Understanding Starch Structure: Recent Progress

Functional Roles of N-Terminal Domains in Pullulanase from Human Gut Lactobacillus acidophilus

Pullulanases are multidomain α-glucan debranching enzymes with one or more N-terminal domains (NTDs) including carbohydrate-binding modules (CBMs) and domains of unknown function (DUFs). To elucidate the roles of NTDs in Lactobacillus acidophilus NCFM pullulanase (LaPul), two truncated variants, Δ41-LaPul (lacking CBM41) and Δ(41+DUFs)-LaPul (lacking CBM41 and two DUFs), were produced recombinantly. LaPul recognized 1.3- and 2.2-fold more enzyme attack-sites on starch granules compared to Δ41-LaPul and Δ(41+DUFs)-LaPul, respectively, as measured by interfacial kinetics. Δ41-LaPul displayed markedly lower affinity for starch granules and β-cyclodextrin (10- and >21-fold, respectively) in comparison to LaPul, showing substrate binding mainly stems from CBM41. Δ(41+DUFs)-LaPul exhibited a 12 °C lower melting temperature than LaPul and Δ41-LaPul, indicating that the DUFs are critical for LaPul stability. Notably, Δ41-LaPul exhibited a 14-fold higher turnover number (kcat) and 9-fold higher Michaelis constant (KM) compared to LaPul, while Δ(41+DUFs)-LaPul's values were close to those of LaPul, possibly due to the exposure of aromatic by truncation.

Granular architecture of lotus seed starch and its impact on physicochemical properties

Lotus seed starch has high apparent amylose content (AAM). A representative definition of its granular architecture (e.g., lamellar structure) remained absent. This study defined the granular shape, crystalline and lamellar structures, and digestibility of twenty-two samples of lotus seed starch (LS) by comparing with those of potato and maize starches. LS granules had more elongated shape and longer repeat distance of lamellae than potato and maize starch granules. The enzymatic susceptibility of LS granules was more affected by AAM than granular architecture. Using these LSs as a model system, the relationships between lamellar structure of starch granules and properties of their gelatinized counterparts were investigated. In LSs, thinner amorphous lamella and thicker crystalline lamella were associated with higher swelling power and yield stress. The relationships were found to be connected via certain structural characteristics of amylopectin.

Glucan, water dikinase (GWD) penetrates the starch granule surface and introduces C6 phosphate in the vicinity of branching points

Starch phosphorylation mediated by α-glucan, water dikinase is an integral part of starch metabolism. So far however, it is not fully understood. For getting deeper insights, several in vitro assays and intensive mass spectrometry analyses were performed. Such analyses allowed us to determine the phosphorylation position within the amylopectin in detail. Thus, unique features of the starch structure and GWD action were correlated. Therefore, recombinant potato GWD (Solanum tuberosum L.; StGWD) was used for detailed analyses of the phosphorylation pattern of various starches. Additionally, oil palm (Elaeis guineensis Jacq.; EgGWD) GWD was cloned and characterized, representing the first characterization of GWD of a monocot species. The distribution patterns of single phosphorylated glucan chains catalyzed by both GWDs were compared. The phosphorylation distribution patterns of both GWDs varied for different starches. It was proven that GWD phosphorylates different positions within the amylopectin of native starch granules. GWD enters the starch granule surface and phosphorylates the glucosyl units in the proximity of branching points to convert the highly ordered glucan chains into a less ordered state and to render them accessible for the downstream acting hydrolases. This enables deciphering the GWD actions and the related structural properties of starch granules.

Improved electrochemical performance of bio-derived plasticized starch/ reduced graphene oxide/ molybdenum disulfide ternary nanocomposite for flexible energy storage applications

A ternary nanocomposite of plasticized starch (PS), reduced graphene oxide (rGO), and molybdenum disulfide (MoS2) was prepared via a solution casting process, with MoS2 concentrations ranging from 0.25 to 1.00 wt%. The structural, surface morphological, optical, and electrochemical properties of the nanocomposites were studied. FTIR analysis reveals the formation of new chemical bonds between PS, rGO, and MoS2, indicating strong interactions among them. The XRD analysis showed a reduction in the crystallinity of the nanocomposite from 40 to 21% due to the incorporation of nanofiller. FESEM micrograph showed an increment of the surface roughness due to the incorporation of rGO-MoS2 layers. UV-vis spectroscopy demonstrated a reduction of optical bandgap from 4.71 to 2.90 eV, resulting from enhanced charge transfer between the layers and defect states due to the addition of nanofillers. The incorporation of MoS2 increase the specific capacitance of the PS from 2.78 to 124.98 F g-1 at a current density of 0.10 mA g-1. The EIS analysis revealed that the nanofiller significantly reduces the charge transfer resistance from 4574 to 0 Ω, facilitating the ion transportation between the layers. The PS/rGO/MoS2 nanocomposite also exhibited excellent stability, retaining about 85% of its capacitance up to 10,000 charging-discharging cycles. These biocompatible polymer-based nanocomposites with improved electrochemical performance synthesized from an easy and economical route may offer a promising direction to fabricate a nature-friendly electrode material for energy storage applications.

Characterization and Evaluation of Heat-Moisture-Modified Black and Red Rice Starch: Physicochemical, Microstructural, and Functional Properties

This study sought to evaluate starch from black and red rice modified by heat-moisture, investigating the extraction yield, starch and amylose content, color, and phenolic compounds. The water and oil absorption capacity, whole milk and zero lactose absorption index, syneresis index, and texture were also analyzed. Microstructural analysis included Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The heat-moisture treatment (HMT) reduced the extraction yield and the starch and amylose content, with native black rice starch having the highest values for these parameters. The modification also affected the color and phenolic compounds of the starch, making it darker and changing its appearance. The modification improved the absorption of water, oil, and milk, reducing syneresis and increasing stability during storage. The starch surface was altered, especially for modified black rice starch, with larger agglomerates. The type of starch also changed from A to Vh, with lower relative crystallinity. The textural properties of modified red rice starch were also significantly altered. The HMT proved to be a viable and economical option to modify the analyzed parameters, influencing the texture and physicochemical properties of pigmented rice starch, expanding its applications, and improving its stability during storage at temperatures above 100 °C.

