Hydrolyzed Collagen-Sources and Applications

Tissue-specific gelatin bioink as a rheology modifier for high printability and adjustable tissue properties

Decellularized extracellular matrix (dECM) has emerged as an exceptional biomaterial that effectively recapitulates the native tissue microenvironment for enhanced regenerative potential. Although various dECM bioinks derived from different tissues have shown promising results, challenges persist in achieving high-resolution printing of flexible tissue constructs because of the inherent limitations of dECM's weak mechanical properties and poor printability. Attempts to enhance mechanical rigidity through chemical modifications, photoinitiators, and nanomaterial reinforcement have often compromised the bioactivity of dECM and mismatched the desired mechanical properties of target tissues. In response, this study proposes a novel method involving a tissue-specific rheological modifier, gelatinized dECM. This modifier autonomously enhances bioink modulus pre-printing, ensuring immediate and precise shape formation upon extrusion. The hybrid bioink with GeldECM undergoes a triple crosslinking system-physical entanglement for pre-printing, visible light photocrosslinking during printing for increased efficiency, and thermal crosslinking post-printing during tissue culture. A meticulous gelatinization process preserves the dECM protein components, and optimal hybrid ratios modify the mechanical properties, tailoring them to specific tissues. The application of this sequential multiple crosslinking designs successfully yielded soft yet resilient tissue constructs capable of withstanding vigorous agitation with high shape fidelity. This innovative method, founded on mechanical modulation by GeldECM, holds promise for the fabrication of flexible tissues with high resilience.

Extraction of collagenolytic proteases from Aspergillus heteromorphus URM 0269 in an aqueous two-phase system for application in collagen hydrolysis

Collagenolytic proteases produced by Aspergillus heteromorphus URM0269 were extracted using a PEG/sulfate aqueous two-phase system (ATPS). A 23 factorial design was performed to analyze the independent variables: PEG molar mass (MPEG), PEG concentration (CPEG), and sulfate concentration (Csulf). The extracted proteases were also evaluated for their optimum pH and stability at different pH levels (4.0 - 11.0) after 20 h of incubation. Collagen was extracted from mutton snapper (Lutjanus analis) skin using acetic acid (0.5 mol L-1). The enzyme was preferentially partitioned to the PEG-rich phase (K > 1), whose highest purification factor and recovery (PF = 6.256 and Y = 404.432%) were obtained under specific conditions: MPEG 8000 g.mol-1, CPEG 30%, Csulf 10%. The ATPS extraction provided an enzymatic activity range of pH 7.0 - 11.0, exhibiting greater stability compared to the crude extract. Approximately 80% of protease activity was maintained after 20 hours of incubation at all analyzed pH levels, except pH 11.0. Collagen extraction from L. analis skin yielded 8.056%, and both crude extract samples and ATPS-derived samples successfully hydrolyzed the extracted collagen, reaching peak hydrolysis after 36 hours of treatment. These findings demonstrate the feasibility of extracting highly purified and active proteases capable of hydrolyzing L. analis collagen.

Native collagen sheet mask improves skin health and appearance: A comprehensive clinical evaluation

BACKGROUND

Collagen, a critical structural protein found abundantly in animal skin and bones, has become increasingly recognized for its potential therapeutic role in skincare. Despite growing interest, the scientific evidence for the efficacy of collagen sheet masks remains limited. The principal objective of our study was to provide insights into the multifaceted role of collagen in skin health, with a specific focus on its application in collagen sheet masks.

METHODS

The effects of a collagen sheet mask consisting of >92% native bovine collagen were investigated. The soluble protein components of the collagen matrix were analyzed and the influence of soluble collagen components on fibroblast regulation was examined. Scanning Electron Microscope (SEM) analysis was performed for structural analysis and effect on irritated skin. Five different clinical studies were conducted, including a comparison of the diversity of the skin microbiome, the tolerance and local irritating reactions in atopic dermatitis, an evaluation of skin redness after UV radiation, wrinkle reduction, and hydration and skin roughness of the collagen mask in comparison to a pre-soaked cellulose sheet mask.

RESULTS

The collagen mask contains soluble protein components, including small collagen peptides. The mask showed potential for promoting fibroblast activity. SEM analysis showed a native collagen structure similar to human dermis. The mask maintained the skin microbiome diversity and decreased skin pH levels. It demonstrated good tolerability on both intact and lesional skin and had a significant effect in reducing erythema caused by UV radiation compared to other skincare products. It showed significant improvements in skin hydration and the volume of eye wrinkles and was more effective than pre-soaked cellulose sheet masks.

CONCLUSION

Collagen sheet masks have the potential to positively impact skin health and appearance by increasing hydration, reducing erythema, minimizing wrinkles, and maintaining a healthy skin microbiome and skin barrier.

Methods for detection and quantification of gelatin from different sources

Gelatin is a water-soluble protein obtained from the collagen of various animal origins (porcine, bovine, fish, donkey, horse, and deer hide) and has diverse applications in the food, pharmaceutical, and cosmetics industries. Porcine and bovine gelatins are extensively used in food and non-food products; however, their acceptance is limited due to religious prohibitions, whereas fish gelatin is accepted in all religions. In Southeast Asia, especially in China, gelatin obtained from donkey and deer skins is used in medicines. However, both sources suffer from adulteration (mixing different sources of gelatin) due to their limited availability and high cost. Unclear labeling and limited information about actual gelatin sources in gelatin-containing products cause serious concern among societies for halal and fraud authentication of gelatin sources. Therefore, authenticating gelatin sources in gelatin-based products is challenging due to close similarities between the composition differences and degradation of DNA and protein biomarkers in processed gelatin. Thus, different methods have been proposed to identify and quantify different gelatin sources in pharmaceutical and food products. To the best of our knowledge, this systematic and comprehensive review highlights different authentication techniques and their limitations in gelatin detection and quantification in various commercial products. This review also describes halal authentication and adulteration prevention strategies of various gelatin sources, mainly focussing on research gaps, challenges, and future directions in this research area.

Investigation of the cellular and molecular effects of dehydrozingerone formulation on various days of diabetic wound repair

Cases of diabetes are significantly increasing year by year, attracting the attention of medical professionals and researchers to focus on diabetes and its underlying complications. One among such are diabetic wounds which are difficult to heal, creating severe implications in the day-to-day chores of not only patients, but also family members. Dehydrozingerone (DHZ) is known to possess various effects like anti-inflammatory, anti-microbial, antioxidant, and wound-healing properties. The effect of DHZ on different phases of diabetic wound healing remains untested. Hence, this study was proposed to find out the effect of oral and topical formulation of DHZ on day 5, 10 and 15 of diabetic wound healing. Excisional wounds were created on the dorsal side of animals using punch biopsy to mimic human diabetic wounds. Topical DHZ gel (100 mg in 1 gm of gel) was prepared using 1% Carbopol 934 and was applied twice a day. The treated groups had increased percentage of wound closure; western blotting suggested that DHZ significantly increased ERK and JNK levels and decreased TNF and MMP 2 and 9 levels. From histopathological studies, it was observed that angiogenesis, collagen formation, granulation tissue formation, and fibroblast proliferation were improved on days 5, 10, and 15 of diabetic wound healing. These findings indicate that DHZ (both systemic and topical) are effective during the early phases of wound healing which gets impaired in diabetic wounds. Dehydrozingerone accelerated diabetic wound healing by regulating the various hallmarks of wound healing process.

Unlocking the Therapeutic Potential of Marine Collagen: A Scientific Exploration for Delaying Skin Aging

Aging is closely associated with collagen degradation, impacting the structure and strength of the muscles, joints, bones, and skin. The continuous aging of the skin is a natural process that is influenced by extrinsic factors such as UV exposure, dietary patterns, smoking habits, and cosmetic supplements. Supplements that contain collagen can act as remedies that help restore vitality and youth to the skin, helping combat aging. Notably, collagen supplements enriched with essential amino acids such as proline and glycine, along with marine fish collagen, have become popular for their safety and effectiveness in mitigating the aging process. To compile the relevant literature on the anti-aging applications of marine collagen, a search and analysis of peer-reviewed papers was conducted using PubMed, Cochrane Library, Web of Science, and Embase, covering publications from 1991 to 2024. From in vitro to in vivo experiments, the reviewed studies elucidate the anti-aging benefits of marine collagen, emphasizing its role in combating skin aging by minimizing oxidative stress, photodamage, and the appearance of wrinkles. Various bioactive marine peptides exhibit diverse anti-aging properties, including free radical scavenging, apoptosis inhibition, lifespan extension in various organisms, and protective effects in aging humans. Furthermore, the topical application of hyaluronic acid is discussed as a mechanism to increase collagen production and skin moisture, contributing to the anti-aging effects of collagen supplementation. The integration of bio-tissue engineering in marine collagen applications is also explored, highlighting its proven utility in skin healing and bone regeneration applications. However, limitations to the scope of its application exist. Thus, by delving into these nuanced considerations, this review contributes to a comprehensive understanding of the potential and challenges associated with marine collagen in the realm of anti-aging applications.

