Sunlight-triggered prebiotic nanomotors for inhibition and elimination of pathogen and biofilm in aquatic environment

Pathogen contamination in drinking water sources causes waterborne infectious diseases, seriously threatening human health. Nowadays, stimuli-responsive self-propelled nanomotors are appealing therapeutic agents for antibacterial therapy in vivo. However, achieving water disinfection using these nanobots is still a great challenge. Herein, we report on prebiotic galactooligosaccharide-based nanomotors for sunlight-regulated water disinfection. The nanomotors can utilize galactooligosaccharide-based N-nitrosamines as sunlight-responsive fuels for the spontaneous production of antibacterial nitric oxide. Such a solar-to-chemical energy conversion would power the nanomotors for self-diffusiophoresis, which could promote the diffusion of the nanomotors in water and their penetration in the biofilm, significantly enhancing the inhibition and elimination of the pathogens and their biofilms in aquatic environments. After water treatments, the prebiotic-based residual disinfectants can be selectively utilized by beneficial bacteria to effectively relieve safety risks to the environment and human health. The low-energy-cost, green and potent antibacterial nanobots show promising potential in water disinfection.

Fabrication and characterization of microporous soft templated photoactive 3D materials for water disinfection in batch and continuous flow

Water cleaning can be provided in batch mode or in continuous flow. For the latter, some kind of framework must withhold the cleaning agents from washout. Porous structures provide an ideal ratio of surface to volume for optimal access of the water to active sites and are able to facilitate rapid and efficient fluid transport to maintain a constant flow. When functionalized with suitable photoactive agents, they could be used in solar photocatalytic disinfection. In this study, we have used the sugar cube method to fabricate PDMS-based materials that contain three different classes of photosensitizers that differ in absorption wavelength and intensity, charge as well as in ability to generate singlet oxygen. The obtained sponges are characterized by scanning electron microscopy and digital microscopy. Archimede's method was used to measure porosity and density. We show that the materials can absorb visible light and generate Reactive Oxygen Species (ROS) that are required to kill bacteria. The disinfection ability was tested by examining how irradiation time and operation mode (batch vs. flow) contribute to the performance of the material. The current strategy is highly adaptable to other (medium) pressure-driven flow systems and holds promising potential for various applications, including continuous flow photoreactions.

Non-regulated haloaromatic water disinfection byproducts act as endocrine and lipid disrupters in human placental cells

The disinfection of drinking water generates hundreds of disinfection byproducts (DBPs), including haloaromatic DBPs. These haloaromatic DBPs are suspected to be more toxic than haloaliphatic ones, and they are currently not regulated. This work investigates their toxicity and ability to interfere with estrogen synthesis in human placental JEG-3 cells, and their genotoxic potential in human alveolar A549 cells. Among the haloaromatic DBPs studied, halobenzoquinones (2,6-dichloro-1,4-benzoquinone (DCBQ) and 2,6-dibromo-1,4-benzoquinone (DBBQ)) showed the highest cytotoxicity (EC50: 18-26 μg/mL). They induced the generation of very high levels of reactive oxygen species (ROS) and up-regulated the expression of genes involved in estrogen synthesis (cyp19a1, hsd17b1). Increased ROS was linked to significant depletion of polyunsaturated lipid species from inner cell membranes. The other DBPs tested showed low or no significant cytotoxicity (EC50 ≥ 100 μg/mL), while 2,4,6-trichloro-phenol (TCP), 2,4,6-tribromo-phenol (TBP) and 3,5-dibromo-4-hydroxybenzaldehyde (DCHB) induced the formation of micronuclei at concentrations much higher than those typically found in water (100 μg/mL). This study reveals the different modes of action of haloaromatic DBPs, and highlights the toxic potential of halobenzoquinones, which had a significant impact on the expression of placenta steroid metabolism related genes and induce oxidative stress, implying potential adverse health effects.

N-dealkylation of amines during water disinfection - Revealing a new direction in the formation of disinfection by-products

Among numerous disinfection by-products (DBP) forming during aqueous chlorination nitrogen containing species are of special concern due to their toxicological properties. Nevertheless, corresponding reaction products of these natural and anthropogenic compounds are not sufficiently studied so far. An interesting reaction involves dealkylation of the substituted amine moiety. Here we present the results of the comparative study of one-electron oxidation and aqueous chlorination of several aliphatic and aromatic amines. The reaction products were reliably identified with gas chromatography - high resolution mass spectrometry (GC-HRMS), high pressure liquid chromatography - electrospray ionization high resolution mass spectrometry HPLC-ESI/HRMS), and electrochemistry - electrospray ionization high resolution mass spectrometry (EC-ESI/HRMS). Certain similarities dealing with the formation of the corresponding aldehydes and substitution of alkyl groups at the nitrogen atom for hydrogen were shown for the studied processes. The mechanism of the substituted amines' aqueous chlorination involving one-electron oxidation is proposed and confirmed by the array of the observed reaction products. Alternative reactions taking place in conditions of aqueous chlorination, i.e. aromatic electrophilic substitution, may successfully compete with dealkylation and produce major products.

ZnO-NPs/AC composite antibacterial agents with N-halamine glycinate functionalized silica-mesoporous silica coating for water disinfection

This work deals with the synthesis, structural characterization and applications of N-halamine glycinate functionalized silica-mesoporous silica coated ZnO-NPs/AC composite for water disinfection. Several nanocomposite materials were obtained: ZnO-NPs/AC, ZnO-NPs/AC@SiO2, ZnO-NPs/AC@SiO2@mSiO2, ZnO-NPs@SiO2@mSiO2-Gly and ZnO-NPs@SiO2@mSiO2-N-halamine-Gly. These nanocomposite materials were fully characterized via different physiochemical techniques including: FTIR, TGA, XPS, XRD, SEM, TEM and BET. XRD indicated a predominance of crystalline pattern of ZnO-NPs impregnated into activated carbon (AC) and their silica and m-mesoporous silica coating precursors. The FTIR spectra confirmed an immense combination between ZnO-NPs and AC of ZnO-NPs/AC nanocomposite as well as its interactions with coated silica precursors. SEM, TEM images illustrated that the fabricated ZnO-NPs/AC nanocomposites are well coated with silica-mesoporous silica functionalized N-halamine. The distinctive surface area has decreased from 800 m2/g for pristine AC to 772 m2/g for ZnO-NPs/AC and to 282 m2/g for ZnO-NPs/AC@SiO2 and to 139 m2/g for ZnO-NPs/AC@SiO2@mSiO2 and to 15.4 m2/g for ZnO-NPs@SiO2@mSiO2-N-Gly. All those nanocomposites showed good efficacy against all four bacterial species, with higher inhibition zones for the 2 g-positive bacteria than that of the 2 g-negative ones. The ZnO@SiO2@mSiO2-N-halamine-Gly exhibited the high zone inhibition against all tested bacteria except for E. Coli.

Emerging contaminants in the water environment: Disinfection-induced viable but non-culturable waterborne pathogens

Disinfection is essential for the control of waterborne pathogens (WPs), especially during the COVID-19 pandemic. WP can enter the viable but non-culturable (VBNC) state to evade disinfection, seriously threatening water safety. VBNC WPs should be considered as an emerging contaminant to ensure a higher level of safety of the water environment. Here, this study systematically reviewed the water disinfection methods that could induce WPs into the VBNC state, and clarified the risks of different species of VBNC WPs in the relevant water environment. The physicochemical and physiological properties of VBNC cells (e.g., morphology, physiology, and resuscitation potential) were then evaluated to better understand their potential health risks. In addition, the dominant detection methods of VBNC WPs were discussed, and real-time and label-free technologies were recommended for the study of VBNC WPs in the aquatic environment. The possible mechanisms of formation and persistence at the genetic level were highlighted. It concluded that the VBNC state has a deeper level of dormancy than the persistent state, which is associated with the general stress response and stringent response systems, and its persistence is also associated with the active efflux of harmful substances. Finally, the current shortcomings and research perspectives of VBNC bacteria were summarized. This review provides new insights into the characteristics, detection methods, persistence mechanisms, and potential health risks of VBNC WPs induced by water disinfection processes, and also serves as a basis for microbial risk control in the aquatic environment.

Solar/periodate inhibits ARGs transformation by degradation of DNA without damaging cell membrane

Antibiotic-resistant bacterial infections are a growing global threat to public health. Chlorine-based water disinfection and some advanced oxidation processes significantly increase the risk of ARGs release and transmission in the aquatic environment. Therefore, it is critical to develop or optimize disinfection methods to reduce the conversion and transmission of ARGs in natural water. This study investigated whether the solar/periodate (PI) system inhibited the natural transmission of ARGs and its mechanism. The results showed that solar/PI systems could effectively inhibit the propagation of ARGs in two simulated natural transformation systems, up to more than 100 times. By characterizing the cellular process of bacteria treated by the solar/PI system, we found that the solar/PI system could directly cause damage to DNA bases and its dual effect with almost no damage to the bacterial cell membrane, which was the main reason why this technology could inhibit natural transformation processes. Specifically, the inhibition effect of solar/PI on bacteria did not result in enhanced membrane permeability under appropriate PI dosage (<200 μM), which greatly reduced the risk of secondary contamination of eARGs released by traditional disinfection. Our findings could help improve existing disinfection strategies to ensure that antibiotic resistance is not spread in the natural water environment.

