The deep sea is a major sink for microplastic debris

Integrated effects of polymer type, size and shape on the sinking dynamics of biofouled microplastics

Sinking of microplastics (MPs) after biofouling is considered an important mechanisms responsible for the downward transport/sedimentation of MPs in the ocean and freshwaters. Previous studies demonstrated MP sinking caused by an increase in the composite density of MPs after biofouling, while MPs with smaller size or shapes with higher surface area to volume ratios (SA:V), such as films, are speculated to sink faster. In this study, we designed an in situ microcosm to simulate the ambient environmental conditions experienced by floating MPs to elucidate the biofouling and sinking of polyethylene (PE), polypropylene (PP), and expanded-polystyrene (EPS) MPs of various sizes and shapes. Our results showed smaller PE and PP MP granules sank faster than large ones. Even EPS granules of 100 μm diameter, having a much lower density (0.02 mg/mm³) than water, started to sink after 2 weeks of biofouling. Moreover, PE film and fiber MPs with higher SA:V did not sink faster than PE MP granules of the same mass, implying that mechanisms other than SA:V, such as fouling contact area and drag coefficient, play a role in the regulation of biofouling and sinking of MPs.

Marine plastics in Mediterranean islands: Evaluating the distribution and composition of plastic pollution in the surface waters along four islands of the Western Sea Basin

To study the spatial distribution of sea surface plastics in marine protected and non-protected areas, 65 sea surface trawls were carried out using a Hydro-bios manta net coupled with a 335-μm mesh. A total of 19 sampling sites along the coastal waters of Mallorca, the "Parque Nacional Marítimo-Terrestre del Archipiélago de Cabrera" and Menorca in the Balearic Islands as well as along coastal waters of The Natural Park of Columbretes Islands (NW Mediterranean Sea) were sampled. A total of 10,637 plastic items were identified and a subset of these items was categorized by shape, color, size and polymer composition. Plastic particles were found at each sampling site and in all samples. No microscale nor mesoscale variability in floating marine plastics abundance (particles/m²) was encountered throughout the study area where similar values were found in protected areas with no local land-based contamination sources, such as Columbretes [0.04 (±0.03) particles/m²], and in high anthropized areas, such as the island of Mallorca [0.04 (±0.07) particles/m²]. However, differences were found in characteristics of plastic items (shape, polymer, and size range), with the protected area of Columbretes characterized by the presence of the highest density of very small plastic items composed mainly of fragments (93%). Quantified plastics from the marine environment were composed mainly of polyethylene (PE, 63.3%), polypropylene (PP; 24.9%), polycarbonate (PC; 4.6%) and polystyrene (PS, 3.3%). The polymer composition showed a homogenous composition between islands and differences were detected only amongst Columbretes and the other islands. Results from this study provide further evidence of the ubiquity of plastics in the marine environment and highlight that remote and protected areas, such as Columbretes, are not exempt from plastic pollution, but receptor areas for small and aged floating plastics composed mainly by fragments, which might have potentially harmful effects on protected ecosystems.

Occurrence of Natural and Synthetic Micro-Fibers in the Mediterranean Sea: A Review

Among microplastics (MPs), fibers are one of the most abundant shapes encountered in the aquatic environment. Growing attention is being focused on this typology of particles since they are considered an important form of marine contamination. Information about microfibers distribution in the Mediterranean Sea is still limited and the increasing evidence of the high amount of fibers in the aquatic environment should lead to a different classification from MPs which, by definition, are composed only of synthetic materials and not natural. In the past, cellulosic fibers (natural and regenerated) have been likely included in the synthetic realm by hundreds of studies, inflating “micro-plastic” counts in both environmental matrices and organisms. Comparisons are often hampered because many of the available studies have explicitly excluded the micro-fibers (MFs) content due, for example, to methodological problems. Considering the abundance of micro-fibers in the environment, a chemical composition analysis is fundamental for toxicological assessments. Overall, the results of this review work provide the basis to monitor and mitigate the impacts of microfiber pollution on the sea ecosystems in the Mediterranean Sea, which can be used to investigate other basins of the world for future risk assessment.

Spatial distribution of microplastics in volcanic lake water and sediments: Relationships with depth and sediment grain size

Microplastics (plastics <5 mm) are globally widespread pollutants of aquatic ecosystems. As microplastics contaminate both water and sediments, research on their spatial distribution in these different environmental matrices has increased. However, fresh waters are poorly studied and even less so are lentic ecosystems. To contribute filling this knowledge gap, this study analyses the distribution of microplastics in the water column and surface sediments of a volcanic lake, namely Lake Bracciano. Furthermore, it analyses in more detail the relationship between the concentration of microplastics in sediments, its grain size and the sampling depth (i.e. nearshore or deep). Water and sediment sampling was carried out in different sectors of the lake (northern, eastern, southern, western) using a plankton net and a van Veen grab sampler, respectively. Two sediment samples were collected at each station in order to analyse the abundance of microplastic and to perform grain size analysis. Results show a mean concentration of 2.4 items m^-3 in water and 42 items kg^-1 in sediments. The distribution of microplastics is uneven between the different sampling stations, with the northern sector being the most contaminated in both matrices. The chemical composition and shape of microplastics vary between water and sediment. In particular, polyethylene terephthalate and polyvinyl chloride are the most abundant polymers in water and sediments, respectively. Fibres are the main shape of microplastics in water while fragments are more abundant in sediments. In-depth analysis of sediment shows that sediments from deep stations are more contaminated than nearshore samples and have more fragment-shaped microplastics than fibre-shaped ones. Furthermore, there is a significant positive correlation between the concentration of microplastics and the abundance of silt, confirming data emerging from the scientific literature on marine and lotic ecosystems.

Surface water, sediment, and biota: The first multi-compartment analysis of microplastics in the Karnafully river, Bangladesh

The Karnafullly River, which flows through Chattogram and falls into the Bay of Bengal, Bangladesh, is vulnerable to microplastic contamination. In this study, we looked at microplastics in the Karnafully River's surface water (5 sites), sediment (9 sites), and biota (4 species). Microplastic concentrations ranged from 0.57 ± 0.07 to 6.63 ± 0.52 items/L in surface water, 143.33 ± 3.33 to 1240 ± 5.77 items/kg dry weight in sediment, and 5.93 ± 0.62 to 13.17 ± 0.76 items/species in biota. A significant difference (P < 0.05) was found in the concentration of MPs in the Karnafully River's sediment, biota, and surface water. High percentage of fiber-shaped and small-sized MPs (<1 mm) were detected throughout the samples. Water and sediment MPs were often transparent/white and blue, whereas biota MPs were mostly black and red, indicating a color preference during biological uptake. The Bay of Bengal received 61.3 × 10⁹ microplastic items per day. The feeding zone of biota influenced the level of microplastics, with a trend of pelagic > demersal > benthic > benthopelagic. Polyethylene and polyethylene terephthalate were the most abundant polymer. Using the average fish intake rate in Bangladesh, we computed a possible consumption of 4015-7665 items of MPs/person/year.

Can we quantify the aquatic environmental plastic load from aquaculture?

Aquaculture provides livelihoods for hundreds of millions of people, but it also forms a significant source of plastic litter that poses a serious hazard to aquatic ecosystems. How to assess and subsequently manage plastic loads from aquaculture is a pending and pressing issue for aquaculture sustainability, and an important concern for water environment monitoring and management. In this study, we developed the first framework for estimating plastic litter from aquaculture by combining data from satellite remote sensing, drones, questionnaires, and in situ measurements. By acquiring multidimensional (human and nature) and multiscale (centimeter to basin scale) data, this framework helped us understand the aquaculture farming patterns and its spatial and temporal evolution, and thus estimate the plastic load it generates and suggest effective management approaches. Applying this framework, we assessed the marine plastic load from oyster floating raft farming in the Maowei Sea, a typical mariculture bay in China, with an increasing farming area. Approximately 3840 tons of plastic waste is expected to be discharged into the sea in the next four years (the average service life of a floating raft) without improvements in aquaculture waste management. Strengthening governance, timely plastic removal, innovative replacement, and transforming farmers' behavior patterns are recommended as the subsequent measures for plastic management. This framework can be extended to other regions and other aquaculture patterns, and is applicable to local, regional, and global aquaculture plastic litter assessments. It is a source-based method for evaluating plastic pollution that is more conducive to subsequent plastic management than traditional post-contamination environmental monitoring. In the context of the global expansion of mariculture and the global commitment to action to combat plastic pollution, this approach could play a critical role in the investigation and management of plastic waste in aquatic environments.

