Recent advancements in sensing techniques based on functional materials for organophosphate pesticides

Effective nitenpyram detection in a dual-walled nitrogen-rich In(iii)/Tb(iii)–organic framework

A heterometallic MOF probe with the advantages of strong fluorescence, simple synthesis, high density of Lewis acidic and basic sites, and repeatable use, has been designed and synthesized, which exhibits a rapid and sensitive reaction to nitenpyram.

A treatise on Organophosphate pesticide pollution: Current strategies and advancements in their environmental degradation and elimination

Pesticides have been used in the field of agriculture ever since their role in protection of crops from pests which include four different categories namely insects, mites, rodents and animals has been identified. Organophosphate pesticides are one of the most extensively applied insecticides in the field of agriculture such that around 40% of all the pesticides that are produced and used commercially belong to this category. The main toxicological effect of these pesticides when exposed to a living being encompasses the irremediable inhibition of the acetylcholinesterase (AChE) enzyme which is involved in the neurotransmission of signals and hence its inhibition causes impairment of the respiratory tract and neuromuscular transmission. Apart from being used as a pesticide, organophosphates have also been applied as herbicides to some extent. The residues of these highly toxic chemicals have found route into the underground water system by seeping into the ground, in rivers where the agricultural run off water is disposed, and in the air when sprayed on the crops hence posing a threat to all the living strata exposed to these chemicals in various ways which are discussed further. Many significant studies have been carried out in order to evaluate the health risks associated with these pesticides which commonly include acute neurological disorders. This review emphasizes on the toxicological effects of organophosphate pesticides and the recent methods of detection that are used to identify trace amounts of organophosphate pesticides along with strategies which are used for their degradation.

An efficient system for electro-Fenton oxidation of pesticide by a reduced graphene oxide-aminopyrazine@3DNi foam gas diffusion electrode

A stable rGO-AmPyraz@3DNiF gas diffusion electrode was prepared via modification of 3D nickel foam (3D-NiF) with aminopyrazine functionalized reduced graphene oxide (rGO-AmPyraz) for the electro Fenton (EF) process. The generation capacity of H₂O₂ and OH radicals by this electrode was assessed relative to 3DNiF and rGO-AmPyraz@indium tin oxide (ITO) electrodes and with/without a coated Fe₃O₄ plate. The rGO-AmPyraz@3DNiF electrode showed the maximum production of these radicals at 2.2 mmol h^-1 and 410 μmol h^-1, respectively (pH 3) with the least leaching of Ni²⁺ such as < 0.5 mg L^-1 even after 5 cycles (e.g., relative to 3DNiF (24 mg L^-1). Such control on Ni ion leaching was effective all across the tested pH from 3 to 8.5. Its H₂O₂ generation capacity was far higher than that of the nanocarbon supported on commercially available ITO conductive glass. The mineralization of dichlorvos (at initial concentration: 50 mg L^-1) was confirmed with its complete degradation as the concentrations of the end products (e.g., free Cl^-1 (5.36 mg L^-1) and phosphate (12.89 mg L^-1)) were in good agreement with their stoichiometric concentration in dichlorvos. As such, the proposed system can be recommended as an effective electrode to replace nanocarbon-based product commonly employed for EF processes.

A critical review on recent developments in MOF adsorbents for the elimination of toxic heavy metals from aqueous solutions

Effective and substantial remediation of contaminants especially heavy metals from water is still a big challenge in terms of both environmental and biological perspectives because of their adverse effects on the human health. Many techniques including adsorption, ion exchange, co-precipitation, chemical reduction, ultrafiltration, etc. are reported for eliminating heavy metal ions from the water. However, adsorption has preferred because of its simple and easy handlings. Several types of adsorbents are observed and documented well for the purpose. Recently, highly porous metal-organic frameworks (MOFs) were developed by incorporating metals and organic ligands together and claimed as potent adsorbents for the remediation of highly toxic heavy metals from the aqueous solutions due to their unique features like greater surface area, high chemical stability, green and reuse material, etc. In this review, the authors discussed systematically some recent developments about secure MOFs to eliminate the toxic metals such as arsenic (both arsenite and arsenate), chromium(VI), cadmium (Cd), mercury (Hg) and lead (Pb). MOFs are observed as the most efficient adsorbents with greater selectivity as well as high adsorption capacity for metallic contamination. Graphical abstract.

Ultra-sensitive detection of malathion residues using FRET-based upconversion fluorescence sensor in food

Malathion is an organophosphorus pesticide which could remain in agricultural products and exert irreversible harmful effects on human health. Hence, strict monitoring of malathion contents is very significant. Here, a highly sensitive fluorescent aptasensor was developed for the determination of malathion, the system was based on a cationic polymer-mediated fluorescence 'turn-off'. In this system, malathion-specific aptamers were bound to cationic polymer through electrostatic interactions. To produce fluorescence resonance energy transfer (FRET), negatively charged upconversion fluorescent nanoparticles (UCNPs) and cationic-polymer encapsulated gold nanoparticles (GNPs) were combined. This combination resulted in fluorescence quenching, and the degree of quenching was correlated with the concentration of malathion. Under optimum conditions, the fluorescence intensities were observed to decrease linearly with the rising concentration of the malathion from 0.01 to 1 μM with a detection limit of 1.42 nM. Furthermore, the developed sensor possessed good selective recognition ability for malathion and was successfully used to detect malathion in adulterated tap water and matcha samples with high accuracy.

