Discovery and biocatalytic characterization of opine dehydrogenases by metagenome mining

Enzymatic processes play an increasing role in synthetic organic chemistry which requires the access to a broad and diverse set of enzymes. Metagenome mining is a valuable and efficient way to discover novel enzymes with unique properties for biotechnological applications. Here, we report the discovery and biocatalytic characterization of six novel metagenomic opine dehydrogenases from a hot spring environment (mODHs) (EC 1.5.1.X). These enzymes catalyze the asymmetric reductive amination between an amino acid and a keto acid resulting in opines which have defined biochemical roles and represent promising building blocks for pharmaceutical applications. The newly identified enzymes exhibit unique substrate specificity and higher thermostability compared to known examples. The feature that they preferably utilize negatively charged polar amino acids is so far unprecedented for opine dehydrogenases. We have identified two spatially correlated positions in their active sites that govern this substrate specificity and demonstrated a switch of substrate preference by site-directed mutagenesis. While they still suffer from a relatively narrow substrate scope, their enhanced thermostability and the orthogonality of their substrate preference make them a valuable addition to the toolbox of enzymes for reductive aminations. Importantly, enzymatic reductive aminations with highly polar amines are very rare in the literature. Thus, the preparative-scale enzymatic production, purification, and characterization of three highly functionalized chiral secondary amines lend a special significance to our work in filling this gap. KEY POINTS: • Six new opine dehydrogenases have been discovered from a hot spring metagenome • The newly identified enzymes display a unique substrate scope • Substrate specificity is governed by two correlated active-site residues.

Recent advances in microbial synthesis of free heme

Heme is an iron-containing porphyrin compound widely used in the fields of healthcare, food, and medicine. Compared to animal blood extraction, it is more advantageous to develop a microbial cell factory to produce heme. However, heme biosynthesis in microorganisms is tightly regulated, and its accumulation is highly cytotoxic. The current review describes the biosynthetic pathway of free heme, its fermentation production using different engineered bacteria constructed by metabolic engineering, and strategies for further improving heme synthesis. Heme synthetic pathway in Bacillus subtilis was modified utilizing genome-editing technology, resulting in significantly improved heme synthesis and secretion abilities. This technique avoided the use of multiple antibiotics and enhanced the genetic stability of strain. Hence, engineered B. subtilis could be an attractive cell factory for heme production. Further studies should be performed to enhance the expression of heme synthetic module and optimize the expression of heme exporter and fermentation processes, such as iron supply. KEY POINTS: • Strengthening the heme biosynthetic pathway can significantly increase heme production. • Heme exporter overexpression helps to promote heme secretion, thereby further promoting excessive heme synthesis. • Engineered B. subtilis is an attractive alternative for heme production.

Atomically dispersed copper-zinc dual sites anchored on nitrogen-doped porous carbon toward peroxymonosulfate activation for degradation of various organic contaminants

Single-atom catalysts (SACs) have been widely studied in Fenton-like reactions, wherein their catalytic performance could be further enhanced by adjusting electronic structure and regulating coordination environment, although relevant research is rarely reported. This text elucidates fabrication of dual atom catalyst systems aimed at augmenting their catalytic efficiency. Herein, atomically dispersed copper-zinc (Cu-Zn) dual sites anchored on nitrogen (N)-doped porous carbon (NC), referred to as CuZn-NC, were synthesized using cage-encapsulated pyrolysis and host-guest strategies. The CuZn-NC catalyst exhibited high activity in activation of peroxymonosulfate (PMS) for degradation of organic pollutants. Based on synergistic effects of adjacent Cu and Zn atom pairs, CuZn-NC (PMS) system achieved 94.44 % bisphenol A (BPA) degradation in 24 min. The radical pathway predominated, and coexistence of non-radical species was demonstrated for BPA degradation in CuZn-NC/PMS system. More importantly, CuZn-NC/PMS system showed generality for degradation of various refractory contaminants. Our experiments indicate that CuZn-N sites on CuZn-NC act as active sites for bonding PMS molecules with optimal binding energy, while pyrrolic N sites are considered as adsorption sites for organic molecules. Overall, this research designs diatomic site catalysts (DACs), with promising implications for wastewater treatment.

Rational design of Fe, N co-doped porous carbon derived from conjugated microporous polymer as an electrocatalytic platform for oxygen reduction reaction

Porous iron-nitrogen-doped carbons (FeNC) offer a great platform for construction of cathodic oxygen reduction reaction (ORR) catalysts in fuel cells. However, challenges still remain regarding with the collapse of carbon-skeleton during pyrolysis, uneven distribution of active sites and aggregation of metal atoms. In this work, we synthesized Fe, N co-doped conjugated microporous polymer (FeN-CMP) through a facile bottom-up strategy using 1,3,5-triethynylbenzene and iron-chelated 3,8-dibromo-1,10-phenanthroline as monomers, ensuring the uniform coordination of N with Fe element in network. Then, the resulting FeN-CMP was treated by pyrolysis without structural collapse to obtain porous FeNC electrocatalyst for ORR. The most active catalyst was fabricated under 900 °C, which exhibits remarkable ORR activity in alkaline medium with half-wave potential of 0.796 V (18 mV and 105 mV positive deviation from the commercial Pt/C catalyst and post-doping catalyst), high selectivity with nearly 4e- transfer process and excellent methanol tolerance. Our study first developed porous FeNC electrocatalysts derived from Fe, N-anchoring CMPs based on pre-functionalization of monomers, which exhibits great potential as an alternative to commercial Pt/C catalyst for ORR, and provides a feasible strategy of developing multi-atoms doping catalysts for energy storage and conversion as well as heterogeneous catalysis.

Construction of 2D/2D ZnIn2S4/Nb2CTx (MXene) hybrid with hole transport highway and active facet exposure boost photocatalytic hydrogen evolution

In this study, leveraging the tunable surface groups of MXene, the two-dimensional (2D) Nb2CTx with OH terminal (NC) was synthesized. 2D ZnIn2S4 (ZIS) nanosheets were prepared with the aid of sodium citrate, enhancing the exposure ratio of active (110) facet. On this basis, 2D/2D ZnIn2S4/Nb2CTx heterojunctions were fabricated to improve photocatalytic hydrogen evolution reaction (HER) performance. The optimized 6 wt%Nb2CTx/ZnIn2S4-450 (6NC/ZIS-450) photocatalyt exhibits a remarkable HER rate of 3603 μmol g-1h-1, which is 10 times superior to that of the original ZnIn2S4. Its apparent quantum efficiency (AQE) at 380 nm reaches 14.9 %. Meanwhile, even after 5 rounds of HER, the activity of 2D/2D ZnIn2S4/Nb2CTx heterojunction remained at 90 %, far superior to that of pure ZnIn2S4 (34 % and 31 %). Energy band structure analysis and density functional theory (DFT) calculation indicate that Nb2CTx adsorbed with OH exhibit a low work function. By serving as a hole cocatalyst, it effectively boosts the photocatalytic HER rate of ZnIn2S4/Nb2CTx heterojunction and inhibits the photocorrosion of ZnIn2S4. This unique insight, via hole transport highways and increased exposure of active facets, effectively enhances the activity and stability of sulfides photocatalysts.

Repairable body-centered cubic Fe0 anchoring on porous hollow nitrogen-doped carbon spheres with adjusting electron distribution for efficient electrocatalytic ammonia synthesis

Electrocatalytic nitrogen reduction reaction (ENRR) is a promising and efficient method for ammonia production. However, ENRR is restricted by the adsorption and activation of N2. Herein, an efficient nitrogen reduction reaction (NRR) electrocatalyst loaded with zero valent iron (ZVI) particles onto porous nitrogen-doped carbon (NC) hollow spheres is reported. The optimal Fe@10N3C-950 exhibits excellent performance with high ammonia (NH3) yield (152.28 µg h-1 mgcat-1) and Faradaic efficiency (FE, 54.55 %) at - 0.3 V (versus reversible hydrogen electrode, vs. RHE). Bader charge shows that the adsorbed N2 acquires more electrons from Fe sites with body-centered cubic (BCC) structure to better activate N2. Moreover, i-t experiments are performed before electrocatalytic NH3 production to effectively eliminate the effect of oxidation on ZVI and thus, maintain high ENRR activity for Fe@10N3C-950. Theoretical calculations indicate that nitrogen doping not only reduces the Gibbs free energy of rate determining step (RDS), but the BCC-structured Fe can also decrease the energy barriers of N2 activation and RDS.

