Photoplethysmography and its application in clinical physiological measurement

Enhanced premature ventricular contraction pulse detection and classification using deep convolutional neural network

Access to accurate and precise monitoring systems for cardiac arrhythmia could contribute significantly to preventing damage and subsequent heart disorders. The present research concentrates on using photoplethysmography (PPG) and arterial blood pressure (ABP) with deep convolutional neural networks (CNN) for the classification and detection of fetal cardiac arrhythmia or premature ventricular contractions (PMVCs). The framework for the study entails (Icentia 11k) a public dataset of ECG signals consisting of different cardiac abnormalities. Following this, the weights obtained from the Icentia 11k dataset are transferred to the proposed CNN. Finally, fine-tuning was carried out to improve the accuracy of classification. Results obtained showcase the capacity of the proposed method to detect and classify PMVCs into three types: Normal, P1, and P2 with an accuracy of 99.9%, 99.8%, and 99.5%.

The impact of healthy pregnancy on features of heart rate variability and pulse wave morphology derived from wrist-worn photoplethysmography

Due to the association between dysfunctional maternal autonomic regulation and pregnancy complications, tracking non-invasive features of autonomic regulation derived from wrist-worn photoplethysmography (PPG) measurements may allow for the early detection of deteriorations in maternal health. However, even though a plethora of these features-specifically, features describing heart rate variability (HRV) and the morphology of the PPG waveform (morphological features)-exist in the literature, it is unclear which of these may be valuable for tracking maternal health. As an initial step towards clarity, we compute comprehensive sets of HRV and morphological features from nighttime PPG measurements. From these, using logistic regression and stepwise forward feature elimination, we identify the features that best differentiate healthy pregnant women from non-pregnant women, since these likely capture physiological adaptations necessary for sustaining healthy pregnancy. Overall, morphological features were more valuable for discriminating between pregnant and non-pregnant women than HRV features (area under the receiver operating characteristics curve of 0.825 and 0.74, respectively), with the systolic pulse wave deterioration being the most valuable single feature, followed by mean heart rate (HR). Additionally, we stratified the analysis by sleep stages and found that using features calculated only from periods of deep sleep enhanced the differences between the two groups. In conclusion, we postulate that in addition to HRV features, morphological features may also be useful in tracking maternal health and suggest specific features to be included in future research concerning maternal health.

The 2023 wearable photoplethysmography roadmap

Photoplethysmography is a key sensing technology which is used in wearable devices such as smartwatches and fitness trackers. Currently, photoplethysmography sensors are used to monitor physiological parameters including heart rate and heart rhythm, and to track activities like sleep and exercise. Yet, wearable photoplethysmography has potential to provide much more information on health and wellbeing, which could inform clinical decision making. This Roadmap outlines directions for research and development to realise the full potential of wearable photoplethysmography. Experts discuss key topics within the areas of sensor design, signal processing, clinical applications, and research directions. Their perspectives provide valuable guidance to researchers developing wearable photoplethysmography technology.

Wearable Devices to Diagnose and Monitor the Progression of COVID-19 Through Heart Rate Variability Measurement: Systematic Review and Meta-Analysis

BACKGROUND

Recent studies have linked low heart rate variability (HRV) with COVID-19, indicating that this parameter can be a marker of the onset of the disease and its severity and a predictor of mortality in infected people. Given the large number of wearable devices that capture physiological signals of the human body easily and noninvasively, several studies have used this equipment to measure the HRV of individuals and related these measures to COVID-19.

OBJECTIVE

The objective of this study was to assess the utility of HRV measurements obtained from wearable devices as predictive indicators of COVID-19, as well as the onset and worsening of symptoms in affected individuals.

METHODS

A systematic review was conducted searching the following databases up to the end of January 2023: Embase, PubMed, Web of Science, Scopus, and IEEE Xplore. Studies had to include (1) measures of HRV in patients with COVID-19 and (2) measurements involving the use of wearable devices. We also conducted a meta-analysis of these measures to reduce possible biases and increase the statistical power of the primary research.

RESULTS

The main finding was the association between low HRV and the onset and worsening of COVID-19 symptoms. In some cases, it was possible to predict the onset of COVID-19 before a positive clinical test. The meta-analysis of studies reported that a reduction in HRV parameters is associated with COVID-19. Individuals with COVID-19 presented a reduction in the SD of the normal-to-normal interbeat intervals and root mean square of the successive differences compared with healthy individuals. The decrease in the SD of the normal-to-normal interbeat intervals was 3.25 ms (95% CI -5.34 to -1.16 ms), and the decrease in the root mean square of the successive differences was 1.24 ms (95% CI -3.71 to 1.23 ms).

CONCLUSIONS

Wearable devices that measure changes in HRV, such as smartwatches, rings, and bracelets, provide information that allows for the identification of COVID-19 during the presymptomatic period as well as its worsening through an indirect and noninvasive self-diagnosis.

Assessment of the human response to acute mental stress-An overview and a multimodal study

Numerous vital signs are reported in association with stress response assessment, but their application varies widely. This work provides an overview over methods for stress induction and strain assessment, and presents a multimodal experimental study to identify the most important vital signs for effective assessment of the response to acute mental stress. We induced acute mental stress in 65 healthy participants with the Mannheim Multicomponent Stress Test and acquired self-assessment measures (Likert scale, Self-Assessment Manikin), salivary α-amylase and cortisol concentrations as well as 60 vital signs from biosignals, such as heart rate variability parameters, QT variability parameters, skin conductance level, and breath rate. By means of statistical testing and a self-optimizing logistic regression, we identified the most important biosignal vital signs. Fifteen biosignal vital signs related to ventricular repolarization variability, blood pressure, skin conductance, and respiration showed significant results. The logistic regression converged with QT variability index, left ventricular work index, earlobe pulse arrival time, skin conductance level, rise time and number of skin conductance responses, breath rate, and breath rate variability (F1 = 0.82). Self-assessment measures indicated successful stress induction. α-amylase and cortisol showed effect sizes of -0.78 and 0.55, respectively. In summary, the hypothalamic-pituitary-adrenocortical axis and sympathetic nervous system were successfully activated. Our findings facilitate a coherent and integrative understanding of the assessment of the stress response and help to align applications and future research concerning acute mental stress.

Visible-Blind Narrowband Near-Infrared Photodetector for Precise Real-Time Photoplethysmography Measurement

The visible-blind narrowband photodetector (NPD) with spectral selective sensitivity to near-infrared (NIR) light is an important technology in the field of cardiovascular health assessment. However, the biological information carried by NIR light constantly changes signals with small amplitude and fast speed, which puts high requirements on the performance of detectors. Herein, visible-blind NIR NPDs were constructed by integrating solution-processable films of perovskite, CuSCN, and organic semiconductors. The NIR response was provided by the organic bulk heterojunction (OBHJ) film with a narrow band gap. A thick perovskite layer was applied to screen the incident visible light and suppress the leakage current in the dark state. CuSCN with a high LUMO level blocked the extraction of the visible-light-induced free electrons. The width of the response window was restricted by adjusting the band gap of the perovskite and the donor/acceptor ratio of the OBHJ film. The optimized NIR NPD exhibits a comprehensive performance including visible-blind response, a tunable response spectrum, a high responsivity/detectivity, and a short response time. In practical photoplethysmography measurements, the detector can record the human heart rate in real time through a noninvasive technique and precisely monitor the whole cardiac cycle, which provides an effective method for early detection of cardiovascular symptoms for timely diagnosis and treatment.

Assessment of power spectral density of microvascular hemodynamics in skeletal muscles at very low and low-frequency via near-infrared diffuse optical spectroscopies

In this work, we used a hybrid time domain near-infrared spectroscopy (TD-NIRS) and diffuse correlation spectroscopy (DCS) device to retrieve hemoglobin and blood flow oscillations of skeletal muscle microvasculature. We focused on very low (VLF) and low-frequency (LF) oscillations (i.e., frequency lower than 0.145 Hz), that are related to myogenic, neurogenic and endothelial activities. We measured power spectral density (PSD) of blood flow and hemoglobin concentration in four muscles (thenar eminence, plantar fascia, sternocleidomastoid and forearm) of 14 healthy volunteers to highlight possible differences in microvascular hemodynamic oscillations. We observed larger PSDs for blood flow compared to hemoglobin concentration, in particular in case of distal muscles (i.e., thenar eminence and plantar fascia). Finally, we compared the PSDs measured on the thenar eminence of healthy subjects with the ones measured on a septic patient in the intensive care unit: lower power in the endothelial-dependent frequency band, and larger power in the myogenic ones were observed in the septic patient, in accordance with previous works based on laser doppler flowmetry.

