Blue Electrophosphorescence from Iridium(III) Phosphors Bearing Asymmetric Di-N-aryl 6-(trifluoromethyl)-2H-imidazo[4,5-b]pyridin-2-ylidene Chelates

Efficient blue phosphors remain a formidable challenge for organic light-emitting diodes (OLEDs). To circumvent this obstacle, a series of Ir(III)-based carbene complexes bearing asymmetric di-N-aryl 6-(trifluoromethyl)-2H-imidazo[4,5-b]pyridin-2-ylidene chelates, namely, f-ct6a‒c, are synthesized, and their structures and photophysical properties are comprehensively investigated. Moreover, these emitters can undergo interconversion in refluxing 1,2,4-trichlorobenzene, catalyzed by a mixture of sodium acetate (NaOAc) and p-toluenesulfonic acid monohydrate (TsOH·H2O) without decomposition. All Ir(III) complexes present good photoluminescence quantum yield (ΦPL = 83-88%) with peak maximum (max.) at 443-452 nm and narrowed full width at half maximum (FWHM = 66-73 nm). Among all the fabricated OLED devices, f-ct6b delivers a max. external quantum efficiency (EQE) of 23.4% and Commission Internationale de L'Eclairage CIEx , y coordinates of (0.14, 0.12), whereas the hyper-OLED device based on f-ct6a and 5H,9H,11H,15H-[1,4] benzazaborino [2,3,4-kl][1,4]benzazaborino[4',3',2':4,5][1,4]benzazaborino[3,2-b]phenazaborine-7,13-diamine, N7,N7,N13,N13,5,9,11,15-octaphenyl (ν-DABNA) exhibits max. EQE of 26.2% and CIEx , y of (0.12, 0.13). Finally, the corresponding tandem OLED with f-ct6b as dopant gives a max. luminance of over 10 000 cd m-2 and max. EQE of 42.1%, confirming their candidacies for making true-blue OLEDs.

Effects of Deuterium Isotopes on Pt(II) Complexes and Their Impact on Organic NIR Emitters

Insight into effect of deuterium isotopes on organic near-IR (NIR) emitters was explored by the use of self-assembled Pt(II) complexes H-3-f and HPh-3-f, and their deuterated analogues D-3-f and DPh-3-f, respectively (Scheme 2). In vacuum deposited thin film, albeit having nearly identical emission spectral feature maximized at ~810 nm, H-3-f and D-3-f exhibit remarkable difference in photoluminescence quantum yield (PLQY) of 29 % and 50 %, respectively. Distinction in PLQY is also observed for HPh-3-f (800 nm, 50 %) and DPh-3-f (798 nm, 67 %). We then elucidated the theoretical differences in the impact on near-infrared (NIR) luminescence between Pt(II) complexes and organic small molecules upon deuteration. The results establish a general guideline for the deuteration on NIR emission efficiency. From a perspective of practical application, NIR OLEDs based on D-3-f and DPh-3-f emitters attain EQEmax of 15.5 % (radiance 31,287 mW Sr-1  m-2 ) and 16.6 % (radiance of 32,279 mW Sr-1  m-2 ) at 764 nm and 796 nm, respectively, both of which set new records for NIR OLEDs of >750 nm.

[Characteristics and clinical analysis of MLH1 c.463dupC gene mutation in a Lynch syndrome family]

In this study, a case of Lynch syndrome (LS) family line with a novel mutation site in the MLH1 c.463dupC gene was reported and the clinical and pathogenic genetic features of this family were analyzed. A 40-year-old female patient with colon cancer diagnosed at the First Affiliated Hospital of Kunming Medical University on October 2, 2020 was retrospectively included. The clinical data of the family were collected and the family lineage was drawn. The family tumor history met the Amsterdam Criteria Ⅱ and the diagnostic criteria of LS in Chinese, which was a typical LS family lineage. A germline code-shift missense mutation c.463dupC in the MLH1 gene located in exon 6, a possible pathogenic variant, was detected by second-generation sequencing (NGS) in the patient. Subsequently, Sanger sequencing was performed on a total of 20 direct lineage members of the family of the MLH1 gene, 7 cases were found to harbor the mutation and included in the LS high-risk control. Follow-up to October 2023 showed that the patient had endometrial and cervical polyps, one case had colorectal cancer, and two cases had intestinal polyps, all were treated with early intervention and therapy; two cases did not show any clinical symptoms. This study is the first to report a new mutation site for the potentially pathogenic MLH1 c.463dupC, providing a rationale for the pathogenicity of the mutation and standardized health management for familial carriers.

