Functional performance, maximal strength, and power characteristics in isometric and dynamic actions of lower extremities in soccer players

The isometric and isokinetic knee extension and flexion muscle strength profile of elite soccer players

BACKGROUND

This study aimed to further complete normative data sets for the strength profile of the thigh in soccer players by performing isometric and isokinetic measurements in a large sample per player position.

METHODS

In total, 364 soccer players were divided into subgroups according to their pitch position. All players performed isometric and isokinetic strength measurements during active competition period using an isokinetic dynamometer (System 3, Biodex®, ENRAF-NONIUS, New York, USA).

RESULTS

Isokinetic strength of m. Quadriceps was significantly (p = 0.023) higher in strikers compared to central midfielders in both the dominant (+ 9%) and the non-dominant (+ 4%) leg. No further differences were found in isometric or isokinetic strength per playing positions.

CONCLUSIONS

We have shown that strength profiles do not differ between playing positions on the field. This is valuable information for elite soccer high performance coaches and medical staffs aiming to improve daily training efficiency and rehabilitation of their players.

The Use of Free Weight Squats in Sports: A Narrative Review-Squatting Movements, Adaptation, and Sports Performance: Physiological

ABSTRACT

Stone, MH, Hornsby, G, Mizuguchi, S, Sato, K, Gahreman, D, Duca, M, Carroll, K, Ramsey, MW, Stone, ME, and Haff, GG. The use of free weight squats in sports: a narrative review-squatting movements, adaptation, and sports performance: physiological. J Strength Cond Res 38(8): 1494-1508, 2024-The squat and its variants can provide numerous benefits including positively affecting sports performance and injury prevention, injury severity reduction, and rehabilitation. The positive benefits of squat are likely the result of training-induced neural alterations and mechanical and morphological adaptations in tendons, skeletal muscles, and bones, resulting in increased tissue stiffness and cross-sectional area (CSA). Although direct evidence is lacking, structural adaptations can also be expected to occur in ligaments. These adaptations are thought to beneficially increase force transmission and mechanical resistance (e.g., resistance to mechanical strain) and reduce the likelihood and severity of injuries. Adaptations such as these, also likely play an important role in rehabilitation, particularly for injuries that require restricted use or immobilization of body parts and thus lead to a consequential reduction in the CSA and alterations in the mechanical properties of tendons, skeletal muscles, and ligaments. Both volume and particularly intensity (e.g., levels of loading used) of training seem to be important for the mechanical and morphological adaptations for at least skeletal muscles, tendons, and bones. Therefore, the training intensity and volume used for the squat and its variations should progressively become greater while adhering to the concept of periodization and recognized training principles.

Effects of variable intensity and constant intensity flywheel resistance training programs on specific soccer players' performance

Resistance training programs play a crucial role in optimizing soccer performance. The aim of this study is to compare performance outcomes in sport-specific tasks after implementing two different flywheel resistance training (FRT) programs: variable intensity (VI) and constant intensity (CI). Seventeen (n = 17) amateur footballers were divided into VI and CI groups with the same training volume. For the VI group, a decrease in inertial load was implemented every four sessions, whereas the CI group maintained a constant load during the entire program. After different familiarization sessions and testing (sprint, change of direction, jump, one-repetition maximum and flywheel strength variables), ten sessions of FRT were performed over 5 weeks. Both groups showed similar improvements in the one-repetition maximum (p < 0.01) but the CI group had significant improvements in the 10-m sprint (p = 0.04; ES = 0.72), emphasizing the potential benefits of medium inertial loads to maximize power and specificity in sport tasks. However, no significant differences were observed in the countermovement jump, change of direction and 30-m sprint, possibly attributed to neuromuscular fatigue from a high-volume training schedule and friendly matches. The study highlights the importance of considering training load distribution in FRT programs. The findings emphasize the need for complementary training to maximize the jump and change of direction abilities and caution against high-volume training and friendly match scenarios. In conclusion, FRT programs, whether varying in intensity or not, can yield medium-term performance improvements for soccer players.

Plyometric Jump Training Effects on Maximal Strength in Soccer Players: A Systematic Review with Meta-analysis of Randomized-Controlled Studies

BACKGROUND

Maximal strength may contribute to soccer players' performance. Several resistance training modalities offer the potential to improve maximal strength. During recent years, a large number of plyometric jump training (PJT) studies showed evidence for maximal strength improvements in soccer players. However, a comprehensive summary of the available data is lacking.

OBJECTIVE

To examine the effects of PJT compared with active, passive or intervention controls on the maximal strength of soccer players, irrespective of age, sex or competitive level.

METHODS

To perform a systematic review with meta-analysis following PRISMA 2020. Three electronic databases (PubMed, Web of Science, and SCOPUS) were systematically searched. Studies published from inception until March 2023 were included. A PICOS approach was used to rate studies for eligibility. The PEDro scale was used to assess risk of bias. Meta-analyses were performed using the DerSimonian and Laird random-effects model if ≥ 3 studies were available. Moderator and sensitivity analyses were performed, and meta-regression was conducted when ≥ 10 studies were available for a given comparison. We rated the certainty of evidence using GRADE.

RESULTS

The search identified 13,029 documents, and from these 30 studies were eligible for the systematic review, and 27 for the meta-analyses. Overall, 1,274 soccer players aged 10.7-25.0 years participated in the included studies. Only one study recruited females. The PJT interventions lasted between 5 and 40 weeks (median = 8 weeks), with 1-3 weekly sessions. Compared to controls, PJT improved maximal dynamic strength (18 studies, 632 participants [7 females], aged 12.7-24.5 y; effect size [ES] = 0.43, 95% confidence interval [CI] = 0.08-0.78, p = 0.017, impact of statistical heterogeneity [I2] = 77.9%), isometric strength (7 studies; 245 participants, males, aged 11.1-22.5 y; ES = 0.58, 95% CI = 0.28-0.87, p < 0.001, I2 = 17.7%), and isokinetic peak torque (5 studies; 183 participants, males, aged 12.6-25.0 y; ES = 0.51, 95% CI = 0.22-0.80, p = 0.001, I2 = 0.0%). The PJT-induced maximal dynamic strength changes were independent of participants' age (median = 18.0 y), weeks of intervention (median = 8 weeks), and total number of training sessions (median = 16 sessions). The certainty of evidence was considered low to very low for the main analyses.

CONCLUSIONS

Interventions involving PJT are more effective to improve maximal strength in soccer players compared to control conditions involving traditional sport-specific training. Trial Registration The trial registration protocol was published on the Open Science Framework (OSF) platform in December 2022, with the following links to the project ( https://osf.io/rpxjk ) and to the registration ( https://osf.io/3ruyj ).

The magnitude of correlation between deadlift 1RM and jumping performance is sports dependent

Introduction

Based on the assumption of maximal strength as a basic ability, several studies show a high influence of maximum strength on jumping performance in several sport athletes. However, there is a wide range of correlations from r = 0.17-0.9 between squat 1RM and jumping performance in different sports. Additionally, there are only a few studies investigating the influence of deadlift one repetition maximum (1RM) on jumping performance. Thus, this study aimed to investigate the correlations between 1RM in the deadlift on jumping performance using the countermovement jump height (CMJ) and squat jump height (SJ) considering different sports.

