional administration. We propose, therefore, a new prodrug (Fer-Ger) obtained by a bio-catalyzed ester conjugation of Fer and Ger to enhance the loading of solid lipid microparticles (SLMs) designed as Fer-Ger delivery and targeting systems. SLMs were obtained by hot emulsion techniques without organic solvents. HPLC-UV analysis evidenced that Fer-Ger is hydrolyzed in human or rat whole blood and rat liver homogenates, with half-lives of 193.64 ± 20.93, 20.15 ± 0.75, and 3.94 ± 0.33 min, respectively, but not in rat brain homogenates. Studies on neuronal-differentiated mouse neuroblastoma N2a cells incubated with the reactive oxygen species (ROS) inductor H2O2 evidenced the Fer-Ger ability to prevent oxidative injury, despite the fact that it appears ROS-promoting. The amounts of Fer-Ger encapsulated in tristearin SLMs, obtained in the absence or presence of glucose, were 1.5 ± 0.1%, allowing the control of the prodrug release (glucose absence) or to sensibly enhance its water dissolution rate (glucose presence). These new "green" carriers can potentially prolong the beneficial effects of Fer and Ger or induce neuroprotection as nasal formulations.

Liposomes in the cosmetics: present and outlook

Liposomes are small spherical vesicles composed of phospholipid bilayers capable of encapsulating a variety of ingredients, including water- and oil-soluble compound, which are one of the most commonly used piggybacking and delivery techniques for many active ingredients and different compounds in biology, medicine and cosmetics. With the increasing number of active cosmetic ingredients, the concomitant challenge is to effectively protect, transport, and utilize these substances in a judicious manner. Many cosmetic ingredients are ineffective both topically and systemically when applied to the skin, thus changing the method of delivery and interaction with the skin of the active ingredients is a crucial step toward improving their effectiveness. Liposomes can improve the delivery of active ingredients to the skin, enhance their stability, and ultimately, improve the efficacy of cosmetics and and pharmaceuticals. In this review, we summarized the basic properties of liposomes and their recent advances of functionalities in cosmetics and and pharmaceuticals. Also, the current state of the art in the field is discussed and the prospects for future research areas are highlighted. We hope that this review will provide ideas and inspiration on the application and development of cosmetics and pharmaceuticals.

Drug Release from Lipid Microparticles-Insights into Drug Incorporation and the Influence of Physiological Factors

The aim of this study was to assess the impact of physiological factors, namely tear fluid and lysozyme enzyme, as well as surfactant polysorbate, on the release profile from solid lipid microparticles (SLM), in the form of dispersion intended for ocular application. Indomethacin (Ind) was used as a model drug substance and a release study was performed by applying the dialysis bag method. Conducting release studies taking into account physiological factors is expected to improve development and screening studies, as well as support the regulatory assessment of this multi-compartment lipid dosage form. The effect of the lysozyme was directly related to its effect on lipid microparticles, as it occurred only in their presence (no effect on the solubility of Ind). Polysorbate also turned out to be an important factor interacting with the SLM surface, which determined the release of Ind from SLM. However, in study models without tear fluid or lysozyme, the release of Ind did not exceed 60% within 96 h. Ultimately, only the simultaneous application of artificial tear fluid, lysozyme, and polysorbate allowed for the release of 100% of Ind through the SLM dispersion. The examination of the residues after the release studies indicated the possibility of releasing 100% of Ind from SLM without complete degradation of the microparticles' matrix. The incubation of SLM with tear fluid confirmed a similar influence of physiological factors contained in tear fluid on the surface structure of SLM as that observed during the in vitro studies.

Development of solid lipid microparticles (SLMs) containing asiatic acid for topical treatment of acne: Characterization, stability, in vitro and in vivo anti-acne assessment

Solid lipid microparticles (SLMs) represent a promising approach for drug delivery in anti-acne applications. In this study, asiatic acid-loaded SLMs (AASLMs) were prepared by melt emulsification method in conjunction with freeze-drying. Comprehensive evaluations comprised particle size, %entrapment efficiency (%EE), %labeled amount (%LA), surface morphology, stability, %release, %skin permeation, and anti-acne activity. The AASLMs exhibited an average particle size ranging from 7.46 to 38.86 µm, with %EE and %LA falling within the range of 31.56 to 100.00 and 90.43 to 95.38, respectively. The AASLMs demonstrated a spherical shape under scanning electron microscopy, and maintained stability over a 3-month period. Notably, formulations with 10 % and 15 % cetyl alcohol stabilized with poloxamer-188 (specifically F6 and F12) displayed a minimum inhibitory concentration (MIC) value of 75 mg/ml against Cutibacterium acnes. Furthermore, F12 exhibited a higher %release and %skin permeation compared to F6 over 24 h. In a single-blind clinical trial involving fifteen participants with mild-to-moderate acne, F12 showcased its potential not only in reducing porphyrin intensity and enhancing skin barriers but also in significantly improving skin hydration and brightness. However, further investigations with larger subject cohorts encompassing diverse age groups and genders are necessary to thoroughly establish the performance of the developed AASLMs.

Compritol®-based solid lipid nanoparticles of desvenlafaxine prepared by ultrasonication-assisted hot-melt encapsulation to modify its release

Aims: Desvenlafaxine (DES) in conventional dosage forms shows initial burst release after oral administration, leading to exaggeration of its side effects. These side effects can be overcome by a sustained-release dosage form using the chemically inert, low-melting-point lipid Compritol® 888 ATO, as it reduces initial burst release. Materials & methods: The potential of DES-loaded solid lipid nanoparticles (DES-SLNs) synthesized by ultrasonication-assisted hot-melt encapsulation to modify the release of DES was investigated. Results: The entrapment efficiency of DES-SLNs was 65.90% with the in vitro release profile showing a sustained-release behavior achieving 81% cumulative release within 16 h without initial burst release. Conclusion: DES-SLNs are a potential carrier for sustained release of water-soluble antidepressant drugs such as DES.

Microparticles and multi-unit systems for advanced drug delivery

Microparticles have unique benefits in the formulation of multiparticulate and multi-unit type pharmaceutical dosage forms allowing improved drug safety and efficacy with favorable pharmacokinetics and patient centricity. On the other hand, the above advantages are served by high and well reproducible quality attributes of the medicinal product where even flexible design and controlled processability offer success as well as possible longer product life-cycle for the manufacturers. Moreover, the specific demands of patients can be taken into account, including simplified dosing regimens, flexible dosage, drug combinations, palatability, and ease of swallowing. In the more than 70 years since the first modified-release formulation appeared on the market, many new formulations have been marketed and many publications have appeared in the literature. More unique and newer pharmaceutical technologies and excipients have become available for producing tailor-made particles with micrometer dimensions and beyond. All these have contributed to the fact that the sub-units (e.g. minitablets, pellets, microspheres) that make up a multiparticulate system can vary widely in composition and properties. Some units have mucoadhesive properties and others can float to contribute to a suitable release profile that can be designed for the multiparticulate formula as a whole. Nowadays, there are some available formulations on the market, which are able to release the active substance even for several months (3 or 6 months depending on the type of treatment). In this review, the latest developments in technologies that have been used for a long time are presented, as well as innovative solutions such as the applicability of 3D printing to produce subunits of multiparticulate systems. Furthermore, the diversity of multiparticulate systems, different routes of administration are also presented, touching the ones which are capable of carrying the active substance as well as the relevant, commercially available multiparticle-based medical devices. The versatility in size from 1 µm and multiplicity of formulation technologies promise a solid foundation for the future applications of dosage form design and development.

