Microplastics in bivalves cultured for human consumption

Understanding microplastic pollution of marine ecosystem: a review

Microplastics are emerging as prominent pollutants across the globe. Oceans are becoming major sinks for these pollutants, and their presence is widespread in coastal regions, oceanic surface waters, water column, and sediments. Studies have revealed that microplastics cause serious threats to the marine ecosystem as well as human beings. In the past few years, many research efforts have focused on studying different aspects relating to microplastic pollution of the oceans. This review summarizes sources, migration routes, and ill effects of marine microplastic pollution along with various conventional as well as advanced methods for microplastics analysis and control. However, various knowledge gaps in detection and analysis require attention in order to understand the sources and transport of microplastics, which is critical to deploying mitigation strategies at appropriate locations. Advanced removal methods and an integrated approach are necessary, including government policies and stringent regulations to control the release of plastics.

Identification of spectral responses of different plastic materials by means of multispectral imaging

In this work, multispectral imaging (MSI) is introduced as an innovative, practical, and non-invasive solution capable of identifying and detecting (micro)plastics. MSI holds significant appeal for industry due to its flexibility, ease of implementation, and portability. The integration of MSI with Principal Components Analysis (PCA) enables precise identification of different plastics and differentiation of microplastics within mixtures. The technique successfully identifies and quantifies the pure spectral response (endmembers) of each microplastic in every pixel of the original image. As a result, the model excels in distinguishing specific plastic materials from their surrounding backgrounds. This novel approach facilitates the identification of randomly dispersed microplastics in water.

Microplastic Release from Single-Use Plastic Beverage Cups

Microplastics (MPs) have attracted considerable attention as one of the most remarkable food and drink pollutants in recent years. Disposable cups, which are widely used as single-use containers, have been suspected as the primary sources of MPs found in cold and hot beverages. In this study, the effect of different exposure times (0, 5, 10 and 20 min) and temperatures (4 °C, 50 °C and 80 °C) on MP release from the single-use cups made of four different materials [polypropylene (PP), polystyrene (PS), polyethylene (PE) coated paper cups and expanded polystyrene (EPS)] into the water was investigated. The number of MPs ranged from 126 p/L to 1420 p/L, while the highest and lowest counts were observed in the PP (50 °C for 20 min) and PE-coated paper cups (4 °C 0 min), respectively. Washing the cups with ultrapure water prior to use reduced the MP release by 52-65%. SEM images demonstrated the abrasion on the surface of the disposable cups as a result of hot water exposure. Intensities of FTIR absorbance levels at some wavelengths were decreased by the water treatment, which could be evidence of surface abrasion. The annual MP exposure of consumers was calculated as 18,720-73,840 by the consumption of hot and cold beverages in disposable cups. In conclusion, as the level and potential toxicity of MP exposure in humans are not yet fully known, this study sheds light on the number of MPs transferred to cold and hot beverages from single-use disposable cups.

Landscape and risk assessment of microplastic contamination in farmed oysters and seawater along the coastline of China

Microplastic (MP) pollution poses a significant threat to marine ecosystem and seafood safety. However, comprehensive and comparable assessments of MP profiles and their ecological and health in Chinese farming oysters are lacking. This study utilized laser infrared imaging spectrometer (LDIR) to quantify MPs in oysters and its farming seawater at 18 sites along Chinese coastlines. Results revealed a total of 3492 MPs in farmed oysters and seawater, representing 34 MP types, with 20-100 µm MP fragments being the dominant. Polyurethane (PU) emerged as the predominant MP type in oysters, while polysulfones were more commonly detected in seawater. Notably, oysters from the Bohai Sea exhibited a higher abundance of MPs (13.62 ± 2.02 items/g) and estimated daily microplastic intake (EDI, 2.14 ± 0.26 items/g/kg·bw/day), indicating a greater potential health risk in the area. Meanwhile, seawater from the Yellow Sea displayed a higher level (193.0 ± 110.7 items/L), indicating a greater ecological risk in this region. Given the pervasiveness and abundance of PU and its high correlation with other MP types, we proposed PU as a promising indicator for monitoring and assessing the risk MP pollution in mariculture in China. These findings provide valuable insights into the extent and characteristics of MP pollution in farmed oysters and seawater in China.

Microplastics in Asian rivers: Geographical distribution, most detected types, and inconsistency in methodologies

Microplastics pose a significant environmental threat, with potential implications for toxic chemical release, aquatic life endangerment, and human food chain contamination. In Asia, rapid economic growth coupled with inadequate waste management has escalated plastic pollution in rivers, positioning them as focal points for environmental concern. Despite Asia's rivers being considered the most polluted with plastics globally, scholarly attention to microplastics in the region's freshwater environments is a recent development. This study undertakes a systematic review of 228 scholarly articles to map microplastic hotspots in Asian freshwater systems and synthesize current research trends within the continent. Findings reveal a concentration of research in China and Japan, primarily investigating riverine and surface waters through net-based sampling methods. Polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) emerge as the predominant microplastic types, frequently observed as fibers or fragments. However, the diversity of sampling methodologies and reporting metrics complicates data synthesis, underscoring the need for standardized analytical frameworks to facilitate comparative analysis. This paper delineates the distribution of microplastic hotspots and outlines the prevailing challenges and prospects in microplastic research within Asian freshwater contexts.

Occurrence, distribution and sources of microplastics in typical marine recirculating aquaculture system (RAS) in China: The critical role of RAS operating time and microfilter

Industrial mariculture, a vital means of providing high quality protein to humans, is a potential source of microplastics (MPs) which have recently received increasing attention. This study investigated the occurrence and distribution of microplastics in feed, source water and recirculating aquaculture system (RAS) with long & short operating times as well as in fish from typical industrial mariculture farms in China. Results showed that microplastics occurred in all samples with the average concentration of 3.53 ± 1.39 particles/g, 0.70 ± 0.17 particles/L, 1.53 ± 0.21 particles/L and 2.21 ± 0.62 particles/individual for feed, source water, RAS and fish, respectively. Microplastics were mainly fiber in shape, blue in color and 20-500 μm in size. Compared with short operated RAS, long operating time led to higher microplastic concentration in RAS, especially that of microplastic in 20-500 μm, granular and blue. Regardless of short or long operating time, microplastics in RAS mainly gathered in culture tank, tank before microfilter and fixed-bed biological filter, and the microfilter removed efficiently the microplastic with the shape of film, granule, fragment as well as those with size > 1000 μm. As for the polymer types, polyamide (PA, 71.9 %) and polyethylene terephthalate (PET, 65.7 %) dominated in feed and source water, respectively, which may be the reason for the high proportion of PA (38.8 % and 26.4 %) and PET (31.8 % and 30.2 %) in RAS and fish. In addition, polypropylene (PP) was also detected in RAS (18.7 %) and fish (22.6 %), indicating that other plastic facilities such as PP brush carrier also made a contribution. Positive matrix factorization (PMF) model revealed three sources of MP in RAS, namely plastic facilities, industrial sewage and plastic packaging products. Our results provided a theoretical basis for the management of MP in RAS.

The first reported values of microplastics in prostate

BACKGROUND

Microplastics are ubiquitous, widespread environmental pollutants with unavoidable human exposure. Herein, it was aimed to investigate the presence of microplastics in prostate tissue.

METHODS

Prostate tissues from 12 patients who underwent Trans Urethral Resection of the Prostate (TUR-P) were analyzed to investigate the presence of microplastics. Initially, the prostate tissues were analyzed for microplastic particles using a light microscope after extraction. Subsequently, the chemical composition of the particles found in the prostate tissues was characterized using Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectrophotometry.

RESULTS

Microplastic particles of various types were detected in 6 out of 12 patients. All detected plastic particles in this study were microplastics, with sizes below 26 μm in size. These microplastics exhibited different shapes as pellets, spheres or fibers. Overall, among the 12 analyzed prostate tissue samples, four different types of plastic were identified in six samples. The most common type of microplastic detected was Polyamide (Nylon 6), found in samples from three patients. Other detected types, Polypropylene, Polyacrylic Acid and Poly (dimethylsiloxane) were each determined in samples from one patient.

CONCLUSIONS

This is the first study to demonstrate the presence of microplastics in prostate tissue, serving as an exploratory investigation, which can trigger further research to validate the results in a larger patient cohort.

