Solid-state fermentation in an earthen vessel: Trichoderma viride spore-based biopesticide production using corn cobs

The present study reports the production of Trichoderma viride spores in an earthen vessel using corn cobs. Using 4 kg of corn cobs, spore-based biopesticide was produced after 21 d with a maximum spore count of 2.50 × 109 spores/g of substrate and a moisture reduction from 70.80% w/v to 8.10% w/v. The gas chromatography-mass spectrometry analysis of its ethyl acetate extract revealed that it had 20 secondary metabolites, of which 13 were known to be antimicrobial, one was plant growth-promoting, and one performed both functions. Dried extract dissolved in methanol showed the minimum fungicidal concentration of 5-10 mg/ml against Rhizoctonia solani on potato dextrose agar plate. Plate assays and pot experiments on Rhizoctonia solani-infected potato plants exhibited good antifungal and plant growth-promoting activities. The biopesticide showed 71.28% viability over 10 m of storage in the same earthen vessel at 30 ± 2 °C. Thus, a simple, robust technology was developed with good potential for farm deployment.

Effect of chemical pretreatment on quality attributes of the cashew apple

Cashew apples, tropical pseudo fruit, are rich in bioactive compounds. It is still underutilized due to its high perishability and its astringent flavor. This study aims to extend its shelf life by chemical dip and dry method at the rural level. Inhibition of fruit-spoiling enzymes, such as polyphenol oxidase (PPO), peroxidase (POD), amylase, and cellulase, was a significant response in this method. Enzyme inhibition was carried out using chemicals: NaCl (1-10 mM), CaCl₂ (1-10 mM), and ethylenediamine tetraacetic acid (0.1-1 mM). The effect of chemical concentration and dipping time was studied using a full factorial method at three levels (-1, 0, and 1). The dipping time ranged from 60 to 180 min, and chemical concentrations from 1 to 10 mM were studied. Optimal treatment conditions were obtained as follows: NaCl concentration of 9.45 mM, dipping time of 160 min, and CaCl₂ concentration of 7.8 mM, dipping time of 160 min. NaCl pretreatment showed maximum inhibition of PPO (>80%) and POD (>80%), whereas CaCl₂ pretreatment showed maximum inhibition of amylase (60.58%) and cellulase (80.23%). Hence, to avoid postharvest losses, pretreatment with NaCl and CaCl₂ was adequate to preserve the texture and color of cashew apples. PRACTICAL APPLICATION: Chemical pretreatment can prevent the postharvest losses of cashew apples. Inhibition of PPO, POD, amylase, and cellulase is vital in the shelf-life extension of cashew apples. Sodium chloride dip is a cost-effective method for increasing the storability of cashew apples.

Serum catalytic iron and progression of chronic kidney disease: findings from the ICKD study

BACKGROUND

The non-transferrin bound catalytic iron moiety catalyses production of toxic reactive oxygen species and is associated with adverse outcomes. We hypothesized that serum catalytic iron (SCI) is associated with progression of chronic kidney disease (CKD).

METHODS

Baseline samples of the Indian Chronic Kidney Disease participants with at least one follow up visit were tested for total iron, iron binding capacity, transferrin saturation, SCI, ferritin and hepcidin. SCI was measured using the bleomycin-detectable iron assay that detects biologically active iron. Association with the incidence of major kidney endpoints, (MAKE, a composite of kidney death, kidney failure or > 40% loss of eGFR) was examined using Cox proportional hazards model adjusted for sex and age.

RESULTS

2002 subjects (49.9 ± 11.6 years, 68.1% males, baseline eGFR 41.01 ml/min/1.73m2) were enrolled. After a median follow up of 12.6 (12.2, 16.7) months, the composite MAKE occurred in 280 (14%). After adjusting for age and sex, increase from 25th to 75th percentile in SCI, transferrin saturation, ferritin and hepcidin were associated with 78% (43-122%), 34% (10-62%), 57% (24-100%) and 74% (35-124%) increase in hazard of MAKE, respectively. SCI was associated with MAKE and kidney failure after adjustment for occupational exposure, hypertension, diabetes, tobacco, alcohol use, history of AKI, baseline eGFR, uACR, and allowing baseline hazard to vary by centre.

CONCLUSIONS

SCI is strongly and independently associated with composite MAKE in patients with mild to moderate CKD. Confirmation in other studies will allow consideration of SCI as a risk marker and treatment target.

Iron, Hepcidin, and Death in Human AKI

BACKGROUND

Iron is a key mediator of AKI in animal models, but data on circulating iron parameters in human AKI are limited.

METHODS

We examined results from the ARF Trial Network study to assess the association of plasma catalytic iron, total iron, transferrin, ferritin, free hemoglobin, and hepcidin with 60-day mortality. Participants included critically ill patients with AKI requiring RRT who were enrolled in the study.

RESULTS

Of the 807 study participants, 409 (51%) died by day 60. In both unadjusted and multivariable adjusted models, higher plasma concentrations of catalytic iron were associated with a significantly greater risk of death, as were lower concentrations of hepcidin. After adjusting for other factors, patients with catalytic iron levels in the highest quintile versus the lowest quintile had a 4.06-fold increased risk of death, and patients with hepcidin levels in the lowest quintile versus the highest quintile of hepcidin had a 3.87-fold increased risk of death. These findings were consistent across multiple subgroups. Other iron markers were also associated with death, but the magnitude of the association was greatest for catalytic iron and hepcidin. Higher plasma concentrations of catalytic iron and lower concentrations of hepcidin are each independently associated with mortality in critically ill patients with AKI requiring RRT.

