Metal binding by bacteria from uranium mining waste piles and its technological applications

Dual-directional regulation of extracellular respiration in Shewanella oneidensis for intelligently treating multi-nuclide contamination

Radionuclide contamination has become a global environmental concern due to the high mobility and toxicity of certain isotopes. Bioreduction mediated by electrochemically active bacteria (EAB) with unique extracellular electron transfer (EET) capability is recognized as a promising approach for nuclear waste treatment. However, it is difficult to achieve bidirectional regulation of EET pathway through traditional genetic manipulation, limiting the bioremediation application of EAB. Here, we designed and optimized a novel Esa quorum sensing (EQS) system for highly efficient gene expression and interleaved cellular functional output. By promoting dimethyl sulfoxide reductase at low cell density and increasing the synthesis of electron conductive complex and flavins at high cell density, the EQS system dynamically switched the extracellular respiratory pathway of Shewanella oneidensis MR-1 according to cell density. The engineered strain exhibited precise switching and substantial improvement in the extracellular remediation of multiple nuclides, sequentially increasing the reduction of iodine IO3- and uranium U(VI) by 2.51- and 2.05-fold compared with the control, respectively. Furthermore, a mobile bacterial biofilm material was fabricated for collecting uranium precipitates coupled with U(VI) reduction. This work clearly demonstrates that EQS system contributes to the bidirectional regulation of EET pathway in EAB, providing an effective and refined strategy for bioremediation of multi-nuclide contamination.

Effects of uranium mining on the rhizospheric bacterial communities of three local plants on the Qinghai-Tibet Plateau

In this study, we used 16S high-throughput sequencing to investigate the effects of uranium mining on the rhizospheric bacterial communities and functions of three local plant species, namely, Artemisia frigida, Acorus tatarionwii Schott., and Salix oritrepha Schneid. The results showed that uranium mining significantly reduced the diversity of rhizospheric bacteria in the three local plant species, including the Shannon index and Simpson index (P < 0.05). Interestingly, we found that Sphingomonas and Pseudotrichobacter were enriched in the rhizosphere soil of the three local plants from uranium mining areas, indicating their important ecological role. The three plants were enriched in various dominant rhizospheric bacterial populations in the uranium mining area, including Vicinamidobacteriaceae, Nocardioides, and Gaiella, which may be related to the unique microecological environment of the plant rhizosphere. The rhizospheric bacterial community of A. tatarionwii plants from tailings and open-pit mines also showed a certain degree of differentiation, indicating that uranium mining is the main factor driving the differentiation of plant rhizosphere soil communities on the plateau. Functional prediction revealed that rhizospheric bacteria from different plants have developed different functions to cope with stress caused by uranium mining activities, including enhancing the translational antagonist Rof, the translation initiation factor 2B subunit, etc. This study explores for the first time the impact of plateau uranium mining activities on the rhizosphere microecology of local plants, promoting the establishment of effective soil microecological health monitoring indicators, and providing a reference for further soil pollution remediation in plateau uranium mining areas.

Lysinibacillus piscis sp. nov. isolated from the gut of mottled spinefoot Siganus fuscescens

A novel Lysinibacillus strain, designated KH24T, was isolated from the gut of Siganus fuscescens, a herbivorous fish, which was captured off the coast of Okinawa, Japan. Strain KH24T is a rod-shaped, Gram-stain-positive, spore-forming, and motile bacterium that forms off-white colonies. The 16S rRNA gene sequence of strain KH24T showed the highest similarity (97.4%) with Lysinibacillus pakistanensis JCM 18776T and L. irui IRB4-01T. Genomic similarities between strain KH24T and Lysinibacillus type strains, based on average nucleotide identity, digital DNA-DNA hybridization (genome-to-genome distance calculation), and average amino acid identity were 70.4-77.7%, 17.1-24.4%, and 69.2-81.2%, respectively, which were lower than species delineation thresholds. Strain KH24T growth occurred at pH values of 5.5-8.5, temperatures of 20-40 °C, and NaCl concentrations of 0-4.0%, and optimally at pH 7.0, 30 °C, and 0%, respectively. Unlike related Lysinibacillus type strains, strain KH24T could assimilate D-glucose, D-fructose, N-acetyl-glucosamine, amygdalin, arbutin, esculin, ferric citrate, salicin, D-cellobiose, D-maltose, D-sucrose, and gentiobiose. Major fatty acids included iso-C15:0 (45.8%), anteiso-C15:0 (15.1%), iso-C17:0 (12.6%), and anteiso-C17:0 (10.9%). Menaquinone-7 was the predominant quinone, and the major polar lipids were diphosphatidylglycerol, phosphatidylglycerol, and lysophosphatidylethanolamine. Based on its genetic and phenotypic properties, strain KH24T represents a novel species of the genus Lysinibacillus, for which the name Lysinibacillus piscis sp. nov. is proposed. The type strain is KH24T (= JCM 36611 T = KCTC 43676 T).

Insights into the biosynthesis of palladium nanoparticles for oxygen reduction reaction by genetically engineered bacteria of Shewanella oneidensis MR-1

Owing to the increasing need for green synthesis and environmental protection, the utilization of biological organism-derived carbons as supports for noble-metal electrocatalysts has garnered public interest. Nevertheless, the mechanism by which microorganisms generate nanometals has not been fully understood yet. In the present study, we used genetically engineered bacteria of Shewanella oneidensis MR-1 (∆SO4317, ∆SO4320, ∆SO0618 and ∆SO3745) to explore the effect of surface substances including biofilm-associated protein (bpfA), protein secreted by type I secretion systems (TISS) and type II secretion systems (T2SS), and lipopolysaccharide in microbial synthesis of metal nanoparticles. Results showed Pd/∆SO4317 (the catalyst prepared with the mutant ∆SO4317) shows better performance than other biocatalysts and commercial Pd/C, where the mass activity (MA) and specific activity (SA) of Pd/∆SO4317 are 3.1 and 2.1 times higher than those of commercial Pd/C, reaching 257.49 A g-1 and 6.85 A m-2 respectively. It has been found that the exceptional performance is attributed to the smallest particle size and the presence of abundant functional groups. Additionally, the absence of biofilms has been identified as a crucial factor in the formation of high-quality bio-Pd. Because the absence of biofilm can minimize metal agglomeration, resulting in uniform particle size dispersion. These findings provide valuable mechanical insights into the generation of biogenic metal nanoparticles and show potential industrial and environmental applications, especially in accelerating oxygen reduction reactions.

