Unveiling Local Current Behavior and Manipulating Grain Homogenization of Perovskite Films for Efficient Solar Cells

Achieving high power conversion efficiency in perovskite solar cells (PSCs) heavily relies on fabricating homogeneous perovskite films. However, understanding microscopic-scale properties such as current generation and open-circuit voltage within perovskite crystals has been challenging due to difficulties in quantifying intragrain behavior. In this study, the local current intensity within state-of-the-art perovskite films mapped by conductive atomic force microscopy reveals a distinct heterogeneity, which exhibits a strong anticorrelation to the external biases. Particularly under different external bias polarities, specific regions in the current mapping show contrasting conductivity. Moreover, grains oriented differently exhibit varied surface potentials and currents, leading us to associate this local current heterogeneity with the grain orientation. It was found that the films treated with isopropanol exhibit ordered grain orientation, demonstrating minimized lattice heterogeneity, fewer microstructure defects, and reduced electronic disorder. Importantly, devices exhibiting an ordered orientation showcase elevated macroscopic optoelectronic properties and boosted device performance. These observations underscore the critical importance of fine-tuning the grain homogenization of perovskite films, offering a promising avenue for further enhancing the efficiency of PSCs.

Wide-Range and Multistate Work Functions of Organometallic Halide Perovskite Films Regulated by Ferroelectric Substrates

Work function of organometallic halide perovskite (OHP) films is one of the most crucial photoelectric properties, which dominates the carrier dynamics in OHP-based devices. Despite surface treatments by additives being widely used to promote crystallization and passivate defects in OHP films, these chemical strategies for modulation of work functions face two trade-offs: homogeneity on the surface versus along the thickness; the range versus the accuracy of modulation. Herein, by using ferroelectric substrates of uniform polarization and subnanometer roughness, homogeneous CH3NH3PbI3 films are fabricated with five states of work functions with large spanning (∼0.8 eV) and high precision (sd ∼ 0.01 eV). We reveal that the ferroelectric polarizations and the smooth surfaces regulate CH3NH3+ orientations and suppress distortions of PbI6 octahedrons. The wide-range and multistate work functions originate from the ordered CH3NH3+ orientations and PbI6 octahedrons, which result in intensity enhancements and wavelength shifts in photoluminescence with a 30-fold increase of photoexcited carrier lifetime.

Positive and Negative Effects under Light Illumination in Halide Perovskites

Metal halide perovskites (MHPs) have excellent characteristics and present great potential in a broad range of applications such as solar cells, light-emitting diodes, and photodetectors. However, the light stability of devices remains an unresolved issue and has received great research attention. Under light illumination, MHPs exhibit various anomalous phenomena, such as photoluminescence (PL) enhancement, defect curing, PL blinking, and phase segregation. These phenomena are commonly considered intimately correlated with the performance and stability of MHP devices. In recent years, significant efforts have been made experimentally and theoretically toward understanding the physical origins of these anomalous effects. However, most research focuses on negative effects while the positive effects are mostly ignored. Herein, the positive effects and the negative effects of light soaking in MHPs are systematically discussed with a classification of the correlated physical mechanisms by specifically focusing on variation occurring in timescale from second to hour, corresponding to the unique ionic-electronic interaction. This intends to provide a new insight into ion effects on excellent properties of perovskites, and deep physical understanding of charge-carrier and ion dynamics in perovskite, and theoretical guidelines for the fabrication of high-quality and stability perovskite-based photovoltaic and photoelectric devices.

Recent Advances in Interface Engineering for Enhanced Open-Circuit Voltage Regulation in Perovskite Solar Cells

In recent years, perovskite solar cells (PSCs) have attracted significant attention due to their excellent photoelectric properties. However, several key performance parameters of these devices still fall short of their theoretical limits. Among these parameters, the regulation of open-circuit voltage (VOC) has been a focal point of intensive research efforts, playing a pivotal role in advancing the efficiency of PSCs. This review first provides an overview of the generation and loss mechanism of VOC. It then discusses the significance of interface engineering in VOC regulation. Recent developments in high-efficiency PSCs realized via interface engineering have been summarized and categorized into three key areas: surface modification, interface structure optimization, and surface dimensional engineering. Finally, a comprehensive summary of past research in this domain and offered insights into the future prospects of enhancing VOC in PSCs is provided.

Cl alloying improves thermal stability and increases luminescence in iodine-rich inorganic perovskites

The inorganic perovskite CsPbI3 shows promising photophysical properties for a range of potential optoelectronic applications but is metastable at room temperature. To address this, Br can be alloyed into the X-site to create compositions such as CsPbI2Br that are stable at room temperature but have bandgaps >1.9 eV - severely limiting solar applications. Herein, in an effort to achieve phase stable films with bandgaps <1.85 eV, we investigate alloying chlorine into iodine-rich triple-halide CsPb(I0.8Br0.2-x Cl x )3 with 0 < x < 0.1. We show that partial substitution of iodine with bromine and chlorine provides a path to maintain broadband terrestrial absorption while improving upon the perovskite phase stability due to chlorine's smaller size and larger ionization potential than bromine. At moderate Cl loading up to ≈5%, X-ray diffraction reveals an increasingly smaller orthorhombic unit cell, suggesting chlorine incorporation into the lattice. Most notably, this Cl incorporation is accompanied by a significant enhancement over Cl-free controls in the duration of black-phase stability of up to 7× at elevated temperatures. Additionally, we observe up to 5× increased steady state photoluminescence intensity (PL), along with a small blue-shift. In contrast, at high loading (≈10%), Cl accumulates in a second phase that is visible at grain boundaries via synchrotron fluorescence microscopy and negatively impacts the perovskite phase stability. Thus, replacing small fractions of bromine for chlorine in the iodine-rich inorganic perovskite lattice results in distinct improvement thermal stability and optoelectronic quality while minimally impacting the bandgap.

Charge Transfer Kinetics in Halide Perovskites: On the Constraints of Time-Resolved Spectroscopy Measurements

Understanding photophysical processes in lead halide perovskites is an important aspect of optimizing the performance of optoelectronic devices. The determination of exact charge carrier extraction rate constants remains elusive, as there is a large and persistent discrepancy in the reported absolute values. In this review, we concentrate on experimental procedures adopted in the literature to obtain kinetic estimates of charge transfer processes and limitations imposed by the spectroscopy technique employed. Time-resolved techniques (e.g., transient absorption-reflection and time-resolved photoluminescence spectroscopy) are commonly employed to probe charge transfer at perovskite/transport layer interfaces. The variation in sample preparation and measurement conditions can produce a wide dispersion of the measured kinetic parameters. The selected time window and the kinetic fitting model employed introduce additional uncertainty. We discuss here evaluation strategies that rely on multiexponential fitting protocols (regular or stretched) and show how the dispersion in the reported values for carrier transfer rate constants can be resolved.