Bis-tridentate Ir(III) Phosphors and Blue Hyperphosphorescence with Suppressed Efficiency Roll-Off at High Brightness

Narrowband blue emitters are indispensable in achieving ultrahigh-definition OLED displays that satisfy the stringent BT 2020 standard. Hereby, a series of bis-tridentate Ir(III) complexes bearing electron-deficient imidazo[4,5-b]pyridin-2-ylidene carbene coordination fragments and 2,6-diaryloxy pyridine ancillary groups were designed and synthesized. They exhibited deep blue emission with quantum yields of up to 89% and a radiative lifetime of 0.71 μs in the DPEPO host matrix, indicating both the high efficiency and excellent energy transfer process from the host to dopant. The OLED based on Irtb1 showed an emission at 468 nm with a maximum external quantum efficiency (EQE) of 22.7%. Moreover, the hyper-OLED with Irtb1 as a sensitizer for transferring energy to terminal emitter v-DABNA exhibited a narrowband blue emission at 472 nm and full width at half-maximum (FWHM) of 24 nm, a maximum EQE of 23.5%, and EQEs of 19.7, 16.1, and 12.9% at a practical brightness of 100, 1000, and 5000 cd/m2, respectively.

Thickness-variation-insensitive near-infrared quantum dot LEDs

In terms of tunable luminescence and high quantum efficiency, colloidal quantum dots (CQDs) are promising semiconductors for constructing near-infrared light-emitting diodes (NIR-LEDs). However, currently available NIR-LEDs are susceptible to variations in the emission layer thickness (EMLT), the highest external quantum efficiency (EQE) decreases to below 50% (relative to peak EQE) when the EMLT varies out of a narrow range of (±30 nm). This is due to the thickness-dependent carrier recombination rate and current density variation, resulting in batch-to-batch EQE fluctuations that limit LED reproducibility. Here we report efficient NIR-LEDs that exhibit EQE variations of less than 15% (relative to the champion EQE) over an EMLT range of 40-220 nm; the highest achievable EQE of ∼11.5% was obtained by encapsulating a 212 nm-thick CQD within a type-I inorganic shell to enhance the radiative recombination in the dots, resulting in a high photoluminescence quantum yield of 80%, and by post-treating the films with a bifunctional linking agent to improve and balance the hole and electron mobilities in the entire film (electron mobility: 8.23 × 10-3 cm2 V-1 s-1; hole mobility: 7.0 × 10-3 cm2 V-1 s-1). This work presents the first NIR-LEDs that exhibit EMLT-invariant EQE over an EMLT range of 40-220 nm, which represents the highest EQE among reported CQD NIR-LEDs with a QD thickness exceeding 100 nm.

Electroluminescence and hyperphosphorescence from stable blue Ir(III) carbene complexes with suppressed efficiency roll-off

Efficient Förster energy transfer from a phosphorescent sensitizer to a thermally activated delayed fluorescent terminal emitter constitutes a potential solution for achieving superb blue emissive organic light-emitting diodes, which are urgently needed for high-performance displays. Herein, we report the design of four Ir(III) metal complexes, f-ct1a ‒ d, that exhibit efficient true-blue emissions and fast radiative decay lifetimes. More importantly, they also undergo facile isomerization in the presence of catalysts (sodium acetate and p-toluenesulfonic acid) at elevated temperature and, hence, allow for the mass production of either emitter without decomposition. In this work, the resulting hyper-OLED exhibits a true-blue color (Commission Internationale de I'Eclairage coordinate CIEy = 0.11), a full width at half maximum of 18 nm, a maximum external quantum efficiency of 35.5% and a high external quantum efficiency 20.3% at 5000 cd m‒2, paving the way for innovative blue OLED technology.

