Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

Regulation of Cell Behavior by Hydrostatic Pressure

Hydrostatic pressure (HP) regulates diverse cell behaviors including differentiation, migration, apoptosis, and proliferation. Abnormal HP is associated with pathologies including glaucoma and hypertensive fibrotic remodeling. In this review, recent advances in quantifying and predicting how cells respond to HP across several tissue systems are presented, including tissues of the brain, eye, vasculature and bladder, as well as articular cartilage. Finally, some promising directions on the study of cell behaviors regulated by HP are proposed.

Engineering hiPSC cardiomyocyte in vitro model systems for functional and structural assessment

The study of human cardiomyopathies and the development and testing of new therapies has long been limited by the availability of appropriate in vitro model systems. Cardiomyocytes are highly specialized cells whose internal structure and contractile function are sensitive to the local microenvironment and the combination of mechanical and biochemical cues they receive. The complementary technologies of human induced pluripotent stem cell (hiPSC) derived cardiomyocytes (CMs) and microphysiological systems (MPS) allow for precise control of the genetics and microenvironment of human cells in in vitro contexts. These combined systems also enable quantitative measurement of mechanical function and intracellular organization. This review describes relevant factors in the myocardium microenvironment that affect CM structure and mechanical function and demonstrates the application of several engineered microphysiological systems for studying development, disease, and drug discovery.

Physical confinement induces malignant transformation in mammary epithelial cells

The physical microenvironment of tumor cells plays an important role in cancer initiation and progression. Here, we present evidence that confinement - a new physical parameter that is apart from matrix stiffness - can also induce malignant transformation in mammary epithelial cells. We discovered that MCF10A cells, a benign mammary cell line that forms growth-arrested polarized acini in Matrigel, transforms into cancer-like cells within the same Matrigel material following confinement in alginate shell hydrogel microcapsules. The confined cells exhibited a range of tumor-like behaviors, including uncontrolled cellular proliferation and invasion. Additionally, 4-6 weeks after transplantation into the mammary fad pads of immunocompromised mice, the confined cells formed large palpable masses that exhibited histological features similar to that of carcinomas. Taken together, our findings suggest that physical confinement represents a previously unrecognized mechanism for malignancy induction in mammary epithelial cells and also provide a new, microcapsule-based, high throughput model system for testing new breast cancer therapeutics.

Biofabrication of phenotypic pulmonary fibrosis assays

Biofabrication techniques have enabled the formation of complex models of many biological tissues. We present a framework to contextualize biofabrication techniques within a disease modeling application. Fibrosis is a progressive disease interfering with tissue structure and function, which stems from an aberrant wound healing response. Epithelial injury and clot formation lead to fibroblast invasion and activation, followed by contraction and remodeling of the extracellular matrix. These stages have healthy wound healing variants in addition to the pathogenic analogs that are seen in fibrosis. This review evaluates biofabrication of a variety of phenotypic cell-based fibrosis assays. By recapitulating different contributors to fibrosis, these assays are able to evaluate biochemical pathways and therapeutic candidates for specific stages of fibrosis pathogenesis. Biofabrication of these culture models may enable phenotypic screening for improved understanding of fibrosis biology as well as improved screening of anti-fibrotic therapeutics.

Matrix-assisted cell transplantation for tissue vascularization

Cell therapy offers much promise for the treatment of ischemic diseases by augmenting tissue vasculogenesis. Matrix-assisted cell transplantation (MACT) has been proposed as a solution to enhance cell survival and integration with host tissue following transplantation. By designing semi synthetic matrices (sECM) with the correct physical and biochemical signals, encapsulated cells are directed towards a more angiogenic phenotype. In this review, we describe the choice of cells suitable for pro-angiogenic therapies, the properties that should be considered when designing sECM for transplantation and their relative importance. Pre-clinical models where MACT has been successfully applied to promote angiogenesis are reviewed to show the great potential of this strategy to treat ischemic conditions.

Bacterial cellulose nanofibers promote stress and fidelity of 3D-printed silk based hydrogel scaffold with hierarchical pores

One of the latest trends in the regenerative medicine is the development of 3D-printing hydrogel scaffolds with biomimetic structures for tissue regeneration and organ reconstruction. However, it has been practically difficult to achieve a highly biomimetic hydrogel scaffolds with proper mechanical properties matching the natural tissue. Here, bacterial cellulose nanofibers (BCNFs) were applied to improve the structural resolution and enhance mechanical properties of silk fibroin (SF)/gelatin composite hydrogel scaffolds. The SF-based hydrogel scaffolds with hierarchical pores were fabricated via 3D-printing followed by lyophilization. Results showed that the tensile strength of printed sample increased significantly with the addition of BCNFs in the bioink. Large pores and micropores in the scaffolds were achieved by designing printing pattern and lyophilization after extrusion. The pores ranging from 10 to 20 μm inside the printed filaments served as host for cellular infiltration, while the pores with a diameter from 300 to 600 μm circled by printed filaments ensured sufficient nutrient supply. These 3D-printed composite scaffolds with remarkable mechanical properties and hierarchical pore structures are promising for further tissue engineering applications.