Investigation of baffle configurations on the water disinfection efficiency using ultraviolet C light-emitting diodes

AbstractIn this study, the effect of baffle configuration on the water disinfection efficiency of a planar photoreactor equipped with ultraviolet C light-emitting diodes (UV-C LEDs) was investigated. The results indicated that the configuration of the baffles influenced the hydrodynamics inside the flow channel and thus affected the microbial trajectory, and exposure time. Accordingly, a modified serpentine configuration was developed to enhance the UV light exposure of microbes in water and improve the reactor performance for microbial inactivation. According to the simulation results, the quarter-circle baffles used in the modified serpentine configuration increased the microbial path length along the flow channel. However, because the cross-sectional area of the flow channel decreased, this configuration increased the water velocity. A modified serpentine configuration with a baffle radius of 5 mm achieved the longest microbial exposure time and highest inactivation value for Escherichia coli. At a water flow rate of 160  mL/min, this configuration achieved a UV fluence of 15.2 mJ/cm2 and an inactivation value of 3.8 log, which were approximately 22% and 0.4 log higher than those obtained with the traditional serpentine configuration, respectively. In addition, the maximum water flow rate at which the UV reactor achieved an inactivation value of 4.0 log was 154  mL/min at a baffle radius of 5 mm. This flow rate was 11.5% higher than that obtained with the traditional serpentine configuration. These close agreements between the experimental and simulation results confirmed the strong capability of the proposed modified serpentine configuration to improve reactor performance.

Novel photoelectrochemical 3D-system for water disinfection by deposition of modified carbon nitride on vitreous carbon foam

Graphitic carbon nitride (GCN) is an optical semiconductor with excellent photoactivity under visible light irradiation. It has been widely applied for organic micropollutant removal from contaminated water, and less investigated for microorganisms' inactivation. The photocatalytic degradation mechanism using GCN is attributed to a series of reactions with reactive oxygen species and photogenerated holes that can be boosted by modifying its physical-chemical structure. This work reports a successful improvement of the overall photocatalytic and electrocatalytic activities of the pristine material by thermal and chemical modification by a copolymerisation synthesis method. The copolymerisation of dicyandiamide as a precursor with barbituric acid strongly reduced photoluminescence due to the enhanced charge separation thus improving the catalyst efficiency under visible light irradiation. The material with 1.6 wt% of barbituric acid showed the best photocatalytic performance and electrochemical properties. This photocatalyst was selected for immobilisation on a conductive carbon foam, which promotes a higher electrochemical active surface area and enhanced mass transfer. This three-dimensional metal-free electrode was employed for the photoelectrochemical inactivation of two different microorganisms, Escherichia coli, and Enterococcus faecalis, obtaining removals below the detection limit after 30 min in simulated faecal-contaminated waters. This photoelectrochemical reactor was also applied to treat polluted river and urban waste waters, and the faecal contamination indicators were vastly reduced to values below the detection limit in 60 min in both cases, showing the wide applicability of this innovative photoelectrode for different types of polluted aqueous matrices.

Biocidal activity of multifunctional cuprite-doped anion exchanger - Influence of bacteria type and medium composition

The study presents unconventional, bifunctional, heterogeneous antimicrobial agents - Cu2O-loaded anion exchangers. The synergetic effect of a cuprous oxide deposit and polymeric support with trimethyl ammonium groups was studied against the reference strains of Enterococcus faecalis ATCC 29212 and Pseudomonas aeruginosa ATCC 27853. Biological testing (minimum bactericidal concentration, MBC), time- and dose-dependent bactericidal effect (under different conditions - medium composition and static/dynamic culture) demonstrated promising antimicrobial activity and confirmed its multimode character. The standard values of MBC, for all studied hybrid polymers and bacteria, were similar (64-128 mg/mL). However, depending on the medium conditions, due to the copper release into the bulk solution, bacteria were actively killed even at much lower doses of the hybrid polymer (25 mg/mL) and low Cu(II) concentrations in solution (0.01 mg/L). Simultaneously, confocal microscopic studies confirmed the effective inhibition of bacterial adhesion and biofilm formation on their surface. The studies conducted under different conditions showed also the influence of the structure and physical properties of studied materials on the biocidal efficacy and an antimicrobial action mechanism was proposed that could be significantly affected by electrostatic interactions and copper release to the solution. Although the antibacterial activity was also dependent on various strategies of bacterial cell resistance to heavy metals present in the aqueous medium, the studied hybrid polymers are versatile and efficient biocidal agents against bacteria of both types, Gram-positive and Gram-negative. Therefore, they can be a convenient alternative for point-of-use water disinfection systems providing water quality in medical devices such as dental units, spa equipment, and aesthetic devices used in the cosmetic sector.

Microbial inactivation kinetics of UV LEDs and effect of operating conditions: A methodological critical analysis

Tiny ultraviolet (UV) light-emitting diodes (LED)s that are replacing the conventional energy-intensive mercury UV lamps have gained interest since the early 2000's because of their promising advantages. In the context of microbial inactivation (MI) of waterborne microbes, disinfection kinetics of those LEDs exhibited variations among studies, in terms of varying the UV wavelength, the exposure time, power, and dose (UV fluence) as well as other operational conditions. While reported results may appear contradictory when examined separately, they probably are not when analyzed collectively. As such, in this study, we carry out a quantitative collective regression analysis of the reported data to shed light on the kinetics of MI by the emerging UV LEDs technology alongside the effects of varying operational conditions. The main goal is to identify dose response requirements for UV LEDs and to compare them to traditional UV lamps in addition to ascertaining optimal settings that could help in achieving the optimal inactivation outcome for comparable UV doses. The analysis showed that kinetically, UV LEDs are as effective as conventional mercury lamps for water disinfection, and at times more effective, especially for UV resistant microbes. We defined the maximal efficiency at two wavelengths, 260-265 nm and 280 nm, among a wide range of available LED wavelengths. We also defined the UV fluence per log inactivation of tested microbes. At the operational level, we identified existing gaps and developed a framework for a comprehensive analysis program for future needs.

Energy efficient portable air cathode electrochlorinator for point-of-use disinfection of toilet wastewater

Active chlorine is the most widely used disinfectant for water disinfection as well as surface sterilization. Here, we report an air cathode electrochlorinator for point-of-use disinfection of toilet wastewater. The air cathode dominated by a four-electron pathway to reduce O₂ to OH^- was more suitable for chlorine synthesis than through a two-electron pathway to H₂O₂, which could reduce chlorine back to chloride ions. The minimum driving potential of the air cathode electrochlorinator was as low as 0.94 V, which made it possible to be directly powered by a piece of commercial mini photovoltaic solar panel without electronic converter. Under the cell voltage of 2 V, the Faraday current efficiency was 82.0 % and the electrical energy required to produce 1 kg active chlorine was estimated to be only 1.75 kWh. The normalized energy consumption to disinfect simulated toilet wastewater with a pathogen concentration of 10⁷ CFU/mL was estimated to be 7.2 W h/m³. Moreover, the material cost for fabrication of the electrochlorinator was estimated to be less than $ 0.62. These features guarantee the air cathode electrochlorinator of high potential for point-of-use disinfection of toilet wastewater.

Calcium alginate gels-functionalized polyurethane foam decorated with silver nanoparticles as an antibacterial agent for point-of-use water disinfection

This paper reports the preparation of calcium alginate gels-functionalized PUF decorated with AgNPs (CA/PUF@Ag) by in situ reduction of Ag⁺ ions to form AgNPs with weakly reducing glycerol in CA/PUF composite. The water-adsorbing capacity, chemical structure, crystalline nature, elemental composition and morphologies of the composite were characterized. The Ag release behavior of CA/PUF@Ag was investigated. The inhibition zone test, time-dependent co-culture assay, test tube test, and antibacterial filtration experiment with Escherichia coli as an indicator of bacterial contamination were conducted to explore the antimicrobial efficacy. Results indicated that the CA/PUF@Ag prepared at 0.25 % w/v of SA could absorb more water with a higher swelling ratio of 8.0 g/g than that of PUF@Ag (6.0 g/g), which was subsequently squeezed by minimal pressure stimuli. The CA/PUF@Ag had a larger initial AgNPs loading amount (8.48 mg/g), lower Ag release concentration (44.35 μg/L) and lower Ag release rate (0.27 %) after 14 days tests than those of PUF@Ag (7.93 mg/g, 80.87 μg/L and 0.60 % respectively). The CA/PUF@Ag was highly reusable because bacterial cells in the squeezed water recovered from the composite were completely inactivated over five cycles of operation, and exhibited good antibacterial efficacy as an antibacterial filter in a flow test.

