Occurrence of phthalates in surface runoff, untreated and treated wastewater and fate during wastewater treatment

Contamination level of four priority phthalates in North Indian wastewater treatment plants and their fate in sequencing batch reactor systems

The contamination level of four phthalates in untreated and treated wastewater of fifteen wastewater treatment plants (WWTPs) and their fate in a full scale sequencing batch reactor (SBR) based WWTP was evaluated in this study. The four phthalates were diethyl phthalate (DEP), dibutyl phthalate (DBP), benzylbutyl phthalate (BBP) and diethylhexyl phthalate (DEHP). All compounds were present in untreated wastewater with DEHP being present in the highest mean concentration of 28.4 ± 5.3 μg L(-1). The concentration was in the range of 7.3 μg L(-1) (BBP) to 28.4 μg L(-1) (DEHP) in untreated wastewater and 1.3 μg L(-1) (DBP) to 2.6 μg L(-1) (DEHP) in treated wastewater. The nutrient removal process and advance tertiary treatment based WWTPs showed the highest phthalate removal efficiencies of 87% and 93%, respectively. The correlation between phthalate removal and conventional performance of WWTPs was positive. Fate analysis of these phthalates in a SBR based WWTP showed that total removal of the sum of phthalates in a primary settling tank and SBR was 84% out of which 55% is removed by biodegradation and 29% was removed by sorption to primary and secondary sludge. The percentage removal of four phthalates in primary settling tanks was 18%. Comparison of the diluted effluent DEHP concentration with its environmental quality standards showed that the dilution in an effluent receiving water body can reduce the DEHP emissions to acceptable values.

Comparative study of diethyl phthalate degradation by UV/H2O2 and UV/TiO2: kinetics, mechanism, and effects of operational parameters

The photodegradation of diethyl phthalate (DEP) by UV/H2O2 and UV/TiO2 is studied. The DEP degradation kinetics and multiple crucial factors effecting the clearance of DEP are investigated, including initial DEP concentration ([DEP]0), initial pH values (pH0), UV light intensity, anions (Cl(-), NO(3-), SO4 (2-), HCO3 (-), and CO3 (2-)), cations (Mg(2+), Ca(2+), Mn(2+), and Fe(3+)), and humic acid (HA). Total organic carbon (TOC) removal is tested by two treatments. And, cytotoxicity evolution of DEP degradation intermediates is detected. The relationship between molar ratio ([H2O2]/[DEP] or [TiO2]/[DEP]) and degradation kinetic constant (K) is also studied. And, the cytotoxicity tests of DEP and its degradation intermediates in UV/H2O2 and UV/TiO2 treatments are researched. The DEP removal efficiency of UV/H2O2 treatment is higher than UV/TiO2 treatment. The DEP degradation fitted a pseudo-first-order kinetic pattern under experimental conditions. The K linearly related with molar ratio in UV/H2O2 treatment while nature exponential relationship is observed in the case of UV/TiO2. However, K fitted corresponding trends better in H2O2 treatment than in TiO2 treatment. The Cl(-) is in favor of the DEP degradation in UV/H2O2 treatment; in contrast, it is disadvantageous to the DEP degradation in UV/TiO2 treatment. Other anions are all disadvantageous to the DEP degradation in two treatments. Fe(3+) promotes the degradation rates significantly. And, all other cations in question inhibit the degradation of DEP. HA hinders DEP degradation in two treatments. The intermediates of DEP degradation in UV/TiO2 treatment are less toxic to biological cell than that in UV/H2O2 treatment.

Phthalate esters in the environment: A critical review of their occurrence, biodegradation, and removal during wastewater treatment processes

Phthalate esters are one of the most frequently detected persistent organic pollutants in the environment. A better understanding of their occurrence and degradation in the environment and during wastewater treatment processes will facilitate the development of strategies to reduce these pollutants and to bioremediate contaminated freshwater and soil. Phthalate esters occur at measurable levels in different environments worldwide. For example, the concentrations of dimethyl phthalate (DMP) in atmospheric particulate matter, fresh water and sediments, soil, and landfills are N.D.-10.4 ng/m(3), N.D.-31.7 μg/L, N.D.-316 μg/kg dry weight, and N.D.-200 μg/kg dry weight, N.D.-43.27 μg/L, respectively. Bis(2-ethylhexyl) phthalate (DEHP) and di-n-butyl phthalate (DBP) are primary phthalate ester pollutants. Urbanization has increased the discharge of phthalate esters to atmospheric and aquatic environments, and the use of agricultural plastics has exacerbated soil contamination by phthalate esters in rural areas. Aerobic biodegradation is the primary manner of phthalate ester mineralization in the environment, and this process has been widely studied. Phthalate esters can be removed during wastewater treatment processes. The combination of different wastewater treatment technologies showed greater efficiency in the removal of phthalate esters than individual treatment steps, such as the combination of anaerobic wastewater treatment with a membrane bioreactor would increase the efficiency of phthalate ester removal from 65%-71% to 95%-97%. This review provides a useful framework to identify future research objectives to achieve the mineralization and elimination of phthalate esters in the environment.

Removal of phthalates and pharmaceuticals from municipal wastewater by graphene adsorption process

In this work graphene was used for evaluation of its adsorption behavior and performance in removing phthalate esters and pharmaceuticals in municipal wastewater. Di-n-butyl phthalate (DnBP), di-(2-ethylhexyl) phthalate (DEHP), acetaminophen (ACE), caffeine (CAF), cephalexin (CLX), and sulfamethoxazole (SMX) were emerging contaminants (ECs) with detection frequencies over 92% in a one-year monitoring of the occurrence of ECs in influent samples of a sewage treatment plant in Taiwan. Thus, these ECs were selected as the target contaminants for removal by graphene adsorption process. Experimental results showed that the adsorption isotherm data were fitted well to Langmuir model equation. It was also found that the adsorption process obeyed the pseudo-second-order kinetics. A graphene dosage of 0.1 g/L and adsorption time of 12 h were found to be the optimal operating conditions for the ECs of concern in model solutions in a preliminary study. By using the determined optimal operating conditions for removal of such ECs in actual municipal wastewater, removal efficiencies for various ECs were obtained and given as follows: (1) DnBP, 89%, (2) DEHP, 86%, (3) ACE, 43%, (4) CAF, 84%, (5) CLX, 81%, and (6) SMX, 34%.

