Better safe than sorry: Understanding the toxicological properties of inorganic nanoparticles manufactured for biomedical applications

Synthesis and characterization of different nano-hydroxyapatites and their impact on dental enamel following topical application for dental bleaching

OBJECTIVE

This study aims to synthesize, characterize, and assess the penetration of hydrogen peroxide (HP), color change (CC), and surface morphology changes after the application of two distinct nano-hydroxyapatite (nano-HAp).

METHODS

Two nano-HAp were previously synthesized by co-precipitation: one with rod-shaped particles (RS) and the other with spherical-shaped particles (SS). The surface charge of the nano-HAp particles was determined at varying pH levels and characterized by X-ray diffraction patterns and Fourier transform infrared spectroscopy. The morphology of the samples was assessed using scanning electron microscopy (SEM). The nano-HAp particles were applied before the dental bleaching procedure. Forty teeth were divided into four groups (n = 10) according to the bleaching treatment: no treatment, bleaching with 35 % HP only, RS application and bleaching with 35 % HP, and SS application and bleaching with 35 % HP. HP concentration (µg mL-1) was measured using UV-Vis, while CC was evaluated with a digital spectrophotometer (ΔEab, ΔE00 and WID). Additionally, four teeth from each group were selected for SEM analysis. Statistical analysis encompassed one-way ANOVA, Tukey's, and Dunnet's tests.

RESULTS

RS and SS were successfully synthesized by coprecipitation, primarily differing in pH during synthesis. Both variations of nano-HAp morphology significantly reduced HP diffusion into the pulp chamber (p < 0.001). Regarding enamel morphology, groups analyzed post dental bleaching exhibited greater HAp deposition on the enamel surface. Notably, this deposition did not impede CC.

SIGNIFICANCE

The utilization of different nano-HAp morphologies prior to dental bleaching appears to be a promising strategy for mitigating adverse effects associated with dental bleaching procedures.

Artificial intelligence in nanotechnology for treatment of diseases

Nano-based drug delivery systems (DDSs) have demonstrated the ability to address challenges posed by therapeutic agents, enhancing drug efficiency and reducing side effects. Various nanoparticles (NPs) are utilised as DDSs with unique characteristics, leading to diverse applications across different diseases. However, the complexity, cost and time-consuming nature of laboratory processes, the large volume of data, and the challenges in data analysis have prompted the integration of artificial intelligence (AI) tools. AI has been employed in designing, characterising and manufacturing drug delivery nanosystems, as well as in predicting treatment efficiency. AI's potential to personalise drug delivery based on individual patient factors, optimise formulation design and predict drug properties has been highlighted. By leveraging AI and large datasets, developing safe and effective DDSs can be accelerated, ultimately improving patient outcomes and advancing pharmaceutical sciences. This review article investigates the role of AI in the development of nano-DDSs, with a focus on their therapeutic applications. The use of AI in DDSs has the potential to revolutionise treatment optimisation and improve patient care.

Self-stacked small molecules for ultrasensitive, substrate-free Raman imaging in vivo

Raman spectroscopy using surface-enhanced Raman scattering (SERS) nanoprobes represents an ultrasensitive and high-precision technique for in vivo imaging. Clinical translation of SERS nanoprobes has been hampered by biosafety concerns about the metal substrates used to enhance Raman signals. We report a set of small molecules with bis-thienyl-substituted benzobisthiadiazole structures that enhance Raman signal through self-stacking rather than external substrates. In our technique, called stacking-induced charge transfer-enhanced Raman scattering (SICTERS), the self-stacked small molecules form an ordered spatial arrangement that enables three-dimensional charge transfer between neighboring molecules. The Raman scattering cross-section of SICTERS nanoprobes is 1350 times higher than that of conventional SERS gold nanoprobes of similar particle size. SICTERS outperforms SERS in terms of in vivo imaging sensitivity, resolution and depth. SICTERS is capable of noninvasive Raman imaging of blood and lymphatic vasculatures, which has not been achieved by SERS. SICTERS represents an alternative technique to enhance Raman scattering for guiding the design of ultrasensitive substrate-free Raman imaging probes.

Interaction of anionic Fe3O4 nanoparticles with lipid vesicles: a review on deformation and poration under various conditions

This review focuses on the deformation and poration of lipid vesicles caused by the interaction of anionic magnetite nanoparticles (MNPs). Effects of various factors, such as surface charge density, salt and sugar concentrations in buffer, membrane cholesterol content, polymer-grafted phospholipid, and membrane potential have been discussed for the interaction of MNPs with lipid vesicles. To quantify these effects on the vesicles, compactness, fraction of deformation and poration, dynamics of membrane permeation, and kinetics of membrane permeation have been critically evaluated. The review explores the potential advancements as well as future directions of the research field in the biomedical application of MNPs.

A Comprehensive Review of Nanoparticles: From Classification to Application and Toxicity

Nanoparticles are structures that possess unique properties with high surface area-to-volume ratio. Their small size, up to 100 nm, and potential for surface modifications have enabled their use in a wide range of applications. Various factors influence the properties and applications of NPs, including the synthesis method and physical attributes such as size and shape. Additionally, the materials used in the synthesis of NPs are primary determinants of their application. Based on the chosen material, NPs are generally classified into three categories: organic, inorganic, and carbon-based. These categories include a variety of materials, such as proteins, polymers, metal ions, lipids and derivatives, magnetic minerals, and so on. Each material possesses unique attributes that influence the activity and application of the NPs. Consequently, certain NPs are typically used in particular areas because they possess higher efficiency along with tenable toxicity. Therefore, the classification and the base material in the NP synthesis hold significant importance in both NP research and application. In this paper, we discuss these classifications, exemplify most of the major materials, and categorize them according to their preferred area of application. This review provides an overall review of the materials, including their application, and toxicity.

Innovative Formulation Platform: Paving the Way for Superior Protein Therapeutics with Enhanced Efficacy and Broadened Applications

Protein therapeutics offer high therapeutic potency and specificity; the broader adoptions and development of protein therapeutics, however, have been constricted by their intrinsic limitations such as inadequate stability, immunogenicity, suboptimal pharmacokinetics and biodistribution, and off-target effects. This review describes a platform technology that formulates individual protein molecules with a thin formulation layer of crosslinked polymers, which confers the protein therapeutics with high activity, enhanced stability, controlled release capability, reduced immunogenicity, improved pharmacokinetics and biodistribution, and ability to cross the blood brain barriers. Based on currently approved protein therapeutics, this formulating platform affords the development of a vast family of superior protein therapeutics with improved efficacy and broadened indications at significantly reduced cost.