The triple exposure nexus of microplastic particles, plastic-associated chemicals, and environmental pollutants from a human health perspective

The presence of microplastics (MPs) is increasing at a dramatic rate globally, posing risks for exposure and subsequent potential adverse effects on human health. Apart from being physical objects, MP particles contain thousands of plastic-associated chemicals (i.e., monomers, chemical additives, and non-intentionally added substances) captured within the polymer matrix. These chemicals are often migrating from MPs and can be found in various environmental matrices and human food chains; increasing the risks for exposure and health effects. In addition to the physical and chemical attributes of MPs, plastic surfaces effectively bind exogenous chemicals, including environmental pollutants (e.g., heavy metals, persistent organic pollutants). Therefore, MPs can act as vectors of environmental pollution across air, drinking water, and food, further amplifying health risks posed by MP exposure. Critically, fragmentation of plastics in the environment increases the risk for interactions with cells, increases the presence of available surfaces to leach plastic-associated chemicals, and adsorb and transfer environmental pollutants. Hence, this review proposes the so-called triple exposure nexus approach to comprehensively map existing knowledge on interconnected health effects of MP particles, plastic-associated chemicals, and environmental pollutants. Based on the available data, there is a large knowledge gap in regard to the interactions and cumulative health effects of the triple exposure nexus. Each component of the triple nexus is known to induce genotoxicity, inflammation, and endocrine disruption, but knowledge about long-term and inter-individual health effects is lacking. Furthermore, MPs are not readily excreted from organisms after ingestion and they have been found accumulated in human blood, cardiac tissue, placenta, etc. Even though the number of studies on MPs-associated health impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs' effects on human health in order to address existing and future knowledge gaps.

Impact of nano- and micro-sized polystyrene beads on larval survival and growth of the Pacific oyster Crassostrea gigas

This study successionally monitored how nano- and micro-sized polystyrene beads (MNPs) influence larval mortality, growth, and attachment behavior of the Pacific oyster Crassostrea gigas related to MNP diameter and concentration. D-shaped larvae were sequentially exposed to three-diameter MNPs (0.55, 3.00, 6.00 µm) at five concentrations (0, 0.1, 1.0, 10, 20 μg/mL), and their mortality, growth stages and attachment were observed daily until they die. In addition, MNP intake and accumulation in larvae at each growth stage were determined using fluorescent beads. Deterioration in larval growth and survival was observed under all the exposure conditions, while significant negative effects on the growth parameters were defined with smaller MNPs at lower concentrations. Fluorescent signals were detected in larval digestive tracts at all except D-shaped larval stage, and on the mantle and foot in pediveligers. Therefore, MNP intake adversely affects larval physiological conditions by the synchronal effects of MNP size and concentration. Our findings highlight the implications of MNP characteristics on Pacific oyster larvae, emphasizing the interplay between size, concentration, and physiological responses, crucial for mitigating nanoparticle pollution in marine ecosystems.

Neurotoxicities induced by micro/nanoplastics: A review focusing on the risks of neurological diseases

Pollution of micro/nano-plastics (MPs/NPs) is ubiquitously prevalent in the environment, leading to an unavoidable exposure of the human body. Despite the protection of the blood-brain barrier, MPs/NPs can be transferred and accumulated in the brain, which subsequently exert negative effects on the brain. Nevertheless, the potential neurodevelopmental and/or neurodegenerative risks of MPs/NPs remain largely unexplored. In this review, we provide a systematic overview of recent studies related to the neurotoxicity of MPs/NPs. It covers the environmental hazards and human exposure pathways, translocation and distribution into the brain, the neurotoxic effects, and the possible mechanisms of environmental MPs/NPs. MPs/NPs are widely found in different environment matrices, including air, water, soil, and human food. Ambient MPs/NPs can enter the human body by ingestion, inhalation and dermal contact, then be transferred into the brain via the blood circulation and nerve pathways. When MPs/NPs are present in the brain, they can initiate a series of molecular or cellular reactions that may harm the blood-brain barrier, cause oxidative stress, trigger inflammatory responses, affect acetylcholinesterase activity, lead to mitochondrial dysfunction, and impair autophagy. This can result in abnormal protein folding, loss of neurons, disruptions in neurotransmitters, and unusual behaviours, ultimately contributing to the initiation and progression of neurodegenerative changes and neurodevelopmental abnormalities. Key challenges and further research directions are also proposed in this review as more studies are needed to focus on the potential neurotoxicity of MPs/NPs under realistic conditions.

Microplastic contamination in filter-feeding oyster Saccostrea cuccullata: Novel insights in a marine ecosystem

Microplastic (MP) pollution has become a pressing global concern. Oysters are well-known filter feeders who ingest food by filtering microscopic particles suspended in the surrounding water. Along with organic matter, filter-feeding also causes accidental ingestion of MP by oysters. Hence, the aim of the current investigation is to understand the MP contamination in filter-feeding oysters. A total of 500 specimens of oyster Saccostrea cuccullata collected from the intertidal zone of five sampling locations on the Gujarat coast, India. Specimens underwent analysis following established protocols. Each specimen was found to exhibit MP contamination, showing an abundance of 2.72 ± 1.98 MPs/g. A negative relationship was found between shell length and MP abundance. Predominantly, fibers were documented across all study sites. Black, blue, and red-colored MPs with 1-2 mm sizes were most dominant. MP polymer composition was identified as polyethylene terephthalate and polypropylene. Findings provide baseline information on levels of MPs contamination, which can be used to monitor future effects of MP pollution.

Microplastic contamination in salt-cured fish and commercial sea salts: an emerging food safety threat in relation to UN Sustainable Development Goals (SDGs)

Microplastic (MP) contamination in seafood, particularly processed varieties like dried and salt-cured fish, poses a significant threat to human health. This study investigated MP levels in 22 salt-cured fish species and commercial sea salts along the Indian east coast. Results showed substantially higher MP concentrations compared to global averages, with fragments and fibres (< 250 µm) composing 70% of identified MPs, primarily PVC and PS polymers (> 55%). Station 2 exhibited high pollution levels, with salt-cured fish averaging 54.06 ± 14.48 MP items/g and salt containing 23.53 ± 4.2 MP items/g, indicating a high hazard risk index. A modest correlation was observed between MP abundance, morphotypes, polymer composition in the salt, and their impact on fish products. Given the critical link between food safety, security, and public health, further research is imperative to mitigate MP contamination, aligning with UN Sustainable Development Goals (Goal 2, Goal 3, Goal 14, and Goal 15) for enhanced food safety and security.

Fast compressive Raman micro-spectroscopy to image and classify microplastics from natural marine environment

The fast and reliable detection of micron-sized plastic particles from the natural marine environment is an important topic that is mostly addressed using spontaneous Raman spectroscopy. Due to the long (>tens of ms) integration time required to record a viable Raman signal, measurements are limited to a single point per microplastic particle or require very long acquisition times (up to tens of hours). In this work, we develop, validate, and demonstrate a compressive Raman technology using binary spectral filters and single-pixel detection that can image and classify six types of marine microplastic particles over an area of 1 mm2 with a pixel dwell time down to 1.75 ms/pixel and a spatial resolution of 1 µm. This is x10-100 faster than reported in previous studies.

Toxicological Research on Nano and Microplastics in Environmental Pollution: Current Advances and Future Directions

This review explains the sources of nanoplastics (NPs) and microplastics (MPs), their release, fate, and associated health risks in the aquatic environment. In the 21st century, scientists are grappling with a major challenge posed by MPs and NPs. The global production of plastic has skyrocketed from 1.5 million tons in the 1950s to an astonishing 390.7 million tons in 2021. This pervasive presence of these materials in our environment has spurred scientific inquiry into their potentially harmful effects on living organisms. Studies have revealed that while MPs, with their larger surface area, are capable of absorbing contaminants and pathogens from the surroundings, NPs can easily be transferred through the food chain. As a result, living organisms may ingest them and accumulate them within their bodies. Due to their minuscule size, NPs are particularly difficult to isolate and quantify. Furthermore, exposure to both NPs and MPs has been linked to various adverse health effects in aquatic species, including neurological impairments, disruption of lipid and energy metabolism, and increased susceptibility to cytotoxicity, oxidative stress, inflammation, and reactive oxygen species (ROS) production. It is alarming to note that MPs have even been detected in commercial fish, highlighting the severity of this issue. There are also challenges associated with elucidating the toxicological effects of NPs and MPs, which are discussed in detail in this review. In conclusion, plastic pollution is a pressing issue that governments should tackle by ensuring proper implementation of rules and regulations at national and provincial levels to reduce its health risks.