Optimization of the cell microenvironment in a dual magnetic-pH-sensitive hydrogel-based scaffold by multiphysics modeling

A dual magnetic-pH-sensitive hydrogel-based scaffold was studied for optimization of a cell microenvironment by scaffold mechanical deformation and its biochemical response. In particular, the positions of the seeding cells and the concentration of potassium (K⁺) within the scaffold were optimized by a multieffect-coupling magnetic-pH-stimuli (MECmpH) model based on (i) the threshold of the mechanical force required for a mechanotransduction effect at the cellular level, and (ii) the common biological requirement for cell growth. In this model, the physicochemical mechanisms of a magnetic hydrogel were characterized using magneto-chemo-electro-mechanical coupled effects, including hydrogel magnetization, diffusion of the solvent and ions, ionic polarization, and nonlinear deformation. After validation of the model with experimental data, it was found that a higher pH and current intensity at the electromagnet and a shorter hydrogel-magnet distance contribute to larger scaffold deformation and thus a stronger mechanical force on the cells. Moreover, the cell seeding positions within the magnetic scaffold were optimized for improved cell culture through controlled current intensity in the electromagnet. Furthermore, the physiological concentration of K⁺ was also optimized by the initial fixed charge density within the scaffold. We concluded that this optimized magnetic scaffold via the MECmpH model may provide an appropriate microenvironment for efficient cell growth.

Toward a comprehensive view of cancer immune responsiveness: a synopsis from the SITC workshop

Tumor immunology has changed the landscape of cancer treatment. Yet, not all patients benefit as cancer immune responsiveness (CIR) remains a limitation in a considerable proportion of cases. The multifactorial determinants of CIR include the genetic makeup of the patient, the genomic instability central to cancer development, the evolutionary emergence of cancer phenotypes under the influence of immune editing, and external modifiers such as demographics, environment, treatment potency, co-morbidities and cancer-independent alterations including immune homeostasis and polymorphisms in the major and minor histocompatibility molecules, cytokines, and chemokines. Based on the premise that cancer is fundamentally a disorder of the genes arising within a cell biologic process, whose deviations from normality determine the rules of engagement with the host's response, the Society for Immunotherapy of Cancer (SITC) convened a task force of experts from various disciplines including, immunology, oncology, biophysics, structural biology, molecular and cellular biology, genetics, and bioinformatics to address the complexity of CIR from a holistic view. The task force was launched by a workshop held in San Francisco on May 14-15, 2018 aimed at two preeminent goals: 1) to identify the fundamental questions related to CIR and 2) to create an interactive community of experts that could guide scientific and research priorities by forming a logical progression supported by multiple perspectives to uncover mechanisms of CIR. This workshop was a first step toward a second meeting where the focus would be to address the actionability of some of the questions identified by working groups. In this event, five working groups aimed at defining a path to test hypotheses according to their relevance to human cancer and identifying experimental models closest to human biology, which include: 1) Germline-Genetic, 2) Somatic-Genetic and 3) Genomic-Transcriptional contributions to CIR, 4) Determinant(s) of Immunogenic Cell Death that modulate CIR, and 5) Experimental Models that best represent CIR and its conversion to an immune responsive state. This manuscript summarizes the contributions from each group and should be considered as a first milestone in the path toward a more contemporary understanding of CIR. We appreciate that this effort is far from comprehensive and that other relevant aspects related to CIR such as the microbiome, the individual's recombined T cell and B cell receptors, and the metabolic status of cancer and immune cells were not fully included. These and other important factors will be included in future activities of the taskforce. The taskforce will focus on prioritization and specific actionable approach to answer the identified questions and implementing the collaborations in the follow-up workshop, which will be held in Houston on September 4-5, 2019.

Skeletal myotube formation enhanced through fibrillated collagen nanofibers coated on a 3D-printed polycaprolactone surface

This work focused on considering the cellular responses of the growth and differentiation of myoblasts, C2C12, on fibrillated collagen-coated poly(ε-caprolactone) (PCL) surfaces. Through a fibrillation processing window using NaCl and collagen weight fractions, collagen fibril coating density can be controlled. Three different collagen-fibril densities coated on PCL strut were used to investigate the effects of the collagen fibril on the myoblast activities. After physical and cellular analyses of the scaffolds, such as surface morphology, fibronectin absorption, wettability, and mechanical properties, the rate of cell growth and the proficiency of the myoblasts to develop skeletal myotubes were evaluated. Based on the results, although the coated collagen nanofibers were randomly distributed, the fibrillated collagen layer with the appropriate density on the PCL surface promoted a greater myotube formation than that of the control, which had no fibrillated collagen. In particular, relatively higher densities of collagen fibril showed significantly greater myotube formation than those of the control (not-fibrillated collagen-coated on the PCL surface) and lower density of collagen fibril.