CONCLUSIONS

These findings suggest that plasma concentrations of catalytic iron and hepcidin may be useful prognostic markers in patients with AKI. Studies are needed to determine whether strategies to reduce catalytic iron or increase hepcidin might be beneficial in this patient population.

In silico assessment data of allergenicity and cross-reactivity of NP24 epitopes from Solanum lycopersicum (Tomato) fruit

This paper describes data on allergies caused by food (vegetable) and their negative impact on the nutritional balance of the human body. Allergic responses to vegetables such as tomatoes, capsicum and spinach are next to fish, eggs and nuts. Epitopes such as NP24 (allergens) are one of the salt-induced allergenic proteins found in the thaumatin-like protein (TLP) family. The mechanism of allergenicity of TLP found in Solanum lycopersicum (Tomato) fruit is poorly studied. Here we demonstrated allergenicity conferred by the NP24 protein found in Tomato. The data on the cross-reactivity of NP24 protein was generated using Allergen Online and Allermatch tools. Tomato allergenic protein epitope shows a significant identity of with allergens reported in Capsicum, Olive, Kiwi, Tobacco and Banana allergens. Hence, the datasets of sequences, comparative analysis and homology epitope mapping over three dimensional (3D) structures revealed that NP24 has higher cross-reactivity to Capsicum and Tobacco proteins. Thus, this data probably act as limelight for planning wet lab experiments.

Retort process modelling for Indian traditional foods

Indian traditional staple and snack food is typically a heterogeneous recipe that incorporates varieties of vegetables, lentils and other ingredients. Modelling the retorting process of multilayer pouch packed Indian food was achieved using lumped-parameter approach. A unified model is proposed to estimate cold point temperature. Initial process conditions, retort temperature and % solid content were the significantly affecting independent variables. A model was developed using combination of vegetable solids and water, which was then validated using four traditional Indian vegetarian products: Pulav (steamed rice with vegetables), Sambar (south Indian style curry containing mixed vegetables and lentils), Gajar Halawa (carrot based sweet product) and Upama (wheat based snack product). The predicted and experimental values of temperature profile matched with ±10 % error which is a good match considering the food was a multi component system. Thus the model will be useful as a tool to reduce number of trials required to optimize retorting of various Indian traditional vegetarian foods.

Plasma catalytic iron, AKI, and death among critically ill patients

BACKGROUND AND OBJECTIVES

Catalytic iron has been hypothesized to be a key mediator of AKI. However, the association between plasma catalytic iron levels and AKI has not been well studied in humans.

DESIGN, SETTINGS, PARTICIPANTS, & MEASUREMENTS

A single-center, prospective, nonconsecutive cohort study of 121 critically ill patients admitted to intensive care units (ICUs) between 2008 and 2012 was performed. Plasma catalytic iron, free hemoglobin, and other iron markers were measured on ICU days 1 and 4. The primary end point was in-hospital mortality or AKI requiring RRT. Secondary end points included mortality (assessed during hospitalization, at 30 days, and 1 year) and incident AKI, defined by modified Kidney Disease Improving Global Outcomes criteria.

RESULTS

ICU day 1 plasma catalytic iron levels were higher among patients who reached the primary end point (median, 0.74 µmol/l [interquartile range, 0.31-3.65] versus 0.29 µmol/l [0.22-0.46]; P<0.01). ICU day 1 plasma catalytic iron levels were associated with number of packed red blood cell transfusions before ICU arrival (rs=0.29; P<0.001) and plasma free hemoglobin levels on ICU day 1 (rs=0.32; P<0.001). Plasma catalytic iron levels on ICU day 1 were significantly associated with in-hospital mortality or AKI requiring RRT, even after adjusting for age, enrollment eGFR, and number of packed red blood cell transfusions before ICU arrival (13 events; adjusted odds ratio per 1-SD higher ln[catalytic iron], 3.33; 95% confidence interval, 1.79 to 6.20). ICU day 1 plasma catalytic iron levels were also significantly associated with incident AKI, RRT, hospital mortality, and 30-day mortality.

CONCLUSIONS

Among critically ill patients, elevated plasma catalytic iron levels on arrival to the ICU are associated with a greater risk of incident AKI, RRT, and hospital mortality.