Methods

103 athletes with experience in the deadlift from soccer, basketball, American football, powerlifting as well as participants from different sports without any deadlift experience (control group) were included to this study.

Results

Overall statistics showed a significant moderate influence of deadlift 1RM (r = 0.301-0.472) on jumping performance. However, subgroup analysis showed no significant correlation between deadlift 1RM and jumping performance in control participants, while moderate correlations could be detected in powerlifters (r = 0.34-0.39), soccer players (r = 0.437-0.46), American football players (0.584-0.62) and high correlations in basketball players (r = 0.809-0.848) showing significant influence of type of sport on correlations between deadlift maximum strength and jumping performance.

Discussion

Presented results underline movement velocity- and task specificity of strength training routines which is discussed in the light of the respective sports.

Resistance Training Practices of Brazilian Olympic Sprint and Jump Coaches: Toward a Deeper Understanding of Their Choices and Insights (Part III)

In the final part of this three-article collection on the training strategies of Brazilian Olympic sprint and jump coaches, we provide a detailed description of the resistance training methods and exercises most commonly employed by these speed experts. Always with the objective of maximizing the sprint and jump capabilities of their athletes, these experienced coaches primarily utilize variable, eccentric, concentric, machine-based, isometric, complex, and isoinertial resistance training methods in their daily practices. Squats (in their different forms), Olympic weightlifting, ballistics, hip thrusts, lunges, calf raises, core exercises, leg curls, stiff-leg deadlifts, and leg extension are the most commonly prescribed exercises in their training programs, during both the preparatory and competitive periods. Therefore, the current manuscript comprehensively describes and examines these methods, with the additional aim of extrapolating their application to other sports, especially those where sprint speed is a key performance factor.

Short-Term Effects of Lower-Extremity Heavy Resistance versus High-Impact Plyometric Training on Neuromuscular Functional Performance of Professional Soccer Players

BACKGROUND

To compare the effects of short-term 8 week heavy-resistance or plyometric training protocols (HRT or PLY) incorporated into regular soccer practice on measures of neuromuscular functional performance in professional soccer players, a single-blind randomized controlled trial was conducted.

METHODS

Forty-seven participants aged 22.3 ± 3.52 years were assigned to three groups: HRT (n = 15), PLY (n = 15), and control (CON; n = 17). The HRT group performed 3 sets and 10 repetitions twice a week using 80% of their baseline 1-RM (weeks 1-3), followed by 8 repetitions at 85% 1-RM (weeks 4-6), and 6 repetitions at 90% 1-RM (weeks 7-8) of 6 lower-body strength exercises with a 1 min rest period between sets. The PLY protocol involved a preparatory phase (weeks 1-2), followed by two 3-week progressive periods (weeks 3-5 and weeks 6-8). The plyometric sessions consisted of four jump exercises/drills with progressively increasing number of sets and total number of foot contacts. The rest intervals between repetitions and sets were 15 and 90 s, respectively. Outcome measures included tests assessing 10 and 30 m speed (t10m and t30m), one-repetition maximum half-back squat (1-RM squat), isokinetic peak torques for the quadriceps and hamstring muscles (Qcon and Hcon), countermovement jump (CMJ), and squat jump (SJ).

RESULTS

Two-way ANOVA detected main effects of time and group×time interactions for all examined variables, except t30m, 1-RM, and relative 1-RM. Post hoc analyses revealed significant increases in the HRT group (t10m: 6.3%, t30m: 7.1%; absolute 1-RM: 29.6%; relative 1-RM: 30.3%, Qcon: 24.5%; Hcon: 14.4%; CMJ: 5.9%; SJ: 7.2%, all p < 0.001) and the PLY group (t10m: 3.1%; t30m: 4.1%; absolute 1-RM:19.1%; relative 1-RM: 20.3%; Qcon: 12.6%; Hcon: 8.7%; CMJ: 3.3%; SJ: 3.5%, all p < 0.001). HRT was superior compared to PLY in relative 1-RM, Qcon and Hcon (all p < 0.001). In addition, we found knee muscular strength imbalance in 70.5% of participants from the total sample (H/Q ratio < 60%). The HRT and PLY protocols resulted in improved neuromuscular functional performance compared to the regular soccer regime.

CONCLUSIONS

This study showed that during the pre-competitive season, additional HRT and PLY drills/exercises as a substitute for standard soccer training as part of a regular 90 min practice twice a week for 8 weeks, can produce acute physical performance-enhancing effects in professional soccer players.

Retrograde Training: Effects on Lower Body Strength and Power

Backward walking and running on positive grades (retrograde training) represents a closed kinetic chain exercise used by rehabilitation specialists for patellofemoral-related injuries. To date, no longitudinal studies exist to support it use. This investigation examined the effects of retrograde training on lower body strength and power in recreational athletes aged 18-50 years over 6 weeks. Thirty-seven subjects were divided into two groups. Group 1 performed retrograde training 3 days∙wk^-1 using treadmill speeds, grades and bout durations ranging from 1.6-4.9 m∙sec^-1, 2.5-27.5% and 10-30 seconds, respectively (RG, n=19). Group 2 was a control group who continued their normal training (CON, n=18). Pre- and posttests assessed a variety of unilateral and bilateral measures including vertical and linear jumps, one repetition maximum leg press strength, and positive and negative power during weighted squat jumping on a horizontal leg press with a force plate. RG improved significantly in all tests (P<0.05). Mean effect size (ES) of the relative improvement in a majority of tests revealed a moderate to very large ES of RG training (ES range: 0.77-2.71). We conclude retrograde training effective for improving lower body strength and power in recreational athletes.

Maximal strength measurement: A critical evaluation of common methods-a narrative review

Measuring maximal strength (MSt) is a very common performance diagnoses, especially in elite and competitive sports. The most popular procedure in test batteries is to test the one repetition maximum (1RM). Since testing maximum dynamic strength is very time consuming, it often suggested to use isometric testing conditions instead. This suggestion is based on the assumption that the high Pearson correlation coefficients of r ≥ 0.7 between isometric and dynamic conditions indicate that both tests would provide similar measures of MSt. However, calculating r provides information about the relationship between two parameters, but does not provide any statement about the agreement or concordance of two testing procedures. Hence, to assess replaceability, the concordance correlation coefficient (ρ c) and the Bland-Altman analysis including the mean absolute error (MAE) and the mean absolute percentage error (MAPE) seem to be more appropriate. Therefore, an exemplary model based on r = 0.55 showed ρ c = 0.53, A MAE of 413.58 N and a MAPE = 23.6% with a range of -1,000-800 N within 95% Confidence interval (95%CI), while r = 0.7 and 0.92 showed ρ c = 0.68 with a MAE = 304.51N/MAPE = 17.4% with a range of -750 N-600 N within a 95% CI and ρ c = 0.9 with a MAE = 139.99/MAPE = 7.1% with a range of -200-450 N within a 95% CI, respectively. This model illustrates the limited validity of correlation coefficients to evaluate the replaceability of two testing procedures. Interpretation and classification of ρ c, MAE and MAPE seem to depend on expected changes of the measured parameter. A MAPE of about 17% between two testing procedures can be assumed to be intolerably high.

