Enhanced biogas production from food waste and activated sludge using advanced techniques - A review

Biogas generation using food waste anaerobic co-digestion with activated sludge provides a cleaner addressable system, an excellent solution to global challenges, the increasing energy demands, fuel charges, pollution and wastewater treatment. Regardless of the anaerobic digestate end product values, the technology lacks efficiency and process instability due to substrate irregularities. Process parameters and substrate composition, play a vital role in the efficiency and outcome of the system. Intrinsic biochar properties such as pore size, specific surface properties and cation exchange capacity make it an ideal additive that enriches microbial functions and enhances anaerobic digestion. The pretreatment and co-digestion of food waste and activated sludge are found to be significant for efficient biogas generation. The advantages, drawbacks, limitations, and technical improvements are covered extensively in the present review besides the recent advancement in the anaerobic digestion system.

Assessment, characterization, and quantification of microplastics from river sediments

Microplastic (MP), as a pollutant, is currently posing a biological hazard to the aquatic environment. The study aims to isolate, quantify, and characterize the MP pollutants in sediment samples from 14 study sites at Kaveri River, Killa Chinthamani, Tiruchirappalli, South India. With Sediment-MP Isolation (SMI) unit, density separation was done with a hydrogen peroxide solution. Four forms of MPs namely, fragments, films, foams, and fibers with orange, white, green, and saffron red were observed. The plenitude and distribution of four forms of MPs and natural substrates were geometrically independent, with large amounts of microfragments within the research region accounting for 79.72% variation by Principal Component Analysis. FT-IR analyses of MPs showed the presence of polyamide, polyethylene, polyethylene glycol, polyethylene terephthalate, polypropylene, and polystyrene. Additionally, the scanning electron microscopic analysis revealed that the MPs have differential surface morphology with rough surfaces, porous structures, fissures, and severe damage. Most MPs comprised Si, Mg, Cu, and Al, according to energy dispersive X-ray analyses. The combined SMI, instrumental analyses and evaluation (heat map) of MPs in river sediments help assess contamination levels and types of MPs. The findings might provide an insight into the status of MPs in Kavery River sediments that could help in formulating regulations for MPs reduction and contamination in rivers eventually to protect the environment.

Extraction, identification, and environmental risk assessment of microplastics in commercial toothpaste

Microplastics in personal care and food products are given much importance globally due to the adverse impact of microplastics on living beings. In the present study, microplastics from ten different commercially sold toothpaste in India were extracted by vacuum filtration and characterized with microscopic and Fourier-transform infrared spectroscopic analyses. Results revealed that colorless fragments and fibers were the microparticle types of common occurrence which ranged from 0.2 to 0.9% weight in the toothpaste with an abundance range of 32.7-83.2%. Fifty percent of the toothpaste samples showed more than 50% microplastic particle abundance indicating that the microplastic plastic particles were added by the manufacturers. The minimum size of microplastics recorded in the present study was 3.5 μm with a maximum size exceeding 400 μm. The maximum number of microplastics in the toothpaste was 167, 508 and 193 respectively, distributed in the size range of <100 μm, 100-400 μm, and >400 μm. The present study recorded four major polymer types, viz., cellophane, polypropylene, polyvinyl chloride, and polyamide in the toothpaste samples. Surprisingly, polyethylene-a common polymer reported in toothpaste was not traced in the present samples. Regarding the Indian context, the current study is a new addition to the knowledge of the occurrence of microplastics in toothpaste. The average annual addition of microplastics into the environment through toothpaste was calculated as 1.4 billion g/year for India, posing a significant threat to the environment.

Detoxification of coir pith through refined vermicomposting engaging Eudrilus eugeniae

Hazardous coir industrial waste, coir pith has been subjected to 50 days vermicomposting with Eudrilus eugeniae by amending nitrogenous legume plant, Gliricidia sepium together with cattle dung in different combinations, after 21 days precomposting using Pleurotus sajor-caju spawn. An increase in electrical conductivity, total NPK and calcium, and a decrease in organic matter, total organic carbon, C/N ratio, C/P ratio and total phenolic content in the final vermicompost were observed. Dehydrogenase, urease and cellulase activity peaked up to 30 days of vermicomposting and then declined. The phytotoxicity studies with Brassica juncea, C/N ratio and enzyme activities confirmed the stability and maturity of vermicompost. The results also demonstrated that the 2:3:1 ratio (coir pith + Gliricidia sepium + cow dung) is a suitable effective combination for nutrient-rich (N: 2.43%; P: 0.92%; K: 2.09%) vermicompost production. The total phenolic contents declined during the vermicomposting with a lower final content of 21.26 mg/g GAE in 2:3:1 combination of substrates from the initial level (105.56 mg/g GAE). Besides, the concentration of total phenol contents inversely related to the germination index of Brassica juncea (r = -0.761), indicating that the phenolic content could also play an important role in phytotoxicity. Growth and fecundity of Eudrilus eugeniae in 2:3:1 combination revealed the acceptability and rapid decomposition of coir pith substrate into vermifertilizer.

