Trace metal speciation and bioavailability in anaerobic digestion: A review

Porous hollow microspheres based on industrial solid waste enhance biomethane recovery from corn straw

The increasing production of industrial solid waste requires better disposal solutions. Porous hollow microspheres (PHM) are small inorganic materials with high surface area and adsorption capacity, but their potential for use in anaerobic digestion (AD) has not been explored. With PHM as additive, the effects of different industrial solid wastes (waste glass, steel slag, and fly ash) with different loadings (2 %-8 %), respectively, on the AD of corn straw were investigated in this study. The results showed that PHM could supplement trace elements and promote biofilm formation, which effectively shortened the lag period (25.00-60.87 %) and increased the methane yield (4.75 %-16.28 %). The 2 % PHM loading based on steel slag gave the highest methane yield (300.16 NmL/g VSadd). Microbial and PICRUSt2 analyses indicated that PHM enriched hydrolytic and acidogenic bacteria, increased the abundance of methanogenesis-related enzyme genes. This study provides a theoretical basis for the comprehensive utilization of coupled industrial and agricultural wastes.

Model based analysis of trace metal dosing strategies to improve methane yield in anaerobic digestion systems

Favourable effects of trace metals (TMs) on regulating anaerobic digestion (AD) performance are extensively utilised to improve methane yield. This study discusses a model-based approach to find out the best TM dosing strategies. The model has been applied to compare continuous, preloading, pulse dosing and in-situ loading. Simulations were also carried out to comprehend appropriate dosing form, dosing time and quantity of metals to be dosed. Model results show that the best way to dose TMs is repeated pulse dosing at low concentration levels in the optimum range with high frequency. Best dosing strategy for the system in this study was found to be 5 µM pulse loading at 5 days intervals as it gave maximum methane production and low effluent metal loss. Preferable dosing form depends on reactor configuration and this has been verified after model calibration with experimental data. Easily dissociable metal chlorides are ideal for continuous reactors.

Influential factors in anaerobic digestion of rice-derived food waste and animal manure: A comprehensive review

Utilization of organic community wastes towards deriving sustainable renewable energy and adequate disposal of the residual has been an important topic of investigation. Anaerobic digestion and co-digestion of rice-derived food waste and animal manure for sustainable biogas generation is crucial from the view-point of community consumption. This paper presents an extensive review of the important and recent contributions in the related areas. The critical physico-chemical parameters involved in such digestion process are analyzed, including temperature, carbon-nitrogen ratio, microorganisms, pH, substrate characteristics, organic loading rate, hydraulic retention time, volatile fatty acids, ammonia, and light/heavy metal ions. Studies implied that the optimum yield of biogas production could be achieved only when the values of the parameters exist in the specific ranges. Few recent studies highlighted the use of emerging techniques including micro-aerobic system, additives, laser radiation, bio-electrochemical field, among others for efficiency enhancement of the digestion process and optimum yield. The entire study provided a set of important conclusions and future research directives are as well proposed.

Evolution of Cu and Zn speciation in agricultural soil amended by digested sludge over time and repeated crop growth

Metals such as Zn and Cu present in sewage sludge applied to agricultural land can accumulate in soils and potentially mobilise into crops. Sequential extractions and X-ray absorption spectroscopy results are presented that show the speciation changes of Cu and Zn sorbed to anaerobic digestion sludge after mixing with soils over three consecutive 6-week cropping cycles, with and without spring barley (Hordeum vulgare). Cu and Zn in digested sewage sludge are primarily in metal sulphide phases formed during anaerobic digestion. When Cu and Zn spiked sludge was mixed with the soil, about 40% of Cu(I)-S phases and all Zn(II)-S phases in the amended sludge were converted to other phases (mainly Cu(I)-O and outer sphere Zn(II)-O phases). Further transformations occurred over time, and with crop growth. After 18 weeks of crop growth, about 60% of Cu added as Cu(I)-S phases was converted to other phases, with an increase in organo-Cu(II) phases. As a result, Cu and Zn extractability in the sludge-amended soil decreased with time and crop growth. Over 18 weeks, the proportions of Cu and Zn in the exchangeable fraction decreased from 36% and 70%, respectively, in freshly amended soil, to 28% and 59% without crop growth, and to 24% and 53% with crop growth. Overall, while sewage sludge application to land will probably increase the overall metal concentrations, metal bioavailability tends to reduce over time. Therefore, safety assessments for sludge application in agriculture should be based on both metal concentrations present and their specific binding strength within the amended soil.