Effects of Bilateral Extracephalic Transcranial Direct Current Stimulation on Lower Limb Kinetics in Countermovement Jumps

OBJECTIVE

Transcranial direct current stimulation (tDCS) is an effective method for improving sports/exercise performance in humans. However, studies examining the effects of tDCS on jumping performance have reported inconsistent findings, and there is a paucity of studies investigating the effects of tDCS on lower limb energy and kinetics in countermovement jumps (CMJs). Thus, we investigated the effects of tDCS on countermovement jump (CMJ) performance and analysed kinetic variations in the ankle, knee, and hip joints.

METHODS

In total, 15 healthy young participants randomly received anodal or sham bilateral stimulation of the primary motor cortex (M1). The bilateral tDCS (Bi-tDCS) montage used an intensity of 2 mA for a 20 min monophasic continuous current. Jump height, energy, and lower limb kinetic data in CMJs were collected at pre-stimulation (Pre), post-0 min (Post-0), and post-30 min (Post-30) using a motion capture system and two 3D force plates. Jump height, lower extremity energy, and kinetic variables in CMJs were analysed with two-way repeated-measures ANOVA.

RESULTS

(1) Compared to the baseline and sham conditions, the jump height increased except that at Post-30 relative to the sham condition, and the total net energy of lower limbs increased at Post-30 relative to the baseline. (2) Compared to the baseline, the ankle positive energy and net energy decreased in the sham condition; Compared to the baseline and values at Post-0, the maximum ankle torque at Post-30 decreased in both stimulation conditions. (3) The maximum knee power increased compared to the baseline and sham conditions. (4) Regardless of time points, the maximum hip torque in the tDCS condition was higher than it was in the sham condition.

CONCLUSION

Bi-tDCS is an effective method for improving jump height by modulating ankle and knee net energy. The net energy improvement of the lower extremities may be due to variation in the kinetic chain resulting from tDCS-enhanced knee exploration force and maximum hip strength in CMJs. The effects of Bi-tDCS gradually decrease.

Influence of maximal strength performance in front squat and deadlift on linear sprint and jump performance in male youth elite basketball players

Background

Strength and speed are two major factors that determine performance in basketball players especially sprinting, jumping and change of direction. This study examined relationships of maximal strength in the front squat and the deadlift with basketball-specific sprint and jump performance tests that are commonly used in test batteries of athletic diagnostics.

Materials and methods

In all, 42 youth male elite basketball players (age: 14.7 ± 2.4 years, age range: 13–18 years, height: 179.1 ± 15.3 cm, weight: 69.8 ± 19.2 kg) volunteered to take part in the present study. The one repetition maximum (1 RM) in the front squat and deadlift were used to determine maximum strength. Countermovement jump (CMJ) and standing long jump were evaluated to determine jump performance and 5, 10, and 20 m linear sprint as well as agility T‑test were performed to determine sprint performance. Pearson correlation analysis was used to assess the relationships between strength and jump and sprint performance.

Results

Strong positive correlations were found between maximal strength and jump heights (r = 0.85–0.91, p < 0.001) and strong negative correlations were determined between maximal strength and measured sprint times r = (−0.71 to −0.85, p < 0.001).

Conclusion

The measured maximal strength in the front squat and deadlift seem to be good predictors for basketball-specific jump and sprint performance. From this, it seems to be beneficial to include training of maximal strength via front squat and deadlift into training routines as well as performance diagnostics.

Despite Good Correlations, There Is No Exact Coincidence between Isometric and Dynamic Strength Measurements in Elite Youth Soccer Players

Speed strength performances are substantially dependent on maximum strength. Due to their importance, various methods have been utilized to measure maximum strength (e.g., isometric or dynamic) with discussed differences regarding transferability to sport-specific movements dependent upon the testing procedure. The aim of this study was to analyze whether maximum isometric force (MIF) during isometric back squats correlates with maximum strength measurements of the one repetition maximum (1RM) in the squat, with countermovement jump (CMJ) performance, and with drop jump (DJ) performances in elite youth soccer players (n = 16, 18.4 ± 1.5 [range: 17-23] years old). Additionally, concordance correlation coefficients (CCC, [ρc]) between isometric and dynamic measurements were calculated to verify whether one measurement can actually reproduce the results of the other. To improve comprehension, differences between isometric and dynamic testing values were illustrated by providing differences between both testing conditions. For this, the mean absolute error (MAE) and the mean absolute percentage error (MAPE) were calculated. To reach equality in scale, the 1RM measures were multiplicated by 9.81 to obtain a value of N. The 1RM demonstrated correlations of τ = |0.38| to |0.52| with SJ and CMJ performances, while MIF demonstrated correlations of τ = |0.21| to |0.32|. However, the correlations of both 1RM and MIF with the DJ reactive strength index (RSI = jump height /contact time) from different falling heights were of no statistical significance. The data showed significant correlations between both the absolute (τ = |0.54|) and the relative (τ = |0.40|) performances of 1RM and MIF, which were confirmed by CCC of ρc= |0.56| to |0.66|, respectively. Furthermore, the MAE and MAPE showed values of 2080.87 N and 67.4%, respectively. The data in this study show that, despite good correlations, there is no exact coincidence between isometric and dynamic strength measurements. Accordingly, both measurements may only represent an estimation of maximal strength capacity and cannot be substituted for each other. Therefore, maximal strength should be tested by using high similarity in the contraction condition, as it is used in the training process to counteract underestimation in strength because of unfamiliarity with the testing condition.

The Influence of Maximum Squatting Strength on Jump and Sprint Performance: A Cross-Sectional Analysis of 492 Youth Soccer Players

This study aims to analyze the influence of relative strength performance, determined by parallel back squats (REL SQ), on 30 m sprinting (LS) and on jumping performance (squat [SJ], countermovement [CMJ]) in a large sample (n = 492) of elite youth soccer players. The soccer players were divided into subgroups based on their strength performance: strength level 1 (0.0−0.5 REL SQ), strength level 2 (>0.5−1.0 REL SQ), strength level 3 (>1.0 to 1.5 REL SQ), strength level 4 (>1.5 to 2.0 REL SQ), and strength level 5 (>2.0 REL SQ). The results of this study show that REL SQ explains 45−53% (r = |0.67−0.73|) of the variance of SJ, CMJ, and LS for the total sample. Strength levels 2−4 showed similar coefficients of correlation in jumping performance (r = |0.42−0.55|) and strength levels 2 and 3 in sprint performance (r = |0.41|). The respective extreme strength levels showed lower coefficients of correlation with the sprinting and jumping performance variables (r = |0.11−0.29|). No coefficients could be calculated for strength level 5 because no athlete achieved an appropriate strength level (>2.0 REL SQ). The data from this study show a clear influence of REL SQ on sprint and jump performance, even in a large sample.

Strength Training in Swimming

This narrative review deals with the topic of strength training in swimming, which has been a controversial issue for decades. It is not only about the importance for the performance at start, turn and swim speed, but also about the question of how to design a strength training program. Different approaches are discussed in the literature, with two aspects in the foreground. On the one hand is the discussion about the optimal intensity in strength training and, on the other hand, is the question of how specific strength training should be designed. In addition to a summary of the current state of research regarding the importance of strength training for swimming, the article shows which physiological adaptations should be achieved in order to be able to increase performance in the long term. Furthermore, an attempt is made to explain why some training contents seem to be rather unsuitable when it comes to increasing strength as a basis for higher performance in the start, turn and clean swimming. Practical training consequences are then derived from this. Regardless of the athlete's performance development, preventive aspects should also be considered in the discussion. The article provides a critical overview of the abovementioned key issues. The most important points when designing a strength training program for swimming are a sufficiently high-load intensity to increase maximum strength, which in turn is the basis for power, year-round strength training, parallel to swim training and working on the transfer of acquired strength skills in swim training, and not through supposedly specific strength training exercises on land or in the water.