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable α-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality and enhance the stability have remained elusive. In this study, we advance that understanding by investigating the effect of cationic alloying in CsxFA1-xPbI3 perovskite thin-films and solar-cell devices. Selected-area electron diffraction patterns combined with microwave conductivity measurements reveal that fine Cs+ tuning (Cs0.15FA0.85PbI3) leads to a minimization of stacking faults and an increase in the photoconductivity of the perovskite films. Ultra-sensitive external quantum efficiency, kelvin-probe force microscopy and photoluminescence quantum yield measurements demonstrate similar Urbach energy values, comparable surface potential fluctuations and marginal impact on radiative emission yields, respectively, irrespective of Cs content. Despite this, these nanoscopic defects appear to have a detrimental impact on inter-grains'/domains' carrier transport, as evidenced by conductive-atomic force microscopy and corroborated by drastically reduced solar cell performance. Importantly, encapsulated Cs0.15FA0.85PbI3 devices show robust operational stability retaining 85% of the initial steady-state power conversion efficiency for 1400 hours under continuous 1 sun illumination at 35 °C, in open-circuit conditions. Our findings provide nuance to the famous defect tolerance of halide perovskites while providing solid evidence about the detrimental impact of these subtle structural imperfections on the long-term operational stability.

Regulating Surface-Passivator Binding Priority for Efficient Perovskite Light-Emitting Diodes

Suppressing trap-assisted nonradiative losses through passivators is a prerequisite for efficient perovskite light-emitting diodes (PeLEDs). However, the complex bonding between passivators and perovskites severely suppresses the passivation process, which still lacks comprehensive understanding. Herein, the number, category, and degree of bonds between different functional groups and the perovskite are quantitatively assessed to study the passivation dynamics. Functional groups with high electrostatic potential and large steric hindrance prioritize strong bonding with organic cations and halides on the perfect surface, leading to suppressed coordination with bulky defects. By modulating the binding priorities and coordination capacity, hindrance from the intense interaction with perfect perovskite is significantly reduced, leading to a more direct passivation process. Consequently, the near-infrared PeLED without external light out-coupling demonstrates a record external quantum efficiency of 24.3% at a current density of 42 mA cm-2. In addition, the device exhibits a record-level-cycle ON/OFF switching of 20 000 and ultralong half-lifetime of 1126.3 h under 5 mA cm-2. An in-depth understanding of the passivators can offer new insights into the development of high-performance PeLEDs.

Chiral-structured heterointerfaces enable durable perovskite solar cells

Mechanical failure and chemical degradation of device heterointerfaces can strongly influence the long-term stability of perovskite solar cells (PSCs) under thermal cycling and damp heat conditions. We report chirality-mediated interfaces based on R-/S-methylbenzyl-ammonium between the perovskite absorber and electron-transport layer to create an elastic yet strong heterointerface with increased mechanical reliability. This interface harnesses enantiomer-controlled entropy to enhance tolerance to thermal cycling-induced fatigue and material degradation, and a heterochiral arrangement of organic cations leads to closer packing of benzene rings, which enhances chemical stability and charge transfer. The encapsulated PSCs showed retentions of 92% of power-conversion efficiency under a thermal cycling test (-40°C to 85°C; 200 cycles over 1200 hours) and 92% under a damp heat test (85% relative humidity; 85°C; 600 hours).

The balancing act between high electronic and low ionic transport influenced by perovskite grain boundaries

A better understanding of the materials' fundamental physical processes is necessary to push hybrid perovskite photovoltaic devices towards their theoretical limits. The role of the perovskite grain boundaries is essential to optimise the system thoroughly. The influence of the perovskite grain size and crystal orientation on physical properties and their resulting photovoltaic performance is examined. We develop a novel, straightforward synthesis approach that yields crystals of a similar size but allows the tuning of their orientation to either the (200) or (002) facet alignment parallel to the substrate by manipulating dimethyl sulfoxide (DMSO) and tetrahydrothiophene-1-oxide (THTO) ratios. This decouples crystal orientation from grain size, allowing the study of charge carrier mobility, found to be improved with larger grain sizes, highlighting the importance of minimising crystal disorder to achieve efficient devices. However, devices incorporating crystals with the (200) facet exhibit an s-shape in the current density-voltage curve when standard scan rates are used, which typically signals an energetic interfacial barrier. Using the drift-diffusion simulations, we attribute this to slower-moving ions (mobility of 0.37 × 10-10 cm2 V-1 s-1) in combination with a lower density of mobile ions. This counterintuitive result highlights that reducing ion migration does not necessarily minimise hysteresis.

Vertically Oriented Perovskites with Minimized Intrinsic Boundaries for Efficient Photovoltaics

Intrinsic boundaries formed by grain stacks of randomly oriented perovskite crystallites seriously restrict charge transport in the resultant photovoltaic devices, whereas direct passivation of these defects remains unexplored, and it is desirable to modulate perovskite growth with uniform orientation. Herein, we report a simple but effective method to regulate perovskite crystallization by employing a volatile and polymerizable monomer of hydroxyethyl methacrylate (HEMA), which can simultaneously interact with both FA+ and Pb2+ via hydrogen and coordination bonding, respectively, to seed perovskite crystallization with accelerated nucleation and retarded crystal growth. Upon thermal annealing, the gradual volatilization and partial self-condensation of the HEMA drive the perovskite growth perpendicularly to the substrate, leading to largely suppressed defect states, improved crystallinity, and a reduced Young's modulus of the perovskite film. As a result, champion efficiencies exceeding 24 and 22% with improved operational and mechanical stability of the optimized perovskite solar cells based on rigid and flexible substrates were finally achieved.

High-Quality Solution-Processed Quasi-2D Perovskite for Low-Threshold Lasers

Spin-coated quasi-two-dimensional halide perovskite films, which exhibit superior optoelectronic properties and environmental stability, have recently been extensively studied for lasers. Crystallinity is of great importance for the laser performance. Although some parameters related to the spin-coating process have been studied, the in-depth understanding and effective control of the acceleration rate on two-dimensional perovskite crystallization during spin-coating are still unknown. Here we investigate the effect of solvent evaporation on the microstructure of the final perovskite films during the spin-coating process. The crystallization quality of the film can be significantly improved by controlling solvent evaporation. As a result, the prepared quasi-2D perovskite film exhibits a stimulated emission threshold (pump: 343 nm, 6 kHz, 290 fs) of 550 nm as low as 16.2 μJ/cm2. Transient absorption characterization shows that the radiative biexciton recombination time is reduced from 738.5 to 438.3 ps, benefiting from the improved crystallinity. The faster biexciton recombination significantly enhanced the photoluminescence efficiency, which is critical for population inversion. This work could contribute to the development of low-threshold lasers.

Vacuum-Processed Propylene Urea Additive: A Novel Approach for Controlling the Growth of CH3NH3PbI3 Crystals in All Vacuum-Processed Perovskite Solar Cells

In this study, we present a novel method for controlling the growth of perovskite crystals in the vacuum thermal evaporation process by utilizing a vacuum-processable additive, propylene urea (PU). By coevaporation of perovskite precursors with PU to form the perovskite layer, PU, acting as a Lewis base additive, retards the direct reaction between the perovskite precursors. This facilitates a larger domain size and reduced defect density. Following the removal of the residual additive, the perovskite layer, exhibiting improved crystallinity, demonstrates reduced charge recombination, as confirmed by a time-resolved microwave conductivity analysis. Consequently, there is a notable enhancement in open-circuit voltage and power conversion efficiency, increasing from 1.05 to 1.15 V and from 17.17 to 18.31%, respectively. The incorporation of a vacuum-processable and removable Lewis base additive into the fabrication of vacuum-processed perovskite solar cells offers new avenues for optimizing these devices.

