Compositional defects in a MoAlB MAB phase thin film grown by high-power pulsed magnetron sputtering

Various compositional defects such as Mo3Al2B4, Mo4Al3B4, Mo6Al5B6 and Al3Mo, together with MoB MBene, are observed to be coexisting in a MoAlB MAB phase thin film grown at 800 °C by high-power pulsed magnetron sputtering. An overall film composition of Mo0.29Al0.33B0.38 is measured by time-of-flight elastic recoil detection analysis. The concurrent formation of these compositional defects in the MoAlB matrix occurs during the synthesis without using any chemical reagent, and their coexistence with the MAB phase is thermodynamically possible, as elucidated by density functional theory simulations. These defect phases are imaged at the atomic scale by aberration-corrected scanning transmission electron microscopy. A rough estimation of defect populations of 0.073, 0.037, 0.042 and 0.039 nm-1 for Mo3Al2B4, Mo4Al3B4, Mo6Al5B6 and Al3Mo compositional defects, respectively, is performed within the MoAlB matrix. The calculated energies of formation reveal that the Mo4Al3B4 and Mo6Al5B6 defect phases form spontaneously in the MoAlB host matrix, while the energy barrier towards the formation of the metastable Mo3Al2B4 phase is approx. 20 meV per atom. The small magnitude of this barrier is easily overcome during vapor phase condensation, and the surface diffusion of adatoms during deposition leads to local compositional variations and the coexistence of the defect phases in the host matrix. Additionally, at grain boundaries, the presence of MoB MBene is observed, with an interlayer spacing between two Mo2B2 units increasing up to ∼50% compared to the pristine MoAlB phase.

Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy

Oxygen impurities play a crucial role in the glass-forming ability and crystallisation behaviour of metallic glasses. In the present work, single laser tracks were produced on Zr_59.3-xCu_28.8 Al_10.4Nb_1.5O_x substrates (x = 0.3, 1.3) to study the redistribution of oxygen in the melt pool under laser melting, which provides the basis for laser powder bed fusion additive manufacturing. Since such substrates are commercially not available, they were fabricated by arc melting and splat quenching. X-ray diffraction revealed that the substrate with 0.3 at.% oxygen was X-ray amorphous, while the substrate with 1.3 at.% oxygen was partially crystalline. Hence, it is evident that the oxygen content affects the crystallisation kinetics. Subsequently, single laser tracks were produced on the surface of these substrates, and the melt pools attained from the laser processing were characterised by atom probe tomography and transmission electron microscopy. Surface oxidation and subsequent convective flow redistribution of oxygen by laser melting were identified as causes of the presence of CuO_x and crystalline ZrO nanoparticles in the melt pool. Bands of ZrO likely originate from surface oxides that were moved deeper into the melt pool by convective flow. The findings presented here highlight the influence of oxygen redistribution from the surface into the melt pool during laser processing.

Nanoscale Clustering in an Additively Manufactured Zr-Based Metallic Glass Evaluated by Atom Probe Tomography

Composition analysis at the nm-scale, marking the onset of clustering in bulk metallic glasses, can aid the understanding and further optimization of additive manufacturing processes. By atom probe tomography, it is challenging to differentiate nm-scale segregations from random fluctuations. This ambiguity is due to the limited spatial resolution and detection efficiency. Cu and Zr were selected as model systems since the spatial distributions of the isotopes therein constitute ideal solid solutions, as the mixing enthalpy is, by definition, zero. Close agreement is observed between the simulated and measured spatial distributions of the isotopes. Having established the signature of a random distribution of atoms, the elemental distribution in amorphous Zr_59.3Cu_28.8Al_10.4Nb_1.5 samples fabricated by laser powder bed fusion is analyzed. By comparison with the length scales of spatial isotope distributions, the probed volume of the bulk metallic glass shows a random distribution of all constitutional elements, and no evidence for clustering is observed. However, heat-treated metallic glass samples clearly exhibit elemental segregation which increases in size with annealing time. Segregations in Zr_59.3Cu_28.8Al_10.4Nb_1.5 > 1 nm can be observed and separated from random fluctuations, while accurate determination of segregations < 1 nm in size are limited by spatial resolution and detection efficiency.

Decomposition of CrN induced by laser-assisted atom probe tomography

It is known that measurement parameters can significantly influence the elemental composition determined by atom probe tomography (APT). Especially results obtained by laser-assisted APT show a strong effect of the laser pulse energy on the apparent elemental composition. Within this study laser-assisted APT experiments were performed on Cr_0.51N_0.49 and thermally more stable (Cr_0.47Al_0.53)_0.49N_0.51, comparing two different base temperatures (i.e. 15 and 60 K), laser wavelengths (i.e. 532 and 355 nm) and systematically modified laser pulse energies. Absolute chemical compositions from laser-assisted APT were compared to data obtained from ion beam analysis. The deduced elemental composition of CrN exhibited a strong increase of the Cr content when the laser pulse energy was increased for both laser wavelengths. For low laser pulse energies Cr, CrN, N and N₂ ions were identified, while the amount of detected Cr ions increased and the amount of N ions strongly decreased at higher laser pulse energies. Further, increased detection of more complex Cr-containing ions such as Cr₂N at the expense of CrN was observed at higher pulse energies. At the highest pulse energy levels used within this work, the resulting Cr content was > 80 at%, dominated by the amount of detected elemental Cr ions. The change of the mass spectrum of the detected ions with increasing laser pulse energy provides evidence that high laser pulse energies initiate the decomposition of CrN during the APT measurement, consistent with the known thermal decomposition path into Cr₂N and subsequently into Cr and gaseous N. In contrast, variation of the laser pulse energy for the thermally more stable CrAlN resulted only in a slight increase of Cr and a decrease of the resulting concentrations of Al and N with increasing laser pulse energy and no change in the type of detected ions. In conclusion, within the present study, the decomposition of a coating material with low thermal stability induced by laser-assisted APT was reported for the first time, emphasizing the importance of the selection of suitable measurement parameters for metastable materials, which are prone to thermal decomposition.

Effect of Growth Temperature and Atmosphere Exposure Time on Impurity Incorporation in Sputtered Mg, Al, and Ca Thin Films

Impurities can be incorporated during thin film deposition, but also can originate from atmosphere exposure. As impurities can strongly affect the composition-structure-property relations in magnetron sputter deposited thin films, it is important to distinguish between both incorporation channels. Therefore, the impurity incorporation by atmosphere exposure into sputtered Mg, Al, and Ca thin films is systematically studied by a variation of the deposition temperatures and atmosphere exposure times. Deposition temperature variation results in morphological modifications explained by considering surface and bulk diffusion as well as grain boundary motion and evaporation. The film morphologies exhibiting the lowest oxygen concentrations, as measured by energy dispersive X-ray spectroscopy, are obtained at a homologous temperature of 0.4 for both Mg and Al thin films. For Ca, preventing atmosphere exposure is essential to hinder impurity incorporation: By comparing the impurity concentration in Al-capped and uncapped thin films, it is demonstrated that Ca thin films are locally protected by Al-capping, while Mg (and Al) form native passivation layers. Furthermore, it can be learned that the capping (or self-passivation) efficiency in terms of hindering further oxidation of the films in atmosphere is strongly dependent on the underlying morphology, which in turn is defined by the growth temperature.