Effects of plyometric and whole-body vibration on physical performance in collegiate basketball players: a crossover randomized trial

While many studies suggested the isolated effects of plyometric and whole-body vibration exercises on physical performance variables, only few studies have compared the acute effects of plyometric and whole-body vibration on the occurrence of post-activation potentiation and the resultant improvements in performance. Therefore, we aimed to compare the acute effects of plyometric exercises and whole-body vibration training on physical performance in collegiate basketball players. Twenty-four collegiate male basketball players (age 20.8 ± 2.02 years, height 1.79 ± 0.7 m, and weight 71.2 ± 7.6 kg) participated in this randomized crossover study. Subjects were received both plyometric and whole-body vibration exercises after a 48-h washed-out period. Countermovement Jump height, sprint, and agility time were measured at baseline, 4- and 12-min post-plyometric, and whole-body vibration exercises. The result suggests a positive effect of both the plyometric and whole-body vibration exercises on countermovement jump and agility time (p = 0.001). While the countermovement jump height and agility were higher in the plyometric group (mean difference 1.60 cm and 0.16 s, respectively), the sprint performance was higher in the whole-body vibration group. However, these differences were statistically non-significant between the two groups (p > 0.05). This study suggests that both plyometric and whole-body vibration exercises may improve post-activation potentiation, which leads to better physical performance.

Trial registration CTRI/2019/05/019059. Registered with the Clinical trials registry, India on 10/05/2019. http://ctri.nic.in/Clinicaltrials/advsearch.php.

Measures of Strength and Jump Performance Can Predict 30-m Sprint Time in Rugby Union Players

ABSTRACT

Furlong, L-AM, Harrison, AJ, and Jensen, RL. Measures of strength and jump performance can predict 30-m sprint time in Rugby Union players. J Strength Cond Res 35(9): 2579-2583, 2021-Performance and fitness monitoring in Rugby Union often include jumping, sprinting, and strength tests, but repeatability of and relationships between these measures are unclear. The level of interindividual variability in these relationships and their sprint time predictive capabilities are also unknown. This study examined the reliability of, and relationship between, countermovement (CMJJH), squat (SJJH), and rebound (RBJJH) jump heights, rebound jump contact time (RBJCT), estimated 1 repetition maximum back squat relative to body mass (SQBM), and reactive strength index (RSI) to 30-m sprint time of subelite, semiprofessional Rugby Union players. Measurement reliability was very good, with high average intraclass correlation coefficients (≥0.9) and low coefficient of variation (<10.1%). All variables were significantly (p < 0.01) correlated to each other (r > 0.575), except for SQBM (only related to CMJJH, r = 0.621) and RBJCT (only related to RSI, r = -0.727). SJJH and SQBM were the strongest and most consistent predictors of time to 30 m (R = 0.754 ± 0.081; SEE = 0.166 ± 0.025), but variability in SEE magnitude was observed across the group during bootstrapping. Cross-validation showed a mean difference between actual and predicted 30 m times equivalent to 0.22% of the group average time to 30 m. These results support the importance of multiple aspects of fitness training in Rugby Union players for improving performance in short-duration sprinting activities, but highlight the individual nature of their relative importance. Measures of strength and power can be used to predict short sprint performance by the strength and conditioning professional.

Optimizing the Explosive Force of the Elite Level Football-Tennis Players through Plyometric and Specific Exercises

The aim of the research was to implement an athletic program to improve the explosive force in order to optimize physical fitness at the level of elite football-tennis players and evaluate the progress made through specific tests using the Opto Jump. The research included 10 elite European and world-class players, on whom an experimental program was applied in order to improve the explosive force of the limbs in conditions of speed, endurance, and dynamic balance. Study tests: five vertical jumps on the spot, on the left/right leg; five back and forth jumps on the left/right leg; five left/right side jumps on the left/right leg; vertical jumps on both legs 60 s; BFS vertical jumps. For each test, the following parameters specific to the explosive force were statistically analyzed: contact time (s); flight time (s); jump height (cm), jump power (w/kg); RSI—Reactive Strength Index, defined as Height (m/s). In the study, the average value of the parameters specific to the jumps performed in each test was taken into account. During the study, the tests were performed and processed on the Opto Jump device and software. In all tests of the experiment monitored through Opto Jump, significant progress was made in the final test compared to the initial one, which demonstrates the efficiency of the physical training program implemented for the development of explosive force, with an impact on the sports performance of elite players. The most relevant results obtained for the left leg regarding the improvement of the explosive force of the lower limbs materialized in the jump height parameter was in the test of five vertical jumps on one leg on the spot, and for the right leg in the tests of: five back and forth jumps and five left/right side jumps. The most significant advances in the study were in the tests, in descending order of their weight: 60 s vertical jumps on both legs; five back-and-forth jumps and five left/right side jumps, five vertical jumps on one leg standing, and BFS vertical jumps.

Race Performance Prediction from the Physiological Profile in National Level Youth Cross-Country Cyclists

Cross-country mountain biking is an Olympic sport discipline with high popularity among elite and amateur cyclists. However, there is a scarcity of data regarding the key determinants of performance, particularly in young cross-country cyclists. The aim of this study was to examine the physiological profile of youth national-level cross-country cyclists and to determine those variables that were able to best predict the performance in an official race. Ten youth cross-country cyclists of a national team underwent a complete evaluation that included anthropometric assessments, laboratory tests to evaluate the wattage at blood lactate thresholds and at maximal oxygen uptake (PO_VO2max), and field tests to make an in-depth power profile of the athletes. The data obtained in the above-mentioned tests was analysed along with total and partial race times during a competition belonging to the Union Cycliste Internationale (UCI) calendar. In the present study, large and statistically significant correlations (r = -0.67 to -0.95, p ≤ 0.05) were found between maximal and submaximal indices of aerobic fitness and cycling performance, especially when they were normalised to body mass. A multiple regression analysis demonstrated that the wattage at 2 mmol/L, 4 mmol/L and PO_VO2max were able to explain 82% of the variance in total race time. In summary, the results of this study support the use of maximal and submaximal indices of aerobic power as predictors of performance in youth cross-country cyclists.

A novel adaptable isometric strength analysis and exercise development system design

In this study, a low-cost and adaptable isometric strength measurement and exercise development system are described. The implemented system consists of mechanical structure, force measurement sensor, electronic circuit, and computer software. Isometric-isotonic (via spring resistance) strength analysis and various exercise programs can be applied with the system. The developed system has a lower cost compared to its counterparts in the literature and has a structure that can be adapted to different machines and measuring methods. The operability and reliability of the isometric strength measurement and exercise development system have been proven by calibration tests.

