Turning Photons into Drugs: Phthalocyanine-Based Photosensitizers as Efficient Photoantimicrobials

Photodynamic therapy of cancer using graphene nanomaterials

INTRODUCTION

High incidence and fatality rates of cancer remain a global challenge. The success of conventional treatment modalities is being questioned on account of adverse effects. Photodynamic therapy (PDT) is a potential alternative. It utilizes a combination of photosensitizer (PS), light and oxygen to target the tissues locally, thereby minimizing the damage to neighboring healthy tissues. Conventional PSs suffer from poor selectivity, high hydrophobicity and sub-optimal yield of active radicals. Graphene nanomaterials (GNs) exhibit interesting particulate and photophysical properties in the context of their use in PDT.

AREA COVERED

We focus on describing the mechanistic aspects of PDT-mediated elimination of cancer cells and the subsequent development of adaptive immunity. After covering up-to-date literature on the significant enhancement of PDT capability with GNs, we have discussed the probability of combining PDT with chemo-, immuno-, and photothermal therapy to make the treatment more effective.

EXPERT OPINION

GNs can be synthesized in various size ranges, and their biocompatibility can be improved through surface functionalization and doping. These can be used as PS to generate ROS or conjugated with other PS molecules for treating deep-seated tumors. With increasing evidence on biosafety, such materials offer hope as antitumor therapeutics.

Phthalocyanines Synthesis: A State-of-The-Art Review of Sustainable Approaches Through Green Chemistry Metrics

Driven by escalating environmental concerns, synthetic chemistry faces an urgent need for a green revolution. Green chemistry, with its focus on low environmental impacting chemicals and minimized waste production, emerges as a powerful tool in addressing this challenge. Metrics such as the E-factor guide the design of environmentally friendly strategies for chemical processes by quantifying the waste generated in obtaining target products, thus enabling interventions to minimize it. Phthalocyanines (Pcs), versatile molecules with exceptional physical and chemical properties, hold immense potential for technological applications. This review aims to bridge the gap between green chemistry and phthalocyanine synthesis by collecting the main examples of environmentally sustainable syntheses documented in the literature. The calculation of the E-factor of a selection of them provides insights on how crucial it is to evaluate a synthetic process in its entirety. This approach allows for a better evaluation of the actual sustainability of the phthalocyanine synthetic process and indicates possible strategies to improve it.

On the antibacterial photodynamic inactivation mechanism of Emodin and Dermocybin natural photosensitizers: A theoretical investigation

A DFT and TDDFT study has been carried out on monomeric anthraquinones Emodin and Dermocybin (Em, Derm) recently proposed as natural antibacterial photosensitizers able to act also against gram-negative microbes. The computational study has been performed considering the relative amount of neutral and ionic forms of each compound in water, with the variation of pH. The occurrence of both Type I and Type II photoreactions has been explored computing the absorption properties of each species, the spin-orbit coupling constants (SOC), the vertical ionization potentials and the vertical electron affinities. The most plausible deactivation channels leading to the population of excited triplet states have been proposed. Our data indicate Emodin as more active than Dermocybin in antimicrobial photodynamic therapy throughout the Type II mechanism. Our data support a dual TypeI/II activity of the monomeric anthraquinones Emodin and Dermccybin in water, in all the considered protonation states.

Phthalocyanine-based probes in alleviating or evading tumour-hypoxia for enhanced photo- and/ sono-mediated therapeutic efficacies

This review discusses the possible methods for improving therapeutic efficacies of phthalocyanine (Pcs) -based therapeutic probes in photo- and sono-dynamic therapies under hypoxic conditions. Herein, the structural design strategies including varying the central metal, position substituents and the effects of adjuvant used in supplementing the therapeutics activities of Pcs or formation of NPs are discussed for cancer therapies in hypoxic conditions. Different mechanisms induced for cell death influenced by the compositions of the Pcs-probes are discussed. The focus mainly highlights the oxygen (O2) -dependent mechanisms including methods of supplementing tumour microenvironment O2-concentrations to promote PDT or SDT therapies. Alternatively, O2-independent mechanisms mainly used to evade hypoxia by stimulating anticancer processes that don't require O2 to initiate cell death, such as the Fenton reaction or thermal ablation effects.

Fabrication and characterization of microporous soft templated photoactive 3D materials for water disinfection in batch and continuous flow

Water cleaning can be provided in batch mode or in continuous flow. For the latter, some kind of framework must withhold the cleaning agents from washout. Porous structures provide an ideal ratio of surface to volume for optimal access of the water to active sites and are able to facilitate rapid and efficient fluid transport to maintain a constant flow. When functionalized with suitable photoactive agents, they could be used in solar photocatalytic disinfection. In this study, we have used the sugar cube method to fabricate PDMS-based materials that contain three different classes of photosensitizers that differ in absorption wavelength and intensity, charge as well as in ability to generate singlet oxygen. The obtained sponges are characterized by scanning electron microscopy and digital microscopy. Archimede's method was used to measure porosity and density. We show that the materials can absorb visible light and generate Reactive Oxygen Species (ROS) that are required to kill bacteria. The disinfection ability was tested by examining how irradiation time and operation mode (batch vs. flow) contribute to the performance of the material. The current strategy is highly adaptable to other (medium) pressure-driven flow systems and holds promising potential for various applications, including continuous flow photoreactions.

