Inactivation of chlorine-resistant bacteria (CRB) via various disinfection methods: Resistance mechanism and relation with carbon source metabolism

With the widespread use of chlorine disinfection, chlorine-resistant bacteria (CRB) in water treatment systems have gained public attention. Bacterial chlorine resistance has been found positively correlated with extracellular polymeric substance (EPS) secretion. In this study, we selected the most suitable CRB controlling method against eight bacterial strains with different chlorine resistance among chloramine, ozone, and ultraviolet (UV) disinfection, analyzed the resistance mechanisms, clarified the contribution of EPS to disinfection resistance, and explored the role of carbon source metabolism capacity. Among all the disinfectants, UV disinfection showed the highest disinfection capacity by achieving the highest average and median log inactivation rates for the tested strains. For Bacillus cereus CR19, the strain with the highest chlorine resistance, 40 mJ/cm2 UV showed a 1.90 log inactivation, which was much higher than that of 2 mg-Cl2/L chlorine (0.67 log), 2 mg-Cl2/L chloramine (1.68 log), and 2 mg/L ozone (0.19 log). Meanwhile, the UV resistance of the bacteria did not correlate with EPS secretion. These characteristics render UV irradiation the best CRB controlling disinfection method. Chloramine was found to have a generally high inactivation efficiency for bacteria with high chlorine-resistance, but a low inactivation efficiency for low chlorine-resistant ones. Although EPS consumed up to 56.7% of chloramine which an intact bacterial cell consumed, EPS secretion could not explain chloramine resistance. Thus, chloramine is an acceptable CRB control method. Similar to chlorine, ozone generally selected high EPS-secreting bacteria, with EPS consuming up to 100% ozone. Therefore, ozone is not an appropriate method for controlling CRB with high EPS secretion. EPS played an important role in all types of disinfection resistance, and can be considered the main mechanism for bacterial chlorine and ozone disinfection resistance. However, as EPS was not the main resistance mechanism in UV and chloramine disinfection, CRB with high EPS secretion were inactivated more effectively. Furthermore, carbon source metabolism was found related to the multiple resistance of bacteria. Those with low carbon source metabolism capacity tended to have higher multiple resistance, especially to chlorine, ozone, and UV light. Distinctively, among the tested gram-negative bacteria, in contrast to other disinfectants, chloramine resistance was negatively correlated with EPS secretion and positively correlated with carbon source metabolism capacity, suggesting a special disinfection mechanism.

Low-NO-like Oxidation Pathway Makes a Significant Contribution to Secondary Organic Aerosol in Polluted Urban Air

Anthropogenic pollutants can greatly mediate formation pathways and chemical compositions of secondary organic aerosol (SOA) in urban atmospheres. We investigated the molecular tracers for different types of SOA in PM2.5 under varying NO/NO2 conditions in Guangzhou using source analysis of particle-phase speciated organics obtained from an iodide chemical ionization mass spectrometer with a Filter Inlet for Gases and AEROsols (FIGAERO-I-CIMS). Results show that low-NO-like pathways (when NO/NO2 < 0.2) explained ∼75% of the total measured FIGAERO-OA during regional transport periods, which was enriched in more-oxidized C4-C6 non-nitrogenous compounds over ozone accumulation. Daytime high-NO chemistry played larger roles (38%) in local pollution episodes, with organic nitrates (ONs) and nitrophenols increasing with enhanced aerosol water content and nitrate fraction. Nighttime NO3-initiated oxidation, characterized by monoterpene-derived ONs, accounted for comparable percentages (10-12%) of FIGAERO-OA for both two periods. Furthermore, the presence of organosulfates (OSs) improves the understanding of the roles of aqueous-phase processes in SOA production. Carbonyl-derived OSs exhibited a preferential formation under conditions of high aerosol acidity and/or abundant sulfate, which correlated well with low-NO-like SOA. Our results demonstrate the importance of NO/NO2 ratios in controlling SOA compositions, as well as interactions between water content, aerosol acidity, and inorganic salts in gas-to-particle partitioning of condensable organics.

Investigation of the bleaching efficiencies of different office type bleaching techniques and the changes caused on the enamel surface

The aim of this in vitro study is to evaluate the bleaching efficiency of 5 different office bleaching methods and the changes in enamel morphology after bleaching. In this study, 75 human molar teeth are used. The teeth are divided in half in the mesiodistal direction, and a total of 150 enamel samples are obtained. The obtained samples are split into 3 main groups to evaluate the bleaching efficiency, surface roughness, and enamel surface hardness, and each group is composed of 50 samples. Then, each main group was divided into 5 separate subgroups (n = 10) containing 5 varied bleaching techniques. Before the bleaching, color measurement with a spectrophotometer, surface roughness with a profilometer, and microhardness measurement with Vickers test device are performed. After that, different bleaching procedures are applied to the 5 subgroups formed. As a result of the statistical evaluation, it is found that there is a significant level of bleaching in all groups (p < 0.05). In the comparison between the groups, there is no remarkable divergence in terms of hardness and roughness levels (p˃0.05). In light of the findings obtained from our study, we suggest that ozone can be used as an alternative bleaching agent to hydrogen peroxide. In addition, it is discovered that the use of light activation is not necessary to increase bleaching effectiveness. Finally, we believe that enamel surface morphology may be affected after office bleaching methods; therefore, various precautions should be taken before and after bleaching.

Ozone Loss: A Surrogate for the Indoor Concentration of Ozone-Derived Products

Ozone concentrations tend to be substantially lower indoors than outdoors, largely because of ozone reactions with indoor surfaces. When there are no indoor sources of ozone, a common condition, the net concentration of gaseous products derived from indoor ozone chemistry scales linearly with the difference between outdoor and indoor ozone concentrations, termed "ozone loss." As such, ozone loss is a metric that might be used by epidemiologists to disentangle the adverse health effects of ozone's oxidation products from those of exposure to ozone itself. The present paper examines the characteristics, potential utility, and limitations of the ozone loss concept. We show that for commonly occurring indoor conditions, the ozone loss concentration is directly proportional to the total rate constant for ozone removal on surfaces (ksum) and inversely proportional to the net removal of ozone by air exchange (λ) plus surface reactions (ksum). It follows that the ratio of indoor ozone to ozone loss is equal to the ratio of λ to ksum. Ozone loss is a promising metric for probing potential adverse health effects resulting from exposures to products of indoor ozone chemistry. Notwithstanding its virtues, practitioners using it should be mindful of the limitations discussed in this paper.

Functional responses of two Mediterranean pine species in an ozone Free-Air Controlled Exposure (FACE) experiment

Effects of the phytotoxic and widespread ozone (O3) pollution may be species specific, but knowledge on Mediterranean conifer responses to long-term realistic exposure is still limited. We examined responses regarding to photosynthesis, needle biochemical stress markers and carbon and nitrogen (N) isotopes of two Mediterranean pine species (Pinus halepensis Mill. and Pinus pinea L.). Seedlings were grown in a Free-Air Controlled Exposure experiment with three levels of O3 (ambient air, AA [38.7 p.p.b. as daily average]; 1.5 × AA and 2.0 × AA) during the growing season (May-October 2019). In P. halepensis, O3 caused a significant decrease in the photosynthetic rate, which was mainly due to a reduction of both stomatal and mesophyll diffusion conductance to CO2. Isotopic analyses indicated a cumulative or memory effect of O3 exposure on this species, as the negative effects were highlighted only in the late growing season in association with a reduced biochemical defense capacity. On the other hand, there was no clear effect of O3 on photosynthesis in P. pinea. However, this species showed enhanced N allocation to leaves to compensate for reduced photosynthetic N- use efficiency. We conclude that functional responses to O3 are different between the two species determining that P. halepensis with thin needles was relatively sensitive to O3, while P. pinea with thicker needles was more resistant due to a potentially low O3 load per unit mass of mesophyll cells, which may affect species-specific resilience in O3-polluted Mediterranean pine forests.

