Wearable Electronics Based on 2D Materials for Human Physiological Information Detection

Ultraconformal Skin-Interfaced Sensing Platform for Motion Artifact-Free Monitoring

Capable of directly capturing various physiological signals from human skin, skin-interfaced bioelectronics has emerged as a promising option for human health monitoring. However, the accuracy and reliability of the measured signals can be greatly affected by body movements or skin deformations (e.g., stretching, wrinkling, and compression). This study presents an ultraconformal, motion artifact-free, and multifunctional skin bioelectronic sensing platform fabricated by a simple and user-friendly laser patterning approach for sensing high-quality human physiological data. The highly conductive membrane based on the room-temperature coalesced Ag/Cu@Cu core-shell nanoparticles in a mixed solution of polymers can partially dissolve and locally deform in the presence of water to form conformal contact with the skin. The resulting sensors to capture improved electrophysiological signals upon various skin deformations and other biophysical signals provide an effective means to monitor health conditions and create human-machine interfaces. The highly conductive and stretchable membrane can also be used as interconnects to connect commercial off-the-shelf chips to allow extended functionalities, and the proof-of-concept demonstration is highlighted in an integrated pulse oximeter. The easy-to-remove feature of the resulting device with water further allows the device to be applied on delicate skin, such as the infant and elderly.

Recent Advances in Two-Dimensional Nanomaterials for Healthcare Monitoring

The development of advanced technologies for the fabrication of functional nanomaterials, nanostructures, and devices has facilitated the development of biosensors for analyses. Two-dimensional (2D) nanomaterials, with unique hierarchical structures, a high surface area, and the ability to be functionalized for target detection at the surface, exhibit high potential for biosensing applications. The electronic properties, mechanical flexibility, and optical, electrochemical, and physical properties of 2D nanomaterials can be easily modulated, enabling the construction of biosensing platforms for the detection of various analytes with targeted recognition, sensitivity, and selectivity. This review provides an overview of the recent advances in 2D nanomaterials and nanostructures used for biosensor and wearable-sensor development for healthcare and health-monitoring applications. Finally, the advantages of 2D-nanomaterial-based devices and several challenges in their optimal operation have been discussed to facilitate the development of smart high-performance biosensors in the future.

Monolithic 3D integration of 2D materials-based electronics towards ultimate edge computing solutions

Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.

Biomass-derived 2D carbon materials: structure, fabrication, and application in electrochemical sensors

Biomass, a renewable hydrocarbon, is one of the favorable sources of advanced carbon materials owing to its abundant resources and diverse molecular structures. Biomass-based two-dimensional carbon nanomaterials (2D-BC) have attracted extensive attention due to their tunable structures and properties, and have been widely used in the design and fabrication of electrochemical sensing platforms. This review embarks on the thermal conversion process of biomass from different sources and the synthesis strategy of 2D-BC materials. The affinity between 2D-BC structure and properties is emphasized. The recent progress in 2D-BC-based electrochemical sensors for health and environmental monitoring is also presented. Finally, the challenges and future development directions related to such materials are proposed in order to promote their further application in the field of electrochemical sensing.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Pattern design of a liquid metal-based wearable heater for constant heat generation under biaxial strain

As the wearable heater is increasingly popular due to its versatile applications, there is a growing need to improve the tensile stability of the wearable heater. However, maintaining the stability and precise control of heating in resistive heaters for wearable electronics remains challenging due to multiaxial dynamic deformation with human motion. Here, we propose a pattern study for a circuit control system without complex structure or deep learning of the liquid metal (LM)-based wearable heater. The LM direct ink writing (DIW) method was used to fabricate the wearable heaters in various designs. Through the study about the pattern, the significance of input power per unit area for steady average temperature with tension was proven, and the directionality of the pattern was shown to be a factor that makes feedback control difficult due to the difference in resistance change according to strain direction. For this issue, a wearable heater with the same minimal resistance change regardless of the tension direction was developed using Peano curves and sinuous pattern structure. Lastly, by attaching to a human body model, the wearable heater with the circuit control system shows stable heating (52.64°C, with a standard deviation of 0.91°C) in actual motion.

Thermoelectric properties of X3N2O2 (X = Hf, Zr) MXene monolayers: a first-principles study

MXene monolayers have received increasing attention due to their unique properties, particularly their high conductivity, which shows great potential in thermoelectric materials. In this paper, we present a theoretical study of the thermoelectric properties of X₃N₂O₂ (X = Hf, Zr) MXene monolayers, taking electron-phonon coupling into consideration. Owing to their similar geometrical structures, electronic band structures, and phonon dispersions, X₃N₂O₂ MXene monolayers exhibit homogeneous electron and phonon transport properties. The conduction band shows multi-valley characteristics which leads to better n-type electron transport properties than p-type ones. The maximum values of the n-type power factor can reach 32 μW cm^-1 K^-2 for the Hf₃N₂O₂ monolayer and 23 μW cm^-1 K^-2 for the Zr₃N₂O₂ monolayer. In terms of phonon transport, the lattice thermal conductivity for the Zr₃N₂O₂ monolayer is higher than that for the Hf₃N₂O₂ monolayer, due to larger phonon group velocity. Our results show that the Hf₃N₂O₂ monolayer is more suitable for thermoelectric materials than the Zr₃N₂O₂ monolayer, with optimal n-type thermoelectric figure of merit (ZT) values of 0.36 and 0.15 at 700 K, respectively. These findings may be useful for the development of wearable thermoelectric devices and sensor applications based on X₃N₂O₂ MXene monolayers.

Wearable sensors for telehealth based on emerging materials and nanoarchitectonics

Wearable sensors have made significant progress in sensing physiological and biochemical markers for telehealth. By monitoring vital signs like body temperature, arterial oxygen saturation, and breath rate, wearable sensors provide enormous potential for the early detection of diseases. In recent years, significant advancements have been achieved in the development of wearable sensors based on two-dimensional (2D) materials with flexibility, excellent mechanical stability, high sensitivity, and accuracy introducing a new approach to remote and real-time health monitoring. In this review, we outline 2D materials-based wearable sensors and biosensors for a remote health monitoring system. The review focused on five types of wearable sensors, which were classified according to their sensing mechanism, such as pressure, strain, electrochemical, optoelectronic, and temperature sensors. 2D material capabilities and their impact on the performance and operation of the wearable sensor are outlined. The fundamental sensing principles and mechanism of wearable sensors, as well as their applications are explored. This review concludes by discussing the remaining obstacles and future opportunities for this emerging telehealth field. We hope that this report will be useful to individuals who want to design new wearable sensors based on 2D materials and it will generate new ideas.