Microplastics cause neurotoxicity and decline of enzymatic activities in important bioturbator Hediste diversicolor

Microplastics (MPs) tend to accumulate in marine sediments thus benthic fauna is particularly vulnerable to microplastic pollution. Hediste diversicolor is a widespread species in coastal marine sediments. It plays key ecological functions mostly related to bioturbation process which means sediment reworking due to the worm burrowing activity and building a network of galleries. Herein, we show that commercial plastic microspheres of two sizes (63-75 and 300-355 μm) have the potential to cause neurotoxicity in H. diversicolor. The whole-body acetylcholinesterase (AChE) activity - a common indicator of neurotoxic effect - was on average 60% lower in polychaetes exposed for 28 days to MPs served at environmentally relevant concentrations (0.08% sediment d. wt.), than in unexposed ones. Significantly reduced activities of antioxidant enzymes (SOD, CAT, GST) indicated suppression of the cellular antioxidative system in worms exposed to MPs. No changes were, however, observed in tGSH, lipid or protein oxidation measures (CBO, MDA), and in the energetic value of these polychaetes. The response was generally similar with no regard to MPs size. Only very few microspheres were found in polychaetes exposed to MPs spiked sediment. The potential role of MPs-associated pollutants as a factor responsible for observed biochemical effects, is discussed.

Characteristics and distribution of microplastics in shoreline sediments of the Yangtze River, main tributaries and lakes in China-From upper reaches to the estuary

Microplastics (MPs) pervade the environment and increasingly threaten both natural ecosystems and human health. In this study, we investigated MP particle concentrations in sediment samples collected from 54 sites along the banks of the Yangtze River and its major tributaries and on lakeshores. The main polymer types found in the samples were polypropylene (PP), polystyrene (PS) and polyethylene (PE). MP particle abundance in the various types of locations was 35-51,968 particles/kg dry weight (d.w.) on the banks of the main river, 52-1463 particles/kg (d.w.) on the banks of tributaries and 2574-23,685 particles/kg (d.w.) on lakeshores. Correlation between MP abundance and mean annual runoff of each upstream tributary was significant, which suggests that increased runoff brings more microplastic waste to streambank sediments. The most common shape of MP particles in all upstream samples was flake, and in downstream samples it was foam. Small microplastic particles (< 0.50 mm) were predominant at all sites in this study, and the minimum particle size in samples from the Yangtze river banks was 0.065 mm. Average abundance of MP particles on the shores of the source lake was 9069 particles/kg around the inlet but only 866 particles/kg around the outlet; the difference was due to interception associated with sedimentation and precipitation in the lake. Our study represents the large-scale study of MPs contamination in sediment along the Yangtze River and provides important data regarding the accumulation and distribution of MPs in shoreline sediments of the upper, middle and lower reaches of the Yangtze River, main tributaries and lakes in China.

Assessment, characterization, and quantification of microplastics from river sediments

Microplastic (MP), as a pollutant, is currently posing a biological hazard to the aquatic environment. The study aims to isolate, quantify, and characterize the MP pollutants in sediment samples from 14 study sites at Kaveri River, Killa Chinthamani, Tiruchirappalli, South India. With Sediment-MP Isolation (SMI) unit, density separation was done with a hydrogen peroxide solution. Four forms of MPs namely, fragments, films, foams, and fibers with orange, white, green, and saffron red were observed. The plenitude and distribution of four forms of MPs and natural substrates were geometrically independent, with large amounts of microfragments within the research region accounting for 79.72% variation by Principal Component Analysis. FT-IR analyses of MPs showed the presence of polyamide, polyethylene, polyethylene glycol, polyethylene terephthalate, polypropylene, and polystyrene. Additionally, the scanning electron microscopic analysis revealed that the MPs have differential surface morphology with rough surfaces, porous structures, fissures, and severe damage. Most MPs comprised Si, Mg, Cu, and Al, according to energy dispersive X-ray analyses. The combined SMI, instrumental analyses and evaluation (heat map) of MPs in river sediments help assess contamination levels and types of MPs. The findings might provide an insight into the status of MPs in Kavery River sediments that could help in formulating regulations for MPs reduction and contamination in rivers eventually to protect the environment.

An appraisal of early stage biofilm-forming bacterial community assemblage and diversity in the Arabian Sea, India

The community composition and distribution of early-stage (24 h) biofilm-forming bacteria on two different surfaces (glass slide and polystyrene plastic slide) at three different locations (Diu, Alang and Sikka) were studied using a culture-dependent and next-generation sequencing (NGS) approach in the Arabian Sea, Gujarat, India. The most dominant phyla observed using the NGS approach were the Proteobacteria among the sampling sites. Gammaproteobacteria class dominated both the surfaces among the sites and accounted for 46.7% to 89.2% of total abundance. The culture-dependent analysis showed Proteobacteria and Firmicutes as the dominant phyla on the surfaces within the sampling sites. During the initial colonization, hydrocarbon-degrading bacterial strains have also attached to the surfaces. The outcome of this study would be of great importance for targeting the early stage biofilm-forming and hydrocarbon-degrading bacterial isolates may help to degrade plastic in the marine environment.

Plastisphere community assemblage of aquatic environment: plastic-microbe interaction, role in degradation and characterization technologies

It is undeniable that plastics are ubiquitous and a threat to global ecosystems. Plastic waste is transformed into microplastics (MPs) through physical and chemical disruption processes within the aquatic environment. MPs are detected in almost every environment due to their worldwide transportability through ocean currents or wind, which allows them to reach even the most remote regions of our planet. MPs colonized by biofilm-forming microbial communities are known as the ''plastisphere". The revelation that this unique substrate can aid microbial dispersal has piqued interest in the ground of microbial ecology. MPs have synergetic effects on the development, transportation, persistence, and ecology of microorganisms. This review summarizes the studies of plastisphere in recent years and the microbial community assemblage (viz. autotrophs, heterotrophs, predators, and pathogens). We also discussed plastic-microbe interactions and the potential sources of plastic degrading microorganisms. Finally, it also focuses on current technologies used to characterize those microbial inhabitants and recommendations for further research.

Characteristics of Microplastics and Their Affiliated PAHs in Surface Water in Ho Chi Minh City, Vietnam

Microplastic pollution has become a worldwide concern. However, studies on the distribution of microplastics (MPs) from inland water to the ocean and their affiliated polycyclic aromatic hydrocarbons (PAHs) are still limited in Vietnam. In this study, we investigated the distribution of MPs and PAHs associated with MPs in canals, Saigon River, and Can Gio Sea. MPs were found at all sites, with the highest average abundance of MPs being 104.17 ± 162.44 pieces/m³ in canals, followed by 2.08 ± 2.22 pieces/m³ in the sea, and 0.60 ± 0.38 pieces/m³ in the river. Fragment, fiber, and granule were three common shapes, and each shape was dominant in one sampling area. White was the most common MP color at all sites. A total of 13 polymers and co-polymers were confirmed, and polyethylene, polypropylene, and ethylene-vinyl acetate were the three dominant polymers. The total concentration of MPs-affiliated PAHs ranged from 232.71 to 6448.66, from 30.94 to 8940.99, and from 432.95 to 3267.88 ng/g in Can Gio sea, canals, and Saigon River, respectively. Petrogenic sources were suggested as a major source of PAHs associated with MPs in Can Gio Sea, whereas those found in Saigon River and canals were from both petrogenic and pyrogenic sources.