The Ozonolysis of Methylated Selenide Compounds in the Atmosphere: Isotopes, Kinetics, Products, and Mechanisms

Selenium (Se) is an essential micronutrient with an important atmospheric component in its biogeochemical cycle. In this cycle, phytoplankton form volatile organic Se species, such as dimethyl selenide (CH3SeCH3) and dimethyl diselenide (CH3SeSeCH3), which are emitted into the atmosphere. To predict the atmospheric fate of these methylated Se compounds, we investigated their ozonolysis reaction. We used proton-transfer-reaction time-of-flight mass spectrometry to quantify atmospheric Se and its isotopes, and used this method in kinetic and product studies. The ozonolysis of CH3SeCH3 proceeded with a rate constant of (7.4 ± 2.2) × 10-17 cm3 molec-1 s-1 at 26 ± 1 °C with an activation energy of 50 ± 14 kJ mol-1 forming dimethyl selenoxide (CH3Se(O)CH3). Comparatively, CH3SeSeCH3 reacted with O3 at (2.6 ± 0.9) × 10-17 cm3 molec-1 s-1 at 27 ± 1 °C with an activation energy of 56 ± 5 kJ mol-1 forming methylselinic acid (CH3Se(O)OH). At 20 ppbv of O3, the atmospheric lifetimes of CH3SeCH3 and CH3SeSeCH3 are 7.6 and 22 h, respectively. The Se oxidation products were confirmed by synthesis and can serve as new atmospheric tracers of methylated Se compounds. Overall, we measured Se isotopes in real time and determined the rate constants, activation energies, and oxidation products. These mechanisms can now be used to determine the quantitative atmospheric fate of Se toward O3, and thus its distribution within a changing climate.

Accelerated Catalytic Ozonation in a Mesoporous Carbon-Supported Atomic Fe-N4 Sites Nanoreactor: Confinement Effect and Resistance to Poisoning

The design of a micro-/nanoreactor is of great significance for catalytic ozonation, which can achieve effective mass transfer and expose powerful reaction species. Herein, the mesoporous carbon with atomic Fe-N4 sites embedded in the ordered carbon nanochannels (Fe-N4/CMK-3) was synthesized by the hard-template method. Fe-N4/CMK-3 can be employed as nanoreactors with preferred electronic and geometric catalytic microenvironments for the internal catalytic ozonation of CH3SH. During the CH3SH oxidation process, the mass transfer coefficient of the Fe-N4/CMK-3 confined system with sufficient O3 transfer featured a level of at least 1.87 × 10-5, which is 34.6 times that of the Fe-N4/C-Si unconfined system. Detailed experimental studies and theoretical calculations demonstrated that the anchored atomic Fe-N4 sites and nanoconfinement effects regulated the local electronic structure of the catalyst and promoted the activation of O3 molecules to produce atomic oxygen species (AOS) and reactive oxygen species (ROS), eventually achieving efficient oxidation of CH3SH into CO2/SO42-. Benefiting from the high diffusion rate and the augmentation of AOS/ROS, Fe-N4/CMK-3 exhibited an excellent poisoning tolerance, along with high catalytic durability. This contribution provides the proof-of-concept strategy for accelerating catalytic ozonation of sulfur-containing volatile organic compounds (VOCs) by combining confined catalysis and atomic catalysts and can be extended to the purification of other gaseous pollutants.

Quantifying Ozone-Dependent Emissions of Volatile Organic Compounds from the Human Body

Ozone reactions on human body surfaces produce volatile organic compounds (VOCs) that influence indoor air quality. However, the dependence of VOC emissions on the ozone concentration has received limited attention. In this study, we conducted 36 sets of single-person chamber experiments with three volunteers exposed to ozone concentrations ranging from 0 to 32 ppb. Emission fluxes from human body surfaces were measured for 11 targeted skin-oil oxidation products. For the majority of these products, the emission fluxes linearly correlated with ozone concentration, indicating a constant surface yield (moles of VOC emitted per mole of ozone deposited). However, for the second-generation oxidation product 4-oxopentanal, a higher surface yield was observed at higher ozone concentrations. Furthermore, many VOCs have substantial emissions in the absence of ozone. Overall, these results suggest that the complex surface reactions and mass transfer processes involved in ozone-dependent VOC emissions from the human body can be represented using a simplified parametrization based on surface yield and baseline emission flux. Values of these two parameters were quantified for targeted products and estimated for other semiquantified VOC signals, facilitating the inclusion of ozone/skin oil chemistry in indoor air quality models and providing new insights on skin oil chemistry.

Long-term air pollution exposure and malignant intracranial tumours of the central nervous system: a pooled analysis of six European cohorts

BACKGROUND

Risk factors for malignant tumours of the central nervous system (CNS) are largely unknown.

METHODS

We pooled six European cohorts (N = 302,493) and assessed the association between residential exposure to nitrogen dioxide (NO2), fine particles (PM2.5), black carbon (BC), ozone (O3) and eight elemental components of PM2.5 (copper, iron, potassium, nickel, sulfur, silicon, vanadium, and zinc) and malignant intracranial CNS tumours defined according to the International Classification of Diseases ICD-9/ICD-10 codes 192.1/C70.0, 191.0-191.9/C71.0-C71.9, 192.0/C72.2-C72.5. We applied Cox proportional hazards models adjusting for potential confounders at the individual and area-level.

RESULTS

During 5,497,514 person-years of follow-up (average 18.2 years), we observed 623 malignant CNS tumours. The results of the fully adjusted linear analyses showed a hazard ratio (95% confidence interval) of 1.07 (0.95, 1.21) per 10 μg/m³ NO2, 1.17 (0.96, 1.41) per 5 μg/m³ PM2.5, 1.10 (0.97, 1.25) per 0.5 10-5m-1 BC, and 0.99 (0.84, 1.17) per 10 μg/m³ O3.

CONCLUSIONS

We observed indications of an association between exposure to NO2, PM2.5, and BC and tumours of the CNS. The PM elements were not consistently associated with CNS tumour incidence.

Solar-based photocatalytic ozonation employing novel S-scheme ZnO/Cu2O/CuO/carbon xerogel photocatalyst: effect of pH, salinity, turbidity, and temperature on salicylic acid degradation

This paper proposes the study of a solar-based photocatalytic ozonation process for the degradation of salicylic acid (SA) using a novel S-scheme ZnO/Cu2O/CuO/carbon xerogel photocatalyst. The incorporation of CuO and Cu2O aims to enhance charge mobility through the formation of p-n heterojunctions with ZnO, whereas the carbon xerogel (XC) was selected due to its eco-friendly nature, capacity to stabilize S-scheme heterojunctions as a solid-state electron mediator, and ability to function as a reducing agent under high temperatures. The characterization of the composites demonstrates that the presence of the XC during the calcination step led to the reduction of a fraction of the CuO into Cu2O, forming a ternary semiconductor heterojunction system. In terms of photocatalysis, the XC/ZnO-CuxO 5% composite achieved the best efficiency for salicylic acid degradation, mainly due to the stabilization of the S-scheme charge transfer pathway between the ZnO/CuO/Cu2O semiconductors by the XC. The total organic carbon (TOC) removal during heterogeneous photocatalysis was 80% for the solar-based process and 68% for the visible light process, after 300 min. The solar-based photocatalytic ozonation process was highly successful regarding the degradation of SA, achieving a 75% increase in the apparent reaction rate constant when compared to heterogeneous photocatalysis. Furthermore, a 78% TOC removal was achieved after 150 min, which is half the time required by the heterogeneous photocatalysis to obtain the same result. Temperature, salinity, and turbidity had major effects on the efficiency of the photocatalytic ozonation process; the system's pH did not cause any major performance variation, which holds relevance for industrial applications.

High-performance NiO@Fe3O4 magnetic core-shell nanocomposite for catalytic ozonation degradation of pharmaceutical pollution

Pharmaceuticals that are present in superficial waters and wastewater are becoming an ecological concern. Therefore, it is necessary to provide high-performance methods to limit the harmful ecological effects of these materials to achieve a sustainable environment. In this research, NiO@Fe3O4 nanocomposite was prepared by the co-precipitation method and utilized in the catalytic ozonation process for the degradation of 1-cyclopropyl-6-fluoro-4-oxo-7-piperazin-1-yl-quinoline-3-carboxylic acid (ciprofloxacin antibiotic), for the first time. The influencing parameters in the degradation process were analyzed and optimized via response surface methodology (RSM). The optimal ciprofloxacin removal efficiency (100%) was found at pH = 6.5, using 7.5 mg of the NiO@Fe3O4 nanocatalyst and 0.2 g L-1 h-1 ozone (O3) flow, applied over 20 min. Results showed a significant synergistic effect in the analyzed system, which makes the proposed catalytic ozonation process more efficient than using the catalyst and ozone separately. Also, based on the kinetic analysis data, the catalytic ozonation process followed the pseudo-first-order model. In addition, the nanocatalyst showed high recyclability and stability (88.37%) after five consecutive catalytic ozonation process cycles. In conclusion, the NiO@Fe3O4 nanocatalyst/O3 system can be effectively used for the treatment of pharmaceutical contaminants.

