Advances and approaches for chemical recycling of plastic waste

Plastic particle impacts on the cardiovascular system and angiogenesis potential

The extensive application of plastics in different sectors such as packaging, building, textiles, consumer products, and several industries has increased in recent years. Emerging data have confirmed that plastic wastes and segregates are problematic issues in aquatic and terrestrial ecosystems. The decomposition of plastic particles (PPs) leads to the release of microplastics (MPs) and nanoplastics (NPs) into the surrounding environment and entry of these particles will be problematic in unicellular and multicellular creatures. It was suggested that PPs can easily cross all biological barriers and reach different organs, especially the cardiovascular system, with the potential to modulate several molecular pathways. It is postulated that the direct interaction of PPs with cellular and subcellular components induces genotoxicity and cytotoxicity within the cardiovascular system. Meanwhile, being inert carriers, PPs can intensify the toxicity of other contaminants inside the cardiovascular system. Here, in this review article, several underlying mechanisms related to PP toxicity in the cardiovascular system were discussed in detail.

Role of quality assessment of the recycled packaging material in determining its safety profile as food contact material

Food packaging waste significantly impacts global environmental changes, prompting the adoption of a green circular economy approach. Recycling packaging waste is a critical element of this strategy. However, it faces challenges related to the quality of recycled materials and concerns about their safety. Thus, this review aimed to highlight different analytical methods alone or in combination to evaluate the quality of the recycled material. Furthermore, the safety and health aspects related to the migration of contaminants and their relevant regulations have also been discussed. An important parameter while selecting an appropriate recycling method is the composition and nature of the recyclate, for instance, HDPE (High-Density Polyethylene), PET (Polyethylene Terephthalate), and PP (Polypropylene) materials can be recycled using mechanical and chemical recycling, however, PVC (Polyvinyl Chloride) and PS (Polystyrene) present challenges during mechanical recycling due to lower molecular weight and complex compositions, thus are often downcycled into lower-grade products. Still, recycled papers can be more problematic than recycled plastics due to the nature of the materials and the impact of recycling. The literature review suggested that three quality properties i.e., presence of low molecular weight compounds, degree of degradation, and composition should be analyzed by using different spectroscopic, thermo-mechanical, and chromatographic techniques to obtain a detailed understanding of recycled material quality. Furthermore, recycling should be done in such a way that the migration of contaminants should be lower than the migratory limits set by the relevant authorities to avoid any toxicological effects.

From Plastic Waste to Green Hydrogen and Valuable Chemicals Using Sunlight and Water

Over 79 % of 6.3 billion tonnes of plastics produced from 1950 to 2015 have been disposed in landfills or found their way to the oceans, where they will reside for up to hundreds of years before being decomposed bringing upon significant dangers to our health and ecosystems. Plastic photoreforming offers an appealing alternative by using solar energy and water to transform plastic waste into value-added chemical commodities, while simultaneously producing green hydrogen via the hydrogen evolution reaction. This review aims to provide an overview of the underlying principles of emerging plastic photoreforming technologies, highlight the challenges associated with experimental protocols and performance assessments, discuss recent global breakthroughs on the photoreforming of plastics, and propose perspectives for future research. A critical assessment of current plastic photoreforming studies shows a lack of standardised conditions, hindering comparison amongst photocatalyst performance. Guidelines to establish a more accurate evaluation of materials and systems are proposed, with the aim to facilitate the translation of promising fundamental discovery in photocatalysts design.

Catalyst- and Solvent-Free Upcycling of Poly(Ethylene Terephthalate) Waste to Biodegradable Plastics

Poly(ethylene terephthalate) (PET) is an important polymer with annual output second only to polyethylene. Due to its low biodegradability, a large amount of PET is recycled for sustainable development. However, current strategies for PET recycling are limited by low added value or small product scale. It is urgent to make a breakthrough on the principle of PET macromolecular reaction and efficiently prepare products with high added value and wide applications. Here, the catalyst- and solvent-free synthesis of biodegradable plastics are reported through novel carboxyl-ester transesterification between PET waste and bio-based hydrogenated dimer acid (HDA), which can directly substitute some terephthalic acid (TPA) units in PET chain by HDA unit. This macromolecular reaction can be facilely carried out on current equipment in the polyester industry without any additional catalyst and solvent, thus enabling low-cost and large-scale production. Furthermore, the product semi-bio-based copolyester shows excellent mechanical properties, regulable flexibility and good biodegradability, which is expected to substitute poly(butylene adipate-co-terephthalate) (PBAT) plastic as high value-added biodegradable materials. This work provides an environmental-friendly and economic strategy for the large-scale upcycling of PET waste.

Anthropogenic stressors and the marine environment: From sources and impacts to solutions and mitigation

Human-released contaminants are often poorly understood wholistically in marine ecosystems. This review examines the sources, pathways, impacts on marine animals, and mitigation strategies of five pollutants (plastics, per- and polyfluoroalkyl substances, bisphenol compounds, ethynylestradiol, and petroleum hydrocarbons). Both abiotic and biotic mechanisms contribute to all five contaminants' movement. These pollutants cause short- and long-term effects on many biological processes genetically, molecularly, neurologically, physiologically, reproductively, and developmentally. We explore the extension of adverse outcome pathways to ecosystem effects by considering known inter-generational and trophic relations resulting in large-scale direct and indirect impacts. In doing so, we develop an understanding of their roles as environmental stressors in marine environments for targeted mitigation and future work. Ecosystems are interconnected and so international collaboration, standards, measures preceding mass production, and citizen involvement are required to protect and conserve marine life.

Impact of bioplastic contamination on the mechanical recycling of conventional plastics

Quality assurance of a recycled product is currently one of the biggest issues that the plastic recycling industry faces. The purity of the input plastic waste stream has significant influence over the quality of the recycled product. This research evaluated the impact of polylactic acid (PLA) contamination within the input waste stream of high-density polyethylene (HDPE) recycling. The ultimate tensile strength was noted to reduce by 50% when PLA contamination was at 10%. An investigation into the effect that UVA radiation (simulating solar radiation) has on HDPE contaminated with PLA was also performed to determine the long-term effect of the bioplastic contamination. After UVA treatment, the ultimate tensile strength was reported to reduce by 51% when PLA contamination was only at 2.5%. A water contact angle analysis indicated the PLA contamination increased the hydrophilic nature of the HDPE sheets, potentially creating issues if the intended use of the recycled product was to store liquids. Microscopic analysis of the HDPE sheets contaminated with PLA showed deformations, ridges, cracks, and holes appear on the surface due to the immiscibility of the two polymers that was confirmed by FTIR analysis. Colour changes were visibly noted, with UVA exposure increasing the rate of colour change. Based on the findings in this study, PLA contamination of even 1% in a HDPE waste stream would significantly reduce the quality of the recycled product.