Automatic quantification and classification of microplastics in scanning electron micrographs via deep learning

Microplastics quantification and classification are demanding jobs to monitor microplastic pollution and evaluate the potential health risks. In this paper, microplastics from daily supplies in diverse chemical compositions and shapes are imaged by scanning electron microscopy. It offers a greater depth and finer details of microplastics at a wider range of magnification than visible light microscopy or a digital camera, and permits further chemical composition analysis. However, it is labour-intensive to manually extract microplastics from micrographs, especially for small particles and thin fibres. A deep learning approach facilitates microplastics quantification and classification with a manually annotated dataset including 237 micrographs of microplastic particles (fragments or beads) in the range of 50 μm-1 mm and fibres with diameters around 10 μm. For microplastics quantification, two deep learning models (U-Net and MultiResUNet) were implemented for semantic segmentation. Both significantly outmatched conventional computer vision techniques and achieved a high average Jaccard index over 0.75. Especially, U-Net was combined with object-aware pixel embedding to perform instance segmentation on densely packed and tangled fibres for further quantification. For shape classification, a fine-tuned VGG16 neural network classifies microplastics based on their shapes with high accuracy of 98.33%. With trained models, it takes only seconds to segment and classify a new micrograph in high accuracy, which is remarkably cheaper and faster than manual labour. The growing datasets may benefit the identification and quantification of microplastics in environmental samples in future work.

Challenging the highstand-dormant paradigm for land-detached submarine canyons

Sediment, nutrients, organic carbon and pollutants are funnelled down submarine canyons from continental shelves by sediment-laden flows called turbidity currents, which dominate particulate transfer to the deep sea. Post-glacial sea-level rise disconnected more than three quarters of the >9000 submarine canyons worldwide from their former river or long-shore drift sediment inputs. Existing models therefore assume that land-detached submarine canyons are dormant in the present-day; however, monitoring has focused on land-attached canyons and this paradigm remains untested. Here we present the most detailed field measurements yet of turbidity currents within a land-detached submarine canyon, documenting a remarkably similar frequency (6 yr^-1) and speed (up to 5-8 ms^-1) to those in large land-attached submarine canyons. Major triggers such as storms or earthquakes are not required; instead, seasonal variations in cross-shelf sediment transport explain temporal-clustering of flows, and why the storm season is surprisingly absent of turbidity currents. As >1000 other canyons have a similar configuration, we propose that contemporary deep-sea particulate transport via such land-detached canyons may have been dramatically under-estimated.

Oceanic plastic pollution caused by Danish seine fishing in Norway

Wear and tear on fishing gear is a sparsely investigated source of microplastic pollution in the sea. In Norway, Danish seine ropes and trawls are the fishing gears that contribute most to this pollution. The main reason for this pollution is that the seine ropes are dragged along the seabed over a considerable distance, creating a friction force that results in high ropes wear. This note reports the findings after examining the wear of Danish seine ropes used in Norwegian fisheries. The results show that, in Norway alone, an average of 77 to 97 tons of plastic will be added to the sea annually due to this specific fishing gear. Aggregated to include all fly dragging, anchor seining, and pair seining globally, this number is estimated to be about 311 tons per year.

Polystyrene microplastics induce mitochondrial damage in mouse GC-2 cells

Microplastics are widely distributed, such as oceans, rivers and the atmosphere, with many opportunities for human exposure and potential health risks. Polystyrene microplastic (PS-MPS) exposure has been found to cause sperm damage to mice; however, the mechanism by which this happens remains unclear. Here, GC-2 cells, a mouse spermatocyte line, were exposed to 5 µm PS-MPS to investigate mitochondrial damage. The results showed that 5 µm PS-MPS decreased ATP content, reduced the mitochondrial membrane potential, damaged the integrity of the mitochondrial genome, and caused an imbalance of homoeostasis between mitochondrial division and fusion. The mitochondrial PINK1/Parkin autophagy pathway was activated. Time-series analysis revealed that PS-MPS damaged the mitochondrial structure through cellular oxidative stress, and mitochondrial function was maintained to some extent after PS-MPS damage. This study revealed the mitochondrial toxicity of polystyrene microplastics, thus providing a basis for understanding the causes of sperm damage by polystyrene microplastics.

Emerging microplastics in the environment: Properties, distributions, and impacts

Microplastics (MPs) are emerging and recalcitrant micropollutants in the environment, which have attracted soaring interests from a wide range of research disciplines. To this end, numerous technologies have been devised to understand the properties, environmental behaviors, and potential impacts/hazards of MPs. Herein, we present a review on the properties, environmental distribution and possible impacts. In this review, a comprehensive introduction of the most universal types of MPs, their shapes and characters will be first presented. Then the distributions of MPs in the environment and the impacts on microbe, plants, and human will be reported. Finally, major challenges and directions will be discussed to provide some clues to the better understanding, control and migration of MPs pollution in future studies.

Microplastics distribution in bottom sediments of the Baltic Sea Proper

An abundance of microplastics particles (0.2-5 mm, MPs) in bottom sediments is analyzed based on 53 samples (3 to 215 m deep) obtained in 8 cruises of research vessels across the Baltic Sea Proper in March-October 2015-2016. MPs content varied between stations from 103 up to 10,179 items kg^-1 d.w., with the bulk mean of 863 ± 1371 items kg^-1 d.w., showing a statistically significant increase with water depth. As many as 74.5% of MPs are of fibrous shape, followed by films (19.8%) and fragments (5.7%). The distributions of fibres, fragments, films, and different types of natural bottom sediments are significantly different, highlighting the specific behaviour of each of these kinds of bottom deposits. A statistically significant correlation between water depth and fibres content is found. Based on the analysis of oceanographic factors and sedimentological principles, an erosion/transition/accumulation pattern for fibres in the Baltic Sea Proper is outlined. Fibres can be considered as a specific type of "synthetic sediment", while principles of distribution of other MPs are not yet certain.

Enrichment of polystyrene microplastics induces histological damage, oxidative stress, Keap1-Nrf2 signaling pathway-related gene expression in loach juveniles (Paramisgurnus dabryanus)

Polystyrene microplastics (PS-MPs, particle size<5 mm) cause great harm to aquatic organisms. However, their precise effects are not completely understood. In China, placing plastic film at the pond bottom has become an important loach aquaculture mode. In this mode, MPs will affect loach health. This study investigated the enrichment of PS-MPs and its effects on the growth, liver histomorphology, antioxidant enzymes, and Keap1-Nrf2 signaling pathway-related gene expression in loach juveniles (Paramisgurnus dabryanus). The loach juveniles were raised at the concentration of 1000 μg/L fluorescent polystyrene microplastics (PS-MPs) with particle size of 0.5 µm or 5 µm for seven days, the results showed that fluorescent PS-MPs were found to be enriched in liver, intestine, and gill, and the enrichment amount was higher in liver than in gill and intestine (P < 0.05). Furthermore, the enrichment amount of different-sized PS-MPs was different in liver, gill, and intestine. The loach juveniles were cultured for 21 days in the water of the concentration of 100 or 1000 μg/L PS-MPs with particle size of 0.5 µm or 5 µm, the results showed that the survival rate, weight gain rate, and specific growth rate of loach juveniles were significantly reduced. The histological analysis revealed that PS-MPs caused liver damage. The activities of superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GSH-PX), and acetylcholinesterase (AChE) were decreased with the extended exposure to PS-MPs. Generally, the expressions of Nrf2 and Keap1 showed the similar change trend. From 7-14 day, the expression trend of oxidative stressed-related genes was not completely consistent with that of Nrf2 gene, but on day 21, the gene expression trend of oxidative stress-related SOD, CAT, and GSH-PX in the downstream of Keap1-Nrf2 signaling pathway was roughly consistent with that of Nrf2 gene. Basically, the change trends of these three gene expression were similar to those of their corresponding enzyme activities. This study provides theoretical basis for the toxicological effects of PS-MPs on freshwater fish.

