Macroplastic Storage and Remobilization in Rivers

Quantification, characterization, and source identification of macro- and mesoplastics in the water column of Rivers Sabaki and Tana

Five sampling campaigns were conducted in the water columns of River Sabaki and Tana in Kenya, Between October 2021 and January 2023, covering a 1-year cycle, at four sites in River Sabaki (2.5 km, 3.05 km, 3.51 km, and 4.52 km) and River Tana (1.5 km, 1.8 km, 2.0 km, and 2.5 km) distant from the river mouth. The ebb and flood tides were sampled to calculate net plastic litter fluxes. Two 6350-µm seine nets were deployed in two replicates per sampling point. Factor and cluster analysis were used to investigate plastic litter sources for both rivers. The influences of rainfall on plastic abundance and mass were explored using permutational linear models. A total of 15,318 plastic litter items weighing 1.37 kg were recorded in River Sabaki, and 3741 plastic litter items weighing 0.95 kg in River Tana. The top ten captured plastic litter types sorted by abundance and mass were mostly plastic fragments. The annual net plastic litter flux to the ocean through River Sabaki amounted to 1,277,120.63 items year-1 by abundance and 22.30 kg year-1 by mass. For River Tana, the same fluxes were 207,550.76 items year-1, and 28.09 kg year-1, respectively. In River Sabaki, significant impacts of rainfall on plastic abundance and mass were found. River Sabaki's pollution sources included upstream reaches, fishing activities, and littering by locals and tourists. River Tana's major pollution sources were illegal dumpsites, littering, fishing, and recreational activities. This research can guide combat plastic pollution in the rivers and ultimately the ocean.

Riparian vegetation entraps macroplastics along the entire river course: implications for eco-safety activities and mitigation strategies

Macroplastic litter causes detrimental effects on freshwater biota affecting human health. Despite the significant role of rivers in transporting plastic waste, most plastics remain in fluvial ecosystems, accumulating in infrastructure, river sediment, and (riverbank) vegetated areas. However, the entrapment of plastics by riparian vegetation was overlooked, particularly in upper and middle river courses. For the first time, we aimed to quantify the entrapment of plastics by riparian vegetation along the entire river course. Sampling riparian areas in the upper, middle, and lower river courses in central Italy, we found 1,548 macrolitter items, with vegetation entrapping 93.9% of total litter. Riverbank and riparian plastics acted as long-term indicators of river plastics. We emphasized the trapping efficiency at the species level highlighting that the best plastic trapper species were trees, shrubs and reeds (Populus spp., Salix spp., Rubus ulmifolius, Phragmites australis, and Ficus carica), blocking 85.4% of the total macrolitter entrapped by plants. Plastic pieces, bags, bandages, sanitary items, and packaging were among the most trapped types. Furthermore, vegetation in the lower river course exhibited greater plastic entrapment compared to the upper and middle courses, following the fact that all the river courses contribute to plastic pollution. Recognizing the potential of riparian vegetation as a valuable ecosystem service in trapping macroplastics, further research should explore the characteristics and structures of riparian communities involved in this process. By developing eco-safe practices and mitigation strategies based on these findings, we might contribute significantly to managing, conserving, and restoring riverine ecosystems.

Plastic debris exposure and effects in rivers: Boundaries for efficient ecological risk assessment

Until recently, plastic pollution research was focused on the marine environments, and attention was given to terrestrial and freshwater environments latter. This discussion paper aims to put forward crucial questions on issues that limit our ability to conduct reliable plastic ecological risk assessments in rivers. Previous studies highlighted the widespread presence of plastics in rivers, but the sources and levels of exposure remained matters of debate. Field measurements have been carried out on the concentration and composition of plastics in rivers, but greater homogeneity in the choice of plastic sizes, particularly for microplastics by following the recent ISO international standard nomenclature, is needed for better comparison between studies. The development of additional relevant sampling strategies that are suited to the specific characteristics of riverine environments is also needed. Similarly, we encourage the systematic real-time monitoring of environmental conditions (e.g., topology of the sampling section of the river, hydrology, volumetric flux and velocity, suspended matters concentration) to better understand the origin of variability in plastic concentrations in rivers. Furthermore, ingestion of microplastics by freshwater organisms has been demonstrated under laboratory conditions, but the long-term effects of continuous microplastic exposure in organisms are less well understood. This discussion paper encourages an integrative view of the issues involved in assessing plastic exposure and its effects on biota, in order to improve our ability to carry out relevant ecological risk assessments in river environments.

Monitoring macroplastics in aquatic and terrestrial ecosystems: Expert survey reveals visual and drone-based census as most effective techniques

Anthropogenic litter, such as plastic, is investigated by the global scientific community from various fields employing diverse techniques. The goal is to assess and finally mitigate the pollutants' impacts on the natural environment. Plastic litter can accumulate in different matrices of aquatic and terrestrial ecosystems, impacting both biota and ecosystem functioning. Detection and quantification of macroplastics, and other litter, can be realized by jointly using visual census and remote sensing techniques. The primary objective of this research was to identify the most effective approach for monitoring macroplastic litter in riverine and marine environments through a comprehensive survey based on the experiences of the scientific community. Researchers involved in plastic pollution evaluated four litter occurrence and flux investigation methods (visual census, drone-based surveys, satellite imagery, and GPS/GNSS trackers) through a questionnaire. Traditional visual census and drone deployment were deemed as the most popular approaches among the 46 surveyed researchers, while satellite imagery and GPS/GNSS trackers received lower scores due to limited field validation and short performance ranges, respectively. On a scale from 0 to 5, visual census and drone-based surveys obtained 3.5 and 2.0, respectively, whereas satellite imagery and alternative solutions received scores lower than 1.2. Visual and drone censuses were used in high, medium and low-income countries, while satellite census and GPS/GNSS trackers were mostly used in high-income countries. This work provides an overview of the advantages and drawbacks of litter investigation techniques, contributing i) to the global harmonization of macroplastic litter monitoring and ii) providing a starting point for researchers and water managers approaching this topic. This work supports the selection and design of reliable and cost-effective monitoring approaches to mitigate the ambiguity in macroplastic data collection, contributing to the global harmonization of macroplastic litter monitoring protocols.

Revealing the role of land-use features on macrolitter distribution in Swiss freshwaters

Macrolitter, especially macroplastics, (> 0.5 cm) negatively impact freshwater ecosystems, where they can be retained along lake shores, riverbanks, floodplains or bed sediments. Long-term and large-scale assessments of macrolitter on riverbanks and lake shores provide an understanding of litter abundance, composition, and origin in freshwater systems. Combining macrolitter quantification with hydrometeorological variables allows further study of leakage, transport, and accumulation characteristics. Several studies have explored the role of hydrometeorological factors in influencing macrolitter distribution and found that river discharge, runoff, and wind only partially explains its distribution. Other factors, such as land-use features, have not yet been thoroughly investigated. In this study, we provide a country-scale assessment of land-use influence on macrolitter abundance in freshwater systems. We analyzed the composition of the most commonly found macrolitter items (referred to as 'top items', n = 42,565) sampled across lake shores and riverbanks in Switzerland between April 2020 and May 2021. We explored the relationship between eleven land-use features and macrolitter abundance at survey locations (n = 143). The land-use features included buildings, city centers, public infrastructure, recreational areas, forests, marshlands, vineyards, orchards, other land, and rivers and canals. The majority of top items are significantly and positively correlated with land-use features related to urban coverage, notably roads and buildings. Over 60% of top items were found to be correlated with either roads or buildings. Notably, tobacco, food and beverage-related products, as well as packaging and sanitary products, showed strong associations with these urban land-use features. Other types of items, however, did not exhibit a relationship with land-use features, such as industry and construction-related items. Ultimately, this highlights the need to combine measures at the local and regional/national scales for effective litter reduction.