Metal-free electrocatalytic upcycling of polyethylene terephthalate plastic to C2 products

Polyethylene terephthalate (PET) is one of the most used polymers, but the non-degradable and persistent nature of PET waste in the environment is a global menace. Hence upcycling PET waste becomes indispensable. Herein, we introduce the first metal-free electrochemical-upcycling of PET into value-added chemicals and H2 fuel using an organo-electrocatalyst (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl (TEMPO). Electrolysis at pH 10 produces glycolate and oxalate exclusively while at pH 14, over-oxidation and subsequent C-C bond cleavage produce formate and carbonate as well. Tuning the rate and product selectivity via pH regulation with mechanistic insight displays a sustainable route to implement waste PET recycling.

A new strategy for PET depolymerization: Application of bimetallic MOF-74 as a selective catalyst

Large-volume production of poly(ethylene terephthalate) (PET), especially in the form of bottles and food packaging containers, causes problems with polymer waste management. Waste PET could be recycled thermally, mechanically or chemically and the last method allows to obtain individual monomers, but most often it is carried out in the presence of homogeneous catalysts, that are difficult to separate and reuse. In view of this, this work reports for the first time, application of bimetallic MOF-74 - as heterogeneous catalyst - for depolymerization of PET with high monomer (bishydroxyethyl terephthalate, BHET) recovery. The effect of type and amount of second metal in the MOF-74 (Mg/M) was systematically investigated. The results showed increased activity of MOF-74 (Mg/M) containing Co2+, Zn2+ and Mn2+ as a second metal, while the opposite correlation was observed for Cu2+ and Ni2+. It was found that the highest catalytic activity was demonstrated by the introduction of Mg-Mn into MOF-74 with ratio molar 1:1, which resulted in complete depolymerization of PET and 91.8% BHET yield within 4 h. Furthermore, the obtained catalyst showed good stability in 5 reaction cycles and allowed to achieve high-purity BHET, which was confirmed by HPLC analysis. The as-prepared MOF-74 (Mg/Mn) was easy to separate from the post-reaction mixture, clean and reuse in the next depolymerization reaction.

Probiotics an emerging therapeutic approach towards gut-brain-axis oriented chronic health issues induced by microplastics: A comprehensive review

Applications for plastic polymers can be found all around the world, often discarded without any prior care, exacerbating the environmental issue. When large waste materials are released into the environment, they undergo physical, biological, and photo-degradation processes that break them down into smaller polymer fragments known as microplastics (MPs). The time it takes for residual plastic to degrade depends on the type of polymer and environmental factors, with some taking as long as 600 years or more. Due to their small size, microplastics can contaminate food and enter the human body through food chains and webs, causing gastrointestinal (GI) tract pain that can range from local to systemic. Microplastics can also acquire hydrophobic organic pollutants and heavy metals on their surface, due to their large surface area and surface hydrophobicity. The levels of contamination on the microplastic surface are significantly higher than in the natural environment. The gut-brain axis (GB axis), through which organisms interact with their environment, regulate nutritional digestion and absorption, intestinal motility and secretion, complex polysaccharide breakdown, and maintain intestinal integrity, can be altered by microplastics acting alone or in combination with pollutants. Probiotics have shown significant therapeutic potential in managing various illnesses mediated by the gut-brain axis. They connect hormonal and biochemical pathways to promote gut and brain health, making them a promising therapy option for a variety of GB axis-mediated illnesses. Additionally, taking probiotics with or without food can reduce the production of pro-inflammatory cytokines, reactive oxygen species (ROS), neuro-inflammation, neurodegeneration, protein folding, and both motor and non-motor symptoms in individuals with Parkinson's disease. This study provides new insight into microplastic-induced gut dysbiosis, its associated health risks, and the benefits of using both traditional and next-generation probiotics to maintain gut homeostasis.

Lifecycle Management for Sustainable Plastics: Recent Progress from Synthesis, Processing to Upcycling

Plastics, renowned for their outstanding properties and extensive applications, assume an indispensable and irreplaceable role in modern society. However, the ubiquitous consumption of plastic items has led to a growing accumulation of plastic waste. Unreasonable practices in the production, utilization, and recycling of plastics have led to substantial energy resource depletion and environmental pollution. Herein, the state-of-the-art advancements in the lifecycle management of plastics are timely reviewed. Unlike typical reviews focused on plastic recycling, this work presents an in-depth analysis of the entire lifecycle of plastics, covering the whole process from synthesis, processing, to ultimate disposal. The primary emphasis lies on selecting judicious strategies and methodologies at each lifecycle stage to mitigate the adverse environmental impact of waste plastics. Specifically, the article delineates the rationale, methods, and advancements realized in various lifecycle stages through both physical and chemical recycling pathways. The focal point is the attainment of optimal recycling rates for waste plastics, thereby alleviating the ecological burden of plastic pollution. By scrutinizing the entire lifecycle of plastics, the article aims to furnish comprehensive solutions for reducing plastic pollution and fostering sustainability across all facets of plastic production, utilization, and disposal.

Impact of Sacrificial Hydrogen Bonds on the Structure and Properties of Rubber Materials: Insights from All-Atom Molecular Dynamics Simulations

The inclusion of sacrificial hydrogen bonds is crucial for advancing high-performance rubber materials. However, the molecular mechanisms governing the impact of these bonds on material properties remain unclear, hindering progress in advanced rubber material research. This study employed all-atom molecular dynamics simulations to thoroughly investigate how hydrogen bonds affect the structure, dynamics, mechanics, and linear viscoelasticity of rubber materials. As the modified repeating unit ratio (β) increased, both interchain and intrachain hydrogen bond content rose, with interchain bonds playing a predominant role. This physical cross-linking network formed through interchain hydrogen bonds restricts molecular chain movement and relaxation and raises the glass transition temperature of rubber. Within a certain content of hydrogen bonds, the mechanical strength increases with increasing β. However, further increasing β leads to a subsequent decrease in the mechanical performance. Optimal mechanical properties were observed at β = 6%. On the other hand, a higher β value yields an elevated stress relaxation modulus and an extended stress relaxation plateau, signifying a more complex hydrogen-bond cross-linking network. Additionally, higher β increases the storage modulus, loss modulus, and complex viscosity while reducing the loss factor. In summary, this study successfully established the relationship between the structure and properties of natural rubber containing hydrogen bonds, providing a scientific foundation for the design of high-performance rubber materials.