Exploring Sustainable Agriculture with Nitrogen-Fixing Cyanobacteria and Nanotechnology

The symbiotic relationship between nitrogen-fixing cyanobacteria and plants offers a promising avenue for sustainable agricultural practices and environmental remediation. This review paper explores the molecular interactions between nitrogen-fixing cyanobacteria and nanoparticles, shedding light on their potential synergies in agricultural nanotechnology. Delving into the evolutionary history and specialized adaptations of cyanobacteria, this paper highlights their pivotal role in fixing atmospheric nitrogen, which is crucial for ecosystem productivity. The review discusses the unique characteristics of metal nanoparticles and their emerging applications in agriculture, including improved nutrient delivery, stress tolerance, and disease resistance. It delves into the complex mechanisms of nanoparticle entry into plant cells, intracellular transport, and localization, uncovering the impact on root-shoot translocation and systemic distribution. Furthermore, the paper elucidates cellular responses to nanoparticle exposure, emphasizing oxidative stress, signaling pathways, and enhanced nutrient uptake. The potential of metal nanoparticles as carriers of essential nutrients and their implications for nutrient-use efficiency and crop yield are also explored. Insights into the modulation of plant stress responses, disease resistance, and phytoremediation strategies demonstrate the multifaceted benefits of nanoparticles in agriculture. Current trends, prospects, and challenges in agricultural nanotechnology are discussed, underscoring the need for responsible and safe nanoparticle utilization. By harnessing the power of nitrogen-fixing cyanobacteria and leveraging the unique attributes of nanoparticles, this review paves the way for innovative, sustainable, and efficient agricultural practices.

Toxicity of Large and Small Surface-Engineered Upconverting Nanoparticles for In Vitro and In Vivo Bioapplications

In this study, spherical or hexagonal NaYF4:Yb,Er nanoparticles (UCNPs) with sizes of 25 nm (S-UCNPs) and 120 nm (L-UCNPs) were synthesized by high-temperature coprecipitation and subsequently modified with three kinds of polymers. These included poly(ethylene glycol) (PEG) and poly(N,N-dimethylacrylamide-co-2-aminoethylacrylamide) [P(DMA-AEA)] terminated with an alendronate anchoring group, and poly(methyl vinyl ether-co-maleic acid) (PMVEMA). The internalization of nanoparticles by rat mesenchymal stem cells (rMSCs) and C6 cancer cells (rat glial tumor cell line) was visualized by electron microscopy and the cytotoxicity of the UCNPs and their leaches was measured by the real-time proliferation assay. The comet assay was used to determine the oxidative damage of the UCNPs. An in vivo study on mice determined the elimination route and potential accumulation of UCNPs in the body. The results showed that the L- and S-UCNPs were internalized into cells in the lumen of endosomes. The proliferation assay revealed that the L-UCNPs were less toxic than S-UCNPs. The viability of rMSCs incubated with particles decreased in the order S-UCNP@Ale-(PDMA-AEA) > S-UCNP@Ale-PEG > S-UCNPs > S-UCNP@PMVEMA. Similar results were obtained in C6 cells. The oxidative damage measured by the comet assay showed that neat L-UCNPs caused more oxidative damage to rMSCs than all coated UCNPs while no difference was observed in C6 cells. An in vivo study indicated that L-UCNPs were eliminated from the body via the hepatobiliary route; L-UCNP@Ale-PEG particles were almost eliminated from the liver 96 h after intravenous application. Pilot fluorescence imaging confirmed the limited in vivo detection capabilities of the nanoparticles.

Dual pH/redox-responsive hyperbranched polymeric nanocarriers with TME-trigger size shrinkage and charge reversible ability for amplified chemotherapy of breast cancer

A novel pH/redox-responsive hyperbranched MeO-PEG-b-(NIPAAm-co-PBAE) nanoparticles (NPs) were designed with size shrinkage and charge-reversible potential for targeted delivery of docetaxel (DTX) to MDA-MB-231 cell lines. In the tumor microenvironment (TME), amine protonation induces charge reversal and disulfide bond cleavage under high TME GSH concentration causing size shrinkage, improved deep tumor penetration, and active targeting of the therapeutic agents. These nano drug delivery systems (NDDSs) significantly promoted cancer cell uptake (~ 100% at 0.5 h), facilitating site-specific delivery and deep tumor penetration. The MTT assay revealed significantly higher cytotoxicity (P value < 0.0001) for DTX-loaded NPs compared to free DTX. Cell cycle analysis revealed G2/M (58.3 ± 2.1%) and S (21.5 ± 1.3%) arrest for DTX-loaded NPs, while free DTX caused G2/M (67.9 ± 1.1%) and sub-G1 (10.3 ± 0.8%) arrest. DTX-loaded NPs induced higher apoptosis (P value < 0.001) in MDA-MB-231 cells (71.5 ± 2.8%) compared to free DTX (42.3 ± 3.1%). Western blotting and RT-PCR assays confirmed significant up-regulation of protein levels and apoptotic genes by DTX-loaded NPs compared to free DTX. In conclusion, TME-responsive charge reversal and size-shrinkable smart NDDSs designed based on low pH, and high glutathione (GSH), offer more effective site-specific delivery of therapeutic agents to tumors.

pH/glutathione dual-responsive copper sulfide-coated organic mesoporous silica for synergistic chemo-photothermal therapy

Nanodrug delivery systems (NDSs), such as mesoporous silica, have been widely studied because of their high specific surface area, high loading rate, and easy modification; however, they are not easily metabolized and excreted by the human body and may be potentially harmful. Hence, we aimed to examine the synergistic anti-tumor effects of ex vivo chemo-photothermal therapy to develop a rational and highly biocompatible treatment protocol for tumors. We constructed a biodegradable NDS using organic mesoporous silica with a tetrasulfide bond structure, copper sulfide core, and folic acid-modified surface (CuS@DMONs-FA-DOX-PEG) to target a tumor site, dissociate, and release the drug. The degradation ability, photothermal conversion ability, hemocompatibility, and in vitro and in vivo anti-tumor effects of the CuS@DMONs-FA-DOX-PEG nanoparticles were evaluated. Our findings revealed that the nanoparticles encapsulated in copper sulfide exhibited significant photothermal activity and optimal photothermal conversion rate. Further, the drug was accurately delivered and released into the target tumor cells, annihilating them. This study demonstrated the successful preparation, safety, and synergistic anti-tumor effects of chemo-photothermal therapeutic nanomaterials.

Recent Developments in CaCO3 Nano-Drug Delivery Systems: Advancing Biomedicine in Tumor Diagnosis and Treatment

Calcium carbonate (CaCO3), a natural common inorganic material with good biocompatibility, low toxicity, pH sensitivity, and low cost, has a widespread use in the pharmaceutical and chemical industries. In recent years, an increasing number of CaCO3-based nano-drug delivery systems have been developed. CaCO3 as a drug carrier and the utilization of CaCO3 as an efficient Ca2+ and CO2 donor have played a critical role in tumor diagnosis and treatment and have been explored in increasing depth and breadth. Starting from the CaCO3-based nano-drug delivery system, this paper systematically reviews the preparation of CaCO3 nanoparticles and the mechanisms of CaCO3-based therapeutic effects in the internal and external tumor environments and summarizes the latest advances in the application of CaCO3-based nano-drug delivery systems in tumor therapy. In view of the good biocompatibility and in vivo therapeutic mechanisms, they are expected to become an advancing biomedicine in the field of tumor diagnosis and treatment.

Stimuli-responsive biodegradable silica nanoparticles: From native structure designs to biological applications

Due to their inherent advantages, silica nanoparticles (SiNPs) have greatly potential applications as bioactive materials in biosensors/biomedicine. However, the long-term and nonspecific accumulation in healthy tissues may give rise to toxicity, thereby impeding their widespread clinical application. Hence, it is imperative and noteworthy to develop biodegradable and clearable SiNPs for biomedical purposes. Recently, the design of multi-stimuli responsive SiNPs to improve degradation efficiency under specific pathological conditions has increased their clinical trial potential as theranostic nanoplatform. This review comprehensively summaries the rational design and recent progress of biodegradable SiNPs under various internal and external stimuli for rapid in vivo degradation and clearance. In addition, the factors that affect the biodegradation of SiNPs are also discussed. We believe that this systematic review will offer profound stimulus and timely guide for further research in the field of SiNP-based nanosensors/nanomedicine.