Review on two-dimensional material-based field-effect transistor biosensors: accomplishments, mechanisms, and perspectives

Field-effect transistor (FET) is regarded as the most promising candidate for the next-generation biosensor, benefiting from the advantages of label-free, easy operation, low cost, easy integration, and direct detection of biomarkers in liquid environments. With the burgeoning advances in nanotechnology and biotechnology, researchers are trying to improve the sensitivity of FET biosensors and broaden their application scenarios from multiple strategies. In order to enable researchers to understand and apply FET biosensors deeply, focusing on the multidisciplinary technical details, the iteration and evolution of FET biosensors are reviewed from exploring the sensing mechanism in detecting biomolecules (research direction 1), the response signal type (research direction 2), the sensing performance optimization (research direction 3), and the integration strategy (research direction 4). Aiming at each research direction, forward perspectives and dialectical evaluations are summarized to enlighten rewarding investigations.

A New, Thorough Look on Unusual and Neglected Group III-VI Compounds Toward Novel Perusals

The attention on group III-VI compounds in the last decades has been centered on the optoelectronic properties of indium and gallium chalcogenides. These outstanding properties are leading to novel advancements in terms of fundamental and applied science. One of the advantages of these compounds is to present laminated structures, which can be exfoliated down to monolayers. Despite the large knowledge gathered toward indium and gallium chalcogenides, the family of the group III-VI compounds embraces several other noncommon compounds formed by the other group III elements. These compounds present various crystal lattices, among which a great deal is offered from layered structures. Studies on aluminium chalcogenides show interesting potential as anodes in batteries and as semiconductors. Thallium (Tl), which is commonly present in the +1 oxidation state, is one of the key components in ternary chalcogenides. However, binary Tl-Q (Q = S, Se, Te) systems and derived films are still studied for their semiconducting and thermoelectric properties. This review aims to summarize the biggest features of these unusual materials and to shed some new light on them with the perspective that in the future, novel studies can revive these compounds in order to give rise to a new generation of technology.

Defect Healing in Graphene via Rapid Thermal Annealing with Polymeric "Nanobandage"

Overcoming throughput challenges in current graphene defect healing processes, such as conventional thermal annealing, is crucial for realizing post-silicon device fabrication. Herein, a new time- and energy-efficient method for defect healing in graphene is reported, utilizing polymer-assisted rapid thermal annealing (RTA). In this method, a nitrogen-rich, polymeric "nanobandage" is coated directly onto graphene and processed via RTA at 800 °C for 15 s. During this process, the polymer matrix is cleanly degraded, while nitrogen released from the nanobandage can diffuse into graphene, forming nitrogen-doped healed graphene. To study the influence of pre-existing defects on graphene healing, lattice defects are purposefully introduced via electron beam irradiation and investigated by Raman microscopy. X-ray photoelectron spectroscopy reveals successful healing of graphene, observing a maximum doping level of 3 atomic nitrogen % in nanobandage-treated samples from a baseline of 0-1 atomic % in non-nanobandage treated samples. Electrical transport measurements further indicate that the nanobandage treatment recovers the conductivity of scanning electron microscope-treated defective graphene at ≈85%. The reported polymer-assisted RTA defect healing method shows promise for healing other 2D materials with other dopants by simply changing the chemistry of the polymeric nanobandage.

Wearable chemical sensors based on 2D materials for healthcare applications

Chemical sensors worn on the body could make possible the continuous, noninvasive, and accurate monitoring of vital human signals, which is necessary for remote health monitoring and telemedicine. Attractive for creating high-performance, wearable chemical sensors are atomically thin materials with intriguing physical features, abundant chemistry, and high surface-to-volume ratios. These advantages allow for appropriate material-analyte interactions, resulting in a high level of sensitivity even at trace analyte concentrations. Previous review articles covered the material and device elements of 2D material-based wearable devices extensively. In contrast, little research has addressed the existing state, future outlook, and promise of 2D materials for wearable chemical sensors. We provide an overview of recent advances in 2D-material-based wearable chemical sensors to overcome this deficiency. The structure design, manufacturing techniques, and mechanisms of 2D material-based wearable chemical sensors will be evaluated, as well as their applicability in human health monitoring. Importantly, we present a thorough review of the current state of the art and the technological gaps that would enable the future design and nanomanufacturing of 2D materials and wearable chemical sensors. Finally, we explore the challenges and opportunities associated with designing and implementing 2D wearable chemical sensors.

Large-Scale Ultra-Robust MoS2 Patterns Directly Synthesized on Polymer Substrate for Flexible Sensing Electronics

Synthesis of large-area patterned MoS₂ is considered the principle base for realizing high-performance MoS₂ -based flexible electronic devices. Patterning and transferring MoS₂ films to target flexible substrates, however, require conventional multi-step photolithography patterning and transferring process, despite tremendous progress in the facilitation of practical applications. Herein, an approach to directly synthesize large-scale MoS₂ patterns that combines inkjet printing and thermal annealing is reported. An optimal precursor ink is prepared that can deposit arbitrary patterns on polyimide films. By introducing a gas atmosphere of argon/hydrogen (Ar/H₂ ), thermal treatment at 350 °C enables an in situ decomposition and crystallization in the patterned precursors and, consequently, results in the formation of MoS₂ . Without complicated processes, patterned MoS₂ is obtained directly on polymer substrate, exhibiting superior mechanical flexibility and durability (≈2% variation in resistance over 10,000 bending cycles), as well as excellent chemical stability, which is attributed to the generated continuous and thin microstructures, as well as their strong adhesion with the substrate. As a step further, this approach is employed to manufacture various flexible sensing devices that are insensitive to body motions and moisture, including temperature sensors and biopotential sensing systems for real-time, continuously monitoring skin temperature, electrocardiography, and electromyography signals.

