Perfluoroalkyl substances (PFAS) in river and ground/drinking water of the Ganges River basin: Emissions and implications for human exposure

Juncus sarophorus, a native Australian species, tolerates and accumulates PFOS, PFOA and PFHxS in a glasshouse experiment

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) have been identified as emerging contaminants of public health concern. With PFAS now detected globally in a wide range of environments, there is an urgent need for effective remedial treatment solutions at the field scale. Phytoremediation presents a potential remediation strategy for PFAS that would allow efficient and cost-effective remediation at large scales. This study examined the potential for the Australian native wetland plant Juncus sarophorus to tolerate, take up, and accumulate PFOS, PFOA and PFHxS. A 190-day glasshouse experiment was conducted, in which 0, 10 and 100 μg/L each of PFOS, PFOA and PFHxS were used to irrigate J. sarophorus in potted soil. The results suggest that J. sarophorus has a high tolerance to PFAS and is effective at accumulating and transferring PFHxS and PFOA from soils to above ground biomass. Together with its high growth rate, J. sarophorus appears to be, in principle, a suitable candidate for phytoextraction of short-chained PFAS compounds. It is, however, less efficient at uptake of PFOS, owing to the long chain-lengths of this compound and PFOSs' ability to sorb effectively to soils. The total accumulated PFAS mass at the end of the experiment was ~2000 μg/kg biota_{(wet weight)} and ~170 μg/kg biota_{(wet weight)} for soils irrigated with 100 μg/L and 10 μg/L for each PFAS compound, translating into overall PFAS removal rates of 11% and 9%.

Emerging pharma residue contaminants: Occurrence, monitoring, risk and fate assessment - A challenge to water resource management

Water is one of the important gifts to mankind. In recent days the accessibility of pharmaceuticals in the environment is progressively a worldwide concern. The significant wellspring of these contaminations in water assets is drugs for human use or veterinary medications. Intermediates, active metabolites and raw materials present in water from pharmaceutical industry waste because of incomplete sewage treatment systems. Various pharmaceutical components such as analgesic/antipyretics such as Ibuprofen (57.9-104 ng/L), Diclofenac (17-129 ng/L), antibiotics such as Sulfamethoxazole (28.7-124.5 ng/L), Sulfamethazine (29.2-83.9 ng/L), Azithromycin (10-68 ng/L), psychiatric drug such as Carbamazepine (9.3-92.4 ng/L), stimulants such as caffeine greater than 55 ng/L, antidepressants, antihypertensive, contraceptives etc., are present in water resources and have been detected in mg/L to μg/L range. The synergic effects and ecotoxicological hazard assessment must be developed. Studies demonstrate that these drugs might cause morphological, metabolic and sex alterations on sea-going species, and interruption of biodegradation activities. Hazard analysis and assessments are in progress. However, the conventional effluent treatment methods are not sufficient to remove API (active pharmaceutical ingredients) from this water effectively. There is necessitate for continuous monitoring of the pharmaceutical compounds in aquatic ecosystem to save the environment and living form of lives from health hazards. This work highlights the hazards, environmental assessment and the mitigation measures of pharmaceutical pollutants.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

Application of native plants in constructed floating wetlands as a passive remediation approach for PFAS-impacted surface water

Strategies for remediation of per- and polyfluoroalkyl substances (PFAS) generally prioritise highly contaminated source areas. However, the mobility of PFAS in the environment often results in extensive low-level contamination of surface waters across broad areas. Constructed Floating Wetlands (CFWs) promote the growth of plants in buoyant structures where pollutants are assimilated into plant biomass. This study examined the hydroponic growth of Juncus krausii, Baumea articulata and Phragmites australis over a 28-day period for remediation of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) contaminated (0.2 µg/L to 30 µg/L) urban stormwater. With increasing PFOA and PFOS concentrations, accumulation in plant species increased although root and shoot distribution varied depending on PFAS functional group. Less PFOA than PFOS accumulated in plant roots (0.006-0.16 versus 0.008-0.68 µg/g), while more PFOA accumulated in the plant shoots (0.02-0.55 versus 0.01-0.16 µg/g) indicating translocation to upper plant portions. Phragmites australis accumulated the highest overall plant tissue concentrations of PFOA and PFOS. The NanoSIMS data demonstrated that PFAS associated with roots and shoots was absorbed and not just surface bound. These results illustrate that CFWs have the potential to be used to reduce PFAS contaminants in surface waters.

Per- and polyfluoralkyl substances (PFAS) in drinking water system: Target and non-target screening and removal assessment

The massive use and the persistence of per- and polyfluoroalkyl substances (PFAS) have led to their frequent detection in aquatic environments, which may further threaten drinking water safety. So far, our knowledge about the occurrence of PFAS in drinking water system is still very limited. Here we investigated the occurrence and removal of PFAS in a drinking water system using non-target, suspect and target screening strategies. Sampling was performed in three seasons in the drinking water system including a water source, two drinking water treatment plants, and tap water in five households. The results showed detection of 17 homologous series with 51 homologues in non-target screening and 50 potential PFAS detected in suspect screening. Probable structures were proposed for 15 PFAS with high confidence levels (the first three of the five levels), with seven of them being reported for the first time in drinking water system. Semi-quantification was performed on seven homologous series based on target PFAS, the estimated total concentrations for non-target PFAS ranged between 4.10 and 17.6 ng/L. Nine out of 50 target PFAS were found and precisely quantified (<LOQ-13.4 ng/L) with predominance of perfluorocarboxylic acids (PFCA) and perfluorosulfonic acids (PFSA). All target and non-target PFAS were detected in tap water with similar concentrations in all three seasons. Removal efficiency for the detected PFAS in each processing unit was almost zero, indicating the recalcitrance of these chemicals to the conventional treatment process. The findings from this study clearly show the wide presence of PFAS in the whole drinking water treatment process, and suggest an urgent need for effective removal technology for this group of chemicals.

Legacy and Emerging Per- and Polyfluoroalkyl Substances Behave Distinctly in Spatial Distribution and Multimedia Partitioning: A Case Study in the Pearl River, China

Per- and polyfluoroalkyl substances (PFASs) have attracted worldwide attention due to their ubiquitous occurrence, bioaccumulation, and toxicological effects, yet the fate of PFASs in a lotic ecosystem is largely unknown. To elucidate spatial distribution and multimedia partitioning of legacy and emerging PFASs in a lotic river flowing into an estuary, PFASs were synchronously analyzed in water, suspended particulate matter (SPM), sediment, and biota samples collected along Guangzhou reach of the Pearl River, South China. Geographically, the concentrations of PFASs in the water phase showed a decreasing trend from the upper and middle sections (urban area) to the down section (suburban area close to estuary) of the river. While perfluorooctanoic acid predominated in water and SPM, more diverse compositions were observed in sediment and biota with the increase in contributions of long-chain PFASs. Field-derived sediment-water partitioning coefficients (K_d) and bioaccumulation factors (BAFs) of PFASs increased with the increase in perfluorinated carbons. Besides hydrophobicity, water pH and salinity significantly affected the multimedia partitioning of PFASs in a lotic ecosystem. In addition, 87 homologues (63 classes) were identified as emerging PFASs in four media using suspect analysis. Interestingly, K_d and BAF of the emerging PFASs were often higher than legacy PFASs containing the same perfluorinated carbons, raising a special concern on the environmental risk of emerging PFASs.

Distribution, source identification and health risk assessment of PFASs in groundwater from Jiangxi Province, China

There is an urgent need to investigate on the distribution and fate of short-chain analogues and emerging per- and polyfluoroalkyl substances (PFASs) in groundwater, and little research on their source apportionment and health risks through the drinking water exposure pathway has been carried out. In present study, the concentration and source of 22 PFASs, including five alternatives: 6:2 fluorotelomer sulfonate (6:2 FTS), potassium 9-chlorohexadecafluoro-3-oxanonane-1-sulfonate (F-53B), hexafluoropropylene oxide trimer acid (HFPO-TA), hexafluoropropylene oxide dimer acid (HFPO-DA) and ammonium 4, 8-dioxa-3H-perfluorononanoate (ADONA), were analyzed in 88 groundwater samples from wells in Jiangxi Province, southeastern China. The total PFASs concentration (Σ₁₈PFASs) in groundwater varied from 1.27 to 381.00 ng/L (mean 47.60 ng/L). Short-chain perfluorobutanoic acid (PFBA) and perfluoropentanoic acid (PFPeA) were the most abundant perfluorinated carboxylic acids (PFCAs), and short-chain perfluorobutanesulfonate (PFBS) was the most abundant perfluorinated sulfonic acids (PFSAs) in groundwater samples. The quantitative source apportionment by nonnegative matrix/tensor factorization coupled with k-means clustering (NMFk) model suggested that short-chain homologues and emerging alternatives have been used as substitutes for legacy PFOS and PFOA. Furthermore, the human risk assessment results showed that the estimated daily intakes (EDIs) for short-chain PFCAs were higher than that of PFOA, whereas the EDIs of PFBS, 6:2 FTS and F-53B were comparable to that of PFOS.