Recent advances in metal-organic frameworks for pesticide detection and adsorption

The large-scale use of pesticides such as organophosphate pesticides (OPPs) and organochlorine pesticides (OCPs) has led to serious environmental problems worldwide, and their high toxicity could cause serious damage to human health. It is crucial to remove and track them precisely in the environment and food resources. As novel nanomaterials, metal-organic frameworks (MOFs) have attracted significant attention in the fields of adsorption and luminescence sensing due to their rich topology, tunable pore size and shape, high surface area, and abundant active sites. Luminescent metal-organic frameworks (LMOFs) have sprung up as great potential chemical sensors to detect pesticides with fast response, high sensitivity, high selectivity and easy operation. Therefore, in this highlight, we focus on recent progress of MOFs in sensing and adsorbing pesticides, as well as in the possible mechanism of sensing, so as to attract more attention to pesticide detection and adsorption.

"Metal-Free" Fluorescent Supramolecular Assemblies for Distinct Detection of Organophosphate/Organochlorine Pesticides

The "metal-free", easy-to-prepare fluorescent supramolecular assemblies based on anthracene/perylene bisamide (PBI) derivatives have been developed for the distinct detection of organophosphate (CPF) and organochlorine (DCN) pesticides in aqueous media. The supramolecular assemblies of anthracene derivative show rapid and highly selective "on-on" response toward organophosphate (CPF), which is attributed to the formation of CPF-induced formation of "closely packed" assemblies. A detection limit in the nanomolar range is observed for CPF. On the other hand, the inner filter effect is proposed as the mechanism for the "on-off" detection of DCN using supramolecular assemblies of the anthracene derivative. This is the first report on the development of fluorescent materials having the potential to differentiate between organophosphate and organochlorine pesticides. The assemblies of anthracene derivative 2 also act as "enzyme mimic" as organophosphate pesticide show a preferential affinity for assemblies of derivative 2 over acetylcholinesterase enzyme. Further, the real-time applications of supramolecular assemblies have also been explored for the detection of CPF and DCN in spiked water and in agricultural products such as grapes and apples.

Interactive effects of fish predation and sublethal insecticide concentrations on freshwater zooplankton communities

Stresses imposed by insecticides and predators are possibly the most rigorous filters to which aquatic organisms are exposed in rivers and lakes associated with agricultural lands. However, their interactive effects on zooplankton communities are still unclear. This study elucidated the zooplankton community response to fish predation, the insecticide chlorpyrifos (CLP), and a combination of both factors, using a 30-day mesocosm experiment. The zooplankton assemblage was influenced by fish presence prior to CLP toxicity. Fish predation reduced microcrustacean density leading to a community dominated by microzooplankton (i.e.: rotifers and copepod nauplii). CLP decreased the species richness in treatments with and without fish, yielding an increase in the abundance of bdelloid rotifers, in the genera Lepadella and Trichocerca. The zooplankton:phytoplankton (<20 μm) ratio decreased substantially when the two stressors, fish predation and insecticide toxicity, were combined. Although CLP dissipated relatively rapidly in the aqueous phase and accumulated in sediment and fish tissue, zooplankton richness was unable to recover. A possible explanation for this could be the inhibitory effect of CLP on resting stage hatchings in the sediment. Therefore, the combined effects of fish predation and CLP might influence zooplankton richness, leading to an assemblage dominated by rotifers that appeared to be resistant to both factors, with a limited capability to control phytoplankton growth. Thus, the effects of natural and anthropogenic stressors should be considered together when assessing community dynamics in aquatic ecosystems.

A built-in self-calibrating luminescence sensor based on RhB@Zr-MOF for detection of cations, nitro explosives and pesticides

A RhB@Zr-MOF composite with dual-emission properties was successfully constructed, which comprises a zirconium-based metal-organic framework and the luminescent dye molecule, Rhodamine B (RhB), embedded via the encapsulation method. The fluorescence intensity ratio of the two emissions was found to be ca. 370 nm/590 nm for RhB@Zr-MOF. The fluorescence intensity values of the two emissions of RhB@Zr-MOF can also be affected by the structures of analytes containing different organic groups. Due to the existence of the dual-emission properties in RhB@Zr-MOF, the relative fluorescence intensity of the emission peaks was introduced as a detection index instead of absolute fluorescence intensity. RhB@Zr-MOF, which possesses the characteristics of a built-in self-calibrating fluorescence sensor, was investigated for detecting cations, nitroaromatics and pesticides. Aside from high sensitivity and selectivity, recyclability is the most important property for sensing pesticides. This work shows that RhB@Zr-MOF can maintain its stability after 5 cycles of detecting nitenpyram, with LOD of 0.2 μM. These results demonstrate that dye@MOFs with dual-emission properties can be employed as multifunctional fluorescence sensors for different types of analytes, and that RhB@Zr-MOF provides a new paradigm for analyte sensing.