Introducing Spiro-locks into the Nitrogen/Carbonyl System towards Efficient Narrowband Deep-blue Multi-resonance TADF Emitters

The current availability of multi-resonance thermally activated delayed fluorescence (MR-TADF) materials with excellent color purity and high device efficiency in the deep-blue region is appealing. To address this issue in the emerged nitrogen/carbonyl MR-TADF system, we propose a spiro-lock strategy. By incorporating spiro functionalization into a concise molecular skeleton, a series of emitters (SFQ, SOQ, SSQ, and SSeQ) can enhance molecular rigidity, blue-shift the emission peak, narrow the emission band, increase the photoluminescence quantum yield by over 92 %, and suppress intermolecular interactions in the film state. The referent CZQ without spiro structure has a more planar skeleton, and its bluer emission in the solution state redshifts over 40 nm with serious spectrum broadening and a low PLQY in the film state. As a result, SSQ achieves an external quantum efficiency of 25.5 % with a peak at 456 nm and a small full width at half maximum of 31 nm in a simple unsensitized device, significantly outperforming CZQ. This work discloses the importance of spiro-junction in modulating deep-blue MR-TADF emitters.

Design and Synthesis of Red Through-Space Charge Transfer Thermally Activated Delayed Fluorescence Emitters with Donor/Acceptor/Donor Stacking

Red through-space charge transfer thermally activated delayed fluorescence (TSCT TADF) materials named SAF36DCPP and SAF27DCPP with sandwiched structures were synthesized. Single crystals indicated that the intramolecular C-H···π interactions play a vital role in rigidifying the sandwiched structure, which results in a fluorescence yield of 63% for SAF36DCPP compared to 40% for SAF27DCPP. Organic light-emitting diodes with SAF36DCPP as the emitter realized a maximum external quantum efficiency of 16.12%.

Recent Progresses in Solution-Processed Tandem Organic and Quantum Dots Light-Emitting Diodes

Solution processes have promising advantages of low manufacturing cost and large-scale production, potentially applied for the fabrication of organic and quantum dot light-emitting diodes (OLEDs and QLEDs). To meet the expected lifespan of OLEDs/QLEDs in practical display and lighting applications, tandem architecture by connecting multiple light-emitting units (LEUs) through a feasible intermediate connection layer (ICL) is preferred. However, the combination of tandem architecture with solution processes is still limited by the choices of obtainable ICLs due to the unsettled challenges, such as orthogonal solubility, surface wettability, interfacial corrosion, and charge injection. This review focuses on the recent progresses of solution-processed tandem OLEDs and tandem QLEDs, covers the design and fabrication of various ICLs by solution process, and provides suggestions on the future challenges of corresponding materials and devices, which are anticipated to stimulate the exploitation of the emerging light technologies.

Managing Defects Density and Interfacial Strain via Underlayer Engineering for Inverted CsPbI2 Br Perovskite Solar Cells with All-Layer Dopant-Free

Inorganic perovskite CsPbI₂ Br has advantages of excellent thermal stability and reasonable bandgap, which make it suitable for top layer of tandem solar cells. Nevertheless, solution-processed all-inorganic perovskites generally suffer from high-density defects as well as significant tensile strain near underlayer/perovskite interface, both leading to compromised device efficiency and stability. In this work, the defect density as well as interfacial tensile strain in inverted CsPbI₂ Br perovskite solar cells (PeSCs) is remarkably reduced by using a bilayer underlayer composed of dopant-free 2,2',7,7'-tetrakis(N,N-dip-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD) and copper phthalocyanine 3,4',4″,4'″-tetrasulfonated acid tetrasodium salt (TS-CuPc) nanoparticles. As compared to control devices with pristine Spiro-OMeTAD, devices based on Spiro-OMeTAD/TS-CuPc exhibit remarkably improved photovoltaic performance and enhanced thermal/humidity stability due to the better perovskite crystallization, improved interfacial passivation, and hole-collection as well as efficient interfacial strain release. As a result, a champion efficiency of 14.85% can be achieved, which is approaching to the best reported for dopant-free and inverted all-inorganic PeSCs. The work thus provides an efficient strategy to simultaneously regulate the defects density and strain issue related to inorganic perovskites.