Design consideration of phthalocyanines as sensitizers for enhanced sono-photodynamic combinatorial therapy of cancer

Cancer remains one of the diseases with the highest incidence and mortality globally. Conventional treatment modalities have demonstrated threatening drawbacks including invasiveness, non-controllability, and development of resistance for some, including chemotherapy, radiation, and surgery. Sono-photodynamic combinatorial therapy (SPDT) has been developed as an alternative treatment modality which offers a non-invasive and controllable therapeutic approach. SPDT combines the mechanism of action of sonodynamic therapy (SDT), which uses ultrasound, and photodynamic therapy (PDT), which uses light, to activate a sensitizer and initiate cancer eradication. The use of phthalocyanines (Pcs) as sensitizers for SPDT is gaining interest owing to their ability to induce intracellular oxidative stress and initiate toxicity under SDT and PDT. This review discusses some of the structural prerequisites of Pcs which may influence their overall SPDT activities in cancer therapy.

Photodynamic antimicrobial chemotherapy activities of phthalocyanine-antibiotic conjugates against bacterial biofilms and interactions with extracellular polymeric substances

This study sheds light on how to rationally design efficient photodynamic antimicrobial chemotherapy (PACT) agents by covalently linking phthalocyanines (Pcs) as photosensitizers with an antibiotic: Ciprofloxacin (CIP). Pcs used are zinc (II) 3-(4-((3,17,23-tris(4-(Benzo(d)thiazol-2-yl] thiol) phthalocyanine-9-yl) oxy) phenyl) propanoic acid (1) and zinc (II) 3-(4-(3,17,23-tris(3-(4-(triphenylphosphine) butyl) benzo[d]thiazol-3-ium bromide phthalocyanine-9-yl) oxy) phenyl) propanoic acid (2). High singlet oxygen quantum yields are observed in the presence of CIP. Square wave voltammetry was used to analyse the Pc-CIP uptake by bacteria biofilms of Streptococcus pneumoniae (S. pneumonia) and Escherichia coli (E. coli). Electrochemical impedance spectroscopy and scanning electron spectroscopy were used to study the stability of the biofilms in the presence Pc-CIP complexes and when exposed to light. Raman and time of flight-secondary ion mass spectrometry (TOF-SIMS) are used to identify the breakdown of cellular components of the biofilm and penetration of the Pc-CIP into the biofilms, respectively.

Graphene Oxide/Cholesterol-Substituted Zinc Phthalocyanine Composites with Enhanced Photodynamic Therapy Properties

In the present work, cholesterol (Chol)-substituted zinc phthalocyanine (Chol-ZnPc) and its composite with graphene oxide (GO) were prepared for photodynamic therapy (PDT) applications. Briefly, Chol-substituted phthalonitrile (Chol-phthalonitrile) was synthesized first through the substitution of Chol to the phthalonitrile group over the oxygen bridge. Then, Chol-ZnPc was synthesized by a tetramerization reaction of Chol-phthalonitrile with ZnCl2 in a basic medium. Following this, GO was introduced to Chol-ZnPc, and the successful preparation of the samples was verified through FT-IR, UV-Vis, 1H-NMR, MALDI-TOF MS, SEM, and elemental analysis. Regarding PDT properties, we report that Chol-ZnPc exhibited a singlet oxygen quantum yield (Φ∆) of 0.54, which is slightly lower than unsubstituted ZnPc. Upon introduction of GO, the GO/Chol-ZnPc composite exhibited a higher Φ∆, about 0.78, than that of unsubstituted ZnPc. Moreover, this enhancement was realized with a simultaneous improvement in fluorescence quantum yield (ΦF) to 0.36. In addition, DPPH results suggest low antioxidant activity in the composite despite the presence of GO. Overall, GO/Chol-ZnPc might provide combined benefits for PDT, particularly in terms of image guidance and singlet oxygen generation.

Fungal Anthraquinone Photoantimicrobials Challenge the Dogma of Cationic Photosensitizers

The photoantimicrobial potential of four mushroom species (i.e., Cortinarius cinnabarinus, C. holoxanthus, C. malicorius, and C. sanguineus) was explored by studying the minimal inhibitory concentrations (MIC) via a light-modified broth microdilution assay based on the recommended protocols of the European Committee on Antimicrobial Susceptibility Testing (EUCAST). The extracts were tested against Candida albicans, Escherichia coli, and Staphylococcus aureus under blue (λ = 428 and 478 nm, H = 30 J/cm2) and green light (λ = 528 nm, H = 30 J/cm2) irradiation. Three extracts showed significant photoantimicrobial effects at concentrations below 25 μg/mL. Targeted isolation of the major pigments from C. sanguineus led to the identification of two new potent photoantimicrobials, one of them (i.e., dermocybin) being active against S. aureus and C. albicans under green light irradiation [PhotoMIC530 = 39.5 μM (12.5 μg/mL) and 2.4 μM (0.75 μg/mL), respectively] and the other one (i.e., emodin) being in addition active against E. coli in a low micromolar range [PhotoMIC428 = 11.1 μM (3 μg/mL)]. Intriguingly, dermocybin was not (photo)cytotoxic against the three tested cell lines, adding an additional level of selectivity. Since both photoantimicrobials are not charged, this discovery shifts the paradigm of cationic photosensitizers.

