A comprehensive guide of remediation technologies for oil contaminated soil - Present works and future directions

An insight into the current oil spills and on-site bioremediation approaches to contaminated sites in Nigeria

Land oil spills in Nigeria have a long history of contaminating the soil, groundwater, vegetation, and streams with spill extension being the primary of numerous ordeals. These have left the host communities of oil fields and pipelines in crucial need of soil rehabilitation. Thus, this review provides insights into the current state of land oil spills and the effectiveness of on-site remediation approaches across communities. A total of 44 incidents of land oil spills of ≥ 500 bbl, amounting to 53,631 bbl between 2011 and 2019, was recorded by the Shell Petroleum Development Company, which primarily attributed to 83% of the total sabotage. Over 73% of the 53,631 bbl spills were unrecovered from the spill areas, which had deleterious impacts on farmlands, fishponds, rivers, and residential areas. Remediation by enhanced natural attenuation (RENA) is a feasible technique for restoring petroleum hydrocarbon-contaminated sites, but it might be ineffective when limited to tiling, windrows, and fertilizer applications due to the presence of non-biodegradable residues and contaminants beyond the aeration depth. However, bioremediation techniques ranging from non-supplemented in-situ and fertilizer supplemented in-situ to mixed in-situ and ex-situ bio-cells supplemented RENA are feasible approaches for spill sites. However, challenging limitations with regard to RENA application failures in the region include delayed responses to spill emergency, large amounts of un-recovered spilled oil, and un-implemented legislative guidelines for spill cleanup. Nevertheless, the temperature, moisture, nutrient, oxygen, and pH of the soil are essential parameters to be considered when implementing a landfarming remediation approach.

Application of enhanced electrokinetic remediation by coupling surfactants for kerosene-contaminated soils: Effect of ionic and nonionic surfactants

Electrokinetic (EK) by coupling surfactants is an enhanced promising remediation technology to eliminate hydrophobic organic contaminants (HOC_s) from low-permeable soils. It is also applied to remediate kerosene-contaminated soils using anionic (SDS) and non-ionic (Tween 80) surfactants at different concentrations. There was negligible removal efficiency (40%) of kerosene during traditional EK without any enhancement technique. In the present study, the application of 0.005M and 0.01M SDS in EK-SDS-1 and EK-SDS-2 improved the removal efficiency to 50 and 55%, respectively towards the anode. Furthermore, the use of Tween 80 in EK-Tw80-1 and EK-Tw80-2 at 0.1 and 1% concentrations was able to raise kerosene removal gradually from 45% to 52% towards the cathode. These findings suggest that higher concentrations of SDS and Tween 80 contribute to the more effective elimination of kerosene. Thus, in EK-SDS-Tw80-V1.5 and EK-SDS-Tw80-V2, SDS and Tween 80 were used simultaneously at higher concentrations, which led to 63 and 67% kerosene removal, respectively. Considering the maximum removal in EK-SDS-Tw80-V2, the energy consumption in EK-SDS-Tw80-V2 was 178 KWh/m³ due to the higher voltage gradient; whereas without increased voltage in EK-SDS-Tw80-V1.5, this amount was decreased to 84 KWh/m³. It is to be mentioned that the electro-osmotic flow (EOF) played a significant role in minimizing kerosene concentration during the EK process, particularly when combined with surfactants.

Enhanced degradation of total petroleum hydrocarbons in real soil by dual-frequency ultrasound-activated persulfate

Ultrasound (US) can be employed to activate persulfate (PS) for degrading total petroleum hydrocarbons (TPH). In this study, to improve the degradation efficiency, PS is combined with dual-frequency US (DFUS) towards synergistic degradation of TPH in real soil. After 180 min, the degradation percentages for DFUS/PS, DFUS, high-frequency US and high-frequency US/PS are around 88.9%, 38.7%, 7.3% and 54.2%, respectively. Additionally, the influence of US power, PS content, slurry pH and temperature, and TPH components on the degradation percentage in the DFUS/PS process are explored. Scanning electron microscopy (SEM) images and the results of specific surface area verify that the DFUS can break the soil aggregates more effectively than the single-frequency US, and thus enhance the TPH desorption and accelerate the oxidant diffusion. Moreover, the investigation of the mechanism is further evaluated through quenching and electron spinning resonance spectrum (ESR) tests. The results indicate that the generation of SO₄^- and OH in DFUS/PS is ~1.6 times and ~2.5 times as much, respectively, as in high frequency US/PS. The relative contributions to the synergistic TPH degradation in the DFUS/PS system are: SO₄^- (PS activation via the heat induced by US) > pyrolysis inside the bubbles (hydrophobicity of TPH) > SO₄^- (PS activation via US cavitation) >OH. Finally, the hypothesis is confirmed via the evaluation of the degradation kinetics, which shows that the combined process of DFUS/PS is not a simple addition of the US and PS, but provides a highly effective process of synergistic degradation.

Multifunctional metal-organic frameworks in oil spills and associated organic pollutant remediation

The release of toxic organic compounds into the environment in an event of oil spillage is a global menace due to the potential impacts on the ecosystem. Several approaches have been employed for oil spills clean-up, with adsorption technique proven to be more promising for the total reclamation of a polluted site. Of the several adsorbents so far reported, adsorbent-based porous materials have gained attention for the reduction/total removal of different compounds in environmental remediation applications. The superior potential of mesoporous materials based on metal-organic frameworks (MOFs) against conventional adsorbents is due to their intriguing and enhanced properties. Therefore, this review presents recent development in MOF composites; methods of preparation; and their practical applications towards remediating oil spill, organic pollutants, and toxic gases in different environmental media, as well as potential materials in the possible deployment in reclaiming the polluted Niger Delta due to unabated oil spillage and gas flaring.

Cleaning of oil-polluted bottom sediments of the boreal lake, Samotlor oil field, North Russia: case report

Small lakes in areas of intensive crude oil production may be susceptible to oil pollution arising from accidental spills and leaks, eventually leading to the pollution of bottom sediments. Effective cleaning of aquatic bottom sediments remains a challenge. Flotation is a potentially simple and reliable approach for the cleanup of bottom sediments without their excavation from the water body. Full-scale testing of flotation-based technology using the specially designed airlift plant allowed the cleaning of bottom sediments of an unnamed boreal lake ('the lake') within the Samotlor oil field, North Russia, heavily polluted with crude oil several decades ago. The lake bottom sediments are dominated by peat and unevenly polluted with oil. The average oil content in the lake bottom sediments was 111 g kg^-1. During the 1.5 months' field test in July-August 2018, the average total oil concentration in the bottom sediments of the lake was reduced to 1.99 g kg^-1. Secondary water contamination was minimal; the content of oil hydrocarbons in the water after completion of work did not exceed 0.09 ± 0.04 mg L^-1. This study demonstrates that flotation-based technology can be applied for in situ cleaning of oil-contaminated lake bottom sediments including those in boreal climates.