Upcycling plastic waste into fully recyclable composites through cold sintering

Plastics have substantial societal benefits, but their widespread use has led to a critical waste management challenge. While mechanical recycling dominates the reuse of post-consumer plastics, it is limited in efficacy, especially for composites. To address this, we propose a direct reprocessing approach that enables the creation of hybrid, long-lasting, and durable composites from difficult-to-recycle plastics. This approach utilizes cold sintering, a process that consolidates inorganic powders through fractional dissolution and precipitation at temperatures far below conventional sintering; these temperatures are compatible with plastic processing. We show that this process can create inorganic-matrix composites with significant enhancements in tensile strength and toughness over pure gypsum, which is commonly found in construction waste. These composites can be recycled multiple times through direct reprocessing with the addition of only water as a processing promoter. This approach to recycling leads to composites with orders of magnitude lower energy demand, global warming potential, and water demand, when compared against common construction products. Altogether, we demonstrate the potential for cold sintering to integrate waste into high-performance recyclable composites.

Microbial degradation of low-density polyethylene (LDPE) and polystyrene using Bacillus cereus (OR268710) isolated from plastic-polluted tropical coastal environment

The study focused on marine bacteria, specifically Bacillus cereus, sourced from heavily polluted coastal areas in Tamil Nadu, aiming to assess their efficacy in degrading low-density polyethylene (LDPE) and polystyrene over a 42-day period. When LDPE and polystyrene films were incubated with Bacillus cereus, they exhibited maximum weight losses of 4.13 ± 0.81 % and 14.13 ± 2.41 %, respectively. Notably, polystyrene exhibited a higher reduction rate (0.0036 day-1) and a shorter half-life (195.29 days). SEM images of the treated LDPE and polystyrene unveiled surface erosion with cracks. The energy dispersive X-ray (EDX) analysis revealed elevated carbon content and the presence of oxygen in the treated LDPE and polystyrene films. The ATR-FTIR spectra exhibited distinctive peaks corresponding to functional groups, with observable peak shifts in the treated films. Notable increases were detected in carbonyl, internal double bond, and vinyl indices across all treated groups. Additionally, both treated LDPE and polystyrene showed reduced crystallinity. This research sheds light on Bacillus cereus (OR268710) biodegradation capabilities, emphasizing its potential for eco-friendly waste management in coastal regions.

An Overview of Recycling Phenolic Resin

Over a century ago, phenolic formaldehyde (PF) resin was developed and continues to increase in yield due to its diverse applications. However, PF resin is a thermosetting plastic lacking fluidity and moldability, which are nondegradable in natural environments, leading to severe threats to fossil resources as well as global environmental crises. As a result, recycling PF resin is extremely important. In this review, we provide the recent advances in the recycling of PF resin, which includes mechanical recycling, chemical recycling, and utilization of carbon-based materials. The advantages and disadvantages of each strategy are evaluated from a green chemistry perspective. This article aims to attract interest in PF resin design, synthesizing, application and recycling, offering useful suggestions.

A review on value-addition to plastic waste towards achieving a circular economy

Plastic and mixed plastic waste (PW) has received increased worldwide attention owing to its huge rate of production, high persistency in the environment, and unsustainable waste management practices. Therefore, sustainable PW management and upcycling approaches are imperative to achieve the objectives of the United Nations Sustainable Development Goals. Numerous recent studies have shown the application and feasibility of various PW conversion techniques to produce materials with better economic value. Within this framework, the current review provides an in-depth analysis of cutting-edge thermochemical technologies such as pyrolysis, gasification, carbonization, and photocatalysis that can be used to value plastic and mixed PW in order to produce energy and industrial chemicals. Additionally, a thorough examination of the environmental impacts of contemporary PW upcycling techniques and their commercial feasibility through life cycle assessment (LCA) and techno-economical assessment are provided in this review. Finally, this review emphasizes the opportunities and challenges accompanying with existing PW upcycling techniques and deliver recommendations for future research works.

Environmental impacts of circularity strategies for social distancing plastic shields made of polymethyl methacrylate in the United States

One application of plastics that grew during the COVID-19 pandemic is for social distancing plastic shields, or protective barriers, made from polymethyl methacrylate (PMMA) such as transparent face guards. Although available for other applications, end-of-life impacts for barriers are currently lacking in the literature, and there is a need to fill in this gap to guide decisions. This study evaluated the end-of-life environmental impacts of PMMA barriers in the United States by using life cycle assessment. We evaluated five strategies including landfilling, waste-to-energy, mechanical recycling, chemical recycling and reuse. Data were sourced from literature and various life cycle inventory databases. The Tool for Reduction and Assessment of Chemicals and Other Environmental Impacts (TRACI) was used as the life cycle impact assessment method. Landfilling exhibited the highest impact in all indicators and reuse demonstrated optimal results for global warming potential. A scenario analysis was conducted to explore a combination of strategies, revealing that the most promising approach involved a mix of 40% reuse, 20% mechanical recycling and 40% chemical recycling. Circular economy recommendations are proposed for managing these sources of plastic waste in the United States.

Polymer Waste Valorization into Advanced Carbon Nanomaterials for Potential Energy and Environment Applications

The rise in universal population and accompanying demands have directed toward an exponential surge in the generation of polymeric waste. The estimate predicts that world-wide plastic production will rise to ≈590 million metric tons by 2050, whereas 5000 million more tires will be routinely abandoned by 2030. Handling this waste and its detrimental consequences on the Earth's ecosystem and human health presents a significant challenge. Converting the wastes into carbon-based functional materials viz. activated carbon, graphene, and nanotubes is considered the most scientific and adaptable method. Herein, this world provides an overview of the various sources of polymeric wastes, modes of build-up, impact on the environment, and management approaches. Update on advances and novel modifications made in methodologies for converting diverse types of polymeric wastes into carbon nanomaterials over the last 5 years are given. A remarkable focus is made to comprehend the applications of polymeric waste-derived carbon nanomaterials (PWDCNMs) in the CO2 capture, removal of heavy metal ions, supercapacitor-based energy storage and water splitting with an emphasis on the correlation between PWDCNMs' properties and their performances. This review offers insights into emerging developments in the upcycling of polymeric wastes and their applications in environment and energy.

Keratin-based bioplastics extracted from chicken feathers: Effect of chitosan concentration on the structural, chemical bonding, and mechanical properties of bioplastics

Keratin was synthesized by alkaline hydrolysis from chicken feathers and then continue by casting method for producing bioplastics with additional various amounts of chitosan as a filler, polyvinyl alcohol (PVA) and glycerol as a plasticizer. The main purpose is analysis the effect of chitosan on the structural properties using quantitative analysis of X-ray diffraction (XRD) spectra, chemical bonding by Fourier transforms infrared (FTIR) spectra, and mechanical properties by texture analyser to the keratin-based bioplastics. Biodegradation of bioplastics was analysed from the loss of weight by burying in the soil. It's found that, the additional of chitosan (0 %, 2 %, 5 %, and 8 %) increased the crystallinity of bioplastics by 11.83 %, 11.12 %, 18.99 %, and 17.03 %, respectively, but decreasing tensile strength and elasticity of bioplastics. Degradation of bioplastic keratin-based shows that the addition of chitosan can reduce the degradation time which is directly proportional to the loss of CO bonds. The highest degradation rate is 89.29 % in 49 days for keratin-based bioplastics with 8 % chitosan, indicated that high potential for future production.