A systematic approach to understand hydrogeochemical dynamics in large river systems: Development and application to the River Ganges (Ganga) in India

Large river systems, such as the River Ganges (Ganga), provide crucial water resources for the environment and society, yet often face significant challenges associated with cumulative impacts arising from upstream environmental and anthropogenic influences. Understanding the complex dynamics of such systems remains a major challenge, especially given accelerating environmental stressors including climate change and urbanization, and due to limitations in data and process understanding across scales. An integrated approach is required which robustly enables the hydrogeochemical dynamics and underpinning processes impacting water quality in large river systems to be explored. Here we develop a systematic approach for improving the understanding of hydrogeochemical dynamics and processes in large river systems, and apply this to a longitudinal survey (> 2500 km) of the River Ganges (Ganga) and key tributaries in the Indo-Gangetic basin. This framework enables us to succinctly interpret downstream water quality trends in response to the underpinning processes controlling major element hydrogeochemistry across the basin, based on conceptual water source signatures and dynamics. Informed by a 2019 post-monsoonal survey of 81 river bank-side sampling locations, the spatial distribution of a suite of selected physico-chemical and inorganic parameters, combined with segmented linear regression, reveals minor and major downstream hydrogeochemical transitions. We use this information to identify five major hydrogeochemical zones, characterized, in part, by the inputs of key tributaries, urban and agricultural areas, and estuarine inputs near the Bay of Bengal. Dominant trends are further explored by investigating geochemical relationships (e.g. Na:Cl, Ca:Na, Mg:Na, Sr:Ca and NO₃:Cl), and how water source signatures and dynamics are modified by key processes, to assess the relative importance of controls such as dilution, evaporation, water-rock interactions (including carbonate and silicate weathering) and anthropogenic inputs. Mixing/dilution between sources and water-rock interactions explain most regional trends in major ion chemistry, although localized controls plausibly linked to anthropogenic activities are also evident in some locations. Temporal and spatial representativeness of river bank-side sampling are considered by supplementary sampling across the river at selected locations and via comparison to historical records. Limitations of such large-scale longitudinal sampling programs are discussed, as well as approaches to address some of these inherent challenges. This approach brings new, systematic insight into the basin-wide controls on the dominant geochemistry of the River Ganga, and provides a framework for characterising dominant hydrogeochemical zones, processes and controls, with utility to be transferable to other large river systems.

Per- and polyfluoroalkyl substances in water and wastewater: A critical review of their global occurrence and distribution

Per- and polyfluoroalkyl substances (PFAS) are a family of fluorinated organic compounds of anthropogenic origin. Due to their unique chemical properties, widespread production, environmental distribution, long-term persistence, bioaccumulative potential, and associated risks for human health, PFAS have been classified as persistent organic pollutants of significant concern. Scientific evidence from the last several decades suggests that their widespread occurrence in the environment correlates with adverse effects on human health and ecology. The presence of PFAS in the aquatic environment demonstrates a close link between the anthroposphere and the hydrological cycle, and concentrations of PFAS in surface and groundwater range in value along the ng L^-1-μg L^-1 scale. Here, we critically reviewed the research published in the last decade on the global occurrence and distribution of PFAS in the aquatic environment. Ours is the first paper to critically evaluate the occurrence of PFAS at the continental scale and the evolving global regulatory responses to manage and mitigate the adverse human health risks posed by PFAS. The review reports that PFAS are widespread despite being phased out-they have been detected in different continents irrespective of the level of industrial development. Their occurrence far from the potential sources suggests that long-range atmospheric transport is an important pathway of PFAS distribution. Recently, several studies have investigated the health impacts of PFAS exposure-they have been detected in biota, drinking water, food, air, and human serum. In response to the emerging information about PFAS toxicity, several countries have provided administrative guidelines for PFAS in water, including Canada, the United Kingdom, Sweden, Norway, Germany, and Australia. In the US, additional regulatory measures are under consideration. Further, many PFAS have now been listed as persistent organic pollutants. This comprehensive review provides crucial baseline information on the global occurrence, distribution, and regulatory framework of PFAS.

Perfluoroalkyl and Polyfluoroalkyl Substances in Groundwater Used as a Source of Drinking Water in the Eastern United States

In 2019, 254 samples were collected from five aquifer systems to evaluate perfluoroalkyl and polyfluoroalkyl substance (PFAS) occurrence in groundwater used as a source of drinking water in the eastern United States. The samples were analyzed for 24 PFAS, major ions, nutrients, trace elements, dissolved organic carbon (DOC), volatile organic compounds (VOCs), pharmaceuticals, and tritium. Fourteen of the 24 PFAS were detected in groundwater, with 60 and 20% of public-supply and domestic wells, respectively, containing at least one PFAS detection. Concentrations of tritium, chloride, sulfate, DOC, and manganese + iron; percent urban land use within 500 m of the wells; and VOC and pharmaceutical detection frequencies were significantly higher in samples containing PFAS detections than in samples with no detections. Boosted regression tree models that consider 57 chemical and land-use variables show that tritium concentration, distance to the nearest fire-training area, percentage of urban land use, and DOC and VOC concentrations are the top five predictors of PFAS detections, consistent with the hydrologic position, geochemistry, and land use being important controls on PFAS occurrence in groundwater. Model results indicate that it may be possible to predict PFAS detections in groundwater using existing data sources.

Per- and polyfluoroalkyl substances in the atmospheric total suspended particles in Karachi, Pakistan: Profiles, potential sources, and daily intake estimates

Per- and polyfluoroalkyl substances (PFAS) have received continuous attention; however, there is limited understanding of their sources in the atmosphere and related human exposure risks. This study measured PFAS in the atmospheric total suspended particles collected from Karachi, Pakistan, during the winter. Among the quantified PFAS, perfluorobutanoic acid (PFBA) showed the highest average concentration (3.11 ± 2.64 pg/m³), accounting for 32% of the total PFAS. Wind speed was positively correlated with perfluorohexanoic acid (PFHxA) and N-ethyl perfluorooctanesulfonamide (N-EtFOSA), while relative humidity was negatively correlated with perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA). Weighted potential source contribution function (WPSCF) and concentration weighted trajectory (WCWT) analyses suggested that northwestern Pakistan and western Afghanistan areas were highly associated with the long-range atmospheric transport of PFAS. We also calculated the daily intake of PFAS via inhalation, which were in the range of 0.07-3.98 and 0.01-0.33 pg/kg bw/d for children and adults, respectively. The calculated hazard quotient (HQ) of PFOS and PFOA was significantly lower than 1, indicating less or unlikely to cause non-carcinogenic effect via inhalation exposure. Overall, this study contributes to the understanding of geographic origins and human inhalation risks of airborne PFAS on a regional scale.

Poly- and Perfluorinated Alkyl Substances in Air and Water from Dhaka, Bangladesh

Bangladesh hosts extensive textile manufacturing, for some of which per- and polyfluorinated alkyl substances (PFAS) have been used to impart water and dirt repellency, among other things. Textile waste emissions to the atmosphere and discharge into rivers and other bodies of water could present a significant concern for human and ecosystem health, but there is little information on PFAS in Bangladesh. To assess the presence of ionic PFAS and their precursors in air and water from Dhaka, Bangladesh, polyethylene sheets were deployed for 28 days as passive samplers for neutral PFAS in outdoor air and water, while ionic PFAS were measured from discrete water grabs. Fluorotelomer alcohols (FTOHs) were detected at almost all sites in air and water; the most frequently detected compound was 6:2 FTOH, ranging from below instrumental detection limits (<IDL) to 70 ng m^-3 in air and from <IDL to -19 ng L^-1 in water. Of the ionic PFAS, perfluorobutanoic acid (PFBA), perfluorohexanoic acid, perfluorooctanoic acid, perfluorohexane sulfonic acid, and perfluorooctane sulfonic acid dominated in frequency of detection and magnitude, with concentrations ranging from 1.8 to 19.0 ng L^-1 in surface waters. The prevalence of 6:2 FTOH and PFBA across sites probably reflects their use in textile manufacturing and could indicate the industry's switch to shorter-chain PFAS alternatives. Environ Toxicol Chem 2022;41:334-342. © 2021 SETAC.

PFAS Molecules: A Major Concern for the Human Health and the Environment

Per- and polyfluoroalkyl substances (PFAS) are a group of over 4700 heterogeneous compounds with amphipathic properties and exceptional stability to chemical and thermal degradation. The unique properties of PFAS compounds has been exploited for almost 60 years and has largely contributed to their wide applicability over a vast range of industrial, professional and non-professional uses. However, increasing evidence indicate that these compounds represent also a serious concern for both wildlife and human health as a result of their ubiquitous distribution, their extreme persistence and their bioaccumulative potential. In light of the adverse effects that have been already documented in biota and human populations or that might occur in absence of prompt interventions, the competent authorities in matter of health and environment protection, the industries as well as scientists are cooperating to identify the most appropriate regulatory measures, substitution plans and remediation technologies to mitigate PFAS impacts. In this review, starting from PFAS chemistry, uses and environmental fate, we summarize the current knowledge on PFAS occurrence in different environmental media and their effects on living organisms, with a particular emphasis on humans. Also, we describe present and provisional legislative measures in the European Union framework strategy to regulate PFAS manufacture, import and use as well as some of the most promising treatment technologies designed to remediate PFAS contamination in different environmental compartments.