In situ oils/organic solvents cleanup and recovery using advanced oil-water separation system

Removing contaminants from wastewater is critical towards resolving global water pollution problems. However, the variety of oily contaminants composition, and the unsatisfactory performance and efficiency of current separation systems are still big challenges, thus developing efficient and scalable oil-water separation (OWS) methods is needed. Here, the performance of a novel pilot-scale oil-water separator skimmer (OWSS) prototype is fully investigated using an upflow fixed bed column system packed with polypropylene (PP) fibrous sorbent materials for dual continuous OWS and in situ oils/organic solvents recovery. The mechanism of oil sorption by the PP fibrous sorbents, as well as capillary and vacuum assisted oil flow within the inter-fiber voids is fully explored. A series of pilot-scale column experiments were performed with different bed heights (7.5-30 cm) and using different types of oil/solvent in order to determine their influence on the oil flux, OWS efficiency and recovered organic solvent purity. The OWSS provided excellent and stable performance. A trade-off relationship between oil flux and OWS efficiency can be obtained: The maximum flux was attained at the lowest sorbent bed height (7.5 cm), while the maximum OWS efficiency (>99%) was achieved at the highest sorbent bed height (30 cm). The materials' morphology and wettability were examined showing outstanding stability and recyclability, which demonstrates their efficient integration into the overall OWSS. This study is expected to provide significant insights into the feasibility and scalability of an advanced, environmentally friendly, and relatively cost-effective OWS system, towards promising industrial implementation to overcome large-scale oil spill cleanup and oily wastewater treatment shortcomings.

Oilfield waste treatment using novel hydrocarbon utilizing bacterial consortium - A microcosm approach

Oily sludge is a hazardous waste generated through petroleum producing and processing industrial units. Due to its harmful environmental impacts, it needs to be treated in sustainable manner. The present study aimed to evaluate influence of bioaugmentation on oily sludge biodegradation efficiency of a novel hydrocarbon utilizing bacterial consortium (HUBC) using microcosms. Three approaches (bioaugmentation, natural attenuation and abiotic factors) were used for microcosm studies. Bioaugmentation treatment showed best results for oily sludge degradation than natural attenuation and abiotic factors, resulting 82.13 ± 1.21% oily sludge degradation in 56 days. In bioaugmented microcosm on 56th day 0.30 ± 0.07 × 10⁸ CFU/g hydrocarbon utilizing bacteria were noted. Results showed that HUBC could be used to remediate soil polluted with oily sludge. This study imparts a notable approach for farming application(s).

New Frontiers of Anaerobic Hydrocarbon Biodegradation in the Multi-Omics Era

The accumulation of petroleum hydrocarbons in the environment substantially endangers terrestrial and aquatic ecosystems. Many microbial strains have been recognized to utilize aliphatic and aromatic hydrocarbons under aerobic conditions. Nevertheless, most of these pollutants are transferred by natural processes, including rain, into the underground anaerobic zones where their degradation is much more problematic. In oxic zones, anaerobic microenvironments can be formed as a consequence of the intensive respiratory activities of (facultative) aerobic microbes. Even though aerobic bioremediation has been well-characterized over the past few decades, ample research is yet to be done in the field of anaerobic hydrocarbon biodegradation. With the emergence of high-throughput techniques, known as omics (e.g., genomics and metagenomics), the individual biodegraders, hydrocarbon-degrading microbial communities and metabolic pathways, interactions can be described at a contaminated site. Omics approaches provide the opportunity to examine single microorganisms or microbial communities at the system level and elucidate the metabolic networks, interspecies interactions during hydrocarbon mineralization. Metatranscriptomics and metaproteomics, for example, can shed light on the active genes and proteins and functional importance of the less abundant species. Moreover, novel unculturable hydrocarbon-degrading strains and enzymes can be discovered and fit into the metabolic networks of the community. Our objective is to review the anaerobic hydrocarbon biodegradation processes, the most important hydrocarbon degraders and their diverse metabolic pathways, including the use of various terminal electron acceptors and various electron transfer processes. The review primarily focuses on the achievements obtained by the current high-throughput (multi-omics) techniques which opened new perspectives in understanding the processes at the system level including the metabolic routes of individual strains, metabolic/electric interaction of the members of microbial communities. Based on the multi-omics techniques, novel metabolic blocks can be designed and used for the construction of microbial strains/consortia for efficient removal of hydrocarbons in anaerobic zones.

From aliphatic compounds contaminated soil to active building material: An emerging opportunity for soil remediation and waste utilisation

Soil contaminated with the production wastewater of 4,4'-diaminostilbene-2,2'-disulfonic acid is extremely hazardous and difficult to bioremediate. In this study, a cost-effective method was developed to reduce the risk of contaminated soil and produce building materials through a combination of ultrasonic processing and solidification/stabilisation. Ultrasonic processing conditions of 5 min at 40 kHz were found to significantly improve the compressive strength of bricks. The results of scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis demonstrated that the enhanced strength was due to the ultrasonic processing controlling the shape and scale of the crystals and microstructure of the cement paste. Furthermore, the effect of the activating agent, CaO, on the leaching toxicity of the bricks was closely related to the curing temperature. Under natural dry conditions (10-25 °C), the leaching toxicity decreased along with the reduction of CaO. However, under high artificial temperature conditions (40 °C), increasing the CaO was beneficial for decreasing the leaching toxicity. The addition of 2.91% CaO was suitable for improving brick performance under both natural dry (10-25 °C) and artificial temperature curing conditions (40 °C). The results of GC-MS revealed that 64.8% and 66.7% of organic species and organic volume, respectively, were reduced in the leachate of the bricks, which was produced by CaO activation and ultrasonic treatments. It was demonstrated that the optimal combined process for cost-effectively transforming hazardous soil to active building materials is feasible.

Unitary and binary remediations by plant and microorganism on refining oil-contaminated soil

Refining oil contaminants are complex and cause serious harm to the environment. Remediation of refining oil-contaminated soil is challenging but has significant impact in China. Two plant species Agropyron fragile (Roth) P. Candargy and Avena sativa L. and one bacterium Bacillus tequilensis ZJ01 were used to investigate their efficiency in remediating the refining oil-polluted soil sampled from an oil field in northern China. The simulated experiments of remediations by A. fragile or A. sativa alone and A. fragile or A. sativa combined with B. tequilensis ZJ01 for 39 days and by B. tequilensis ZJ01 alone for 7 days were performed in the laboratory, with B. tequilensis ZJ01 added before or after the germination of seeds. Seed germination rates and morphological characteristics of the plants, along with the varieties of oil hydrocarbons in the soil, were recorded to reflect the remediation efficiency. The results showed that the contamination was weakened in all experimental groups. A. sativa was more sensitive to the pollutants than A. fragile, and A. fragile was much more resistant to the oil hydrocarbons, especially to aromatic hydrocarbons. Adding B. tequilensis ZJ01 before the germination of seeds could restrain the plant growth while adding after the germination of A. fragile seeds notably improved the remediation efficiency. The degradation rate of oil hydrocarbons by B. tequilensis ZJ01 alone was also considerable. Together, our results suggest that the unitary remediation by B. tequilensis ZJ01 and the binary remediation by A. fragile combined with B. tequilensis ZJ01 added after the germination of seeds are recommended for future in situ remediations.