Understanding CaCl2 induces surface gelatinization to promote cold plasma modified maize starch: Structure-effect relations

To investigate the influence of surface gelatinization on cold plasma (CP) modification of starch, this study used CaCl2 to modify maize starch by surface gelatinization, further combined with CP treatment and characterized its multi-scale structure and physicochemical properties. The results revealed that starch surface gelatinization causes roughness and fragmentation on the granule surface, and CP undergoes etching effects. The synergistic modification promotes starch degradation, as evidenced by molecular weight decrease and short-chain ratio increase. Although the growth rings, FT-IR patterns, and crystal types of starch remained unchanged, the synergistic modification induced a reduction in the short-range orderliness and crystallinity of starch, thus causing a decrease in the pasting properties and contributing to its solubility. Notably, the CP treatment improved the RDS and SDS contents of the gelatinized starch due to more active sites on the granule surface after gelatinization, and this finding may provide insight into the deep processing of starch.

Starch-based materials for drug delivery in the gastrointestinal tract-A review

Starch is a natural copolymer with unique physicochemical characteristics. Historically, it has been physically, chemically, or enzymatically modified to obtain ad-hoc functional properties for its use in different applications. In this context, the use of starch-based materials in drug delivery systems (DDSs) has gained great attention mainly because it is cheap, biodegradable, biocompatible, and renewable. This paper reviews the state of the art in starch-based materials design for their use in drug-controlled release with internal stimulus responsiveness; i.e., pH, temperature, colonic microbiota, or enzymes; specifically, those orally administered for its release in the gastrointestinal tract (GIT). Physical-chemical principles in the design of these materials taking into account their response to a particular stimulus are discussed. The relationship between the type of DDSs structure, starch modification routes, and the corresponding drug release profiles are systematically analyzed. Furthermore, the challenges and prospects of starch-based materials for their use in stimulus-responsive DDSs are also debated.

High fructan barley lines produced by selective breeding may alter β-glucan and amylopectin molecular structure

Six cross-bred barley lines developed by a breeding strategy with the target to enhance the fructan synthesis activity and reduce the fructan hydrolysis activity were analyzed together with their parental lines, and a reference line (Gustav) to determine whether the breeding strategy also affected the content and molecular structure of amylopectin and β-glucan. The highest fructan and β-glucan content achieved in the novel barley lines was 8.6 % and 12 %, respectively (12.3-fold and 3.2-fold higher than in Gustav). The lines with low fructan synthesis activity had higher starch content, smaller building blocks in amylopectin, and smaller structural units of β-glucans than the lines with high-fructan synthesis activity. Correlation analysis confirmed that low starch content was associated with high amylose, fructan, and β-glucan content, and larger building blocks in amylopectin.

Materials Engineering to Help Pest Control: A Narrative Overview of Biopolymer-Based Entomopathogenic Fungi Formulations

Biopolymer-based formulations show great promise in enhancing the effectiveness of entomopathogenic fungi as bioinsecticides. Chitosan and starch, among other biopolymers, have been utilized to improve spore delivery, persistence, and adherence to target insects. These formulations offer advantages such as target specificity, eco-friendliness, and sustainability. However, challenges related to production costs, stability, and shelf life need to be addressed. Recently, biomimetic lure and kill approaches based on biopolymers offer cost-effective solutions by leveraging natural attractants. Further research is needed to optimize these formulations and overcome challenges. Biopolymer-based formulations have the potential to revolutionize pest control practices, providing environmentally friendly and sustainable solutions for agriculture.

A novel method for obtaining high amylose starch fractions from debranched starch

High amylose starch shows wide applications in food and non-food-based industries. Traditional complex-precipitation approach for the amylose fractionation required a large volume of organic reagents and was possibly risky for food safety. The object of this work was to establish a novel method to obtain starch fractions rich in amylose from debranch starch through repeated short-term retrogradation and centrifugation. Four starch fractions were obtained with the amylose content of 52.08% (C1), 62.28% (C2), 63.58% (C3), and 64.74% (C4). The thermograms of samples displayed that multiple endothermic peaks were detected in C1 and C2 and only one endothermic peak with melting temperature over 120 °C were observed in C3 and C4, indicating their differences in retrogradation behavior. The chain length distribution results of sample exhibited that C1 and C2 contained more short chains (DP ≤ 24), while C3 and C4 consisted of mainly long chains (DP ≥ 25). Accordingly, the differences in fine structures could provide more choices for these fractionated high amylose starch to utilize in practical applications.

Determining whether granule structural or surface features govern the wheat starch digestion, a kinetic analysis

Deciphering the determinants of starch digestion from multiple interrelated properties is a challenge that can benefit from multifactorial data analysis. The present study investigated the digestion kinetic parameters (rate, final extent) of size-fractions from four commercial wheat starches with different amylose contents. Each size-fraction was isolated and characterized comprehensively using a large range of analytic techniques (FACE, XRD, CP-MAS NMR, time-domain NMR, DSC…). A statistical clustering analysis applied on the results revealed that the mobility of water and starch protons measured by time-domain NMR was consistently related to the macromolecular composition of the glucan chains and to the ultrastructure of the granule. The final extent of starch digestion was determined by the granule structural features. The digestion rate coefficient dependencies, on the other hand, changed significantly with the range of granule size, i.e. the accessible surface for initial binding of α-amylase. The study particularly showed the molecular order and the chains mobility predominantly limiting or accelerating the digestion rate depending on the accessible surface. This result confirmed the need to differentiate between the surface and the inner-granule related mechanisms in starch digestion studies.

Regulation of multi-scale structures and retrogradation property of A- and B-type wheat starch granules with maltogenic α-amylase

Maltogenic α-amylase (MA) is widely used to modify starch for improving properties. In this work, A- and B-type starches were separated from wheat completely and submitted to MA hydrolysis. Firstly, research in morphological features (SEM) suggested that MA treatment did not destroy the granule integrity. Next, crystalline features from XRD and SAXS assay showed that MA treatment did not change the crystal form, but deceased crystalline sheet (dc) and amorphous sheet (da) thickness in both modified starches. And amorphous sheet was more severely destroyed at higher MA dosage than crystalline sheet. Then changes in molecule structure (HPAEC) showed that MA mainly acted on sides chains with degree of polymerization 12-24 in amylopectin for both starches, resulting in a reduce in peak, trough, and final viscosity obtained from RVA assay. At last, RVA and DSC assay showed that the short-term and long-term retrogradation were retarded in both modified starches. This range of techniques covered changes in multi-scale structures and retrogradation property resulted from MA treatment on both starches, which provided references for studying the changes in structures and properties of MA modified starch granules and provided an important method for retarding retrogradation of starchy foods without gelatinization processing.