Single-atom Mn sites confined into hierarchically porous core-shell nanostructures for improved catalysis of oxygen reduction

Applications of zinc-air batteries are partially limited by the slow kinetics of oxygen reduction reaction (ORR); Thus, developing effective strategies to address the compatibility issue between performance and stability is crucial, yet it remains a significant challenge. Here, we propose an in situ gas etching-thermal assembly strategy with an in situ-grown graphene-like shell that will favor Mn anchoring. Gas etching allows for the simultaneous creation of mesopore-dominated carbon cores and ultrathin carbon layer shells adorned entirely with highly dispersed Mn-N4 single-atom sites. This approach effectively resolves the compatibility issue between activity and stability in a single step. The unique core-shell structure allows for the full exposure of active sites and effectively prevents the agglomerations and dissolution of Mn-N4 sites in cores. The corresponding half-wave potential for ORR is up to 0.875 V (vs. reversible hydrogen electrode (RHE)) in 0.1 M KOH. The gained catalyst (Mn-N@Gra-L)-assembled zinc-air battery has a high peak power density (242 mW cm-2) and a durability of ∼ 115 h. Furthermore, replacing the zinc anode achieved a stable cyclic discharge platform of ∼ 20 h at varying current densities. Forming more fully exposed and stable existing Mn-N4 sites is a governing factor for improving the electrocatalytic ORR activity, significantly cycling durability, and reversibility of zinc-air batteries.

Enhancing electrochemical water-splitting efficiency with superaerophobic nickel-coated catalysts on Chinese rice paper

The quest for efficient hydrogen production highlights the need for cost-effective and high-performance catalysts to enhance the electrochemical water-splitting process. A significant challenge in developing self-supporting catalysts lies in the high cost and complex modification of traditional substrates. In this study, we developed catalysts featuring superaerophobic microstructures engineered on microspherical nickel-coated Chinese rice paper (Ni-RP), chosen for its affordability and exceptional ductility. These catalysts, due to their microspherical morphology and textured surface, exhibited significant superaerophobic properties, substantially reducing bubble adhesion. The nickel oxy-hydroxide (NiOxHy) and phosphorus-doped nickel (PNi) catalysts on Ni-RP demonstrated effective roles in oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), achieving overpotentials of 250 mV at 20 mA cm-2 and 87 mV at -10 mA cm-2 in 1 M KOH, respectively. Moreover, a custom water-splitting cell using PNi/Ni-RP and NiOxHy/Ni-RP electrodes reached an impressive average voltage of 1.55 V at 10 mA cm-2, with stable performance over 100 h in 1 M KOH. Our findings present a cost-effective, sustainable, and easily modifiable substrate that utilizes superaerophobic structures to create efficient and durable catalysts for water splitting. This work serves as a compelling example of designing high-performance self-supporting catalysts for electrocatalytic applications.

Vapor deposition strategy for implanting isolated Fe sites into papermaking nanofibers-derived N-doped carbon aerogels for liquid Electrolyte-/All-Solid-State Zn-Air batteries

Single-atom catalysts (SACs), with precisely controlled metal atom distribution and adjustable coordination architecture, have gained intensive concerns as efficient oxygen reduction reaction (ORR) electrocatalysts in Zn-air batteries (ZAB). The attainment of a monodispersed state for metallic atoms anchored on the carbonaceous substrate remains the foremost research priority; however, the persistent challenges lie in the relatively weak metal-support interactions and the instability of captured single atom active sites. Furthermore, in order to achieve rapid transport of O2 and other reactive substances within the carbon matrix, manufacturing SACs based on multi-stage porous carbon substrates is highly anticipated. Here, we propose a methodology for the fabrication of carbon aerogels (CA)-supported SACs utilizing papermaking nanofibers, which incorporates advanced strategies for N-atom self-doping, defect/vacancy introduction, and single-atom interface engineering. Specifically, taking advantages of using green and energy-efficient feedstocks, combining with a direct pore-forming template volatilization and chemical vapor deposition approach, we successfully developed N-doped carbon aerogels immobilized with separated iron sites (Fe-SAC@N/CA-Cd). The obtained Fe-SAC@N/CA-Cd exhibited substantially large specific surface area (SBET = 1173 m2/g) and a multi-level pore structure, which can effectively mitigate the random aggregation of Fe atoms during pyrolysis. As a result, it demonstrated appreciable activity and stability in catalyzing the ORR progress (E1/2 = 0.88 V, Eonset = 0.96 V). Furthermore, the assembled liquid electrolyte-state Zn-air batteries (LES-ZAB) and all-solid-state Zn-air battery (ASS-ZAB) also provides encouraging performance, with a peak power density of 169 mW cm-2 for LES-ZAB and a maximum power density of 124 mW cm-2 for ASS-ZAB.

Encapsulating fullerene into Ti-based metal-organic frameworks with anchored atomically dispersed Pt cocatalysts for efficient hydrogen evolution

Ti-based Metal-organic frameworks (Ti-MOF) have been extensively investigated for producing hydrogen via solar water splitting, while their intrinsic activities are still retarded by the poor performance of photocarriers separation and utilization. Herein, a donor-acceptor (D-A) supramolecular photocatalyst is successfully constructed via encapsulating fullerene (C60) into MIL-125-NH2 and meanwhile depositing individual Pt atoms as cocatalyst. The as-prepared C60@MIL-125-NH2-Pt exhibits remarkable activity in photocatalytic water splitting, with a H2 formation rate of 1180 μmol g-1 h-1, which is ∼ 12 times higher than that of the pristine MIL-125-NH2. Further investigations indicate that the host-guest interactions between C60 and MIL-125-NH2 strengthen the built-in electric field, which greatly facilitates the separation and migration of photogenerated charge carriers. In addition, the cocatalyst of individual Pt atoms not only further promotes the separation and transport of carriers but also enhances the contact between water and the catalyst. All of these factors directly contribute to the superior activity of C60@MIL-125-NH2-Pt. This work provides a new perspective for constructing D-A supramolecular photocatalysts for enhanced charge separation and making full use of photoelectrons to realize efficient hydrogen production.

Single-atom nanozymes for antibacterial applications

Bacteria have always been a thorny problem that threatens human health and food safety. Conventional antibiotic treatment often leads to the emergence of drug resistance. Therefore, the development of more effective antibacterial agents is urgently needed. Single-atom nanozymes (SAzymes) can efficiently eliminate bacteria due to their high atomic utilization, abundant active centers, and good natural enzyme mimicry, providing a potential alternative choice for antibiotics in antibacterial applications. Here, the antibacterial applications of SAzymes are reviewed and their catalytic properties are discussed from the aspects of active sites, coordination environment regulation and carrier selection. Then, the antibacterial effect of SAzymes is elaborated in combination with photothermal therapy (PTT) and sonodynamic therapy (SDT). Finally, the problems faced by SAzymes in antibacterial applications and their future development potential are proposed.

Sustainable double-synergistic silver-hydroxyapatite composite catalyst derived from fish bones for efficient disinfection of Vibrio parahaemolyticus

Vibrio parahaemolyticus is a food-borne pathogen that poses a serious threat to seafood safety and human health. An efficient, nontoxic, and sustainable disinfection material with a stable structure is urgently needed. Herein, silver (Ag)-hydroxyapatite (HAP) composite catalysts were prepared using HAP derived from waste fish bones. The Ag2.50%-HAP showed a 100% disinfection rate against V. parahaemolyticus, disinfecting nearly 7.0 lg CFU mL-1 within 15 min at a low concentration of 300 μg mL-1. This efficient disinfection activity could be attributed to the double-synergistic effect of Ag and superoxide radicals, which resulted in the destruction of bacterial cell structures and the leakage of intracellular proteins. Importantly, the composite also exhibited high activity in controlling the growth of pathogens during the storage process of Penaeus vannamei. These findings provided sustainable composite catalysts for disinfecting V. parahaemolyticus in seafood and a high-value utilization strategy for waste fish bones.