An Overview of Bacteria-Mediated Heavy Metal Bioremediation Strategies

Contamination-free groundwater is considered a good source of potable water. Even in the twenty-first century, over 90 percent of the population is reliant on groundwater resources for their lives. Groundwater influences the economical state, industrial development, ecological system, and agricultural and global health conditions worldwide. However, different natural and artificial processes are gradually polluting groundwater and drinking water systems throughout the world. Toxic metalloids are one of the major sources that pollute the water system. In this review work, we have collected and analyzed information on metal-resistant bacteria along with their genetic information and remediation mechanisms of twenty different metal ions [arsenic (As), mercury (Hg), lead (Pb), chromium (Cr), iron (Fe), copper (Cu), cadmium (Cd), palladium (Pd), zinc (Zn), cobalt (Co), antimony (Sb), gold (Au), silver (Ag), platinum (Pt), selenium (Se), manganese (Mn), molybdenum (Mo), nickel (Ni), tungsten (W), and uranium (U)]. We have surveyed the scientific information available on bacteria-mediated bioremediation of various metals and presented the data with responsible genes and proteins that contribute to bioremediation, bioaccumulation, and biosorption mechanisms. Knowledge of the genes responsible and self-defense mechanisms of diverse metal-resistance bacteria would help us to engineer processes involving multi-metal-resistant bacteria that may reduce metal toxicity in the environment.

A review on the green synthesis of nanoparticles, their biological applications, and photocatalytic efficiency against environmental toxins

Green synthesis of nanoparticles (NPs) using plant materials and microorganisms has evolved as a sustainable alternative to conventional techniques that rely on toxic chemicals. Recently, green-synthesized eco-friendly NPs have attracted interest for their potential use in various biological applications. Several studies have demonstrated that green-synthesized NPs are beneficial in multiple medicinal applications, including cancer treatment, targeted drug delivery, and wound healing. Additionally, due to their photodegradation activity, green-synthesized NPs are a promising tool in environmental remediation. Photodegradation is a process that uses light and a photocatalyst to turn a pollutant into a harmless product. Green NPs have been found efficient in degrading pollutants such as dyes, herbicides, and heavy metals. The use of microbes and flora in green synthesis technology for nanoparticle synthesis is biologically safe, cost-effective, and eco-friendly. Plants and microbes can now use and accumulate inorganic metallic ions in the environment. Various NPs have been synthesized via the bio-reduction of biological entities or their extracts. There are several biological and environmental uses for biologically synthesized metallic NPs, such as photocatalysis, adsorption, and water purification. Since the last decade, the green synthesis of NPs has gained significant interest in the scientific community. Therefore, there is a need for a review that serves as a one-stop resource that points to relevant and recent studies on the green synthesis of NPs and their biological and photocatalytic efficiency. This review focuses on the green fabrication of NPs utilizing diverse biological systems and their applications in biological and photodegradation processes.

Extracellular biomineralization of uranium and its toxicity alleviation to Bacillus thuringiensis X-27

Uranium biomineralization can slow uranium migration in the environment and thus prevent it from further contaminating the surroundings. Investigations into the uranium species, pH, inorganic phosphate (Pi) concentration, and microbial viability during biomineralization by microorganisms are crucial for understanding the mineralization mechanism. In this study, Bacillus thuringiensis X-27 was isolated from soil contaminated with uranium and was used to investigate the formation process of uranium biominerals induced by X-27. The results showed that as biomineralization proceeded, amorphous uranium-containing deposits were generated and transformed into crystalline minerals outside cells, increasing the overall concentration of uramphite. This is a cumulative rather than abrupt process. Notably, B. thuringiensis X-27 precipitated uranium outside the cell surface within 0.5 h, while the release of Pi into the extracellular environment and the change of pH to alkalescence further promoted the formation of uramphite. In addition, cell viability determination showed that the U(VI) biomineralization induced by B. thuringiensis X-27 was instrumental in alleviating the toxicity of U(VI) to cells. This work offers insight into the mechanism of U(VI) phosphate biomineralization and is a reference for bioremediation-related studies.

A novel and sustainable approach for biotransformation of phosphogypsum to calcium carbonate using urease producing Lysinibacillus sphaericus strain GUMP2

Phosphogypsum (CaSO₄) is produced as a waste by-product during phosphoric acid production in the fertilizer industry. Only 15% of worldwide phosphogypsum production is recycled, while 85% is stored in the vicinity of factories as huge piles resulting in environmental and health hazards. An extensively studied biotransformation of phosphogypsum to calcium carbonate or calcite (CaCO₃) using sulfate reducing bacteria (SRBs) is a prolonged process and results in the formation of extremely hazardous H₂S gas. Here we report for the first time a novel approach for biotransformation of phosphogypsum to CaCO₃ using urease producing Lysinibacillus sphaericus strain GUMP2. The strain could effectively transform phosphogypsum to crystalline, bead-shaped CaCO₃ precipitates. In a batch reactor with the PG loading rate of 60 g/L, 100% biotransformation was observed within seven days. After calcite recovery, the ammonium sulfate formed in the supernatant was recovered by precipitation. Urease-producing L. sphaericus strain GUMP2 could be used to remove the hazardous phosphogypsum from the environment by converting it to the industrially useful CaCO₃ and ammonium sulfate, a valuable agricultural fertilizer. This novel and sustainable approach could be a promising solution for the hazardous phosphogypsum in the phosphoric acid industries.

Nanomaterials as a sustainable choice for treating wastewater

Wastewater containing toxic substances is a major threat to the health of both aquatic and terrestrial ecosystems. In order to treat wastewater, nanomaterials are currently being studied intensively due to their unprecedented properties. The unique features of nanoparticles are prompting an increasing number of studies into their use in wastewater treatment. Although several studies have been undertaken in recent years, most of them did not focus on some of the nanomaterials that are now often utilized for wastewater treatment. It is essential to investigate the most recent advances in all the types of nanomaterials that are now frequently employed for wastewater treatment. The recent advancements in common nanomaterials used for sustainable wastewater treatment is comprehensively reviewed in this paper. This paper also thoroughly assesses unique features, proper utilization, future prospects, and current limitations of green nanotechnology in wastewater treatment. Zero-valent metal and metal oxide nanoparticles, especially iron oxides were shown to be more effective than traditional carbon nanotubes (CNTs) for recovering heavy metals in wastewater. Iron oxide achieved 75.9% COD (chemical oxygen demand) removal efficiency while titanium oxide (TiO₂) achieved 75.5% COD. Iron nanoparticles attained 72.1% methyl blue removal efficiency. However, since only a few types of nanomaterials have been commercialized, it is important to also focus on the economic feasibility of each nanomaterial. This study found that the large surface area, high reactivity, and strong mechanical properties of nanoparticles means they can be considered as a promising option for successful wastewater treatment.