Degradation of Poly(ethylene terephthalate) Catalyzed by Nonmetallic Dibasic Ionic Liquids under UV Radiation

Nonmetallic ionic liquids (ILs) exhibit unique advantages in catalyzing poly (ethylene terephthalate) (PET) glycolysis, but usually require longer reaction times. We found that exposure to UV radiation can accelerate the glycolysis reaction and significantly reduce the reaction time. In this work, we synthesized five nonmetallic dibasic ILs, and their glycolysis catalytic activity was investigated. 1,8-diazabicyclo [5,4,0] undec-7-ene imidazole ([HDBU]Im) exhibited better catalytic performance. Meanwhile, UV radiation is used as a reinforcement method to improve the PET glycolysis efficiency. Under optimal conditions (5 g PET, 20 g ethylene glycol (EG), 0.25 g [HDBU]Im, 10,000 µW·cm-2 UV radiation reacted for 90 min at 185 °C), the PET conversion and BHET yield were 100% and 88.9%, respectively. Based on the UV-visible spectrum, it was found that UV radiation can activate the C=O in PET. Hence, the incorporation of UV radiation can considerably diminish the activation energy of the reaction, shortening the reaction time of PET degradation. Finally, a possible reaction mechanism of [HDBU]Im-catalyzed PET glycolysis under UV radiation was proposed.

Multifunctional Block Copolymers, Acting as Recycling Aids, by Atom Transfer Radical Polymerization

Block copolymers utilizing oligomeric poly(pentylene-co-hexylene carbonate)diol modified with 2,4-diisocyanatotoluene and further with 2-bromo-N-(3-hydroxypropyl)-2-methylpropanamide were synthesized and utilized as Activators ReGenerated by Electron Transfer Atom Transfer Radical Polymerization macroinitiators to obtain a first generation of multifunctional recycling additives with poly(glycidyl methacrylate-co-butyl methacrylate-co-methyl methacrylate) side chains, which could act as chain extenders. Then, chosen additive was reacted with a radical scavenger, 3,5-ditertbutyl-4-hydroxybenzoic acid (DHBA), to obtain a second generation of reactive additives. Those copolymers had different numbers of epoxy groups per polymer chain, and different number of epoxides opened with DHBA, hence showed a range of properties, and were utilized as reactive modifiers for polylactide (PLA) extrusion melting. The first-generation modifiers caused an increase in PLA's blends relative melt viscosity, stabilized material properties, and enhanced impact strength, while the second-generation modifiers with more than 8 % of epoxide ring opened showed worse properties. However, they managed to suppress the UV degradation of PLA blend plates.

Selective Upcycling of Polyethylene Terephthalate towards High-valued Oxygenated Chemical Methyl p-Methyl Benzoate using a Cu/ZrO2 Catalyst

Upgrading of polyethylene terephthalate (PET) waste into valuable oxygenated molecules is a fascinating process, yet it remains challenging. Herein, we developed a two-step strategy involving methanolysis of PET to dimethyl terephthalate (DMT), followed by hydrogenation of DMT to produce the high-valued chemical methyl p-methyl benzoate (MMB) using a fixed-bed reactor and a Cu/ZrO2 catalyst. Interestingly, we discovered the phase structure of ZrO2 significantly regulates the selectivity of products. Cu supported on monoclinic ZrO2 (5 %Cu/m-ZrO2 ) exhibits an exceptional selectivity of 86 % for conversion of DMT to MMB, while Cu supported on tetragonal ZrO2 (5 %Cu/t-ZrO2 ) predominantly produces p-xylene (PX) with selectivity of 75 %. The superior selectivity of MMB over Cu/m-ZrO2 can be attributed to the weaker acid sites present on m-ZrO2 compared to t-ZrO2 . This weak acidity of m-ZrO2 leads to a moderate adsorption capability of MMB, and facilitating its desorption. Furthermore, DFT calculations reveal Cu/m-ZrO2 catalyst shows a higher effective energy barrier for cleavage of second C-O bond compared to Cu/t-ZrO2 catalyst; this distinction ensures the high selectivity of MMB. This catalyst not only presents an approach for upgrading of PET waste into fine chemicals but also offers a strategy for controlling the primary product in a multistep hydrogenation reaction.

Commercialization potential of PET (polyethylene terephthalate) recycled nanomaterials: A review on validation parameters

Polyethylene Terephthalate (PET) is a polymer which is considered as one of the major contaminants to the environment. The PET waste materials can be recycled to produce value-added products. PET can be converted to nanoparticles, nanofibers, nanocomposites, and nano coatings. To extend the applications of PET nanomaterials, understanding its commercialization potential is important. In addition, knowledge about the factors affecting recycling of PET based nanomaterials is essential. The presented review is focused on understanding the PET commercialization aspects, keeping in mind market analysis, growth drivers, regulatory affairs, safety considerations, issues associated with scale-up, manufacturing challenges, economic viability, and cost-effectiveness. In addition, the paper elaborates the challenges associated with the use of PET based nanomaterials. These challenges include PET contamination to water, soil, sediments, and human exposure to PET nanomaterials. Moreover, the paper discusses in detail about the factors affecting PET recycling, commercialization, and circular economy with specific emphasis on life cycle assessment (LCA) of PET recycled nanomaterials.

Catalytic Strategies for the Upcycling of Polyolefin Plastic Waste

Chemical upgrading of waste plastics is currently one of the most important methods for addressing plastic pollution. In comparison to the current methods of incineration or landfill, chemical upgrading enables the utilization of carbon and hydrogen elements in waste plastics as resources. This process strongly relies on efficient catalysts and reaction systems. Through catalyst design, waste plastics can be converted into fuels or chemicals under the optimized reaction conditions, extending their life cycles. In this review, we systematically discuss various chemical conversion methods for polyolefin waste plastics, which account for a large proportion of waste plastics. We further explore the remaining challenges and future development trends in this field, including improving product value through product engineering and shifting research perspectives to exploring the tolerance of catalysts toward impurities in practical waste plastic waste rather than using pure plastic feedstock.

