Fate of engineered nanoparticles: Implications in the environment

Environmental behavior and toxic effects of micro(nano)plastics and engineered nanoparticles on marine organisms under ocean acidification: A review

Ocean acidification (OA) driven by human activities and climate change presents new challenges to marine ecosystems. At the same time, the risks posed by micro(nano)plastics (MNPs) and engineered nanoparticles (ENPs) to marine ecosystems are receiving increasing attention. Although previous studies have uncovered the environmental behavior and the toxic effects of MNPs and ENPs under OA, there is a lack of comprehensive literature reviews in this field. Therefore, this paper reviews how OA affects the environmental behavior of MNPs and ENPs, and summarizes the effects and the potential mechanisms of their co-exposure on marine organisms. The review indicates that OA changes the marine chemical environment, thereby altering the behavior of MNPs and ENPs. These changes affect their bioavailability and lead to co-exposure effects. This impacts marine organisms' energy metabolism, growth and development, antioxidant systems, reproduction and immunity. The potential mechanisms involved the regulation of signaling pathways, abnormalities in energy metabolism, energy allocation, oxidative stress, decreased enzyme activity, and disruptions in immune and reproductive functions. Finally, based on the limitations of existing research, actual environment and hot issues, we have outlined future research needs and identified key priorities and directions for further investigation. This review deepens our understanding of the potential effects of MNPs and ENPs on marine organisms under OA, while also aiming to promote further research and development in related fields.

Antioxidant-related enzymes and peptides as biomarkers of metallic nanoparticles (eco)toxicity in the aquatic environment

Increased awareness of the impact of human activities on the environment has emerged in recent decades. One significant global environmental and human health issue is the development of materials that could potentially have negative effects. These materials can accumulate in the environment, infiltrate organisms, and move up the food chain, causing toxic effects at various levels. Therefore, it is crucial to assess materials comprising nano-scale particles due to the rapid expansion of nanotechnology. The aquatic environment, particularly vulnerable to waste pollution, demands attention. This review provides an overview of the behavior and fate of metallic nanoparticles (NPs) in the aquatic environment. It focuses on recent studies investigating the toxicity of different metallic NPs on aquatic organisms, with a specific emphasis on thiol-biomarkers of oxidative stress such as glutathione, thiol- and related-enzymes, and metallothionein. Additionally, the selection of suitable measurement methods for monitoring thiol-biomarkers in NPs' ecotoxicity assessments is discussed. The review also describes the analytical techniques employed for determining levels of oxidative stress biomarkers.

Effects of ZnWO4 nanoparticles on growth, photosynthesis, and biochemical parameters of the green microalga Raphidocelis subcapitata

Nanoparticles have applications in many sectors in the society. ZnWO4 nanoparticles (ZnWO4-NPs) have potential in the fabrication of sensors, lasers, and batteries, and in environmental remediation. Thus, these NPs may reach aquatic ecosystems. However, we still do not know their effects on aquatic biota and, to our knowledge, this is the first study that evaluates the toxicity of ZnWO4-NPs in a eukaryotic organism. We evaluated the toxicity of ZnWO4-NPs on the green microalga Raphidocelis subcapitata for 96 h, in terms of growth, cell parameters, photosynthesis, and biochemical analysis. Results show that most of Zn was presented in its particulate form, with low amounts of Zn2+, resulting in toxicity at higher levels. The growth was affected from 8.4 mg L-1, with 96h-IC50 of 23.34 mg L-1. The chlorophyll a (Chl a) content increased at 30.2 mg L-1, while the fluorescence of Chl a (FL3-H) decreased at 15.2 mg L-1. We observed increased ROS levels at 44.4 mg L-1. Regarding photosynthesis, the NPs affected the oxygen evolving complex (OEC) and the efficiency of the photosystem II at 22.9 mg L-1. At 44.4 mg L-1 the qP decreased, indicating closure of reaction centers, probably affecting carbon assimilation, which explains the decay of carbohydrates. There was a decrease of qN (non-regulated energy dissipation, not used in photosynthesis), NPQ (regulated energy dissipation) and Y(NPQ) (regulated energy dissipation via heat), indicating damage to the photoprotection system; and an increase in Y(NO), which is the non-regulated energy dissipation via heat and fluorescence. The results showed that ZnWO4-NPs can affect the growth and physiological and biochemical parameters of the chlorophycean R. subcapitata. Microalgae are the base of aquatic food chains, the toxicity of emerging contaminants on microalgae can affect entire ecosystems. Therefore, our study can provide some help for better protection of aquatic ecosystems.

Carbon Nanomaterial Fluorescent Probes and Their Biological Applications

Fluorescent carbon nanomaterials have broadly useful chemical and photophysical attributes that are conducive to applications in biology. In this review, we focus on materials whose photophysics allow for the use of these materials in biomedical and environmental applications, with emphasis on imaging, biosensing, and cargo delivery. The review focuses primarily on graphitic carbon nanomaterials including graphene and its derivatives, carbon nanotubes, as well as carbon dots and carbon nanohoops. Recent advances in and future prospects of these fields are discussed at depth, and where appropriate, references to reviews pertaining to older literature are provided.

Insight interactions of engineered nanoparticles with aquatic higher plants for phytoaccumulation, phytotoxicity, and phytoremediation applications: A review

With the growing age of human civilization, industrialization has paced up equally which is followed by the innovation of newer concepts of science and technology. One such example is the invention of engineered nanoparticles and their flagrant use in widespread applications. While ENPs serve their intended purposes, they also disrupt the ecological balance by contaminating pristine aquatic ecosystems. This review encompasses a comprehensive discussion about the potent toxicity of ENPs on aquatic ecosystems, with a particular focus on their impact on aquatic higher plants. The discussion extends to elucidating the fate of ENPs upon release into aquatic environments, covering aspects ranging from morphological and physiological effects to molecular-level phytotoxicity. Furthermore, this level of toxicity has been correlated with the determination of competent plants for the phytoremediation process towards the mitigation of this ecological stress. However, this review further illustrates the path of future research which is yet to be explored. Determination of the genotoxicity level of aquatic higher plants could explain the entire process comprehensively. Moreover, to make it suitable to be used in natural ecosystems phytoremediation potential of co-existing plant species along with the presence of different ENPs need to be evaluated. This literature will undoubtedly offer readers a comprehensive understanding of the stress induced by the irresponsible release of engineered nanoparticles (ENP) into aquatic environments, along with insights into the resilience characteristics of these pristine ecosystems.

Nanoparticulate pollutants in the environment: Analytical methods, formation, and transformation

The wide application of nanomaterials and plastic products generates a substantial number of nanoparticulate pollutants in the environment. Nanoparticulate pollutants are quite different from their bulk counterparts because of their unique physicochemical properties, which may pose a threat to environmental organisms and human beings. To accurately predict the environmental risks of nanoparticulate pollutants, great efforts have been devoted to developing reliable methods to define their occurrence and track their fate and transformation in the environment. Herein, we summarized representative studies on the preconcentration, separation, formation, and transformation of nanoparticulate pollutants in environmental samples. Finally, some perspectives on future research directions are proposed.