Waste Ox bone based heterogeneous catalyst synthesis, characterization, utilization and reaction kinetics of biodiesel generation from Jatropha curcas oil

The present investigation has been carried out to utilize waste animal (Ox) bone for the progress of an innovative, low-budget, pollution free, and extremely resourceful heterogeneous catalyst synthesis for Jatropha curcas oil (JCO) conversion into biodiesel. The heterogeneous catalyst synthesized was characterized by its basic strength and subjected to spectroscopic (Fourier TransformInfrared and X-Ray Diffraction) and thermogravimetric analyses. Also, the physical properties of produced biodiesel were studied. The calcined Ox bone catalyst characterization distinctly showed that there was a tremendous catalytic activity for biodiesel synthesis. The kinetic study was accomplished employing a tri-necked RB flask furnished with a condenser and agitator. At the agitation speed of 500 rpm, 5% catalyst loading rate (w/w) of oil and 12:1 methanol-oil ratio (molar), biodiesel yields were tracked based on reaction time (1-4 h) and temperature (313-338 K). The temperature at 338 K was found to be optimal to obtain maximum (96.82%) biodiesel yield. Pseudo-first order kinetics was followed in the reaction. The energy required for the activation (E_a) was 38.55 kJ mol^-1 with a frequency factor (k_o) of 7.03 × 10⁶ h^-1. The reusability studies demonstrated that the calcined animal bone catalyst was much stable up to three cycles with >90% FAME yield, which was reduced significantly (P < 0.05) to 61% in the fourth cycle. The outcome of this investigation brought to light the possibilities of utilizing calcined Ox bone catalyst and JCO as low-cost and frequently obtainable discarded waste materials that can be used as feedstock for the commercial-scale generation of biodiesel to fulfill the prospective community demands.

Valorization of food waste and poultry manure through co-composting amending saw dust, biochar and mineral salts for value-added compost production

The present study proposes a system for co-composting food waste and poultry manure amended with rice husk biochar at different doses (0, 3, 5, 10%, w/w), saw dust, and salts. The effect of rice husk biochar on the characteristics of final compost was evaluated through stabilization indices such as electrical conductivity, bulk density, total porosity, gaseous emissions and nitrogen conservation. Results indicated that when compared to control, the biochar amendment extended the thermophilic stage of the composting, accelerated the biodegradation and mineralization of substrate mixture and helped in the maturation of the end product. Carbon dioxide, methane and ammonia emissions were reduced and the nitrogen conservation was achieved at a greater level in the 10% (w/w) biochar amended treatments. This study implies that the biochar and salts addition for co-composting food waste and poultry manure is beneficial to enhance the property of the compost.

Vermiremediation of engine oil contaminated soil employing indigenous earthworms, Drawida modesta and Lampito mauritii

Engine oil consists of hazardous substances that adversely affect the environment and soil quality. Bioremediation (employing organisms) is an appropriate technique to mitigate engine oil pollution. In the present study, the earthworm species, Drawida modesta (epigeic) and Lampito mauritii (anecic) were used to restore the soil polluted with polycyclic aromatic hydrocarbons (PAHs) and total petroleum hydrocarbons (TPHs) from used engine oil. Four treatments were set up in addition to positive and negative controls. A maximum of 68.6% PAHs and 34.3% TPHs removal in the treatment with soil (1 kg), cow dung (50 g), used engine oil (7.5 mL) and earthworms was recorded after 60 days. Undoubtedly, earthworms effectively removed PAHs and TPHs from the oil-contaminated soil. PAHs were more strongly accumulated in D. modesta (16.25 mg kg^-1) than in L. mauritii (13.25 mg kg^-1). Further, histological analysis revealed the epidermal surface irregularity, cellular disintegration, and cellular debris in earthworms. The pH (6.3%), electrical conductivity (12.7%), and total organic carbon (35.4%) were significantly (at P < 0.05) decreased after 60 days; while, total nitrogen (62%), total potassium (76.2%), and total phosphorus (19.2%) were substantially increased at the end of the experiment. The seed germination assay with fenugreek indicates that germination percentage (95%), and germination index (179), were dramatically increased in earthworm inoculated treatments when compared to the negative control (without earthworms). The results reveal that there is a great scope for utilizing the earthworms, D. modesta and L. mauritii for the bioremediation of soils contaminated with PAHs and TPHs.