Clinical Applications of Sunscreens and Formulation Advancements

Sunscreens cover the big market ratio in terms of cosmetic applications, but the therapeutic necessity of sunscreen still needs to be uncovered in the clinical context. Clinically, sunscreens are being employed more often nowadays as a result of the rising consequences of skin malignancies and the photodamaging effects of UV radiation. Sunscreens are essential to prevent aging by shielding the skin from the harmful effects of ultraviolet (UV) radiation. Over the recent decades, there has been a significant evolution in the usage of sunscreens as photo protectants. The demand for sunscreen formulations will inevitably rise as more people become aware of the protection that sunscreens provide against tanning, photoaging, non-melanoma skin cancers, premalignant skin lesions, and skin melanomas. The novel contemporary formulation techniques are also beneficial in enhancing the product's aesthetic look and quality. Recently, regulatory agencies have also started paying attention to the regulation of the clinical application, efficacy, and safety parameters related to sunscreen. This review underlines the pathophysiological response of UV exposure with the therapeutic applications of sunscreen in various dermatological conditions and the recent formulation advancements in the development of sunscreen.

Dimeric ferulic acid conjugate as a prodrug for brain targeting after nasal administration of loaded solid lipid microparticles

OBJECTIVE

Ferulic acid (Fer) displays antioxidant/anti-inflammatory properties useful against neurodegenerative diseases. To increase Fer uptake and its central nervous system residence time, a dimeric prodrug, optimizing the Fer loading on nasally administrable solid lipid microparticles (SLMs), was developed.

METHODS

The prodrug was synthesized as Fer dimeric conjugate methylated on the carboxylic moiety. Prodrug antioxidant/anti-inflammatory properties and ability to release Fer in physiologic environments were evaluated. Tristearin or stearic acid SLMs were obtained by hot emulsion technique. In vivo pharmacokinetics were quantified by HPLC.

RESULTS

The prodrug was able to release Fer in physiologic environments (whole blood and brain homogenates) and induce in vitro antioxidant/anti-inflammatory effects. Its half-life in rats was 18.0 ± 1.9 min. Stearic acid SLMs, exhibiting the highest prodrug loading and dissolution rate, were selected for nasal administration to rats (1 mg/kg dose), allowing to obtain high prodrug bioavailability and prolonged residence in the cerebrospinal fluid, showing AUC (Area Under Concentration) values (108.5 ± 3.9 μg∙mL-1∙min) up to 30 times over those of Fer free drug, after its intravenous/nasal administration (3.3 ± 0.3/5.16 ± 0.20 μg∙mL-1∙min, respectively) at the same dose. Chitosan presence further improved the prodrug brain uptake.

CONCLUSIONS

Nasal administration of prodrug-loaded SLMs can be proposed as a noninvasive approach for neurodegenerative disease therapy.

Comparison of the In Vitro Drug Release Methods for the Selection of Test Conditions to Characterize Solid Lipid Microparticles

The release profiles of active substances from microspheres are one of the most important features in solid lipid microparticles (SLM) characterization. Unfortunately, the results of the dissolution tests are largely dependent on the chosen method and test conditions, which in relation to novel dosage forms, such as dispersions of lipid microspheres, are not clearly defined in international compendiums and guidelines. This makes it impossible to compare the results of different studies. The aim of the research was to identify the factors most influencing the variability of the obtained results. An attempt was also made to select the most appropriate method for testing drug substance release from SLM. Various dissolution methods were employed (method I: without a membrane, method II: in a dialysis bag, and method III: in a Side-Bi-Side chamber), and the obtained release profiles of cyclosporine and indomethacin from SLM dispersions were compared. In addition to the effect of membranes, the types of acceptor fluids were also investigated. Significant differences were observed when testing the SLM formulations under various test conditions. The results were significantly influenced by the selected membrane, the acceptor fluid, or the difference in the concentrations of active substance between the donor and acceptor compartments. The burst effect observed in some experimental methods was not noticed in other conditions. At this stage, the method with a dialysis bag has been selected as the most suitable, while the methods without the membrane can only play a complementary role.

Compritol-Based Alprazolam Solid Lipid Nanoparticles for Sustained Release of Alprazolam: Preparation by Hot Melt Encapsulation

The current study was designed to investigate the feasibility of incorporating the water-insoluble lipophilic drug Alprazolam (Alp) into solid lipid nanoparticles (SLNs) to offer the combined benefits of the quick onset of action along with the sustained release of the drug. Therefore, compritol-based alprazolam-loaded SLNs (Alp-SLNs) would provide early relief from anxiety and sleep disturbances and long-lasting control of symptoms in patients with depression, thereby enhancing patient compliance. The optimized Alp-SLNs analyzed by DLS and SEM showed consistent particle size of 92.9 nm with PI values and standard deviation of the measurements calculated at <0.3 and negative surface charge. These characteristic values demonstrate the desired level of homogeneity and good physical stability of Alp-SLNs. The SLNs had a good entrapment efficiency (89.4%) and high drug-loading capacity (77.9%). SEM analysis revealed the smooth spherical morphology of the SLNs. The physical condition of alprazolam and absence of interaction among formulation components in Alp-SLNs was confirmed by FTIR and DSC analyses. XRD analysis demonstrated the molecular dispersion of crystalline alprazolam in Alp-SLNs. The in vitro release study implied that the release of Alp from the optimized Alp-SLN formulation was sustained as compared to the Alp drug solution because Alp-SLNs exhibited sustained release of alprazolam over 24 h. Alp-SLNs are a promising candidate to achieve sustained release of the short-acting drug Alp, thereby reducing its dosing frequency and enhancing patient compliance.