Biohythane production via anaerobic digestion process: fundamentals, scale-up challenges, and techno-economic and environmental aspects

Biohythane, a balanced mixture comprising bioH2 (biohydrogen) and bioCH4 (biomethane) produced through anaerobic digestion, is gaining recognition as a promising energy source for the future. This article provides a comprehensive overview of biohythane production, covering production mechanisms, microbial diversity, and process parameters. It also explores different feedstock options, bioreactor designs, and scalability challenges, along with techno-economic and environmental assessments. Additionally, the article discusses the integration of biohythane into waste management systems and examines future prospects for enhancing production efficiency and applicability. This review serves as a valuable resource for researchers, engineers, and policymakers interested in advancing biohythane production as a sustainable and renewable energy solution.

Potential availability of metals in anaerobic mono- and co-digestion of pig manure and maize

This study aims to analyse the potential availability of essential metals including as Co, Fe, Ni, Zn, Mn, and Cu and non-essential metals such as Pb, Cr, and Cd within anaerobic mono- and co-digestion of pig manure and maize. The metals partitioning was determined using the Modified BCR (European Community Bureau of Reference) sequential extraction at defined intervals over a 45-days period, correlating changes in metals speciation with key digestion variables. The findings revealed that Cr, Cu, Fe, and Pb were predominantly associated with the oxidisable fraction, while Zn, Mn, and Cd were potentially available in both processes. Notably, NH4+-N and the VFAs, except propionic acid, correlated significantly with the available fractions of Co, Mn, Ni, Zn, Cr, and Pb during mono-digestion of pig manure. The wider pH range and the chemical properties of the feedstock in co-digestion resulted in varied correlations between the metals availability and the digestion variables.

Abiotic and biotic roles of metals in the anaerobic digestion of sewage sludge: A review

Anaerobic digestion (AD) is a promising technique for sludge treatment and resource recovery. Metals are very important components of sludge and can have substantial effects on its complex nature and microbial activity. However, systematic reviews have not addressed how metals in sludge affect AD and how they can be regulated to improve AD. This paper comprehensively reviews the effects of metals on the AD of sludge from both abiotic and biotic perspectives. First, we introduce the contents and basic characteristics (e.g., chemical forms) of intrinsic metals in sewage sludge. Then, we summarise the main mechanism by which metals influence sludge properties and the methods for removing metals and thus improving AD. Next, we analyze the effects of both intrinsic and exogenous metals on the enzymes and microbial communities involved in anaerobic bioconversion, focusing on the types, critical concentrations and valence states of the metals. Finally, we propose ideas for future research on the roles of metals in the AD of sludge. In summary, this review systematically clarifies the roles of metals in the AD of sludge and provides a reference for improving AD by regulating these metals.