Functionalized DNA Hydrogels Produced by Polymerase-Catalyzed Incorporation of Non-Natural Nucleotides as a Surface Coating for Cell Culture Applications

Cells from most mammalian tissues require an extracellular matrix (ECM) for attachment and proper functioning. In vitro cell cultures therefore must be supplied with an ECM that satisfies both the biological needs of cells used and the technical demands of the experimental setup. The latter include matrix functionalization for cell attachment, favorable microscopic properties, and affordable production costs. Here, modified DNA materials are therefore developed as an ECM mimic. The material is prepared by chemical cross-linking of commonly available salmon sperm DNA. To render the material cell-compatible, it is enzymatically modified by DNA polymerase I to provide versatile attachment points for peptides, proteins, or antibodies via a modular strategy. Different cells specifically attach to the material, even from mixed populations. They can be mildly released for further cell studies by DNase I-mediated digestion of the DNA material. Additionally, neural stem cells not only attach and survive on the material but also differentiate to a neural lineage when prompted. Furthermore, the DNA material can be employed to capture and retain cells under flow conditions. The simple preparation of the DNA material and its wide scope of applications open new perspectives for various cell study challenges and medical applications.

Cell membrane engineering with synthetic materials: Applications in cell spheroids, cellular glues and microtissue formation

Biologically inspired materials with tunable bio- and physicochemical properties provide an essential framework to actively control and support cellular behavior. Cell membrane remodeling approaches benefit from the advances in polymer science and bioconjugation methods, which allow for the installation of un-/natural molecules and particles on the cells' surface. Synthetically remodeled cells have superior properties and are under intense investigation in various therapeutic scenarios as cell delivery systems, bio-sensing platforms, injectable biomaterials and bioinks for 3D bioprinting applications. In this review article, recent advances in the field of cell surface remodeling via bio-chemical means and the potential biomedical applications of these emerging cell hybrids are discussed. STATEMENT OF SIGNIFICANCE: Recent advances in bioconjugation methods, controlled/living polymerizations, microfabrication techniques and 3D printing technologies have enabled researchers to probe specific cellular functions and cues for therapeutic and research purposes through the formation of cell spheroids and polymer-cell chimeras. This review article highlights recent non-genetic cell membrane engineering strategies towards the fabrication of cellular ensembles and microtissues with interest in 3D in vitro modeling, cell therapeutics and tissue engineering. From a wider perspective, these approaches may provide a roadmap for future advances in cell therapies which will expedite the clinical use of cells, thereby improving the quality and accessibility of disease treatments.

Translation of a Coated Rigid Spherical Inclusion in an Elastic Matrix: Exact Solution, and Implications for Mechanobiology

The displacement of relatively rigid beads within a relatively compliant, elastic matrix can be used to measure the mechanical properties of the matrix. For example, in mechanobiological studies, magnetic or reflective beads can be displaced with a known external force to estimate the matrix modulus. Although such beads are generally rigid compared to the matrix, the material surrounding the beads typically differs from the matrix in one or two ways. The first case, as is common in mechanobiological experimentation, is the situation in which the bead must be coated with materials such as protein ligands that enable adhesion to the matrix. These layers typically differ in stiffness relative to the matrix material. The second case, common for uncoated beads, is the situation in which the beads disrupt the structure of the hydrogel or polymer, leading to a region of enhanced or reduced stiffness in the neighborhood of the bead. To address both cases, we developed the first analytical solution of the problem of translation of a coated, rigid spherical inclusion displaced within an isotropic elastic matrix by a remotely applied force. The solution is applicable to cases of arbitrary coating stiffness and size of the coating. We conclude by discussing applications of the solution to mechanobiology.

Mouse in vitro spermatogenesis on alginate-based 3D bioprinted scaffolds

In vitro spermatogenesis (IVS) has already been successfully achieved in rodents by organotypic and soft matrix culture systems. However, the former does not allow single cell input, and the latter presents as a simple thick layer in which all cells are embedded. We explored a new culture system using a mouse model by employing an alginate-based hydrogel and 3D bioprinting, to control scaffold design and cell deposition. We produced testicular constructs consisting of printed cell-free scaffolds (CFS) with prepubertal testicular cells (TC) in their easy-to-access macropores. Here, the pores represented the only cell compartment (TC/CFS). Double-cell compartment testicular constructs were achieved by culturing magnetic-activated cell sorting-enriched epithelial cells in the pores of interstitial cell-laden scaffolds (CD49f⁺/CLS). Cell spheres formed in the pores in the weeks following cell seeding on both CFS and CLS. Although restoration of the tubular architecture was not observed, patches of post-meiotic cells including elongated spermatids were found in 66% of TC/CFS. Differentiation up to the level of round spermatids and elongated spermatids was observed in all and 33% of CD49f⁺/CLS constructs, respectively. Organ culture served as the reference method for IVS, with complete spermatogenesis identified in 80% of cultivated prepubertal tissue fragments. So far, this is the first report applying a 3D bioprinting approach for IVS. Further optimization of the scaffold design and seeding parameters might be permissive for tubular architecture recreation and thereby increase the efficiency of IVS in printed testicular constructs. While it remains to be tested whether the gametes generated on the alginate-based scaffolds can support embryogenesis following IVF, this IVS approach might be useful for (patho)physiological studies and drug-screening applications.