Facile synthesis of nanomaterials as nanofertilizers: a novel way for sustainable crop production

Nutrient fertilization plays a major role in improving crop productivity and maintaining soil fertility. In the last few decades, the productivity of current agricultural practices highly depends on the use of chemical fertilizers. Major drawback of traditional fertilizers is their low crop nutrient use efficiency and high loss into water. Nanomaterial in agriculture is a multipurpose tool for increasing growth, development, and yield of plants. Nanotechnology facilitates the amplifying of agriculture production by reducing relevant losses and improving the input efficiency. Nanotechnology has emerged as an attractive field of research and has various agriculture applications, especially the use of nano-agrochemicals to increase nutrient use efficiency and agricultural yield. Nanofertilizers are more effective as compared to chemical fertilizers due to their cost-efficient, eco-friendly, non-toxic, and more stable in nature. Overall, this chapter focuses on synthesis of nanofertilizers through physical, chemical, and biological methods. This chapter will also explore the use of nano-enabled fertilizers to enhance the nutrient use efficiency for sustainable crop production, and global food safety.

Microbial Interventions in Bioremediation of Heavy Metal Contaminants in Agroecosystem

Soil naturally comprises heavy metals but due to the rapid industrialization and anthropogenic events such as uncontrolled use of agrochemicals their concentration is heightened up to a large extent across the world. Heavy metals are non-biodegradable and persistent in nature thereby disrupting the environment and causing huge health threats to humans. Exploiting microorganisms for the removal of heavy metal is a promising approach to combat these adverse consequences. The microbial remediation is very crucial to prevent the leaching of heavy metal or mobilization into the ecosystem, as well as to make heavy metal extraction simpler. In this scenario, technological breakthroughs in microbes-based heavy metals have pushed bioremediation as a promising alternative to standard approaches. So, to counteract the deleterious effects of these toxic metals, some microorganisms have evolved different mechanisms of detoxification. This review aims to scrutinize the routes that are responsible for the heavy metal(loid)s contamination of agricultural land, provides a vital assessment of microorganism bioremediation capability. We have summarized various processes of heavy metal bioremediation, such as biosorption, bioleaching, biomineralization, biotransformation, and intracellular accumulation, as well as the use of genetically modified microbes and immobilized microbial cells for heavy metal removal.

Molecular Mechanisms Underlying Bacterial Uranium Resistance

Environmental uranium pollution due to industries producing naturally occurring radioactive material or nuclear accidents and releases is a global concern. Uranium is hazardous for ecosystems as well as for humans when accumulated through the food chain, through contaminated groundwater and potable water sources, or through inhalation. In particular, uranium pollution pressures microbial communities, which are essential for healthy ecosystems. In turn, microorganisms can influence the mobility and toxicity of uranium through processes like biosorption, bioreduction, biomineralization, and bioaccumulation. These processes were characterized by studying the interaction of different bacteria with uranium. However, most studies unraveling the underlying molecular mechanisms originate from the last decade. Molecular mechanisms help to understand how bacteria interact with radionuclides in the environment. Furthermore, knowledge on these underlying mechanisms could be exploited to improve bioremediation technologies. Here, we review the current knowledge on bacterial uranium resistance and how this could be used for bioremediation applications.

Radioactive waste treatment technology: a review

Radioactive waste is generated from activities that utilize nuclear materials such as nuclear medicine or power plants. Depending on their half-life, they emit radiation continuously, ranging from seconds to millions of years. Exposure to ionizing radiation can cause serious harm to humans and the environment. Therefore, special attention is paid to the management of radioactive waste in order to deal with its large quantity and dangerous levels. Current treatment technologies are still being developed to improve efficiency in reducing the hazard level and waste volume, to minimize the impact on living organisms. Thus, the aim of this study was to provide an overview of the global radioactive waste treatment technologies that have been released in 2019–2021.

Metal removal by metallothionein and an acid phosphatase PhoN, surface-displayed on the cells of the extremophile, Deinococcus radiodurans

The utility of surface layer proteins (Hpi and SlpA) of the radiation resistant bacterium, Deinococcus radiodurans, was investigated for surface display and bioremediation of cadmium and uranium. The smtA gene, from Synechococcus elongatus (encoding the metal binding metallothionein protein), was cloned and over-expressed in D. radiodurans, either as such or as a chimeric gene fused with hpi ORF (Hpi-SmtA), or fused to the nucleotide sequence encoding the SLH domain of the SlpA protein (SLH-SmtA). The expressed fusion proteins localized to the deinococcal cell surface, while the SmtA protein localized to the cytoplasm. Recombinant cells surface-displaying the SLH-SmtA or Hpi-SmtA fusion proteins respectively removed 1.5-3 times more cadmium than those expressing only cytosolic SmtA. The deinococcal Hpi protein layer per se also contributed to U binding, by conferring substantial negative charge to deinococcal cell surface. The ORF of an acid phosphatase, PhoN was fused with the hpi or SLH domain DNA sequence and purified. Isolated Hpi-PhoN and SLH-PhoN, immobilized on deinococcal peptidoglycan showed efficient uranium precipitation (446 and 160 mg U/g biomass used respectively). The study demonstrates effective exploitation of the deinococcal S layer protein components for (a) cell surface-based sequestration of cadmium, and (b) cell-free preparations for uranium remediation.

Microbial interaction with and tolerance of radionuclides: underlying mechanisms and biotechnological applications

Radionuclides (RNs) generated by nuclear and civil industries are released in natural ecosystems and may have a hazardous impact on human health and the environment. RN-polluted environments harbour different microbial species that become highly tolerant of these elements through mechanisms including biosorption, biotransformation, biomineralization and intracellular accumulation. Such microbial-RN interaction processes hold biotechnological potential for the design of bioremediation strategies to deal with several contamination problems. This paper, with its multidisciplinary approach, provides a state-of-the-art review of most research endeavours aimed to elucidate how microbes deal with radionuclides and how they tolerate ionizing radiations. In addition, the most recent findings related to new biotechnological applications of microbes in the bioremediation of radionuclides and in the long-term disposal of nuclear wastes are described and discussed.

Influence of Uranium Concentration and pH on U-Phosphate Biomineralization by Caulobacter OR37

Uranium contamination of soils and groundwater in the United States represents a significant health risk and will require multiple remediation approaches. Microbial phosphatase activity coupled to the addition of an organic P source has recently been studied as a remediation strategy that provides an extended release of inorganic P (Pi) into U-contaminated sites, resulting in the precipitation of meta-autunite minerals. Previous laboratory- and field-based biomineralization studies have investigated environments with relatively high U concentrations (>20 μM). However, most contaminated sites have much lower U concentrations (<2 μM). The Environmental Protection Agency (EPA) limit for U in drinking water is 0.126 μM. Reaching this regulatory limit becomes challenging as U concentrations approach autunite solubility. We studied the precipitation of U(VI)-phosphate minerals by an environmental isolate of Caulobacter sp. (strain OR37) from an Oak Ridge, Tennessee, U-contaminated site. Abiotic U(VI) solubility experiments reveal that U(VI)-phosphate minerals do not form in the presence of excess Pi (500 μM) when U(VI) concentrations are <1 μM and pH is <5. When OR37 cells are reacted under the same conditions with Pi or glycerol-2-phosphate, U(VI)-phosphate mineral formation was observed, along with the formation of intracellular polyphosphate granules. These results show that bacteria provide supersaturated microenvironments needed for U(VI)-phosphate mineralization while hydrolyzing organic P sources. This provides a pathway to lower U concentrations to below EPA limits for drinking water.