Using the POD sampler for quantitative diffusive (passive) monitoring of volatile and very volatile organics in ambient air: Sampling rates and analytical performance

POD diffusive samplers loaded with Carbopack X and Carbograph 5TD were exposed to certified calibration mixtures containing a total of 110 different ozone precursor and air toxic compounds. Constant sampling rates were identified for 39 ozone precursors and 33 air toxics. As 9 of these compounds were included in both mixtures, this meant a total of 63 different volatile and very volatile compounds were sampled using the POD with overall expanded uncertainties below 30 % for the sampling rate associated with the whole range of sampling times from 2 to 24 h. Carbograph 5TD exhibited superior performance for diffusive sampling of oxygenated and halogenated compounds in the air toxics mixture, while Carbopack X showed higher sampling efficiencies for aliphatic and aromatic hydrocarbons, as well as halogenated compounds derived from benzene and C2 carbon number hydrocarbons. A model has been developed and applied to estimate sampling rates, primarily for the more volatile and weakly adsorbed compounds, as a function of the collected amount of analyte and the exposure time. For an additional 9 ozone precursors on Carbopack X, and 11 air toxics on Carbograph 5TD, the expanded uncertainties of modelled sampling rates were reduced to below 30 % and have a significantly reduced uncertainty compared to those associated with an averaged sampling rate. The paper provides Freundlich's isotherm parameters for the estimated (modelled) sampling rates and defines a pragmatic approach to their application. It does so by identifying the best sampling time to use for the expected exposure concentrations and associated analyte masses. This allows for expansion of the sampling concentration range from hundreds ng m-3 to mg m-3, while avoiding saturation of the adsorbent. Finally, field measurement comparisons of POD samplers, pumped tube samplers and online gas chromatography (GC), for sampling periods of 3 and 7 days in a semi-rural background area, showed no significant differences between reported concentrations.

Modeling and optimization of synergistic ozone-ultraviolet-chlorine process for reclaimed water disinfection: From laboratory tests to software simulation

The ozone-ultraviolet (UV)-chlorine process is a highly effective method of disinfection in water reuse system, but currently still lacks precise quantification and accurate control. It is difficult to determine the dosage of each disinfectant because of the complex interactions that occur between disinfection units and the complicated mathematical calculation required. In this study, we proposed a dosage optimization model for ozone-UV-chlorine synergistic disinfection process. The model was able to identify the cost-effective doses of the disinfectants under the constraints of microbial inactivation, decolorization, and residual chlorine retention requirements. Specifically, the simulation of microbial inactivation rates during synergistic disinfection process was accomplished through quantification of the synergistic effects between disinfection units and the introduction of enhancement coefficients. In order to solve this optimization model rapidly and automatically, a MATLAB-based software program with graphical user interface was developed. This software consisted of calibration unit, prediction unit, assessment unit, and optimization unit, and was able to simulate synergistic ozone-UV-chlorine process and identify the optimal dose of ozone, UV, and chlorine. Validation experiments revealed good agreements between the experimental data and the results calculated by the developed software. The developed software is believed to help the water reclamation plants improve disinfection efficiency and reduce the operational costs of synergistic disinfection processes.

Soil Emissions of Reactive Nitrogen Accelerate Summertime Surface Ozone Increases in the North China Plain

Summertime surface ozone in China has been increasing since 2013 despite the policy-driven reduction in fuel combustion emissions of nitrogen oxides (NOx). Here we examine the role of soil reactive nitrogen (Nr, including NOx and nitrous acid (HONO)) emissions in the 2013-2019 ozone increase over the North China Plain (NCP), using GEOS-Chem chemical transport model simulations. We update soil NOx emissions and add soil HONO emissions in GEOS-Chem based on observation-constrained parametrization schemes. The model estimates significant daily maximum 8 h average (MDA8) ozone enhancement from soil Nr emissions of 8.0 ppbv over the NCP and 5.5 ppbv over China in June-July 2019. We identify a strong competing effect between combustion and soil Nr sources on ozone production in the NCP region. We find that soil Nr emissions accelerate the 2013-2019 June-July ozone increase over the NCP by 3.0 ppbv. The increase in soil Nr ozone contribution, however, is not primarily driven by weather-induced increases in soil Nr emissions, but by the concurrent decreases in fuel combustion NOx emissions, which enhance ozone production efficiency from soil by pushing ozone production toward a more NOx-sensitive regime. Our results reveal an important indirect effect from fuel combustion NOx emission reduction on ozone trends by increasing ozone production from soil Nr emissions, highlighting the necessity to consider the interaction between anthropogenic and biogenic sources in ozone mitigation in the North China Plain.

Air pollution trends and exceedances: ozone and particulate matter outlook in Brazilian highly urbanized zones

In Brazil, scarce air quality data hinders air pollutant chemical understanding and policy decisions regarding public health and environmental impacts. From this perspective, our study assessed the O3, PM2.5, and PM10 yearly and seasonal trends and also the WHO Air Quality Guidelines 2021 exceedance trends at 40 air quality stations located in four highly urbanized zones in Brazil (Belo Horizonte, São Paulo, Rio de Janeiro, and Espírito Santo) from early 1990s up to 2019. We applied the Mann-Kendall test aligned with Sen's Slope estimator to assess the trends and the Cox-Stuart test to verify the WHO AQG 2021 exceedances trends. Our findings pointed out that the current national legislation is outdated when compared to WHO AQG 2021 values, leading to multiple exceedances episodes. We also found out that 62% of São Paulo's stations presented O3 increasing trends, while in Rio de Janeiro 85.7% presented decreasing trends. The Cox-Stuart test pointed out that PM2.5 exceedance trends showcase positive values, and most of the significative values are located in São Paulo stations. Therefore, we endorse that the national legislation needs to be updated meanwhile the air monitoring network needs to expand its coverage.

Ecotoxicity of Diazinon and Atrazine Mixtures after Ozonation Catalyzed by Na+ and Fe2+ Exchanged Montmorillonites on Lemna minor

The toxicity of two pesticides, diazinon (DAZ) and atrazine (ATR), before and after montmorillonite-catalyzed ozonation was comparatively investigated on the duckweed Lemna minor. The results allowed demonstrating the role of clay-containing media in the evolution in time of pesticide negative impact on L. minor plants. Pesticides conversion exceeded 94% after 30 min of ozonation in the presence of both Na+ and Fe2+ exchanged montmorillonites. Toxicity testing using L. minor permitted us to evaluate the change in pesticide ecotoxicity. The plant growth inhibition involved excessive oxidative stress depending on the pesticide concentration, molecular structure, and degradation degree. Pesticide adsorption and/or conversion by ozonation on clay surfaces significantly reduced the toxicity towards L. minor plants, more particularly in the presence of Fe(II)-exchanged montmorillonite. The results showed a strong correlation between the pesticide toxicity towards L. minor and the level of reactive oxygen species, which was found to depend on the catalytic activity of the clay minerals, pesticide exposure time to ozone, and formation of harmful derivatives. These findings open promising prospects for developing a method to monitor pesticide ecotoxicity according to clay-containing host-media and exposure time to ambient factors.

Inhibition of bromate formation in plasmon-enhanced catalytic ozonation over silver-doped spinel ferrite

High energy consumption and formation of harmful byproducts are two challenges faced by advanced oxidation processes (AOPs). While much research efforts have been devoted to improving the treatment efficiency, byproduct formation and control calls for more attention. In this study, the underlying mechanism of bromate formation inhibition during a novel plasmon-enhanced catalytic ozonation process with silver-doped spinel ferrite (0.5wt%Ag/MnFe2O4) as the catalysts was investigated. By scrutinizing the effects of each factor (i.e. irradiation, catalyst, ozone) as well as the combinations of different factors on major Br species involved in bromate formation, examining the distribution of Br species, and probing the reactive oxygen species partaking in the reactions, it was found that accelerated ozone decomposition which inhibited two main bromate formation pathways and surface reduction of Br species (e.g. HOBr/OBr- and BrO3-) contributed to the inhibition of bromate formation, both of which can be enhanced by the plasmonic effects of Ag and the good affinity between Ag and Br. A kinetic model was developed by simultaneously solving 95 reactions to predict the aqueous concentrations of Br species during different ozonation processes. The good agreement between the model prediction and experimental data further corroborated the hypothesized reaction mechanism.