Molecular-Imprinting-Based Surface-Enhanced Raman Scattering Sensors

Molecularly imprinted polymers (MIPs) receive extensive interest, owing to their structure predictability, recognition specificity, and application universality as well as robustness, simplicity, and inexpensiveness. Surface-enhanced Raman scattering (SERS) is regarded as an ideal optical detection candidate for its unique features of fingerprint recognition, nondestructive property, high sensitivity, and rapidity. Accordingly, MIP based SERS (MIP-SERS) sensors have attracted significant research interest for versatile applications especially in the field of chemo- and bioanalysis, showing excellent identification and detection performances. Herein, we comprehensively review the recent advances in MIP-SERS sensors construction and applications, including sensing principles and signal enhancement mechanisms, focusing on novel construction strategies and representative applications. First, the basic structure of the MIP-SERS sensors is briefly outlined. Second, novel imprinting strategies are highlighted, mainly including multifunctional monomer imprinting, dummy template imprinting, living/controlled radical polymerization, and stimuli-responsive imprinting. Third, typical application of MIP-SERS sensors in chemo/bioanalysis is summarized from both small and macromolecular aspects. Lastly, the challenges and perspectives of the MIP-SERS sensors are proposed, orienting sensitivity improvement and application expanding.

Recent Progress on Luminescent Metal-Organic Framework-Involved Hybrid Materials for Rapid Determination of Contaminants in Environment and Food

The high speed of contaminants growth needs the burgeoning of new analytical techniques to keep up with the continuous demand for monitoring and legislation on food safety and environmental pollution control. Metal-organic frameworks (MOFs) are a kind of advanced crystal porous materials with controllable apertures, which are self-assembled by organic ligands and inorganic metal nodes. They have the merits of large specific surface areas, high porosity and the diversity of structures and functions. Latterly, the utilization of metal-organic frameworks has attracted much attention in environmental protection and the food industry. MOFs have exhibited great value as sensing materials for many targets. Among many sensing methods, fluorometric sensing is one of the widely studied methods in the detection of harmful substances in food and environmental samples. Fluorometric detection based on MOFs and its functional materials is currently one of the most key research subjects in the food and environmental fields. It has gradually become a hot research direction to construct the highly sensitive rapid sensors to detect harmful substances in the food matrix based on metal-organic frameworks. In this paper, we introduced the synthesis and detection application characteristics (absorption, fluorescence, etc.) of metal-organic frameworks. We summarized their applications in the MOFs-based fluorometric detection of harmful substances in food and water over the past few years. The harmful substances mainly include heavy metals, organic pollutants and other small molecules, etc. On this basis, the future development and possible application of the MOFs have prospected in this review paper.

Simulated revelation of the adsorption behaviours of acetylcholinesterase on charged self-assembled monolayers

An acetylcholinesterase (AChE)-based electrochemical biosensor, as a promising alternative to detect organophosphates (OPs) and carbamate pesticides, has gained considerable attention in recent years, due to the advantages of simplicity, rapidity, reliability and low cost. The bio-activity of AChE immobilized on the surface and the direct electron transfer (DET) rate between an enzyme and an electrode directly determined the analytical performances of the AChE-based biosensor, and experimental studies have shown that the charged surfaces have a strong impact on the detectability of the AChE-based biosensor. Therefore, it is very important to reveal the behaviour of AChE in bulk solution and on charged surfaces at the molecular level. In this work, the adsorption orientation and conformation of AChE from Torpedo californica (TcAChE) on oppositely charged self-assembled monolayers (SAMs), COOH-SAM and NH₂-SAM with different surface charge densities, were investigated by parallel tempering Monte Carlo (PTMC) and all-atom molecular dynamics simulations (AAMD). Simulation results show that TcAChE could spontaneously and stably adsorb on two oppositely charged surfaces by the synergy of an electric dipole and charged residue patch, and opposite orientations were observed. The active-site gorge of TcAChE is oriented toward the surface with the "end-on" orientation and the active sites are close to the surface when it is adsorbed on the positively charged surface and the tunnel cost for the substrate is lower than that on the negatively charged surface and in bulk solution, while for TcAChE adsorbed on the negatively charged surface, the active site of TcAChE is far away from the surface and the active-site gorge is oriented toward the solution with a "back-on" orientation. It suggests that the positively charged surface could provide a better microenvironment for the efficient bio-catalytic reaction and quick DET between TcAChE and the electrode surface. Moreover, the RMSD, RMSF, dipole moment, gyration radius, eccentricity and superimposed structures show that only a slight conformational change occurred on the relatively flexible structure of TcAChE during simulations, and the native conformation is well preserved after adsorption. This work helps us better comprehend the adsorption mechanism of TcAChE on charged surfaces and might provide some guidelines for the development of new TcAChE-based amperometric biosensors for the detection of organophosphorus pesticides.