Chromium binding Bacillus cereus VITSH1-a promising candidate for heavy metal clean up

Bacteria survive metal stress by several mechanisms and metal binding is one such mechanism which has been screened in the present study to investigate the survival strategies of metal resistant bacteria. The production of siderophores, a metal chelating agent, was detected by chrome azurol S agar assay. The changes in cell wall studied by analysing the peptidoglycan and teichoic acid content indicated an increase in the cell wall content. Evaluation of morphological and physiological alterations like cell size, granularity analysed by SEM and flow cytometry analysis revealed an increase in cell size and granularity respectively. The transformation of phosphates monitored by ³¹ P NMR analysis indicated the presence of inorganic phosphate. Based on the cell wall changes and the ³¹ P NMR analysis, the surface charge of the organism was studied by zeta potential which displayed a difference at pH7.

Archaea Biotechnology

Archaea are a domain of prokaryotic organisms with intriguing physiological characteristics and ecological importance. In Microbial Biotechnology, archaea are historically overshadowed by bacteria and eukaryotes in terms of public awareness, industrial application, and scientific studies, although their biochemical and physiological properties show a vast potential for a wide range of biotechnological applications. Today, the majority of microbial cell factories utilized for the production of value-added and high value compounds on an industrial scale are bacterial, fungal or algae based. Nevertheless, archaea are becoming ever more relevant for biotechnology as their cultivation and genetic systems improve. Some of the main advantages of archaeal cell factories are the ability to cultivate many of these often extremophilic organisms under non-sterile conditions, and to utilize inexpensive feedstocks often toxic to other microorganisms, thus drastically reducing cultivation costs. Currently, the only commercially available products of archaeal cell factories are bacterioruberin, squalene, bacteriorhodopsin and diether-/tetraether-lipids, all of which are produced utilizing halophiles. Other archaeal products, such as carotenoids and biohydrogen, as well as polyhydroxyalkanoates and methane are in early to advanced development stages, respectively. The aim of this review is to provide an overview of the current state of Archaea Biotechnology by describing the actual state of research and development as well as the industrial utilization of archaeal cell factories, their role and their potential in the future of sustainable bioprocessing, and to illustrate their physiological and biotechnological potential.

Green Synthesis of Metallic Nanoparticles and Their Potential Applications to Treat Cancer

Nanoparticle synthesis using microorganisms and plants by green synthesis technology is biologically safe, cost-effective, and environment-friendly. Plants and microorganisms have established the power to devour and accumulate inorganic metal ions from their neighboring niche. The biological entities are known to synthesize nanoparticles both extra and intracellularly. The capability of a living system to utilize its intrinsic organic chemistry processes in remodeling inorganic metal ions into nanoparticles has opened up an undiscovered area of biochemical analysis. Nanotechnology in conjunction with biology gives rise to an advanced area of nanobiotechnology that involves living entities of both prokaryotic and eukaryotic origin, such as algae, cyanobacteria, actinomycetes, bacteria, viruses, yeasts, fungi, and plants. Every biological system varies in its capabilities to supply metallic nanoparticles. However, not all biological organisms can produce nanoparticles due to their enzymatic activities and intrinsic metabolic processes. Therefore, biological entities or their extracts are used for the green synthesis of metallic nanoparticles through bio-reduction of metallic particles leading to the synthesis of nanoparticles. These biosynthesized metallic nanoparticles have a range of unlimited pharmaceutical applications including delivery of drugs or genes, detection of pathogens or proteins, and tissue engineering. The effective delivery of drugs and tissue engineering through the use of nanotechnology exhibited vital contributions in translational research related to the pharmaceutical products and their applications. Collectively, this review covers the green synthesis of nanoparticles by using various biological systems as well as their applications.

A critical review on radioactive waste management through biological techniques

Our world is subject to various kinds of pollution and contamination due to rapid growth and development of industrialization. Though, industries are helping to improve the human life style in many ways in day to day life such as power generation to treatment of diseases. At the same time, industries emit the waste which causes major environmental pollution and leads to harmful for all living organism. As the renewable energy sources are depleting, energy/power generation become a major research around the world. Nuclear energy is one of the promising energy to sort out the energy demand, but the problem associated with the nuclear energy is the management and treatment of radioactive waste/emission/effluent since which is more dangerous to all living organism. There is a large scale contamination of radioactive waste associated for the past 60 years of global nuclear activity. It is necessary to pay special attention to the management of radioactive wastes in order to approach pollution-free environment and avoid diseases to living organism through various clean-up strategies. In this review, we discussed the wide ranges of strategies available for radioactive waste management such as physical, chemical, and biological methods. Bioremediation may be the powerful tool for treatment of radioactive wastes. Additionally, discussed on recent advancement have been made in treatment of radioactive waste through microbial transformation as well as phytoremediation which play a major role in disposal of radioactive waste.

Recycling lithium-ion batteries from electric vehicles

Rapid growth in the market for electric vehicles is imperative, to meet global targets for reducing greenhouse gas emissions, to improve air quality in urban centres and to meet the needs of consumers, with whom electric vehicles are increasingly popular. However, growing numbers of electric vehicles present a serious waste-management challenge for recyclers at end-of-life. Nevertheless, spent batteries may also present an opportunity as manufacturers require access to strategic elements and critical materials for key components in electric-vehicle manufacture: recycled lithium-ion batteries from electric vehicles could provide a valuable secondary source of materials. Here we outline and evaluate the current range of approaches to electric-vehicle lithium-ion battery recycling and re-use, and highlight areas for future progress.

S-layer protein-AuNP systems for the colorimetric detection of metal and metalloid ions in water

Bacterial surface layer proteins (S-layer) possess unique binding properties for metal ions. By combining the binding capability of S-layer proteins with the optical properties of gold nanoparticles (AuNP), namely plasmonic resonance, a colorimetric detection system for metal and metalloid ions in water was developed. Eight S-layer proteins from different bacteria species were used for the functionalization of AuNP. The thus developed biohybrid systems, AuNP functionalized with S-layer proteins, were tested with different metal salt solutions, e.g. Indium(III)-chloride, Yttrium(III)-chloride or Nickel(II)-chloride, to determine their selective and sensitive binding to ionic analytes. All tested S-layer proteins displayed unique binding affinities for the different metal ions. For each S-layer and metal ion combination markedly different reaction patterns and differences in concentration range and absorption spectra were detected by UV/vis spectroscopy. In this way, the selective detection of tested metal ions was achieved by differentiated analysis of a colorimetric screening assay of these biohybrid systems. A highly selective and sensitive detection of yttrium ions down to a concentration of 1.67 × 10^-5 mol/l was achieved with S-layer protein SslA functionalized AuNP. The presented biohybrid systems can thus be used as a sensitive and fast sensor system for metal and metalloid ions in aqueous systems.