Occurrence and fate of endocrine disrupting chemicals in ASP based sewage treatment plant in Hardwar

The occurrence of emerging contaminants such as endocrine disrupting chemicals (EDCs) in our water resources is of prime concern. With this context, fate and seasonal variation of six EDCs (testosterone, T; progesterone, P; diethyl phthalate, DEP; dibutyl phthalate, DBP; propyl-paraben, PP and butyl-paraben, BP) were assessed throughout the year, i.e. in rainy, winter, spring and summer seasons in the raw, treated wastewater and activated sludge in an activated sludge process (ASP) based sewage treatment plant (STP) located in Haridwar, India. Qualitative and quantitative measurements were performed by gas chromatography-mass spectrometry (GC-MS) analysis. Results indicate that in summer, the examined STP could effectively remove 82.9% of T, 86.4% of P, 95.5% of DEP, 92.4% of DBP, 91.5% of PP, and 89.9% of BP from the wastewater. Among the EDCs considered, higher removal efficiencies were achieved for phthalates in the summer season. GC-MS analysis showed that a small fraction of EDCs was sorbed on the solid fraction of activated sludge. Scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier transformation infrared spectroscopy analysis were also performed to investigate the occurrence of EDCs in biomass samples. Results of this study also demonstrated that removal efficiency, assessed in terms of physicochemical and microbiological parameters, was maximum in summer and reached minimum in rainy season.

Plasticizer endocrine disruption: Highlighting developmental and reproductive effects in mammals and non-mammalian aquatic species

Due to their versatility, robustness, and low production costs, plastics are used in a wide variety of applications. Plasticizers are mixed with polymers to increase flexibility of plastics. However, plasticizers are not covalently bound to plastics, and thus leach from products into the environment. Several studies have reported that two common plasticizers, bisphenol A (BPA) and phthalates, induce adverse health effects in vertebrates; however few studies have addressed their toxicity to non-mammalian species. The aim of this review is to compare the effects of plasticizers in animals, with a focus on aquatic species. In summary, we identified three main chains of events that occur in animals exposed to BPA and phthalates. Firstly, plasticizers affect development by altering both the thyroid hormone and growth hormone axes. Secondly, these chemicals interfere with reproduction by decreasing cholesterol transport through the mitochondrial membrane, leading to reduced steroidogenesis. Lastly, exposure to plasticizers leads to the activation of peroxisome proliferator-activated receptors, the increase of fatty acid oxidation, and the reduction in the ability to cope with the augmented oxidative stress leading to reproductive organ malformations, reproductive defects, and decreased fertility.

Sensitive liquid chromatography-tandem mass spectrometry method for the simultaneous determination of benzyl butyl phthalate and its metabolites, monobenzyl phthalate and monobutyl phthalate, in rat plasma, urine, and various tissues collected from a toxicokinetic study

This study describes the development of a sensitive liquid chromatography-electrospray-tandem mass spectrometry method for the simultaneous determination of benzyl butyl phthalate (BBP) and its major metabolites, monobenzyl phthalate (MBzP) and monobutyl phthalate (MBuP), in rat plasma, urine, and 10 different tissues. The method was validated with regard to the specificity, linearity, precision, accuracy, lower limit of quantification (LLOQ), recovery, and stability by using the matrix-matched quality control samples. The assay achieved LLOQ of 1 ng/ml of BBP for plasma and urine, 4 ng/g for kidney and liver, 10 ng/g for fat, and 20 ng/g for all other tissues. For MBzP and MBuP, the assay achieved LLOQ of 5 ng/ml for plasma and urine, 10 ng/g for fat, and 20 ng/g for all other tissues. The disposition of BBP was characterized by a large volume of distribution (71.1-82.9 l/kg) and a high clearance (838.7-871.0 ml/min/kg). It was extensively metabolized to MBzP and MBuP, with their levels consistently exceeding the BBP levels. The distribution of BBP, MBzP, and MBuP to tissues of kidney, liver, stomach, small intestine, large intestine, spleen, brain, testis, thyroid, and fat was determined under steady-state conditions. For BBP, the steady-state tissue-to-plasma partition coefficient (K p) was the highest for fat (25.0) followed by small intestine (2.6), thyroid (2.0), and stomach (1.1). In contrast, for MBzP and MBuP, it was the highest for kidney (2.0 and 4.3, respectively) and liver (4.3 and 2.1, respectively) but was less than unity for all other tissues. The developed assay method and findings of this study may be useful to evaluate the exposure and toxic potential of BBP and its metabolites in risk assessment.

Environmental occurrence and biota concentration of phthalate esters in Epe and Lagos Lagoons, Nigeria

The high global occurrence of phthalates in different environmental matrixes has resulted in the detection of their metabolites in human urine, blood, and breast milk, indicating a widespread human exposure. In addition, the notorious endocrine disrupting effects of phthalates have shown that they mimic or antagonize the action of endogenous hormones, consequently producing adverse effects on reproduction, growth and development. Herein, we have studied the occurrence of phthalate esters (PEs) in water, sediment and biota of two lagoons (Epe and Lagos) in Nigeria. Two fish species (Tilapia guineensis, and Chrysichthys nigrodigitatus) and a crustacean (the African river prawn--Macrobrachium vollenhovenii) were analyzed for PEs levels using a HPLC method and the derived values were used for calculating bioconcentration factor (BCF), biota-sediment accumulation factor (BSAF) and phthalate pollution index (PPI) in the biota and environment. We observed that the growth and health condition of the fish species were normal with a k-factor of >1. Sediment PE levels were compared with water, at both lagoons showing concentration pattern that is characterized as DEHP = DEP > DBP. We observed that DBP was the predominant compound in T. guineensis, C. nigrodigitatus and African prawn, at both lagoons, showing organ-specific differences in bioconcentration (BCF and BSAF) patterns in the fish species. While there were no observed consistency in the pattern of PE concentration in fish organs, elevated DBP levels in different fish organs may be related to fish habitat and degradation level of phthalates. Low concentration of DEHP, compared with DBP and DEP, was measured in fish organs and whole prawn body. The BSAF values for DEHP were lowest, and highest for DBP for all species at both lagoons, and DEHP easily accumulated more in the sediment (sediment PPI = 0.28 and 0.16 for Epe and Lagos lagoon, respectively). Overall, our findings suggest a broader environmental and human health implication of the high PE levels in these lagoons since they represent significant sources of aquatic food resources for the neighboring communities.