Removal of micropollutants and ecotoxicity during combined biological activated carbon and ozone (BO3) treatment

Ozonation is a viable option to improve the removal of micropollutants (MPs) in wastewater treatment plants (WWTPs). Nevertheless, the application of ozonation is hindered by its high energy requirements and by the uncertainties regarding the formation of toxic transformation products in the process. Energy requirements of ozonation can be reduced with a pre-ozone treatment, such as a biological activated carbon (BAC) filter, that removes part of the effluent organic matter before ozonation. This study investigated a combination of BAC filtration followed by ozonation (the BO3 process) to remove MPs at low ozone doses and low energy input, and focused on the formation of toxic organic and inorganic products during ozonation. Effluent from a WWTP was collected, spiked with MPs (approximately 1 µg/L) and treated with the BO3 process. Different flowrates (0.25-4 L/h) and specific ozone doses (0.2-0.6 g O3/g TOC) were tested and MPs, ecotoxicity and bromate were analyzed. For ecotoxicity assessment, three in vivo (daphnia, algae and bacteria) and six in vitro CALUX assays (Era, GR, PAH, P53, PR, andNrf2 CALUX) were used. Results show that the combination of BAC filtration and ozonation has higher MP removal and higher ecotoxicity removal than only BAC filtration and only ozonation. The in vivo assays show a low ecotoxicity in the initial WWTP effluent samples and no clear trend with increasing ozone doses, while most of the in vitro assays show a decrease in ecotoxicity with increasing ozone dose. This suggests that for the tested bioassays, feed water and ozone doses, the overall ecotoxicity of the formed transformation products during ozonation was lower than the overall ecotoxicity of the parent compounds. In the experiments with bromide spiking, relevant formation of bromate was observed above specific ozone doses of approximately 0.4 O3/g TOC and more bromate was formed for the samples with BAC pre-treatment. This indirectly indicates the effectivity of the pre-treatment in removing organic matter and making ozone more available to react with other compounds (such as MPs, but also bromide), but also underlines the importance of controlling the ozone dose to be below the threshold to avoid formation of bromate. It was concluded that treatment of the tested WWTP effluent in the BO3 process at a specific ozone dose of 0.2 g O3/g TOC, results in high MP removal at limited energy input while no increase in ecotoxicity, nor formation of bromate was observed under this condition. This indicates that the hybrid BO3 process can be implemented to remove MPs and improve the ecological quality of this WWTP effluent with a lower energy demand than conventional MP removal processes such as standalone ozonation.

Mitigation of benzoic acid-driven autotoxicity in waste nutrient solution using O3 and O3/H2O2 treatments: Seed germination and root growth of Lactuca sativa L

Benzoic acid (BA), a secondary metabolite released through root exudates, is considered to be the most common inhibitor that leads to plant autotoxicity, even at low concentrations in closed hydroponic systems. In this study, to mitigate BA-driven autotoxicity, the effects of O3 and O3/H2O2 oxidation treatment (O3 concentration: 1, 2, 4, 8 mg L-1, H2O2 concentration: 4, 8 mg L-1) on waste nutrient solution (WNS) were investigated in terms of BA degradation, the rate of germination inhibition (GI), and the rate of root growth inhibition (RI). In the case of O3 treatment, the BA degradation rate improved up to 14.1% as the O3 concentration increased, while alleviation of GI was insignificant (94.6-100%), confirming that a single O3 treatment was unsuitable for mitigating autotoxicity. On the other hand, O3/H2O2 treatment increased BA degradation by up to 24.8%, thereby significantly reducing GI (up to 7.69%) and RI (up to 0.88%). Both the highest BA mineralization rate and phytotoxicity mitigation was observed at BA125 (4-4) (BA mineralization: 16.7%, GI: 12.82%, RI: 11.69%) and BA125 (1-8) (BA mineralization: 17.7%, GI: 7.69%, RI: 0.88%) at each H2O2 concentration. In addition, the operating costs were evaluated by a chemical and electricity cost analysis at the different treatments. As a result, the operating costs of BA125 (4-4) and BA125 (1-8) were calculated to be 0.40 and 0.42 $ L-1 mg-1 of mineralized BA, respectively. After consideration of the mineralization rate, autotoxicity mitigation, and operating cost, BA125 (1-8) was suggested for the optimal treatment condition and our findings would contribute to the alleviation of BA-driven autotoxicity.

Evaluation of the role of superoxide radical as chain carrier for the formation of hydroxyl radical during ozonation

Superoxide radicals (O2•-) have been suggested as an important chain carrier in the radical chain reaction that promotes ozone (O3) decomposition to hydroxyl radicals (•OH) during ozonation. However, due to the difficulty in measuring transient O2•- concentrations, this hypothesis has not been verified under realistic ozonation conditions during water treatment. In this study, a probe compound was used in combination with kinetic modeling to evaluate the role of O2•- for O3 decomposition during ozonation of synthetic solutions with model promotors and inhibitors (methanol and acetate or tert-butanol) and natural waters (one groundwater and two surface waters). By measurement of the abatement of spiked tetrachloromethane (as a O2•- probe), the O2•- exposure during ozonation was determined. Based on the measured O2•- exposures, the relative contribution of O2•- to O3 decomposition, in comparison to OH-, •OH, and dissolved organic matter (DOM), was quantitatively evaluated using kinetic modeling. The results show that water compositions (e.g., the concentration of promotors and inhibitors, and the O3 reactivity of DOM) have a considerable effect on the extent of the O2•--promoted radical chain reaction during ozonation. In general, the reaction with O2•- accounted for ∼59‒70% and ∼45‒52% of the overall O3 decomposition during ozonation of the selected synthetic solutions and natural waters, respectively. This confirms that O2•- plays a critical role in promoting O3 decomposition to •OH. Overall, this study provides new insights on the controlling factors for ozone stability during ozonation processes.

First Atmospheric Measurements and Emission Estimates of HFO-1336mzz(Z)

For the past few years, short-lived unsaturated halocarbons have been marketed as environmentally friendly replacements for long-lived halogenated greenhouse gases and ozone-depleting substances. The phase-in of unsaturated halocarbons for various applications, such as refrigeration and foam blowing, can be tracked by their emergence and increase in the atmosphere. We present the first atmospheric measurements of the hydrofluoroolefin (HFO) HFO-1336mzz(Z) ((Z)-1,1,1,4,4,4-hexafluoro-2-butene, cis-CF3CH═CHCF3), a newly used unsaturated hydrofluorocarbon. HFO-1336mzz(Z) has been detected in >90% of all measurements since 2018 during multi-month campaigns at three Swiss and one Dutch location. Since 2019, it is found in ∼30% of all measurements that run continuously at the Swiss high-altitude Jungfraujoch station. During pollution events, mole fractions of up to ∼10 ppt were observed. Based on our measurements, Swiss and Dutch emissions were estimated at 2-7 Mg yr-1 (2019-2021) and 30 Mg yr-1 (2022), respectively. Modeled spatial emission distributions only partly conform to population density in both countries. Monitoring the presence of new unsaturated halocarbons in the atmosphere is crucial since long-term effects of their degradation products are still debated. Furthermore, the production of HFOs involves climate-active substances, which may leak to the atmosphere─in the case of HFO-1336mzz(Z), for example, the ozone-depleting CFC-113a (CF3CCl3).

Efficient inactivation of amoeba spores and their intraspore bacteria by solar/chlorine: Kinetics and mechanisms

Amoebae are widespread in water and serve as environment vectors for pathogens, which may threaten public health. This study evaluated the inactivation of amoeba spores and their intraspore bacteria by solar/chlorine. Dictyostelium discoideum and Burkholderia agricolaris B1qs70 were selected as model amoebae and intraspore bacteria, respectively. Compared to solar irradiation and chlorine, solar/chlorine enhanced the inactivation of amoeba spores and intraspore bacteria, with 5.1 and 5.2-log reduction at 20 min, respectively. The enhancement was similar in real drinking water by solar/chlorine under natural sunlight. However, the spore inactivation decreased to 2.97-log by 20 min solar/chlorine under oxygen-free condition, indicating that ozone played a crucial role in the spore inactivation, as also confirmed by the scavenging test using tert‑butanol to scavenge the ground-state atomic oxygen (O(3P)) as a ozone precursor. Moreover, solar/chlorine induced the shape destruction and structural collapse of amoeba spores by scanning electron microscopy. As for intraspore bacteria, their inactivation was likely ascribed to endogenous reactive oxygen species. As pH increased from 5.0 to 9.0, the inactivation of amoeba spores decreased, whereas that of intraspore bacteria was similar at pH 5.0 and 6.5 during solar/chlorine treatment. This study first reports the efficient inactivation of amoeba spores and their intraspore pathogenic bacteria by solar/chlorine in drinking water.

Short-term effects of air pollution and weather changes on the occurrence of acute aortic dissection in a cold region

Background

Air pollution and severe weather conditions can adversely affect cardiovascular disease emergencies. Nevertheless, it remains unclear whether air pollutants and low ambient temperature can trigger the occurrence of acute aortic dissection (AAD) in cold regions.