Co-composting of food waste and swine manure augmenting biochar and salts: Nutrient dynamics, gaseous emissions and microbial activity

The prominent characteristics of the biochar, high porosity, sorption capacity with low density improve the aeration, making it a desirable amendment material for composting process. The composting efficiency was analysed by the impact of rice husk biochar amendment (0, 2, 4, 6, 8 and 10%) in the presence of salts for the co-composting of food waste and swine manure, in composting reactors for 50 days. Results revealed that biochar amendment had improved the degradation rates by microbial activities in comparison with control. The final compost quality was improved by reducing the bulk density (29-53%), C/N ratio (29-57%), gaseous emissions (CO₂, CH₄, and NH₃) and microbial pathogens (Escherichia coli and Salmonella sp.). However, 6% biochar amendment had significant improvement in compost quality, degradation rates and nutritional value which is recommended as the ideal ratio for obtaining mature compost from the feedstock, food waste and swine manure.

Efficiency of microbial fuel cells in the treatment and energy recovery from food wastes: Trends and applications - A review

The rising global population and their food habits result in food wastage and cause an obstacle in its treatment and disposal. Due to the rapid shift in the lifestyle of the human population and urbanization, almost one-third of the food produced is wasted from various sectors like domestic sources, agricultural sectors, and industrial sectors. These food resources squandered are rich in organic biomolecules which can cause complications upon direct disposal in the environment. Conventional disposal methods like composting, landfills and incineration demand high costs besides causing severe environmental and health issues. To overcome these demerits of the conventional methods and to avoid the loss of rich organic food resources, there is an immediate need for a sustainable and eco-friendly solution for the valorization of the food wastes. Microbial fuel cells (MFCs) are gaining attention, due to their ideal approach in the production of electricity and parallel treatment of organic food wastes. The MFCs are significant as an innovative approach using microorganisms and oxidizing the organic food wastes into bio-electricity. In this review, the recent advancements and practices of the MFCs in the field of food waste treatment and management along with electricity production are discussed. The major outcome of this work highlights the setting up of MFC for the treatment of higher volumes of food waste residues and enhancing the bioelectricity production in an optimal condition. For further improvements in the food waste treatments using MFCs, greater understanding and more research needs are to be focused on the commercialization, different operational modes, operational types, and low-cost fabrication coupled with careful examination of scale-up factors.

Phycoremediation of wastewater for pollutant removal: A green approach to environmental protection and long-term remediation

Surface and water bodies in many parts of the world are affected due to eutrophication, contamination and depletion. The approach of wastewater treatment using algae for eliminating nutrients and other pollutants from domestic wastewater is growing interest among the researchers. However, sustainable treatment of the wastewater is considered to be important in establishing more effective nutrient and pollutant reduction using algal systems. In comparison to the conventional method of remediation, there are opportunities to commercially viable businesses interest with phycoremediation, thus by achieving cost reductions and renewable bioenergy options. Phycoremediation is an intriguing stage for treating wastewater since it provides tertiary bio-treatment while producing potentially valuable biomass that may be used for a variety of applications. Furthermore, the phycoremediation provides the ability to remove heavy metals as well as harmful organic substances, without producing secondary contamination. In this review, the role of microalgae in treating different wastewaters and the process parameters affecting the treatment and future scope of research have been discussed. Though several algae are employed for wastewater treatment, species of the genera Chlamydomonas, Chlorella, and Scenedesmus are extensively utilized. Interestingly, there is a vast scope for employing algal species with high flocculation capacity and adsorption mechanisms for the elimination of microplastics. In addition, the algal biomass generated during phycoremediation has been found to possess high protein and lipid contents, promising their exploitation in biofuel, food and animal feed industries.