Assessing nickel tolerance of bacteria isolated from serpentine soils

Serpentine soils present unique characteristics such as a low Ca/Mg ratio, low concentration of nutrients, and a high concentration of heavy metals, especially nickel. Soil bacterial isolates from an ultramafic complex located in the tropical savanna known as the Brazilian Cerrado were studied. Nickel-tolerant bacteria were obtained, and their ability to remove nickel from a culture medium was assessed. Bacterial isolates presented higher tolerance to nickel salts than previously reported for bacteria obtained from serpentine environments in other regions of the world. In addition, the quantification of nickel in cell pellets indicated that at least four isolates may adsorb soluble forms of nickel. It is expected that information gathered in this study will support future efforts to exploit serpentine soil bacteria for biotechnological processes involving nickel decontamination from environmental samples.

Potential use of Bacillus genera for metals removal from spent catalysts

The aim of the present study was to isolate microorganisms able to tolerate Ni²⁺ and V⁵⁺ from different sites located close to a mineral mine in Guanajuato, Mexico, and then to evaluate their ability to remove metals contained in a spent catalyst. Seventeen isolates were obtained; among them seven presented a minimum inhibitory concentration (MIC) higher than 200 mg/L of Ni²⁺ and V⁵⁺ each. Nickel and Vanadium removal was evaluated in 9 K liquid medium added with spent catalyst at 16% (s/v) pulp density and incubated at 30 °C, 150 rpm for 7 days. Only three isolates which were coded as PRGSd-MS-2, MNSH2-AH-3, and MNSS-AH-4 showed a significant removal at the end of treatment corresponding in mg kg^-1 (or percentage metal removal) of 138 (32%), 123 (29%), and 101 (24%) for Ni, respectively; and 557 (26%), 737 (34%), and 456 (21%) mg kg^-1 for V, respectively. The same isolates were capable to remove also Al, Fe, As, and Mg at different extent. Cell morphology changes were observed, in comparison to the control system at the end of biological treatment as a higher quantity of spores for MNSH2-AH-3, 2 μm cells in pairs for MNSS-AH-4, also long chain-vegetative cells having inclusions into the cell surface were observed for PRGSd-MS-2. The three isolated microorganisms were identified by sequencing of the 16S gene as Bacillus thuringiensis, Bacillus megaterium, and Bacillus sp, respectively, suggesting its potential use in the treatment of this solid industrial waste.

Proteomic and Metabolomic Profiling of Deinococcus radiodurans Recovering After Exposure to Simulated Low Earth Orbit Vacuum Conditions

The polyextremophile, gram-positive bacterium Deinococcus radiodurans can withstand harsh conditions of real and simulated outer space environment, e.g., UV and ionizing radiation. A long-term space exposure of D. radiodurans has been performed in Low Earth Orbit (LEO) in frames of the Tanpopo orbital mission aiming to investigate the possibility of interplanetary life transfer. Space vacuum (10^-4–10^-7 Pa) is a harmful factor, which induces dehydration and affects microbial integrity, severely damaging cellular components: lipids, carbohydrates, proteins, and nucleic acids. However, the molecular strategies by which microorganisms protect their integrity on molecular and cellular levels against vacuum damage are not yet understood. In a simulation experiment, we exposed dried D. radiodurans cells to vacuum (10^-4–10^-7 Pa), which resembles vacuum pressure present outside the International Space Station in LEO. After 90 days of high vacuum exposure, survival of D. radiodurans cells was 2.5-fold lower compared to control cells. To trigger molecular repair mechanisms, vacuum exposed cells of D. radiodurans were recovered in complex medium for 3 and 6 h. The combined approach of analyzing primary metabolites and proteins revealed important molecular activities during early recovery after vacuum exposure. In total, 1939 proteins covering 63% of D. radiodurans annotated protein sequences were detected. Proteases, tRNA ligases, reactive oxygen species (ROS) scavenging proteins, nucleic acid repair proteins, TCA cycle proteins, and S-layer proteins are highly abundant after vacuum exposure. The overall abundance of amino acids and TCA cycle intermediates is reduced during the recovery phase of D. radiodurans as they are needed as carbon source. Furthermore, vacuum exposure induces an upregulation of Type III histidine kinases, which trigger the expression of S-layer related proteins. Along with the highly abundant transcriptional regulator of FNR/CRP family, specific histidine kinases might be involved in the regulation of vacuum stress response. After repair processes are finished, D. radiodurans switches off the connected repair machinery and focuses on proliferation. Combined comparative analysis of alterations in the proteome and metabolome helps to identify molecular key players in the stress response of D. radiodurans, thus elucidating the mechanisms behind its extraordinary regenerative abilities and enabling this microorganism to withstand vacuum stress.

Novel Mechanism for Surface Layer Shedding and Regenerating in Bacteria Exposed to Metal-Contaminated Conditions

Surface layers (S-layers) are components of the cell walls throughout the Bacteria and the Archaea that provide protection for microorganisms against diverse environmental stresses, including metal stress. We have previously characterized the process by which S-layers serve as a nucleation site for metal mineralization in an archaeon for which the S-layer represents the only cell wall component. Here, we test the hypothesis originally proposed in cyanobacteria that a “shedding” mechanism exists for replacing S-layers that have become mineral-encrusted, using Lysinibacillus sp. TchIII 20n38, metallotolerant gram-positive bacterium, as a model organism. We characterize for the first time a mechanism for resistance to metals through S-layer shedding and regeneration. S-layers nucleate the formation of Fe-mineral on the cell surface, depending on physiological state of the cells and metal exposure times, leading to the encrustation of the S-layer and changes in the cell morphology as observed by scanning electron microscopy. Using Nanoscale Secondary Ion Mass Spectrometry, we show that mineral-encrusted S-layers are shed by the bacterial cells after a period of latency (2 days under the conditions tested) in a heterogeneous fashion likely reflecting natural variations in metal stress resistance. The emerging cells regenerate new S-layers as part of their cell wall structure. Given the wide diversity of S-layer bearing prokaryotes, S-layer shedding may represent an important mechanism for microbial survival in metal-contaminated environments.