The Facile Synthesis and Application of Mesoporous Silica Nanoparticles with a Vinyl Functional Group for Plastic Recycling

Due to growing concerns about environmental pollution from plastic waste, plastic recycling research is gaining momentum. Traditional methods, such as incorporating inorganic particles, increasing cross-linking density with peroxides, and blending with silicone monomers, often improve mechanical properties but reduce flexibility for specific performance requirements. This study focuses on synthesizing silica nanoparticles with vinyl functional groups and evaluating their mechanical performance when used in recycled plastics. Silica precursors, namely sodium silicate and vinyltrimethoxysilane (VTMS), combined with a surfactant, were employed to create pores, increasing silica's surface area. The early-stage introduction of vinyl functional groups prevented the typical post-synthesis reduction in surface area. Porous silica was produced in varying quantities of VTMS, and the synthesized porous silica nanomaterials were incorporated into recycled polyethylene to induce cross-linking. Despite a decrease in surface area with increasing VTMS content, a significant surface area of 883 m2/g was achieved. In conclusion, porous silica with the right amount of vinyl content exhibited improved mechanical performance, including increased tensile strength, compared to conventional porous silica. This study shows that synthesized porous silica with integrated vinyl functional groups effectively enhances the performance of recycled plastics.

Integrating PET chemical recycling with pyrolysis of mixed plastic waste via pressureless alkaline depolymerization in a hydrocarbon solvent

This study presents a proof of concept for a technology train that integrates polyethylene terephthalate (PET) recovery from mixed plastic waste and plastic pyrolysis. PET is depolymerized into terephthalic acid (TPA) by hydrolysis using a low volatility oil as medium, which enables (i) low-pressure operation, and (ii) a selective separation and recovery of TPA from the product mix by a simple process of filtration, washing, and precipitation. Full PET conversion and high TPA recovery (>98 %) were achieved at 260 °C. This technology train is demonstrated to be effective for processing mixed waste streams, leading to higher yield and quality of liquid product from thermal pyrolysis when compared with feedstock that has not been pre-treated. Further, the technology could be readily integrated with a plastics pyrolysis process, whereby a by-product from the pyrolysis could be used as the low-volatility oil.

Indirect daylight oxidative degradation of polyethylene microplastics by a bio-waste modified TiO2-based material

Microplastics are recognized as an emerging critical issue for the environment. Here an innovative chemical approach for the treatment of microplastics is proposed, based on an oxidative process that does not require any direct energy source (irradiation or heat). Linear low-density polyethylene (LLDPE) was selected as target commodity polymer, due to its widespread use, chemical inertness and inefficient recycling. This route is based on a hybrid material coupling titanium oxide with a bio-waste, rosin, mainly constituted by abietic acid, through a simple sol-gel synthesis procedure. The ligand-to-metal charge transfer complexes formed between rosin and Ti4+ allow the generation of reactive oxygen species without UV irradiation for its activation. In agreement with theorical calculations, superoxide radical ions are stabilized at ambient conditions on the surface of the hybrid TiO2. Consequently, an impressive degradation of LLDPE is observed after 1 month exposure in a batch configuration under indirect daylight, as evidenced by the products revealed by gas chromatography-mass spectrometry analysis and by chemical and structural modifications of the polymer surface. In a context of waste exploitation, this innovative and sustainable approach represents a promising cost-effective strategy for the oxidative degradation of microplastics, without producing any toxic by-products.

Understanding Structure-Activity Relationship in Pt-loaded g-C3 N4 for Efficient Solar- Photoreforming of Polyethylene Terephthalate Plastic and Hydrogen Production

Coupling the hydrogen evolution reaction with plastic waste photoreforming provides a synergistic path for simultaneous production of green hydrogen and recycling of post-consumer products, two major enablers for establishment of a circular economy. Graphitic carbon nitride (g-C3 N4 ) is a promising photocatalyst due to its suitable optoelectronic and physicochemical properties, and inexpensive fabrication. Herein, a mechanistic investigation of the structure-activity relationship of g-C3 N4 for poly(ethylene terephthalate) (PET) photoreforming is reported by carefully controlling its fabrication from a subset of earth-abundant precursors, such as dicyandiamide, melamine, urea, and thiourea. These findings reveal that melamine-derived g-C3 N4 with 3 wt.% Pt has significantly higher performance than alternative derivations, achieving a maximum hydrogen evolution rate of 7.33 mmolH2  gcat -1  h-1 , and simultaneously photoconverting PET into valuable organic products including formate, glyoxal, and acetate, with excellent stability for over 30 h of continuous production. This is attributed to the higher crystallinity and associated chemical resistance of melamine-derived g-C3 N4 , playing a major role in stabilization of its morphology and surface properties. These new insights on the role of precursors and structural properties in dictating the photoactivity of g-C3 N4 set the foundation for the further development of photocatalytic processes for combined green hydrogen production and plastic waste reforming.

Mitigating microplastic pollution: A critical review on the effects, remediation, and utilization strategies of microplastics

Microplastics are found ubiquitous in the natural environment and are an increasing source of worry for global health. Rapid industrialization and inappropriate plastic waste management in our daily lives have resulted in an increase in the amount of microplastics in the ecosystem. Microplastics that are <150 μm in size could be easily ingested by living beings and cause considerable toxicity. Microplastics can aggregate in living organisms and cause acute, chronic, carcinogenic, developmental, and genotoxic damage. As a result, a sustainable approach to reducing, reusing, and recycling plastic waste is required to manage microplastic pollution in the environment. However, there is still a significant lack of effective methods for managing these pollutants. As a result, the purpose of this review is to convey information on microplastic toxicity and management practices that may aid in the reduction of microplastic pollution. This review further insights on how plastic trash could be converted as value-added products, reducing the load of accumulating plastic wastes in the environment, and leading to a beneficial endeavor for humanity.

Highly selective pressure-dependent (transfer) hydrogenative depolymerization of polybutylene succinate

Ru-MACHO®-BH is an effective catalyst for controlled depolymerization of polybutylene succinate. Under low pressure hydrogen the catalyst produces gamma-butyrolactone via a novel transfer hydrogenation wherein dehydrogenation and hydrogenation deconstruct the polymer chain. Simply increasing the hydrogen pressure selectively generates 1,4-butanediol.

Recent progress on biodegradable polylactic acid based blends and their biocomposites: A comprehensive review

Being less dependent on non-renewable resources as well as protecting the environment from waste streams have become two critical primers for a global movement toward replacing conventional plastics with renewable and biodegradable polymers. Despite all these efforts, only a few biodegradable polymers have paved their way successfully into the market. Polylactic acid is one of these biodegradable polymers that has been investigated thoroughly by researchers as well as manufactured on a large industrial scale. It is synthesized from lactic acid obtained mainly from the biological fermentation of carbohydrates, which makes this material a renewable polymer. Besides its renewability, it benefits from some attractive mechanical performances including high strength and stiffness, though brittleness is a major drawback of this biopolymer. Accordingly, the development of blends and biocomposites based on polylactic acid with highly flexible biodegradable polymers, specifically poly(butylene adipate co terephthalate) has been the objective of many investigations recently. This paper focuses on the blends and biocomposites based on these two biopolymers, specifically their mechanical, rheological, and biodegradation, the main characteristics that are crucial for being considered as a biodegradable substitution for conventional non-biodegradable polymers.