[Clinical effect of free thoracodorsal artery perforator flap in reconstructing large scar on the facial subunit]

Objective: To explore the clinical effect of free transplantation of thoracodorsal artery perforator flap in reconstructing large scar on the facial subunit. Methods: From April 2014 to March 2018, 7 patients with large facial scar were admitted to Ningbo NO.6 Hospital, including 3 males and 4 females, aged from 31 to 49 years, 4 with frontal involvement and 3 with chin and neck. Color Doppler ultrasound was used for the positioning of the thoracodorsal artery perforating vessel, and scar resection was performed according to the principle of facial subunit repair. The wound area was 8 cm×6 cm-21 cm×8 cm, and the wound was repaired with the free thoracodorsal artery perforator flap in the area of 9 cm×7 cm-22 cm×9 cm. The donor site was closed directly by suturing. The consistency of the location of the perforating vessel explored during the operation with its preoperative positioning and the flap survival were recorded. The color, texture, and appearance of the flap and the healing condition, scar formation, and function of the donor area were observed during follow-up. Results: The locations of the perforating vessels of 7 patients explored during the operation were consistent with those positioned by color Doppler ultrasound before the operation. All the flaps of the 7 cases survived successfully after operation. Postoperative follow-up of 12-18 months showed that the flap color was similar to the surrounding skin of the recipient area, with soft texture and no obvious contracture. Slight bloated appearance was observed in the flaps of 4 cases. All the 7 patients had postoperative healing of the flap donor site without obvious scar hyperplasia or influence on shoulder joint function. Conclusions: The anatomy of the perforating vessel of the thoracodorsal artery perforator flap is relatively constant and the flap can be cut in large area with soft texture, good appearance, and concealed donor area, which is a good choice for reconstructing large scar on the facial subunit.

A Simple Perylene Derivative as a Solution-Processable Cathode Interlayer for Perovskite Solar Cells with Enhanced Efficiency and Stability

A simple alcohol-soluble perylene derivative (i.e., tetramethylammonium salt of perylene-3,4,9,10-tetracarboxylic acid; TMA-PTC) was prepared and applied as a cathode interlayer (CIL) to modify the PC₆₁BM/Ag interface in planar p-i-n perovskite solar cells (PeSCs). As a result, the power conversion efficiency (PCE) of the TMA-PTC-based PeSCs is ca. 30% higher than that of the devices without CIL. It was revealed that the enhancement in PCE might be attributed to the improved electron-transporting and hole-blocking properties of the PC₆₁BM/TMA-PTC/Ag interfaces. Moreover, the TMA-PTC devices show remarkably higher stability than those without CIL probably due to the suppressed corrosion of perovskite on Ag cathode. Our findings thus demonstrate a multifunctional and solution-processable CIL that may be a promising block for the fabrication of low-cost, high-efficiency and stable planar p-i-n PeSCs.

84% efficiency improvement in all-inorganic perovskite light-emitting diodes assisted by a phosphorescent material

A novel mixed perovskite emitter layer is applied to design all-inorganic cesium lead halide perovskite light-emitting diodes (PeLEDs) with high electroluminescence (EL) performance, by combining CsPbBr₃ with iridium(iii)bis[2-(4′,6′-difluorophenyl)pyridinato-N,C²′]-picolinate (FIrpic), where FIrpic is a phosphorescent material with very high internal quantum efficiency (IQE) approaching 100%. The CsPbBr₃:FIrpic PeLEDs show a maximum luminance of 5486 cd m⁻², and an external quantum efficiency of 0.47%, which are 1.84 and 1.76 times that of neat CsPbBr₃ PeLEDs, respectively. It is found that FIrpic molecules as an assistant dopant can efficiently transmit energy from the excitons of FIrpic to the excited state of the CsPbBr₃ emitter via a Förster energy transfer process, leading to enhanced EL efficiency in the CsPbBr₃:FIrpic PeLEDs.

Remarkable EL performance is achieved in CsPbBr₃:FIrpic perovskite light-emitting diodes assisted by a phosphorescent material.

[Clinical and genetic analysis of an infant with isolated 17, 20-lyase deficiency]

OBJECTIVE

To explore the clinical and genetic characteristics of an infant with isolated 17, 20-lyase deficiency.

METHOD

The clinical, biochemical and genetic characteristics were analyzed in an 8-month-old infant with 46, XY gonadal dysgenesis who presented predominantly the female external genitalia.