Recent Progress in Dopant-Free and Green Solvent-Processable Organic Hole Transport Materials for Efficient and Stable Perovskite Solar Cells

Dopant-free hole transport layers (HTLs) are crucial in enhancing perovskite solar cells (pero-SCs). Nevertheless, conventional processing of these HTL materials involves using toxic solvents, which gives rise to substantial environmental concerns and renders them unsuitable for large-scale industrial production. Consequently, there is a pressing need to develop dopant-free HTL materials processed using green solvents to facilitate the production of high-performance pero-SCs. Recently, several strategies have been developed to simultaneously improve the solubility of these materials and regulate molecular stacking for high hole mobility. In this review, a comprehensive overview of the methodologies utilized in developing dopant-free HTL materials processed from green solvents is provided. First, the study provides a brief overview of fundamental information about green solvents and Hansen solubility parameters, which can serve as a guideline for the molecular design of optimal HTL materials. Second, the intrinsic relationships between molecular structure, solubility in green solvents, molecular stacking, and device performance are discussed. Finally, conclusions and perspectives are presented along with the rational design of highly efficient, stable, and green solvent-processable dopant-free HTL materials.

Understanding Defects in Perovskite Solar Cells through Computation: Current Knowledge and Future Challenge

Lead halide perovskites with superior optoelectrical properties are emerging as a class of excellent materials for applications in solar cells and light-emitting devices. However, perovskite films often exhibit abundant intrinsic defects, which can limit the efficiency of perovskite-based optoelectronic devices by acting as carrier recombination centers. Thus, an understanding of defect chemistry in lead halide perovskites assumes a prominent role in further advancing the exploitation of perovskites, which, to a large extent, is performed by relying on first-principles calculations. However, the complex defect structure, strong anharmonicity, and soft lattice of lead halide perovskites pose challenges to defect studies. In this perspective, on the basis of briefly reviewing the current knowledge concerning computational studies on defects, this work concentrates on addressing the unsolved problems and proposing possible research directions in future. This perspective particularly emphasizes the indispensability of developing advanced approaches for deeply understanding the nature of defects and conducting data-driven defect research for designing reasonable strategies to further improve the performance of perovskite applications. Finally, this work highlights that theoretical studies should pay more attention to establishing close and clear links with experimental investigations to provide useful insights to the scientific and industrial communities.

Microencapsulated Perovskite Crystals via In Situ Permeation Growth from Polymer Microencapsulation-Expansion-Contraction Strategy: Advancing a Record Long-Term Stability beyond 10 000 h for Perovskite Solar Cells

Organic metal halide perovskite solar cells (PSCs) bearing both high efficiency and durability are predominantly challenged by inadequate crystallinity of perovskite. Herein, a polymer microencapsulation-expansion-contraction strategy is proposed for the first time to optimize the crystallization behavior of perovskite, typically by adeptly harnessing the swelling and deswelling characteristics of poly(4-acryloylmorpholine) (poly(4-AcM)) network on PbI2 surface. It can effectively retard the crystallization rate of perovskite, permitting meliorative crystallinity featured by increased grain size from 0.74 to 1.32 µm and reduced trap density from 1.12 × 1016 to 2.56 × 1015 cm-3. Moreover, profiting from the protection of poly(4-AcM) microencapsulation layer, the degradation of the perovskite is markedly suppressed. Resultant PSCs gain a robust power conversion efficiency (PCE) of 24.04%. Typically, they maintain 91% of their initial PCE for 13 008 h in a desiccated ambient environment and retain 92% PCE after storage for 4000 h with a relative humidity of 50 ± 10%, which is the state-of-the-art long-term stability among the reported contributions.

Halide Perovskites Breathe Too: The Iodide-Iodine Equilibrium and Self-Doping in Cs2SnI6

The response of an oxide crystal to the atmosphere can be personified as breathing-a dynamic equilibrium between O2 gas and O2- anions in the solid. We characterize the analogous defect reaction in an iodide double-perovskite semiconductor, Cs2SnI6. Here, I2 gas is released from the crystal at room temperature, forming iodine vacancies. The iodine vacancy defect is a shallow electron donor and is therefore ionized at room temperature; thus, the loss of I2 is accompanied by spontaneous n-type self-doping. Conversely, at high I2 pressures, I2 gas is resorbed by the perovskite, consuming excess electrons as I2 is converted to 2I-. Halide mobility and irreversible halide loss or exchange reactions have been studied extensively in halide perovskites. However, the reversible exchange equilibrium between iodide and iodine [2I-(s) ↔ I2(g) + 2e-] described here has often been overlooked in prior studies, though it is likely general to halide perovskites and operative near room temperature, even in the dark. An analysis of the 2I-(s)/I2(g) equilibrium thermodynamics and related transport kinetics in single crystals of Cs2SnI6 therefore provides insight toward achieving stable composition and electronic properties in the large family of iodide perovskite semiconductors.

Bifunctional interfacial engineering enabled efficient and stable carbon-based CsPbIBr2 perovskite solar cells

Carbon-based inorganic CsPbIBr2 perovskite solar cells (C-IPSC) have attracted widespread attention due to their low cost and excellent thermal stability. Unfortunately, due to the soft ion crystal nature of perovskite, inherent bulk defects and energy level mismatch at the CsPbIBr2/carbon interface limit the performance of the device. In this study, we introduced aromatic benzyltrimethylammonium chloride (BTACl) as a passivation layer to passivate the surface and grain boundaries of the CsPbIBr2 film. Due to the reduction of perovskite defects and better energy level arrangement, carrier recombination is effectively suppressed and hole extraction is improved. The champion device achieves a maximum power conversion efficiency (PCE) of 11.30% with reduces hysteresis and open circuit voltage loss. In addition, unencapsulated equipment exhibits excellent stability in ambient air.

Strain-insensitive viscoelastic perovskite film for intrinsically stretchable neuromorphic vision-adaptive transistors

Stretchable neuromorphic optoelectronics present tantalizing opportunities for intelligent vision applications that necessitate high spatial resolution and multimodal interaction. Existing neuromorphic devices are either stretchable but not reconcilable with multifunctionality, or discrete but with low-end neurological function and limited flexibility. Herein, we propose a defect-tunable viscoelastic perovskite film that is assembled into strain-insensitive quasi-continuous microsphere morphologies for intrinsically stretchable neuromorphic vision-adaptive transistors. The resulting device achieves trichromatic photoadaptation and a rapid adaptive speed (<150 s) beyond human eyes (3 ~ 30 min) even under 100% mechanical strain. When acted as an artificial synapse, the device can operate at an ultra-low energy consumption (15 aJ) (far below the human brain of 1 ~ 10 fJ) with a high paired-pulse facilitation index of 270% (one of the best figures of merit in stretchable synaptic phototransistors). Furthermore, adaptive optical imaging is achieved by the strain-insensitive perovskite films, accelerating the implementation of next-generation neuromorphic vision systems.