Use of Collagen in Cosmetic Products

Collagen (CLG) belongs to the family of fibrillar proteins and is composed of left-handed α polypeptide chains, which, twisting around themselves and their axis, form a right-handed superhelix. In the chemical structure, it contains mainly proline, hydroxyproline, glycine, and hydroxylysine. It occurs naturally in the dermis in the form of fibers that provide the skin with proper density and elasticity. The review aimed to present the types of collagen protein, factors affecting its structure and its unusual role in the functioning of the human body. Also, an overview of cosmetic products containing collagen or its derivatives, the characteristics of the formulas of these products, and the effects of their use were presented. Throughout the market, there are many cosmetic and cosmeceutical products containing CLG. They are in the form of fillers administered as injections, belonging to the group of the oldest tissue fillers; products administered orally and for topical use, such as creams, gels, serums, or cosmetic masks. Analyzed studies have shown that the use of products with collagen or its peptides improves the general condition of the skin and delays the aging process by reducing the depth of wrinkles, improving hydration (in the case of oral preparations), reducing transepithelial water loss (TEWL), as well as improving skin density and elasticity. In addition, oral application of bioactive CLG peptides has shown a positive effect on the nails, reducing the frequency of their breakage.

Current situation, trend, and prospects of research on functional components from by-products of baijiu production: A review

In the present scenario marked by energy source shortages and escalating concerns regarding carbon dioxide emissions, there is a growing emphasis on the optimal utilization of biomass resources. Baijiu, as the Chinese national spirit, boasts remarkably high sales volumes annually. However, the production of baijiu yields various by-products, including solid residues (Jiuzao), liquid wastewater (Huangshui and waste alcohol), and gaseous waste. Recent years have witnessed dedicated research aimed at exploring the composition and potential applications of these by-products, seeking sustainable development and comprehensive resource utilization. This review systematically summarizes recent research, shedding light on both the baijiu brewing process and the bioactive compounds present baijiu production by-products (BPBPs). The primary focus lies in elucidating the potential extraction methods and applications of BPBPs, offering a practical approach to comprehensive utilization of by-products in functional food, medicine, cosmetic, and packaging fields. These applications not only contribute to enhancing production efficiency and mitigating environmental pollution, but also introduce innovative concepts for the sustainable advancement of associated industries. Future research avenues may include more in-depth compositional analysis, the development of utilization technologies, and the promotion of potential industrialization.

Spray dried acerola (Malpighia emarginata DC) juice particles to produce phytochemical-rich starch-based edible films

This study aimed to produce spray dried acerola juice microparticles with different protein carriers to be incorporated into edible starch films. The microparticles were evaluated for solids recovery, polyphenol retention, solubility, hygroscopicity, particle size distribution, X-ray diffraction, phytochemical compounds and antioxidant activity. Acerola microparticles produced with WPI/hydrolysed collagen carriers (AWC) with higher solids recovery (53.5 ± 0.34% w/w), polyphenol retention (74.4 ± 0.44% w/w), high solubility in water (85.2 ± 0.4% w/w), total polyphenol content (128.45 ± 2.44 mg GAE/g) and good storage stability were selected to produce starch-based films by casting. As a result, cassava films with water vapour permeability of 0.29 ± 0.07 g mm/m2 h KPa, polyphenol content of 10.15 ± 0.22 mg GAE/g film and DPPH radical scavenging activity of 6.57 ± 0.13 μM TE/g film, with greater migration of polyphenol to water (6.30 ± 0.52 mg GAE/g film) were obtained. Our results show that the incorporation of phytochemical-rich fruit microparticles is a promising strategy to create biodegradable edible films.

In Vitro and In Vivo Bone-Forming Effect of a Low-Molecular-Weight Collagen Peptide

This study reveals that low-molecular-weight collagen peptide (LMWCP) can stimulate the differentiation and the mineralization of MC3T3-E1 cells in vitro and attenuate the bone remodeling process in ovariectomized (OVX) Sprague-Dawley rats in vivo. Moreover, the assessed LMWCP increased the activity of alkaline phosphatase (ALP), synthesis of collagen, and mineralization in MC3T3-E1 cells. Additionally, mRNA levels of bone metabolism-related factors such as the collagen type I alpha 1 chain, osteocalcin (OCN), osterix, bone sialoprotein, and the Runt family-associated transcription factor 2 were increased in cells treated with 1,000 μg/ml of LMWCP. Furthermore, we demonstrated that critical bone morphometric parameters exhibited significant differences between the LMWCP (400 mg/kg)-receiving and vehicle-treated rat groups. Moreover, the expression of type I collagen and the activity of ALP were found to be higher in both the femur and lumbar vertebrae of OVX rats treated with LMWCP. Finally, the administration of LMWCP managed to alleviate osteogenic parameters such as the ALP activity and the levels of the bone alkaline phosphatase, the OCN, and the procollagen type 1 N-terminal propeptide in OVX rats. Thus, our findings suggest that LMWCP is a promising candidate for the development of food-based prevention strategies against osteoporosis.

Collagen-Based Scaffolds for Chronic Skin Wound Treatment

Chronic wounds, commonly known as ulcers, represent a significant challenge to public health, impacting millions of individuals every year and imposing a significant financial burden on the global health system. Chronic wounds result from the interruption of the natural wound-healing process due to internal and/or external factors, resulting in slow or nonexistent recovery. Conventional medical approaches are often inadequate to deal with chronic wounds, necessitating the exploration of new methods to facilitate rapid and effective healing. In recent years, regenerative medicine and tissue engineering have emerged as promising avenues to encourage tissue regeneration. These approaches aim to achieve anatomical and functional restoration of the affected area through polymeric components, such as scaffolds or hydrogels. This review explores collagen-based biomaterials as potential therapeutic interventions for skin chronic wounds, specifically focusing on infective and diabetic ulcers. Hence, the different approaches described are classified on an action-mechanism basis. Understanding the issues preventing chronic wound healing and identifying effective therapeutic alternatives could indicate the best way to optimize therapeutic units and to promote more direct and efficient healing.

Development of nanocomposites based on chitosan/reduced graphene oxide for wound healing application

Nanocomposites containing different effective materials have various effects, such as antioxidant, and anti-inflammatory activity, which are desirable for wound dressing. Herein, nanocomposites based on chitosan/reduced graphene oxide (CS/rGO) containing curcumin (CS/rGO/Cur), curcumin and papain (CS/rGO/Cur/Pa), curcumin, papain, and collagen peptide (CS/rGO/CP/Cur/Pa), prepared using ionic gelation method and characterized by Fourier Transform Infrared (FTIR), Differential Light Scattering (DLS), X-ray diffraction (XRD), and Scanning Electron Microscope (SEM). Subsequently, the nanocomposite's potential for wound healing was studied through parameters such as porosity, swelling, degradability, anti-inflammatory, antioxidant, antibacterial, cell viability, and in-vivo. The results of FTIR, XRD, SEM, and DLS showed that the nanocomposites synthesized properly with an almost spherical morphology, an average diameter of below 100 nm (mostly 40-85 nm), and a hydrodynamic diameter of 455-616 nm. The various tests demonstrated the nanocomposite's effectiveness in wound healing. The results showed that CS/rGO/CP/Cur/Pa increased the anti-inflammatory and cell viability up to 99.7 % and 395 %, respectively, which is higher than others. Animal tests on rats showed that CS/rGO/CP/Cur/Pa accelerated the wound healing rate up to 70 %. In conclusion, the results showed that the nanocomposites based on CS/rGO significantly improve wound healing, and the presence of collagen peptides boost their wound healing potency.