Atomistic structures of 〈0001〉 tilt grain boundaries in a textured Mg thin film

Nanocrystalline Mg was sputter deposited onto an Ar ion etched Si {100} substrate. Despite an ∼6 nm amorphous layer found at the interface, the Mg thin film exhibits a sharp basal-plane texture enabled by surface energy minimization. The columnar grains have abundant 〈0001〉 tilt grain boundaries in between, most of which are symmetric with various misorientation angles. Up to ∼20° tilt angle, they are composed of arrays of equally-spaced edge dislocations. Ga atoms were introduced from focused ion beam milling and found to segregate at grain boundaries and preferentially decorate the dislocation cores. Most symmetric grain boundaries are type-1, whose boundary planes have smaller dihedral angles with {21̄1̄0} rather than {101̄0}. Atomistic simulations further demonstrate that type-2 grain boundaries, having boundary planes at smaller dihedral angles with {101̄0}, are composed of denser dislocation arrays and hence have higher formation energy than their type-1 counterparts. The finding correlates well with the dominance of type-1 grain boundaries observed in the Mg thin film.

Ag Surface and Bulk Segregations in Sputtered ZrCuAlNi Metallic Glass Thin Films

We report on the formation of Ag-containing ZrCuAlNi thin film metallic glass (nano)composites by a hybrid direct-current magnetron sputtering and high-power pulsed magnetron sputtering process. The effects of Ag content, substrate temperature and substrate bias potential on the phase formation and morphology of the nanocomposites were investigated. While applying a substrate bias potential did not strongly affect the morphological evolution of the films, the Ag content dictated the size and distribution of Ag surface segregations. The films deposited at low temperatures were characterized by strong surface segregations, formed by coalescence and Ostwald ripening, while the volume of the films remained featureless. At higher deposition temperature, elongated Ag segregations were observed in the bulk and a continuous Ag layer was formed at the surface as a result of thermally enhanced surface diffusion. While microstructural observations have allowed identifying both surface and bulk segregations, an indirect method for detecting the presence of Ag segregations is proposed, by measuring the electrical resistivity of the films.

Direct MoB MBene domain formation in magnetron sputtered MoAlB thin films

Two-dimensional (2D) inorganic transition metal boride nanosheets are emerging as promising post-graphene materials in energy research due to their unique properties. State-of-the-art processing strategies are based on chemical etching of bulk material synthesized via solid-state reaction at temperatures above 1000 °C. Here, we report the direct formation of MoB MBene domains in a MoAlB thin film by Al deintercalation from MoAlB in the vicinity of AlO_x regions. Hence, based on these results a straightforward processing pathway for the direct formation of MoB MBene-AlO_x heterostructures without employing chemical etching is proposed here.

Detection of 4a,5-dihydropravastatin as Impurity in the Cholesterol Lowering Drug Pravastatin

Dihydro analogues are known byproducts of the fermentative production of statins and cannot be detected with existing pharmacopoeia analysis methods. We detected dihydropravastatin in most commercial formulations of pravastatin with LC-MS, in some cases in levels requiring identification. In fermentation broth samples of the single step production of pravastatin, we detected and identified for the first time 4a,5-dihydropravastatin, and confirmed that after several recrystallization steps this impurity can be fully removed from the pravastatin powder.

Phase Formation and Thermal Stability of Reactively Sputtered YTaO4-ZrO2 Coatings

Y_(1-x)/2Ta_(1-x)/2Zr_xO₂ coatings with 0 to 44 mol% ZrO₂ were synthesized by sputtering. Phase-pure M'-YTaO₄ coatings were obtained at a substrate temperature of 900 °C. Alloying with ZrO₂ resulted in the growth of M' along with t-Zr(Y,Ta)O₂ for ≤15 mol%, while for ≥28 mol%, ZrO₂ X-ray diffraction (XRD) phase-pure metastable t was formed, which may be caused by small grain sizes and/or kinetic limitations. The former phase region transformed into M' and M and the latter to an M' + t and M + t phase region upon annealing to 1300 and 1650 °C, respectively. In addition to M and t, T-YTa(Zr)O₄ phase fractions were observed at room temperature for ZrO₂ contents ≥28 mol% after annealing to 1650 °C. T phase fractions increased during in situ heating XRD at 80 °C. At 1650 °C, a reaction with the α-Al₂O₃ substrate resulted in the formation of AlTaO₄ and an Al-Ta-Y-O compound.

A Proposal for a Composite with Temperature-Independent Thermophysical Properties: HfV2-HfV2O7

The HfV2-HfV2O7 composite is proposed as a material with potentially temperature-independent thermophysical properties due to the combination of anomalously increasing thermoelastic constants of HfV2 with the negative thermal expansion of HfV2O7. Based on literature data, the coexistence of both a near-zero temperature coefficient of elasticity and a coefficient of thermal expansion is suggested for a composite with a phase fraction of approximately 30 vol.% HfV2 and 70 vol.% HfV2O7. To produce HfV2-HfV2O7 composites, two synthesis pathways were investigated: (1) annealing of sputtered HfV2 films in air to form HfV2O7 oxide on the surface and (2) sputtering of HfV2O7/HfV2 bilayers. The high oxygen mobility in HfV2 is suggested to inhibit the formation of crystalline HfV2-HfV2O7 composites by annealing HfV2 in air due to oxygen-incorporation-induced amorphization of HfV2. Reducing the formation temperature of crystalline HfV2O7 from 550 °C, as obtained upon annealing, to 300 °C using reactive sputtering enables the synthesis of crystalline bilayered HfV2-HfV2O7.

Electronic excitation of transition metal nitrides by light ions with keV energies

We investigated the specific electronic energy deposition by protons and He ions with keV energies in different transition metal nitrides of technological interest. Data were obtained from two different time-of-flight ion scattering setups and show excellent agreement. For protons interacting with light nitrides, i.e. TiN, VN and CrN, very similar stopping cross sections per atom were found, which coincide with literature data of N2gas for primary energies ⩽25 keV. In case of the chemically rather similar nitrides with metal constituents from the 5thand 6thperiod, i.e. ZrN and HfN, the electronic stopping cross sections were measured to exceed what has been observed for molecular N2gas. For He ions, electronic energy loss in all nitrides was found to be significantly higher compared to the equivalent data of N2gas. Additionally, deviations from velocity proportionality of the observed specific electronic energy loss are observed. A comparison with predictions from density functional theory for protons and He ions yields a high apparent efficiency of electronic excitations of the target for the latter projectile. These findings are considered to indicate the contributions of additional mechanisms besides electron hole pair excitations, such as electron capture and loss processes of the projectile or promotion of target electrons in atomic collisions.