Mixture toxicity of 6PPD-quinone and polystyrene nanoplastics in zebrafish

Plastic pollution, including micro- and nanoplastics, is a growing concern. Tyre-wear particles (TWPs) are the second largest source of microplastics in the ocean following abrasion of synthetic fibres. In addition to the particles themselves, TWPs contain many harmful chemicals, including 6PPD. This chemical reacts with atmospheric ozone and forms the toxic compound 6PPD-quinone (6PPDq), which poses a danger to aquatic life. There is a knowledge gap in understanding risks associated with the combined toxicity of nanoplastics (NPs) and 6PPDq. The present study aimed to investigate the toxicity of NPs and 6PPDq on adult zebrafish using phenotypic (behaviour, histology) and transcriptomic endpoints. Zebrafish were exposed to four treatments: control (contaminant-free), 50 μg/L 6PPDq, 3 mg/L polystyrene (PS)-NPs, and a combination of 50 μg/L 6PPDq and 3 mg/L PS-NPs. We did not observe locomotory dysregulation in zebrafish exposed to NPs. However, we found significant hyperlocomotion in zebrafish exposed to 6PPDq and this effect was even more substantial after co-exposure with PS-NPs. This study explores the molecular mechanisms behind these effects, identifying genes associated with neurotransmitters and fatty acid metabolism that were dysregulated by the co-exposure. Transcriptomic analysis further showed that both 6PPDq and PS-NPs impacted cellular processes associated with sterol biosynthesis, cholesterol metabolism, and muscle tissue development. The effects on these mechanisms were stronger in co-exposed zebrafish, indicating a heightened risk to cellular integrity and mitochondrial dysfunction. These results highlight the significance of mixture toxicity when studying the effects of NPs and associated chemicals like 6PPDq.

Identification and Visualization of Polystyrene Microplastics/Nanoplastics in Flavored Yogurt by Raman Imaging

The contamination of food by microplastics has garnered widespread attention, particularly concerning the health risks associated with small-sized microplastics. However, detecting these smaller microplastics in food poses challenges attributed to the complexity of food matrices and instrumental and method limitations. Here, we employed Raman imaging for visualization and identification of polystyrene particles synthesized in polymerization reactions, ranging from 400 to 2600 nm. We successfully developed a quantitative model of particle size and concentration for polystyrene, exhibiting excellent fit (R2 of 0.9946). We established procedures for spiked flavored yogurt using synthesized polystyrene, providing fresh insights into microplastic extraction efficiency. Recovery rates calculated from models validated the method's feasibility. In practical applications, the assessment of the size, type, shape, and quantity of microplastics in unspiked flavored yogurt was conducted. The most common polymers found were polystyrene, polypropylene, and polyethylene, with the smallest polystyrene sizes ranging from 1 to 10 μm. Additionally, we conducted exposure assessments of microplastics in branded flavored yogurt. This study established a foundation for developing a universal method to quantify microplastics in food, covering synthesis of standards, method development, validation, and application.

Polyethylene, whose surface has been modified by UV irradiation, induces cytotoxicity: A comparison with microplastics found in beaches

Microplastics, plastic particles 5 mm or less in size, are abundant in the environment; hence, the exposure of humans to microplastics is a great concern. Usually, the surface of microplastics found in the environment has undergone degradation by external factors such as ultraviolet rays and water waves. One of the characteristics of changes caused by surface degradation of microplastics is the introduction of oxygen-containing functional groups. Surface degradation alters the physicochemical properties of plastics, suggesting that the biological effects of environmentally degraded plastics may differ from those of pure plastics. However, the biological effects of plastics introduced with oxygen-containing functional groups through degradation are poorly elucidated owing to the lack of a plastic sample that imitates the degradation state of plastics found in the environment. In this study, we investigated the degradation state of microplastics collected from a beach. Next, we degraded a commercially available polyethylene (PE) particles via vacuum ultraviolet (VUV) irradiation and showed that chemical surface state of PE imitates that of microplastics in the environment. We evaluated the cytotoxic effects of degraded PE samples on immune and epithelial cell lines. We found that VUV irradiation was effective in degrading PE within a short period, and concentration-dependent cytotoxicity was induced by degraded PE in all cell lines. Our results indicate that the cytotoxic effect of PE on different cell types depends on the degree of microplastic degradation, which contributes to our understanding of the effects of PE microplastics on humans.

Microplastic contamination in different shell length in Tivela mactroides (Born, 1778)

Microplastic identification and distribution throughout oceans has become a great concern due to its substantial uprising and its consequent interactions with marine biota. Microplastics can be absorbed and adsorbed by several marine species owing to their very small size. Among these organisms are bivalves, including ones used as food for humans. In this context, this research aims to understand the absorption scale of microplastics by Tivela mactroides according to their size and consequently life stage. Thus, T. mactroides mussels were collected at Camburi Beach (Brazil) and grouped into 30 different size classes from 06 to 35 mm. Later, 20 specimens from each size class (N = 600) had the soft tissues removed and a pool was performed through digestion with 10 % KOH solution. Results showed the presence of microplastics in all size classes of T. mactroides, evidencing that organisms from 06 mm can already be contaminated by microplastics and a tendency of the number of microplastics particles to increase as shell size increases. Furthermore, the amount of blue filament-type MPs was significantly higher than the other types and colors. Additionally, analyzes performed by Raman spectroscopy showed that the blue filaments have a PET composition. Finally, larger individuals presented larger quantities of MPs, as well as larger filaments. This might suggest that there are differences between the assimilation of the size of MPs in the different size classes, i.e. that size makes a difference.

A Novel High-Throughput Detection Method for Plastic Debris in Organic-Rich Matrices Based on Image Fusion

Plastic pollution pervades natural environments and wildlife. Consequently, high-throughput detection methods for plastic debris are urgently needed. A novel method was developed to detect plastic debris larger than 0.5 mm, which integrated an extraction method with low organic loss and plastic damage alongside a classification method for fused images. This extraction method broadened the size range of the remaining plastic debris, while the fusion solved the low spatial resolution of hyperspectral images and the absence of spectral information in red-green-blue (RGB) images. This method was validated for plastic debris in digestate, compost, and sludge, with extraction demonstrating 100% recovery rates for all samples. After fusion, the spatial resolution of hyperspectral images was improved about five times. Classification recall for the fused hyperspectral images achieved 97 ± 8%, surpassing 83 ± 29% of the raw images. Application of this method to solid digestate detected 1030 ± 212 items/kg of plastic debris, comparable with the conventional Fourier transform infrared spectroscopic result of 1100 ± 436 items/kg. This developed method can investigate plastic debris in complex matrices, simultaneously addressing a wide range of sizes and types. This capability helps acquire reliable data to predict secondary microplastic generation and conduct a risk assessment.

Microplastics in the Volta Lake: Occurrence, distribution, and human health implications

Pollution of plastic waste in aquatic ecosystems in Ghana is of significant concern with potential adverse effects on food safety and ecosystem function. This study examined the abundance and distribution of microplastics (MPs) in freshwater biota samples namely: the African river prawn (Macrobrachium vollenhovenii), the Volta clam (Galatea paradoxa), Nile tilapia (Oreochromis niloticus), and sediment from the Volta Lake. Both biota and sediment samples were subjected to microscopic identification and FTIR analysis. In biota samples, the highest mean microplastic abundance of 4.7 ± 2.1 items per individual was found in the prawn, while the Nile tilapia recorded the least (2.8 ± 0.6 items per individual). A total of 398 microplastic particles were observed in sediment samples from the Volta Lake. Microfibers were the major plastic shapes identified in biota and sediment samples. We examined the relationship between microplastic abundance, biota size, and sediment properties. Despite the lack of statistical significance, microplastic shape, size, and polymer composition in assessed organisms mirrored those in the benthic sediment. Polyethylene, polypropylene, polyester, and polystyrene were the four dominant polymer types identified in the organisms and sediments. Although the estimated human exposure was relatively low compared with studies from other regions of the world, the presence of microplastics raises concern for the safety of fisheries products consumed by the general populace in the country. This research is essential for developing effective mitigation measures and tackling the wider effects of microplastic contamination on Ghana's freshwater ecosystems, particularly the Volta Lake.