2D-materials-integrated optoelectromechanics: recent progress and future perspectives

The discovery of two-dimensional (2D) materials has gained worldwide attention owing to their extraordinary optical, electrical, and mechanical properties. Due to their atomic layer thicknesses, the emerging 2D materials have great advantages of enhanced interaction strength, broad operating bandwidth, and ultralow power consumption for optoelectromechanical coupling. The van der Waals (vdW) epitaxy or multidimensional integration of 2D material family provides a promising platform for on-chip advanced nano-optoelectromechanical systems (NOEMS). Here, we provide a comprehensive review on the nanomechanical properties of 2D materials and the recent advances of 2D-materials-integrated nano-electromechanical systems and nano-optomechanical systems. By utilizing active nanophotonics and optoelectronics as the interface, 2D active NOEMS and their coupling effects are particularly highlighted at the 2D atomic scale. Finally, we share our viewpoints on the future perspectives and key challenges of scalable 2D-materials-integrated active NOEMS for on-chip miniaturized, lightweight, and multifunctional integration applications.

Semiconductor Plasmon Enhanced Upconversion toward a Flexible Temperature Sensor

Noninvasive and sensitive thermometry is crucial to human health monitoring and applications in disease diagnosis. Despite recent advances in optical temperature detection, the construction of sensitive wearable temperature sensors remains a considerable challenge. Here, a flexible and biocompatible optical temperature sensor is developed by combining plasmonic semiconductor W₁₈O₄₉ enhanced upconversion emission (UCNPs/WO) with flexible poly(lactic acid) (PLA)-based optical fibers. The UCNPs/WO offers highly thermal-sensitive and obviously enhanced dual-wavelength emissions for ratiometric temperature sensing. The PLA polymer endows the sensor with excellent light-transmitting ability for laser excitation and emission collection and high biocompatibility. The fabricated UCNPs/WO-PLA sensor exhibits stable and rapid temperature response in the range 298-368 K, with a high relative sensitivity of 1.53% K^-1 and detection limit as low as ±0.4 K. More importantly, this proposed sensor is demonstrated to possess dual function on real-time detection for physiological thermal changes and heat release, exhibiting great potential in wearable health monitoring and biotherapy applications.

Application of Two-Dimensional Materials towards CMOS-Integrated Gas Sensors

During the last few decades, the microelectronics industry has actively been investigating the potential for the functional integration of semiconductor-based devices beyond digital logic and memory, which includes RF and analog circuits, biochips, and sensors, on the same chip. In the case of gas sensor integration, it is necessary that future devices can be manufactured using a fabrication technology which is also compatible with the processes applied to digital logic transistors. This will likely involve adopting the mature complementary metal oxide semiconductor (CMOS) fabrication technique or a technique which is compatible with CMOS due to the inherent low costs, scalability, and potential for mass production that this technology provides. While chemiresistive semiconductor metal oxide (SMO) gas sensors have been the principal semiconductor-based gas sensor technology investigated in the past, resulting in their eventual commercialization, they need high-temperature operation to provide sufficient energies for the surface chemical reactions essential for the molecular detection of gases in the ambient. Therefore, the integration of a microheater in a MEMS structure is a requirement, which can be quite complex. This is, therefore, undesirable and room temperature, or at least near-room temperature, solutions are readily being investigated and sought after. Room-temperature SMO operation has been achieved using UV illumination, but this further complicates CMOS integration. Recent studies suggest that two-dimensional (2D) materials may offer a solution to this problem since they have a high likelihood for integration with sophisticated CMOS fabrication while also providing a high sensitivity towards a plethora of gases of interest, even at room temperature. This review discusses many types of promising 2D materials which show high potential for integration as channel materials for digital logic field effect transistors (FETs) as well as chemiresistive and FET-based sensing films, due to the presence of a sufficiently wide band gap. This excludes graphene from this review, while recent achievements in gas sensing with graphene oxide, reduced graphene oxide, transition metal dichalcogenides (TMDs), phosphorene, and MXenes are examined.

Understanding the Origin of Tensile Response in a Graphene Textile Strain Sensor with Negative Differential Resistance

The flexible strain sensors based on the textile substrate have natural flexibility, high sensitivity, and wide-range tensile response. However, the textile's complex and anisotropic substructure leads to a negative differential resistance (NDR) response, lacking a deeper understanding of the mechanism. Therefore, we examined a graphene textile strain sensor with a conspicuous NDR tensile response, providing a requisite research platform for mechanism investigation. The pioneering measurement of single fiber bundles confirmed the existence of the NDR effect on the subgeometry scale. Based on the in situ characterization of tensile morphology and measurement, we conducted quantitative behavior analyses to reveal the origin of tensile electrical responses in the full range comprehensively. The results showed that the dominant factor in generating the NDR effect is the relative displacement of fibers within the textile bundles. Based on the neural spiking-like tensile response, we further demonstrated the application potential of the textile strain sensor in threshold detection and near-sensor signal processing. The proposed NDR behavior model would provide a reference for the design and application of wearable intelligent textiles.

In Situ Measurements of Strain Evolution in Graphene/Boron Nitride Heterostructures Using a Non-Destructive Raman Spectroscopy Approach

The mechanical properties of engineered van der Waals (vdW) 2D materials and heterostructures are critically important for their implementation into practical applications. Using a non-destructive Raman spectroscopy approach, this study investigates the strain evolution of single-layer graphene (SLGr) and few-layered boron nitride/graphene (FLBN/SLGr) heterostructures. The prepared 2D materials are synthesized via chemical vapor deposition (CVD) method and then transferred onto flexible polyethylene terephthalate (PET) substrates for subsequent strain measurements. For this study, a custom-built mechanical device-jig is designed and manufactured in-house to be used as an insert for the 3D piezoelectric stage of the Raman system. In situ investigation of the effects of applied strain in graphene detectable via Raman spectral data in characteristic bonds within SLGr and FLBN/SLGr heterostructures is carried out. The in situ strain evolution of the FLBN/SLGr heterostructures is obtained in the range of (0-0.5%) strain. It is found that, under the same strain, SLG exhibits a higher Raman shift in the 2D band as compared with FLBN/SLGr heterostructures. This research leads to a better understanding of strain dissipation in vertical 2D heterostacks, which could help improve the design and engineering of custom interfaces and, subsequently, control lattice structure and electronic properties. Moreover, this study can provide a new systematic approach for precise in situ strain assessment and measurements of other CVD-grown 2D materials and their heterostructures on a large scale for manufacturing a variety of future micro- and nano-scale devices on flexible substrates.