Collagen peptide supplementation before bedtime reduces sleep fragmentation and improves cognitive function in physically active males with sleep complaints

PURPOSE

The primary aim of this study was to examine whether a glycine-rich collagen peptides (CP) supplement could enhance sleep quality in physically active men with self-reported sleep complaints.

METHODS

In a randomized, crossover design, 13 athletic males (age: 24 ± 4 years; training volume; 7 ± 3 h·wk1) with sleep complaints (Athens Insomnia Scale, 9 ± 2) consumed CP (15 g·day1) or a placebo control (CON) 1 h before bedtime for 7 nights. Sleep quality was measured with subjective sleep diaries and actigraphy for 7 nights; polysomnographic sleep and core temperature were recorded on night 7. Cognition, inflammation, and endocrine function were measured on night 7 and the following morning. Subjective sleepiness and fatigue were measured on all 7 nights. The intervention trials were separated by ≥ 7 days and preceded by a 7-night familiarisation trial.

RESULTS

Polysomnography showed less awakenings with CP than CON (21.3 ± 9.7 vs. 29.3 ± 13.8 counts, respectively; P = 0.028). The 7-day average for subjective awakenings were less with CP vs. CON (1.3 ± 1.5 vs. 1.9 ± 0.6 counts, respectively; P = 0.023). The proportion of correct responses on the baseline Stroop cognitive test were higher with CP than CON (1.00 ± 0.00 vs. 0.97 ± 0.05 AU, respectively; P = 0.009) the morning after night 7. There were no trial differences in core temperature, endocrine function, inflammation, subjective sleepiness, fatigue and sleep quality, or other measures of cognitive function or sleep (P > 0.05).

CONCLUSION

CP supplementation did not influence sleep quantity, latency, or efficiency, but reduced awakenings and improved cognitive function in physically active males with sleep complaints.

A Novel Comprehensive Therapeutic Approach to the Challenges of Chronic Wounds: A Brief Review and Clinical Experience Report

Following the clinical perspective and concept that a healthy body will not develop chronic wounds, the central approach for the treatment described here is based on an understanding of how the body transforms the wound microenvironment from a non-healing to a healing state. As part of a comprehensive treatment regimen that includes OCM™ (complete matrix), wound preparation, and skin protectant formulations, the OCM contains components for complete wound healing by attending to the individual needs required to promote the closure of each unique chronic wound. During application of the comprehensive treatment regimen in independent investigator-led trials, the total wound percentage average reduction over the first 4 weeks of treatment was 60% across multiple wound types; median time to total wound closure was 6.9 weeks. Safety testing of the OCM formulation shows no potential allergenicity, no potential sensitization, and no known product-related adverse events. Clinical trials evaluating the OCM formulation as part of the comprehensive treatment regimen of multiple wound types are underway. Results of clinical trials and real-world experiences will expand current knowledge of the wound-healing potential of this novel product.

Marine Bioactive Peptides: Anti-Photoaging Mechanisms and Potential Skin Protective Effects

Skin photoaging, resulting from prolonged exposure to ultraviolet radiation, is a form of exogenous aging that not only impacts the aesthetic aspect of the skin but also exhibits a strong correlation with the onset of skin cancer. Nonetheless, the safety profile of non-natural anti-photoaging medications and the underlying physiological alterations during the process of photoaging remain inadequately elucidated. Consequently, there exists a pressing necessity to devise more secure interventions involving anti-photoaging drugs. Multiple studies have demonstrated the noteworthy significance of marine biomolecules in addressing safety concerns related to anti-photoaging and safeguarding the skin. Notably, bioactive peptides have gained considerable attention in anti-photoaging research due to their capacity to mitigate the physiological alterations associated with photoaging, including oxidative stress; inflammatory response; the abnormal expression of matrix metalloproteinase, hyaluronidase, and elastase; and excessive melanin synthesis. This review provides a systematic description of the research progress on the anti-photoaging and skin protection mechanism of marine bioactive peptides. The focus is on the utilization of marine bioactive peptides as anti-photoaging agents, aiming to offer theoretical references for the development of novel anti-photoaging drugs and methodologies. Additionally, the future prospects of anti-aging drugs are discussed, providing an initial reference for further research in this field.

Management and Amelioration of Knee Joint Osteoarthritis in Adults Using a Novel High-Functional Bovine Collagen Peptide as a Nutritional Therapy: A Double-Blind, Prospective, Multicentric, Randomized, Active and Placebo Controlled, Five-Arm, Clinical Study to Evaluate the Efficacy, Safety, and Tolerability

OBJECTIVE

The various functionalities of collagen peptides have generated a large interest in utilizing the bioactive peptides as a nutritional therapy to ameliorate various physiological degenerative conditions. Collagen peptides are observed to reduce the pain and aligned difficulties with respect to osteoarthritis. Here we report the enhanced ameliorating property of novel high-functional "Wellnex" Type J collagen peptides following a double-blind randomized active and placebo-controlled 5-arm clinical trial (n = 100) by using it as a nutritional supplement in subjects with knee joint osteoarthritis in comparison with conventional bovine collagen peptides. The efficacy, safety, and tolerability were also studied.

DESIGN

Dosages of 2.5, 5.0, and 10.0 g of high-functional Type J bovine collagen peptides, 10.0 g of conventional collagen peptides, and 10.0 g of placebo were given to the 5 groups for a period of 90 days. The Western Ontario McMaster Universities Arthritis Index (WOMAC) score, Pain Scale, Quality of Life (QoL), Physician's Impression of change Score (PICS), serum C-terminal cross-linked telopeptide of type II collagen (CTX-II) levels and Magnetic Resonance Imaging Osteoarthritis Knee Score (MOAKS) parameters were monitored.

RESULTS

Type J 2.5 g showed significant improvement in WOMAC, QoL, CTX, and MOAKS and observed to be equivalent to conventional collagen peptide 10-g supplementation in terms of efficacy.

CONCLUSION

The two significant outcomes of the study were that Type J 10.0 g, Type J 5.0 g, Type J 2.5 g and conventional collagen peptides 10.0 g supplementation were observed to be beneficial nutraceutical therapies for knee joint osteoarthritis, and Type J 2.5 g supplementation was equivalent to conventional collagen peptides 10.0-g supplementation in terms of efficacy.

Psidium guajava L. phenolic compound-reinforced lamellar scaffold for tracheal tissue engineering

The aim of this work was to develop a dense lamellar scaffold, as a biomimetic material with potential applications in the regeneration of tracheal tissue after surgical tumor resection. The scaffolds were produced by plastic compression technique, exploiting the use of total phenolic compounds (TPC) from Psidium guajava Linn as a potential cross-linking agent in a polymeric mixture based on collagen (COL), silk fibroin (SF), and polyethylene glycol 400 (PEG 400). Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) confirmed the chemical interactions between the polymers and the cross-linking of TPC between COL and SF. Morphological analyses showed scaffolds with porosity, interconnectivity, and a porous surface structure with a gyroid-like geometry. The analysis of the anisotropic degree resulted in anisotropic structures (0.1% TFC and 0.3% TFC) and an isotropic structure (0.5% TFC). In the mechanical properties, it was evidenced greater resistance for the 0.3% TFC formulation. The addition of TPC percentages did not result in a significant difference (p > 0.05) in swelling capacity and disintegration rate. The results confirmed that TPC were able to modulate the morphological, morphometric, and mechanical properties of scaffolds. Thus, this study describes a potential new material to improve the regeneration of major tracheal structures after surgical tumor removal.

Production of dehairing protease by Bacillus cereus VITSN04: a model cradle-to-cradle approach for sustainable greener production of leathers

Despite several attempts over decades, process scalability and sustainability remain a challenge to produce an environmental-friendly enzyme to gain industrial attention. In the present study, microbial degradation of chrome shavings (chromium-collagen leather waste) and the resulting collagen hydrolysate for producing the dehairing protease by Bacillus cereus VITSN04 were investigated in a lab-scale fermentor. Scale-up degradation of shavings resulted in higher recovery of collagen hydrolysate (76%) within 72 h compared to shake flasks (68% in 120 h). Earlier achieved medium composition of collagen hydrolysate (12 g L-1) and molasses (15 g L-1) appeared to induce amylase at the high rate, despite the maximal production of protease (203.8 ± 0.18 U mL-1), which was analysed by ANS fluorescence spectroscopy. Optimization of the media containing collagen hydrolysate (12 g L-1) and molasses (5 g L-1) was effective in producing protease (170.6 ± 0.1 U mL-1) and reduced the co-synthesis of amylase (48.2 ± 0.09 U mL-1). The controlled fermentation process by feeding molasses during the exponential growth phase had enhanced the dehairing protease production (∼2.96 fold). The produced protease then partitioned through the biphasic system and showed significant dehairing of goat skins on the pilot scale. Thus, the scalability of the process to produce dehairing enzymes using waste, generated at the site of its use, offers hope for sustainable greener production of leathers.