Serum catalytic Iron: A novel biomarker for coronary artery disease in patients on maintenance hemodialysis

Cardiovascular disease is the leading cause of morbidity and mortality in maintenance hemodialysis (MHD) patients. We evaluated the role of serum catalytic iron (SCI) as a biomarker for coronary artery disease (CAD) in patients on MHD. SCI was measured in 59 stable MHD patients. All patients underwent coronary angiography. Significant CAD was defined as a > 70% narrowing in at least one epicardial coronary artery. Levels of SCI were compared with a group of healthy controls. Significant CAD was detected in 22 (37.3%) patients, with one vessel disease in 14 (63.63%) and multi-vessel disease in eight (36.36%) patients. The MHD patients had elevated levels of SCI (4.70 ± 1.79 μmol/L) compared with normal health survey participants (0.11 ± 0.01 μmol/L) (P < 0.0001). MHD patients who had no CAD had SCI levels of 1.36 ± 0.34 μmol/L compared with those having significant CAD (8.92 ± 4.12 μmol/L) (P < 0.0001). Patients on MHD and diabetes had stronger correlation between SCI and prevalence of CAD compared with non-diabetics. Patients having one vessel disease had SCI of 8.85 ± 4.67 μmol/L versus multi-vessel disease with SCI of 9.05 ± 8.34 μmol/L, P = 0.48. In multivariate analysis, SCI and diabetes mellitus were independently associated with significant CAD. We confirm the high prevalence of significant CAD in MHD patients. Elevated SCI levels are associated with presence of significant coronary disease in such patients. The association of SCI is higher in diabetic versus the non-diabetic subgroup. This is an important potentially modifiable biomarker of CAD in MHD patients.

Biocalcification using B. pasteurii for strengthening brick masonry civil engineering structures

Microbiologically induced calcite precipitation in bricks by bacterium Bacillus pasteurii (NCIM 2477) using a media especially optimized for urease production (OptU) was demonstrated in this study. Effect of biocalcification activity on compressive strength and water absorption capacity of bricks was investigated. Various other parameters such as pH, growth profile, urease activity, urea breakdown and calcite precipitated were monitored during the 28 days curing period. Efficiency of B. pasteurii to form microbial aided calcite precipitate in OptU media resulted into 83.9% increase in strength of the bricks as compared to only 24.9% with standard media, nutrient broth (NB). In addition to significant increase in the compressive strength, bricks treated with B. pasteurii grown in OptU media resulted in 48.9 % reduction in water absorption capacity as compared to control bricks immersed in tap water. Thus it was successfully demonstrated that microbial calcification in optimized media by Bacillus pasteurii has good potential for commercial application to improve the life span of structures constructed with bricks, particularly structures of heritage importance.

Impact of catalytic iron on mortality in patients with acute coronary syndrome exposed to iodinated radiocontrast-The Iscom Study

BACKGROUND

Catalytic iron (CI) mediates vascular injury by generating reactive oxygen species. We evaluated role of CI in predicting mortality in patients with acute coronary syndrome (ACS) and studied association of contrast nephropathy with CI levels.

METHODS

We investigated 806 patients with ACS undergoing contrast exposure for a cardiac procedure who were followed up for 30 days.

RESULTS

Overall mortality was 1.6% at 30 days. Catalytic iron at baseline predicted mortality with CI levels significantly higher in those who died, 0.45 μmol/L (0.37, 0.68) compared with survivors 0.31 μmol/L (0.21, 0.40); P = .004. Catalytic iron was associated with increased risk of death in the highest quartile compared with lower 3 quartiles (hazard ratio 7.88, P = .001) after adjustment for age, diabetes, ST deviation, Killip class, ejection fraction, baseline creatinine, hemoglobin level, and troponin. Fifty-five patients (6.8%) developed contrast nephropathy. Patients with contrast nephropathy had a 27% increase in median CI levels from baseline up to 48 hours compared with a marginal 2.9% increase in those without contrast nephropathy (0.37, 0.14 μmol/L to 0.47, 0.20 μmol/L versus 0.35, 0.12 μmol/L to 0.36, 0.14 μmol/L, P < .0001). Patients with contrast nephropathy had significantly higher mortality compared with those without contrast nephropathy (9.1% vs 1.1%, P = .001).

CONCLUSION

High baseline CI levels predicted mortality in patients with ACS. Occurrence of contrast nephropathy was associated with rise in CI levels and higher mortality. Therapeutic options to buffer or chelate CI may have beneficial effects on mortality in this setting.

Prognostic evaluation of catalytic iron in patients with acute coronary syndromes

BACKGROUND

The potential of iron to generate reactive oxygen species has motivated a long-standing interest in whether excess iron is causally linked to atherosclerotic heart disease. Circulating catalytic iron ("free" iron) is that which is not bound to transferrin or ferritin and is available to generate reactive oxygen species that may have deleterious vascular effects.

HYPOTHESIS

We hypothesized that increased levels of catalytic iron would be associated with increased cardiovascular events.

METHODS

We investigated the association of catalytic iron with clinical outcomes in 1701 patients with unstable angina, non-ST-segment elevation myocardial infarction (MI), or ST-segment elevation MI who were followed for a median of 10 months. All endpoints were adjudicated by a blinded Clinical End Points Committee.

RESULTS

The median catalytic iron level was significantly higher in those who died, 0.45 µmol/L (0.37, 0.57), compared with survivors, 0.37µmol/L (0.31, 0.46; P = 0.016). Catalytic iron was associated with a stepwise increased risk of death, with the highest quartile at an almost 4-fold risk compared with baseline (hazard ratio: 3.94, P = 0.035), which persisted after adjustment for age, diabetes, prior MI, prior congestive heart failure, ST-segment deviation, creatinine clearance, B-type natriuretic peptide, smoking, and Killip class (adjusted hazard ratio: 3.97, P = 0.036). There was no association between catalytic iron and risk of MI, recurrent ischemia, heart failure, or bleeding.