Adsorption of toluene on various natural soils: Influences of soil properties, mechanisms, and model

This study investigated toluene adsorption on natural soils. The linear partition model was found to represent the adsorption isotherm well (R² = 0.958-0.994), compared with the Freundlich model (R² = 0.901-0.991). Therefore, the coefficient, K_d, of the linear model indicated the adsorption capacity of soils A to F. Traditionally, K_d and the total organic carbon (TOC) content have a good linear relationship. However, this relationship was weak (correlation coefficient (r) = 0.689) when TOC values (8.43-12.9 mg/g) were low and close. To correct this deviation, this study investigated the influences of physicochemical properties, such as special surface area, mineral composition, functional groups, pH, and potentials. As soils B and C consisted of a large amount of active clayey minerals (69.4% kaolinite and 79.3% nacrite, respectively) and rich functional groups, they demonstrated the strongest adsorption capacity. Additionally, the r for pH-K_d, zeta potential-K_d, and redox potential-K_d were high, at 0.806, 0.914, and 0.932, respectively. To explore adsorption mechanisms, the adsorption thermodynamic parameter (enthalpy) was used initially to determine the forces. Combined with the analysis of soil properties, the mechanisms identified were hydrophobic interaction and hydrogen-pi bonding, involving co-adsorption with water molecules. Based on all studies, the properties were quantified and simplified by the plastic limit (PL), and TOC was simplified by soil organic matter (SOM). Then, PL and SOM were weighted by the entropy-weight method to obtain the determination factor, DF, a logarithmic parameter to replace TOC. Finally, a new model describing toluene adsorption on natural soils was established and expressed as K_d = 4.80 + 3.53DF. This new model had significantly improved the correlation between K_d and TOC (r = 0.933) and expanded the engineering adaptability.

Experimental Investigation of the Role of DC Voltage in the Wettability Alteration in Tight Sandstones

The usage of direct current (DC) voltage has enormous potential for oil fields due to the effect of wettability alteration. However, the unclear mechanism of the wettability alteration has limited the application of this technology to oil fields. In this study, chemical and physical methods including contact angle tests, Fourier-transform infrared spectroscopy (FTIR) measurements, and atomic force microscope (AFM) experiments were combined to investigate the wettability alteration mechanism for tight sandstones subjected to DC voltage treatment. From the view of a chemical factor, FTIR results show that DC voltage decreases the number of Si-O-Si, C-O-C, C-O, and COOH groups, while it also increases the number of C═O and OH groups. The changes in molecular groups further improve the water-wetting property of tight sandstones. On the other hand, in a physical way, AFM results indicate that DC voltage improves the roughness of the rock surface. At the same time, the wetting state transfers from the Cassie-Baxter to the Wenzel. This increases the contact area of the solid-liquid interface. The augment of roughness and the transfer of the wetting state improve the water-wetting property of tight sandstones. By comparing the influences of both chemical and physical factors on wettability, it is concluded that although roughness indeed affects the wettability, chemical factors play a dominant role in determining the wettability. Achievements in this study can help researchers and engineers better understand the mechanism of wettability alteration and further accelerate the development of tight sandstones with DC voltage-related technology.

Bioremediation of oily sludge polluted soil employing a novel strain of Pseudomonas aeruginosa and phytotoxicity of petroleum hydrocarbons for seed germination

Agricultural land pollution is key a problem globally, which is linked with growth of industries. Petroleum industrial sector is one of the major industrial sectors and the activities of petroleum industry lead to the agricultural land pollution. Oily sludge is a type of solid and hazardous waste generated from petroleum industrial activities. Hence, there is an urgent need to find remediation methods of the oily sludge contaminated agricultural land. Thus, the aim of this work was to study bioremediation of oily sludge polluted soil employing a novel strain of Pseudomonas aeruginosa and evaluation of phytotoxicity on germination of Vigna radiata seed in pots. Five different approaches were adopted for the bioremediation studies, which included Bioaugmentation + Biostimulation, bioaugmentation, biostimulation, natural attenuation and abiotic factors. Simultaneous application of P. aeruginosa NCIM 5514 and nutrients in microcosm showed 92.97 ± 0.92% decrease in oily sludge with good hydrocarbon utilizing bacterial count and decreased nutrient level in 56 days. Pot experiments on seed germination of mung beans (Vigna radiata) seeds was performed by pot experiments. 80.95% germination in five days in treated soil. From the results it was concluded that simultaneous use of oily sludge degraders and nutrient supplement could revive seed germination ability of oily sludge polluted soil effectively. This is first report of comparing five techniques to bioremediate oily sludge polluted soil using Pseudomonas aeruginosa, followed by pot study using V. radiata seeds, showing that P. aeruginosa can be an efficient bioremediation agent and can be effectively used for remediation of oily sludge contaminated soil.

Study of the Characteristics of Two Immobilized Microbial Materials in Degradation and Evolution of Petroleum Hydrocarbon

To enhance the degradation efficiency of oily wastewater, polyacrylamide (PAM)-sodium alginate (SA) and poly(vinyl alcohol) (PVA)-sodium alginate (SA) were mixed and used as spherical supporting materials for the immobilization of microbials, which were employed as a platform to study the degradation of total petroleum hydrocarbons (TPHs) in the oily wastewater. The degradation and evolution of normal paraffin (n-paraffin) series have been studied by determining the crude oil group composition of the residual oils by the gas chromatography-mass spectrometry (GC-MS) analysis. The results show that the half-lives of the PAM-SA-immobilized microorganisms are 6.21 days, which is 2.11 days less than that of PVA-SA, indicating that more nutrients are provided by PAM-SA for microbial growth, which can accelerate the degradation of TPHs. As can be seen from the GC-MS analysis, the main peak carbons of the n-paraffin series are moved backward after 14 days of degradation, implying the degrading advantage of n-paraffin with low carbon numbers. The ∑C21^-/∑C22⁺ value of PAM-SA was measured to be 0.749, which is greater than that of PVA-SA (0.051), indicating that PAM-SA has a superior ability to degrade normal paraffins with high carbon numbers. After 14 days of degradation, an odd-even predominance (OEP) (the mass ratio of normal alkanes of odd carbon/even carbon) value of 1.075 for PAM-SA was obtained, which is slightly larger than that of PVA-SA (0.967), indicating a better degradation performance of PAM-SA, especially for the degradation of the even-carbon normal paraffins with high carbon numbers. The Pr/Ph of PAM-SA is 0.938, which is also greater than that of PVA-SA (0.844), indicating that the ability of PAM-SA for the degradation of isoprenoids is superior to that of PVA-SA under the immobilized conditions. Based on these results, in terms of immobilization of microorganisms, PAM-SA, instead of PVA-SA, is more advantageous for the degradation of TPH in the oily wastewater.

Bioremediation of intertidal zones polluted by heavy oil spilling using immobilized laccase-bacteria consortium

Heavy oil pollution in the intertidal zones has become a worldwide environmental problem. In this study, bioremediation on heavy oil pollutants in the intertidal zones using an immobilized laccase-bacteria consortium system was evaluated with the aid of intertidal experimental pools built in the coastal area. It is found that degradation efficiency of the immobilized laccase-bacteria consortium for heavy oil was 66.5% after 100 days remediation, with the reaction rate constant of 0.018 d^-1. Gas Chromatograph-Mass Spectrometer analysis shows that degradation efficiency of saturated hydrocarbons and aromatic hydrocarbons were 79.2% and 78.7%, which were 64.9% and 65.1% higher than control. It is further seen that degradation of long-chain n-alkanes of C26-C35 and polycyclic aromatic hydrocarbons with more than three rings were significant. Metagenomic analysis indicates that the immobilized laccase-bacterial consortium has not only increased the biodiversity of heavy oil degrading bacteria, but also accelerated the degradation of heavy oil.