Underwater hidden microplastic hotspots: Historical ocean dumping sites

Three ocean dumping sites located in the Yellow Sea (YS) and East Sea (ES) of South Korea have accumulated terrestrial waste from 1988 to 2015. Most of this waste comprised industrial wastewater and sewage sludge, which are sources of microplastics. In this study, we investigated the spatiotemporal distribution and characteristics of microplastics in surface and core sediments of the YS, South Sea (SS) and ES, including at dumping sites (YDP and EDP). The mean abundance of microplastics in surface sediments was ranked in order of EDP (59,457 ± 49,130 particles/kg d.w.), ES (5,047 ± 9,404 particles/kg d.w.), YDP (3,965 ± 3,213 particles/kg d.w.), SS (314 ± 488 particles/kg d.w.) and YS (288 ± 400 particles/kg d.w.). EDP and YDP showed about 14- and 12-fold higher microplastic abundances, and more diverse polymer compositions, than the ES and YS, respectively. The historical trend of microplastic pollution in age-dated core sediments from EDP and YDP aligned well with the amount of historical ocean dumping. As the level of ocean dumping has gradually reduced since 2006, and was finally banned in 2015, the microplastic abundance decreased accordingly. Interestingly, spherical polystyrene (PS) primary microplastic was the dominant type in EDP sediments (78%) and other surface sediments in the ES (52%). More than 60 million tons of sewage and wastewater sludge were dumped at EDP, and extremely high abundances of up to 130,000 particles/kg d.w. were observed in EDP surface sediments. PS primary microplastics were continuously present in the EDP and ES sediment cores in the dumping period and are suspected to have originated from industrial wastewater sludge. The particle transportation model results showed that PS was dispersed throughout the ES during ocean dumping. In addition, deep circulation can contribute to the dispersion of particles after sinking. These results indicate that ocean dumping sites represent an underwater hotspot and source of microplastics in seafloor sediments.

Extending the theory of planned behaviour to investigate the issue of microplastics in the marine environment

The attention to microplastics and the consequences of its presence in the marine environment is increasing in scientific fields as well as on common media channels. In the absence of regulation in many countries, manufacturers are not required to exclude microplastic from their products, however consumers could force the production in a more sustainable direction with their choices. This study demonstrates the utility of the Theory of Planned Behaviour (TPB) in understanding the publics' intention to avoid buying products which contain microplastics. All three TPB antecedents of intentions are important. The study, based on a sample of respondents in NSW (Australia), also reveals respondents' habitual behaviour of avoiding buying products containing microplastics strongly predicts their intended future behaviour. Last, modelling reveals direct and indirect means through which intentions to avoid buying microplastics can be increased, via increased environmental concerns and public knowledge and health concerns about microplastics.

Fishing in troubled waters: Limited stress response to natural and synthetic microparticles in brown shrimp (Crangon crangon)

Marine invertebrates inhabiting estuaries and coastal areas are exposed to natural suspended particulate matter (SPM) like clay or diatom shells but also to anthropogenic particles like microplastics. SPM concentrations may reach 1 g per liter and more, comprising hundreds of millions of items in the size range of less than 100 μm. Suspension feeders and deposit feeders involuntarily ingest these particles along with their food. We investigated whether natural and anthropogenic microparticles at concentrations of 20 mg L^-1, which correspond to natural environmental SPM concentrations in coastal marine waters, are ingested by the brown shrimp Crangon crangon and whether these particles induce an oxidative stress response in digestive gland tissue. Shrimp were exposed to clay, silica, TiO₂, polyvinyl chloride (PVC), or polylactide microplastics (PLA) for 6, 12, 24, and 48 h, respectively. The activities of the anti-oxidative enzymes superoxide dismutase (SOD), glutathione peroxidase (GPx), and glutathione reductase (GR) were measured. All five particle types were ingested by the shrimp along with food. The presence of the particles in the shrimp stomach was verified by scanning electron microscopy. The activities of the anti-oxidative enzymes did not vary between animals exposed to different types of microparticles and control animals that did not receive particles. The temporal activity differed between the three enzymes. The lack of a specific biochemical response may reflect an adaptation of C. crangon to life in an environment where frequent ingestion of non-digestible microparticles is unavoidable and continuous maintenance of inducible biochemical defense would be energetically costly. Habitat characteristics as well as natural feeding habits may be important factors to consider in the interpretation of hazard and species-specific risk assessment.

An assessment workflow to recover microplastics from complex biological matrices

A criteria-guided workflow was applied to assess the effectiveness of microplastic separation methods on complex marine biological matrices. Efficacy of four methods (nitric acid, HNO₃, and potassium hydroxide, KOH, digestions, and sodium chloride, NaCl, and potassium iodide, KI, density flotations) was evaluated on four taxa (hard coral, sponge, sea squirt, sea cucumber) using five microplastics (polyethylene, polystyrene, polyethylene terephthalate, PET, polyvinylchloride, rayon). Matrix clarification was only unacceptably low for KOH. PET discoloured regardless of reagent. Rayon threads unravelled into monofilaments after exposure to all reagents, with discolouration also occurring with HNO₃. Recovery rates were overall high, except for dense microplastics treated with NaCl and only KI yielded high rayon recovery efficiency. All polymers were accurately assigned, with subtle spectral changes observed. These results demonstrate specific limitations to separation methods applied to different biological matrices and microplastics and highlight the need to assess their suitability to provide estimates of microplastic contamination.

Microplastics in the tissues of commercial semi-intensive shrimp pond-farmed Litopenaeus vannamei from the Gulf of California ecoregion

The omnipresence of microplastics (MPs) in marine and coastal environments has attracted attention owing to their effects on various organisms, including humans. We present the first study of MPs in the gastrointestinal tract (GT), gills (GI), and exoskeleton (EX) of the farmed whiteleg shrimp Litopenaeus vannamei from commercial aquaculture facilities in northwestern Mexico that have operated semi-intensively for the last two decades. We found that the number of MP items per tissue was 7.6 ± 0.6 in the GT, 6.3 ± 0.9 in the GI, and 4.3 ± 0.9 in the EX, with an average of 18.5 ± 1.2 MP items per shrimp (1.06 items/g, wet weight [ww]). MP concentrations were 261.7 ± 84.5, 13.1 ± 1.8, and 2.6 ± 0.6 items/g (ww) in the GT, GI, and EX, respectively. Microplastics ranged from 30 to 2800 μm in size (360 ± 39 μm) with fibers (∼90.8%), filament-shape (∼93.4%), and transparent (∼47.7%) being the most common ones. Polyethylene (∼54.5%) and polyamide (∼24.2%) were the most commonly identified polymers, although polyesters (∼12.1%), polystyrene (∼6.1%), and nylon (∼3.0%) were also found. The abundance of MPs in farmed L. vannamei may be related to their feeding habits and the availability of MP sources in aquaculture facilities.

Can microplastics facilitate the emergence of infectious diseases?

Plastic pollution is a major environmental problem. Small plastic particles (called microplastics) have been reported to have pernicious effects on human and wildlife health, by altering physiological functions (e.g., immunity, metabolism) and interfering with commensal microorganisms. However, in addition to these direct toxic effects, we suggest that microplastic pollution might also exert deleterious effects, modifying (i) the exposure to pathogens (e.g., multi-drug resistant bacteria) and (ii) the dynamics of vector-borne diseases. Therefore, we argue that microplastics should be considered as a ubiquitous environmental hazard, potentially promoting the (re)emergence of infectious diseases. The implementation of multi- and interdisciplinary research projects are crucial to properly evaluate if microplastic pollution should be added to the current list of global health threats.