Three-dimensional spatial distribution of legacy and novel poly/perfluoroalkyl substances in the Tibetan Plateau soil: Implications for transport and sources

Driven by increasingly stringent regulations on the legacy poly/perfluoroalkyl (PFASs), a variety of fluorinated alternatives have emerged on the market. Tibetan Plateau (TP) plays an important role in accumulation of organic pollutants due to its high altitude and wet deposition. In this study, the occurrence, spatial distribution and sources of PFASs in the TP soils were investigated. The total concentrations of PFASs ranged from 0.814-4.51 ng/g in the TP soils, with the identification of a variety of novel PFASs, including fluorotelomer sulfonates (FTSs), chlorinated polyfluorinated ether sulfonic acid (Cl-PFESAs), and hexafluoropropylene oxide (HFPO) homologues. Generally, the PFAS concentrations exhibited an increase trend from the west to east, and gradually increased with the altitude increasing, suggesting the impacts of human activities and mountain cold-trapping. The PFASs decreased with the increase of soil depth, but at different extents, which were related to their occurrence time, interactions with organic matters, and microbial transformation in soil. Most of the PFASs were present as free fractions in soil, particularly for the short-chain perfluoroalkyl acids (PFAAs), implying that they were liable to be accumulated in organisms and transport to groundwater. Multiple source apportionment analyses indicated that PFASs in the soil of TP were not only derived from the local pollution, but also from the atmospheric migration influenced by Indian Monsoon and westerly winds.

Novel ssDNA aptamer-based fluorescence sensor for perfluorooctanoic acid detection in water

Per- and polyfluoroalkyl substances (PFAS) are widely detected environmental contaminants, and there is a great need for development of sensor technologies for rapid and continuous monitoring of PFAS. In this study, we have developed fluorescence based aptasensor that can possibly monitor perfluorooctanoic acid (PFOA) in water with limit of detection (LOD) of 0.17 μM. This is first to report the successful isolation of PFAS binding ssDNA aptamers. The obtained aptamer selectively binds PFOA with dissociation constant (K_D) of 5.5 μM. Specific aptamer binding sites to PFOA were identified and the length of the fluorinated carbons was a key binding factor rather than the functional group. The aptamer binding to structurally similar PFAS compounds (i.e., perfluorocarboxylic acids and perfluorosulfonic acids with 4-8 carbon chains) was also investigated; the aptamer K_D values were 6.5 and 3.3 μM for perfluoroheptanoic acid and perfluorohexanesulfonic acid, respectively, while other analogs did not bind to the aptamer. The presence of major inorganic ions and dissolved organic matter had negligible influences on the aptamer performance (<14% at a 10 mM concentration), and the aptamer performance was also robust in real wastewater effluent conditions, with a K_D of 7.4 μM for PFOA. Fluorescence-based aptasensor developed in this study is adequate in monitoring PFOA levels in water contaminated with the accident spills and heavy usage of fire-fighting foams near the industrial sites and military bases. More importantly, the study opens up new capability of aptasensors to efficiently monitor the trace amount of various PFAS compounds and other fluorinated alternatives in natural and engineered water environments.

Occurrence of legacy and emerging poly- and perfluoroalkyl substances in water: A case study in Tianjin (China)

Due to the water solubility and environmentally persistent properties of poly- and perfluoroalkyl substances (PFAS), the contamination of PFAS in drinking water is raising widespread concerns for their potential adverse health risks. In the present study, the behavior of PFAS from source waters to effluent water was analyzed by taking samples from three drinking water sources (Yuqiao Reservoir, Beidagang Reservoir, and Yangtze River) and effluent of several treatment processes used in one drinking water treatment plant (DWTP) of Tianjin (China), including pre-chlorination, coagulation, sand filtration, and chlorination. The range of total concentration of PFAS (∑₂₁PFAS) in three source water was 6.64-19.80 ng/L (Yuqiao Reservoir), 80.00-119.86 ng/L (Beidagang Reservoir), and 15.87 ng/L (Yangtze River), respectively. As for individual PFAS, PFBA (perfluorobutanoic acid) was the most abundant PFAS, followed by PFOA (perfluorooctanoic acid), PFBS (perfluorobutane sulfonate), and PFOS (perfluorooctane sulfonate), especially, 6:2 Cl-PFESA (6:2 Cl-polyflurinated ether sulfonate) was detected in all samples. During treatment, the removal rate of ∑₂₁PFAS was 11%, and the removal rate of long-chain PFAS such as PFNA (perfluorononanoic acid), PFOS, and PFDS (perfluorodecane sulfonate) were relatively higher than short-chain PFAS due to their hydrophobic characteristic. Besides, the influence of seasonal factor (precipitation) on the occurrence and composition characteristics of PFAS in the aquatic environment was also investigated, and the results demonstrated that precipitation affected the total concentrations of PFAS in the aquatic environment, but barely on the composition characteristics of PFAS. Furthermore, the ecological risks could be negligible based on the concentration of PFAS measured in surface water. In the meanwhile, the health risks were also assessed based on the concentration of PFAS detected in drinking water, the result indicated that the concentrations of PFAS were less than the suggested drinking water advisories. In addition, more attention should be paid to the risk caused by the frequently detected emerging PFAS such as 6:2 Cl-PFESA and HFPO-DA (hexafluoropropylene oxide-dimer acid).

Biodegradation of per- and polyfluoroalkyl substances (PFAS): A review

Per- and polyfluoroalkyl substances (PFAS) are a group of chemicals widely manufactured for industrial and commercial applications in the past decades due to their remarkable stability as well as hydrophobic and lipophobic nature. PFAS species have been recognized as emerging environmental contaminants of concern due to their toxicity and environmental persistence, thereby attracting intensive research seeking effective technologies for their removal from the environment. The objective of this review is to provide a thorough analysis of the biodegradation of PFAS in multiple environmental matrices and offer a future outlook. By discussing targeted PFAS species, degradation intermediates, degradation efficiencies, and microbial species, a comprehensive summary of the known microbial species and their degradation pathways are presented. The biodegradation pathways for different types of PFAS species are summarized in two major categories, biodegradation with and without the cleavage of C-F bond. Existing uncertainties and future research directions for PFAS biodegradation are provided.

Surface-water/groundwater boundaries affect seasonal PFAS concentrations and PFAA precursor transformations

Elevated concentrations of per- and polyfluoroalkyl substances (PFAS) in drinking-water supplies are a major concern for human health. It is therefore essential to understand factors that affect PFAS concentrations in surface water and groundwater and the transformation of perfluoroalkyl acid (PFAA) precursors that degrade into terminal compounds. Surface-water/groundwater exchange can occur along the flow path downgradient from PFAS point sources and biogeochemical conditions can change rapidly at these exchange boundaries. Here, we investigate the influence of surface-water/groundwater boundaries on PFAS transport and transformation. To do this, we conducted an extensive field-based analysis of PFAS concentrations in water and sediment from a flow-through lake fed by contaminated groundwater and its downgradient surface-water/groundwater boundary (defined as ≤100 cm below the lake bottom). PFAA precursors comprised 45 ± 4.6% of PFAS (PFAA precursors + 18 targeted PFAA) in the predominantly oxic lake impacted by a former fire-training area and historical wastewater discharges. In shallow porewater downgradient from the lake, this percentage decreased significantly to 25 ± 11%. PFAA precursor concentrations decreased by 85% between the lake and 84-100 cm below the lake bottom. PFAA concentrations increased significantly within the surface-water/groundwater boundary and in downgradient groundwater during the winter months despite lower stable concentrations in the lake water source. These results suggest that natural biogeochemical fluctuations associated with surface-water/groundwater boundaries may lead to PFAA precursor loss and seasonal variations in PFAA concentrations. Results of this work highlight the importance of dynamic biogeochemical conditions along the hydrological flow path from PFAS point sources to potentially affected drinking water supplies.

Per- and Polyfluoroalkyl Substances (PFAS) in Integrated Crop-Livestock Systems: Environmental Exposure and Human Health Risks

Per- and polyfluoroalkyl substances (PFAS) are highly persistent synthetic organic contaminants that can cause serious human health concerns such as obesity, liver damage, kidney cancer, hypertension, immunotoxicity and other human health issues. Integrated crop–livestock systems combine agricultural crop production with milk and/or meat production and processing. Key sources of PFAS in these systems include firefighting foams near military bases, wastewater sludge and industrial discharge. Per- and polyfluoroalkyl substances regularly move from soils to nearby surface water and/or groundwater because of their high mobility and persistence. Irrigating crops or managing livestock for milk and meat production using adjacent waters can be detrimental to human health. The presence of PFAS in both groundwater and milk have been reported in dairy production states (e.g., Wisconsin and New Mexico) across the United States. Although there is a limit of 70 parts per trillion of PFAS in drinking water by the U.S. EPA, there are not yet regional screening guidelines for conducting risk assessments of livestock watering as well as the soil and plant matrix. This systematic review includes (i) the sources, impacts and challenges of PFAS in integrated crop–livestock systems, (ii) safety measures and protocols for sampling soil, water and plants for determining PFAS concentration in exposed integrated crop–livestock systems and (iii) the assessment, measurement and evaluation of human health risks related to PFAS exposure.