Ligninolytic valorization of agricultural residues by Aspergillus nomius and Trichoderma harzianum isolated from gut and comb of Odontotermes obesus (Termitidae)

Fungi produce enzymes that degrade the complex lignin thereby enabling the efficient utilization of plant lignocellulosic biomass in the production of biofuel and cellulose-based products. In the present study, the agricultural residues such as paddy straw, sugarcane bagasse, and coconut husk were used as substrates for the biodegradation by Aspergillus nomius (MN700028) and Trichoderma harzianum (MN700029) isolated from gut of the termite, Odontotermes obesus and fungus comb in the termite mound, respectively. The influence of varying concentrations of different carbon sources, pH, and temperature on ligninolytic enzyme production was examined under laboratory conditions. The highest activities of manganese peroxidase (0.24 U/mL), lignin peroxidase (10.38 U/mL) and laccase (0.05 U/mL) were observed under studied conditions. Fungal pretreatment of lignocellulosic biomass for 45 days showed that A. nomius and T. harzianum degraded 84.4% and 81.66% of hemicelluloses, 8.16% and 93.75% of cellulose, and 52.59% and 65% of lignin, respectively. The interaction of pH, temperature, and different carbon sources with fungal biomass and enzyme production was found significant (p ≤ 0.05). SEM analysis indicated alterations in the microstructures of degraded lignocellulosic substrates. A. nomius and T. harzianum were highly efficient in ligninolytic enzymes production and in vitro digestibility of agricultural residues. The study reports the production of laccase by A. nomius isolated from termite gut for the first time. The fungal isolates A. nomius and T. harzianum posses potential for ligninocellulosic waste degradation.

Effect of biochar amendment on compost quality, gaseous emissions and pathogen reduction during in-vessel composting of chicken manure

Because of rapid development in the livestock industry, the production of chicken manure has subsequently increased, which may contribute to environmental pollution. In this regard, in-vessel composting of biochar amended chicken manure and sawdust mixtures was investigated to find out the effect of biochar at the ratios of 0% (control), 3% (T1), 5% (T2), and 10% (T3) on ammonia and greenhouse gases (GHGs) emission, compost quality, pathogenic contaminants and phytotoxicity. The composting process was performed in 100-L, pilot-scale, plastic, cylindrical vessels for 50 days. The addition of biochar (3%, 5%, and 10%) increased the thermophilic temperature with a significant reduction in gaseous emissions (ammonia and CO₂), microbial pathogens (Escherichia coli and Salmonella sp.), and phytotoxicity (Lepidium sativum seed germination assay) compared with that of the control compost products. However, according to the obtained results with in-vessel composting, the amendment of 10% biochar showed the most significant effects concerning the quality of the compost nutrients. The study reveals that the addition of biochar during in-vessel chicken manure composting is beneficial in the reduction of gaseous emissions and pathogenic microorganisms apart from improvement in plant nutrients.

Activation of biochar through exoenzymes prompted by earthworms for vermibiochar production: A viable resource recovery option for heavy metal contaminated soils and water

The industrial revolution and indiscriminate usage of a wide spectrum of agrochemicals account for the dumping of heavy metals in the environment. In-situ/ex-situ physical, chemical, and bioremediation strategies with pros and cons have been adopted for recovering metal contaminated soils and water. Therefore, there is an urgent requirement for a cost-effective and environment-friendly technique to combat metal pollution. Biochar combined with earthworms and vermifiltration is a suitable emerging technique for the remediation of metal-polluted soils and water. The chemical substances (e.g., sodium hydroxide, zinc chloride, potassium hydroxide, and phosphoric acid) have been used to activate biochar, which also faces several shortcomings. Studies reveal that extracellular enzymes have been used to activate biochar which is produced by earthworms and microbes that can alter the surface of the biochar. The present review focuses on the global scenario of metal pollution and its remediation through biochar activation using earthworms. The earthworms and biochar can produce "vermibiochar" which is capable of reducing the metal ions from contaminated water and soils. The vermifiltration can be a suitable technology for metal removal from wastewater/effluent. Thus, the biochar has a trick of producing entirely new options at a time when vermifiltration and other technologies are least expected. Further attention to the biochar-assisted vermifiltration of different sources of wastewater is required to be explored for the large-scale utilization of the process.