Interactions of microplastics and main pollutants and environmental behavior in soils

Microplastics (MPs) are emerging global contaminants, attracting more and more attention because of their difficulty in degradation, extensive and persistent pollution. In freshwater environment, especially in the ocean, they have become a global, public and even political research hotspot. However, the distribution, fate and ecological hazards of MPs in agricultural land and other soils have not been explored fully. Although the occurrence of MPs in different habitats has been reviewed at home and abroad, little attention has been paid to its environmental behavior, ecotoxicology and interaction with biological and chemical pollutants in soil. This review summaries the research progress on the source, accumulation, degradation and migration of MPs in soil, the potential risks of ecological environment and food chain. In order to provide theoretical basis and practical suggestions for related research and regulatory countermeasures, the detection and treatment methods and mechanism of microplastics in soil need to be further explored.

Environmental contamination by microplastics originating from textiles: Emission, transport, fate and toxicity

Microplastic (MP) pollution has become a global concern in terms of its environmental abundance and potential detrimental effects. Fibrous microplastics (FMPs) released from synthetic textiles are believed to contribute significantly to environmental MP pollution. This review provides an overview of current knowledge relating to the environmental impact of FMPs through a summary and discussion of (1) the concentrations in different environmental compartments including water, soil and air, (2) emission from wastewater treatment plants: via effluent discharges to waters and via sludge to land, (3) environmental transport and fate, and (4) toxicity and associated effects. How the properties of FMPs influence these aspects is discussed and their behaviour is compared to MPs of other shapes. We have summarised the Environmental Concentrations and derived Predicted No-Effect Concentrations for a preliminary risk assessment of FMPs by extrapolating the risk quotient for each respective environmental compartment. The uncertainties surrounding current assessment methods are discussed. In particular we address the need to improve determination of exposure levels and to better characterise the effects of FMPs. We conclude by presenting topics for future studies to address, which will improve our still limited understanding of the interactions between FMPs and the environment.

Microfiber fallout during dining and potential human intake

The pervasiveness of microfibers, including fibrous microplastics indoors and outdoors, has drawn attention. However, some places such as the dining environment that are closely related to human diet and health have been neglected. Here, we characterized short-term microfiber fallout in different dining spots and conducted long-term monitoring in a college cafeteria. The results showed that the microfiber abundance of restaurants during the peak hour of dinnertime (75 ± 19 MFs/plate/meal) was approximately two times that of households (36 ± 23 MFs/plate/meal). The high microfiber abundance was positively correlated with strong human activities (i.e., sitting rate of people) in restaurants, which was verified by the kinetics data of the cafeteria (R² =0.871, p = 0.000). Cotton (63%), polyester (17%), and rayon (14%) were the top three detected microfibers via μ-FTIR, and cloth friction can aggravate fiber shedding significantly. Moreover, high hairiness and short staple yarn style were likely to increase the formation of microfibers. Additionally, room structure can obviously influence microfiber abundance that households without separate dining rooms showed three times higher microfiber abundance (66 MFs/plate/meal) than those (21 MFs/plate/meal) with separate dining rooms, because partition walls were verified to effectively reduce fiber transport. Collectively, microfiber fallout during dining deserves our great attention, which may induce human intake of 63-232 MFs/person/d.

Microplastics in the Deep: Comparing Dietary and Plastic Ingestion Data between Two Mediterranean Bathyal Opportunistic Feeder Species, Galeus melastomus, Rafinesque, 1810 and Coelorinchus caelorhincus (Risso, 1810), through Stomach Content Analysis

Marine plastic pollution is currently an issue of mounting concern around the world. Stomach content of marine fish has been increasingly used as a valid proxy for detecting the presence of such a pollutant in marine biota, both for coastal and deep-water environments. Although ingestion of microplastics has been reported in an increasing number of species, the patterns of ingestion still remain unclear, depending closely on the interaction between the species and types of microplastics involved. In this context, we analysed and compared the stomach contents of two bathyal dwelling opportunistic feeder species namely Galeus melastomus and Coelorinchus caelorhincus. In particular, we analysed microplastic items according to their dimension, morphology and colour, and diet’s variation with size obtained through prey identification. Both species showed a higher frequency of occurrence of the blue filament-like middle-sized microplastics (1.01–4.75 mm) compared with the other categories, although this pattern was much more marked in C. caelorhincus than in G. melastomus. The latter conversely showed a larger array of ingested plastic items in terms of shape and colour. Matching plastic ingestion with dietary data suggested potential predator confusion occurring in C. caelorhincus through active mis-selection of a defined type of microplastic instead of some particular family of polychaetes, which resemble in shape, size, and color to that type. Otherwise, G. melastomus appeared more prone to a random ingestion of a larger array of microplastic items because of a more generalistic and less selective feeding strategy. Although further validation is needed, stomach contents of the two species showed evidence strong enough to be considered as potential bioindicator species of microplastic pollution, as required by the Marine Strategy Framework Directive for monitoring this pollutant in the marine environment.

Detection of plastic particles in marine sponges by a combined infrared micro-spectroscopy and pyrolysis-gas chromatography-mass spectrometry approach

Plastic pollution threatens the marine environment, especially due to the adverse effects caused by micro and nano particles interacting with the marine biota. In order to provide reliable data regarding micro and nanoplastic contamination and the related impacts, efficient analytical solutions are needed. We developed a new analysis workflow that uses marine sponges to monitor plastic pollution by characterizing the plastic particles accumulated in their tissue. Specimens of cf. Haliclona (Haplosclerida) were sampled in the Maldivian archipelago. The aim was to optimize the method and to carry out a pilot study of the contamination of the related reef habitat. Particles were isolated, size fractioned, counted and submitted to morphological and chemical characterization. The constituting polymer was identified by infrared microspectroscopy for particles >25 μm, and by pyrolysis coupled with gas chromatography mass spectrometry for those <25 μm. Method recoveries were between 87 and 83% and limits of quantitation (LOQs) were between 6.6 and 30.2 ng/g. Analyses showed that 70% of the sponges presented plastic contamination, with an average of 1.2 particles/g tissue for the 25-150 μm size range, and a total plastic concentration of up to 4.8 μg/g in the 0.2-25 μm size range, with polyolefin being the most represented polymer in both size ranges. Overall, the study demonstrated the reliability of the proposed analytical workflow and of the use of sponges as biosamplers for plastic particles.

Large quantities of small microplastics permeate the surface ocean to abyssal depths in the South Atlantic Gyre

Hundreds of studies have surveyed plastic debris in surface ocean gyre and convergence zones, however, comprehensive microplastics (MPs, ≤5 mm) assessments beneath these surface accumulation areas are lacking. Using in situ high-volume filtration, Manta net and MultiNet sampling, combined with micro-Fourier-transform-infrared imaging, we discovered a high abundance (up to 244.3 pieces per cubic meter [n m^-3 ]) of small microplastics (SMPs, characteristically <100 μm) from the surface to near-sea floor waters of the remote South Atlantic Subtropical Gyre. Large horizontal and vertical variations in the abundances of SMP were observed, displaying inverse vertical trends in some cases. SMP abundances in pump samples were more than two orders of magnitude higher than large microplastics (LMPs, >300 μm) concurrently collected in MultiNet samples. Higher-density polymers (e.g., alkyd resins and polyamide) comprised >65% of the total pump sample count, highlighting a discrepancy between polymer compositions from previous ocean surface-based surveys, typically dominated by buoyant polymers such as polyethylene and polypropylene. Contrary to previous reports stating LMP preferentially accumulated at density gradients, SMP with presumably slower sinking rates are much less influenced by density gradients, thus resulting in a more even vertical distribution in the water column, and potentially longer residence times. Overall, our findings suggest that SMP is a critical and largely underexplored constituent of the oceanic plastic inventory. Additionally, our data support that weak current systems contribute to the formation of SMP hotspots at depth, implying a higher encounter rate for subsurface particle feeders. Our study unveils the prevalence of plastics in the entire water column, highlighting the urgency for more quantification of the deep-ocean MP, particularly the smaller size fraction, to better understand ecosystem exposure and to predict MP fate and impacts.