CONCLUSIONS

Increasing catalytic iron levels were associated with increased all-cause mortality. Although our findings suggest that catalytic iron is not likely to add to available tools as a routine biomarker for risk stratification of recurrent ischemic events, its association with mortality is intriguing and leaves open the question of whether cardiovascular therapeutics aimed at catalytic iron may be useful. The TIMI Study Group has received research grant support from the Muljibhai Patel Society for Research in Nephro-Urology.

Association of catalytic iron with cardiovascular disease

The ability of iron to cycle reversibly between its ferrous and ferric oxidation states is essential for the biological functions of iron but may contribute to vascular injury through the generation of powerful oxidant species. We examined the association between chemical forms of iron that can participate in redox cycling, often referred to as "catalytic" or "labile" iron, and cardiovascular disease (CVD). In our cross-sectional study of 496 participants, 85 had CVD. Serum catalytic iron was measured using the bleomycin-detectable iron assay that detects biologically active iron. The odds of existing CVD for subjects in the upper third of catalytic iron were 10 times that of subjects with lower catalytic iron in unadjusted analyses. The association was decreased by 1/2 by age adjustment, but little additional attenuation occurred after adjusting for age, Framingham Risk Score, estimated glomerular filtration rate, hypertension status, high-density lipoprotein cholesterol, and systolic blood pressure, with the association remaining strong and significant (odds ratio 3.8, 95% confidence interval 1.4 to 10.1). In conclusion, we provide preliminary evidence for a strong detrimental association between high serum catalytic iron and CVD even after adjusting for several co-morbid conditions; however, broader prospective studies are needed to confirm these findings, which would support therapeutic trials to assess the beneficial effects of iron chelators on CVD.

Percutaneous endovascular management of recurrent aneurysm of transplant renal artery anastomosed to internal iliac artery

Aneurysm formation constitutes 0.5 to 1% of all vascular complications in transplant patients. Aneurysms may result from infection, injury during procurement or preservation, faulty suture technique or trauma. Transplant renal artery aneurysm presents with hypertension, graft dysfunction and bleeding. We report a case of percutaneous covered stent-graft for recurrent aneurysm with stenosis of transplant renal artery. To our knowledge this is the first report of successful treatment of transplant renal artery aneurysm with covered stent-graft.

Modeling of chromium (VI) biosorption by immobilized Spirulina platensis in packed column

This study describes biosorption of chromium (VI) by immobilized Spirulina platensis, in calcium alginate beads. Three aspects viz. optimization of bead parameters, equilibrium conditions and packed column operation were studied and subsequently modeled. Under optimized bead diameter (2.6mm), calcium alginate concentration (2%, w/v) and biomass loading (2.6%, w/v) maximum biosorption was achieved. 140 g l(-1) loading of optimized beads resulted in 99% adsorption of chromium (VI) ions from an aqueous solution containing 100 mg l(-1) of chromium (VI). The quantitative chromium (VI) uptake was effectively described by Freundlich adsorption isotherm. The immobilized S. platensis beads were further used in a packed bed column wherein the effects of bed height, feed flow rate, inlet chromium (VI) ion concentration were studied by assessing breakthrough time. The performance data were tested for various models fitting in order to predict scale up-design parameters such as breakthrough time and column height. Results were encouraging.

Simultaneous removal of carbon and nitrate in an airlift bioreactor

This paper presents the integrated removal of carbon (measured as chemical oxygen demand i.e. COD) and NO(x)-N by sequentially adapted sludge, studied in an airlift reactor (ALR). Simultaneous removal of COD and nitrate occurs by denitrification (anoxic) and oxidation (aerobic). Aerobic (riser) and anoxic (remaining part) conditions prevail in different parts of the reactor. Studies were carried out in a 42 L ALR operated at low aeration rate to maintain anoxic and aerobic conditions as required for denitrification and COD removal, respectively. The sludge was adapted sequentially to increasing levels of NO(x)-N and COD over a period of 45 days. Nitrate removal efficiency of the sludge increased due to adaptation and degraded 900 ppm NO(3)-N completely in 2h (initially the sludge could not degrade 100 ppm NO(3)-N). The performance of the adapted sludge was tested for the degradation of synthetic waste with COD/N loadings in the range of 4-10. The reduction of COD was significantly faster in the presence of NO(x)-N and was attributed to the availability of oxygen from NO(x)-N and distinct conditions in the reactor. This hypothesis was justified by the material balance of COD.

A statistical approach to optimization of fermentative production of poly(gamma-glutamic acid) from Bacillus licheniformis NCIM 2324

This paper reports on the optimization of poly(gamma-glutamic acid) (PGA) production by Bacillus licheniformis NCIM 2324 using a statistical approach. One-factor-at-a-time method was used to investigate the effect of carbon sources, nitrogen sources and pH on PGA production. Plackett-Burman design was adopted to select the most important nutrients influencing the yield of PGA. After identifying effective nutrients, response surface methodology was used to develop a mathematical model to identify the optimum concentrations of the key nutrients for higher PGA production, and confirm its validity experimentally. PGA production increased significantly from 5.27 to 26.12 g/l when the strain was cultivated in the optimal medium developed by using statistical approach, as compared to basal medium.