A review on colorimetric methods for determination of organophosphate pesticides using gold and silver nanoparticles

This review (with 99 refs.) summarizes the progress that has been made in colorimetric (i.e. spectrophotometric) determination of organophosphate pesticides (OPPs) using gold and silver nanoparticles (NPs). Following an introduction into the field, a first large section covers the types and functions of organophosphate pesticides. Methods for colorimetric (spectrophotometric) measurements including RGB techniques are discussed next. A further section covers the characteristic features of gold and silver-based NPs. Syntheses and modifications of metal NPs are covered in section 5. This is followed by overviews on enzyme inhibition-based assays, aptamer-based assays and chemical (non-enzymatic) assays, and a discussion of specific features of colorimetric assays. Several Tables are presented that give an overview on the wealth of methods and materials. A concluding section addresses current challenges and discusses potential future trends and opportunities. Graphical abstractSchematic representation of organophosphate pesticide determinations based on aggregation of nanoparticles (particular silver or gold nanoparticles). This leads to a color change which can be determined visually and monitored by a red shift in the absorption spectrum.

Two luminescent dye@MOFs systems as dual-emitting platforms for efficient pesticides detection

Pesticides, which can accumulate in soil, water, animals and plants, are essential to world agriculture. Developing a method that can efficiently and quickly detect toxic pesticides is of importance but still a challenge. Here, two luminescent dye@MOFs systems, Rho B@1 and Rho 6G@1, were successfully fabricated based on [Cd₂(tib)(btb)(H₂O)₂]∙NO₃∙2DMF (1). This work is the first use of two fluorescent sensors as dual-emitting platforms for detecting pesticides. As a result, the fluorescence intensity ratios between the two main emissions can be tuned using the concentrations of the dye solutions, and the emissions are at 370 nm/606 nm and 370 nm/590 nm for Rho B@1 and Rho 6G@1, respectively. The intensities of the two main emissions of Rho B@1 and Rho 6G@1 are also influenced by the chemical structures of pesticides with electron-withdrawing groups. It is important that high sensitivity and selectivity for sensing pesticides must have good recyclability. Rho B@1 and Rho 6G@1 can still remain stable regarding the detection of nitenpyram even after 5 cycles, with LODs of 0.48 nM for Rho B@1 and 3 nM for Rho 6G@1, which indicate that these two luminescent dye@MOFs systems are excellent fluorescence probe candidates for the selective detection of pesticides.

Design and synthesis of a novel coumarin-based framework as a potential chemomarker of a neurotoxic insecticide, azamethiphos

A coumarin based receptor has been synthesised and its organic nanoparticles were prepared. Further, these nanoparticles were explored as a chemosensor for copper(ii) ions and azamethiphos.

Surface plasmon resonance based fiber-optic nanosensor for the pesticide fenitrothion utilizing Ta2O5 nanostructures sequestered onto a reduced graphene oxide matrix

A surface plasmon resonance study was carried out for the identification and determination of the organophosphate pesticide fenitrothion via an optical fiber sensor. A thin layer of silver was deposited on the unclad core of silica optical fiber for plasmon generation. This was followed by the deposition of a sensing surface comprising a layer of tantalum(V) oxide nanoparticles sequestered in a nano-scaled matrix of reduced graphene oxide. The sensing mechanism is due to the interaction of fenitrothion with the silver film which leads to a change in refractive index.. Characterized by a wavelength interrogation scheme, the fiber-optic sensor exhibited a red shift equalling 56 nm corresponding to fenitrothion concentration in the range 0.25-4 μM including the blank solution. The spectral sensitivity is 24 nm μM^-1, the limit of detection is 38 nM, and the response time is as short as 23 s. The sensor is selective, repeatable and works at ambient temperature. Graphical abstractSchematic representation of the sensing mechanism of an SPR based fiber-optic fenitrothion sensor utilizing modification in refractive index of sensing surface comprising of tantalum(V) oxide (Ta₂O₅) nanoparticles embedded in reduced graphene oxide (rGO) caused by interaction with fenitrothion entities.

Development of Microalgae Biosensor Chip by Incorporating Microarray Oxygen Sensor for Pesticides Sensing

A microalgae (Pseudokirchneriella subcapitata) biosensor chip for pesticide sensing has been developed by attaching the immobilized microalgae biofilm pon the microarray dye spots (size 100 μm and pitch 200 μm). The dye spots (ruthenium complex) were printed upon SO₃-modified glass slides using a polydimethylsiloxane (PDMS) stamp and a microcontact printer (μCP). Emitted fluorescence intensity (FI) variance due to photosynthetic activity (O₂ production) of microalgae was monitored by an inverted fluorescent microscope and inhibition of the oxygen generation rate was calculated based on the FI responses both before and after injection of pesticide sample. The calibration curves, as the inhibition of oxygen generation rate (%) due to photosynthetic activity inhibition by the pesticides, depicted that among the 6 tested pesticides, the biosensor showed good sensitivity for 4 pesticides (diuron, simetryn, simazine, and atrazine) but was insensitive for mefenacet and pendimethalin. The detection limits were 1 ppb for diuron and 10 ppb for simetryn, simazine, and atrazine. The simple and low-cost nature of sensing of the developed biosensor sensor chip has apparently created opportunities for regular water quality monitoring, where pesticides are an important concern.