Toxicity prediction of nanoparticles using machine learning approaches

Nanoparticle toxicity analysis is critical for evaluating the safety of nanomaterials due to their potential harm to the biological system. However, traditional experimental methods for evaluating nanoparticle toxicity are expensive and time-consuming. As an alternative approach, machine learning offers a solution for predicting cellular responses to nanoparticles. This study focuses on developing ML models for nanoparticle toxicity prediction. The training dataset used for building these models includes the physicochemical properties of nanoparticles, exposure conditions, and cellular responses of different cell lines. The impact of each parameter on cell death was assessed using the Gini index. Five classifiers, namely Decision Tree, Random Forest, Support Vector Machine, Naïve Bayes, and Artificial Neural Network, were employed to predict toxicity. The models' performance was compared based on accuracy, sensitivity, specificity, area under the curve, F measure, K-fold validation, and classification error. The Gini index indicated that cell line, exposure dose, and tissue are the most influential factors in cell death. Among the models tested, Random Forest exhibited the highest performance in the given dataset. Other models demonstrated lower performance compared to Random Forest. Researchers can utilize the Random Forest model to predict nanoparticle toxicity, resulting in cost and time savings for toxicity analysis.

Silicon-based nanoparticles for mitigating the effect of potentially toxic elements and plant stress in agroecosystems: A sustainable pathway towards food security

Due to their size, flexibility, biocompatibility, large surface area, and variable functionality nanoparticles have enormous industrial, agricultural, pharmaceutical and biotechnological applications. This has led to their widespread use in various fields. The advancement of knowledge in this field of research has altered our way of life from medicine to agriculture. One of the rungs of this revolution, which has somewhat reduced the harmful consequences, is nanotechnology. A helpful ingredient for plants, silicon (Si), is well-known for its preventive properties under adverse environmental conditions. Several studies have shown how biogenic silica helps plants recover from biotic and abiotic stressors. The majority of research have demonstrated the benefits of silicon-based nanoparticles (Si-NPs) for plant growth and development, particularly under stressful environments. In order to minimize the release of brine, heavy metals, and radioactive chemicals into water, remove metals, non-metals, and radioactive components, and purify water, silica has also been used in environmental remediation. Potentially toxic elements (PTEs) have become a huge threat to food security through their negative impact on agroecosystem. Si-NPs have the potentials to remove PTEs from agroecosystem and promote food security via the promotion of plant growth and development. In this review, we have outlined the various sources and ecotoxicological consequences of PTEs in agroecosystems. The potentials of Si-NPs in mitigating PTEs were extensively discussed and other applications of Si-NPs in agriculture to foster food security were also highlighted.

Recent advances in fluorescence imaging-guided photothermal therapy and photodynamic therapy for cancer: From near-infrared-I to near-infrared-II

Phototherapy (including photothermal therapy, PTT; and photodynamic therapy, PDT) has been widely used for cancer treatment, but conventional PTT/PDT show limited therapeutic effects due to the lack of disease recognition ability. The integration of fluorescence imaging with PTT/PDT can reveal tumor locations in a real-time manner, holding great potential in early diagnosis and precision treatment of cancers. However, the traditional fluorescence imaging in the visible and near-infrared-I regions (VIS/NIR-I, 400-900 nm) might be interfered by the scattering and autofluorescence from tissues, leading to a low imaging resolution and high false positive rate. The deeper near-infrared-II (NIR-II, 1000-1700 nm) fluorescence imaging can address these interferences. Combining NIR-II fluorescence imaging with PTT/PDT can significantly improve the accuracy of tumor theranostics and minimize damages to normal tissues. This review summarized recent advances in tumor PTT/PDT and NIR-II fluorophores, especially discussed achievements, challenges and prospects around NIR-II fluorescence imaging-guided PTT/PDT for cancers.

Dumbbells, chains, and ribbons: anisotropic self-assembly of isotropic nanoparticles

Functionalizing the surface of metal nanoparticles can assure their stability in solution or mediate their self-assembly into aggregates with controlled shapes. Here we present a computational study of the colloidal aggregation of gold nanoparticles (Au NPs) isotropically functionalized by a mixture of charged and hydrophobic ligands. We show that, by varying the relative proportion of the two ligands, the NPs form anisotropic aggregates with markedly different topologies: dumbbells, chains, or ribbons. In all cases, two kinds of connections keep the aggregates together: hydrophobic bonds and ion bridges. We show that the anisotropy of the aggregates derives from the NP shell reshaping due to the formation of the hydrophobic links, while ion bridges are accountable for the "secondary structure" of the aggregates. Our findings provide a general physical principle that can also be exploited in different self-assembled systems: anisotropic/directional aggregation can be achieved starting from isotropic objects with a soft, deformable surface.

The Apoptosis Inhibitor Protein Survivin Is a Critical Cytoprotective Resistor against Silica-Based Nanotoxicity

Exposure to nanoparticles is inevitable as they become widely used in industry, cosmetics, and foods. However, knowledge of their (patho)physiological effects on biological entry routes of the human body and their underlying molecular mechanisms is still fragmented. Here, we examined the molecular effects of amorphous silica nanoparticles (aSiNPs) on cell lines mimicking the alveolar-capillary barrier of the lung. After state-of-the-art characterization of the used aSiNPs and the cell model, we performed cell viability-based assays and a protein analysis to determine the aSiNP-induced cell toxicity and underlying signaling mechanisms. We revealed that aSiNPs induce apoptosis in a dose-, time-, and size-dependent manner. aSiNP-induced toxicity involves the inhibition of pro-survival pathways, such as PI3K/AKT and ERK signaling, correlating with reduced expression of the anti-apoptotic protein Survivin on the protein and transcriptional levels. Furthermore, induced Survivin overexpression mediated resistance against aSiNP-toxicity. Thus, we present the first experimental evidence suggesting Survivin as a critical cytoprotective resistor against silica-based nanotoxicity, which may also play a role in responses to other NPs. Although Survivin's relevance as a biomarker for nanotoxicity needs to be demonstrated in vivo, our data give general impetus to investigate the pharmacological modulation of Survivin`s functions to attenuate the harmful effects of acute or chronic inhalative NP exposure.

Emerging role of nanotechnology in treatment of non-alcoholic fatty liver disease (NAFLD)

Non-alcoholic fatty liver disease (NAFLD) is a prevailing health challenge that requires urgent innovative interventions. This review explores the role of nanotechnology as a promising potential in the treatment of NAFLD. It delineates the limitations of the current management strategies for NAFLD and highlights the new nanotechnology-based treatments including nanoemulsions, liposomes, micelles, polymeric nanoparticles, nanogels, inorganic nanoparticles, and zinc oxide nanoparticles. Despite the optimism surrounding the nanotechnological approach, the review underscores the need to address the limitations such as technical challenges, potential toxicity, and ethical considerations that impede the practical application of nanotechnology in NAFLD management. It advocates for collaborative efforts from researchers, clinicians, ethicists, and policymakers to achieve safe, effective, and equitable nanotechnology-based treatments for NAFLD. See also Figure 1(Fig. 1).