Culture Conditions stimulating high γ-Linolenic Acid accumulation by Spirulina platensis

Gamma-linolenic acid (GLA) production by Spirulina platensis under different stress-inducing conditions was studied. Submerged culture studies showed that low temperature (25°C), strong light intensity (6 klux) and primrose oil supplement (0.8%w/v) induced 13.2 mg/g, 14.6 mg/g and 13.5 mg linolenic acid per gram dry cell weight respectively. A careful observation of fatty acid profile of the cyanobacteria shows that, oleic acid and linoleic acid, in experiments with varying growth temperature and oil supplements respectively, helped in accumulating excess γ-linolenic acid. In addition, cultures grown at increasing light regimes maintained the γ-linolenic acid to the total fatty acid ratio(GLA/TFA) constant, despite any change in γ-linolenic acid content of the cyanobacteria.

Kinetic and equilibrium modeling of chromium (VI) biosorption on fresh and spent Spirulina platensis/Chlorella vulgaris biomass

Biosorption of chromium (VI) was studied using both fresh and spent algal biomass of Spirulina platensis and Chlorella vulgaris. Both showed comparable behavior suggesting that biosorption is primarily a surface phenomenon. Biosorption rate was very fast during the first five minutes, in which almost 50% of the chromium (VI) was adsorbed. Two step kinetic model was proposed for biosorption. Equilibrium data obeyed Freundlich and Langmuir adsorption isotherms. Fresh algal biomass of S. platensis gave maximum of 73.6% biosorption of chromium (VI) in 100 ppm solution at 1 g l(-1) cell loading. For improved economics, beta-carotene was extracted from S. platensis and the spent biomass was used for chromium (VI) biosorption. The maximum biosorption by spent biomass was increased to 86.2%. Thus, this two step process not only showed improved efficiency in biosorption ( approximately 17% increase) but also gave valuable byproduct, namely beta-carotene.

Denitrification of highly alkaline nitrate waste using adapted sludge

Uranium extraction and regeneration of ion exchange resin generates concentrated nitrate effluents (typically 500 to 10,000 ppm NO(3)-N) that are highly alkaline in nature (pH 9.0 to 11.0). It is difficult to remove nitrate from such solutions using standard physiochemical and biological methods. This paper reports denitrification of such wastes using preadapted sludge (biomass), which was acclimatized to different influent pH (7.5 to 11.5) in a sequencing batch reactor (4 l) for 2 months. Performance of the developed consortia was studied under different pH (7.5 to 12). Biomass denitrified the synthetic wastewater containing 1,694 ppm NO(3)-N at a pH of 10.5. Decrease in nitrite build up was observed at higher pH, which differs from the reported results. Kinetic analysis of the data showed that specific rate of nitrate reduction was highest (78 mg NO(3)-N/g MLSS/h) at higher pH (10.5). This was attributed to the acclimatization process. Thus, high-strength nitrate wastewater, which was highly alkaline, was successfully treated using preadapted sludge.

Solid-state fermentation for enhanced production of laccase using indigenously isolated Ganoderma sp

Laccase production by solid-state fermentation (SSF) using an indigenously isolated white rot basidiomycete Ganoderma sp. was studied. Among the various agricultural wastes tested, wheat bran was found to be the best substrate for laccase production. Solid-state fermentation parameters such as optimum substrate, initial moisture content, and inoculum size were optimized using the one-factor-at-a-time method. A maximum laccase yield of 2,400 U/g dry substrate (U/gds) was obtained using wheat bran as substrate with 70% initial moisture content at 25 degrees C and the seven agar plugs as the inoculum. Further enhancement in laccase production was achieved by supplementing the solid-state medium with additional carbon and nitrogen source such as starch and yeast extract. This medium was optimized by response surface methodology, and a fourfold increase in laccase activity (10,050 U/g dry substrate) was achieved. Thus, the indigenous isolate seems to be a potential laccase producer using SSF. The process also promises economic utilization and value addition of agro-residues.

Application of response surface methodology to cell immobilization for the production of palatinose

Response surface methodology (RSM), based on multivariate non-linear model, was applied to study the interactions and optimization of the immobilization parameters for cell entrapment, namely alginate concentration, cell loading and bead diameter using Erwinia rhapontici NCPPB 1578 that produced palatinose. ANOVA analysis and statistical parameters calculations showed that RSM could be used effectively to model and improve a complex system like cell immobilization. Palatinose yield was increased by 40%. The maximum yield of 140 mg/ml was achieved in a batch of 1h at alginate concentration of 5% w/v, cell loading of 5 g l(-1) and 2.25 mm bead diameter. Thus, the E. rhapontici NCPPB 1578 immobilization in alginate bead and subsequent palatinose yield was successfully improved by application of RSM technique.