Quantitative analysis of pulse arrival time and PPG morphological features based cuffless blood pressure estimation: a comparative study between diabetic and non-diabetic groups

Pulse arrival time (PAT) and PPG morphological features have attracted much interest in cuffless blood pressure (BP) estimation, but their effects are not clearly understood when vascular characteristics are affected by diseases such as diabetes. This work quantitatively analyzes the effect of diabetic disease on the PAT and PPG morphological features-based BP estimation. We selected 112 diabetic patients and 308 non-diabetic subjects from VitalDB, and extracted 16 features including PAT, PPG morphological features, and heart rate. BP estimation performance was statistically compared between groups using linear regression models with several feature sets, and the relative importance of each feature in the optimal feature set was extracted. As a result, the standard deviation of the error and mean absolute error of PAT-based BP estimation were significantly higher in the diabetic group than in the non-diabetic group (p < 0.01). A feature set containing PAT and PPG morphological features achieved the best performance in both groups. However, the relative importance of each feature for BP estimation differed notably between groups. The results indicate that different features are important depending on the vascular characteristics, which could help to construct different models to accommodate specific diseases.

Face2PPG: An Unsupervised Pipeline for Blood Volume Pulse Extraction From Faces

Photoplethysmography (PPG) signals have become a key technology in many fields, such as medicine, well-being, or sports. Our work proposes a set of pipelines to extract remote PPG signals (rPPG) from the face robustly, reliably, and configurably. We identify and evaluate the possible choices in the critical steps of unsupervised rPPG methodologies. We assess a state-of-the-art processing pipeline in six different datasets, incorporating important corrections in the methodology that ensure reproducible and fair comparisons. In addition, we extend the pipeline by proposing three novel ideas; 1) a new method to stabilize the detected face based on a rigid mesh normalization; 2) a new method to dynamically select the different regions in the face that provide the best raw signals, and 3) a new RGB to rPPG transformation method, called Orthogonal Matrix Image Transformation (OMIT) based on QR decomposition, that increases robustness against compression artifacts. We show that all three changes introduce noticeable improvements in retrieving rPPG signals from faces, obtaining state-of-the-art results compared with unsupervised, non-learning-based methodologies and, in some databases, very close to supervised, learning-based methods. We perform a comparative study to quantify the contribution of each proposed idea. In addition, we depict a series of observations that could help in future implementations.

Non-invasive detection of early microvascular changes in juveniles with type 1 diabetes

AIMS/HYPOTHESIS

The study aimed to assess the usefulness of capillaroscopy and photoplethysmography in the search for early vascular anomalies in children with type 1 diabetes.

METHODS

One hundred sixty children and adolescents aged 6-18, 125 patients with type 1 diabetes, and 35 healthy volunteers were enrolled in the study. We performed a detailed clinical evaluation, anthropometric measurements, nailfold capillaroscopy, and photoplethysmography.

RESULTS

Patients with diabetes had more often abnormal morphology in capillaroscopy (68.60%, p = 0.019), enlarged capillaries (32.6%, p = 0.006), and more often more over five meandering capillaries (20.90%, p = 0.026) compared to healthy controls. Meandering capillaries correlated with higher parameters of nutritional status. In a photoplethysmography, patients with diagnosed neuropathy had a higher percentage of flow disturbance curves (p < 0.001) with a reduced frequency of normal curves (p = 0.050).

CONCLUSIONS

Capillaroscopic and photoplethysmographic examinations are non-invasive, painless, fast, and inexpensive. They are devoid of side effects, and there are no limitations in the frequency of their use and repetition. The usefulness of capillaroscopy and photoplethysmography in the study of microcirculation in diabetic patients indicates the vast application possibilities of these methods in clinical practice.

Estimation of vital signs from facial videos via video magnification and deep learning

The continuous monitoring of vital signs is one of the hottest topics in healthcare. Recent technological advances in sensors, signal processing, and image processing spawned the development of no-contact techniques such as remote photoplethysmography (rPPG). To solve the common problems of rPPG including weak extracted signals, body movements, and generalization with limited data resources, we proposed a dual-path estimation method based on video magnification and deep learning. First, image processes are applied to detect, track, and magnificate facial ROIs automatically. Then, the steady part of the wave of each processed ROI is used for the extraction of features including heart rate, PTT, and features of pulse wave waveform. The blood pressures are estimated from the features via a small CNN. Results comply with the current standard and promise potential clinical applications in the future.

Evaluation of the Photoplethysmogram-Based Deep Learning Model for Continuous Respiratory Rate Estimation in Surgical Intensive Care Unit

The respiratory rate (RR) is a significant indicator to evaluate a patient's prognosis and status; however, it requires specific instrumentation or estimates from other monitored signals. A photoplethysmogram (PPG) is extensively used in clinical environments as well as in intensive care units (ICUs) to primarily monitor peripheral circulation while capturing indirect information about intrathoracic pressure changes. This study aims to apply and evaluate several deep learning models using a PPG for the continuous and accurate estimation of the RRs of patients. The dataset was collected twice for 2 min each in 100 patients aged 18 years and older from the surgical intensive care unit of a tertiary referral hospital. The BIDMC and CapnoBase public datasets were also analyzed. The collected dataset was preprocessed and split according to the 5-fold cross-validation. We used seven deep learning models, including our own Dilated Residual Neural Network, to check how accurately the RR estimates match the ground truth using the mean absolute error (MAE). As a result, when validated using the collected dataset, our model showed the best results with a 1.2628 ± 0.2697 MAE on BIDMC and RespNet and with a 3.1268 ± 0.6363 MAE on our dataset, respectively. In conclusion, RR estimation using PPG-derived models is still challenging and has many limitations. However, if there is an equal amount of data from various breathing groups to train, we expect that various models, including our Dilated ResNet model, which showed good results, can achieve better results than the current ones.

Insights into vascular physiology from sleep photoplethysmography

STUDY OBJECTIVES

Photoplethysmography (PPG) in consumer sleep trackers is now widely available and used to assess heart rate variability (HRV) for sleep staging. However, PPG waveform changes during sleep can also inform about vascular elasticity in healthy persons who constitute a majority of users. To assess its potential value, we traced the evolution of PPG pulse waveform during sleep alongside measurements of HRV and blood pressure (BP).

METHODS

Seventy-eight healthy adults (50% male, median [IQR range] age: 29.5 [23.0, 43.8]) underwent overnight polysomnography (PSG) with fingertip PPG, ambulatory blood pressure monitoring, and electrocardiography (ECG). Selected PPG features that reflect arterial stiffness: systolic to diastolic distance (∆T_norm), normalized rising slope (Rslope) and normalized reflection index (RI) were derived using a custom-built algorithm. Pulse arrival time (PAT) was calculated using ECG and PPG signals. The effect of sleep stage on these measures of arterial elasticity and how this pattern of sleep stage evolution differed with participant age were investigated.

RESULTS

BP, heart rate (HR) and PAT were reduced with deeper non-REM sleep but these changes were unaffected by the age range tested. After adjusting for lowered HR, ∆T_norm, Rslope, and RI showed significant effects of sleep stage, whereby deeper sleep was associated with lower arterial stiffness. Age was significantly correlated with the amount of sleep-related change in ∆T_norm, Rslope, and RI, and remained a significant predictor of RI after adjustment for sex, body mass index, office BP, and sleep efficiency.

CONCLUSIONS

The current findings indicate that the magnitude of sleep-related change in PPG waveform can provide useful information about vascular elasticity and age effects on this in healthy adults.

An Adaptive Filter Based Motion Artifact Cancellation Technique Using Multi-Wavelength PPG for Accurate HR Estimation

This article presents a motion artifact (MA) cancellation technique for accurate photoplethysmography (PPG)-based heart rate (HR) estimation. The MA is canceled using two PPG signals, measured with closely placed red and green LEDs. The proposed technique utilizes the characteristics of the two PPG signals: the high correlation in MA and their different AC/DC ratios. These characteristics allow the MA to be canceled by an adaptive filter while preserving the AC components. In addition, the use of the sign-sign least mean square (SS-LMS) algorithm for the adaptive filter minimizes the hardware resource requirements. To validate the technique, a prototype was implemented and experiments were conducted with six subjects performing three types of movements: walking, running, and squatting. The proposed MA cancellation method significantly reduced the mean absolute error (MAE) in HR estimation, from 9.83 bpm to 1.48 bpm on average, compared to the conventional bandpass filtered green PPG.