Copper removal from contaminated soil through electrokinetic process with reactive filter media

Electrokinetic (EK) remediation has been used in the removal of metal ions from contaminated soil. This study focused on integrating the EK technique with different reactive filter media (RFM) of activated carbon (AC) and biochar (BC) for the first time without adding chemicals to facilitate the removal of copper ions from the contaminated kaolinite soil. Tests based on EK, EK coupled with AC (EK-AC), and EK combined with BC (EK-BC) were performed under an electric potential of 10 V, and the overall removal efficiency of copper ions decreased as EK-BC > EK-AC > EK. The results show that 27% of copper in the soil was captured by BC, compared with only 10% by AC. Additional EK-BC test performed under a constant current (20 mA) revealed that the acid front swept across the soil, resulting in 70.6-95.0% copper removal from soil sections 4 to 1 close to the anode region with more copper accumulation in section 5. Similar to the EK-BC test under a fixed voltage, 26% of copper in the soil was captured by BC during EK-BC treatment under a constant current although with a higher energy consumption. Moreover, RFM was regenerated by flushing with an acid solution, achieving 99.3% of copper recovery in BC and 78.4% in AC. Although the permeability of AC-RFM was higher than that of BC-RFM, copper contaminant was more easily leached out from the BC-RFM. The findings demonstrated the feasibility of contaminant entrapment in BC-RFM and recovery by acid leaching, with potential for sustainable soil remediation.

Moisture retention extended enhanced bioelectrochemical remediation of unsaturated soil

Bioelectrochemical systems (BESs) have demonstrated great promise in augmented biodegradation of petroleum hydrocarbons in water-saturated soils. However, bioremediation of unsaturated soil in vadose zone has been a challenge due to poor mass transfer and low conductivity. This study proposed a moisture retention layer (2 cm thickness) around the BES anodes to enhance soil remediation under unsaturated conditions. The active soil BESs (closed circuit) includes two reactors with anodic moisture-retaining layers of soil-polyacrylamide hydrogel (SHB) and graphite granule-polyacrylamide hydrogel (GHB) mixtures, and another reactor filled with only soil (SB) without moisture-retaining layer. An open circuit SB was served as a control to simulate natural attenuation. This study demonstrated for the first time that moisture retention layers around the BES anodes could significantly extend and enhance hydrocarbon degradation in vadose zone soil. Results showed that SHB reactor could maintain 43-100% longer duration for electricity generation than other reactors. Correspondingly, SHB showed the best removal (average 21-37%) of total petroleum hydrocarbon (TPH) in spatial distribution, which was ~91% and ~164% higher than other BESs and control, respectively. This study demonstrated that by using low-cost and environmentally friendly hydrogel, BESs could become a viable remediation method for vadose zone soil.

Thermal desorption as a high removal remediation technique for soils contaminated with per- and polyfluoroalkyl substances (PFASs)

Soils contaminated with per- and polyfluoroalkyl substances (PFASs) are an important source for impacting drinking water delivery systems and surface water bodies world-wide, posing an urgent risk to human health and environmental quality. However, few treatment techniques have been tested for PFAS-contaminated soil hotspots. This study investigated the possibility of thermal desorption as a possible technique to remediate soils contaminated with multiple PFASs. Two fortified soils (∑₉PFAS ≈ 4 mg kg^-1) and one field-contaminated soil (∑₉PFAS ≈ 0.025 mg kg^-1) were subjected to a 75-min thermal treatment at temperatures ranging from 150 to 550°C. Soil concentrations of PFASs showed a significant decrease at 350°C, with the ∑₉PFAS concentration decreasing by, on average, 43% and 79% in the fortified and field contaminated soils, respectively. At 450°C, >99% of PFASs were removed from the fortified soils, while at 550°C the fraction removed ranged between 71 and 99% for the field contaminated soil. In the field contaminated soil, PFAS classes with functional groups of sulfonates (PFSAs) and sulfonamides (FOSAs) showed higher removal than the perfluoroalkyl carboxylates (PFCAs). Thus thermal desorption has the potential to remove a wide variety of PFASs from soil, although more studies are needed to investigate the cost-effectiveness, creation of transformation products, and air-phase vacuum filtration techniques.

Remediation of aristolochic acid-contaminated soil by an effective advanced oxidation process

Aristolochic acids (AAs) are persistent soil pollutants in the agricultural fields of the Balkan Peninsula that are endemic for Aristolochia clematitis L. This class of carcinogenic and nephrotoxic phytotoxins is taken up by crops through root absorption and contaminates staple foods across the peninsula. Human exposure to AAs via dietary intake has recently been recognized as a cause of Balkan endemic nephropathy. For the sake of public health, human exposure to AAs from all sources should be minimized in a timely manner. However, currently, there is no available remediation method to remove AAs from soil. In this study, we developed the first soil remediation method for AAs using Fenton's reagent (FR), a combination of ferrous ion and hydrogen peroxide, and optimized factors, including pH, temperature, time, and dose of FR, to achieve the best degradation performance. The maximum AA degradation efficiency was found to be >97% in soil with 500 μg kg^-1 of AAs. We anticipate that this developed method, mediated via Fenton reaction, will be useful to effectively eliminate AAs from the Balkan farmlands.

Intensification of Ex Situ Bioremediation of Soils Polluted with Used Lubricant Oils: A Comparison of Biostimulation and Bioaugmentation with a Special Focus on the Type and Size of the Inoculum

Used lubricant oils (ULOs) strongly bind to soil particles and cause persistent pollution. In this study, soil microcosm experiments were conducted to model the ex situ bioremediation of a long term ULO-polluted area. Biostimulation and various inoculation levels of bioaugmentation were applied to determine the efficacy of total petrol hydrocarbon (TPH) removal. ULO-contaminated soil microcosms were monitored for microbial respiration, colony-forming units (CFUs) and TPH bioconversion. Biostimulation with inorganic nutrients was responsible for 22% of ULO removal after 40 days. Bioaugmentation using two hydrocarbon-degrader strains: Rhodococcus quingshengii KAG C and Rhodococcus erythropolis PR4 at a small inoculum size (107 CFUs g-1 soil), reduced initial TPH concentration by 24% and 29%, respectively; the application of a higher inoculum size (109 CFUs g-1 soil) led to 41% and 32% bioconversion, respectively. After 20 days, all augmented CFUs decreased to the same level as measured in the biostimulated cases, substantiating the challenge for the newly introduced hydrocarbon-degrading strains to cope with environmental stressors. Our results not only highlight that an increased number of degrader cells does not always correlate with enhanced TPH bioconversion, but they also indicate that biostimulation might be an economical solution to promote ULO biodegradation in long term contaminated soils.