Biodegradable and biocompatible collagen-based hybrid materials for force sensing applications

With the aim of replacing synthetic macromolecules by biological macromolecules for advanced applications, collagen films were produced with two different ionic liquids (ILs), choline dihydrogen phosphate ([Ch][DHP]) and choline serinate ([Ch][Seri]), added in order to modulate the electrical responses. The films were prepared by casting, varying IL content between 0 and 6 wt%. The morphology and thermal properties of the resulting films were found to be independent of both IL type and content. However, the highest direct curret (d.c.) electrical conductivity (1.4 × 10-8 S·cm-1) was achieved for collagen films containing 3 wt% [Ch][DHP]. Furthermore, it was demonstrated that IL/collagen films were non-cytotoxic, with cell activity values exceeding 70 %. These collagen films were proven to be suitable for force sensing applications, displaying excellent sensitivity and stability upon repeated testing.

Collagen-Based Medical Devices for Regenerative Medicine and Tissue Engineering

Assisted reproductive technologies are key to solving the problems of aging and organ defects. Collagen is compatible with living tissues and has many different chemical properties; it has great potential for use in reproductive medicine and the engineering of reproductive tissues. It is a natural substance that has been used a lot in science and medicine. Collagen is a substance that can be obtained from many different animals. It can be made naturally or created using scientific methods. Using pure collagen has some drawbacks regarding its physical and chemical characteristics. Because of this, when collagen is processed in various ways, it can better meet the specific needs as a material for repairing tissues. In simpler terms, collagen can be used to help regenerate bones, cartilage, and skin. It can also be used in cardiovascular repair and other areas. There are different ways to process collagen, such as cross-linking it, making it more structured, adding minerals to it, or using it as a carrier for other substances. All of these methods help advance the field of tissue engineering. This review summarizes and discusses the current progress of collagen-based materials for reproductive medicine.

Collagen-EGCG Combination Synergistically Prevents UVB-Induced Skin Photoaging in Nude Mice

Ultraviolet (UV) radiation is a major cause of skin photoaging through generating excessive oxidative stress and inflammation. One of the strategies is to use photo-chemoprotectors, such as natural products with antioxidant and anti-inflammatory properties, to protect the skin from photo damage. The present study investigates the photoprotective potentials of topical administration of unhydrolyzed collagen, epigallocatechin gallate (EGCG), and their combination against ultraviolet B (UVB)-induced photoaging in nude mice. It is found that both the solo and combined pretreatments could recover UVB-induced depletion of antioxidative enzymes, including superoxide dismutase and glutathione peroxidase (GSH-Px), as well as an increase of lipid peroxide malondialdehyde and inflammatory tumor necrosis factor-α. Meanwhile, the UVB-stimulated skin collagen degradation is attenuated significantly with drug treatments, which is evidenced by expression analysis of matrix metalloproteinase-1 and hydroxyproline. Additionally, the mouse skin histology shows that the drug-pretreated groups possess decreased epidermis thickness and normal collagen fiber structure of the dermis layer. These results demonstrate that both EGCG and collagen can protect the skin against UVB-induced skin photoaging. Synergistically, the combination of them shows the maximum prevention to skin damage, showing its potential in the application of anti-photoaging formulation products.

Trends in biopolymer science applied to cosmetics

The term biopolymer refers to materials obtained by chemically modifying natural biological substances or producing them through biotechnological processes. They are biodegradable, biocompatible and non-toxic. Due to these advantages, biopolymers have wide applications in conventional cosmetics and new trends and have emerged as essential ingredients that function as rheological modifiers, emulsifiers, film-formers, moisturizers, hydrators, antimicrobials and, more recently, materials with metabolic activity on skin. Developing approaches that exploit these features is a challenge for formulating skin, hair and oral care products and dermatological formulations. This article presents an overview of the use of the principal biopolymers used in cosmetic formulations and describes their sources, recently derived structures, novel applications and safety aspects of the use of these molecules.

Applications of Bacterial Cellulose-Based Composite Materials in Hard Tissue Regenerative Medicine

BACKGROUND

Cartilage, bone, and teeth, as the three primary hard tissues in the human body, have a significant application value in maintaining physical and mental health. Since the development of bacterial cellulose-based composite materials with excellent biomechanical strength and good biocompatibility, bacterial cellulose-based composites have been widely studied in hard tissue regenerative medicine. This paper provides an overview of the advantages of bacterial cellulose-based for hard tissue regeneration and reviews the recent progress in the preparation and research of bacterial cellulose-based composites in maxillofacial cartilage, dentistry, and bone.

METHOD

A systematic review was performed by searching the PubMed and Web of Science databases using selected keywords and Medical Subject Headings search terms.

RESULTS

Ideal hard tissue regenerative medicine materials should be biocompatible, biodegradable, non-toxic, easy to use, and not burdensome to the human body; In addition, they should have good plasticity and processability and can be prepared into materials of different shapes; In addition, it should have good biological activity, promoting cell proliferation and regeneration. Bacterial cellulose materials have corresponding advantages and disadvantages due to their inherent properties. However, after being combined with other materials (natural/ synthetic materials) to form composite materials, they basically meet the requirements of hard tissue regenerative medicine materials. We believe that it is worth being widely promoted in clinical applications in the future.

CONCLUSION

Bacterial cellulose-based composites hold great promise for clinical applications in hard tissue engineering. However, there are still several challenges that need to be addressed. Further research is needed to incorporate multiple disciplines and advance biological tissue engineering techniques. By enhancing the adhesion of materials to osteoblasts, providing cell stress stimulation through materials, and introducing controlled release systems into matrix materials, the practical application of bacterial cellulose-based composites in clinical settings will become more feasible in the near future.

Advances in the authentication of collagen products based on DNA technology

Collagenous products are making their way into consumer markets such as foods, nutraceuticals, cosmetics and pharmaceuticals increasingly. Collagen in a large family of proteins is ubiquitous in metazoan. The most effective way to identify biological samples including collagen is DNA technology indisputably. However, the DNA content of collagen mostly derived from connective tissue is relatively less, and commercial collagen products are usually subjected to some harsh treatments in the production process, which makes DNA damage more serious, thus tracing their origin becomes a huge challenge. At present, DNA enrichment mainly relies on silica based centrifugal columns after extraction by classical phenol chloroform method. For improving the amplification of DNA fragments, small amplicons are designed based on more stable mitochondrial genes, such as cytochrome b gene (cytb). In addition to conventional PCR for DNA amplification, some new PCR techniques have also been developed, such as DNA barcoding techniques, PCR-Southern hybridization and fluorescent PCR. These PCR techniques have their pros and cons, and are mainly used in the identification of gelatin at present. The development of a complete set of DNA authentication is of great significance for the control of collagen products quality and will contribute to sustainable development of collagen industry.

Green Extraction and Preliminary Biological Activity of Hydrolyzed Collagen Peptides (HCPs) Obtained from Whole Undersized Unwanted Catches (Mugil cephalus L.)

Considering the global increase in fish consumption, the growing side-streams coming from the fish supply chain (e.g., skin, fins, tail, heads…), also including undersized or "unwanted catches", have been recently proposed as source of high-value bioactive compounds (e.g., peptides and fatty acids). In this case study, hydrolyzed collagen peptides (HCPs) were extracted from different parts of Mugil cephalus L. using environmentally friendly techniques such as ultrasounds and enzymatic treatments. Both a mixed biomass derived from the skin, fins, and tail, and a whole fish, were considered as starting biomass, simulating the unsorted processing side-streams and an undersized/unwanted catch, respectively. The extracted HCPs were purified in fractions (<3 KDa and >3 KDa) whose yields (about 5% and 0.04-0.3%, respectively) demonstrated the efficiency of the hydrolysis process. The extraction protocol proposed allowed us to also isolate the intermediate products, namely the lipids (about 8-10%) and the non-collagenous proteins (NCs, 16-23%), whose exploitation could be considered. Each sample was characterized using Sircol, UltraViolet-Spectra, and hydroxyproline assay, and the viability of their collagen fractions was tested on human endothelial cells. Significant effects were obtained at a fraction of <3 KDa, in particular at a concentration of 0.13 µg/mL. The T-scratch test was also performed, with positive results in all fractions tested.