Relationship Between Tennis Serve Velocity and Select Performance Measures

ABSTRACT

Hayes, MJ, Spits, DR, Watts, DG, and Kelly, VG. Relationship between tennis serve velocity and select performance measures. J Strength Cond Res 35(1): 190-197, 2021-The purpose of this study was to determine whether there was a relationship between tennis serve speed and isometric midthigh pull (IMTP) kinetic variables: countermovement jump (CMJ) height, shoulder internal and external rotation strength, and anthropometric measures in elite adolescent tennis players. Twenty-one elite junior tennis players from the Tennis Australia National Academy were recruited for this study (male, n = 12 and female, n = 9). Correlations between the performance variables and peak tennis serve speed were calculated using a Pearson's product-moment correlation coefficient. A significant positive correlation was found between peak serve speed and body height (r = 0.80, p < 0.01), IMTP peak force (r = 0.87, p < 0.01), CMJ height (r = 0.77, p ≤ 0.01), and impulse at 300 ms (r = 0.71, p ≤ 0.01). A significant, strong correlation was found between peak serve speed and impulse at 100 ms (r = 0.58, p ≤ 0.01), impulse at 200 ms (r = 0.64, p ≤ 0.01), internal rotation <90° (r = 0.63, p ≤ 0.01), and external rotation <90° (r = 0.63, p ≤ 0.01). Because of the significant positive correlations between IMTP variables, CMJ height and peak serve speed, strength and conditioning coaches with access to a force plate should consider using the IMTP to athletically profile athletes in regards to their strength, power, and injury risk.

Acute Physiological Responses to High-Intensity Resistance Circuit Training vs. Traditional Strength Training in Soccer Players

The aim of this study was to evaluate and compare the cardiorespiratory and metabolic responses induced by high-intensity resistance circuit-based (HRC) and traditional strength (TS) training protocols. Ten amateur soccer players reported to the laboratory on four occasions: (1) protocol familiarization and load determination; (2) maximal oxygen consumption test; (3) and (4) resistance training protocols (HRC and TS), completed in a cross-over randomized order. In both protocols, the same structure was used (two blocks of 3 sets × 3 exercises, separated by a 5-min rest), with only the time between consecutive exercises differing: TS (3 min) and HRC (~35 s, allowing 3 min of local recovery). To test for between-protocol differences, paired t-tests were applied. Results showed that oxygen consumption and heart rate during HRC were 75% and 39% higher than TS, respectively (p < 0.001). After the training sessions, blood lactate concentration at 1.5, 5 and 7 min and excess post-exercise oxygen consumption were higher in HRC. The respiratory exchange ratio was 6.7% greater during HRC, with no between-group differences found post-exercise. The energy cost of HRC was ~66% higher than TS. In conclusion, HRC training induces greater cardiorespiratory and metabolic responses in soccer players and thus may be a time-effective training strategy.

Relationships Between Measures of Functional and Isometric Lower Body Strength, Aerobic Capacity, Anaerobic Power, Sprint and Countermovement Jump Performance in Professional Soccer Players

The purpose of this study was to assess a wide range of physiological and performance variables and investigate whether and to what extent these variables are associated with each other in soccer. Twenty-five male soccer players (25.1 ± 4.56 years; body mass, 75.2 ± 5.92 kg; body height, 180.6 ± 5.45 cm) performed: 5- and 30-m sprints (T5m and T30m, respectively), 1-repetition-maximum (1RM) half squat, maximal voluntary isometric contraction (MVIC) of the knee extensors, countermovement jump (CMJ) to obtain vertical jump height (CMJ_height) and power output (CMJ_power), the 10-s Wingate Anaerobic Test (WAnT) to obtain peak power (P_max), and the 20-m multi-stage shuttle run test (MST) to evaluate aerobic capacity. 1RM, MVIC, and P_max were normalized to body mass. Large negative correlations were found between sprint times and 1RM half back squat/BM (r = -0.510 to -0.570, r² = 0.260–0.325, both p < 0.01) and P_max/BM (r = -0.501, r² = 0.251, p < 0.01). T30m most strongly and negatively correlated with CMJ_height (r = -0.744, r² = 0.554, p < 0.001). WAnT-determined P_max showed a very large correlation between absolute P_max and knee-extensor MVIC (r = 0.827, r² = 0.684, p < 0.001) and large correlations between absolute P_max and 1RM half squat (r = 0.674, r² = 0.454, p < 0.001) and CMJ_power (r = 0.579, r² = 0.335, p < 0.01). We also identified a large inverse relationship between CMJ_height and T30m (r = -0.744, r² = 0.554, p < 0.001) and large positive correlation between CMJ_height and MVIC/BM (r = 0.702, p < 0.001). The results demonstrate that elite soccer players with greater lower body strength (quantified by the MVIC of the knee extensor and the 1RM half squat) show better sprint and CMJ performance, suggesting the incorporation of soccer-specific resistance training to develop lower body musculature and therefore maximize sprinting ability. The higher correlation coefficients found between T30m and the physiological and athletic measures compared with T5m promote the use of this sprint distance when assessing performance. The use of relative measures (normalized to body mass) is advisable when comparing strength variables with sprint and CMJ performance or anaerobic power. Considering the correlations of WAnT-determined P_max versus CMJ_power, coaches should administer tests that assess jumping and linear sprint performance rather than the cycling-specific WAnT.

Familiarization and Reliability of the Isometric Knee Extension Test for Rapid Force Production Assessment

Despite the rising interest in the use of portable force sensors during isometric exercises to inform on neuromuscular performance, the design of practical field-based methods to obtain reliable measures is an ongoing challenge. We aim at identifying the intra-session and test-retest reliability of a rapid, isometric knee extension test to evaluate the maximal voluntary concentric force (MVC), rate of force development (RFD) and impulse following a field-based approach. On two occasions, 14 athletes unfamiliar with the test completed three sets of 2 s ballistic contractions (as fast and hard as possible) with 30 s rest. Raw and filtered data were collected in real time using a portable force sensor. RFD and impulse were highly reliability during “late” phases of the contraction (0–250 ms) since the first session (coefficient of variation (CV) < 9.8%). Earlier phases (0–150 ms) achieved a moderate reliability after one familiarization session (CV < 7.1%). Measures at 0–50 ms did not reach sufficient reliability (CV~14%). MVC was accurately assessed. Dominant limbs were not importantly altered by the familiarization. In opposite, non-dominant limbs showed large variations. New evidence is provided about the positive effects of a single familiarization session to improve the reliability the isometric knee extension test for rapid force production assessment. Coaches and practitioners may benefit of from these findings to conduct practical and reliable assessments of the rapid force production using a portable force sensor and a field-based approach.

The Relationship between Isometric Force-Time Characteristics and Dynamic Performance: A Systematic Review

The purpose of this article was to review the data on the relationship between multi-joint isometric strength test (IsoTest) force-time characteristics (peak force, rate of force development and impulse) and dynamic performance that is available in the current literature. Four electronic databases were searched using search terms related to IsoTest. Studies were considered eligible if they were original research studies that investigated the relationships between multi-joint IsoTest and performance of dynamic movements; published in peer-reviewed journals; had participants who were athletes or active individuals who participate in recreational sports or resistance training, with no restriction on sex; and had full text available. A total of 47 studies were selected. These studies showed significant small to large correlations between isometric bench press (IBP) force-time variables and upper body dynamic performances (r² = 0.221 to 0.608, p < 0.05) and significant small to very large correlation between isometric squat (ISqT) (r² = 0.085 to 0.746, p < 0.05) and isometric mid-thigh pull (IMTP) (r² = 0.120 to 0.941, p < 0.05) force-time variables with lower body dynamic performances. IsoTest force-time characteristics were shown to have small to very large correlations with dynamic performances of the upper and lower limbs as well as performance of sporting movements (r² = 0.118 to 0.700, p < 0.05). These data suggest that IsoTest force-time characteristics provide insights into the force production capability of athletes which give insight into dynamic performance capabilities.