Electrobiofabrication: electrically based fabrication with biologically derived materials

While conventional material fabrication methods focus on form and strength to achieve function, the fabrication of material systems for emerging life science applications will need to satisfy a more subtle set of requirements. A common goal for biofabrication is to recapitulate complex biological contexts (e.g. tissue) for applications that range from animal-on-a-chip to regenerative medicine. In these cases, the material systems will need to: (i) present appropriate surface functionalities over a hierarchy of length scales (e.g. molecular features that enable cell adhesion and topographical features that guide differentiation); (ii) provide a suite of mechanobiological cues that promote the emergence of native-like tissue form and function; and (iii) organize structure to control cellular ingress and molecular transport, to enable the development of an interconnected cellular community that is engaged in cell signaling. And these requirements are not likely to be static but will vary over time and space, which will require capabilities of the material systems to dynamically respond, adapt, heal and reconfigure. Here, we review recent advances in the use of electrically based fabrication methods to build material systems from biological macromolecules (e.g. chitosan, alginate, collagen and silk). Electrical signals are especially convenient for fabrication because they can be controllably imposed to promote the electrophoresis, alignment, self-assembly and functionalization of macromolecules to generate hierarchically organized material systems. Importantly, this electrically based fabrication with biologically derived materials (i.e. electrobiofabrication) is complementary to existing methods (photolithographic and printing), and enables access to the biotechnology toolbox (e.g. enzymatic-assembly and protein engineering, and gene expression) to offer exquisite control of structure and function. We envision that electrobiofabrication will emerge as an important platform technology for organizing soft matter into dynamic material systems that mimic biology's complexity of structure and versatility of function.

Stem cells from human exfoliated deciduous teeth as an alternative cell source in bio-root regeneration

A stem cell-mediated bioengineered tooth root (bio-root) has proven to be a prospective tool for the treatment of tooth loss. As shown in our previous studies, dental follicle cells (DFCs) are suitable seeding cells for the construction of bio-roots. However, the DFCs which can only be obtained from unerupted tooth germ are restricted. Stem cells from human exfoliated deciduous teeth (SHEDs), which are harvested much more easily through a minimally invasive procedure, may be used as an alternative seeding cell. In this case, we compared the odontogenic characteristics of DFCs and SHEDs in bio-root regeneration. Methods: The biological characteristics of SHEDs and DFCs were determined in vitro. The cells were then induced to secrete abundant extracellular matrix (ECM) and form macroscopic cell sheets. We combined the cell sheets with treated dentin matrix (TDM) for subcutaneous transplantation into nude mice and orthotopic jaw bone implantation in Sprague-Dawley rats to further verify their regenerative potential. Results: DFCs exhibited a higher proliferation rate and stronger osteogenesis and adipogenesis capacities, while SHEDs displayed increased migration ability and excellent neurogenic potential. Both dental follicle cell sheets (DFCSs) and sheets of stem cells from human exfoliated deciduous teeth (SHEDSs) expressed not only ECM proteins but also osteogenic and odontogenic proteins. Importantly, similar to DFCSs/TDM, SHEDSs/TDM also successfully achieved the in vivo regeneration of the periodontal tissues, which consist of periodontal ligament fibers, blood vessels and new born alveolar bone. Conclusions: Both SHEDs and DFCs possessed a similar odontogenic differentiation capacity in vivo, and SHEDs were regarded as a prospective seeding cell for use in bio-root regeneration in the future.

Electrospun Poly-ε-Caprolactone (PCL)/Dicalcium Phosphate Dihydrate (DCPD) Composite Scaffold for Tissue Engineering Application

Recently electrospun scaffolds show excellent response in cell adhesion, growth, and tissue healing in comparison with other techniques. So in this study, PCL and PCL/DCPD scaffolds were designed and prepared with electrospinning. The electrospun scaffolds were characterized by scanning electron microscope with X-ray elemental analysis, atomic force microcopy, differential scanning calorimetry, and contact angle analysis for optimizing the effective parameters. Fiber formation with uniform diameter and bead-free structure was obtained. Scaffold surface roughness increased from 100 nm for PCL to 440 nm for PCL/DCPD. DSC analysis showed the effects of DCPD on thermal stability of composite scaffold and the results of contact angle evaluation indicate improved hydrophilicity and ability of water absorption of PCL/DCPD composite fibers as compared to PCL fibers. MTT assay indicated lack of toxicity for human gingival fibroblast (HGF) cells after cell seeding on scaffold. Also, the composite scaffold can improve cell viability by helping their growth on its surface. So it can be concluded that by engineering the electrospinning parameters we can fabricate a PCL/DCPD composite scaffold for tissue engineering applications.