RESULT

The infant was referred because of"masses in bilateral inguinal region and 46, XY gonadal dysgenesis". He was normotensive. Laboratory tests revealed elevated levels of progesterone and 17-hydroxyprogesterone. The detailed parameters are as follows: progesterone 29.35(reference range 0.09-1.0)nmol/L, 17-hydroxyprogesterone 10.9(reference range 0.6-2.6)nmol/L, testosterone 0.7(reference range 0.1-3.1)nmol/L, dehydroepiandrosterone sulfate <0.15(reference range 0.80-5.6)mg/L, androstenedione <0.3 (reference range 0.6-3.1) μg/L, luteinizing hormone 6.6(reference range 0.6-1.7)U/L, follicle stimulating hormone 1.8 (reference range 0.5-3.7)U/L, estradiol 37.66(reference range 73.4-146.8)pmol/L. The patient had normal levels of serum sodium, potassium, corticosteroid and plasma adrenocorticotropic hormone. Genomic DNA was extracted from the leukocytes of peripheral blood of the patient and subjected to next generation sequencing (NGS) for testing more than 200 sexual development related genes. Sanger sequencing was used to confirm the results of NGS. Genetic analysis revealed that the patient harbored compound heterozygous mutations of c. 1226C>G (p.Pro409Arg, P409R) and c. 707T>G (p.Val236Gly, V236G) in CYP17A1 gene derived from paternal and maternal allele. V236G was a novel mutation predicted to be pathogenic. The infant was diagnosed as isolated 17, 20-lyase deficiency combined with clinical and molecular characteristics of CYP17A1 gene.

CONCLUSION

We have identified the compound heterozygous mutations of P409R and V236G in the CYP17A1 gene in one infant with isolated 17, 20-lyase deficiency. He presented with 46, XY gonadal dysgenesis, normal blood pressure and elevated concentration of progesterone and 17-hydroxyprogesterone.

Screening of highly informative and representative microsatellite markers for genotyping of major cultivated cotton varieties

We screened and assessed published cotton simple sequence repeat (SSR) primers to establish a set of core SSR markers suitable for cotton major cultivars in China and analyzed genetic diversity based on the core marker set. Using a stepwise screening strategy, 12 leading cultivars for preliminary screening and 96 cultivars for rescreening were evaluated. A total of 184 polymorphic SSR markers were initially screened from 3299 candidates, and a core set of 52 SSR markers with wide genome coverage (2 markers per chromosome) was obtained. Among 96 major cultivars, 273 amplification genotypes were generated using the core marker set. Polymorphism information content values ranged from 0.28-0.83, with an average value of 0.56. The core SSR marker set detected on denaturing polyacrylamide gel electrophoresis indicated that the band genotype was either a single or double band on conventional cultivars, while most were double bands (65.4%). Among 56 hybrids, the average heterozygosis rate was 35.8%, ranging from 7.1-55.4%. Eighteen of 96 cultivars had distinct band genotypes. The genetic diversity analyzed using the of NTSYS-pc V2.10 software indicated that the Yangtze River valley cotton region had the highest polymorphic level, followed by Xinjiang and then the Yellow River valley. The genetic basis of conventional cultivars was narrower than that of hybrids. The core marker set can be used for fingerprint construction, variety identification, and purity tests of major cotton cultivars in China.

Construction of a primary DNA fingerprint database for cotton cultivars

Forty core primers were used to construct a DNA fingerprint database of 132 cotton species based on multiplex fluorescence detection technology. A high first successful ratio of 99.04% was demonstrated with tetraplex polymerase chain reaction. Forty primer pairs amplified a total of 262 genotypes among 132 species, with an average of 6.55 per primer and values of polymorphism information content varying from 0.340 to 0.882. Conflicting DNA homozygous ratios were found in various species. The highest DNA homozygous ratio was found in landrace standard cultivars, which had an 81.46% DNA homozygous ratio. The lowest occurred in a group of 2010 leading cultivars with a homozygous ratio of 63.04%. Genetic diversity of the 132 species was briefly analyzed using unweighted pair-group method with arithmetic means.

Enhanced hole injection in phosphorescent organic light-emitting diodes by thermally evaporating a thin indium trichloride layer

An ultrathin layer of indium trichloride (InCl(3)) is thermally evaporated on the indium tin oxide (ITO) anode to enhance the hole injection in simplified phosphorescent organic light-emitting diodes (PHOLEDs). Comparing with the device with ultraviolet (UV)-ozone treatment, the device modified by InCl(3) exhibits a maximum current efficiency of 82.2 cd/A measured at about 2000 cd/cm(2) and 36% improvement in power efficiency measured at 20 mA/cm(2). More importantly, more than three times improvement in half lifetime estimated at an initial luminance of 1000 cd/cm(2) is achieved. The investigations using ultraviolet photoelectron spectroscopy, X-ray photoelectron spectroscopy, and the bias- and temperature-dependent current density-voltage characteristics in the related hole-dominated devices have revealed that the improved device performance is mainly attributed to the enhanced hole injection resulting from the lowered hole injection barrier height in the InCl(3)-modified devices.