Oxidative Depolymerization of Polyphenylene Oxide into Benzoquinone

Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) is one of the most important engineering plastics commonly utilized in various fields. Herein, chemical recycling of PPO was performed via oxidative depolymerization to form 2,6-diemthyl-p-benzoquionone (26DMBQ) as a sole aromatic product in 66 % yield using nitronium ions (NO2 + ) as a mild oxidant. Mechanistic studies revealed that PPO is oxidized by NO2 + generated from the combination of a silicotungstic acid and nitrate salts, and then subsequently attacked by H2 O to achieve C-O bond cleavage, resulting in the formation of 26DMBQ, which was sublimed at the headspace of the reaction vessel in pure form. 26DMBQ was applied to polymerization with dianilines to form polyimides. Thus, an upgrade recycling process of PPO was demonstrated.

Solution plasma synthesis of Pt-decorated Bi12O17Cl2 photocatalysts for efficient upcycling of plastics

Photocatalytic upcycling of plastic waste is a promising approach to relieving pressure caused by solid waste, but the rational design of novel efficient photocatalysts remains a challenge. Herein, we utilize subnano-sized platinum (Pt)-based photocatalysts for plastic upcycling. A solution plasma strategy is developed to fabricate Pt-decorated Bi12O17Cl2 (SP-BOC). The Pt in an oxidant state and oxygen vacancies optimize the electronic structure for fast charge transfer. As a result, SP-BOC displays high performance for upcycling polyvinyl chloride (PVC) and polylactic acid (PLA) into acetic acid and formic acid, with yield rate and selectivity of 6.07 mg g-1cat. h-1 and 94 %, and 47.43 mg g-1cat. h-1 and 55.1 %, respectively. In addition, the dichlorination efficiency of PVC reaches 78.1 % within 10 h reaction, effectively reducing the environmental hazards associated with PVC waste disposal treatments. This research provides insight into the effective conversion of plastics into high-value chemicals, contributing to the reduction of carbon and toxic emissions in a practical and meaningful way, and offering a useful way for solving challenges of waste management and environmental sustainability.

Entropy Confinement Promotes Hydrogenolysis Activity for Polyethylene Upcycling

Chemical upcycling that catalyzes waste plastics back to high-purity chemicals holds great promise in end-of-life plastics valorization. One of the main challenges in this process is the thermodynamic limitations imposed by the high intrinsic entropy of polymer chains, which makes their adsorption on catalysts unfavorable and the transition state unstable. Here, we overcome this challenge by inducing the catalytic reaction inside mesoporous channels, which possess a strong confined ability to polymer chains, allowing for stabilization of the transition state. This approach involves the synthesis of p-Ru/SBA catalysts, in which Ru nanoparticles are uniformly distributed within the channels of an SBA-15 support, using a precise impregnation method. The unique design of the p-Ru/SBA catalyst has demonstrated significant improvements in catalytic performance for the conversion of polyethylene into high-value liquid fuels, particularly diesel. The catalyst achieved a high solid conversion rate of 1106 g ⋅ gRu -1  ⋅ h-1 at 230 °C. Comparatively, this catalytic activity is 4.9 times higher than that of a control catalyst, Ru/SiO2 , and 14.0 times higher than that of a commercial catalyst, Ru/C, at 240 °C. This remarkable catalytic activity opens up immense opportunities for the chemical upcycling of waste plastics.

Complementary roles for mechanical and solvent-based recycling in low-carbon, circular polypropylene

Plastic recycling presents a vexing challenge. Mechanical recycling offers substantial greenhouse gas emissions savings relative to virgin plastic production but suffers from degraded aesthetic and mechanical properties. Polypropylene, one of the most widely used and lowest-cost plastics, features methyl pendants along the polymer backbone, rendering it particularly susceptible to declining properties, performance, and aesthetics across a succession of mechanical recycles. Advanced processes, such as solvent-assisted recycling, promise near-virgin quality outputs at a greater energy and emissions footprint. Mechanical and advanced recycling are often presented as competing options, but real-world plastic waste streams are likely to require preprocessing regardless of whether they are routed to an advanced process. This study quantifies the life-cycle greenhouse gas implications of multiple recycling strategies and proposes a system in which mechanical and solvent-assisted recycling can be leveraged together to boost recycling rates and satisfy demand for a wider range of product applications. Polypropylene can be recovered from mixed-plastic bales produced at material recovery facilities and processed through mechanical recycling, with a varying fraction sent for further upgrading via solvent-assisted recycling to produce material approved for food packaging and other higher-quality applications. The resulting mechanically recycled rigid polypropylene reduces life-cycle greenhouse gas emissions by 80% relative to the same quantity of virgin material, while the upgraded higher-quality material achieves GHG savings of 30%.

Properties and Applications of Self-Healing Polymeric Materials: A Review

Self-healing polymeric materials, engineered to autonomously self-restore damages from external stimuli, are at the forefront of sustainable materials research. Their ability to maintain product quality and functionality and prolong product life plays a crucial role in mitigating the environmental burden of plastic waste. Historically, initial research on the development of self-healing materials has focused on extrinsic self-healing systems characterized by the integration of embedded healing agents. These studies have primarily focused on optimizing the release of healing agents and ensuring rapid self-healing capabilities. In contrast, recent advancements have shifted the focus towards intrinsic self-healing systems that utilize their inherent reactivity and interactions within the matrix. These systems offer the advantage of repeated self-healing over the same damaged zone, which is attributed to reversible chemical reactions and supramolecular interactions. This review offers a comprehensive perspective on extrinsic and intrinsic self-healing approaches and elucidates their unique properties and characteristics. Furthermore, various self-healing mechanisms are surveyed, and insights from cutting-edge studies are integrated.