Polyherbal formulation PL02 alleviates pain, inflammation, and subchondral bone deterioration in an osteoarthritis rodent model

Introduction

Osteoarthritis (OA) is a debilitating disease with significant personal and socioeconomic burdens worldwide.

Methods

To address this, we developed a multitargeted formulation called PL02, which includes standardized extracts of Rosa canina L, Hippophae rhamnoides, and collagen peptide. We tested the pharmacological efficacy of PL02 in a rodent model of OA induced by Monosodium iodoacetate (MIA).

Results

Our results demonstrate that oral administration of PL02 has antioxidant effects by down-regulating NOS, reduces pain-related behavior, and mitigates inflammation by inhibiting IL-1b and TNF-α production, as well as downregulating CGRP1 and COX-II. PL02 also exhibits anti-catabolic and chondroprotective activity by significantly downregulating MMP13 and upregulating BCL2. Additionally, PL02 demonstrates chondrogenic activity by significantly upregulating SOX-9 (a master regulator of chondrogenesis), Coll-I, and aggrecan, which are major components of articular cartilage. Furthermore, PL02 prevents microarchitectural deterioration of subchondral bone.

Conclusion

Overall, PL02 is an orally active, multi-targeted therapy that not only alleviates pain and inflammation but also effectively halts cartilage and subchondral bone deterioration. It represents a safe and promising candidate for the treatment and management of OA.

Optimizing PCL/PLGA Scaffold Biocompatibility Using Gelatin from Bovine, Porcine, and Fish Origin

This research introduces a novel approach by incorporating various types of gelatins, including bovine, porcine, and fish skin, into polycaprolactone and poly (lactic-co-glycolic acid) using a solvent casting method. The films are evaluated for morphology, mechanical properties, thermal stability, biodegradability, hemocompatibility, cell adhesion, proliferation, and cytotoxicity. The results show that the incorporation of gelatins into the films alters their mechanical properties, with a decrease in tensile strength but an increase in elongation at break. This indicates that the films become more flexible with the addition of gelatin. Gelatin incorporation has a limited effect on the thermal stability of the films. The composites with the gelatin show higher biodegradability with the highest weight loss in the case of fish gelatin. The films exhibit high hemocompatibility with minimal hemolysis observed. The gelatin has a dynamic effect on cell behavior and promotes long-term cell proliferation. In addition, all composite films reveal exceptionally low levels of cytotoxicity. The combination of the evaluated parameters shows the appropriate level of biocompatibility for gelatin-based samples. These findings provide valuable insights for future studies involving gelatin incorporation in tissue engineering applications.

Development of Self-Assembled Biomimetic Nanoscale Collagen-like Peptide-Based Scaffolds for Tissue Engineering: An In Silico and Laboratory Study

Development of biocomposite scaffolds has gained tremendous attention due to their potential for tissue regeneration. However, most scaffolds often contain animal-derived collagen that may elicit an immunological response, necessitating the development of new biomaterials. Herein, we developed a new collagen-like peptide,(Pro-Ala-His)10 (PAH)10, and explored its ability to be utilized as a functional biomaterial by incorporating it with a newly synthesized peptide-based self-assembled gel. The gel was prepared by conjugating a pectin derivative, galataric acid, with a pro-angiogenic peptide (LHYQDLLQLQY) and further functionalized with a cortistatin-derived peptide, (Phe-Trp-Lys-Thr)4 (FWKT)4, and the bio-ionic liquid choline acetate. The self-assembly of (PAH)10 and its interactions with the galactarate-peptide conjugates were examined using replica exchange molecular dynamics (REMD) simulations. Results revealed the formation of a multi-layered scaffold, with enhanced stability at higher temperatures. We then synthesized the scaffold and examined its physicochemical properties and its ability to integrate with aortic smooth muscle cells. The scaffold was further utilized as a bioink for bioprinting to form three-dimensional cell-scaffold matrices. Furthermore, the formation of actin filaments and elongated cell morphology was observed. These results indicate that the (PAH)10 hybrid scaffold provides a suitable environment for cell adhesion, proliferation and growth, making it a potentially valuable biomaterial for tissue engineering.

Preparation, structure characterization, and stability analysis of peptide-calcium complex derived from porcine nasal cartilage type II collagen

BACKGROUND

Porcine nasal cartilage type II collagen-derived peptides (PNCPs) may be complexed with calcium to provide a highly bioavailable, low-cost, and effective calcium food supplement. However, the calcium-binding characteristics of PNCPs have not yet been investigated. In the present study, calcium-binding peptides were derived from porcine nasal cartilage type II collagen and the resulting PNCPs-Ca complex was characterized.

RESULTS

The study reveals that the calcium-binding capacity of PNCPs is closely related to enzymatic hydrolysis conditions. The highest calcium-binding capacity of PNCPs was observed at a hydrolysis time of 4 h, temperature of 40 °C, enzyme dosage of 1%, and solid-to-liquid ratio of 1:10. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed that the PNCPs had a pronounced capacity for calcium binding, with the PNCPs-Ca complex exhibiting a clustered structure consisting of aggregated spherical particles. Fourier-transform infrared spectroscopy, fluorescence spectroscopy, X-ray diffraction, dynamic light scattering, amino acid composition, and molecular weight distribution analyses all indicated that the PNCPs and calcium complexed via the carboxyl oxygen and amino nitrogen atoms, leading to the formation of a β-sheet structure during the chelation process. In addition, the stability of the PNCPs-Ca complex was maintained over a range of pH values consistent with those found in the human gastrointestinal tract, facilitating calcium absorption.

CONCLUSION

These research findings suggest the feasibility of converting by-products from livestock processing into calcium-binding peptides, providing a scientific basis for the development of novel calcium supplements and the potential reduction of resource waste. © 2023 Society of Chemical Industry.

Low-Molecular Collagen Peptide Supplementation and Body Fat Mass in Adults Aged ≥ 50 Years: A Randomized, Double-Blind, Placebo-Controlled Trial

A randomized, double-blind, placebo-controlled trial was conducted to confirm whether collagen peptide supplementation for 12 week has a beneficial effect on body fat control in older adults at a daily physical activity level. Participants were assigned to either the collagen group (15 g/day of collagen peptide) or the placebo group (placebo drink). Body composition was measured by bioelectrical impedance analysis (BIA) and dual-energy X-ray absorptiometry (DEXA). In total, 74 participants (collagen group, n = 37; placebo group, n = 37) were included in the final analysis. The collagen group showed a significant reduction in total body fat mass compared with the placebo group, as evidenced by both BIA (p = 0.021) and DEXA (p = 0.041) measurements. Body fat mass and percent body fat of the whole body and trunk reduced at 12 weeks compared with baseline only in the collagen group (whole body: body fat mass, p = 0.002; percent body fat, p = 0.002; trunk: body fat mass, p = 0.001; percent body fat, p = 0.000). Total fat mass change (%) (collagen group, -0.49 ± 3.39; placebo group, 2.23 ± 4.20) showed a significant difference between the two groups (p = 0.041). Physical activity, dietary intake, and biochemical parameters showed no significant difference between the groups. The results confirmed that collagen peptide supplementation had a beneficial effect on body fat reduction in older adults aged ≥ 50 years with daily physical activity level. Thus, collagen peptide supplementation has a positive effect on age-related changes.

Analgesic efficacy of collagen peptide in knee osteoarthritis: a meta-analysis of randomized controlled trials

BACKGROUND

The management of knee osteoarthritis involves various treatment strategies. It is important to explore alternative therapies that are both safe and effective. Collagen peptides have emerged as a potential intervention for knee osteoarthritis. This study aims to evaluate the analgesic effects and safety of collagen peptide in patients diagnosed with knee osteoarthritis.