White-light emitting microtubes of mixed organic charge-transfer complexes

Self-assembled microtubes of mixed charge-transfer (CT) complexes comprising TCNB and naphthalene can be constructed with pyrene as dopant by an etching-assisted CT-induced interaction. Highly efficient Förster resonance energy transfer (FRET) from the excited naphthalene-TCNB to pyrene-TCNB molecules is obtained in mixed CT complex microtubes. White-light emissive CT complex microtubes can be formed by adjusting the dopant concentration and serve as an active optical waveguide.

Study of hole-injecting properties in efficient, stable, and simplified phosphorescent organic light-emitting diodes by impedance spectroscopy

Simplified phosphorescent organic light-emitting diodes (OLEDs) using only two kinds of hosts and comprising either a neat MoO(x) hole-injecting layer (HIL) or a MoO(x)-doped 4,4'-bis(carbazol-9-yl)biphenyl (CBP) HIL were studied. The devices having the MoO(x)-doped CBP HIL are superior to the device having the neat MoO(x) HIL in terms of power efficiency and operational lifetime. Impedance spectroscopy studies revealed that both the reduced hole-injecting barrier height at the anode/doped HIL interface and the reduced bulk resistivity in the doped CBP HIL contribute to the improvement in electroluminescence characteristics. When increasing the MoO(x) volume percentage from 5 to 10% and then to 20%, the hole-injecting barrier height is decreased from 0.63 eV to 0.36 eV and then to 0.18 eV. The power efficiency of the device with a 20 vol % of MoO(x)-doped CBP HIL is more than two times that of the device with a neat MoO(x) HIL measured at a driven current of 5 mA/cm(2). Moreover, the lifetime of the device with a 20 vol % of MoO(x)-doped CBP HIL is more than three times that of the device with a neat MoO(x) HIL estimated at an initial luminance of 1000 cd/m(2). The MoO(x)-doped HIL further ensures the feasibility of the simplified phosphorescent OLEDs for potential applications.

Construction and selection of the natural immune Fab antibody phage display library from patients with colorectal cancer

AIM: To construct the natural immune Fab antibody phage display libraries of colorectal cancer and to select antibodies related with colorectal cancer.

METHODS: Extract total RNA from tissue of local cancer metastasis lymph nodes of patients with colorectal cancer. RT-PCR was used to amplify the heavy chain Fd and light chain κ and the amplification products were inserted successively into the vector pComb3 to construct the human libraries of Fab antibodies. They were then panned by phage display technology. By means of Dot immunoblotting and ELISA, the libraries were identified and the Fab phage antibodies binding with antigens of colorectal cancer were selected.

RESULTS: The amplified fragments of Fd and κ gained by RT-PCR were about 650 bp. Fd and κ PCR products were subsequently inserted into the vector pComb3, resulting in a recombination rate of 40% and the volume of Fab phage display library reached 1.48 × 10⁶. The libraries were enriched about 120-fold by 3 cycles of adsorption-elution-multiplication (panning). Dot immunoblotting showed Fab expressions on the phage libraries and ELISA showed 5 clones of Fab phage anti bodies which had binding activities with antigens of colorectal cancer.

CONCLUSION: The natural immune Fab antibody phage display libraries of colorectal cancer were constructed. They could be used to select the relative antibodies of colorectal cancer.