Catalysed ozonation for removal of an endocrine-disrupting compound using the O3/Fenton reagents system

Aqueous solutions of diethyl phthalate (DEP) were oxidized by using ozone combined with Fenton reagents. The effects of operating parameters such as initial pH; initial concentration of DEP, H2O2 and Fe2+; [H2O2]0/[Fe2+]0 ratio and O3 dosage on the degradation rates of DEP were investigated. The results showed that DEP degradation is strongly dependant on the pH; initial concentrations of the phthalate, H2O2 and Fe2+; [H2O2]0/[Fe2+]0 ratio and O3 dosage. The addition of H2O2 and Fe2+ ions was effective to achieve almost 98% degradation of 200 mg L(-1) of DEP in about 40 min using a dose of O3=45 g m(-3) NTP; [H2O2]0=2.5×10(-2) mol L(-1) and [Fe(II)]0=5×10(-3) mol L(-1), as compared to over 60 min by using O3 and Fenton processes applied separately. DEP degradation followed apparent pseudo-first-order kinetics under ozonation, Fenton's reagents oxidation and the combined ozonation/Fenton reagents oxidation process. The overall reaction rates were significantly enhanced in the O3/Fe2+/H2O2 oxidation system, and allows achieving 100% degradation of DEP (100 mg L(-1)) in 30 min of reaction time. The notable decrease in DEP removal rate observed in the presence of a radical scavenger indicates that there was an obvious synergetic effect in the combined ozonation/Fenton reagent process most likely because ozonation could accelerate Fenton reagents to generate hydroxyl radical HO•. Thus, the reaction between DEP and HO• proceeds mainly in the bulk of the aqueous phase. Under optimal conditions, the O3/Fe2+/H2O2 system oxidation was the most effective in DEP removal in water.

Methodologies for pre-validation of biofilters and wetlands for stormwater treatment

BACKGROUND

Water Sensitive Urban Design (WSUD) systems are frequently used as part of a stormwater harvesting treatment trains (e.g. biofilters (bio-retentions and rain-gardens) and wetlands). However, validation frameworks for such systems do not exist, limiting their adoption for end-uses such as drinking water. The first stage in the validation framework is pre-validation, which prepares information for further validation monitoring.

OBJECTIVES

A pre-validation roadmap, consisting of five steps, is suggested in this paper. Detailed methods for investigating target micropollutants in stormwater, and determining challenge conditions for biofilters and wetlands, are provided.

METHODS

A literature review was undertaken to identify and quantify micropollutants in stormwater. MUSIC V5.1 was utilized to simulate the behaviour of the systems based on 30-year rainfall data in three distinct climate zones; outputs were evaluated to identify the threshold of operational variables, including length of dry periods (LDPs) and volume of water treated per event.

RESULTS

The paper highlights that a number of micropollutants were found in stormwater at levels above various worldwide drinking water guidelines (eight pesticides, benzene, benzo(a)pyrene, pentachlorophenol, di-(2-ethylhexyl)-phthalate and a total of polychlorinated biphenyls). The 95th percentile LDPs was exponentially related to system design area while the 5th percentile length of dry periods remained within short durations (i.e. 2-8 hours). 95th percentile volume of water treated per event was exponentially related to system design area as a percentage of an impervious catchment area.

CONCLUSIONS

The out-comings of this study show that pre-validation could be completed through a roadmap consisting of a series of steps; this will help in the validation of stormwater treatment systems.

Study of moving bed biofilm reactor in diethyl phthalate and diallyl phthalate removal from synthetic wastewater

Phthalic acid esters have received significant attention over the last few years since they are considered as priority pollutants. In this study, effects of different operation conditions including hydraulic retention time, phthalates loading rates and aeration rate on process performance of moving bed biofilm reactor (MBBR) for removing diethyl phthalate (DEP) and diallyl phthalate (DAP) from synthetic wastewater was evaluated. In optimum conditions, 94.96% and 93.85% removal efficiency were achieved for DEP and DAP, respectively. Moreover, MBBR achieved to remove more than 92% of COD for both phthalates. The results showed that DEP had a higher biodegradation rate compared to DAP, according to the selected parameters such as half saturation constant, overall reaction rate and maximum specific growth rate. The Grau second order model found as the best model for predicting MBBR performance due to its high correlation coefficients and more conformity of its kinetic coefficients to the results.

Occurrence of emerging and priority pollutants in municipal reverse osmosis concentrates

This paper aimed to investigate the occurrence and concentrations of emerging and priority pollutants in the municipal reverse osmosis concentrate (ROC) using liquid-liquid extraction (LLE) followed by gas chromatography-mass spectrometry. The results indicated that there were varieties of pollutants, including chlorinated organic compounds, polycyclic aromatic hydrocarbons (PAHs), phthalate esters (PAEs), pharmaceutical and personal care products (PPCPs), herbicides and flame retardants, in the ROC. Most of the pollutants were quantified, and the performance of the analytical method was explored. For most of the target compounds, the mean recoveries at two concentration levels (0.17 μg L(-1) and 1.67 μg L(-1)) ranged from 70% to 130% and the relative standard deviation (RSD) values were less than 20%, indicating excellent accuracy and precision. Typical concentrations of most of the pollutants were as low as tens or hundreds of ng L(-1), whereas others were as high as several μg L(-1) (such as, the concentration of 2-chloroethyl ether was 1.42 μg L(-1), of caffeine was 3.73 μg L(-1), and of benzyl butyl phthalate was 4.90 μg L(-1)).