Effects of polyethylene glycol-grafted phospholipid on the anionic magnetite nanoparticles-induced deformation and poration in giant lipid vesicles

The hydrophilic polymer polyethylene glycol-grafted phospholipid has been used extensively in the study of artificial vesicles, nanomedicine, and antimicrobial peptides/proteins. In this research, the effects of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N- [methoxy (polyethylene glycol)-2000] (abbreviated PEG-DOPE) on the deformation and poration of giant unilamellar vesicles (GUVs)-induced by anionic magnetite nanoparticles (NPs) have been investigated. For this, the size of the NPs used was 18 nm, and their concentration in the physiological solution was 2.00 μg/mL. GUVs were prepared using the natural swelling method comprising 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and PEG-DOPE. The mole% of PEG-DOPE in the membranes were 0, 2, and 5%. The degree of deformation of the GUVs was quantified by the parameter compactness (Com), which is 1.0 for the spherical-shaped GUVs. The value of Com increases with time during the interactions of NPs with GUVs for any concentration of PEG-DOPE, but the rate of increase is significantly influenced by the PEG-DOPE concentration in the membranes. The average compactness increases with the increase of PEG-DOPE%, and after 60 min of NPs interaction, the values of average compactness for 0, 2, and 5% PEG-DOPE were 1.19 ± 0.02, 1.26 ± 0.03 and 1.35 ± 0.05, respectively. The fraction of deformation (Frd) also increased with the increase of PEG-DOPE%, and at 60 min, the values of Frd for 0 and 5% PEG-DOPE were 0.47 ± 0.02 and 0.63 ± 0.02, respectively. The fraction of poration (Frp) increased with the increase of PEG-DOPE, and at 60 min, the values of Frp for 0 and 5% PEG-DOPE were 0.25 ± 0.02 and 0.48 ± 0.02, respectively. Hence, the presence of PEG-grafted phospholipid in the membranes greatly enhances the anionic magnetite NPs-induced deformation and poration of giant vesicles.

High-Dose Exposure to Polymer-Coated Iron Oxide Nanoparticles Elicits Autophagy-Dependent Ferroptosis in Susceptible Cancer Cells

Ferroptosis, a form of iron-dependent, lipid peroxidation-driven cell death, has been extensively investigated in recent years, and several studies have suggested that the ferroptosis-inducing properties of iron-containing nanomaterials could be harnessed for cancer treatment. Here we evaluated the potential cytotoxicity of iron oxide nanoparticles, with and without cobalt functionalization (Fe₂O₃ and Fe₂O₃@Co-PEG), using an established, ferroptosis-sensitive fibrosarcoma cell line (HT1080) and a normal fibroblast cell line (BJ). In addition, we evaluated poly (ethylene glycol) (PEG)-poly(lactic-co-glycolic acid) (PLGA)-coated iron oxide nanoparticles (Fe₃O₄-PEG-PLGA). Our results showed that all the nanoparticles tested were essentially non-cytotoxic at concentrations up to 100 μg/mL. However, when the cells were exposed to higher concentrations (200-400 μg/mL), cell death with features of ferroptosis was observed, and this was more pronounced for the Co-functionalized nanoparticles. Furthermore, evidence was provided that the cell death triggered by the nanoparticles was autophagy-dependent. Taken together, the exposure to high concentrations of polymer-coated iron oxide nanoparticles triggers ferroptosis in susceptible human cancer cells.

Repositioned Natural Compounds and Nanoformulations: A Promising Combination to Counteract Cell Damage and Inflammation in Respiratory Viral Infections

Respiratory viral diseases are among the most important causes of disability, morbidity, and death worldwide. Due to the limited efficacy or side effects of many current therapies and the increase in antiviral-resistant viral strains, the need to find new compounds to counteract these infections is growing. Since the development of new drugs is a time-consuming and expensive process, numerous studies have focused on the reuse of commercially available compounds, such as natural molecules with therapeutic properties. This phenomenon is generally called drug repurposing or repositioning and represents a valid emerging strategy in the drug discovery field. Unfortunately, the use of natural compounds in therapy has some limitations, due to their poor kinetic performance and consequently reduced therapeutic effect. The advent of nanotechnology in biomedicine has allowed this limitation to be overcome, showing that natural compounds in nanoform may represent a promising strategy against respiratory viral infections. In this narrative review, the beneficial effects of some promising natural molecules, curcumin, resveratrol, quercetin, and vitamin C, which have been already studied both in native form and in nanoform, against respiratory viral infections are presented and discussed. The review focuses on the ability of these natural compounds, analyzed in in vitro and in vivo studies, to counteract inflammation and cellular damage induced by viral infection and provide scientific evidence of the benefits of nanoformulations in increasing the therapeutic potential of these molecules.

Organic and inorganic nanomaterials: fabrication, properties and applications

Nanomaterials and nanoparticles are a burgeoning field of research and a rapidly expanding technology sector in a wide variety of application domains. Nanomaterials have made exponential progress due to their numerous uses in a variety of fields, particularly the advancement of engineering technology. Nanoparticles are divided into various groups based on the size, shape, and structural morphology of their bodies. The 21st century's defining feature of nanoparticles is their application in the design and production of semiconductor devices made of metals, metal oxides, carbon allotropes, and chalcogenides. For the researchers, these materials then opened a new door to a variety of applications, including energy storage, catalysis, and biosensors, as well as devices for conversion and medicinal uses. For chemical and thermal applications, ZnO is one of the most stable n-type semiconducting materials available. It is utilised in a wide range of products, from luminous materials to batteries, supercapacitors, solar cells to biomedical photocatalysis sensors, and it may be found in a number of forms, including pellets, nanoparticles, bulk crystals, and thin films. The distinctive physiochemical characteristics of semiconducting metal oxides are particularly responsible for this. ZnO nanostructures differ depending on the synthesis conditions, growth method, growth process, and substrate type. A number of distinct growth strategies for ZnO nanostructures, including chemical, physical, and biological methods, have been recorded. These nanostructures may be synthesized very simply at very low temperatures. This review focuses on and summarizes recent achievements in fabricating semiconductor devices based on nanostructured materials as 2D materials as well as rapidly developing hybrid structures. Apart from this, challenges and promising prospects in this research field are also discussed.

Intestinal response of mussels to nano-TiO2 and pentachlorophenol in the presence of predator

With the development of industry, agriculture and intensification of human activities, a large amount of nano-TiO₂ dioxide and pentachlorophenol have entered aquatic environment, causing potential impacts on the health of aquatic animals and ecosystems. We investigated the effects of predators, pentachlorophenol (PCP) and nano titanium dioxide (nano-TiO₂) on the gut health (microbiota and digestive enzymes) of the thick-shelled mussel Mytilus coruscus. Nano-TiO₂, as the photocatalyst for PCP, enhanced to toxic effects of PCP on the intestinal health of mussels, and they made the mussels more vulnerable to the stress from predators. Nano-TiO₂ particles with smaller size exerted a larger negative effect on digestive enzymes, whereas the size effect on gut bacteria was insignificant. The presence of every two of the three factors significantly affected the population richness and diversity of gut microbiota. Our findings revealed that the presence of predators, PCP, and nano-TiO₂ promoted the proliferation of pathogenic bacteria and inhibited digestive enzyme activity. This research investigated the combined stress on marine mussels caused by nanoparticles and pesticides in the presence of predators and established a theoretical framework for explaining the adaptive mechanisms in gut microbes and the link between digestive enzymes and gut microbiota.