Air-assisted ionic liquid dispersive liquid-liquid microextraction based on solidification of the aqueous phase for the determination of triazole fungicides in water samples by high-performance liquid chromatography

A simple, rapid, and environmentally friendly approach was introduced to determine triazole fungicides in water samples by air-assisted ionic liquid dispersive liquid-liquid microextraction based on solidification of the aqueous phase using high-performance liquid chromatography-diode array detection. Ionic liquid was applied as the extraction solvent rather than a high-toxicity extraction solvent. The air-assisted dispersion method induced a trace amount of the ionic liquid to disperse as small droplets in the water sample, which significantly increased the contact area between the organic phase and the aqueous phase for the rapid transfer of target fungicides without using a dispersion solvent or auxiliary extraction devices. The solidification of the aqueous phase facilitated the collection of extraction solvent. The type of extraction solvent, the volume ratio of the extraction solvent to the water sample, the number of extraction cycles, the addition of NaCl, and pH values were evaluated. The recoveries were 72.65-100.13% with a relative standard deviation of 0.92% to 5.99%. The limits of quantification varied from 0.65 ng mL^-1 to 1.83 ng mL^-1. This approach can be used to determine fungicides in ground, river, and lake water samples.

A Bifunctional Luminescent Metal-Organic Framework for the Sensing of Paraquat and Fe3+ Ions in Water

The hydrothermal reaction of Zn²⁺ ions with a mixture of two ligands, Hcptpy and H₃ btc (Hcptpy=4-(4-carboxyphenyl)-2,2':4',4''-terpyridine; H₃ btc=1,3,5-benzenetricarboxylic acid), led to the formation of a 3D metal-organic framework (MOF) with 1D channels, [Zn₂ (cptpy)(btc)(H₂ O)]_n (1), which was structurally characterized by using single-crystal X-ray diffraction (SXRD). In MOF 1, two independent Zn²⁺ ions were interconnected by btc^3- ligands to form a 1D chain, whilst adjacent Zn²⁺ ions were alternately bridged by cptpy^- ligands to generate a 2D sheet, which was further linked by 1D chains to form a 3D framework with a new (3,3,4,4)-connected topology. Furthermore, compound 1 also exhibited excellent stability towards air and water and, more importantly, luminescence experiments indicated that it could serve as a probe for the sensitive detection of paraquat (PAQ) and Fe³⁺ ions in aqueous solution.

4-Mercaptobenzoic Acid Labeled Gold-Silver-Alloy-Embedded Silica Nanoparticles as an Internal Standard Containing Nanostructures for Sensitive Quantitative Thiram Detection

In this study, SiO2@Au@4-MBA@Ag (4-mercaptobenzoic acid labeled gold-silver-alloy-embedded silica nanoparticles) nanomaterials were investigated for the detection of thiram, a pesticide. First, the presence of Au@4-MBA@Ag alloys on the surface of SiO2 was confirmed by the broad bands of ultraviolet-visible spectra in the range of 320-800 nm. The effect of the 4-MBA (4-mercaptobenzoic acid) concentration on the Ag shell deposition and its intrinsic SERS (surface-enhanced Raman scattering) signal was also studied. Ag shells were well coated on SiO2@Au@4-MBA in the range of 1-1000 µM. The SERS intensity of thiram-incubated SiO2@Au@4-MBA@Ag achieved the highest value by incubation with 500 µL thiram for 30 min, and SERS was measured at 200 µg/mL SiO2@Au@4-MBA@Ag. Finally, the SERS intensity of thiram at 560 cm-1 increased proportionally with the increase in thiram concentration in the range of 240-2400 ppb, with a limit of detection (LOD) of 72 ppb.

Click Reaction-Mediated T2 Immunosensor for Ultrasensitive Detection of Pesticide Residues via Brush-like Nanostructure-Triggered Coordination Chemistry

We develop an ultrasensitive T₂-mediated immunosensor based on the coordination chemistry and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide andalkyne (CuAAC) and apply it for the detection of pesticide residues. We functionalize polyglutamic acid (PGA) on polystyrene to form a brush-like nanostructure that has a large loading capacity of Cu(II) through the coordination chemistry between PGA and Cu(II). Such a brush-like nanostructure could be used to chelate Cu(II) to modulate the CuAAC between azide-functionalized 1000 nm polystyrene (PS₁₀₀₀) and alkyne-functionalized 30 nm magnetic nanoparticles (MNP₃₀), and the MNP₃₀-PS₁₀₀₀ conjugate as a product of CuAAC can act as a magnetic probe in this T₂-based immunosensor. This click chemistry and coordination chemistry-mediated immunosensor allows for an ultrasensitive detection for chlorpyrifos residue (0.022 ng/mL), a 58-fold enhancement compared with that of enzyme-linked immunosorbent assay (1.28 ng/mL), providing a promising platform for detection of trace small molecules.