Occurrence, Species, and Organ Differences in Bioaccumulation Patterns of Phthalate Esters in Municipal Domestic Water Supply Lakes in Ibadan, Nigeria

The occurrence of phthalate esters (PE) was examined in biota, ambient water, and sediments of two man-made lakes (Asejire and Eleyele) in southwestern Nigeria. Five fish species (Tilapia zillii, Hepsetus odoe, Parachanna obscura, Chrysichthys nigrodigitatus, and Mormyrus rume) were analyzed for PE levels and used for calculating bioconcentration factors (BCF) and biota-sediment accumulation factors (BSAF). In addition, measured PE levels were thereafter used to calculate the phthalate pollution index (PPI) in biota and the environment. At both lakes, all sampled species had k-factor > 1, showing apparently normal growth and health condition. Higher PE levels were found in sediments compared with water at both lakes, with a pattern showing that di(2-ethylhexyl) phthalate (DEHP) was predominant PE. While there were no unique patterns of PE concentrations in both lakes, differences were observed in organ concentration patterns that were evident at both lakes. For T. zillii, the BSAF was higher for dibutyl phthalate (DBP) compared to diethyl phthalate (DEP) and lowest for DEHP. The concentration pattern demonstrated that DBP concentrated more in gills (BCF: 6.7), while DEHP concentrated more in liver (BCF: 15.2) of T. zillii at Asejire. At Eleyele, T. zillii liver and gills concentrated less DEP and DEHP. The PPI value was significantly higher in sediment with respective values of 0.27 and 0.44 at Asejire and Eleyele lakes compared with water with respective values of 0.1 and 0.18 at Asejire and Eleyele lakes. Overall, our findings suggest a broader environmental and human health implication of high PE levels in these lakes, since they provide vast water volumes that are used for municipal domestic water supply. Further, these lakes support intense artisanal fisheries, representing significant sources of aquatic food resources for neighboring communities.

BPA and phthalate fate in a sewage network and an elementary river of France. Influence of hydroclimatic conditions

Our purpose was to characterize the fate of bisphenol A (BPA) and phthalate contamination simultaneously in a sewage network and a watercourse, in relation with hydrological and climatic conditions. An elementary catchment of the Seine basin, receiving effluents from a wastewater treatment plant (WWTP), was chosen because of its basic hydrological features. BPA and DEHP concentrations in the WWTP inputs were 4 and 33 μg L(-1) whereas in the outputs, they were only 0.4 and 2 μg L(-1), respectively. Contaminant ratios in the suspended sediment phase of the WWTP inputs ranged from 0.5% to 88%, related to their molecular properties. BPA and phthalates were effectively removed in the WWTP (>90% for both compounds), by degradation and decantation. Upstream of the discharge, river concentrations ranged from 0.002 to 0.175 μg L(-1) for BPA and from 0.16 to 0.90 μg L(-1) for DEHP. Downstream from the WWTP outputs, concentrations ranged from 0.11 to 0.79 μg L(-1) for BPA and from 0.31 μg L(-1) to 1.7 μg L(-1) for DEHP: the WWTP discharge led to contaminant increases of 3.8 and 2 times, respectively. Far downstream, concentrations were lower ranging from 0.11 to 0.19 μg L(-1) for BPA and from 0.36 μg L(-1) to 1.1 μg L(-1) for DEHP. BPA and phthalates displayed opposite seasonal variations with a decrease for the first one and an increase for the second one during summer. BPA contamination in the Charmoise river derived mainly from the WWTP, while phthalate contamination was attributed to both WWTP discharges and diffuse sources such as atmospheric bulk deposition.

Occurrence, fate and effects of Di (2-ethylhexyl) Phthalate in wastewater treatment plants: a review

Phthalates, such as Di (2-ethylhexyl) Phthalate (DEHP) are compounds extensively used as plasticizer for long time around the world. Due to the extensive usage, DEHP is found in many surface waters (0.013-18.5 μg/L), wastewaters (0.716-122 μg/L), landfill leachate (88-460 μg/L), sludge (12-1250 mg/kg), soil (2-10 mg/kg). DEHP is persistent in the environment and the toxicity of the byproducts resulting from the degradation of DEHP sometime exacerbates the parent compound toxicity. Water/Wastewater treatment processes might play a key role in delivering safe, reliable supplies of water to households, industry and in safeguarding the quality of water in rivers, lakes and aquifers. This review addresses state of knowledge concerning the worldwide production, occurrence, fate and effects of DEHP in the environment. Moreover, the fate and behavior of DEHP in various treatment processes, including biological, physicochemical and advanced processes are reviewed and comparison (qualitative and quantitative) has been done between the processes. The trends and perspectives for treatment of wastewaters contaminated by DEHP are also analyzed in this review.

Monitoring and removal of residual phthalate esters and pharmaceuticals in the drinking water of Kaohsiung City, Taiwan

This study monitored the occurrence and removal efficiencies of 8 phthalate esters (PAEs) and 13 pharmaceuticals present in the drinking water of Kaohsiung City, Taiwan. The simultaneous electrocoagulation and electrofiltration (EC/EF) process was used to remove the contaminants. To this end, a monitoring program was conducted and a novel laboratory-prepared tubular carbon nanofiber/carbon/alumina composite membrane (TCCACM) was incorporated into the EC/EF treatment module (collectively designated as "TCCACM-EC/EF treatment module") to remove the abovementioned compounds from water samples. The monitoring results showed that the concentrations of PAEs were lower in water samples from drinking fountains as compared with tap water samples. No significant differences were found between the concentrations of pharmaceuticals in the two types of water samples. Under optimal operating conditions, the TCCACM-EC/EF treatment module yielded the lowest residual concentrations, ranging from not detected (ND) to 52ng/L for PAEs and pharmaceuticals of concern in the tap water samples. Moreover, the performance of the TCCACM-EC/EF treatment module is comparable with a series of treatment units employed for the drinking fountain water treatment system. The relevant removal mechanisms involved in the TCCACM-EC/EF treatment module were also discussed in this work.

Sorption and degradation of petroleum hydrocarbons, polycyclic aromatic hydrocarbons, alkylphenols, bisphenol A and phthalates in landfill leachate using sand, activated carbon and peat filters

Landfill leachates are repeatedly found contaminated with organic pollutants, such as alkylphenols (APs), phthalates and polycyclic aromatic hydrocarbons (PAHs) at levels exceeding water quality standards. It has been shown that these pollutants may be present in the colloidal and truly dissolved phase in contaminated water, making particle separation an inefficient removal method. The aim of this study was to investigate sorption and degradation of petroleum hydrocarbons (PHCs), selected APs, bisphenol A (BPA), phthalates and PAHs from landfill leachate using sand, granulated activated carbon (GAC) and peat moss filters. A pilot plant was installed at an inactive landfill with mixed industrial and household waste and samples were collected before and after each filter during two years. Leachate pre-treated in oil separator and sedimentation pond failed to meet water quality standards in most samples and little improvement was seen after the sand filter. These techniques are based on particle removal, whereas the analysed pollutants are found, to varying degrees, bound to colloids or dissolved. However, even highly hydrophobic compounds expected to be particle-bound, such as the PHCs and high-molecular weight PAHs, were poorly removed in the sand filter. The APs and BPA were completely removed by the GAC filter, while mass balance calculations indicate that 50-80% of the investigated phenols were removed in the peat filter. Results suggest possible AP degradation in peat filters. No evidence of phthalate degradation in the landfill, pond or the filters was found. The PHCs were completely removed in 50% and 35% of the measured occasions in the GAC and peat filters, respectively. The opposite trend was seen for removal of PAHs in GAC (50%) and peat (63%). Oxygenated PAHs with high toxicity were found in the leachates but not in the pond sediment. These compounds are likely formed in the pond water, which is alarming because sedimentation ponds are commonly used treatment techniques. The oxy-PAHs were effectively removed in the GAC, and especially the peat filter. It was hypothesized that dissolved compounds would adsorb equally well to the peat and GAC filters. This was not completely supported as the GAC filter was in general more efficient than peat.