Assessment by a multi-technique approach of PtNPs' transformations in waters under relevant environmental concentrations and conditions

Once released to the environment, platinum nanoparticles (PtNPs) can undergo different transformations and are affected by several environmental conditions. An only analytical technique cannot provide all the information required to understand those complex processes, so new analytical developments are demanded. In the present work, the potential of asymmetric flow field flow fractionation hyphenated to inductively coupled plasma mass spectrometry (AF4-ICP-MS) for these studies, has been investigated, and classical dynamic and electrophoretic light scattering (DLS & ELS) have been used as complementary techniques. The role of ionic strength, ionic water composition, and natural organic matter (NOM) in the behaviour of PtNPs of different sizes (5 and 50 nm) has been specifically studied. Dynamic and electrophoretic light scattering have been used to track changes in the hydrodynamic diameters (d_h) and polydispersity index (PdI) for 50 nm PtNPs (5 nm cannot be studied by DLS) and Z-potential values (for all sizes) to monitor aggregation. AF4-ICP-MS has been also employed to have a solid insight of aggregation at low environmental concentrations for different sizes of PtNPs simultaneously. The information gathered with those techniques was useful to observe changes as the ionic strength increases, which induces aggregation. Also, it was observed that this aggregation process was attenuated in the presence of organic matter. This approach, based on complementary analytical techniques, is needed for a comprehensive study of such complex interactions of NPs in the environment. AF4-ICP-MS is still under-exploited but shows a great potential for this purpose, especially low size NPs and concentrations.

Effects of soil colloids on the aggregation and degradation of engineered nanoparticles (Ti3C2Tx MXene)

Soil colloid is a nonnegligible factor when evaluating the environmental risk of engineered nanoparticles (ENPs) in the groundwater. In this study, the environmental fate of an emerging ENP (Ti₃C₂T_x MXene) in the groundwater was investigated for the first time, which currently poses a severe environmental risk due to its cytotoxicity but has received little attention. The colloidal dispersion stability and degradation kinetics of Ti₃C₂T_x MXene in the groundwater were evaluated by considering the effects of soil colloids prepared from sodium humate (SH), montmorillonite (MT), and a natural soil (NS) under variable solution chemistry. The results showed that the affinity of soil colloids with Ti₃C₂T_x followed an SH > MT > NS sequence. Increasing SH concentration led to Ti₃C₂T_x disaggregation by enhancing the electrical and steric repulsive forces, while MT and NS resulted in hetero-aggregation because of the elevated collision frequency. SH and MT enhanced the critical coagulation concentrations of Ti₃C₂T_x by 100 and 10 folders, respectively, via surface coating process, while NS slightly reduced due to the bridging effects induced by the soluble cations. The soil colloids promoted Ti₃C₂T_x degradation compared with their absence and in an SH > MT ≫ NS sequence. SH and MT were through forming Ti-O-C and Si-O-Ti bonds with Ti₃C₂T_x via their carboxyl and hydroxyl groups, respectively, rendering the Ti₃C₂T_x surface more reactive and faster degradation. NS showed a weak promotion effect because of its less affinity with Ti₃C₂T_x and limited organic matter and clay contents with hydroxyl and carboxyl groups. This study demonstrated the unstable environmental behaviors of Ti₃C₂T_x in the groundwater and mitigated its environmental risk concerns.

Understanding the risks of mercury sulfide nanoparticles in the environment: Formation, presence, and environmental behaviors

Mercury (Hg) could be microbially methylated to the bioaccumulative neurotoxin methylmercury (MeHg), raising health concerns. Understanding the methylation of various Hg species is thus critical in predicting the MeHg risk. Among the known Hg species, mercury sulfide (HgS) is the largest Hg reservoir in the lithosphere and has long been considered to be highly inert. However, with advances in the analytical methods of nanoparticles, HgS nanoparticles (HgS NPs) have recently been detected in various environmental matrices or organisms. Furthermore, pioneering laboratory studies have reported the high bioavailability of HgS NPs. The formation, presence, and transformation (e.g., methylation) of HgS NPs are intricately related to several environmental factors, especially dissolved organic matter (DOM). The complexity of the behavior of HgS NPs and the heterogeneity of DOM prevent us from comprehensively understanding and predicting the risk of HgS NPs. To reveal the role of HgS NPs in Hg biogeochemical cycling, research needs should focus on the following aspects: the formation pathways, the presence, and the environmental behaviors of HgS NPs impacted by the dominant influential factor of DOM. We thus summarized the latest progress in these aspects and proposed future research priorities, e.g., developing the detection techniques of HgS NPs and probing HgS NPs in various matrices, further exploring the interactions between DOM and HgS NPs. Besides, as most of the previous studies were conducted in laboratories, our current knowledge should be further refreshed through field observations, which would help to gain better insights into predicting the Hg risks in natural environment.

Influence of aggregation and sedimentation behavior of bare and modified zero-valent-iron nanoparticles on the Cr(VI) removal under various groundwater chemistry conditions

Aggregation behaviors of bare, and sodium polyacrylate (PAA) and starch modified zero-valent-iron nanoparticles (nZVI), as well as their effects on the Cr (VI) removal were investigated by simulating the groundwater. Results showed that increased concentration of PAA (1-6 wt%) and starch (0.1-0.6 wt%) alleviated the aggregation of modified nZVI (abbreviated as P-nZVI and S-nZVI), while there was an optimum dosage of 4 wt% PAA and 0.3 wt% starch for the Cr (VI) removal, respectively. Moreover, as one of the fundamental water chemistry parameters, Ca²⁺ (0, 5, and 10 mg L^-1) greatly promoted the aggregation of modified nZVI, and decreased the Cr (VI) removal efficiency by them via forming bidentate bridging structure (between Ca²⁺ and PAA) or complexes (between Ca²⁺ and starch). Additionally, fulvic acid (FA) (0, 2, 5, and 10 mg L^-1) decreased the Cr (VI) removal by P-nZVI because of the significantly improved electronic repulsion. However, FA enhanced the aggregation of S-nZVI, but diminished its performance on Cr (VI) removal due to the bridging effect between FA and starch. The present study was of great importance in predicting the migration of nZVI and contaminants removal under complex geological conditions in groundwater.

Single and Mixture Toxicity of Boron and Vanadium Nanoparticles in the Soil Annelid Enchytraeus crypticus: A Multi-Biomarker Approach

The increased use and production of new materials has contributed to Anthropocene biodiversity decrease. Therefore, a careful and effective toxicity evaluation of these new materials is crucial. However, environmental risk assessment is facing new challenges due to the specific characteristics of nanomaterials (NMs). Most of the available ecotoxicity studies target the aquatic ecosystems and single exposures of NMs. The present study evaluated Enchytraeus crypticus survival and reproduction (28 days) and biochemical responses (14 days) when exposed to nanoparticles of vanadium (VNPs) and boron (BNPs) (single and mixture; tested concentrations: 10 and 50 mg/kg). Although at the organism level the combined exposures (VNPs + BNPs) did not induce a different toxicity from the single exposures, the biochemical analysis revealed a more complex picture. VNPs presented a higher toxicity than BNPs. VNPs (50 mg/kg), independently of the presence of BNPs (additive or independent effects), caused a decrease in survival and reproduction. However, acetylcholinesterase, glutathione S-transferase, catalase, glutathione reductase activities, and lipid peroxidation levels revealed alterations in neurotoxicity, detoxification and antioxidant responses, depending on the time and type of exposure (single or mixture). The results from this study highlight different responses of the organisms to contaminants in single versus mixture exposures, mainly at the biochemical level.