Curcumin inhibits cell proliferation by interfering with the cell cycle and inducing apoptosis in colon carcinoma cells

It has been reported that curcumin (diferuloylmethane) could inhibit growth of several types of malignant cells both in vitro and in vivo. However, the mechanism of its action is unknown. In this study, we investigated the inhibitory effects of curcumin on human colon carcinoma cell (Lovo) growth and its mechanism of action in vitro by means of growth assay, colony formation assay, MTT assay, cell cycle and apoptosis analysis. Curcumin inhibited cell growth in a dose-dependent manner. The ability of Lovo cells treated with curcumin to form colonies was depressed. MTT test showed that curcumin was cytotoxic to cells. Lovo cells treated with curcumin were largely accumulated in S, G2/M phase which prevented cells from entering the next cell cycle. Apoptosis induced by curcumin was confirmed by characteristic ladders and cellular morphological changes. Curcumin can inhibit Lovo cells growth and the cellular mechanism responsible for the action is to arrest the cell cycle in S, G2/M phase and to induce apoptotic cell death.

Fluorine intake of a Tibetan population

Measurements of food consumption of randomly selected families and fluorine levels in food and beverages were used to calculate the fluorine intake of Tibetan people living in nomadic or semi-nomadic areas of the region and regularly consuming brick tea both as a beverage and in food. The fluorine intake of these groups (children 5.49-7.62 mg day; adults 10.43-14.48 mg/day) was much higher than that of members of a Han population living in the region (children 1.44 mg/day; adults 2.54 mg/day). The amounts of fluorine consumed by the Tibetan inhabitants are at least twice the WHO suggested limit (2 mg/day). Tea plants are rich in fluorine, and the highest levels are found in older leaves which are used to make brick tea. We conclude that brick tea is the major source of fluorine intake by the Tibetan population studied.

Efficiency of Ginkgo biloba extract (EGb 761) in antioxidant protection against myocardial ischemia and reperfusion injury

The cardio-protective mechanisms of EGb 761, an extract of Ginkgo biloba leaves, on myocardial ischemia-reperfusion injury were investigated using rabbits subjected to 30 minutes of regional cardiac ischemia and 120 min of reperfusion under anesthesia. Compared to the saline perfused group, EGb 761 treatment (10 mg/kg, injected into the coronary artery) significantly inhibited the increase in lipid peroxidation and maintained total and CuZn-SOD levels in both plasma and tissue during and at the end of reperfusion. Both the decrease in tissue type plasminogen activator (t-PA) and the increase in plasminogen activator inhibitor-1 (PAI-1) caused by ischemia-reperfusion were also significantly suppressed by EGb 761 treatment. Furthermore, the ultrastructure of the myocytes of the EGb 761 treated heart was slightly damaged after ischemia-reperfusion, while the control ischemic-reperfused hearts demonstrated severe histological damages such as swelling and vacuolization of the mitochondria. These results suggest that EGb 761 protects hearts by its antioxidant properties and by its ability to adjust fibrinolytic activity.

[A study on the complementary scheme of mass screening for colorectal cancer in an asymptomatic population]

Both SPA immunological fecal occult blood test (SPA FOBT test) and detection of T-antigen in rectal mucus (Shams' test) were used as screening tests in asymptomatic mass screening to evaluate the complementary effect of both tests for detection of colorectal cancers. SPA FOBT test showed a positive rate of 11.1% and shams' test 8.9% among 7,740 subjects. In 498 cases with positive screening test, 11 cases of carcinomas and 88 adenomas were found with colonoscopy. Only 9 cancers and 55 adenomas showed positive result in SPA FOBT test and 8 cancers and 51 adenomas in Shams' test. Both tests combined could enhance the detective rate of cancer in asymptomatic mass screening from 81.8% with SPA FOBT test or 72.7% with Shams' test to 90.9%. This complementary effect was more obvious in adenoma detection. It is suggested that there were some shortcomings in sequential FOBT test for cancer detection, the combined use of the two different screening tests for detection of colorectal cancer could decrease the rate of missed detection.

Comparison of Shams' test for rectal mucus to an immunological test for fecal occult blood in large intestinal carcinoma screening. Analysis of a check-up of 6480 asymptomatic subjects