From disinfectants to antibiotics: Enhanced biosafety of quaternary ammonium compounds by chemical modification

The excessive use of quaternary ammonium compounds (QACs) following the COVID-19 pandemic has raised substantial concerns regarding their biosafety. Overuse of QACs has been associated with chronic biological adverse effects, including genotoxicity or carcinogenicity. In particular, inadvertent intravascular administration or oral ingestion of QACs can lead to fatal acute toxicity. To enhance the biosafety and antimicrobial efficacy of QACs, this study reports a new series of QACs, termed as PACs, with the alkyl chain of benzalkonium substituted by a phthalocyanine moiety. Firstly, the rigid phthalocyanine moiety enhances the selectivity of QACs to bacteria over human cells and reduces alkyl chain's entropic penalty of binding to bacterial membranes. Furthermore, phthalocyanine neutralizes hemolysis and cytotoxicity of QACs by binding with albumin in plasma. Our experimental results demonstrate that PACs inherit the optical properties of phthalocyanine and validate the broad-spectrum antibacterial activity of PACs in vitro. Moreover, the intravascular administration of the most potent PAC, PAC1a, significantly reduced bacterial burden and ameliorated inflammation level in a bacteria-induced septic mouse model. This study presents a new strategy to improve the antimicrobial efficacy and biosafety of QACs, thus expanding their range of applications to the treatment of systemic infections.

Exploring the mechanism of photosensitizer conjugation on membrane perturbation of antimicrobial peptide: A multiscale molecular simulation study

Antimicrobial peptides (AMPs) exert their biological functions by perturbation with cellular membrane. Conjugation of AMPs with photosensitizer (PS) is a promising strategy for enhancing the efficacy and reducing systemic toxicity of AMPs. However, it is still elusive how the conjugated PS impacts the perturbation of AMPs on cell membrane from molecular level. Here, we addressed this issue by a multiscale computational strategy on pyropheophorbide-a (PPA) conjugated K6L9 (PPA-K6L9), a PS-AMP conjugate developed by us previously. Our atomistic molecular dynamics (MD) simulations revealed that the porphyrin moiety of PPA enhanced the stability of the conjugate in a lipid bilayer membrane model. Moreover, such moiety also maintained the amphipathic structure of K6L9, which is crucial for membrane pore formation. Coarse-grained MD simulations further showed that the conjugates aggregated in membrane environment and formed more stable toroidal pores with respect to K6L9 alone, suggesting the conjugation of PPA may enhance the membrane-disruption activity of K6L9. Consistent with this, our cellular experiments confirmed that PPA-K6L9 was more toxic to 4 T1 tumor cells than K6L9. This study provides insights into the mechanism by which PS-AMP conjugates disrupt cellular membranes and could aid in the design of more potent AMP conjugates.

Solvent Induced Conversion of a Self-Assembled Gyrobifastigium to a Barrel and Encapsulation of Zinc-Phthalocyanine within the Barrel for Enhanced Photodynamic Therapy

A rare gyrobifastigium architecture (GB) was constructed by self-assembly of a tetradentate donor (L) with Pd^II acceptor in DMSO. The GB was converted to its isomeric tetragonal barrel (MB) upon treatment with water. The hydrophobic cavity of MB has been explored for the encapsulation of zinc-phthalocyanine (ZnPc), which is an excellent photosensitizer for photodynamic therapy (PDT). However, the poor water-solubility and aggregation tendency are the main reasons for the suboptimal PDT performance of free ZnPc in the aqueous medium. Effective solubilization of ZnPc in an aqueous medium was achieved by encapsulating it in the cavity of MB. The inclusion complex (ZnPc⊂MB) showed enhanced singlet oxygen generation in water. Higher cellular uptake and anticancer activity of the ZnPc⊂MB compared to free ZnPc on HeLa cells indicate that encapsulation of ZnPc in an aqueous host is a potential strategy for enhancement of its PDT activity in water.

Cobalamin (Vitamin B12) in Anticancer Photodynamic Therapy with Zn(II) Phthalocyanines

Photodynamic therapy (PDT) is a curative method, firstly developed for cancer therapy with fast response after treatment and minimum side effects. Two zinc(II) phthalocyanines (3ZnPc and 4ZnPc) and a hydroxycobalamin (Cbl) were investigated on two breast cancer cell lines (MDA-MB-231 and MCF-7) in comparison to normal cell lines (MCF-10 and BALB 3T3). The novelty of this study is a complex of non-peripherally methylpyridiloxy substituted Zn(II) phthalocyanine (3ZnPc) and the evaluation of the effects on different cell lines due to the addition of second porphyrinoid such as Cbl. The results showed the complete photocytotoxicity of both ZnPc-complexes at lower concentrations (<0.1 μM) for 3ZnPc. The addition of Cbl caused a higher phototoxicity of 3ZnPc at one order lower concentrations (<0.01 μM) with a diminishment of the dark toxicity. Moreover, it was determined that an increase of the selectivity index of 3ZnPc, from 0.66 (MCF-7) and 0.89 (MDA-MB-231) to 1.56 and 2.31, occurred by the addition of Cbl upon exposure with a LED 660 nm (50 J/cm²). The study suggested that the addition of Cbl can minimize the dark toxicity and improve the efficiency of the phthalocyanines for anticancer PDT applications.

Synthesis, Cellular Uptake, and Photodynamic Activity of Oligogalactosyl Zinc(II) Phthalocyanines

A series of di-α-substituted zinc(II) phthalocyanines with different number of galactose moieties, ranging from 1 to 8, namely Pc-gal_n (n=1, 2, 4, and 8) were designed and synthesized. The synthesis involved the copper-catalyzed azide-alkyne cycloaddition reaction of a mono- or dialkynyl zinc(II) phthalocyanine with an acetyl-protected galactosyl azide or its dendritic derivative with four acetyl-protected galactosyl groups, followed by removal of the acetyl protecting groups via alkaline hydrolysis. In N,N-dimethylformamide, these oligogalactosyl phthalocyanines were non-aggregated as shown by the strong Q-band absorption and fluorescence emission. Owing to the di-α-substitution, they also behaved as efficient singlet oxygen generators upon light irradiation with a singlet oxygen quantum yield of 0.84. The spectroscopic and photophysical properties were not affected by the number of galactosyl units. In contrast, the compounds became significantly aggregated and quenched in phosphate-buffered saline. Their cellular uptake was then studied using a range of cell lines, which generally followed the order Pc-gal₁ >Pc-gal₂ ≈Pc-gal₄ >Pc-gal₈ . Interestingly, the di-galactosyl analogue exhibited selective uptake against HeLa human cervical carcinoma cells through an energy-dependent pathway instead of the expected asialoglycoprotein receptor. Upon light irradiation, it could effectively kill the cells with a half-maximal inhibitory concentration of 0.58 μM.