Prospective Assessment of the Diagnostic Accuracy of Multi-site Photoplethysmography Pulse Measurements for Diagnosis of Peripheral Artery Disease in Primary Care

Peripheral arterial disease (PAD) is associated with cerebral and coronary artery disease. Symptomatic PAD affects about 5% of people over 55 years; many more have asymptomatic PAD. Early detection enables modification of arterial disease risk factors. Diagnostically, assessment of symptoms or signs can be unreliable; ankle brachial pressure index (ABPI) testing is time-consuming and few healthcare professionals are properly trained. This study assessed the diagnostic accuracy of multi-site photoplethysmography (MPPG), an alternative non-invasive test for PAD, in primary care. PAD patients identified from general practice registers were age- and sex-matched with controls. Participants were assessed using MPPG, ABPI and duplex ultrasound (DUS). Outcome measures were sensitivity and specificity of MPPG and ABPI (relative to DUS) and concordance. MPPG test results were available in 249 of 298 eligible participants from 16 practices between May 2015 and November 2016. DUS detected PAD in 101/249 (40.6%). MPPG sensitivity was 79.8% (95% confidence interval [CI] 69.9-87.6%), with specificity 71.9% (95% CI 63.7-79.2%). ABPI sensitivity was 80.2% (95% CI 70.8-87.6%), with specificity 88.6% (95% CI 82-93.5%). With comparable sensitivity to ABPI, MPPG is quick, automated and simpler to do than ABPI; it offers the potential for rapid and accessible PAD assessments in primary care.

A systematic review of physiological signals based driver drowsiness detection systems

Driving a vehicle is a complex, multidimensional, and potentially risky activity demanding full mobilization and utilization of physiological and cognitive abilities. Drowsiness, often caused by stress, fatigue, and illness declines cognitive capabilities that affect drivers' capability and cause many accidents. Drowsiness-related road accidents are associated with trauma, physical injuries, and fatalities, and often accompany economic loss. Drowsy-related crashes are most common in young people and night shift workers. Real-time and accurate driver drowsiness detection is necessary to bring down the drowsy driving accident rate. Many researchers endeavored for systems to detect drowsiness using different features related to vehicles, and drivers' behavior, as well as, physiological measures. Keeping in view the rising trend in the use of physiological measures, this study presents a comprehensive and systematic review of the recent techniques to detect driver drowsiness using physiological signals. Different sensors augmented with machine learning are utilized which subsequently yield better results. These techniques are analyzed with respect to several aspects such as data collection sensor, environment consideration like controlled or dynamic, experimental set up like real traffic or driving simulators, etc. Similarly, by investigating the type of sensors involved in experiments, this study discusses the advantages and disadvantages of existing studies and points out the research gaps. Perceptions and conceptions are made to provide future research directions for drowsiness detection techniques based on physiological signals.

Evaluation of the effect of photoplethysmograms on workers' exposure to methyl bromide using second derivative

Methyl bromide (MB) is worldwide the only effective fumigant heavily used for quarantine pre-shipment treatment and has a critical use exemption for soil fumigations due to its excellent permeability and insecticidal effect. However, MB should be replaced as it is an an ozone-depleting substance and also highly toxic to humans. Recently, MB has been shown to be hazardous even for asymptomatic workers, affecting their central and autonomic nervous systems. However, the effects of MB exposure on vascular health have not been explored. This study aimed to determine whether MB affects the arterial system of asymptomatic workers. We measured the second derivative of the photoplethysmogram (SDPTG) indices, which are indicators of vascular load and aging, and urinary bromide ion (Br-) concentrations in 44 fumigators (study group) and 20 inspectors (control group) before and after fumigation. In fumigators, the mean values of post-work SDPTG indices (b/a, c/a, d/a, e/a, and SDPTG aging index) and Br- levels were significantly changed compared to their pre-work values (p < 0.05), indicating a negative effect on their cardiovascular health. In contrast, SDPTG indices and Br- levels in inspectors did not show any differences before and after work. All SDPTG indices except c/a showed significant correlations with Br- levels in all individuals (p < 0.05). In conclusion, the Br- levels and SDPTG indices of fumigators varied after MB work, and they experienced negative effects on their health despite being asymptomatic.

Morphological features of the photoplethysmographic signal: a new approach to characterize the microcirculatory response to photobiomodulation

Introduction and Objectives: Advanced analysis of the morphological features of the photoplethysmographic (PPG) waveform may provide greater understanding of mechanisms of action of photobiomodulation (PBM). Photobiomodulation is a non-ionizing, red to near-infrared irradiation shown to induce peripheral vasodilatation, promote wound healing, and reduce pain. Using laser Doppler flowmetry combined with thermal imaging we found previously in a clinical study that PBM stimulates microcirculatory blood flow and that baseline palm skin temperature determines, at least in part, why some individuals respond favorably to PBM while others do not. "Responders" (n = 12) had a skin temperature range of 33°C-37.5°C, while "non-responders" (n = 8) had "cold" or "hot" skin temperature (<33°C or >37.5°C respectively). The continuous PPG signals recorded from the index fingers of both hands in the original clinical study were subjected to advanced post-acquisitional analysis in the current study, aiming to identify morphological features that may improve the accuracy of discrimination between potential responders and non-responders to PBM. Methods: The PPG signals were detrended by subtracting the lower envelope from the raw signal. The Root Mean Square (RMS) and Entropy features were extracted as were two additional morphological features -- Smoothness and number of local extrema per PPG beat (#Extrema). These describe the signal jaggedness and were developed specifically for this study. The Wilcoxon test was used for paired comparisons. Correlations were determined by the Spearman correlation test (rs). Results: The PPG waveforms of responders to PBM had increased amplitude and decreased jaggedness (Baseline vs. 10' post-irradiation: Entropy, 5.0 ± 1.3 vs. 3.9 ± 1.1, p = 0.012; #Extrema, 4.0 ± 1.1 vs. 3.0 ± 1.6, p = 0.009; RMS, 1.6 ± 0.9 vs. 2.3 ± 1.2, p = 0.004; Smoothness, 0.10 ± 0.05 vs. 0.19 ± 0.16, p = 0.016). In addition, unilateral irradiation resulted in a bilateral response, although the response of the contralateral, non-irradiated hand was shorter in duration and lower in magnitude. Although subjects with 'cold,' or 'hot,' baseline skin temperature appeared to have morphologically distinct PPG waveforms, representing vasoconstriction and vasodilatation, these were not affected by PBM irradiation. Conclusion: This pilot study indicates that post-acquisitional analysis of morphological features of the PPG waveform provides new measures for the exploration of microcirculation responsiveness to PBM.

Deep learning classification of systemic sclerosis from multi-site photoplethysmography signals

Introduction: A pilot study assessing a novel approach to identify patients with Systemic Sclerosis (SSc) using deep learning analysis of multi-site photoplethysmography (PPG) waveforms ("DL-PPG"). Methods: PPG recordings having baseline, unilateral arm pressure cuff occlusion and reactive hyperaemia flush phases from 6 body sites were studied in 51 Controls and 20 SSc patients. RGB scalogram images were obtained from the PPG, using the continuous wavelet transform (CWT). 2 different pre-trained convolutional neural networks (CNNs, namely, GoogLeNet and EfficientNetB0) were trained to classify the SSc and Control groups, evaluating their performance using 10-fold stratified cross validation (CV). Their classification performance (i.e., accuracy, sensitivity, and specificity, with 95% confidence intervals) was also compared to traditional machine learning (ML), i.e., Linear Discriminant Analysis (LDA) and K-Nearest Neighbour (KNN). Results: On a participant basis DL-PPG accuracy, sensitivity and specificity for GoogLeNet were 83.1 (72.3-90.9), 75.0 (50.9-91.3) and 86.3 (73.7-94.3)% respectively, and for EfficientNetB0 were 87.3 (77.2-94.0), 80.0 (56.3-94.3) and 90.1 (78.6-96.7)%. The corresponding results for ML classification using LDA were 66.2 (53.9-77.0), 65.0 (40.8-84.6) and 66.7 (52.1-79.2)% respectively, and for KNN were 76.1 (64.5-85.4), 40.0 (19.1-63.9), and 90.2 (78.6-96.7)% respectively. Discussion: This study shows the potential of DL-PPG classification using CNNs to detect SSc. EfficientNetB0 gave an overall improved performance compared to GoogLeNet, with both CNNs performing better than the traditional ML methods tested. Our automatic AI approach, using transfer learning, could offer significant benefits for SSc diagnostics in a variety of clinical settings where low-cost portable and easy-to-use diagnostics can be beneficial.

Validation of Photoplethysmography Using a Mobile Phone Application for the Assessment of Heart Rate Variability in the Context of Heart Rate Variability-Biofeedback

OBJECTIVE

Heart rate variability-biofeedback (HRV-BF) is an effective intervention to reduce stress and anxiety and requires accurate measures of real-time HRV. HRV can be measured through photoplethysmography (PPG) using the camera of a mobile phone. No studies have directly compared HRV-BF supported through PPG against classical electrocardiogram (ECG). The current study aimed to validate PPG HRV measurements during HRV-BF against ECG.