A review on emerging micropollutants: sources, environmental concentration and toxicity

Every minute, the environment is filled with pollutants of various types, including physical, chemical, and biological. A new threat has emerged in recent years due to human activity, which is of significant concern. These pollutants are not like conventional pollutants but can alter the physiology of living things, and hence these are named emerging pollutants. The pollutant sources include crop protection chemicals, personal care products, antimicrobial mixtures, active pharmaceutical ingredients (API). These compounds are biologically crucial because their minute quantity can also disrupt an individual's endocrine system, and hence they are also called endocrine disruptors. This current work reviews many aspects, including source, problems, and legislative solutions that have been farmed to cope with the current situation of emerging micropollutants.

Perfluoroalkyl substances (PFASs) in leachate, fly ash, and bottom ash from waste incineration plants: Implications for the environmental release of PFAS

Perfluoroalkyl substances (PFASs) are a family of chemicals widely distributed in daily use consumer products. Most of these products become municipal solid wastes (MSWs) after they have been used. In the present study, we examined different types of PFASs in leachate, fly ash and bottom ash produced from three MSW incineration plants in southern China. High PFAS levels were found in leachate (mean concentration 215 ng/mL, range 21.4-682 ng/mL) from the incineration plants, which indicated large amounts of PFASs in the wastes leached out. The average quantities of PFASs annually discharged from the leachates of the three plants were estimated to be approximately 384 kg (Plant A), 47.3 kg (Plant B), and 2.82 kg (Plant C). Relatively lower levels of PFASs in fly ash (mean 16.4 ng/g, range 1.46-87.6 ng/g) and bottom ash (mean 14.6 ng/g, range 3.11-77.4 ng/g) indicated that high-temperature incineration destroyed most of the PFASs. The wide array of PFASs concentrations in all three matrices illustrated that some PFASs-containing industrial wastes were still entered into local MSW. In general, short chain PFASs, including perfluorobutyric acid (PFBA) and perfluorobutane sulfonate (PFBS), were the primary PFASs in leachate samples. In addition, PFOS was the predominant PFASs in fly ash samples. The results showed that leachate, fly ash, and bottom ash from MSW incineration plants are important vectors of PFASs.

Perfluoroalkyl substances in precipitation from the Tibetan Plateau during monsoon season: Concentrations, source regions and mass fluxes

Atmospheric wet deposition is an important process for the occurrence of perfluoroalkyl substances (PFASs) in polar/remote mountain regions; however, there are limited data on PFASs in precipitation from the Tibetan Plateau (TP). Precipitation (rain from May to October 2017) was therefore collected across the TP to investigate the concentrations, composition profiles, sources, and fluxes of perfluoroalkyl acids (PFAAs). The average ∑PFAA concentrations ranged from 212.3 pg L^-1 to 547.7 pg L^-1, and perfluoroalkyl carboxylic acids (PFCAs) accounted for 87% of the measured PFAAs (mean value). Significant positive associations (p < 0.05) were found for most PFCAs in the southeast TP, indicating that they may come from similar sources. The monthly PFAA deposition flux ranged from 12.6 to 68.9 ng m^-2 month^-1, decreasing from east to west. As climate of the eastern TP is controlled mainly by the Indian monsoon, indicating that the Indian monsoon plays an important role in delivering PFAAs to the TP. PCA (principal component analysis) combined with back-trajectory analysis was used to estimate the atmospheric transport pathways, and the PSCF (potential source contribution function) model was applied to define the potential source regions of individual PFAAs. The results suggested that northeast India, Bangladesh, and southern Nepal are the potential sources of C4-C7 PFCAs; C8-C10 PFCAs are more influenced by emissions from southern Nepal and Bhutan; while the source regions of long-chain PFCAs (C11-C12) can be attributed to northern India and Pakistan. Specifically, PFOS (perfluorooctane sulfonic acid) has a local contribution from the central TP.

Detection and removal of poly and perfluoroalkyl polluting substances for sustainable environment

PFAs (poly and perfluoroalkyl compounds) are hazardous and bioaccumulative chemicals that do not readily biodegrade or neutralize under normal environmental conditions. They have various industrial, commercial, domestic and defence applications. According to the Organization for Economic Co-operation and Development, there are around 4700 PFAs registered to date. They are present in every stream of life, and they are often emerging and are even difficult to be detected by the standard chemical methods. This review aims to focus on the sources of various PFAs and the toxicities they impose on the environment and especially on humankind. Drinking water, food packaging, industrial areas and commercial household products are the primary PFAs sources. Some of the well-known treatment methods for remediation of PFAs presented in the literature are activated carbon, filtration, reverse osmosis, nano filtration, oxidation processes etc. The crucial stage of handling the PFAs occurs in determining and analysing the type of PFA and its remedy. This paper provides a state-of-the-art review of determination & tools, and techniques for remediation of PFAs in the environment. Improving new treatment methodologies that are economical and sustainable are essential for excluding the PFAs from the environment.

Natural and engineered clays and clay minerals for the removal of poly- and perfluoroalkyl substances from water: State-of-the-art and future perspectives

Poly- and perfluoroalkyl substances (PFAS) present globally in drinking-, waste-, and groundwater sources are contaminants of emerging concern due to their long-term environmental persistence and toxicity to organisms, including humans. Here we review PFAS occurrence, behavior, and toxicity in various water sources, and critically discuss their removal via mineral adsorbents, including natural aluminosilicate clay minerals, oxidic clays (Al, Fe, and Si oxides), organoclay minerals, and clay-polymer and clay‑carbon (biochar and graphene oxide) composite materials. Among the many remediation technologies, such as reverse osmosis, adsorption, advanced oxidation and biologically active processes, adsorption is the most suitable for PFAS removal in aquatic systems. Treatment strategies using clay minerals and oxidic clays are inexpensive, eco-friendly, and efficient for bulk PFAS removal due to their high surface areas, porosity, and high loading capacity. A comparison of partition coefficient values calculated from extracted data in published literature indicate that organically-modified clay minerals are the best-performing adsorbent for PFAS removal. In this review, we scrutinize the corresponding plausible mechanisms, factors, and challenges affecting the PFAS removal processes, demonstrating that modified clay minerals (e.g., surfactant, amine), including some commercially available products (e.g., FLUORO-SORB®, RemBind®, matCARE™), show good efficacy in PFAS remediation in contaminated media under field conditions. Finally, we propose future research to focus on the challenges of using clay-based adsorbents for PFAS removal from contaminated water due to the regeneration and safe-disposal of spent clay adsorbents is still a major issue, whilst enhancing the PFAS removal efficiency should be an ongoing scientific effort.

Per and poly-fluoroalkyl substances (PFAS) as a contaminant of emerging concern in surface water: A transboundary review of their occurrences and toxicity effects

Per and poly-fluoroalkyl substances (PFAS) have been recognized as contaminants of emerging concerns by the United States Environmental Protection Agency (US EPA) due to their environmental impact. Several advisory guidelines were proposed worldwide aimed at limiting their occurrences in the aquatic environments, especially for perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA). This review paper aims to provide a holistic review in the emerging area of PFAS research by summarizing the spatiotemporal variations in PFAS concentrations in surface water systems globally, highlighting the possible trends of occurrences of PFAS, and presenting potential human health impacts as a result of PFAS exposure through surface water matrices. From the data analysis in this study, occurrences of PFOA and PFOS in many surface water matrices were observed to be several folds higher than the US EPA health advisory level of 70 ng/L for lifetime exposure from drinking water. Direct discharge and atmospheric deposition were identified as primary sources of PFAS in surface water and cryosphere, respectively. While global efforts focused on limiting usages of long-chain PFAS such as PFOS and PFOA, the practices of using short-chain PFAS such as perfluorobutanoic acid (PFBA) and perfluorobutane sulfonic acid (PFBS) and PFAS alternatives increased substantially. These compounds are also potentially associated with adverse impacts on human health, animals and biota.