Predicting the toxicity of nanoparticles using artificial intelligence tools: a systematic review

Nanoparticles have been used extensively in different scientific fields. Due to the possible destructive effects of nanoparticles on the environment or the biological systems, their toxicity evaluation is a crucial phase for studying nanomaterial safety. In the meantime, experimental approaches for toxicity assessment of various nanoparticles are expensive and time-consuming. Thus, an alternative technique, such as artificial intelligence (AI), could be valuable for predicting nanoparticle toxicity. Therefore, in this review, the AI tools were investigated for the toxicity assessment of nanomaterials. To this end, a systematic search was performed on PubMed, Web of Science, and Scopus databases. Articles were included or excluded based on pre-defined inclusion and exclusion criteria, and duplicate studies were excluded. Finally, twenty-six studies were included. The majority of the studies were conducted on metal oxide and metallic nanoparticles. In addition, Random Forest (RF) and Support Vector Machine (SVM) had the most frequency in the included studies. Most of the models demonstrated acceptable performance. Overall, AI could provide a robust, fast, and low-cost tool for the evaluation of nanoparticle toxicity.

Synthesis and Characterization of Magnetoplasmonic Air-Stable Au@FeCo

The synthesis of FeCo alloys as highly magnetic nanoparticles has been valuable, as far as applications for magnetic nanoparticles are concerned. However, recently, a field of magnetoplasmonics in which magnetic nanoparticles such as the FeCo alloys doped with plasmonic materials such as Au and Ag to create a hybrid nanostructure with both properties has emerged. These magnetoplasmonic metamaterials have greatly enhanced the limit of detection of analytes in spectroscopic methods, as well as providing a more widely applicable nanoparticle to broaden the use of FeCo alloys even further. Herein, we discuss the synthesis of high-yield and fairly monodisperse spherical FeCo and Au-doped FeCo (Au@FeCo) with varying compositions of Au synthesized via the thermal decomposition of iron pentacarbonyl (Fe(CO)₅) and dicobalt octacarbonyl (Co₂(CO)₈), followed by the addition of Au atoms using triphenylphosphine gold(I) chloride ((Ph₃P)AuCl) via both coprecipitation and by delayed addition methods. The products were separated using a hand-held magnet, and then characterized via ultraviolet-visible light (UV-vis), scanning electron microscopy coupled with energy-dispersive X-ray analysis (SEM-EDX), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), flame atomic absorption spectrometry (F-AAS), and magnetization measurements. Optical studies revealed a plasmonic peak at 550 nm in the Au@FeCo nanoparticles that had a gold content (%Au) of >2% (by weight), determined using F-AAS. Colocation of the Fe, Co, and Au were demonstrated through EDX analysis. Location of the Au atoms in the core were seen through high-resolution bright-field imaging. To understand the use of these nanoparticles for potential application in therapeutics and/or electronics, resistance measurements were performed to assess power loss as a function of frequency. We also achieved magnetization values as high as 150 emu/g and as low as 50 emu/g for gold-loaded samples based on %Au by weight. This paves the way to continue to develop magneto-plasmonic structures chemically using these synthesis strategies.

Gold nanoparticles capped with L-glycine, L-cystine, and L-tyrosine: toxicity profiling and antioxidant potential

Biomolecules-based surface modifications of nanomaterials may yield effective and biocompatible nanoconjugates. This study was designed to evaluate gold nanoconjugates (AuNCs) for their altered antioxidant potential. Gold nanoparticles (AuNPs) and their conjugates gave SPR peaks in the ranges of 512-525 nm, with red or blueshift for different conjugates. Cys-AuNCs demonstrated enhanced (p < 0.05) and Gly-AuNCs (p > 0.05) displayed reduced DPPH activity. Gly-AuNCs and Tyr-AuNCs displayed enhanced ferric-reducing power and hydrogen peroxide scavenging activity, respectively. Cadmium-intoxicated mice were exposed to gold nanomaterials, and the level of various endogenous parameters, i.e., CAT, GST, SOD, GSH, and MTs, was evaluated. GSH and MTs in liver tissues of the cadmium-exposed group (G2) were elevated (p < 0.05), while other groups showed nonsignificance deviations than the control group. It is concluded that these nanoconjugates might provide effective nanomaterials for biomedical applications. However, more detailed studies for their safety profiling are needed before their practical applications.

Light-activated gold nanorods for effective therapy of venous malformation

Gold nanorods have been studied extensively in the field of tumor therapy but have not been explored in the treatment of venous malformation (VM), which is a common vascular disease in clinic practice lacking an effective therapeutic approach. Herein we reported a nanoplatform of CD31 antibody-conjugated gold nanorods for the photothermal therapy of venous malformation. We immobilized CD31 antibodies on gold nanorods using standard 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC)/N-hydroxysulfosuccinimide sodium (NHS) amine coupling strategies. Besides, a VM xenograft model suitable for testing therapeutic efficacy was established by isolating and culturing VM patient endothelial cells. In vitro experiments indicated that anti-CD31 gold nanorods (GNRs) combined with photothermal therapy (PTT) contributed to the suppression of proliferation and activation of the apoptosis pathway. For in vivo experiments, anti-CD31 GNRs were locally injected into VM xenograft models followed by near infrared (NIR) 808 ​nm laser irradiation. Notably, VM on the mice was destroyed and absorbed. The anti-CD31 GNRs nanoplatform may serve as a new strategy for the treatment of VM which is of good biosafety and high value of applications.

Strontium Carbonate and Strontium-Substituted Calcium Carbonate Nanoparticles Form Protective Deposits on Dentin Surface and Enhance Human Dental Pulp Stem Cells Mineralization

Strontium acetate is applied for dental hypersensitivity treatment; however, the use of strontium carbonates for this purpose has not been described. The use of Sr-carbonate nanoparticles takes advantage of both the benefits of strontium on dentin mineralization and the abrasive properties of carbonates. Here in, we aimed to synthesize strontium carbonate and strontium-substituted calcium carbonate nanoparticles and test them as potential compounds in active dentifrices for treating dental hypersensitivity. For this, SrCO₃, Sr_0.5Ca_0.5CO₃, and CaCO₃ nanoparticles were precipitated using Na₂CO₃, SrCl₂, and/or CaCl₂ as precursors. Their morphology and crystallinity were evaluated by electron microscopy (SEM) and X-ray diffraction, respectively. The nanoparticles were added to a poly (vinyl alcohol) gel and used to brush dentin surfaces isolated from human third molars. Dentin chemical composition before and after brushing was investigated by infrared spectroscopy (FTIR) and X-ray dispersive energy spectroscopy. Dentin tubule morphology, obliteration, and resistance of the coatings to acid attack were investigated by SEM and EDS. The cytotoxicity and ability of the particles to trigger the mineralization of hDPSCs in vitro were studied. Dentin brushed with the nanoparticles was coated by a mineral layer that was also able to penetrate the tubules, while CaCO₃ remained as individual particles on the surface. FTIR bands related to carbonate groups were intensified after brushing with either SrCO₃ or Sr_0.5Ca_0.5CO₃. The shift of the phosphate-related FTIR band to a lower wavenumber indicated that strontium replaced calcium on the dentin structure after treatment. The coating promoted by SrCO₃ or Sr_0.5Ca_0.5CO₃ resisted the acid attack, while calcium and phosphorus were removed from the top of the dentin surface. The nanoparticles were not toxic to hDPSCs and elicited mineralization of the cells, as revealed by increased mineral nodule formation and enhanced expression of COL1, ALP, and RUNX2. Adding Sr_0.5Ca_0.5CO₃ as an active ingredient in dentifrices formulations may be commercially advantageous since this compound combines the well-known abrasive properties of calcium carbonate with the mineralization ability of strontium, while the final cost remains between the cost of CaCO₃ and SrCO₃. The novel Sr_0.5Ca_0.5CO₃ nanoparticles might emerge as an alternative for the treatment of dental hypersensitivity.