Precursor Engineering Induced High-Efficiency Electroluminescence of Quasi-Two-Dimensional Perovskites: A Synergistic Defect Inhibition and Passivation Approach

Despite light-emitting diodes (LEDs) based on quasi-two-dimensional (Q-2D) perovskites being inexpensive and exhibiting high performance, defects still limit the improvement of electroluminescence efficiency and stability by causing nonradiative recombination. Here, an organic molecule, 1-(o-tolyl) biguanide, is used to simultaneously inhibit and passivate defects of Q-2D perovskites via in situ synchronous crystallization. This molecule not only prevents surface bromine vacancies from forming through hydrogen bonding with the bromine of intermediaries but also passivates surface defects through its interaction with uncoordinated Pb. Via combination of defect inhibition and passivation, the trap density of Q-2D perovskite films can be significantly reduced, and the emission efficiency of the film can be improved. Consequently, the corresponding LED shows an external quantum efficiency of 24.3%, and its operational stability has been increased nearly 15 times.

Constructing tin oxides Interfacial Layer with Gradient Compositions for Efficient Perovskite/Silicon Tandem Solar Cells with Efficiency Exceeding 28

Atomic layer deposition (ALD) growth of conformal thin SnOx films on perovskite absorbers offers a promising method to improve carrier-selective contacts, enable sputter processing, and prevent humidity ingress toward high-performance tandem perovskite solar cells. However, the interaction between perovskite materials and reactive ALD precursor limits the process parameters of ALD-SnOx film and requires an additional fullerene layer. Here, it demonstrates that reducing the water dose to deposit SnOx can reduce the degradation effect upon the perovskite underlayer while increasing the water dose to promote the oxidization can improve the electrical properties. Accordingly, a SnOx buffer layer with a gradient composition structure is designed, in which the compositionally varying are achieved by gradually increasing the oxygen source during the vapor deposition from the bottom to the top layer. In addition, the gradient SnOx structure with favorable energy funnels significantly enhances carrier extraction, further minimizing its dependence on the fullerene layer. Its broad applicability for different perovskite compositions and various textured morphology is demonstrated. Notably, the design boosts the efficiencies of perovskite/silicon tandem cells (1.0 cm2) on industrially textured Czochralski (CZ) silicon to a certified efficiency of 28.0%.

Numerical simulation based performance enhancement approach for an inorganic BaZrS3/CuO heterojunction solar cell

One of the main components of the worldwide transition to sustainable energy is solar cells, usually referred to as photovoltaics. By converting sunlight into power, they lessen their reliance on fossil fuels and the release of greenhouse gases. Because solar cells are decentralized, distributed energy systems may be developed, which increases the efficiency of the cells. Chalcogenide perovskites have drawn interest due to their potential in solar energy conversion since they provide distinctive optoelectronic characteristics and stability. But high temperatures and lengthy reaction periods make it difficult to synthesise and process them. Therefore, we present the inaugural numerical simulation using SCAPS-1D for emerging inorganic BaZrS3/CuO heterojunction solar cells. This study delves into the behaviour of diverse parameters in photovoltaic devices, encompassing efficiency (η) values, short-circuit current density (Jsc), fill factor (FF), and open-circuit voltage (Voc). Additionally, we thoroughly examine the impact of window and absorber layer thickness, carrier concentration, and bandgap on the fundamental characteristics of solar cells. Our findings showcase the attainment of the highest efficiency (η) values, reaching 27.3% for our modelled devices, accompanied by Jsc values of 40.5 mA/cm2, Voc value of 0.79 V, and FF value of 85.2. The efficiency (η) values are chiefly influenced by the combined effects of Voc, Jsc, and FF values. This optimal efficiency was achieved with CuO thickness, band gap, and carrier concentration set at 5 µm, 1.05 eV, and above 1019 cm-3, respectively. In comparison, the optimal parameters for BaZrS3 include a thickness of 1 µm, a carrier concentration below 1020 cm-3, and a band gap less than 1.6 eV. Therefore, in the near future, the present simulation will simultaneously provide up an entirely novel field for the less defective perovskite solar cell.

Impact of large A-site cations on electron-vibrational interactions in 2D halide perovskites: Ab initio quantum dynamics

Using ab initio nonadiabatic molecular dynamics, we study the effect of large A-site cations on nonradiative electron-hole recombination in two-dimensional Ruddlesden-Popper perovskites HA2APb2I7, HA = n-hexylammonium, A = methylammonium (MA), or guanidinium (GA). The steric hindrance created by large GA cations distorts and stiffens the inorganic Pb-I lattice, reduces thermal structural fluctuations, and maintains the delocalization of electrons and holes at ambient and elevated temperatures. The delocalized charges interact more strongly in the GA system than in the MA system, and the charge recombination is accelerated. In contrast, replacement of only some MA cations with GA enhances disorder and increases charge lifetime, as seen in three-dimensional perovskites. This study highlights the key influence of structural fluctuations and disorder on the properties of charge carriers in metal halide perovskites, providing guidance for tuning materials' optoelectronic performance.

Unveiling heterogeneity of hysteresis in perovskite thin films

The phenomenon of current-voltage hysteresis observed in perovskite-based optoelectronic devices is a critical issue that complicates the accurate assessment of device parameters, thereby impacting performance and applicability. Despite extensive research efforts aimed at deciphering the origins of hysteresis, its underlying causes remain a subject of considerable debate. By employing nanoscale investigations to elucidate the relationship between hysteresis and morphological characteristics, this study offers a detailed exploration of photocurrent-voltage hysteresis at the nanoscale within perovskite optoelectronic devices. Through the meticulous analysis of localized I-V curve arrays, our research identifies two principal hysteresis descriptors, uncovering a predominantly inverted hysteresis pattern in 87% of the locations examined. This pattern is primarily attributed to the energetic barrier encountered at the interface between the probe and the perovskite material. Our findings underscore the pronounced heterogeneity and grain-dependent variability inherent in hysteresis behavior, evidenced by an average Hysteresis Index value of 0.24. The investigation suggests that the localized hysteresis phenomena cannot be exclusively attributed to either photocharge collection processes or organic cation migration at grain boundaries. Instead, it appears significantly influenced by localized surface trap states, which play a pivotal role in modulating electron and hole current dynamics. By identifying the key factors contributing to hysteresis, such as localized surface trap states and their influence on electron and hole current dynamics, our findings pave the way for targeted strategies to mitigate these effects. This includes the development of novel materials and device architectures designed to minimize energy barriers and enhance charge carrier mobility, thereby improving device performance and longevity. This breakthrough in understanding the microscale mechanisms of hysteresis underscores the critical importance of surface/interface defect trap passivation in mitigating hysteretic effects, offering new pathways for enhancing the performance of perovskite solar cells.