Microscopic assessment of the degradation of millet starch granules by endogenous and exogenous enzymes during mashing

The high gelatinization temperature (GT) of millet starch prevents the usage of infusion or step mashes as an effective means to generate fermentable sugars (FS) in brewing because the malt amylases lack thermostability at GT. Here, we investigate processing modifications to determine if millet starch can be efficiently degraded below GT. We determined that producing finer grists through milling did not introduce enough granule damage to markedly change gelatinization characteristics, though there was improved liberation of the endogenous enzymes. Alternatively, exogenous enzyme preparations were added to investigate their ability to degrade intact granules. At the recommended dosages (0.625 μL/g malt), significant FS concentrations were observed, although at lower concentrations and with a much-altered profile than possible with a typical wort. When exogenous enzymes were introduced at high (10×) addition rates, significant losses of granule birefringence and granule hollowing were observed well below GT, suggesting these exogenous enzymes can be utilized to digest millet malt starch below GT. The exogenous maltogenic α-amylase appears to drive the loss of birefringence, but more research is needed to understand the observed predominate glucose production.

Starch-based films doped with porphyrinoid photosensitizers for active skin wound healing

Starch is a biodegradable and biocompatible carbohydrate that, when combined with bioactive molecules, can be processed as biomimetic platforms with enhanced performance, allowing its use as active wound dressing materials. Porphyrinoid photosensitizers can tune the physicochemical/functional profile of biomacromolecules, allowing their use in anti-infective strategies. In this work, the feasibility of using the cationic 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetraiodide (TMPyP) to enhance the physicochemical, mechanical, antimicrobial performance, and wound healing ability of casted starch-based films was studied. TMPyP conferred a reddish coloration to the films, maintaining their pristine transparency. It increased by 87 % the films hydrophobicity and, depending on the TMPyP used, conferred mobility to the starch polymeric chains. Starch/TMPyP-based films effectively photoinactivated Escherichia coli (>99.99 %) and favored the wound healing process, even in the absence of light. Therefore, the incorporation of TMPyP into starch-based formulations revealed to be a promising strategy to tune the films compaction degree while giving rise to water tolerant and photosensitive biomaterials that can act as multitarget antimicrobial medical dressings and glycocarriers of active compounds relevant for effective skin wound healing.

Morphological, textural analysis and freeze-thaw stability of starches from legume grow in Cameroon

Starches from some legume grown in Cameroon were evaluated for their granule structure and size, turbidity, firmness and gel strength, thermal and freeze-thaw properties. Amylose contents were in the range of 26.21%-44.85%. Morphological analysis of the starch granules showed bimodal distribution, multiple sizes and shapes from small spherical to the bigger kidney shape. Significant differences were observed among starch in light transmittance, firmness and gel strength. The thermal parameters of starches were evaluated using differential scanning calorimeter and significant differences were observed. The peak gelatinisation temperature was positively correlated to starch granule size but the amylose content showed no evidence of their impact on legume starch properties studied. The data reported can be useful to facilitate the selection of variety of legume and conditions closer to the desired application.

Moderate Reduction in Nitrogen Fertilizer Results in Improved Rice Quality by Affecting Starch Properties without Causing Yield Loss

The quality and starch properties of rice are significantly affected by nitrogen. The effect of the nitrogen application rate (0, 180, and 230 kg ha^-1) on the texture of cooked rice and the hierarchical structure and physicochemical properties of starch was investigated over two years using two japonica cultivars, Bengal and Shendao505. Nitrogen application contributed to the hardness and stickiness of cooked rice, reducing the texture quality. The amylose content and pasting properties decreased significantly, while the relative crystallinity increased with the increasing nitrogen rates, and the starch granules became smaller with an increase in uneven and pitted surfaces. The proportion of short-chain amylopectin rose, and long-chain amylopectin declined, which increased the external short-range order by 1045/1022 cm^-1. These changes in hierarchical structure and grain size, regulated by nitrogen rates, synergistically increased the setback viscosity, gelatinization enthalpy and temperature and reduced the overall viscosity and breakdown viscosity, indicating that gelatinization and pasting properties were the result of the joint action of several factors. All results showed that increasing nitrogen altered the structure and properties of starch, eventually resulting in a deterioration in eating quality and starch functional properties. A moderate reduction in nitrogen application could improve the texture and starch quality of rice while not impacting on the grain yield.

Starch Modification with Molecular Transformation, Physicochemical Characteristics, and Industrial Usability: A State-of-the-Art Review

Starch is a readily available and abundant source of biological raw materials and is widely used in the food, medical, and textile industries. However, native starch with insufficient functionality limits its utilization in the above applications; therefore, it is modified through various physical, chemical, enzymatic, genetic and multiple modifications. This review summarized the relationship between structural changes and functional properties of starch subjected to different modified methods, including hydrothermal treatment, microwave, pre-gelatinization, ball milling, ultrasonication, radiation, high hydrostatic pressure, supercritical CO₂, oxidation, etherification, esterification, acid hydrolysis, enzymatic modification, genetic modification, and their combined modifications. A better understanding of these features has the potential to lead to starch-based products with targeted structures and optimized properties for specific applications.

Native and modified starches from underutilized seeds: Characteristics, functional properties and potential applications

Seeds represent a potential source of starch, containing at least 60-70% of total starch, however many of them are treated as waste and are usually discarded. The review aim was to analyze the characteristics, functional properties, and potential applications of native and modified starches from underutilized seeds such as Sorghum bicolor L. Moench (WSS), Chenopodium quinoa, Wild. (QSS), Mangifera indica L. (MSS), Persea americana Mill. (ASS), Pouteria campechiana (Kunth) Baehni (PCSS), and Brosimum alicastrum Sw. (RSS). A systematic review of scientific literature was carried out from 2014 to date. Starch from seeds had yields above 30%. ASS had the higher amylose content and ASS and RSS showed the highest values in water absorption capacity and swelling power, contrary to MSS and PCSS while higher thermal resistance, paste stability, and a lower tendency to retrograde were observed in MSS and RSS. Functional properties such as water solubility, swelling power, thermal stability, low retrogradation tendency, and emulsion stability were increased in RSS, WSS, QSS, and MSS with chemical modifications (Oxidation, Oxidation-Crosslinking, OSA, DDSA, and NSA) and physical methods (HMT and dry-heat). Digestibility in vitro showed that WSS and QSS presented high SDS fraction, while ASS, MSS, PCSS, and HMT-QSS presented the highest RS content. Native or modified underutilized seed starches represent an alternative and sustainable source of non-conventional starch with potential applications in the food industry and for the development of healthy foods or for special nutritional requirements.