Di-n-butyl phthalate causes estrogenic effects in adult male Murray rainbowfish (Melanotaenia fluviatilis)

Phthalic acid esters (PAEs) are a class of synthetic industrial chemicals commonly found in the aquatic environment worldwide. PAEs have been recognised as anti-androgens in male mammals but little is known about their endocrine disrupting effects in fish. This study investigated the effects of 7-day exposures to nominal (measured) concentrations of 125 (62), 250 (140), 500 (230) and 1,000 (383) μg/L of di-n-butyl phthalate (DnBP) on the biomarkers of reproduction in adult male Murray River rainbowfish (Melanotaenia fluviatilis) using molecular, biochemical and histological endpoints. None of the tested concentrations of DnBP had any effect on survival or the vital body indices of the fish. The sizes of spermatogonia, Type A and B spermatocytes and spermatids were significantly smaller relative to the controls after treatment with DnBP. This was accompanied by a significant increase in the proportion of spermatogonia in fish treated with 250-1,000 μg/L of DnBP in comparison to the unexposed fish. At the end of the exposure period, the expressions of the transcripts for the androgen receptors α and β were significantly elevated in the livers of the fish treated with 500 and 1,000 μg/L of DnBP. In addition, there was also an increase in the circulating concentrations of vitellogenin in the plasma in the higher treatment groups. An induction in the activity of aromatase was noted in the brains of 1,000 μg/L DnBP-treated fish. This was accompanied by an increase in the hepatic expression of the genes (here and later, whenever the phrase gene expression is used as a synonym for gene transcription although it is acknowledged that it is also regulated, e.g., by translation, mRNA stability and protein stability) encoding for the oestrogen receptors α and β and choriogenin L. Collectively, an increase in the proportion of spermatogonia in the testes, the upregulation of the genes for the oestrogen receptors and choriogenin in the liver, an induction in the brain aromatase activity and the increase in the circulating levels of plasma vitellogenin suggest that continuous exposures for 7 days to sub-acute concentrations of DnBP can adversely affect the reproductive health of the male Murray rainbowfish by an estrogenic mode of action.

Flow of sewage sludge-borne phthalate esters (PAEs) from human release to human intake: implication for risk assessment of sludge applied to soil

The wide production and use of phthalate esters (PAEs) in both industry and commercial products lead to their ubiquitous existence in the environment. However, understanding flow and pathway of human exposure to PAEs from sources to receptors is necessary and challenging. In this study, we selected final sewage sludge, an inevitable byproduct of wastewater treatment plants (WWTP), as one type of important carrier/sources of PAEs to clarify the flow of PAEs between human and the environment, e.g. the release by human to sludge and in turn ingestion by human after these sludges were disposed as soil amendment. Twenty-five sludge samples were collected from 25 wastewater treatment plants (WWTPs) in Shanghai, East China. Of all 16 PAE congeners, di(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DnBP) were predominant with mean concentrations of 97.4 and 22.4 μg/g dw, respectively, both locating at the high end of the global range. WWTP treating industrial waster generally contained higher PAEs compared to those treating domestic wastewater, but no positive relationship was found between PAE levels with the percentage of industrial wastewater. Principal component analysis (PCA) showed that similar PAE sources for all WWTPs in Shanghai with three exceptions, in which specific PAE products were made. The annual mass loadings via sludge of DEHP, DnBP, and Σ16PAEs were 31.4, 7.44, and 39.6 tons in Shanghai and 1042, 247, and 1314 tons in China, respectively, only accounting for 0.09% of the total consumption of PAEs in China. If this sludge is applied in soil, human will take 16.4 and 3.8 μg/kg bw for DEHP and DnBP every day, respectively, via dietary and soil ingestion, which were lower than the toxicological safety parameters. To the best of our knowledge, this is the first report to analyze the flow of sludge-borne PAEs from human release to human intake.

A review on the occurrence of micropollutants in the aquatic environment and their fate and removal during wastewater treatment

Micropollutants are emerging as a new challenge to the scientific community. This review provides a summary of the recent occurrence of micropollutants in the aquatic environment including sewage, surface water, groundwater and drinking water. The discharge of treated effluent from WWTPs is a major pathway for the introduction of micropollutants to surface water. WWTPs act as primary barriers against the spread of micropollutants. WWTP removal efficiency of the selected micropollutants in 14 countries/regions depicts compound-specific variation in removal, ranging from 12.5 to 100%. Advanced treatment processes, such as activated carbon adsorption, advanced oxidation processes, nanofiltration, reverse osmosis, and membrane bioreactors can achieve higher and more consistent micropollutant removal. However, regardless of what technology is employed, the removal of micropollutants depends on physico-chemical properties of micropollutants and treatment conditions. The evaluation of micropollutant removal from municipal wastewater should cover a series of aspects from sources to end uses. After the release of micropollutants, a better understanding and modeling of their fate in surface water is essential for effectively predicting their impacts on the receiving environment.