A high oxidase-like activity, bimetallic single-atom nanozyme FeCe/NC prepared by FeCe-ZIF-8 approach for sensing tannic acid in tea

To improve the activity of single-atom nanozymes (SAzymes) for applications in food analysis, a new bimetal SAzyme FeCe/NC was developed. Its oxidase-like activity is 40% higher than that of single metal SAzyme Fe/NC. Based on a series of characterization investigations, the catalytic mechanism is that it directly catalyzed O2 to generate •OH, O2 •-and 1O2. It could directly catalyze oxidation 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxTMB, thereunder, a FeCe/NC SAzyme-TMB colorimetric method for the detection of tannic acid (TA) was constructed after the optimization of catalytic conditions. The method has a high R2 of 0.995, a low limit of detection (LOD) of 0.26 μmol/L, and high stability. The detection performance was validated by the real samples (tea). Therefore, the prepared bimetallic SAzyme FeCe/NC can be applied for TA detection without the addition of H2O2, and will have broad applications in the areas of food, feed, and life science.

Rational design of molecularly imprinted electrochemical sensor based on Nb2C-MWCNTs heterostructures for highly sensitive and selective detection of Ochratoxin a

Developing an efficient method for screening Ochratoxin A (OTA) in agriculture products is vital to ensure food safety and human health. However, the complex food matrix seriously affects the sensitivity and accuracy. To address this issue, we designed a novel molecularly imprinted polymer (MIP) electrochemical sensor based on multiwalled carbon nanotube-modified niobium carbide (Nb2C-MWCNTs) with the aid of the density functional theory (DFT). In this design, a glassy carbon electrode (GCE) was first modified by Nb2C-MWCNTs heterostructure. Afterward, the MIP layer was prepared, with ortho-toluidine as a functional monomer selected via DFT and OTA acting as a template on the surface of Nb2C-MWCNTs/GCE using in-situ electropolymerization. Electrochemical tests and physical characterization revealed that Nb2C-MWCNTs improved the sensor's active surface area and electron transmission capacity. Nb2C-MWCNTs had a good synergistic effect on MIP, endowing the sensor with high sensitivity and specific recognition of OTA in complex food matrix systems. The MIP sensor showed a wide linear range from 0.04 to 10.0 μM with a limit of detection (LOD) of 3.6 nM. Moreover, it presented good repeatability and stability for its highly antifouling effect on OTA. In real sample analysis, the recoveries, ranging from 89.77% to 103.70%, agreed well with the results obtained by HPLC methods, suggesting the sensor has good accuracy and high potential in practical applications.

Engineering antibonding orbital occupancy of NiMoO4-supported Ru nanoparticles for enhanced chlorine evolution reaction

Chlorine evolution reaction (CER) is crucial for industrial-scale production of high-purity Cl2. Despite the development of classical dimensionally stable anodes to enhance CER efficiency, the competitive oxygen evolution reaction (OER) remains a barrier to achieving high Cl2 selectivity. Herein, a binder-free electrode, Ru nanoparticles (NPs)-decorated NiMoO4 nanorod arrays (NRAs) supported on Ti foam (Ru-NiMoO4/Ti), was designed for active CER in saturated NaCl solution (pH = 2). The Ru-NiMoO4/Ti electrode exhibits a low overpotential of 20 mV at 10 mA cm-2 current density, a high Cl2 selectivity exceeding 90%, and robust durability for 90h operation. The marked difference in Tafel slopes between CER and OER indicates the high Cl2 selectivity and superior reaction kinetics of Ru-NiMoO4/Ti electrode. Further studies reveal a strong metal-support interaction (SMSI) between Ru and NiMoO4, facilitating electron transfer through the Ru-O bridge bond and increasing the Ru 3d-Cl 2p antibonding orbital occupancy, which eventually results in weakened Ru-Cl bonding, promoted Cl desorption, and enhanced Cl2 evolution. Our findings provide new insights into developing electrodes with enhanced CER performance through antibonding orbital occupancy engineering.

Iodine-doped carbon nanotubes boosting the adsorption effect and conversion kinetics of lithium-sulfur batteries

Compared with lithium-ion batteries (LIBs), lithium-sulfur batteries (LSBs), based on electrochemical reactions involving multi-step 16-electron transformations provide higher specific capacity (1672 mAh g-1) and specific energy (2600 Wh kg-1), exhibiting great potential in the field of energy storage. However, the inherent insulation of sulfur, slow electrochemical reaction kinetics and detrimental shuttle-effect of lithium polysulfides (LiPSs) restrict the development of LSBs in practical applications. Herein, the iodine-doped carbon nanotubes (I-CNTs) is firstly reported as sulfur host material to the enhance the adsorption-conversion kinetics of LSBs. Iodine doping can significantly improve the polarity of I-CNTs. Iodine atoms with lone pair electrons (Lewis base) in iodine-doped CNTs can interact with lithium cations (Lewis acidic) in LiPSs, thereby anchoring polysulfides and suppressing subsequent shuttling behavior. Moreover, the charge transfer between iodine species (electron acceptor) and CNTs (electron donor) decreases the gap band and subsequently improves the conductivity of I-CNTs. The enhanced adsorption effect and conductivity are beneficial for accelerating reaction kinetics and enhancing electrocatalytic activity. The in-situ Raman spectroscopy, quasi in-situ electrochemical impedance spectroscopy (EIS) and Li2S potentiostatic deposition current-time (i-t) curves were conducted to verify mechanism of complex sulfur reduction reaction (SRR). Owing to above advantages, the I-CNTs@S composite cathode exhibits an ultrahigh initial capacity of 1326 mAh g-1 as well as outstanding cyclicability and rate performance. Our research results provide inspirations for the design of multifunctional host material for sulfur/carbon composite cathodes in LSBs.

Pt-N catalytic centres concisely enhance interfacial charge transfer in amines functionalized Pt@MOFs for selective conversion of CO2 to CH4

Improving ligand-to-active metal charge transfer (LAMCT) by finely tuning the organic ligand is a decisive strategy to enhance charge transfer in metal organic frameworks (MOFs)-based catalysts. However, in most MOFs loaded with active metal catalysts, electron transmission encounters massive obstacle at the interface between the two constituents owing to poor LAMCT. Herein, amines (-NH2) functionalized MOFs (NH2-MIL-101(Cr)) encapsulated active metal Pt nanoclusters (NCs) catalysts are synthesized by the polyol reduction method and utilized for the photoreduction of CO2. Surprisingly, the introduction of -NH2 (electron donating) groups within the matrix of MIL-101(Cr) improved the electron migration through the LAMCT process, fostering a synergistic interaction with Pt. The combined experimental analysis exposed the high number of metallic Pt (Pt0) in Pt@NH2-MIL-101(Cr) catalyst through seamless electron shuttling from N of -NH2 group to excited Pt generating versatile hybrid Pt-N catalytic centres. Consequently, these versatile hybrid catalytic centres act as electro-nucleophilic centres, which enable the efficient and selective conversion of CO bond in CO2 to harvest CH4 (131.0 µmol.g-1) and maintain excellent stability and selectivity for consecutive five rounds, superior to Pt@MIL-101(Cr) and most reported catalysts. Our study verified that the precise tuning of organic ligands in MOFs immensely improves the surface-active centres, electron migration, and catalytic selectivity of the excited Pt NCs catalysts encaged inside MOFs through an improved LAMCT pathway.

In-situ construction of iron-modified nickel nanoparticles assisted by hexamethylenetetramine with the internal and external collaboration for highly selective electrocatalytic carbon dioxide reduction

Carbon dioxide (CO2) electroreduction provides a sustainable route for realizing carbon neutrality and energy supply. Up to now, challenges remain in employing abundant and inexpensive nickel materials as candidates for CO2 reduction due to their low activity and favorable hydrogen evolution. Here, the representative iron-modified nickel nanoparticles embedded in nitrogen-doped carbon (Ni1-Fe0.125-NC) with the porous botryoid morphology were successfully developed. Hexamethylenetetramine is used as nitrogen-doped carbon source. The collaboration of internal lattice expansion with electron effect and external confinement effect with size effect endows the significant enhancement in electrocatalytic CO2 reduction. The optimized Ni1-Fe0.125-NC exhibits broad potential ranges for continuous carbon monoxide (CO) production. A superb CO Faradaic efficiency (FECO) of 85.0 % realized at -1.1 V maintains a longtime durability over 35 h, which exceeds many state-of-the-art metal catalysts. Theoretical calculations further confirm that electron redistribution promotes the desorption of CO in the process for favorable CO production. This work opens a new avenue to design efficient nickel-based materials by considering the intrinsic structure and external confinement for CO2 reduction.