Methods

We applied a retrospective analysis to assess the short-term effects of air pollution and ambient temperature on the occurrence of AAD in Harbin, China. A total of 564 AAD patients were enrolled from a major hospital in Harbin between January 1, 2017, and February 5, 2021. Weather condition data and air pollutant concentrations, including fine particulate matter smaller than 10 μm (PM10) and 2.5 μm in diameter (PM2.5), nitrogen dioxide (NO2), sulfur dioxide (SO2), carbon monoxide (CO), and ozone (O3), were collected every day. Conditional logistic regressions and correlation analysis were applied to analyze the relationship of environmental and atmospheric parameters with AAD occurrence at lags of 0 to 7 days. Specifically, we appraised the air quality index, CO, NO2, SO2, O3, PM10, PM2.5, temperature, dew point temperature, atmospheric pressure, and cloud amount.

Results

A total of 1,496 days at risk were assessed, of which 564 patients developed AAD. Specifically, AAD did not occur on 1,043 (69.72%) days, while 1 or more cases occurred on 453 (30.28%) days. Several pollution and weather predictors for AAD were confirmed by multilevel modeling. The air quality index (p = 0.0012), cloud amount (p = 0.0001), and concentrations of PM2.5 (p = 0.0004), PM10 (p = 0.0013), NO2 (p = 0.0007) and O3 (p = 0.0001) predicted AAD as early as 7 days before the incident (lag of 7 days) in the study period. However, only concentrations of the air pollutants NO2 (p = 0.0468) and O3 (p = 0.011) predicted the occurrence of AAD after the COVID-19 outbreak. Similar predictive effects were observed for temperature, dew point temperature, and atmospheric pressure (all p < 0.05) on all days.

Conclusion

The risk of AAD is closely related to air pollution and weather characteristics in Harbin. While causation was not determined, the impact of air pollutants on the risk of AAD was reduced after the COVID-19 outbreak.

ACBiGRU-DAO: Attention Convolutional Bidirectional Gated Recurrent Unit-based Dynamic Arithmetic Optimization for Air Quality Prediction

Over the past decades, air pollution has turned out to be a major cause of environmental degradation and health effects, particularly in developing countries like India. Various measures are taken by scholars and governments to control or mitigate air pollution. The air quality prediction model triggers an alarm when the quality of air changes to hazardous or when the pollutant concentration surpasses the defined limit. Accurate air quality assessment becomes an indispensable step in many urban and industrial areas to monitor and preserve the quality of air. To accomplish this goal, this paper proposes a novel Attention Convolutional Bidirectional Gated Recurrent Unit based Dynamic Arithmetic Optimization (ACBiGRU-DAO) approach. The Attention Convolutional Bidirectional Gated Recurrent Unit (ACBiGRU) model is determined in which the fine-tuning parameters are used to enhance the proposed method by Dynamic Arithmetic Optimization (DAO) algorithm. The air quality data of India was acquired from the Kaggle website. From the dataset, the most-influencing features such as Air Quality Index (AQI), particulate matter namely PM2.5 and PM10, carbon monoxide (CO) concentration, nitrogen dioxide (NO2) concentration, sulfur dioxide (SO2) concentration, and ozone (O3) concentration are taken as input data. Initially, they are preprocessed through two different pipelines namely imputation of missing values and data transformation. Finally, the proposed ACBiGRU-DAO approach predicts air quality and classifies based on their severities into six AQI stages. The efficiency of the proposed ACBiGRU-DAO approach is examined using diverse evaluation indicators namely Accuracy, Maximum Prediction Error (MPE), Mean Absolute Error (MAE), Mean Square Error (MSE), Root Mean Square Error (RMSE), and Correlation Coefficient (CC). The simulation result inherits that the proposed ACBiGRU-DAO approach achieves a greater percentage of accuracy of about 95.34% than other compared methods.

Effects of elevated carbon dioxide (CO2)and ozone (O3)concentrations on ectoenzyme activities in rice rhizospheric soil

Rising atmospheric carbon dioxide (CO2) and ozone (O3) concentrations are the main global change drivers. Soil ectoenzymes play an important role in maintaining soil ecosystem services. Exploring the responses of soil ectoenzymes to elevated CO2 and O3 concentrations is important for combating global climate change. In this study, we simulated elevated CO2 concentrations (+200 μmol·mol-1, eCO2), elevated O3 concentrations (0.04 μmol·mol-1, eO3), and their combination (eCO2+eO3) in open-top chambers (OTCs), and investigated the responses of rhizospheric soil ectoenzyme activities. The results showed that eCO2 significantly increased the β-D-Glucosidase (βG) activity by 73.0%, and decreased that of polyphenol oxidase (PHO), peroxidase (PEO), and acid phosphatase (AP) by 48.9%, 46.6% and 72.9% respectively, but did not affect that of cellulose hydrolase (CBH) and β-N-Acetylglucosaminidase (NAG). eO3 significantly reduced the activities of CBH and AP by 34.2% and 30.4%, respectively. The activities of PHO and AP were reduced by 87.3% and 32.3% under the eCO2+eO3 compared with the control, respectively. Results of the principal coordinate analysis, permutation multivariate analysis of variance and redundancy analysis showed that both elevated CO2 and O3 significantly affected soil ectoenzyme activities, with stronger effects of elevated CO2 than elevated O3. Root nitrogen content, root carbon to nitrogen ratio, soil microbial biomass carbon and nitrate nitrogen were the main drivers of soil ectoenzyme activities under elevated CO2 and O3. Elevated O3 could partially neutralize the effects of elevated CO2 on soil ectoenzyme activities. In conclusion, elevated CO2 and O3 restrained the activities of most soil ectoenzyme, suggesting that climate change would threat soil ecosystem services and functions in the agroecosystem.

The Impact of Climate Change on Asthma and Allergic-Immunologic Disease

PURPOSE OF REVIEW

This review discusses climate change-related impacts on asthma and allergic-immunologic disease, relevant US public health efforts, and healthcare professional resources.

RECENT FINDINGS

Climate change can impact people with asthma and allergic-immunologic disease through various pathways, including increased exposure to asthma triggers (e.g., aeroallergens, ground-level ozone). Climate change-related disasters (e.g., wildfires, floods) disrupting healthcare access can complicate management of any allergic-immunologic disease. Climate change disproportionately affects some communities, which can exacerbate disparities in climate-sensitive diseases like asthma. Public health efforts include implementing a national strategic framework to help communities track, prevent, and respond to climate change-related health threats. Healthcare professionals can use resources or tools to help patients with asthma and allergic-immunologic disease prevent climate change-related health impacts. Climate change can affect people with asthma and allergic-immunologic disease and exacerbate health disparities. Resources and tools are available to help prevent climate change-related health impacts at the community and individual level.

Molecularly imprinted polymers (MIPs) as efficient catalytic tools for the oxidative degradation of 4-nonylphenol and its by-products

Water pollution is a current global concern caused by emerging pollutants like nonylphenol (NP). This endocrine disruptor cannot be efficiently removed with traditional wastewater treatment plants (WTPs). Therefore, this work aimed to evaluate the adsorption influence of molecularly imprinted polymers (MIPs) on the oxidative degradation (ozone and ultraviolet irradiations) of 4-nonylphenol (4-NP) and its by-products as a coadjuvant in WTPs. MIPs were synthesized and characterized; the effect of the degradation rate under system operating conditions was studied by Box-Behnken response surface design of experiments. The variables evaluated were 4-NP concentration, ozone exposure time, pH, and MIP amount. Results show that the MIPs synthesized by co-precipitation and bulk polymerizations obtained the highest retention rates (> 90%). The maximum adsorption capacities for 4-NP were 201.1 mg L-1 and 500 mg L-1, respectively. The degradation percentages under O3 and UV conditions reached 98-100% at 120 s of exposure at different pHs. The degradation products of 4-NP were compounds with carboxylic and ketonic acids, and the MIP adsorption was between 50 and 60%. Our results present the first application of MIPs in oxidation processes for 4-NP, representing starting points for the use of highly selective materials to identify and remove emerging pollutants and their degradation by-products in environmental matrices.

A critical mini-review on challenge of gaseous O3 toward removal of viral bioaerosols from indoor air based on collision theory

COVID-19, a pandemic of acute respiratory syndrome diseases, led to significant social, economic, psychological, and public health impacts. It was not only uncontrolled but caused serious problems at the outbreak time. Physical contact and airborne transmission are the main routes of transmission for bioaerosols such as SARS-CoV-2. According to the Centers for Disease Control (CDC) and World Health Organization (WHO), surfaces should be disinfected with chlorine dioxide, sodium hypochlorite, and quaternary compounds, while wearing masks, maintaining social distance, and ventilating are strongly recommended to protect against viral aerosols. Ozone generators have gained much attention for purifying public places and workplaces' atmosphere, from airborne bioaerosols, with specific reference to the COVID-19 pandemic outbreak. Despite the scientific concern, some bioaerosols, such as SARS-CoV-2, are not inactivated by ozone under its standard tolerable concentrations for human. Previous reports did not consider the ratio of surface area to volume, relative humidity, temperature, product of time in concentration, and half-life time simultaneously. Furthermore, the use of high doses of exposure can seriously threaten human health and safety since ozone is shown to have a high half-life at ambient conditions (several hours at 55% of relative humidity). Herein, making use of the reports on ozone physicochemical behavior in multiphase environments alongside the collision theory principles, we demonstrate that ozone is ineffective against a typical bioaerosol, SARS-CoV-2, at nonharmful concentrations for human beings in air. Ozone half-life and its durability in indoor air, as major concerns, are also highlighted in particular.