Dynamic interactions between peroxidase-mimic silver NanoZymes and chlorpyrifos-specific aptamers enable highly-specific pesticide sensing in river water

With growing environmental and health concerns over persistent organic compounds such as organophosphates, regulatory bodies have imposed strict regulations for their use and monitoring in water bodies. Although conventional analytical tools exist for the detection of organophosphorus pesticides, new strategies need to be developed to fulfil the ASSURED (affordable, sensitive, specific, user-friendly, rapid, equipment-free and deliverable to end users) criteria of the World Health Organisation. One such strategy is to employ the ability of certain nanoparticles to mimic the enzymatic activity of natural enzymes to develop optical sensors. We show that the intrinsic peroxidase-mimic NanoZyme activity of tyrosine-capped silver nanoparticles (Ag-NanoZyme) can be exploited for highly specific and rapid detection of chlorpyrifos, an organophosphorus pesticide. The underlying working principle of the proposed aptasensor is based on the dynamic non-covalent interaction of the chlorpyrifos specific aptamer (Chl) with the NanoZyme (sensor probe) vs. the pesticide target (analyte). The incorporation of the Chl aptamer ensures high specificity leading to a colorimetric response specifically in the presence of chlorpyrifos, while the sensor remains unresponsive to other pesticides from organophosphate and non-organophosphate groups. The robustness of the sensor to work directly in environmental samples was established by evaluating its ability to detect chlorpyrifos in river water samples. The excellent recovery rates demonstrate the sensor robustness, while the simplicity, and rapid sensor response (2 min) to detect the presence of chlorpyrifos highlights the capabilities of the proposed colorimetric sensing system.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

What are the Main Sensor Methods for Quantifying Pesticides in Agricultural Activities? A Review

In recent years, there has been an increase in pesticide use to improve crop production due to the growth of agricultural activities. Consequently, various pesticides have been present in the environment for an extended period of time. This review presents a general description of recent advances in the development of methods for the quantification of pesticides used in agricultural activities. Current advances focus on improving sensitivity and selectivity through the use of nanomaterials in both sensor assemblies and new biosensors. In this study, we summarize the electrochemical, optical, nano-colorimetric, piezoelectric, chemo-luminescent and fluorescent techniques related to the determination of agricultural pesticides. A brief description of each method and its applications, detection limit, purpose—which is to efficiently determine pesticides—cost and precision are considered. The main crops that are assessed in this study are bananas, although other fruits and vegetables contaminated with pesticides are also mentioned. While many studies have assessed biosensors for the determination of pesticides, the research in this area needs to be expanded to allow for a balance between agricultural activities and environmental protection.

Organophosphate hydrolase conjugated UiO-66-NH2 MOF based highly sensitive optical detection of methyl parathion

The hexahistidine-tagged organophosphorus hydrolase (OPH^6His) has been immobilized on a Zr-MOF, namely UiO-66-NH₂. The resulting enzyme-MOF composite was used as a carrier to facilitate the hydrolysis of an organophosphate pesticide, i.e., methyl parathion in to p-nitrophenol (PNP). The formation of PNP took place in direct proportion to the added pesticide concentration. Coumarin1 (7-diethylamino-4-methylcoumarin) was then introduced in the reaction mixture as a reporter fluorescent molecule. As PNP acted to quench the fluorescence of coumarin1, it became possible to detect methyl parathion over a wide concentration range of 10-10⁶ ng/mL with an achievable limit of quantification as 10 ng/mL. The immobilization of OPH^6His on the surface of UiO-66-NH₂ was found to endow an improvement in the enzymatic activity by about 37%. The OPH^6His/UiO-66-NH₂ conjugate was reusable for at least up to eight times and also found stable toward long-term storage (minimum 60 days). The potential practical utility of the above proposed sensing method has been demonstrated by employing it for an accurate analysis of pesticide-spiked food samples.

Determination and removal of clenbuterol with a stable fluorescent zirconium(IV)-based metal organic framework

A metal organic framework (MOF) based adsorbent of type UiO-66 was hydrothermally prepared and applied to simultaneous sensing and removal of the asthma drug clenbuterol. The MOF possesses a large specific surface area (1460 cm²·g^-1) and a stable structure, and has a large adsorption capacity for clenbuterol (160 mg·g^-1). If clenbuterol binds to the MOF, the fluorescence of the sorbent (best measured at excitation/emission wavelengths of 290/396 nm) is quenched by up to 88%. Based on these findings, a fluorometric assay has been developed for the rapid determination of clenbuterol. The adsorption equilibrium of UiO-66 for CLB can be achieved at 60 min and the adsorption efficiency is above 80%. The method has a linear response in the 4.0 to 40 ng·mL^-1 concentration range, and the lower limit of detection is 0.17 μM. All of this indicates that UiO-66 is promising for simultaneous detection and the removal of CLB in water. Graphical abstract Schematic presentation of the detection and removal of clenbuterol in water medium by a stable fluorescent Zr(IV)-based metal organic framework. This method exhibited a large adsorption capacity for clenbuterol (160 mg/g) and low limit of detection (0.17 μM).