Cs3Bi2Br9 nanoparticles decorated C3N4 nanotubes composite photocatalyst for highly selective oxidation of benzylic alcohol

Solar-light driven oxidation of benzylic alcohols over photocatalysts endows significant prospects in value-added organics evolution owing to its facile, inexpensive and sustainable process. However, the unsatisfactory performance of actual photocatalysts due to the inefficient charge separation, low photoredox potential and sluggish surface reaction impedes the practical application of this process. Herein, we developed an innovative Z-Scheme Cs3BiBr9 nanoparticles@porous C3N4 tubes (CBB-NP@P-tube-CN) heterojunction photocatalyst for highly selective benzyl alcohol oxidation. Such composite combining increased photo-oxidation potential, Z-Scheme charge migration route as well as the structural advantages of porous tubular C3N4 ensures the accelerated mass and ions diffusion kinetics, the fast photoinduced carriers dissociation and sufficient photoredox potentials. The CBB-NP@P-tube-CN photocatalyst demonstrates an exceptional performance for selective photo-oxidation of benzylic alcohol into benzaldehyde with 19, 14 and 3 times higher benzylic alcohols conversion rate than those of C3N4 nanotubes, Cs3Bi2Br9 and Cs3Bi2Br9@bulk C3N4 photocatalysts, respectively. This work offers a sustainable photocatalytic system based on lead-free halide perovskite toward large scale solar-light driven value-added chemicals production.

A ratiometric fluorescent dark box and smartphone integrated portable sensing platform based on hydrogen bonding induction for on-site determination of enrofloxacin

Enrofloxacin (ENR) residues in animal-derived food and water threaten human health. Simple, low-cost and on-site detection methods are urgently needed. Blue emitting carbon quantum dots (CQDs) and orange rhodamine B (RhB) were used as recognition and reference signals, respectively, to construct a ratiometric fluorescence sensor. After the addition of ENR, the color of the sensor changed from orange to blue because hydrogen bonding induced a considerable increase in CQDs fluorescence. Based on this mechanism, a simple and low cost on-site portable sensing platform was constructed, which integrated a stable UV light strip and a smartphone with voice-controlled phototaking function and an RGB app. The t-test results of spiked ENR recoveries for diluted milk, honey and drinking water revealed no significant differences between the ratiometric fluorescent sensor and portable sensing platform. Thus, this portable sensing platform provides a novel strategy for on-site quantification of quinolone antibiotics in foodstuffs and environmental water.

Sequentially photocatalytic degradation of mussel-inspired polydopamine: From nanoscale disassembly to effective mineralization

Mussel-inspired polydopamine (PDA) coating has been utilized extensively as versatile deposition strategies that can functionalize surfaces of virtually all substrates. However, the strong adhesion, stability and intermolecular interaction of PDA make it inefficient in certain applications. Herein, a green and efficient photocatalytic method was reported to remove adhesion and degrade PDA by using TiO2-H2O2 as photocatalyst. The photodegradation process of the PDA spheres was first undergone nanoscale disassembly to form soluble PDA oligomers or well-dispersed nanoparticles. Most of the disassembled PDA can be photodegraded and finally mineralized to CO2 and H2O. Various PDA coated templates and PDA hollow structures can be photodegraded by this strategy. Such process provides a practical strategy for constructing the patterned and gradient surfaces by the "top-down" method under the control of light scope and intensity. This sequential degradation strategy is beneficial to achieve the decomposition of highly crosslinked polymers.

Boosting photo-thermal co-catalysis CO2 methanation by tuning interface electron transfer via Mott-Schottky heterojunction effect

Photo-thermal co-catalytic reduction of CO2 to synthesize value-added chemicals presents a promising approach to addressing environmental issues. Nevertheless, traditional catalysts exhibit low light utilization efficiency, leading to the generation of a reduced number of electron-hole pairs and rapid recombination, thereby limiting catalytic performance enhancement. Herein, a Mott-Schottky heterojunction catalyst was developed by incorporating nitrogen-doped carbon coated TiO2 supported nickel (Ni) nanometallic particles (Ni/x-TiO2@NC). The optimal Ni/0.5-TiO2@NC sample displayed a conversion rate of 71.6 % and a methane (CH4) production rate of 65.3 mmol/(gcat·h) during photo-thermal co-catalytic CO2 methanation under full-spectrum illumination, with a CH4 selectivity exceeding 99.6 %. The catalyst demonstrates good stability as it shows no decay after two reaction cycles. The Mott-Schottky heterojunction catalysts display excellent efficiency in separating photo-generated electron-hole pairs and elevate the catalysts' temperature, thus accelerating the reaction rate. The in-situ experiments revealed that light-induced electron transfer effectively facilitates H2 dissociation and enhances surface defects, thereby promoting CO2 adsorption. This study introduces a novel approach for developing photo-thermal catalysts for CO2 reduction, aiming to enhance solar energy utilization and facilitate interface electron transfer.

Modulating built-in electric field via Bi-VO4-Fe interfacial bridges to enhance charge separation for efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting on semiconductor electrodes is considered to be one of the important ways to produce clean and sustainable hydrogen fuel, which is a great help in solving energy and environmental problems. Bismuth vanadate (BiVO4) as a promising photoanode for photoelectrochemical water splitting still suffers from poor charge separation efficiency and photo-induced self-corrosion. Herein, we develop heterojunction-rich photoanodes composed of BiVO4 and iron vanadate (FeVO4), coated with nickel iron oxide (NiFeOx/FeVO4/BiVO4). The formation of the interface between BiVO4 and FeVO4 (Bi-VO4-Fe bridges) enhances the interfacial interaction, resulting in improved performance. Meanwhile, high-conductivity FeVO4 and NiFeOx oxygen evolution co-catalysts effectively enhance bulk electron/hole separation, interface water's kinetics and photostability. Concurrently, the optimized NiFeOx/FeVO4/BiVO4 possesses a remarkable photocurrent density of 5.59 mA/cm2 at 1.23 V versus reversible hydrogen electrode (vs RHE) under AM 1.5G (Air Mass 1.5 Global) simulated sunlight, accompanied by superior stability without any decreased of its photocurrent density after 14 h. This work not only reveals the crucial role of built-in electric field in BiVO4-based photoanode during PEC water splitting, but also provides a new guide to the design of efficient photoanode for PEC.

Synthesis of Zr2ON2 via a urea-glass route to modulate the bifunctional catalytic activity of NiFe layered double hydroxide in a rechargeable zinc-air battery

The development of a highly efficient, stable, and low-cost bifunctional catalyst is imperative for facilitating the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). However, significant challenges are involved in extending its applications to rechargeable zinc-air batteries. This study presents a bifunctional catalyst, Zr2ON2@NiFe layered double hydroxide (LDH), that was developed by utilizing a urea-glass route for synthesizing the Zr2ON2 precursor, followed by riveting NiFe LDH nanosheets using a hydrothermal method. Specifically, the vertical distribution of NiFe LDH on the Zr2ON2 surface ensures the maximization of the number of accessible active sites and interfacial catalysis of NiFe LDH. Notably, Zr2ON2@NiFe LDH demonstrates ORR and OER bifunctional electrocatalytic behavior and high stability owing to its heterostructure and composition. Furthermore, a rechargeable zinc-air battery using a Zr2ON2@NiFe LDH electrocatalyst as the air cathode demonstrated a high peak power density (172 mW cm-2) and galvanostatic charge-discharge cycle stability (5 mA cm-2 over 443 h). Thus, this study presents an efficient and cost-effective strategy for the design of bifunctional electrocatalysts.