Heterogeneous base catalysts: Synthesis and application for biodiesel production - A review

Recently, much research has been carried out to find a suitable catalyst for the transesterification process during biodiesel production where heterogeneous catalysts play a crucial role. As homogenous catalysts present drawbacks such as slow reaction rate, high-cost due to the use of food grade oils, problems associated with separation process, and environmental pollution, heterogenous catalysts are more preferred. Animal shells and bones are the biowastes suitably calcined for the synthesis of heterogenous base catalyst. The catalysts synthesized using organic wastes are environmentally friendly, and cost-effective. The present review is dedicated to synthesis of heterogeneous basic catalysts from the natural resources or biowastes in biodiesel production through transesterification of oils. Use of calcined catalysts for converting potential feedstocks (vegetable oils and animal fat) into biodiesel/FAME is effective and safe, and the yield could be improved over 98%. There is a vast scope for biowaste-derived catalysts in green production of biofuel.

Metallothionein dependent-detoxification of heavy metals in the agricultural field soil of industrial area: Earthworm as field experimental model system

Earthworms are known to reclaim soil contamination and maintain soil health. In the present study, the concentration of DTPA extractable heavy metals, Cd, Cu, Cr, Pb, and Zn in vermicasts and tissues of the earthworms (anecic: Lampito mauritii; epigeic: Drawida sulcata) collected from the soils of four different industrial sites, Site-I (Sago industry), Site-II (Chemplast industry), Site-III (Dairy industry) and Site-IV (Dye industry) have been studied. The heavy metals in industrial soils recorded were 0.01-326.42 mg kg^-1 with higher Cu, Cr, and Zn contents while the vermicasts showed lower heavy metal loads with improved physicochemical properties and elevated humic substances. The higher humic substances dramatically decreased the heavy metals in the soil. The bioaccumulation factors of heavy metals (mg kg^-1) are in the order: Zn (54.50) > Cu (17.43) > Cr (4.54) > Pb (2.24) > Cd (2.12). The greatest amount of metallothionein protein (nmol g^-1) was recorded in earthworms from Site-IV (386.76) followed by Site-III (322.14), Site-II (245.82), and Site-I (232.21). Drawida sulcata can produce a considerable amount of metallothionein protein than Lampito mauritii as the metallothionein production is dependent upon the presence of pollutants. The molecular docking analysis indicates a binding score of 980 for Cd, Cr and Cu, and 372 for Zn. Pb may bind with a non-metallothionein protein of earthworms and bio-accumulated in the internal chloragogenous tissues. Metallothionein neutralizes the metal toxicity and controls the ingestion of essential elements.

Chemico-nanotreatment methods for the removal of persistent organic pollutants and xenobiotics in water - A review

While the technologies available today can generate high-quality water from wastewater, the majority of the wastewater treatment plants are not intended to eliminate emerging xenobiotic pollutants, pharmaceutical and personal care items. Most endocrine disrupting compounds (EDCs) and personal care products (PPCPs) are more arctic than most regulated pollutants, and several of them have acid or critical functional groups. Together with the trace occurrence, EDCs and PPCPs create specific challenges for removal and subsequent improvements of wastewater treatment plants. Various technologies have been investigated extensively because they are highly persistent which leads to bioaccumulation. Researchers are increasingly addressing the human health hazards of xenobiotics and their removal. The emphasis of this review was on the promising methods available, especially nanotechnology, for the treatment of xenobiotic compounds that are accidentally released into the setting. In terms of xenobiotic elimination, nanotechnology provides better treatment than chemical treatments and their degradation mechanisms are addressed.

Vermitransformation of monogastric Elephas maximus and ruminant Bos taurus excrements into vermicompost using Eudrilus eugeniae

Biotransformation of monogastric (Elephas maximus) and ruminant (Bos taurus) excrements with Eudrilus eugeniae was assessed by establishing five different treatments in triplicate: 100% elephant dung (T1), 50% elephant dung + 50% garden soil (T2), 50% elephant dung + 50% cow dung (T3), 100% cow dung (T4) and 50% cow dung + 50% garden soil (T5) and maintained for 90 days under experimental conditions. An increment of macronutrients and reduction of C/N ratio (<20) in the vermicomposts was recorded, where T3 presented higher NPK contents with the relative nutrient recovery efficiency of 1.65, 2.94 and 1.76, respectively. Cycle I (45 days) endorsed cocoons and juveniles, while Cycle II (90 days) supported sub-adults and adults. Seed germination and 28 days growth studies with Vigna unguiculata signified that the vermicomposts were phytotoxicity-free. The binary ratio in T3 (1:1) is suitable for the biotransformation of elephant dung into advantageous vermicompost with Eudrilus eugeniae.