Release of soil colloids during flow interruption increases the pore-water PFAS concentration in saturated soil

Groundwater flow through aquifer soils or packed bed systems can fluctuate for various reasons, which could affect the concentration of natural colloids and per- and polyfluoroalkyl substances (PFAS) in the pore water. In such cases, PFAS concentration could either decrease due to matrix diffusion of PFAS or increase by the detachment of colloids carrying PFAS. Yet, the effect of flow fluctuation on PFAS transport or release in porous media has not been examined. To examine the relative importance of either process, we interrupted the flow during an injection of groundwater spiked with perfluorobutanoic acid (PFBA), perfluorooctanoic acid (PFOA), and bromide as conservative tracer through clay-rich soil, so that diffusive transport would be prominent during flow interruption. After flow interruption, the PFAS concentration did not decrease indicating an insignificant contribution of matrix diffusion. The concentration increased, potentially due to enhanced release of colloid-associated PFAS. Analysis of samples before and after flow interruption by particle size analysis and SEM confirmed an increase in soil colloid concentration after the flow interruption. XRD analysis of soil and the colloids proved that PFAS were associated with specific sites of the colloids. Due to a higher affinity of PFOA to soil colloids, the total PFOA concentration in the effluent samples increased more than PFBA after the flow interruption process. The results indicate that colloids may have a disproportionally higher role in the transport of PFAS in conditions that release colloids from porous media. Thus, fluctuations in groundwater flow can increase this colloid facilitated mobility of PFAS.

Isotope and hydrochemical systematics of groundwater from a multi-tiered aquifer in the central parts of Indo-Gangetic Plains, India - Implications for groundwater sustainability and security

The Indo-Gangetic multi-aquifer system provides water supplies to the most populous regions of the Indian subcontinent, however precise knowledge on the sources and dynamics of groundwater is still missing. Environmental isotopes (²H, ¹⁸O, ¹³C, ³H and ¹⁴C) and hydrochemical modeling tools were used in this study in the multi-tiered aquifers underlying the Middle Gangetic Plains (MGP) to investigate the source of recharge, aquifer dynamics and inter-connectivity among aquifers. Within a depth span of 300 m, three aquifers, with contrasting recharge sources and dynamics, were delineated in this Sone-Ganga-Punpun interfluve region, with limited cross-aquifer hydraulic interconnections. The chemistry evolves from Ca-HCO₃ to Na-Ca-HCO₃ in the shallow semiconfined Aquifer-I with a mean transit time of 20-23 years. The dominant recharge to Aquifer-I is from the river inflows and rainwater percolation through paleochannels. The semi-confined to confined Aquifer-II holds fresh quality groundwater with mixed water facies (Mg/Ca-Na-HCO₃). The modeled age of Aquifer-II groundwater is found to be 205-520 years, which is supported by presence of negligible tritium and minor variations in stable isotopes. Outcrop regions of Aquifer-II sediments in the marginal alluvial areas and deep-seated paleochannels in the southwestern part are the potential zones for Aquifer-II recharge. A deep confined Aquifer-III with fresh quality of groundwater is identified below 220 m. This aquifer is characterized by old age (~3.5 to 4.7 ka BP) and enriched δ¹⁸O (-5.7‰). These results along with the existing paleoclimate records of this region infer that Aquifer-III is recharged during an arid climate. The marginal alluvial plains are the probable recharge zones for Aquifer-III. This study helped in conceptualizing the groundwater flow paths in multi-tiered aquifers of MGP. The knowledge and understanding would extend crucial inputs for the sustainable development of deep aquifers not only in the MGP but also in other regions of Indo-Gangetic Plains.

Occurrence and ecotoxicological risk assessment of perfluoroalkyl substances in water of lakes along the middle reach of Yangtze River, China

Polyfluoroalkyl substances (PFASs) are widely distributed in aquatic environment, and the potential ecological risk of PFASs has become a new challenge in recent years. But there were few integrated studies about the distribution, source appointment and risk assessment of PFASs in water of lakes along the middle reach of Yangtze River, China. Hence, this study investigated the pollution characteristics, source apportionment, ecological risks assessment of eleven PFASs from the surface water in this region. The total concentrations of PFASs (∑PFASs) ranged from 12.43 to 77.44 ng L^-1 in this region. The ∑PFASs in Hong and Poyang Lakes were higher than those in Dongting Lake and middle reach of Yangtze River (p < 0.05). The compositions of PFASs in the middle reach of Yangtze River and along three lakes were similar, being with a larger proportion of short-chain PFACs. The food packaging and metal plating sources were identified as the main sources by two models. The total risk quotients (∑RQs) showed the ecological risk for algae in the middle reach of Yangtze River, Dongting and Poyang Lakes were negligible, but the low risk in some sites of Hong Lake. The EDIs of ∑PFASs were much lower than the tolerable daily intake recommended by the European Food Safety Authority. The results of this study were significant for developing effective strategies (e.g. short-chain substitution and restriction) of controlling PFASs pollution in the middle reach of Yangtze River and along lakes.

Perfluoroalkyl substances (PFASs) in the Ugandan waters of Lake Victoria: Spatial distribution, catchment release and public exposure risk via municipal water consumption

Perfluoroalkyl substances (PFASs) have scarcely been studied in the Lake Victoria Basin and Africa in general. We investigated spatial profiles of PFASs in the Ugandan part of Lake Victoria, their influxes and human exposure via drinking water. We analyzed open lake water, riverine water (Rivers Kagera and Sio), urban drainage water (Nakivubo Channel), over-lake bulk atmospheric deposition and municipal tap water (Kampala, Jinja and Entebbe). The average concentrations (ng/L) for individual target PFASs were in the ranges of 0.08-23.8 (Nakivubo Channel), 0.01-10.8 (Murchison Bay), <MDL-5.38 (Kampala tap water), 0.01-3.64 (R. Kagera), <MDL-3.56 (Jinja tap water), <MDL-3.35 (R. Sio), <MDL-1.96 (Entebbe tap water), <MDL-1.46 (open lake) and <MDL-1.00 (atmospheric deposition). Estimated contribution of input pathways to ∑PFAS fluxes into Lake Victoria was in the order atmospheric deposition > R. Kagera, >R. Sio > Nakivubo Channel. Perfluorohexanoic acid (PFHxA) and perfluorooctane sulfonic acid (PFOS) had the highest influx and retention estimates, respectively. Perfluoroalkane sulfonates (PFSAs) were mostly associated with urban drainage samples. PFASs were likely recycled from the Nakivubo Channel, through the Murchison Bay, into municipal drinking water. The estimated human exposure to ∑₁₁PFASs via drinking water indicated low risk of adverse health effects.

Investigation of distribution, sources and flux of perfluorinated compounds in major southern Indian rivers and their risk assessment

Perfluorinated compounds (PFCs) are a group of emerging contaminants still less reported in rivers, particularly southern India. Therefore, we investigated the fate of 13 PFCs in three major rivers in southern India during post-monsoon and summer seasons. Twelve PFCs were detected, with an average total PFCs of 1853 ± 1463 pg/l. However, the total PFCs recorded in ppost-monsoon and summer seasons ranged from ND (none detected) to 10,545 pg/l and ND to 4960 pg/l, respectively. Among the individual congeners, perfluoro-n-hexanoic acid (PFHxA) had the highest detection average (929 ± 710 pg/l). The higher detection of short chain PFCs signifies their increasing wide usage as an alternative to perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS). Higher levels of PFCs were observed in summer than post-monsoon season in the river Kaveri, which is mainly attributed to the decrease in river flow. A multidimensional source identification revealed domestic and commercial wastewater as the major source. A correlation analysis showed that most of the detected PFCs share the common source and undergo co-migration into rivers. The flux of PFCs into the Bay of Bengal, loaded by the Kaveri (15 kg/yr) and the Tamiraparani (2.2 kg/yr) rivers, signifies lower per capita emissions than other rivers in India and other countries. Further, the PFC levels found in the rivers can be considered safe for human consumption and aquatic organisms based on international guidelines. Being the first hand report in southern Indian rivers, the results warrant further investigation to understand the exact sources, fate and removal in detail.

What's in the water? - Target and suspect screening of contaminants of emerging concern in raw water and drinking water from Europe and Asia

There is growing worry that drinking water can be affected by contaminants of emerging concern (CECs), potentially threatening human health. In this study, a wide range of CECs (n = 177), including pharmaceuticals, pesticides, perfluoroalkyl substances (PFASs) and other compounds, were analysed in raw water and in drinking water collected from drinking water treatment plants (DWTPs) in Europe and Asia (n = 13). The impact of human activities was reflected in large numbers of compounds detected (n = 115) and high variation in concentrations in the raw water (range 15-7995 ng L^-1 for ∑₁₇₇CECs). The variation was less pronounced in drinking water, with total concentration ranging from 35 to 919 ng L^-1. Treatment efficiency was on average 65 ± 28%, with wide variation between different DWTPs. The DWTP with the highest ∑CEC concentrations in raw water had the most efficient treatment procedure (average treatment efficiency 89%), whereas the DWTP with the lowest ∑₁₇₇CEC concentration in the raw water had the lowest average treatment efficiency (2.3%). Suspect screening was performed for 500 compounds ranked high as chemicals of concern for drinking water, using a prioritisation tool (SusTool). Overall, 208 features of interest were discovered and three were confirmed with reference standards. There was co-variation between removal efficiency in DWTPs for the target compounds and the suspected features detected using suspect screening, implying that removal of known contaminants can be used to predict overall removal of potential CECs for drinking water production. Our results can be of high value for DWTPs around the globe in their planning for future treatment strategies to meet the increasing concern about human exposure to unknown CECs present in their drinking water.