METHODS

Fifty-seven healthy participants (70% women) with a mean (standard deviation) age of 26.70 (9.86) years received HRV-BF in the laboratory. Participants filled out questionnaires and performed five times a 5-minute diaphragmatic breathing exercise at different paces (range, ~6.5 to ~4.5 breaths/min). Four HRV indices obtained through PPG, using the Happitech software development kit, and ECG, using the validated NeXus apparatus, were calculated and compared: RMSSD, pNN50, LFpower, and HFpower. Resonance frequency (i.e., optimal breathing pace) was also compared between methods.

RESULTS

All intraclass correlation coefficient values of the five different breathing paces were "near perfect" (>0.90) for all HRV indices: lnRMSSD, lnpNN50, lnLFpower, and lnHFpower. All Bland-Altman analyses (with just three incidental exceptions) showed good interchangeability of PPG- and ECG-derived HRV indices. No systematic evidence for proportional bias was found for any of the HRV indices. In addition, correspondence in resonance frequency detection was good with 76.6% agreement between PPG and ECG.

CONCLUSIONS

PPG is a potentially reliable and valid method for the assessment of HRV. PPG is a promising replacement of ECG assessment to measure resonance frequency during HRV-BF.

Harmonic components of photoplethysmography and pathological patterns: A cross-sectional study

This study aimed to examine whether the 3 harmonic components (HCs) of photoplethysmography (PTG) - total harmonic distortion (THD), harmonic power (HP), and normalized harmonic amplitude (HA) - have aging effects and may serve as an arterial stiffness marker and examine the relationship between HCs and clinical severity of pathological patterns. This study had a retrospective chart review design, and electronic medical records of 173 female patients (age: 38.57 ± 11.64 years) were reviewed. Patients were asked to complete the phlegm, blood stasis (BS), and food retention (FR) pattern questionnaires and underwent PTG and the second derivative of PTG measurements. THD, HP, and HA data were extracted till the 12th HCs from the raw PTG data. THD and HA had an aging effect (β: -0.179 to -0.278) and were related to b/a (r: -02.76 to -0.455) and d/a (r: 0.265-0.360) of the second derivative of PTG. In the younger group (≤33 years), HP and HA were positively correlated with phlegm, BS, and FR patterns (r: 0.257-0.370), while HP was positively correlated with the FR pattern (r: 0.278-0.315) in the middle age group (34-45 years). In the older group (≥46 years), HP and HA were positively or negatively correlated with the phlegm pattern (r: ±0.263 to ±0.440). HCs may serve as an arterial stiffness marker, and may be partially related to phlegm, BS, and FR patterns. Aging effect needs to be considered when utilizing HCs as an indicator of phlegm, BS, and FR patterns.

Methods for Heart Rate Variability Biofeedback (HRVB): A Systematic Review and Guidelines

Heart Rate Variability Biofeedback (HRVB) has been widely used to improve cardiovascular health and well-being. HRVB is based on breathing at an individual's resonance frequency, which stimulates respiratory sinus arrhythmia (RSA) and the baroreflex. There is, however, no methodological consensus on how to apply HRVB, while details about the protocol used are often not well reported. Thus, the objectives of this systematic review are to describe the different HRVB protocols and detect methodological concerns. PsycINFO, CINALH, Medline and Web of Science were searched between 2000 and April 2021. Data extraction and quality assessment were based on PRISMA guidelines. A total of 143 studies were finally included from any scientific field and any type of sample. Three protocols for HRVB were found: (i) "Optimal RF" (n = 37), each participant breathes at their previously detected RF; (ii) "Individual RF" (n = 48), each participant follows a biofeedback device that shows the optimal breathing rate based on cardiovascular data in real time, and (iii) "Preset-pace RF" (n = 51), all participants breathe at the same rate rate, usually 6 breaths/minute. In addition, we found several methodological differences for applying HRVB in terms of number of weeks, duration of breathing or combination of laboratory and home sessions. Remarkably, almost 2/3 of the studies did not report enough information to replicate the HRVB protocol in terms of breathing duration, inhalation/exhalation ratio, breathing control or body position. Methodological guidelines and a checklist are proposed to enhance the methodological quality of future HRVB studies and increase the information reported.

Clinical Implication of Maumgyeol Basic Service-the 2 Channel Electroencephalography and a Photoplethysmogram-based Mental Health Evaluation Software

Objective

Maumgyeol Basic service is a mental health evaluation and grade scoring software using the 2 channels EEG and photoplethysmogram (PPG). This service is supposed to assess potential at-risk groups with mental illness more easily, rapidly, and reliably. This study aimed to evaluate the clinical implication of the Maumgyeol Basic service.

Methods

One hundred one healthy controls and 103 patients with a psychiatric disorder were recruited. Psychological evaluation (Mental Health Screening for Depressive Disorders [MHS-D], Mental Health Screening for Anxiety Disorders [MHS-A], cognitive stress response scale [CSRS], 12-item General Health Questionnaire [GHQ-12], Clinical Global Impression [CGI]) and digit symbol substitution test (DSST) were applied to all participants. Maumgyeol brain health score and Maumgyeol mind health score were calculated from 2 channel frontal EEG and PPG, respectively.

Results

Participants were divided into three groups: Maumgyeol Risky, Maumgyeol Good, and Maumgyeol Usual. The Maumgyeol mind health scores, but not brain health scores, were significantly lower in the patients group compared to healthy controls. Maumgyeol Risky group showed significantly lower psychological and cognitive ability evaluation scores than Maumgyeol Usual and Good groups. Maumgyel brain health score showed significant correlations with CSRS and DSST. Maumgyeol mind health score showed significant correlations with CGI and DSST. About 20.6% of individuals were classified as the No Insight group, who had mental health problems but were unaware of their illnesses.

Conclusion

This study suggests that the Maumgyeol Basic service can provide important clinical information about mental health and be used as a meaningful digital mental healthcare monitoring solution to prevent symptom aggravation.

Predicting Respiratory Rate from Electrocardiogram and Photoplethysmogram Using a Transformer-Based Model

The respiratory rate (RR) serves as a critical physiological parameter in the context of both diagnostic and prognostic evaluations. Due to the challenges of direct measurement, RR is still predominantly measured through the traditional manual counting-breaths method in clinic practice. Numerous algorithms and machine learning models have been developed to predict RR using physiological signals, such as electrocardiogram (ECG) or/and photoplethysmogram (PPG) signals. Yet, the accuracy of these existing methods on available datasets remains limited, and their prediction on new data is also unsatisfactory for actual clinical applications. In this paper, we proposed an enhanced Transformer model with inception blocks for predicting RR based on both ECG and PPG signals. To evaluate the generalization capability on new data, our model was trained and tested using subject-level ten-fold cross-validation using data from both BIDMC and CapnoBase datasets. On the test set, our model achieved superior performance over five popular deep-learning-based methods with mean absolute error (1.2) decreased by 36.5% and correlation coefficient (0.85) increased by 84.8% compared to the best results of these models. In addition, we also proposed a new pipeline to preprocess ECG and PPG signals to improve model performance. We believe that the development of the TransRR model is expected to further expedite the clinical implementation of automatic RR estimation.

Contactless photoplethysmography for assessment of small fiber neuropathy

Chronic pain is a prevalent condition affecting approximately one-fifth of the global population, with significant impacts on quality of life and work productivity. Small fiber neuropathies are a common cause of chronic pain, and current diagnostic methods rely on subjective self-assessment or invasive skin biopsies, highlighting the need for objective noninvasive assessment methods. The study aims to develop a modular prototype of a contactless photoplethysmography system with three spectral bands (420, 540, and 800 nm) and evaluate its potential for assessing peripheral neuropathy patients via a skin topical heating test and spectral analyses of cutaneous flowmotions. The foot topical skin heating test was conducted on thirty volunteers, including fifteen healthy subjects and fifteen neuropathic patients. Four cutaneous nerve fiber characterizing parameters were evaluated at different wavelengths, including vasomotor response trend, flare area, flare intensity index, and the spectral power of cutaneous flowmotions. The results show that neuropathic patients had significantly lower vasomotor response (50%), flare area (63%), flare intensity index (19%), and neurogenic component (54%) of cutaneous flowmotions compared to the control group, independent of photoplethysmography spectral band. An absolute value of perfusion was 20%-30% higher in the 420 nm band. Imaging photoplethysmography shows potential as a cost-effective alternative for objective and non-invasive assessment of neuropathic patients, but further research is needed to enhance photoplethysmography signal quality and establish diagnostic criteria.