Water Chemistry, Exposure Routes, and Metal Forms Determine the Bioaccumulation Dynamics of Silver (Ionic and Nanoparticulate) in Daphnia magna

Treatment wetlands utilize various physical and biological processes to reduce levels of organic contaminants, metals, bacteria, and suspended solids. Silver nanoparticles (AgNPs) are one type of contaminant that can enter treatment wetlands and impact the overall treatment efficacy. Grazing by filter-feeding zooplankton, such as Daphnia magna, is critical to treatment wetland functioning; but the effects of AgNPs on zooplankton are not fully understood, especially at environmentally relevant concentrations. We characterized the bioaccumulation kinetics of dissolved and nanoparticulate (citrate-coated) ¹⁰⁹ Ag in D. magna exposed to environmentally relevant ¹⁰⁹ Ag concentrations (i.e., 0.2-23 nmol L^-1 Ag) using a stable isotope as a tracer of Ag. Both aqueous and nanoparticulate forms of ¹⁰⁹ Ag were bioavailable to D. magna after exposure. Water chemistry affected ¹⁰⁹ Ag influx from ¹⁰⁹ AgNP but not from ¹⁰⁹ AgNO₃ . Silver retention was greater for citrate-coated ¹⁰⁹ AgNP than dissolved ¹⁰⁹ Ag, indicating a greater potential for bioaccumulation from nanoparticulate Ag. Feeding inhibition was observed at higher dietary ¹⁰⁹ Ag concentrations, which could lead to reduced treatment wetland performance. Our results illustrate the importance of using environmentally relevant concentrations and media compositions when predicting Ag bioaccumulation and provide insight into potential effects on filter feeders critical to the function of treatment wetlands. Environ Toxicol Chem 2022;41:726-738. © 2021 SETAC.

Detection and Characterization of TiO2 Nanomaterials in Sludge from Wastewater Treatment Plants of Chihuahua State, Mexico

TiO₂ nanoparticles (TiO₂-NPs) have a wide range of industrial applications (paintings, sunscreens, food and cosmetics) and is one of the most intensively used nanomaterials worldwide. Leaching from commercial products TiO₂-NPs are predicted to significantly accumulate in wastewater sludges, which are then often used as soil amendment. In this work, sludge samples from four wastewater treatment plants of the Chihuahua State in Mexico were obtained during spring and summer (2017). A comprehensive characterization study was performed by X-ray based (laboratory and synchrotron) techniques and electron microscopy. Ti was detected in all sludge samples (1810–2760 mg/kg) mainly as TiO₂ particles ranging from 40 nm up to hundreds of nm. Micro-XANES data was analyzed by principal component analysis and linear combination fitting enabling the identification of three predominant Ti species: anatase, rutile and ilmenite. Micro-XANES from the smaller Ti particles was predominantly anatase (68% + 32% rutile), suggesting these TiO₂-NPs originate from paintings and cosmetics. TEM imaging confirmed the presence of nanoscale Ti with smooth surface morphologies resembling engineered TiO₂-NPs. The size and crystalline phase of TiO₂-NPs in the sludge from this region suggest increased reactivity and potential toxicity to agro-systems. Further studies should be dedicated to evaluating this.

Effect of long-term low concentrations of TiO2 nanoparticles on dewaterability of activated sludge and the relevant mechanism: the role of nanoparticle aging

Nanoparticles can undergo aging phenomena in sewage treatment systems, which alter their physical and chemical properties. However, the effect of aged nanoparticles on the dewatering performance of activated sludge under long-term low concentrations is yet to be reported in sewage treatment systems. Here, we compared the chronic effects of pristine and aged TiO₂ nanoparticles on the sludge dewatering index, which includes specific resistance to filtration (SRF) and bound water (BW) in a sequencing batch reactor (SBR) at μg/L concentration levels, and analyzed the relevant mechanisms. The results indicated that aging in the sludge supernatant altered the photosensitivity and water stability of nanoparticles, which was mainly due to the changes in the zeta potential and energy band of the particle and was ultimately attributed to the combined effect of particle surface inclusions such as organic matter and inorganic salt. At 10 μg/L, nanoparticles reduced the sludge dewaterability, which observed an improvement at 100 μg/L. This is because 10 μg/L promoted the secretion of extracellular polymeric substances (EPS), which regulated the structure of sludge flora and increased the abundance of secreted quorum sensing-acyl-homoserine lactones (QS-AHL) and EPS genera, while the corresponding exposure results for 100 μg/L were the opposite, owing to the damage and necrosis effects caused by exposure under long-term light, which reduced EPS production and increased sludge density. Interestingly, aging could alleviate the effects of two exposure concentrations on sludge dewatering, mainly because of the decrease in the photoactivity of the nanoparticles. The results of this study show that environmental aging could delay, but not reverse the results of exposure to specific concentrations of nanoparticles. However, the significantly different ecological effects of photosensitive nanoparticles with two environmentally relevant concentration should be refined and confirmed again in freshwater environments to provide a basis for subsequent scientific management and control of photosensitive nanoparticles.

Influences of petroleum hydrocarbon pyrene on the formation, stability and antibacterial activity of natural Au nanoparticles

The effect of pyrene on the formation of naturally Au nanoparticles (AuNPs) in the presence of humic acid (HA) under UV irradiation is described. TEM, EDS, FTIR and XPS were carried out to prove the formation of AuNPs and display their morphologies and formation mechanism. There are little differences between size, morphology and function groups of surface coated materials of AuNPs formed with and without pyrene. With the presence of HA, pyrene showed an inhibiting effect on the reduction of Au ion via competition for O₂^•-, thereby decreasing the production of AuNPs. However, AuNPs formed by HA-pyrene showed higher stability than AuNPs formed by HA with the sedimentation rates of 4.13% and 13.68% respectively after 30-d standing. As for the antibacterial activities against Staphylococcus aureus and Escherichia coli, AuNPs formed by HA-pyrene were more toxic than AuNPs formed by HA. Meanwhile, changes of environmental factors such as temperature, pH and ionic strength exhibited similar influence trend on the formation of AuNPs in the presence and absence of pyrene. The results suggest that the typical petroleum hydrocarbon pyrene contained in spilled oil could influence the formation, fate and ecotoxicity of AuNPs.

Behavior of engineered nanoparticles in aquatic environmental samples: Current status and challenges

The increasing use of engineered nanoparticles (ENPs) in consumer products has led to their increased presence in natural water systems. Here, we present a critical overview of the studies that analyzed the fate and transport behavior of ENPs using real environmental samples. We focused on cerium dioxide, titanium dioxide, silver, carbon nanotubes, and zinc oxide, the widely used ENPs in consumer products. Under field scale settings, the transformation rates of ENPs and subsequently their physicochemical properties (e.g., toxicity and bioavailability) are primarily influenced by the modes of interactions among ENPs and natural organic matter. Other typical parameters include factors related to water chemistry, hydrodynamics, and surface and electronic properties of ENPs. Overall, future nanomanufacturing processes should fully consider the health, safety, and environmental impacts without compromising the functionality of consumer products.

The impacts of metal-based engineered nanomaterial mixtures on microbial systems: A review

The last decade has witnessed tremendous growth in the commercial use of metal-based engineered nanomaterials (ENMs) for a wide range of products and processes. Consequently, direct and indirect release into environmental systems may no longer be considered negligible or insignificant. Yet, there is an active debate as to whether there are real risks to human or ecological health with environmental exposure to ENMs. Previous research has focused primarily on the acute effects of individual ENMs using pure cultures under controlled laboratory environments, which may not accurately reveal the ecological impacts of ENMs under real environmental conditions. The goal of this review is to assess our current understanding of ENM effects as we move from exposure of single to multiple ENMs or microbial species. For instance, are ENMs' impacts on microbial communities predicted by their intrinsic physical or chemical characteristics or their effects on single microbial populations; how do chronic ENM interactions compare to acute toxicity; does behavior under simplified laboratory conditions reflect that in environmental media; finally, is biological stress modified by interactions in ENM mixtures relative to that of individual ENM? This review summarizes key findings and our evolving understanding of the ecological effects of ENMs under complex environmental conditions on microbial systems, identifies the gaps in our current knowledge, and indicates the direction of future research.