Synergistic association of long-term ozone exposure and solid fuel use with biomarkers of advanced fibrosis

This study aims to explore the association of combined exposure to cooking fuel type and ambient ozone (O3) levels with hepatic fibrosis indices among rural adults. A total of 21,010 participants were derived from the Henan Rural Cohort. Information regarding cooking fuel type was collected through a questionnaire, and the concentration of ground-level O3 for each subject was obtained from the Tracking Air Pollution in China (TAP) dataset. A generalized linear model was used to examine the independent association of cooking fuel type or O3 exposure with hepatic fibrosis indices (FIB-4, APRI, and AST/ALT), and their possible interactions with advanced fibrosis were conducted. Compared to clean fuel users, solid fuel users had increased the risk of advanced fibrosis, the adjusted odds ratio (OR) of its assessment by FIB-4 1.240 (1.151, 1.336), by APRI 1.298 (1.185, 1.422), and by AST/ALT 1.135 (1.049, 1.227), respectively. Compared to low O3 exposure, the adjusted ORs of advanced fibrosis assessed by FIB-4, APRI, and AST/ALT in women with high O3 exposure were correspondingly 1.219 (1.138, 1.305), 1.110 (1.017, 1.212), and 0.883 (0.822, 0.949). The adjusted ORs of advanced fibrosis assessed by FIB-4, APRI, and AST/ALT for solid fuel users with high O3 exposure relative to clean fuel users with low O3 exposure in women were 1.557 (1.381, 1.755), 1.427 (1.237, 1.644), and 0.979 (0.863, 1.108), respectively. Significant additive effect of O3 exposure and solid fuel use on FIB-4-defined advanced fibrosis was observed in women, which was quantified by RERI (0.265, 95%CI: 0.052, 0.477), AP (0.170 95%CI: 0.045, 0.295), and SI (1.906, 95%CI: 1.058, 3.432). Solid fuel users with high O3 exposure were significantly associated with elevated hepatic fibrosis indices among rural women, suggesting that poor air quality may induce hepatocellular injury, and women might be more vulnerable to air pollution. The findings indicate that using cleaner fuels in cooking is an effective measure to maintain sustainable development of the environment and gain beneficial effect on human health. Clinical trial registration: The Henan Rural Cohort Study has been registered at the Chinese Clinical Trial Register (registration number: ChiCTR-OOC-15006699). Date of registration: 06 July 2015. http://www.chictr.org.cn/showproj.aspx?proj=11375.

Atmospheric gaseous aromatic hydrocarbons in eastern China based on mobile measurements: Spatial distribution, secondary formation potential and source apportionment

Monocyclic aromatic hydrocarbons (MAHs) and polycyclic aromatic hydrocarbons (PAHs) are both well known as hazardous air pollutants and also important anthropogenic precursors of tropospheric ozone (O₃) and secondary organic aerosols (SOA). In recent years, there have been intensive studies covering MAHs emission from various sources and their behavior under stimulated photochemical conditions. Yet in-situ measurements of PAHs presence and variations in ambient air are sparse. Herein we conducted large geometrical scale mobile measurements for 16 aromatic hydrocarbons (AHs, including 7 MAHs and 9 PAHs) in eastern China between October 27 and November 8, 2019. This unique dataset has allowed for some insights in terms of AHs concentration variations, accompanying chemical composition, source contributions and spatial distributions in eastern China. In general, AHs showed a clear concentration variability between the south and the north of the Yangtze River Delta (YRD). The concentrations of PAHs were approximately 9% of AHs, but contributed 23% of SOA formation potential. Source apportionment via positive matrix factorization (PMF) model revealed that industrial processes as the largest source (44%) of observed AHs, followed by solvent usage (21%), vehicle exhaust (19%), coal combustion (11%) and coking processes (6%). In the perspective of PAHs sources, coal combustion emissions were identified as the dominating factor of a share of 41%-52% in eastern China. Our findings complemented the simultaneously monitoring information of PAHs and MAHs in eastern China, revealed the importance of PAHs to SOA formation and highlighted the necessity of formulating strategies to reduce emissions from anthropogenic sources and reduce risks to human health.

Medical ozone treatment on prevention of epidural fibrosis in the rat model

Background/Aim

Epidural fibrosis is one of the problems that can be seen after spinal surgery. The aim of this study was to investigate the possible preventive role of medical ozone (O) treatment on epidural fibrosis.

Materials and Methods

Twenty-four Sprague Dawley rats were randomly split into four groups: control (C), O, laminectomy (L), and L+O groups. Animals in the C group were sacrificed at the beginning of the experiment. The L and L+O groups had L procedure, while O treatment was supplied for the O and O+L groups. After 42 days of follow-up, for histological evaluation and biochemical measurements, the ratio of epidural fibrosis and catalase (CAT) with malondialdehyde (MDA) levels in serum, respectively, were analyzed in terms of statistical differences.

Results

Histologically, a distinct difference was o bserved in the epidural space after O treatment. A significant difference in epidural fibrosis areas is found to be between the O, L, and O+L groups (P < 0,0001). There was no statistically significant difference between CAT and MDA levels that were obtained by spectrophotometric analysis.

Conclusion

Histological results suggest that medical O treatment after L can be used as an alternative method to prevent epidural fibrosis. Further studies with wide cohorts and interval measures are required to detail the effects of doses.

Investigation on removal of multi-component volatile organic compounds in a two-stage plasma catalytic oxidation system - Comparison of X (X=Cu, Fe, Ce and La) doped Mn2O3 catalysts

Mn₂O₃-X catalysts (X = Cu, Fe, Ce and La) were prepared based on γ-Al₂O₃ for the mixture degradation of muti-component volatile organic compounds (VOCs) composed of toluene, acetone, and ethyl acetate. The catalysts were characterized, and the density functional theory (DFT) simulation of ozone adsorption on Mn₂O₃-X were carried out to investigate the influence of adsorption energy on catalytic performance. The results showed that the removal efficiency (RE) of each VOC component was similarly improved by Mn₂O₃-X catalysts, and the greatest increase in VOCs' removal efficiency was obtained (7.8% for toluene, 86.2% for acetone, and 82.5% for ethyl acetate) at a special input energy (SIE) of 700 J L^-1 with Mn₂O₃-La catalyst. Characterization results demonstrated that Mn₂O₃-La catalyst had the highest content of low valence Mn elements and the greatest O_ads/O_latt ratio, as well as the lowest reduction temperature. Mn₂O₃-La catalyst also presented superior catalytic effect in improving carbon balance (CB) and CO₂ selectivity ( [Formula: see text] ). The CB and [Formula: see text] were increased by 47.7% and 12.61% respectively with Mn₂O₃-La at a SIE of 400 J L^-1 compared with that when only γ-Al₂O₃ was applied. The DFT simulation results of ozone adsorption on Mn₂O₃-X catalysts indicated that the adsorption energy of catalyst crystal was related to the catalytic performance of the catalyst. The Mn₂O₃-La/γ-Al₂O₃ catalyst, which had the highest absolute value of adsorption energy, presented the best performance in improving VOCs' RE.

Influence of ozone microbubble enhanced oxidation on mine effluent mixes and Daphnia magna toxicity

The mining industry often must mix different kinds of water on the mine site during pre-treatment or post-treatment before the final discharge of the treated water to the environment. Microbubble ozonation has proven to be efficient in the removal of contaminants of concern from mine water, such as metals, metalloids, and nitrogen compounds, which can persist in the environment and entail toxicity issues. This study evaluated the efficiency of ozone microbubbles combined with lime precipitation on contaminant removal and its impact on toxicity for Daphnia magna with five different mine effluent mixes from an active mine site located in Abitibi-Témiscamingue, QC, Canada. For the non-acidic mixes, two scenarios were tested: first, pre-treatment of metals using lime precipitation and a flocculant was conducted prior to ozonation; and second, ozonation was conducted prior to metals post-treatment using the same precipitation and flocculation technique. Results showed that the NH₃-N removal efficiency ranged from 90% for the lower initial concentrations (1.1 mg/L) to more than 99% for the higher initial concentrations (58.4 mg/L). Moreover, ozonation without metals pre-treatment improved NH₃-N treatment efficiency in terms of kinetics but entailed abnormal toxicity issues. Results of bioassays conducted on water with metals pre-treatment did not show any toxicity events but showed abnormal toxicity patterns on the mixes treated without metals pre-treatment (diluted effluents were toxic, while undiluted were not). At 50% dilution, the water was toxic, probably due to the potential presence of metal oxide nanoparticles. The confirmation of the source of toxicity requires further investigation.