The alterations in granule, shell, blocklets, and molecular structure of pea starch induced by ultrasound

Understanding the alterations to starch multi-scale structure induced by ultrasound treatment can help in determining the effective application of ultrasound in functional-starch preparation. This study aimed to comprehensively characterize and understand the morphological, shell, lamellae, and molecular structures of pea starch granules treated by ultrasound under different temperatures. Scanning electron microscopy and X-ray diffraction analyses showed that UT (ultrasound treatment) did not change C-type of crystalline, but caused a pitted surface and endowed a looser structure and higher enzyme susceptibility as the temperature increased above 35 °C for pea starch granules. Fourier transform infrared spectroscopy and small-angle X-ray scattering analyses revealed that UT reduced the short-range ordering and increased the thickness of semi-crystalline and amorphous lamellae by inducing starch chain depolymerization, which was manifested by molecule weight and chain length distribution analysis. The sample ultrasound-treated at 45 °C had the higher proportion of B2 chains compared with the other ultrasound-treated samples because the higher ultrasonic temperature altered the disruption sites of starch chains.

A model for the reproduction of amylopectin cluster by coordinated actions of starch branching enzyme isoforms

Amylopectin is a highly branched glucan which accounts for approximately 65-85% of starch in most plant tissues. It is crucially important to understand the biosynthetic process of this glucan in regulating the structure and functional properties of starch granules. Currently, the most accepted ideas of structural feature and biosynthesis of amylopectin are that amylopectin is composed of a branched element called "cluster" and that the essential process of amylopectin biosynthesis is to reproduce a new cluster from the existing cluster. The present paper proposes a model explaining the whole process of amylopectin biosynthesis as to how the new cluster is reproduced by concerted actions of multiple isoforms of starch biosynthetic enzymes, particularly by combinations of distinct roles of starch branching enzyme (BE) isoforms. This model proposes for the first time the molecular mechanism as to how the formation of a new cluster is initiated, and the reason why BEI can play a major role in this step. This is because BEI has a rather broad chain-length preference compared to BEIIb, because a low preference of BEI for the substrate chain-length is advantageous for branching a couple of elongated chains that are not synchronously formed and thus these chains having varied lengths could be safely attacked by this isoform. On the contrary, it is unlikely that BEIIb is involved in this reaction because it can react to only short chains having degree of polymerization of 12-14. BEIIa is possibly able to complement the role of BEI to some extent, because BEIIa can attack basically short chains but its chain-length preference is lower compared with BEIIb. The model implies that the first branches mainly formed by BEI to construct the amorphous lamellae whereas the second branches predominantly formed by BEIIb are located mainly in the crystalline lamellae. This paper provides new insights into the roles of BEI, BEIIb, and BEIIa in amylopectin biosynthesis in cereal endosperm.

Effects of the Molecular Structure of Starch in Foods on Human Health

Starch provides approximately half of humans' food energy, and its structural features influence human health. The most important structural feature is the chain length distribution (CLD), which affects properties such as the digestibility of starch-containing foods. The rate of digestion of such foods has a strong correlation with the prevalence and treatment of diseases such as diabetes, cardiovascular disease and obesity. Starch CLDs can be divided into multiple regions of degrees of polymerization, wherein the CLD in a given region is predominantly, but not exclusively, formed by a particular set of starch biosynthesis enzymes: starch synthases, starch branching enzymes and debranching enzymes. Biosynthesis-based models have been developed relating the ratios of the various enzyme activities in each set to the CLD component produced by that set. Fitting the observed CLDs to these models yields a small number of biosynthesis-related parameters, which, taken together, describe the entire CLD. This review highlights how CLDs can be measured and how the model-based parameters obtained from fitting these distributions are related to the properties of starch-based foods significant for health, and it considers how this knowledge could be used to develop plant varieties to provide foods with improved properties.

Size selectivity in adsorption of polydisperse starches on activated carbon

The influence of molecular weight, polydispersity, and degree of branching of four potato starches (Paselli MD10, Eliane MD6, Eliane MD2, and highly branched starch) on the adsorption rates on activated carbon (Norit CA1) was investigated. Changes in starch concentration and size distribution over time were analysed by Total Starch Assay and Size Exclusion Chromatography. Average molecular weight and degree of branching of a starch scaled negatively with average adsorption rate. Within a size-distribution, adsorption rates scaled negatively with increasing molecule size, resulting in an increased average molecular weight in solution of between 25 % and 213 % and a decreased polydispersity of between 13 % and 38 %. Simulation with dummy distributions estimated the ratio of adsorption rates for 20th percentile and 80th percentile molecules within a distribution to range between a factor 4 and 8 for the different starches. Competitive adsorption decreased the adsorption rate of molecules above the average size within a sample distribution.

Morphology-induced differences in adsorption behaviors and strength enhancement performance for fiber networks between quaternized amylose and amylopectin

Cationic starch is the most widely used paper strength additive for papermaking wet end applications. However, it remains unclear how differently quaternized amylose (QAM) and amylopectin (QAP) are adsorbed on the fiber surface and their relative contribution to the inter-fiber bonding of papers. Herein, separated amylose and amylopectin were quaternized with different degrees of substitution (DS). After that, the adsorption behaviors of QAM and QAP on the fiber surface, the viscoelastic properties of the adlayers and their strength enhancement to fiber networks were comparatively characterized. Based on the results, the morphology visualizations of the starch structure displayed a strong impact on the adsorbed structural distributions of QAM and QAP. QAM adlayer with a helical linear or slightly branched structure was thin and rigid, while the QAP adlayer with a highly branched structure was thick and soft. In addition, the DS, pH and ionic strength had some impacts on the adsorption layer as well. Regarding the paper strength enhancement, the DS of QAM correlated positively to the paper strength, whereas the DS of QAP correlated inversely. The results provide a deep understanding of the impacts of starch morphology on performance and offer us some practical guidelines in starch selection.