METHODS

We conducted a systematic literature search following the guidelines of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. Multiple databases including PubMed, Scopus, EMBASE, Web of Science, Cochrane, and ClinicalTrials.gov were searched for randomized controlled trials (RCTs) published up to 27 May 2023 that focused on the analgesic outcomes and adverse events associated with collagen peptides or hydrolyzed collagen in patients with osteoarthritis. We assessed the quality of the included studies and the strength of evidence using the Cochrane ROB 2.0 tool and Grading of Recommendations, Assessment, Development, and Evaluations.

RESULTS

Four trials involving 507 patients with knee osteoarthritis were included and analyzed using the random-effects model. All these trials were considered to have a high risk of bias. Our results revealed a significant difference in pain relief between the collagen peptide group and the placebo group in patients with knee osteoarthritis (standardized mean difference: - 0.58; 95% CI - 0.98, - 0.18, p = 0.004; I2: 68%; quality of evidence: moderate). However, there was no significant difference in the risk of adverse events between collagen peptide and placebo (odds ratio: 1.66; 95% CI 0.99, 2.78, p = 0.05; I2: 0%; quality of evidence: very low).

CONCLUSIONS

Our findings demonstrate significant pain relief in patients with knee osteoarthritis who received collagen peptides compared to those who received placebo. In addition, the risk of adverse events did not differ significantly between the collagen peptide group and the placebo group. However, due to potential biases and limitations, well-designed randomized controlled trials are needed to validate and confirm these findings.

Effect of Different Crosslinkers on Denatured Dentin Collagen's Biostability, MMP Inhibition and Mechanical Properties

OBJECTIVE

Sound, natural dentin collagen can be stabilized against enzymatic degradation through exogenous crosslinking treatment for durable bonding; however, the effect on denatured dentin (DD) collagen is unknown. Hence, the ability of different crosslinkers to enhance/restore the properties of DD collagen was assessed.

METHODS

Demineralized natural and DD collagen films (7 mm × 7 mm × 7 µm) and beams (0.8 mm × 0.8 mm × 7 mm) were prepared. DD collagen was experimentally produced by heat or acid exposure, which was then assessed by various techniques. All specimens were then treated with 1 wt% of chemical crosslinker 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/n-hydroxysuccinimide (EDC/NHS) and two structurally different flavonoids-theaflavins (TF) from black tea and type-A proanthocyanidins from cranberry juice (CR) for either 30 s or 1 h. The controls were untreated. Dentin films were assessed for chemical interaction and cross-linking effect by FTIR, biostability against exogenous collagenase by weight loss (WL) and hydroxyproline release (HYP), and endogenous matrix metalloproteinases (MMPs) activity by confocal laser microscopy. Dentin beams were evaluated for tensile properties. Data were analyzed using ANOVA and Tukey's test (α = 0.05).

RESULTS

Compared with natural collagen, DD collagen showed pronounced structural changes, altered biostability and decreased mechanical properties, which were then improved to various degrees that were dependent on the crosslinkers used, with EDC/NHS being the least effective. Surprisingly, the well-known MMP inhibitor EDC/NHS showed negligible effect on or even increased MMP activity in DD collagen. As compared with control, cross-linking induced by TF and CR significantly increased collagen biostability (reduced WL and HYP release, p < 0.05), MMP inhibition (p < 0.001) and mechanical properties (p < 0.05), regardless of denaturation.

CONCLUSIONS

DD collagen cannot or can only minimally be stabilized via EDC/NHS crosslinking; however, the challenging substrate of DD collagen can be enhanced or restored using the promising flavonoids TF and CR.

Collagen Hydrolysates: A Source of Bioactive Peptides Derived from Food Sources for the Treatment of Osteoarthritis

Osteoarthritis (OA) is the most common joint disorder, with a social and financial burden that is expected to increase in the coming years. Currently, there are no effective medications to treat it. Due to limited treatment options, patients often resort to supplements, such as collagen hydrolysates (CHs). CHs are products with low molecular weight (MW) peptides, often between 3 and 6 kDa, and are a result of industrialized processed collagen. Collagen extraction is often a by-product of the meat industry, with the main source for collagen-based products being bovine, although it can also be obtained from porcine and piscine sources. CHs have demonstrated positive results in clinical trials related to joint health, such as decreased joint pain, increased mobility, and structural joint improvements. The bioactivity of CHs is primarily attributed to their bioactive peptide (BAP) content. However, there are significant knowledge gaps regarding the digestion, bioavailability, and bioactivity of CH-derived BAPs, and how different CH products compare in that regard. The present review discusses CHs and their BAP content as potential treatments for OA.

Natural polysaccharides and their derivatives as potential medical materials and drug delivery systems for the treatment of peripheral nerve injuries

Peripheral nerve repair following injury is one of the most serious problems in neurosurgery. Clinical outcomes are often unsatisfactory and associated with a huge socioeconomic burden. Several studies have revealed the great potential of biodegradable polysaccharides for improving nerve regeneration. We review here the promising therapeutic strategies involving different types of polysaccharides and their bio-active composites for promoting nerve regeneration. Within this context, polysaccharide materials widely used for nerve repair in different forms are highlighted, including nerve guidance conduits, hydrogels, nanofibers and films. While nerve guidance conduits and hydrogels were used as main structural scaffolds, the other forms including nanofibers and films were generally used as additional supporting materials. We also discuss the issues of ease of therapeutic implementation, drug release properties and therapeutic outcomes, together with potential future directions of research.

Subacromial injection of hydrolyzed collagen in the symptomatic treatment of rotator cuff tendinopathy: an observational multicentric prospective study on 71 patients

Background

The purpose of the present observational multicentric prospective study was to evaluate the efficacy and safety of a new infiltration device (CHondroGrid, Bioteck S.p.A, Arcugnano, Italy) based on hydrolyzed collagen in the treatment of rotator cuff tendinopathy.

Methods

Seventy-one patients (53.3 ± 11.6 years old) affected by rotator cuff tendinopathy were treated in 2021 with two subacromial injections of CHondroGrid at 13 ± 2.9 days apart. The outcomes measured were the visual analog scale (VAS) score (in movement, during the night, and at rest), the Constant Score, the Simple Shoulder Test, and patient satisfaction. The outcome variables were measured before each injection, at 1 month and at 6 months after the last injection.

Results

The treatment was significantly effective from the first injection and up to the six-month follow-up. At the last follow-up, the VAS score on movement had improved by 71% (P < .001), while the VAS score at rest and during the night had ameliorated by 91% and 87%, respectively (P < .001). The Constant Score and Simple Shoulder Test improved by 32% and 61%, respectively (P < .001). No adverse events were reported.

Conclusions

CHondroGrid resulted in a safe and effective treatment in pain relief and for the functional recovery of rotator cuff tendinopathy.

Hyaluronic Acid-Extraction Methods, Sources and Applications

In this review, a compilation of articles in databases on the extraction methods and applications of hyaluronic acid (HA) was carried out. HA is a highly hydrated component of different tissues, including connective, epithelial, and neural. It is an anionic, linear glycosaminoglycan (GAG) primarily found in the native extracellular matrix (ECM) of soft connective tissues. Included in the review were studies on the extraction methods (chemical, enzymatical, combined) of HA, describing advantages and disadvantages as well as news methods of extraction. The applications of HA in food are addressed, including oral supplementation, biomaterials, medical research, and pharmaceutical and cosmetic industry applications. Subsequently, we included a section related to the structure and penetration routes of the skin, with emphasis on the benefits of systems for transdermal drug delivery nanocarriers as promoters of percutaneous absorption. Finally, the future trends on the applications of HA were included. This final section contains the effects before, during, and after the application of HA-based products.

Assessing non-synthetic crosslinkers in biomaterial inks based on polymers of marine origin to increase the shape fidelity in 3D extrusion printing

In the past decade, there has been significant progress in 3D printing research for tissue engineering (TE) using biomaterial inks made from natural and synthetic compounds. These constructs can aid in the regeneration process after tissue loss or injury, but achieving high shape fidelity is a challenge as it affects the construct's physical and biological performance with cells. In parallel with the growth of 3D bioprinting approaches, some marine-origin polymers have been studied due to their biocompatibility, biodegradability, low immunogenicity, and similarities to human extracellular matrix components, making them an excellent alternative to land mammal-origin polymers with reduced disease transmission risk and ethical concerns. In this research, collagen from shark skin, chitosan from squid pens, and fucoidan from brown algae were effectively blended for the manufacturing of an adequate biomaterial ink to achieve a printable, reproducible material with a high shape fidelity and reticulated using four different approaches (phosphate-buffered saline, cell culture medium, 6% CaCl2, and 5 mM Genipin). Materials characterization was composed by filament collapse, fusion behavior, swelling behavior, and rheological and compressive tests, which demonstrated favorable shape fidelity resulting in a stable structure without deformations, and interesting shear recovery properties around the 80% mark. Additionally, live/dead assays were conducted in order to assess the cell viability of an immortalized human mesenchymal stem cell line, seeded directly on the 3D printed constructs, which showed over 90% viable cells. Overall, the Roswell Park Memorial Institute cell culture medium promoted the adequate crosslinking of this biopolymer blend to serve the TE approach, taking advantage of its capacity to hamper pH decrease coming from the acidic biomaterial ink. While the crosslinking occurs, the pH can be easily monitored by the presence of the indicator phenol red in the cell culture medium, which reduces costs and time.