Application of electric field treatment (EFT) for microbial control in water and liquid food

Water disinfection and food pasteurization are critical to reducing waterborne and foodborne diseases, which have been a pressing public health issue globally. Electrified treatment processes are emerging and have become promising alternatives due to the low cost of electricity, independence of chemicals, and low potential to form by-products. Electric field treatment (EFT) is a physical pathogen inactivation approach, which damages cell membrane by irreversible electroporation. EFT has been studied for both water disinfection and food pasteurization. However, no study has systematically connected the two fields with an up-to-date review. In this article, we first provide a comprehensive background of microbial control in water and food, followed by the introduction of EFT. Subsequently, we summarize the recent EFT studies for pathogen inactivation from three aspects, the processing parameters, its efficacy against different pathogens, and the impact of liquid properties on the inactivation performance. We also review the development of novel configurations and materials for EFT devices to address the current challenges of EFT. This review introduces EFT from an engineering perspective and may serve as a bridge to connect the field of environmental engineering and food science.

Escherichia coli inactivation in water by sulfate radical-based oxidation process using FeCl3-activated biochar/persulfate system

Pathogenic microbes in water present great risks to environments, water resources, and human health. In the present study, for the first time, a FeCl₃-activated bermudagrass-derived biochar (FA-BC) was applied to activate persulfate (PS) for E. coli inactivation. The PS activation was ascribed to the presence of Fe⁰ and Fe₃O₄ on the surface of FA-BC, and SO₄^·- radicals were proved to be the main role for E. coli inactivation using FA-BC activated PS system (FA-BC/PS). Decreasing the pH (5-9) and increasing the PS concentration (50-300 mg/L), reaction temperature (20-50 °C), and FA-BC dosage (100-500 mg/L) resulted in the enhancement of disinfection efficiency of E. coli using FA-BC/PS. 6.21 log reductions of E. coli were achieved within 20 min under the optimal conditions (500 mg/L FA-BC, 200 mg/L PS, pH 7, and 20 °C with 10⁷ CFU/mL E. coli in DI water). The FA-BC/PS effectively eliminated various initial concentrations of E. coli (10⁵-10⁸ CFU/mL). The E. coli inactivation rate decreased from 0.1426 min^-1 to 0.0883, 0.1268 min^-1, and 0.1093 min^-1 with the presence of 10 mg/L humic acid, 100 mg/L Cl^-, and 100 mg/L HCO₃^-, respectively. In addition, after three cycles of disinfection tests using FA-BC/PS, the E. coli inactivation rate only slightly decreased from 0.1426 to 0.1288 min^-1. The FA-BC/PS also effectively removed the E. coli in real stormwater with a 99.2 % inactivation efficiency within 180 min. The FA-BC/PS in fixed-bed column tests revealed the continuous and high inactivation of E. coli in water. Increasing the FA-BC amount (1.5 %-5 %) and PS concentration (50-200 mg/L) and decreasing the flow rate (2-4 mL/min) caused the lower E. coli concentration in effluent. Therefore, the FA-BC/PS can be considered as a promising and efficient technique for water disinfection.

Evaluation of disinfection efficacy of single UV-C, and UV-A followed by UV-C LED irradiation on Escherichia coli, B. spizizenii and MS2 bacteriophage, in water

Ultraviolet light-emitting diodes (UV LEDs) have shown ability to inactivate microorganisms and viruses in water. The unique characteristic of the UV-LEDs' diversity in wavelengths ranging from UV-C, UV-B, and UV-A, allows for wavelengths to be combined in different manners for polychromatic irradiation. Previous studies reported no synergy from simultaneous or sequential UV-C and UV-B as well as UV-C or UV-B followed by UV-A irradiation. However, synergy was reported for UV-A followed by UV-C or UV-B irradiation on various microorganisms. Nevertheless, no clear ground has been reached on whether to adopt single UV-C wavelengths or UV-A followed by UV-C LED, irradiation on inactivation of microorganisms and viruses in water. Therefore, this work evaluates the disinfection efficacy of single UV-C as well as UV-A followed by UV-C LED irradiation on Escherichia coli, Bacillus spizizenii spores and MS2 bacteriophage in water. The UV-C wavelengths were represented by 267 and 278 nm UV LEDs, and UV-A by 368 nm UV LEDs. In this study, E. coli was highly susceptible to UV radiation followed by B. spizizenii spores, and lastly MS2. Repair following UV inactivation was only observed in E. coli. The synergistic effect found in both E. coli, and B. spizizenii spores was attributed to the different inactivation mechanisms of the UV-C and UV-A wavelengths. In both single UV-C, and UV-A followed by UV-C LED irradiations, single 267 nm UV-C LED showed higher inactivation efficacy. Meanwhile, single 278 nm UV-C LED showed higher efficacy in terms of suppression of repair, and electrical energy consumption. Using single UV-C LEDs in a water disinfection system cuts down on related extra costs by avoiding combined wavelengths while still attaining better levels of microorganism inactivation, repair suppression and electrical energy consumption. These findings are applicable for the design and implementation of UV LED water disinfection systems.

Continuous inactivation of human adenoviruses in water by a novel g-C3N4/WO3/biochar memory photocatalyst under light-dark cycles

Viruses transmitted by water have raised considerable concerns for public health. A novel memory photocatalyst of g-C₃N₄/WO₃/biochar was successfully developed for effective inactivation of human adenoviruses (HAdVs) in water, in which WO₃ as an electron-storage reservoir and biochar as an electron shuttle is employed to synergistically improve photocatalytic activity of g-C₃N₄. The tertiary composite exhibited continuous photocatalytic performance for HAdVs inactivation without regrowth in water under light-dark cycles, i.e., ∼3.9-log inactivation under 6-h visible light irradiation and an additional ∼1.1-log inactivation under the following 6-h dark. The enhanced virucidal mechanism was attributed to the heterojunction formation and especially the electron-transfer pathway switching via biochar incorporation, contributing to electron transfer and storage in the light phase and then electron release in the dark phase, along with obviously increased generation of the virus-killing •OH radicals under light-dark cycles.

Drinking water chlorination in dairy beef fattening bulls: water quality, potential hazards, apparent total tract digestibility, and growth performance

The first study aimed to evaluate the effect of drinking water disinfection (chlorination: NaClO 15%) and conditioning (acidification: H₃PO₄ diluted 1:5 in water) on water quality, water and feed consumption, apparent total tract digestibility, and its potential hazardous effects on Holstein bulls fed high-concentrate diets. Twenty-four animals (221 ± 20.9 kg of BW, and 184 ± 9.9 days of age) were individually assigned to one of four treatments according to a 2 × 2 factorial arrangement: conditioning (with or without acidification) and disinfection (with or without chlorination). The entire study lasted 210 days. Physicochemical and microbiological water quality, water and feed consumption, haematological and biochemical blood parameters, and apparent total tract digestibility were measured; data were analysed via a mixed-effects model. Chlorination and acidification increased (P = 0.02) free residual chlorine in water, and chlorination reduced (P = 0.01) total coliform and Clostridium perfringens counts in water. Treatment did not affect water consumption, total DM intake, or blood parameters. At the beginning of the study, NDF digestibility decreased (P = 0.04) with acidification, however, this was restored at the end of the study. The second study evaluated the potential benefit of drinking water chlorination and acidification on the performance of crossbred Holstein bulls fed high-concentrate diets under commercial conditions. Ninety-six animals (322 ± 35.0 kg of BW, and 220 ± 14.2 days of age) were allocated into six pens assigned to one of the two treatments: untreated drinking water or drinking water treated with chlorination and acidification for a total of 112 days. Physicochemical and microbiological water quality, water and concentrate consumption, eating behaviour, growth performance, and carcass quality were analysed via a mixed-effects model. Water conditioning and disinfection increased (P = 0.01) free residual chlorine concentration and reduced (P = 0.04) total coliform count in water. Although water consumption and eating behaviour were similar between treatments, water conditioning and disinfection increased average daily weight gain (P = 0.03), BW before slaughter (P = 0.01), and hot carcass weight (P = 0.01). In conclusion, drinking water chlorination and acidification in fattening dairy beef bulls is recommended as it improves growth performance without any detrimental side effects on health or nutrient digestibility.