Nano-engineering and nano-manufacturing in 2D materials: marvels of nanotechnology

Two-dimensional materials have attracted significant interest and investigation since the marvellous discovery of graphene. Due to their unique physical, mechanical and optical properties, van der Waals (vdW) materials possess extraordinary potential for application in future optoelectronics devices. Nano-engineering and nano-manufacturing in the atomically thin regime has further opened multifarious avenues to explore novel physical properties. Among them, moiré heterostructures, strain engineering and substrate manipulation have created numerous exotic and topological phenomena such as unconventional superconductivity, orbital magnetism, flexible nanoelectronics and highly efficient photovoltaics. This review comprehensively summarizes the three most influential techniques of nano-engineering in 2D materials. The latest development in the marvels of moiré structures in vdW materials is discussed; in addition, topological structures in layered materials and substrate engineering on the nanoscale are thoroughly scrutinized to highlight their significance in micro- and nano-devices. Finally, we conclude with remarks on challenges and possible future directions in the rapidly expanding field of nanotechnology and nanomaterial.

Energy Harvesting Using Cotton Fabric Embedded with 2D Hexagonal Boron Nitride

Continuous health monitoring through sensitive physiological signals (using a wearable device) is crucial for the early detection of heart diseases and breathing problems. Here, we have developed a flexible hBN/cotton hybrid device that can detect minor signals such as heartbeat and breathed-out air pressure. Systematic observation of the real-time motion sensing showed a peak-to-peak voltage output of ∼1.5 V for each heart rate pulse. The as-fabricated device showed a high voltage output of up to ∼10 V upon applying a pressure of ∼3 MPa. The FTIR results and DFT calculation suggested a chemical interaction between hBN and cellulose, giving rise to flat band characteristics and partially filled σ-bonding (sp²) hybridization. The atomic-scale chemical interface between atomically thin hBN and surface functional groups present on cotton resulted in charge localization and enhanced output voltage. An hBN/cotton hybrid device can bring new insights and opportunities to develop a self-charging and health-monitoring energy-harvesting cloth.

Recent progress in electrospun nanomaterials for wearables

Wearables have garnered significant attention in recent years not only as consumer electronics for entertainment, communications, and commerce but also for real-time continuous health monitoring. This has been spurred by advances in flexible sensors, transistors, energy storage, and harvesting devices to replace the traditional, bulky, and rigid electronic devices. However, engineering smart wearables that can seamlessly integrate with the human body is a daunting task. Some of the key material attributes that are challenging to meet are skin conformability, breathability, and biocompatibility while providing tunability of its mechanical, electrical, and chemical properties. Electrospinning has emerged as a versatile platform that can potentially address these challenges by fabricating nanofibers with tunable properties from a polymer base. In this article, we review advances in wearable electronic devices and systems that are developed using electrospinning. We cover various applications in multiple fields including healthcare, biomedicine, and energy. We review the ability to tune the electrical, physiochemical, and mechanical properties of the nanofibers underlying these applications and illustrate strategies that enable integration of these nanofibers with human skin.

Mass-Producible 2D Nanocomposite-Based Temperature-Independent All-Printed Relative Humidity Sensor

Relative humidity sensors are widely studied under the categories of both environmental and biosensors owing to their vast reaching applications. The research on humidity sensors is mainly divided into two concentration areas including novel material development and novel device structure. Another approach focuses on the development of printed sensors with performance comparable to the sensors fabricated via conventional techniques. The major challenges in the research on relative humidity sensors include the range of detection, sensitivity (especially at lower %RH), transient response time, and dependence on temperature. Temperature dependence is one of the least studied parameters in relative humidity sensor development. In this work, relative humidity sensors were fabricated using all-printed approaches that are also compatible with mass production, resulting in low cost and easy development. Laser-induced graphene (LIG)-based printed electrodes were used as the transducers, while the 2D MoS₂ and graphene nanocomposite was used as the active layer material with the built-in property of temperature independence. The exfoliation process of 2D MoS₂ was based on wet grinding, while graphene for the active layer was obtained by scratching the graphene grown on the polyimide (PI) surface via laser ablation. The resulting sensors showed an excellent output response for a full range of 0%RH to 100%RH, having no dependence on the surrounding temperature, and excellent response and recovery times of 4 and 2 s, respectively. The developed sensors can be confidently employed for a wide range of humidity sensing applications where the temperature of the surrounding environment is not constant.

Bi2O2Se-Based True Random Number Generator for Security Applications

The fast development of the Internet of things (IoT) promises to deliver convenience to human life. However, a huge amount of the data is constantly generated, transmitted, processed, and stored, posing significant security challenges. The currently available security protocols and encryption techniques are mostly based on software algorithms and pseudorandom number generators that are vulnerable to attacks. A true random number generator (TRNG) based on devices using stochastically physical phenomena has been proposed for auditory data encryption and trusted communication. In the current study, a Bi₂O₂Se-based memristive TRNG is demonstrated for security applications. Compared with traditional metal-insulator-metal based memristors, or other two-dimensional material-based memristors, the Bi₂O₂Se layer as electrode with non-van der Waals interface, high carrier mobility, air stability, extreme low thermal conductivity, as well as vertical surface resistive switching shows intrinsic stochasticity and complexity in a memristive true analogue/digital random number generation. Moreover, those analogue/digital random number generation processes are proved to be resilient for machine learning prediction.

A Fully Integrated Flexible Tunable Chemical Sensor Based on Gold-Modified Indium Selenide Nanosheets

In this work, a novel light-modulated bifunctional gas sensor based on Au nanoparticles-modified 2D InSe nanosheets was demonstrated. The prepared sensor displayed a reversible and extremely high response for recognition of nitrogen dioxide (NO₂) under visible-light illumination. The sensitivity (1192%) was about 10 times higher than that under dark condition, and the limit of detection (LOD) was 0.17 ppb. In contrast, when sensing ammonia (NH₃), higher sensitivity and selectivity were obtained in darkness rather than in light, with sensitivity and LOD of 11% and 0.2 ppm. Furthermore, the sensor possesses decent stability, repeatability, and anti-interference ability. The tunable sensing behavior with light modulation has been clearly studied with the help of density functional theory. A new principle called "carrier storage box" of Au nanoparticles was proposed to explain the change in surface state of InSe under light modulation. Finally, the prepared sensor has been successfully applied to construct a fully integrated wearable device to measure NH₃ and NO₂ in ambient environment. In all, this work provides a highly competitive gas detection method and paves the way for designing 2D materials-based optoelectronic devices with tunable and multifunctional features.