Reversibly Assembled Electroconductive Hydrogel via a Host-Guest Interaction for 3D Cell Culture

The study of cells responding to an electroconductive environment is impeded by the lack of a method, which would allow the encapsulation of cells in an extracellular matrix-like 3D electroactive matrix, and more challengingly, permit a simple mechanism to release cells for further characterization. Herein, we report a polysaccharide-based conductive hydrogel system formed via a β-cyclodextrin-adamantane host-guest interaction. Oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT) in the presence of adamantyl-modified sulfated alginate (S-Alg-Ad) results in bio-electroconductive polymer PEDOT:S-Alg-Ad, which can form hydrogel with poly-β-cyclodextrin (Pβ-CD). The PEDOT:S-Alg-Ad/Pβ-CD hydrogels can be tuned on aspects of mechanical and electrical properties, exhibit self-healing feature, and are injectable. Electron microscopy suggested that the difference in stiffness and conductivity is associated with the nacre-like layered nanostructures when different sizes of PEDOT:S-Alg-Ad nanoparticles were used. Myoblast C2C12 cells were encapsulated in the conductive hydrogel and exhibited proliferation rate comparable to that in nonconductive S-Alg-Ad/Pβ-CD hydrogel. The cells could be released from the hydrogels by adding the β-CD monomer. Astonishingly, the conductive hydrogel can dramatically promote myotube-like structure formation, which is not in the non-electroconductive hydrogel. The ability to embed and release cells in an electroconductive environment will open new doors for cell culture and tissue engineering.

Natural History Collections as Inspiration for Technology

Living organisms are the ultimate survivalists, having evolved phenotypes with unprecedented adaptability, ingenuity, resourcefulness, and versatility compared to human technology. To harness these properties, functional descriptions and design principles from all sources of biodiversity information must be collated - including the hundreds of thousands of possible survival features manifest in natural history museum collections, which represent 12% of total global biodiversity. This requires a consortium of expert biologists from a range of disciplines to convert the observations, data, and hypotheses into the language of engineering. We hope to unite multidisciplinary biologists and natural history museum scientists to maximize the coverage of observations, descriptions, and hypotheses relating to adaptation and function across biodiversity, to make it technologically useful. This is to be achieved by developments in meta- taxonomic classification, phylogenetics, systematics, biological materials research, structure and morphological characterizations, and ecological data gathering from the collections - the aim being to identify and catalogue features essential for good biomimetic design.

Alginate Hydrogel Modified with a Ligand Interacting with α3β1 Integrin Receptor Promotes the Differentiation of 3D Neural Spheroids toward Oligodendrocytes in Vitro

In this study, we established a long-term three-dimensional (3D) culture system by using integrin ligand modified alginate hydrogels to encapsulate and differentiate neural progenitor cells (NPCs) toward oligodendrocyte (OL) lineage cells. The porosity of the hydrogel was optimized by varying the alginate concentrations and then characterized by scanning electronic microscopy (SEM). The surface plasmon resonance (SPR) test was used to confirm the ligand-integrin interactions indicating adherence between the NPC surfaces and the hydrogels. Following encapsulation in the hydrogels, both mouse and human NPC sphere cultures could be maintained up to 90 days. Mouse NPC spheres were differentiated into viable neurons, astrocytes and mature OLs by day 60 in all groups whereas human NPC spheres were differentiated into neurons and later into GFAP positive astrocytes and O4 positive pre-OL within 90 days. The species difference in the timeline of OL development between mouse and human was reflected in this system. The ligand LXY30 interacting with the α3β1 integrin receptor was more effective in promoting the differentiation of hNPCs to OL lineage cells compared with the ligand LXW64 interacting with the αvβ3 integrin receptor, hyaluronic acid interacting with CD44 receptor or without any ligand. This study is the first to differentiate O4⁺ pre-OLs from hNPCs in a LXY30-α3β1 (integrin-ligand) modified alginate 3D hydrogel culture. This 3D platform could serve as a valuable tool in disease modeling, drug discovery, and NPC transplantation.

A preliminary study of the local biomechanical environment of liver tumors in vivo

PURPOSE

Biomechanical properties can be used as biomarkers to diagnose tumors, monitor tumor development, and evaluate treatment efficacy. The purpose of this preliminary study is to characterize the biomechanical environment of two typical liver tumors, hemangiomas (HEMs) and hepatocellular carcinomas (HCCs), and to investigate the potential of using strain metrics as biomarkers for tumor diagnosis, based on a limited clinical dataset.

METHODS

Magnetic resonance (MR) tagging was used to quantify the motion and deformation of the two types of liver tumors. Displacements of the tumors arising from a heartbeat were measured over one cardiac cycle. Local biomechanical conditions of the tumors were characterized by estimating two principal strains (ε₁ and ε₂ ) and an octahedral shear strain (ε_soct ) of the tumor and its peripheral region. Biomechanical conditions of the tumors were compared with those of the arbitrarily selected regions from healthy volunteers.