Collagen-Based Hydrogels for the Eye: A Comprehensive Review

Collagen-based hydrogels have emerged as a highly promising platform for diverse applications in ophthalmology, spanning from drug delivery systems to biomedical interventions. This review explores the diverse sources of collagen, which give rise to different types of collagen protein. The critical isolation and purification steps are discussed, emphasizing their pivotal role in preparing collagen for biomedical use. To ensure collagen quality and purity, and the suitability of collagen for targeted applications, a comprehensive characterization and quality control are essential, encompassing assessments of its physical, chemical, and biological properties. Also, various cross-linking collagen methods have been examined for providing insight into this crucial process. This comprehensive review delves into every facet of collagen and explores the wide-ranging applications of collagen-based hydrogels, with a particular emphasis on their use in drug delivery systems and their potential in diverse biomedical interventions. By consolidating current knowledge and advancements in the field, this review aims to provide a detailed overview of the utilization of engineered collagen-based hydrogels in ocular therapeutics.

Collagen-Based Dissolving Microneedles with Flexible Pedestals: A Transdermal Delivery System for Both Anti-Aging and Skin Diseases

Biocompatible polymer microneedles (MNs) are emerging as a promising platform for transdermal drug delivery, especially for facial treatments. Therefore, an MN patch in this study uses hydrolyzed collagen (HC) contained in skin cells as the main raw material and adopts a two-step cast method to develop a rapidly dissolving microneedle (DMN) to deliver collagen in a simple and minimally invasive way, allowing the release of the encapsulated drug in the skin. By optimizing the formulation and proportion of HC and auxiliary support materials, the mechanical strength required to pierce the skin is obtained, while the soft pedestal allows for flexibility in application. The DMNs can dissolve completely in the skin within 15 min and release within ≈ 8 h, and do not cause toxicity or irritation when being applied. In contrast to the ineffectiveness of oral and external application, and the high risk of dermal injection, drug-loaded DMNs overcome the drawbacks of traditional methods with direct penetration and minimally invasive manner, enabling efficient and safe treatment. The successful preparation and research of HC DMNs have innovative and practical significance in this field, and it is expected to become a simple, effective, and popular transdermal drug delivery platform for cosmetics.

Microbial exopolysaccharides in the biomedical and pharmaceutical industries

The most significant and renewable class of polymeric materials are extracellular exopolysaccharides (EPSs) produced by microorganisms. Because of their diverse chemical and structural makeup, EPSs play a variety of functions in a variety of industries, including the agricultural industry, dairy industry, biofilms, cosmetics, and others, demonstrating their biotechnological significance. EPSs are typically utilized in high-value applications, and current research has focused heavily on them because of their biocompatibility, biodegradability, and compatibility with both people and the environment. Due to their high production costs, only a few microbial EPSs have been commercially successful. The emergence of financial barriers and the growing significance of microbial EPSs in industrial and medical biotechnology has increased interest in exopolysaccharides. Since exopolysaccharides can be altered in a variety of ways, their use is expected to increase across a wide range of industries in the coming years. This review introduces some significant EPSs and their composites while concentrating on their biomedical uses.

Two-Stage Supramolecular Self-Assembly-Directed Collagen-Peptide-Decorated Liposomal Complexes of Curcumin Microspheres with Enhanced Solubility and Bioavailability

Green formulations of phytonutrients with enhanced solubility and bioavailability are of great significance in nutrition therapy. In the present contribution, we hypothesized that the collagen peptides could be a safe, natural, food-grade, and cost-effective functional agent for the surface decoration and stabilization of liposomes in powder form and hence a "green" solution for the oral delivery of phytonutrients. The present study reports a two-stage supramolecular self-assembly-directed process for the preparation of collagen peptide-decorated liposomal complexes of curcumin (CCL) [10% (w/w)] as microspheres (125 ± 25 μm) with improved solubility (1.46 × 10⁵-fold) and sustained-release properties under gastrointestinal pH conditions. The molecular self-assembly of collagen peptides around the lipid bilayers and the various noncovalent interactions and conformational changes leading to the supramolecular assembly to act as a matrix for the encapsulation of lipid vesicles of curcumin were clear from the spectroscopic studies (UV-vis, fluorescence, FTIR, and circular dichroism). Further investigation of pharmacokinetics following a randomized double-blinded controlled trial on healthy volunteers (n = 15) demonstrated that the oral administration of 2.5 g of CCL sachet (250 mg of curcumin) enhanced the plasma concentration (C_max: 118 vs. 4.3 ng/mL), the elimination half-life (4.2 vs. 0.7 h), and bioavailability as per the area under the curve over 12 h [AUC_0-12h (CCL) = 506·8 vs. AUC_0-12h (C95) = 9.47 (53-fold)], when the plasma concentration of curcumin was estimated with triple quadruple tandem mass spectrometry (UPLC-ESI-MS/MS).

Advances in nutritional supplementation for sarcopenia management

Sarcopenia is a syndrome characterized by a decline in muscular mass, strength, and function with advancing age. The risk of falls, fragility, hospitalization, and death is considerably increased in the senior population due to sarcopenia. Although there is no conclusive evidence for drug treatment, resistance training has been unanimously recognized as a first-line treatment for managing sarcopenia, and numerous studies have also pointed to the combination of nutritional supplementation and resistance training as a more effective intervention to improve quality of life for people with sarcopenia. People with both malnutrition and sarcopenia have a higher mortality rate, so identifying people at risk of malnutrition and intervening early is extremely important to avoid sarcopenia and its associated problems. This article provides important information for dietary interventions in sarcopenia by summarizing the discoveries and developments of nutritional supplements such as protein, leucine, β-hydroxy-β-methylbutyric acid, vitamin D, vitamin C, vitamin E, omega-3 fatty acids, creatine, inorganic nitrate, probiotics, minerals, collagen peptides, and polyphenols in the management of sarcopenia.

Unveiling the Potential of Marine Biopolymers: Sources, Classification, and Diverse Food Applications

Environmental concerns regarding the usage of nonrenewable materials are driving up the demand for biodegradable marine biopolymers. Marine biopolymers are gaining increasing attention as sustainable alternatives in various industries, including the food sector. This review article aims to provide a comprehensive overview of marine biopolymers and their applications in the food industry. Marine sources are given attention as innovative resources for the production of sea-originated biopolymers, such as agar, alginate, chitin/chitosan, and carrageenan, which are safe, biodegradable, and are widely employed in a broad spectrum of industrial uses. This article begins by discussing the diverse source materials of marine biopolymers, which encompass biopolymers derived from seaweed and marine animals. It explores the unique characteristics and properties of these biopolymers, highlighting their potential for food applications. Furthermore, this review presents a classification of marine biopolymers, categorizing them based on their chemical composition and structural properties. This classification provides a framework for understanding the versatility and functionality of different marine biopolymers in food systems. This article also delves into the various food applications of marine biopolymers across different sectors, including meat, milk products, fruits, and vegetables. Thus, the motive of this review article is to offer a brief outline of (a) the source materials of marine biopolymers, which incorporates marine biopolymers derived from seaweed and marine animals, (b) a marine biopolymer classification, and (c) the various food applications in different food systems such as meat, milk products, fruits, and vegetables.