Small molecule substrates for the rapid quantification of acyl transfer activity of nylon hydrolase NylCA

The widespread use of polyamides such as nylons has led to the accumulation of nylon waste, which is particularly resistant to decomposition due to the intrinsic stability of the amide bond. New methods are required for the true recycling of these waste materials by depolymerization. Enzymes that are capable of hydrolyzing polyamides have been proposed as biocatalysts that may be suitable for this application. NylC is an enzyme that can mediate the hydrolysis of aminohexanoic acid oligomers, and to some extent, bulk polymers. However, current assays to characterize the activity of this enzyme require long reaction times and/or rely on secondary reactions to quantify hydrolysis. Herein, we have designed structurally-optimized small molecule chromogenic esters that serve as substrate analogues for monitoring NylC acyltransferase activity in a continuous manner. This assay can be performed in minutes at room temperature, and the substrate N-acetyl-GABA-pNP ester (kcat = 0.37 s-1, KM = 256 μM) shows selectivity for NylC in complex biological media. We also demonstrate that activity towards this substrate analogue correlates with amide hydrolysis, which is the primary activity of this enzyme. Furthermore, our screening of substrate analogues provides insight into the substrate specificity of NylC, which is relevant to biocatalytic applications.

Pd-induced polarized Cu0-Cu+ sites for electrocatalytic CO2-to-C2+ conversion in acidic medium

The acidic CO2 reduction reaction (CO2RR) offers a promising approach to mitigate CO2 reactant loss and carbonate deposition, which are challenging issues in alkaline or neutral electrolytes. However, the hydrogen evolution reaction (HER) competes in the proton-rich environment near the catalyst surface as a side reaction, reducing the energy efficiency of generating multi-carbon (C2+) products. In this work, we proposed a palladium (Pd) doping strategy in a copper (Cu)-based catalyst to stabilize polarized Cu0-Cu+ sites, thus enhancing the CC coupling step during the CO2RR while suppressing HER. At an optimal doping ratio of 6%, the Pd dopants were well dispersed as single atoms without aggregation, allowing for the stabilization of subsurface oxygen (OSub), preserving the polarized Cu0-Cu+ active sites, and reducing the energy barrier of CC coupling. The Pd-doped Cu/Cu2O catalyst exhibited a peak Faradaic efficiency (FE) of 64.0% for C2+ products with a corresponding C2+ partial current density of 407.1 mA∙cm-2 at -2.18 V versus a reversible hydrogen electrode, a high CO2 single-pass conversion efficiency (SPCE) of 73.2%, as well as a high electrochemical stability of ∼ 150 h at industrially relevant current densities, thus suggesting a potential approach for tuning the electrocatalytic CO2 performances in acidic environments with higher carbon conversion efficiencies.

Design of Mg-Ni binary single-atom catalysts for conversion of carbon dioxide to syngas with a wide tunable ratio: Each species doing its own job or working together to win?

Electrochemical carbon dioxide reduction reaction (eCO2RR) to generate syngas is an appealing strategy for CO2 net reduction. However, it suffers from the inferior faradaic efficiency (FE), selectivity, and difficult modulation of hydrogen/carbon monoxide (H2/CO) ratio. To address these issues, a series of magnesium-nickel (Mg-Ni) dual atomic catalysts with different Ni contents are fabricated on the nitrogen-doped carbon matrix (MgNiX-NC DACs) by one-step pyrolysis. MgNi5-NC electrocatalyst generates 0.51-0.79 H2/CO ratios in a potential range of -0.6 to -1.0 V vs. reversible hydrogen electrode (RHE) and the total FE reaches 100 % with good stability. While a wider range of H2/CO (0.95-4.34) is achieved for MgNi3-NC electrocatalyst in the same overpotential range, which is suitable for typical downstream thermochemical reactions. Introduction of Ni species accelerates the generation of CO, however, there is much less influence on the H2 production as compared with Mg-based single atomic electrocatalyst. According to the experimental results and density functional theory (DFT) calculations, the synergistic effect between Mg and Ni achieves the satisfied results rather than each one fulfill its own duty for selective producing H2 and CO, respectively. This work introduces a feasible approach to develop atomic catalysts on main group metal for more controllable CO2RR.

Mesoporous Cu2O microspheres for highly efficient C2 chemicals production from CO2 electroreduction

Production of C2 chemicals (such as C2H4, C2H5OH, etc.) from CO2 electroreduction reaction (CO2ER) has been regarded as a promising route to solve the environmental problems and energy crisis. In this work, mesoporous Cu2O microspheres of ca. 700 nm diameter size with low crystallinity were fabricated to enable efficient conversion of CO2 to C2 chemicals by electrocatalytic reduction. It is revealed that compared with bulk Cu2O, the obtained mesoporous Cu2O microspheres have larger surface area, more grain boundaries and defects (unsaturated coordination sites), which facilitate the adsorption and stabilization of the important intermediates, such as *CO, on the route to C2 chemicals formation. As a result, the Faraday efficiency (FE) of C2 products reaches as high as 82.6 % and 78.5 % in an H-cell and a flow cell, respectively. In situ Raman and FT-IR spectra reveal that during CO2ER test there exists abundant *CO on the mesoporous Cu2O surface, thus increasing the opportunity of CC coupling. And the high coverage of *CO on catalyst surface during CO2ER protects and stabilizes the oxidation state of Cu species. This work demonstrates an effective strategy to introduce mesoporous structures and decreased crystallinity for improving the performance of CO2ER to C2 products.

V-doped activated Ru/Ti2.5V0.5C2 dual-active center accelerate hydrogen production from ammonia borane

Designing and constructing the active center of Ru-based catalysts is the key to efficient hydrolysis of ammonia borane (NH3BH3, AB) for hydrogen production. Herein, V-doped Ru/Ti2.5V0.5C2 dual-active center catalysts were synthesized, showing excellent catalytic ability for AB hydrolysis. The corresponding turnover frequency value was 1072 min-1 at 298 K, and the hydrolysis rate rB of AB was 235 × 103 mL·min-1·gRu-1. X-ray photoelectron spectroscopy results indicated that the interaction between V-doped Ti3C2 and catalytic metal Ru transfers electrons from Ti to Ru, resulting in electron-rich Ru species. According to density functional theory calculations, the activation energy and reaction dissociation energy of the reactants AB and H2O on V-doped catalysts were lower than those of Ru/Ti3C2, thus optimizing the catalytic kinetics of AB hydrolysis. The modification strategy of V-doped Ti3C2 provides a new pathway for the development of high-performance catalysts for AB hydrolysis.

Multi-scale revealing how real catalyst layer interfaces dominate the local oxygen transport resistance in ultra-low platinum PEMFC

In view of a catalyst layer (CL) with low-Pt causing higher local transport resistance of O2 (Rlocal), we propose a multi-study methodology that combines CO poisoning, the limiting current density method, and electrochemical impedance spectroscopy to reveal how real CL interfaces dominate Rlocal. Experimental results indicate that the ionomer is not evenly distributed on the catalyst surface, and the uniformity of ionomer distribution does not show a positive correlation with the ionomer content. When the ionomer coverage on the supported catalyst surface is below 20 %, the ECSA is only 10 m2·g-1, and the ionomer coverage on the supported catalyst surface reaches 60 %, the ECSA is close to 40 m2·g-1. The ECSA has a positive correlation with ionomer coverage. Because the ECSA is measured by CO poisoning, it can be inferred that the platinum contacted with ionomer can generate effective active sites. Furthermore, a more uniform distribution of ionomer can create additional proton transport channels and reduce the distance for oxygen transport from the catalyst layer bulk to the active sites. A higher ECSA and a shorter distance for oxygen transport will reduce the Rlocal, leading to better performance.