First attempt to measure macroplastic fragmentation in rivers

Direct field measurements of macroplastic fragmentation during its transport in rivers are currently unavailable, and there is no established method to perform them. Previous studies have showed that macroplastic fragmentation results in the production of harmful microplastics, and river channels can be hotspots for this process. Therefore, obtaining information about this process is crucial for quantifying the production of secondary microplastics in rivers and assessing the related risks for riverine biota and human health. Here, we propose a simple low-cost methodology for quantifying riverine macroplastic fragmentation by conducting repeated measurements of the mass of tagged macroplastic items before and after their transport in the river. As a proof-of-concept for this method, we conducted a 52-65 day experiment that allowed us to measure a median fragmentation rate of 0.044 ± 0.012 g for 1-liter PET bottles during their transport at low to medium flow in the middle mountain Skawa River in the Polish Carpathians. Using the obtained data (n = 42), we extrapolated that during low to medium flows, the median yearly mass loss of PET bottles in the study section is 0.26 ± 0.012 g/year (0.78 ± 0.036 % of bottle mass), and the median rate of bottle surface degradation is 3.13 ± 0.14 μm/year. These estimates suggest a relatively high fragmentation rate for a PET bottle in a mountain river even under low to medium flow conditions without high-energy transport. We discuss how our simple and relatively low-cost methodology can be flexibly adapted and future optimized to quantify macroplastic fragmentation in various types of rivers and their compartments, informing future mitigation efforts about the rates of formation and dispersion of secondary microplastics.

Macroplastic Fate and Transport Modeling: Freshwaters Act as Main Reservoirs

Macroplastic fate and transport in the freshwater environment are of great concern due to the potentially harmful effects of macroplastic on plants, animals, and humans. Here, we present a modeling approach to simulate macroplastic fate and transport at the country scale based on an existing plastic release model. The fate model was parametrized through available monitoring data and results from field experiments and applied to Swiss rivers and lakes. We found that almost all (98%) macroplastic emissions into freshwater remain within Switzerland. After exploring the influences of weirs, retention in rivers, and retention in lakes through a sensitivity analysis, we found a high retention variability across different catchments and within rivers. In all 22 analyzed scenarios for continuous retention along each river bank (i.e., beaching), we found that at least 70% of input emissions into the water bodies would be retained long-term in the catchments (about 200 g per river km and year). Across all catchments, we found a dominance of "continuous retention" through beaching along the entire river length compared with "point retention" at weirs or lakes. Thus, by modeling macroplastic fate and transport on a country level for the first time, we were able to confirm the concept of "rivers as plastic reservoirs" through modeling.

Mini-Open Dumps in the Paraná River Floodplain: Local Problems with Global Effects

The growing production of urban solid waste is a structural problem faced by most cities around the world. The proliferation of mini-open dumps (MOD; small spontaneous open-air waste dumps formed in urban and peri-urban areas) on the banks of the Paraná River is particularly evident. During the historical drought (June-December 2021), we carried out sampling campaigns identifying MODs of the Santa Fe River, a secondary channel of the Paraná River. MOD were geolocated, measured, described and classified by origin. The distance to the river and other sensitive places was considered (houses-schools-health facilities). Our results suggested a serious environmental issue associated with poor waste management. MOD were extremely abundant in the study area, being mostly composed of domestic litter. Plastics clearly dominated the MOD composition. Burning was frequently observed as a method to reduce the volume of MOD. We concluded that the proliferation of MOD is a multi-causal problem associated with a failure of public policies and a lack of environmental education.

Microplastic pollution responses to spatial and seasonal variations and water level management in a polymictic tropical reservoir (São Paulo, Brazil)

We assessed microplastic (μP) pollution in water and sediment samples during the dry and rainy season (October/2018 and March/2019, respectively) from the Guarapiranga Reservoir in the Metropolitan Region of São Paulo, Brazil, which provides drinking water for up to 5.2 million people. The concentration of mPs varied spatially and seasonally, with the higher concentrations observed near the urbanized areas and during the dry season. Water column concentrations ranged from 150 to 3100 particles/m3 and 0.07-25.05 mm3 plastic/m3 water during the dry season, and 70-7900 particles/m3 and 0.06-4.57 mm3 plastic/m3 water during the rainy season. Sediment samples were collected only during the rainy season, with concentrations ranging from 210 to 22,999 particles/kg dry weight and 0.15-111.46 mm3/kg dry weight. The particle size distribution exhibited seasonal variation, with μPs >1 mm predominating during the dry season, constituting 60-75% of all particles. In terms of quantity, fibers accounted for the majority of microplastics, comprising 55-95% during the dry season and 70-92% during the rainy season. However, when considering particle volume, irregular particles dominated in some samples, accounting for up to 95% of the total amount. The predominant colors of microplastics were white/crystal, black, and blue, with the main compositions identified as polypropylene (PP) and polyethylene terephthalate (PET), suggesting the influence of untreated domestic sewage discharge. Additionally, some additives were detected, including the pigments Fast RED ITR and phthalocyanine blue. The management of reservoir water levels appears to influence the quantity of μPs in the water column. As the water level increases up to 90% of the reservoir capacity during the rainy season, the amount of μPs in the water decreases, despite the higher influx of particles resulting from surface runoff caused by rainy conditions. This suggests a "dilution" effect combined to the polymictic mixing hydrodynamics. Our results may contribute to the creation and improvement of monitoring programs regarding mP pollution and to the adoption of specific public policies, which are still lacking in legislation.

The effect of groyne field on trapping macroplastic. Preliminary results from laboratory experiments

Macroplastic, a precursor of microplastic pollution, has become a new scope of research interest. However, the physical processes of macroplastic transport and deposition in rivers are poorly understood, which makes the decisions of where to locate macroplastic trapping infrastructure difficult. In this research, we conducted a series of experiments in a laboratory channel, exploring the impact of groynes and flexible artificial vegetation on the floating macroplastic litter. The goal was to investigate the litter paths with different obstruction arrangements, which was done by implementing a particle tracking technique on video recordings from each experimental run. We found that increasing discharge correlated with the number of plastic litter floating into the recirculation zone within the groyne fields, especially if the upstream groyne had an extended length. This produced a strong mixing interface between the main flow and the groyne field, while a vegetation patch added in the same groyne field changed the paths of plastic litter by deflecting the flow. We noticed that during a moderate discharge rate, the litter pieces flowing into the groyne field with the vegetation circulated there for the longest period, and some of them got entangled between floating stems when discharge was at its lowest. This phenomenon points to the conclusion that low flow velocity paired with the presence of vegetation can be a primer for plastic deposition and consequently, its degradation. The insights from the experiment allowed us to recommend a place downstream of an extended groyne as the desirable (efficient) area for installing a plastic trapping infrastructure or conducting plastic cleaning actions.

Microplastic infiltration into mobile sediments

This study investigates the dynamics of microplastic infiltration into non-stationary sandy sediments, a pressing environmental concern due to the rising prevalence of microplastics in aquatic ecosystems. An annular flume was used to simulate riverine bedform motion, examining the suspension and infiltration of denser-than-water microplastic particles, including polyvinyl chloride (PVC), polyamide (PA), and polylactide (PLA). The experiments focused on various particle sizes (ranging from 0.2 to 5 mm in diameter) and bedform migration speeds, known as celerities. The findings indicate that particle size is a significant factor influencing the depth of infiltration and distribution within sediment layers, whereas the impact of bedform celerities and particle densities appears less significant. This research provides novel insights into the behavior of microplastics in dynamic sedimentary environments, highlighting the intricate interaction between microplastic characteristics and sedimentary processes. The results contribute to an enhanced understanding of microplastic distribution and accumulation in riverine systems, offering crucial data for developing predictive models and formulating potential remediation strategies for microplastic pollution.