Effect of drug load and lipid-wax blends on drug release and stability from spray-congealed microparticles

This study was designed to evaluate paraffin wax as a potential controlled release matrix for spray congealing and its impact on drug release and stability of the microparticles. Paraffin wax can form a hydrophobic barrier to moisture and reduce drug degradation besides retarding drug release in the gastrointestinal tract. More hydrophilic lipid-based additives can be incorporated to modulate the drug release through the paraffin wax barrier. This study reports the findings of lipid-wax formulations at preserving the stability of moisture-sensitive drugs in spray-congealed microparticles. Aspirin-loaded microparticles formulated with different drug loads, lipid additives, and lipid:wax ratios were produced by spray congealing. Stearic acid (SA), cetyl alcohol (CA), and cetyl ester (CE) were the lipid additives studied. The microparticles were evaluated for yield, encapsulation efficiency, particle size, drug stability, and release. CE exhibited the greatest effect on increasing drug release, followed by CA and SA. Dissolution profiles showed the best fit to Weibull kinetic model. The degree of drug degradation was low, with CA imparting the least protective effect, followed by SA and CE. Paraffin wax is useful for preserving the stability of moisture-sensitive aspirin and retarding its release from spray-congealed microparticles. The addition of lipid additives modulated drug release without compromising drug stability.

Erythromycin Formulations—A Journey to Advanced Drug Delivery

Erythromycin (ERY) is a macrolide compound with a broad antimicrobial spectrum which is currently being used to treat a large number of bacterial infections affecting the skin, respiratory tract, intestines, bones and other systems, proving great value from a clinical point of view. It became popular immediately after its discovery in 1952, due to its therapeutic effect against pathogens resistant to other drugs. Despite this major advantage, ERY exhibits several drawbacks, raising serious clinical challenges. Among them, the very low solubility in water and instability under acidic conditions cause a limited efficacy and bioavailability. Apart from this, higher doses promote drug resistance and undesirable effects. In order to overcome these disadvantages, during the past decades, a large variety of ERY formulations, including nanoparticles, have emerged. Despite the interest in ERY-(nano)formulations, a review on them is lacking. Therefore, this work was aimed at reviewing all efforts made to encapsulate ERY in formulations of various chemical compositions, sizes and morphologies. In addition, their preparation/synthesis, physico-chemical properties and performances were carefully analysed. Limitations of these studies, particularly the quantification of ERY, are discussed as well.

Effects of Microencapsulated Ferulic Acid or Its Prodrug Methyl Ferulate on Neuroinflammation Induced by Muramyl Dipeptide

Ferulic acid (Fer) is known for its antioxidant and anti-inflammatory activities, which are possibly useful against neurodegenerative diseases. Despite the ability of Fer to permeate the brain, its fast elimination from the body does not allow its therapeutic use to be optimized. The present study proposes the preparation and characterization of tristearin- or stearic acid-based solid lipid microparticles (SLMs) as sustained delivery and targeting systems for Fer. The microparticles were produced by conventional hot emulsion techniques. The synthesis of the methyl ester of Fer (Fer-Me) allowed its encapsulation in the SLMs to increase. Fer-Me was hydrolyzed to Fer in rat whole blood and liver homogenate, evidencing its prodrug behavior. Furthermore, Fer-Me displayed antioxidant and anti-inflammatory properties. The amount of encapsulated Fer-Me was 0.719 ± 0.005% or 1.507 ± 0.014% in tristearin or stearic acid SLMs, respectively. The tristearin SLMs were able to control the prodrug release, while the stearic acid SLMs induced a significant increase of its dissolution rate in water. Jointly, the present results suggest that the tristearin SLMs loaded with Fer-Me could be a potential formulation against peripheral neuropathic pain; conversely, the stearic acid SLMs could be useful for Fer-Me uptake in the brain after nasal administration of the formulation.

Nano-liposomal zein hydrolysate for improved apoptotic activity and therapeutic index in lung cancer treatment

Lung cancer is one of the most common cancers in the world with a high mortality rate. Zein is a protein compound whose protein isolate is not useful and whose protein hydrolysis produces biological activity. By encapsulating this bioactive compound inside the nanoparticles (NPs), it causes itself to reach the tumor site and destroy it rapidly. In this study, the effects of zein hydrolysate (ZH) and nano-liposomal ZH (N-ZH) were investigated on the human A549 cell line. Western blotting and cell cycle analyses showed that ZH and N-ZH caused cytotoxicity. They induced apoptosis via cell cycle arrest at the G0 phase, as well as significant increases in pro-apoptotic genes, such as Bax, caspase-3, -8, -9, and p53, accompanied with significant decreases in the anti-apoptotic marker Bcl-2. Based on the results, the cytotoxic and anticancer effects of N-ZH were higher than those of free ZH. In conclusion, liposomes improved the performance of ZH and dramatically reduced the IC₅₀ value of ZH. These findings provided the experimental evidence that N-ZH with favorable anticancer activity can be used as a therapeutic agent and strategy for lung cancer treatment in future clinical trials.

Spray Dried Rugose Lipid Particle Platform for Respiratory Drug Delivery

PURPOSE

To develop a new lipid-based particle formulation platform for respiratory drug delivery applications. To find processing conditions for high surface rugosity and manufacturability. To assess the applicability of the new formulation method to different lipids.

METHODS

A new spray drying method with a simplified aqueous suspension feedstock preparation process was developed for the manufacture of rugose lipid particles of 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC). A study covering a wide range of feedstock temperatures and outlet temperatures was conducted to optimize the processing conditions. Aerosol performance was characterized in vitro and in silico to assess the feasibility of their use in respiratory drug delivery applications. The applicability of the new spray drying method to longer-chain phospholipids with adjusted spray drying temperatures was also evaluated.

RESULTS

Highly rugose DSPC lipid particles were produced via spray drying with good manufacturability. A feedstock temperature close to, and an outlet temperature lower than, the main phase transition were identified as critical in producing particles with highly rugose surface features. High emitted dose and total lung dose showed promising aerosol performance of the produced particles for use as a drug loading platform for respiratory drug delivery. Two types of longer-chain lipid particles with higher main phase transition temperatures, 1,2-diarachidoyl-sn-glycero-3-phosphocholine (DAPC) and 1,2-dibehenoyl-sn-glycero-3-phosphocholine (22:0 PC), yielded similar rugose morphologies when spray dried at correspondingly higher processing temperatures.

CONCLUSIONS

Rugose lipid particles produced via spray drying from an aqueous suspension feedstock are promising as a formulation platform for respiratory drug delivery applications. The new technique can potentially produce rugose particles using various other lipids.

The Effect of a Local Injection of Flurbiprofen Ester Microspheres on Systemic Inflammatory Model Rats With a Closed Femoral Shaft Fracture

Background: Periarticular injections with a combination of local anesthetics, non-steroidal anti-inflammatory analgesics (NSAIDs), and epinephrine are becoming increasingly popular in the perioperative analgesia of artificial joint replacement. However, data on the efficacy and safety of local injection NSAIDs are still scarce. The purpose of this study was to investigate the efficacy and safety of a local injection of Flurbiprofen Ester Lipid microspheres into the inflammatory model of femoral shaft closed fractures in rats.