Towards PPG-based anger detection for emotion regulation

BACKGROUND

Anger dyscontrol is a common issue after traumatic brain injury (TBI). With the growth of wearable physiological sensors, there is new potential to facilitate the rehabilitation of such anger in the context of daily life. This potential, however, depends on how well physiological markers can distinguish changing emotional states and for such markers to generalize to real-world settings. Our study explores how wearable photoplethysmography (PPG), one of the most widely available physiological sensors, could be used detect anger within a heterogeneous population.

METHODS

This study collected the TRIEP (Toronto Rehabilitation Institute Emotion-Physiology) dataset, which comprised of 32 individuals (10 TBI), exposed to a variety of elicitation material (film, pictures, self-statements, personal recall), over two day sessions. This complex dataset allowed for exploration into how the emotion-PPG relationship varied over changes in individuals, endogenous/exogenous drivers of emotion, and day-to-day differences. A multi-stage analysis was conducted looking at: (1) times-series visual clustering, (2) discriminative time-interval features of anger, and (3) out-of-sample anger classification.

RESULTS

Characteristics of PPG are largely dominated by inter-subject (between individuals) differences first, then intra-subject (day-to-day) changes, before differentiation into emotion. Both TBI and non-TBI individuals showed evidence of linear separable features that could differentiate anger from non-anger classes within time-interval analysis. However, what is more challenging is that these separable features for anger have various degrees of stability across individuals and days.

CONCLUSION

This work highlights how there are contextual, non-stationary challenges to the emotion-physiology relationship that must be accounted for before emotion regulation technology can perform in real-world scenarios. It also affirms the need for a larger breadth of emotional sampling when building classification models.

From biorepositories to data repositories: Open-access resources accelerate early R&D and validation of equitable diagnostic tools

Diagnostics are critical tools that guide clinical decision-making for patient care and support disease surveillance. Despite its importance, developers and manufacturers often note that access to specimen panels and essential reagents is one of the key challenges in developing quality diagnostics, particularly in low-resource settings. A recent example, as the COVID-19 pandemic unfolded there was a need for clinical samples across the globe to support the rapid development of diagnostics. To address these challenges and gaps, PATH, a global nonprofit, along with its partners collaborated to create a COVID-19 biorepository to improve access to biological samples. Since then, the need for data resources to advance universal rapid diagnostic test (RDT) readers and noninvasive clinical measurement tools for screening children have also been identified and initiated. From biospecimens to data files, there are more similarities than differences in creating open-access repositories. And to ensure equitable technologies are developed, diverse sample panels and datasets are critical in the development process. Here we share one experience in creating open-access repositories as a case study to describe the steps taken, the key factors required to establish a biorepository, the ethical and legal frameworks that guided the initiative and the lessons learned. As diagnostic tools are evolving, more forms of data are critical to de-risk and accelerate early research and development (R&D) for products serving low resource settings. Creating physical and virtual repositories of freely available, well characterized, and high quality clinical and electronic data resources defray development costs to improve equitable access and test affordability.

Monitoring blood pressure and cardiac function without positioning via a deep learning-assisted strain sensor array

Continuous and reliable monitoring of blood pressure and cardiac function is of great importance for diagnosing and preventing cardiovascular diseases. However, existing cardiovascular monitoring approaches are bulky and costly, limiting their wide applications for early diagnosis. Here, we developed an intelligent blood pressure and cardiac function monitoring system based on a conformal and flexible strain sensor array and deep learning neural networks. The sensor has a variety of advantages, including high sensitivity, high linearity, fast response and recovery, and high isotropy. Experiments and simulation synergistically verified that the sensor array can acquire high-precise and feature-rich pulse waves from the wrist without precise positioning. By combining high-quality pulse waves with a well-trained deep learning model, we can monitor blood pressure and cardiac function parameters. As a proof of concept, we further constructed an intelligent wearable system for real-time and long-term monitoring of blood pressure and cardiac function, which may contribute to personalized health management, precise and early diagnosis, and remote treatment.

Wearable Technologies and AI at the Far Edge for Chronic Heart Failure Prevention and Management: A Systematic Review and Prospects

Smart wearable devices enable personalized at-home healthcare by unobtrusively collecting patient health data and facilitating the development of intelligent platforms to support patient care and management. The accurate analysis of data obtained from wearable devices is crucial for interpreting and contextualizing health data and facilitating the reliable diagnosis and management of critical and chronic diseases. The combination of edge computing and artificial intelligence has provided real-time, time-critical, and privacy-preserving data analysis solutions. However, based on the envisioned service, evaluating the additive value of edge intelligence to the overall architecture is essential before implementation. This article aims to comprehensively analyze the current state of the art on smart health infrastructures implementing wearable and AI technologies at the far edge to support patients with chronic heart failure (CHF). In particular, we highlight the contribution of edge intelligence in supporting the integration of wearable devices into IoT-aware technology infrastructures that provide services for patient diagnosis and management. We also offer an in-depth analysis of open challenges and provide potential solutions to facilitate the integration of wearable devices with edge AI solutions to provide innovative technological infrastructures and interactive services for patients and doctors.

Technologies for sleep monitoring at home: wearables and nearables

Sleep is an essential part of our lives and daily sleep monitoring is crucial for maintaining good health and well-being. Traditionally, the gold standard method for sleep monitoring is polysomnography using various sensors attached to the body; however, it is limited with regards to long-term sleep monitoring in a home environment. Recent advancements in wearable and nearable technology have made it possible to monitor sleep at home. In this review paper, the technologies that are currently available for sleep stages and sleep disorder monitoring at home are reviewed using wearable and nearable devices. Wearables are devices that are worn on the body, while nearables are placed near the body. These devices can accurately monitor sleep stages and sleep disorder in a home environment. In this study, the benefits and limitations of each technology are discussed, along with their potential to improve sleep quality.

Performance evaluation of Fitbit Charge 3 and actigraphy vs. polysomnography: Sensitivity, specificity, and reliability across participants and nights

GOAL AND AIMS

Compare the accuracy and reliability of sleep/wake classification between the Fitbit Charge 3 and the Micro Motionlogger actigraph when applying either the Cole-Kripke or Sadeh scoring algorithms. Accuracy was established relative to simultaneous Polysomnography recording. Focus technology: Fitbit Charge 3 and actigraphy. Reference technology: Polysomnography.

SAMPLE

Twenty-one university students (10 females).

DESIGN

Simultaneous Fitbit Charge 3, actigraphy, and polysomnography were recorded over 3 nights at the participants' homes.

CORE ANALYTICS

Total sleep time, wake after sleep onset, sensitivity, specificity, positive predictive value, and negative predictive value.

ADDITIONAL ANALYTICS AND EXPLORATORY ANALYSES

Variability of specificity and negative predictive value across subjects and across nights.

CORE OUTCOMES

Fitbit Charge 3 and actigraphy using the Cole-Kripke or Sadeh algorithms exhibited similar sensitivity in classifying sleep segments relative to polysomnography (sensitivity of 0.95, 0.96, and 0.95, respectively). Fitbit Charge 3 was significantly more accurate in classifying wake segments (specificity of 0.69, 0.33, and 0.29, respectively). Fitbit Charge 3 also exhibited significantly higher positive predictive value than actigraphy (0.99 vs. 0.97 and 0.97, respectively) and a negative predictive value that was significantly higher only relative to the Sadeh algorithm (0.41 vs. 0.25, respectively).

IMPORTANT ADDITIONAL OUTCOMES

Fitbit Charge 3 exhibited significantly lower standard deviation in specificity values across subjects and negative predictive value across nights.

CORE CONCLUSION

This study demonstrates that Fitbit Charge 3 is more accurate and reliable in identifying wake segments than the examined FDA-approved Micro Motionlogger actigraphy device. The results also highlight the need to create devices that record and save raw multi-sensor data, which are necessary for developing open-source sleep or wake classification algorithms.

Functional versus dysfunctional coping with physical pain: An experimental comparison of acceptance vs. avoidance coping

This study compared acceptance vs. avoidance coping with acute physical pain, in a pain-induction experiment and examined both between and within-group differences, multi-methodically and multi-dimensionally using behavioral, physiological and self-report measures. The sample consisted of 88 University students (76.1% females; Mage = 21.33 years). Participants were randomly assigned to four instructed groups and participated twice in the Cold Pressor Task: (a) Acceptance followed by avoidance; (b) Avoidance followed by acceptance; (c) No instructions (control) followed by acceptance, and (d) No instructions (control) followed by avoidance. All analyses were conducted using repeated-measures ANOVAs. Randomized techniques analyses showed that participants receiving no instructions followed by acceptance reported significantly greater changes in physiological and behavioral measures across time. Low adherence to acceptance instructions was found, especially during the first phase. Exploratory analyses on actual techniques used (as opposed to taught technique) showed that participants using avoidance followed by acceptance exhibited significantly greater changes in physiological and behavioral measures across time. No significant differences were found for the self-report of negative affect outcome. Overall, our findings provide support to ACT theory, as participants might have to use firstly ineffective coping to understand what works best to cope with pain. This is the first study examining acceptance vs. avoidance coping both between and within individuals in physical pain, multi-methodically and multi-dimensionally.