Plastic does not simply flow into the sea: River transport dynamics affected by tides and floating plants

Plastic pollution is ubiquitous in aquatic environments worldwide. Rivers connect terrestrial and marine ecosystems, playing a key role in the transport of land-based plastic waste towards the sea. Emerging research suggests that in estuaries and tidal rivers, tidal dynamics play a significant role in plastic transport and retention dynamics. To date, observations in these systems have been limited, and plastic transport dynamics during single tidal cycles remain poorly understood. Here, we investigated plastic transport, trapping, and re-mobilization of macroplastics (> 0.5 cm) in the Saigon River, focusing on short-term dynamics of individual tidal cycles. We used GPS trackers, released at different stages of the tidal cycle (ebb, flood, neap, spring). Plastic items demonstrated dynamic and intermittent transport behavior. Items spent almost half of the time (49%) temporarily stopped, mainly due to their entrapment in vegetation, infrastructure, or deposition on riverbanks. Items were almost always re-mobilized within 10 h (85%), leading to successive phases of stopping and transport. Tidal dynamics also resulted in bidirectional transport of plastic items, with median daily total transport distance within the 40 km study reach (8.9 km day-1) over four times larger than the median daily net distance (2.0 km day-1). The median retention time of plastic items within the reach was 21 days (mean = 202 days). In total, 81% of the retrieved items were trapped within water hyacinths, emphasizing the important role of floating vegetation on river plastic transport dynamics. With this paper, we aim to provide data-driven insights into macroplastic transport and retention dynamics in a tropical tidal river. These are crucial in the design of effective intervention and monitoring strategies, and estimating net plastic emission from rivers into the sea.

Spatial accumulation of flood-driven riverside litter in two Northern Atlantic Rivers

The escalation of litter accumulation in aquatic environments is recognized as an emerging global concern. Although rivers represent the main conduits for land-based waste into the oceans, the spatial dynamics of litter accumulation in these systems remain poorly investigated, especially after hydro-climatic extreme events. Floods have been identified as major drivers of litter mobilization, including macroplastics, within rivers. However, predicting flood-induced litter accumulation along riverbanks is complex due to the cumulative interplay of multiple environmental (geomorphological and riparian) and anthropogenic factors. Using empirical data collected from 14 stream reaches in two Northern Atlantic rivers in Portugal, our study evaluates which factors, among geomorphological, riparian, and anthropogenic descriptors, best drive riverside litter accumulation after floods. Taking into account the longitudinal gradient and the spatial heterogeneity of the studied reaches, our study enhances how the accumulation and characteristics (type, size) of riverside litter vary across a rural-urban continuum. Our model reveals that the combination of the human population density and the stream slope at river reach showed the highest explanatory power for the accumulation of riverside litter. Our findings indicate that litter tends to be retained close to the source, even under flood conditions. We also found that the structure of riparian vegetation showed low explanatory power for litter accumulation. However, riparian trapping could be influenced by litter input (density and type) which varies with anthropogenic activities. This work highlights the importance of gathering field data to identify critical areas of riverside litter accumulation within river basins. Our findings can further support environmental managers in designing and implementing effective cleanup campaigns and implementing plastic recovery strategies at specific areas. Nevertheless, it is crucial to enhance coordinated efforts across the entire value chain to reduce plastic pollution, promote innovative approaches for plastic litter valorization, and establish effective prevention pathways.

Macrolitter budget and spatial distribution in a groyne field along the Waal river

Current research on riverine macrolitter does not yet provide a theoretic framework on the dynamics behind its accumulation and distribution along riverbanks. In an attempt to better understand these dynamics a detailed field survey of three months was conducted in which location of macrolitter items within a single groyne field along the Waal riverbanks was tracked. The data provided insight into the daily changing patterns of spatial item distribution with respect to the waterline. Furthermore, the rates of item uptake and deposition were monitored and related to hydrologic fluctuations. Uptake was initiated by rising water levels and was generally higher when the water level increased faster. Deposition occurred continuously, despite hydrologic fluctuations. This caused the riverbank macrolitter budget to be positive during stable or dropping water levels and negative during rising water levels. Although the results show clear patterns an extended monitoring duration is required to fully understand the fate of plastic objects.

Monthly variation and transport of microplastics from the Soan River into the Indus River

The presence of plastic and microplastic pollution in freshwater systems receives extensive concerns for its accumulative trend and potential ecological impacts. This is the first annual study that investigated the monthly profile of plastic pollution in the mouth of the Soan River. Plastic pollutants comprising microplastic content up to 91.7 % were abundantly found during different seasons around the year, ranging from 132.7 items/m3 to 641.3 items/m3. The average abundance of plastics was significantly higher in August (641.3 ± 23.7 items/m3) than in other months. Overall, fibers, large microplastics (L-MPs), and transparent items were dominant by shape (57.7 %), size (61.9 %), and color (24.6 %), respectively. The highest average number of fibers (374.3/m3) and L-MPs (396 items/m3) were recorded during May and remained higher in the surface water from December to May. Fragments (432.3/m3) and S-MPs were observed higher (362.3 items/m3) during the peak rainy month of the summer monsoon season (August). Variations in the abundance and morphotypes were seemingly not only influenced by the seasonal change but also might be due to hydromorphological characteristics of the river, especially riverbed morphology, and the flow of the water. Only 5.2 % of the total items found were identified using μ-FTIR (micro-Fourier Transformed Infrared Spectroscope) which consisted of 70.7 % plastic items. Spectroscopy revealed that polyethylene terephthalate was an abundantly found polymer that largely prevailed in the form of fibers, followed by polypropylene and polyethylene. Most of the fragments, foams, and films were composed of polypropylene, polystyrene, and rayon respectively. Being an urban river, the polymeric profile demonstrated that anthropogenic activities had a significant impact on polluting the river. These findings are a very important source to understand the profile of plastic pollution in the Soan River and also a significant reference for policy-making in controlling plastic pollution among the riverine networks.

Macroplastic fragmentation in rivers

The process of macroplastic (>0.5 cm) fragmentation results in the production of smaller plastic particles, which threaten biota and human health and are difficult to remove from the environment. The global coverage and long retention times of macroplastic waste in fluvial systems (ranging from years to centuries) create long-lasting and widespread potential for its fragmentation and the production of secondary micro- and nanoplastics. However, the pathways and rates of this process are mostly unknown and existing experimental data not fully informative, which constitutes a fundamental knowledge gap in our understanding of macroplastic fate in rivers and the transfer of produced microparticles throughout the environment. Here we present a conceptual framework which identifies two types of riverine macroplastic fragmentation controls: intrinsic (resulting from plastic item properties) and extrinsic (resulting from river characteristics and climate). First, based on the existing literature, we identify the intrinsic properties of macroplastic items that make them particularly prone to fragmentation (e.g., film shape, low polymer resistance, previous weathering). Second, we formulate a conceptual model showing how extrinsic controls can modulate the intensity of macroplastic fragmentation in perennial and intermittent rivers. Using this model, we hypothesize that the inundated parts of perennial river channels-as specific zones exposed to the constant transfer of water and sediments-provide particular conditions that accelerate the physical fragmentation of macroplastics resulting from their mechanical interactions with water, sediments, and riverbeds. The unvegetated areas in the non-inundated parts of perennial river channels provide conditions for biochemical fragmentation via photo-oxidation. In intermittent rivers, the whole channel zone is hypothesized to favor both the physical and biochemical fragmentation of macroplastics, with the dominance of the mechanical type during the periods with water flow. Our conceptualization aims to support future experimental and modelling works quantifying plastic footprint of different macroplastic waste in different types of rivers.