Mechanistic insights into synergistic facilitation of copper/zinc ions and dewatered swine manure-derived biochar on anaerobic digestion of swine wastewater

Biochar-assisted anaerobic digestion (AD) has been proposed an advanced system for swine wastewater (SW) management. However, the effects of metallic nutrients in SW, such as copper/zinc ions (Cu2+/Zn2+), on the biochar-assisted AD of SW are not well understood. This study investigated the influences of individual Cu2+/Zn2+ or dewatered swine manure-derived biochar, as well as their combined additions, on the AD of SW. The results showed that exposure to 50 mg/L Cu2+/Zn2+ temporary inhibited methane production, but the addition of 20 g/L biochar alleviated this inhibition by shortening the methanogenic lag time and increasing methane yield. Following a period of acclimation, both Cu2+/Zn2+ and biochar promoted methane production, although metagenomic analysis revealed distinct mechanisms underlying their promotion. Cu2+/Zn2+ enhanced ATP processing, including electron exchange between NADH/NAD+ and succinate/fumarate transformation, by 26.0-35.8%. Additionally, the gene encoding Coenzyme M methylation was upregulated by 36.2% along with enrichments of Methanocullus and Methanosarcina, contributing to accelerated hydrolysis and methanogenesis rates by 54.7% and 44.8%, respectively. On the other hand, biochar mainly stimulated bacterial F-type ATPase activities by 28.4%, likely facilitating direct interspecies electron transfer between Geobacter and Methanosarcina for syntrophic methanogenesis. The combined addition of Cu2+/Zn2+ and biochar resulted in "win-win" benefits, significantly increasing the maximum methane production rate from 40.3 mL CH4/d to 53.7 mL CH4/d. Moreover, the introduction of biochar into AD of SW facilitated the transformation of more Cu2+/Zn2+ from a reducible Fe-Mn oxides form to a residual form, which potentially reduced the metallic toxicity of the digestate for soil amendment. The findings of this study provide novel insights into understanding the synergistic impacts of heavy metals and biochar in regulating SW during AD, as well as the management of associated digestate.

Optimization of cobalt, nickel, and iron supplement for mesophilic and thermophilic anaerobic digestion treating high-solid food waste

ABSTRACTThe effects of trace metals (iron (Fe), cobalt (Co) + Fe, and Co + nickel (Ni) + Fe) on mesophilic and thermophilic anaerobic digestion of food waste were quantified experimentally. Supplementation with 0 ≤ [Co] ≤ 5 mg/L, 0 ≤ [Ni] ≤ 10 mg/L, or 0 ≤ [Fe] ≤ 200 mg/L can significantly improve the productivity of mesophilic (MD) and thermophilic (TD) digesters. Addition of micronutrients increased biogas production, but excessive addition of trace metals hindered the production. Supplementation with Fe + Co or Fe + Co + Ni increased biogas production more than the addition of only Fe did. Within the design boundaries, the optimal concentrations for supplementation with three trace metals in MD were [Co] = 0.33 mg/L, [Ni] = 0.43 mg/L, and [Fe] = 5.35 mg/L, and in TD were [Co] = 1.41 mg/L, [Ni] = 3.84 mg/L, and [Fe] = 200 mg/L. TD required larger amounts of the trace metals than MD (4.3-37.4 times). The results can give quantitative information on trace metal supplementation for successful anaerobic digestion.

Trace elements' deficiency in energy production through methanogenesis process: Focus on the characteristics of organic solid wastes

Excessive or insufficient supplementation of trace elements (TEs) limits the progression of anaerobic digestion. The main reason for this is the lack of sufficient understanding of digestion substrate characteristics, which significantly affects the demand for TEs. In this review, the relationship between TEs requirements and substrate characteristics is discussed. We mainly focus on three aspects. 1) The basis for TE optimization and existing problems: The optimization of TEs often based on the total solids (TS) or volatile solids (VS) of substrates, does not fully consider substrate characteristics. 2) TE deficiency mechanisms for different types of substrates: nitrogen-rich, sulfur-rich, TE-poor, and easily hydrolyzed substrates are the four main types of substrates. The mechanisms underlying TEs deficiency in the different substrates are investigated. 3) Regulation of TE bioavailability: characteristics of substrates affect digestion parameters, which disturb the bioavailability TE. Therefore, methods for regulating bioavailability of TEs are discussed.