Catalytic hydrodehalogenation activity and selectivity of polyiodinated phenolic disinfection byproducts at ambient conditions

Iodo-phenolic disinfection byproducts (DBPs) widely occur in disinfected water, posing potential risks to human health and the ecosystem as they possess higher toxicity than the bromo- and chloro-analogs. Herein, we elucidated the catalytic hydrodehalogenation (HDH) activity and selectivity of polyiodinated phenolic DBPs on supported noble metal catalysts at ambient conditions. Both 2,4,6-triiodophenol and 4-chloro-2,6-diiodophenol can be efficiently eliminated on Pd/TiO2 and Rh/TiO2 within 20 min, with Pd/TiO2 exhibiting higher turnover frequency. The HDH reactions proceeded in both stepwise and concerted pathways on Pd/TiO2, while they were dominantly stepwise on Rh/TiO2. Experimental results and theoretical calculations revealed that the HDH selectivity depends on the position and the bond energy of halo-substitutions. For the HDH of 2,4,6-triiodophenol, the para-substituted iodine was more favorable to be dehalogenated than the ortho-substituted ones due to the steric hindrance of the hydroxyl group. For the HDH of 4-chloro-2,6-diiodophenol, the ortho-substituted iodine was removed before the para-substituted chlorine as CI bond had higher reactivity than CCl bond. Significant catalyst deactivation was observed for the HDH of 4-chloro-2,6-diiodophenol on Pd/TiO2 due to iodine poisoning, resulting in 4-chlorophenol as the dominant product. In contrast, Rh/TiO2 can completely hydrodehalogenate 4-chloro-2,6-diiodophenol into cyclohexanone with little iodine poisoning. Our results suggest that HDH is an efficient process for abating iodo-phenolic DBPs. Rh/TiO2 is a more promising HDH catalyst for iodinated DBP removal than Pd/TiO2 with excellent resistance to iodine poisoning.

Rational design of bimetallic MBene for efficient electrocatalytic nitrogen reduction

Electrocatalytic nitrogen reduction reaction (NRR) is one of the most promising approaches to achieving green and efficient NH3 production. However, the designs of efficient NRR catalysts with high activity and selectivity still are severely hampered by inherent linear scaling relations among the adsorption energies of NRR intermediates. Herein, the properties of ten M3B4 type MBenes have been initially investigated for efficient N2 activation and reduction to NH3via first-principles calculations. We highlight that Cr3B4 MBene possesses remarkable NRR activity with a record-low limiting potential (-0.13 V). Then, this work proposes descriptor-based design principles that can effectively evaluate the catalytic activity of MBenes, which have been further employed to design bimetallic M2M'B4 MBenes. As a result, 5 promising candidates including Ti2YB4, V2YB4, V2MoB4, Nb2YB4, and Nb2CrB4 with excellent NRR performance have been extracted from 20 bimetallic MBenes. Further analysis illuminates that constructing bimetallic MBenes can selectively tune the adsorption strength of NHNH2** and NH2NH2**, and break the linear scaling relations between their adsorption energies, rendering them ideal for NRR. This work not only pioneers the application of MBenes as efficient NRR catalysts but also proposes rational design principles for boosting their catalytic performance.

Macrophage-Inspired marine antifouling coating with dynamic surfaces based on regulation of dynamic covalent bonds

Macrophages can kill bacteria and viruses by releasing free radicals, which provides a possible approach to construct antifouling coatings with dynamic surfaces that release free radicals if the breaking of dynamic covalent bonds is precisely regulated. Herein, inspired by the defensive behavior of macrophages of releasing free radicals to kill bacteria and viruses, a marine antifouling coating composed of polyurethane incorporating dimethylglyoxime (PUx-DMG) is prepared by precise regulation of dynamic oxime-urethane covalent bonds. The obtained alkyl radical (R·) derived from the cleavage of the oxime-urethane bonds manages to effectively suppress the attachment of marine biofouling. Moreover, the intrinsic dynamic surface makes it difficult for biofouling to adhere and ultimately achieves sustainable antifouling property. Notably, the PU50-DMG coating not only presents efficient antibacterial and antialgae properties, but also prevents macroorganisms from settling in the sea for up to 4 months. This provides a pioneer broad-spectrum strategy to explore the marine antifouling coatings.

Covalent organic frameworks derived Single-Atom cobalt catalysts for boosting oxygen reduction reaction in rechargeable Zn-Air batteries

The design and development of high-performance and long-life Pt-free catalysts for the oxygen reduction reaction (ORR) is of great important with respect to metal-air batteries and fuel cells. Herein, a new low-cost covalent organic frameworks (COFs)-derived CoNC single-atoms catalyst (SAC) is fabricated and compared with the engineered nanoparticle (NP) counterpart for ORR activity. The ORR performance of the SAC catalyst (CoSA@NC) surpasses the NP counterpart (CoNP-NC) under the same operation condition. CoSA@NC also achieves improved long-term durability and better methanol tolerance compared with the Pt/C. The zinc-air battery assembled by the CoSA@NC cathode delivers a higher power density and energy density than that of commercial Pt/C catalyst. Molecular dynamics (MD) is performed to explain the spontaneous evolution from clusters to single-atom metal configuration and density functional theory (DFT) calculations find that CoSA@NC possesses lower d-band center, resulting in weaker interaction between the surface and the O-containing intermediates. Consequently, the reductive desorption of OH*, the rate-determine step, is further accelerated.

Construction and catalysis role of a kinetic promoter based on lithium-insertion technology and proton exchange strategy for lithium-sulfur batteries

The high theoretical energy density and specific capacity of lithium-sulfur (Li-S) batteries have garnered considerable attention in the prospective market. However, ongoing research on Li-S batteries appears to have encountered a bottleneck, with unresolved key technical challenges such as the significant shuttle effect and sluggish reaction kinetics. This investigation explores the catalytic efficacy of three catalysts for Li-S batteries and elucidates the correlation between their structure and catalytic impacts. The results suggest that the combined utilization of lithium-insertion technology and a proton exchange approach for δ-MnO2 can optimize its electronic structure, resulting in an optimal catalyst (H/Li inserted δ-MnO2, denoted as HLM) for the sulfur reduction reaction. The replacement of Mn sites in δ-MnO2 with Li atoms can enhance the structural stability of the catalyst, while the introduction of H atoms between transition metal layers contributes to the satisfactory catalytic performance of HLM. Theoretical calculations demonstrate that the bond length of Li2S4 adsorbed by the HLM molecule is elongated, thereby facilitating the dissociation process of Li2S4 and enhancing the reaction kinetics in Li-S batteries. Consequently, the Li-S battery utilizing HLM as a catalyst achieves a high areal specific capacity of 4.2 mAh cm-2 with a sulfur loading of 4.1 mg cm-2 and a low electrolyte/sulfur (E/S) ratio of 8 μL mg-1. This study introduces a methodology for designing effective catalysts that could significantly advance practical developments in Li-S battery technology.

Edge-oriented growth of cadmium sulfide nanoparticles on nickel metal-organic framework nanosheets for photocatalytic hydrogen evolution

In this study, a directional loading of cadmium sulfide (CdS) nanoparticles (NPs) was achieved on the opposite edges of nickel metal-organic framework (Ni-MOF) nanosheets (NSs) by adjusting the weight ratio of CdS NPs in the reaction process to produce effective visible light photocatalysts. The close contact between the zero-dimensional (0D) and two-dimensional (2D) regions and the matching positions of the bands promoted charge separation and heterojunction formation. The optimal CdS NPs loading of composite material was 40 wt%. At this ratio, CdS NPs grew primarily at the opposite edges of the Ni-MOF NSs rather than on their surfaces. When lactic acid was used as the sacrificial agent, the hydrogen production rate of the 40 %-CdS/Ni-MOF heterojunction under visible light irradiation was 19.6 mmol h-1 g-1, making a 20-fold enhancement compared to the original CdS NPs sample (1.0 mmol h-1 g-1). The charge carriers generated in CdS NPs were transferred to Ni-MOF NSs through heterojunctions, where Ni-MOF NSs also served as cocatalysts to improve hydrogen production. The combination of the two materials improved the light absorption ability. In particular, the 40 %-CdS/Ni-MOF heterojunction exhibited good photostability, effectively preventing the photocorrosion of CdS NPs. This study introduces an approach for constructing efficient and stable photocatalysts for visible light-driven photocatalytic hydrogen production.