AOPs-based remediation of petroleum hydrocarbons-contaminated soils: Efficiency, influencing factors and environmental impacts

Petroleum hydrocarbons are a class of anthropogenic compounds including alkanes, aromatic hydrocarbons, resins, asphaltenes and other organic matters, and soil pollution caused by petroleum hydrocarbons has drawn increasing interest in recent years. Multiple advanced oxidation processes (AOPs) are emerging to remediate petroleum hydrocarbons-contaminated soils, while very few studies have focused on the features of AOPs applied in soils. This review aims to provide an updated overview of the state of the science about the efficiency, influencing factors and environmental implications of AOPs. The key findings from this review include: 1) cyclodextrin and its derivatives can be used to synthesize targeting reagents; 2) soil organic matter (SOM), glucose and cement can activate persulfate; 3) SOM affects redox circumstance in soil and could be further developed for enhancing the catalysis effect of transition metals; 4) non-thermal plasma and wet oxidation are promising methods of AOPs to remove petroleum hydrocarbons from soil; 5) the occurrence, fate, and transformation of intermediates during the degradation of petroleum hydrocarbons in soil should be considered more. Overall, this review reveals an urgent need to develop the cost-effective remedial strategies for petroleum hydrocarbons contaminated soils, and to advance our knowledge on the generation, transport and propagation of radicals in soils.

Recovery of efficient treatment performance in a semi-aerobic aged refuse biofilter when treating landfill leachate: Washing action using domestic sewage

Semi-aerobic aged refuse biofilters (SAARB) are known to efficiently remove organic matter, nitrogenous substances, and anions from landfill leachate. However, long-term recirculation of mature landfill leachate inevitably leads to accumulation of pollutants and decreases treatment capacity. In this study, the washing action provided by domestic sewage was used to recover and even enhance the treatment performance of SAARBs treating mature landfill leachate. Three SAARB columns were operated for 300 d after which a "Recirculation-Washing-Recirculation" sequence was followed. In the first recirculation period (22 d), removal of chemical oxygen demand (COD) and total nitrogen (TN) decreased from ca. 90% and 60%, respectively, initially to about 75% and less than 20%, respectively. Thereafter, washing (20 d) of the SAARBs was accomplished by applying domestic sewage. In the subsequent second recirculation period (30 d), the SAARBs were operated at the same hydraulic loading as used initially, but achieved high (ca. 90%) COD and relatively high (ca. 59%-76%) TN removal, including degradation of refractory organic matter such as humic- and fulvic-like substances. Overall, the mechanisms of the treatment performance recovery (including organics degradation and nitrification-denitrification) using domestic sewage can be attributed to three main effects: (1) some accumulated pollutants were washed out, thereby leading to recovery of the adsorption ability of aged refuse; (2) the inhibition of bio-refractory organics stress on microbial activities was mitigated by domestic sewage washing; and (3) the wash out of some accumulated salts (e.g., chloride and sulfate ions) probably helped the microbial activity recover.

Effective exploitation of anionic, nonionic, and nanoparticle-stabilized surfactant foams for petroleum hydrocarbon contaminated soil remediation

Contaminated environments posed serious threats to the ecosystems and their living beings. Suitable preventive approaches should be adopted for effective remediation of contaminated environments to remove or lower their health and environmentally-related hazardous aspects. Petroleum or traces of petroleum contamination from oil fields and refineries to exposed soil in the form of gasoline, petrol, diesel, and used motor oil are a rich source of potential damage to the environment. Conventional ways of treatment and management of hydrocarbon are complicated, insufficient, and expensive. Herein, we reviewed a smart approach for the removal of petroleum source contamination from exposed soil using environment-friendly chemical surfactants and nanoscale surfactant system. The host/guest complexes formation of surfactants with the hydrocarbons (hydrophobic contaminants) of soil and water by the encapsulation mechanism of hydrophobes into the (micelles) a self-assembly aggregation of surfactants. Recently, surfactants stabilized by nanoparticles (NPs) acquired more importance and popularity over surfactant alone. The persistence of diverse hydrocarbon-based contaminants and the mechanisms of removal using pristine surfactants or NP-stabilized surfactant foams are discussed with suitable examples. In summary, herein, an effort has been made to present the notable potentialities of pristine surfactants and NP-stabilized surfactant foams to remediate the petroleum hydrocarbon contaminated soil for a greener and sustainable ecosystem.

Molecular Transformation of Crude Oil Contaminated Soil after Bioelectrochemical Degradation Revealed by FT-ICR Mass Spectrometry

Bioremediation is a low-cost approach for crude oil spill remediation, but it is often limited by electron acceptor availability. In addition, the biodegradation products of crude oil contaminants are complex, and transformation pathways are difficult to decipher. This study demonstrates that bioelectrochemical systems (BESs) can be effective in crude oil degradation by integrating biological and electrochemical pathways, and more importantly, it provides the first understanding on the daughter products of bioelectrochemical hydrocarbon degradation. Using electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and two-dimensional gas chromatography (GC × GC), the results showed that the active BES reactor improved the total petroleum hydrocarbon (TPH) degradation by ∼70% than open circuit control reactors. After separating the daughter products into nine fractions (MA1-MA9) according to the molecular weight (m/z 200-1000) by modified aminopropyl silica (MAPS) fractionation, we found that active BES remediation resulted in 50% more polar, oxygen-containing naphthenic (NAP) acids. The MA4 fraction (centered at ∼550 Da) increased by 47%, and MA5 and MA7 fractions with higher molucular weight increased by a maximum of ∼7- and 9-fold, respectively. These results are in accordance with the variation of bulk elemental compositions in O₂ species, where daughter transformation products doubled relative to parent oil extract. The contribution of newly generated NAP acids was mainly from higher-order oxygen species (O₅-O₆) with increased hydrophobicity in conjunction with a decreased abundance in lower-order oxygen species (O₁). Overall, the study suggests that n-alkane degradation occurred via β-oxidation to oxygenated transformation products with lower molecular weight, such as n-alcohols in O₁ class and subsequently to n-fatty acids in O₂ class.

Fertility Deterioration in a Remediated Petroleum-Contaminated Soil

A soil that had been remediated by soil washing and chemical oxidation was evaluated, comparing it to an uncontaminated control soil ~30 m away. Profile descriptions were made of both soils over a 0–1 m depth, and samples were analyzed from each soil horizon. Samples were also analyzed from surface soil (0–30 cm). The control soil (a Fluvisol), had several unaltered A and C horizons, but the remediated soil presented only two poorly differentiated horizons, without structure and much lower in organic matter (<0.5%). In surface samples (0–30 cm), the bulk density, sand-silt-clay contents, field capacity, organic matter, and porosity were different with respect to the control (p > 0.05), and there was much greater compaction (3.04 vs. 1.10 MPa). However, the hydrocarbon concentration in the remediated soil was low (969.12 mg kg⁻¹, average), and was not correlated to soil fertility parameters, such as porosity, organic matter, pH, moisture, field capacity or texture (R² < 0.69), indicating that the impacts (such as compaction, lower field capacity and moisture content) were not due to residual hydrocarbons. Likewise, acute toxicity (Microtox) was not found, nor water repellency (penetration time < 5 s). It was concluded that the fertility deterioration in this soil was caused principally from the mixture of upper (loam) and lower (silty clay to silty clay loam) horizons during remediation treatment. Another important factor was the reduction in organic material, probably caused by the chemical oxidation treatment.