Application and improvement methods of sludge alkaline fermentation liquid as a carbon source for biological nutrient removal: A review

Alkaline fermentation can reduce the amount of waste activated sludge and prepare sludge alkaline fermentation liquid (SAFL) rich in short-chain fatty acids (SCFAs), which can be used as a high-quality carbon source for the biological nutrient removal (BNR) process. This review compiles the production method of SAFL and the progress of its application as a BNR carbon source. Compared with traditional carbon sources, SAFL has the advantages of higher efficiency and economy, and different operating conditions can influence the yield and structure of SCFAs in SAFL. SAFL can significantly improve the nutrient removal efficiency of the BNR process. Taking SAFL as the internal carbon source of BNR can simultaneously solve the problem of carbon source shortage and sludge treatment difficulties in wastewater treatment plants, and further reduce the operating cost. However, the alkaline fermentation process results in many refractory organics, ammonia and phosphate in SAFL, which reduces the availability of SAFL as a carbon source. Purifying SCFAs by removing nitrogen and phosphorus, directly extracting SCFAs, or increasing the amount of SCFAs in SAFL by co-fermentation or combining with other pretreatment methods, etc., are effective measures to improve the availability of SAFL.

Emerging Strategies for Enhancing Propionate Conversion in Anaerobic Digestion: A Review

Anaerobic digestion (AD) is a triple-benefit biotechnology for organic waste treatment, renewable production, and carbon emission reduction. In the process of anaerobic digestion, pH, temperature, organic load, ammonia nitrogen, VFAs, and other factors affect fermentation efficiency and stability. The balance between the generation and consumption of volatile fatty acids (VFAs) in the anaerobic digestion process is the key to stable AD operation. However, the accumulation of VFAs frequently occurs, especially propionate, because its oxidation has the highest Gibbs free energy when compared to other VFAs. In order to solve this problem, some strategies, including buffering addition, suspension of feeding, decreased organic loading rate, and so on, have been proposed. Emerging methods, such as bioaugmentation, supplementary trace elements, the addition of electronic receptors, conductive materials, and the degasification of dissolved hydrogen, have been recently researched, presenting promising results. But the efficacy of these methods still requires further studies and tests regarding full-scale application. The main objective of this paper is to provide a comprehensive review of the mechanisms of propionate generation, the metabolic pathways and the influencing factors during the AD process, and the recent literature regarding the experimental research related to the efficacy of various strategies for enhancing propionate biodegradation. In addition, the issues that must be addressed in the future and the focus of future research are identified, and the potential directions for future development are predicted.

Improved methane production of two-phase anaerobic digestion by cobalt: efficiency and mechanism

Two-phase anaerobic digestion (AD) is a promising technology, but its performance is sensitive to methanogen. In this study, the effect of cobalt (Co) on two-phase AD was investigated and the enhanced mechanism was revealed. Though no obvious effect of Co²⁺ was observed in acidogenic phase, the activity of methanogens was significantly affected by Co²⁺ with an optimal Co²⁺ concentration of 2.0 mg/L. Ethylenediamine-N'-disuccinic acid (EDDS) was the most effective for improving Co bioavailability and increasing methane production. The role of Co-EDDS in improving methanogenic phase was also verified by operating three reactors for two months. The Co-EDDS supplement increased the level of Vitamin B12 (VB₁₂) and coenzyme F₄₂₀, and enriched Methanofollis and Methanosarcina, thereby successfully improving methane production and accelerating reactor recovery from ammonium and acid wastewater treatment. This study provides a promising approach to improve the efficiency and stability of anaerobic digester.