Biological denitrification of high strength nitrate waste using preadapted denitrifying sludge

Denitrification of synthetic high nitrate waste containing 9032 ppm NO(3)-N (40,000 ppm NO(3)) in a time period of only 6h has been achieved in our previous study using activated sludge. The activated sludge culture was acclimatized by a stepwise increase in the nitrate concentration of synthetic waste. In the present work, studies were carried out on the changing microbial population of the sludge and the physiology of nitrate metabolism during the various stages of adaptation process to high strength synthetic nitrate waste. During the course of adaptation, with an increase in the nitrate concentration, a sharp increase in the number of denitrifiers was found with an equally rapid decrease in the nitrifying community. Two key enzymes involved in the first two steps of the denitrification process were also studied during this period. The results of the study suggest that specific enzyme levels increase as the activated sludge adapts itself to higher nitrate concentrations. Biological denitrification of high nitrate waste is a slow process and to increase the rate of denitrification, parameters such as pH, temperature, C:N and biomass concentration of the process were optimized using orthogonal array method. Optimized conditions increased the specific nitrate reduction rate by 54% and specific nitrite reduction rate by 45%.

Synthetic dye decolorization by white rot fungus, Ganoderma sp. WR-1

Decolorization of recalcitrant dyes by an indigenous strain of white rot fungus isolated from bark of dead tree, WR-1 identified as Ganoderma sp. was investigated. The fermentation medium was optimized using a combination of one factor at a time and orthogonal array method. Maximum decolorization (96%) of 100 ppm amaranth was achieved in 8 h with optimized medium containing 2% starch and 0.125% yeast extract. Rate of dye decolorization by the indigenous isolate Ganoderma sp. WR-1 was very high compared to the most widely used strains of Trametes versicolor and Phanerochaete chrysosporium. The broad-spectrum decolorization efficiency of the isolate was assessed using chemically different dyes. The isolate was further evaluated for the decolorization of industrial effluent. Complete decolorization was achieved in 12 days.

Denitrification of high strength nitrate waste

The aim of the present work was to study the treatment of high strength nitrate waste (40000 ppm NO(3) i.e., 9032 ppm NO(3)-N) by acclimatizing sludge initially capable of degrading dilute streams (100-200 ppm NO(3)-N). Sludge from an effluent treatment plant of a fertilizer industry was acclimatized for 15 d each at 1694, 3388, 6774 and 9032 ppm NO(3)-N in a 4 L sequencing batch reactor. Complete denitrification of extremely concentrated nitrate waste (9032 ppm NO(3)-N) using acclimatized sludge was achieved in just 6 h. During the acclimatization period, increase in nitrite peak value from zero to 5907 ppm NO(2)-N was observed, as the concentration was increased from 1694 to 9032 ppm NO(3)-N. Kinetic analysis of the nitrate and nitrite profile could reasonably support microbiological explanations for nitrite build up and changes in sludge composition.

Use of a batch-stirred reactor to rationally tailor biocatalytic polytransesterification

Despite favorable thermodynamics, high-molecular weight and low-dispersity polyesters are difficult to synthesize biocatalytically in organic solvents. We have reported previously that the elimination of solvent can improve the kinetics and apparent equilibrium significantly (Chaudhary et al., 1997a). We now present the design and use of a batch-stirred enzyme reactor to control the biocatalytic polymerization. Using the reactor, polyester having a molecular weight of 23,400 Da and a polydispersity of 1.69 was synthesized in only 1 h at 60 degrees C. Additional factors like enzyme-deactivation kinetics, enzyme specificity, and initial exothermicity were investigated to develop a better understanding of this complex reaction system.

Diastolic ventricular interaction in chronic heart failure

BACKGROUND

Diastolic ventricular interaction describes a situation in which the volume of one ventricle is directly influenced by the volume of the other ventricle. Such interaction is normally negligible, but it is accentuated in circumstances associated with pulmonary hypertension and volume overload. When this interaction occurs, acute volume unloading results in a reduction in right ventricular end-diastolic volume, as expected, but left ventricular end-diastolic volume paradoxically increases. Since chronic heart failure is a volume-overloaded state associated with pulmonary hypertension, we hypothesised that this interaction may be clinically important in patients with heart failure.

METHODS

A radionuclide technique incorporating cardiac scintigraphy was used to measure the effect of acute volume unloading, achieved by 30 mm Hg lower-body suction, on right and left ventricular end-diastolic volumes in 21 patients with chronic heart failure and 12 healthy individuals (controls).

FINDINGS

In nine heart-failure patients, there was a paradoxical increase in left ventricular end-diastolic volume in association with an expected decrease in right ventricular end-diastolic volume during lower-body suction. This response was not seen in the control group. The mean change in left ventricular end-diastolic volume differed significantly between the heart-failure patients and controls (6 [SD 19] vs -19 [12] mL, p = 0.0003). However, the change in right ventricular end-diastolic volume was similar in the two groups (-18 [11] vs -20 [8]%. p = 0.70). Patients who increased left ventricular end-diastolic volume during lower-body suction had higher resting pulmonary arterial and pulmonary capillary wedge pressures than the remaining heart-failure patients.

INTERPRETATION

The response of nine patients in our study suggests diastolic ventricular interaction, which we believe could be common in patients with chronic heart failure. This finding is relevant to their management, since it emphasises the importance of venodilator therapy. The relation between stroke volume and left ventricular end-diastolic volume, by the Frank-Starting law of the heart, may explain why some patients with chronic heart failure paradoxically increase stroke volume when pulmonary capillary wedge pressure is lowered with vasodilators.