A large-scale study of microplastic abundance in sediment cores from the UK continental shelf and slope

To inform risk assessments, reliable, time efficient and affordable quantification methods are required for creating a microplastic (MP) pollution baseline in the world's oceans. To facilitate this, MP abundance was investigated in sediments of three contrasting areas of the UK continental shelf: North West of Jones Bank, the Canyons in the Celtic Sea and Dogger Bank in the North Sea, utilising the Nile Red tagging method to assess its time efficiency and cost. Average MP abundance in the top 10 cm was 1050-2700 MP kg^-1. MP abundance decreased with increasing sediment depth and increased with increasing water depth. The findings emphasise the extent of MP pollution and illustrate the value of Nile Red for large scale mapping at relatively low cost.

The role of mesopelagic fishes as microplastics vectors across the deep-sea layers from the Southwestern Tropical Atlantic

Microplastics (MPs; <5 mm) are a macro issue recognised worldwide as a threat to biodiversity and ecosystems. Widely distributed in marine ecosystems, MPs have already been found in the deep-sea environment. However, there is little information on ecological mechanisms driving MP uptake by deep-sea species. For the first time, this study generates data on MP contamination in mesopelagic fishes from the Southwestern Tropical Atlantic (SWTA) to help understand the deep-sea contamination patterns. An alkaline digestion protocol was applied to extract MPs from the digestive tract of four mesopelagic fish species: Argyropelecus sladeni, Sternoptyx diaphana (Sternoptychidae), Diaphus brachycephalus, and Hygophum taaningi (Myctophidae). A total of 213 particles were recovered from 170 specimens, and MPs were found in 67% of the specimens. Fibres were the most common shape found in all species, whereas polyamide, polyethylene, and polyethylene terephthalate were the most frequent polymers. The most contaminated species was A. sladeni (93%), and the least contaminated was S. diaphana (45%). Interestingly, individuals caught in the lower mesopelagic zone (500-1000 m depth) were less contaminated with MPs than those captured in the upper mesopelagic layer (200-500 m). Our results highlight significant contamination levels and reveal the influence of mesopelagic fishes on MPs transport in the deep waters of the SWTA.

Are the seafloors of marine protected areas sinks for marine litter? Composition and spatial distribution in Cabrera National Park

The seafloors of oceans and seas are becoming major sinks for marine litter (ML) at a global scale and especially within the Mediterranean Sea. Within global oceans and seas, Marine Protected Areas (MPAs) have been established to protect and conserve marine habitats and increase marine biodiversity. In this study, extensive coastal shallow scuba diving surveys were conducted in 2019 and 2020 to identify the distribution of ML in the MPA of Cabrera Marine-Terrestrial National Park (Cabrera MPA) in the Balearic Islands. Approximately 900 items weighing 70.1 kg were collected throughout the MPA during the underwater surveys. Glass bottles, including pieces (25-30%) and glass or ceramic fragments >2.5 cm (8-19%) were the most common identified items followed by plastic food containers and plastic bags (~8%). Overall, 75% of the abundance of collected ML was observed during the first year. In terms of the protection status of the different locations, similar abundances of ML were found in public access areas and no-take areas. Additionally, no significant differences were identified according to location indicating that ML on the seafloor was homogeneous within the studied shallow coastal areas. Overall, the results indicate that Cabrera MPA is a hotspot for ML and mitigation actions and measures, such as annual cleaning efforts, can help to prevent and minimize ML accumulation on the seafloor.

Microplastics Risk into a Three-Link Food Chain Inside European Hake

Microplastics (MPs) are increasing in the marine environment as well as inside marine organisms, having an important effect on biological diversity. The trophic transfer of MPs was demonstrated under laboratory conditions, but this study is based on the analysis of preys found in stomach contents. MPs from Merluccius merluccius individuals caught in the Cantabrian Sea and preys inside their guts (blue whiting, and northern krill inside blue whiting) were analyzed. MPs with different chemical composition occurred inside every hake and their preys, with different damages, from aquatic life hazards with long lasting effects, to allergic skin reactions and respiratory irritation, not only for aquatic species and fishing resources, but also for humans through hake consumption. The similarity of MPs profiles from gills and seawater samples would support seawater as the main source of gill microplastics. The MPs profile of hake GIT was similar to that of hake preys inside. Despite the small sample size, the presence of MPs in all the tissues analyzed of hakes and their preys, together with the evidence of hazard compositions of some of them, highlights the need for policies and actions to reduce plastic and microplastic production and consumption.

Occurrence and characteristics of microplastics in fish of the Han River, South Korea: Factors affecting microplastic abundance in fish

This study examined the abundance of microplastics (MPs) in 106 fish from 22 species inhabiting three sites of the Han River, South Korea. In total, 1753 MPs from 106 fish samples were identified with an average abundance of 15.60 ± 13.45 MPs per individual fish (MPs indiv^-1) in the North Han River, 16.35 ± 12.32 MPs indiv^-1 in the South Han River, and 20.14 ± 10.01 MPs indiv^-1 in downstream of the Han River, indicating that the fish in the downstream of the Han River was the most contaminated by MPs. The dominant size of MPs detected in fish ranged between 0.1 and 0.2 mm, and the most common polymer types found in fish were polypropylene (PP) (≥40%) and polyethylene (PE) (≥23%), followed by polytetrafluoroethylene (PTFE) (≥16%) at all sampling locations. A significant correlation was observed between the log-transformed number of MPs with log-transformed fish length (p < 0.01) and with log-transformed fish weight (p < 0.01). The Kruskal-Wallis test disclosed a significant difference in the number of MPs among the feeding habits (p < 0.01), indicating that omnivorous and insectivorous fish contained more MPs than carnivorous and herbivorous fish. In addition, fish habitat result showed that pelagic fish contained a higher level of MPs than demersal fish, but no significant differences in the number of MPs among fish habitats were observed (p > 0.05).

Flocculation with heterogeneous composition in water environments: A review

Flocculation is a key process for controlling the fate and transport of suspended particulate matter (SPM) in water environments and has received considerable attention in the field of water science (e.g., oceanography, limnology, and hydrology), remaining an active area of research. The research on flocculation has been conducted to elucidate the SPM dynamics and to diagnose various environmental issues. The flocculation, sedimentation, and transportation of SPM are closely linked to the compositional and structural properties of flocs. In fact, flocs are highly heterogeneous in terms of composition. However, the lack of comprehensive research on floc composition and structure has led to misconceptions regarding the temporal and spatial dynamics of SPM. This review summarizes the current understanding of the heterogeneous composition of flocs (e.g., minerals, organic matter, metals, microplastic, engineered nanoparticles) and its effect on their structure and on their fate and transport within aquatic environments. Furthermore, the effects of human activities (e.g., pollutant discharge, construction) on floc composition are discussed.