Variability of Micro- and Macro-Elements in Anaerobic Co-Digestion of Municipal Sewage Sludge and Food Industrial By-Products

The main aim of this study was to evaluate the effect of the addition of selected industrial food wastes on the fate of micro- and macro-elements within an anaerobic digestion process (AD), as well as define the relationship between their content and AD efficiency. Orange peels, (OP), orange pulp (PL) and brewery spent grain (BSG) were used as co-substrates, while municipal sewage sludge (SS) was applied as the main component. The introduction of co-substrates resulted in improvements in feedstock composition in terms of macro-elements, with a simultaneous decrease in the content of HMs (heavy metals). Such beneficial effects led to enhanced methane production, and improved process performance at the highest doses of PL and BSG. In turn, reduced biogas and methane production was found in the three-component digestion mixtures in the presence of OP and BSG; therein, the highest accumulation of most HMs within the process was also revealed. Considering the agricultural application of all digestates, exceedances for Cu, Zn and Hg were recorded, thereby excluding their further use for that purpose.

Methanogenic treatment of dairy wastewater: A review of current obstacles and new technological perspectives

Methanogenic treatment can effectively manage wastewater in the dairy industry. However, its treatment efficiency and stability are problematic due to the feature of wastewater. This review comprehensively summarizes the dairy wastewater characteristics and reveals the mechanisms and impacts of three critical issues in anaerobic treatment, including ammonia and long-chain fatty acid (LCFA) inhibition and trace metal (TM) deficiency. It evaluates current remedial strategies and the implementation of anaerobic membrane bioreactor (AnMBR) technology. It assesses the use of nitrogen-removed effluent return to dilute the influent for solving protein-rich dairy wastewater treatment. It explores the methodology of TM addition to dairy wastewater in accordance with microbial TM content and proliferation. It analyzes the multiple benefits of applying high-solid AnMBR to lipid-rich influent to mitigate LCFA inhibition. Finally, it proposes a promising low-carbon treatment system with enhanced bioenergy recovery, nitrogen removal, and simultaneous phosphorus recovery that could promote carbon neutrality for dairy industry wastewater treatment.

Effects of bamboo-charcoal modified by bimetallic Fe/Pd nanoparticles on n-hexane biodegradation by bacteria Pseudomonas mendocina NX-1

The high hydrophobicity of n-hexane is the main reason why it is difficult to be removed biologically. In this study, the effects of bamboo-charcoal modified by bimetallic Fe/Pd (BBC) on n-hexane biodegradation by Pseudomonas mendocina NX-1 (PM) was investigated. The n-hexane removal efficiency was increased in the presence of BC. The highest n-hexane removal efficiency at 90.0% was achieved at 0.05 g L^-1 BCE and 3 g L^-1 NH₄⁺ under pH 7.7 and 35 °C. Additionally, protein content (45.9 μg mL^-1) and negative cell surface zeta potential (-26.4 mV) were increased during biodegradation process, with PM-BBC being 43.1 μg mL^-1 and 19.1 mV. Bacterial growth was improved and maximum cell surface hydrophobicity was obtained after 20 h, which was 59.4% higher than the control with PM-BBC (37.7%) or PM (16.1%), showing biodegradation products of 1-butanol and acetic acid. The results indicate that BBC improved n-hexane biodegradation efficiency by promoting bacterial growth, reducing cell zeta potential, exposing hydrophobic proteins, and increasing cell surface hydrophobicity of bacterial strain NX-1. This investigation suggests that BBC-enhanced biodegradation can be promising to treat n-hexane-containing gas.

Impacts of metal stress on extracellular microbial products, and potential for selective metal recovery