Assessment of Lower Body and Abdominal Strength in Professional Soccer Players

The purpose of this study was to evaluate abdominal strength in professional soccer players and compare the findings to their lower body strength. An observational design was used to examine abdominal and lower body strength using two functional performance tests (a lower body isokinetic test and an isometric abdominal test, respectively). One hundred and thirty-two professional male soccer players from Cyprus’s first and second divisions participated in this study. Testing included three and twenty-five maximal concentric flexion and extension repetitions at angle speeds of 60°/s (degrees/second) and 300°/s, respectively. On a separate occasion, participants completed two trials on an isometric device (ABTEST Gen. 3 system) for evaluation of abdominal strength. At both isokinetic speeds of 300°/s and 60°/s, abdominal strength had low to moderate significant correlations (p < .05) with quadriceps and hamstring strength. Coefficients of determination (R2) demonstrated that the variability in isokinetic variables accounted for only 14-16% of the variability of abdominal strength. Abdominal strength appears to be high in professional soccer players, but is not dependent on the sports level and/or a playing position. The results of this study demonstrate that abdominal strength and knee joint strength need to be evaluated separately.

Efficacies of ultrasound and a handheld dynamometer to predict one-repetition maximum

[Purpose] It is important to accurately measure one-repetition maximum to determine the training load and number of repetitions. However, huge and expensive equipment, such as a torque machine and/or dynamometer, is needed to measure one-repetition maximum. Therefore, a more accessible and affordable method has been developed to predict one-repetition maximum. In this study, we aimed to investigate whether one-repetition maximum of the knee extensor could be predicted more accurately with a combination of muscle strength, measured using a handheld dynamometer, muscle thickness, and thigh circumference. [Participants and Methods] Participants were sixty-four non-athletic healthy adult volunteers (33 males and 31 females). Muscle strength of the knee extensor measured using one-repetition maximum, maximal voluntary isometric contraction measured using a handheld dynamometer, muscle thickness of the quadriceps and/or thigh circumference measured on ultrasonography. [Results] The stepwise regression analysis revealed that body mass, gender, muscle thickness at 15 cm above the patella, and maximal voluntary isometric contraction were the significant and independent determinants (R²=0.813). [Conclusion] One-repetition maximum could be predicted more accurately with a combination of maximal voluntary isometric contraction measured using a handheld dynamometer and muscle thickness.

Influence of Strength and Power Capacity on Change of Direction Speed and Deficit in Elite Team-Sport Athletes

The aim of the present study was to investigate the influence of maximum strength and power levels on change of direction (COD) ability and deficit in elite soccer and rugby players. Seventy-eight elite athletes (soccer, n = 46; rugby, n = 32) performed the following assessments: squat and countermovement jumps (SJ and CMJ), 1 repetition-maximum in the half-squat exercise (HS 1RM), peak power (PP) in the jump-squat exercise, and 20-m linear sprint and Zigzag COD tests. Utilizing the median split analysis, athletes were divided into two groups according to their HS 1RM and PP JS (e.g., higher and lower HS 1RM and higher and lower PP JS). The magnitude-based inference method was used to analyze the differences between groups in the physical performance tests. Athletes in the high strength and power groups outperformed their weaker and less powerful counterparts in all speed and power measurements (i.e., 5-, 10-, and 20-m sprint velocity, Zigzag COD speed, and CMJ and SJ height). In contrast, stronger and more powerful athletes displayed greater COD deficits. The present data indicate that players with superior strength-power capacity tend to be less efficient at changing direction, relative to maximum sprinting speed, despite being faster in linear trajectories. From these results, it appears that current strength and power training practices in team-sports are potentially not the “most appropriate” to increase the aptitude of a given athlete to efficiently utilize his/her neuromuscular abilities during COD maneuvers. Nevertheless, it remains unknown whether more multifaceted training programs are effective in decreasing COD deficits.

In-season in-field variable resistance training: effects on strength, power, and anthropometry of junior soccer players

BACKGROUND

Soccer players' leg muscular strength and power have been shown to be significant due to their association with soccer-specific performance including jumps, sprints, tackles and kicks. The aim of this study, therefore, was to examine the effects of an in-season in-field variable resistance training (VRT) program on strength, power, and anthropometry of junior soccer players.

METHODS

A team of male soccer players were randomly assigned into Experimental (N.=10) and Control groups (N.=10). The Control group performed 8 weeks of soccer training alone. The Experimental group performed squat VRT using chains in addition to soccer training. Measures before and after training included squat strength, countermovement jump, and anthropometric estimation of thigh muscle cross sectional area (CSA).

RESULTS

The VRT induced large improvements in absolute (34.45%; P=0.001; Cohen's d=1.78) and relative strength to thigh muscle CSA (21.53%; P=0.002; Cohen's d=1.04). Similarly, there were large (18.07%, P=0.007; Cohen's d=1.5) increases in jump height and medium gains in absolute peak power output (16.13%; P=0.009; Cohen's d=0.34) and relative peak power output to thigh muscle CSA (9.6%; P=0.002; Cohen's d=0.31). Further, there was a medium increase (5.9%, P=0.03; Cohen's d=0.36) in thigh muscle CSA. No significant changes were observed in the Control group.

CONCLUSIONS

In-season in-field biweekly squat VRT enhanced strength and power measures in junior soccer players.

Maximum acceleration performance of professional soccer players in linear sprints: Is there a direct connection with change-of-direction ability?

The purpose of this study was to examine the selective influences of the maximum acceleration capability on change of direction (COD) speed, COD deficit, linear sprint speed, sprint momentum, and loaded and unloaded vertical jump performances in forty-nine male professional soccer players (24.3 ± 4.2 years; 75.4 ± 5.4 kg; 177.9 ± 6.4 cm). Soccer players performed the assessments in the following order: 1) squat and countermovement jumps; 2) 20-m sprinting speed test; 3) Zigzag COD ability test; and 4) bar-power outputs in the jump squat exercise. Athletes were divided, using a median split analysis, into two different groups according to their maximum acceleration rates from zero to 5-m (e.g., higher and lower ACC 0-5-m). Magnitude-based inference was used to compare the differences in the physical test results between "higher" and "lower" acceleration groups. A selective influence of the maximum acceleration ability on speed-power tests was observed, as the higher acceleration group demonstrated likely to almost certain higher performances than the lower acceleration group in all measurements (effect sizes varying from 0.66 [for sprint momentum in 20-m] to 2.39 [for sprint velocity in 5-m]). Conversely, the higher acceleration group demonstrated a higher COD deficit when compared to the lower acceleration group (ES = 0.55). This indicates compromised efficiency to perform COD maneuvers in this group of players. In summary, it was observed that soccer players with higher maximum acceleration rates are equally able to jump higher, sprint faster (over short distances), and achieve higher COD velocities than their slower counterparts. However, they appear to be less efficient at changing direction, which may be related to their reduced ability to deal with greater entry and exit velocities, or counterbalance the associated mechanical consequences (i.e., greater inertia) of being faster and more powerful.