Chemical Aspects of Halide Perovskite Nanocrystals

Halide perovskite nanocrystals (HPNCs) are currently among the most intensely investigated group of materials. Structurally related to the bulk halide perovskites (HPs), HPNCs are nanostructures with distinct chemical, optical, and electronic properties and significant practical potential. One of the keys to the effective exploitation of the HPNCs in advanced technologies is the development of controllable, reproducible, and scalable methods for preparation of materials with desired compositions, phases, and shapes and low defect content. Another important condition is a quantitative understanding of factors affecting the chemical stability and the optical and electronic properties of HPNCs. Here we review important recent developments in these areas. Following a brief historical prospective, we provide an overview of known chemical methods for preparation of HPNCs and approaches used to control their composition, phase, size, and shape. We then review studies of the relationship between the chemical composition and optical properties of HPNCs, degradation mechanisms, and effects of charge injection. Finally, we provide a short summary and an outlook. The aim of this review is not to provide a comprehensive summary of all relevant literature but rather a selection of highlights, which, in the subjective view of the authors, provide the most significant recent observations and relevant analyses.

Enhancing the Stability and Efficiency of Inverted Perovskite Solar Cells with a Mixed Ammonium Ligands Passivation Strategy

The perovskite solar cell (PSC), which has achieved efficiencies of more than 26%, is expected to be a promising technology that can alternate silicon-based solar cells. However, the performance of PSCs is still limited due to defects and ion migration that occur at the large number of grain boundaries present in perovskite thin films. In this study, the mixed ammonium ligands passivation strategy (MAPS) is demonstrated, which combines n-octylammonium iodide (OAI) and 1,3-diaminopropane (DAP) can effectively suppress the grain boundary defects and ion migration through grain boundaries by the synergistic effect of OAI and DAP, resulting in improved efficiency and stability of PSCs. It has also been revealed that MAPS not only enhances crystallinity and reduces grain boundaries but also improves charge transport while suppressing charge recombination. The MAPS-based opaque PSC shows the best power conversion efficiency (PCE) of 21.29% with improved open-circuit voltage (VOC ) and fill factor (FF), and retained 84% of its initial PCE after 1900 h at 65 °C in N2 atmosphere. Amazingly, the MAPS-based semi-transparent PSC (STP-PSC) retained 94% of their maximum power (21.00% at around 10% AVT) after 1000 h under 1 sun illumination and MAPS-based perovskite submodule (PSM) achieved a PCE of 19.59%, which is among the highest values reported recently.

Effect of Single-Crystal TiO2/Perovskite Band Alignment on the Kinetics of Electron Extraction

The kinetics of electron extraction at the electron transfer layer/perovskite interface strongly affects the efficiency of a perovskite solar cell. By combining transient absorption and time-resolved photoluminescence spectroscopy, the electron extraction process between FA0.83Cs0.17Pb(I0.83Br0.17)3 and TiO2 single crystals with different orientations of (100), (110), and (111) were probed from subpicosecond to several hundred nanoseconds. It was revealed that the band alignment between the constituents influenced the relative electron extraction process. TiO2(100) showed the fastest overall and hot electron transfer, owing to the largest conduction band and Fermi level offset compared to FA0.83Cs0.17Pb(I0.83Br0.17)3. It was found that an early electron accumulation in these systems can have an influence on the following electron extraction on the several nanosecond time scale. Furthermore, the existence of a potential barrier at the TiO2/perovskite interface was also revealed by performing excitation fluence-dependent measurements.

Defects in lead halide perovskite light-emitting diodes under electric field: from behavior to passivation strategies

Lead halide perovskites (LHPs) are emerging semiconductor materials for light-emitting diodes (LEDs) owing to their unique structure and superior optoelectronic properties. However, defects that initiate degradation of LHPs through external stimuli and prompt internal ion migration at the interfaces remain a significant challenge. The electric field (EF), which is a fundamental driving force in LED operation, complicates the role of these defects in the physical and chemical properties of LHPs. A deeper understanding of EF-induced defect behavior is crucial for optimizing the LED performance. In this review, the origins and characterization of defects are explored, indicating the influence of EF-induced defect dynamics on LED performance and stability. A comprehensive overview of recent defect passivation approaches for LHP bulk films and nanocrystals (NCs) is also provided. Given the ubiquity of EF, a summary of the EF-induced defect behavior can enhance the performance of perovskite LEDs and related optoelectronic devices.

Probing compositional engineering effects on lead-free perovskite-inspired nanocrystal thin films using correlative nonlinear optical microscopy

We introduce the use of correlative third-harmonic generation and multiphoton-induced luminescence microscopy to investigate the impact of manganese (Mn) doping on bismuth (Bi)-based perovskite-inspired nanocrystal thin films. The technique was found to be extremely sensitive to the microscopic features of the perovskite film and its structural compositions, allowing the unambiguous detection of compositionally different emitters in the perovskite film and manipulation of their nonlinear optical responses. Our work unveils a new way to investigate, manipulate, and exploit perovskite-inspired functional materials for nonlinear optical conversion at the nanoscale.

Recent Advances in Wide Bandgap Perovskite Solar Cells: Focus on Lead-Free Materials for Tandem Structures

A tandem solar cell, which is composed of a wide bandgap (WBG) top sub-cell and a narrow bandgap (NBG) bottom subcell, harnesses maximum photons in the wide spectral range, resulting in higher efficiency than single-junction solar cells. WBG (>1.6 eV) perovskites are currently being studied a lot based on lead mixed-halide perovskites, and the power conversion efficiency of lead mixed-halide WBG perovskite solar cells (PSCs) reaches 21.1%. Despite the excellent device performance of lead WBG PSCs, their commercialization is hampered by their Pb toxicity and low stability. Hence, lead-free, less toxic WBG perovskite absorbers are needed for constructing lead-free perovskite tandem solar cells. In this review, various strategies for achieving high-efficiency WBG lead-free PSCs are discussed, drawing inspiration from prior research on WBG lead-based PSCs. The existing issues of WBG perovskites such as VOC loss are discussed, and toxicity issues associated with lead-based perovskites are also addressed. Subsequently, the natures of lead-free WBG perovskites are reviewed, and recently emerged strategies to enhance device performance are proposed. Finally, their applications in lead-free all perovskite tandem solar cells are introduced. This review presents helpful guidelines for eco-friendly and high-efficiency lead-free all perovskite tandem solar cells.

In Situ Surface Reconstruction toward Planar Heterojunction for Efficient and Stable FAPbI3 Quantum Dot Solar Cells

Pure-phase α-FAPbI3 quantum dots (QDs) are the focus of an increasing interest in photovoltaics due to their superior ambient stability, large absorption coefficient, and long charge-carrier lifetime. However, the trap states induced by the ligand-exchange process limit the photovoltaic performances. Here, a simple post treatment using methylamine thiocyanate is developed to reconstruct the FAPbI3 -QD film surface, in which a MAPbI3 capping layer with a thickness of 6.2 nm is formed on the film top. This planar perovskite heterojunction leads to a reduced density of trap-states, a decreased band gap, and a facilitated charge carrier transport. As a result, a record high power conversion efficiency (PCE) of 16.23% with negligible hysteresis is achieved for the FAPbI3 QD solar cell, and it retains over 90% of the initial PCE after being stored in ambient environment for 1000 h.