Methods: A systemic inflammatory model was induced in SD rats (60) by closed femoral shaft fracture; 12 non-fractured rats were used as the blank control group (group A). The systemic inflammation model of 60 rats was divided into 5 groups (12 in each group); Group B: intramuscular injectionof the same amount of normal saline at different time points as a negative control; Group C: intravenous injection of Flurbiprofen Ester microspheres (4.5 mg/kg) at different time points; Group D: intramuscular injection of Flurbiprofen Ester microspheres (2.25 mg/kg) at different time points; Group E: intramuscular injection of Flurbiprofen Ester microspheres (4.5 mg/kg) at different time points; Group F: intramuscular injection of Flurbiprofen Ester microspheres (9 mg/kg) at different time points. The behavioral test observed the behavior of the rats. Then, the inflammation factors of CRP, IL-6, COX-1, COX-2 and TNF-αby ELISA were recorded.

Results: Through the behavioral test it could be found that the effect of the intramuscular and intravenous injections of Flurbiprofen Ester microspheres was similar. Fracture rats with a local injection of Flurbiprofen Ester microspheres showed lower inflammation levels measured by COX-1, CRP, and TNF-α compared with the control group. Pathological sections at 24, 48, and 96 h after surgery did not display any local muscle necrosis at the local injection site. These findings suggested that a Flurbiprofen Ester microsphere muscular injection exhibited a similar effect to an intravenous injection.

Conclusion: The local injection of Flurbiprofen Ester microspheres significantly reduced the inflammatory response in fracture rats and did not increase the risk of muscle necrosis, suggesting its feasibility in local injection analgesia.

A Novel high throughput 96-well based Fluorimetric Method to Measure Amikacin in Pharmaceutical Formulations: Development using Response Surface Methodology

An aminoglycoside antibiotic, amikacin, is used to treat severe and recurring bacterial infections. Due to the absence of a chromophore, however, amikacin must be extensively derivatized before being quantified, both in analytical and bioanalytical samples. In this study, for the first time, we developed a simple and sensitive method for measuring amikacin sulfate by spectrofluorimetry using a 96-well plate reader, based on the design of the experiment's approach. To develop a robust and reproducible spectrofluorimetric method, the influence of essential attributes, namely pH of the buffer, heating temperature, and concentration of reagents, were evaluated by univariate analysis followed by multivariate analysis (central composite design). ICH guidelines were used to validate the optimized method. The developed technique is linear from 1.9 to 10 μg/mL with a regression coefficient of 0.9991. The detection and quantification limits were 0.649 μg/mL and 1.9 μg/mL, respectively. For the developed method, both intra- and inter-day precision (%RSD) were below 5%. Using the method, amikacin concentrations were quantified in prepared amikacin liposomes and commercial formulations of Amicin®. The developed method greatly reduces sample volume and is a rapid, high throughput microplate-based fluorescence approach for the convenient and cost-effective measurement of amikacin in pharmaceutical formulations. In comparison to previously published approaches, the suggested method allowed for quick analysis of a high number of samples in a short amount of time (96 samples in 125 seconds), resulting in an average duration of analysis of 1.3 seconds per sample.

Distribution of Drug Substances in Solid Lipid Microparticles (SLM)—Methods of Analysis and Interpretation

The incorporation of drug substances into the matrix of solid lipid microparticles (SLM) is critical to providing effects such as prolonged release, taste masking, and protection of the labile API. Currently, a commonly used method of characterizing multi-compartment lipid systems, such as SLM, is to determine entrapment efficiency (EE) and drug loading (DL) parameters, but this is not sufficient for understanding the localization of API either in the core or on the surface of the microspheres. The main objective of the research was to study the distribution of API in an aqueous dispersion of SLM in order to distinguish between the API incorporated in the lipid matrix and localized in the superficial region (interphase) and to refer the obtained results to the EE and DL parameters. SLM dispersions (10–30% of the lipid) with four model drug substances, i.e., cyclosporine, clotrimazole, diclofenac sodium and hydrocortisone, were prepared and investigated. In the first stage, the experiments were designed to optimize the method of extracting the API fraction localized on the SLM surface by shaking the dispersions with methanol. The fraction dissolved in the aqueous phase was obtained by ultrafiltration of SLM dispersions. Total drug content and the concentration in the separated phases were determined by the HPLC method. The obtained results were compared with the EE and DL parameters. Selected SLM dispersions were tested both before and after thermal sterilization. Short-term shaking of SLM dispersion with methanol does not damage the lipid matrix and allows the API fraction localized on the SLM surface to be extracted, the result of which was the determination of API distribution between lipid matrix, interphase and aqueous phase. It was found that the majority of API represented by EE value was localized on the surface of SLM. Only for cyclosporine was the incorporation of drug molecules in the lipid core very effective (up to 48%), while for other drug substances only 1–21% was found in the lipid core of SLM. A clear influence of the sterilization process on the distribution of API within the microparticles was found. The presented studies showed that the characterization of multi-compartment SLM dispersions solely on the basis of EE and DL values, is insufficient. The proposed new distribution test method enables the localization of API to be demonstrated within the microspheres, with the quantitative characteristics of the drug fraction incorporated in the lipid matrix and the fraction associated with the surface of the lipid matrix. The proposed new method allows the influence of the sterilization process on the changes in the API distribution within the lipospheres to be evaluated. Such characteristics provide new opportunities for the development and use of this dosage form as a carrier providing prolonged release and other aforementioned advantages.

Franklin K, Díaz DD. A novel formulation design based on hetero-templated solid lipid microparticles to improve the solubility of anti-inflammatory piroxicam for oral administration

The aim of the work was to formulate piroxicam-loaded solid lipid microparticles (SLMs) using natural biodegradable lipids and to evaluate the in vitro and in vivo properties of the formulations.

Formulation, Optimization, In Vitro and In Vivo Evaluation of Saxagliptin-Loaded Lipospheres for an Improved Pharmacokinetic Behavior

The development and optimization of controlled release lipospheres (LS) from safe biocompatible behenic acid (BA) was performed for not only enhancing patient's compliance against highly prevailed chronic diabetes but also to vanquish the insufficiencies of traditional methods of drug delivery. The Box-Bhenken design (BBD) was utilized to statistically investigate the impact of formulation variables on percentage yield (Y ₁), entrapment efficiency (Y ₂), and SG-release (Y ₃) from saxagliptin- (SG-) loaded LS, and the chosen optimized LS were subjected to a comparative in vivo pharmacokinetic analysis against commercially available SG brand. The compatibility analysis performed by DSC and FTIR established a complete lack of interaction of formulation components with SG, while p-XRD suggested a mild transformation of crystalline drug to its amorphous form during encapsulation process. The spherical, free flowing smooth surface LS having zeta potential of -32 mV and size range of 11-20 μm were conveniently formulated. The obtained data for Y ₁ (30-80%), Y ₂ (30-70%), and Y ₃ (40-90%) showed a best fit with quadratic model. The pharmacokinetics analysis of LS showed a significantly decreased C _max of SG (75.63 ± 3.85) with a sufficiently elevated T _max (10.53 h) as compared to commercial brand of SG (99.66 ± 2.97 ng/mL and 3.55 ± 2.18 h). The achievement of greater bioavailability of SG was most probably attributed to higher level of half-life, mean residence time (MRT), and AUC_0-24 for SG released from LS. Conclusively, the novel approach of SG-loaded LS had successfully sustained the plasma SG level for a prolonged time without increasing C _max which would ultimately bring an effective management of chronic diabetes.