Cleaner production of agriculturally valuable benignant materials from industry generated bio-wastes: A review

Bio-wastes from different agro-based industries are increasing at a rapid rate with the growing human population's demand for the products. The industries procure raw materials largely from agriculture, finish it with the required major product, and produce huge bio-wastes which are mostly disposed unscientifically. This creates serious environmental problems and loss of resources and nutrients. Traditional bio-wastes disposal possess several demerits which again return with negative impact over the eco-system. Anaerobic digestion, composting, co-composting, and vermicomposting are now-a-days given importance due to the improved and modified methods with enhanced transformation of bio-wastes into suitable soil amendments. The advanced and modified methods like biochar assisted composting and vermicomposting is highlighted with the updated knowledge in the field. Hence, the present study has been carried to compile the effective and efficient methods of utilizing industry generated bio-wastes for circularity between agriculture - industrial sectors to promote sustainability.

Centrality of cattle solid wastes in vermicomposting technology - A cleaner resource recovery and biowaste recycling option for agricultural and environmental sustainability

The current review reports the importance and significance of cattle solid waste in vermicomposting technology concerning biowaste pollution in the environment. Needy increasing population evokes livestock production resulting in the massive generation of livestock wastes, especially cattle dung. Improper disposal and handling of biowastes originating from agriculture, industries, forests, rural and urban areas lead to nutrient loss, environmental pollution and health risks. Among the organic waste disposal methods available, vermicomposting is regarded as an environmentally friendly technology for bioconversion of agricultural, industrial, rural and urban generated organic solid wastes which are serving as reservoirs of environmental pollution. In vermicomposting of organic wastes, cattle dung plays a central role in mineralization, nutrient recovery, earthworm and microbial activity leading to vermifertilizer production. Even though the vermicomposting studies use cattle dung invariably as an amendment material, its importance has not been reviewed to highlight its central role. Hence, the present review mainly emphasizes the key role played by cattle dung in vermicomposting. Vermiconversion of cattle dung alone and in combination with other biowaste materials of environmental concern, mechanisms involved and benefits of vermicompost in sustainable agriculture are the major objectives addressed in the present review. The analysis reveals that cattle dung is indispensable amendment material for vermicomposting technology to ensure agricultural and environmental sustainability by reducing pollution risks associated with biowastes on one hand, and nutrient-rich benign vermifertilizer production on the other hand.

Precomposting and green manure amendment for effective vermitransformation of hazardous coir industrial waste into enriched vermicompost

Vermitransformation of coir pith (CP) into enriched vermifertilizer has been achieved by amending a green-manure plant, Sesbania sesban (SS) for the first time, and cow dung (CD) in five different combinations: T1_(1:0:1), T2_(4:3:3), T3_(5:3:2), T4_(5:4:1) and T5_(1:1:0). The substrates were 28 days precomposted with Pleurotus sajor-caju followed by 50 days vermicomposting with Eisenia fetida and Eudrilus eugeniae. Results showed a significant reduction in cellulose, lignin, organic carbon, C/N ratio, C/P ratio and an increase in plant nutrients compared to control. The fertilization index and efficiency of nutrient recovery rate were higher in SS and CD amended CP vermicompost, with a maximum in T2_(4:3:3) for E. fetida and T3_(5:3:2) for E. eugeniae. The activity of dehydrogenase, urease and cellulase, and phytotoxicity assays further revealed vermicompost stability. The study concludes that T2_(4:3:3) and T3_(5:3:2) combinations respectively for E. fetida and E. eugeniae is suitable for vermitransformation of CP into enriched vermicompost.

Earthworm intervened nutrient recovery and greener production of vermicompost from Ipomoea staphylina - An invasive weed with emerging environmental challenges