Changes in Structural and Thermodynamic Properties of Starch during Potato Tuber Dormancy

The main reserve polysaccharide of plants-starch-is undoubtedly important for humans. One of the main sources of starch is the potato tuber, which is able to preserve starch for a long time during the so-called dormancy period. However, accumulated data show that this dormancy is only relative, which raises the question of the possibility of some kind of starch restructuring during dormancy periods. Here, the effect of long-term periods of tuber rest (at 2-4 °C) on main parameters of starches of potato tubers grown in vivo or in vitro were studied. Along with non-transgenic potatoes, Arabidopsis phytochrome B (AtPHYB) transformants were investigated. Distinct changes in starch micro and macro structures-an increase in proportion of amorphous lamellae and of large-sized and irregular-shaped granules, as well as shifts in thickness of the crystalline lamellae-were detected. The degree of such alterations, more pronounced in AtPHYB-transgenic tubers, increased with the longevity of tuber dormancy. By contrast, the polymorphic crystalline structure (B-type) of starch remained unchanged regardless of dormancy duration. Collectively, our data support the hypothesis that potato starch remains metabolically and structurally labile during the entire tuber life including the dormancy period. The revealed starch remodeling may be considered a process of tuber preadaptation to the upcoming sprouting stage.

Interfacial Catalysis during Amylolytic Degradation of Starch Granules: Current Understanding and Kinetic Approaches

Enzymatic hydrolysis of starch granules forms the fundamental basis of how nature degrades starch in plant cells, how starch is utilized as an energy resource in foods, and develops efficient, low-cost saccharification of starch, such as bioethanol and sweeteners. However, most investigations on starch hydrolysis have focused on its rates of degradation, either in its gelatinized or soluble state. These systems are inherently more well-defined, and kinetic parameters can be readily derived for different hydrolytic enzymes and starch molecular structures. Conversely, hydrolysis is notably slower for solid substrates, such as starch granules, and the kinetics are more complex. The main problems include that the surface of the substrate is multifaceted, its chemical and physical properties are ill-defined, and it also continuously changes as the hydrolysis proceeds. Hence, methods need to be developed for analyzing such heterogeneous catalytic systems. Most data on starch granule degradation are obtained on a long-term enzyme-action basis from which initial rates cannot be derived. In this review, we discuss these various aspects and future possibilities for developing experimental procedures to describe and understand interfacial enzyme hydrolysis of native starch granules more accurately.

Sustainable Valorization of Bioplastic Waste: A Review on Effective Recycling Routes for the Most Widely Used Biopolymers

Plastics-based materials have a high carbon footprint, and their disposal is a considerable problem for the environment. Biodegradable bioplastics represent an alternative on which most countries have focused their attention to replace of conventional plastics in various sectors, among which food packaging is the most significant one. The evaluation of the optimal end-of-life process for bioplastic waste is of great importance for their sustainable use. In this review, the advantages and limits of different waste management routes-biodegradation, mechanical recycling and thermal degradation processes-are presented for the most common categories of biopolymers on the market, including starch-based bioplastics, PLA and PBAT. The analysis outlines that starch-based bioplastics, unless blended with other biopolymers, exhibit good biodegradation rates and are suitable for disposal by composting, while PLA and PBAT are incompatible with this process and require alternative strategies. The thermal degradation process is very promising for chemical recycling, enabling building blocks and the recovery of valuable chemicals from bioplastic waste, according to the principles of a sustainable and circular economy. Nevertheless, only a few articles have focused on this recycling process, highlighting the need for research to fully exploit the potentiality of this waste management route.

Physicochemical properties of starch in sodium chloride solutions and sucrose solutions: Importance of starch structure

The influences of sodium chloride (NaCl)/sucrose on starch properties as affected by starch structural characteristics are little understood. In this study, the effects were observed in relation to the chain length distribution (from size exclusion chromatography) and granular packing (inferred through morphological observation and determination of swelling factor and paste transmittance) of starches. Adding NaCl/sucrose dramatically delayed the gelatinization of starch that had a high ratio of short-to-long amylopectin chains and had loose granular packing. The effects of NaCl on the viscoelasticity of gelatinizing starch were related to the flexibility of amylopectin internal structure. Effects of NaCl/sucrose on starch retrogradation varied with starch structure, co-solute concentration, and analytical method. The co-solute-induced changes in retrogradation were highly associated with amylose chain length distribution. Sucrose strengthened the weak network formed by short amylose chains, while the effect was not significant on amylose chains that were capable of forming strong networks.

More than the main structural genes: Regulation of resistant starch formation in rice endosperm and its potential application

In the past decade, research on resistant starch has evoked interest due to the prevention and inhibition of chronic human diseases, such as diabetes, cancer, and obesity. Increasing the amylose content (AC) and resistant starch (RS) has been pivotal in improving the nutritional benefit of rice. However, the exact mechanism of RS formation is complex due to interconnected genetic factors regulating amylose-amylopectin variation. In this review, we discussed the regulatory factors influencing the RS formation centered on the transcription, post-transcriptional, and post-translational processes. Furthermore, we described the developments in RS and AC levels in rice compared with other high RS cereals. Briefly, we enumerated potential applications of high RS mutants in health, medical, and other industries. We contest that the information captured herein can be deployed for marker-assisted breeding and precision breeding techniques through genome editing to improve rice varieties with enhanced RS content.

Structure and genetic regulation of starch formation in sorghum (Sorghum bicolor (L.) Moench) endosperm: A review

This review focuses on the structure and genetic regulation of starch formation in sorghum (Sorghum bicolor (L.) Moench) endosperm. Sorghum is an important cereal crop that is well suited to grow in regions with high temperatures and limited water resources due to its C4 metabolism. The endosperm of sorghum kernels is a rich source of starch, which is composed of two main components: amylose and amylopectin. The synthesis of starch in sorghum endosperm involves multiple enzymatic reactions, which are regulated by complex genetic and environmental factors. Recent research has identified several genes involved in the regulation of starch synthesis in sorghum endosperm. In addition, the structure and properties of sorghum starch can also be influenced by environmental factors such as temperature, water availability, and soil nutrients. A better understanding of the structure and genetic regulation of starch formation in sorghum endosperm can have important implications for the development of sorghum-based products with improved quality and nutritional value. This review provides a comprehensive summary of the current knowledge on the structure and genetic regulation of starch formation in sorghum endosperm and highlights the potential for future research to further improve our understanding of this important process.