Demonstration of late cardiotoxicity following bone marrow transplantation by assessment of exercise diastolic filling characteristics

We evaluated the role of rest and exercise left ventricular diastolic filling parameters as a marker of cardiotoxicity in 25 consecutive patients 1 year following BMT. Ten age- and sex-matched subjects served as controls. Patients were evaluated in toto and in three sub-groups according to chemotherapy. Left ventricular ejection fraction (EF), peak filling rate (PFR) and time to peak filling (TTPF) were assessed at rest and at peak exercise. EF and PFR were similar at rest and at peak exercise in patients and controls. TTPF was significantly prolonged at rest in patients compared to controls (200 +/- 65 vs 131 +/- 26 ms, P = 0.003) and at peak exercise was markedly longer in patients (142 +/- 40 vs 54 +/- 19 ms, P < 0.001). Sub-group analysis demonstrated abnormal resting TTPF in those patients who had received either combination anthracycline and CY or anthracycline and melphalan, while those patients who received CY alone had normal resting TTPF. However, exercise TTPF was abnormally prolonged in all patient groups. While all controls demonstrated a normal decrease in TTPF during exercise, four of the 25 patients had a paradoxical increase in TTPF during exercise. Exercise diastolic function may provide evidence of cardiotoxicity in long-term survivors of BMT.

Determinants of exercise capacity in patients with coronary artery disease and mild to moderate systolic dysfunction. Role of heart rate and diastolic filling abnormalities

BACKGROUND

To test the hypothesis that diastolic filling abnormalities are an important cause of exercise limitation in some patients with coronary artery disease we assessed the factors limiting exercise capacity in a group of patients with coronary artery disease in whom exercise limitation was greater than expected from the degree of resting left ventricular systolic dysfunction.

METHODS AND RESULTS

We assessed the relationship between exercise capacity (maximal oxygen consumption) during erect cycle ergometry, heart rate, radionuclide indices of left ventricular systolic function (ejection fraction) and diastolic filling (peak filling rate, and time to peak filling) during semi-erect cycle ergometry in 20 patients (15 male, five female) who were aged 42-72 years (mean 61 years) and had angiographically proven coronary artery disease and evidence of reversible myocardial ischaemia on thallium scintigraphy. All patients exhibited marked exercise limitation (maximal oxygen consumption 8.7- 22.4 ml.min-1.kg-1--mean 15.9 ml.kg-1.min-1, which was 61.1 +/- 16% of age and gender predicted maximum) due to breathlessness or fatigue rather than angina, in spite of a mean ejection fraction for the group of 46.5% (range 30-67%). We also compared the diastolic filling characteristics of these patients during exercise with 10 healthy controls (age 38-66, mean 58 years; eight male, two female). Comparing diastolic filling characteristics, peak filling rate was higher and time to peak filling shorter both at rest and at peak exercise in controls than patients (peak filling rate 3.1 +/- 0.5 vs 2.2 +/- 0.9 EDV.s-1, P = 0.01 at rest and 8.3 +/- 0.8 vs 5.2 +/- 1.9 EDV.s-1, P < 0.0001 on exercise; time to peak filling 115.2 +/- 29.8 vs 228.9 +/- 71.7 ms, P < 0.0001 at rest and 52.8 +/- 16.2 vs 139.6 +/- 44.8 ms, P < 0.0001 on exercise respectively). On univariate analysis in the patients studied, maximal oxygen consumption was correlated with peak heart rate (r = 0.45 P = 0.04), peak exercise time to peak filling (r = -0.85 P < 0.0001), peak exercise peak filling time rate (r = 0.51 P = 0.019), and the relative increase in cardiac output i.e. cardiac output peak/cardiac output rest (r = 0.58, P = 0.008). There was no correlation between maximal oxygen consumption and resting indices of diastolic filling (peak filling rate and time to peak filling) or with resting or peak exercise ejection fraction. On multiple regression analysis, only peak exercise time to peak filling was significantly related to maximal oxygen consumption.

CONCLUSION

We have observed a strong correlation between exercise capacity and indices of exercise left ventricular diastolic filling, and have confirmed previous studies showing a poor correlation with resting and exercise indices of systolic function and resting diastolic filling, in patients with coronary artery disease.

Exercise capacity in hypertrophic cardiomyopathy. Role of stroke volume limitation, heart rate, and diastolic filling characteristics

BACKGROUND

We previously showed that exercise capacity in patients with hypertrophic cardiomyopathy (HCM) is related to peak exercise cardiac output. Cardiac output augmentation during exercise is normally dependent on heart rate (HR) response and stroke volume (SV) augmentation by increased left ventricular end-diastolic volume and/or increased contractility. We hypothesized that in contrast to normal subjects, peak exercise capacity in patients with HCM is determined by the diastolic filling characteristics of the left ventricle during exercise, which would in turn determine the degree to which SV is augmented, and that HR is a relatively unimportant determinant of peak exercise capacity.