Environmental Hazards of Boron and Vanadium Nanoparticles in the Terrestrial Ecosystem-A Case Study with Enchytraeus crypticus

From the start of the 21st century, nanoecotoxicological research has been growing in fast steps due to the need to evaluate the safety of the increasing use of engineered nanomaterials. Boron (B) and vanadium (V) nanoparticles (NPs) generated by anthropogenic activities are subsequently released in the environment; therefore, organisms can be continuously exposed to these NPs for short or long periods. However, the short and long-term effects of BNPs and VNPs on soil organisms are unknown. This work aimed to recognize and describe their potential toxicological effects on the model species Enchytraeus crypticus, assessing survival and reproduction, through a longer-term exposure (56 days (d)-OECD test extension of 28 d), and avoidance behavior, through a short-term exposure (48 hours (h)). After 28 d, BNPs did not induce a significant effect on E. crypticus survival, whereas they decreased the organisms' reproduction at 500 mg/kg. From 10 to 500 mg/kg, VNPs decreased the E. crypticus survival and/or reproduction. After 56 d, 100 to 500 mg/kg BNPs and 50 to 500 mg/kg VNPs, decreased the reproduction output of E. crypticus. The estimated Effect Concentrations (EC_x) based on reproduction, for BNPs, were lower at 56 d compared with 28 d; for VNPs, an opposite pattern was found: EC_x 28 d < EC_x 56 d. BNPs did not induce an avoidance behavior, but organisms avoided the soil contaminated with 10 mg VNPs/kg. The tested NPs showed different E. crypticus apical effects at 28 d from the ones detected at 56 d, dependent on the type of NPs (B vs. V). In general, VNPs showed to be more toxic than BNPs. However, the effects of VNPs were alleviated during the time of exposure, contrarily to BNPs (which became more toxic with extended duration). The present study adds important information about NPs toxicity with ecological significance (at the population level). Including long-term effects, the obtained results contributes to the improvement of NPs risk assessment.

Nanoparticles-EPS corona increases the accumulation of heavy metals and biotoxicity of nanoparticles

Microbial extracellular polymeric substances (EPS) coating nanoparticles (NPs) surface can form NPs-EPS corona, which significantly affect the adsorption of NPs to toxic substances and alter the ecotoxicological effect of NPs. In this work, the EPS coronas on TiO₂ NPs (TNPs) and CeO₂ NPs (CNPs) were characterized and the adsorption characteristics of NPs with and without EPS corona to five heavy metals were investigated in single-metal and multiple-metal systems. The results of spectral analysis showed that NPs-EPS corona exhibited new crystalline phases and abundant functional groups. Moreover, 42 and 13 proteins were identified in the TNPs-EPS and CNPs-EPS coronas, respectively. The rates of Cd²⁺, Pb²⁺, Cu²⁺, Ni²⁺ and Ag⁺ adsorption by NPs-EPS corona increased to values that were 6.7-7.6, 4.4-5.1, 4.2-5.5, 3.9-4.9 and 8.5-8.8 times those of NPs without EPS corona, respectively, in single-metal system. NPs-EPS coronas are effective in absorbing Ag⁺, Pb²⁺ and Cu²⁺ compared with Cd²⁺and Ni²⁺ in multiple metal adsorption. These results indicated that NPs-EPS corona effectively adsorb and remove heavy metals by forming NPs-EPS-metal complexes and inducing precipitation. However, NPs-EPS corona can enhance the toxicity of NPs by accumulating highly-toxic heavy metals in aquatic environments.

Metal- and metal/oxide-based engineered nanoparticles and nanostructures: a review on the applications, nanotoxicological effects, and risk control strategies

The production and demand of nanoparticles in the manufacturing sector and personal care products, release a large number of engineered nanoparticles (ENPs) into the atmosphere, aquatic ecosystems, and terrestrial environments. The intentional or involuntary incorporation of ENPs into the environment is carried out through different processes. The ENPs are combined with other compounds and release into the atmosphere, settling on the ground due to the water cycle or other atmospheric phenomena. In the case of aquatic ecosystems, the ENPs undergo hetero-aggregation and sedimentation, reaching different living organisms and flora, as well as groundwater. Accordingly, the high mobility of ENPs in diverse ecosystems is strongly related to physical, chemical, and biological processes. Recent studies have been focused on the toxicological effects of a wide variety of ENPs using different validated biological models. This literature review emphasizes the study of toxicological effects related to using the most common ENPs, specifically metal and metal/oxides-based nanoparticles, addressing different synthesis methodologies, applications, and toxicological evaluations. The results suggest negative impacts on biological models, such as oxidative stress, metabolic and locomotive toxicity, DNA replication dysfunction, and bioaccumulation. Finally, it was consulted the protocols for the control of risks, following the assessment and management process, as well as the classification system for technological alternatives and risk management measures of ENPs, which are useful for the transfer of technology and nanoparticles commercialization.

Nonspherical Metal-Based Nanoarchitectures: Synthesis and Impact of Size, Shape, and Composition on Their Biological Activity

Metal-based nanoentities, apart from being indispensable research tools, have found extensive use in the industrial and biomedical arena. Because their biological impacts are governed by factors such as size, shape, and composition, such issues must be taken into account when these materials are incorporated into multi-component ensembles for clinical applications. The size and shape (rods, wires, sheets, tubes, and cages) of metallic nanostructures influence cell viability by virtue of their varied geometry and physicochemical interactions with mammalian cell membranes. The anisotropic properties of nonspherical metal-based nanoarchitectures render them exciting candidates for biomedical applications. Here, the size-, shape-, and composition-dependent properties of nonspherical metal-based nanoarchitectures are reviewed in the context of their potential applications in cancer diagnostics and therapeutics, as well as, in regenerative medicine. Strategies for the synthesis of nonspherical metal-based nanoarchitectures and their cytotoxicity and immunological profiles are also comprehensively appraised.

Resistance of multidrug resistant Escherichia coli to environmental nanoscale TiO2 and ZnO

Excessive production and utilization of nanoparticles (NPs) at industrial and household levels releases substantial quantities of NPs into the environment. These can be harmful to different types of organisms and cause adverse effects on ecosystems. Purchased TiO₂ and ZnO NPs were characterized via XRD, XPS, FESEM, and Zeta potential. This study elucidates how multidrug resistant Escherichia coli LM13, which was recovered from livestock manure, counteracts the antibacterial activities of TiO₂ and ZnO NPs to survive in the environment. E. coli ATCC25922, which is susceptible to antibiotics, was used as control. A dose-response experiment showed that the antibacterial activity of TiO₂ was lower than that of ZnO NPs and, LM13 was more resistant to NPs than ATCC25922. An AcrAB-TolC efflux pump along with its regulation genes helped LM13 to minimize NP toxicity. Flow cytometry findings also indicated that the intensity of the side-scatter light parameter increased with TiO₂ and ZnO NPs in a dose dependent manner, suggesting NP uptake by the both strains. The generation of reactive oxygen species in LM13 was several-fold lower than in ATCC25922, suggesting that reactive oxygen species mainly contribute to the toxicity mechanism. These results illustrate the necessity to evaluate the impacts of NPs on the survival capacity of bacteria and on the resistance genes in bacteria with higher NP resistance than NP susceptible bacteria.