RESULTS

We observed that the HCCs had significantly smaller strain values compared to their peripheral tissues. However, the HEMs did not have significantly different strains from those of the peripheral tissues, and were similar to healthy liver regions. The sensitivity of using ε₁ , ε₂ , and ε_soct to diagnose HCC were all 1, while the sensitivity of using ε₁ , ε₂ , and ε_soct to diagnose HEM were 0.67, 0.17, and 0.67, respectively.

CONCLUSIONS

Lagrangian strain metrics provide insight into the biomechanical conditions of certain liver tumors in the human body and may provide another perspective for tumor characterization and diagnosis.

Synthetic Extracellular Matrices with Nonlinear Elasticity Regulate Cellular Organization

One of the promises of synthetic materials in cell culturing is that control over their molecular structures may ultimately be used to control their biological processes. Synthetic polymer hydrogels from polyisocyanides (PIC) are a new class of minimal synthetic biomaterials for three-dimensional cell culturing. The macromolecular lengths and densities of biofunctional groups that decorate the polymer can be readily manipulated while preserving the intrinsic nonlinear mechanics, a feature commonly displayed by fibrous biological networks. In this work, we propose the use of PIC gels as cell culture platforms with decoupled mechanical inputs and biological cues. For this purpose, different types of cells were encapsulated in PIC gels of tailored compositions that systematically vary in adhesive peptide (GRGDS) density, polymer length, and concentration; with the last two parameters controlling the gel mechanics. Both cancer and smooth muscle cells grew into multicellular spheroids with proliferation rates that depend on the adhesive GRGDS density, regardless of the polymer length, suggesting that for these cells, the biological input prevails over the mechanical cues. In contrast, human adipose-derived stem cells do not form spheroids but rather spread out. We find that the morphological changes strongly depend on the adhesive ligand density and the network mechanics; gels with the highest GRGDS densities and the strongest stiffening response to stress show the strongest spreading. Our results highlight the role of the nonlinear mechanics of the extracellular matrix and its synthetic mimics in the regulation of cell functions.

The influence of the stiffness of GelMA substrate on the outgrowth of PC12 cells

Recent studies have shown the importance of cell–substrate interaction on neurone outgrowth, where the Young’s modulus of the matrix plays a crucial role on the neurite length, migration, proliferation, and morphology of neurones. In the present study, PC12 cells were selected as the representative neurone to be cultured on hydrogel substrates with different stiffness to explore the effect of substrate stiffness on the neurone outgrowth. By adjusting the concentration of gelatin methacryloyl (GelMA), the hydrogel substrates with the variation of stiffnesses (indicated by Young’s modulus) from approximately 3–180 KPa were prepared. It is found that the stiffness of GelMA substrates influences neuronal outgrowth, including cell viability, adhesion, spreading, and average neurite length. Our results show a critical range of substrate’s Young’s modulus that support PC12 outgrowth, and modulate the cell characteristics and morphology. The present study provides an insight into the relationship between the stiffness of GelMA hydrogel substrates and PC12 cell outgrowth, and helps the design and optimization of tissue engineering scaffolds for nerve regeneration.

Cell encapsulation: Overcoming barriers in cell transplantation in diabetes and beyond

Cell-based therapy is emerging as a promising strategy for treating a wide range of human diseases, such as diabetes, blood disorders, acute liver failure, spinal cord injury, and several types of cancer. Pancreatic islets, blood cells, hepatocytes, and stem cells are among the many cell types currently used for this strategy. The encapsulation of these "therapeutic" cells is under intense investigation to not only prevent immune rejection but also provide a controlled and supportive environment so they can function effectively. Some of the advanced encapsulation systems provide active agents to the cells and enable a complete retrieval of the graft in the case of an adverse body reaction. Here, we review various encapsulation strategies developed in academic and industrial settings, including the state-of-the-art technologies in advanced preclinical phases as well as those undergoing clinical trials, and assess their advantages and challenges. We also emphasize the importance of stimulus-responsive encapsulated cell systems that provide a "smart and live" therapeutic delivery to overcome barriers in cell transplantation as well as their use in patients.

Decorating protein hydrogels reversibly enables dynamic presentation and release of functional protein ligands on protein hydrogels

Utilizing protein fragment reconstitution, we demonstrate the reversible and repeatable functionalization of protein hydrogels.