Nanostructured Diatom-ZrO2 composite as a selective and highly sensitive enzyme free electrochemical sensor for detection of methyl parathion

In the current work we report a simple and scalable technique for synthesis of ordered nanoporous Si-ZrO₂ composite derived from the diatom Phaeodactylum tricornutum. The composite was well characterized using SEM, TEM-EDX, FTIR, TGA, BET and DLS. The diatom-ZrO₂ was found to have a specific surface area of 140 m²/g, Si:Zr ratio of 1:4 and a particle size of 80 ± 2 nm. This composite was evaluated as an enzyme free electrochemical sensor towards the detection of methyl parathion (MP) and showed excellent sensing ability at extremely low detection limits of 54.3 pM and a linear concentration range of 3.4 nM to 64 μM. The diatom-ZrO₂ composite was also found to be highly selective towards MP as shown by its response even in the presence of high concentrations of other interfering molecules and ions.

Evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets for the determination of triazole fungicides in water samples by high-performance liquid chromatography

A simple, rapid, and effective analytical procedure for determining three triazole fungicides (myclobutanil, epoxiconazole, and tebuconazole) in water samples is developed by high-performance liquid chromatography-diode array detection after evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets. The extraction procedure involves the sequential addition of the extraction solvent 1-dodecanol (low density), volatile solvent dichloromethane (high density), and calcium oxide to the aqueous sample (the latter reacting exothermically). The CaO reaction can promote the volatilization of the dichloromethane which disperses the 1-dodecanol as fine droplets in the aqueous sample due to the bubbles generated. Therefore, a dispersive solvent is not required. Then, the floating 1-dodecanol is solidified using an ice bath for easy separation from the sample. The variables (the volumes of extraction and volatile solvents, amounts of calcium oxide and sodium chloride, pH values, and extraction time) in the extraction procedure are further optimized. Under optimized conditions, the linearity ranges are 0.05-5 μg mL^-1 with correlation coefficients greater than 0.99. The limits of detection and quantification are 0.0051-0.0090 μg mL^-1 and 0.0169-0.0299 μg mL^-1, respectively. The recoveries of myclobutanil, epoxiconazole, and tebuconazole in tap, reservoir, and river water range between 77.6% and 104.4% with relative standard deviations ranging from 0.6% to 7.8%. Hence, the method was reliable for analysis of myclobutanil, epoxiconazole, and tebuconazole in water samples.

Sensitive biosensing of organophosphate pesticides using enzyme mimics of magnetic ZIF-8

Development of a sensitive detection method for the reliable screening of widely used organophosphorus (OP) toxins is a crucial request to control their side-effects. Herein, a novel fluorometric assay based on the acetylcholinesterase (AChE) inhibited enzymatic activity and the new peroxidase-like Fe₃O₄ nanoparticles@ZIF-8 composite (Fe₃O₄ NPs@ZIF-8) was developed for the determination of OPs. Magnetic Fe₃O₄ NPs were encapsulated into ZIF-8 and the high mimetic activity of produced composite was assessed on the oxidation of substrates. This observation was applied to the rapid detection of diazinon as a model OP compound. The sensing tool contains AChE and choline oxidase (CHO) enzymes, peroxidase colorimetric or fluorometric substrate, and Fe₃O₄ NPs@ZIF-8 as the catalyst. In the presence of mimic Fe₃O₄ NPs@ZIF-8, the generated H₂O₂ from the enzymatic reactions of acetylcholine is decomposed to hydroxyl radicals. The radicals oxidize the peroxidase substrates to generate a detectable signal. However, due to the inhibition effect of OPs on the enzymatic activity of AChE, lower H₂O₂ amounts are produced in the presence of diazinon. Using the fluorometric detection system, the generated signal is decreased proportionally by increasing diazinon concentration in the range of 0.5-500 nM. The limit of detection was obtained 0.2 nM. Consequently, the usage of high performance peroxidase-mimic Fe₃O₄ NPs@ZIF-8 provided a sensitive bio-assay with a potential to be applied as screening tool for toxic OP compounds. The developed assay was successfully applied for the determination of diazinon in water and fruit juices.