Microplastics weaken the exoskeletal mechanical properties of Pacific whiteleg shrimp Litopenaeus vannamei

The ubiquitous presence of microplastics (MPs) in aquatic environments poses a significant threat to crustaceans. Although exoskeleton quality is critical for crustacean survival, the impact of MPs on crustacean exoskeletons remains elusive. Our study represents a pioneering effort to characterize the effects of MPs exposure on crustacean exoskeletons. In this study, the mechanical properties of whiteleg shrimp Litopenaeus vannamei exoskeletons were analyzed after exposure to environmentally realistic levels of MPs. Nanoindentation data demonstrated that MPs exposure significantly increased the hardness and modulus of both the carapace and abdominal segments of L. vannamei. Moreover, fractures and embedded MPs were detected on the exoskeleton surface using SEM-EDS analysis. Further analysis demonstrated that the degree of chitin acetylation (DA) in the shrimp exoskeleton, as indicated by FTIR peaks, was reduced by MPs exposure. In addition, exposure to MPs significantly inhibited the muscle Ca2+-ATPase activity and hemolymph calcium levels. Transcriptome and metabolome analyses revealed that the expression levels of genes encoding key enzymes and metabolites in the chitin biosynthetic pathway were significantly affected by MPs exposure. In conclusion, MPs at environmentally relevant concentrations may affect the exoskeletal mechanical properties of L. vannamei through a comprehensive mechanism involving the disruption of the crystalline structure of chitin, assimilation into the exoskeleton, and dysregulation of exoskeleton biosynthesis-related pathways.

Efficacy of bacterial cellulose hydrogel in microfiber removal from contaminated waters: A sustainable approach to wastewater treatment

Microfibers (MFs), the dominant form of microplastics in ecosystems, pose a significant environmental risk due to the inadequacy of existing wastewater treatments to remove them. Recognising the need to develop sustainable solutions to tackle this environmental challenge, this research aimed to find an eco-friendly solution to the pervasive problem of MFs contaminating water bodies. Unused remnants of bacterial cellulose (BC) were ground to form a hydrogel-form of bacterial cellulose (BCH) and used as a potential bioflocculant for polyacrylonitrile MFs. The flocculation efficiency was evaluated across various operational and environmental factors, employing response surface methodology computational modelling to elucidate and model their impact on the process. The results revealed that the BCH:MFs ratio and mixing intensity were key factors in flocculation efficiency, with BCH resilient across a range of environmental conditions, achieving a 93.6 % average removal rate. The BCH's strong retention of MFs released only 8.3 % of the MFs, after a 24-hour wash, and the flocculation tests in contaminated wastewater and chlorinated water yielded 89.3 % and 86.1 % efficiency, respectively. Therefore, BCH presents a viable, sustainable, and effective approach for removing MFs from MFs-contaminated water, exhibiting exceptional flocculation performance and adaptability. This pioneer study using BCH as a bioflocculant for MFs removal sets a new standard in sustainable wastewater treatment, catalysing research on fibrous pollutant mitigation for environmental protection.

Field and laboratory microplastics uptake by a freshwater shrimp

Microplastics are widespread pollutants, but few studies have linked field prevalence in organisms to laboratory uptakes. Aquatic filter feeders may be particularly susceptible to microplastic uptake, with the potential for trophic transfer to higher levels, including humans. Here, we surveyed microplastics from a model freshwater shrimp, common caraidina (Caridina nilotica) inhabiting the Crocodile River in South Africa to better understand microplastic uptake rates per individual. We then use functional response analysis (feeding rate as a function of resource density) to quantify uptake rates by shrimps in the laboratory. We found that microplastics were widespread in C. nilotica, with no significant differences in microplastic abundances among sampled sites under varying land uses, with an average abundance of 6.2 particles per individual. The vast majority of microplastics found was fibres (86.1%). Shrimp microplastic accumulation patterns were slightly higher in the laboratory than the field, where shrimp exhibited a hyperbolic Type II functional response model under varying exposure concentrations. Maximum feeding rates of 20 particles were found over a 6 h feeding period, and uptake evidenced at even the lowest laboratory concentrations (~10 particles per mL). These results highlight that microplastic uptake is widespread in field populations and partly density dependent, with field concentrations corroborating uptake rates recorded in the laboratory. Further research is required to elucidate trophic transfer from these taxa and to understand potential physiological impacts.

Deciphering the seasonal dynamics of microplastic morphotypes and associated co-contaminants along the northwest coast of India

In the present study, the northwest coast of India, bordering the Arabian Sea, was selected to evaluate the microplastic (MP) abundance. This is the first study to emphasize the effects of different seasons on MP distribution. The collected MPs were dried, segregated, and evaluated based on their morphotype, size, color, and polymer type. A total of 1756.6, 7326.6, and 202 particles/kg of sand were estimated in the pre-monsoon, monsoon and post-monsoon seasons, respectively, with a dominance of polypropylene (PP) type of plastic in the pre-monsoon and high-density polyethylene (HDPE) in monsoon and post-monsoon seasons. HDPE and PP collected MPs during the monsoon season were further characterized for associated contaminants. Metal absorbance was detected using SEM-EDX mapping and ICP-MS. The presence of organic compounds (OCs) was analyzed using GC-MS. MPs exhibit distinct associations with metals, among which the HDPE pellet morphotype exhibits a higher range of metal adsorption. Total 61 different OCs were associated with MPs. The HDPE pellets contained the highest amounts of hydrophobic organic compounds. PP pellets were found to contain triglycerides, fatty aldehydes, and alkaloids, along with HOCs. Among morphotypes, pellet forms of MPs were found to adsorb more contaminants. These co-contaminants infiltrate the study area through sewage runoff and shoreline debris deposition, subsequently interacting with MPs. Furthermore, the MP diversity was studied by employing the MP diversity integrated index, which suggests that most of the MP diversity was observed in the pre-monsoon period. The pollution load index employed an MP risk assessment, which presented a low degree of MP contamination. In contrast, the polymer hazard index was calculated as 21650.3 in post-monsoon, placing the area under the extreme danger category. It is evident from the data that the types of MP is more important than their number. Thus, MP morphotypes have importance in the adsorption of co-contaminants.

In Vivo Tissue Distribution of Polystyrene or Mixed Polymer Microspheres and Metabolomic Analysis after Oral Exposure in Mice

BACKGROUND

Global plastic use has consistently increased over the past century with several different types of plastics now being produced. Much of these plastics end up in oceans or landfills leading to a substantial accumulation of plastics in the environment. Plastic debris slowly degrades into microplastics (MPs) that can ultimately be inhaled or ingested by both animals and humans. A growing body of evidence indicates that MPs can cross the gut barrier and enter into the lymphatic and systemic circulation leading to accumulation in tissues such as the lungs, liver, kidney, and brain. The impacts of mixed MPs exposure on tissue function through metabolism remains largely unexplored.

OBJECTIVES

This study aims to investigate the impacts of polymer microspheres on tissue metabolism in mice by assessing the microspheres ability to translocate across the gut barrier and enter into systemic circulation. Specifically, we wanted to examine microsphere accumulation in different organ systems, identify concentration-dependent metabolic changes, and evaluate the effects of mixed microsphere exposures on health outcomes.

METHODS

To investigate the impact of ingested microspheres on target metabolic pathways, mice were exposed to either polystyrene (5 μ m ) microspheres or a mixture of polymer microspheres consisting of polystyrene (5 μ m ), polyethylene (1 - 4 μ m ), and the biodegradability and biocompatible plastic, poly-(lactic-co-glycolic acid) (5 μ m ). Exposures were performed twice a week for 4 weeks at a concentration of either 0, 2, or 4 mg / week via oral gastric gavage. Tissues were collected to examine microsphere ingress and changes in metabolites.

RESULTS

In mice that ingested microspheres, we detected polystyrene microspheres in distant tissues including the brain, liver, and kidney. Additionally, we report on the metabolic differences that occurred in the colon, liver, and brain, which showed differential responses that were dependent on concentration and type of microsphere exposure.

DISCUSSION

This study uses a mouse model to provide critical insight into the potential health implications of the pervasive issue of plastic pollution. These findings demonstrate that orally consumed polystyrene or mixed polymer microspheres can accumulate in tissues such as the brain, liver, and kidney. Furthermore, this study highlights concentration-dependent and polymer type-specific metabolic changes in the colon, liver, and brain after plastic microsphere exposure. These results underline the mobility within and between biological tissues of MPs after exposure and emphasize the importance of understanding their metabolic impact. https://doi.org/10.1289/EHP13435.

First register of microplastic contamination in oysters (Crassostrea gasar) farmed in Amazonian estuaries

The present study investigated the contamination of oysters farmed in Amazonian estuaries by microplastics (MPs). A total of 120 adult oysters (Crassostrea gasar) were collected from four sites along the Mangrove Coast of Pará/Brazil: S1, S2, S3 and S4, with 30 oyster for each. Overall, 58.33 % of the oyster samples contained microplastics, with mean concentrations of 0.23 MPs/g and 1.9 MPs/ind. The concentration of microplastics varied among the four sites, where S1 and S3 had the highest values while S4 had the lowest. PA fibers were the majority of particles (91 %), followed by PS fragments (9 %). The hepatopancreas and the gonad concentrated more microplastics than the rest of the body. As an important species for aquaculture in Amazon, we recommend additional regulation to reduce human exposure to microplastics, such as the installation of depuration facilities and constant monitoring of the contamination of oysters from farms in the region.