Remote Tracking of Phase Changes in Cr2AlC Thin Films by In-situ Resistivity Measurements

Resistivity changes of magnetron sputtered, amorphous Cr₂AlC thin films were measured during heating in vacuum. Based on correlative X-ray diffraction, in-situ and ex-situ selected area electron diffraction measurements and differential scanning calorimetry data from literature it is evident that the resistivity changes at 552 ± 4 and 585 ± 13 °C indicate the phase transitions from amorphous to a hexagonal disordered solid solution structure and from the latter to MAX phase, respectively. We have shown that phase changes in Cr₂AlC thin films can be revealed by in-situ measurements of thermally induced resistivity changes.

The Action on Blood Clotting of Different Lipoid Fractions of Beef Brain* (Methods of Fractionization and Chromatographic Isolation Procedure of a Phospholipid Anticoagulant)

A method of fractionation and isolation of a lipid anticoagulant from beef brain has been described. This method is based on chemical and chromatographic techniques. The lipid anticoagulant was found to be an inositol monophosphatide containing two different fatty acids. The anticoagulant activity has been evidenced in the Russell-viper-venom test and is believed to interfere with the formation of the early intermediate products involving factor X.

Metastable phase formation of Pt-X (X = Ir, Au) thin films

The dependence of phase formation and mechanical properties on the chemical composition has been investigated for Pt-Ir and Pt-Au combinatorial thin films. The formation of a single, metastable Pt-Ir solid solution has been observed for all experimental compositions and temperatures. Upon Ir addition to Pt the experimentally determined changes in lattice parameter and Young’s modulus display rule of mixture behavior which is in good agreement with our ab initio data. Whereas, in the Pt-Au system, the single metastable solid solution decomposes into two phases as the growth temperature is raised to ≥600 °C. The lattice parameters in the dual phase region are independent of chemical composition. The substrate temperature and chemical composition dependent phase formation in Pt-Ir and Pt-Au thin films can be rationalized based on CALPHAD (CALculation of PHAse Diagrams) results combined with estimations of the activation energy required for surface diffusion: The metastable phase formation during film growth is caused by kinetic limitations, where Ir atoms (in Pt-Ir) need to overcome an up to factor 6 higher activation energy barrier than Au (in Pt-Au) to enable surface diffusion.

Pure and Oxidized Copper Materials as Potential Antimicrobial Surfaces for Spaceflight Activities

Microbial biofilms can lead to persistent infections and degrade a variety of materials, and they are notorious for their persistence and resistance to eradication. During long-duration space missions, microbial biofilms present a danger to crew health and spacecraft integrity. The use of antimicrobial surfaces provides an alternative strategy for inhibiting microbial growth and biofilm formation to conventional cleaning procedures and the use of disinfectants. Antimicrobial surfaces contain organic or inorganic compounds, such as antimicrobial peptides or copper and silver, that inhibit microbial growth. The efficacy of wetted oxidized copper layers and pure copper surfaces as antimicrobial agents was tested by applying cultures of Escherichia coli and Staphylococcus cohnii to these metallic surfaces. Stainless steel surfaces were used as non-inhibitory control surfaces. The production of reactive oxygen species and membrane damage increased rapidly within 1 h of exposure on pure copper surfaces, but the effect on cell survival was negligible even after 2 h of exposure. However, longer exposure times of up to 4 h led to a rapid decrease in cell survival, whereby the survival of cells was additionally dependent on the exposed cell density. Finally, the release of metal ions was determined to identify a possible correlation between copper ions in suspension and cell survival. These measurements indicated a steady increase of free copper ions, which were released indirectly by cells presumably through excreted complexing agents. These data indicate that the application of antimicrobial surfaces in spaceflight facilities could improve crew health and mitigate material damage caused by microbial contamination and biofilm formation. Furthermore, the results of this study indicate that cuprous oxide layers were superior to pure copper surfaces related to the antimicrobial effect and that cell density is a significant factor that influences the time dependence of antimicrobial activity. Key Words: Contact killing-E. coli-S. cohnii-Antimicrobial copper surfaces-Copper oxide layers-Human health-Planetary protection. Astrobiology 17, 1183-1191.

Crystallite size-dependent metastable phase formation of TiAlN coatings

It is well known that surface energy differences thermodynamically stabilize nanocrystalline γ-Al2O3 over α-Al2O3. Here, through correlative ab initio calculations and advanced material characterization at the nanometer scale, we demonstrate that the metastable phase formation of nanocrystalline TiAlN, an industrial benchmark coating material, is crystallite size-dependent. By relating calculated surface and volume energy contributions to the total energy, we predict the chemical composition-dependent phase boundary between the two metastable solid solution phases of cubic and wurzite Ti1-xAlxN. This phase boundary is characterized by the critical crystallite size d critical . Crystallite size-dependent phase stability predictions are in very good agreement with experimental phase formation data where x was varied by utilizing combinatorial vapor phase condensation. The wide range of critical Al solubilities for metastable cubic Ti1-xAlxN from x max = 0.4 to 0.9 reported in literature and the sobering disagreement thereof with DFT predictions can at least in part be rationalized based on the here identified crystallite size-dependent metastable phase formation. Furthermore, it is evident that predictions of critical Al solubilities in metastable cubic TiAlN are flawed, if the previously overlooked surface energy contribution to the total energy is not considered.

Stereoisomeric Composition of Natural Myrtucommulone A

Myrtucommulone A (MC A) (1), isolated from Myrtus communis (myrtle), shows the same pharmacological activity for inhibition of inflammation and induction of apoptosis as synthetic MC A, which consists of three stereoisomers, i.e., two enantiomers and one meso form. This led to the question of whether the natural MC A is a pure stereoisomer or a mixture of stereoisomers. The specific rotation and electronic circular dichroism (ECD) data of natural MC A (1) as well as of a pentacyclic derivative 4 revealed that naturally occurring MC A (1) consists of the racemate and the meso form in a 1:1 ratio. A probable precursor of MC A (1), nor-semimyrtucommulone (5), was also isolated from myrtle as a racemate. The absolute configurations of the enantiomers of 1 and 5 were determined using a combination of experimental and quantum-chemical calculated ECD spectra.

Vacancy filling effect in thermoelectric NbO

Using density functional theory, we have systematically explored the 1a and 1b vacancy filling in NbO (space group Pm-3m) with Nb and N, respectively, to design compounds with large Seebeck coefficients. The most dominating effect was identified for filling of 1b Wyckoff sites with N giving rise to a fivefold increase in the Seebeck coefficient. This may be understood based on the electronic structure. Nb d-nonmetal p hybridization induces quantum confinement and hence enables the enhancement of the Seebeck coefficient. This was validated by measuring the Seebeck coefficient of reactively sputtered thin films. At 800 °C these electrically conductive oxynitrides exhibit the Seebeck coefficient of -70 µV K(-1), which is the largest absolute value ever reported for these compounds.