Multidimensional Imaging Reveals Mechanisms Controlling Multimodal Label-Free Biosensing in Vertical 2DM-Heterostructures

Two-dimensional materials and their van der Waals heterostructures enable a large range of applications, including label-free biosensing. Lattice mismatch and work function difference in the heterostructure material result in strain and charge transfer, often varying at a nanometer scale, that influence device performance. In this work, a multidimensional optical imaging technique is developed in order to map subdiffractional distributions for doping and strain and understand the role of those for modulation of the electronic properties of the material. As an example, vertical heterostructures comprised of monolayer graphene and single-layer flakes of transition metal dichalcogenide MoS₂ were fabricated and used for biosensing. Herein, the optical label-free detection of doxorubicin, a common cancer drug, is reported via three independent optical detection channels (photoluminescence shift, Raman shift, and graphene enhanced Raman scattering). Non-uniform broadening of components of multimodal signal correlates with the statistical distribution of local optical properties of the heterostructure. Multidimensional nanoscale imaging allows one to reveal the physical origin for such a local response and propose the best strategy for the mitigation of materials variability and future device fabrication, enabling multiplexed biosensing.

Mutually Noninterfering Flexible Pressure-Temperature Dual-Modal Sensors Based on Conductive Metal-Organic Framework for Electronic Skin

Pressure and temperature are two important indicators for human skin perception. Electronic skin (E-skin) that mimics human skin within one single flexible sensor is beneficial for detecting and differentiating pressure and temperature and showing immunity from tensile strain disruptions. However, few studies have simultaneously realized these conditions. Herein, a flexible and strain-suppressed pressure-temperature dual-modal sensor based on conductive and microstructured metal-organic framework (MOF) films was reported and mainly prepared by in situ growing Ni₃(HiTP)₂ onto microstructured mixed cellulose (MSMC) substrates. The sensor exhibits distinguishable and strain-suppressed properties for pressure (sensing range up to 300 kPa, sensitivity of 61.61 kPa^-1, response time of 20 ms, and ultralow detection limit of 1 Pa) and temperature sensing (sensitivity of 57.1 μV/K). Theoretical calculations successfully analyzed the mutually noninterfering mechanism between pressure and temperature. Owing to its effective perception in static and dynamic surroundings, this sensor has great potential applications, such as in electronic skin and smart prosthetics.

Smart E-Textile Systems: A Review for Healthcare Applications

E-textiles is a new hybrid field developed with the help of the integration of electronic components into our daily usage of textile products. These wearable e-textiles provide user-defined applications as well as normal textile clothing. The medical field is one of the major leading areas where these new hybrid products are being implemented, and relatively mature products can be observed in the laboratory as well as in commercial markets. These products are developed for continuous patient monitoring in large-scale hospital centers as well as for customized patient requirements. Meanwhile, these products are also being used for complex medical treatments and the replacement of conventional methods. This review manuscript contains a basic overview of e-textile systems, their components, applications, and usages in the field of medical innovations. E-textile systems, integrated into customized products for medical needs, are discussed with their proposed properties and limitations. Finally, some recommendations to enhance the e-textile system’s integration into the medical field are argued.

Multifunctional Graphene Sensor Ensemble as a Smart Biomonitoring Fashion Accessory

Biomonitoring wearable sensors based on two-dimensional nanomaterials have recently elicited keen research interest and potential for a new range of flexible nanoelectronic devices. Practical nanomaterial-based devices suited for real-world service, which exhibit first-rate performance while being an attractive accessory, are still distant. We report a multifunctional flexible wearable sensor fabricated using an ultrathin percolative layer of graphene nanosheets on laser-patterned gold circular interdigitated electrodes for monitoring vital human physiological parameters. This graphene on laser-patterned electrode (GLE) sensor displays an excellent strain resolution of 245 με (0.024%) and a record high gauge factor of 6.3 × 10⁷, with exceptional stability and repeatability in its operating range. The sensor was tested for human physiological monitoring like measurement of heart rate, breathing rate, body temperature, and hydration level, which are vital health parameters, especially considering the current pandemic scenario. The sensor also served in applications such as a pedometer, limb movement tracker, and control switch for human interaction. The innovative laser-etch process used to pattern gold thin-film electrodes, with the multifunctional incognizable graphene layer, provides a technique for integrating multiple sensors in a wearable band. The reported work marks a giant leap from the conventional banal devices to a highly marketable multifunctional sensor array as a biomonitoring fashion accessory.

A Novel Artificial Neuron-Like Gas Sensor Constructed from CuS Quantum Dots/Bi2S3 Nanosheets

Real-time rapid detection of toxic gases at room temperature is particularly important for public health and environmental monitoring. Gas sensors based on conventional bulk materials often suffer from their poor surface-sensitive sites, leading to a very low gas adsorption ability. Moreover, the charge transportation efficiency is usually inhibited by the low defect density of surface-sensitive area than that in the interior. In this work, a gas sensing structure model based on CuS quantum dots/Bi₂S₃ nanosheets (CuS QDs/Bi₂S₃ NSs) inspired by artificial neuron network is constructed. Simulation analysis by density functional calculation revealed that CuS QDs and Bi₂S₃ NSs can be used as the main adsorption sites and charge transport pathways, respectively. Thus, the high-sensitivity sensing of NO₂ can be realized by designing the artificial neuron-like sensor. The experimental results showed that the CuS QDs with a size of about 8 nm are highly adsorbable, which can enhance the NO₂ sensitivity due to the rich sensitive sites and quantum size effect. The Bi₂S₃ NSs can be used as a charge transfer network channel to achieve efficient charge collection and transmission. The neuron-like sensor that simulates biological smell shows a significantly enhanced response value (3.4), excellent responsiveness (18 s) and recovery rate (338 s), low theoretical detection limit of 78 ppb, and excellent selectivity for NO₂. Furthermore, the developed wearable device can also realize the visual detection of NO₂ through real-time signal changes.