Alternative proton exchange membrane based on a bicomponent anionic nanocellulose system

As integral parts of fuel cells, polymer electrolyte membranes (PEM) facilitate the conversion of hydrogen's chemical energy into electricity and water. Unfortunately, commercial PEMs are associated with high costs, limited durability, variable electrochemical performance and are based on perfluorinated polymers that persist in the environment. Nanocellulose-based PEMs have emerged as alternative options given their renewability, thermal and mechanical stability, low-cost, and hydrophilicity. These PEMs take advantage of the anionic nature of most nanocelluloses, as well as their facile modification with conductive functional groups, for instance, to endow ionic and electron conductivity. Herein, we incorporated for the first time two nanocellulose types, TEMPO-oxidized and sulfonated, to produce a fully bio-based PEM and studied their contribution separately and when mixed in a PEM matrix. Sulfonated nanocellulose-based PEMs are shown to perform similarly to commercial and bio-based membranes, demonstrating good thermal-oxidative stability (up to 190 °C), mechanical robustness (Young's modulus as high as 1.15 GPa and storage moduli >13 GPa), and high moisture-uptake capacity (ca. 6330 % after 48 h). The introduced nanocellulose membranes are shown as promising materials for proton-exchange material applications, as required in fuel cells.

Ba2+-doping introduced piezoelectricity and efficient Ultrasound-Triggered bactericidal activity of brookite TiO2 nanorods

Exploring highly efficient ultrasound-triggered catalysts is pivotal for various areas. Herein, we presented that Ba2+ doped brookite TiO2 nanorod (TiO2: Ba) with polarization-induced charge separation is a candidate. The replacement of Ba2+ for Ti4+ not only induced significant lattice distortion to induce polarization but also created oxygen vacancy defects for facilitating the charge separation, leading to high-efficiency reactive oxygen species (ROS) evolution in the piezo-catalytic processes. Furthermore, the piezocatalytic ability to degrade dye wastewater demonstrates a rate constant of 0.172 min-1 and achieves a 100 % antibacterial rate at a low dose for eliminating E. coli. This study advances that doping can induce piezoelectricity and reveals that lattice distortion-induced polarization and vacancy defects engineering can improve ROS production, which might impact applications such as water disinfection and sonodynamic therapy.

Enhanced electrochemical nitrate reduction on copper nitride with moderate intermediates adsorption

Nitrate in surface and underground water caused systematic risk to the ecological environment. The electrochemically reduction of nitrate into ammonia (NO3RR), offering a sustainable route for nitrate containing wastewater treatment and ammonia fertilizer conversion. Exploration of catalyst with improved catalytic activity with lower energy barriers is still challenging. Here, we report a copper nitride (Cu3N) catalyst with moderate *NOx and *H2O intermediates adsorptions showed enhanced NO3RR performance. Density functional theory calculations reveals that the unique electronic structure of Cu3N provides efficient active sites for NO3RR, thus enabled balanced adsorption of *NO3 and *H2O (ΔE descriptor), sufficient active hydrogen, and moderate intermediate (*NO3 → HNO3, *NH2→*NH3) adsorption energy. Notably, the in-situ analysis technology revealed potential-driven reconstruction and rehabilitation of Cu3N, forming possible nitrogen vacancy, thus implied for better mechanism understanding. The NO3RR activity of Cu3N surpasses that of most recent catalysts and demonstrates superior stability and implies the application for NH4+ fertilizer recovery, which maintaining an NH3 Faradaic efficiency of 93.1 % and high yield rate of 2.9 mg cm2h-1 at -0.6 V versus RHE. These findings broaden the application scenarios of Cu3N catalyst for ammonia synthesis and provide strategy on improving NO3RR performance.

Glutathione‑iron hybrid nanozyme-based colorimetric sensor for specific and stable detection of thiram pesticide on fruit juices

Given the potential dangers of thiram to food safety, constructing a facile sensor is significantly critical. Herein, we presented a colorimetric sensor based on glutathione‑iron hybrid (GSH-Fe) nanozyme for specific and stable detection of thiram. The GSH-Fe nanozyme exhibits good peroxidase-mimicking activity with comparable Michaelis constant (Km = 0.551 mM) to the natural enzyme. Thiram pesticides can specifically limit the catalytic activity of GSH-Fe nanozyme via surface passivation, causing the change of colorimetric signal. It is worth mentioning that the platform was used to prepare a portable hydrogel kit for rapid qualitative monitoring of thiram. Coupling with an image-processing algorithm, the colorimetric image of the hydrogel reactor is converted into the data information for accurate quantification of thiram with a detection limit of 0.3 μg mL-1. The sensing system has good selectivity and high stability, with recovery rates in fruit juice samples ranging from 92.4% to 106.9%.

Interfacial engineering layered bimetallic oxyhydroxides for efficient oxygen evolution reaction

Transition metal-based oxyhydroxides (MOOH) have garnered significant attention as promising catalyst for the Oxygen Evolution Reaction (OER). However, the direct synthesis of MOOH poses challenges due to the instability of trivalent cobalt and nickel salts, attrivuted to their high oxidation states. In this study, theoretical computations predicted that Co(OH)2 nanosheets are exclusively formed on carbon structures, owing to the stronger binding energy between CoOOH and CC compared to Co(OH)2. Furthermore, the presence of FeOOH interface reduces the binding energy between CoOOH and carbon structure. Experiment evidence confirms that CoOOH can be directly synthesized through controlled epitaxial growth on an FeOOH interface using a hydrothermal method. Moreover, the in-situ doping of iron leads to the formation of high-quality Fe0.35Co0.65OOH with exceptional OER performance, displaying a low overpotential of 240 mV at 10 mA cm-2 and a small Tafel slope of 43 mV dec-1. Density functional theory (DFT) calculations uncover the substantial enhancement of oxygen-containing species adsorption abilities by Fe0.35Co0.65OOH, resulting in improved OER activity. This work presents a promising strategy for the efficient preparation of layered cobalt oxyhydroxides, enabling efficient energy conversion and storage.

Relieving metabolic burden to improve robustness and bioproduction by industrial microorganisms

Metabolic burden is defined by the influence of genetic manipulation and environmental perturbations on the distribution of cellular resources. The rewiring of microbial metabolism for bio-based chemical production often leads to a metabolic burden, followed by adverse physiological effects, such as impaired cell growth and low product yields. Alleviating the burden imposed by undesirable metabolic changes has become an increasingly attractive approach for constructing robust microbial cell factories. In this review, we provide a brief overview of metabolic burden engineering, focusing specifically on recent developments and strategies for diminishing the burden while improving robustness and yield. A variety of examples are presented to showcase the promise of metabolic burden engineering in facilitating the design and construction of robust microbial cell factories. Finally, challenges and limitations encountered in metabolic burden engineering are discussed.

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

Selective catalytic NH3-to-N2 oxidation (NH3-SCO) is highly promising for abating NH3 emissions slipped from stationary flue gas after-treatment devices. Its practical application, however, is limited by the non-availability of low-cost catalysts with high activity and N2 selectivity. Here, using defect-rich nitrogen-doped carbon nanotubes (NCNT-AW) as the support, we developed a highly active and durable copper-based NH3-SCO catalyst with a high abundance of cuprous (Cu+) sites. The obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T50 (i.e. the temperature to reach 50% NH3 conversion) of 174°C in the NH3-SCO reaction, which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs (OCNTs) or NCNT with less surface defects, but also those most active Cu catalysts in open literature. Reaction kinetics measurements and temperature-programmed surface reactions using NH3 as a probe molecule revealed that the NH3-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction (i-SCR) route involving nitric oxide (NO) as a key intermediate. According to mechanistic investigations by X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray absorption spectroscopy, the superior NH3-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and N-dopants. Specifically, surface defects promoted the anchoring of CuO nanoparticles on N-containing sites and, thereby, enabled efficient electron transfer from N to CuO, increasing significantly the fraction of SCR-active Cu+ sites in the catalyst. This study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu+-rich Cu catalysts for efficient abatement of slip NH3 emissions via selective oxidation.

C-H functionalization reactions catalyzed by artificial metalloenzymes

CH functionalization, a promising frontier in modern organic chemistry, facilitates the direct conversion of inert CH bonds into many valuable functional groups. Despite its merits, traditional homogeneous catalysis, often faces challenges in efficiency, selectivity, and sustainability towards this transformation. In this context, artificial metalloenzymes (ArMs), resulting from the incorporation of a catalytically-competent metal cofactor within an evolvable protein scaffold, bridges the gap between the efficiency of enzymatic transformations and the versatility of transition metal catalysis. Accordingly, ArMs have emerged as attractive tools for various challenging catalytic transformations. Additionally, the coming of age of directed evolution has unlocked unprecedented avenues for optimizing enzymatic catalysis. Taking advantage of their genetically-encoded protein scaffold, ArMs have been evolved to catalyze various CH functionalization reactions. This review delves into the recent developments of ArM-catalyzed CH functionalization reactions, highlighting the benefits of engineering the second coordination sphere around a metal cofactor within a host protein.