Advanced photocatalytic sterilization for recalcitrant Enterococcus sp. contaminated water by newly developed Z-scheme Bi2WO6 based composites under solar light

Pathogenic contamination is one of the major causes of clean water shortage, which poses great risk to human health. Herein, g-C₃N₄ (CN) was firstly introduced to Ag/Ag₂O/BiPO₄/Bi₂WO₆ (Ag/P/BWO) to construct a novel Z-scheme composite CN-Ag/P/BWO for disinfecting Enterococcus sp. contaminated water. CN-Ag/P/BWO showed excellent disinfection performance toward recalcitrant Enterococcus sp. under simulated solar light irradiation, achieving complete inactivation of 1.5 × 10⁷ cfu mL^-1 of bacterial cells only within 60 min, which was mainly attributed to the improved light absorption ability, charge carries separation/transfer efficiency and surface wettability. Additionally, the disinfection mechanism of CN-Ag/P/BWO toward Enterococcus sp. was systematically investigated. Photogenerated active species h⁺, ·OH and ·O₂^- worked together and played crucial roles in photocatalytic inactivation. The antioxidant system enabled Enterococcus sp. self-protection ability at the beginning of disinfection through secreting more antioxidant enzymes. However, with accumulation of active species, bacterial cell membrane and energy system were damaged, which further led to leakage of intracellular components and decomposition of bacteria. Besides, CN-Ag/P/BWO exhibited high practicability for different environmental factors and also performed well for real lake water disinfection. The high stability further confirmed its practicability for water disinfection. This work not only systematically revealed the disinfection mechanism toward Enterococcus sp., but also provided an efficient method for water disinfection.

Inactivation of Giardia intestinalis cysts in water using a sonochemical method based on mid-high-frequency waves

Giardia intestinalis is a pollutant of food and water, resistant to conventional disinfection treatments and its elimination requires effective methods action. Herein, mid-high-frequency ultrasound (375 kHz), which produces HO• and H₂O₂, was used as an alternative method of treatment to inactivate Giardia intestinalis cysts in water. The effect of ultrasound power (4.0, 11.2, 24.4 W) on the sonogeneration of radicals was tested, showing that 24.4 W was the condition most favorable to treat the parasite. The viability of the protozoan cysts was evaluated using the immunofluorescence technique and vital stains, showing this protocol was useful to quantify the parasite. The sonochemical method (at 375 kHz and 24.4 W) was applied at different treatment times (10, 20, and 40 min). A significant decrease in the protozoan concentration (reduction of 52.4% of viable cysts) was observed after 20 min of treatment. However, the extension of treatment time up to 40 min did not increase the inactivation. Disinfecting action was associated with attacks on the Giardia intestinalis cyst by sonogenerated HO• and H₂O₂ (which may induce structural damage, even the cell lysis). For future work is recommended to test combinations with UVC or Fenton process to enhance the inactivating action of this method.•Mid-high-frequency ultrasound produces HO• and H₂O₂ profitable to inactivate Giardia intestinalis.•Immunofluorescence technique and vital stains allowed us to quantify the parasite viability.•Giardia intestinalis cysts concentration decreased by 52.4% after only 20 min of sonication.

Chlorination for low-cost household water disinfection - A critical review and status in three Latin American countries

Chlorination has historically provided microbiologically safe drinking water in public water supplies. Likewise, chlorine has also been introduced as a low-cost disinfection method in rural and marginalized communities, both at community and household level, as well as during emergencies. Although this practice is common and well established for use as a household water treatment technology in the Global South, several challenges in effective and efficient implementation still need to be addressed. Here, we explored these issues by a literature review and narrowed them to the status of three Latin American countries (Mexico, Colombia, and Brazil). Overall, it was found that although guidance on household-based chlorination includes information on health risks and hygiene, this may not create enough incentive for the user to adapt the method satisfactorily. Physicochemical quality of the water influences chlorination efficiency and it is found that variations in quality are rarely considered when recommending chlorine doses during implementation. These are far more often based on a few measurements of turbidity, thereby not considering dissolved organic matter, or seasonal and day-to-day variations. Other factors such as user preferences, chlorine product quality and availability also represent potential barriers to the sustainable use of chlorination. For chlorination to become a sustainable household water treatment, more focus should therefore be given to local conditions prior to the intervention, as well as support and maintenance of behavioural changes during and after the intervention.

A sequential utilization of the UV-A (365 nm) fluence rate for disinfection of water, contaminated with Legionella pneumophila and Legionelladumoffii

Legionella species are the etiological agent of Legionnaires' disease, a pathology easily contracted from water circuits and by the inhalation of aerosol droplets. This bacterium mainly proliferates in water: Legionella pneumophila is the most commonly isolated specie in water environments and consequently in water system, although further Legionella species have frequently been isolated, including Legionella dumoffii. The simultaneous presence of the two species in the water system can therefore lead to the simultaneous infection of several people, giving rise to harmful outbreaks. Ultraviolet inactivation of waterborne microorganisms offers a rapid and effective treatment technique and recently is getting more attention mostly to eliminate unsafe level of contamination. To tackle the issue, the inactivation of the two species of Legionella spp., namely L. pneumophila and L. dumoffii, by means of UV-A light emitting diodes (UV-A LED) system is explored. We used a commercially available UV-A LED at 365 nm wavelength, and the UV-A dose is given incrementally to the Legionellae with a concentration of 10⁶ CFU/mL in 0.9% NaCl (aq) solution. In this study, with a UV-A-dose of 1700 mJ/cm², the log-reduction of 3-log (99.9% inactivation) for L. pneumophila and 2.1-log (99.1% inactivation) for L. dumoffii of the contaminated water are achieved. The Electrical Energy per Order (E_EO) is evaluated and showed this system is more economic and efficient in comparison with UV-C and UV-B LEDs. Following the support of this preliminary study with additional tests, aiming to validate the technology, we expect this device may be installed in water plants such as cooling systems or any water purification station in either industrial or home scales to reduce the risk of this infectious disease, preventing consumers' health.

Polyphenol modified natural collagen fibrous network towards sustainable and antibacterial microfiltration membrane for efficient water disinfection

Because of their low-cost and high bacterial interception efficiency, large-scale membrane separation technologies like microfiltration (MF) have been widely implemented for water disinfection. However, lack of antibacterial ability and low sustainability are two major drawbacks of most petroleum-based MF membranes, which are normally associated with hazardous issues including biofouling and nonbiodegradable waste. In this work, abundant animal hides, which are by-products of the meat processing industry, were proposed as raw materials to fabricate a sustainable MF membrane due to their natural, hierarchical, and renewable collagen fibrous network (CFN) with inherent biodegradability. After the removal of non-collagen compositions from animal hides, such as hair and fat, through a facile pretreating process base on green chemistry principles, a thin CFN based membrane (CFN-M) with a similar micropore size to that of commercial MF membranes could be produced. Furthermore, inspired by conventional leather tanning technology, tannic acids (TA) were selected as plant polyphenol tanning agent to modify collagen fibers based on tanning chemistry to improve the thermal stability of CFN-M. Moreover, the TA cross-linked CFN-M (TA@CFN-M) exhibited excellent antibacterial properties due to the production of reactive oxygen species (ROS) by the catechol functional group. The resulting TA@CFN-M achieved >99.9% water disinfection efficiency with a flux of ∼150 L m^-2 h^-1 via gravity-driven operation, while simultaneously showing admirable anti-biofouling ability. Different from the commercial MF membrane, based on the green chemistry principle, this work may shed light on designing new sustainable and antibacterial membranes for anti-biofouling water disinfection.

Facile synthesis of g-C3N4/Ag2C2O4 heterojunction composite membrane with efficient visible light photocatalytic activity for water disinfection

Water pollution, deriving from the contamination of pathogenic bacteria, has posed a threat to human's survival and development. Photocatalytic disinfection is being widely studied in decentralized drink water safety, as traditional disinfection technologies are limited by harmful disinfection by-product and excessive energy consumption. Herein, a novel composite membrane (PN/Ag) with plasmonic heterojunction was synthesized for the efficient photocatalytic disinfection through the combination of polyacrylonitrile (PAN), N-doped carbon dots (NCDs)/g-C₃N₄ and Ag₂C₂O₄ by electrospinning technique and successive ionic layer adsorption and reaction (SILAR) process. The surface plasmon resonance (SPR) effect of Ag nanoparticles and Schottky barrier formation between metal and semiconductor contributed to the efficient separation of electron-hole pairs and the generation of reactive species, resulting in outstanding photocatalytic disinfection of PN/Ag composite membranes (7.48 and 7.70 log inactivation of E. coli and S. aureus respectively in 80 min) and good reusability under visible light illumination. Moreover, the potential Z-scheme photocatalytic mechanisms were proposed for PN/Ag system according to the band structure and reactive species analysis. The as-proposed PN/Ag composite membranes may shed light on the design and application of materials in water purification.