2D Materials for Skin-Mountable Electronic Devices

Skin-mountable devices that can directly measure various biosignals and external stimuli and communicate the information to the users have been actively studied owing to increasing demand for wearable electronics and newer healthcare systems. Research on skin-mountable devices is mainly focused on those materials and mechanical design aspects that satisfy the device fabrication requirements on unusual substrates like skin and also for achieving good sensing capabilities and stable device operation in high-strain conditions. 2D materials that are atomically thin and possess unique electrical and optical properties offer several important features that can address the challenging needs in wearable, skin-mountable electronic devices. Herein, recent research progress on skin-mountable devices based on 2D materials that exhibit a variety of device functions including information input and output and in vitro and in vivo healthcare and diagnosis is reviewed. The challenges, potential solutions, and perspectives on trends for future work are also discussed.

Recent Advances on Conducting Polymers Based Nanogenerators for Energy Harvesting

With the rapid growth of numerous portable electronics, it is critical to develop high-performance, lightweight, and environmentally sustainable energy generation and power supply systems. The flexible nanogenerators, including piezoelectric nanogenerators (PENG) and triboelectric nanogenerators (TENG), are currently viable candidates for combination with personal devices and wireless sensors to achieve sustained energy for long-term working circumstances due to their great mechanical qualities, superior environmental adaptability, and outstanding energy-harvesting performance. Conductive materials for electrode as the critical component in nanogenerators, have been intensively investigated to optimize their performance and avoid high-cost and time-consuming manufacture processing. Recently, because of their low cost, large-scale production, simple synthesis procedures, and controlled electrical conductivity, conducting polymers (CPs) have been utilized in a wide range of scientific domains. CPs have also become increasingly significant in nanogenerators. In this review, we summarize the recent advances on CP-based PENG and TENG for biomechanical energy harvesting. A thorough overview of recent advancements and development of CP-based nanogenerators with various configurations are presented and prospects of scientific and technological challenges from performance to potential applications are discussed.

Micro-Nano Processing of Active Layers in Flexible Tactile Sensors via Template Methods: A Review

Template methods are regarded as an important method for micro-nano processing in the active layer of flexible tactile sensors. These template methods use physical/chemical processes to introduce micro-nano structures on the active layer, which improves many properties including sensitivity, response/recovery time, and detection limit. However, since the processing process and applicable conditions of the template method have not yet formed a perfect system, the development and commercialization of flexible tactile sensors based on the template method are still at a relatively slow stage. Despite the above obstacles, advances in microelectronics, materials science, nanoscience, and other disciplines have laid the foundation for various template methods, enabling the continuous development of flexible tactile sensors. Therefore, a comprehensive and systematic review of flexible tactile sensors based on the template method is needed to further promote progress in this field. Here, the unique advantages and shortcomings of various template methods are summarized in detail and discuss the research progress and challenges in this field. It is believed that this review will have a significant impact on many fields of flexible electronics, which is beneficial to promote the cross-integration of multiple fields and accelerate the development of flexible electronic devices.

Flexible Sandwich-Structured Electromagnetic Interference Shielding Nanocomposite Films with Excellent Thermal Conductivities

With the rapid development and popularization of smart, portable, and wearable flexible electronic devices, urgent demands have been raised for flexible electromagnetic interference (EMI) shielding films to solve related electromagnetic pollution problems. With polyvinyl alcohol (PVA) as polymer matrix, the sandwich-structured EMI shielding nanocomposite films are prepared via electrospinning-laying-hot pressing technology, where Fe₃ O₄ /PVA composite electrospun nanofibers in the top and bottom layers and Ti₃ C₂ T_x /PVA composite electrospun nanofibers in the middle layer. Owing to the electrospinning process and the successful construction of the sandwich structure, when the amounts of Ti₃ C₂ T_x and Fe₃ O₄ are respectively only 13.3 and 26.7 wt%, the EMI shielding effectiveness (EMI SE) of the sandwich-structured EMI shielding nanocomposite films reach 40 dB with the thickness of 75 µm, higher than that of (Fe₃ O₄ /Ti₃ C₂ T_x )/PVA EMI shielding nanocomposite films (21 dB) prepared based on blending-electrospinning-hot pressing process under the same amounts of fillers. Furthermore, the prepared sandwich-structured EMI shielding nanocomposite films possess excellent thermal conductivities and mechanical properties. This novel kind of flexible sandwich-structured EMI shielding nanocomposite films with excellent EMI shielding performances, thermal conductivities, and mechanical properties presents broad application prospects in the fields of EMI shielding and protection for high-power, portable, and wearable flexible electronic devices.

Carbon Nanotube Wearable Sensors for Health Diagnostics

This perspective article highlights a recent surge of interest in the application of textiles containing carbon nanotube (CNT) sensors for human health monitoring. Modern life puts more and more pressure on humans, which translates into an increased number of various health disorders. Unfortunately, this effect either decreases the quality of life or shortens it prematurely. A possible solution to this problem is to employ sensors to monitor various body functions and indicate an upcoming disease likelihood at its early stage. A broad spectrum of materials is currently under investigation for this purpose, some of which already entered the market. One of the most promising materials in this field are CNTs. They are flexible and of high electrical conductivity, which can be modulated upon several forms of stimulation. The article begins with an illustration of techniques for how wearable sensors can be built from them. Then, their application potential for tracking various health parameters is presented. Finally, the article ends with a summary of this field's progress and a vision of the key directions to domesticate this concept.