Occurrence of microplastics in fish gastrointestinal tracts belongs to different feeding habits from the Bangladesh coast of the Bay of Bengal

The Bay of Bengal (BoB) is home to a range of commercially important species with different food habits and feeding features. Microplastic (MP) contamination in the fish of BoB, like in many other marine environments, is a significant environmental concern. The study aimed to investigate the presence of microplastics (MPs) in the gastrointestinal tracts (GITs) of selected commercial marine fishes from the Bangladesh coast of the BoB. Six fish species (Escualosa thoracata, Tenualosa ilisha, Johnius belangerii, Trichiurus lepturus, Planiliza parsia, and Mystus gulio) were investigated (n = 120) following hydrogen peroxide digestion, and floatation (saline solution) protocols. After analyses, a total number of 696 MPs (dimension 0.3 to 5 mm) were identified. Moreover, the highest occurrence of MPs in fish GITs was found in planktivorous fish (average of 7.7 items/individual), followed by omnivorous (average of 5.2 items/individual), and carnivorous fish (average of 4.6 items/individual) (p < 0.001). However, planktivorous E. thoracata showed the highest number of MPs per g of GIT (average of 30.99 items/g GIT), whereas T. ilisha showed the lowest count (average of 0.77 items/g GIT). Different types of MPs (fibers (19 to 76%), fragments (6 to 61%), films (8 to 35%), microbeads (0 to 5%), and foams (0 to 2%)) were also observed. In terms of the color of MPs, the transparent, black, green, and blue types were the most common. Polymers were found as polyethylene (35 to 43%), polyethylene terephthalate (28 to 35%), polyamide (20 to 31%), and polystyrene (0 to 7%). The study provides a significant incidence of MPs in fish from the Bangladesh part of the BoB, which is very concerning. Therefore, long-term research is indispensable to ascertain the variables affecting the presence of MPs in fish, their origins, and their potential effects on the BoB fisheries. Stringent policies on plastic use and disposal should be strongly urged in this coastal region.

Exploring the impact of polystyrene microplastics on human health: unravelling the health implications of polystyrene microplastics (PS-MPs): a comprehensive study on cytotoxicity, reproductive health, human exposure, and exposure assessment

This investigation explores the various impacts that polystyrene microplastics (PS-MPs) have on human health. As most of the plastic materials affect human health when they release leachable toxic substances that affect human health, this causes a negative effect that determines poor health conditions and leads to health hazards associated with plastic toxins routed in the human body, such as: Polychlorinated Biphenyls, Polybrominated Biphenyls etc. The study includes micro-plastic exposure assessment on testicular structure analysis, and cytotoxicity evaluations of different human cell types. The findings clarified the possible dangers of PS-MPs exposure from food, medications, and common products, emphasising the necessity of standard specimen handling procedures for precise biomonitoring.

Assessment of microplastic contamination in shrimps from the Bay of Bengal and associated human health risk

Microplastics (MPs) were analyzed in seven shrimp species Tiger shrimp (Penaeus monodon), Red tiger shrimp (Caridina cantonensis), Indian shrimp (Penaeus indicus), Red shrimp (Metapenaeus dobsoni), White shrimp (Penaeus merguiensis), Brown shrimp (Metapenaeus monoceros), and Roshna shrimp (Palaemon styliferus) collected from the Bay of Bengal. The abundance and characteristics of MPs were assessed in the gastrointestinal tract (GIT), which certainly translocated to the muscle of shrimp species. The highest MP abundance was found in C. cantonensis with 7.2 items/individual (25.3 items/g in the GIT and 6.3 items/g in muscle). The prominent types of MPs in shrimp samples were fibers (30 %) and fragments (29 %). The ingestion rate of MPs of black and transparent color was comparatively higher, with 64 % of the ingested MPs were < 100 μm. The primary polymer types detected based on Fourier Transform Infrared (FTIR) analysis were Low-Density Polyethylene (LDPE), High-Density Polyethylene (HDPE), Polymethyl Methacrylate (PMMA), Polyvinyl Chloride (PVC), Polypropylene (PP), and Ethylene Vinyl Acetate (EVA). Results from Scanning Electron Microscopy (SEM) showed rough surface textures and adhered particles on the MPs isolated from shrimps. The margin of exposure for females was 71.42, and for males, it was 80.64, indicating that women in Bangladesh are more likely to be exposed to MPs and face a higher risk than men. Sensitivity analysis revealed that MPs particle size was the most sensitive parameter. These findings provide a comprehensive understanding of MP ingestion, human exposure, and contamination in shrimps of Bangladesh, which can help future monitoring efforts.

Are you drowned in microplastic pollution? A brief insight on the current knowledge for early career researchers developing novel remediation strategies

Microplastics (MPs) composed of different polymers with various shapes, within a vast granulometric distribution (1 μm - 5 mm) and with a wide variety of physicochemical surface and bulk characteristics spiral around the globe, with different atmospheric, oceanic, cryospheric, and terrestrial residence times, while interacting with other pollutants and biota. The challenges of microplastic pollution are related to the complex relationships between the microplastic generation mechanisms (physical, chemical, and biological), their physicochemical properties, their interactions with other pollutants and microorganisms, the changes in their properties with aging, and their small sizes that facilitate their diffusion and transportation between the air, water, land, and biota, thereby promoting their ubiquity. Early career researchers (ERCs) constitute an essential part of the scientific community committed to overcoming the challenges of microplastic pollution with their new ideas and innovative scientific perspectives for the development of remediation technologies. However, because of the enormous amount of scientific information available, it may be difficult for ERCs to determine the complexity of this environmental issue. This mini-review aims to provide a quick and updated overview of the essential insights of microplastic pollution to ERCs to help them acquire the background needed to develop highly innovative physical, chemical, and biological remediation technologies, as well as valorization proposals and environmental education and awareness campaigns. Moreover, the recommendations for the development of holistic microplastic pollution remediation strategies presented here can help ERCs propose technologies considering the environmental, social, and practical dimensions of microplastic pollution while fulfilling the current government policies to manage this plastic waste.

New insights into the size-independent bioactive potential of pristine and UV-B aged polyethylene microplastics

The present study investigates the morphological, physicochemical, and structural changes occurred by the UV-B aging process of low-density polyethylene microplastics (LDPE MPs), as well as the bioactive potential of both pristine and UVaged MPs towards healthy peripheral blood lymphocytes. Specifically, LDPE MPs (100-180 μm) prepared by mechanical milling of LDPE pellets, were UV-B irradiated for 120 days (wavelength 280 nm; temperature 25 °C; relative humidity 50 %) and further examined for alterations in their particle size and surface, their functional groups, thermal stability, and crystallinity (by means of SEM, FTIR spectroscopy, XRD patterns, and TGA measurements, respectively). In parallel, isolated human peripheral blood lymphocytes were treated with different concentrations (25-500 μg mL-1) of either pristine or aged MPs (UVfree and UV120d LDPE MPs) for assessing the cytogenotoxic (by means of trypan blue exclusion test and the cytokinesis-block micronucleus assay using cytochalasin-B) and oxidative effects (using the DCFH-DA staining) in both cases. According to the results, UVfree and UV120d-LDPE MPs, with a size ranging from 100 to 180 μm, can differentially promote cytogenotoxic and oxidative alterations in human lymphocytes. In fact, UVfree LDPE MPs not being able to be internalized by cells due to their size, could indirectly promote the onset of mild oxidative and cytogenotoxic damage in human peripheral lymphocytes, via a dose-dependent but size-independent manner. The latter is more profound in case of the irregular-shaped UV120d-LDPE MPs, bearing improved dispersibility and sharp edges (by means of cracks and holes), as well as oxygen-containing and carbonyl groups. To our knowledge, the present findings provide new data regarding the bioactive behavior of pristine and UV-B aged LDPE MPs, at least in the in vitro biological model tested, thus giving new evidence for their size-independent and/or indirect mode of action.