Colorimetric detection of ozone in aqueous solution and imaging in living cells using a novel hemicyanine dye

Ozone (O3) is ubiquitous in the environment and exposure to high levels of O3 has been associated with various respiratory diseases, such as asthma, emphysema, and bronchitis. Therefore, it is necessary to develop a simple and efficient detection method for monitoring O3 in the environment and living cells. In this study, an intramolecular charge-transfer (ICT) compound was designed and synthesized based on a phenol-type hemicyanine dye and 4-bromo-1-butene, which could specifically detect O3 in aqueous solution. Due to the ICT process, the absorption spectrum, fluorescence spectrum, and color of the probe hemicyanine-butyl-3-enyl (HCB) changed significantly and thus the rapid and sensitive detection of O3 was realized. The interaction between O3 and the probe HCB could be completed within 40 min, and the detection limit of O3 was as low as 2.15 × 10-7 mol L-1. Finally, the proposed method was successfully applied to the visual detection of O3 in a simulated O3 environment and living cells.

Emission of VOCs from service stations in Beijing: Species characteristics and pollutants co-control based on SOA and O3

Currently, air pollution is primarily characterized by PM_2.5 and O₃. Therefore, the co-control of PM_2.5 and O₃ has become an important task of atmosphere pollution prevention and control in China. However, few studies have been conducted on the emissions from vapor recovery and processes, which is an important source of VOCs. This paper analyzed the VOC emissions of three vapor process technologies in service stations and first proposed key pollutants for priority control based on the coordinated reactivity of O₃ and SOA. The concentration of VOCs emitted from the vapor processor was 3.14-9.95 g m^-3, compared to 631.2-717.8 g m^-3 for uncontrolled vapor. Alkanes, alkenes, and halocarbons accounted for a high proportion of the vapor both before and after control. Among the emissions, i-pentane, n-butane, and i-butane were the most abundant species. Then, the species of OFP and SOAP were calculated through the maximum incremental reactivity (MIR) and fractional aerosol coefficient (FAC). The average source reactivity (SR) value of the VOC emissions from three service stations was 1.9 g g^-1, while the OFP ranged from 8.2 to 13.9 g m^-3 and SOAP ranged from 0.18 to 0.36 g m^-3. By considering the coordinated chemical reactivity of O₃ and SOA, a comprehensive control index (CCI) was proposed for the control of key pollutant species that have multiplier effects on environment. For adsorption, trans-2-butene and p-xylene were the key co-control pollutants, while toluene and trans-2-butene were the most important for membrane and condensation + membrane control. A 50% emission reduction of the top two key species that emission account for 4.3% averagely will reduce O₃ by 18.4% and SOA by 17.9%.

Field trial assessing the antimicrobial decontamination efficacy of gaseous ozone in a public bus setting

The widespread COVID-19 pandemic caused by the Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) necessitated measures aimed at preventing the spread of SARS-CoV-2. To mitigate the risk of fomite-mediated transmission, environmental cleaning and disinfection regimes have been widely implemented. However, conventional cleaning approaches such as surface wipe downs can be laborious and more efficient and effective disinfecting technologies are needed. Gaseous ozone disinfection is one technology which has been shown to be effective in laboratory studies. Here, we evaluated its efficacy and feasibility in a public bus setting, using murine hepatitis virus (a related betacoronavirus surrogate) and the bacteria Staphylococcus aureus as test organisms. An optimal gaseous ozone regime resulted in a 3.65-log reduction of murine hepatitis virus and a 4.73-log reduction of S. aureus, and decontamination efficacy correlated with exposure duration and relative humidity in the application space. These findings demonstrated gaseous ozone disinfection in field settings which can be suitably translated to public and private fleets that share analogous characteristics.

Flare exhaust: An underestimated pollution source in municipal solid waste landfills

Flares are commonly used in municipal solid waste landfills, and the pollution from flare exhaust is usually underestimated. This study aimed to reveal the odorants, hazardous pollutants, and greenhouse gas emission characteristics of the flare exhaust. Odorants, hazardous pollutants, and greenhouse gases emitted from air-assisted flares and a diffusion flare were analyzed, the priority monitoring pollutants were identified, and the combustion and odorant removal efficiencies of the flares were estimated. The concentrations of most odorants and the sum of odor activity values decreased significantly after combustion, but the odor concentration could still exceed 2,000. The odorants in the flare exhaust were dominated by oxygenated volatile organic compounds (OVOCs), while the major odor contributors were OVOCs and sulfur compounds. Hazardous pollutants, including carcinogens, acute toxic pollutants, endocrine disrupting chemicals, and ozone precursors with the total ozone formation potential up to 75 ppm_v, as well as greenhouse gases (methane and nitrous oxide with maximum concentrations of 4,000 and 1.9 ppm_v, respectively) were emitted from the flares. Additionally, secondary pollutants, such as acetaldehyde and benzene, were formed during combustion. The combustion performance of the flares varied with landfill gas composition and flare design. The combustion and pollutant removal efficiencies could be lower than 90%, especially for the diffusion flare. Acetaldehyde, benzene, toluene, p-cymene, limonene, hydrogen sulfide, and methane could be priority monitoring pollutants for flare emissions in landfills. Flares are useful for odor and greenhouse gas control in landfills, but they are also potential sources of odor, hazardous pollutants, and greenhouse gases.

The catalytic oxidation process of atrazine by ozone microbubbles: Bubble formation, ozone mass transfer and hydroxyl radical generation

Ozone microbubbles have received increasing attention since they can produce hydroxyl radical (•OH) to decompose ozone-resistant pollutants. Besides, compared with conventional bubbles, microbubbles have a larger specific surface area and higher mass transfer efficiency. However, the research on the micro-interface reaction mechanism of ozone microbubbles is still relatively scarce. Herein, we systematically studied the stability of microbubbles, ozone mass transfer and atrazine (ATZ) degradation through multifactor analysis. The results revealed that bubble size was dominant in the stability of microbubbles, and gas flow rate played a major role in ozone mass transfer and degradation effects. Besides, the bubble stability accounted for the different effects of pH on ozone mass transfer in two aeration systems. Finally, kinetic models were built and employed to simulate the kinetics of ATZ degradation by •OH. The results revealed that conventional bubbles could produce •OH faster compared with microbubbles under alkaline conditions. These findings shed light on the interfacial reaction mechanisms of ozone microbubbles.

Degradation of ammonia nitrogen by an economic combined hydrodynamic cavitation method

Hydrodynamic cavitation (HC) was a kind of advanced oxidation mode. There were defects in the common HC devices, such as high energy consumption, low efficiency, and easy plugging. In order to effectively utilize HC, it was urgent to research new HC devices and used them together with other traditional water treatment methods. Ozone was widely used as a water treatment agent that does not produce harmful by-products. Sodium hypochlorite (NaClO) was efficient and cheap, but too much chlorine will be harmful to water. The combination of ozone and NaClO with the HC device of propeller orifice plate can improve the dissolution and utilization rate of ozone in wastewater, reduce the use of NaClO, and avoid the generation of residual chlorine. The degradation rate reached 99.9% when the mole ratio γ of NaClO to ammonia nitrogen (NH3-N) was 1.5 and the residual chlorine was near zero. As for the degradation rate of NH3-N or COD of actual river water and real wastewater after biological treatment, the ideal mole ratio γ was also 1.5 and the ideal O3 flow rates were 1.0 L/min. The combined method has been preliminarily applied to actual water treatment and was expected to be used in more and more scenarios.