PFAS and their substitutes in groundwater: Occurrence, transformation and remediation

Poly- and perfluoroalkyl substances (PFAS) are increasingly investigated due to their global occurrence and potential human health risk. The ban on PFOA and PFOS has led to the use of novel substitutes such as GenX, F-53B and OBS. This paper reviews the studies on the occurrence, transformation and remediation of major PFAS i.e. PFOA, PFNA, PFBA, PFOS, PFHxS, PFBS and the three substitutes in groundwater. The data indicated that PFOA, PFBA, PFOS and PFBS were present at high concentrations up to 21,200 ng L^-1 while GenX and F-53B were found up to 30,000 ng L^-1 and 0.18-0.59 ng L^-1, respectively. PFAS in groundwater are from direct sources e.g. surface water and soil. PFAS remediation methods based on membrane, redox, sorption, electrochemical and photocatalysis are analyzed. Overall, photocatalysis is considered to be an ideal technology with low cost and high degradation efficacy for PFAS removal. Photocatalysis could be combined with electrochemical or membrane filtration to become more advantageous. GenX, F-53B and OBS in groundwater treatment by UV/sulfite system and electrochemical oxidation proved effective. The review identified gaps such as the immobilization and recycling of materials in groundwater treatment, and recommended visible light photocatalysis for future studies.

PFAS removal by ion exchange resins: A review

Per- and poly-fluoroalkyl substances (PFAS) represent a large family of anthropogenic organic compounds with a wide range of industrial and commercial applications. PFAS have become a global concern due to their toxicity and bio-accumulative properties. PFAS species have been ubiquitously detected in natural waters, wastewaters, sludge, and aquatic and terrestrial species which are anionic, zwitterionic and neutral. The ion exchange (IX) process for PFAS removal is an efficient technology for the remediation of PFAS-laden surface, ground and effluent wastewaters. This approach is more effective towards eliminating emerging short-chain PFAS which are not removed by carbon-based adsorption processes. This article presents a state-of-the-art review of PFAS removal from water via IX process. The evaluation and comparison of various IX resins in terms of kinetics and isotherms is presented. Literature data indicates that IX isotherm uptake capacity for perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) can range up to 5 mmol/g on commercially available IX resins such as IRA 958 and IRA 67. The mechanism involved in the PFAS uptake process, such as diffusion, electrostatic interactions and hydrophobic effects are discussed. The effects of the eluent variability on the regeneration efficacy are also highlighted and the effect of single-use vs reuse for newly developed PFAS-specific IX resins are also examined based on the reviewed literature.

Per- and polyfluoroalkyl substances (PFAS) as contaminants of emerging concern in Asia's freshwater resources

The occurrence of per- and polyfluoroalkyl substances (PFAS) in water resources is an emerging concern because of their environmental persistence and bioaccumulation in humans. In Western countries, health advisories regarding PFAS exposure have been released to warn the public of its potential adverse effects. However, awareness regarding PFAS exposure in Asia is still at its infancy as reflected by the minimal safeguards imposed to protect the population from exposure. Here, we reviewed studies on PFAS contamination in Asia with a focus on freshwater resources to determine whether PFAS is also a concern in this part of the globe. Peer reviewed articles which included information on PFAS levels from 2000 to 2020 were compiled. The highest PFAS contamination was detected in surface water relative to ground, tap, and drinking water. PFAS levels in water resources in several countries in Asia, such as China, Japan, and South Korea, were above the recommended level, similar to that in the United States. PFAS in South and Southeast Asia were just below the recommended level, but the rise of PFAS in China in the recent decade, alongside its remarkable economic and industrial growth, suggests that increased PFAS contamination in South and Southeast Asia may soon follow, as these countries compete with the global economy. Hence, there is a need for these countries to also implement measures that will reduce the exposure of their population to PFAS.

Occurrence and fate of legacy and novel per- and polyfluoroalkyl substances (PFASs) in freshwater after an industrial fire of unknown chemical stockpiles

An industrial warehouse illegally storing a large quantity of unknown chemical and industrial waste ignited in an urban area in Melbourne, Australia. The multiday fire required firefighters to use large amounts of fluorine-free foam that carried contaminated firewater runoff into an adjacent freshwater creek. In this study, the occurrence and fate of 42 per- and polyfluoroalkyl substances (PFASs) was determined from triplicate surface water samples (n = 45) from five locations (upstream, point-source, downstream; 8 km) over three sampling campaigns from 2018 to 2020. Out of the 42 target PFASs, perfluorocarboxylates (PFCAs: C4-C14), perfluoroalkane sulfonates (PFSAs: C4-C10), and perfluoroalkyl acid precursors (e.g. 6:2 fluorotelomer sulfonate (6:2 FTSA)) were ubiquitously detected in surface waters (concentration ranges: <0.7-3000 ng/L). A significant difference in ΣPFAS concentration was observed at the point-source (mean 5500 ng/L; 95% CI: 4800, 6300) relative to upstream sites (mean 100 ng/L; 95% CI: 90, 110; p ≤ 0.001). The point-source ΣPFAS concentration decreased from 5500 ± 1200 ng/L to 960 ± 42 ng/L (-83%) after two months and to 430 ± 15 ng/L (-98%) two years later. 6:2 FTSA and perfluorooctanesulfonate (PFOS) dominated in surface water, representing on average 31% and 20% of the ΣPFAS, respectively. Emerging PFASs including a cyclic perfluoroalkanesulfonate (PFECHS) and a C4 perfluoroalkane sulfonamide (FBSA) were repeatedly present in surface water (concentration ranges <0.3-77 ng/L). According to the updated Australian PFAS guidelines for ecological conservation, the water samples collected at the time of monitoring may have posed a short-term risk to aquatic organisms in regard to PFOS levels. These results illustrate that acute high dose exposure to PFASs can result from industrial fires at sites storing or stockpiling PFAS-based waste products. Continued monitoring will be crucial to evaluate potential long-term risk to wildlife in the region.

Per- and Polyfluoroalkyl Substance (PFAS) Transport from Groundwater to Streams near a PFAS Manufacturing Facility in North Carolina, USA

We quantified per- and polyfluoroalkyl substance (PFAS) transport from groundwater to five tributaries of the Cape Fear River near a PFAS manufacturing facility in North Carolina (USA). Hydrologic and PFAS data were coupled to quantify PFAS fluxes from groundwater to the tributaries. Up to 29 PFAS were analyzed, including perfluoroalkyl acids and recently identified fluoroethers. Total quantified PFAS (ΣPFAS) in groundwater was 20-4773 ng/L (mean = 1863 ng/L); the range for stream water was 426-3617 ng/L (mean = 1717 ng/L). Eight PFAS constituted 98% of ΣPFAS; perfluoro-2-(perfluoromethoxy)propanoic acid (PMPA) and hexafluoropropylene oxide dimer acid (GenX) accounted for 61%. For PFAS discharge from groundwater to one tributary, values estimated from stream water measurements (18 ± 4 kg/yr) were similar to those from groundwater measurements in streambeds (22-25 ± 5 kg/yr). At baseflow, 32 ± 7 kg/yr of PFAS discharged from groundwater to the five tributaries, eventually reaching the Cape Fear River. Given the PFAS emission timeline at the site, groundwater data suggest the abundant fluoroethers moved through the subsurface to streams in ≪50 yr. Discharge of contaminated groundwater may lead to long-term contamination of surface water and impacts on downstream drinking water supplies. This work addresses a gap in the PFAS literature: quantifying PFAS mass transfer between groundwater and surface water using field data.

Perfluoroalkyl substances in drinking water sources along the Yangtze River in Jiangsu Province, China: Human health and ecological risk assessment

Perfluoroalkyl substances (PFASs) in source water is of growing concern for its adverse effects on human health and wildlife as well. The Yangtze River is the vital drinking water source in Jiangsu Province of China, but little attention has been paid on PFASs. The occurrence, spatial distribution and temporal trend of PFASs in 21 water sources along the Jiangsu section of the Yangtze River was investigated with sampling from 2018 to 2020. Moreover, health risk of PFASs was assessed by estimated intake dose and derived tolerable intake dose, while ecological risk was assessed by selected effect concentration and environmental exposure. PFASs concentrations in source water ranged from 12.0 to 128 ng/L, with perfluorooctanoic acid (PFOA) as the dominated congener. Fluorine chemical industry lead to a great increase of perfluorohexanoic acid (PFHxA) in its nearest water source. The estimated daily intake of PFASs through drinking was 0.54 and 0.82 ng/kg bw/day for adults and children. The major health risk was from perfluorooctane sulfonate (PFOS) and PFOA for their toxicity on liver, reproduction, development and immunity, with the maximum hazard quotient of 0.029 and 0.043 for adults and children in the worst scenario. The ecological risks from PFASs on nine species groups ranged from 2.7 × 10-10 to 5.2. PFOA and Perfluorobutane sulfonate (PFBS) were causing significant risk on wildlife, particularly on worms, mussels, and fish, which may further influence the structure and processes in the foodweb. Overall, PFASs, especially PFOS, PFOA and PFBS, induced considerable risk on human health and aquatic species in some hotspot area. It would be necessary to include them into monitoring in China and develop standards for different protection purposes.