Evaluation of vertical distribution characteristics of microplastics under 20 μm in lake and river waters in South Korea

Following the alarming reports of microplastic pollution in the marine environment, increased attention has been given to microplastics in other environmental media. Despite the attention, there is limited research available on the depth-distribution of microplastics in freshwater. Specifically, in the case of water sources used for drinking or tap, the height of intake facilities varies, and it is highly likely that there is a correlation between the vertical distribution of microplastics and these water intake structures. Further, because the size of microplastics varies widely in the environment, the commonly used sampling devices are not suitable for selectively extracting microplastics without causing cross-contamination. Thus, we developed a suitable device for microplastics of size 5-20 µm and studied microplastic distribution in freshwater at various depths by considering various types of microplastics and aqueous systems. Lake and river, two major water sources, were selected for the study of microplastics distribution in water system. The microplastic distribution characteristics in both water systems showed that polypropylene and polyethylene were the most abundant across all depths because of their production volume. Plastic types with higher density were found only at the lower layers, and polystyrene was found in the upper layers because of the environmental effects on its buoyancy caused pore diameter and surface area. The lake and river had higher microplastic distribution in the lower layer and upper layer, respectively. This was because the flow rate in river was higher than that of lake. The higher flow rate reduced the settling velocity in river. Thus, hydrodynamic stability influences the vertical distribution and concentrations of microplastics in the water systems. These results are expected to be used for understanding the behavioral characteristics of microplastics in water systems and to manage water sources.

Advancing plastic pollution hotspotting at the subnational level: Brazil as a case study in the Global South

Identifying sources is crucial for proposing effective actions to combat marine litter pollution. Here, we used an innovative approach to identify hotspots of mismanaged plastic waste (MPW) within Brazil and subsequent leakage to the ocean, based on population density, socio-economic conditions, municipal solid waste management and environmental parameters. We estimated plastic waste generation and MPW for each of the 5570 Brazilian municipalities, which totaled 3.44 million metric tons per year. Then, we estimated the probability of litter mobilization and transport (P) and the relative risk of leakage to the ocean (MPW × P). The Guanabara Bay and La Plata River comprised the main oceanic entry hotspots of litter produced in Brazil. The use of national databases allowed us to increase spatial and temporal granularity, offering a detailed baseline for the application of prevention and mitigation actions. However, overcoming data limitations is still a challenge in Brazil as in other Global South countries.

Plastic pollution in riverbeds fundamentally affects natural sand transport processes

Over the past 50 years, rivers have become increasingly important vectors for plastic pollution. Lowland riverbeds exhibit coherent morphological features including ripple and dune bedforms, which transport sediment downstream via well-understood processes, yet the impact of plastic on sediment transport mechanics is largely unknown. Here we use flume tank experiments to show that when plastic particles are introduced to sandy riverbeds, even at relatively low concentrations, novel bedform morphologies and altered processes emerge, including irregular bedform stoss erosion and dune "washout", causing topographic bedform amplitudes to decline. We detail (i) new mechanisms of plastic incorporation and transport in riverbed dunes, and (ii) how sedimentary processes are fundamentally influenced. Our laboratory flume tank experiments suggest that plastic is not a passive component of river systems but directly affects bed topography and locally increases the proportion of sand suspended in the water column, which at larger scales, has the potential to impact river ecosystems and wider landscapes. The resulting plastic distribution in the sediment is heterogeneous, highlighting the challenge of representatively sampling plastic concentrations in river sediments. Our insights are part of an ongoing suite of efforts contributing to the establishment of a new branch of process sedimentology: plastic - riverbed sand interactions.

Heavy rains control the floating macroplastic inputs into the sea from coastal Mediterranean rivers: A case study on the Têt River (NW Mediterranean Sea)

This study focuses on the relevance of small watersheds in the macroplastic pollution of coastal environments. It aims to identify and quantify in terms of composition, number and mass, current riverine flows of floating macroplastics (>2.5 cm). Estimates are based on 66 visual monitoring of total litter over a 4-year-period (2016-2019) in a small coastal Mediterranean river, the Têt River (NW Mediterranean Sea). The plastic fraction represented 97 % of the observed litter, mainly cigarette butts (20.5 %), polystyrene fragments (18.8 %) and light packaging (16.3 %). The Tet River is characterized by frequent flash-flood events caused by heavy rain, that can induce a sudden rise of the water discharge. Such hydroclimatic forcing greatly influence macroplastic flows, both in terms of their average compositions and loads. We have estimated that 354,000 macroplastic items, corresponding to 0.65 tons, are discharged annually from the Tet River into the sea, and that 73 % of them are released during rain events (∼6 % of the year). The short observation distance from the water surface allowed to exhibit the great abundance of small litter (80 % of them were < 10 cm) and to evaluate to 1.8 g the average mass of floating plastics. Our results suggest that remediation actions must be taken on rainy days and target small litter in order to significantly limit macroplastic inputs from rivers to the sea. Moreover, the large share of cigarette butts in macrolitter inputs demonstrates that reducing ocean pollution cannot be achieved solely by improving waste management, but that changes in social behavior are also needed to stem waste production at the source.

Life on bottles: Colonisation of macroplastics by freshwater biota

While rivers are known to be the main vectors of plastics to the sea, it seems surprising that studies on interactions (e.g. colonisation/entrapment and drift) between macroplastics and biota continue to remain largely neglected, notwithstanding they represent unexpected threats to freshwater biota and riverine habitats. To fill these gaps, here we focused on the colonisation of plastic bottles by freshwater biota. To do so, we collected 100 plastic bottles from the River Tiber in summer 2021. Overall, 95 bottles were colonised externally and 23 internally. Specifically, biota mainly occurred within and outside the bottles rather than plastic pieces and organic debris. Moreover, while bottles were externally covered mainly by vegetal organisms (i.e. macrophytes), they internally entrapped more animal organisms (i.e. invertebrates). The taxa most occurring within and outside the bottles belonged to pool and low water quality-associated taxa (e.g. Lemna sp., Gastropoda, and Diptera). In addition to biota and organic debris, plastic particles also occurred on bottles reporting the first observation of 'metaplastics' (i.e. plastics encrusted on bottles). Furthermore, we observed a significant positive correlation between the colonising taxa abundance and the bottle degree degradation. In this regard, we discussed how bottle buoyancy may change due to the organic matter on the bottle, affecting bottle sinking and transport along rivers. Our findings might be crucial for understanding the underrepresented topic of riverine plastics and their colonisation by biota, given that these plastics may act as vectors and cause biogeographical, environmental, and conservation issues to freshwater habitats.