Regulatory Science Perspective on the Analysis of Microplastics and Nanoplastics in Human Food

Microplastics are increasingly reported, not only in the environment but also in a wide range of food commodities. While studies on microplastics in food abound, the current state of science is limited in its application to regulatory risk assessment by a continued lack of standardized definitions, reference materials, sample collection and preparation procedures, fit-for purpose analytical methods for real-world and environmentally relevant plastic mixtures, and appropriate quality controls. This is particularly the case for nanoplastics. These methodological challenges hinder robust, quantitative exposure assessments of microplastic and nanoplastic mixtures from food consumption. Furthermore, limited toxicological studies on whether microplastics and nanoplastics adversely impact human health are also impeded by methodology challenges. Food safety regulatory agencies must consider both the exposure and the risk of contaminants of emerging concern to ascertain potential harm. Foundational to this effort is access to and application of analytical methods with the capability to quantify and characterize micro- and nanoscale sized polymers in complex food matrices. However, the early stages of method development and application of early stage methods to study the distribution and potential health effects of microplastics and nanoplastics in food have largely been done without consideration of the stringent requirements of methods to inform regulatory activities. We provide regulatory science perspectives on the state of knowledge regarding the occurrence of microplastics and nanoplastics in food and present our general approach for developing, validating, and implementing analytical methods for regulatory purposes.

Characteristics of microplastics in the atmosphere of Anyang City

In order to clarify the characteristics of microplastics in the atmosphere of Anyang city, TSP, PM10, and PM2.5 samples are collected when the ambient air quality is good, slightly polluted, and severely polluted. After pretreatment, the physical and chemical characteristics are observed and identified by using stereomicroscope and micro-infrared spectrometer. The results show that the average abundance of microplastics is 0.19 items/m3, 0.26 items/m3, and 0.42 items/m3, respectively, when the ambient air quality is good, light pollution, and heavy pollution in Anyang City. It can be seen that with the decline of ambient air quality, the average abundance of microplastics in TSP, PM2.5, and PM10 gradually increases. The black fiber strip microplastics account for about 80% of the total TSP, PM2.5, and PM10 in the ambient air of Anyang City, followed by yellow flake and black granular microplastics and a small amount of green, red, and blue fiber strip microplastics. AQI has a good correlation with the abundance of microplastics in TSP, PM10, and PM2.5, and the maximum microplastic trapping effect could be obtained according to the sampling method of PM2.5 in the ambient air. The main components of microplastics are cellophane, followed by PET and EVA. The explorations of human respiratory exposure risk assessment show that with the increase of AQI, the daily intake of microplastics in adults also increased. At high levels of pollution, the human body breathes an average of 222 ± 5 microplastics per day.

Identification of marine microplastics based on laser-induced fluorescence and principal component analysis

Although the laser-induced fluorescence method shows great potential for microplastic particle detection, overlapping fluorescence signals make accurate type and proportion identification difficult. This paper presents the identification of marine microplastics based on laser-induced fluorescence and principal component analysis. This method works by measuring the fluorescence spectra of water-containing microplastic samples irradiated with a 405-nm laser, which are then analyzed using the principal component analysis (PCA) method. The nine types of microplastics were differentiated based on their positions in the PCA score plot. The mixed sample was positioned between the pure microplastic samples. The component ratio determines its position relative to that of the pure microplastic samples. The first two principal components of the mixed microplastics were linearly dependent. Natural seawater had less influence on the detection, and a mass concentration as low as 0.03% was detected.

The size-dependence and reversibility of polystyrene nanoplastics-induced lipid accumulation in mice: Possible roles of lysosomes

Nanoplastics (NPs) continue to accumulate in global aquatic and terrestrial systems, posing a potential threat to human health through the food chain and/or other pathways. Both in vivo and in vitro studies have confirmed that the liver is one of the main organs targeted for the accumulation of NPs in living organisms. However, whether exposure to NPs induces size-dependent disorders of liver lipid metabolism remains controversial, and the reversibility of NPs-induced hepatotoxicity is largely unknown. In this study, the effects of long-term exposure to environmentally relevant doses of polystyrene nanoplastics (PS-NPs) on lipid accumulation were investigated in terms of autophagy and lysosomal mechanisms. The findings indicated that hepatic lipid accumulation was more pronounced in mice exposed to 100 nm PS-NPs compared to 500 nm PS-NPs. This effect was effectively alleviated after 50 days of self-recovery for 100 nm and 500 nm PS-NPs exposure. Mechanistically, although PS-NPs exposure activated autophagosome formation through ERK (mitogen-activated protein kinase 1)/mTOR (mechanistic target of rapamycin kinase) signaling pathway, the inhibition of Rab7 (RAB7, member RAS oncogene family), CTSB (cathepsin B), and CTSD (cathepsin D) expression impaired lysosomal function, thereby blocking autophagic flux and contributing to hepatic lipid accumulation. After termination of PS-NPs exposure, lysosomal exocytosis was responsible for the clearance of PS-NPs accumulated in lysosomes. Furthermore, impaired lysosomal function and autophagic flux inhibition were effectively alleviated. This might be the main reason for the alleviation of PS-NPs-induced lipid accumulation after recovery. Collectively, we demonstrate for the first time that lysosomes play a dual role in the persistence and reversibility of hepatotoxicity induced by environmental relevant doses of NPs, which provide novel evidence for the prevention and intervention of liver injury associated with nanoplastics exposure.

Environmental and ecological risk of microplastics in the surface waters and gastrointestinal tract of skipjack tuna (Katsuwonus pelamis) around the Lakshadweep Islands, India

The presence of microplastics (MPs) in marine ecosystems is widespread and extensive. They have even reached the deepest parts of the ocean and polar regions. The number of articles on plastic pollution has increased in recent years, but few have investigated the MPs from oceanic islands which are biodiversity hotspots. We investigated the possible microplastic contamination their source and characteristics in surface waters off Kavaratti Island and in the gastrointestinal tract (GT) of skipjack tuna, Katsuwonus pelamis collected from Kavaratti Island of the Lakshadweep archipelago. A total of 424 MP particles were isolated from the surface water samples collected from off Kavaratti Island with an average abundance of 5 ± 1nos./L. A total of 117 MPs were recovered from the GT of skipjack tuna from 30 individual fishes. This points to a potential threat of MP contamination in seafood around the world since this species has a high value in local and international markets. Fiber and blue color were the most common microplastic morphotypes and colors encountered, respectively, both from surface water and GT of fish. Smaller MPs (0.01-1 mm) made up a greater portion of the recovered materials, and most of them were secondary MPs. Polyethylene and polypropylene were the most abundant polymers found in this study. The Pollution Load Index (1.3 ± 0.21) of the surface water and skipjack tuna (1 ± 0.7) indicates a minor ecological risk for the coral islands, while the Polymer Hazard Index highlights the ecological risk of polymers, even at low MP concentrations. This pioneer study sheds preliminary light on the abundance, properties, and environmental risks of MPs to this highly biodiverse ecosystem.

Effects of nanoplastics exposure on ingestion, life history traits, and dimethyl sulfide production in rotifer Brachionus plicatilis

Microplastics (MPs) and nanoplastics (NPs) have gained global concern due to their detrimental effects on marine organisms. We investigated the effects of 80 nm polystyrene (PS) NPs on life history traits, ingestion, and dimethyl sulfide (DMS) and dimethylsulfoniopropionate (DMSP) production in the rotifer Brachionus plicatilis. Fluorescently labeled 80 nm PS NPs were ingested by the rotifer B. plicatilis and accumulated in the digestive tract. The lethal rates of B. plicatilis exposed to NPs were dose-dependent. High concentrations of PS NPs exposure had negative effects on developmental duration, leading to prolonged embryonic development and pre-reproductive periods, shortened reproductive period, post-reproductive period, and lifespan in B. plicatilis. High concentrations of PS NPs exposure inhibited life table demographic parameters such as age-specific survivorship and fecundity, generation time, net reproductive rate, and life expectancy. Consequently, the population of B. plicatilis was adversely impacted. Furthermore, exposure to PS NPs resulted in a reduced ingestion rate in B. plicatilis, as well as a decreased in DMS, particulate DMSP (DMSPp) concentration, and DMSP lyase activity (DLA), which exhibited a dose-response relationship. B. plicatilis grazing promoted DLA and therefore increased DMS production. PS NPs exposure caused a decline in the increased DMS induced by rotifer grazing. Our results help to understand the ecotoxicity of NPs on rotifer and their impact on the biogeochemical cycle of dimethylated sulfur compounds.