Treatment of diesel-contaminated soil using thermal water vapor arc plasma

Soil pollution with petroleum-based fuels is a serious issue causing environmental problems. Recently, the use of plasma technologies for soil remediation has shown an interest and great potential. The remediation process can be performed in a fast timeframe without adding supplementary chemical reagents or without additional pre-treatment of the polluted soil. As a result, the use of plasma enables to obtain highly effective degradation of pollutants. Thus, in the present experimental research, diesel fuel removal from contaminated soil by utilizing thermal water vapor arc plasma was investigated. It was found that increased concentration of diesel fuel in the soil raised carbon and hydrogen concentrations in the soil. Moreover, soil surface morphology was modified by causing the formation of bigger agglomerates. It was also determined that after the plasma treatment process, soil grains became akin in size and structure to clean soil grains. A complete desorption of carbon, which came from diesel fuel to the soil, and a slight decomposition of organic carbon present in the soil were observed during the soil remediation process. Thermogravimetric analysis showed that regardless of the diesel fuel concentration in the soil, four stages of mass loss were observed: moisture loss, vaporization, and combustion of diesel fuel as well as reduction of volatiles and char in the soil. Producer gas analysis indicated that during soil remediation diesel fuel was mainly converted to synthesis gas, i.e., a mixture of H₂, CO, and CO₂. Moreover, the decomposition of diesel fuel and the formation of synthesis gas depended on the amount of pollutant in the soil. According to the obtained results, thermal water vapor arc plasma was able to completely remove diesel fuel from polluted soil in the form of synthesis gas with no significant influence on soil's properties.

Removal kinetics of petroleum hydrocarbons from low-permeable soil by sand mixing and thermal enhancement of soil vapor extraction

Thermally enhanced remediation of n-alkanes-contaminated silty soil mixed with coarse quartz sands was demonstrated in a laboratory cylindrical tank with diameter of 40 cm and depth of 30 cm. The removal kinetics of semi-volatile n-alkanes (C₁₀, C₁₁, C_13-16) under three pulsed heating operations of soil vapor extraction (SVE) was investigated. CMG-STARS software was adopted to simulate the dynamics of heat transfer within the soil column. The results indicated the dramatic increase of air permeability of soil and acceleration of heat transfer after introduction of sand, with the result of achieving rapid soil remediation. Gas-phase transfer of n-alkanes mainly occurred when average soil temperature was ≥100 °C. At the end of remediation with soil subjected to heating for 30.8 h (total running time), the average soil concentration of total n-alkanes was reduced from initial 3106.5 to 202.4 mg/kg, corresponding to 93.4% of mass removal. The residual n-alkanes of C₁₀, C₁₁, C₁₃ and C₁₄ in all collected soil samples were declined to levels of lower than 10 mg/kg. Most of the soil concentration-gradient curves for n-alkanes tested almost coincided with their isothermal contours, indicating the key impact of thermal drive force on contaminant transfer.

Electrokinetic remediation of contaminants of emergent concern in clay soil: Effect of operating parameters

The potential of electrokinetic (EK) remediation to remove from soils one particular group of contaminants - contaminants of emergent concern (CECs), remains largely overlooked. The present study aimed to evaluate the efficiency of the EK process for the remediation of an agricultural clay soil containing CECs. The soil was spiked with four CECs - sulfamethoxazole, ibuprofen, triclosan and caffeine - and their status (i.e. residual amounts and spatial distribution) evaluated at the seventh day of EK treatment at a defined current intensity, directionality and duration of void period. The characterization of the soil physicochemical properties was also undertaken. The results showed similar degradation trends in all applied EK strategies, which were suchlike to that of the natural attenuation (biotic control): sulfamethoxazole > ibuprofen ≥ triclosan ≥ caffeine. The removal of the CECs was higher under a 10 mA constant current application than in the natural attenuation (up to 2.8 times higher; from 13 to 85%). Caffeine was the exception with its best removal efficiency being achieved when the ON/OFF switch mode with a void period duration of 12 h was used (36%). The use of electro-polarization reversal mode did not favour the remediation. The soil pH variations resulting from EK application were determinant for triclosan remediation, which increased with soil pH increase. The only EK condition that promoted the removal of all CECs was the ON/OFF switch mode of 12 h (removals between 36 and 72%), in which only minor physicochemical disturbances of the soil were observed. This is in accordance with a potential application of EK in-situ. The last is reinforced by the low estimated electrical cost of the best EK technology - 2.33 €/m³ for the 7 days. Overall the EK remediation processes are a promising technology to stimulate in situ the removal of CECs from agricultural soils.

A review on the sustainability of thermal treatment for contaminated soils

Sustainable remediation is a goal in the remediation industry. Thermal treatment can remediate contaminated sites quickly and reliably, but its energy-intensive nature and potential to damage soil properties make it seemingly not sustainable. This review evaluates the potential for thermal treatment to become a sustainable remediation technology based on a comprehensive analysis of the scientific literature. The fundamentals, advantages, and limitations of single thermal treatment technologies are summarized. The compatibility and advantages of thermal treatment coupled with thermal, physicochemical, or biological technologies are reviewed. The results suggest that ingeniously designed coupled technologies can improve the availability and removal efficiency of contaminant, suppress the production of toxic byproduct, and reduce the required heating temperature and energy input. The sustainability of thermal treatment is then discussed from the perspectives of energy efficiency and land reuse. Approaches for improving energy efficiency include applying solar energy-based technologies, smoldering-based technologies, and coupled technologies. For land reuse, heating below 250 °C has negligible adverse impacts on most soil properties, and can increase nutrient availability and release dissolved organic carbon to support the growth of microorganisms and plants. Heating above 250 °C can significantly reduce soil organic matter and clay content, which decreases the soil cation exchange capacity and water holding capacity, and consequently damages the soil fertility. Some restoration strategies are also proposed for the recovery of soil quality. In addition, thermally remediated soil is considered to be a good candidate as an engineering medium for construction. This review concludes with an outlook of future research efforts that will further shift thermal treatment toward sustainable remediation.

Influence of abiotic factors, natural attenuation, bioaugmentation and nutrient supplementation on bioremediation of petroleum crude contaminated agricultural soil

Contamination of agricultural land(s) is a major problem worldwide which is associated with activities of petroleum industry. Due to these exploration activities remedial techniques for clean-up of contaminated agricultural soil(s) has become an alarming research topic. Hydrocarbon utilizing bacterial consortium (HUBC), isolated from petroleum crude (petroleum industry waste water and soil) contaminated sites, India has been used for soil microcosm study. The aim of present study was to compare potency of five different techniques to remediate petroleum hydrocarbons contaminated agricultural soil by employing soil microcosm study. To the best of our knowledge this is the first report for comparison of five different techniques (abiotic control, natural attenuation, biostimulation, bioaugmentation and simultaneous bioaugmentation & biostimulation) for bioremediation of agricultural soil using consortium of hydrocarbon utilizers by employing soil microcosms. Concurrent application of bioaugmentation (with HUBC) and biostimulation (with nutrient amendments) in the soil microcosm resulted in 93.67 ± 1.80% hydrocarbons degradation in 45 days of experiment and hydrocarbon utilizing bacterial count was recorded 4.11 ± 0.11 × 10⁸ CFU/g. In the bioaugmented and biostimulated soil microcosm organic carbon was reduced from 3.49 ± 0.08% to 0.62 ± 0.11% with simultaneous decrease of other nutrients. The consortium could survive in artificially crude oil contaminated and nutrients amended agricultural soil microcosm and could degrade petroleum hydrocarbons effectively in soil microcosm conditions. This suggests its application as a potential bioremediation agent for farmland restoration i.e. management of soil environment.