Effect of dissolved organic matter on selective oxidation of toluene by ozone micro-nano bubble water

The oxidation capacity of ozone micro-nano bubble water (OMBW) was always higher than ozonated water due to enhanced contact by bubble interface, while the effect of coexisted dissolved organic matter (DOM) on the oxidation efficiency was still unclear. In this paper, batch experiments were carried out to investigate the selective oxidation of toluene by both OMBW and ozonated water (OW) with coexisted DOM in water. Five types of background solutions were applied in this study, including humic acid solution, fulvic acid solution and three types of diluted landfill leachates at the same content of total organic carbon. Results showed that coexisted DOM had a greater inhibition effect on toluene oxidation rate by OMBW, and the oxidation rate of toluene by OMBW and OW became close. It was mainly caused by the decreased reaction rate between toluene and hydroxyl radical (k_T-OH·) in OMBW after the introduction of DOM, which competed for the adsorption sites on micro-nano bubble interface. The fraction of ozone to oxidize toluene as well as k_T-OH· was in positive correlations with SUVA₂₅₄ and the content of humic acid-like substances, but negatively correlated with E₂/E₃, content of tryptophan-like proteins and content of fulvic acid-like substances. In addition, increasing the ozone dose was not effective in increasing the utilization rate of ozone in OMBW due to limited adsorption sites on micro-nano bubble interface. The paper was conductive to the application of ozone micro-nano bubble water in groundwater remediation with complex water matrices.

Advanced treatment of industrial wastewater by ozonation with iron-based monolithic catalyst packing: From mechanism to application

An Fe-based catalyst was prepared by oxidising waste Fe shavings directly in a solution. In engineering applications, Fe shavings were compressed and modified to form Fe-based monolithic catalyst packing. Both of which exhibited excellent catalytic activity in catalytic ozonation industrial wastewater after biochemical treatment. Fe-based monolithic catalyst packing has irregular channels, large porosity, small pore diameter, and the effective specific surface area (SSA) up to 3500 m²/m³, these characteristics are conducive to mass transfer, and promote the effective utilisation of •OH in the catalyst "action zone". A tower reactor (<3000 m³/d) and reinforced concrete construction reactor (>5000 m³/d) were designed according to the wastewater flow. Regression analysis showed that hydraulic residence time (HRT) and O₃/COD_in are important parameters in engineering design and operation. In addition, strategies for the application of Fe-based monolithic catalyst packing to wastewater with high salinity and high inorganic carbon concentration have been proposed. Fe-based monolithic catalyst packing catalytic ozonation is a relatively cost-effective and eco-friendly process with extremely broad application prospects in the advanced treatment of industrial wastewater.

Influencing pathways and toxicity changes of pre-ozonation on carcinogenic NDEA formation from greenhouse gas adsorbent DEAPA in subsequent disinfection processes

This study was to evaluate the feasibility of controlling carcinogenic nitrosodiethylamine (NDEA) formation from greenhouse gas adsorbent 3-diethylaminopropylamine (DEAPA) by pre-O₃ in subsequent chlorination/chloramination processes. The result indicated that the NDEA yields (0.4 %) during chlorination was 1.3 times of that during chloramination (0.3 %); pre-oxidation with 4 mg/L O₃ significantly cut down its formation; the reduction rates were up to 67.5 and 48.5 %, respectively. OH scavenger greatly augmented the final NDEA amount from 1.86 to 5.05 μg/L during ozonation, while its roles on subsequent processes differed with disinfection methods as well as O₃(g) dosages. Most of co-existed substances inhibited NDEA generation, except NO₂^-, CO₃^2- and SO₄^2-, which slightly promoted during ozonation. Basing on Gaussian calculation, GC/MS and UPLC-Q-TOF-MS analysis, the influencing mechanisms of pre-O₃ on NDEA formation in subsequent disinfection processes were proposed. In addition, the calculated toxicity analysis as well as the whole toxicity was applied to evaluate the possibility of pre-O₃ on risk control.

Degradation of micropollutants in secondary wastewater effluent using nonthermal plasma-based AOPs: The roles of free radicals and molecular oxidants

Emerging micropollutants (µPs) appearing in water bodies endanger aquatic animals, plants, microorganisms and humans. The nonthermal plasma-based advanced oxidation process is a promising technology for eliminating µPs in wastewater but still needs further development in view of full-scale industrial application. A novel cascade reactor design which consists of an ozonation chamber preceding a dielectric barrier discharge (DBD) plasma reactor with a falling water film on an activated carbon textile (Zorflex®) was used to remove a selection of µPs from secondary municipal wastewater effluent. Compare to previous plasma reactor, molecular oxidants degraded micropollutants again in an ozonation chamber in this study, and the utilization of different reactive oxygen species (ROS) was improved. A gas flow rate of 0.4 standard liter per minute (SLM), a water flow rate of 100 mL min^-1, and a discharge power of 25 W are identified as the optimal plasma reactor parameters, and the µP degradation efficiency and electrical energy per order value (EE/O) are 84-98% and 2.4-5.3 kW/m³, respectively. The presence of ROS during plasma treatment was determined in view of the µPs removal mechanisms. The degradation of diuron (DIU), bisphenol A (BPA) and 2-n-octyl-4-isothiazolin-3-one (OIT) was mainly performed in ozonation chamber, while the degradation of atrazine (ATZ), alachlor (ALA) and primidone (PRD) occurred in entire cascade system. The ROS not only degrade the µPs, but also remove nitrite (90.5%), nitrate (69.6%), ammonium (39.6%) and bulk organics (11.4%). This study provides insights and optimal settings for an energy-efficient removal of µPs from secondary effluent using both free radicals and molecular oxidants generated by the plasma in view of full-scale application.

The aomogeneous and heterogeneous oxidation of organophosphate esters (OPEs) in the atmosphere: Take diphenyl phosphate (DPhP) as an example

Organophosphate esters (OPEs) are widely detected in the atmosphere. However, the atmospheric oxidative degradation mechanism of OPEs has not been closely examined. This work took density functional theory (DFT) to investigate the tropospheric ozonolysis of organophosphates, represented by diphenyl phosphate (DPhP), including adsorption mechanisms on the surface of titanium dioxide (TiO₂) mineral aerosols and oxidation reaction of hydroxyl groups (·OH) after photolysis. Besides, the reaction mechanism, reaction kinetics, adsorption mechanism, and ecotoxicity evaluation of the transformation products were also studied. At 298 K, the total reaction rate constants k_O3, k_OH, k_TiO2-O3, and k_TiO2-OH are 5.72 × 10^-15 cm³ molecule^-1 s^-1, 1.68 × 10^-13 cm³ molecule^-1 s^-1, 1.91 × 10^-23 cm³ molecule^-1 s^-1, and 2.30 × 10^-10 cm³ molecule^-1 s^-1. The atmospheric lifetime of DPhP ozonolysis in the near-surface troposphere is 4 min, much lower than that of hydroxyl radicals (·OH). Besides, the lower the altitude is, the stronger the oxidation is. The TiO₂ clusters carry DPhP promoting ·OH oxidation but inhibiting ozonolysis of DPhP. Finally, the main transformation products of this process are glyoxal, malealdehyde, aromatic aldehydes, etc., which are still ecotoxic. The findings shed new light on the atmospheric governance of OPEs.

Effect of cold plasma on breaking activated sludge and the output dominance of protein

Upon contacting with water, cold plasma should produce numerous ozone molecules and free electrons at room temperature. In this study, a cold plasma generator was used to break the walls of residual activated sludge obtained from domestic sewage. The impact was mainly influenced by the ozone generated. With 800 W power, sludge wastewater pH of 12.0, and under continuous treatment for 10 h, the system's reduction efficiency for the dry sludge was ≈90%. Furthermore, the organic matter content (especially protein) of the upper layer of the sludge solution increased a lot after the sludge digestion. This observation proved the reduction of sludge from both sides. Moreover, when the cold plasma technique was compared with thermal acid hydrolysis, thermal alkali hydrolysis, and ultrasonication for extracting protein from activated sludge, cold plasma wall-breaking sludge exhibited the highest efficiency, reaching 38.2% under ambient temperature. After the analysis, the toxic metal content in the extracted protein was near zero, which is a level other protein extraction methods via sludge breaking have not achieved to date, we attribute this efficiency to free electrons the cold plasma produce. These species promote the transformation of metal ions into atomic metals, thereby facilitating their removal.

Multi-scale structure characterization of ozone oxidized waxy rice starch

The elucidation of multi-scale structural variation and oxidation reaction mechanism of ozone oxidized waxy rice starch molecules remains a big challenge, limiting its development of intensive processing. In the present work, the changes in the structure of waxy rice starch after ozone treatment were systematically researched by various characterization methods. The study has shown that with the increase in ozone oxidation time, the granules of oxidized starch were polygons with multiple face depressions. It was also observed that ozone first attacked the amorphous zone of the starch granules and then penetrated the crystalline zone. Combining 1D and 2D NMR (¹H NMR, ¹³C NMR, HSQC and HMBC) and other methods, it was proved that ozone oxidation led to ring splitting between C₂ and C₃ of the glucose unit. The resulting hemiacetal groups showed different types of structures. Among them, the main structures were intramolecular acetals and intermolecular hemiacetals. This research offered theoretical guidance for the utilization of ozone oxidation technology for starch modification and the development of waxy rice new foods.