Laser-assisted micropyramid patterned PDMS encapsulation of 1D tellurium nanowires on cellulose paper for highly sensitive strain sensor and its photodetection studies

This work demonstrates the fabrication of tellurium-nanowires (Te-NWs)/paper based device encapsulated using laser assisted mircopyramid patterned polydimethylsiloxane (PDMS) films. Although there are multiple reports published on 1D Te, most of them are limited to establishing its properties and studying its behavior as a sensor and research on the utilization of Te-NWs for physical sensors remain unexplored. Further, reports on p-type photodetectors also remain scarce. The fabricated Te-NWs/paper with micropyramid structured PDMS films encapsulation was used as a strain sensor, and it exhibited considerable improvement (∼60%) in sensitivity compared to smooth PDMS films. The gauge factor of the developed strain sensor was found to be ∼15.3. In addition, fabricated Te-NWs/paper device with contacts was used as a photodetector and it showed photoresponsivity of ∼22.5 mA W^-1and ∼14.5 mA W^-1in visible and NIR regions, respectively. Furthermore, the device exhibited long-term mechanical stability under harsh deformations. Fabricated 1D Te-NWs/paper device was utilized as a strain sensor to monitor the angular movements in the human body and successfully monitored various human motions, including wrist bending, finger knuckle, elbow joint, and knee joint. The successful demonstration of Te-NWs based physical sensors and utilization in broadband photodetectors opens avenues of research for tellurium based flexible and wearable devices.

Applications of 2D-Layered Palladium Diselenide and Its van der Waals Heterostructures in Electronics and Optoelectronics

The rapid development of two-dimensional (2D) transition-metal dichalcogenides has been possible owing to their special structures and remarkable properties. In particular, palladium diselenide (PdSe₂) with a novel pentagonal structure and unique physical characteristics have recently attracted extensive research interest. Consequently, tremendous research progress has been achieved regarding the physics, chemistry, and electronics of PdSe₂. Accordingly, in this review, we recapitulate and summarize the most recent research on PdSe₂, including its structure, properties, synthesis, and applications. First, a mechanical exfoliation method to obtain PdSe₂ nanosheets is introduced, and large-area synthesis strategies are explained with respect to chemical vapor deposition and metal selenization. Next, the electronic and optoelectronic properties of PdSe₂ and related heterostructures, such as field-effect transistors, photodetectors, sensors, and thermoelectric devices, are discussed. Subsequently, the integration of systems into infrared image sensors on the basis of PdSe₂ van der Waals heterostructures is explored. Finally, future opportunities are highlighted to serve as a general guide for physicists, chemists, materials scientists, and engineers. Therefore, this comprehensive review may shed light on the research conducted by the 2D material community.

Wearable and Implantable Soft Bioelectronics: Device Designs and Material Strategies

High-performance wearable and implantable devices capable of recording physiological signals and delivering appropriate therapeutics in real time are playing a pivotal role in revolutionizing personalized healthcare. However, the mechanical and biochemical mismatches between rigid, inorganic devices and soft, organic human tissues cause significant trouble, including skin irritation, tissue damage, compromised signal-to-noise ratios, and limited service time. As a result, profuse research efforts have been devoted to overcoming these issues by using flexible and stretchable device designs and soft materials. Here, we summarize recent representative research and technological advances for soft bioelectronics, including conformable and stretchable device designs, various types of soft electronic materials, and surface coating and treatment methods. We also highlight applications of these strategies to emerging soft wearable and implantable devices. We conclude with some current limitations and offer future prospects of this booming field.

The Microbiome Meets Nanotechnology: Opportunities and Challenges in Developing New Diagnostic Devices

Monitoring of the human microbiome is an emerging area of diagnostics for personalized medicine. Here, the potential of different nanomaterials and nanobiosensing technologies is reviewed for the development of novel diagnostic devices for the detection and measurement of microbiome-related biomarkers. Moreover, the current and future landscape of microbiome-based diagnostics is defined by exploring the advantages and disadvantages of current nanotechnology-based approaches, especially in the context of developing point-of-care (PoC) devices that would meet the international guidelines known as REASSURED (Real-time connectivity; Ease of specimen collection; Affordability; Sensitivity; Specificity; User-friendliness; Rapid & robust operation; Equipment-free; and Deliverability). Finally, the strategies of the latest international scientific consortia working in this field are analyzed, the current microbiome diagnostics market are reported and the principal ethical, legal, and societal issues related to microbiome R&D and innovation are discussed.

Interface Engineering of Flexible Piezoresistive Sensors via Near-Field Electrospinning Processed Spacer Layers

The interface contact between the active material and its neighboring metal electrodes dominates the sensing response of mainstream high-sensitivity piezoresistive pressure sensors. However, the properties of such interface are often difficult to control and preserve owing to the limited strategies to precisely engineer the surface structure and mechanical property of the active material. Here, a top-down fabrication method to create a grid-like polyurethane fiber-based spacer layer at the interface between a piezoresistive layer and its contact electrodes is proposed. The tuning of the period and thickness of the spacer layer is conveniently achieved by a programmable near-field electrospinning process, and the influence of the spacer structure on the sensing performance is systematically investigated. The sensor with the optimized spacer layer shows a widened sensing range (230 kPa) while maintaining a high sensitivity (1.91 kPa^-1 ). Furthermore, the output current fluctuation of the sensors during a 74 000-cycle test is drastically reduced from 14.28% (without a spacer) to 3.63% (with a spacer), demonstrating greatly enhanced long-term reliability. The new near-field electrospinning-based strategy is capable of tuning sensor responses without changing the active material, providing a universal and scalable path to engineer the performances of contact-dominant sensors.

Reduced Fracture Strength of 2D Materials Induced by Interlayer Friction

The potential applications of 2D layered materials (2DLMs) as the functional membranes in flexible electronics and nano-electromechanical systems emphasize the role of the mechanical properties of these materials. Interlayer interactions play critical roles in affecting the mechanical properties of 2DLMs, and nevertheless the understanding of their relationship remains incomplete. In the present work, it is reported that the fracture strength of few-layer (FL) WS₂ can be weakened by the interlayer friction among individual layers with the assistance of finite element simulations and density functional theory (DFT) calculations. The reduced fracture strength can be also observed in FL WSe₂ but with a lesser extent, which is attributed to the difference in the interlayer sliding energies of WS₂ and WSe₂ as confirmed by DFT calculations. Moreover, the tip-membrane friction can give rise to the underestimation of the Young's modulus except for the membrane nonlinearity. These results give deep insights into the influence of interfacial interactions on the mechanical properties of 2DLMs, and suggest that importance should be also attached to the interlayer interactions during the design of nanodevices with 2DLMs as the functional materials.