Occurrence, degradation, and effect of polymer-based materials in the environment

There is now a plethora of polymer-based materials (PBMs) on the market, because of the increasing demand for cheaper consumable goods, and light-weight industrial materials. Each PBM constitutes a mixture of their representative polymer/sand their various chemical additives. The major polymer types are polyethylene, polypropylene,and polyvinyl chloride, with natural rubber and biodegradable polymers becoming increasingly more important. The most important additives are those that are biologically active, because to be effective such chemicals often have properties that make them resistant to photo-degradation and biodegradation. During their lifecycle,PBMs can be released into the environment form a variety of sources. The principal introduction routes being general littering, dumping of unwanted waste materials,migration from landfills and emission during refuse collection. Once in the environment,PBMs are primarily broken down by photo-degradation processes, but due to the complex chemical makeup of PBMs, receiving environments are potentially exposed to a mixture of macro-, meso-, and micro-size polymer fragments, leached additives, and subsequent degradation products. In environments where sunlight is absent (i.e., soils and the deep sea) degradation for most PBMs is minimal .The majority of literature to date that has addressed the environmental contamination or disposition of PBMs has focused on the marine environment. This is because the oceans are identified as the major sink for macro PBMs, where they are known to present a hazard to wildlife via entanglement and ingestion. The published literature has established the occurrence of microplastics in marine environment and beach sediments, but is inadequate as regards contamination of soils and freshwater sediments. The uptake of microplastics for a limited range of aquatic organisms has also been established, but there is a lack of information regarding soil organisms, and the long-term effects of microplastic uptake are also less well understood.There is currently a need to establish appropriate degradation test strategies consistent with realistic environmental conditions, because the complexity of environmental systems is lost when only one process (e.g., hydrolysis) is assessed in isolation. Enhanced methodologies are also needed to evaluate the impact of PBMs to soil and freshwater environments.

Meta-analysis of environmental contamination by phthalates

Phthalate acid esters (PAE), commonly named phthalates, are toxics classified as endocrine-disrupting compounds; they are primarily used as additives to improve the flexibility in polyvinyl chloride. Many studies have reported the occurrence of phthalates in different environmental matrices; however, none of these studies has yet established a complete overview for those compounds in the water cycle within an urban environment. This review summarizes PAE concentrations for all environmental media throughout the water cycle, from atmosphere to receiving waters. Once the occurrences of compounds have been evaluated for each environmental compartment (urban wastewater, wastewater treatment plants, atmosphere, and the natural environment), we reviewed data in order to identify the fate of PAE in the environment and establish whether geographical and historical trends exist. Indeed, geographical and historical trends appear between Europe and other countries such as USA/Canada and China, however they remain location dependent. This study aimed at identifying both the correlations existing between environmental compartments and the processes influencing the fate and transport of these contaminants into the environment. In Europe, the concentrations measured in waterways today represent the background level of contamination, which provides evidence of a past diffuse pollution. In contrast, an increasing trend has actually been observed for developing countries, especially for China.

Di 2-ethylhexylphtalate in the aquatic and terrestrial environment: a critical review

Phthalates are being increasingly used as softeners-plasticizers to improve the plasticity and the flexibility of materials. Amongst the different plasticizers used, more attention is paid to di (2-ethylhexylphtalate) (DEHP), one of the most representative compounds as it exhibits predominant effects on environment and human health. Meanwhile, several questions related to its sources; toxicity, distribution and fate still remain unanswered. Most of the evidence until date suggests that DEHP is an omnipresent compound found in different ecological compartments and its higher hydrophobicity and low volatility have resulted in significant adsorption to solids matrix. In fact, there are important issues to be addressed with regard to the toxicity of this compound in both animals and humans, its behavior in different ecological systems, and the transformation products generated during different biological or advanced chemical treatments. This article presents detailed review of existing treatment schemes, research gaps and future trends related to DEHP.

Sources, fluxes and risk of organic micropollutants to the Cantabrian Sea (Spain)

The sources, distribution and risk of 51 organic micropollutants (OMPs) in the Cantabrian coastal environment (NW Spain) were evaluated. Gas chromatography coupled to tandem mass spectrometry was used to determine polycyclic aromatic hydrocarbons, polychlorinated biphenyls, organochlorinated pesticides, polybrominated diphenyl ethers, phthalates esters, bisphenol A and alkylphenols. 45 OMPs were detected in coastal/estuarine waters. Wastewater treatment plant effluents and emissary discharges were identified as the main sources of contamination. The accumulation of OMPs in sediments and the bioaccumulation in 21 days caged mussels were also assessed. Chemical results were combined with the "Combined Monitoring-based and Modeling-based Priority Setting Scheme" COMMPS procedure for risk assessment analysis. Finally, the chemical status of the different sampling locations was estimated using site risk indexes. Those indexes can be conveniently displayed in quality geographical maps and are considered a valuable tool for the environmental management and risk assessment of the region under study.

Occurrence and removal characteristics of phthalate esters from typical water sources in northeast china

The presence of phthalate esters (PAEs) in the environment has gained a considerable attention due to their potential impacts on public health. This study reports the first data on the occurrence of 15 PAEs in the water near the Mopanshan Reservoir-the new and important water source of Harbin city in Northeast China. As drinking water is a major source for human exposure to PAEs, the fate of target PAEs in the two waterworks (Mopanshan Waterworks and Seven Waterworks) was also analyzed. The results demonstrated that the total concentrations of 15 PAEs in the water near the Mopanshan Reservoir were relatively moderate, ranging from 355.8 to 9226.5 ng/L, with the mean value of 2943.1 ng/L. DBP and DEHP dominated the PAE concentrations, which ranged from 52.5 to 4498.2 ng/L and 128.9 to 6570.9 ng/L, respectively. The occurrence and concentrations of these compounds were heavily spatially dependent. Meanwhile, the results on the waterworks samples suggested no significant differences in PAE levels with the input of the raw waters. Without effective and stable removal of PAEs after the conventional drinking water treatment in the waterworks (25.8% to 76.5%), the risks posed by PAEs through drinking water ingestion were still existing, which should be paid special attention to the source control in the Mopanshan Reservoir and some advanced treatment processes for drinking water supplies.