Chlorophenyl thiophene silicon phthalocyanine: Synthesis, two-photon bioimaging-guided lysosome target, and in vitro photodynamic efficacy

The development of efficient photosensitizers with high singlet oxygen quantum yield, strong fluorescent emission, excellent photostability, and specific organelle targeting is in great demand for the enhancement of PDT treatment efficiency. This study designed and synthesized a new two-photon photosensitizer chlorophenyl thiophene axially substituted silicon (IV) phthalocyanine (CBT-SiPc). CBT-SiPc showed specific targeting of lysosomes in living cells and good biocompatibility. Furthermore, high ¹O₂ generation efficiency and high PDT efficiency in MCF-7 breast cancers under irradiation were also demonstrated. The novel CBT-SiPc showed great potential in the application of lysosome-targeted and two-photon bioimaging-guided photodynamic cancer therapy.

Photodynamic Inactivation of Bacteria and Biofilms with Benzoselenadiazole-Doped Metal-Organic Frameworks

Bacterial biofilms are difficult to treat due to their resistance to traditional antibiotics. Although photodynamic therapy (PDT) has made significant progress in biomedical applications, most photosensitizers have poor water solubility and can thus aggregate in hydrophilic environments, leading to the quenching of photosensitizing activity in PDT. Herein, a benzoselenadiazole-containing ligand was designed and synthesized to construct the zirconium (IV)-based benzoselenadiazole-doped metal-organic framework (Se-MOF). Characterizations revealed that Se-MOF is a type of UiO-68 topological framework with regular crystallinity and high porosity. Compared to the MOF without benzoselenadiazole, Se-MOF exhibited a higher ¹O₂ generation efficacy and could effectively kill Staphylococcus aureus bacteria under visible-light irradiation. Importantly, in vitro biofilm experiments confirmed that Se-MOF could efficiently inhibit the formation of bacteria biofilms upon visible-light exposure. This study provides a promising strategy for developing MOF-based PDT agents, facilitating their transformation into clinical photodynamic antibacterial applications.

A Greener Route to Blue: Solid-State Synthesis of Phthalocyanines

Phthalocyanines are important organic dyes with a broad applicability in optoelectronics, catalysis, sensing and nanomedicine. Currently, phthalocyanines are synthetized in high boiling organic solvents, like dimethylaminoethanol (DMAE), which is a flammable, corrosive, and bioactive substance, miscible with water and harmful to the environment. Here we show a new solid-state approach for the high-yielding synthesis of phthalocyanines, which reduces up to 100-fold the amount of DMAE. Through systematic screening of solid-state reaction parameters, carried out by ball-milling and aging, we reveal the influence of key variables-temperature, presence of a template, and the amount and role of DMAE in the conversion of tBu phthalonitrile to tetra-tBu phthalocyanine. These results set the foundations to synthesize these high-performance dyes through a greener approach, opening the field of solid-state synthesis to a wider family of phthalocyanines.

Two-photon, red light uncaging of alkyl radicals from organorhodium(III) phthalocyanine complexes

A stepwise two-photon, red light excitation of organorhodium(III) phthalocyanine complexes was found to induce the activation of the axial metal-carbon bond to generate alkyl radicals/aldehydes. The cooperative action of the photouncaging reaction and the photochemical generation of reactive oxygen species were indicated to induce the cell deaths.

Photoinactivation of non-tuberculous mycobacteria using Zn-phthalocyanine loaded into liposomes

Non-tuberculous mycobacteria are a heterogeneous group of environmental bacteria and other than the well-known Mycobacterium tuberculosis complex and Mycobacterium leprae. They could cause localized or disseminated infections. Mycobacterium chelonae and Mycobacterium fortuitum are among the most clinically relevant non-tuberculous mycobacteria species. The infections treatment is complex since they are resistant to antituberculosis drugs and the biofilm formation makes them impermeable to several antibiotics. Antimicrobial photodynamic therapy (aPDT) constitutes an alternative to eliminate pathogens, principally those antimicrobials resistant. Among explored photosensitizers, phthalocyanines are considered excellent, but with a disadvantage: a lack solubility in aqueous media. Consequently, several nanocarriers have been studied in the last years. In this work, a Zn-phthalocyanine into liposomes was evaluated to photoinactivate M. fortuitum and M. chelonae. The results show a higher photodynamic activity of ZnPc into liposomes respect to solution. Furthermore, M. fortuitum was more sensible to aPDT than M. chelonae.