Passivating A-Site and X-Site Vacancies Simultaneously via N-Heterocyclic Amines for Efficient Cs2AgBiBr6 Solar Cells

To address the toxicity and stability issues of traditional lead halide perovskite solar cells (PSCs), the development of lead-free PSCs, such as Cs2AgBiBr6 solar cells, is of great significance. However, due to the low defect formation energy of Cs2AgBiBr6, a large number of vacancies, including A-site vacancies and X-site vacancies, form during the fabrication process of the Cs2AgBiBr6 film, which seriously damage the performance of the devices. The traditional phenylethylammonium (PEA) cation, mainly focusing on passivating A-site vacancies, is incapable of reducing X-site vacancies and so results in a limited performance improvement in Cs2AgBiBr6 solar cells. Herein, inspired by the capability of the Lewis base to coordinate with metal cations, a series of N-heterocyclic amines are introduced to serve as a dual-site passivator, reducing A-site and X-site vacancies at the same time. The highest power conversion efficiency of modified Cs2AgBiBr6 solar cells has been increased 36% from 1.10 to 1.50%. Further investigation reveals that the higher electron density of additives would lead to a stronger interaction with metal cations like Ag+ and Bi3+, thus reducing more X-site defects and improving carrier dynamics. Our work provides a strategy for passivating perovskite with various kinds of defects and reveals the connection between the coordination capability of additives and device performance enhancement, which could be instructive in improving the performance of lead-free PSCs.

Effect of Connectivity on the Carrier Transport and Recombination Dynamics of Perovskite Quantum-Dot Networks

Quantum-dot (QD) solids are being widely exploited as a solution-processable technology to develop photovoltaic, light-emission, and photodetection devices. Charge transport in these materials is the result of a compromise between confinement at the individual QD level and electronic coupling among the different nanocrystals in the ensemble. While this is commonly achieved by ligand engineering in colloidal-based systems, ligand-free QD assemblies have recently emerged as an exciting alternative where nanostructures can be directly grown into porous matrices with optical quality as well as control over their connectivity and, hence, charge transport properties. In this context, we present a complete photophysical study comprising fluence- and temperature-dependent time-resolved spectroscopy to study carrier dynamics in ligand-free QD networks with gradually varying degrees of interconnectivity, which we achieve by changing the average distance between the QDs. Analysis of the photoluminescence and absorption properties of the QD assemblies, involving both static and time-resolved measurements, allows us to identify the weight of the different recombination mechanisms, both radiative and nonradiative, as a function of QD connectivity. We propose a picture where carrier diffusion, which is needed for any optoelectronic application and implies interparticle transport, gives rise to the exposure of carriers to a larger defect landscape than in the case of isolated QDs. The use of a broad range of fluences permits extracting valuable information for applications demanding either low- or high-carrier-injection levels and highlighting the relevance of a judicious design to balance recombination and diffusion.

Infrared-reflective ultrathin-metal-film-based transparent electrode with ultralow optical loss for high efficiency in solar cells

In this work we study in-depth the antireflection and filtering properties of ultrathin-metal-film-based transparent electrodes (MTEs) integrated in thin-film solar cells. Based on numerical optimization of the MTE design and the experimental characterization of thin-film perovskite solar cell (PSC) samples, we show that reflection in the visible spectrum can be strongly suppressed, in contrast to common belief (due to the compact metal layer). The optical loss of the optimized electrode (~ 2.9%), composed of a low-resistivity metal and an insulator, is significantly lower than that of a conventional transparent conductive oxide (TCO ~ 6.3%), thanks to the very high transmission of visible light within the cell (> 91%) and low thickness (< 70 nm), whereas the reflection of infrared light (~ 70%) improves by > 370%. To assess the application potentials, integrated current density > 25 mA/cm2, power conversion efficiency > 20%, combined with vastly reduced device heat load by 177.1 W/m2 was achieved in state-of-the-art PSCs. Our study aims to set the basis for a novel interpretation of composite electrodes/structures, such as TCO-metal-TCO, dielectric-metal-dielectric or insulator-metal-insulator, and hyperbolic metamaterials, in high-efficiency optoelectronic devices, such as solar cells, semi-transparent, and concentrated systems, and other electro-optical components including smart windows, light-emitting diodes, and displays.

The Electrical Behaviors of Grain Boundaries in Polycrystalline Optoelectronic Materials

Polycrystalline optoelectronic materials are widely used for photoelectric signal conversion and energy harvesting and play an irreplaceable role in the semiconductor field. As an important factor in determining the optoelectronic properties of polycrystalline materials, grain boundaries (GBs) are the focus of research. Particular emphases are placed on the generation and height of GB barriers, how carriers move at GBs, whether GBs act as carrier transport channels or recombination sites, and how to change the device performance by altering the electrical behaviors of GBs. This review introduces the evolution of GB theory and experimental observation history, classifies GB electrical behaviors from the perspective of carrier dynamics, and summarizes carrier transport state under external conditions such as bias and illumination and the related band bending. Then the carrier scattering at GBs and the electrical differences between GBs and twin boundaries are discussed. Last, the review describes how the electrical behaviors of GBs can be influenced and modified by treatments such as passivation or by consciously adjusting the distribution of grain boundary elements. By studying the carrier dynamics and the relevant electrical behaviors of GBs in polycrystalline materials, researchers can develop optoelectronics with higher performance.

Towards Long-Term Stable Perovskite Solar Cells: Degradation Mechanisms and Stabilization Techniques

It is certain that perovskite materials must be a game-changer in the solar industry as long as their stability reaches a level comparable with the lifetime of a commercialized Si photovoltaic. However, the operational stability of perovskite solar cells and modules still remains unresolved, especially when devices operate in practical energy-harvesting modes represented by maximum power point tracking under 1 sun illumination at ambient conditions. This review article covers from fundamental aspects of perovskite instability including chemical decomposition pathways under light soaking and electrical bias, to recent advances and techniques that effectively prevent such degradation of perovskite solar cells and modules. In particular, fundamental causes for permanent degradation due to ion migration and trapped charges are overviewed and explain their interplay between ions and charges. Based on the degradation mechanism, recent advances on the strategies are discussed to slow down the degradation during operation for a practical use of perovskite-based solar devices.

Recent Advances in Photochargeable Integrated and All-in-One Supercapacitor Devices

Photoassisted energy storage systems, which enable both the conversion and storage of solar energy, have attracted attention in recent years. These systems, which started about 20 years ago with the individual production of dye-sensitized solar cells and capacitors and their integration, today allow more compact and cost-effective designs using dual-acting electrodes. Solar-assisted batterylike or hybrid supercapacitors have also shown promise with their high energy densities. This review summarizes all of these device designs and conveys the cutting-edge studies in this field. Besides, this review aims to emphasize the effects of point, extrinsic, intrinsic, and 2D-planar defects on the performance of photoassisted energy storage systems since it is known that defect structures, as well as electrical, optical, and surface properties, affect the device performance. Here, it is also targeted to draw attention to how critical the design, material selection, and material properties are for these new-generation energy conversion and storage devices, which have a high potential to see commercial examples quickly and to be recognized by more readers.