Harnessing microbial capabilities for metal recovery from secondary waste sources is an eco-friendly and sustainable approach for the management of metal-containing wastes. Soluble microbial products (SMP) and extracellular polymeric substances (EPS) are the two main groups of extracellular compounds produced by microorganisms in response to metal stress that are of great importance for remediation and recovery of metals. These include various high-, and low, molecular weight components, which serve various functional and structural roles. These compounds often contain functional groups with metal binding potential that can attenuate metal stress by sequestering metal ions, making them less bioavailable. Microorganisms can regulate the content and composition of EPS and SMP in response to metal stress in order to increase the compounds specificity and capacity for metal binding. Thus, EPS and SMP represent ideal candidates for developing technologies for selective metal recovery from complex wastes. To discover highly metal-sorptive compounds with specific metal binding affinity for metal recovery applications, it is necessary to investigate the metal binding affinity of these compounds, especially under metal stressed conditions. In this review we critically reviewed microbial EPS and SMP production as a response to metal stress with a particular emphasis on the metal binding properties of these compounds and their role in altering metal bioavailability. Furthermore, for the first time, we compiled the available data on potential application of these compounds for selective metal recovery from waste streams.

Effect of amendments on bioavailability of cadmium in soil-rice system: a field experiment study

The field experiment study investigated the effect of lime (L), manure compost (M), combination of lime and manure (LM), and combinations of lime with four kinds of passivators (LP1, LP2, LP3, and LP4) on the bioavailability of cadmium (Cd) in soil and Cd accumulation in rice plants. These four passivating products were composed of organic and inorganic compounds such as silicon-sulfhydryl group, CaO, SiO₂, and so on. The results indicated that the application of these amendments improved soil pH, organic matter content, and cation exchange capacity (CEC) by 0.19-0.73 unit, 0.6-8.2%, and 5.7-38.9%, respectively; meanwhile, decreased soil acid-extractable Cd by 4.0-13.9% compared with before remediation. Alleviating Cd stress to rice also resulted in a significant increase in rice grains yield, whereas the LP4 showed an increment of 15.8-27.6%. Among these amendments, LP4 had a relatively high effectiveness, it promoted the decrease of extractable Cd by 13.9% and the increase of residual Cd by 8.1%; meanwhile, the bioconcentration factor of rice grain in LP4 decreased by 71.3%. The high pH, CEC, and rich functional groups in amendments might cause soil Cd transform from mobile fraction to residual fraction, and the cation ions in amendments also competed with Cd ions due to the antagonism. Taken all of these effects, the amendments alleviated Cd pollution in soil-rice system, decreasing Cd migration from soil to grain. In future, the long-term field experiment will need to be done for verify the long-term effect of soil amendments.

Zero-valent iron is not always effective in enhancing anaerobic digestion performance

Liquid nitrogen was employed as a low-temperature medium to activate zero-valent iron (ZVI) powder in an attempt to strengthen its enhancement effect on anaerobic digestion (AD) of swine manure (SM). Surprisingly, it was found that both pristine ZVI and liquid nitrogen-pretreated ZVI (LZVI) did not significantly improve the AD performance or change the archaeal community structure. It was hypothesized that ZVI might not be effective at stress-free environment like in these digesters. To confirm this, an additional set of AD experiments were performed at high ammonia stress (about 4000 mg/L), results showed that ZVI and LZVI greatly alleviated ammonia inhibition and increased the CH₄ yield by 11.6% and 28.2%, respectively. Apparently, ZVI mainly affected AD systems by changing the metabolism pathways and enhancing the microbial activity to overcome process inhibition, and pretreatment of liquid nitrogen could significantly accelerate the dissolution of ZVI and improve its utilization efficiency, contributing to a greater extend of process recovery and improvement.

Elucidating the Role of Biofilm-Forming Microbial Communities in Fermentative Biohydrogen Process: An Overview

Amongst the biofuels described in the literature, biohydrogen has gained heightened attention over the past decade due to its remarkable properties. Biohydrogen is a renewable form of H2 that can be produced under ambient conditions and at a low cost from biomass residues. Innovative approaches are continuously being applied to overcome the low process yields and pave the way for its scalability. Since the process primarily depends on the biohydrogen-producing bacteria, there is a need to acquire in-depth knowledge about the ecology of the various assemblages participating in the process, establishing effective bioaugmentation methods. This work provides an overview of the biofilm-forming communities during H2 production by mixed cultures and the synergistic associations established by certain species during H2 production. The strategies that enhance the growth of biofilms within the H2 reactors are also discussed. A short section is also included, explaining techniques used for examining and studying these biofilm structures. The work concludes with some suggestions that could lead to breakthroughs in this area of research.