Photodynamic inactivation of pathogenic Gram-negative and Gram-positive bacteria mediated by Si(IV) phthalocyanines bearing axial ammonium units

The photodynamic inactivation (PDI) of microorganisms has gained interest as an efficient option for conventional antibiotic treatments. Recently, Si(IV) phthalocyanines (SiPcs) have been highlighted as promising photosensitizers (PSs) to the PDI of microorganisms due to their remarkable absorption and emission features. To increase the potential of cationic SiPcs as PS drugs, one novel (1a) and two previously described (2a and 3a) axially substituted PSs with di-, tetra-, and hexa-ammonium units, respectively, were synthesized and characterized. Their PDI effect was evaluated for the first time against Escherichia coli and Staphylococcus aureus, a Gram-negative and a Gram-positive bacterium, respectively. The photodynamic treatments were conducted with PS concentrations of 3.0 and 6.0 μM under 60 min of white light irradiation (150 mW.cm^-2). The biological results show high photodynamic efficiency for di- and tetra-cationic PSs 1a and 2a (6.0 μM), reducing the E. coli viability in 5.2 and 3.9 log, respectively (after 15 min of dark incubation before irradiation). For PS 3a, a similar bacterial reduction (3.6 log) was achieved but only with an extended dark incubation period (30 min). Under the same experimental conditions, the photodynamic effect of cationic PSs 1a-3a on S. aureus was even more promising, with abundance reductions of ca. 8.0 log after 45-60 min of PDI treatment. These results reveal the high PDI efficiency of PSs bearing ammonium groups and suggest their promising application as a broad-spectrum antimicrobial to control infections caused by Gram-negative and Gram-positive bacteria.

The implications of Ortho-, Meta- and Para- Directors on the In-Vitro Photodynamic Antimicrobial Chemotherapy Activity of Cationic Pyridyl-dihydrothiazole Phthalocyanines

Cationic Zn phthalocyanine complexes derived by alkylation reaction of tetra-(pyridinyloxy) phthalocyanines at the ortho, meta, and para positions to form Zn (II) Tetrakis 3-(4-(2-pyridin-1-ium-1-yl) butyl)-2-mercapto-4,5-dihydrothiazol-3-ium phthalocyanine (2), Zn (II) Tetrakis 3-(4-(3-pyridin-1-ium-1-yl) butyl)-2-mercapto-4,5-dihydrothiazol-3-ium phthalocyanine (4) and Zn (II) Tetrakis 3-(4-(4-pyridin-1-ium-1-yl) butyl)-2-mercapto-4,5-dihydrothiazol-3-ium phthalocyanine (6). The photophysicochemical behaviours of the Pc complexes are assessed. The meta and para-substituted complexes demonstrate high singlet oxygen quantum yields. The cationic Pcs demonstrate good planktonic antibacterial activity towards Staphylococcus aureus and Escherichia coli with the highest log reduction values of 9.29 and 8.55, respectively. The cationic complexes also demonstrate a significant decrease in the viability of in vitro biofilms after photo-antimicrobial chemotherapy at 100 µM for both Staphylococcus aureus and Escherichia coli biofilms.

Application of Fullerenes as Photosensitizers for Antimicrobial Photodynamic Inactivation: A Review

Antimicrobial photodynamic inactivation (aPDI) is a newly emerged treatment approach that can effectively address the issue of multidrug resistance resulting from the overuse of antibiotics. Fullerenes can be used as promising photosensitizers (PSs) for aPDI due to the advantages of high triplet state yields, good photostability, wide antibacterial spectrum, and permissibility of versatile functionalization. This review introduces the photodynamic activities of fullerenes and the up-to-date understanding of the antibacterial mechanisms of fullerene-based aPDI. The most recent works on the functionalization of fullerenes and the application of fullerene derivatives as PSs for aPDI are also summarized. Finally, certain remaining challenges are emphasized to provide guidance on future research directions for achieving clinical application of fullerene-based aPDI.

Influence of photosensitizer concentration and polymer composition on photoinduced antimicrobial activity of PVA- and PVA-chitosan-based electrospun nanomaterials cross-linked with tailor-made silicon(IV) phthalocyanine

The ongoing effort to eradicate pathogenic bacteria and viruses is a major endeavor that requires development of new and innovative materials. Materials based on photodynamic action represent an emerging and attractive area of research, and therefore, a broad understanding of chemical design principles is required. In the present study, we investigated the antibacterial and antiviral activities of five different nanofibrous membranes composed of poly(vinyl alcohol) or poly(vinyl alcohol)-chitosan mixture cross-linked through silicon(IV)phthalocyanine derivative with the aim to identify the role of the carrier polymer and photosensitizers concentration on its efficacy. A straightforward cross-linking process was adopted to create a water-stable material with an almost uniform distribution of the fiber structure, as revealed by scanning electron microscopy. The results of the antimicrobial studies showed that the increase in the amount of chitosan in the polymer mixture, rather than the increase in the photosensitizer concentration, enhanced the activity of the material. Due to their visible light-triggered antimicrobial activity, the resulting materials provide valuable opportunities for both topical antimicrobial photodynamic therapy and the area of environmental remediation.

Palladium Phthalocyanines Varying in Substituents Position for Photodynamic Inactivation of Flavobacterium hydatis as Sensitive and Resistant Species

Antimicrobial photodynamic therapy (aPDT) has been considered as a promising methodology to fight the multidrug resistance of pathogenic bacteria. The procedure involves a photoactive compound (photosensitizer), the red or near infrared spectrum for its activation, and an oxygen environment. In general, reactive oxygen species are toxic to biomolecules which feature a mechanism of photodynamic action. The present study evaluates two clinical isolates of Gram-negative Flavobacteriumhydatis (F. hydatis): a multidrug resistant (R) and a sensitive (S) strain. Both occur in farmed fish, leading to the big production losses because of the inefficacy of antibiotics. Palladium phthalocyanines (PdPcs) with methylpyridiloxy groups linked peripherally (pPdPc) or non-peripherally (nPdPc) were studied with full photodynamic inactivation for 5.0 µM nPdPc toward both F. hydatis, R and S strains (6 log), but with a half of this value (3 log) for 5.0 µM pPdPc and only for F. hydatis, S. In addition to the newly synthesized PdPcs as a "positive control" was applied a well-known highly effective zinc phthalocyanine (ZnPcMe). ZnPcMe showed optimal photocytotoxicity for inactivation of both F. hydatis R and S. The present study is encouraging for a further development of aPDT with phthalocyanines as an alternative method to antibiotic medication to keep under control the harmful pathogens in aquacultures' farms.