METHODS AND RESULTS

Twenty-three patients with HCM underwent invasive hemodynamic evaluation and measurement of maximal oxygen consumption (VO2max) during erect treadmill exercise to assess the relative importance of changes in HR and SV in determining exercise capacity. Hemodynamic responses to erect and supine exercise were compared in 10 of these patients. In a separate group of 46 patients with HCM, the relation between VO2max and exercise diastolic filling indexes was assessed. Peak HR during erect exercise was 92 +/- 8% of predicted maximum. VO2max was 29.0 +/- 6.4 mL.kg-1.min-1 and was related significantly to peak exercise cardiac index and SV index (r = .71, P < .001 and r = .66, P = .001, respectively) but not to peak HR, HR deficit, or resting or peak pulmonary capillary wedge pressure. Peak cardiac output during erect exercise was not related to peak HR (r = .13, P = NS). When erect and supine exercise were compared, peak HR was lower in the supine position (153.3 +/- 19.9 beats per minute supine versus 172.0 +/- 17.6 beats per minute erect, P = .003), but peak exercise cardiac index was similar (7.9 +/- 2.6 L.min-1.m-2 supine versus 7.5 +/- 2.8 L.min-1.m-2 erect). Pulmonary capillary wedge pressure was higher at rest in the supine versus erect position (15.3 +/- 5.2 versus 8.1 +/- 6.1 mm Hg) but was not significantly higher at peak exercise in the supine versus erect position (28.5 +/- 8 versus 22.4 +/- 11.6 mm Hg erect, P = NS). In the separate group of 46 patients with HCM, VO2max was significantly inversely related to time to peak filling at peak exercise (r = -.60, P < .0001) but did not correlate with time to peak filling at rest, resting ejection fraction, peak filling rate, or peak exercise peak filling rate.

CONCLUSIONS

SV is the major determinant of peak exercise capacity in the erect position in patients with hypertrophic cardiomyopathy. This in turn is determined by the exercise left ventricular diastolic filling characteristics. HR augmentation does not appear to be a major determinant of peak cardiac output in the erect position.

Abnormal forearm vascular responses during dynamic leg exercise in patients with vasovagal syncope

BACKGROUND

We have reported previously that in some patients with normal hearts who present with exercise syncope, abnormal forearm vasodilation is seen during leg exercise and tilt table tests are positive. This suggests that exercise syncope may be a variant of vasovagal syncope. In this study we tested the hypothesis that there is loss of the normal forearm vasoconstrictor response during dynamic leg exercise in an unselected population of patients with classic vasovagal syncope.

METHODS AND RESULTS

We evaluated forearm vascular responses during maximal semierect cycle exercise in 28 consecutive patients with vasovagal syncope and compared them with 30 age-matched control subjects. We also evaluated blood pressure responses during erect treadmill exercise (Bruce protocol). While forearm vascular resistance at rest was similar in the patients with vasovagal syncope and the control group, forearm vascular resistance was markedly lower in the patients than in control subjects at peak exercise (85 +/- 54 versus 149 +/- 94 units, P = .002). Forearm vascular resistance fell by 3 +/- 48% during exercise in patients versus an increase of 135 +/- 103% in control subjects (P < .0001). Systolic blood pressure during erect exercise was lower in patients versus control subjects (155 +/- 32 versus 188 +/- 17 mm Hg, P < .0001). Six of the vasovagal patients complained of exercise syncope or presyncope on specific inquiry, and 4 of these 6 exhibited exercise hypotension during erect treadmill exercise testing.

CONCLUSIONS

Patients with vasovagal syncope exhibit a failure of the normal vasoconstrictor response in the forearm during dynamic leg exercise. Exercise syncope and presyncope are not uncommon in unselected patients with classic vasovagal syncope, as is exercise hypotension.

Mechanism of exercise hypotension in patients with ischemic heart disease. Role of neurocardiogenically mediated vasodilation

BACKGROUND

Exercise-induced hypotension in patients with coronary artery disease (CAD) has been considered to be due to an inability to achieve an adequate increase in cardiac output to match the demands of exercise. We investigated 10 consecutive patients (9 men and 1 woman; age, 38 to 71 years; mean, 52 years) with angiographically documented CAD and exercise-induced hypotension (EIH) (BPPeak < BPRest). Ten approximately age- and sex-matched patients with documented CAD and normal exercise blood pressure response (NBP) served as control subjects.

METHODS AND RESULTS

Nine patients with EIH and all 10 control subjects underwent forearm plethysmography and radionuclide ventriculography (RNV) during semierect cycle exercise. Forearm vascular resistance (FVR) fell by 35 +/- 21% in exercise-induced hypotension patients versus an increase of 78 +/- 65% in patients with an NBP response (P < .0001). Left ventricular ejection fraction increased by 5.1 +/- 7.5% in the group with EIH versus a fall of 4.1 +/- 6.2% in the control group (P = .004). Cardiac output at peak exercise (RNV) increased by 2.2 +/- 0.89-fold in the group with EIH versus 1.49 +/- 0.47-fold in the control group (P = .04). The tenth patient in the group with EIH underwent invasive hemodynamic evaluation during erect exercise. Systolic blood pressure fell (136/80Rest to 50/40Peak) and cardiac output (Fick) tripled, whereas calculated systemic vascular resistance decreased by a factor of 10. Successful angioplasty to an isolated circumflex lesion resulted in resolution of symptoms and abnormal hemodynamic responses during exercise.

CONCLUSIONS

Abnormal vasodilation associated with a normal or even increased rather than decreased cardiac output response appears to be an important mechanism underlying EIH in some patients with CAD. In the present study, this appears to have been the dominant mechanism in 8 and contributory in 2 of the consecutive patients studied.