Menthol suppresses nicotinic acetylcholine receptor functioning in sensory neurons via allosteric modulation

In this study, we have investigated how the function of native and recombinant nicotinic acetylcholine receptors (nAChRs) is modulated by the monoterpenoid alcohol from peppermint (−) menthol. In trigeminal neurons (TG), we found that nicotine (75 μM)-activated whole-cell currents through nAChRs were reversibly reduced by menthol in a concentration-dependent manner with an IC₅₀ of 111 μM. To analyze the mechanism underlying menthol's action in more detail, we used single channel and whole-cell recordings from recombinant human α4β2 nAChR expressed in HEK tsA201 cells. Here, we found a shortening of channel open time and a prolongation of channel closed time, and an increase in single channel amplitude leading in summary to a reduction in single channel current. Furthermore, menthol did not affect nicotine's EC₅₀ value for currents through recombinant human α4β2 nAChRs but caused a significant reduction in nicotine's efficacy. Taken together, these findings indicate that menthol is a negative allosteric modulator of nAChRs.

Spectroscopic evidence for an all-ferrous [4Fe-4S]0 cluster in the superreduced activator of 2-hydroxyglutaryl-CoA dehydratase from Acidaminococcus fermentans

The key enzyme of the fermentation of glutamate by Acidaminococcus fermentans, 2-hydroxyglutaryl-coenzyme A dehydratase, catalyzes the reversible syn-elimination of water from (R)-2-hydroxyglutaryl-coenzyme A, resulting in (E)-glutaconylcoenzyme A. The dehydratase system consists of two oxygen-sensitive protein components, the activator (HgdC) and the actual dehydratase (HgdAB). Previous biochemical and spectroscopic studies revealed that the reduced [4Fe-4S]+ cluster containing activator transfers one electron to the dehydratase driven by ATP hydrolysis, which activates the enzyme. With a tenfold excess of titanium(III) citrate at pH 8.0 the activator can be further reduced, yielding about 50% of a superreduced [4Fe-4S]0 cluster in the all-ferrous state. This is inferred from the appearance of a new Mössbauer spectrum with parameters delta = 0.65 mm/s and deltaE(Q) = 1.51-2.19 mm/s at 140 K, which are typical of Fe(II)S4 sites. Parallel-mode electron paramagnetic resonance (EPR) spectroscopy performed at temperatures between 3 and 20 K showed two sharp signals at g = 16 and 12, indicating an integer-spin system. The X-band EPR spectra and magnetic Mössbauer spectra could be consistently simulated by adopting a total spin S(t) = 4 for the all-ferrous cluster with weak zero-field splitting parameters D = -0.66 cm(-1) and E/D = 0.17. The superreduced cluster has apparent spectroscopic similarities with the corresponding [4Fe-4S]0 cluster described for the nitrogenase Fe-protein, but in detail their properties differ. While the all-ferrous Fe-protein is capable of transferring electrons to the MoFe-protein for dinitrogen reduction, a similar physiological role is elusive for the superreduced activator. This finding supports our model that only one-electron transfer steps are involved in dehydratase catalysis. Nevertheless we discuss a common basic mechanism of the two diverse systems, which are so far the only described examples of the all-ferrous [4Fe-4S]0 cluster found in biology.

Mechanistic analysis of acyl transferase domain exchange in polyketide synthase modules

Many polyketides are synthesized by a class of multifunctional enzymes called type I modular polyketide synthases (PKSs). Several reports have described the power of predictively altering polyketide structure by replacing individual PKS domains with homologues from other PKSs. For example, numerous erythromycin analogues have been generated by replacing individual methylmalonyl-specific acyl transferase (AT) domains of the 6-deoxyerythronolide B synthase (DEBS) with malonyl-, ethylmalonyl-, or methoxymalonyl-specific domains. However, the construction of hybrid PKS modules often attenuates product formation both kinetically and distributively. The molecular basis for this mechanistic imperfection is not understood. We have systematically analyzed the impact of replacing an AT domain of DEBS on acyl-AT formation, acyl-CoA:HS-NAc acyl transferase activity, acyl-CoA:ACP acyl transferase activity (nucleophile charging), acyl-SNAc:ketosynthase acyl transferase activity (electrophile charging), and beta-ketoacyl ACP synthase activity (condensation). As usual, domain junctions were located in interdomain regions flanking the AT domain. Kinetic analysis of hybrid modules containing either malonyl transferase or methylmalonyl transferase domains revealed a 15-20-fold decrease in overall turnover numbers of the hybrid modules as compared to the wild-type module. In contrast, both the activity and the specificity of the heterologous AT domains remained unaffected. Moreover, no defects could be detected in the ability of the heterologous AT domains to catalyze acyl-CoA:ACP acyl transfer. Single turnover studies aimed at directly probing the ketosynthase-catalyzed reaction led to two crucial findings. First, wild-type modules catalyzed chain elongation with comparable efficiency regardless of whether methylmalonyl-ACP or malonyl-ACP were the nucleophilic substrates. Second, chain elongation in all hybrid modules tested was seriously attenuated relative to the wild-type module. Our data suggest that, as currently practiced, the most deleterious impact of AT domain swapping is not on the substrate specificity. Rather, it is due to the impaired ability of the KS and ACP domains in the hybrid module to catalyze chain elongation. Consistent with this proposal, limited proteolysis of wild-type and hybrid modules showed major differences in cleavage patterns, especially in the region between the KR and ACP domains.

A two [4Fe-4S]-cluster-containing ferredoxin as an alternative electron donor for 2-hydroxyglutaryl-CoA dehydratase from Acidaminococcus fermentans

The key step in the fermentation of glutamate by Acidaminococcus fermentans is a reversible syn-elimination of water from ( R)-2-hydroxyglutaryl-CoA to ( E)-glutaconyl-CoA catalyzed by 2-hydroxyglutaryl-CoA dehydratase, a two-component enzyme system. The actual dehydration is mediated by component D, which contains 1.0 [4Fe-4S](2+) cluster, 1.0 reduced riboflavin-5'-phosphate and about 0.1 molybdenum (VI) per heterodimer. The enzyme has to be activated by the extremely oxygen-sensitive [4Fe-4S](1+/2+)-cluster-containing homodimeric component A, which generates Mo(V) by an ATP/Mg(2+)-induced one-electron transfer. Previous experiments established that the hydroquinone state of a flavodoxin (m=14.6 kDa) isolated from A. fermentans served as one-electron donor of component A, whereby the blue semiquinone is formed. Here we describe the isolation and characterization of an alternative electron donor from the same organism, a two [4Fe-4S](1+/2+)-cluster-containing ferredoxin (m=5.6 kDa) closely related to that from Clostridium acidiurici. The protein was purified to homogeneity and almost completely sequenced; the magnetically interacting [4Fe-4S] clusters were characterized by EPR and Mössbauer spectroscopy. The redox potentials of the ferredoxin were determined as -405 mV and -340 mV. Growth experiments with A. fermentans in the presence of different iron concentrations in the medium (7-45 microM) showed that flavodoxin is the dominant electron donor protein under iron-limiting conditions. Its concentration continuously decreased from 3.5 micromol/g protein at 7 microM Fe to 0.02 micromol/g at 45 microM Fe. In contrast, the concentration of ferredoxin increased stepwise from about 0.2 micromol/g at 7-13 microM Fe to 1.1+/-0.1 micromol/g at 17-45 microM Fe.