The Surprisingly Positive Effect of Zinc-Phthalocyanines With High Photodynamic Therapy Efficacy of Melanoma Cancer

Phthalocyanine (Pc) dyes are photoactive molecules that can absorb and emit light in the visible spectrum, especially in the red region of the spectrum, with great potential for biological scopes. For this target, it is important to guarantee a high Pc solubility, and the use of suitable pyridinium units on their structure can be a good strategy to use effective photosensitizers (PSs) for photodynamic therapy (PDT) against cancer cells. Zn(II) phthalocyanines (ZnPcs) conjugated with thiopyridinium units (1–3) were evaluated as PS drugs against B16F10 melanoma cells, and their photophysical, photochemical, and in vitro photobiological properties were determined. The photodynamic efficiency of the tetra- and octa-cationic ZnPcs 1–3 was studied and compared at 1, 2, 5, 10, and 20 µM. The different number of charge units, and the presence/absence of a-F atoms on the Pc structure, contributes for their PDT efficacy. The 3-(4′,5′-dimethylthiazol-2′-yl)-2,5-diphenyl tetrazolium bromide (MTT) assays on B16F10 melanoma cells show a moderate to high capacity to be photoinactivated by ZnPcs 1–3 (ZnPc 1 > ZnPc 2 > ZnPc 3). The best PDT conditions were found at a Pc concentration of 20 μM, under red light (λ = 660 ± 20 nm) at an irradiance of 4.5 mW/cm² for 667 s (light dose of 3 J/cm²). In these conditions, it is noteworthy that the cationic ZnPc 1 shows a promising photoinactivation ratio, reaching the detection limit of the MTT method. Moreover, these results are comparable to the better ones in the literature.

Photodynamic Inactivation of Antibiotic-Resistant and Sensitive Aeromonas hydrophila with Peripheral Pd(II)- vs. Zn(II)-Phthalocyanines

The antimicrobial multidrug resistance (AMR) of pathogenic bacteria towards currently used antibiotics has a remarkable impact on the quality and prolongation of human lives. An effective strategy to fight AMR is the method PhotoDynamic Therapy (PDT). PDT is based on a joint action of a photosensitizer, oxygen, and light within a specific spectrum. This results in the generation of singlet oxygen and other reactive oxygen species that can inactivate the pathogenic cells without further regrowth. This study presents the efficacy of a new Pd(II)- versus Zn(II)-phthalocyanine complexes with peripheral positions of methylpyridiloxy substitution groups (pPdPc and ZnPcMe) towards Gram-negative bacteria Aeromonas hydrophila (A.hydrophila). Zn(II)-phthalocyanine, ZnPcMe was used as a reference compound for in vitro studies, bacause it is well-known with a high photodynamic inactivation ability for different pathogenic microorganisms. The studied new isolates of A.hydrophila were antibiotic-resistant (R) and sensitive (S) strains. The photoinactivation results showed a full effect with 8 µM pPdPc for S strain and with 5 µM ZnPcMe for both R and S strains. Comparison between both new isolates of A.hydrophila (S and R) suggests that the uptakes and more likely photoinactivation efficacy of the applied phthalocyanines are independent of the drug sensitivity of the studied strains.

Expanding the applications of photodynamic therapy-tooth bleaching

OBJECTIVES

The current tooth bleaching materials are associated with adverse effect. Photodynamic method based on a novel photosensitizer alone, without combining with peroxides, is evaluated for tooth bleaching application.

MATERIALS AND METHODS

Teeth samples were randomly divided into 3 groups with different treatment schemes, including negative control group (group A, physiological saline), experimental group (group B, ZnPc(Lys)5), and the positive control group (group C, hydrogen peroxide). Tooth color, surface microhardness, and roughness were determined at baseline, right after the first and second phase of bleaching, as well as 1 week and 1 month post-bleaching. Four samples in each group was randomly selected to evaluate the changes in surface morphology using the scanning electron microscope.

RESULTS

The color change values (ΔE) in group B (7.10 ± 1.03) and C (12.22 ± 2.35) were significantly higher than that in group A (0.93 ± 0.30, P < 0.05). Additionally, surface microhardness and roughness were significantly affected in group C, but not in the group A and B. Furthermore, the scanning electron microscope images showed no adverse effect of enamel in the group A and B while the group C demonstrated corrosive changes.

CONCLUSIONS

ZnPc(Lys)5 had a satisfactory bleaching effect and is promising to be a new type of tooth bleaching agent.

CLINICAL RELEVANCE

The current tooth bleaching materials give a satisfactory clinical outcome and long-term stability, but associated with some adverse reactions. Photosenstizer ZnPc(Lys)5 eliminated the main side effects observed in hydrogen peroxide-based agents on the enamel, and also had a satisfactory bleaching effect and provide a novel selective bleaching scheme for clinical use.