Successful remediation of soils with mixed contamination of chromium and lindane: Integration of biological and physico-chemical strategies

Soils contaminated by organic and inorganic pollutants like Cr(VI) and lindane, is currently a main environmental challenge. Biological strategies, such as biostimulation, bioaugmentation, phytoremediation and vermiremediation, and nanoremediation with nanoscale zero-valent iron (nZVI) are promising approaches for polluted soil health recovery. The combination of different remediation strategies might be key to address this problem. For this reason, a greenhouse experiment was performed using soil without or with an organic amendment. Both soils were contaminated with lindane (15 mg kg^-1) and Cr(VI) (100 or 300 mg kg^-1). After one month of aging, the following treatments were applied: (i) combination of bioaugmentation (actinobacteria), phytoremediation (Brassica napus), and vermiremediation (Eisenia fetida), or (ii) nanoremediation with nZVI, or (iii) combination of biological treatments and nanoremediation. After 60 days, the wellness of plants and earthworms was assessed, also, soil health was evaluated through physico-chemical parameters and biological indicators. Cr(VI) was more toxic and decreased soil health, however, it was reduced to Cr(III) by the amendment and nZVI and, to a lesser extent, by the biological treatment. Lindane was more effectively degraded through bioremediation. In non-polluted soils, nZVI had strong deleterious effects on soil biota when combined with the organic matter, but this effect was reverted in soils with a high concentration of Cr(VI). Therefore, under our experimental conditions bioremediation might be the best for soils with a moderate concentration of Cr(VI) and organic matter. The application of nZVI in soils with a high content of organic matter should be avoided except for soils with very high concentrations of Cr(VI). According to our study, among the treatments tested, the combination of an organic amendment, biological treatment, and nZVI was shown to be the strategy of choice in soils with high concentrations of Cr(VI) and lindane, while for moderate levels of chromium, the organic amendment plus biological treatment is the most profitable treatment.

Research progress of nanoplastics in freshwater

With the mass production and use of plastic products, which leads to their continuous entry into the water environment, the problem of environmental pollution has been paid more and more attention by scholars from different countries. In recent years, a large number of studies have focused on microplastics, but few on nanoplastics (NPs). However, NPs are smaller in size, have a higher affinity for cells, and surface and volume ratios are higher than those of microplastics. NPs may also enter biological tissues, blood and cells, which may cause greater potential harm to organisms. In this paper, firstly, the environmental fate of NPs accumulation and deposition is summarized, and further research is needed in the future; secondly, the current techniques for NPs extraction and characterization of NPs extraction and characterization are summarized. At present, the analytical methods of NPs are in the primary stage, and lack of standardized and accurate methods; finally, the toxic effects of NPs on biological morphology, behavior and reproduction are discussed. It has been found that the small size and high surface area of NPs make them more toxic to organisms than microplastics. However, most of the current toxicological studies of NPs on freshwater organisms could not be simulated in real environment.

Carbon-based sustainable nanomaterials for water treatment: State-of-art and future perspectives

The supply of safe drinking and clean water is becoming increasingly challenging proposition throughout the world. The deployment of environmentally sustainable nanomaterials with unique advantages namely high efficiency and selectivity, earth-abundance, recyclability, low-cost of production processes, and stability, has been a priority although several important challenges and constraints still remained unresolved. Carbon nanomaterials namely activated carbon, multi-walled- and single-walled carbon nanotubes, have been developed and applied as adsorbents for wastewater treatment and purification; graphene and graphene oxide-based nanomaterials as well as carbon and graphene quantum dots-derived nanomaterials have shown significant promise for water and wastewater treatment and purification, especially, for industrial- and pharmaceutical-laden wastes. This review encompasses advanced carbonaceous nanomaterials and methodologies that are deployed for the elimination of contaminants and ionic metals in aqueous media, and as novel nanosorbents for wastewater, drinking and ground water treatment. Additionally, recent trends and challenges pertaining to the sustainable carbon and graphene quantum dots-derived nanomaterials and their appliances for treating and purifying wastewater are highlighted.

Direct Measurements of the Forces between Silver and Mica in Humic Substance-Rich Solutions

Deposition of engineered nanoparticles onto porous media from flowing suspensions is important for soil and groundwater quality. The deposition mechanism is controlled by interaction forces between particles and collectors. We investigated the origin and magnitude of opposing forces between silver and mica surfaces (representing nanosilver and sand grains) in solutions relevant to agricultural soils with direct measurements using a surface force apparatus. Solutions of variable NaNO₃, Ca(NO₃)₂, and humic acid (HA) concentrations were used to differentiate individual contributing forces and quantify surface properties. The measured Hamaker constant for silver-water-mica was consistent with Lifshitz theory. Our results indicate that HA forms an adsorbed surface layer, but its charge, thicknesses, compressibility, and mass are significantly larger on mica than silver. Ca²⁺ primarily reduced the differences between the initially adsorbed HA layer properties on each surface, making them more similar. Force-distance profiles indicate that, when silver-mica systems were exposed to HA, osmotic-steric, electrostatic, and van der Waals forces dominate. Soft particle theory was deemed inappropriate for this system. Derjaguin's approximation was utilized to translate force measurements into interaction energy between nanosilver particles and mica collectors. We propose attachment efficiency estimates from measured surface properties, which suggest high particle mobility when nanosilver is applied to HA-rich agricultural soils with modest ionic strength.

Environmental impact of nano-functionalized construction materials: leaching of titanium and nitrates from photocatalytic pavements under outdoor conditions

There is a growing use of nano-functionalized construction materials, which contain nanoparticles embedded in their bulk or deposited on their surfaces. In the case of photocatalytic materials, nano-TiO₂ is usually added to provide it's functionality. One concern about these materials, in addition to release of nanoparticles as airborne, is that they can be leached into the aquatic environment. Moreover, water eutrophication could be caused due to the increase in NO₃^- as a product of the photocatalytic oxidation of NOx in runoff. In this paper, a systematic long term campaign assessing these potential side effects in the real outdoor environment has been carried out. Rainwater leachates from 4 m² slabs of 7 different photocatalytic materials exposed outdoors in two different locations (platforms) were collected and analysed over more than 800 days. Ti, NO₃^-, pH and conductivity were analysed. Ti was found in the leachates of almost every material, without a clear relation with the type of application (percolated cementitious slurry, suspension/emulsion or TiO₂ built-in). The highest concentration found was of 60 μg/L, which seems to be rather small when comparing with some threshold values for drinking water. In all the cases, the detected TiO₂ nanoparticles from water leachates were embedded in large microparticle agglomerates coming from the construction material matrix, which are less dangerous than nanoparticles. Nitrates were leached in clear relation with the NOx oxidation photocatalytic performance, and the observed concentrations were not higher than those in the recycled water used by the Madrid City Council to clean the streets.

Environmental transformation of n-TiO2 in the aquatic systems and their ecotoxicity in bivalve mollusks: A systematic review

Over the past decades, titanium dioxide nanoparticles (n-TiO₂) have been extensively used in several industrial applications and the manufacture of novel consumer products. Although strict regulations have been put in place to limit their release into the aquatic environment, these nanoparticles can still be found at elevated levels within the environment, which can result in toxic effects on exposed organisms and has possible implications in term of public health. Bivalve mollusks are a unique and ideal group of shellfish for the study and monitoring the aquatic pollution by n-TiO₂ because of their filter-feeding behaviour and ability to accumulate toxicants in their tissues. In these animals, exposure to n-TiO₂ leads to oxidative stress, immunotoxicity, neurotoxicity, and genotoxicity, as well as behavioral and physiological changes. This review summarizes the uptake, accumulation, and fate of n-TiO₂ in aquatic environments and the possible interactions between n-TiO₂ and other contaminants such as heavy metals and organic pollutants. Moreover, the toxicological impacts and mechanisms of action are discussed for a wide range of bivalve mollusks. This data underlines the pressing need for additional knowledge and future research plans for the development of control strategies to mitigate the release of n-TiO₂ to the aquatic environment to prevent the toxicological impacts on bivalves and protect public health.