Uranium adsorption and subsequent re-oxidation under aerobic conditions by Leifsonia sp. - Coated biochar as green trapping agent

It has generally been assumed that the immobilization of U(VI) via polyphosphate accumulating microorganisms may present a sink for uranium, but the potential mechanisms of the process and the stability of precipitated uranium under aerobic conditions remain elusive. This study seeks to explore the mechanism, capacity, and stability of uranium precipitation under aerobic conditions by a purified indigenous bacteria isolated from acidic tailings (pH 6.5) in China. The results show that over the treatment ranges investigated, maximum removal of U(VI) from aqueous solution was 99.82% when the initial concentration of U(VI) was 42 μM, pH was 3.5, and the temperature was with 30 °C much higher than that of other reported microorganisms. The adsorption mechanism was elucidated via the use of SEM-EDS, XPS and FTIR. SEM-EDS showed two peaks of uranium on the surface. A plausible explanation for this, supported by FTIR, is that uranium precipitated on the biosorbent surfaces. XPS measurements indicated that the uranium product is most likely a mixture of 13% U(VI) and 87% U(IV). Notably, the reoxidation experiment found that the uranium precipitates were stable in the presence of Ca²⁺ and Mg²⁺, however, U(IV) is oxidized to U(VI) in the presence of NO₃^- and Na⁺ ions, resulting in rapid dissolution. It implies that the synthesized Leifsonia sp. coated biochar could be utilized as a green and effective biosorbent. However, it may not a good choice for in-situ remediation due to the subsequent re-oxidation under aerobic conditions. These observations can be of some guiding significance to the application of the bioremediation technology in surface environments.

Microbial enrichment and gene functional categories revealed on the walls of a spent fuel pool of a nuclear power plant

Microorganisms developing in the liner of the spent fuel pool (SFP) and the fuel transfer channel (FTC) of a Nuclear Power Plant (NPP) can form high radiation resistant biofilms and cause corrosion. Due to difficulties and limitations to obtain large samples from SFP and FTC, cotton swabs were used to collect the biofilm from the wall of these installations. Molecular characterization was performed using massively parallel sequencing to obtain a taxonomic and functional gene classification. Also, samples from the drainage system were evaluated because microorganisms may travel over the 12-meter column of the pool water of the Brazilian Nuclear Power Plant (Angra1), which has been functioning since 1985. Regardless of the treatment of the pool water, our data reveal the unexpected presence of Fungi (Basidiomycota and Ascomycota) as the main contaminators of the SFP and FTC. Ustilaginomycetes (Basidiomycota) was the major class contributor (70%) in the SFP and FTC reflecting the little diversity in these sites; nevertheless, Proteobacteria, Actinobacteria, Firmicutes (Bacilli) were present in small proportions. Mapping total reads against six fungal reference genomes indicate that there is, in fact, a high abundance of fungal sequences in samples collected from SFP and FTC. Analysis of the ribosomal internal transcribed spacer (ITS) 1 and 2 regions and the protein found in the mitochondria of eukaryotic cells, cytochrome b (cytb) grouped our sample fungi in the clade 7 as Ustilago and Pseudozyma. In contrast, in the drainage system, Alphaproteobacteria were present in high abundances (55%). The presence of Sphingopyxis, Mesorhizobium, Erythrobacter, Sphingomonas, Novosphingobium, Sphingobium, Chelativorans, Oceanicaulis, Acidovorax, and Cyanobacteria was observed. Based on genomic annotation data, the assessment of the biological function found a higher proportion of protein-coding sequences related to respiration and protein metabolism in SFP and FTC samples. The knowledge of this biological inventory present in the system may contribute to further studies of potential microorganisms that might be useful for bioremediation of nuclear waste.

The Golden Activity of Lysinibacillus sphaericus: New Insights on Gold Accumulation and Possible Nanoparticles Biosynthesis

Power struggles surrounding the increasing economic development of gold mining give rise to severe environmental and social problems. Two new strains of Lysinibacillus sphaericus were isolated from an area of active alluvial gold mining exploitation at El Bagre, Antioquia. The absorption capacity of these strains and some of the L. sphaericus Microbiological Research Center (CIMIC) collection (CBAM5, OT4b.31, III(3)7) were evaluated by spectrophotometry according to a calibration gold curve of HAuCl₄⁻ with concentrations between 0 µg/mL and 100 µg/mL. Bioassays with living biomass were carried out with an initial gold concentration of 60 µg/mL. Their sorption capacity was evident, reaching percentages of gold removal between 25% and 85% in the first 2 h and 75% to 95% after 48 h. Biosynthesis of possible gold nanoparticles (AuNPs) in assays with living biomass was also observed. Metal sorption was evaluated using scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDS) analysis. The sorption and fabrication capacity exhibited by the evaluated strains of L. sphaericus converts this microorganism into a potential alternative for biomining processes, especially those related to gold extraction.

Responses exhibited by various microbial groups relevant to uranium exposure

There is a strong interest in knowing how various microbial systems respond to the presence of uranium (U), largely in the context of bioremediation. There is no known biological role for uranium so far. Uranium is naturally present in rocks and minerals. The insoluble nature of the U(IV) minerals keeps uranium firmly bound in the earth's crust minimizing its bioavailability. However, anthropogenic nuclear reaction processes over the last few decades have resulted in introduction of uranium into the environment in soluble and toxic forms. Microbes adsorb, accumulate, reduce, oxidize, possibly respire, mineralize and precipitate uranium. This review focuses on the microbial responses to uranium exposure which allows the alteration of the forms and concentrations of uranium within the cell and in the local environment. Detailed information on the three major bioprocesses namely, biosorption, bioprecipitation and bioreduction exhibited by the microbes belonging to various groups and subgroups of bacteria, fungi and algae is provided in this review elucidating their intrinsic and engineered abilities for uranium removal. The survey also highlights the instances of the field trials undertaken for in situ uranium bioremediation. Advances in genomics and proteomics approaches providing the information on the regulatory and physiologically important determinants in the microbes in response to uranium challenge have been catalogued here. Recent developments in metagenomics and metaproteomics indicating the ecologically relevant traits required for the adaptation and survival of environmental microbes residing in uranium contaminated sites are also included. A comprehensive understanding of the microbial responses to uranium can facilitate the development of in situ U bioremediation strategies.

Glutamic acid leaching of synthetic covellite - A model system combining experimental data and geochemical modeling

For Kupferschiefer mining established pyrometallurgical and acidic bioleaching methods face numerous problems. This is due to the finely grained and dispersed distribution of the copper minerals, the complex mineralogy, comparably low copper content, and the possibly high carbonate and organic content in this ore. Leaching at neutral pH seemed worth a try: At neutral pH the abundant carbonates do not need to be dissolved and therewith would not consume excessive amounts of provided acids. Certainly, copper solubility at neutral pH is reduced compared to an acidic environment; however, if copper complexing ligands would be supplied abundantly, copper contents in the mobile phase could easily reach the required economic level. We set up a model system to study the effect of parameters such as pH, microorganisms, microbial metabolites, and organic ligands on covellite leaching to get a better understanding of the processes in copper leaching at pH ≥ 6. With this model system we could show that glutamic acid and the microbial siderophore desferrioxamine B promote covellite dissolution. Both experimental and modeling data showed that pH is an important parameter in covellite dissolution. An increase of pH from 6 to 9 could elevate copper extraction in the presence of glutamic acid by a factor of five. These results have implications for both development of a biotechnological process regarding metal extraction from Kupferschiefer, and for the interaction of bacterial metabolites with the lithosphere and potential mobilization of heavy metals in alkaline environments.