Advancing microbial production through artificial intelligence-aided biology

Microbial cell factories (MCFs) have been leveraged to construct sustainable platforms for value-added compound production. To optimize metabolism and reach optimal productivity, synthetic biology has developed various genetic devices to engineer microbial systems by gene editing, high-throughput protein engineering, and dynamic regulation. However, current synthetic biology methodologies still rely heavily on manual design, laborious testing, and exhaustive analysis. The emerging interdisciplinary field of artificial intelligence (AI) and biology has become pivotal in addressing the remaining challenges. AI-aided microbial production harnesses the power of processing, learning, and predicting vast amounts of biological data within seconds, providing outputs with high probability. With well-trained AI models, the conventional Design-Build-Test (DBT) cycle has been transformed into a multidimensional Design-Build-Test-Learn-Predict (DBTLP) workflow, leading to significantly improved operational efficiency and reduced labor consumption. Here, we comprehensively review the main components and recent advances in AI-aided microbial production, focusing on genome annotation, AI-aided protein engineering, artificial functional protein design, and AI-enabled pathway prediction. Finally, we discuss the challenges of integrating novel AI techniques into biology and propose the potential of large language models (LLMs) in advancing microbial production.

ECMpy 2.0: A Python package for automated construction and analysis of enzyme-constrained models

Genome-scale metabolic models (GEMs) have been widely employed to predict microorganism behaviors. However, GEMs only consider stoichiometric constraints, leading to a linear increase in simulated growth and product yields as substrate uptake rates rise. This divergence from experimental measurements prompted the creation of enzyme-constrained models (ecModels) for various species, successfully enhancing chemical production. Building upon studies that allocate macromolecule resources, we developed a Python-based workflow (ECMpy) that constructs an enzyme-constrained model. This involves directly imposing an enzyme amount constraint in GEM and accounting for protein subunit composition in reactions. However, this procedure demands manual collection of enzyme kinetic parameter information and subunit composition details, making it rather user-unfriendly. In this work, we've enhanced the ECMpy toolbox to version 2.0, broadening its scope to automatically generate ecGEMs for a wider array of organisms. ECMpy 2.0 automates the retrieval of enzyme kinetic parameters and employs machine learning for predicting these parameters, which significantly enhances parameter coverage. Additionally, ECMpy 2.0 introduces common analytical and visualization features for ecModels, rendering computational results more user accessible. Furthermore, ECMpy 2.0 seamlessly integrates three published algorithms that exploit ecModels to uncover potential targets for metabolic engineering. ECMpy 2.0 is available at https://github.com/tibbdc/ECMpy or as a pip package (https://pypi.org/project/ECMpy/).

Strong interactions through the highly polar "Early-Late" metal-metal bonds enable single-atom catalysts good durability and superior bifunctional ORR/OER activity

Simultaneously enhancing the durability and catalytic performance of metal-nitrogen-carbon (M-Nx-C) single-atom catalysts is critical to boost oxygen electrocatalysis for energy conversion and storage, yet it remains a grand challenge. Herein, through the combination of early and late metals, we proposed to enhance the stability and tune the catalytic activity of M-Nx-C SACs in oxygen electrocatalysis by their strong interaction with the M2'C-type MXene substrate. Our density functional theory (DFT) computations revealed that the strong interaction between "early-late" metal-metal bonds significantly improves thermal and electrochemical stability. Due to considerable charge transfer and shift of the d-band center, the electronic properties of these SACs can be extensively modified, thereby optimizing their adsorption strength with oxygenated intermediates and achieving eight promising bifunctional catalysts for ORR/OER with low overpotentials. More importantly, the constant-potential analysis demonstrated the excellent bifunctional activity of SACs supported on MXene substrate across a broad pH range, especially in strongly alkaline media with record-low overpotentials. Further machine learning analysis shows that the d-band center, the charge of the active site, and the work function of the formed heterojunctions are critical to revealing the ORR/OER activity origin. Our results underscore the vast potential of strong interactions between different metal species in enhancing the durability and catalytic performance of SACs.

Subcomponent self-assembly construction of tetrahedral cage FeII4L4 for high-resolution gas chromatographic separation

Metal organic cages (MOCs), as an emerging discrete supramolecular compounds, have received widespread attention in separation, biomedicine, gas capture, catalysis, and molecular recognition due to their porosity, adjustability and stability. Herein, we present a new chiral MOC FeII4L4 coated capillary column prepared for gas chromatographic (GC) separation of different types of organic compounds, including n-alkanes, n-alcohols, alkylbenzenes, isomers, especially for racemic compounds. There are 20 different kinds of racemates (e.g., alcohols, ethers, epoxides, esters, alkenes, and aldehydes) were well resolved on the FeII4L4 chiral column and a maximum resolution value for 1-phenyl-1-propanol reaches 6.17. The FeII4L4 coated column exhibited high column efficiency (3100 plates m-1 for n-dodecane) and good enantiomeric resolution complementary to that of a commercial β-DEX 120 column and the previously reported chiral MOC [Fe4L6] (ClO4)8 coated column. The relative standard deviation (RSDs) of the peak area and retention time of glycidol and nitrotoluene were below 1.2 %. This study reveals that chiral MOCs have good application prospects in chromatographic separation.

Rational engineering of homospermidine synthase for enhanced catalytic efficiency toward spermidine synthesis

Spermidine is a naturally occurring polyamine widely utilized in the prevention and treatment of various diseases. Current spermidine biosynthetic methods have problems such as low efficiency and complex multi-enzyme catalysis. Based on sequence-structure-function relationships, we engineered the widely studied homospermidine synthase from Blastochloris viridis (BvHSS) and obtained mutants that could catalyze the production of spermidine from 1,3-diaminopropane and putrescine. The specific activities of BvHSS and the mutants D361E and E232D + D361E (E232D-D) were 8.72, 46.04 and 48.30 U/mg, respectively. The optimal pH for both mutants was 9.0, and the optimal temperature was 50 °C. Molecular docking and dynamics simulations revealed that mutating aspartic acid at position 361 to glutamic acid narrowed the substrate binding pocket, promoting stable spermidine production. Conversely, mutating glutamic acid at position 232 to aspartic acid enlarged the substrate channel entrance, facilitating substrate entry into the active pocket and enhancing spermidine generation. In whole-cell catalysis lasting 6 h, D361E and E232D-D synthesized 725.3 and 933.5 mg/L of spermidine, respectively. This study offers a practical approach for single-enzyme catalyzed spermidine synthesis and sheds light on the crucial residues influencing homospermidine synthase catalytic activity in spermidine production.

Two-dimensional molybdenum boride coordinating with ruthenium nanoparticles to boost hydrogen generation from hydrolytic dehydrogenation of ammonia borane

The coordination between carrier and active metal is critical to the catalytic efficiency of ammonia borane (AB) hydrolysis reaction. In the present study, we report a new type of catalytic support based on molybdenum boride (MBene) MoAl1-xB and demonstrate that the effective combination of MoAl1-xB with Ru nanoparticles can realize the significantly enhanced performance for hydrogen generation. Owing to the efficient activation and dissociation of reactants, the optimal Ru/MoAl1-xB catalyst achieves the large turnover frequency of 494 molH2 molRu-1 min-1, high hydrogen generation rate of 119817 mL min-1 gRu-1 and favorable apparent activation energy of 39.2 kJ mol-1 for the catalytic hydrolysis of AB under alkaline-free condition. The isotopic test suggests the cleavage of OH bond in H2O is the rate-determining step for hydrolysis reaction, while the fracture of B-H bond in AB is also well revealed by attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) spectroscopy. Significantly, the flexible on-demand hydrogen generation is achieved by using chemical switches for on-off AB hydrolysis. This study provides a new support platform based on two-dimensional MBene to exploit efficient catalysts to boost AB dehydrogenation.