The unknown fate of macroplastic in mountain rivers

Mountain rivers are typically seen as relatively pristine ecosystems, supporting numerous goods (e.g., water resources) for human populations living not only in the mountain regions but also downstream from them. However recent evidence suggests that mountain river valleys in populated areas can be substantially polluted by macroplastic (plastic item >25 mm). It is unknown how distinct characteristics of mountain rivers modulate macroplastic routes through them, which makes planning effective mitigation strategies difficult. To stimulate future works on this gap, we present a conceptual model of macroplastic transport pathways through mountain river. Based on this model, we formulate four hypotheses on macroplastic input, transport and mechanical degradation in mountain rivers. Then, we propose designs of field experiments that allow each hypothesis to be tested. We hypothesize that some natural characteristics of mountain river catchments can accelerate the input of improperly disposed macroplastic waste from the slope to the river. Further, we hypothesize that specific hydromorphological characteristics of mountain rivers (e.g., high flow velocity) accelerate the downstream transport rate of macroplastic and together with the presence of shallow water and coarse bed sediments it can accelerate mechanical degradation of macroplastic in river channels, accelerating secondary microplastic production. The above suggests that mountain rivers in populated areas can act as microplastic factories, which are able to produce more microplastic from the same amount of macroplastic waste inputted into them (in comparison to lowland rivers that have a different hydromorphology). The produced risks can not only affect mountain rivers but can also be transported downstream. The challenge for the future is how to manage the hypothesized risks, especially in mountain areas particularly exposed to plastic pollution due to waste management deficiencies, high tourism pressure, poor ecological awareness of the population and lack of uniform regional and global regulations for the problem.

Aquatic plants entrap different size of plastics in indoor flume experiments

Plastics accumulate in the environment affecting biota and ecosystems. Although rivers are vectors of land-based plastics to the sea, macroplastics and microplastics in rivers are recently studied. Most studies focused on floating plastic transport to the sea through rivers considering only abiotic hydromorphological factors. In this view, among biotic factors, vegetation has recently been found to entrap plastics. Indeed, the role of vegetation is pivotal in affecting riverine plastic transport. While marine vegetation blocking plastics has been studied, research in freshwater ecosystems is neglected. Since hydrological factors have a pivotal role in riverine plastic transport and few is known on plant entrapment, the interaction between hydrological variables and plastic entrapment by vegetation has not yet been investigated. Given that the composition, transport, and fate of "submerged" plastics in the water column are neglected, we aimed at investigating the behaviour of plants in entrapping plastics within a specific laboratory flume tank. Specifically, we assessed whether (i) aquatic plants block different plastic sizes within the water column and (ii) different factors (e.g. water level, density of plants) affect plastic entrapment. Our results showed that, according to plant density, the higher the plant density the higher the entrapment of plastics by plants - independently of plastic size. Considering the water level, macro-, meso-, and microplastics were trapped similarly. Moreover, Potamogeton crispus blocked fewer microplastics compared with Myriophyllum spicatum. Our results might have impact as plants acted as temporary plastic trappers and can be used as tools for mitigating plastic pollution. Future research might investigate if this laboratory approach can be applied in field for recollecting plastics and consequently mitigating the problem. In conclusion, good management of plants in watercourses, canals, and rivers should be ideal for enhancing river functionality and ecosystem services for human well-being (i.e. the plastic entrapment service by plants).

From city to sea: Spatiotemporal dynamics of floating macrolitter in the Tiber River

Rivers are undoubtedly the main pathway of waste dispersed in the environment that from land reaches oceans and seas increasing the amount of marine litter. Major cities are a great source of riverine litter as large urbanization can originate pressure on the integrated waste management resulting in litter entering the rivers. Within this study, we aim to investigate the dynamic of floating riverine macrolitter (items >2.5 cm) in the city of Rome before it reaches the sea by assessing the composition, amount, and seasonal trends of litter transported from the urban centre to the main river mouth of Tiber River. Visual surveys for a whole year (March 2021-February 2022) were conducted from two bridges, Scienza Bridge (in the city) and Scafa Bridge (at the main river mouth) and followed JRC/RIMMEL protocol for riverine litter monitoring. Overall, similar litter composition was observed from the city centre to the mouth with a prevalence of plastic material, mainly related to fragmentation process (i.e. plastic pieces) and single use items, mainly in food and beverage sectors. An extrapolated annual loading of 4 × 10⁵ items/year was estimated at the main mouth of Tiber River. The litter flux seems to be influenced by the seasonal variability and hydrometeorological parameters. The frequency of size classes decreases with increasing size in both sites, and more than half of the recorded items were below 10 cm. Specific categories belonging to "other plastics" have been reported related to anti-Covid-19 behaviour such as face masks and beverage sector, e.g. bottle lids and rings. The main colour of plastics was white, suggesting weathering process of floating riverine litter. This study contributes to increasing knowledge of the origin, composition and spatiotemporal dynamics of riverine floating litter from the city and entering the sea.

Prevalence and risk assessment of microplastics in the Nile Delta estuaries: "The Plastic Nile" revisited

Recent research is directed toward studying plastic pollution in rivers, and estuaries due to the importance of freshwater bodies in all aspects of life. The river deltas and estuaries are interesting for studying the flux of plastics into the oceans. The Nile River has been identified as a hot spot of plastic litter flux in the eastern Mediterranean basin. In addition, it was nicknamed "Plastic Nile", yet this major river is largely unexplored with a lack of field measurements and adequate surveys. The current study was based on bridging this scientific gap. Three trips were conducted, covering 30 km in the Rosetta branch and 23 km in the Damietta branch, during the high water level in summer 2021, and 10 km off the inlet of Lake Burullus, in spring 2021. Microplastics in surface water ranged from 761 ± 319 to 1718 ± 1008 MPs/m³, and from 167 ± 137 to 1630 ± 1303 MPs/kg of dry sediments. Land use/ land cover mapping using Sentinel-2 images showed several sources of pollution that contribute to plastic contamination in the study area. Thermal analysis indicated seven plastic polymers; including, PE, PP, PET, PEVA, and PTFE, using discarded plastic products as reference materials. Microplastics were composed of colored and glossy fragments of sizes <500 μm, originating from land-based sources. Pollution load, polymer risk assessment, and ecological risk indices were calculated. Based on field observations macro-plastics were retained within the extensive network of infrastructure and dam systems. 80-106 billion MPs/year were estimated to flux from the Nile estuaries into the Mediterranean Sea. The current situation urges the development of binding plans to reduce plastic waste in the Nile Delta, as well as setting environmental monitoring points along the Deltaic coast.

How far are we from robust estimates of plastic litter leakage to the environment?

Litter pollution is a global concern, and identifying sources and pathways is crucial for proposing preventative actions. Existing models of plastic litter leakage to the environment have provided worldwide estimates at a country-based level, but only a few initiatives address subnational scales. Adding relevant parameters and improving models is needed to reduce the limitations of global estimates. However, availability of information, which varies among countries and is critical in the Global South, may preclude such improvements. To understand the potentialities and limitations of subnational estimates of plastic litter leakage to the environment, we reviewed the parameters used in the literature and addressed data usability, considering Brazil as a case study. We gathered data on parameters identified for all 5570 Brazilian municipalities and evaluated their usability considering reliability and temporal and geographic granularity. We identified 51 parameters that are either currently used in models or could improve estimates, including parameters regarding territory, population density, socioeconomic condition, and solid waste generation, composition, collection, and final destination, selective waste collection, recycling, and hydrology. Only 29.4% of parameters were linked to data sources with good or very good usability, while most of them presented average usability (45.1%) and 7.8% were not linked to any data source. This panorama of low data usability reveals uncertainties and explicit difficulties of estimating plastic litter leakage to the environment, including mobilization from the terrestrial environment to the ocean. The Brazilian scenario reflects current data availability conditions and the difficulties of countries in the Global South to robustly understand plastic litter leakage and face land-based sources of marine litter.