Hydrodeoxygenation of Oxygen-Containing Aromatic Plastic Wastes to Liquid Organic Hydrogen Carriers

To address the global plastic pollution issues and the challenges of hydrogen storage and transportation, we report a system, based on the hydrodeoxygenation (HDO) of oxygen-containing aromatic plastic wastes, from which organic hydrogen carriers (LOHCs) can be derived. We developed a catalytic system comprised of Ru-ReOx /SiO2 +HZSM-5 for direct HDO of polycarbonate (PC), polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyphenylene oxide (PPO), and their mixtures, to cycloalkanes as LOHCs, with high yields up to 99 %, under mild reaction conditions. The theoretical hydrogen storage capacity reaches ca. 5.74 wt%. The reaction pathway involves depolymerization of PC into C15 aromatics and C15 monophenols by direct hydrogenolysis of the C-O bond between the benzene ring and ester group, and subsequent parallel hydrogenation of C15 aromatics and HDO of C15 monophenols. HDO of cyclic alcohol is the rate-determining step. The active site is Ru metallic nanoparticles with partially covered ReOx species. The excellent performance is attributed to the synergetic effect of oxophilic ReOx species and Ru metallic sites for C-O hydrogenolysis and hydrogenation, and the promotion effect of HZSM-5 for dehydration of cyclic alcohol. The highly efficient and stable dehydrogenation of cycloalkanes over Pt/γ-Al2 O3 confirms that HDO products can act as LOHCs.

Reducing plastic pollution caused by demersal fisheries

Marine microplastics generated by wear and tear of bottom trawls and demersal seines during their service life is a growing environmental concern that requires immediate attention. In Norway, these fishing gears account for more than 70 % of the landings of demersal fish species, but they are also the leading sources of microplastics generated by fisheries. Because these two fishing gears are widely used around the world, replacing fossil-based non-degradable plastics with more abrasion-resistant materials, including biodegradable polymers, should contribute to the reduction of marine litter and its associated environmental impacts. However, the lack of available recycling techniques and the need for separate collection of biodegradable polymers means that these materials will most likely be incinerated for energy recovery, which is not favourable from a circular economy perspective. Nonetheless, from an environmental perspective the use of such biodegradable polymers in demersal fisheries could still be a better alternative to standard polymer materials.

Plastics today: Key challenges and EU strategies towards carbon neutrality: A review

Never as today the need for collaborative interactions between industry, the scientific community, NGOs, policy makers and citizens has become crucial for the development of shared political choices and protection of the environment, for the safeguard of future generations. The complex socio-economic and environmental interconnections that underlie the EU strategy of the last years, within the framework of the Agenda 2030 and the green deal, often create perplexity and confusion that make difficult to outline the definition of a common path to achieve carbon neutrality and "net zero emissions" by 2050. Scope of this work is to give a general overview of EU policies, directives, regulations, and laws concerning polymers and plastic manufacturing, aiming to reduce plastic pollution, allowing for a better understanding of the implications that environmental concern and protection may generate from a social-economical point of view.

Diapers to Thickeners and Pressure-Sensitive Adhesives: Recycling of Superabsorbers via UV Degradation

Superabsorbers based on crosslinked sodium polyacrylate polymers cannot be easily recycled, resulting in 2 million tons of superabsorbers being landfilled or burned every year. A fast and efficient strategy to recycle superabsorbers would significantly alleviate environmental pollution and promote a sustainable use of these polymers. Herein, the rapid recycling of crosslinked sodium polyacrylate hydrogels based on their inherent UV degradation is demonstrated without the need for chemicals besides water. A quantitative conversion of crosslinked sodium polyacrylate into soluble sodium polyacrylate is achieved in minutes, almost 200 times faster than a previous approach based on de-esterification. The obtained soluble sodium polyacrylate can be used, for example, as a thickener for aqueous dyes or can be esterified with n-butanol or 2-ethylhexanol to serve as a pressure-sensitive adhesive. The UV photodegradation and esterification of superabsorbers is fast, scalable, safe, and economical and yields polymers with controllable molecular weight in the range of 100-400 kg/mol. It thus offers distinct advantages over the chemical de-crosslinking strategies presented previously.

Green composites based on thermoplastic starch reinforced with micro- and nano-cellulose by melt blending - A review

Starch is a biodegradable biopolymer, a sustainable material that can replace conventional petrochemical-based plastics. However, starch has some limitations, as it must be processed by heating and treated mechanically with a plasticizer to become thermoplastic starch (TPS). Different variables such as mixing speeds, amount, and kind of plasticizers play a vital role in preparing TPS by melting. Despite this, the properties of the TPS are not comparable with those of traditional plastics. To overcome this limitation, microcellulose or nanocellulose is added to TPS by melt mixing, including the extrusion and internal mixing process, which enables large-scale production. This review aims to compile several studies that evaluate the effect of plasticizers, as well as the relevance of incorporating different cellulosic fillers of different dimensions on the properties of TPS obtained by melt mixing. Potential applications of these materials in food packaging, biomedical applications, and other opportunities are also described.

Ionic-Liquid-Mediated Deconstruction of Polymers for Advanced Recycling and Upcycling

Ionic liquids (ILs) are a promising medium to assist in the advanced (chemical and biological) recycling of polymers, owing to their tunable catalytic activity, tailorable chemical functionality, low vapor pressures, and thermal stability. These unique physicochemical properties, combined with ILs' capacity to solubilize plastics waste and biopolymers, offer routes to deconstruct polymers at reduced temperatures (and lower energy inputs) versus conventional bulk and solvent-based methods, while also minimizing unwanted side reactions. In this Viewpoint, we discuss the use of ILs as catalysts and mediators in advanced recycling, with an emphasis on chemical recycling, by examining the interplay between IL chemistry and deconstruction thermodynamics, deconstruction kinetics, IL recovery, and product recovery. We also consider several potential environmental benefits and concerns associated with employing ILs for advanced recycling over bulk- or solvent-mediated deconstruction techniques, such as reduced chemical escape by volatilization, decreased energy demands, toxicity, and environmental persistence. By analyzing IL-mediated polymer deconstruction across a breadth of macromolecular systems, we identify recent innovations, current challenges, and future opportunities in IL application toward circular polymer economies.

A critical review and future perspective of plastic waste recycling

Plastic waste is increasing rapidly due to urbanisation and globalization. In recent decades, plastic usage increased, and the upward trend is expected to continue. Only 9% of the 7 billion tonnes of plastic produced were recycled in India until 2022. India generates 1.5 million tonnes of plastic waste (PW) every year and ranks among top ten plastic producer countries. Large amount of waste plastics could harm environment and human health. The current manuscript provides a comprehensive approach for mechanical and chemical recycling methods. The technical facets of mechanical recycling relating to collection, sorting, grading, and general management to create plastic products with additional value have been elaborated in this study. Another sustainable methods aligned with the chemical recycling using pyrolysis, gasification, hydrocracking, IH2 (Integrated Hydropyrolysis 2), and KDV (Katalytische Drucklose Verolung) techniques have also been highlighted with the critical process parameters for the sustainable conversion of plastic waste to valuable products. The review also adheres to less carbon-intensive plastic degrading strategies that take a biomimetic approach using the microorganism based biodegradation. The informative aspects covering the limitations and effectiveness of all PW technologies and its applications towards plastic waste management (PWM) are also emphasized. The existing practices in PW policy guidelines along with its economic and ecological aspects have also been discussed.