Criteria for Efficient Photocatalytic Water Splitting Revealed by Studying Carrier Dynamics in a Model Al-doped SrTiO3 Photocatalyst

Overall water splitting (OWS) using semiconductor photocatalysts is a promising method for solar fuel production. Achieving a high quantum efficiency is one of the most important prerequisites for photocatalysts to realize high solar-to-fuel efficiency. In a recent study (Nature 2020, 58, 411-414), a quantum efficiency of almost 100 % has been achieved in an aluminum-doped strontium titanate (SrTiO3  : Al) photocatalyst. Herein, using the SrTiO3  : Al as a model photocatalyst, we reveal the criteria for efficient photocatalytic water splitting by investigating the carrier dynamics through a comprehensive photoluminescence study. It is found that the Al doping suppresses the generation of Ti3+ recombination centers in SrTiO3 , the surface band bending facilitates charge separation, and the in situ photo-deposited Rh/Cr2 O3 and CoOOH co-catalysts render efficient charge extraction. By suppressing photocarrier recombination and establishing a facile charge separation and extraction mechanism, high quantum efficiency can be achieved even on photocatalysts with a very short (sub-ns) intrinsic photocarrier lifetime, challenging the belief that a long carrier lifetime is a fundamental requirement. Our findings could provide guidance on the design of OWS photocatalysts toward more efficient solar-to-fuel conversion.

Characterizing Spatial and Energetic Distributions of Trap States Toward Highly Efficient Perovskite Photovoltaics

Due to their greater opt electric performance, perovskite photovoltaics (PVs) present huge potential to be commercialized. Perovskite PV's high theoretical efficiency expands the available development area. The passivation of defects in perovskite films is crucial for approaching the theoretical limit. In addition to creating efficient passivation techniques, it is essential to direct the passivation approach by getting precise and real-time information on the trap states through measurements. Therefore, it is necessary to establish quantitative characterization methods for the trap states in energy and 3D spaces. The authors cover the characterization of the spatial and energy distributions of trap states in this article with an eye toward high-efficiency perovskite photovoltaics. After going over the strategies that have been created for characterizing and evaluating trap states, the authors will concentrate on how to direct the creative development of characterization techniques for trap states assessment and highlight the opportunities and challenges of future development. The 3D space and energy distribution mappings of trap states are anticipated to be realized. The review will give key guiding importance for further approaching the theoretical efficiency of perovskite photovoltaics, offering some future research direction and technological assistance for the development of appropriate targeted passivation technologies.

Small to Large Polaron Behavior Induced by Controlled Interactions in Perovskite Quantum Dot Solids

The polaron is an essential photoexcitation that governs the unique optoelectronic properties of organic-inorganic hybrid halide perovskites, and it has been subject to extensive spectroscopic and theoretical investigation over the past decade. A crucial but underexplored question is how the nature of the photogenerated polarons is impacted by the microscopic perovskite structure and what functional properties this affects. To tackle this question, we chemically tuned the interactions between perovskite quantum dots (QDs) to rationally manipulate the polaron properties. Through a suite of time-resolved spectroscopies, we find that inter-QD interactions open an excited-state channel to form large polaron species, which exhibit enhanced spatial diffusion, slower hot polaron cooling, and a longer intrinsic lifetime. At the same time, polaronic excitons are formed in competition via localized band-edge states, exhibiting strong photoluminescence but are limited by shorter intrinsic lifetimes. This control of polaron type and function through tunable inter-QD interactions not only provides design principles for QD-based materials but also experimentally disentangles polaronic species in hybrid perovskite materials.

Charge carrier dynamics and transient spectral evolutions in lead halide perovskites

Lead halide perovskites (LHPs) have emerged as promising materials for solar cell applications due to their unique photophysical properties. Most of the crucial properties related to solar cell performance such as carrier mobility, diffusion length, recombination rates, etc. have been estimated using ultrafast spectroscopic methods. While various methods have been developed to prepare and fabricate high-quality perovskite films for photovoltaic applications, understanding the charge carrier dynamics is also crucial at each stage of the charge generation, cooling, and recombination processes. Using femtosecond (fs) transient absorption (TA) spectroscopy, various stages of charge carrier dynamics in perovskite materials could be monitored. In this article, we focus on some of the recent experimental developments related to charge carrier dynamics in perovskites and discuss the current understanding of (1) exciton dissociation, (2) charge carrier thermalization, (3) hot carrier cooling, and (4) electron-phonon coupling along with some of the crucial spectral emergence in the pump-probe experiments of LHP materials.

Effect of Chloride Incorporation on the Intermediate Phase and Film Morphology of Methylammonium Lead Halide Perovskites

The influence of chloride integration on perovskite film deposition, encompassing both the structures of intermediate phases and the properties of the final films, was explored. Our methodology involved the fabrication of perovskite intermediate-phase films with varying concentrations of methylammonium chloride (MACl). Subsequently, we conducted an analysis employing X-ray diffraction and Rietveld refinement, incorporating the March-Dollase correction, to gain insights into how chloride-induced intermediate phases impact film morphology. Remarkably, a distinct preferred orientation was observed in the (020) lattice plane perpendicular to the substrate surface, and this orientation was found to be directly correlated to the MACl concentration. This distinctive arrangement of chloride-induced intermediate-phase complexes facilitated controlled crystallization, leading to highly oriented crystals and an improved film morphology. As a consequence, perovskite solar cell devices incorporating chloride-containing methylammonium lead iodide achieved a power conversion efficiency exceeding 20%. These findings suggest a crucial link between the preferred orientation observed in the final chlorine-derived perovskite films and the intermediate-phase structure formed during the initial stages of perovskite formation. These results suggest a profound impact of intermediate phase compositions and crystal structures on perovskite formation, emphasizing the importance of a comprehensive understanding of these factors to enable precise control over ideal structures and the subsequent transformation into high-quality perovskite films.

The Scale Effects of Organometal Halide Perovskites

Organometal halide perovskites have achieved great success in solution-processed photovoltaics. The explorations quickly expanded into other optoelectronic applications, including light-emitting diodes, lasers, and photodetectors. An in-depth analysis of the special scale effects is essential to understand the working mechanisms of devices and optimize the materials towards an enhanced performance. Generally speaking, organometal halide perovskites can be classified in two ways. By controlling the morphological dimensionality, 2D perovskite nanoplatelets, 1D perovskite nanowires, and 0D perovskite quantum dots have been studied. Using appropriate organic and inorganic components, low-dimensional organic-inorganic metal halide hybrids with 2D, quasi-2D, 1D, and 0D structures at the molecular level have been developed and studied. This provides opportunities to investigate the scale-dependent properties. Here, we present the progress on the characteristics of scale effects in organometal halide perovskites in these two classifications, with a focus on carrier diffusion, excitonic features, and defect properties.