Pervasive occurrence of microplastics in Hudson-Raritan estuary zooplankton

Microplastics (MP) are considered emerging contaminants in the water environment, and there is an interest in understanding their entry into the food web. As a growing body of literature demonstrates the ingestion of MP by zooplankton in controlled laboratory studies, few data are available demonstrating in situ observations of MP in zooplankton. A field survey was performed to collect zooplankton in the highly urbanized Hudson-Raritan estuary. Following washing, sorting by species, and enumeration, three dominant species of copepods (Acartia tonsa, Paracalanus crassirostris and Centropages typicus) were digested. MP were filter concentrated and characterized by size, morphology, and color via microscopy and polymer type by micro-FTIR imaging and/or Raman spectroscopy. MP were observed in all extracts performed on the three copepod species with averages ranging from 0.30 to 0.82 MP individual^-1. Polyethylene and polypropylene were the dominant polymer types observed and fragments and beads the most commonly observed morphologies for MP. These data were used to estimate the flux of MP through zooplankton based on gut turnover times, which we compare to estimates of MP entering this environment though the local waterways. The estimated fluxes were sufficiently large, indicating that ingestion by zooplankton is a major sink of MP in the size range subject to zooplankton feeding in surface estuarine waters.

Ingestion of microplastics by commercial fish species from the southern Black Sea coast

Microplastic (MP) contamination is a serious threat to today's marine life. Therefore, this study investigates MP ingestion in three commercial fish species (European anchovy Engraulis encrasicolus, whiting Merlangius merlangus, and red mullet Mullus barbatus) from the Turkish coast of the Black Sea. Ninety-five MPs were detected in all examined fish (371). Fiber forms were detected in the majority of cases based on the MP morphology. Polyethylene and polypropylene were the most dominant polymer type. The mean of ingested MPs was found as 0.15 ± 0.04, 0.28 ± 0.06, 0.40 ± 0.07 in anchovy, whiting and red mullet, respectively. The size of the MPs ranged from 118 μm and 4854 μm. The MP waste was detected in each species, and the highest MP amount was determined in the red mullet, which was significantly higher than European anchovy. The present study's data might be a baseline on the ecological risk assessment of MPs in the fish and future experimental studies on the fish species living in the Black Sea.

Are We Underestimating Anthropogenic Microfiber Pollution? A Critical Review of Occurrence, Methods, and Reporting

Anthropogenic microfibers, a ubiquitous environmental contaminant, can be categorized as synthetic, semisynthetic, or natural according to material of origin and production process. Although natural fibers, such as cotton and wool, originated from natural sources, they often contain chemical additives, including colorants (e.g., dyes, pigments) and finishes (e.g., flame retardants, antimicrobial agents, ultraviolet light stabilizers). These additives are applied to textiles during production to give textiles desired properties like enhanced durability. Anthropogenically modified "natural" and semisynthetic fibers are sufficiently persistent to undergo long-range transport and accumulate in the environment, where they are ingested by biota. Although most research and communication on microfibers have focused on the sources, pathways, and effects of synthetic fibers in the environment, natural and semisynthetic fibers warrant further investigation because of their abundance. Because of the challenges in enumerating and identifying natural and semisynthetic fibers in environmental samples and the focus on microplastic or synthetic fibers, reports of anthropogenic microfibers in the environment may be underestimated. In this critical review, we 1) report that natural and semisynthetic microfibers are abundant, 2) highlight that some environmental compartments are relatively understudied in the microfiber literature, and 3) report which methods are suitable to enumerate and characterize the full suite of anthropogenic microfibers. We then use these findings to 4) recommend best practices to assess the abundance of anthropogenic microfibers in the environment, including natural and semisynthetic fibers. By focusing exclusively on synthetic fibers in the environment, we are neglecting a major component of anthropogenic microfiber pollution. Environ Toxicol Chem 2022;41:822-837. © 2021 SETAC.

Temporal Variability of Microparticles Under the Seattle Aquarium, Washington State: Documenting the Global Covid-19 Pandemic

Anthropogenic debris including microparticles (<5 mm) are ubiquitous in marine environments. The Salish Sea experiences seasonal fluctuations in precipitation, river discharge, sewage overflow events, and tourism-all variables previously thought to have an impact on microparticle transport and concentrations. Our goals are two-fold: 1) describe long-term microparticle contamination data including concentration, type, and size; and 2) determine if seasonal microparticle concentrations are dependent on environmental or tourism variables in Elliott Bay, Salish Sea. We sampled 100 L of seawater at a depth of approximately 9 m at the Seattle Aquarium, Seattle, Washington State, United States, approximately every two weeks from 2019 through 2020 and used an oil extraction protocol to separate microparticles. We found that microparticle concentrations ranged from 0 to 0.64 particles L^-1 and fibers were the most common type observed. Microparticle concentrations exhibited a breakpoint on 10 April 2020, where estimated slope and associated microparticle concentration significantly declined. Further, when considering both environmental as well as tourism variables, temporal microparticle concentration was best described by a mixed-effects model, with tourism as the fixed effect and the person counting microparticles as the random effect. Although monitoring efforts presented set out to identify effects of seasonality and interannual differences in microparticle concentrations, it instead captured an effect of decreased tourism due to the global Covid-19 pandemic. Long-term monitoring is critical to establish temporal microparticle concentrations and to help researchers understand if there are certain events, both seasonal and sporadic (e.g., rain events, tourism, or global pandemics), when the marine environment is more at risk from anthropogenic pollution. Environ Toxicol Chem 2022;41:917-930. © 2021 Seattle Aquarium. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Occurrence of microplastics (MPs) in the gastrointestinal tract of fishes: A global systematic review and meta-analysis and meta-regression

The presence of Microplastics (MPs) in food has become a global health concern in the last two decades. In this study, an attempt was made to obtain articles about the occurrence of MPs in the gastrointestinal tract (gt) of fishes using searching the Scopus and PubMed databases from 1 January 1990 to 10 August 2021. The occurrence of MPs was meta-analyzed using the random effect model (REM). The results indicate that pooled occurrence of MPs in gastrointestinal of fishes was 2.76 P/gt: 95%CI:2.65-2.86 P/gt. Occurrence MPs in gastrointestinal of fishes in closed water sources (5.86 P/gt) was higher than free water sources (2.46 P/gt). In addition, the rank order of water sources based on occurrence MPs in gastrointestinal of fish was Lake (5.50 P/gt) > Estuary (5.46 P/gt) > River (2.91 P/gt) > Bay (2.85 P/gt) > Sea (2.58 P/gt) > Ocean (1.29 P/gt). The lowest and highest occurrence MPs in gastrointestinal of fishes were observed in high-income economies (1.45 P/gt) and low-income economies (8.08 P/gt), respectively. The higher frequency of color in MPS was related to blue with polyethylene-type polymers. Therefore, control plans to reduce the occurrence of MPs in fishes is recommended.

Distribution and environmental risk assessment of microplastics in continental shelf sediments in the southern East China Sea: A high-spatial-resolution survey

We report a high-spatial-resolution study on the distributions, characteristics, and environmental risks of microplastics in surface sediments of the southern East China Sea. Microplastics were omnipresent in the sediments (concentration range: 53.3-246.7; mean: 138.4 particles/kg dry-weight sediment) and enriched in nearshore areas close to urban centers relative to lower offshore concentrations. The microplastics identified were dominated by polyethylene (41.2%) and polyethylene terephthalate (19.9%) in polymer type, fibers (45.8%) and fragments (40.3%) in shape, 0.1-0.5 mm (61.0%) in size, and black (52.0%) in color. The benthic environment experienced low to moderate microplastic pollution, with polyvinylchloride exhibiting the highest ecological risk index. The high-resolution sampling revealed highly diverse polymer types and strongly patchy distributions of microplastic abundance and pollution indices in sediments. Results from this study imply that complex physical, biological, and topographic interactions control the distribution of microplastics and the associated environmental risks in coastal sediments.