Stimuli-Responsive Supramolecular Hydrogels and Their Applications in Regenerative Medicine

Supramolecular hydrogels are a class of self-assembled network structures formed via non-covalent interactions of the hydrogelators. These hydrogels capable of responding to external stimuli are considered to be smart materials due to their ability to undergo sol-gel and/or gel-sol transition upon subtle changes in their surroundings. Such stimuli-responsive hydrogels are intriguing biomaterials with applications in tissue engineering, delivery of cells and drugs, modulating tissue environment to promote innate tissue repair, and imaging for medical diagnostics among others. This review summarizes the recent developments in stimuli-responsive supramolecular hydrogels and their potential applications in regenerative medicine. Specifically, various structural aspects of supramolecular hydrogelators involved in self-assembly, the role of external stimuli in tuning/controlling their phase transitions, and how these functions could be harnessed to advance applications in regenerative medicine are focused on. Finally, the key challenges and future prospects for these versatile materials are briefly described.

Recent development in biodegradable nanovehicle delivery system-assisted immunotherapy

A schematic illustration of BNDS biodegradation and release antigen delivery for assisting immunotherapy.

Retracted Article: Development of functional hydrogels for heart failure

Hydrogel-based approaches were reviewed for cardiac tissue engineering and myocardial regeneration in ischemia-induced heart failure, with an emphasis on functional studies, translational status, and clinical advancements.

Adhesion Control of Branched Catecholic Polymers by Acid Stimulation

Biomimetic material design is a useful method for producing new functional materials. In recent years, catecholic polymers inspired from the adhesion mechanism of marine organisms have attracted attention. Here, we demonstrated the preparation of catecholic polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization of an acetonide-protected catecholic monomer, that is, N-(2-(2,2-dimethylbenzo-1,3-dioxol-5-yl)ethyl)-acrylamide (DDEA). By selecting the specific RAFT reagents, well-defined branched PDDEA and linear PDDEA were obtained. These PDDEA samples showed stronger adhesion strength after deprotection by acid stimulation compared with that before deprotection. In addition, we demonstrated the adhesion control of synthetic polymers by photoirradiation in the presence of photoacid generators, which decompose under light and release an acid.

Homogeneous hydroxyapatite/alginate composite hydrogel promotes calcified cartilage matrix deposition with potential for three-dimensional bioprinting

Calcified cartilage regeneration plays an important role in successful osteochondral repair, since it provides a biological and mechanical transition from the unmineralized cartilage at the articulating surface to the underlying mineralized bone. To biomimic native calcified cartilage in engineered constructs, here we test the hypothesis that hydroxyapatite (HAP) stimulates chondrocytes to secrete the characteristic matrix of calcified cartilage. Sodium citrate (SC) was added as a dispersant of HAP within alginate (ALG), and homogeneous dispersal of HAP within ALG hydrogel was confirmed using sedimentation tests, electron microscopy, and energy dispersive spectroscopy. To examine the biological performance of ALG/HAP composites, chondrocyte survival and proliferation, extracellular matrix production, and mineralization potential were evaluated in the presence or absence of the HAP phase. Chondrocytes in ALG/HAP constructs survived well and proliferated, but also expressed higher levels of calcified cartilage markers compared to controls, including Collagen type X secretion, alkaline phosphatase (ALP) activity, and mineral deposition. Compared to controls, ALG/HAP constructs also showed an elevated level of mineralized matrix in vivo when implanted subcutaneously in mice. The printability of ALG/HAP composite hydrogel precursors was verified by 3D printing of ALG/HAP hydrogel scaffolds with a porous structure. In summary, these results confirm the hypothesis that HAP in ALG hydrogel stimulates chondrocytes to secrete calcified matrix in vitro and in vivo and reveal that ALG/HAP composites have the potential for 3D bioprinting and osteochondral regeneration.

The relationship between thiol-acrylate photopolymerization kinetics and hydrogel mechanics: An improved model incorporating photobleaching and thiol-Michael addition

Biocompatible hydrogels with defined mechanical properties are critical to tissue engineering and regenerative medicine. Thiol-acrylate photopolymerized hydrogels have attracted special interest for their degradability and cytocompatibility, and for their tunable mechanical properties through controlling factors that affect reaction kinetics (e.g., photopolymerization, stoichiometry, temperature, and solvent choice). In this study, we hypothesized that the mechanical property of these hydrogels can be tuned by photoinitiators via photobleaching and by thiol-Michael addition reactions. To test this hypothesis, a multiscale mathematical model incorporating both photobleaching and thiol-Michael addition reactions was developed and validated. After validating the model, the effects of thiol concentration, light intensity, and pH values on hydrogel mechanics were investigated. Results revealed that hydrogel stiffness (i) was maximized at a light intensity-specific optimal concentration of thiol groups; (ii) increased with decreasing pH when synthesis occurred at low light intensity; and (iii) increased with decreasing light intensity when synthesis occurred at fixed precursor composition. The multiscale model revealed that the latter was due to higher initiation efficiency at lower light intensity. More broadly, the model provides a framework for predicting mechanical properties of hydrogels based upon the controllable kinetics of thiol-acrylate photopolymerization.