Bio-recycling of metals: Recycling of technical products using biological applications

The increasing demand of different essential metals as a consequence of the development of new technologies, especially in the so called "low carbon technologies" require the development of innovative technologies that enable an economic and environmentally friendly metal recovery from primary and secondary resources. There is serious concern that the demand of some critical elements might exceed the present supply within a few years, thus necessitating the development of novel strategies and technologies to meet the requirements of industry and society. Besides an improvement of exploitation and processing of ores, the more urgent issue of recycling of strategic metals has to be enforced. However, current recycling rates are very low due to the increasing complexity of products and the low content of certain critical elements, thus hindering an economic metal recovery. On the other hand, increasing environmental consciousness as well as limitations of classical methods require innovative recycling methodologies in order to enable a circular economy. Modern biotechnologies can contribute to solve some of the problems related to metal recycling. These approaches use natural properties of organisms, bio-compounds, and biomolecules to interact with minerals, materials, metals, or metal ions such as surface attachment, mineral dissolution, transformation, and metal complexation. Further, modern genetic approaches, e.g. realized by synthetic biology, enable the smart design of new chemicals. The article presents some recent developments in the fields of bioleaching, biosorption, bioreduction, and bioflotation, and their use for metal recovery from different waste materials. Currently only few of these developments are commercialized. Major limitations are high costs in comparison to conventional methods and low element selectivity. The article discusses future trends to overcome these barriers. Especially interdisciplinary approaches, the combination of different technologies, the inclusion of modern genetic methods, as well as the consideration of existing, yet unexplored natural resources will push innovations in these fields.

The contribution of microbially produced nanoparticles to sustainable development goals

Nanoparticles (NPs), particles having one or more dimensions below 100 nm, are currently being synthesized through chemical and physical methods on an industrial scale. However, these methods for the synthesis of NPs do not fit with sustainable development goals. NP synthesis, through chemical and physical methods, requires high temperatures and/or pressures resulting in high energy consumption and the generation of large amounts of waste. In recent years, research into the synthesis of NPs has shifted to more green and biological methods, often using microorganisms. A biological approach has many advantages over chemical and physical methods. Reactions are catalysed in aqueous solutions at standard temperature and pressure (cost effective and low energy syntheses). This method does not require solvents or harmful chemicals, making NP biosynthesis a greener and more eco-friendly method. Furthermore, NP synthesis by microbes does not require the use of pure starting materials; thus it can simultaneously be used for the bioremediation of contaminated water, land and waste, and the biosynthesis of NPs. Therefore the biosynthesis of NPs contributes to the sustainable development goals, while the alternative physical and chemical methods exclusively utilize scarce and expensive resources for NP synthesis.

Synergistic Activity Between S-Layer Protein and Spore-Crystal Preparations from Lysinibacillus sphaericus Against Culex quinquefasciatus Larvae

Lysinibacillus sphaericus is used for the biological control of mosquitoes. The main toxicity mechanism of pathogenic strains is a binary toxin produced during sporulation. S-layer is a proteinaceous structure on the surface of bacteria; its functions have been involved in the interaction between bacterial cells and the environment, for example, as protective coats, surface recognition, and biological control. In L. sphaericus, S-layer protein (SlpC) is expressed in vegetative cells, and is also found in spore-crystal preparations; it has larvicidal activity in Culex spp. In this study, partial and completed sporulated culture toxicities were compared; also, S-layer protein and spore-crystal proteins were tested against Culex quinquefasciatus larvae for possible interactions. Larvicidal activity obtained with a combination of SlpC and spore-crystal proteins from strain III(3)7 showed no significant interaction, whereas, combinations of both preparations from strain 2362 showed synergistic effect. The highest synergistic activity observed was between spore protein complex from strain 2362 and SlpC from III(3)7. S-layer protein could be considered a good alternative in formulation improvement, for biological control of mosquitoes.

Screening of bacterial strains isolated from uranium mill tailings porewaters for bioremediation purposes

The present work characterizes at different levels a number of bacterial strains isolated from porewaters sampled in the vicinity of two French uranium tailing repositories. The 16S rRNA gene from 33 bacterial isolates, corresponding to the different morphotypes recovered, was almost fully sequenced. The resulting sequences belonged to 13 bacterial genera comprised in the phyla Firmicutes, Actinobacteria and Proteobacteria. Further characterization at physiological level and metals/metalloid tolerance provided evidences for an appropriate selection of bacterial strains potentially useful for immobilization of uranium and other common contaminants. By using High Resolution Transmission Electron Microscope (HRTEM), this potential ability to immobilize uranium as U phosphate mineral phases was confirmed for the bacterial strains Br3 and Br5 corresponding to Arthrobacter sp. and Microbacterium oxydans, respectively. Scanning Transmission Electron Microscope- High-Angle Annular Dark-Field (STEM-HAADF) analysis showed U accumulates on the surface and within bacterial cytoplasm, in addition to the extracellular space. Energy Dispersive X-ray (EDX) element-distribution maps demonstrated the presence of U and P within these accumulates. These results indicate the potential of certain bacterial strains isolated from porewaters of U mill tailings for immobilizing uranium, likely as uranium phosphates. Some of these bacterial isolates might be considered as promising candidates in the design of uranium bioremediation strategies.

Diversity in S-layers

Surface layers, referred simply as S-layers, are the two-dimensional crystalline arrays of protein or glycoprotein subunits on cell surface. They are one of the most common outermost envelope components observed in prokaryotic organisms (Archaea and Bacteria). Over the past decades, S-layers have become an issue of increasing interest due to their ubiquitousness, special features and functions. Substantial work in this field provides evidences of an enormous diversity in S-layers. This paper reviews and illustrates the diversity from several different aspects, involving the S-layer-carrying strains, the structure of S-layers, the S-layer proteins and genes, as well as the functions of S-layers.

Cloning of the cnr operon into a strain of Bacillaceae bacterium for the development of a suitable biosorbent

In this study, a potential microbial biosorbent was engineered to improve its capacity to remediate heavy metal contaminated water resources. A Bacillaceae bacterium isolated from a mining area was transformed with a plasmid carrying the (pECD312)-based cnr operon that encodes nickel and cobalt resistance. The bioadsorption ability of the transformed strain was evaluated for removal of nickel from metallurgical water relative to the wildtype strain. Results showed that transformation improved the adsorption capacity of the bacterium by 37 % at nickel concentrations equivalent to 150 mg/L. Furthermore it was possible to apply prediction modelling to study the bioadsorption behaviour of the transformed strain. As such, this work may be extended to the design of a nickel bioremediation plant utilising the newly developed Bacillaceae bacterium as a biosorbent.