Adenosine triphosphate-induced electron transfer in 2-hydroxyglutaryl-CoA dehydratase from Acidaminococcus fermentans

2-hydroxyglutaryl-CoA dehydratase from Acidaminococcus fermentans catalyzes the chemical difficult elimination of water from (R)-2-hydroxyglutaryl-CoA to glutaconyl-CoA. The enzyme consists of two oxygen-sensitive protein components, the homodimeric activator (A) with one [4Fe-4S]1+/2+ cluster and the heterodimeric dehydratase (D) with one nonreducible [4Fe-4S]2+ cluster and reduced riboflavin 5'-monophosphate (FMNH2). For activation, ATP, Mg2+, and a reduced flavodoxin (16 kDa) purified from A. fermentans are required. The [4Fe-4S](1+/2+) cluster of component A is exposed to the solvent since it is accessible to iron chelators. Upon exchange of the bound ADP by ATP, the chelation rate is 8-fold enhanced, indicating a large conformational change. Oxidized component A exhibits ATPase activity of 6 s(-1), which is completely abolished upon reduction by one electron. UV-visible spectroscopy revealed a spontaneous one-electron transfer from flavodoxin hydroquinone (E(0)' = -430 mV) to oxidized component A, whereby the [4Fe-4S]2+ cluster of component A became reduced. Combined kinetic, EPR, and Mössbauer spectrocopic investigations exhibited an ATP-dependent oxidation of component A by component D. Whereas the [4Fe-4S]2+ cluster of component D remained in the oxidized state, a new EPR signal became visible attributed to a d1-metal species, probably Mo(V). Metal analysis with neutron activation and atomic absorption spectroscopy gave 0.07-0.2 Mo per component D. In summary, the data suggest that in the presence of ATP one electron is transferred from flavodoxin hydroquinone via the [4Fe-4S]1+/2+ cluster of component A to Mo(VI) of component D, which is thereby reduced to Mo(V). The latter may supply the electron necessary for transient charge reversal in the unusual dehydration.

Crystal structure of the Acidaminococcus fermentans 2-hydroxyglutaryl-CoA dehydratase component A

Acidaminococcus fermentans degrades glutamate via the hydroxyglutarate pathway, which involves the syn-elimination of water from (R)-2-hydroxyglutaryl-CoA in a key reaction of the pathway. This anaerobic process is catalyzed by 2-hydroxyglutaryl-CoA dehydratase, an enzyme with two components (A and D) that reversibly associate during reaction cycles. Component A (CompA), a homodimeric protein of 2x27 kDa, contains a single, bridging [4Fe-4S] cluster and uses the hydrolysis of ATP to deliver an electron to the dehydratase component (CompD), where the electron is used catalytically. The structure of the extremely oxygen-sensitive CompA protein was solved by X-ray crystallography to 3 A resolution. The protein was found to be a member of the actin fold family, revealing a similar architecture and nucleotide-binding site. The key differences between CompA and other members of the actin fold family are: (i) the presence of a cluster binding segment, the "cluster helix"; (ii) the [4Fe-4S] cluster; and (iii) the location of the homodimer interface, which involves the bridging cluster. Possible reaction mechanisms are discussed in light of the close structural similarity to members of the actin-fold family and the functional similarity to the nitrogenase Fe- protein.

The iron-sulfur clusters in 2-hydroxyglutaryl-CoA dehydratase from Acidaminococcus fermentans. Biochemical and spectroscopic investigations

The reversible dehydration of (R)-2-hydroxyglutaryl-CoA to (E)-glutaconyl-CoA is catalysed by the combined action of two oxygen-sensitive enzymes from Acidaminococcus fermentans, the homodimeric component A (2 x 27 kDa) and the heterodimeric component D (45 and 50 kDa). Component A was purified to homogeneity (specific activity 25-30 s-1) using streptavidin-tag affinity chromatography. In the presence of 5 mM MgCl2 and 1 mM ADP or ATP, component A could be stabilized and stored for 4-5 days at 4 degrees C without loss of activity. The purification of component D from A. fermentans was also improved as indicated by the 1.5-fold higher specific activity (15 s-1). The content of 1.0 riboflavin 5'-phosphate (FMN) per heterodimer could be confirmed, whereas in contrast to an earlier report only trace amounts of riboflavin (< 0.1) could be detected. Each active component contains an oxygen sensitive diamagnetic [4Fe-4S]2+ cluster as revealed by UV-visible, EPR and Mössbauer spectroscopy. Reduction of the [4Fe-4S]2+ cluster in component A with dithionite yields a paramagnetic [4Fe-4S]1+ cluster with the unusual electron spin ground state S = 3/2 as indicated by strong absorption type EPR signals at high g values, g = 4-6. Spin-Hamiltonian simulations of the EPR spectra and of magnetic Mössbauer spectra were performed to determine the zero field splitting (ZFS) parameters of the cluster and the 57Fe hyperfine interaction parameters. The electronic properties of the [4Fe-4S]2+, 1+ clusters of component A are similar to those of the nitrogenase iron protein in which a [4Fe-4S]2+ cluster bridges the two subunits of the homodimeric protein. Under air component A looses its activity within seconds due to irreversible degradation of its [4Fe-4S]2+ cluster to a [2Fe-2S]2+ cluster. The [4Fe-4S]2+ cluster of component D could not be reduced to a [4Fe-4S]1+ cluster, even with excess of Ti(III)citrate or dithionite. Exposure to oxic conditions slowly converts the diamagnetic [4Fe-4S]2+ cluster of component D to a paramagnetic [3Fe-4S]+ cluster concomitant with loss of activity (30% within 24 h at 4 degrees C).

Cephalometric assessment of snoring and nonsnoring children

STUDY OBJECTIVE

To determine the differences in craniofacial cephalometric variables between snoring and nonsnoring children.

DESIGN

Cross-sectional.

SETTING

Case Western Reserve University Dental School, Department of Orthodontics, and local Cleveland orthodontic private practices.