Sediment-associated microplastics in Chilika lake, India: Highlighting their prevalence, polymer types, possible sources, and ecological risks

The primary objective of this research was to assess microplastics (MPs) in the sediments of Chilika lake. MPs were extracted from 22 sediment samples using the density separation method combined with vacuum pump filtration. A stereo-zoom microscope and Raman spectroscopy were employed to identify the sediment-associated MPs. The total MPs collected from all 22 sites was 440 ± 3.53 particles kg-1 wet sediments, with sizes ranging between 50 and 500 μm. In terms of morphology, fibers and fragments emerged as the dominant MP types, with counts of 210 ± 1.66 and 175 ± 1.76 particles kg-1 wet sediments, respectively. Raman spectroscopy verified the presence of various MP polymers in the sediments, predominantly HDPE (37 %), followed by PS (20 %), PET (18 %), PA (11 %), PP (7 %), and PC (7 %). A notable color variation was observed in MPs; black being the most prevalent (38.8 %), succeeded by blue (19.5 %), green (11.8 %), white (11.5 %), red (10.6 %), and transparent (7.5 %). ANOVA results indicated significant (p > 0.05) variations in MP abundance across the 22 sampling locations. However, principal component analysis (PCA) and multiple regression analysis indicated that water quality parameters did not significantly influence MP abundance, yet it was found that MP retention was higher in fine-grained sediments like clay and silt. The leading sources of MPs in Chilika lake were found to be aquafarming, trailed by river and sewage discharges, fishing activities, antifouling coatings and tourism. Additionally, the pollution load index (PLI) was employed to gauge the ecological risks, categorizing the lake under risk category 1, which implies a minimal level of MPs pollution. This research aims to serve as an early warning system for MPs pollution in productive brackish water habitats globally, including Chilika lake, guiding policymakers towards appropriate management strategies and preventive measures.

Prevalence of microplastics in Peruvian mangrove sediments and edible mangrove species

Mangrove ecosystems have been hypothesised as a potential sink of microplastic debris, which could pose a threat to mangrove biota and ecological function. In this field-study we establish the prevalence of microplastics in sediments and commercially-exploited Anadara tuberculosa (black ark) and Ucides occidentalis (mangrove crab) from five different zones in the mangrove ecosystem of Tumbes, Peru. Microplastic were evident in all samples, with an average of 726 ± 396 microplastics/kg for the sediment, although no differences between the different zones of the mangrove ecosystem were observed. Microplastic concentrations were 1.6± 1.1 items/g for the black ark and 1.9 ± 0.9 microplastics/g for the mangrove crab, with a difference in the microplastic abundance between species (p < 0.05), and between the gills and stomachs of the crab (p < 0.01). Human intake of microplastics from these species, for the population in Tumbes, is estimated at 431 items per capita per year. The outcomes of this work highlight that the mangrove ecosystem is widely contaminated with microplastics, presenting a concern for the marine food web and food security.

The pollution characteristics and risk assessment of microplastics in mollusks collected from the Bohai Sea

Microplastics (MPs) pollution in the marine environment has become a global problem. In this study, a number of 21 mollusk species (n = 2006) with different feeding habits were collected from 11 sites along the Bohai Sea for MPs uptake analysis. The MPs in mollusk samples were isolated and identified by micro-Fourier Transform Infrared Spectroscopy (μ-FTIR), and an assessment of the health risks of MPs ingested by mollusk consumption is also conducted. Approximately 91.9 % of the individuals among all the collected species inhaled MPs, and there was an average abundance of 3.30 ± 2.04 items·individual-1 or 1.04 ± 0.74 items·g-1 of wet weight. The shape of MPs was mainly fiber, and a total number of 8 polymers were detected, of which rayon had the highest detection rate (58.3 %). The highest abundance, uptake rate and polymer composition of MPs was observed in creeping types, suggesting that they might ingest these MPs from their food. The gastropod Siphonalia subdilatata contains the highest levels of MPs, which may increase the risk of human exposure if consumed whole without removing the digestive gland. The polymer risk level of MPs in these mollusks was Level III (H = 299), presenting harmful MPs such as polyvinyl chloride. In terms of human exposure risk, the average risk of human exposure to MPs through consumption of Bohai mollusks is estimated to be 3399 items·(capita·year)-1 (424-9349 items·(capita·year)-1). Overall, this study provides a basis for the ecological and health Risk assessment of MPs in mollusks collected from the coastline of China.

Occurrence, transport, and toxicity of microplastics in tropical food chains: perspectives view and way forward

Microplastics, which have a diameter of less than 5 mm, are becoming an increasingly prevalent contaminant in terrestrial and aquatic ecosystems due to the dramatic increase in plastic production to 390.7 million tonnes in 2021. Among all the plastics produced since 1950, nearly 80% ended up in the environment or landfills and eventually reached the oceans. Currently, 82-358 trillion plastic particles, equivalent to 1.1-4.9 million tonnes by weight, are floating on the ocean's surface. The interactions between microorganisms and microplastics have led to the transportation of other associated pollutants to higher trophic levels of the food chain, where microplastics eventually reach plants, animals, and top predators. This review paper focuses on the interactions and origins of microplastics in diverse environmental compartments that involve terrestrial and aquatic food chains. The present review study also critically discusses the toxicity potential of microplastics in the food chain. This systematic review critically identified 206 publications from 2010 to 2022, specifically reported on microplastic transport and ecotoxicological impact in aquatic and terrestrial food chains. Based on the ScienceDirect database, the total number of studies with "microplastic" as the keyword in their title increased from 75 to 4813 between 2010 and 2022. Furthermore, various contaminants are discussed, including how microplastics act as a vector to reach organisms after ingestion. This review paper would provide useful perspectives in comprehending the possible effects of microplastics and associated contaminants from primary producers to the highest trophic level (i.e. human health).

To what extent is blue mussels caging representative of microplastics in the natural environment?

Bivalves have gained prominence in active biomonitoring of microplastics (MPs) pollution. Nevertheless, critical questions persist regarding blue mussels' selectivity and representativeness of the presence of microplastics in the natural environments. In this current study, we explored short- and long-term exposure durations for caged mussels, aiming to establish the minimum period required for them to attain a steady-state in microplastics retention and investigate their selectivity in a real-world context. Various deployment periods (1, 2, and 5 weeks) were tested, with concurrent collection of MPs from the surrounding water each week. The results revealed a significant increase in ingested MPs, reaching a threshold of approximately 1.4 MPs per gram of wet weight during the fifth week of caging. The characteristics of MPs found in mussels exhibited some differences from those collected in the surrounding waters and were less temporally variable. Notably, the collected caged mussels demonstrated a tendency to retain smaller particles (<80 μm). This study underscores complex processes governing MPs selection in natural environments and the need for further research to gain a more comprehensive understanding of the conditions and suitability of mussels as bioindicators for assessing MPs pollution.

Microplastics as carriers of toxic pollutants: Source, transport, and toxicological effects

Microplastic pollution has emerged as a new environmental concern due to our reliance on plastic. Recent years have seen an upward trend in scholarly interest in the topic of microplastics carrying contaminants; however, the available review studies have largely focused on specific aspects of this issue, such as sorption, transport, and toxicological effects. Consequently, this review synthesizes the state-of-the-art knowledge on these topics by presenting key findings to guide better policy action toward microplastic management. Microplastics have been reported to absorb pollutants such as persistent organic pollutants, heavy metals, and antibiotics, leading to their bioaccumulation in marine and terrestrial ecosystems. Hydrophobic interactions are found to be the predominant sorption mechanism, especially for organic pollutants, although electrostatic forces, van der Waals forces, hydrogen bonding, and pi-pi interactions are also noteworthy. This review reveals that physicochemical properties of microplastics, such as size, structure, and functional groups, and environmental compartment properties, such as pH, temperature, and salinity, influence the sorption of pollutants by microplastic. It has been found that microplastics influence the growth and metabolism of organisms. Inadequate methods for collection and analysis of environmental samples, lack of replication of real-world settings in laboratories, and a lack of understanding of the sorption mechanism and toxicity of microplastics impede current microplastic research. Therefore, future research should focus on filling in these knowledge gaps.

Exposure of U.S. adults to microplastics from commonly-consumed proteins

We investigated microplastic (MP) contamination in 16 commonly-consumed protein products (seafoods, terrestrial meats, and plant-based proteins) purchased in the United States (U.S.) with different levels of processing (unprocessed, minimally-processed, and highly-processed), brands (1 - 4 per product type, depending on availability) and store types (conventional supermarket and grocer featuring mostly natural/organic products). Mean (±stdev) MP contamination per serving among the products was 74 ± 220 particles (ranging from 2 ± 2 particles in chicken breast to 370 ± 580 in breaded shrimp). Concentrations (MPs/g tissue) differed between processing levels, with highly-processed products containing significantly more MPs than minimally-processed products (p = 0.0049). There were no significant differences among the same product from different brands or store types. Integrating these results with protein consumption data from the American public, we estimate that the mean annual exposure of adults to MPs in these proteins is 11,000 ± 29,000 particles, with a maximum estimated exposure of 3.8 million MPs/year. These findings further inform estimations of human exposure to MPs, particularly from proteins which are important dietary staples in the U.S. Subsequent research should investigate additional drivers of MPs in the human diet, including other understudied food groups sourced from both within and outside the U.S.