Progress in ultrasonic oil-contaminated sand cleaning: a fundamental review

Steady efforts in using ultrasonic energy to treat oil-contaminated sand started in the early 2000s until today, although pilot studies on the area can be traced to even earlier dates. Owing to the unique characteristics of the acoustic means, the separation of oil from sand has been showing good results in laboratories. This review provides the compilation of researches and insights into the mechanism of separation thus far. Related topics in the areas of oil-contaminated sand characterizations, fundamental ultrasonic cleaning, and cavitation effects are also addressed. Nevertheless, many of the documented works are only at laboratory or pilot-scale level, and the comprehensive interaction between ultrasonic parameters towards cleaning efficiencies may not have been fully unveiled. Gaps and opportunities are also presented at the end of this article.

Cobalt oxyhydroxide as an efficient heterogeneous catalyst of peroxymonosulfate activation for oil-contaminated soil remediation

The persulfate/Fe²⁺ system has been proposed for the chemical oxidation for soil remediation, however, the homogeneous iron catalyst was hard to reuse which limited the further application. Cobalt oxyhydroxide (CoOOH) existed as a mineral in nature, which was environmentally friendly. Thus, in this study, CoOOH was selected as an efficient heterogeneous catalyst for peroxymonosulfate (PMS) activation to remediate oil contaminated soil by chemical oxidized reaction. 88.3% of oil at the initial concentration of 78-99 mg/kg can be removed within 24 h under the conditions of 1.0 g/L CoOOH and 0.1 M PMS at room temperature. The residual oil content was approximately 11.5 mg/kg which was lower than the standard of petroleum hydrocarbons for residential land (30 mg/kg), published by the Canadian Council of Ministers of the Environment (CCME). Specifically, the PMS/CoOOH system had a relatively high apparent reaction rate constant (0.3078 h^-1), which was approximately twice that of the PS/Fe²⁺ system (0.1601 h^-1). Furthermore, multiple radicals and reactive oxygen species (ROS), such as SO₄^-, O₂^- and ¹O₂, were involved in the oil removal oxidation reaction. Moreover, 73% total organic carbon (TOC) had been removed after the reaction. The findings of this study suggested that the oil-contaminated soil and CoOOH could both be recycled after remediation using the PMS/CoOOH system. In summary, the results indicated that CoOOH is a promising heterogeneous catalyst, and the PMS/CoOOH system could be considered as a feasible alternative to the PS/Fe²⁺ system for the remediation of oil-contaminated soil.

Distribution of Polycyclic Aromatic Hydrocarbons in Sunken Oils in the Presence of Chemical Dispersant and Sediment

The formation of sunken oils is mainly dominated by the interaction between spilled oils and sediments. Due to their patchiness and invisibility, cleaning operations become difficult. As a result, sunken oils may cause long-term and significant damage to marine benthonic organisms. In the present study, a bench experiment was designed and conducted to investigate the quantitative distribution of polycyclic aromatic hydrocarbons (PAHs) in sunken oils in the presence of chemical dispersant and sediment. The oil sinking efficiency (OSE) of 16 priority total PAHs in the sediment phase was analyzed with different dosages of dispersant. The results showed that the synergistic effect of chemical dispersant and sediment promoted the formation of sunken oils, and the content of PAHs partitioned in the sunken oils increased with the increase of dispersant-to-oil ratios (DORs). Furthermore, with the addition of chemical dispersant, due to the solubility and hydrophobicity of individual PAHs, the high molecular weight (HMW) PAHs with 4–6 rings tended to partition to sediment compared with low molecular weight (LMW) PAHs with 2–3 rings. The synergistic effect of chemical dispersant and sediment could enhance the OSE of HMW PAHs in sunken oils, which might subsequently cause certain risks for marine benthonic organisms.

A review on the application of chemical surfactant and surfactant foam for remediation of petroleum oil contaminated soil

Soil, exposed to petroleum oil contaminants (in the form of petrol, diesel, gasoline, crude oil, used motor oil), may cause potential damage to the environment, animal and human health. In this review article, mechanisms of the petroleum oil contaminant removal from soil by chemical surfactant systems such as surfactant solution, surfactant foam and nanoparticle stabilized surfactant foams are explained. Laboratory based research works, reported within the last decade on the application of similar systems towards the removal of petroleum oil contaminant from the soil, have been discussed. It is an important fact that the commercial implementation of the chemical surfactant based technology depends on the environmental properties (biodegradability and toxicity) of the surfactants. In recent times, surfactant foam and nanoparticle stabilized surfactant foam are becoming more popular and considered advantageous over the use of surfactant solution alone. However, more research works have to be conducted on nanoparticle stabilized foam. The impact of physicochemical properties of the nanoparticles on soil remediation has to be explored in depth.

A newly isolated strain of Serratia sp. from an oil spillage site of Assam shows excellent bioremediation potential

A hydrocarbon-degrading strain was isolated from a petroleum oil-contaminated site which was identified on the basis of 16S rDNA gene sequencing as a member of the genus Serratia. The isolate reduced surface tension of petroleum oil supplemented medium by 48.35% with respect to control after 7 days of treatment. Fluorescence microscopy revealed that its chemotaxis was towards hydrocarbon. The isolate degraded 87.54 and 85.48% of diesel and kerosene in liquid culture, respectively, after 28 day incubation at 37 ± 2 °C. The ex situ pilot scale bioremediation experiment in which artificially contaminated soil (10 and 20% v/w kerosene) was treated for 7 days showed a germination rate of Vigna radiate seeds of 52% and 72%, respectively. Interestingly, a germination rate of 31% was obtained with the heavily contaminated soil samples collected from the oil spillage site after 20 days of bioremediation treatment. The presence of υ_CH3 (asymmetric stretching), υ_C=C (stretch), and υ_C-C (stretch) in the crude biosurfactant produced by the isolate was revealed by FTIR analysis, and emulsification index (E ₂₄) was found 60 and 56.6%, respectively, against diesel and kerosene oil. The non-cytotoxicity nature of the biosurfactant also supports its potential application in field trial.