Effects of the application of an organic amendment and nanoscale zero-valent iron particles on soil Cr(VI) remediation

Chromium is considered an environmental pollutant of much concern whose toxicity depends, to a great extent, on its valence state, with Cr(VI) being more soluble, bioavailable, and toxic, compared to Cr(III). Nanoremediation is a promising strategy for the remediation of metal pollutants by changing their valence state. However, among other aspects, its effectiveness for soil remediation is seriously hampered by the interaction of nanoparticles with soil organic matter. In this study, soil was (i) amended with two doses of a municipal solid organic waste and (ii) artificially polluted with 300 mg Cr(VI) kg-1 DW soil. After a period of aging, a nanoremediation treatment with nanoscale zero-valent iron particles (1 g nZVI kg-1 DW soil) was applied. The efficiency of the remediation treatment was assessed in terms of Cr(VI) immobilization and recovery of soil health. The presence of the organic amendment caused (i) a decrease of redox potential, (ii) Cr(VI) immobilization via its reduction to Cr(III), (iii) a stimulation of soil microbial communities, and (iv) an improvement of soil health, compared to unamended soil. By contrast, nZVI did not have any impact on Cr(VI) immobilization nor on soil health. It was concluded that, unlike the presence of the organic amendment, nanoremediation with nZVI was not a valid option for soils polluted with Cr(VI) under our experimental conditions.

Additive interactions of nanoparticulate ZnO with copper, manganese and iron in Pisum sativum L., a hydroponic study

Widespread occurrence of ZnO nanoparticles in environment follows the growing number of applications either in technology or agriculture. The impact of five forms of nanoparticulate ZnO on copper, manganese and iron uptake by Pisum sativum L. cultivated in Hoagland solutions was investigated. Plants were collected after twelve days of zinc administration. Effect of bulk ZnO has also been studied. Initial zinc concentration was 100 mg L^-1. Nanoparticles were characterized by the Transmission Electron Microscopy, Dynamic Light Scattering and Zeta potential measurements. Metal contents were analyzed using the Atomic Absorption Spectrometry with flame atomization for samples digested in a microwave closed system. Analysis of variance indicated that zinc species at either molecular or nanoscale levels altered Cu, Mn and Fe uptake and their further transport in pea plants. In particular, significant reduction of Mn and Fe combined with the Cu increase was observed. Additive interactions originated by nanoparticles affect the heavy metals uptake and indicate pollutants migration pathways in plants. Unfortunately, regulations for the plant cultivation were formulated when anthropogenic nanoparticles were not in common use. They underestimate complexity of metals interactions in either plant or habitat. Our results indicate that these additive interactions cannot be neglected and deserve further investigations.

The preparation of a difunctional porous β-tricalcium phosphate scaffold with excellent compressive strength and antibacterial properties

Porous β-tricalcium phosphate (β-Ca3(PO4)2, β-TCP) scaffolds are widely applied in the field of bone tissue engineering due to their nontoxicity, degradability, biocompatibility, and osteoinductivity. However, poor compressive strength and a lack of antibacterial properties have hindered their clinical application. In order to address these disadvantages, graphene (G) and silver nanoparticles were introduced into β-TCP through a two-step method. In the synthesis process, G-β-TCP was prepared via an in situ synthesis method, and then silver nanoparticles and HAp particles were coated on the surface of the G-β-TCP scaffold in an orderly fashion using dopamine as a binder. From the results of characterization, when the content of graphene was 1 wt% of β-TCP, the G-β-TCP scaffold had the highest compression strength (127.25 MPa). And core-shell G-β-TCP-Ag-HAp not only had reduced cytotoxicity via the continuous release of Ag+, but it also achieved long-term antibacterial properties. Besides, the material still showed good cell activity and proliferation.

Sustainable Synthesis of Nanoscale Zerovalent Iron Particles for Environmental Remediation

Nanoscale zerovalent iron (nZVI) particles represent an important material for diverse environmental applications because of their exceptional electron-donating properties, which can be exploited for applications such as reduction, catalysis, adsorption, and degradation of a broad range of pollutants. The synthesis and assembly of nZVI by using biological and natural sustainable resources is an attractive option for alleviating environmental contamination worldwide. In this Review, various green synthesis pathways for generating nZVI particles are summarized and compared with conventional chemical and physical methods. In addition to describing the latest environmentally benign methods for the synthesis of nZVI, their properties and interactions with diverse biomolecules are discussed, especially in the context of environmental remediation and catalysis. Future prospects in the field are also considered.

Promises and potential of in situ nano-phytoremediation strategy to mycorrhizo-remediate heavy metal contaminated soils using non-food bioenergy crops (Vetiver zizinoides & Cannabis sativa)

Heavy metals (HMs) in soil, air, and water environments effect human health. These HMs cannot be degraded in soil and they can only be transformed from one state to another. Food and energy resources such as coal, oil, petrol, etc. are gradually diminishing due to ever increasing demand and consumption, world faces crisis. There is an urgent need to address these problems by reclaiming the waste/polluted land for food and energy production. Various physicochemical remediation strategies are being proposed, developed, and tested but they are all very costly and only applicable to small contaminated sites. During the past two decades or so, plant-based phytoremediation technology is rapidly evolving as a promising new tool to address the issue with the potential to remediate HM contaminated soils in a sustainable manner. Plants, labeled as phyto-tolerant or phyto-accumulators, surviving on such contaminated soils reduce the toxicity by preventing their translocation or destroying the contaminants by sequestration by synthesizing thiol-containing HM-binding proteins (nano-molecules) and peptides (phytochelators or PCs) which modulate internal levels of metal concentration between deficient and toxic levels. But such plants are very slow growing, producing small biomass, and the process taking a long time to effectively remediate such soils. To overcome limitations of using such plants, plants capable of high biomass production and tolerating multiple HMs, such as non-food bioenergy crops (Vetiver and Hamp), are required. This plant-based remediation strategy can further be enhanced with the use of both plants and rhizosphere microbes like arbuscular mycorrhizal fungi (AMF) and plant growth-promoting bacteria. The combination of three components, i.e. high biomass producing plant, soil, and its rhizosphere harboring plant growth-promoting rhizobial (PGPR) microbiota, particularly AMF, will further improve the process of nano-phytoremediation of HM contaminated soils. This mini review focuses on how phytoremediation, nanotechnology, AMF and PGPR technologies can be merged together to form an integrated nano-mycorrhizo-phytoremediation (NMPR) strategy which synergistically achieve the goal of remediation of soil contaminants and improve the phytoremediation performance of bioenergy plants grown on HM polluted soils. This review also identifies the urgent need to conduct field-scale application of this strategy and use it as potential tool for reestablishing plant cover and population diversity during restoration of derelict land post-industrial/mining activities.

Hydrothermal Carbonization as a Strategy for Sewage Sludge Management: Influence of Process Withdrawal Point on Hydrochar Properties

Conventional activated sludge systems, still widely used to treat wastewater, produce large amounts of solid waste that is commonly landfilled or incinerated. This study addresses the potential use of Hydrothermal Carbonization (HTC) to valorize sewage sludge residues examining the properties of hydrochars depending on HTC process conditions and sewage sludge withdrawal point. With increasing HTC severity (process residence time and temperature), solid yield, total Chemical Oxygen Demand (COD) and solid pH decrease while ash content increases. Hydrochars produced from primary (thickened) and secondary (digested and dewatered) sludge show peculiar distinct properties. Hydrochars produced from thickened sludge show good fuel properties in terms of Higher Heating Value (HHV) and reduced ash content. However, relatively high volatile matter and O:C and H:C ratios result in thermal reactivity significantly higher than typical coals. Both series of carbonized secondary sludges show neutral pH, low COD, enhanced phosphorous content and low heavy metals concentration: as a whole, they show properties compatible with their use as soil amendments.