Exposure to Multiwall Carbon Nanotubes Promotes Fibrous Proliferation by Production of Matrix Metalloproteinase-12 via NF-κB Activation in Chronic Peritonitis

The toxicologic effects of nanomaterials, such as carbon nanotubes (CNTs), on the immune system are understood well. However, the precise relationship between long-term exposure to CNTs and chronic inflammation remains unclear. In this study, a mouse model of chronic peritonitis was established using i.p. injection of multiwalled CNTs treated by the Taquann method with high dispersion efficiency. Chronic peritonitis with fibrosis was observed in Taquann-treated multiwalled CNT (T-CNT)-injected mice, but not in Taquann-treated titanium dioxide-injected mice. In vivo and in vitro experiments showed that matrix metalloproteinase-12 (MMP-12) of macrophages was up-regulated by T-CNT to enhance fibroblast activation and profibrotic molecule expression in fibroblasts. In addition, T-CNT-induced peritonitis reduced MMP-12 expression in Nfκb1-/- mice, suggesting that MMP-12-producing macrophages play a key role in chronic inflammation due to T-CNT exposure through NF-κB activation. The results of this study could be helpful in understanding the molecular toxicity of nanomaterial and chronic inflammation.

Effects of cholesterol on the anionic magnetite nanoparticle-induced deformation and poration of giant lipid vesicles

We have investigated the effects of cholesterol on the deformation and poration of giant unilamellar vesicles (GUVs) induced by anionic magnetite nanoparticles (NPs). Negatively charged lipid, neutral lipid, and cholesterol were used to prepare the charged GUVs (surface charge density of membranes - 0.16 C m-2), while only neutral lipid and cholesterol were used to prepare the neutral GUVs. Cholesterol content varied from 0 to 40 mole% for preparing the biologically relevant membranes. The degree of deformation has been characterized by compactness, the value of which remains at 1.0 for spherical GUVs. The value of compactness increases with time for both membranes, but this increase depends on cholesterol content. The average compactness decreases with cholesterol content, and at 60 min, the values are 1.280 ± 0.002 and 1.131 ± 0.010 for 0 and 40 mole% cholesterol containing charged GUVs. The average compactness is relatively lower for neutral GUVs for the corresponding cholesterol. Membrane poration has been investigated by the leakage of calcein, which indicates a two-state transition model. The fraction of deformation is higher for charged GUVs than for neutral ones, while the fraction of poration shows the opposite result. Both the fractions decrease with cholesterol content.

Influence of sugar concentration on the vesicle compactness, deformation and membrane poration induced by anionic nanoparticles

Sugar plays a vital role in the structural and functional characteristics of cells. Hence, the interaction of NPs with cell membranes in the presence of sugar concentrations is important for medicinal and pharmacological innovations. This study integrated three tools: giant unilamellar vesicles (GUVs), anionic magnetite nanoparticles (NPs), and sugar concentrations, to understand a simplified mechanism for interactions between the vesicle membranes and NPs under various sugar concentrations. We focused on changing the sugar concentration in aqueous solution; more precisely, sucrose inside the GUVs and glucose outside with equal osmolarity. 1,2-dioleoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (sodium salt) (DOPG) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) were used to prepare the charged membranes of 40mole%DOPG/60mole%DOPC-GUVs, whereas only DOPC was used to prepare the neutral membranes. Phase contrast fluorescence microscopy shows that the adherence of 18 nm magnetite NPs with anionic charge depends on the sugar concentration. The alterations of GUVs induced by the NPs are characterized in terms of i) vesicle compactness, ii) deformation, and iii) membrane poration. The presence of sugar provides additional structural stability to the GUVs and reduces the effects of the NPs with respect to these parameters; more precisely, the higher the sugar concentration, the smaller the alteration induced by the NPs. The differences in NPs effects are explained by the change in the type of interaction between sugar molecules and lipid membranes, namely enthalpy and entropy-driven interaction, respectively. In addition, such alterations are influenced by the surface charge density of the lipid bilayer. The surface pressure of membranes due to the adsorption of NPs is responsible for inducing the poration in membranes. The differences in deformation and poration in charged and neutral GUVs under various sugar concentrations are discussed based on the structure of the head of lipid molecules.

A review on the latest developments of mesoporous silica nanoparticles as a promising platform for diagnosis and treatment of cancer

Cancer is the second cause of human mortality after cardiovascular disease around the globe. Conventional cancer therapies are chemotherapy, radiation, and surgery. In fact, due to the lack of absolute specificity and high drug concentrations, early recognition and treatment of cancer with conventional approaches have become challenging issues in the world. To mitigate against the limitations of conventional cancer chemotherapy, nanomaterials have been developed. Nanomaterials exhibit particular properties that can overcome the drawbacks of conventional therapies such as lack of specificity, high drug concentrations, and adverse drug reactions. Among nanocarriers, mesoporous silica nanoparticles (MSNs) have gained increasing attention due to their well-defined pore size and structure, high surface area, good biocompatibility and biodegradability, ease of surface modification, and stable aqueous dispersions. This review highlights the current progress with the use of MSNs for the delivery of chemotherapeutic agents for the diagnosis and treatment of cancer. Various stimuli-responsive gatekeepers, which endow the MSNs with on-demand drug delivery, surface modification strategies for targeting purposes, and multifunctional MSNs utilized in drug delivery systems (DDSs) are also addressed. Also, the capability of MSNs as flexible imaging platforms is considered. In addition, physicochemical attributes of MSNs and their effects on cancer therapy with a particular focus on recent studies is emphasized. Moreover, major challenges to the use of MSNs for cancer therapy, biosafety and cytotoxicity aspects of MSNs are discussed.