Dual-wavelength light radiation for synergistic water disinfection

Development of the narrow-band mercury-free light sources, such as light emitting diodes (LEDs) and excilamps, has stimulated research on inactivation of pathogenic microorganisms by dual-wavelength light radiation. To date, dual-wavelength light radiation has emerged as an advanced tool for enhancing microbial inactivation in water in view of potential synergistic effect. This is the first review that aims at elucidating its mechanisms under dual-wavelength light exposure and surveying a body of related literature in terms of yes-or-no synergy. We have proposed three key inactivation mechanisms, which function in the estimated spectrum ranges I (190-254 nm), II (250-320 nm) and III (300-405 nm) and provide a synergistic effect when combined. These mechanisms involve proteins damage and DNA repair suppression (I), direct and indirect DNA damage (II) and generation of reactive oxygen species (ROS) by endogenous photosensitizers (III), such as porphyrins and flavins. A synergy under dual-wavelength light irradiation simultaneously or sequentially occurs if coupling two wavelengths of different ranges (I + II, I + III, II + III) in order to trigger different inactivation mechanisms. Recent advances of dual-wavelength light strategy in photodynamic therapy could be applied for water disinfection. They bring opportunities for applying the sources of near-UV and visible radiation and making the disinfection processes more energy- and cost-effective. From this standpoint, the synergistically efficient dual-wavelength combinations II + III and the combinations within the extended to 700 nm range III (near-UV + VIS) appear to be promising for developing novel advanced oxidation processes for disinfection of real turbid waters.

Physically-crosslinked hydroxyethyl cellulose-g-poly (acrylic acid-co-acrylamide)-Fe3+/silver nanoparticles for water disinfection and enhanced adsorption of basic methylene blue dye

In this study, we report the development of physically cross-linked hydroxyethyl cellulose grafted polyacrylic acid-co-polyacrylamide/silver nanocomposite [Ag@HEC-g-P(AA-co-AM)-Fe³⁺] possesses excellent antimicrobial and enhanced MB adsorption. A green in-situ reduction process was used to prepare silver nanoparticles. UV-Vis spectroscopy, TEM, ATR-IR, XRD, SEM-EDS were used to analyze the green produced silver nanoparticles and Ag@HEC-g-P(AA-co-AM)-Fe³⁺. The swelling ratio of Ag@HEC-g-P(AA-co-AM)-Fe³⁺ is dependent on AgNPs content and pH. The swelling kinetics fitted with Pseudo-second order. The cumulative release#% of AgNPs was 29.63 ± 1.7%, respectively up to 10 h and its kinetics obey Korsmeyer-Peppas model. The grafting to HEC and incorporation of AgNPs into HEC-g-P(AA-co-AM)-Fe³⁺ enhances the thermal stabilities and increases total activation energies from 19,122.2 to 66,287.1 KJ mol. Ag@HEC-g-P(AA-co-AM)-Fe³⁺ has powerful antimicrobial activity against Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, Micrococcus leutus, Staphyllococus aureus. The maximum adsorption capacity of MB was 133.38 ± 1.25 mg/g at nanocomposite concentration (300 mg/L), pH (9.0), and MB concentration (5 mg/L). To anticipate the adsorption mechanism, Pseudo-first and second-order models, as well as three isotherm models (Langmuir, Freundlich, and Temkin) were used to model adsorption kinetics. The nonlinear Langmuir models and second-order kinetics were the most appropriate.

A model to predict the kinetics of direct (endogenous) virus inactivation by sunlight at different latitudes and seasons, based on the equivalent monochromatic wavelength approach

Sunlight plays an important role in the inactivation of pathogenic microorganisms such as bacteria and viruses in water. Here we present a model that is able to predict the kinetics of direct virus inactivation (i.e. inactivation triggered by sunlight absorption by the virion, without the role played by photochemically produced reactive intermediates generated by water-dissolved photosensitizers) on a global scale (from 60 °S to 60 °N latitude) and for the different months of the year. The model is based on the equivalent monochromatic wavelength (EMW) approach that was introduced recently, and which largely simplifies complex polychromatic calculations by approximating them with a monochromatic equation at the proper wavelength, the EMW. The EMW equation was initially established for mid-July conditions at a mid-latitude, and was then extended to different seasons and to the latitude belt where the day-night cycle is always observed throughout the year. By so doing, the first-order rate constant of direct virus photoinactivation can be predicted on a global scale, with the use of a relatively simple equation plus tables of pre-calculated input data, as a function of latitude, month, and key water parameters. The model was here applied to the virus organism phiX174, a somatic phage that is often used as proxy for pathogenic viruses undergoing fast direct inactivation, and for which a wide array of published inactivation data is available. Model predictions are validated by comparison with field data of inactivation of somatic phages by sunlight.

Innovative green/non-toxic Bi2S3@g-C3N4 nanosheets for dark antimicrobial activity and photocatalytic depollution: Turnover assessment

Herein, green and non-toxic bismuth sulphide@graphitic carbon nitride (Bi₂S₃@g-C₃N₄) nanosheets (NCs) were firstly synthesized by ultrasonicated-assisted method and characterized with different tool. Bi₂S₃@g-C₃N₄ NCs antimicrobial activity tested against three types of microbes. As well the heterostructured Bi₂S₃@g-C₃N₄ NCs was investigated for removing dye and hexavalent chromium under visible light and showed high efficiency of photocatalytic oxidation/reduction higher than g-C₃N₄ alone, attributing to lower recombination photogenerated electron-hole pairs. Bi₂S₃@g-C₃N₄ NCs showed high antimicrobial efficiencies against Staphylococcus aureus (S. aureus) as a Gram positive bacterium, Escherichia coli (E. Coli)as a Gram negative bacterium and Candida albicans (C. albicans) and that the disinfection rates are 99.97%, 99.98% and 99.92%, respectively. The core mechanism is that the bacterial membrane could be destroyed by reactive oxygen species. The Bi₂S₃@g-C₃N₄ NCs is promising for environmental disinfection including water and public facilities disinfection and solar photocatalytic depollution. Turnover number (TON) and Turnover frequency (TOF) are used as concise assessment indicator for photocatalytic efficiency.

Copper hydroxide nanosheets-assembled nanofibrous membranes for anti-biofouling water disinfection

Copper hydroxide (Cu(OH)₂) has been elected as a newly-emerging green disinfectant to deal with membrane biofouling in the treatment of bacteria-contaminated water; however, the decoration strategy of it with the granular form on membrane substrates limits the practical application. Here a novel surface-confined methodology was proposed for preparing freestanding Cu(OH)₂ nanosheet-assembled nanofibrous membranes (CNNMs) with the anti-biofouling property via the in-suit coprecipitation and heat-induced growth method. The vertically aligned Cu(OH)₂ nanosheets were in-suit rooted on the surface of the nanofiber scaffold with high binding fastness. The acquired CNNMs possess comprehensive performances of high porosity, prominent mechanical strength, fatigue resistance, and superior bactericidal efficiency of 99.999%, which endowed the CNNMs ultrahigh filtration fluxes (24000 L m^-2 h^-1) and durability to disinfect bacteria-containing water effectively. This facile strategy may throw light on manufacturing novel inorganic nanosheet-rooted nanofibrous membranes for water disinfection and public health.

Solar processes and ozonation for fresh-cut wastewater reclamation and reuse: Assessment of chemical, microbiological and chlorosis risks of raw-eaten crops

In this study, a full cycle of agricultural reuse of agro-food wastewater (synthetic fresh-cut wastewater, SFCWW) at pilot plant scale has been investigated. Treated SFCWW by ozonation and two solar processes (H2O2/solar, Fe3+-EDDHA/H2O2/solar) was used to irrigate two raw-eaten crops (lettuce and radish) grown in peat. Two foodborne pathogens (E. coli O157:H7 and Salmonella enteritidis) and five organic microcontaminants (OMCs: atrazine, azoxystrobin, buprofezin, procymidone and terbutryn) were monitored along the whole process. The three studied processes showed a high treatment capability (reaching microbial loads < 7 CFU/100 mL and 21-90 % of OMC reduction), robustness (based on 7 or 10 analysed batches for each treatment process) and high suitability for subsequent treated SFCWW safe reuse: non-phytotoxic towards Lactuca sativa and no bacterial regrowth during its storage for a week. The analysis of the harvested crop samples irrigated with treated SFCWW in all the studied processes showed an absence of microbial contamination (< limit of detection, LOD; i.e., < 1 CFU/99 g of lettuce and < 1 CFU/8 g of radish), a significant reduction of OMC uptake (in the range 40-60 % and > 90 % for solar treated and ozonated SFCWW, respectively) and bioaccumulation in both crops in comparison with the results obtained with untreated SFCWW. Moreover, the chlorophyll content in the harvested lettuces irrigated with SFCWW treated by Fe3+-EDDHA/H2O2/solar was twice than that irrigated with SFCWW treated by H2O2/solar and ozone, indicating the additional advantage of using Fe3+-EDDHA as an iron source to reduce the risk of iron chlorosis in crops. Finally, the chemical (dietary risk assessment for the combined exposure of the 5 OMCs) and quantitative microbiological risk assessment (QMRA) of the harvested crops showed the capability of the studied processes to reduce the risk associated with untreated SFCWW reuse by more than 50 % and more than 4 orders of magnitude, respectively.