Determination of total oxidizable precursors in foam surfactants and foam contaminated water based on UV-activated persulfate oxidation

In this study, ultraviolet (UV)-activated persulfate under alkaline condition was developed as an alternative Total Oxidizable Precursor (TOP) assay to convert per- and polyfluoroalkyl substances (PFASs) precursors into detectable perfluoroalkyl acids (PFAAs). The conventional heat-based TOP assay takes 6 h at 85 °C, which is time consuming and may lose the volatile PFASs. Shorter time treatment would be beneficial to promote the analysis efficiency of the samples. We here report the UV-based TOP method as faster replacement of conventional heat-based TOP assay. The 6:2 fluorotelomer sulfonate (FTS), 8:2 FTS, and perfluorooctanesulfonamide (FOSA) achieved nearly complete conversion (with the molar yield of PFAAs of 97.2%-109.9%) at 60 min. This new UV-based TOP assay was then applied to 23 industry samples, and the results are comparable with the heat-based TOP assay. The perfluoroalkyl carboxylic acids (PFCAs) concentrations of 23 samples before and after normal TOP assay were 0-4290 mg L^-1 and 438-77,420 mg L^-1, respectively. The PFCAs after 60 min UV-based TOP assay was 310-81,881 mg L^-1. The Quotient_Mol of 21 samples were 0.71-1.28, the Quotient_Mol of other two samples were 1.45 and 1.68, this probably due to the loss of volatile precursors during heat-based TOP assay. The UV-based TOP assay is an efficient, reliable and faster alternative to the conventional heat-based TOP assay.

PFOS dominates PFAS composition in ambient fine particulate matter (PM2.5) collected across North Carolina nearly 20 years after the end of its US production

Contamination of drinking water by per- and polyfluoroalkyl substances (PFASs) emitted from manufacturing plants, fire-fighting foams, and urban waste streams has received considerable attention due to concerns over toxicity and environmental persistence; however, PFASs in ambient air remain poorly understood, especially in the United States (US). We measured PFAS concentrations in ambient fine particulate matter (PM_2.5) at 5 locations across North Carolina over a 1 year period in 2019. Thirty-four PFASs, including perfluoroalkyl carboxylic, perfluoroalkane sulfonic, perfluoroalkyl ether carboxylic and sulfonic acids were analyzed by UHPLC/ESI-MS/MS. Quarterly averaged concentrations ranged from <0.004-14.1 pg m^-3. Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) ranged from <0.18 to 14.1 pg m^-3, comparable to previous PM_2.5 measurements from Canada and Europe (<0.02-3.5 pg m^-3). Concentrations above 1 pg m^-3 were observed in July-September at Charlotte (14.1 pg m^-3, PFOA), Wilmington (4.75 pg m^-3, PFOS), and Research Triangle Park (1.37 pg m^-3, PFOS). Notably, PM_2.5 has a short atmospheric lifetime (<2 weeks), and thus, the presence of PFOS in these samples raises questions about their sources, since PFOS production was phased out in the US ∼20 years ago. This is the first US study to provide insights into ambient PFAS concentrations in PM_2.5.

Organic contaminants in Ganga basin: from the Green Revolution to the emerging concerns of modern India

The Ganga basin includes some of the most densely populated areas in the world, in a region characterized by extremely high demographic and economic growth rates. Although anthropogenic pressure in this area is increasing, the pollution status of the Ganga is still poorly studied and understood. In the light of this, we have carried out a systematic literature review of the sources, levels and spatiotemporal distribution of organic pollutants in surface water and sediment of the Ganga basin, including for the first time emerging contaminants (ECs). We have identified 61 publications over the past thirty years, with data on a total of 271 organic compounds, including pesticides, industrial chemicals, and by-products, artificial sweeteners, pharmaceuticals, and personal care products (PPCPs).

The most studied organic contaminants are pesticides, whereas knowledge of industrial compounds and PPCPs, among which some of the major ECs, is highly fragmentary. Most studies focus on the main channel of the Ganga, the Yamuna, the Gomti, and the deltaic region, while most of the Ganga's major tributaries, and the entire southern part of the catchment, have not been investigated. Hotspots of contamination coincide with major urban agglomerations, including Delhi, Kolkata, Kanpur, Varanasi, and Patna. Pesticides levels have decreased at most of the sites over recent decades, while potentially harmful concentrations of polychlorinated biphenyls (PCBs), organotin compounds (OTCs), and some PPCPs have been detected in the last ten years. Considering the limited geographical coverage of sampling and number of analyzed compounds, this review highlights the need for a more careful selection of locations, compounds and environmental matrices, prioritizing PPCPs and catchment-scale, source-to-sink studies.

Perfluoroalkyl substances in the urine and hair of preschool children, airborne particles in kindergartens, and drinking water in Hong Kong

Seven perfluorinated and polyfluorinated substances (PFASs), namely perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluorooctanoic acid (PFOA), perfluorooctane sulfonic acid (PFOS), perfluoroheptanoic acid (PFHpA), perfluorohexanoic acid (PFHxA), and perfluoro-1,10-decanedicarboxylic acid (PFDDA), were evaluated in urine and hair samples from children (age: 4-6 years, N = 53), airborne particles sampled at 17 kindergartens, and tap water and bottled water samples. All samples were collected in Hong Kong. The analytical results suggested widespread PFAS contamination. All target PFASs were detected in at least 32% of urine samples, with geometric mean (GM) concentrations ranging from 0.18 to 2.97 ng/L, and in 100% of drinking water samples at GM concentrations of 0.18-21.1 ng/L. Although PFOS and PFDDA were not detected in hair or air samples, the other target PFASs were detected in 48-70% of hair samples (GM concentrations: 2.40-233 pg/g) and 100% of air samples (GM concentrations: 14.8-536.7 pg/m³). In summary, the highest PFAS concentrations were detected in airborne particles measured in kindergartens. PFOA was the major PFAS detected in hair, urine, and drinking water samples, while PFOA, PFDA, and PFHpA were dominant in airborne particles. Although a significant difference in PFAS concentrations in hair samples was observed between boys and girls (p < .05), no significant sex-related difference in urinary PFAS or paired PFAS (hair/urine) concentrations was observed.

Characteristics, pollution patterns and risks of Perfluoroalkyl substances in drinking water sources of Taiwan

Perfluoroalkyl substances (PFASs) are found globally in the environment, but for Taiwan there is a lack of studies on PFAS occurrence, source apportionment, and health risks in drinking water sources. We collected surface water samples from the Baoshan Reservoir of Taiwan and used Positive Matrix Factorization to attribute PFAS contaminants to possible sources. The health index (HI) was used to evaluate the health risk, which was then compared to various international advisory level guidelines. PFOA and PFOS were found to be the most predominant compounds, with concentrations averaging 20.2 ng/L and 16.7 ng/L, respectively. The joint contribution of domestic and commercial waste totaled 61.2% as the predominant source of pollution, followed by urban activities as a secondary source contributing 38.8%. Using the USEPA reference dose, a health risk analysis of Baoshan Reservoir drinking water did not reflect a formal high health risk (HI < 1.0), however potential risks to human health may be present since the sum of PFOA and PFOS (130 ng/L) exceeded the USEPA Lifetime Health Advisory level (70 ng/L). This investigation provides information and reference points for further reviews of PFAS presence in public water supplies.

Emerging organic contaminants in groundwater under a rapidly developing city (Patna) in northern India dominated by high concentrations of lifestyle chemicals

Aquatic pollution from emerging organic contaminants (EOCs) is of key environmental importance in India and globally, particularly due to concerns of antimicrobial resistance, ecotoxicity and drinking water supply vulnerability. Here, using a broad screening approach, we characterize the composition and distribution of EOCs in groundwater in the Gangetic Plain around Patna (Bihar), as an exemplar of a rapidly developing urban area in northern India. A total of 73 EOCs were detected in 51 samples, typically at ng.L^-1 to low μg.L^-1 concentrations, relating to medical and veterinary, agrochemical, industrial and lifestyle usage. Concentrations were often dominated by the lifestyle chemical and artificial sweetener sucralose. Seventeen identified EOCs are flagged as priority compounds by the European Commission, World Health Organisation and/or World Organisation for Animal Health: namely, herbicides diuron and atrazine; insecticides imidacloprid, thiamethoxam, clothianidin and acetamiprid; the surfactant perfluorooctane sulfonate (and related perfluorobutane sulfonate, perfluorohexane sulfonate, perfluorooctanoic acid and perfluoropentane sulfonate); and medical/veterinary compounds sulfamethoxazole, sulfanilamide, dapson, sulfathiazole, sulfamethazine and diclofenac. The spatial distribution of EOCs varies widely, with concentrations declining with depth, consistent with a strong dominant vertical flow control. Groundwater EOC concentrations in Patna were found to peak within ∼10 km distance from the River Ganges, indicating mainly urban inputs with some local pollution hotspots. A heterogeneous relationship between EOCs and population density likely reflects confounding factors including varying input types and controls (e.g. spatial, temporal), wastewater treatment infrastructure and groundwater abstraction. Strong seasonal agreement in EOC concentrations was observed. Co-existence of limited transformation products with associated parent compounds indicate active microbial degradation processes. This study characterizes key controls on the distribution of groundwater EOCs across the urban to rural transition near Patna, as a rapidly developing Indian city, and contributes to the wider understanding of the vulnerability of shallow groundwater to surface-derived contamination in similar environments.