Regulation of photo triggered cytotoxicity in electrospun nanomaterials: role of photosensitizer binding mode and polymer identity

Although electrospun nanomaterials containing photoactive dyes currently compete with the present state of art antimicrobial materials, relatively few structure-activity relationships have been established to identify the role of carrier polymer and photosensitizer binding mode on the performance of the materials. In this study scaffolds composed of poly(vinyl alcohol), polyacrylonitrile, poly(caprolactone), and tailor-made phthalocyanine-based photosensitizers are developed utilizing electrospinning as a simple, time and cost-effective method. The photoinduced activity of nanofibrous materials was characterized in vitro against E. coli and B. subtilis as models for Gram-negative and Gram-positive bacteria respectively, as well as against bacteriophages phi6 and MS2 as models for enveloped and non-enveloped viruses respectively. For the first time, we show how polymer-specific properties affect antifouling and antimicrobial activity of the nanofibrous material, indicating that the most promising way to increase efficiency is likely via methods that focus on increasing the number of short, but strong and reversible bacteria-surface interactions.

Application of TD-DFT Theory to Studying Porphyrinoid-Based Photosensitizers for Photodynamic Therapy: A Review

An important focus for innovation in photodynamic therapy (PDT) is theoretical investigations. They employ mostly methods based on Time-Dependent Density Functional Theory (TD-DFT) to study the photochemical properties of photosensitizers. In the current article we review the existing state-of-the-art TD-DFT methods (and beyond) which are employed to study the properties of porphyrinoid-based systems. The review is organized in such a way that each paragraph is devoted to a separate aspect of the PDT mechanism, e.g., correct prediction of the absorption spectra, determination of the singlet-triplet intersystem crossing, and interaction with molecular oxygen. Aspects of the calculation schemes are discussed, such as the choice of the most suitable functional and inclusion of a solvent. Finally, quantitative structure-activity relationship (QSAR) methods used to explore the photochemistry of porphyrinoid-based systems are discussed.

Photoinactivation of multispecies cariogenic biofilm mediated by aluminum phthalocyanine chloride encapsulated in chitosan nanoparticles

This study aimed to characterize the aluminum phthalocyanine chloride (AlClPc) encapsulated in chitosan nanoparticles (CN) and apply it in antimicrobial photodynamic therapy (aPDT) on multispecies biofilm composed of Streptococcus mutans, Lactobacillus casei, and Candida albicans to analyze the antimicrobial activity and lactate production after treatment. Biofilms were formed in 24-well polystyrene plates at 37 °C for 48 h under microaerophilia. The following groups were evaluated (n = 9): as a positive control, 0.12% chlorhexidine gluconate (CHX); phosphate-buffered saline (PBS) as a negative control; 2.5% CN as release vehicle control; the dark toxicity control of the formulations used (AlClPc and AlClPc + CN) was verified in the absence of light; for aPDT, after 30 min incubation time, the photosensitizers at a final concentration of 5.8 × 10^-3 mg/mL were photoirradiated for 1 min by visible light using a LED device (AlClPc + L and AlClPc + CN + L) with 660 nm at the energy density of 100 J/cm². An in vitro kit was used to measure lactate. The biofilm composition and morphology were observed by scanning electron microscopy (SEM). The antimicrobial activity was analyzed by quantifying colony forming units per mL (CFU/mL) of each microorganism. Bacterial load between groups was analyzed by ANOVA and Tukey HSD tests (α = 0.05). A lower lactate dosage was observed in the aPDT AlClPc + CN + L and CHX groups compared to the CN and AlClPc groups. The aPDT mediated by the nanoconjugate AlClPc + CN + L showed a significant reduction in the viability of S. mutans (3.18 log10 CFU/mL), L. casei (4.91 log10 CFU/mL), and C. albicans (2.09 log10 CFU/mL) compared to the negative control PBS (p < 0.05). aPDT using isolated AlClPc was similar to PBS to the three microorganisms (p > 0.05). The aPDT mediated by the nanoconjugate AlClPc + CN + L was efficient against the biofilm of S. mutans, L. casei, and C. albicans.

Latest trends on photodynamic disinfection of Gram-negative bacteria: photosensitizer's structure and delivery systems

Antimicrobial resistance is threatening to overshadow last century's medical advances. Etiological agents of previously eradicated infectious diseases are now resurgent as multidrug-resistant strains, especially for Gram-negative strains. Finding new therapeutic solutions is a real challenge for our society. In this framework, Photodynamic Antimicrobial ChemoTherapy relies on the generation of toxic reactive oxygen species in the presence of light, oxygen, and a photosensitizer molecule. The use of reactive oxygen species is common for disinfection processes, using chemical agents, such as chlorine and hydrogen peroxide, and as they do not have a specific molecular target, it decreases the potential of tolerance to the antimicrobial treatment. However, light-driven generated reactive species result in an interesting alternative, as reactive species generation can be easily tuned with light irradiation and several PSs are known for their low environmental impact. Over the past few years, this topic has been thoroughly studied, exploring strategies based on single-molecule PSs (tetrapyrrolic compounds, dipyrrinate derivatives, metal complexes, etc.) or on conjunction with delivery systems. The present work describes some of the most relevant advances of the last 6 years, focusing on photosensitizers design, formulation, and potentiation, aiming for the disinfection of Gram-negative bacteria.

Recent Strategies to Develop Innovative Photosensitizers for Enhanced Photodynamic Therapy

This review presents a robust strategy to design photosensitizers (PSs) for various species. Photodynamic therapy (PDT) is a photochemical-based treatment approach that involves the use of light combined with a light-activated chemical, referred to as a PS. Attractively, PDT is one of the alternatives to conventional cancer treatment due to its noninvasive nature, high cure rates, and low side effects. PSs play an important factor in photoinduced reactive oxygen species (ROS) generation. Although the concept of photosensitizer-based photodynamic therapy has been widely adopted for clinical trials and bioimaging, until now, to our surprise, there has been no relevant review article on rational designs of organic PSs for PDT. Furthermore, most of published review articles in PDT focused on nanomaterials and nanotechnology based on traditional PSs. Therefore, this review aimed at reporting recent strategies to develop innovative organic photosensitizers for enhanced photodynamic therapy, with each example described in detail instead of providing only a general overview, as is typically done in previous reviews of PDT, to provide intuitive, vivid, and specific insights to the readers.