PATIENTS

Twenty-eight snoring and 28 nonsnoring children between the ages of 7 years and 14 years. Nonsnoring subjects were matched to snoring subjects by age, sex, and ethnicity (mean [+/- SD] age, 10+/-2 years; 82% white, 64% female).

INTERVENTIONS

None.

MEASUREMENTS

Snoring was assessed using a sleep behavior questionnaire administered to parents or guardians. The cephalometric radiographs of the study subjects were traced by a single investigator, and 1 angular measurement and 11 linear measurements of hard and soft tissues were recorded. The paired Student's t test was used to analyze the cephalometric data.

RESULTS

Snoring children manifest a significantly narrower anterior-posterior dimension of the pharynx at the superior and most narrow widths. Snoring children also had a greater length from the hyoid to the mandibular plane.

CONCLUSIONS

Snoring children appear to present craniofacial factors that differ from those of nonsnoring children.

2-hydroxyglutaryl-CoA dehydratase from Clostridium symbiosum

Component D (HgdAB) of 2-hydroxyglutaryl-CoA dehydratase from Clostridium symbiosum was purified to homogeneity. It is able to use component A from Acidaminococcus fermentans (HgdC) to initiate catalysis together with ATP, Mg2+ and a strong reducing agent such as Ti(III)citrate. Component D from C. symbiosum has a 6 x higher specific activity compared with that from A. fermentans and contains a second [4Fe-4S] cluster but the same amount of riboflavin 5'-phosphate (1.0 per heterodimeric enzyme, m = 100 kDa). Mössbauer spectroscopy revealed symmetric cube-type structures of the two [4Fe-4S]2+ clusters. EPR spectroscopy showed the resistance of the clusters to reducing agents, but detected a sharp signal at g = 2. 004 probably due to a stabilized flavin semiquinone. Three genes from C. symbiosum coding for components D (hgdA and hgdB) and A (hgdC) were cloned and sequenced. Primer extension experiments indicated that the genes are transcribed in the order hgdCAB from an operon only half the size of that from A. fermentans. Sequence comparisons detected a close relationship to the dehydratase system from A. fermentans and HgdA from Fusobacterium nucleatum, as well as to putative proteins of unknown function from Archaeoglobus fulgidus. Lower, but significant, identities were found with putative enzymes from several methanogenic Archaea and Escherichia coli, as well as with the mechanistically related benzoyl-CoA reductases from the Proteobacteria Rhodopseudomonas palustris and Thauera aromatica.

Structural elements in domain IV that influence biophysical and pharmacological properties of human alpha1A-containing high-voltage-activated calcium channels

We have cloned two splice variants of the human homolog of the alpha1A subunit of voltage-gated Ca2+ channels. The sequences of human alpha1A-1 and alpha1A-2 code for proteins of 2510 and 2662 amino acids, respectively. Human alpha1A-2alpha2bdeltabeta1b Ca2+ channels expressed in HEK293 cells activate rapidly (tau+10mV = 2.2 ms), deactivate rapidly (tau-90mV = 148 micros), inactivate slowly (tau+10mV = 690 ms), and have peak currents at a potential of +10 mV with 15 mM Ba2+ as charge carrier. In HEK293 cells transient expression of Ca2+ channels containing alpha1A/B(f), an alpha1A subunit containing a 112 amino acid segment of alpha1B-1 sequence in the IVS3-IVSS1 region, resulted in Ba2+ currents that were 30-fold larger compared to wild-type (wt) alpha1A-2-containing Ca2+ channels, and had inactivation kinetics similar to those of alpha1B-1-containing Ca2+ channels. Cells transiently transfected with alpha1A/B(f)alpha2bdeltabeta1b expressed higher levels of the alpha1, alpha2bdelta, and beta1b subunit polypeptides as detected by immunoblot analysis. By mutation analysis we identified two locations in domain IV within the extracellular loops S3-S4 (N1655P1656) and S5-SS1 (E1740) that influence the biophysical properties of alpha1A. alpha1AE1740R resulted in a threefold increase in current magnitude, a -10 mV shift in steady-state inactivation, and an altered Ba2+ current inactivation, but did not affect ion selectivity. The deletion mutant alpha1ADeltaNP shifted steady-state inactivation by -20 mV and increased the fast component of current inactivation twofold. The potency and rate of block by omega-Aga IVA was increased with alpha1ADeltaNP. These results demonstrate that the IVS3-S4 and IVS5-SS1 linkers play an essential role in determining multiple biophysical and pharmacological properties of alpha1A-containing Ca2+ channels.

Functional consequences of mutations in the human alpha1A calcium channel subunit linked to familial hemiplegic migraine

Mutations in alpha1A, the pore-forming subunit of P/Q-type calcium channels, are linked to several human diseases, including familial hemiplegic migraine (FHM). We introduced the four missense mutations linked to FHM into human alpha1A-2 subunits and investigated their functional consequences after expression in human embryonic kidney 293 cells. By combining single-channel and whole-cell patch-clamp recordings, we show that all four mutations affect both the biophysical properties and the density of functional channels. Mutation R192Q in the S4 segment of domain I increased the density of functional P/Q-type channels and their open probability. Mutation T666M in the pore loop of domain II decreased both the density of functional channels and their unitary conductance (from 20 to 11 pS). Mutations V714A and I1815L in the S6 segments of domains II and IV shifted the voltage range of activation toward more negative voltages, increased both the open probability and the rate of recovery from inactivation, and decreased the density of functional channels. Mutation V714A decreased the single-channel conductance to 16 pS. Strikingly, the reduction in single-channel conductance induced by mutations T666M and V714A was not observed in some patches or periods of activity, suggesting that the abnormal channel may switch on and off, perhaps depending on some unknown factor. Our data show that the FHM mutations can lead to both gain- and loss-of-function of human P/Q-type calcium channels.

Structure and functional characterization of a novel human low-voltage activated calcium channel

We have isolated and characterized overlapping cDNAs encoding a novel, voltage-gated Ca2+ channel alpha1 subunit, alpha1H, from a human medullary thyroid carcinoma cell line. The alpha1H subunit is structurally similar to previously described alpha1 subunits. Northern blot analysis indicates that alpha1H mRNA is expressed throughout the brain, primarily in the amygdala, caudate nucleus, and putamen, as well as in several nonneuronal tissues, with relatively high levels in the liver, kidney, and heart. Ba2+ currents recorded from human embryonic kidney 293 cells transiently expressing alpha1H activated at relatively hyperpolarized potentials (-50 mV), rapidly inactivated (tau = 17 ms), and slowly deactivated. Similar results were observed in Xenopus oocytes expressing alpha1H. Single-channel measurements in human embryonic kidney 293 cells revealed a single-channel conductance of approximately 9 pS. These channels are blocked by Ni2+ (IC50 = 6.6 microM) and the T-type channel antagonists mibefradil (approximately 50% block at 1 microM) and amiloride (IC50 = 167 microM). Thus, alpha1H-containing channels exhibit biophysical and pharmacological properties characteristic of low voltage-activated, or T-type, Ca2+ channels.