The invasive weed, Ipomoea staphylina (IS) with cow dung (CD) and mushroom spent straw (MS) in four different combinations (IS:CD:MS), V1 (1:1:0), V2 (2:1:1), V3 (1:0:1) and V4 (1:1:1) were pre-decomposed for 21 days followed by 50 days vermicomposting using Eudrilus eugeniae in triplicates in order to alleviate and to utilize the weed biomass in an environment-friendly manner. The contents of organic matter, organic carbon, cellulose, lignin, C/N and C/P ratios showed a decrease, while electrical conductivity, total NPK, calcium, sodium, and nitrate-nitrogen showed a significant increase in vermicompost over control. Water-soluble organic carbon to organic nitrogen ratio and C/N ratio in V1 (0.52 and 17.55) and V4 (0.43 and 16.56), respectively, were in conformity with the maturity of vermicomposts. Scanning electron micrographs of the end products clearly showed more fragmented, fine, and porous particles in vermicompost. Copper, chromium, cadmium, lead, and zinc in vermicomposts were below the permissible limits. Dehydrogenase, acid phosphatase, alkaline phosphatase, cellulase, and protease activities were significantly higher in V4 than other treatments, implying the role of MS and CD addition during vermicomposting. Though V3 combination supported worm biomass, V4 combination was found to favor the fecundity of Eudrilus eugeniae. Results reveal that 1:1:1 combination of SI + CD + MS (V4) is suitable for utilizing the weed biomass for vermicompost production and nutrient recovery. From the biomass of environmentally problematic weed, Ipomoea staphylina, nutrient-rich vermicompost can be produced through vermitechnology for sustainable environmental management and agriculture.

Emerging nano-structured innovative materials as adsorbents in wastewater treatment

Water supply around the globe is struggling to meet the rapidly increasing demand by the population, drastic changes in climate and degrading water quality. Even though, many large-scale methods are employed for wastewater treatment they display several negative impacts owing to the presence of pollutants. Technological innovation is required for integrated water management with different groups of nanomaterials for the removal of toxic metal ions, microbial disease, organic and inorganic solutes. The method of manipulating atoms on a nanoscale is nanotechnology. Nanomembranes are used in nanotechnology to soften water and eliminate physical, chemical and biological pollutants. The present review concentrates on various nanotechnological approaches in wastewater remedy, mechanisms involved to promote implementation, benefits and limitations in comparison with current processes, properties, barriers and commercialization research needs. Also the review identifies opportunities for further exploiting the exclusive features for green water management by following the advances in nanotechnology.

Extraction of microplastics from commonly used sea salts in India and their toxicological evaluation

Microplastics (MPs) are one of the marine debris, accumulated in the ocean as a result of the successive breakdown of a large piece of plastics over several years. MPs are about less than 5 mM, have a detrimental impact on marine organisms/products (seafood/sea salts) and therefore they are considered as a global environmental pollutant. The occurrence and impact of MPs in commercial sea salts that are consumed by humans are not well studied so far. In the present study, we attempted to characterize and evaluate the in vitro toxicity of isolated MPs. Here, we have used ten brands of commercial sea salts of different origins for the identification and characterization of MPs. The average abundance of MPs in all commercial brands is < 700 MP/kg and the particle size range between 5.2 mM and 3.8 μM. The most common types of MPs were identified as fragments, fibers, and pellets. By Fourier-Transform infrared spectroscopy (FT-IR), it was found that the MPs in abundance were made of cellophane (CP), polystyrene (PR), polyamide (PA) and polyarylether (PAR). Further, in vitro toxicity assessment revealed that HEK-293 cells get detached upon treatment with MPs (MIC-75 μg mL^-1) Consequently, the AO/EB dual staining confirmed that the induction and rate of apoptosis were comparatively higher in microplastic treated HEK-293 cells. Taken together, the MPs identified are the origin of anthropogenic derivatives and they exert a lethal effect on human cells, which might be associated with health risk complications in human beings.

Nutrient recovery and vermicompost production from livestock solid wastes with epigeic earthworms

The aim of this work was to study nutrient recovery and vermicompost production from livestock solid wastes of indigenous and exotic cow breeds with epigeic earthworms. Fourteen days pre-decomposed dung of Vechur native (CD1) and exotic Jersey (CD2) breeds were vermicomposted with Perionyx excavatus and Eudrilus eugeniae for 45 days (Cycle I) and 90 days (Cycle II) including respective controls without earthworms. Vermicomposts from CD1 and CD2 substrates during Cycle I and II showed increase in NPK, Ca and micro-nutrients (P < 0.05); whereas, pH, total organic carbon, C/N and C/P ratios disclosed decrease (P < 0.05) over initial levels for both the earthworms. E. eugeniae was found efficient in vermicomposting cattle solid wastes in 45 days and CD1 yielded nutrient rich vermicompost. The study concludes that Cycle I is suitable for nutrient recovery and vermicompost production, in addition to mass multiplication of earthworms in Cycle II.