Caddisfly Larvae are a Driver of Plastic Litter Breakdown and Microplastic Formation in Freshwater Environments

Plastic litter is now pervasive in the aquatic environment. Several marine and terrestrial organisms can fragment plastic with their feeding appendages, facilitating its breakdown and generating microplastics. However, similar studies with freshwater organisms are extremely limited. We explored the interactions between the caddisfly larvae Agrypnia sp. and polylactic acid (PLA) film. The use of plastic by larvae to build their protective cases was investigated, along with their ability to fragment the plastic film as they do with leaf litter. Caddisfly consistently incorporated PLA into their cases alongside leaf material. They also used their feeding appendages to rapidly fragment PLA-forming hundreds of submillimeter-sized microplastics. Although larvae showed a preference for leaf material when constructing cases, plastic use and fragmentation still occurred when leaf material was replete, indicating that this behavior is likely to occur in natural environments that are polluted with plastics. This is thought to be the first documented evidence of active plastic modification by a freshwater invertebrate and therefore reveals a previously unidentified mechanism of plastic fragmentation and microplastic formation in freshwater. Further work is now needed to determine the extent of this behavior across freshwater taxa and the potential implications for the wider ecosystem. Environ Toxicol Chem 2022;41:3058-3069. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Anthropocene microplastic stratigraphy of Xiamen Bay, China: A history of plastic production and waste management

Microplastics (MPs) are considered one of the significant stratigraphic markers of the onset of the Anthropocene Epoch; however, the interconnections between historic plastic production, waste management as well as social-economic and timing of MP accumulation are not well understood. Here, stratigraphic data of MPs from a sediment core from Xiamen Bay, China, was used to reconstruct the history of plastic pollution. Generalized Additive Modeling indicates a complex temporal evolution of MP accumulation. The oldest MPs deposited in 1952 was 30,332 ± 31,457 items/kg•dw, coincide with the infancy of the plastic industry and onset of the Anthropocene. The Cultural Revolution (1966-1976) curtailed these initial increases. Subsequent rapid growth in MPs during the late 1970s was peaked at 189,241 ± 29,495 items/kg•dw in 1988 and was followed by a drastic decline in the late 1980s to a low value in 1996 (16,626 ± 26,371 items/kg•dw), coinciding with proliferation of MP sources, coupled with evolution of plastic production, consumption, and regulation. Increasing MPs over the past decades implies that previous mitigation measures have been compromised by the escalated influx of MPs from increasing plastics production, legacy MPs remaining in circulation and insufficient waste management for a growing population. The present methodology and results represent a conceptual advance in understanding how changes in policy and economics over time correlate to changes in MP records in Anthropocene strata, which may help make decisions on plastic pollution mitigation strategies worldwide.

First insight into the macroplastic storage in a mountain river: The role of in-river vegetation cover, wood jams and channel morphology

Macroplastic storage in mountain rivers remains unexplored and it is unknown how river morphology and different surface types of river areas modulate this process. Therefore, we sampled macroplastic debris stored on the surface of emergent river areas with different vegetation cover and on wood jams in a channelized, single-thread reach and an unmanaged, multi-thread reach of the Dunajec River in the Polish Carpathians. Total amounts of macroplastic debris retained in these reaches were then estimated on the basis of mean mass of macroplastic deposited on unit area of each surface type and the area of this surface type in a given reach. Exposed river sediments and areas covered with herbaceous vegetation stored significantly lower amounts of macroplastic debris (0.6 and 0.9 g per 1 m² on average) than wooded islands and wood jams (respectively 6 g and 113 g per 1 m²). The amounts of macroplastic debris stored on wood jams exceeded 19, 129 and 180 times those found on wooded islands, areas covered with herbaceous vegetation and exposed river sediments. Wooded islands and wood jams covering 16.7% and 1.5% of the multi-thread reach stored 43.8% and 41.1%, respectively, of the total amount of macroplastic stored in that reach, whereas these surface types were practically absent in the channelized reach. Consequently, the unmanaged, multi-thread reach, 2.4 times wider than the neighbouring channelized reach, stored 36 times greater amount of macroplastic per 1 km of river length. Our study demonstrated that the storage of macroplastic debris in a mountain river is controlled by channel management style and resultant river morphology, which modulate river hydrodynamics and a longitudinal pattern of the zones of transport and retention of macroplastic conveyed by river flow.

Macroplastic transfer dynamics in the Loire estuary: Similarities and specificities with macrotidal estuaries

The quantification of macroplastic fluxes transferred by rivers toward the pelagic environment requires a better understanding of macrodebris transfer processes in estuarine environments. Following the strategy adopted in the Seine estuary, this study aims to characterize macroplastic trajectories in the Loire estuary. Between January 2020 and July 2021, 35 trajectories were monitored using plastic bottles equipped with GPS-trackers. With total travelled distances between 100 m and 103.6 km, trajectories show great spatiotemporal variability. The various forcing factors (macroplastic buoyancy, estuaries tidal and hydrometeorological conditions, geomorphology and vegetation) lead to chaotic trajectories, preventing accurate predictions in macroplastic transfer and storage/remobilization dynamics. In the Loire estuary like in the Seine one, no tracked bottle reached the Atlantic Ocean. It confirms that macrotidal estuaries under temperate climates constitute accumulation zones and slow pathways for macroplastics, but raises question on the real fluxes transferred from continental areas to oceans.

Temporal changes of plastic litter and associated encrusting biota: Evidence from Central Italy (Mediterranean Sea)

We investigated the temporal changes from spring to summer of the stranded litter and the composition of plastic encrusting biota along an Italian beach. Our findings highlight a higher quantity of litter (average value 1510.67 ± 581.27 items) in spring, particularly plastic material with a composition driven by currents, winds and waves transported from rivers to sea. During summer the source was caused by anti-social behaviours (e.g. cigarettes). Regarding the plastic size, the most is macroplastic (85.96 %), followed by mesoplastic (13.74 %) and megaplastic (0.30 %) overall, and no seasonal trend was observed. Concerning the encrusting biota, Mollusca was the most frequent phylum found on plastic beach litter, whereas Porifera the most abundant overall. During spring a greater abundance of individuals was recorded compared to summer. The trend of taxa richness was decreasing from spring to summer. Arthropoda, Porifera and Mollusca phyla were significantly more abundant in spring, while Algae in summer.

Lagrangian Modeling of Marine Microplastics Fate and Transport: The State of the Science

Microplastics pollution has led to irreversible environmental consequences and has triggered global concerns. It has been shown that water resources and marine food consumers are adversely affected by microplastics due to their physico-chemical characteristics. This study attempts to comprehensively review the structure of four well-known Lagrangian particle-tracking models, i.e., Delft3D—Water Quality Particle tracking module (D-WAQ PART), Ichthyoplankton (Ichthyop), Track Marine Plastic Debris (TrackMPD), and Canadian Microplastic Simulation (CaMPSim-3D) in simulating the fate and transport of microplastics. Accordingly, the structure of each model is investigated with respect to addressing the involved physical transport processes (including advection, diffusion, windage, beaching, and washing-off) and transformation processes (particularly biofouling and degradation) that play key roles in microplastics’ behavior in the marine environment. In addition, the effects of the physical properties (mainly size, diameter, and shape) of microplastics on their fate and trajectories are reviewed. The models’ capabilities and shortcomings in the simulation of microplastics are also discussed. The present review sheds light on some aspects of microplastics’ behavior in water that were not properly addressed in particle-tracking models, such as homo- and hetero-aggregation, agglomeration, photodegradation, and chemical and biological degradation as well as additional advection due to wave-induced drift. This study can be regarded as a reliable steppingstone for the future modification of the reviewed models.