Average African American three-dimensional computed tomography skull images: the potential clinical importance of ethnicity and sex

The production of average 'normative' three-dimensional (3D) computed tomography surface images of the bony skull has only recently been explored. The authors wish to determine the effect of using sex- and ethnicity-specific adult average 3D skull images for comparisons with patient images at various stages of craniofacial surgical management (i.e., diagnosis, treatment planning, prosthetic design, image-guided operative procedures, and outcomes assessment). Craniofacial surgical reconstruction for abnormal patterns of development, cancer resection, or trauma are most likely to benefit from these comparisons. To morphometrically test the significance of separating normative 3D skull data by sex and ethnicity, the authors collected 52 3D, anatomical landmarks from 3D computed tomography scans of dry skulls of 20 Americans of European ethnicity and 20 Americans of primarily African (i.e., primarily African and some European) ethnicity. A Procrustes-based morphometric analysis of shape detects 1.2 times as much interethnic variance as intersex variance. The African American sample presents 4.2% more dolichocephaly, wider orbits, flatter nasal area, larger gnathic anatomy, and more procumbent dentition. Pooling the sexes across both groups, it is seen that men tend to have less bulbous crania, more protruding brows, noses, and masticatory muscle attachments, and relatively less protrusive palettes and anterior mandibles. Despite a small sample size (N = 40), the authors' results are statistically significant (P approximately 0.001 overall) for both of the main factors, sex and ethnicity, separately.

Contribution of craniofacial risk factors in increasing apneic activity among obese and nonobese habitual snorers

STUDY OBJECTIVE

To determine the role of craniofacial risk factors in increasing apneic activity between nonobese and obese habitual snorers.

DESIGN

Cross-sectional.

SETTING

Care-seeking volunteers identified through advertisements, and referral-based volunteers from two sleep centers serving the greater Cleveland area.

PATIENTS

The study included 142 habitual snorers (mean +/- SD, 45.5 +/- 10.6 years, 68% men; 20% African-Americans)

MEASUREMENTS AND RESULTS

Apneic activity was determined using unattended home sleep monitoring to assess the respiratory disturbance index (RDI). Independent variables included body mass index, cranial index, facial index, and 13 anatomic variables (lateral and frontal cephalometric radiographs were used to characterize craniofacial hard and soft tissues). A linear regression model explained approximately 54% and 53% of the variation in RDI (log transformed) scores for the nonobese and obese groups, respectively. The largest predictor of RDI in the nonobese group was tongue length, followed by alignment of the middle cranial fossa, and age. In the obese group, the largest predictor of RDI was hyoid to mandibular plane, followed by tongue length.

CONCLUSIONS

Measurements of soft tissues of the oropharynx (especially the tongue) are more closely associated with increased apneic activity. In addition, the hard tissue anatomic limits of the oropharynx may place nonobese individuals in the at-risk group. Therefore, anatomic relationships that are temporally stable may be useful to predict apneic activity in later years.

Characteristics of a human N-type calcium channel expressed in HEK293 cells

The human alpha 1B-1 alpha 2b beta 1-2 Ca2+ channel was stably expressed in HEK293 cells producing a human brain N-type voltage-dependent calcium channel (VDCC). Whole cell voltage-clamp electrophysiology and fura-2 based microfluorimetry have been used to study its characteristics. Calcium currents (ICa) recorded in transfected HEK293 cells were activated at potentials more depolarized than -20 mV with peak currents occurring at approx + 10 mV in 5 mM extracellular CaCl2. ICa and associated rises in intracellular free calcium concentrations ([Ca2+]i) were sensitive to changes in both the [Ca2+]o and holding potential. Steady-state inactivation was half maximal at a holding potential of -60 mV. Ba2+ was a more effective charge carrier than Ca2+ through the alpha 1B-1 alpha 2b beta 1-2 Ca2+ channel and combinations of both Ba2+ and Ca2+ as charge carriers resulted in the anomalous mole fraction effect. Ca2+ influx into transfected HEK293 cells was irreversibly inhibited by omega-conotoxin-GVIA (omega-CgTx-GVIA; 10 nM-1 microM) and omega-conotoxin-MVIIA; 100 nM-1 microM) whereas 1 microM) whereas no reductions were seen with agents which block P or L-type Ca2+ channels. The inorganic ions, gadolinium (Gd3+), cadmium (Cd2+) and nickel (Ni2+) reduced the ICa under voltage-clamp conditions in a concentration-dependent manner. The order of potency of the three ions was Gd3+ > Cd2+ > Ni2+. These experiments suggest that the cloned and expressed alpha 1B-1 alpha 2b beta 1-2 Ca2+ channel subunits form channels in HEK293 cells that exhibit properties consistent with the activity of the native-N-type VDCC previously described in neurons.

Activation of Ca2+ signaling in neutrophils by the mast cell-released immunophilin FKBP12

The immunophilins of the FK506-binding protein (FKBP) family are intracellular proteins that bind the immunosuppresants FK506 and rapamycin. In this study we show that HMC-1 mast cells sensitized with IgE release FKBP12 upon stimulation with anti-IgE. The release is rapid and not affected by actinomycin D or cycloheximide, suggesting that it is due to exocytosis from a storage compartment. FKBP12 from HMC-1 mast cells exhibits biological activity. When applied extracellularly to human neutrophils, it induces transient changes in the intracellular Ca2+ concentration ([Ca2+]i) due to Ca2+ release from intracellular stores. Inhibition of [Ca2+]i changes by ruthenium red and ryanodine indicates that ryanodine receptor/Ca2+ release channels are involved in FKBP12-induced Ca2+ signaling. Neutrophil activation by mast cell-derived FKBP12 is prevented by complexing FKBP12 with FK506 or rapamycin. These results demonstrate that extracellular FKBP12 functions as a cytokine in cell-to-cell communication. They further suggest a pathophysiological role for FKBP12 as a mediator in immediate or type I hypersensitivity and may have implications for novel therapeutic strategies in the treatment of allergic disorders with FK506 and rapamycin.

Structure and functional characterization of neuronal alpha 1E calcium channel subtypes

We have cloned overlapping cDNAs encoding alpha 1E Ca2+ channel subunits from mouse and human brain. We observed that these alpha 1E transcripts were widely distributed in the central nervous system. We also demonstrated the existence of two variants of the human alpha 1E subunit. Comparison of the sequence of these alpha 1E subunits to those from other species suggests that at least four alternatively spliced variants of alpha 1E exist. Expression of human alpha 1E in HEK293 cells and Xenopus oocytes produced high voltage-activated Ca2+ currents that inactivated rapidly (tau approximately 20 ms at 0 mV). The size of the currents obtained were enhanced approximately 40-fold by co-expression with human neuronal alpha 2 and beta Ca2+ channel subunits. alpha 1E currents were insensitive to the drugs and toxins previously used to define other classes of voltage-activated Ca2+ channels. Thus, alpha 1E-mediated Ca2+ channels appear to be a pharmacologically distinct class of voltage-activated Ca2+ channels.