PPG Signals-Based Blood-Pressure Estimation Using Grid Search in Hyperparameter Optimization of CNN-LSTM

Researchers commonly use continuous noninvasive blood-pressure measurement (cNIBP) based on photoplethysmography (PPG) signals to monitor blood pressure conveniently. However, the performance of the system still needs to be improved. Accuracy and precision in blood-pressure measurements are critical factors in diagnosing and managing patients' health conditions. Therefore, we propose a convolutional long short-term memory neural network (CNN-LSTM) with grid search ability, which provides a robust blood-pressure estimation system by extracting meaningful information from PPG signals and reducing the complexity of hyperparameter optimization in the proposed model. The multiparameter intelligent monitoring for intensive care III (MIMIC III) dataset obtained PPG and arterial-blood-pressure (ABP) signals. We obtained 75,226 signal segments, with 60,180 signals allocated for training data, 12,030 signals allocated for the validation set, and 15,045 signals allocated for the test data. During training, we applied five-fold cross-validation with a grid-search method to select the best model and determine the optimal hyperparameter settings. The optimized configuration of the CNN-LSTM layers consisted of five convolutional layers, one long short-term memory (LSTM) layer, and two fully connected layers for blood-pressure estimation. This study successfully achieved good accuracy in assessing both systolic blood pressure (SBP) and diastolic blood pressure (DBP) by calculating the standard deviation (SD) and the mean absolute error (MAE), resulting in values of 7.89 ± 3.79 and 5.34 ± 2.89 mmHg, respectively. The optimal configuration of the CNN-LSTM provided satisfactory performance according to the standards set by the British Hypertension Society (BHS), the Association for the Advancement of Medical Instrumentation (AAMI), and the Institute of Electrical and Electronics Engineers (IEEE) for blood-pressure monitoring devices.

Prevalence of sleep apnea in unselected patients with atrial fibrillation by a home-monitoring device: The DAN-APNO study

Background

Sleep apnea (SA), a modifiable risk factor in - atrial fibrillation (AF), is associated with worse outcomes in AF. We aimed to assess the prevalence and severity of SA in patients with AF, and, subsequently, to assess the positive predictive value (PPV) of moderate to severe SA by a home-monitoring device in comparison to cardio-respiratory monitoring (CRM) in consecutive patients with AF.

Methods

This cross-sectional study recruited unselected patients with AF without known SA from an out-patient clinic at Department of Cardiology, Herlev-Gentofte University Hospital. Participants underwent four consecutive nights of sleep-recording with the home-monitoring device NightOwl™ (NO). Moderate SA was defined as an Apnea-Hypopnea Index (AHI) of 15-29 and severe SA as ≥ 30 AHI. Participants with moderate to severe SA was offered CRM for validation of the diagnosis.

Results

We included 126 patients with AF with a median age of 68 (interquartile range: 60-75) years, 42 (33 %) women, 70 (56 %) hypertension, 61 (48 %) hyperlipidemia and 49 (39 %) heart failure. NO detected severe SA in 36 (29 %) of patients with AF, moderate SA in 35 (28 %), mild SA in 45 (36 %) and no SA in 10 (8 %). Of 71 patients with moderate to severe SA by NO, 38 patients underwent CRM and the PPV of NO was 0.82 (31/38) to diagnose moderate SA and 0.92 (22/24) to diagnose severe SA by CRM.

Conclusion

Moderate to severe SA by NO was highly prevalent in patients with AF without known SA. A home-monitoring device such as NO could be an easy and feasible SA screening tool in patients with AF.

Filtering-induced changes of pulse transmit time across different ages: a neglected concern in photoplethysmography-based cuffless blood pressure measurement

Background: Pulse transit time (PTT) is a key parameter in cuffless blood pressure measurement based on photoplethysmography (PPG) signals. In wearable PPG sensors, raw PPG signals are filtered, which can change the timing of PPG waveform feature points, leading to inaccurate PTT estimation. There is a lack of comprehensive investigation of filtering-induced PTT changes in subjects with different ages. Objective: This study aimed to quantitatively investigate the effects of aging and PTT definition on the infinite impulse response (IIR) filtering-induced PTT changes. Methods: One hundred healthy subjects in five different ranges of age (i.e., 20-29, 30-39, 40-49, 50-59, and over 60 years old, 20 subjects in each) were recruited. Electrocardiogram (ECG) and PPG signals were recorded simultaneously for 120 s. PTT was calculated from the R wave of ECG and PPG waveform features. Eight PTT definitions were developed from different PPG waveform feature points. The raw PPG signals were preprocessed then further low-pass filtered. The difference between PTTs derived from preprocessed and filtered PPG signals, and the relative difference, were calculated and compared among five age groups and eight PTT definitions using the analysis of variance (ANOVA) or Scheirer-Ray-Hare test with post hoc analysis. Linear regression analysis was used to investigate the relationship between age and filtering-induced PTT changes. Results: Filtering-induced PTT difference and the relative difference were significantly influenced by age and PTT definition (p < 0.001 for both). Aging effect on filtering-induced PTT changes was consecutive with a monotonous trend under all PTT definitions. The age groups with maximum and minimum filtering-induced PTT changes depended on the definition. In all subjects, the PTT defined by maximum peak of PPG had the minimum filtering-induced PTT changes (mean: 16.16 ms and 5.65% for PTT difference and relative difference). The changes of PTT defined by maximum first PPG derivative had the strongest linear relationship with age (R-squared: 0.47 and 0.46 for PTT difference relative difference). Conclusion: The filtering-induced PTT changes are significantly influenced by age and PTT definition. These factors deserve further consideration to improve the accuracy of PPG-based cuffless blood pressure measurement using wearable sensors.

Novel Multi-Parametric Sensor System for Comprehensive Multi-Wavelength Photoplethysmography Characterization

Photoplethysmography (PPG) is widely used to assess cardiovascular health. However, its usage and standardization are limited by the impact of variable contact force and temperature, which influence the accuracy and reliability of the measurements. Although some studies have evaluated the impact of these phenomena on signal amplitude, there is still a lack of knowledge about how these perturbations can distort the signal morphology, especially for multi-wavelength PPG (MW-PPG) measurements. This work presents a modular multi-parametric sensor system that integrates continuous and real-time acquisition of MW-PPG, contact force, and temperature signals. The implemented design solution allows for a comprehensive characterization of the effects of the variations in these phenomena on the contour of the MW-PPG signal. Furthermore, a dynamic DC cancellation circuitry was implemented to improve measurement resolution and obtain high-quality raw multi-parametric data. The accuracy of the MW-PPG signal acquisition was assessed using a synthesized reference PPG optical signal. The performance of the contact force and temperature sensors was evaluated as well. To determine the overall quality of the multi-parametric measurement, an in vivo measurement on the index finger of a volunteer was performed. The results indicate a high precision and accuracy in the measurements, wherein the capacity of the system to obtain high-resolution and low-distortion MW-PPG signals is highlighted. These findings will contribute to developing new signal-processing approaches, advancing the accuracy and robustness of PPG-based systems, and bridging existing gaps in the literature.

The Principles of Hearable Photoplethysmography Analysis and Applications in Physiological Monitoring-A Review

Not long ago, hearables paved the way for biosensing, fitness, and healthcare monitoring. Smart earbuds today are not only producing sound but also monitoring vital signs. Reliable determination of cardiovascular and pulmonary system information can explore the use of hearables for physiological monitoring. Recent research shows that photoplethysmography (PPG) signals not only contain details on oxygen saturation level (SPO2) but also carry more physiological information including pulse rate, respiration rate, blood pressure, and arterial-related information. The analysis of the PPG signal from the ear has proven to be reliable and accurate in the research setting. (1) Background: The present integrative review explores the existing literature on an in-ear PPG signal and its application. This review aims to identify the current technology and usage of in-ear PPG and existing evidence on in-ear PPG in physiological monitoring. This review also analyzes in-ear (PPG) measurement configuration and principle, waveform characteristics, processing technology, and feature extraction characteristics. (2) Methods: We performed a comprehensive search to discover relevant in-ear PPG articles published until December 2022. The following electronic databases: Institute of Electrical and Electronics Engineers (IEEE), ScienceDirect, Scopus, Web of Science, and PubMed were utilized to conduct the studies addressing the evidence of in-ear PPG in physiological monitoring. (3) Results: Fourteen studies were identified but nine studies were finalized. Eight studies were on different principles and configurations of hearable PPG, and eight studies were on processing technology and feature extraction and its evidence in in-ear physiological monitoring. We also highlighted the limitations and challenges of using in-ear PPG in physiological monitoring. (4) Conclusions: The available evidence has revealed the future of in-ear PPG in physiological monitoring. We have also analyzed the potential limitation and challenges that in-ear PPG will face in processing the signal.