An inter-laboratory comparison of an NLRP3 inflammasome activation assay and dendritic cell maturation assay using a nanostructured lipid carrier and a polymeric nanomedicine, as exemplars

Nanoparticles including nanomedicines are known to be recognised by and interact with the immune system. As these interactions may result in adverse effects, for safety evaluation, the presence of such interactions needs to be investigated. Nanomedicines in particular should not unintendedly interact with the immune system, since patient’s exposure is not minimised as in the case of ‘environmental’ nanoparticles, and repeated exposure may be required. NLRP3 inflammasome activation and dendritic cell (DC) maturation are two types of immune mechanisms known to be affected by nanoparticles including nanomedicines. NLRP3 inflammasome activation results in production of the pro-inflammatory cytokines IL-1β and IL-18, as well as a specific type of cell death, pyroptosis. Moreover, chronic NLRP3 inflammasome activation has been related to several chronic diseases. Upon maturation, DC activate primary T cells; interference with this process may result in inappropriate activation and skewing of the adaptive immune response. Here, we evaluated the effect of two nanomedicines, representing nanostructured lipid carriers and polymers, on these two assays. Moreover, with a view to possible future standardisation and regulatory application, these assays were subject to an inter-laboratory comparison study using common SOPs. One laboratory performed three independent NLRP3 inflammasome activation experiments, while the other performed a single experiment. Two laboratories each performed three independent DC maturation experiments. While the nanostructured lipid carrier only showed marginal effects, the polymers showed major cytotoxicity. No evidence for inflammasome activation or DC maturation was demonstrated. Intra- and inter-laboratory comparison showed clearly reproducible results.

Application of Nanoparticles in Tumour Targeted Drug Delivery and Vaccine

Cancer is a major cause of death worldwide, and nearly 1 in 6 deaths each year is caused by cancer. Traditional cancer treatment strategies cannot completely solve cancer recurrence and metastasis. With the development of nanotechnology, the study of nanoparticles (NPs) has gradually become a hotspot of medical research. NPs have various advantages. NPs exploit the enhanced permeability and retention (EPR) of tumour cells to achieve targeted drug delivery and can be retained in tumours long-term. NPs can be used as a powerful design platform for vaccines as well as immunization enhancers. Liposomes, as organic nanomaterials, are widely used in the preparation of nanodrugs and vaccines. Currently, most of the anticancer drugs that have been approved and entered clinical practice are prepared from lipid materials. However, the current clinical conversion rate of NPs is still extremely low, and the transition of NPs from the laboratory to clinical practice is still a substantial challenge. In this paper, we review the in vivo targeted delivery methods, material characteristics of NPs and the application of NPs in vaccine preparation. The application of nanoliposomes is also emphasized. Furthermore, the challenges and limitations of NPs are briefly discussed.

Reduction of environmental chemicals, toxicity and particulate matter in wet scrubber device to achieve zero emissions

The fine particles generated by the foundry industry are present in the atmosphere; they have an impact on the climate because of their influence on atmospheric radioactive phenomena. As a result of this scenario, there is a rising amount of legislation restricting the emission of pollutants from foundry industries and related businesses. In response to this situation, many researchers have concentrated on end-of-pipe technologies, one of which is the wet scrubber, which is a device that is primarily used in foundries to control pollution and is one of the devices that has been incorporated. The disadvantage of using this wet scrubber, on the other hand, is that it contributes to secondary pollution when it is used. In order to combat secondary pollution, a model of an enhanced wet scrubber system that incorporates a multi-sand filtering technology was developed. The performance of this redesigned wet scrubber system was evaluated with the use of computational fluid dynamics (CFD) software. In CFD, the Reynolds stress model was applied for simulation. The pressure magnitudes and velocity magnitudes are obtained by this simulation. The volume fraction of the dust was evaluated through the DPM approach. Because of the introduction of the filtration tank's computation, it was discovered that successful filtration was accomplished using sand filters, meaning that environmental chemicals and particles were totally filtered from 0.17 kg at the entrance to zero kg of particles at the outflow.

Impacts of four commonly used nanoparticles on the metabolism of a marine bivalve species, Tegillarca granosa

The rapid development of nanotechnology boosts the massive production and utilization of various nanoparticles (NPs). However, the NPs escaped into environments form emergent pollutants, which pose a potential threat to marine organisms and ecosystems. Due to their sessile filter-feeding lifestyle, marine bivalves live in pollution-prone coastal areas are more susceptible to land-sourced pollutants such as NPs. However, the impacts of many NPs on the metabolism, one of the most critical physiological processes of an organism, still remain largely unknown in bivalve species. To fill up this knowledge gap, in this study the impacts of four commonly used NPs (nZnO, nFe₂O₃, nCuO, and multi-walled carbon tube (MWCNT)) on the filtration rate, oxygen consumption rate, ammonia excretion rate, and O:N ratio were investigated in the blood clam, Tegillarca granosa. In addition, the expressions of ten key metabolism-related genes upon exposure to these NPs were also analyzed. The results demonstrated that exposure of blood clams to the NPs resulted in a reduction in the food intake (indicated by declined filtration rate), a shift in the metabolism substance, and disruptions in key metabolism-related molecular pathways (i.e., glycolysis and tricarboxylic acid cycle), which may render blood clam in energy shortage and thus pose significant threat to the health of this important bivalve species.

Evaluation of nano-silver concentrations using multi-media fate and transport models with different spatial resolutions

Due to the complexity of the environmental matrix and the limitation of the detection level, it is important to use models to evaluate environmental exposure to nanomaterials. Based on this, this research established two multi-media fate and transport models of silver nanoparticles (AgNPs) with respective coarse and fine spatial resolutions. Using the case of the spatial distribution of AgNPs in the Xiangjiang River, China, we compared how the spatial resolution of a model impacts modeling results. The results show that the process of heterogeneous aggregation has the greatest impact on the modeled concentration of AgNPs in water, and the heterogeneous aggregation of free AgNPs with natural colloids and settling down to sediments is the dominant mechanism responsible for the loss of AgNPs. In addition, the use of different spatial resolutions gives similar trends in the modeled AgNPs concentration, despite the difference in absolute levels. Our work also shows that the reliability and accuracy of the rate constant of heterogeneous aggregation has a great influence on the modeled AgNPs concentrations.

Phase-separating peptides for direct cytosolic delivery and redox-activated release of macromolecular therapeutics

Biomacromolecules are highly promising therapeutic modalities to treat various diseases. However, they suffer from poor cellular membrane permeability, limiting their access to intracellular targets. Strategies to overcome this challenge often employ nanoscale carriers that can get trapped in endosomal compartments. Here we report conjugated peptides that form pH- and redox-responsive coacervate microdroplets by liquid-liquid phase separation that readily cross the cell membrane. A wide range of macromolecules can be quickly recruited within the microdroplets, including small peptides, enzymes as large as 430 kDa and messenger RNAs (mRNAs). The therapeutic-loaded coacervates bypass classical endocytic pathways to enter the cytosol, where they undergo glutathione-mediated release of payload, the bioactivity of which is retained in the cell, while mRNAs exhibit a high transfection efficiency. These peptide coacervates represent a promising platform for the intracellular delivery of a large palette of macromolecular therapeutics that have potential for treating various pathologies (for example, cancers and metabolic diseases) or as carriers for mRNA-based vaccines.