Removal of diethyl phthalate from water solution by adsorption, photo-oxidation, ozonation and advanced oxidation process (UV/H₂O₂, O₃/H₂O₂ and O₃/activated carbon)

The objective of this work was to compare the effectiveness of conventional technologies (adsorption on activated carbon, AC, and ozonation) and technologies based on advanced oxidation processes, AOPs, (UV/H(2)O(2), O(3)/AC, O(3)/H(2)O(2)) to remove phthalates from aqueous solution (ultrapure water, surface water and wastewater). Diethyl phthalate (DEP) was chosen as a model pollutant because of its high water solubility (1,080 mg/L at 293 K) and toxicity. The activated carbons showed a high adsorption capacity to adsorb DEP in aqueous solution (up to 858 mg/g), besides the adsorption mechanism of DEP on activated carbon is governed by dispersive interactions between π electrons of its aromatic ring with π electrons of the carbon graphene planes. The photodegration process showed that the pH solution does not significantly affect the degradation kinetics of DEP and the first-order kinetic model satisfactorily fitted the experimental data. It was observed that the rate of decomposition of DEP with the O(3)/H(2)O(2) and O(3)/AC systems is faster than that with only O(3). The technologies based on AOPs (UV/H(2)O(2), O(3)/H(2)O(2), O(3)/AC) significantly improve the degradation of DEP compared to conventional technologies (O(3), UV). AC adsorption, UV/H(2)O(2), O(3)/H(2)O(2), and O(3)/AC showed a high yield to remove DEP; however, the disadvantage of AC adsorption is its much longer time to reach maximum removal. The best system to treat water (ultrapure and natural) polluted with DEP is the O(3)/AC one since it achieved the highest DEP degradation and TOC removal, as well as the lower water toxicity.

Solid waste deposits as a significant source of contaminants of emerging concern to the aquatic and terrestrial environments - a developing country case study from Owerri, Nigeria

In developing countries, there are needs for scientific basis to sensitize communities on the problems arising from improper solid waste deposition and the acute and long-term consequences for areas receiving immobilized pollutants. In Nigeria, as in many other African countries, solid waste disposal by way of open dumping has been the only management option for such wastes. Herein, we have highlighted the challenges of solid waste deposit and management in developing countries, focusing on contaminants of emerging concern and leaching into the environment. We have analyzed sediments and run-off water samples from a solid waste dumping site in Owerri, Nigeria for organic load and compared these with data from representative world cities. Learning from previous incidents, we intend to introduce some perspective for awareness of contaminants of emerging concerns such as those with potential endocrine disrupting activities in wildlife and humans. Qualitative and quantitative data obtained by gas chromatography and mass spectrometric analysis (GC-MS) provide an overview on lipophilic and semi-polar substances released from solid waste, accumulated in sediments and transported via leachates. The chromatograms of the full scan analyses of the sediment extracts clearly point to contamination related to heavy oil. The homologous series of n-alkanes with chain lengths ranging between C16 and C30, as well as detected polyaromatic hydrocarbon (PAH) compounds such as anthracene, phenanthrene, fluoranthene and pyrene support the assumption that diesel fuel or high boiling fractions of oil are deposited on the site. Targeted quantitative analysis for selected compounds showed high concentration of substances typically released from man-made products such as plastics, textiles, household and consumer products. Phthalate, an integral component of plastic products, was the dominant compound group in all sediment samples and run-off water samples. Technical nonylphenols (mixture of isomers), metabolites of non-ionic surfactants (nonylphenol-polyethoxylates), UV-filter compound ethyl methoxy cinnamate (EHMC) and bisphenol A (BPA) were particularly determined in the sediment samples at high μg/kg dry weight concentration. Measuring contaminants in such areas will help in increasing governmental, societal and industrial awareness on the extent and seriousness of the contamination both at waste disposal sites and surrounding terrestrial and aquatic environments.

Review on the fate of emerging contaminants during sludge anaerobic digestion

Several research papers have been published during the last years investigating the occurrence, fate and effects of emerging contaminants (ECs) on sludge anaerobic digestion (AD). Literature review revealed that research has been mainly focused on specific groups of compounds (linear alkylbenzene sulphonates, nonylphenol ethoxylates, some pharmaceuticals, estrogens, phthalates), while there are fewer or no data for others (personal care products, perfluorinated compounds, brominated flame retardants, organotins, benzotriazoles, benzothiazoles, nanoparticles). AD operational parameters (sludge residence time, temperature), sludge characteristics (type of sludge, adaptation on the compound), physicochemical properties of ECs and co-metabolic phenomena seem to affect compounds' biodegradation. The use of sludge pretreatment methods does not seem to enhance ECs removal; whereas encouraging results have been reported when AD was combined with other treatment methods. Future efforts should be focused on better understanding of biotransformation processes and sorption phenomena occurred in anaerobic digesters, as well as on identification of (bio)transformation products.

Atmospheric deposition and storm induced runoff of heavy metals from different impermeable urban surfaces

Contaminants deposited on impermeable surfaces migrate to stormwater following rainfall events, but accurately quantifying their spatial and temporal yields useful for mitigation purposes is challenging. To overcome limitations in current sampling methods, a system was developed for rapid quantification of contaminant build-up and wash-off dynamics from different impervious surfaces. Thin boards constructed of concrete and two types of asphalt were deployed at different locations of a large carpark to capture spatially distributed contaminants from dry atmospheric deposition over specified periods of time. Following experimental exposure time, the boards were then placed under a rainfall simulator in the laboratory to generate contaminant runoff under controlled conditions. Single parameter effects including surface roughness and material composition, number of antecedent dry days, rain intensity, and water quality on contaminant build-up and wash-off yields could be investigated. The method was applied to quantify spatial differences in deposition rates of contaminants (TSS, zinc, copper and lead) at two locations varying in their distance to vehicle traffic. Results showed that boards exposed at an unused part of the carpark >50 m from vehicular traffic captured similar amounts of contaminants compared with boards that were exposed directly adjacent to the access route, indicating substantial atmospheric contaminant transport. Furthermore, differences in contaminant accumulation as a function of surface composition were observed. Runoff from asphalt boards yielded higher zinc loads compared with concrete surfaces, whereas runoff from concrete surfaces resulted in higher TSS concentrations attributed to its smoother surfaces. The application of this method enables relationships between individual contaminant behaviour and specific catchment characteristics to be investigated and provides a technique to derive site-specific build-up and wash-off functions required for modelling contaminant loads from impermeable surfaces.