The Impact of Heart Rate Variability Monitoring on Preventing Severe Cardiovascular Events

The increase in the incidence of cardiovascular diseases worldwide raises concerns about the urgent need to increase definite measures for the self-determination of different parameters, especially those defining cardiac function. Heart rate variability (HRV) is a non-invasive method used to evaluate autonomic nervous system modulation on the cardiac sinus node, thus describing the oscillations between consecutive electrocardiogram R-R intervals. These fluctuations are undetectable except when using specialized devices, with ECG Holter monitoring considered the gold standard. HRV is considered an independent biomarker for measuring cardiovascular risk and for screening the occurrence of both acute and chronic heart diseases. Also, it can be an important predictive factor of frailty or neurocognitive disorders, like anxiety and depression. An increased HRV is correlated with rest, exercise, and good recovery, while a decreased HRV is an effect of stress or illness. Until now, ECG Holter monitoring has been considered the gold standard for determining HRV, but the recent decade has led to an accelerated development of technology using numerous devices that were created specifically for the pre-hospital self-monitoring of health statuses. The new generation of devices is based on the use of photoplethysmography, which involves the determination of blood changes at the level of blood vessels. These devices provide additional information about heart rate (HR), blood pressure (BP), peripheral oxygen saturation (SpO²), step counting, physical activity, and sleep monitoring. The most common devices that have this technique are smartwatches (used on a large scale) and chest strap monitors. Therefore, the use of technology and the self-monitoring of heart rate and heart rate variability can be an important first step in screening cardiovascular pathology and reducing the pressure on medical services in a hospital. The use of telemedicine can be an alternative, especially among elderly patients who are associated with walking disorders, frailty, or neurocognitive disorders.

An ML-Based Approach to Reconstruct Heart Rate from PPG in Presence of Motion Artifacts

The heart rate (HR) is a widely used clinical variable that provides important information on a physical user's state. One of the most commonly used methods for ambulatory HR monitoring is photoplethysmography (PPG). The PPG signal retrieved from wearable devices positioned on the user's wrist can be corrupted when the user is performing tasks involving the motion of the arms, wrist, and fingers. In these cases, the obtained HR is altered as well. This problem increases when trying to monitor people with autism spectrum disorder (ASD), who are very reluctant to use foreign bodies, notably hindering the adequate attachment of the device to the user. This work presents a machine learning approach to reconstruct the user's HR signal using an own monitoring wristband especially developed for people with ASD. An experiment is carried out, with users performing different daily life activities in order to build a dataset with the measured signals from the monitoring wristband. From these data, an algorithm is applied to obtain a reliable HR value when these people are performing skill improvement activities where intensive wrist movement may corrupt the PPG.

Heartbeat Detection in Gyrocardiography Signals without Concurrent ECG Tracings

A heartbeat generates tiny mechanical vibrations, mainly due to the opening and closing of heart valves. These vibrations can be recorded by accelerometers and gyroscopes applied on a subject's chest. In particular, the local 3D linear accelerations and 3D angular velocities of the chest wall are referred to as seismocardiograms (SCG) and gyrocardiograms (GCG), respectively. These signals usually exhibit a low signal-to-noise ratio, as well as non-negligible amplitude and morphological changes due to changes in posture and the sensors' location, respiratory activity, as well as other sources of intra-subject and inter-subject variability. These factors make heartbeat detection a complex task; therefore, a reference electrocardiogram (ECG) lead is usually acquired in SCG and GCG studies to ensure correct localization of heartbeats. Recently, a template matching technique based on cross correlation has proven to be particularly effective in recognizing individual heartbeats in SCG signals. This study aims to verify the performance of this technique when applied on GCG signals. Tests were conducted on a public database consisting of SCG, GCG, and ECG signals recorded synchronously on 100 patients with valvular heart diseases. The results show that the template matching technique identified heartbeats in GCG signals with a sensitivity and positive predictive value (PPV) of 87% and 92%, respectively. Regression, correlation, and Bland-Altman analyses carried out on inter-beat intervals obtained from GCG and ECG (assumed as reference) reported a slope of 0.995, an intercept of 4.06 ms (R² > 0.99), a Pearson's correlation coefficient of 0.9993, and limits of agreement of about ±13 ms with a negligible bias. A comparison with the results of a previous study obtained on SCG signals from the same database revealed that GCG enabled effective cardiac monitoring in significantly more patients than SCG (95 vs. 77). This result suggests that GCG could ensure more robust and reliable cardiac monitoring in patients with heart diseases with respect to SCG.

Stretchable Photodiodes with Polymer-Engineered Semiconductor Nanowires for Wearable Photoplethysmography

Healthcare systems worldwide have been stressed to provide sufficient resources to serve the increasing and aging population in our society. The situation became more challenging at the time of pandemic. Technology advancement, especially the adoption of wearable health monitoring devices, has provided an important supplement to current clinical equipment. Most health monitoring devices are rigid, however, human tissues are soft. Such a difference has prohibited intimate contact between the two and jeopardized wearing comfortableness, which hurdles measurement accuracy especially during longtime usage. Here, we report a soft and stretchable photodiode that can conformally adhere onto the human body without any pressure and measure cardiovascular variables for an extended period with higher reliability than commercial devices. The photodiode used a composite light absorber consisting of an organic bulk heterojunction embedded into an elastic polymer matrix. It is discovered that the elastic polymer matrix not only improves the morphology of the bulk heterojunction for obtaining the desired mechanical properties but also alters its electronic band structure and improves the electrical properties that lead to a reduced dark current and enhanced photovoltage in the stretchable photodiode. The work has demonstrated high fidelity measurements and longtime monitoring of heat rate variability and oxygen saturation, potentially enabling next-generation wearable photoplethysmography devices for point-of-care diagnosis of cardiovascular diseases in a more accessible and affordable way.

Two-center validation of Pilot Tone Based Cardiac Triggering of a Comprehensive Cardiovascular Magnetic Resonance Examination

Background

The electrocardiogram (ECG) signal is prone to distortions from gradient and radiofrequency interference and the magnetohydrodynamic effect during cardiovascular magnetic resonance imaging (CMR). Although Pilot Tone Cardiac (PTC) triggering has the potential to overcome these limitations, effectiveness across various CMR techniques has yet to be established.

Purpose

To evaluate the performance of PTC triggering in a comprehensive CMR exam.

Methods

Fifteen volunteers and twenty patients were recruited at two centers. ECG triggered images were collected for comparison in a subset of sequences. The PTC trigger accuracy was evaluated against ECG in cine acquisitions. Two experienced readers scored image quality in PTC-triggered cine, late gadolinium enhancement (LGE), and T1- and T2-weighted dark-blood turbo spin echo (DB-TSE) images. Quantitative cardiac function, flow, and parametric mapping values obtained using PTC and ECG triggered sequences were compared.

Results

Breath-held segmented cine used for trigger timing analysis was collected in 15 volunteers and 14 patients. PTC calibration failed in three volunteers and one patient; ECG trigger recording failed in one patient. Out of 1987 total heartbeats, three mismatched trigger PTC-ECG pairs were found. Image quality scores showed no significant difference between PTC and ECG triggering. There was no significant difference found in quantitative measurements in volunteers. In patients, the only significant difference was found in post-contrast T1 (p = 0.04). ICC showed moderate to excellent agreement in all measurements.

Conclusion

PTC performance was equivalent to ECG in terms of triggering consistency, image quality, and quantitative image measurements across multiple CMR applications.

Study of Echocardiogram Parameters from PPG Signal Using Self-Organized Operational Map-based Network

Two crucial echocardiography parameters -left ventricular ejection fraction (LVEF) and myocardial performance index (MPI) are referred by clinicians to diagnose heart health. Here, an attempt was made to study the possibility of predicting values of LVEF and MPI from Photoplethysmography (PPG) signals. The classification of patients based on the LVEF and MPI values was also evaluated. After PPG signal feature extraction, the Dual Attention-Self Organised Operational Map-LSTM-Conv Network (DASLCN) was used to find the necessary results. Self-organized operational maps (SOOM) helped map the features before sending them to BiLSTM and 1D CNN layers. The results obtained were regression=0.86 with error% of 5.32±8.9 for MPI and accuracy=0.90 & sensitivity=0.89 for LVEF. This technique might help diagnose heart conditions from PPG signals without routine echocardiography.Clinical relevance- PPG is an easy cost-effective portable technique. Whereas, clinical echocardiography is possible only in specialized hospitals. Thus, exploring PPG signals to predict LVEF and MPI values were tried here. This study has been made on whether the grouping of patients based on the range of LVEF and MPI values was possible or not. Newly designed DASLCN helped to perform regression and classification in the same network.