Behavior of Ag species in presence of aquatic sediment minerals - In context of aquatic environmental safety

In recent years, there has been a growth in the number of products containing Ag nanoparticles (AgNPs) in many areas and their use suggests that the water-soil environment may be exposed to the contaminant with different Ag species. Therefore, the sorption of two Ag forms (i.e. Ag(I) ions and nanoparticles - AgNPs) on clay minerals (montmorillonite and kaolinite) and iron (oxyhydr)oxides (ferrihydrite) as a function of solution:mineral ratio (100:1, 250:1, 500:1), solution pH (3.0, 5.5 and 7.0) and initial Ag concentration (0.1-100 mg/dm³) was studied using batch method. In addition the binding strength/mobility of the bonded Ag species was researched. The results show a great sorption potential of clay minerals for both Ag forms and lower sorption capacity of ferrihydrite, in particular for Ag(I) ions. The maximum sorption capacities of montmorillonite, kaolinite and ferrihydrite estimated from three-parameter isotherm model of Sips were 94.39 mg/g, 117.8 mg/g and 26.48 mg/g for AgNPs and 17.92 mg/g, 21.14 mg/g and 3.072 mg/g for Ag(I) ions, respectively. Aggregation process plays an important role in sorption and mobility of AgNPs. The sequential extraction study indicated different binding mechanisms of the Ag forms onto the clay minerals and ferrihydrite, which depended on the active sites of minerals as well as the Ag species nature in the solution. Ag(I) was weakly bound by clay minerals but presence of iron (oxyhydr)oxides decreased the Ag(I) mobility and bioavailability. On the other hand, AgNPs bound with the active centers of minerals in a very strong way and were not able to release into water. The study of the binding of Ag forms by clay minerals and (oxyhydr)oxides allows to determine the influence of their physicochemical and structural properties, including e.g. pore size on Ag sorption. These results allow these properties to be taken into account in the study of environmental samples, including waters and soils. Moreover, the results showed that in the study of behavior of Ag forms in contact with the minerals, in addition to the sorption capacity, the susceptibility to their release is very important. Studies on sorption/desorption of AgNPs and Ag(I) ions as a form of oxidation of AgNPs is important for understanding the transport and fate of the Ag species in soil, sediments and surface water because of different their behavior in contact with the minerals.

Transformation pathways and fate of engineered nanoparticles (ENPs) in distinct interactive environmental compartments: A review

The ever increasing production and use of nano-enabled commercial products release the massive amount of engineered nanoparticles (ENPs) in the environment. An increasing number of recent studies have shown the toxic effects of ENPs on different organisms, raising concerns over the nano-pollutants behavior and fate in the various environmental compartments. After the release of ENPs in the environment, ENPs interact with various components of the environment and undergoes dynamic transformation processes. This review focus on ENPs transformations in the various environmental compartments. The transformation processes of ENPs are interrelated to multiple environmental aspects. Physical, chemical and biological processes such as the homo- or hetero-agglomeration, dissolution/sedimentation, adsorption, oxidation, reduction, sulfidation, photochemically and biologically mediated reactions mainly occur in the environment consequently changes the mobility and bioavailability of ENPs. Physico-chemical characteristics of ENPs (particle size, surface area, zeta potential/surface charge, colloidal stability, and core-shell composition) and environmental conditions (pH, ionic strength, organic and inorganic colloids, temperature, etc.) are the most important parameters which regulated the ENPs environmental transformations. Meanwhile, in the environment, organisms encountered multiple transformed ENPs rather than the pristine nanomaterials due to their interactions with various environmental materials and other pollutants. Thus it is the utmost importance to study the behavior of transformed ENPs to understand their environmental fate, bioavailability, and mode of toxicity.

Metal-based engineered nanoparticles in the drinking water treatment systems: A critical review

The emergence of nanotechnologically-enabled materials, compounds or products inevitably leads to engineered nanoparticles (ENPs) released into surface waters. ENPs have already been detected in wastewater streams, drinking water sources and even in tap water at concentrations in the ng/L and μg/L range, making the latter a potential route for humans. The presence of ENPs in raw waters raises concerns over the possibility that ENPs might pose a hazard to the quality and security of drinking water and whether drinking water treatment plants (DWTPs) are prepared to handle this problem. Therefore, it is essential to critically evaluate if ENPs can be effectively removed through water treatment processes to control environmental and human health risks associated with their release. This review includes a summary of the available information on production, presence, potential hazards to human health and environment, and release and behaviour of metal-based ENPs in surface waters and drinking water. In addition, the most extensively studied water treatment processes to remove metal-based ENPs, specifically conventional and advanced processes, are discussed and highlighted in detail. Furthermore, this work identifies the research gaps regarding ENPs removal in DWTPs and discusses future aspects of ENPs in water treatment.

Uptake, translocation and ligand of silver in Lactuca sativa exposed to silver nanoparticles of different size, coatings and concentration

The broad use of silver nanoparticles (AgNPs) in daily life products enhances their possibilities to reach the environment. Therefore, it is important to understand the uptake, translocation and biotransformation in plants and the toxicological impacts derived from these biological processes. In this work, Lactuca sativa (lettuce) was exposed during 9 days to different coated (citrate, polyvinylpyrrolidone, polyethylene glycol) and sized (60, 75, 100 nm) AgNPs at different concentrations (1, 3, 5, 7, 10, 15 mg L-1). Total silver measurements in lettuce roots indicated that accumulation of AgNPs is influenced by size and concentration, but not by nanoparticle coating. On the other hand, nanosilver translocation to shoots was more pronounced for neutral charged and large sized NPs at higher NP concentrations. Single particle inductively coupled plasma mass spectrometry analysis, after an enzymatic digestion of lettuce tissues indicated the dissolution of some NPs. Ag K-edge X-ray absorption spectroscopy analysis corroborated the AgNPs dissolution due to the presence of less Ag-Ag bonds and appearance of Ag-O and/or Ag-S bonds in lettuce roots. Toxicological effects on lettuces were observed after exposure to nanosilver, especially for transpiration and stomatal conductance. These findings indicated that AgNPs can enter to edible plants, exerting toxicological effects on them.

Phytotoxicity of silver nanoparticles on Vicia faba: Evaluation of particle size effects on photosynthetic performance and leaf gas exchange

Nanotechnology is an emerging field in science and engineering, which presents significant impacts on the economy, society and the environment. The nanomaterials' (NMs) production, use, and disposal is inevitably leading to their release into the environment where there are uncertainties about its fate, behaviour, and toxicity. Recent works have demonstrated that NMs can penetrate, translocate, and accumulate in plants. However, studies about the effects of the NMs on plants are still limited because most investigations are carried out in the initial stage of plant development. The present study aimed to evaluate and characterize the photochemical efficiency of photosystem II (PSII) of broad bean (Vicia faba) leaves when subjected to silver nanoparticles (AgNPs) with diameters of 20, 51, and 73 nm as well as to micrometer-size Ag particles (AgBulk). The AgNPs were characterized by transmission electron microscopy and dynamic light scattering. The analyses were performed by injecting the leaves with 100 mg L^-1 aqueous solution of Ag and measuring the chlorophyll fluorescence imaging, gas exchange, thermal imaging, and reactive oxygen species (ROS) production. In addition, silver ion (Ag⁺) release from Ag particles was determined by dialysis. The results revealed that AgNPs induce a decrease in the photochemical efficiency of photosystem II (PSII) and an increase in the non-photochemical quenching. The data also revealed that AgNPs affected the stomatal conductance (g_s) and CO₂ assimilation. Further, AgNPs induced an overproduction of ROS in Vicia faba leaves. Finally, all observed effects were particle diameter-dependent, increasing with the reduction of AgNPs diameter and revealing that AgBulk caused only a small or no changes on plants. In summary, the results point out that AgNPs may negatively affect the photosynthesis process when accumulated in the leaves, and that the NPs themselves were mainly responsible since negligible Ag⁺ release was detected.