Advances in chloride additives for high-efficiency perovskite solar cells: multiple points of view

Chloride (Cl) additives are rather effective in improving the performance of perovskite solar cells (PSCs) through the modulation of crystallization process and surface morphology. After incorporating Cl-containing additives, the optoelectrical properties of perovskite films, such as the electron/hole diffusion length and carrier lifetime, are greatly enhanced. However, only a trace amount of Cl has been identified in the resultant perovskite film, and the mechanism of efficiency improvement induced by Cl remains unclear. In this review, we discuss organic and inorganic Cl additives systematically from the perspective of their solubility, volatility, cation size and chemical groups. In addition, the roles of residual Cl anions and cations are analyzed in detail. Finally, some valuable future perspectives of Cl additives are proposed.

Enhanced Resonance for Facilitated Modulation of Large-Area Perovskite Films with Stable Photovoltaics

Upscaling efficient and stable perovskite films is a challenging task in the industrialization of perovskite solar cells partly due to the lack of high-performance hole transport materials (HTMs), which can simultaneously promote hole transport and regulate the quality of perovskite films especially in inverted solar cells. Here, a novel HTM based on N-C = O resonance structure is designed for facilitating the modulation of the crystallization and bottom-surface defects of perovskite films. Benefiting from the resonance interconversion (N-C = O and N+ = C-O- ) in donor-resonance-donor (D-r-D) architecture and interactions with uncoordinated Pb2+ in perovskite, the resulting D-r-D HTM with two donor units exhibits not only excellent hole extraction and transport capacities, but also efficient crystallization modulation of perovskite for high-quality photovoltaic films in large area. The D-r-D HTM-based large-area (1.02 cm2 ) devices exhibit high power conversion efficiencies (PCEs) up to 21.0%. Moreover, the large-area devices have excellent photo-thermal stability, showing only a 2.6% reduction in PCE under continuous AM 1.5G light illumination at elevated temperature (≈65 °C) for over 1320 h without encapsulation.

Interface Modification for Energy Level Alignment and Charge Extraction in CsPbI3 Perovskite Solar Cells

In perovskite solar cells (PSCs) energy level alignment and charge extraction at the interfaces are the essential factors directly affecting the device performance. In this work, we present a modified interface between all-inorganic CsPbI3 perovskite and its hole-selective contact (spiro-OMeTAD), realized by the dipole molecule trioctylphosphine oxide (TOPO), to align the energy levels. On a passivated perovskite film, with n-octylammonium iodide (OAI), we created an upward surface band-bending at the interface by TOPO treatment. This improved interface by the dipole molecule induces a better energy level alignment and enhances the charge extraction of holes from the perovskite layer to the hole transport material. Consequently, a Voc of 1.2 V and a high-power conversion efficiency (PCE) of over 19% were achieved for inorganic CsPbI3 perovskite solar cells. Further, to demonstrate the effect of the TOPO dipole molecule, we present a layer-by-layer charge extraction study by a transient surface photovoltage (trSPV) technique accomplished by a charge transport simulation.

A Templating Approach to Controlling the Growth of Coevaporated Halide Perovskites

Metal halide perovskite semiconductors have shown significant potential for use in photovoltaic (PV) devices. While fabrication of perovskite thin films can be achieved through a variety of techniques, thermal vapor deposition is particularly promising, allowing for high-throughput fabrication. However, the ability to control the nucleation and growth of these materials, particularly at the charge-transport layer/perovskite interface, is critical to unlocking the full potential of vapor-deposited perovskite PV. In this study, we explore the use of a templating layer to control the growth of coevaporated perovskite films and find that such templating leads to highly oriented films with identical morphology, crystal structure, and optoelectronic properties independent of the underlying layers. Solar cells incorporating templated FA0.9Cs0.1PbI3-xClx show marked improvements with steady-state power conversion efficiency over 19.8%. Our findings provide a straightforward and reproducible method of controlling the charge-transport layer/coevaporated perovskite interface, further clearing the path toward large-scale fabrication of efficient PV devices.

3D-Heterojunction Based on Embedded Perovskite Micro-Sized Single Crystals for Fast Photomultiplier Photodetectors with Broad/Narrowband Dual-Mode

A fast photomultiplier photodetector with a broad/narrowband dual mode is implemented using a new 3D heterostructure based on embedded perovskite micro-sized single crystals. Because the single-crystal size is smaller than the electrode size, the active layer can be divided into a perovskite microcrystalline part for charge transport and a polymer-embedded part for charge storage. This induces an additional radial interface in the 3D heterojunction structure, and allows a photogenerated built-in electric field in the radial direction, especially when the energy levels between the perovskite and embedding polymer are similar. This type of heterojunction has a small radial capacitance that can effectively reduce carrier quenching and accelerate the carrier response. By controlling the applied bias direction, up to 300-1000% external quantum efficiency (EQE) and microsecond response can be achieved not only in the wide range of ultraviolet to visible light from 320 to 550 nm, but also in the narrow-band response with a full width at half minimum (FWHM) of 20 nm. This shows great potential for applications in integrated multifunctional photodetectors.

Temperature-Dependent Intensity Modulated Two-Photon Excited Fluorescence Microscopy for High Resolution Mapping of Charge Carrier Dynamics

We present a temperature-dependent intensity modulated two-photon excited fluorescence microscopy technique that enables high-resolution quantitative mapping of charge carrier dynamics in perovskite microcrystal film. By disentangling the emission into harmonics of the excitation modulation frequency, we analyze the first and second order charge carrier recombination processes, including potential accumulation effects. Our approach allows for a quantitative comparison of different emission channels at a micrometer resolution. To demonstrate the effectiveness of the method, we applied it to a methylammonium lead bromide perovskite microcrystal film. We investigated the temperature-dependent modulated imaging, encompassing the exciton dissociation-association and charge carrier trapping-detrapping equilibrium. Additionally, we explored the potential freezing out of traps and the phase transition occurring at low temperatures.

Impact of compact TiO2 interface modification on the crystallinity of perovskite solar cells

The effect of TiO2 interfacial morphology on perovskite crystallinity was investigated by modifying the micro and nanoscale surface roughness of compact TiO2. While surface treatments of the compact TiO2 layer are recognized as effective strategies to enhance the photovoltaic performance of perovskite solar cells, the discussion regarding the crystallinity of perovskite atop TiO2 has been limited. In this study, we explored the impact of micro and nano scale interface morphology on perovskite crystal formation and its subsequent effects on device performance. Surprisingly, despite the absence of noticeable voids at the interface between the compact TiO2 and perovskite layers, the perovskite crystal morphology exhibited significant improvement following either micro or nanoscale interfacial modification. This enhancement ultimately led to improved photoconversion efficiency and reduced I-V hysteresis. These results emphasize the importance of underlayer surface morphology in the perovskite crystallization and suggest that the presence of grain boundaries within the perovskite layer may also contribute to I-V hysteresis in perovskite solar cells.