N-doped reduced graphene oxide-PEDOT nanocomposites for implementation of a flexible wideband antenna for wearable wireless communication applications

We report a flexible and highly efficient wideband slot antenna based on a highly conductive composite of poly(3,4-ethylenedioxythiophene) (PEDOT) and N-doped reduced graphene oxide (N-doped rGO) for wearable applications. The high conductivity of this hybrid material with low sheet resistance of 0.56 Ω/square, substantial thickness of 55μm, and excellent mechanical resilience (<5.5% resistance change after 1000 bending cycles) confirmed this composite to be a suitable antenna conductor. The antenna achieved an estimated conduction efficiency close to 80% over a bandwidth from 3 to 8 GHz. Moreover, the successful operation of a realized antenna prototype has been demonstrated in free space and as part of a wearable camera system. The read range of the system was measured to be 271.2 m, which is 23 m longer than that of the original monopole antennas provided by the supplier. The synergistic effects between the dual conjugated structures of N-doped rGO and PEDOT in a single composite with fine distribution and interfacial interactions are critical to the demonstrated material performance. The N-doped rGO sheet reinforces the mechanical stability whereas the PEDOT functions as additive and/or binder, leading to an improved electrical and mechanical performance compared to that of the graphene and PEDOT alone. This high-performing nanocomposite material meets requirements for antenna design and opens the door for diverse future non-metallic flexible electronic device developments.

Recent Advances in Natural Functional Biopolymers and Their Applications of Electronic Skins and Flexible Strain Sensors

In order to replace nonrenewable resources and decrease electronic waste disposal, there is a rapidly rising demand for the utilization of reproducible and degradable biopolymers in flexible electronics. Natural biopolymers have many remarkable characteristics, including light weight, excellent mechanical properties, biocompatibility, non-toxicity, low cost, etc. Thanks to these superior merits, natural functional biopolymers can be designed and optimized for the development of high-performance flexible electronic devices. Herein, we provide an insightful overview of the unique structures, properties and applications of biopolymers for electronic skins (e-skins) and flexible strain sensors. The relationships between properties and sensing performances of biopolymers-based sensors are also investigated. The functional design strategies and fabrication technologies for biopolymers-based flexible sensors are proposed. Furthermore, the research progresses of biopolymers-based sensors with various functions are described in detail. Finally, we provide some useful viewpoints and future prospects of developing biopolymers-based flexible sensors.

Multipurpose and Reusable Ultrathin Electronic Tattoos Based on PtSe2 and PtTe2

Wearable bioelectronics with emphasis on the research and development of advanced person-oriented biomedical devices have attracted immense interest in the past decade. Scientists and clinicians find it essential to utilize skin-worn smart tattoos for on-demand and ambulatory monitoring of an individual's vital signs. Here, we report on the development of ultrathin platinum-based two-dimensional dichalcogenide (Pt-TMDs)-based electronic tattoos as advanced building blocks of future wearable bioelectronics. We made these ultrathin electronic tattoos out of large-scale synthesized platinum diselenide (PtSe₂) and platinum ditelluride (PtTe₂) layered materials and used them for monitoring human physiological vital signs, such as the electrical activity of the heart and the brain, muscle contractions, eye movements, and temperature. We show that both materials can be used for these applications; yet, PtTe₂ was found to be the most suitable choice due to its metallic structure. In terms of sheet resistance, skin contact, and electrochemical impedance, PtTe₂ outperforms state-of-the-art gold and graphene electronic tattoos and performs on par with medical-grade Ag/AgCl gel electrodes. The PtTe₂ tattoos show 4 times lower impedance and almost 100 times lower sheet resistance compared to monolayer graphene tattoos. One of the possible prompt implications of this work is perhaps in the development of advanced human-machine interfaces. To display the application, we built a multi-tattoo system that can easily distinguish eye movement and identify the direction of an individual's sight.

Evaluating the Possibility of Translating Technological Advances in Non-Invasive Continuous Lactate Monitoring into Critical Care

Lactate is widely measured in critically ill patients as a robust indicator of patient deterioration and response to treatment. Plasma concentrations represent a balance between lactate production and clearance. Analysis has typically been performed with the aim of detecting tissue hypoxia. However, there is a diverse range of processes unrelated to increased anaerobic metabolism that result in the accumulation of lactate, complicating clinical interpretation. Further, lactate levels can change rapidly over short spaces of time, and even subtle changes can reflect a profound change in the patient's condition. Hence, there is a significant need for frequent lactate monitoring in critical care. Lactate monitoring is commonplace in sports performance monitoring, given the elevation of lactate during anaerobic exercise. The desire to continuously monitor lactate in athletes has led to the development of various technological approaches for non-invasive, continuous lactate measurements. This review aims firstly to reflect on the potential benefits of non-invasive continuous monitoring technology within the critical care setting. Secondly, we review the current devices used to measure lactate non-invasively outside of this setting and consider the challenges that must be overcome to allow for the translation of this technology into intensive care medicine. This review will be of interest to those developing continuous monitoring sensors, opening up a new field of research.

Hierarchically Rough Structured and Self-Powered Pressure Sensor Textile for Motion Sensing and Pulse Monitoring

Nowadays, real-time human motion sensing and pulse monitoring can provide significant basis for health assessment and medical diagnosis. Nevertheless, it is still a big challenge to design a lightweight, flexible, and energy-sustainable pressure sensor with high sensitivity and breathability. Here, we fabricated a triboelectric all-fiber structured pressure sensor via a facile electrospinning technique. The constructed sensor textile holds a composite structure made up of a polyvinylidene fluoride/Ag nanowire nanofibrous membrane (NFM), an ethyl cellulose NFM, and two layers of conductive fabrics. This wearable device with high shape adaptability exhibited excellent sensing capability because of the introduced hierarchically rough structure on the nanofibers. The sensitivity can reach up to 1.67 and 0.20 V·kPa^-1 in the pressure range of 0-3 and 3-32 kPa, respectively. The fabricated sensor textile also showed a superior mechanical stability even after continuous operation of 7200 working cycles. This sensor textile was easily conformable on different desired body parts for dynamic motion sensing and real-time pulse monitoring. It can work in a self-powered manner to detect and quantify various human motions associated with joints, such as elbows, knees, and ankles. Additionally, it can be placed on the carotid artery to capture the pulse signals, serving as a reliable way to reflect the state of health. This work has great possibilities to promote the rapid advancement and broad applications of multifunctional pressure sensors and next-generation wearable electronics.