Inactivation of Aspergillus species in real water matrices using medium pressure mercury lamps

The aim of this work is to understand the inactivation efficiency of medium pressure mercury lamps, measured in terms of growth inhibition as well as cell death, damage and response, using three strains from three different Aspergillus species (A. fumigatus, A. niger and, A. terreus) spiked in filtered surface water. A complete characterization of the effect of the treatment on each strain of the fungal species was assessed considering spores' morphology, cell wall integrity and enzymatic activity, the formation of pyrimidine dimers in the DNA and proteome analysis. Results showed that, when subjected to medium pressure mercury lamps, A. niger is the most resistant to inactivation, that both A. fumigatus and A. niger suffer more morphological changes and present a higher number of damaged spores and A. terreus presented more dead spores. DNA damages detected in A. niger were able to be repaired to some extent, under both light and dark conditions. Finally, proteome analysis showed that the UV radiation treatment triggered different types of stress response, including cell wall reorganization and DNA repair in A. fumigatus and A. terreus, and oxidative stress responses like the increase in production of citric acid and itaconic acid in A. niger and A. terreus, respectively.

Recent development in antimicrobial activity of biopolymer-inorganic nanoparticle composites with water disinfection potential: a comprehensive review

Nowadays, water-borne diseases including hepatitis remain the critical health challenge due to the inadequate supply of potable and safe water for human activities. The major cause is that the pathogenic microorganisms causing diseases have developed resistance against common techniques used by sewage water treatment plants for water disinfection. Therefore, there is a need to improve these conventional water treatment techniques by taking into consideration the application of nanotechnology for wastewater purification. The main aim of this paper is to provide a review on the synthesis of biopolymer-inorganic nanoparticle composites (BINCs), their used as antimicrobial compounds for water disinfection, as well as to elaborate on their antimicrobial mechanism of action. The microbial properties affecting the activity of antimicrobial compounds are also evaluated.

Disinfection characteristics of an advanced rotational hydrodynamic cavitation reactor in pilot scale

Hydrodynamic cavitation is a promising technique for water disinfection. In the present paper, the disinfection characteristics of an advanced hydrodynamic cavitation reactor (ARHCR) in pilot scale were studied. The effects of various flow rates (1.4-2.6 m³/h) and rotational speeds (2600-4200 rpm) on the removal of Escherichia coli (E. coli) were revealed and analyzed. The variation regularities of the log reduction and reaction rate constant at various cavitation numbers were established. A disinfection rate of 100% was achieved in only 4 min for 15 L of simulated effluent under 4200 rpm and 1.4 m³/h, with energy efficiency at 0.0499 kWh/L. A comprehensive comparison with previously introduced HCRs demonstrates the superior performance of the presented ARHCR system. The morphological changes in E. coli were studied by scanning electron microscopy. The results indicate that the ARHCR can lead to serious cleavage and surface damages to E. coli, which cannot be obtained by conventional HCRs. Finally, a possible damage mechanism of the ARHCR, including both the hydrodynamical and sonochemical effects, was proposed. The findings of the present study can provide strong support to the fundamental understanding and applications of ARHCRs for water disinfection.

Mussel-inspired surface functionalization of polyamide microfiltration membrane with zwitterionic silver nanoparticles for efficient anti-biofouling water disinfection

Mature microfiltration (MF) membrane is a low-cost, effective, and promising technology to provide affordable purified water for people living in developing countries. However, the lack of disinfection ability and inherent membrane fouling problems have seriously restricted the large-scale application of conventional MF treatment system in producing safe drinking water. In this work, zwitterionic silver nanoparticles (AgNPs) with surface modification of poly(carboxybetaine acrylate-co-dopamine methacryamide) (PCBDA) copolymers were robustly immobilized onto commercial polyamide MF membrane via mussel-inspired chemistry for water disinfection. The designed microfiltration membrane, named as PCBDA@AgNPs-MF, exhibited integrated properties of high and stable payload of AgNPs, broad-spectrum anti-adhesive and antimicrobial activities, and easy removal of inactivated microbial cells from membrane surface. Ascribing to the synergetic effect of anti-adhesive and antimicrobial features brought by zwitterionic PCBDA@AgNPs, the biofilms growth on polyamide membrane surface was significantly inhibited, which showed potential access to achieve long-term biofouling resistance and maintain water flux for conventional MF membrane. As water disinfection device, these attributes enabled PCBDA@AgNPs-MF to effectively disinfect the model and natural bacteria-contaminated water.

Cotton decorated with Cu2O-Ag and Cu2O-Ag-AgBr NPs via an in-situ sacrificial template approach and their antibacterial efficiency

Cotton fabrics decorated with Cu₂O-Ag and Cu₂O-Ag-AgBr NPs have been prepared using chemically immobilized Cu₂O NPs as sacrificial templates. The objective is to prepare Cu₂O-Ag heterostructures with Ag being intimately in contact with Cu₂O NPs by galvanic replacement reactions without addition of any external reducing agent. Field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis were used to study the morphology and the chemical composition of the nanocomposites formed on the fabrics. The morphology of the ensuing nanostructures was shown to be dependent on the Ag precursor, AgNO₃, concentration. The antimicrobial activity of the treated fabrics was evaluated against Staphylococcus aureus and Escherichia coli as model strains of gram-negative and gram-positive, respectively. The results showed that the fabrics loaded with Cu₂O-Ag and Cu₂O-Ag-AgBr nanocomposites exhibited enhanced sterilization activity compared to the Cu₂O treated fabric.

Mechanism and efficacy of virus inactivation by a microplasma UV lamp generating monochromatic UV irradiation at 222 nm

This study evaluated the potential of a microplasma UV lamp as an alternative UV source to the current mercury-based (Hg-based) UV lamp for water disinfection. We developed a set of PCR-based molecular assays (long-range qPCR, DNase, and binding assay) to quantify the adenovirus genome, capsid, and fiber damage with a wide detection range (10^0.5-10^6.5 PFU/mL). We used these molecular assays to characterize adenovirus (AdV) inactivation kinetics by microplasma UV that produced monochromatic UV at 222 nm. We found that the inactivation rate constant (0.142 cm²/mJ) due to microplasma UV was 4.4 times higher than that of low-pressure Hg UV (0.032 cm²/mJ). This high efficacy was attributed to monochromatic UV wavelength at 222 nm damaging the AdV capsid protein. The results of these molecular assays also proved that microplasma UV and medium-pressure Hg UV with a bandpass filter at 223 nm (MPUV_223nm) have a similar influence on AdV (p>0.05). We then estimated the relative energy efficiency of MPUV and microplasma UV to LPUV for 4 log reduction of the viruses. We found that the microplasma UV resulted in higher inactivation rate constants for viruses than the current Hg-based UV. Consequently, microplasma UV could be more energy efficient than low-pressure Hg UV for water disinfection if the wall-plug efficiency of the microplasma UV lamp improved to 8.4% (currently 1.5%). Therefore, the microplasma UV lamp is a promising option for water disinfection.

A review on hydrodynamic cavitation disinfection: The current state of knowledge

Disinfection, which aims to eliminate pathogenic microorganisms, is an essential step of water treatment. Hydrodynamic cavitation (HC) has emerged as a promising technology for large-scale disinfection without introducing new chemicals. HC, which can effectively induce sonochemistry by mechanical means, creates extraordinary conditions of pressures of ~1000 bar, local hotspots with ~5000 K, and high oxidation (hydroxyl radicals) in room environment. These conditions can produce highly destructive effects on microorganisms in water. In addition, the enhancements of chemical reactions and mass transfers by HC produce the synergism between HC and disinfectants or other physical treatment methods. HC is generated by hydrodynamic cavitation reactors (HCRs), therefore, their performance basically determines the effectiveness, economical efficiency, and applicability of HC disinfection. Therefore, developing high-performance HCRs and revealing the corresponding disinfection mechanisms are the most crucial issues today. In this review, we summarize the fundamental principles of HC and HCRs and recent development in HC disinfection. The energy release from cavitation phenomenon and corresponding mechanisms are elaborated. The performance (effectiveness, treatment ratio, and cost) of various HCRs, effects of treatment conditions on performance, and applicability of HC disinfection are evaluated and discussed. Finally, recommendations are provided for the future progress based on the analysis of previous studies.