Reliability and Validity of a Novel Trunk-Strength Assessment for High-Performance Sprint Flat-Water Kayakers

PURPOSE

To determine the reliability and validity of a novel trunk maximal isometric force assessment involving 7 different tasks with 200-m times for elite sprint flat-water kayakers.

METHODS

Ten elite sprint flat-water kayakers performed a series of maximal isometric voluntary contractions (MVCs) on 2 separate days to assess reliability. MVC force was assessed as the participants sat on a modified kayak ergometer and applied their maximal isometric force to a uniaxial load cell during 7 different tasks. The 7 tasks of interest were a seated trunk-forward flexion, bilateral (left and right) rotational pulls, bilateral rotational pushes, and a sport-specific bilateral kayak-stroke simulation. Twenty elite flat-water kayak athletes (10 male and 10 female) participated in the validity portion by completing the series of tasks in conjunction with a 200-m race.

RESULTS

MVC force values ranged from 84 to 800 N across all participants and all tasks. The average coefficient of variation of the 7 tasks ranged from 2.4% to 7.7%. Regression analysis showed Pearson correlations ranging from -.84 to -.22 for both absolute and relative values with 200-m performance times.

CONCLUSIONS

MVC force measured in each task was considered reliable as a small degree of variance between trials was found. The summation of the 7 trunk scores showed very strong correlations with on-water performance, indicating that this assessment is valid for elite sprint kayakers.

Countermovement Jump and Isokinetic Dynamometry as Measures of Rehabilitation Status After Anterior Cruciate Ligament Reconstruction

CONTEXT

  Despite an increase in the literature, few definitive guidelines are available to determine when an athlete has been fully rehabilitated after anterior cruciate ligament reconstruction (ACLR).

OBJECTIVE

  To examine countermovement jump and isokinetic dynamometry measures to (1) identify which measures can best distinguish between ACLR and control participants and (2) provide normative values for identified measures in young adult male multidirectional field-sport athletes.

DESIGN

  Cross-sectional study.

SETTING

  Orthopaedic hospital.

PATIENTS OR OTHER PARTICIPANTS

  Young adult male multidirectional field-sport athletes (n = 118) who had undergone unilateral patellar-tendon graft ACLR at least 6 months earlier and healthy male participants (n = 44) with no previous knee injury.

INTERVENTION(S)

  Single-legged countermovement jump (SL CMJ).

MAIN OUTCOME MEASURE(S)

  Three-dimensional biomechanical analysis of the SL CMJ and mean peak concentric knee-extension and -flexion torque using isokinetic dynamometry (ISO) were compared in the 2 groups. A stepwise logistic regression was carried out to identify the best predictors of ACLR- or control-group membership (SL CMJ height, limb symmetry index, peak power, joint power contribution, ISO peak torque, limb symmetry index variables).

RESULTS

  The control group differed strongly from the ACLR group in isokinetic knee-extension peak torque (d = -1.33), SL CMJ performance (d > 0.4), and limb symmetry measures in both ISO and jump outcomes (d > 1.1). The combination of measures from both ISO and SL CMJ identified group membership with an accuracy of 89%.

CONCLUSIONS

  Rehabilitation of ACLR patients may be complete when they achieve isokinetic knee-extension peak torque of 260% (±40%) body mass, SL CMJ performance of >17 cm (±4 cm), and reach-limb symmetry measures of >90% in both strength and jump outcomes. The outcomes in the control group can inform return-to-play criteria for young adult male multidirectional field-sport athletes after ACLR.

Methodological Considerations on the Relationship Between the 1,500-m Rowing Ergometer Performance and Vertical Jump in National-Level Adolescent Rowers

Maciejewski, H, Rahmani, A, Chorin, F, Lardy, J, Samozino, P, and Ratel, S. Methodological considerations on the relationship between the 1,500-m rowing ergometer performance and vertical jump in national-level adolescent rowers. J Strength Cond Res 33(11): 3000-3007, 2019-The purpose of this study was to investigate whether 3 different approaches for evaluating squat jump performance were correlated with rowing ergometer performance in elite adolescent rowers. Fourteen young male competitive rowers (15.3 ± 0.6 years), who took part in the French rowing national championships, performed a 1,500-m all-out rowing ergometer performance (P1500) and a squat jump (SJ) test. The performance in SJ was determined by calculating the jump height (HSJ in cm), a jump index (ISJ = HSJ·body mass·gravity, in J), and the mean power output (PSJ in W) from the Samozino et al.'s method. Furthermore, allometric modeling procedures were used to consider the importance of body mass (BM) in the relationships between P1500 and jump scores. P1500 was significantly correlated with HSJ (r = 0.29, p ≤ 0.05), ISJ (r = 0.72, p < 0.0001), and PSJ (r = 0.86, p < 0.0001). Furthermore, BM explained at least 96% of the relationships between SJ and rowing performances. However, the similarity between both allometric exponents for PSJ and P1500 (1.15 and 1.04, respectively) indicates that BM could influence jump and rowing ergometer performances at the same rate, and that PSJ could be the best correlate of P1500. Therefore, the calculation of power seems to be more relevant than HSJ and ISJ to (a) evaluate jump performance and (b) infer the capacity of adolescent rowers to perform 1,500-m all-out rowing ergometer performance, irrespective of their body mass. This could help coaches to improve their training program and potentially identify talented young rowers.

The Importance of Muscular Strength in Athletic Performance

This review discusses previous literature that has examined the influence of muscular strength on various factors associated with athletic performance and the benefits of achieving greater muscular strength. Greater muscular strength is strongly associated with improved force-time characteristics that contribute to an athlete's overall performance. Much research supports the notion that greater muscular strength can enhance the ability to perform general sport skills such as jumping, sprinting, and change of direction tasks. Further research indicates that stronger athletes produce superior performances during sport specific tasks. Greater muscular strength allows an individual to potentiate earlier and to a greater extent, but also decreases the risk of injury. Sport scientists and practitioners may monitor an individual's strength characteristics using isometric, dynamic, and reactive strength tests and variables. Relative strength may be classified into strength deficit, strength association, or strength reserve phases. The phase an individual falls into may directly affect their level of performance or training emphasis. Based on the extant literature, it appears that there may be no substitute for greater muscular strength when it comes to improving an individual's performance across a wide range of both general and sport specific skills while simultaneously reducing their risk of injury when performing these skills. Therefore, sport scientists and practitioners should implement long-term training strategies that promote the greatest muscular strength within the required context of each sport/event. Future research should examine how force-time characteristics, general and specific sport skills, potentiation ability, and injury rates change as individuals transition from certain standards or the suggested phases of strength to another.