The sugar moiety detected from rectal mucus by the Galactose oxidase-schiff (Shams' test) is considered a substitutive test for immunological fecal occult blood test (FOBT) in screening colorectal carcinoma. Two strategies of screening were applied in 6480 subjects over 40 years of age, and 130 cm flexible colonoscope used for sigmoidoscopy or pancolonoscopy. Of them, 3820 were taken for immune FOBT (SPA test) and Shams' test. Only those who showed positive tests were chosen for 60 cm flexible sigmoidoscopy, while another 2660 subjects for both sigmoidoscopy and tests at the same time. Additionally, 130 cm flexible pancolonoscopy was carried out in 103 individuals with positive Shams' test for evaluating the false positive rate. Shams' test showed a sensitivity of 85.7% for colorectal cancer, 47.1% for adenomas in preselected patients, while the positive rate of SPA test were 90.5% and 41.2% respectively. In 3820 asymptomatic subjects undergoing sequential screening (aged 45 years and higher), Shams' test showed 9.1% positive, SPA showed 11.2% and 620 (16.2%) subjects were selected for sigmoidoscopy based on their positive galactose oxidase result or positive FOBT result. Two early stage carcinomas and 33 adenomas (0.32% and 4.2% respectively in sigmoidoscopy) were found. Another 2 660 subjects were taken for sigmoidoscopy screening. Four carcinomas and 78 adenomas were found. Of them, only two carcinoma (50%) and 17 (21.8%) or 22 (28.2%) adenomas were positive in Shams' or SPA test. But both tests combined in screening showed a rate of 61.3% in adenomas and 75.0% in cancers. 103 subjects with positive Shams' test were taken for pancolonoscopy. 82.5% showed no lesions.(ABSTRACT TRUNCATED AT 250 WORDS)

Study of molecular markers of resistance to m-AMSA in a human breast cancer cell line. Decrease of topoisomerase II and increase of both topoisomerase I and acidic glutathione S transferase

Resistance to 0.8 microM 4'-(9-acridinylamino)methanesulphon-m-anisidide (m-AMSA) was induced by stepwise increases of drug concentration in the human tumor cell line CALc18 originating from a breast adenocarcinoma. The resistant cell line CALc18/AMSA exhibited a resistance index of 10 and a cross-resistance to other topoisomerase II inhibitors. A 3-fold decrease in the levels of topoisomerase II decatenating activity was found in CALc18/AMSA cells. By contrast, topoisomerase I activity was increased by about 3-fold in resistant cells. Interestingly this line was hypersensitive to camptothecin, a specific inhibitor of topoisomerase I. Restriction endonuclease patterns of the topoisomerase I and topoisomerase II loci were found to be identical in CALc18/AMSA and CALc18 with no evidence of gene amplification and rearrangements. Alkaline elution of m-AMSA-treated cells showed that DNA single strand breaks and DNA-protein crosslinks were decreased in CALc18/AMSA. The DNA lesions also obtained in m-AMSA-treated nuclei indicated that no drug uptake modification occurred in both cells. Moreover, the in vitro m-AMSA-induced DNA cleavage per unit of decatenating activity and the inhibitory effects of antitumoral drugs on decatenation were not found to be different with topoisomerase II from sensitive or resistant cells. However the specific cleavage induced by m-AMSA/per mg of crude protein from resistant cells was 2 to 3 times decreased. Multidrug resistance gene transcripts were not detected while levels of acidic glutathione S transferase mRNA were found to be 8 to 10-fold greater in resistant than in sensitive cell line with no amplification of the gene. In conclusion, the diminution of topoisomerase II activity and the increase of both topoisomerase I and acidic glutathione S transferase transcripts could contribute to the resistant phenotype of these breast cancer cells.

Quantitative morphological study of Langerhans cells by computerized image analysis

ATPase-stained normal and topical nitrogen mustard treated Langerhans cells (LC) in guinea pig epidermis were studied quantitatively and morphologically by computerized image analysis. Significant correlation and linear regression were found between the perimeter and square root of its area for both cytoplasm and nucleus; a theoretical basis was thus given for morphological identification of LC. The directly measured and derived geometric parameters indicated not only substantial alteration of cytoplasm morphology of post-treated LC such as cytoplasmatosis and dendrites reduction but also a potential change of nuclear size and functional status. We conclude that quantitative morphological analysis is an objective, precise and practical method for LC research.

Chemotaxis of polymorphonuclear leukocytes towards LTB4 in patients with psoriasis in vitro

The random migration and chemotaxis of polymorphonuclear leukocytes (PMN) in agarose were studied in 21 patients with psoriasis and 10 healthy controls. Different concentrations of LTB4 were used as chemoattractants. The random migration and chemotaxis towards lower concentrations of LTB4 were enhanced and that towards higher concentrations of LTB4 reduced in psoriasis. The differences of body involvement, sex, and family history of psoriasis had no influence on PMN migration.