Preservation of Archaeal Surface Layer Structure During Mineralization

Proteinaceous surface layers (S-layers) are highly ordered, crystalline structures commonly found in prokaryotic cell envelopes that augment their structural stability and modify interactions with metals in the environment. While mineral formation associated with S-layers has previously been noted, the mechanisms were unconstrained. Using Sulfolobus acidocaldarius a hyperthermophilic archaeon native to metal-enriched environments and possessing a cell envelope composed only of a S-layer and a lipid cell membrane, we describe a passive process of iron phosphate nucleation and growth within the S-layer of cells and cell-free S-layer "ghosts" during incubation in a Fe-rich medium, independently of metabolic activity. This process followed five steps: (1) initial formation of mineral patches associated with S-layer; (2) patch expansion; (3) patch connection; (4) formation of a continuous mineral encrusted layer at the cell surface; (5) early stages of S-layer fossilization via growth of the extracellular mineralized layer and the mineralization of cytosolic face of the cell membrane. At more advanced stages of encrustation, encrusted outer membrane vesicles are formed, likely in an attempt to remove damaged S-layer proteins. The S-layer structure remains strikingly well preserved even upon the final step of encrustation, offering potential biosignatures to be looked for in the fossil record.

Microbially-induced Carbonate Precipitation for Immobilization of Toxic Metals

Rapid urbanization and industrialization resulting from growing populations contribute to environmental pollution by toxic metals and radionuclides which pose a threat to the environment and to human health. To combat this threat, it is important to develop remediation technologies based on natural processes that are sustainable. In recent years, a biomineralization process involving ureolytic microorganisms that leads to calcium carbonate precipitation has been found to be effective in immobilizing toxic metal pollutants. The advantage of using ureolytic organisms for bioremediating metal pollution in soil is their ability to immobilize toxic metals efficiently by precipitation or coprecipitation, independent of metal valence state and toxicity and the redox potential. This review summarizes current understanding of the ability of ureolytic microorganisms for carbonate biomineralization and applications of this process for toxic metal bioremediation. Microbial metal carbonate precipitation may also be relevant to detoxification of contaminated process streams and effluents as well as the production of novel carbonate biominerals and biorecovery of metals and radionuclides that form insoluble carbonates.

Au-Interaction of Slp1 Polymers and Monolayer from Lysinibacillus sphaericus JG-B53 - QCM-D, ICP-MS and AFM as Tools for Biomolecule-metal Studies

In this publication the gold sorption behavior of surface layer (S-layer) proteins (Slp1) of Lysinibacillus sphaericus JG-B53 is described. These biomolecules arrange in paracrystalline two-dimensional arrays on surfaces, bind metals, and are thus interesting for several biotechnical applications, such as biosorptive materials for the removal or recovery of different elements from the environment and industrial processes. The deposition of Au(0) nanoparticles on S-layers, either by S-layer directed synthesis or adsorption of nanoparticles, opens new possibilities for diverse sensory applications. Although numerous studies have described the biosorptive properties of S-layers, a deeper understanding of protein-protein and protein-metal interaction still remains challenging. In the following study, inductively coupled mass spectrometry (ICP-MS) was used for the detection of metal sorption by suspended S-layers. This was correlated to measurements of quartz crystal microbalance with dissipation monitoring (QCM-D), which allows the online detection of proteinaceous monolayer formation and metal deposition, and thus, a more detailed understanding on metal binding. The ICP-MS results indicated that the binding of Au(III) to the suspended S-layer polymers is pH dependent. The maximum binding of Au(III) was obtained at pH 4.0. The QCM-D investigations enabled the detection of Au(III) sorption as well as the deposition of Au(0)-NPs in real-time during the in situ experiments. Further, this method allowed studying the influence of metal binding on the protein lattice stability of Slp1. Structural properties and protein layer stability could be visualized directly after QCM-D experiment using atomic force microscopy (AFM). In conclusion, the combination of these different methods provides a deeper understanding of metal binding by bacterial S-layer proteins in suspension or as monolayers on either bacterial cells or recrystallized surfaces.

S-Layer-Based Nanocomposites for Industrial Applications

This chapter covers the fundamental aspects of bacterial S-layers: what are S-layers, what is known about them, and what are their main features that makes them so interesting for the production of nanostructures. After a detailed introduction of the paracrystalline protein lattices formed by S-layer systems in nature the chapter explores the engineering of S-layer-based materials. How can S-layers be used to produce "industry-ready" nanoscale bio-composite materials, and which kinds of nanomaterials are possible (e.g., nanoparticle synthesis, nanoparticle immobilization, and multifunctional coatings)? What are the advantages and disadvantages of S-layer-based composite materials? Finally, the chapter highlights the potential of these innovative bacterial biomolecules for future technologies in the fields of metal filtration, catalysis, and bio-functionalization.

Application of urea-agarose gel electrophoresis to select non-redundant 16S rRNAs for taxonomic studies: palladium(II) removal bacteria

The 16S ribosomal RNA (rRNA) gene has been the most commonly used sequence to characterize bacterial communities. The classical approach to obtain gene sequences to study bacterial diversity implies cloning amplicons, selecting clones, and Sanger sequencing cloned fragments. A more recent approach is direct sequencing of millions of genes using massive parallel technologies, allowing a large-scale biodiversity analysis of many samples simultaneously. However, currently, this technique is still expensive when applied to few samples; therefore, the classical approach is still used. Recently, we found a community able to remove 50 mg/L Pd(II). In this work, aiming to identify the bacteria potentially involved in Pd(II) removal, the separation of urea/heat-denatured DNA fragments by urea-agarose gel electrophoresis was applied for the first time to select 16S rRNA-cloned amplicons for taxonomic studies. The major raise in the percentage of bacteria belonging to genus Clostridium sensu stricto from undetected to 21 and 41 %, respectively, for cultures without, with 5 and 50 mg/L Pd(II) accompanying Pd(II) removal point to this taxa as a potential key agent for the bio-recovery of this metal. Despite sulfate-reducing bacteria were not detected, the hypothesis of Pd(II) removal by activity of these bacteria cannot be ruled out because a slight decrease of sulfate concentration of the medium was verified and the formation of PbS precipitates seems to occur. This work also contributes with knowledge about suitable partial 16S rRNA gene regions for taxonomic studies and shows that unidirectional sequencing is enough when Sanger sequencing cloned 16S rRNA genes for taxonomic studies to genus level.