Degradation of plastic wastes to commercial chemicals and monomers under visible light

Plastics are playing an incrementally extensive and irreplaceable role in human life, but with alarming cyclic unsustainability. Numerous attempts have been undertaken to recycle plastics, among which chemical recycling from waste plastics back to chemicals and monomers has attracted great attention. Herein, the depolymerization of nine types of plastics to commercial chemicals and monomers was achieved under ambient conditions via synergetic integrated uranyl-photocatalysis, which contains a process for converting five kinds of mixed plastics into a value-added product. The degradation processes were depicted in terms of variation in scanning electron microscopy imaging, distinction in the X-ray diffraction pattern, alteration in water contact angle, and dynamic in molecular weight distribution. Single electron transfer, hydrogen atom transfer, and oxygen atom transfer were synergistically involved in uranyl-photocatalysis, which were substantiated by mechanistic studies. Relying on flow system design, the chemical recycling of plastics was feasible for kilogram-scale degradation of post-consumer-waste polyethylene terephthalate bottles to commercial chemicals, displaying a promising practical application potential in the future.

Photovoltaic-driven electrocatalytic upcycling poly(ethylene terephthalate) plastic waste coupled with hydrogen generation

The electrochemical upconversion of plastic wastes has been demonstrated as an attractive alternative to the sluggish OER process to simultaneously produce valued chemicals and reduce the energy consumption. Herein, we report a photovoltaic-driven electrocatalytic strategy to upcycle poly(ethylene terephthalate) (PET) into value-added formic acid products and co-produce green hydrogen. The waste PET was dissolved by KOH and then directly pumped into an electrochemical flow reactor (EFR) including CuO nanowires (NWs) anode and Pt/C 20% cathode (PV-EFR) and driven by the commercial silicon photovoltaic (PV) panels. This PV-EFR system exhibits a solar-to-chemical (STC) efficiency of 32.6% under AM 1.5 G simulated sunlight (100 mW cm^-2), and high Faradaic efficiencies (FE, ∼ 67% for formic acid, and ∼90% for green hydrogen) with exceptional 120 h long-term stability in the STC mode. Such a photovoltaic-driven electrocatalytic strategy exhibits great potential for the rational utilization of renewable energy sources to produce high-value chemicals and fuels by upconversion of waste plastics.

Chemical recycling technologies for PVC waste and PVC-containing plastic waste: A review

The extensive production and consumption of plastics has resulted in significant plastic waste and plastic pollution. Polyvinyl chloride (PVC) waste has a high chlorine content and is the primary source of chlorine in the plastic waste stream, potentially generating hazardous chlorinated organic pollutants if treated improperly. This review discusses PVC synthesis, applications, and the current types and challenges of PVC waste management. Dechlorination is vital for the chemical recycling of PVC waste and PVC-containing plastic waste. We review dehydrochlorination and dechlorination mechanisms of PVC using thermal degradation and wet treatments, and summarize the recent progress in chemical treatments and dechlorination principles. This review provides readers with a comprehensive analysis of chemical recycling technologies for PVC waste and PVC-containing plastic waste to transform them into chemicals, fuels, feedstock, and value-added polymers.

PET Waste Recycling into BTX Fraction Using In Situ Obtained Nickel Phosphide

The annual production of plastic waste is a serious ecological problem as it causes substantial pollution of the environment. Polyethylene terephthalate, a material usually found in disposable plastic bottles, is one of the most popular material used for packaging in the world. In this paper, it is proposed to recycle polyethylene terephthalate waste bottles into benzene-toluene-xylene fraction using a heterogeneous nickel phosphide catalyst formed in situ during the polyethylene terephthalate recycling process. The catalyst obtained was characterized using powder X-ray diffraction, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy techniques. The catalyst was shown to contain a Ni₂P phase. Its activity was studied in a temperature range of 250-400 °C and a H₂ pressure range of 5-9 MPa. The highest selectivity for benzene-toluene-xylene fraction was 93% at quantitative conversion.

Machine Learning Predictions of Oil Yields Obtained by Plastic Pyrolysis and Application to Thermodynamic Analysis

Chemical recycling via thermal processes such as pyrolysis is a potentially viable way to convert mixed streams of waste plastics into usable fuels and chemicals. Unfortunately, experimentally measuring product yields for real waste streams can be time- and cost-prohibitive, and the yields are very sensitive to feed composition, especially for certain types of plastics like poly(ethylene terephthalate) (PET) and polyvinyl chloride (PVC). Models capable of predicting yields and conversion from feed composition and reaction conditions have potential as tools to prioritize resources to the most promising plastic streams and to evaluate potential preseparation strategies to improve yields. In this study, a data set consisting of 325 data points for pyrolysis of plastic feeds was collected from the open literature. The data set was divided into training and test sub data sets; the training data were used to optimize the seven different machine learning regression methods, and the testing data were used to evaluate the accuracy of the resulting models. Of the seven types of models, eXtreme Gradient Boosting (XGBoost) predicted the oil yield of the test set with the highest accuracy, corresponding to a mean absolute error (MAE) value of 9.1%. The optimized XGBoost model was then used to predict the oil yields from real waste compositions found in Municipal Recycling Facilities (MRFs) and the Rhine River. The dependence of oil yields on composition was evaluated, and strategies for removing PET and PVC were assessed as examples of how to use the model. Thermodynamic analysis of a pyrolysis system capable of achieving oil yields predicted using the machine-learned model showed that pyrolysis of Rhine River plastics should be net exergy producing under most reasonable conditions.

Review of polymer technologies for improving the recycling and upcycling efficiency of plastic waste

Human society has become increasingly reliant on plastic because it allows for convenient and sanitary living. However, recycling rates are currently low, which means that the majority of plastic waste ends up in landfills or the ocean. Increasing recycling and upcycling rates is a critical strategy for addressing the issues caused by plastic pollution, but there are several technical limitations to overcome. This article reviews advancements in polymer technology that aim to improve the efficiency of recycling and upcycling plastic waste. In food packaging, natural polymers with excellent gas barrier properties and self-cleaning abilities have been introduced as environmentally friendly alternatives to existing materials and to reduce food-derived contamination. Upcycling and valorization approaches have emerged to transform plastic waste into high-value-added products. Recent advancements in the development of recyclable high-performance plastics include the design of super engineering thermoplastics and engineering chemical bonds of thermosets to make them recyclable and biodegradable. Further research is needed to develop more cost-effective and scalable technologies to address the plastic pollution problem through sustainable recycling and upcycling.