Study of Elastin, Hydrolyzed Collagen and Collagen-like Products in a Tri-Layered Chitosan Membrane to Test Anti-Aging Skin Properties

The use of animal testing in the cosmetic industry is already prohibited in more than 40 countries, including those of the EU. The pressure for it to be banned worldwide in the future is increasing, so the need for animal alternatives is of great interest today. In addition, using animals and humans in scientific research is ethically reprehensible. This study aimed to prove some of the anti-aging properties of elastin (EL), hydrolyzed collagen (HC), and two vegan collagen-like products (Veg Col) in a tri-layered chitosan membrane that was ionically crosslinked with sodium tripolyphosphate (TPP). In the first approach, as a way of representing different layers of a biological system, such as the epidermis and the two dermis sublayers, EL, HC, or Veg Col were independently introduced into the two inner layers (2L_(i+b)). Their effects were compared with those of their introduction into three layers (3L). Different experiments were performed on the membrane to test its elasticity, hydration, moisture retention, and pore reduction at different concentrations of EL, HC, and Veg Col, and the results were normalized vs. a blank membrane. This new alternative to animal or human testing can be suitable for proving certain efficacy claims for active ingredients or products in the pharmaceutical, nutritional, and cosmetic fields.

Recent development in multizonal scaffolds for osteochondral regeneration

Osteochondral (OC) repair is an extremely challenging topic due to the complex biphasic structure and poor intrinsic regenerative capability of natural osteochondral tissue. In contrast to the current surgical approaches which yield only short-term relief of symptoms, tissue engineering strategy has been shown more promising outcomes in treating OC defects since its emergence in the 1990s. In particular, the use of multizonal scaffolds (MZSs) that mimic the gradient transitions, from cartilage surface to the subchondral bone with either continuous or discontinuous compositions, structures, and properties of natural OC tissue, has been gaining momentum in recent years. Scrutinizing the latest developments in the field, this review offers a comprehensive summary of recent advances, current hurdles, and future perspectives of OC repair, particularly the use of MZSs including bilayered, trilayered, multilayered, and gradient scaffolds, by bringing together onerous demands of architecture designs, material selections, manufacturing techniques as well as the choices of growth factors and cells, each of which possesses its unique challenges and opportunities.

Chicken Cartilage-Derived Carbon for Efficient Xylene Removal

Chicken cartilage was used for the first time as a raw material for the microwave-assisted synthesis of biochar and activated carbon. Various microwave absorbers, i.e., commercial active carbon, scrap tyres, silicon carbide, and chicken bone-derived biochar, as well as various microwave powers, were tested for their effect on the rate of pyrolysis and the type of products formed. Biochars synthesised under 400 W in the presence of scrap tyres and chicken bone-derived biochar were activated with KOH and K₂CO₃ with detergent to produce activated carbon with a highly developed porous structure that would be able to effectively adsorb xylene vapours. All carbons were thoroughly characterised (infrared spectroscopy, X-ray fluorescence spectrometry, nitrogen adsorption/desorption, Raman spectroscopy, proximate and ultimate analysis) and tested as xylene sorbents in dynamic systems. It was found that the activation causes an increase of up to 1042 m²·g^-1 in the specific surface area, which ensures the sorption capacity of xylene about 300 mg·g^-1. Studies of the composition of biogas emitted during pyrolysis revealed that particularly valuable gaseous products are formed when pyrolysis is carried out in the presence of silicon carbide as a microwave absorber.

Ceftriaxone-Loaded Polymeric Microneedles, Dressings, and Microfibers for Wound Treatment

The objective of this study was to create polymeric dressings, microfibers, and microneedles (MN) loaded with ceftriaxone, using PMVA (Poly (Methyl vinyl ether-alt-maleic acid), Kollicoat^® 100P, and Kollicoat^® Protect as polymers to treat diabetic wounds and accelerate their recovery. These formulations were optimized through a series of experiments and were subsequently subjected to physicochemical tests. The results of the characterization of the dressings, microfibers, and microneedles (PMVA and 100P) were, respectively, a bioadhesion of 281.34, 720, 720, 2487, and 510.5 gf; a post-humectation bioadhesion of 186.34, 831.5, 2380, and 630.5 gf, tear strength of 2200, 1233, 1562, and 385 gf, erythema of 358, 8.4, 227, and 188; transepidermal water loss (TEWL) of 2.6, 4.7, 1.9, and 5.2 g/h·m²; hydration of 76.1, 89.9, 73.5, and 83.5%; pH of 4.85, 5.40, 5.85, and 4.85; and drug release (Peppas kinetics release) of n: 0.53, n: 0.62, n: 0.62, and n: 0.66). In vitro studies were performed on Franz-type diffusion cells and indicated flux of 57.1, 145.4, 718.7, and 2.7 µg/cm²; permeation coefficient (Kp) of 13.2, 19.56, 42, and 0.00015 cm²/h; and time lag (t_L) of 6.29, 17.61, 27. 49, and 22.3 h, respectively, in wounded skin. There was no passage of ceftriaxone from dressings and microfibers to healthy skin, but that was not the case for PMVA/100P and Kollicoat^® 100P microneedles, which exhibited flux of 194 and 0.4 µg/cm², Kp of 11.3 and 0.00002 cm²/h, and t_L of 5.2 and 9.7 h, respectively. The healing time of the formulations in vivo (tests carried out using diabetic Wistar rats) was under 14 days. In summary, polymeric dressings, microfibers, and microneedles loaded with ceftriaxone were developed. These formulations have the potential to address the challenges associated with chronic wounds, such as diabetic foot, improving the outcomes.

Improving the Sustainability of Processing By-Products: Extraction and Recent Biological Activities of Collagen Peptides

Society and consumers are increasingly concerned about food safety and the sustainability of food production systems. A significant amount of by-products and discards are generated during the processing of aquatic animals, which still needs to be fully utilized by the food industry. The management and sustainable use of these resources are essential to avoiding environmental pollution and resource waste. These by-products are rich in biologically active proteins, which can be converted into peptides by enzymatic hydrolysis or fermentation treatment. Therefore, exploring the extraction of collagen peptides from these by-products using an enzymatic hydrolysis technology has attracted a wide range of attention from numerous researchers. Collagen peptides have been found to possess multiple biological activities, including antioxidant, anticancer, antitumor, hypotensive, hypoglycemic, and anti-inflammatory properties. These properties can enhance the physiological functions of organisms and make collagen peptides useful as ingredients in food, pharmaceuticals, or cosmetics. This paper reviews the general methods for extracting collagen peptides from various processing by-products of aquatic animals, including fish skin, scales, bones, and offal. It also summarizes the functional activities of collagen peptides as well as their applications.

Peptide-triggered self-assembly of collagen mimetic peptides into nanospheres by electrostatic interaction and π-π stacking

Collagen is the most abundant protein in various connective tissues, providing mechanical integrity as well as regulating cellular activities. Self-assembled peptides have been extensively explored to develop collagen mimetic materials, due to their attractive features such as easy synthesis, selective sequences and low immunogenicity. Metal ion-triggered self-assembly of collagen mimetic peptides has recently received increasing interests, since the addition of external stimuli offers programmable control of the self-assembly process. We have for the first time reported a peptide-stimulated self-assembly of collagen mimetic peptides into nanospheres by electrostatic interaction and π-π stacking. We have accidentally discovered that FAM-modified positively-charged triple helical peptide FAM-PRG was highly soluble, while the addition of a single-stranded negatively-charged peptide EOG-10 efficiently drove its self-assembly into well-ordered spherical nanomaterials. Peptide EOG-10 has been shown to mediate similar self-assembly of TPE-modified triple-helical peptide TPE-PRG into luminescent exquisite nanospheres, consistently demonstrating the robustness of this peptide-triggered strategy. Fluorescence monitoring of the interaction of EOG-10 and TPE-PRG at different ratios indicated that EOG-10 specifically binds to TPE-PRG to form a 3 : 1 complex. High salt concentration was shown to inhibit the self-assembly of TPE-PRG with EOG-10, suggesting that their self-assembly was controlled by electrostatic interaction. The self-assembly of TPE-PRG with EOG-10 has been further revealed to require the exact lengths of both peptides as well as complementary sequences without mutations, indicating a pairwise "side-by-side" binding mode. Notably, the identity of the N-terminal residues of X-PRG has been found to play a determinant role in the self-assembly, while non-aromatic residues lost the self-assembling capability, suggesting that π-π stacking and electrostatic interactions collectively modulate the self-assembly of X-PRG and EOG-10. To conclude, we have developed a highly biocompatible and programmably controlled peptide-triggered self-assembly approach to create novel collagen mimetic nanomaterials, which may have great potential in advanced functional materials.