Spherical Cellulose Micro and Nanoparticles: A Review of Recent Developments and Applications

Cellulose, the most abundant natural polymer, is a versatile polysaccharide that is being exploited to manufacture innovative blends, composites, and hybrid materials in the form of membranes, films, coatings, hydrogels, and foams, as well as particles at the micro and nano scales. The application fields of cellulose micro and nanoparticles run the gamut from medicine, biology, and environment to electronics and energy. In fact, the number of studies dealing with sphere-shaped micro and nanoparticles based exclusively on cellulose (or its derivatives) or cellulose in combination with other molecules and macromolecules has been steadily increasing in the last five years. Hence, there is a clear need for an up-to-date narrative that gathers the latest advances on this research topic. So, the aim of this review is to portray some of the most recent and relevant developments on the use of cellulose to produce spherical micro- and nano-sized particles. An attempt was made to illustrate the present state of affairs in terms of the go-to strategies (e.g., emulsification processes, nanoprecipitation, microfluidics, and other assembly approaches) for the generation of sphere-shaped particles of cellulose and derivatives thereof. A concise description of the application fields of these cellulose-based spherical micro and nanoparticles is also presented.

Solid and Semisolid Innovative Formulations Containing Miconazole-Loaded Solid Lipid Microparticles to Promote Drug Entrapment into the Buccal Mucosa

The currently available antifungal therapy for oral candidiasis (OC) has various limitations restricting its clinical use, such as short retention time, suboptimal drug concentration and low patients compliance. These issues could be overcome using micro or nanotechnology. In particular, solid lipid microparticles (SLMs) resulted as a particularly promising penetration enhancer carrier for lipophilic drugs, such as the antifungal miconazole (MCZ). Based on these considerations, cetyl decanoate (here synthesized without the use of metal catalysis) was employed together with 1-hexadecanol to prepare MCZ-loaded SLMs. These resulted in a powder composed of 45–300 µm diameter solid spherical particles, able to load a high amount of MCZ in the amorphous form and characterized by a melting temperature range perfectly compatible with oromucosal administration (35–37 °C). Moreover, when compared to Daktarin^® 2% oral gel in ex vivo experiments, SLMs were able to increase up to three-fold MCZ accumulation into the porcine buccal mucosa. The prepared SLMs were then loaded into a buccal gel or a microcomposite mucoadhesive buccal film and evaluated in terms of MCZ permeation and/or accumulation into porcine buccal mucosa by using lower doses than the conventional dosage form. The promising results obtained highlighted an enhancement in terms of MCZ accumulation even at low doses. Furthermore, the prepared buccal film was eligible as stable, reproducible and also highly mucoadhesive. Therefore, the formulated SLMs represent a penetration enhancer vehicle suitable to reduce the dose of lipophilic drugs to be administered to achieve the desired therapeutic effects, as well as being able to be effectively embedded into easily administrable solid or semisolid dosage forms.

Breaking the barriers for the delivery of amikacin: Challenges, strategies, and opportunities

Hypodermic delivery of amikacin is a widely adopted treatment modality for severe infections, including bacterial septicemia, meningitis, intra-abdominal infections, burns, postoperative complications, and urinary tract infections in both paediatric and adult populations. In most instances, the course of treatment requires repeated bolus doses of amikacin, prolonged hospitalization, and the presence of a skilled healthcare worker for administration and continuous therapeutic monitoring to manage the severe adverse effects. Amikacin is hydrophilic and exhibits a short half-life, which further challenges the delivery of sufficient systemic concentrations when administered by the oral or transdermal route. In this purview, the exploitation of novel controlled and sustained release drug delivery platforms is warranted. Furthermore, it has been shown that novel delivery systems are capable of increasing the antibacterial activity of amikacin at lower doses when compared to the conventional formulations and also aid in overcoming the development of drug-resistance, which currently is a significant threat to the healthcare system worldwide. The current review presents a comprehensive overview of the developmental history of amikacin, the mechanism of action in virulent strains as well as the occurrence of resistance, and various emerging drug delivery solutions developed both by the academia and the industry. The examples outlined within the review provides significant pieces of evidence on novel amikacin formulations in the field of antimicrobial research paving the path for future therapeutic interventions that will result in improved clinical outcome.

Microparticle fabricated from a series of symmetrical lipids based on dihydroxyacetone form textured architectures

We report the synthesis of a series of symmetrical lipids composed of dihydroxyacetone and even‑carbon fatty acids (eight to sixteen carbons), both components of the human metabolome, and characterize their formulation into porous microparticles through spontaneous emulsification without the use of additional porogens. Lipid hydrolysis products were identified by ¹H NMR to validate lipid degradation into the parent metabolic synthons. Microparticle architecture, as determined by scanning electron microscopy, was lipid-length dependent, with shorter alkyl chains forming tight structures and longer alkyl chains forming larger pores with plate-like lipid architectures. In all cases, the lipids formed organized patterns, not irregular shapes. As a demonstration of the potential use of these solid lipid-based microparticles, the release kinetics of a model drug (piroxicam) was quantified showing that release was more greatly influenced by microparticle porosity, and hence surface area, than by hydrophobicity of the lipids.

Microfluidics-enabled particle engineering of monodisperse solid lipid microparticles with uniform drug loading and diverse solid-state outcomes

Lipids serve as excellent excipients for drug products. Solid lipid microparticles (SLMs) are relatively underexplored in drug delivery; these particles are conventionally prepared using processes yielding polydisperse size distributions, such as spray congealing or emulsification. In this paper, we demonstrate a microfluidics-enabled process for particle engineering of monodisperse solid lipid microparticles with size and content uniformity. To overcome low solubility, we use a volatile solvent to increase drug loading, making the drug-lipid solution a single phase, enabling identical drug loading across particles. We use microfluidic flow extrusion of the solution to generate uniform drug-loaded SLMs, substantially enhancing monodispersity. This method generalises across three drugs-ibuprofen, 5-methyl-2-[(2-nitrophenyl)amino]-3-thiophenecarbonitrile (ROY), and naproxen, and two lipids-beeswax and hard fat (Suppocire NAI 25A), forming particles of various solid states: amorphous naproxen in crystalline lipids, crystalline ROY in crystalline lipids, and a eutectic mixture of ibuprofen-hard fat. In vitro dissolution studies on the ibuprofen-hard fat SLMs reveal gradual release, fitting the Higuchi model with 50-65% drug released over 72 h. This work expands the drug particle engineering toolbox to enable the formulation of SLMs with high precision in particle size and drug loading. Moreover, the diverse solid-state outcomes enabled by our method makes it applicable to various drugs having different formulation requirements (crystalline/amorphous).