High Modulus Conductive Hydrogels Enhance In Vitro Maturation and Contractile Function of Primary Cardiomyocytes for Uses in Drug Screening

Effective and quick screening and cardiotoxicity assessment are very crucial for drug development. Here, a novel composite hydrogel composed of carbon fibers (CFs) with high conductivity and modulus with polyvinyl alcohol (PVA) is reported. The conductivity of the composite hydrogel PVA/CFs is similar to that of natural heart tissue, and the elastic modulus is close to that of natural heart tissue during systole, due to the incorporation of CFs. PVA/CFs remarkably enhance the maturation of neonatal rat cardiomyocytes (NRCM) in vitro by upregulating the expression of α-actinin, troponin T, and connexin-43, activating the signaling pathway of α5 and β1 integrin-dependent ILK/p-AKT, and increasing the level of RhoA and hypoxia-inducible factor-1α. As a result, the engineered cell sheet-like constructs NRCM@PVA/CFs display much more synchronous, stable, and robust beating behavior than NRCM@PVA. When exposed to doxorubicin or isoprenaline, NRCM@PVA/CFs can retain effective beating for much longer time or change the contractile rate much faster than NRCM@PVA, respectively, therefore representing a promising heart-like platform for in vitro drug screening and cardiotoxicity assessment.

Acylhydrazone functionalized benzimidazole-based metallogel for the efficient detection and separation of Cr3

Chromium(iii) is a kind of microelement and can be converted to the more toxic chromium(vi), which is a carcinogen, by redox cycling. Thus, the development of novel materials for the detection and removal of Cr³⁺ is a very important issue. A novel metallogel chemosensor (BMG-Fe) based on functionalized benzimidazole (BM) and Fe³⁺ was constructed, which could fluorescently detect and separate Cr³⁺. The detection limit of BMG-Fe for Cr³⁺ is 2.62 × 10^-8 M, and it exhibited high sensitivity and selectivity for Cr³⁺. Meanwhile, the absorbing percentage of BMG-Fe for Cr³⁺ is 96.36%, indicating a high separation rate. Interestingly, the sensitivity and ingestion capacity of BMG-Fe for Cr³⁺ are better than that of the simple organogel (BMG). So, the metallogel BMG-Fe could be utilized for the efficient removal of heavy metal ions from waste water.

Hepatocyte culture on 3D porous scaffolds of PCL/PMCL

The development of three-dimensional (3D) porous scaffolds for soft tissue engineering mainly focused on manipulation of scaffold properties with cell behaviors. By emulsion freeze-drying method, four types of porous scaffolds were prepared from amorphous poly(4-methy-ε-caprolactone) (PMCL) and semi-crystalline poly(ε-caprolactone) (PCL) at different weight ratios, named as PMCL0, PMCL30, PMCL50 and PMCL70, respectively. Visual observation on cross-sectional images of the scaffolds appeared as sponge-like materials with three-dimensional and highly porous morphologies. However, the pore size, porosity and wettability of blends were not decreased linearly with increasing amorphous PMCL. Distinguished from PMCL30 or PMCL70, PMCL50 preserved intact PCL crystals distributed in amorphous matrix, resulting in the lowest Young's modulus (E) and relatively high wettability. From in vitro cell culture, it was observed that PMCL50 scaffold supported human induced hepatocytes (hiHeps) proliferation and function preservation best among all scaffolds. hiHeps on PMCL50 inclined to adopt fibroblastic morphology, whereas formed spheroidal morphology on PMCL0. It was suggested that our bare scaffolds with tailored properties have shown remarkable capability towards hiHep proliferation and function expression.

The protective effects of acupoint gel embedding on rats with myocardial ischemia-reperfusion injury

AIMS

Prevention and treatment of myocardial ischemia-reperfusion (I/R) injury has for many years been a hot topic in treating ischemic heart disease. As one of the most well-known methods of complementary and alternative medicine, acupuncture has attracted increasing interest in preventing myocardial I/R injury due to its remarkable effectiveness and minimal side effect. However, traditional acupuncture approaches are limited by cumbersome execution, high labor costs and inevitable pain caused by frequent stimulation. Therefore, in this work, we aimed to develop a novel acupoint gel embedding approach and investigated its role in protecting against myocardial I/R injury in rats.

MAIN METHODS

Gels were embedded at bilateral Neiguan (PC6) points of rats and their protective effects against myocardial I/R injury evaluated in terms of changes in histomorphology, myocardial enzymology, antioxidant capacity, anti-inflammatory response, and anti-apoptosis of cells.

KEY FINDINGS

We found that the approach of acupoint gel embedding could significantly reduce myocardial infarcted size, repair pathological changes, mitigate oxidative stress damage and inflammatory response, as well as inhibit apoptosis of cardiomyocytes. Such cardioprotective effects were found to be associated with Notch-1/Jagged-1 signaling pathway.

SIGNIFICANCE

The proposed approach of acupoint gel embedding has advantages in continuous acupoint stimulation, dosing controls, and no side effects in the course of treatment, as well as in reducing the pain caused by frequent acupuncture. It can form an alternative therapy to not only protect against myocardial I/R injury but also hold great potential in treating other diseases in the future.