Emerging pollutants in wastewater: a review of the literature

For 20 years, many articles report the presence of new compounds, called "emerging compounds", in wastewater and aquatic environments. The US EPA (United States - Environmental Protection Agency) defines emerging pollutants as new chemicals without regulatory status and which impact on environment and human health are poorly understood. The objective of this work was to identify data on emerging pollutants concentrations in wastewater, in influent and effluent from wastewater treatment plants (WWTPs) and to determine the performance of sewage disposal. We collected 44 publications in our database. We sought especially for data on phthalates, Bisphenol A and pharmaceuticals (including drugs for human health and disinfectants). We gathered concentration data and chose 50 pharmaceutical molecules, six phthalates and Bisphenol A. The concentrations measured in the influent ranged from 0.007 to 56.63 μg per liter and the removal rates ranges from 0% (contrast media) to 97% (psychostimulant). Caffeine is the molecule whose concentration in influent was highest among the molecules investigated (in means 56.63 μg per liter) with a removal rate around 97%, leading to a concentration in the effluent that did not exceed 1.77 μg per liter. The concentrations of ofloxacin were the lowest and varied between 0.007 and 2.275 μg per liter in the influent treatment plant and 0.007 and 0.816 μg per liter in the effluent. Among phthalates, DEHP is the most widely used, and quantified by the authors in wastewater, and the rate of removal of phthalates is greater than 90% for most of the studied compounds. The removal rate for antibiotics is about 50% and 71% for Bisphenol A. Analgesics, anti inflammatories and beta-blockers are the most resistant to treatment (30-40% of removal rate). Some pharmaceutical molecules for which we have not collected many data and which concentrations seem high as Tetracycline, Codeine and contrast products deserve further research.

Ozonation and activated carbon treatment of sewage effluents: removal of endocrine activity and cytotoxicity

Concerns about endocrine disrupting compounds in sewage treatment plant (STP) effluents give rise to the implementation of advanced treatment steps for the elimination of trace organic contaminants. The present study investigated the effects of ozonation (O(3)) and activated carbon treatment (AC) on endocrine activities [estrogenicity, anti-estrogenicity, androgenicity, anti-androgenicity, aryl-hydrocarbon receptor (AhR) agonistic activity] with yeast-based bioassays. To evaluate the removal of non-specific toxicity, a cytotoxicity assay using a rat cell line was applied. Wastewater (WW) was sampled at two STPs after conventional activated sludge treatment following the secondary clarifier (SC) and after subsequent advanced treatments: O(3), O(3) + sand filtration (O(3-SF)), and AC. Conventional treatment reduced estrogenicity, androgenicity, and AhR agonistic activity by 78-99% compared to the untreated influent WW. Anti-androgenicity and anti-estrogenicity were not detectable in the influent but appeared in SC, possibly due to the more effective removal of respective agonists during conventional treatment. Endocrine activities after SC ranged from 2.0 to 2.8 ng/L estradiol equivalents (estrogenicity), from 4 to 22 μg/L 4-hydroxytamoxifen equivalents (anti-estrogenicity), from 1.9 to 2.0 ng/L testosterone equivalents (androgenicity), from 302 to 614 μg/L flutamide equivalents (anti-androgenicity), and from 387 to 741 ng/L β-naphthoflavone equivalents (AhR agonistic activity). In particular, estrogenicity and anti-androgenicity occurred in environmentally relevant concentrations. O(3) and AC further reduced endocrine activities effectively (estrogenicity: 77-99%, anti-androgenicity: 63-96%, AhR agonistic activity: 79-82%). The cytotoxicity assay exhibited a 32% removal of non-specific toxicity after O(3) compared to SC. O(3) and sand filtration reduced cytotoxic effects by 49%, indicating that sand filtration contributes to the removal of toxicants. AC was the most effective technology for cytotoxicity removal (61%). Sample evaporation reduced cytotoxic effects by 52 (AC) to 73% (O(3)), demonstrating that volatile substances contribute considerably to toxic effects, particularly after O(3). These results confirm an effective removal or transformation of toxicants with receptor-mediated mode of action and non-specific toxicants during O(3) and AC. However, due to the limited extractability, polar ozonation by-products were neglected for toxicity analysis, and hence non-specific toxicity after O(3) is underestimated.

The importance of the suspended solids parameter on the quantitative analysis of di-n-butyl phthalate in a wastewater treatment system

The present study has investigated the influence of the filtration step of the liquid-liquid extraction (LLE) on the quantitative analysis of di-n-butyl phthalate (DnBP) in the wastewater treatment system of the University of Caxias do Sul (WWTS-UCS). During five months, five wastewater samples from the inflow and outflow points were collected and submitted to LLE with and without the filtration step. The organic extracts were analyzed by Gas Chromatography with Flame Ionization Detection (GC/FID). The DnBP removal in the filtered samples was 36%, and the median DnBP concentration at the outflow point was 17.45 μg/mL. For the unfiltered samples, the DnBP removal was 39%, and the median DnBP concentration at the outflow point was 21.45 μg/mL. According to these results, an important fraction of the contaminant is retained in the LLE filtration step leading to considerable errors in the quantification of the target compounds.

Investigation of the estrogenic risk to feral male brown trout (Salmo trutta) in the Shannon International River Basin District of Ireland

The estrogenic potential of sewage treatment effluents and their receiving waters in the Shannon International River Basin District (SIRBD) of Ireland was investigated. An integrated approach, combining biological and chemical methods, was conducted to assess 11 rivers adjacent to sewage treatment plants (STPs) and their possible interference with the endocrine system of feral brown trout (Salmo trutta). Hepatosomatic index, gonadosomatic index, condition factor, histological (intersexuality) and endocrine (vitellogenin induction) parameters were assessed in a sample size of 10 at each location. The estrogenic burden was determined using an in vitro recombinant yeast assay containing the human estrogen receptor (YES assay). In addition, endocrine disrupting chemicals (EDCs) were quantitatively identified through a selection of pre-concentration techniques combined with chromatographic analysis at or near the selected locations. Chemical analysis of representative site samples identified phthalates and an alkylphenol in water and sediments in μg/L and mg/kg concentrations, respectively. There were no significant difference in somatic indices or the condition factor between upstream control and downstream test sites, and there was no evidence of reproductive alterations or the presence of intersex in studied male brown trout. However, raised vitellogenin (vtg) levels were detected in the blood plasma samples of male brown trout at 8 of the 11 sites. Significant levels were reported at 3 of the positive sites (p ≤ 0.05). In one particular location, vtg induction was observed in 100% of the male brown trout sampled downstream. These findings were supported by the YES assay, where estrogenic activity was detected in the same upstream and downstream sites giving 17β-estradiol equivalency factor (EEF) values of up to 2.67 ng/L. This study represents an integrated assessment approach, confirming the presence of estrogens in rivers of the SIRBD of Ireland, thus suggesting a cause-effect relationship to prolonged EDC-exposure in fish.