A new insight into the biosynthesis, structure, and functionality of waxy maize starch under drought stress

BACKGROUND

Drought stress (DS) is the main abiotic stress that maize suffers during its whole growth period, and maize is also sensitive to DS. It had been demonstrated that DS could improve the quality of normal maize starch. However, waxy maize, which has special properties, has not been explored in depth, which limits the breeding and cultivation of waxy maize varieties and the application of waxy maize starch. Therefore, in this study, we investigated the effects of DS on the biosynthesis, structure, and functionality of waxy maize starch.

RESULTS

The results showed that DS decreased the expression level of SSIIb, SSIIIa, GBSSIIa, SBEI, SBEIIb, ISAII, and PUL, but increased the expression level of SSI and SBEIIa. DS did not change the average chain length of amylopectin, while increased the relative content of fa chains (RC_fa ) and decreased the RC_fb1 and RC_fb3 . Furthermore, DS decreased the amylose content, amorphous lamellar distance d_a , semi-crystalline repeat distance, and average particle size, whereas it increased the relative crystallinity, crystalline distance d_c , the content of rapidly digested starch in the uncooked system and resistant starch content in both the uncooked and cooked system.

CONCLUSIONS

For waxy maize, DS could raise the relative expression level of SSI and SBEIIa, thus increasing RC_fa . The larger number of RC_fa could create steric hindrance, which can lead to producing more resistant starch in waxy maize starch. © 2023 Society of Chemical Industry.

Importance of Inactivation Methodology in Enzymatic Processing of Raw Potato Starch: NaOCl as Efficient α-Amylase Inactivation Agent

Efficient inactivation of microbial α-amylases (EC 3.2.1.1) can be a challenge in starch systems as the presence of starch has been shown to enhance the stability of the enzymes. In this study, commonly used inactivation methods, including multistep washing and pH adjustment, were assessed for their efficiency in inactivating different α-amylases in presence of raw potato starch. Furthermore, an effective approach for irreversible α-amylase inactivation using sodium hypochlorite (NaOCl) is demonstrated. Regarding inactivation by extreme pH, the activity of five different α-amylases was either eliminated or significantly reduced at pH 1.5 and 12. However, treatment at extreme pH for 5 min, followed by incubation at pH 6.5, resulted in hydrolysis yields of 42–816% relative to controls that had not been subjected to extreme pH. “Inactivation” by multistep washing with water, ethanol, and acetone followed by gelatinization as preparation for analysis gave significant starch hydrolysis compared to samples inactivated with NaOCl before the wash. This indicates that the further starch degradation observed in samples subjected to washing only took place during the subsequent gelatinization. The current study demonstrates the importance of inactivation methodology in α-amylase-mediated raw starch depolymerization and provides a method for efficient α-amylase inactivation in starch systems.

Starch granular size and multi-scale structure determine population patterns in bivariate flow cytometry sorting

Bivariate flow cytometry (FC) sorting with forward scatter (FSC) and side scatter (SSC) is a recently established novel technique to separate starch granules. However, the forming mechanism of starch FC-dependent population patterns (i.e. the number of subgroups (NS) and FSC/SSC-dependent distribution patterns) remain partly elusive. For this, the correlation of granular size and multi-scale structure of native starches and FC-dependent population patterns was investigated through employing a wide range of native starches originating from different species involving cereal-, pulse-, and tuber crops. Results showed NS was pertinent with particle size, amylose content (AC), amylopectin chains length distribution, lamellar structure, short-range ordered structure. The distinct NS was determined by impacts of native starch FSC / SSC-dependent distribution patterns. Specifically, starch granular size significantly correlated with both FSC and SSC-dependent distribution patterns. The proportion of chains with DP 6-12 was the intra-molecular decisive factor to influence short-range ordered structure, finally leading to FSC-dependent distribution patterns. By contrast, AC was another intra-molecular index to determine SSC-dependent distribution patterns through affecting lamellar structure and short-range ordered structure.

Mechanical wounds expedited starch degradation in the wound tissues of potato tubers

Starch degradation occurs rapidly in stressed plants, but it is unclear how starch degradation occurs in potato tubers after they incur mechanical wounding. In this study, we found that wounding significantly upregulated the expression levels of StGWD, StAMY, StBAM, and StISA, and decreased the starch content of potato tubers. Meanwhile, wounding markedly upregulated the expression levels of StSUS, StBG, and StINV genes, and increased the content of sucrose, glucose, and fructose. Furthermore, wounding reduced the proportion of small starch granules and increase that of large as well as medium starch granules, in this way enhancing the average size distribution of starch. Initially, the hard surface layer of starch granules was removed by wounding, but the internal channels and other structures were only slightly affected. Taken together, the results show that wounding can accelerate starch degradation by promoting the accumulation of sucrose, glucose, and fructose, and the hydrolysis of starch granules in potato tubers.

Effects of primary, secondary and tertiary structures on functional properties of thermoplastic starch biopolymer blend films

To better understand the correlation between structure and properties in thermoplastic starch biopolymer blend films, the effects of amylose content, chain length distribution of amylopectin and molecular orientation of thermoplastic sweet potato starch (TSPS) and thermoplastic pea starch (TPES) on microstructure and functional properties of thermoplastic starch biopolymer blend films were studied. After thermoplastic extrusion, the amylose contents of TSPS and TPES decreased by 16.10 % and 13.13 %, respectively. The proportion of the chains with the degree of polymerization between 9 and 24 of amylopectin in TSPS and TPES increased from 67.61 % to 69.50 %, and from 69.51 % to 71.06 %, respectively. As a result, the degree of crystallinity and molecular orientation of TSPS and TPES films increased as compared to sweet potato starch and pea starch films. The thermoplastic starch biopolymer blend films possessed a more homogeneous and compacter network. The tensile strength and water resistance of thermoplastic starch biopolymer blend films increased significantly, whereas thickness and elongation at break of thermoplastic starch biopolymer blend films decreased significantly.