Development of solid lipid microparticles by melt-emulsification/spray-drying processes as carriers for pulmonary drug delivery

The aim of this study was to optimize the parameters of the complex melt-emulsification process coupled with the spray-drying, in order to maintain the balance between solid lipid microparticles (SLMs) powders aerodynamic performance and salbutamol sulfate release rate. Quality target product profile was identified and risk management and principal component analysis were used to guide formulation development. Obtained dry powders for inhalation (DPIs) were evaluated in terms of SLMs size distribution, morphology, true density, drug content, solid state characterization studies, in vitro aerosol performance and in vitro drug release. SLMs micrographs indicated spherical, porous particles. Selected powders showed satisfactory aerosol performance with a mean mass aerodynamic diameter of around 3 μm and acceptable fine particle fraction (FPF). Addition of trehalose positively affected SLMs aerodynamic properties. The results of in vitro dissolution testing indicated that salbutamol sulfate release from the tested SLMs formulations was modified, in comparison to the raw drug release. In conclusion, SLMs in a form of DPIs were successfully developed and numerous factors that affects SLMs properties were identified in this study. Further research is required for full understanding of each factor's influence on SLMs properties and optimization of DPIs with maximized FPFs.

Formulation, characterization and statistical optimization of enalapril-loaded lipospheres

Lipid-based polymers have been proved efficient drug carriers for overcoming the insufficiencies of conventional formulations. Ceresin wax was employed to improve permeability, oral bioavailability and patient compliance by preparing enalapril (EP)-loaded lipospheres with a simple solvent evaporation method. A Box–Behnken design with the proposed polynomial equations and quadratic model was applied to investigate and statistically validate the collective influence of formulation variables on lipospheres. Spherical smooth-surfaced lipospheres with an average size of 55 μm with excellent micromeritic properties were produced. Differential scanning calorimetry, X-ray diffraction and Fourier transmission infrared spectroscopy findings proved the lack of any possible interaction between formulation components. The zeta potential ranged from −5 to −20 mV, suggesting the significant stability of lipospheres. Responses such as percentage yield (29–68%), entrapment efficiency (21–53%) and drug release (42–93%) were found to be affected greatly by the concentrations of lipids and the surfactant, and the stirring speed. Reduced and sustained EP release from lipospheres may lower treatment cost and enhance hypertensive patients’ compliance.

Modeling of the Production of Lipid Microparticles Using PGSS® Technique

Solid lipid microparticles (SLMPs) are attractive carriers as delivery systems as they are stable, easy to manufacture and can provide controlled release of bioactive agents and increase their efficacy and/or safety. Particles from Gas-Saturated Solutions (PGSS^®) technique is a solvent-free technology to produce SLMPs, which involves the use of supercritical CO₂ (scCO₂) at mild pressures and temperatures for the melting of lipids and atomization into particles. The determination of the key processing variables is crucial in PGSS^® technique to obtain reliable and reproducible microparticles, therefore the modelling of SLMPs production process and variables control are of great interest to obtain quality therapeutic systems. In this work, the melting point depression of a commercial lipid (glyceryl monostearate, GMS) under compressed CO₂ was studied using view cell experiments. Based on an unconstrained D-optimal design for three variables (nozzle diameter, temperature and pressure), SLMPs were produced using the PGSS^® technique. The yield of production was registered and the particles characterized in terms of particle size distribution. Variable modeling was carried out using artificial neural networks and fuzzy logic integrated into neurofuzzy software. Modeling results highlight the main effect of temperature to tune the mean diameter SLMPs, whereas the pressure-nozzle diameter interaction is the main responsible in the SLMPs size distribution and in the PGSS^® production yield.

Lidocaine-Loaded Solid Lipid Microparticles (SLMPs) Produced from Gas-Saturated Solutions for Wound Applications

The delivery of bioactive agents using active wound dressings for the management of pain and infections offers improved performances in the treatment of wound complications. In this work, solid lipid microparticles (SLMPs) loaded with lidocaine hydrochloride (LID) were processed and the formulation was evaluated regarding its ability to deliver the drug at the wound site and through the skin barrier. The SLMPs of glyceryl monostearate (GMS) were prepared with different LID contents (0, 1, 2, 4, and 10 wt.%) using the solvent-free and one-step PGSS (Particles from Gas-Saturated Solutions) technique. PGSS exploits the use of supercritical CO2 (scCO2) as a plasticizer for lipids and as pressurizing agent for the atomization of particles. The SLMPs were characterized in terms of shape, size, and morphology (SEM), physicochemical properties (ATR-IR, XRD), and drug content and release behavior. An in vitro test for the evaluation of the influence of the wound environment on the LID release rate from SLMPs was studied using different bioengineered human skin substitutes obtained by 3D-bioprinting. Finally, the antimicrobial activity of the SLMPs was evaluated against three relevant bacteria in wound infections (Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa). SLMPs processed with 10 wt.% of LID showed a remarkable performance to provide effective doses for pain relief and preventive infection effects.

Analytical Techniques for the Assessment of Drug-Lipid Interactions and the Active Substance Distribution in Liquid Dispersions of Solid Lipid Microparticles (SLM) Produced de novo and Reconstituted from Spray-Dried Powders

Solid lipid microparticles (SLM) can be presented as liquid suspension or spray-dried powder. The main challenge in SLM technology is to precisely determine the location of the active substance (API) in the different compartments of the formulation and its changes during SLM processing. Therefore, the purpose of the research was to assess the distribution of the API and to investigate the nature of the API-lipid interaction when the formulation was subjected to spray drying, with an indication of the most suitable techniques for this purpose. SLM were prepared with two various lipids (Compritol or stearic acid) and two model APIs: cyclosporine (0.1% and 1% w/w) and spironolactone (0.1% and 0.5% w/w). Physicochemical characterizations of the formulations, before and after spray drying, were performed by differential scanning calorimetry (DSC), atomic force microscopy (AFM), Raman spectroscopy and nuclear magnetic resonance (NMR). The API distribution between the SLM matrix, SLM surface and the aqueous phase was determined, and the release study was performed. It was demonstrated that, in general, the spray drying did not affect the drug release and drug distribution; however, some changes were observed in the SLM with Compritol and when the API concentration was lower. Only in the SLM with stearic acid was a change in the DSC curves noted. Measurements with the AFM technique proved to be a useful method for detecting differences in the surface properties between the placebo and API-loaded SLM, while the Raman spectroscopy did not show such evident differences.