Presynaptic calcium signals during neurotransmitter release: detection with fluorescent indicators and other calcium chelators

Synthetic calcium buffers, including fluorescent calcium indicators, were microinjected into squid 'giant' presynaptic nerve terminals to investigate the calcium signal that triggers neurotransmitter secretion. Digital imaging methods, applied in conjunction with the fluorescent calcium indicator dye fura-2, reveal that transient rises in presynaptic calcium concentration are associated with action potentials. Transmitter release terminates within 1-2 ms after a train of action potentials, even though presynaptic calcium concentration remains at micromolar levels for many seconds longer. Microinjection of the calcium buffer, EGTA, into the presynaptic terminal has no effect on transmitter release evoked by single presynaptic action potentials. EGTA injection does, however, block the change in calcium concentration measured by fura-2. Therefore, the calcium signal measured by fura-2 is not responsible for triggering release. These results suggest that the rise in presynaptic calcium concentration that triggers release must be highly localized to escape detection with fura-2 imaging. Unlike EGTA, microinjection of BAPTA--a calcium buffer with an equilibrium affinity for calcium similar to that of EGTA--produces a potent, dose-dependent, and reversible block of action-potential evoked transmitter release. The superior ability of BAPTA to block transmitter release apparently is due to the more rapid calcium-binding kinetics of BAPTA compared to EGTA. Because EGTA should bind calcium within a few tens of microseconds under the conditions of our experiments, the inability of EGTA to block release indicates that transmitter release is triggered within a few tens of microseconds after the entry of calcium into the presynaptic terminal.(ABSTRACT TRUNCATED AT 250 WORDS)

Molecular pathways for presynaptic calcium signaling

The results presented in this article describe two distinct, Ca-regulated molecular pathways in presynaptic terminals and implicate these two pathways in differentially mediating neurotransmitter secretion and PTP. Our current view of the Ca-dependent triggering of secretion and PTP is shown in Fig. 9. According to this scheme, differential activation of these two pathways is achieved by a combination of diffusion-based dilution of Ca that enters the terminal through voltage-gated Ca channels and by coupling these pathways to Ca receptors with different affinities for Ca ions. A simple way to achieve these conditions is to position these two receptors at different distances from the Ca channels, as shown in Fig. 2. Given that Ca ions are involved in activating many different presynaptic processes (Fig. 1), we propose that closer scrutiny of the molecular physiology of nerve terminals will reveal a wide variety of Ca-activated pathways responsible for producing these diverse processes.

The effects of the Le Fort I osteotomy on the periodontium

Two age-matched populations of equal size (n = 40), one having orthodontic therapy and the other combined orthodontic therapy and orthognathic surgery, were evaluated for their periodontal status 1 to 10 years posttherapy. The parameters investigated were plaque index, gingival index, tooth mobility, width of keratinized tissue, probing depth, gingival recession, and attachment level. No significant differences were found (P less than .05). Within the surgery group, patients with maxillary osteotomies segmentalized between the central incisors (n = 11) and between the canines and second premolars (n = 12) were evaluated using the same parameters and compared with their nonsegmental counterparts. No significant differences were found for patients with osteotomies segmentalized between the central incisors. However, a statistically significant increase in probe depth and loss of attachment level of up to 0.3 mm was found at the sites of osteotomies segmentalized between the canine and second premolar (P less than .05). This difference was not considered clinically significant.

Role of residual calcium in synaptic depression and posttetanic potentiation: fast and slow calcium signaling in nerve terminals

Trains of action potentials evoked rises in presynaptic Ca2+ concentration ([Ca2+]i) at the squid giant synapse. These increases in [Ca2+]i were spatially nonuniform during the trains, but rapidly equilibrated after the trains and slowly declined over hundreds of seconds. The trains also elicited synaptic depression and augmentation, both of which developed during stimulation and declined within a few seconds afterward. Microinjection of the Ca2+ buffer EGTA into presynaptic terminals had no effect on transmitter release or synaptic depression. However, EGTA injection effectively blocked both the persistent Ca2+ signals and augmentation. These results suggest that transmitter release is triggered by a large, brief, and sharply localized rise in [Ca2+]i, while augmentation is produced by a smaller, slower, and more diffuse rise in [Ca2+]i.

Nicotinic cholinergic modulation of voltage-dependent calcium current in bovine adrenal chromaffin cells

1. The effects of cholinergic agonists on voltage-dependent calcium current (ICa) were studied in cultured chromaffin cells from bovine adrenal medulla. 2. Application of both acetylcholine (ACh) and nicotine resulted in inward nicotinic current from a holding potential of -90 mV, and at the same time reversible decreases in depolarization-activated ICa. Both of these effects were blocked by d-tubocurarine, while atropine pre-treatment was ineffective. 3. Internal accumulation of neither Na+ nor Ca2+ seems likely to explain the nicotinic-agonist-dependent decrease in ICa, as the modulation was observed with symmetrical Na+ solutions, with Ca2(+)-free Ba2(+)-containing external solutions, from holding potentials of both -90 and -40 mV, and when the internal Ca2+ buffer capacity was increased. 4. Isodihydrohistrionicotoxin, an open-channel blocker which does not compete for the agonist binding site, completely inhibited inward cholinergic currents while the agonist-dependent decrease in ICa was seen in only two of fifteen cells. 5. The nicotinic agonist-mediated decreases in ICa were not voltage-dependent. 6. No changes in voltage-dependent INa were seen with the nicotinic agonists. 7. Muscarine, with or without GTP in the pipette solution, produced neither modulation of ICa nor any changes in steady holding currents. The nicotinic current and the reversible decrease in ICa induced by ACh and nicotine were not affected by including GTP, or the guanine nucleotide analogues GDP-beta-S and GTP-gamma-S, in the pipette solution. 8. A 10 min pre-incubation of the cells in a high-K+ solution optimal for catecholamine secretion did not affect the nicotinic agonist-mediated decreases in ICa.

The blocking effects of omega-conotoxin on Ca current in bovine chromaffin cells

The effects of omega-conotoxin (omega-CgTX) on voltage-sensitive Ca currents (ICa) were studied in cultured bovine adrenal chromaffin cells. A maximal block of ICa of 40-50% was obtained with omega-CgTX in the microM range, and was independent of the holding potential. The onset of block was both concentration- and time-dependent. In bovine chromaffin cells, Ca channels, both sensitive and insensitive to omega-CgTX, appear to be present.