Progress on photocatalytic semiconductor hybrids for bacterial inactivation

Due to its use of green and renewable energy and negligible bacterial resistance, photocatalytic bacterial inactivation is to be considered a promising sterilization process. Herein, we explore the relevant mechanisms of the photoinduced process on the active sites of semiconductors with an emphasis on the active sites of semiconductors, the photoexcited electron transfer, ROS-induced toxicity and interactions between semiconductors and bacteria. Pristine semiconductors such as metal oxides (TiO₂ and ZnO) have been widely reported; however, they suffer some drawbacks such as narrow optical response and high photogenerated carrier recombination. Herein, some typical modification strategies will be discussed including noble metal doping, ion doping, hybrid heterojunctions and dye sensitization. Besides, the biosafety and biocompatibility issues of semiconductor materials are also considered for the evaluation of their potential for further biomedical applications. Furthermore, 2D materials have become promising candidates in recent years due to their wide optical response to NIR light, superior antibacterial activity and favorable biocompatibility. Besides, the current research limitations and challenges are illustrated to introduce the appealing directions and design considerations for the future development of photocatalytic semiconductors for antibacterial applications.

Photodynamic disinfection and its role in controlling infectious diseases

Photodynamic therapy is witnessing a revival of its origins as a response to the rise of multi-drug resistant infections and the shortage of new classes of antibiotics. Photodynamic disinfection (PDDI) of microorganisms is making progresses in preclinical models and in clinical cases, and the perception of its role in the clinical armamentarium for the management of infectious diseases is changing. We review the positioning of PDDI from the perspective of its ability to respond to clinical needs. Emphasis is placed on the pipeline of photosensitizers that proved effective to inactivate biofilms, showed efficacy in animal models of infectious diseases or reached clinical trials. Novel opportunities resulting from the COVID-19 pandemic are briefly discussed. The molecular features of promising photosensitizers are emphasized and contrasted with those of photosensitizers used in the treatment of solid tumors. The development of photosensitizers has been accompanied by the fabrication of a variety of affordable and customizable light sources. We critically discuss the combination between photosensitizer and light source properties that may leverage PDDI and expand its applications to wider markets. The success of PDDI in the management of infectious diseases will ultimately depend on the efficacy of photosensitizers, affordability of the light sources, simplicity of the procedures, and availability of fast and efficient treatments.

Umbelliferone Decorated Water-soluble Zinc(II) Phthalocyanines - In Vitro Phototoxic Antimicrobial Anti-cancer Agents

In this contribution we report on the synthesis, characterization and application of water-soluble zinc(II) phthalocyanines, which are decorated with four or eight umbelliferone moieties for photodynamic therapy (PDT). These compounds are linked peripherally to zinc(II) phthalocyanine by a triethylene glycol linker attached to pyridines, leading to cationic pyridinium units, able to increase the water solubility of the system. Beside their photophysical properties they were analyzed concerning their cellular distribution in human hepatocyte carcinoma (HepG2) cells as well as their phototoxicity towards HepG2 cells, Gram-positive (S. aureus strain 3150/12 and B. subtilis strain DB104) and Gram-negative bacteria (E. coli strain UTI89 and E. coli strain Nissle 1917). At low light doses and concentrations, they exhibit superb antimicrobial activity against Gram-positive bacteria as well as anti-tumor activity against HepG2. They are even capable to inactivate Gram-negative bacteria, whereas the dark toxicity remains low. These unique water-soluble compounds can be regarded as all-in-one type photosensitizers with broad applications ranges in the future.

A Janus-Type Phthalocyanine for the Assembly of Photoactive DNA Origami Coatings

Design and synthesis of novel photosensitizer architectures is a key step toward new multifunctional molecular materials. Photoactive Janus-type molecules provide interesting building blocks for such systems by presenting two well-defined chemical functionalities that can be utilized orthogonally. Herein a multifunctional phthalocyanine is reported, bearing a bulky and positively charged moiety that hinders their aggregation while providing the ability to adhere on DNA origami nanostructures via reversible electrostatic interactions. On the other hand, triethylene glycol moieties render a water-soluble and chemically inert corona that can stabilize the structures. This approach provides insight into the molecular design and synthesis of Janus-type sensitizers that can be combined with biomolecules, rendering optically active biohybrids.

Turning Photons into Drugs: Phthalocyanine-Based Photosensitizers as Efficient Photoantimicrobials

One of the most promising alternatives for treating bacterial infections is antimicrobial photodynamic therapy (aPDT), making the synthesis and application of new photoactive compounds called photosensitizers (PS) a dynamic research field. In this regard, phthalocyanine (Pc) derivatives offer great opportunities due to their extraordinary light-harvesting and tunable electronic properties, structural versatility, and stability. This Review, rather than focusing on synthetic strategies, intends to overview current progress in the structural design strategies for Pcs that could achieve effective photoinactivation of microorganisms. In addition, the Review provides a concise look into the recent developments and applications of nanocarrier-based Pc delivery systems.

The bimetallic and the anchoring group effects on both optical and charge transport properties of hexaphyrin amethyrin

Bimetallic Cu(ii)-hexaphyrin amethyrin proposed as a molecular switch operated by the application of an external magnetic field.