Lipospheres for Simultaneous Controlled Release and Improved Pharmacokinetic Profiles of Saxagliptin-Enalapril: Formulation, Optimization, and Comparative In Vitro-In Vivo Evaluation

The current study aims at formulating and optimizing lipospheres (LS) by the Box-Behnken design (BBD) from safe biodegradable carnauba wax (CW) to co-administer saxagliptin (SG) and enalapril (EP) for co-existing chronic hypertensive diabetes in order to overcome inadequacies of conventional modes of drug administration. Optimized liposphere formulation (OLF) was selected by a numerical optimization procedure and a comparative in vivo pharmacokinetic study of OLF and commercial brands was also performed. Discrete, free-flowing, spherical, smooth-surface LS having a size range of 5-10 μm and zeta potential of - 20 to - 30 mV were successfully formulated. Compatibility studies by FTIR and DSC proved the lack of interaction of components while XRD suggested the transformation of crystalline drugs to amorphous form. Outcomes of dependent optimizing variables like percentage yield (30-90%), EP-release (32-92%), and SG-release (28-95%) followed a polynomial quadratic model. Pharmacokinetics studies indicated a significantly lower C_max of EP (125.22 ± 6.32) and SG (75.63 ± 3.85) and higher mean T_max values (9.4 h for EP and 10.73 h for SG) from OLF in comparison with reference brands of EP (257.54 ± 8.23 ng/mL) and SG (393.66 ± 2.97 ng/mL). Additionally, a potential rise in half-life and MRT of SG and EP was achieved reaching approximately 2- to 3-fold higher than noted for reference brands. Importantly, the enhanced T_max and AUC_0-24 specified the achievement of enhanced bioavailability of both drugs from LS. Consequently, such an innovative approach could not only control drug release in both in vitro and in vivo analyses but also maintain plasma drug concentration for a longer time without maximizing C_max leading towards effective management of chronic illnesses.

Spray congealed solid lipid microparticles as a sustained release delivery system for Gonadorelin [6-D-Phe]: Production, optimization and in vitro release behavior

Sustained release lipid microparticles for a potential veterinary application were produced by the means of spray congealing using saturated triglycerides with respective surfactants. The spray congealing process was optimized using unloaded and loaded microparticles, revealing the highest impact of the spray flow on material loss. Yield could be optimized by increasing the spray flow as well as a reduction of the melt temperature from 90 to 75 °C. For the delivery system developed in this study, a release of around 15 days was targeted. The release profile was in first hand determined with the use of model substances (aspartame and tryptophan), before incorporating the decapeptide Gonadorelin [6-D-Phe]. Release could be controlled between 2 and 28 d, which was dependent on stability of microparticles upon incubation, type and concentration of emulsifier, as well as the used triglyceride. Differential scanning calorimetry and X-ray powder diffraction confirmed the crystallization behavior of C14 and C16-triglycerides in combination with various emulsifiers in different modification without impact on release.

Antibacterial PEGylated Solid Lipid Microparticles for Cosmeceutical Purpose: Formulation, Characterization, and Efficacy Evaluation

The development of efficacious means of delivering antioxidant polyphenols from natural sources for the treatment of skin diseases is of great interest for many cosmetic and pharmaceutical companies. Resveratrol (RSV) and Limonene (LIM) have been shown to possess good anti-inflammatory and antibacterial properties against Staphylococcus aureus infections responsible for many skin disorders, such as acne vulgaris. In this study, solid lipid microparticles are designed as composite vehicles capable of encapsulating a high amount of trans-RSV and enhancing its absorption through the stratum corneum. A microparticulate system based on mixture of PEGylate lipids, long-chain alcohols and LIM is able to entrap RSV in an amorphous state, increasing its half-life and avoiding inactivation due to isomerization phenomena, which represents the main drawback in topical formulations. Particles have been characterized in term of shape, size distribution and drug loading. Antimicrobial tests against S. aureus have highlighted that empty microspheres possess per se antimicrobial activity, which is enhanced by the presence of LIM, demonstrating that they can represent an interesting bactericide vehicle for RSV administration on the skin.

Anti-Inflammatory and Gastroprotective Properties of Aspirin - Entrapped Solid Lipid Microparticles

Background: Aspirin is a nonsteroidal anti-inflammatory drug that is very effective in the treatment of inflammation and other health conditions, however, it causes gastric irritation. Recently, researchers have developed patents (US9757529, 2019) of inhalable aspirin for rapid absorption and circumvention of gastric irritation.

Objective: The aim of this work was to formulate aspirin-loaded lipid based formulation in order to enhance oral bioavailability and inhibit gastric irritation.

Methods: This solid lipid microparticles loaded with aspirin (SLM) was formulated by a modified cold homogenization-solvent evaporation method. In vitro studies such as in vitro drug release, particle size, Encapsulation Efficiency (EE), micromeritic properties and loading capacity were carried out. Pharmacodynamics studies such as anti-inflammatory and ulcerative properties of the SLM were also carried out in Wistar rats.

Results: The results showed that aspirin entrapped SLM exhibited the highest EE of 72% and particle size range of 7.60 + 0.141µm to 20.25 + 0.070µm. Formulations had about 55% drug release at 6h in simulated intestinal fluid pH 6.8.The formulations had good flowability that could facilitate filling into hard gelatin capsule shells. The SLM exhibited 100% gastroprotection against aspirin-induced ulcers (p < 0.05). The percentage of anti-inflammatory activities also showed that aspirin-entrapped SLM had 78% oedema inhibition at 7h, while the reference had 68% inhibition at 7h.

Conclusion: Aspirin-entrapped SLM showed good sustained-release properties, enhanced anti-inflammatory properties and total gastric protection from aspirin-induced ulcers and could be used as once-daily oral aspirin.

Therapeutic Strategies for Erectile Dysfunction With Emphasis on Recent Approaches in Nanomedicine

This review addressed erectile dysfunction, regarding pathophysiology and therapeutic strategies. The line of treatment includes phosphodiesterase type-5 inhibitors and other types of therapy like topical and stem-cell transplant. Scientific literature was assessed to investigate the impact of nanotechnology on erectile dysfunction therapy. Various nanotechnology approaches were applied, like vesicular systems, lipid-based carriers, nanocrystals, dendrimers, liquid crystalline systems and nanoemulsions. Smart nano-systems can alter the landscape of the modern pharmaceutical industry by re- investigation of pharmaceutically suboptimal but biologically active entities for treatment of erectile dysfunction which were previously considered undeveloped.