Coronavirus in water environments: Occurrence, persistence and concentration methods - A scoping review

Coronaviruses (CoV) are a large family of viruses causing a spectrum of disease ranging from the common cold to more severe diseases as Middle East Respiratory Syndrome (MERS-CoV) and Severe Acute Respiratory Syndrome (SARS-CoV). The recent outbreak of coronavirus disease 2019 (COVID-19) has become a public health emergency worldwide. SARS-CoV-2, the virus responsible for COVID-19, is spread by human-to-human transmission via droplets or direct contact. However, since SARS-CoV-2 (as well as other coronaviruses) has been found in the fecal samples and anal swabs of some patients, the possibility of fecal-oral (including waterborne) transmission need to be investigated and clarified. This scoping review was conducted to summarize research data on CoV in water environments. A literature survey was conducted using the electronic databases PubMed, EMBASE, and Web Science Core Collection. This comprehensive research yielded more than 3000 records, but only 12 met the criteria and were included and discussed in this review. In detail, the review captured relevant studies investigating three main areas: 1) CoV persistence/survival in waters; 2) CoV occurrence in water environments; 3) methods for recovery of CoV from waters. The data available suggest that: i) CoV seems to have a low stability in the environment and is very sensitive to oxidants, like chlorine; ii) CoV appears to be inactivated significantly faster in water than non-enveloped human enteric viruses with known waterborne transmission; iii) temperature is an important factor influencing viral survival (the titer of infectious virus declines more rapidly at 23°C-25 °C than at 4 °C); iv) there is no current evidence that human coronaviruses are present in surface or ground waters or are transmitted through contaminated drinking-water; v) further research is needed to adapt to enveloped viruses the methods commonly used for sampling and concentration of enteric, non enveloped viruses from water environments. The evidence-based knowledge reported in this paper is useful to support risk analysis processes within the drinking and wastewater chain (i.e., water and sanitation safety planning) to protect human health from exposure to coronavirus through water.

Microbiological Reduction Strategies of Irrigation Water for Fresh Produce

ABSTRACT

Irrigation water can be a source of pathogenic contamination of fresh produce. Controlling the quality of the water used during primary production is important to ensure food safety and protect human health. Several measures to control the microbiological quality of irrigation water are available for growers, including preventative and mitigation strategies. However, clear guidance for growers on which strategies could be used to reduce microbiological contamination is needed. This study evaluates pathogenic microorganisms of concern in fresh produce and water, the microbiological criteria of water intended for agricultural purposes, and the preventative and mitigative microbial reduction strategies. This article provides suggestions for control measures that growers can take during primary production to reduce foodborne pathogenic contamination coming from irrigation water. Results show that controlling the water source, regime, and timing of irrigation may help to reduce the potential exposure of fresh produce to contamination. Moreover, mitigation strategies like electrolysis, ozone, UV, and photocatalysts hold promise either as a single treatment, with pretreatments that remove suspended material, or as combined treatments with another chemical or physical treatment(s). Based on the literature data, a decision tree was developed for growers, which describes preventative and mitigation strategies for irrigation-water disinfection based on the fecal coliform load of the irrigation water and the water turbidity. It helps guide growers when trying to evaluate possible control measures given the quality of the irrigation water available. Overall, the strategies available to control irrigation water used for fresh produce should be evaluated on a case-by-case basis because one strategy or technology does not apply to all scenarios.

HIGHLIGHTS

Application of activated persulfate for the inactivation of fecal bacterial indicators in water

Activated persulfate, as a member of the broad group of Advanced Oxidation Processes (AOPs), has emerged as a promising method for the elimination of microorganisms in aqueous matrices. This study evaluates the disinfection efficiency of this technique with respect to the inactivation of Escherichia coli and Enterococcus faecalis in water samples, as representative Gram negative and Gram positive bacterial indicators, respectively. In this perspective, various activators were employed, namely, ferric ion, heating, ultrasound application and UVA irradiation, which exhibited different bactericidal effect, depending on the operating conditions and the structural properties of each species. The highest disinfection rates were achieved with 200 mg/L of persulfate and ferric ion or heating as activators. For instance, 6 Log reductions were recorded within only 10-15 min when 30 mg/L of iron were applied, whereas the same bacterial removal was noted upon heat-activation at 50 °C, but in longer periods (i.e. 45-60 min). Nevertheless, in all cases E. faecalis was more resistant than E. coli, which was readily inactivated in shorter treatment periods. The overall process activity was deteriorated above the limit of 200 mg/L of persulfate. Ultrasound application exhibited lower performance, as even more prolonged treatment was required (120-150 min) for the same bacterial decay with the persulfate concentration not affecting substantially the process. In an attempt to improve the ultrasound activity, it was combined together with iron but with no synergistic results, as no actual enhancement of the method was observed. Finally, UVA did not seem to serve as an activator under the applied conditions, taking into account that it resulted in negligible loss of bacterial viability. Based on the current results, activated persulfate may be used successfully for disinfection purposes; however, the appropriate establishment of process variables is mostly required, considering the various resistance levels of aquatic microorganisms under stressed conditions.

Evaluation and prospects of nanomaterial-enabled innovative processes and devices for water disinfection: A state-of-the-art review

This study provided an overview of established and emerging nanomaterial (NM)-enabled processes and devices for water disinfection for both centralized and decentralized systems. In addition to a discussion of major disinfection mechanisms, data on disinfection performance (shortest contact time for complete disinfection) and energy efficiency (electrical energy per order; E_EO) were collected enabling assessments firstly for disinfection processes and then for disinfection devices. The NM-enabled electro-based disinfection process gained the highest disinfection efficiency with the lowest energy consumption compared with physical-based, peroxy-based, and photo-based disinfection processes owing to the unique disinfection mechanism and the direct mean of translating energy input to microbes. Among the established disinfection devices (e.g., the stirred, the plug-flow, and the flow-through reactor), the flow-through reactor with mesh/membrane or 3-dimensional porous electrodes showed the highest disinfection performance and energy efficiency attributed to its highest mass transfer efficiency. Additionally, we also summarized recent knowledge about current and potential NMs separation and recovery methods as well as electrode strengthening and optimization strategies. Magnetic separation and robust immobilization (anchoring and coating) are feasible strategies to prompt the practical application of NM-enabled disinfection devices. Magnetic separation effectively solved the problem for the separation of evenly distributed particle-sized NMs from microbial solution and robust immobilization increased the stability of NM-modified electrodes and prevented these electrodes from degradation by hydraulic detachment and/or electrochemical dissolution. Furthermore, the study of computational fluid dynamics (CFD) was capable of simulating NM-enabled devices, which showed great potential for system optimization and reactor expansion. In this overview, we stressed the need to concern not only the treatment performance and energy efficiency of NM-enabled disinfection processes and devices but also the overall feasibility of system construction and operation for practical application.

A systematic study of the antimicrobial mechanisms of cold atmospheric-pressure plasma for water disinfection

Waterborne diseases caused by pathogenic microorganisms pose a severe threat to human health. Cold atmospheric-pressure plasma (CAP) has recently gained much interest as a promising fast, effective, economical and eco-friendly method for water disinfection. However, the antimicrobial mechanism of CAP in aqueous environments is still not clearly understood. Herein, we investigate the role of several short-lived reactive oxygen species (ROS) and cellular responses in the CAP inactivation of yeast cells in water. The results show that singlet oxygen (¹O₂), hydroxyl radical (OH) and superoxide anion (O₂^-) are generated in this plasma-water system, and O₂^- served as the precursor of OH. The 5-min plasma treatment resulted in the effective inactivation (more than 2-log reduction) of yeast cells in water. The ROS scavengers significantly increased the survival ratio in the following order: water < D-Man (scavenging OH) < SOD (scavenging O₂^-) < L-His (scavenging ¹O₂), indicating that ¹O₂ contributes the most to the yeast inactivation. In addition, the acidic pH had a synergetic antimicrobial effect with ROS against the yeast cells. During the CAP inactivation process, yeast cells underwent apoptosis in the first 3 min due to the accumulation of intracellular ROS, mitochondrial dysfunction and intracellular acidification, later followed by necrosis under longer exposure times, attributed to the destruction of the cell membrane. Additionally, L-His could switch the cell fate from necrosis to apoptosis through mitigating plasma-induced oxidative stress, indicating that the level of oxidative stress is a critical factor for cell death fate determination. These findings provide comprehensive insights into the antimicrobial mechanism of CAP, which can promote the development of CAP as an alternative water disinfection strategy.

Water disinfection by orifice-induced hydrodynamic cavitation

Hydrodynamic Cavitation (HC) is considered as a promising water-disinfection technique. Due to the enormous complexity of the physical and chemical processes at play, research on HC reactors is usually carried out following an empirical approach. Surprisingly, past experimental studies have never been designed on dimensional-analysis principles, which makes it difficult to identify the key processes controlling the problem, isolate their effects and scale up the results from laboratory to full-scale scenarios. The present paper overcomes this issue and applies the principles of dimensional analysis to identify the major non-dimensional parameters controlling disinfection efficacy in classical HC reactors, namely orifice plates. On the basis of this analysis, it presents results from a new set of experiments, which were designed to isolate mainly the effects of the so-called cavitation number (σ_v). Experimental data confirm that the disinfection efficacy of orifice plates increases with decreasing σ_v. Finally, in order to discuss the significance of the results presented herein and frame the scope of future research, the present paper provides an overview of the drawbacks associated with dimensional analysis within the context of HC.