Spinel ferrite nanoparticles and nanocomposites for biomedical applications and their toxicity

This review focuses on the biomedical applications and toxicity of spinel ferrite nanoparticles (SFNPs) with more emphasis on the recently published work. A critical review is provided on recent advances of SFNPs applications in biomedical areas. The novelty of SFNPs in addressing the bottleneck problems encountered in the areas of health; in particular, for diagnosis and treatment of tumour cells are well reviewed. Furthermore, research gaps, toxicity of SFNPs and areas which still need more attention are highlighted. Based on the result of this review, the SFNPs have unlimited capacity in cancer treatment, disease diagnosis, magnetic resonance imaging, drug delivery and release. Overall, stepping out of the conventional way of treatment is difficult but also essential in bringing long lasting solution for cancer and other diseases treatment. In fact, the toxicity study and commercialisation of the SFNPs based cancer treatment options are the main challenges and need further study, in order to reduce unforeseen consequences.

Interaction of silver nanoparticles with mediterranean agricultural soils: Lab-controlled adsorption and desorption studies

The production of silver nanoparticles (AgNPs) has increased tremendously during recent years due to their antibacterial and physicochemical properties. As a consequence, these particles are released inevitably into the environment, with soil being the main sink of disposal. Soil interactions have an effect on AgNP mobility, transport and bioavailability. To understand AgNP adsorption processes, lab-controlled kinetic studies were performed. Batch tests performed with five different Mediterranean agricultural soils showed that cation exchange capacity and electrical conductivity are the main parameters controlling the adsorption processes. The adsorption kinetics of different sized (40, 75, 100 and 200 nm) and coated (citrate, polyvinylpyrrolidone and polyethyleneglycol (PEG)) AgNPs indicated that these nanoparticle properties have also an effect on the adsorption processes. To assess the mobility and bioavailability of AgNPs and to determine if their form is maintained during adsorption/desorption processes, loaded soils were submitted to leaching tests three weeks after batch adsorption studies. The DIN 38414-S4 extraction method indicated that AgNPs were strongly retained on soils, and single-particle inductively coupled plasma mass spectrometry confirmed that silver particles maintained their nanoform, except for 100 nm PEG-AgNPs and 40 nm citrate-coated AgNPs. The DTPA (diethylenetriaminepentaacetic acid) leaching test was more effective in extracting silver, but there was no presence of AgNPs in almost all of these leachates.

Biologically safe colloidal suspensions of naked iron oxide nanoparticles for in situ antibiotic suppression

A category of naked maghemite nanoparticles (γ-Fe₂O₃), named surface active maghemite nanoparticles (SAMNs), is characterized by biological safety, high water colloidal stability and a surface chemistry permitting the binding of ligands. In the present study, the interaction between SAMNs and an antibiotic displaying chelating properties (oxytetracycline, OxyTC) was extensively structurally and magnetically characterized. OxyTC emerged as an ideal probe for providing insights into the colloidal properties of SAMNs. At the same time, SAMNs turned out as an elective tool for water remediation from OxyTC. Therefore, a dilute colloidal suspension of SAMNs was used for the removal of OxyTC in large volume tanks where, to simulate a real in situ application, a population of zebrafish (Danio rerio) was introduced. Interestingly, SAMNs led to the complete removal of the drug without any sign of toxicity for the animal model. Moreover, OxyTC immobilized on SAMNs surface resulted safe for sensitive Escherichia coli bacteria strain. Thus, SAMNs were able to recover the drug and to suppress its antibiotic activity envisaging their feasibility as competitive option for water remediation from OxyTC in more nature related scenarios. The present contribution stimulates the use of novel smart colloidal materials to cope with complex environmental issues.

Silver nanoparticles: An integrated view of green synthesis methods, transformation in the environment, and toxicity

Nowadays, silver nanoparticles (AgNPs) are the most widely used nanoparticles (NPs) in the industry due to their peculiar biocidal features. However, the use of these NPs still runs into limitations mainly because of the low efficiency of environmental friendly synthesis methods and lack of size standardization. When NPs are release in the environment, they can be transformed by oxidation, adsorption or aggregation. These modification shows a dual role in toxic response of AgNPs. The adsorption of natural organic matter from environment on AgNPs, for example, can decrease their toxicity. Otherwise oxidation occurred in the environment is also able to increase the release of toxic Ag⁺ from NPs. Thus, the current review proposes an integrated approach of AgNP synthetic methods using bacteria, fungi, and plants, AgNP cytotoxic and genotoxic effects as well as their potential therapeutic applications are also presented.

In the Search for Nanospecific Effects of Dissolution of Metallic Nanoparticles at Freshwater-Like Conditions: A Critical Review

Knowledge on relations between particle properties and dissolution/transformation characteristics of metal and metal oxide nanoparticles (NPs) in freshwater is important for risk assessment and product development. This critical review aims to elucidate nanospecific effects on dissolution of metallic NPs in freshwater and similar media. Dissolution rate constants are compiled and analyzed for NPs of silver (Ag), copper (Cu), copper oxide/hydroxide (CuO, Cu(OH)₂), zinc oxide (ZnO), manganese (Mn), and aluminum (Al), showing largely varying (orders of magnitude) constants when modeled using first order kinetics. An effect of small primary sizes (<15 nm) was observed, leading to increased dissolution rate constants and solubility in some cases. However, the often extensive particle agglomeration can result in reduced nanospecific effects on dissolution and also an increased uncertainty related to the surface area, a parameter that largely influence the extent of dissolution. Promising ways to model surface areas of NPs in solution using fractal dimensions and size distributions are discussed in addition to nanospecific aspects related to other processes such as corrosion, adsorption of natural organic matter (NOM), presence of capping agents, and existence of surface defects. The importance of the experimental design on the results of dissolution experiments of metal and metal oxide NPs is moreover highlighted, including the influence of ionic metal solubility and choice of particle dispersion methodology.

Stimulated Adsorption of Humic Acids on Capped Plasmonic Ag Nanoparticles Investigated by Surface-Enhanced Optical Techniques

The adsorption of humic substances on Ag nanoparticles (AgNPs) is of crucial environmental importance and determines the toxicity of these NPs and the structure of adsorbed organic matter. In this work, the adsorption of two standard soil and leonardite International Humic Substances Society humic acids was studied on AgNPs of different sizes, shapes (spherical and star-like), and interfacial chemical compositions. Surface-enhanced optical (Raman and fluorescence) spectroscopies were used to follow the specific chemical groups involved in this adsorption. By means of the latter optical techniques, information regarding the binding mechanism and the macromolecular aggregation can be deduced. The influence of the surface chemical composition induced by the different functionalizations of the interfaces of these NPs is highly important regarding the chemical interactions of these complex organic macromolecules. The surface functionalization with positively charged alkyl diamines led to a large increase in the adsorption as well as a strong structural rearrangement of the macromolecule once adsorbed onto the surface.