Spray Congealing: An Emerging Technology to Prepare Solid Dispersions with Enhanced Oral Bioavailability of Poorly Water Soluble Drugs

The low and variable oral bioavailability of poorly water soluble drugs remains a major concern for the pharmaceutical industry. Spray congealing is an emerging technology for the production of solid dispersion to enhance the bioavailability of poorly soluble drugs by using low-melting hydrophilic excipients. The main advantages are the absence of solvents and the possibility to obtain spherical free-flowing microparticles (MPs) by a relatively inexpensive, simple, and one-step process. This review aims to fully describe the composition, structure, physico-chemical properties, and characterization techniques of spray congealed-formulations. Moreover, the influence of these properties on the MPs performance in terms of solubility and dissolution enhancement are examined. Following, an overview of the different spray congealed systems developed to increase the oral drug bioavailability is provided, with a focus on the mechanisms underpinning the bioavailability enhancement. Finally, this work gives specific insights on the main factors to be considered for the rational formulation, manufacturing, and characterization of spray congealed solid dispersions.

Nanocarriers and Microcarriers for Enhancing the UV Protection of Sunscreens: An Overview

This review addresses a major question of importance to pharmaceutical scientists: how can novel drug delivery systems play a role in maximizing the UV protection of sunscreens? Because more and more people are being diagnosed with skin cancer each year than all other cancers combined, adequate sun protective measures are pivotal. In this context, the present review is to give an up-to-date overview on the different nanocarrier systems that have been explored so far for encapsulating different types of UV filters present on the market. The aim of these carrier systems is to prevent skin penetration and to enhance the photoprotective potential of sunscreen actives. For each supramolecular system, a brief description along with the studies, achievements, and pitfalls, on the type of UV actives inside them, ranging from classical UV filters to new generation of UV actives is given. A brief overview of UV filters encapsulated in microcarriers is also discussed.

Effects of Drug Particle Size and Lipid Additives on Drug Release from Paraffin Wax Formulations Prepared by Spray Congealing Technique

Paraffin wax is a hydrophobic meltable material that can be suitably used in spray congealing to develop drug-loaded microparticles for sustained release, taste-masking or stability enhancement of drugs. However, these functional properties may be impaired if the drug particles are not completely embedded. Moreover, highly viscous melts are unsuitable for spray dispersion. In this study, the effects of drug particle size and lipid additives, namely stearic acid (SA), cetyl alcohol (CA) and cetyl esters (CE), on melt viscosity and extent of drug particles embedment were investigated. Spray congealing was conducted on the formulations, and the resultant microparticles were analysed for their size, drug content, extent of drug particles embedment and drug release. The melt viscosity increased with smaller solid inclusions while lipid additives decreased the viscosity to varying extents. The spray-congealed microparticle size was largely dependent on the viscosity. The addition of lipid additives to paraffin wax enabled more complete embedment of the drug particles. CA produced microparticles with the lowest drug release, followed by SA and CE. The addition of CA and CE enhanced the drug release and showed potential for taste-masking. Judicious choice of drug particle size and matrix materials is important for successful spray congealing to produce microparticles with the desired characteristics.

Spray congealing: a versatile technology for advanced drug-delivery systems

Spray congealing is a low cost, simple and versatile method to produce microparticles without the use of organic or aqueous solvent. This review provides a detailed picture of the pharmaceutical applications of this technology, with an overview of the spray-congealed-based drug-delivery systems. First, the basic principles and equipment of spray congealing technology are presented. Then, representative examples of the drug-delivery systems are examined and critically discussed. Emphasis is given on the role of formulation variables, together with practical considerations for formulation design. In addition, the current status of the industrial applications of this technology within the pharmaceutical field is examined. The final part points out benefits, limitations and future perspectives of this technology in drug delivery.

Green Formulation of Triglyceride/Phospholipid-Based Nanocarriers as a Novel Vehicle for Oral Coenzyme Q10 Delivery

This study was aimed to develop a novel nanocarrier for coenzyme Q10 (CoQ10) by a green process that prevented the use of surfactants and organic solvents. Triglyceride/phospholipid-based nanocarriers were developed through high-pressure homogenization (an industrial feasible process), and a 2^5-1 fractional factorial design was adopted to assess the influences of formulation variables on the considered responses, including vesicle size, entrapment efficiency, loading capacity, and solubility of the vehicles in simulated gastrointestinal fluids. The optimized formulation was further in-depth characterized in terms of morphology, release behavior, biocompatibility (Caco-2 cell cytotoxicity and histological examination), thermal behavior, and Fourier transform infrared analysis. Optimal nanocarriers were found to have mean particle size of 75 nm, narrow particle distribution, and CoQ10 entrapment of 95%. The optimized formulation was stable upon incubation in simulated gastrointestinal fluids without considerable leakage of cargo, which was in agreement with their sustained release behavior. Microscopic observations also confirmed nanosized nature of the vesicles and revealed their spherical shape. Moreover, toxicity evaluations at the cellular and tissue levels revealed their nontoxic nature. In conclusion, triglyceride/phospholipid-based nanocarriers proved to be a green safe vehicle for delivery of CoQ10 with industrial-scale production capability and could provide a new horizon for delivery of hydrophobic nutraceuticals. PRACTICAL APPLICATION: Green nanostructure formulation approaches have recently gained tremendous attraction for their safe profile especially when it comes to supplements, which are generally recommended for daily use. However, their sufficient association with cargoes and industrial-scale production have remained considerable challenges. This study focuses on the development of lipid-based nanocarriers for CoQ10 by an industrial feasible process that prevents the use of any surfactants or organic solvents.

Skin delivery of resveratrol encapsulated lipidic formulation for melanoma chemoprevention

Objective: An unmet need for patient friendly products can be achieved with novel, biocompatible lipidic formulations which encapsulate and prolong release of medicaments. The aim of this study was to develop a commercially scalable resveratrol-loaded solid-lipid microparticulate (SLM) topical gel for melanoma chemoprevention. Methods: Preformulation studies were conducted and drug-excipient interactions examined using infra-red spectroscopy and differential scanning calorimetry (DSC). Resveratrol-loaded SLM topical gel was prepared and evaluated by in vitro and in vivo parameters. Results: Spherical microparticles of 2.98 μm average size were obtained and DSC thermograms provide evidence of trans-resveratrol encapsulation. In vitro and ex vivo drug diffusion studies revealed sustained release profiles. Optimised SLM gel provides optimum antioxidant, tyrosinase inhibition, cytotoxicity in B16F10 melanoma cell line and apoptosis efficacy. In vivo studies on C57BL mice exhibit significant tumour reduction. Conclusion: Promising role of trans-resveratrol-loaded SLM topical gel in melanoma chemoprevention is proven.