Riverine litter in a small urban river in Marseille, France: Plastic load and management challenges

Small urban rivers are thought to be major sources of riverine litter, especially macroplastics, into the ocean. In well-developed countries, waste management infrastructures and recovery systems are sometimes implemented to prevent their emission into the sea meeting environmental and economic goals. The Huveaune River in Marseille, South of France, is a typical case study showing a non-negligible and uncontrolled leakage of riverine litter remains, despite all recovery systems implemented. Giant bar screens are settled over the river to collect riverine litter from the whole water column before water is released into the Sea. In this paper, screened material was characterized during a dry, wet and heavy rainfall period and annual macroplastic mass flows were estimated. The plastic fraction represented 83% by count of the 3147 items sorted and counted. Mass flow of plastic debris ranged between 1.1 and 5.8 mt/yr (equivalent to 2.1-11.4 g/cap/yr), in which 0.4-2.1 mt/yr (equivalent to 0.8-4.1 g/cap/yr) are bypassed to the sea during heavy rainfall periods. Giant bar screens across the Huveaune River prevent 65% of the mass flow to reach the sea annually, but 35% remain uncontrolled. When compared to the Seine River and other European Rivers, macroplastic leakage into the ocean per capita may range between 1 and 10 g/cap/yr. This suggests that end-of-pipe solutions are not enough and further supports urgent regulations of the plastic production on local to global scales to tackle the plastic pollution at its source.

Riparian vegetation as a trap for plastic litter

Plastic pollution represents the most widespread threaten throughout the world and, amongst aquatic habitats, freshwaters and in particular riparian zones seems to be highly disturbed. Since the plastic storage and accumulation on the riparian vegetation have not yet been deeply investigated, here, we focussed on the riparian zone's function in trapping plastic litter. To do so, we assessed the occurrence and density of plastics in different vegetated (arboreal, shrubby, herbaceous, reed, bush) and unvegetated types in 8 central Italian rivers, running in different land use contexts. Our results showed that plastic pieces, bags, bottles and food containers were the most abundant specific categories on the vegetated types, demonstrating the riparian vegetation role in trapping plastic litter. Specifically, the highest plastic density was found on the shrubby type suggesting that a tree shape retains plastics more easily than all other vegetated and unvegetated types. Shape and size classification of plastics are not significantly different between vegetated and unvegetated types. These findings allow to collect important information on how the riparian vegetation can be exploited in management activities for removing plastic litters from both freshwater and sea, being the former considered the main plastic source for the latter. This study highlights a further ecosystem service as mechanical filter provided by the riparian zone, even if further studies ought to be performed to understand the role of vegetation as plastic trap and the possible detrimental effects of plastics on the plant health status.

Analysis of Macro- and Microplastics in Riverine, Riverbanks, and Irrigated Farms in Arusha, Tanzania

Microplastics and macroplastics have been reported in different urban rivers and agricultural soil across the globe. However, the interlink between them has not been previously assessed. The present study evaluated the relationship between macro- and microplastics in the surface water and sediments in riverine, riverbanks, and soils from irrigated farms in Arusha, Tanzania. Detached pieces from macroplastics and suspected particles of microplastics from the samples were analyzed using the total attenuated reflectance-Fourier transform infrared spectroscopy. Statistical analysis showed that the number of microplastics in the sediments was higher than those in the surface water and that in irrigated farms was of four times higher than those found in riverine. Besides, the numbers of microplastics and macroplastics in the irrigation farms were exponentially related, while the macroplastics from the riverbanks had an inverse relationship with the rivers' profile elevation. Macroplastics of polyethylene type dominated in the riverbanks and irrigated farms with an occurrence frequency of 100%, while polystyrene was abundant in all analyzed microplastics samples. In addition, those irrigation farms adjacent to canals had a significant number of microplastics and macroplastics than the distant farms. This study provides new information for the region and others that divert water from an urban river for irrigation.

The role of hydrodynamic fluctuations and wind intensity on the distribution of plastic debris on the sandy beaches of Paraná River, Argentina

Plastic in the environment is considered an emerging pollutant of global concern. In spite of intensive research, many questions remain open, such as the processes that drive the deposition and remobilization of plastic debris on river beaches. The objectives of this study were: i) to analyze the influence of the natural hydrological fluctuations and wind intensity on the distribution of mesoplastic (0.5-2.5 cm) and macroplastic (>2.5 cm) debris in beach sediments of a large river, ii) to describe the type of plastic debris found and iii) to explore potential relations between the number of items and weight of macro- and mesoplastics. Our results suggest that, during lowering water levels, flow removes the plastic debris and transports it further downstream. Conversely, when the beach sediments remain exposed during long periods, the plastic debris accumulates considerably. Nevertheless, the influence of wind intensity on plastic debris transport was comparatively negligible. In other words, in our study the water flow had a greater capacity to remobilize and transport plastic debris than the wind. The most abundant mesoplastic items were foam, hard plastic, film and small fragments of fishing line. The dominant macroplastic items recorded were pieces of fishing line (nylon) and cigarette filters (cellulose acetate), typically discarded by beach users. Other items found in large quantities were soft packaging elements (expanded polystyrene), hard plastic containers (polystyrene, polyethylene terephthalate) and beverage bottles (polyethylene terephthalate), typical items of domestic use in the Paraná River region. Finally, we found that the density of macroplastic items is highly correlated to the density of mesoplastic items, serving as surrogate for further estimations. Our results could help to develop better mitigation strategies in seasonal riverscapes, based on the influence of the hydrological cycle and the characteristics of the most abundant meso- and macroplastics.

Macroplastic accumulation in roadside ditches of New York State's Finger Lakes region (USA) across land uses and the COVID-19 pandemic

Macroplastics are a ubiquitous and growing environmental contaminant with impacts in both marine and terrestrial systems. Marine sampling has dominated research in this field, despite the terrestrial origins of most plastic debris. Due to the high surface water connectivity facilitated by roadside ditches, these landscape features provide a unique sampling location linking terrestrial and surface water systems. We collected and analyzed macroplastic accumulation by number of pieces, mass, and polymer type in roadside ditches across four land uses, before and during the COVID-19 pandemic in the Finger Lakes Region of New York State. Commercial land use plastic accumulation rate was highest, while forested land use accumulation rates were lowest on a piece basis. Pre-COVID-19 piece accumulation rates were significantly higher than COVID-19 piece accumulation rates across all land uses. Mass accumulation rates followed similar patterns observed in piece accumulation, but the patterns were not always statistically significant. Plastic type 4 (i.e. thin plastic films), especially plastic bags and wrappers, was the most frequently collected type of macroplastic by piece across all land uses within the 1-7 Resin Identification Codes. By mass, the data were distributed less consistently across land uses. Cigarette filters, containing the polymer cellulose acetate, were the most frequently found roadside plastic, but are not within the 1-7 classification system. Our results suggest that policies in place limiting plastic bag usage could substantially reduce roadside plastics but other plastics, such as food wrappers and other single use plastic films, which comprised a large proportion of the plastic debris collected, should also be regulated to further decrease macroplastic pollution.

The life of a plastic butter tub in riverine environments

Plastic pollution in the world's ocean is one of the major environmental challenges that affects the society today, due to their persistence at sea, adverse consequences to marine life and being potentially harmful to human health. Rivers are now widely recognized as being the major input source of land-based plastic waste into the seas. Despite their key role in plastic transportation, riverine plastic pollution research is still in its infancy and plastic sources, hot-spots and degradation processes in riverine systems are to date poorly understood. In this contribution, we introduce a novel concept of following the aging of polypropylene based post-consumer goods placed in known trapping and mobility zones of macroplastics on a fluvial point bar, which was determined through repeated field surveys of macroplastic densities on this bar. As a proof-of-concept, we followed the degradation of 5 identical plastic butter tubs in 5 different locations on a riverbank and significant differences in the aging of the tubs were observed. The degree of aging of the tubs can to some extent be correlated to their proximity to the main river channel, exposure to natural conditions, such as solar radiation, and its storage time on land.