Occurrence, statutory guideline values and removal of contaminants of emerging concern by Electrochemical Advanced Oxidation Processes: A review

A wide variety of chemical compounds are used in human activities; however, part of these compounds reach surface water, groundwater and even water considered for potable uses. Due to the limited efficiency of water treatment by the Water and Wastewater Treatment Plants, the presence of these compounds in natural and human consumption waters can be very harmful due to their high persistence and adverse effects; these characteristics define the contaminants of emerging concern (CECs). Water treatment by Electrochemical Advanced Oxidation Processes (EAOPs) has been evaluated as a promising process for the removal of persistent and recalcitrant organic contaminants. With this background, the present review aims to gather studies and information published between 2015 and 2020 regarding the occurrence of CECs in surface, potable and groundwater, its treatment by EAOPs, the main operating conditions and by-product generation of EAOPs, contaminant toxicity assessments and international statutory guideline values concerning CEC standards and allowable concentrations in the environment and treated drinking water. Therefore, in this review it was found that the compounds bisphenol A (BPA), diethyltoluamide (DEET), 17α-ethinyl estradiol (EE2), perfluorobutanoic acid (PFBA), carbamazepine, caffeine and atrazine were the most frequently detected in water sources, with concentrations ranging from 35.54-4800, 1.21-98, 0.005-38.5, 5-742.904, 0.0071-586, 0.89-1040, and 100-323 (ng L-1), respectively. Among the operational conditions of EAOPs, current density, pH and oxidant concentration are the main operational parameters that have an influence on these treatment technologies, besides the by-products generated, which might be removed by the integration of EAOPs with biological digestion treatments. Regarding the values of water quality standards, many CECs do not have established standard allowable concentration values, which represents a concern toward the possible toxic effects of these compounds on non-target organisms.

Determination of organically bound fluorine sum parameters in river water samples-comparison of combustion ion chromatography (CIC) and high resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS)

In this study, we compare combustion ion chromatography (CIC) and high resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) with respect to their applicability for determining organically bound fluorine sum parameters. Extractable (EOF) and adsorbable (AOF) organically bound fluorine as well as total fluorine (TF) were measured in samples from river Spree in Berlin, Germany, to reveal the advantages and disadvantages of the two techniques used as well as the two established fluorine sum parameters AOF and EOF. TF concentrations determined via HR-CS-GFMAS and CIC were comparable between 148 and 270 μg/L. On average, AOF concentrations were higher than EOF concentrations, with AOF making up 0.14–0.81% of TF (determined using CIC) and EOF 0.04–0.28% of TF (determined using HR-CS-GFMAS). The results obtained by the two independent methods were in good agreement. It turned out that HR-CS-GFMAS is a more sensitive and precise method for fluorine analysis compared to CIC. EOF and AOF are comparable tools in risk evaluation for the emerging pollutants per- and polyfluorinated alkyl substances; however, EOF is much faster to conduct.

Per- and polyfluoroalkyl substances in the German environment - Levels and patterns in different matrices

Per- and polyfluoroalkyl substances (PFAS) in the environment mostly originate from emissions of previously unregulated PFAS. However, there are also many documented incidents of accidental releases. To track such releases, it is essential to distinguish between typical background contamination and legally relevant incidents. This requires a comprehensive overview of all PFAS present in the environment, which is currently only possible to a limited extent due to the large variety of individual compounds. In the present study, a multimethod for capturing 41 PFAS including perfluoroalkyl acid (PFAA) precursors is introduced. The applicability of the method was tested on terrestrial, freshwater and marine samples from the German Environmental Specimen Bank (ESB), thereby providing a rough overview of PFAS contamination in German environment. Special focus was put on soil samples from ESB sites across Germany in comparison to soil samples from a polluted site in south-west Germany. The method was successfully applied to environmental samples. In total, 31 PFAS were detected, among them PFAA precursors and fluorinated ethers. Substance patterns differed between sites and matrices. In ESB soil samples from 2014 (n = 11), the sum of all captured PFAS ranged between 0.75 and 19.5 μg kg^-1 dry weight (dw), while concentrations between 416 μg kg^-1 and 3530 μg kg^-1 were detected in samples from the incident site (n = 10). In other matrices, total PFAS concentrations were magnitudes lower. Highest concentrations were observed for PFOS in bream livers from the Saale (226 μg kg^-1). Given the heterogeneous patterns, it will require further broadly-based monitoring data to allow for a solid estimation of relevant background levels. The data provided here may support the differentiation between background levels and hotspot contaminations.

Rapid detection of perfluorinated sulfonic acids through preconcentration by bubble bursting and surface-assisted laser desorption/ionization

We developed a preconcentration method in which aerosol droplets containing enriched perfluorinated sulfonic acids (PFSs) are generated through bubble bursting and collected. The droplets were subjected to PFS analysis of perfluorohexane sulfonic acid (PFHxS) and perfluorooctanesulfonic acid (PFOS) through surface-assisted laser desorption/ionization-time-of-flight mass spectrometry; silver nanoplates (AgNPts) were assisting materials. The method was highly efficient, with an approximately three-order magnitude enhancement (5 × 10-13 to 1 × 10-11 M). Ultralow PFS concentrations (0.5 ng/L of PFOS; 0.4 ng/L of PFHxS) were detected in preconcentrated tap water containing PFSs. Our method has potential for rapid real-world PFS detection in water.

A Modified HYDRUS Model for Simulating PFAS Transport in the Vadose Zone

The HYDRUS unsaturated flow and transport model was modified to simulate the effects of non-linear air-water interfacial (AWI) adsorption, solution surface tension-induced flow, and variable solution viscosity on the unsaturated transport of per- and polyfluoroalkyl substances (PFAS) within the vadose zone. These modifications were made and completed between March 2019 and May 2019, and were implemented into both the one-dimensional (1D) and two-dimensional (2D) versions of HYDRUS. Herein, the model modifications are described and validated against the available literature-derived PFAS transport data (i.e., 1D experimental column transport data). The results of both 1D and 2D example simulations are presented to highlight the function and utility of the model to capture the dynamic and transient nature of the temporally and spatially variable interfacial area of the AWI (Aaw) as it changes with soil moisture content (Θw) and how it affects PFAS unsaturated transport. Specifically, the simulated examples show that while AWI adsorption of PFAS can be a significant source of retention within the vadose zone, it is not always the dominant source of retention. The contribution of solid-phase sorption can be considerable in many PFAS-contaminated vadose zones. How the selection of an appropriate Aaw(Θw) function can impact PFAS transport and how both mechanisms contribute to PFAS mass flux to an underlying groundwater source is also demonstrated. Finally, the effects of soil textural heterogeneities on PFAS unsaturated transport are demonstrated in the results of both 1D and 2D example simulations.

Prevalence of per- and polyfluoroalkyl substances (PFASs) in drinking and source water from two Asian countries

The present study focuses on the determination of the occurrence and levels of per- and polyfluoroalkyl substances (PFASs) in the drinking and source water from the Philippines and Thailand. A total of 46 samples (18 commercial bottled waters, 5 drinking water from vending machine (re-fill stations) and 23 source water) were analyzed using liquid chromatography with tandem high-resolution mass spectrometry. Using the targeted method, 12 different PFASs were detected in the drinking water samples with total quantifiable PFASs (∑PFASs) levels ranging from 7.16 to 59.49 ng/L; 15 PFASs were detected in source water with ∑PFASs ranging from 15.55 to 65.65 ng/L. A 100% detection frequency was observed for perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), and perfluorosulfonic acid (PFOS) in all water samples. Six other PFASs, not included in the targeted analysis, were detected using the suspect screening approach. For the first time, the presence of 2-(N-methylperfluorooctanesulfonamido) acetic acid (N-MeFOSAA) in drinking water is reported, and 3 novel PFASs (C₅H₅OF_8, C₆H₄O₂F₆, and C₉H₂O₂F₁₆) were detected using suspect screening in source water. Combined results from target and suspect screening analysis showed that PFASs detected were predominantly (52%) short-chain (with fluorinated alkyl chain of ≤6) which could be explained by their high mobility in the environment. The detected PFASs levels in drinking water will not likely pose immediate health risk to consumers according to US EPA health advisory for PFOS and PFOA of 70 ng/L, but inclusion of bottled and drinking water from re-fill stations in monitoring programs is warranted.