Combining electrokinetic transport and bioremediation for enhanced removal of crude oil from contaminated marine sediments: Results of a long-term, mesocosm-scale experiment

Marine sediments represent an important sink of harmful petroleum hydrocarbons after an accidental oil spill. Electrobioremediation techniques, which combine electrokinetic transport and biodegradation processes, represent an emerging technological platform for a sustainable remediation of contaminated sediments. Here, we describe the results of a long-term mesocosm-scale electrobioremediation experiment for the treatment of marine sediments contaminated by crude oil. A dimensionally stable anode and a stainless-steel mesh cathode were employed to drive seawater electrolysis at a fixed current density of 11 A/m². This approach allowed establishing conditions conducive to contaminants biodegradation, as confirmed by the enrichment of Alcanivorax borkumensis cells harboring the alkB-gene and other aerobic hydrocarbonoclastic bacteria. Oil chemistry analyses indicated that aromatic hydrocarbons were primarily removed from the sediment via electroosmosis and low molecular weight alkanes (nC₆ to nC₁₀) via biodegradation.

Differentiation between physical and chemical effects of oil presence in freshly spiked soil during rhizoremediation trial

Petroleum contamination and its remediation via plant-based solutions have got increasing attention by environmental scientists and engineers. In the current study, the physiological and growth responses of two diesel-tolerant plant species (tolerance limit: 1500-2000 mg/kg), Italian ryegrass (Lolium multiflorum) and Birdsfoot trefoil (Lotus corniculatus), have been investigated in vegetable oil- and diesel oil-amended soils. A long-term (147-day) greenhouse pot experiment was conducted to differentiate the main focus of the study: physical and chemical effects of oil (vegetable and diesel) in freshly spiked soils via evaluating the plant performance and hydrocarbon degradation. Moreover, plant performance was evaluated in terms of seed germination, plant shoot biomass, physiological parameters, and root biomass. Addition of both diesel oil and vegetable oil in freshly spiked soils showed deleterious effects on seedling emergence, root/shoot biomass, and chlorophyll content of grass and legume plants. Italian ryegrass showed more sensitivity in terms of germination rate to both vegetable and diesel oil as compared to non-contaminated soils while Birdsfoot trefoil reduced the germination rate only in diesel oil-impacted soils. The results of the current study suggest that both physical and chemical effects of oil pose negative effects of plant growth and root development. This observation may explain the phenomenon of reduced plant growth in aged/weathered contaminated soils during rhizoremediation experiments.

Study on the degradation performance and kinetics of immobilized cells in straw-alginate beads in marine environment

In this study, two strains Halomonas and Aneurinibacillus were mixed in equal proportions as free cells that could degrade diesel and produce biosurfactant. A new type of immobilized cells, free cells immobilized in beads combined with sodium alginate and straw, was studied. The components of straw-alginate beads were optimized by Response Surface Method, and the degradation performance of immobilized cells was determined. The result indicated that the density, strength and broken rate of straw-alginate beads were 1.04 g/cm³, 216 g and 4%, respectively. The best degradation rate of immobilized cells in straw-alginate beads could be 68.68%. Lately, by analyzing the Monod model, v_max (maximum specific degradation rate of diesel) and K_S (half saturation rate constant) of immobilized cells in straw-alginate beads were 1.84 d^-1 and 3.23 g/L, respectively, which explained the higher degradation performance.

Bioremediation of petroleum-contaminated soil enhanced by aged refuse

In this study, the effect of aged refuse on biodegradation of total petroleum hydrocarbons (TPH), microbial counts, soil ecotoxicity, dehydrogenase activity and microbial community compositions were investigated in solid phase reactors during a 30-week period. The results demonstrate that the removal efficiency of TPH was significantly higher in the soil supplemented with aged refuse than in the soil without aged refuse. After 30 weeks, the removal efficiencies of TPH in soils were 29.3%, 82.1%, 63.7% and 90.2% in the cases of natural attenuation, nutrient addition (with NH₄NO₃ and K₂HPO₄), supplement with 20% (w/w, dry weight basis) of aged refuse and the combination of nutrient and aged refuse. Nutrient plus aged refuse made the TPH concentration decrease to below the threshold level of commercial use required for Chinese soil quality for TPH (<3000 mg/kg) in 30 weeks. It was also found that dehydrogenase activity, bacterial counts and degrader abundance in the soil were remarkably enhanced by the addition of aged refuse (20%,w/w). Total organic carbon analysis demonstrates that large amounts of hydrocarbon intermediates occurred in the soil after bioremediation.

Pilot-Scale Pyrolytic Remediation of Crude-Oil-Contaminated Soil in a Continuously-Fed Reactor: Treatment Intensity Trade-Offs

Pyrolytic treatment offers the potential for the rapid remediation of contaminated soils. However, soil fertility restoration can be highly variable, underscoring the need to understand how treatment conditions affect soil detoxification and the ability to support plant growth. We report here the first pilot-scale study of pyrolytic remediation of crude-oil-contaminated soil using a continuously fed rotary kiln reactor. Treatment at 420 °C with only 15 min of residence time resulted in high removal efficiencies for both total petroleum hydrocarbons (TPH) (99.9%) and polycyclic aromatic hydrocarbons (PAHs) (94.5%) and restored fertility to clean soil levels (i.e., Lactuca sativa biomass dry weight yield after 21 days increased from 3.0 ± 0.3 mg for contaminated soil to 8.8 ± 1.1 mg for treated soil, which is similar to 9.0 ± 0.7 mg for uncontaminated soil). Viability assays with a human bronchial epithelial cell line showed that pyrolytic treatment effectively achieved detoxification of contaminated soil extracts. As expected, TPH and PAH removal efficiencies increased with increasing treatment intensity (i.e., higher temperatures and longer residence times). However, higher treatment intensities decreased soil fertility, suggesting that there is an optimal system-specific intensity for fertility restoration. Overall, this study highlights trade-offs between pyrolytic treatment intensity, hydrocarbon removal efficiency, and fertility restoration while informing the design, optimization, and operation of large-scale pyrolytic systems to efficiently remediate crude-oil-contaminated soils.

Contaminated land and wetland remediation in Nigeria: Opportunities for sustainable livelihood creation

The Niger Delta region of Nigeria is one of the most crude oil impacted deltas globally. The region has experienced over five decades of oil related contamination of the total environment (air, soil, water and biota). In 2011, UNEP released a seminal report on oil impact on Ogoniland environments, which up scaled demands for urgent clean up and restoration of degraded bio-resource rich environments of the Niger Delta, starting from Ogoniland. The Nigerian Government demonstrated renewed political will to remediate contaminated sites in Ogoniland with a launch of the clean-up exercise in June 2016. Stakeholders' expectations from the clean-up include not only environmental remediation but also restoration and creation of sustainable livelihood opportunities to reduce poverty in the region. Most studies have focused on the environmental restoration aspect and identified bioremediation as the likely appropriate remediation approach for Ogoniland, given its low environmental footprints, and low-cost burden on the weak and overstretched economy of Nigeria. This study mapped opportunities for sustainable livelihood creation during the Ogoniland remediation and restoration exercise. Given the value chain of bioremediation and its ancillary activities, the study analysed opportunities and mechanisms for skilled and unskilled job creation and prospects for sustainable livelihoods and knock-on effects. It is anticipated that the clean-up process would lead to economic prosperity and mitigate resource-driven conflicts in the Niger Delta. The study provides an exemplar for waste-to-wealth transformation in regions where natural resource mining has impacted communities, and has dislocated local economies and age-old livelihood structures.