Lagrangian Modeling of Marine Microplastics Fate and Transport: The State of the Science

Microplastics pollution has led to irreversible environmental consequences and has triggered global concerns. It has been shown that water resources and marine food consumers are adversely affected by microplastics due to their physico-chemical characteristics. This study attempts to comprehensively review the structure of four well-known Lagrangian particle-tracking models, i.e., Delft3D—Water Quality Particle tracking module (D-WAQ PART), Ichthyoplankton (Ichthyop), Track Marine Plastic Debris (TrackMPD), and Canadian Microplastic Simulation (CaMPSim-3D) in simulating the fate and transport of microplastics. Accordingly, the structure of each model is investigated with respect to addressing the involved physical transport processes (including advection, diffusion, windage, beaching, and washing-off) and transformation processes (particularly biofouling and degradation) that play key roles in microplastics’ behavior in the marine environment. In addition, the effects of the physical properties (mainly size, diameter, and shape) of microplastics on their fate and trajectories are reviewed. The models’ capabilities and shortcomings in the simulation of microplastics are also discussed. The present review sheds light on some aspects of microplastics’ behavior in water that were not properly addressed in particle-tracking models, such as homo- and hetero-aggregation, agglomeration, photodegradation, and chemical and biological degradation as well as additional advection due to wave-induced drift. This study can be regarded as a reliable steppingstone for the future modification of the reviewed models.

Systematical insights into distribution and characteristics of microplastics in near-surface waters from the East Asian Seas to the Arctic Central Basin

The spatial distribution and composition of microplastics in near-surface water (8 m) was investigated from the East Asian Seas to the Arctic Central Basin. Microplastics were detected in 93.9% of the sampling sites. Abundances ranged from 0.48 to 7.62 items/m³, with an average abundance of 2.91 ± 1.93 items/m³. The highest average abundance was observed in the Arctic Central Basin. Polyester (PET) was the dominant type, accounting for 71.3% of total microplastics, followed by rayon or cellophane and polytetrafluoroethylene (PTFE). Microplastics < 2 mm accounted for 81.9% of total particles. Its distribution peaked in the 1-2 mm size range. The 0.30-2 mm fibers were the most abundant. In the East Asian Seas, the abundance was significantly negatively correlated with longitude, whereas the accumulation of microplastics was not observed in the northeastern sector of Japan Sea. Abundances of microplastics at sites located in the sub-Arctic and Arctic Oceans showed a significant positive relationship with latitude, indicating that the Arctic Ocean is a potential accumulation zone of microplastics. The findings of this study will provide systematical insights into distribution of microplastics and basic information for understanding the accumulation mechanism of microplastics in near-surface waters from the East Asian Seas to the Arctic Central Basin.

Physical and anthropogenic drivers shaping the spatial distribution of microplastics in the marine sediments of Chilean fjords

Several studies have focused on the presence and distribution of microplastics within the water column of coastal waters, but the dynamics of these particles in sediments have received little attention. Here we examine the concentrations and characteristics of microplastics in sediment samples collected from 35 stations within the Inner Sea of Chiloé, Chilean Patagonia. Current velocity, grain size, intensity of salmon farming activities, and human population density were all evaluated as factors potentially explaining concentrations and distribution of microplastic particles within these sediments. Microplastics were detected in all samples, with the highest abundance represented by fibers (88%), fragments (10%) and films (2%). Across the sampled sites, microplastic concentrations averaged 72.2 ± 32.4 (SD) items per kg dw (dry weight) sediment, with the principal polymers identified as polyethylene terephthalate (PET), acrylic, polypropylene (PP) and polyurethane (PUR). Approximately 40% of the variability in distribution and abundance of microplastics was explained by current velocity combined with proximity and intensity of local salmon production activities. SYNOPSIS: Marine currents and aquaculture intensity explain abundance and dynamics of microplastics in marine sediments.

A Low-Cost Microfluidic Method for Microplastics Identification: Towards Continuous Recognition

Plastic pollution has emerged as a growing concern worldwide. In particular, the most abundant plastic debris, microplastics, has necessitated the development of rapid and effective identification methods to track down the stages and evidence of the pollution. In this paper, we combine low-cost plastic staining technologies using Nile Red with the continuous feature offered by microfluidics to propose a low-cost 3D printed device for the identification of microplastics. It is observed that the microfluidic devices indicate comparable staining and identification performance compared to conventional Nile Red staining processes while offering the advantages of continuous recognition for long-term environmental monitoring. The results also show that concentration, temperature, and residency time possess strong effects on the identification performance. Finally, various microplastics have been applied to further demonstrate the effectiveness of the proposed devices. It is found that, among different types of microplastics, non-spherical microplastics show the maximal fluorescence level. Meanwhile, natural fibers indicate better staining quality when compared to synthetic ones.

Where does marine litter hide? The Providencia and Santa Catalina Island problem, SEAFLOWER Reserve (Colombia)

The SEAFLOWER Biosphere Reserve (SBR) is the largest Marine Protected Area in the Caribbean Sea and the second largest in Latin America. Marine protected areas are under pressure from various stressors, one of the most important issues being pollution by marine litter, especially plastic. In this study our aim is to establish the distribution pattern and potential sources of solid waste in the different marine/coastal ecosystems of the islands of Providencia and Santa Catalina (SBR), as well as assess any interconnections between these ecosystems. At the same time, the distribution characteristics of marine litter in the different compartments facilitated a more dynamic understanding of the load of marine litter supplied by the islands, both locally and externally. We observed that certain ecosystems, principally back-beach vegetation and mangroves, act as crucial marine litter accumulation zones. Mangroves are important hotspots for plastic accumulation, with densities above eight items/m² (minimum 8.38 and maximum 10.38 items/m²), while back-beach vegetation (minimum 1.43 and maximum 7.03 items/m²) also removes and stores a portion of the marine litter that arrives on the beaches. Tourist beaches for recreational activities have a low density of marine litter (minimum 0.01 and maximum 0.72 items/m²) due to regular clean-ups, whereas around non-tourist beaches, there is a greater variety of sources and accumulation (minimum 0.31 and maximum 5.41 items/m²). The low density of marine litter found on corals around the island (0-0.02 items/m²) indicates that there is still no significant marine litter stream to the coral reefs. Identifying contamination levels in terms of marine litter and possible flows between ecosystems is critical for adopting management and reduction strategies for such residues.

Microplastics in marine and aquatic habitats: sources, impact, and sustainable remediation approaches

Plastic trash dumped into water bodies degrade over time into small fragments. These plastic fragments, which come under the category of micro-plastics (MPs), are generally 0.05-5 mm in size, and due to their small size they are frequently consumed by aquatic organisms. As a result, widespread MPs infiltration is a global concern for the aquatic environment, posing a threat to existing life forms. MPs easily bind to other toxic chemicals or metals, acting as vector for such toxic substances and introducing them into life forms. Polyethylene, polypropylene, polystyrene, and other polymers are emerging pollutants that are detrimental to all types of organisms. The main route for MPs into the aquatic ecosystems is through the flushing of urban wastewater. The current paper investigates the origin, environmental fate, and toxicity of MPs, shedding light on their sustainable remediation.

Graphical abstract

The accumulation of microplastic pollution in a commercially important fishing ground

The Irish Sea is an important area for Norway Lobster Nephrops norvegicus fisheries, which are the most valuable fishing resource in the UK. Norway lobster are known to ingest microplastic pollution present in the sediment and have displayed reduced body mass when exposed to microplastic pollution. Here, we identified microplastic pollution in the Irish Sea fishing grounds through analysis of 24 sediment samples from four sites of differing proximity to the Western Irish Sea Gyre in both 2016 and 2019. We used µFTIR spectroscopy to identify seven polymer types, and a total of 77 microplastics consisting of fibres and fragments. The mean microplastics per gram of sediment ranged from 0.13 to 0.49 and 0 to 1.17 MP/g in 2016 and 2019, respectively. There were no differences in the microplastic counts across years, and there was no correlation of microplastic counts with proximity to the Western Irish Sea Gyre. Considering the consistently high microplastic abundance found in the Irish Sea, and the propensity of N. norvegicus to ingest and be negatively impacted by them, we suggest microplastic pollution levels in the Irish Sea may have adverse impacts on N. norvegicus and negative implications for fishery sustainability in the future.