Review on low- and high-frequency sonolytic, sonophotolytic and sonophotochemical processes for inactivating pathogenic microorganisms in aqueous media

Ultraviolet and ultrasound-based advanced oxidation processes (AOPs) are gaining considerable research attention for water treatment and disinfection. Compared to low-frequency ultrasound (LFUS, <100 kHz), high-frequency ultrasound (HFUS, >100 kHz and MHz range) for water disinfection remains much less investigated. The present review aims at surveying and discussing literature data on microbial inactivation in non-food aqueous media using HFUS alone and with AOPs. More specifically, the review covers sonophotolytic (US/UV) processes under sequential and simultaneous modes as well as sonophotochemical processes, where both low and high frequencies were applied. Addressing a state-of-the-art biomedical research, we have attempted to provide more insight into mechanical and sonochemical mechanisms of inactivation under ultrasonic exposure. Sonoporation, intracellular generation of reactive oxygen species (ROS), energy stimulation of aquaporins to deliver ROS, and injection of extracellular ROS into sonoporated cells have all been identified as primary ways of inactivation. Application of ultrasound in the 0.2-2 MHz range and mercury-free light sources to support the Minamata Convention on Mercury is an ongoing challenge for effective elimination of microbial pathogens from water and wastewater through sonophotolytic and sonophotochemical AOPs.

Inactivation of carbapenem-resistant Klebsiella pneumoniae by photo-Fenton: Residual effect, gene evolution and modifications with citric acid and persulfate

The photo-Fenton process application to eliminate carbapenem-resistant Klebsiella pneumoniae, an antibiotic-resistant priority pathogen, was evaluated. Initially, reagents concentration effect was tested and under suitable conditions (5 mg L^-1 of Fe²⁺ and 50 mg L^-1 of H₂O₂) complete bacteria inactivation by action of hydroxyl radical and UVA plus hydrogen peroxide was achieved at 120 min. The process presented a strong residual disinfecting effect when light was turned off at only 20 min. Besides, the cultivability of treated K. pneumoniae in a selective medium containing carbapenem antibiotics was considered. bla-KPC, gene responsible for the resistance, evolution was also assessed. The bacteria response to carbapenem antibiotics was higher as the treatment time increased. In turn, bla-KPC gene remained when K. pneumoniae was completely inactivated (120 min); nevertheless, treatment times longer than 120 min diminished bla-KPC presence. Finally, the photo-Fenton process and its modifications (citric acid addition or persulfate anion instead hydrogen peroxide) were applied to a real hospital wastewater in Colombia. In such complex matrix, the conventional photo-Fenton system reached a moderate disinfection (∼3.5 log-units at 300 min). Meanwhile, in presence of citric acid total inactivation was completed at the same time. Interestingly, the H₂O₂ substitution by persulfate strongly accelerated the microorganism elimination, achieving the 6-log-units reduction after only 60 min of process action. Thus, the effective elimination of K. pneumoniae from water by the modified photo-Fenton evidenced the potential applicability of this process to limit the proliferation of antibiotic resistant bacteria.

Silica-quaternary ammonium "Fixed-Quat" nanofilm coated fiberglass mesh for water disinfection and harmful algal blooms control

Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms (HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products (DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds (QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC (Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol-gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10^-3 log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure. The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall, the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.

MS2 coliphage inactivation by Al/Fe PILC-activated Catalytic Wet Peroxide Oxidation: multiresponse statistical optimization

The optimization of the Catalytic Wet Peroxide Oxidation (CWPO) assisted by an Al/Fe-pillared clay (Al/Fe-PILC) was assessed in the inactivation of the MS2 coliphage in the presence of a synthetic surrogate of natural organic matter (NOM). The simultaneous effect of two experimental factors (i) H₂O₂ dose - (H₂O₂)_d (3.00-25.50 % of the H₂O₂ theoretically required for full mineralization) and (ii) catalyst concentration (0.33-2.60 g/L), and four non-controllable variables (covariates) (a) circumneutral pH (6.00-9.00), (b) temperature (5.00-25.0 °C), (c) synthetic NOM concentration (2.0-20.0 mg C/L) and (d) MS2 titer (10⁴, 10⁵ and 10⁶ PFU/mL) was investigated by Response Surface Methodology (RSM). Every response was modeled and maximized: (1) MS2 inactivation, (2) fraction of reacted H₂O₂, (3) decolourization and (4) NOM mineralization. Multi-response optimization via desirability function based on responses (1) to (3) achieved excellent fitting (0.94 out of 1.0) and following set of optimal experimental conditions: 0.33 g Al/Fe-PILC/L, 3.36 % (H₂O₂)_d ​(Fe_active/H₂O₂) = 0.46, giving rise to 92.9 % of MS2 inactivation and 100 % of reacted H₂O₂ at pH 7.07, 25.0 +/- 0.1 °C, 16.06 mg C/L as starting NOM concentration, and MS2 titer of 10⁶ PFU/mL after just 70 min ​of reaction.

Rationally designed tubular coaxial-electrode copper ionization cells (CECICs) harnessing non-uniform electric field for efficient water disinfection

Though well known for its anti-microbial property, copper is usually not considered for drinking water disinfection because of its health risk to human bodies under efficient biocidal concentration. Herein, we have rationally designed and constructed a tubular coaxial-electrode copper ionization cell (CECIC) that enables superior disinfection performance (~6-log removal of E. coli) with a very low effluent copper concentration (~200 μg/L). A non-uniform electric field with enhanced strength near the center electrode is generated in the chamber attributed to the coaxial center-outer electrode configuration. Exposure to the strong electric field subsequently increases the permeability of cell membrane, the excessive uptake of Cu ions into microbes, and thus the reinforced bacteria inactivation. The in-situ ionization results in a Cu ion concentration gradient with higher concentrations in the regions closer to the center. In addition, being driven by the electrophoresis and dielectrophoresis forces, the bacterial cells are transported to the vicinity of the center electrode, where both the electric field strength and Cu ion concentration are higher. These mechanisms in the CECIC synergistically result in the high inactivation efficiency with low Cu concentration in the effluent. The low-cost, high-efficiency, and disinfection-byproduct-free CECIC has shown significant potential in point-of-use applications.

Catalyst-free activation of persulfate by visible light for water disinfection: Efficiency and mechanisms

The development of cost-effective water disinfection methods is highly desired to address the problems caused by outbreak of harmful microorganisms. Sulfate radical (•SO₄^-)-based advanced oxidation technology has attracted increasing attention. However, various catalysts or UV irradiation are usually used to activate persulfate (PS), which is high-cost and the recovery of nano-sized catalysts is also challenging. This work demonstrates a new method of catalyst-free activation of persulfate by visible light (VL) for bacterial inactivation. The 6-log of E. coli cells can be inactivated within 40 min and 7-log of E. coli cells could be inactivated within 120 min by the VL/PS system. The major responsive wavelength is 420 nm, and no heat activation of PS is found during VL irradiation. A synergistic effect with synergy factor of 51.2% is found when combining the VL irradiation with heating at 50 °C. The acidic pH is benefit for the VL/PS-triggered bacterial inactivation, while bicarbonate inhibits the E. coli inactivation at the range of 0.1-20 mg/L. Mechanism study indicates the main reactive species are •SO₄^-, •O₂^- and •OH, in which •SO₄^- plays the most important role. The bacterial inactivation process shows to begin from outer membrane to intracellular components. Subsequently, the antioxidant enzyme (i.e. SOD, CAT) is induced, followed by damaging to the genomic DNA leading to fatal death of the cells. In addition, the VL/PS system is also applicable for the inactivation of other pathogenic bacteria, including Staphylococcus aureus and Pseudomonas aeruginosa, showing universality for water disinfection applications. This work not only provides a new cost-effective disinfection method without a catalyst, but also sheds light on understanding the bacterial inactivation mechanism by •SO₄^--based AOPs.

Inactivation of Adenovirus in Water by Natural and Synthetic Compounds

Millions of people use contaminated water sources for direct consumption. Chlorine is the most widely disinfection product but can produce toxic by-products. In this context, natural and synthetic compounds can be an alternative to water disinfection. Therefore, the aim of this study was to assess the inactivation of human adenovirus by N-chlorotaurine (NCT), bromamine-T (BAT) and Grape seed extract (GSE) in water. Distilled water artificially contaminated with recombinant human adenovirus type 5 (rAdV-GFP) was treated with different concentrations of each compound for up to 120 min, and viral infectivity was assessed by fluorescence microscopy. The decrease in activity of the compounds in the presence of organic matter was evaluated in water supplemented with peptone. As results, NCT and GSE inactivated approximately 2.5 log₁₀ of adenovirus after 120 min. With BAT, more than 4.0 log₁₀ decrease was observed within 10 min. The oxidative activity of 1% BAT decreased by 50% in 0.5% peptone within a few minutes, while the reduction was only 30% for 1% NCT in 5% peptone after 60 min. Organic matter had no effect on the activity of GSE. Moreover, the minimal concentration of BAT and GSE to kill viruses was lower than that known to kill human cells. It was concluded that the three compounds have potential to be used for water disinfection for drinking or reuse purposes.