Trends and Perspectives in Immunosensors for Determination of Currently-Used Pesticides: The Case of Glyphosate, Organophosphates, and Neonicotinoids

Pesticides, due to their intensive use and their peculiar chemical features, can persist in the environment and enter the trophic chain, thus representing an environmental risk for the ecosystems and human health. Although there are several robust and reliable standard analytical techniques for their monitoring, the high frequency of contamination caused by pesticides requires methods for massive monitoring campaigns that are capable of rapidly detecting these compounds in many samples of different origin. Immunosensors represent a potential tool for simple, rapid, and sensitive monitoring of pesticides. Antibodies coupled to electrochemical or optical transducers have resulted in effective detection devices. In this review, the new trends in immunosensor development and the application of immunosensors for the detection of pesticides of environmental concern-such as glyphosate, organophosphates, and neonicotinoids-are described.

Amorphous metal boride as a novel platform for acetylcholinesterase biosensor development and detection of organophosphate pesticides

The exploration of new materials for modifying electrodes is important to advance electrochemical biosensors. Herein, we demonstrated that amorphous bimetallic boride material (Co-2Ni-B) prepared by a simple and facile aqueous reaction is an efficient matrix to immobilize acetylcholinesterase (AChE) to construct a biosensor for the determination of organophosphate pesticides. The effects of different composition and crystallinity on its electrochemical performance are investigated, and the optimization studies of the biological transducer were also discussed. Under optimal conditions, the fabricated sensor showed good analytical performance for the determination of chlorpyrifos with a low limit of detection (2.83 pM) and a wide linear range (3 pM-300 nM). The proposed biosensor also demonstrated high reproducibility, stability and accuracy. The impressive performance was due to the excellent conductivity and the unique amorphous bimetal-metalloid complex nanostructure. These results introduce a new class of promising materials as a robust platform for biosensor applications.

A novel sensing layer based on metal–organic framework UiO-66 modified with TiO2–graphene oxide: application to rapid, sensitive and simultaneous determination of paraoxon and chlorpyrifos

Simultaneous electrochemical detection of paraoxon and chlorpyrifos based on metal–organic framework UiO-66 modified with TiO₂–graphene oxide.

Selective sensing and visualization of pesticides by ABW-type metal–organic framework based luminescent sensors

A new ABW-type luminescent metal–organic framework (MOF) namely (H₃O)[Zn₂L(H₂O)]·3NMP·6H₂O (1), constructed with eco-friendly Zn²⁺ and the multicarboxylate intraligand (LH₅) was designed, synthesized and fully characterized by X-ray single-crystal diffraction, steady-state absorption and emission spectroscopy, and SEM observations. The MOF-based suspension sensor 1 (NMP) demonstrated high sensitivity to low-concentration pesticides of chlorothalonil (CTL), nitrofen (NF), trifluralin (TFL), and 2,6-dichloro-4-nitroaniline (DCN), which was assigned to the synergistic effect of the photoinduced electron transfer and the fluorescence resonance energy transfer. With the highest luminescent detection efficiency (K_SV up to 11.194 μmol⁻¹ and LOD down to 2.93 ppm) to DCN, 1 (NMP) was successfully applied for the selective sensing of DCN. The MOF-based film sensor 1 (film) illustrated the selective visualization sensing of trace amounts of DCN. In addition, based on the high saturated vapor pressure of TFL and the unique bathochromic shift effect to the emission maxima of 1, the MOF-based luminescent vapor sensing device 1 (LED) successfully exhibited operability for sensing of TFL vapor. The results illustrated a feasible approach to construct new MOF-based luminescent sensors for selective sensing and visualization of pesticides.

A novel ABW-type luminescent metal–organic framework was applied for selective visualization sensing of trace amounts of 2,6-dichloro-4-nitroaniline and vapor sensing of trifluralin.

Highly sensitive and selective determination of malathion in vegetable extracts by an electrochemical sensor based on Cu-metal organic framework

This article demonstrates the first application of a copper-based porous coordination polymer (BTCA-P-Cu-CP) as a carbon paste electrode (CPE) modifier for the detection of malathion. The electrochemical behavior of BTCA-P-Cu-CP/CPE was explored using cyclic voltammetry (CV) while chrono-amperometry methods were applied for the analytical evaluation of the sensor performance. Under optimized conditions, the developed sensor exhibited high reproducibility, stability, and wide dynamic range (0.6-24 nM) with the limits of detection and sensitivity equal to 0.17 nM and 5.7 µAnMcm^-1, respectively, based on inhibition signal measurement. Furthermore, the presence of common coexisting interfering species showed a minor change in signals (<4.4%). The developed sensor has been applied in the determination of malathion in spiked vegetable extracts. It exhibited promising results in term of fast and sensitive determination of malathion in real samples at trace level with recoveries of 91.0 to 104.4%. (RSDs < 5%, n = 3). A comparison of the two studied techniques showed that the HPLC technique is unable to detect malathion when the concentration is lower than 1.8 µM while 0.006 µM is detected with appropriate RSDs 0.2-5.2% (n = 3) by amperometric method. Due to the high sensitivity and selectivity, this new electrochemical sensor will be useful for monitoring trace malathion in real samples.