Evaluation of microplastic pollution and risk assessment in a tropical monsoonal estuary, with special emphasis on contamination in jellyfish

Estuaries, which serve as vital links between land and coastal ecosystems, play a significant part in facilitating the transfer of plastic waste from the land to the ocean. In this research, we examined the prevalence, characteristics, and ecological risks of microplastics (MPs) in the extensively urbanized Cochin Estuarine System (CES), India. Additionally, it represents one of the initial evidence-based examinations of MPs ingestion by jellyfish in Indian waters, focusing on Acromitus flagellatus, Blackfordia virginica, and Pleurobrachia pileus species. The abundance of MPs found in the surface water of the Cochin Estuarine System (CES) varied between 14.44 ± 9 to 30 ± 15.94 MP/m3, with an average of 21.6 ± 11 MP/m3. In both surface waters and jellyfish from the Cochin Estuarine System (CES), fibers were the most prevalent type of MPs, with polyethylene (PE), polypropylene (PP), and polyamide (PA) being the most common polymer varieties. To evaluate the current levels of MPs and their effect on the CES, the Pollution Load Index (PLI), Potential Ecological Risk Index (PERI), and Polymeric Risk Index (H) were utilized. The high PLIestuary values (20.33), high Hestuary values (234.02), and extreme PERIestuary value (1646.06) indicate that the CES is facing an extreme ecological risk. Among the 280 jellyfish individuals examined, 118 (42.14%) were recognized to contain MPs with an average of 1.54 ± 2.68 MPs/individual. Pearson bivariate analysis revealed a significant correlation between the jellyfish bell size and number of plastics per individual. Comparison between jellyfish species revealed, the majority (66%) of the MPs identified in jellyfish were from A. flagellatus and 44 among the 50 jellyfish examined (88%) had MPs. These findings suggest that A. flagellatus may be a potential sink for MPs and may be utilized to be a bioindicator for monitoring MPs contamination in estuarine systems, aiding in future plastic pollution mitigation efforts.

A comprehensive review on the source, ingestion route, attachment and toxicity of microplastics/nanoplastics in human systems

Microplastics (MPs)/nanoplastics (NPs) are widely found in the natural environment, including soil, water and the atmosphere, which are essential for human survival. In the recent years, there has been a growing concern about the potential impact of MPs/NPs on human health. Due to the increasing interest in this research and the limited number of studies related to the health effects of MPs/NPs on humans, it is necessary to conduct a systematic assessment and review of their potentially toxic effects on human organs and tissues. Humans can be exposed to microplastics through ingestion, inhalation and dermal contact, however, ingestion and inhalation are considered as the primary routes. The ingested MPs/NPs mainly consist of plastic particles with a particle size ranging from 0.1 to 1 μm, that distribute across various tissues and organs within the body, which in turn have a certain impact on the nine major systems of the human body, especially the digestive system and respiratory system, which are closely related to the intake pathway of MPs/NPs. The harmful effects caused by MPs/NPs primarily occur through potential toxic mechanisms such as induction of oxidative stress, generation of inflammatory responses, alteration of lipid metabolism or energy metabolism or expression of related functional factors. This review can help people to systematically understand the hazards of MPs/NPs and related toxicity mechanisms from the level of nine biological systems. It allows MPs/NPs pollution to be emphasized, and it is also hoped that research on their toxic effects will be strengthened in the future.

The Occurrence of Microplastics in Donax trunculus (Mollusca: Bivalvia) Collected along the Tuscany Coast (Mediterranean Sea)

Microplastics (MPs) (0.1 µm-5 mm particles) have been documented in oceans and seas. Bivalve molluscs (BMs) can accumulate MPs and transfer to humans through the food chain. BMs (especially mussels) are used to assess MPs' contamination, but the genus Donax has not been thoroughly investigated. The aim of this study was to detect and characterize MPs in D. trunculus specimens collected along the Tuscan coast (Italy), and to assess the potential risk for consumers. The samples (~10 g of tissue and intervalval liquid from 35 specimens) were digested using a solution of 10% KOH, subjected to NaCl density separation, and filtered through 5 μm pore-size filters. All items were morphologically classified and measured, and their mean abundance (MA) was calculated. Furthermore, 20% of them were analyzed by Raman spectroscopy and, based on the obtained results, the MA was recalculated (corrected MA) and the annual human exposure was estimated. In the 39 samples analyzed, 85 items fibers (n = 45; 52.94%) and fragments (n = 40; 47.06%) were found. The MA was 0.23 ± 0.17 items/grww. Additionally, 83.33% of the items were confirmed as MPs (polyethylene and polyethylene terephthalate). Based on the correct MA (0.18 MPs/grww), D. trunculus consumers could be exposed to 19.2 MPs/per capita/year. The health risk level of MPs was classified as level III (moderate).

Deciphering the Role of the Gut Microbiota in Exposure to Emerging Contaminants and Diabetes: A Review

Emerging pollutants, a category of compounds currently not regulated or inadequately regulated by law, have recently become a focal point of research due to their potential toxic effects on human health. The gut microbiota plays a pivotal role in human health; it is particularly susceptible to disruption and alteration upon exposure to a range of toxic environmental chemicals, including emerging contaminants. The disturbance of the gut microbiome caused by environmental pollutants may represent a mechanism through which environmental chemicals exert their toxic effects, a mechanism that is garnering increasing attention. However, the discussion on the toxic link between emerging pollutants and glucose metabolism remains insufficiently explored. This review aims to establish a connection between emerging pollutants and glucose metabolism through the gut microbiota, delving into the toxic impacts of these pollutants on glucose metabolism and the potential role played by the gut microbiota.

Micro(nano)plastics in the Human Body: Sources, Occurrences, Fates, and Health Risks

The increasing global attention on micro(nano)plastics (MNPs) is a result of their ubiquity in the water, air, soil, and biosphere, exposing humans to MNPs on a daily basis and threatening human health. However, crucial data on MNPs in the human body, including the sources, occurrences, behaviors, and health risks, are limited, which greatly impedes any systematic assessment of their impact on the human body. To further understand the effects of MNPs on the human body, we must identify existing knowledge gaps that need to be immediately addressed and provide potential solutions to these issues. Herein, we examined the current literature on the sources, occurrences, and behaviors of MNPs in the human body as well as their potential health risks. Furthermore, we identified key knowledge gaps that must be resolved to comprehensively assess the effects of MNPs on human health. Additionally, we addressed that the complexity of MNPs and the lack of efficient analytical methods are the main barriers impeding current investigations on MNPs in the human body, necessitating the development of a standard and unified analytical method. Finally, we highlighted the need for interdisciplinary studies from environmental, biological, medical, chemical, computer, and material scientists to fill these knowledge gaps and drive further research. Considering the inevitability and daily occurrence of human exposure to MNPs, more studies are urgently required to enhance our understanding of their potential negative effects on human health.

Microplastic pollution in wild and aquacultured Mediterranean mussels from the Sea of Marmara: Abundance, characteristics, and health risk estimations

Microplastic (MP) pollution raises urgent concerns about the environmental well-being and the safety of the food supply for humans. Mussels are essential filter-feeding organisms that may be highly susceptible to MPs uptake due to their global distribution and sedentary lifestyle. There is also a knowledge gap regarding MP levels in commercially-farmed and wild-sourced mussels for human consumption, creating gaps in risk identification for food safety. This study aims to fill this gap in understanding by (a) investigating the presence and abundance of MPs in both wild and aquacultured mussels collected from six different stations in the Sea of Marmara, (b) comparing the levels of MPs between aquacultured and wild mussels, and (c) evaluating the potential health risks associated with the consumption of these contaminated mussels. Polymer types were verified by ATR-FTIR (Attenuated Total Reflectance Fourier Transform- Infrared Spectroscopy), and 6 different polymers have been identified. Among the total 753 identified MPs, the majority (79.8%) were fibers, with the predominant size range (42.4%) falling between 0.1 and 0.5 mm. Consuming wild mussels was associated with a 187.6% higher risk of MP intake compared to aquaculture. A consumer can potentially be exposed to 133.11 to 844.86 MP particles when consuming a 100 g serving of mussels, with risks becoming more significant as portion sizes increase, as is the case in some countries where portions reach 225 g. In this study, detailed information is presented on MP pollution in both wild and aquacultured mussels from Sea of Marmara, providing valuable insights for ensuring food safety, effective management and control of MP pollution in this region.