Effect of Physical Characteristics and Hydrodynamic Conditions on Transport and Deposition of Microplastics in Riverine Ecosystem

Microplastic disposal into riverine ecosystems is an emergent ecological hazard that mainly originated from land-based sources. This paper presents a comprehensive review on physical processes involved in microplastics transport in riverine ecosystems. Microplastic transport is governed by physical characteristics (e.g., plastic particle density, shape, and size) and hydrodynamics (e.g., laminar and turbulent flow conditions). High-density microplastics are likely to prevail near riverbeds, whereas low-density particles float over river surfaces. Microplastic transport occurs either due to gravity-driven (vertical transport) or settling (horizontal transport) in river ecosystems. Microplastics are subjected to various natural phenomena such as suspension, deposition, detachment, resuspension, and translocation during transport processes. Limited information is available on settling and rising velocities for various polymeric plastic particles. Therefore, this paper highlights how appropriately empirical transport models explain vertical and horizontal distribution of microplastic in riverine ecosystems. Microplastics interact, and thus feedback loops within the environment govern their fate, particularly as these ecosystems are under increasing biodiversity loss and climate change threat. This review provides outlines for fate and transport of microplastics in riverine ecosystems, which will help scientists, policymakers, and stakeholders in better monitoring and mitigating microplastics pollution.

Dispersal and transport of microplastics in river sediments

Rivers are viewed as major pathways of microplastic transport from terrestrial areas to marine ecosystems. However, there is paucity of knowledge on the dispersal pattern and transport of microplastics in river sediments. In this study, a three dimensional hydrodynamic and particle transport modelling framework was created to investigate the dispersal and transport processes of microplastic particles commonly present in the environment, namely, polyethylene (PE), polypropylene (PP), polyamide (PA), and polyethylene terephthalate (PET) in river sediments. The study outcomes confirmed that sedimental microplastics with lower density would have higher mobility. PE and PP are likely to be transported for a relatively longer distance, while PA and PET would likely accumulate close to source points. High water flow would transport more microplastics from source points, and high flow velocity in bottom water layer are suggested to facilitate the transport of sedimental microplastics. Considering the limited dispersal and transport, the study outcomes indicated that river sediments would act as a sink for microplastic pollutants instead of being a transport pathway. The patchiness associated with the hotspots of different plastic types is expected to provide valuable information for microplastic source tracking.

Disentangling Variability in Riverbank Macrolitter Observations

Anthropogenic macrolitter (>0.5 cm) in rivers is of increasing concern. It has been found to have an adverse effect on riverine ecosystem health, and the livelihoods of the communities depending on and living next to these ecosystems. Yet, little is known on how macrolitter reaches and propagates through these ecosystems. A better understanding of macrolitter transport dynamics is key in developing effective reduction, preventive, and cleanup measures. In this study, we analyzed a novel dataset of citizen science riverbank macrolitter observations in the Dutch Rhine-Meuse delta, spanning two years of observations on over 200 unique locations, with the litter categorized into 111 item categories according to the river-OSPAR protocol. With the use of regression models, we analyzed how much of the variation in the observations can be explained by hydrometeorology, observer bias, and location, and how much can instead be explained by temporal trends and seasonality. The results show that observation bias is very low, with only a few exceptions, in contrast with the total variance in the observations. Additionally, the models show that precipitation, wind speed, and river flow are all important explanatory variables in litter abundance variability. However, the total number of items that can significantly be explained by the regression models is 19% and only six item categories display an R2 above 0.4. This suggests that a very substantial part of the variability in macrolitter abundance is a product of chance, caused by unaccounted (and often fundamentally unknowable) stochastic processes, rather than being driven by the deterministic processes studied in our analyses. The implications of these findings are that for modeling macrolitter movement through rivers effectively, a probabilistic approach and a strong uncertainty analysis are fundamental. In turn, point observations of macrolitter need to be planned to capture short-term variability.

Macroplastics in rivers: present knowledge, issues and challenges

Macroplastics are the primary contributor to riverine plastic pollution by mass, posing a wide range of serious threats for riverine systems, from adversely affecting various life forms within the riverine system, to potentially increasing flood risk, and generally resulting in adverse effects on any livelihoods. Compared to other river-related research disciplines, research into riverine macroplastics and their effects has not yet featured prominently. Various quantification methods are presently used to assess the presence of macroplastics at different locations within river systems; however, overcoming limitations and unifying methods remain an essential need. Macroplastic dynamics in rivers are subject to various factors, including both material and river characteristics. We review the diverse factors that potentially influence macroplastic dynamics in rivers, and highlight our knowledge limits. We advocate for future research that enables synergies between improved field quantification techniques, use of global protocols and data sharing, and laboratory experiments. This is needed to obtain a riverine macroplastic budget model, required for the implementation of targeted management practices. Finally, a multilayer potential management strategy is presented: (i) reducing the macroplastic supply into rivers; (ii) removing effectively and safely macroplastics from within rivers; and (iii) treating macroplastics once removed from the riverine system.

Plastics Are an Insignificant Carrier of Riverine Organic Pollutants to the Coastal Oceans

Global rivers act as a dominant transport pathway for land-based plastic debris to the marine environment. Organic pollutants (OPs) affiliated with riverine plastics can also enter the global oceans, but their amounts remain unknown. Microplastic (MP) samples were collected in a one-year sampling event from the surface water of the eight main riverine outlets in the Pearl River Delta (PRD), China, and analyzed for OPs affiliated with MPs, including 16 polycyclic aromatic hydrocarbons (PAHs), eight polybrominated diphenyl ethers (PBDEs), and 14 polychlorinated biphenyls (PCBs). The mean concentrations of MP-affiliated ∑₁₆PAH, ∑₈PBDE, and ∑₁₄PCB were 2010 (range: 25-40,100), 412 (range: 0.84-14,800), and 67.7 (range: 1.86-456) ng g^-1, respectively. Based on these and previous results, the annual riverine outflows of MP-affiliated OPs were 148, 83, and 8.03 g for ∑₁₆PAH, ∑₈PBDE, and ∑₁₄PCB, respectively. Assuming that plastic debris of different sizes contained the same concentrations of the target pollutants as MPs, the mean riverine outflows of plastic-bound ∑₁₆PAH, ∑₈PBDE, and ∑₁₄PCB were 6.75, 3.77, and 0.37 kg year^-1, respectively, which were insignificant compared with the riverine outflows of OPs through riverine water discharge (up to hundred tons per year). Apparently, plastics are an insignificant carrier of riverine OPs to the coastal oceans.

The Way of Macroplastic through the Environment

With the focus on microplastic in current research, macroplastic is often not further considered. Thus, this review paper is the first to analyse the entry paths, accumulation zones, and sinks of macroplastic in the aquatic, terrestrial, and atmospheric environment by presenting transport paths and concentrations in the environment as well as related risks. This is done by applying the Source–Pathway–Receptor model on macroplastic in the environment. Based on this model, the life cycle of macroplastic is structurally described, and knowledge gaps are identified. Hence, current research aspects on macroplastic as well as a sound delimitation between macro- and microplastic that can be applied to future research are indicated. The results can be used as basic information for further research and show a qualitative assessment of the impact of macroplastic that ends up in the environment and accumulates there. Furthermore, the applied model allows for the first time a quantitative and structured approach to macroplastic in the environment.