The Use of Botulinum Toxin in Raynaud Phenomenon: A Comprehensive Literature Review

BACKGROUND

Raynaud phenomenon (RP) is a vasospastic condition of the digits that can be primary or secondary to systemic disease. Symptoms are triggered by cold or stress and can cause pain and skin color changes. The chronic ischemia may lead to necrosis, ulceration, and amputation. There are no Food and Drug Administration-approved treatments and cases refractory to pharmacologic and surgical treatments are difficult to control. Local botulinum toxin injections have been increasingly used in the treatment of Raynaud disease and have shown promising results.

AIM OF THE STUDY

To examine the outcomes, techniques, and complications of botulinum toxin use for the treatment of Raynaud disease.

METHODS

The PubMed database was queried using "botulinum toxin" AND "Raynaud phenomenon" as title key words. Preferred reporting items for systematic reviews and meta-analysis criteria were used. Additional articles were selected while reviewing the references of the articles from PubMed. No time restrictions were followed. Articles of all languages were included. Articles were analyzed for study type, demographics, diagnosis/inclusion criteria, treatment methods, outcome measures, length of follow-up, results, and complications. A positive outcome was defined as subjective improvement in symptoms and/or improvement in the outcome measures. A poor outcome was defined as harm done to the patient by the injection that would not have occurred otherwise.

RESULTS

Forty-two clinical studies describing the use of botulinum toxin for Raynaud's phenomenon were found. A total of 425 patients with primary or secondary Raynaud's were treated, with ages ranging from 14 to 91 years. There were 342 women and 81 men, with a female-to-male ratio of 38:9. Outcomes were positive in 96.2% of patients. There were 14.2% of the studies that reported 3.5% of all patients showing no subjective improvement. A single study reported a poor outcome for 1 patient. There were 40.5% of the studies that reported complications, affecting 20.2% of all patients. The most frequently reported complication was transient hand weakness, affecting 44.2% of patients with complications and 8.9% of total patients. Weakness resolved in hours to months after injection. Pain at the injection site lasting minutes to days was reported in 40.7% of patients with complications, and 8.2% of total patients.

CONCLUSIONS

Botulinum toxin treatment for RP is effective. Complications are minor and self-limiting.

Camera-based Cardiovascular Screening based on Heart Rate and Its Variability In Pre- and Post-Exercise Conditions

Analysis of heart rate (HR) and heart rate variability (HRV) in pre- and post-exercise conditions can provide useful information about the health condition of cardiovascular system. Remote photoplethysmography (rPPG) that uses a contactless camera to measure vital signs from the human face might allow for ubiquitous applications in the fitness scenario. This paper benchmarks the accuracy of HR and HRV measured by ECG, PPG and rPPG, and investigates the difference of HR and HRV parameters between individuals with/without the exercise habit in pre- and post-exercise phases. We built a fitness benchmark consisting of 14 healthy subjects to perform running exercise on a treadmill, with video and reference data recorded simultaneously. The results show that rPPG has a similar performance as PPG in both the estimation of HR and HRV. The HRV parameters (Mean IBI, SDNN, LF, VLF, and SD2) of rPPG/PPG show good agreements with the ECG reference. Subjects with a regular exercise habit show lower resting HR and smaller values of HRV parameters in pre-exercise phase, fewer changes in HR and HRV at the same exercise intensity, and faster HR recovery after exercising, as compared with those without an exercise habit. The preliminary results suggest that rPPG is a promising surrogate of PPG for screening HR and HRV before and after exercise, to indicate the performance of cardiac training.

McDAPS: A multi-channel physiological signals display and analysis system for clinical researchers

We introduce McDAPS, an interactive software for assessing autonomic imbalance from non-invasive multi-channel physiological recordings. McDAPS provides a graphical user interface for data visualization, beat-to-beat processing and interactive analyses. The software extracts beat-to-beat RR interval systolic blood pressure, diastolic blood pressure, the pulse amplitude of photoplethysmogram and the pulse-to-pulse interval. The analysis modules include stationary and time-varying power spectral analyses, moving-correlation analysis and univariate analyses. Analyses can also be performed in batch mode if multiple datasets have to be processed in the same way. The program exports results in standard CSV format. McDAPS runs in MATLAB, and is supported on MS Windows and MAC OS systems. The MATLAB source code is available at https://github.com/thuptimd/McDAPS.git.

Physical Artificial Arterial Pulse System for Development and Testing of PPG-Based Sensors

A physical system to generate a PPG-mimicking signal was designed and validated using everyday low-cost components to aid in medical sensor design. The pulse waveform was created by driving a working fluid into a silicone tube and changing the pressure within it. The corresponding waveform mimics a PPG signal through an artery, is adaptable, and repeatable. The working fluid is interchangeable allowing for change of blood analyte concentrations for development and testing of PPG-based sensors. The system was validated by black ink water compared to water and air compared to water testing to confirm optical transparency of the tube. The produced PPG signal, pulse rate and pressure change were compared to that seen in subjects. Optical transparency for 660 nm - 1550 nm wavelengths of light was validated with the signal, pulse rate and total compliance matching subject data. Thus, the system can mimic arterial pulses, creating a valid PPG signal that can be detected by PPG-based sensors.Clinical Relevance- Provides a low-cost, adaptable, physical PPG signal generator for research and development of optical medical sensor technologies.

WebPPG: Feasibility and Usability of Self-Performed, Browser-Based Smartphone Photoplethysmography

Smartphones enable and facilitate biomedical studies as they allow the recording of various biomedical signals, including photoplethysmograms (PPG). However, user engagement rates in mobile health studies are reduced when an application (app) needs to be installed. This could be alleviated by using installation-free web apps. We evaluate the feasibility of browser-based PPG recording, conducting the first usability study on smartphone-based PPG. We present an at-home study using a web app and library for PPG recording using the rear camera and flash. The underlying library is freely made available to researchers. 25 Android users participated, using their own smartphones. The study consisted of a demographic and anamnestic questionnaire, the signal recording itself (60 s), and a consecutive usability questionnaire. After filtering, heart rate was extracted (14/17 successful), signal-to-noise ratios assessed (0.64 ± 0.50 dB, mean ± standard deviation), and quality was visually inspected (12/17 usable for diagnosis). Recording was not supported in 9 cases. This was due to the browser's insufficient support for the flash light API. The app received a System Usability Scale score of 82 ± 9, which is above the 90th percentile. Overall, browser flash light support is the main limiting factor for broad device support. Thus, browser-based PPG is not yet widely applicable, although most participants feel comfortable with the recording itself. The utilization of the user-facing camera might represent a more promising approach. This study contributes to the development of low-barrier, user-friendly, installation-free smartphone signal acquisition. This enables profound, comprehensive data collection for research and clinical practice.Clinical relevance- WebPPG offers low-barrier remote diagnostic capabilities without the need for app installation.

Perfusion index for early identification of regional anesthesia effectiveness: a narrative review

Regional anesthesia (RA) is a common and irreplaceable technique in clinical, which can be used in different surgery sites and control of acute and chronic pain, especially for outpatients, pediatrics and the elderly. RA demands are increasing during COVID-19 pandemic because many surgeries could be performed under RA to reduce the risk of cross-infection between patients and health care workers. Early and accurate identification of the effects of RA can help physicians make timely decisions about whether to supplement analgesics or switch to general anesthesia, which will save time and improve patient satisfaction in a busy operating room. Perfusion index (PI) is a parameter derived from photoplethysmography (PPG) and represents the ratio of pulsatile and non-pulsatile blood flow at monitoring sites. It reflects local perfusion and is mainly affected by stroke volume and vascular tone. With characteristics of non-invasive, rapid, simple, and objective, PI is widely used in clinical practice, such as fluid responsiveness prediction, nociceptive assessment, etc. Recently, many studies have assessed the accuracy of PI in early prediction of RA success, including brachial plexus block, sciatic nerve block, neuraxial anesthesia, paravertebral block, caudal block and stellate ganglion block. Successful RA often parallels increased PI. In this narrative review, we describe the principles and influencing factors of PI, and introduce the effects of PI on early identification of RA effectiveness.