Effect of long-term low concentrations of TiO2 nanoparticles on dewaterability of activated sludge and the relevant mechanism: the role of nanoparticle aging

Nanoparticles can undergo aging phenomena in sewage treatment systems, which alter their physical and chemical properties. However, the effect of aged nanoparticles on the dewatering performance of activated sludge under long-term low concentrations is yet to be reported in sewage treatment systems. Here, we compared the chronic effects of pristine and aged TiO₂ nanoparticles on the sludge dewatering index, which includes specific resistance to filtration (SRF) and bound water (BW) in a sequencing batch reactor (SBR) at μg/L concentration levels, and analyzed the relevant mechanisms. The results indicated that aging in the sludge supernatant altered the photosensitivity and water stability of nanoparticles, which was mainly due to the changes in the zeta potential and energy band of the particle and was ultimately attributed to the combined effect of particle surface inclusions such as organic matter and inorganic salt. At 10 μg/L, nanoparticles reduced the sludge dewaterability, which observed an improvement at 100 μg/L. This is because 10 μg/L promoted the secretion of extracellular polymeric substances (EPS), which regulated the structure of sludge flora and increased the abundance of secreted quorum sensing-acyl-homoserine lactones (QS-AHL) and EPS genera, while the corresponding exposure results for 100 μg/L were the opposite, owing to the damage and necrosis effects caused by exposure under long-term light, which reduced EPS production and increased sludge density. Interestingly, aging could alleviate the effects of two exposure concentrations on sludge dewatering, mainly because of the decrease in the photoactivity of the nanoparticles. The results of this study show that environmental aging could delay, but not reverse the results of exposure to specific concentrations of nanoparticles. However, the significantly different ecological effects of photosensitive nanoparticles with two environmentally relevant concentration should be refined and confirmed again in freshwater environments to provide a basis for subsequent scientific management and control of photosensitive nanoparticles.

Influence of the synthesis route on the spectroscopic, cytotoxic, and temperature-sensing properties of oleate-capped and ligand-free core/shell nanoparticles

The right choice of synthesis route for upconverting nanoparticles (UCNPs) is crucial for obtaining a well-defined product with a specific application capability. Thus we decided to compare the physicochemical, cytotoxic, and temperature-sensing properties of UCNPs obtained from different rare earth (RE) ions, which has been made for the first time in a single study. The core/shell NaYF₄:Yb³⁺,Er³⁺/NaYF₄ UCNPs were obtained by reaction in a mixture of oleic acid and octadecene, and their highly stable water colloids were prepared using the ligand-free modification method. Both oleate-capped and ligand-free UCNPs exhibited a bright upconversion emission upon 975 nm excitation. Moreover, slope values, emission quantum yields, and luminescence lifetimes confirmed an effective energy transfer between the Yb³⁺ and Er³⁺ ions. Additionally, the water colloids of the UCNPs showed temperature-sensing properties with a good thermal sensitivity level, higher than 1 % K^-1 at 358 K. Evaluation of the cytotoxicity profiles of the obtained products indicated that cell viability was decreased in a dose-dependent manner in the analyzed concentration range.

Microemulsion Based Nanostructures for Drug Delivery

Most of the active pharmaceutical compounds are often prone to display low bioavailability and biological degradation represents an important drawback. Due to the above, the development of a drug delivery system (DDS) that enables the introduction of a pharmaceutical compound through the body to achieve a therapeutic effect in a controlled manner is an expanding application. Henceforth, new strategies have been developed to control several parameters considered essential for enhancing delivery of drugs. Nanostructure synthesis by microemulsions (ME) consist of enclosing a substance within a wall material at the nanoscale level, allowing to control the size and surface area of the resulting particle. This nanotechnology has shown the importance on targeted drug delivery to improve their stability by protecting a bioactive compound from an adverse environment, enhanced bioavailability as well as controlled release. Thus, a lower dose administration could be achieved by minimizing systemic side effects and decreasing toxicity. This review will focus on describing the different biocompatible nanostructures synthesized by ME as controlled DDS for therapeutic purposes.

Reactive Oxygen Species-Responsive and Self-Illuminating Nanoparticles for Inflammation and Tumor Imaging

Reactive oxygen species (ROS) play a key role in various physiological and pathological processes. Abnormally elevated ROS levels are generally related to the pathogenesis of inflammatory diseases and tumors. Real-time imaging and quantification of ROS can not only provide new insight into mechanistic understanding of diseases associated with ROS but also facilitate high-throughput and high-content drug screening for these diseases. Here, the present protocol introduces ROS-responsive and self-illuminating nanoparticles with chemiluminescence (CL) and fluorescence (FL) properties that can serve as an effective nanoprobe for imaging of pathophysiology, including inflammation and tumor.

Blood compatibility evaluations of two-dimensional Ti3C2Txnanosheets

Two-dimensional (2D) nanomaterial Ti3C2Tx is a novel biomaterial used for medical apparatus. For its application, biosafety serves as a prerequisite for their use in vivo. So far, no research has systematically reported how Ti3C2Tx interacts with various components in the blood. In this work, we evaluated the hemocompatibility of Ti3C2Tx nanosheets which we prepared by HF etching. Effects of the concentration and size of Ti3C2Tx on the morphology and hemolysis rate of human red blood cells (RBCs), the structure and conformation of plasma proteins, the complement activation, as well as in vitro blood coagulation were studied. In general, Ti3C2Tx takes on good blood compatibility, but in the case of high concentration (>30 μg/mL) and "Small size" (about 100 nm), it led to the rupture of RBCs membrane and a higher rate of hemolysis. Meanwhile, platelets and complement were inclined to be activated with the increased concentration, accompanying the changed configuration of plasma proteins dependent on concentration. Surprisingly, the presence of Ti3C2Tx did not significantly disrupt the coagulation. In vitro cell culture, the results prove that when the Ti3C2Tx concentration is as high as 60μg/mL and still has good biological safety. By establishing a fuzzy mathematical model, it was proved that the hemocompatibility of Ti3C2Tx is more concentration-dependent than size-dependent, and the hemolysis rate is the most sensitive to the size and concentration of the Ti3C2Tx. These findings provide insight into the potential use of Ti3C2Tx as biofriendly nanocontainers for biomaterials in vivo.

Essential Oil Nanoemulsion as Eco-Friendly and Safe Preservative: Bioefficacy Against Microbial Food Deterioration and Toxin Secretion, Mode of Action, and Future Opportunities

Microbes are the biggest shareholder for the quantitative and qualitative deterioration of food commodities at different stages of production, transportation, and storage, along with the secretion of toxic secondary metabolites. Indiscriminate application of synthetic preservatives may develop resistance in microbial strains and associated complications in human health with broad-spectrum environmental non-sustainability. The application of essential oils (EOs) as a natural antimicrobial and their efficacy for the preservation of foods has been of present interest and growing consumer demand in the current generation. However, the loss in bioactivity of EOs from fluctuating environmental conditions is a major limitation during their practical application, which could be overcome by encapsulating them in a suitable biodegradable and biocompatible polymer matrix with enhancement to their efficacy and stability. Among different nanoencapsulated systems, nanoemulsions effectively contribute to the practical applications of EOs by expanding their dispersibility and foster their controlled delivery in food systems. In line with the above background, this review aims to present the practical application of nanoemulsions (a) by addressing their direct and indirect (EO nanoemulsion coating leading to active packaging) consistent support in a real food system, (b) biochemical actions related to antimicrobial mechanisms, (c) effectiveness of nanoemulsion as bio-nanosensor with large scale practical applicability, (d) critical evaluation of toxicity, safety, and regulatory issues, and (e) market demand of nanoemulsion in pharmaceuticals and nutraceuticals along with the current challenges and future opportunities.