One-Handed Helical Tubular Ladder Polymers for Chromatographic Enantioseparation

Defect-free one-handed contracted helical tubular ladder polymers with a π-electron-rich cylindrical helical cavity were synthesized by alkyne benzannulations of the random-coil precursor polymers containing 6,6'-linked-1,1'-spirobiindane-7,7'-diol-based chiral monomer units. The resulting tightly-twisted helical tubular ladder polymers showed remarkably high enantioseparation abilities toward a variety of chiral hydrophobic aromatics with point, axial, and planar chiralities. The random-coil precursor polymer and analogous rigid-rod extended helical ribbon-like ladder polymer with no internal helical cavity exhibited no resolution abilities. The molecular dynamics simulations suggested that the π-electron-rich cylindrical helical cavity formed in the tightly-twisted tubular helical ladder structures is of key importance for producing the highly-enantioseparation ability, by which chiral aromatics can be enantioselectively encapsulated by specific π-π and/or hydrophobic interactions.

Effects of octenyl succinylation on the properties of starches with distinct crystalline types and their Pickering emulsions

Effects of octenylsuccinic anhydride (OSA) esterification on the morphology, crystalline structure, and emulsifying properties of three representative starches with different crystalline types, namely waxy corn starch (A-type), potato starch (B-type), and pea starch (C-type) were investigated. XRD patterns testified OSA substitution occurred principally in the amorphous region without affecting the crystalline patterns, whereas SEM verified esterification was mainly a surface phenomenon. However, OSA esterification caused a decrease in the peak intensity and area of small-angle X-ray scattering profiles, indicating the semi-crystalline lamellae ordering was impeded to a certain extent. Compared with A- and C-type starches, B-type starch had a stronger affinity for OSA, as manifested by its higher degree of substitution (DS), graver surface detriment, and depressed order of semi-crystalline lamellae. The emulsifying properties of all starches were pronouncedly improved by OSA modification, especially for A-type starch even with comparatively lower DS. Pickering emulsion stabilized by OSA-modified A-type starch (A-OSAS) with smaller droplet size and more uniform droplet size distribution exhibited more splendiferous stability relative to the other two modified starches. Moreover, rheological tests revealed A-OSAS possessed the highest apparent viscosity and storage modulus (G'), insinuating strong intermolecular interactions between starch granules at the interface and/or in the continuous phase.

Silane treated starch dispersed PBAT/PHBV-based composites: Improved barrier performance for single-use plastic alternatives

The objective of this study is to include 5 wt% silane-treated starch (S-t-Starch) into biodegradable flexible poly(butylene adipate-co-terephthalate) (PBAT)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend matrix, which can facilitate superior barrier and balanced mechanical properties. With the intension of improving compatibilization between matrix and filler, starch (biological macromolecule) was efficiently treated with 15 wt% of 3-glycidoxypropyl trimethoxy silane (GPTMS), a coupling agent. Various analyses such as barrier, mechanical, thermal, surface morphology and rheological were performed using cast extruded PBAT/PHBV-based composite films. Comprehensive characterizations suggested that cast extruded PBAT/PHBV with 5 wt% S-t-Starch composites exhibited 91 and 82 % improvement in oxygen and water vapor barrier, respectively, compared to PBAT film. The increment in % crystallinity (as supported by DSC analysis) of PBAT/PHBV/5%S-t-Starch composite due to the silane component was one of the reasons for barrier improvement. The other reason was the improved interfacial adhesion between matrix and S-t-Starch particles (as supported by SEM analysis), which restricted the mobility of the polymer chains. The elongation at break (%EB) of the cast extruded PBAT/PHBV/5%Starch film was slightly improved from 536 to 542 % after silane treatment. Hence, the developed polymer composite in this research work can contribute to flexible packaging applications that require improved barrier properties.

Starch Nanoparticles: Preparation, Properties and Applications

Starch as a natural polymer is abundant and widely used in various industries around the world. In general, the preparation methods for starch nanoparticles (SNPs) can be classified into 'top-down' and 'bottom-up' methods. SNPs can be produced in smaller sizes and used to improve the functional properties of starch. Thus, they are considered for the various opportunities to improve the quality of product development with starch. This literature study presents information and reviews regarding SNPs, their general preparation methods, characteristics of the resulting SNPs and their applications, especially in food systems, such as Pickering emulsion, bioplastic filler, antimicrobial agent, fat replacer and encapsulating agent. The aspects related to the properties of SNPs and information on the extent of their utilisation are reviewed in this study. The findings can be utilised and encouraged by other researchers to develop and expand the applications of SNPs.

Immobilization of α-amylase from Aspergillus fumigatus using adsorption method onto zeolite

The stability of enzymes which play an important role as biocatalysts in many industrial processes is a persistent challenge with significant impact on production costs. In this study, improvement of the stability of α-amylase obtained from Aspergillus fumigatus was attempted by immobilizing the enzyme onto zeolite using adsorption method. For purification, the isolated enzyme was subsequently subjected to centrifugation, fractionation, and dialysis. The native enzyme was found to have an optimum temperature of 50 °C, while the immobilized enzyme, the optimum temperature of 60 °C was found. The immobilized enzyme was found to have the K M value of 11.685 ± 0.183 mg mL−1 substrate and V max of 1.406 ± 0.049 μmol mL−1 min−1, while for the native enzyme, the K M value of 3.478 ± 0.271 mg mL−1 substrate and the V max of 2.211 ± 0.096 μmol mL−1 min−1 were obtained. Furthermore, the immobilized enzyme displays the ΔGi of 106.76 ± 0.00 kJ mol−1 and t ½ of 90.40 ± 0.00 min, while the native enzyme, the values obtained are ΔGi of 104.35 ± 1.09 kJ mol−1 and t½ of 38.75 ± 1.53 min. As can be seen, the t ½ of immobilized enzyme is 2.38 times longer than that of native enzyme, justifying a very significant stability enhancement of the enzyme as a result of. Another important finding is that the immobilized α-amylase enzyme was able to retain its activity as high as 13.80 ± 1.19% activity after five cycles, indicating its potential for industrial use.