Predictors of Linear and Multidirectional Acceleration in Elite Soccer Players

Jonathan, N, Russell, M, Shearer, D, Cook, CJ, and Kilduff, LP. Predictors of linear and multidirectional acceleration in elite soccer players. J Strength Cond Res 33(2): 514-522, 2019-Linear and multidirectional acceleration underpins success in professional soccer match play. However, the physical qualities that determine these performance indicators are poorly understood in elite players. English Premier League players (n = 26) performed isometric midthigh pulls (IMTPs), bilateral and unilateral drop jumps (from 40 and 20 cm, respectively), bilateral and unilateral countermovement jumps (CMJs), and assessments of linear (5, 10, and 20 m) and multidirectional (left and right preplanned and reactive) acceleration. Regression analyses highlighted that 21% of variance in 5-m sprint time (1.02 ± 0.07 seconds) was explained by relative peak power output (PPO) in bilateral CMJ (54.5 ± 5.3 W·kg). A 5.4 W·kg increase in CMJ predicted a 0.03-second decrease in 5-m sprint time (P = 0.02). For 10-m sprint time (1.72 ± 0.09 seconds), 44% of variance was explained by isometric relative peak force ([PF]; 30.4 ± 4.9 N·kg) and bilateral relative CMJ PPO (54.5 ± 5.3 W·kg). A 5.4 W·kg increase in CMJ predicted reduced 10-m sprint times by 0.04 seconds (P = 0.01). For 20-m sprint time (2.94 ± 0.11 seconds), 55% of the total variance was explained by isometric relative PF (30.4 ± 4.9 N·kg) and relative CMJ PPO (54.5 ± 5.3 W·kg). Increases of 5.4 W·kg in bilateral CMJ predicted an improvement of 20-m sprint time by 0.06 seconds (P = 0.002). Contributions were insignificant (P > 0.05) for preplanned and reactive multidirectional acceleration. Relativized indices, especially those related to force production during CMJ and IMTP tests, likely underpin linear but not multidirectional acceleration performance in professional soccer players. When linear acceleration is a training focus, practitioners should seek to monitor CMJ and IMTP test performance.

Mobility, proprioception, strength and FMS as predictors of injury in professional footballers

Background

The premise of this study was to investigate if anthropometric variables such as mobility, proprioception, strength and modified Functional Movement Screen (mFMS) could be used as primary indicators of injury risk in an English Championship division football team. This study focused on moderate injuries occurring in the lower extremities, during the 2014/2015 competitive season.

Methods

To differentiate between minor, moderate and severe injuries, this study classified moderate injuries as an injury with an average injury severity of 2–28 days. This study is composed of 4 individual investigations. Each variable was assessed against 2 groups: injured (n=6) and non-injured (n=10). The 2 groups were compiled from the first team, with the criteria that each participant of this study required: full preseason assessment and injury history for the time period, 1 July 2014 to 19 March 2015. A Mann-Whitney U test (0.05% significance) was applied to statistically analyse if each variable showed any variation across the 2 groups. Effect size was estimated with Cliff's d.

Results

Strength asymmetry displayed significant difference (p=0.007), mobility, proprioception and mFMS did not (p=0.263, p=0.792 and p=0.181, respectively). Mean scores for mobility, proprioception, strength asymmetry and mFMS for injured versus non-injured players (effect size) were: 40.00 vs 38.00 (0.37), 10.33 vs 10.20 (0.10), 61.13 vs 30.40 (0.80) and 7.33 vs 8.90 (−0.4), respectively.

Conclusions

This study found no relationship between mobility/proprioception and injury risk; however, strength asymmetry was statistically significant in predicting injury and mFMS exhibited enough positive difference for recommendation of further investigation.

W5″ Test: A simple method for measuring mean power output in the bench press exercise

The aims of the present study were to assess the validity and reliability of a novel simple test [Five Seconds Power Test (W5″ Test)] for estimating the mean power output during the bench press exercise at different loads, and its sensitivity to detect training-induced changes. Thirty trained young men completed as many repetitions as possible in a time of ≈5 s at 25%, 45%, 65% and 85% of one-repetition maximum (1RM) in two test sessions separated by four days. The number of repetitions, linear displacement of the bar and time needed to complete the test were recorded by two independent testers, and a linear encoder was used as the criterion measure. For each load, the mean power output was calculated in the W5″ Test as mechanical work per time unit and compared with that obtained from the linear encoder. Subsequently, 20 additional subjects (10 training group vs. 10 control group) were assessed before and after completing a seven-week training programme designed to improve maximal power. Results showed that both assessment methods correlated highly in estimating mean power output at different loads (r range: 0.86-0.94; p < .01) and detecting training-induced changes (R(2): 0.78). Good to excellent intra-tester (intraclass correlation coefficient (ICC) range: 0.81-0.97) and excellent inter-tester (ICC range: 0.96-0.99; coefficient of variation range: 2.4-4.1%) reliability was found for all loads. The W5″ Test was shown to be a valid, reliable and sensitive method for measuring mean power output during the bench press exercise in subjects who have previous resistance training experience.

Strength training in soccer with a specific focus on highly trained players

Background

Data concerning the physical demands of soccer (e.g., activity pattern) suggest that a high level of performance requires well-developed neuromuscular function (NF). Proficient NF may be relevant to maintain and/or increase players’ short- (intense periods of soccer-specific activity; accelerations, decelerations, and sprinting) and long-term performance during a match and throughout the season.

Objective

This review examines the extent to which distinct modes of strength training improve soccer players’ performance, as well as the effects of concurrent strength and endurance training on the physical capacity of players.

Data sources

A selection of studies was performed in two screening phases. The first phase consisted of identifying articles through a systematic search using relevant databases, including the US National Library of Medicine (PubMed), MEDLINE, and SportDiscus. Several permutations of keywords were utilized (e.g., soccer; strength; power; muscle function), along with the additional scanning of the reference lists of relevant manuscripts. Given the wide range of this review, additional researchers were included. The second phase involved applying six selection criteria to the articles.

Results and conclusions

After the two selection phases, 24 manuscripts involving a total sample of 523 soccer players were considered. Our analysis suggests that professional players need to significantly increase their strength to obtain slight improvements in certain running-based actions (sprint and change of direction speed). Strength training induces greater performance improvements in jump actions than in running-based activities, and these achievements varied according to the motor task [e.g., greater improvements in acceleration (10 m) than in maximal speed (40 m) running movements and in non-squat jump (SJ) than in SSC-based actions (countermovement jump)]. With regard to the strength/power training methods used by soccer players, high-intensity resistance training seems to be more efficient than moderate-intensity resistance training (hypertrophic). From a training frequency perspective, two weekly sessions of strength training are sufficient to increase a player’s force production and muscle power-based actions during pre-season, with one weekly session being adequate to avoid in-season detraining. Nevertheless, to further improve performance during the competitive period, training should incorporate a higher volume of soccer-specific power-based actions that target the neuromuscular system. Combined strength/power training programs involving different movement patterns and an increased focus on soccer-specific power-based actions are preferred over traditional resistance exercises, not only due to their superior efficiency but also due to their ecological value. Strength/power training programs should incorporate a significant number of exercises targeting the efficiency of stretch-shortening-cycle activities and soccer-specific strength-based actions. Manipulation of training surfaces could constitute an important training strategy (e.g., when players are returning from an injury). In addition, given the conditional concurrent nature of the sport, concurrent high-intensity strength and high-intensity endurance training modes (HIT) may enhance a player’s overall performance capacity.

Our analysis suggests that neuromuscular training improves both physiological and physical measures associated with the high-level performance of soccer players.

Electronic supplementary material

The online version of this article (doi:10.1186/s40798-015-0006-z) contains supplementary material, which is available to authorized users.