Efficient Accumulation of Amylopectin and Its Molecular Mechanism in the Submerged Duckweed Mutant

Large-scale use of fossil fuels has brought about increasingly serious problems of environmental pollution, development and utilization of renewable energy is one of the effective solutions. Duckweed has the advantages of fast growth, high starch content and no occupation of arable land, so it is a promising starchy energy plant. A new submerged duckweed mutant (sub-1) with abundant starch accumulation was obtained, whose content of amylopectin accounts for 84.04% of the starch granules. Compared with the wild type (Lemna aequinoctialis), the branching degree of starch in sub-1 mutant was significantly increased by 19.6%. Chain length DP 6-12, DP 25-36 and DP > 36 of amylopectin significantly decreased, while chain length DP 13-24 significantly increased. Average chain length of wild-type and sub-1 mutant starches were greater than DP 22. Moreover, the crystal structure and physical properties of starch have changed markedly in sub-1 mutant. For example, the starch crystallinity of sub-1 mutant was only 8.94%, while that of wild-type was 22.3%. Compared with wild type, water solubility of starch was significantly reduced by 29.42%, whereas swelling power significantly increased by 97.07% in sub-1 mutant. In order to further analyze the molecular mechanism of efficient accumulation of amylopectin in sub-1 mutant, metabolome and transcriptome were performed. The results showed that glucose accumulated in sub-1 mutant, then degradation of starch to glucose mainly depends on α-amylase. At night, the down-regulated β-amylase gene resulted in the inhibition of starch degradation. The starch and sucrose metabolism pathways were significantly enriched. Up-regulated expression of SUS, AGPase2, AGPase3, PYG, GPI and GYS provide sufficient substrate for starch synthesis in sub-1 mutant. From the 0H to 16H light treatment, granule-bound starch synthase (GBSS1) gene was inhibited, on the contrary, the starch branching enzyme (SBE) gene was induced. Differential expression of GBSS1 and SBE may be an important reason for the decrease ratio of amylose/amylopectin in sub-1 mutant. Taken together, our results indicated that the sub-1 mutant can accumulate the amylopectin efficiently, potentially through altering the differential expression of AGPase, GBSS1, SBE, and BAM. This study also provides theoretical guidance for creating crop germplasm with high amylopectin by means of synthetic biology in the future.

Detecting variation in starch granule size and morphology by high-throughput microscopy and flow cytometry

Starch forms semi-crystalline, water-insoluble granules, the size and morphology of which vary according to biological origin. These traits, together with polymer composition and structure, determine the physicochemical properties of starch. However, screening methods to identify differences in starch granule size and shape are lacking. Here, we present two approaches for high-throughput starch granule extraction and size determination using flow cytometry and automated, high-throughput light microscopy. We evaluated the practicality of both methods using starch from different species and tissues and demonstrated their effectiveness by screening for induced variation in starch extracted from over 10,000 barley lines, yielding four with heritable changes in the ratio of large A-granules to small B-granules. Analysis of Arabidopsis lines altered in starch biosynthesis further demonstrates the applicability of these approaches. Identifying variation in starch granule size and shape will enable identification of trait-controlling genes for developing crops with desired properties, and could help optimise starch processing.

A Novel Starch from Talisia floresii Standl Seeds: Characterization of Its Physicochemical, Structural and Thermal Properties

Colok seed (Talisia floresii Standl) represents 80% of the total fruit weight and is obtained from trees that grow mainly in Yucatan Peninsula. The aim of this work was the physicochemical characterization from colok starch seeds as an alternative to conventional sources and to identify its characteristics for potential applications in different industrial sectors. Starch yield was 42.1% with low levels of lipids, ashes and fibers. The amylose content was 33.6 ± 1.15%. The gelatinization temperature was 85 ± 0.25 °C. Color analysis resulted in a starch with an intermediate luminosity, reflecting a dark color. Finally, in morphology, starch granule exhibited an average size of 18.7 μm, spherical, uniform and without fractures. Overall results demonstrated that isolated colok starch can be used in food products that require high processing temperatures, such as sauces, cookies, noodles, bread and food packages.

From trash to treasure: review on upcycling of fruit and vegetable wastes into starch based bioplastics

Growing public concern toward environmental sustainability is currently motivating a paradigm shift toward designing easily degradable plastics that can replace conventional synthetic plastics. The massive rise in food waste generation has led to an increased burden on landfills, thereby resulting in the higher emission of greenhouse gases. Using this food waste to produce bioplastics will benefit not only the environment but also develop a systematic food waste management system. Moreover, bioplastics are preferred due to the use of biomaterials derived from renewable resources. Furthermore, bioplastics degrade faster than conventional synthetic plastics, which take years to degrade. The biodegradation of bioplastics occurs under normal environmental conditions and disintegrates into carbon dioxide, water, biomass, and inorganic compounds without producing hazardous residues. In this review, we will discuss the synthesis of starch based bioplastics using discarded parts of various fruits and vegetables. Furthermore, we will address the importance of various components in the development of starch based bioplastics, such as fillers, plasticizers, and other additives that are essential in providing the bioplastic with different physio-mechanical properties. Therefore, bioplastic production using food waste will pave the way to achieve systematic waste management and environmental sustainability in the near future.

Pasting and Rheological Properties of Starch Paste/Gels in a Sugar-Acid System

This study was to investigate the impact of granule size, amylose content, and starch molecular characteristics on pasting and rheological properties of starch paste/gels in neutral (water) and sugar-acid systems. Normal rice starch (RS), waxy rice starch (WRS), normal tapioca starch (TS), and waxy tapioca starch (WTS) representing small-granule starches and intermediate-granule starches respectively, were used in the study. Impacts of granule size, AM content, and their synergistic effects resulted in different starch susceptibility to acid hydrolysis and interactions between starch and sucrose-water, yielding different paste viscosities in both systems. The high molecular weight (Mw¯) and linearity of amylopectin and amylose molecules increased the consistency of starch pastes. RS produced a stronger and more brittle gel than other starch gels in both neutral and sugar-acid systems. The results indicated the impact of the effect of granule size and amylose content on starch gel behaviors. Properties of waxy starch gels were mainly governed by amylopectin molecular characteristics, especially in the sugar-acid system. Adding sugar and acid had minor impacts on starch gel behaviors in the linear viscoelastic (LVE) region but were most evident in the nonlinear response regime of starch gels as shown in the Lissajous curves at large oscillatory strain.