Nationwide review of heavy metals in municipal sludge wastewater treatment plants in China: Sources, composition, accumulation and risk assessment

Systematically analyzing the problem of heavy metals in the municipal sludge, a meta-analysis of nine metals was undertaken to distinguish the sources and sinks of those with the impact of their accumulation on the environment. Municipal sludge was rich in N, P and K nutrients, was found to contain heavy metals comprising the descending order Zn > Mn > Cu > Cr > Pb > Ni > As > Cd > Hg. The forms, in which heavy metals accumulated in geographical regions, were characterized. The geographical distribution of heavy metals in the sludge showed a significant difference, with higher accumulation in Eastern and Southern regions, however, the risk evaluations showed the higher risk of heavy metals accumulation in Eastern and Western regions. Agricultural, industrial and traffic activities, and storm water pipeline sediments were identified as the main sources of heavy metals in the sludge. The correlation analysis elucidated the role of the total organic carbon in the accumulation of heavy metals in sludge. Municipal sludge is endowed with resource properties due to the detection of heavy metal contents thresholds in household products and its own resource-attributable enrichment behavior, which requires deduction of environmental risks.

Characterization of trace metal impact on organic acid metabolism and functional microbial community in treating dairy processing wastewater with thermophilic anaerobic membrane bioreactor

The anaerobic digestion (AD) of dairy processing wastewater (DPW) to produce bioenergy is considered promising but also associated with the possibility of an unbalanced organic matter and trace metal (TM) content. In this study, the TM content and its impact on AD were determined in an anaerobic membrane bioreactor operated to treat DPW. The results indicated that a deficiency in TMs resulted in the slow deterioration of the process, reducing biogas production, disrupting the buffer system, and the massive accumulation of organic acid. The deficiency of Co/Ni was significant, while iron fluctuated due to microbial and chemical effects. Syntrophic propionate oxidizing bacteria and methanogen were the main groups suppressed under the TM deficient environment, resulting in AD failure. No inhibitory effect on the lactic acid metabolism was observed. Hence, supplying theoretical TM dosage to DPW was necessary to realize the efficient and stable AD process and robust microbial community.

Methodological framework for wastewater treatment plants delivering expanded service: Economic tradeoffs and technological decisions

With emerging decarbonization to deploy more integrated waste management, there is a burgeoning need for re-managing waste-related infrastructures in urban environments. Wastewater treatment plants are key contributors to expanded environmental services, but relevant technological decisions and economic tradeoffs have to be assessed from a systems perspective. This study provides a methodological framework that consolidates the multiple technological and economic aspects of system retrofitting for such an evaluation purpose. Complex leachate from refuse transfer stations has been recently identified as the decarbonization roadblock of urban waste management, and it was chosen for investigations by this new methodological approach. The system impacts by complex leachate on the existing facilities were validated by experimental trials. To derive the financial outlooks for decision making, the evaluation matrix includes the quantitative impacts of bioenergy profiles, energy balance analysis of biogas utilization methods, needs of system retrofitting, economic factors, and their uncertainties. Due to the detected inefficiency of bioenergy recovery, bioinformatic analysis was proceeded for understanding the underlying mechanism to propose a mitigation solution. Overall, the methodological framework can provide a quantitative assessment of the centralized capability of wastewater treatment plants for systems planning in the new policy agenda of urban decarbonization, where the methodological potentials of expanded framework applications are also highlighted.

A critical review of process parameters influencing the fate of antibiotic resistance genes in the anaerobic digestion of organic waste

The overuse and inappropriate disposal of antibiotics raised severe public health risks worldwide. Specifically, the incomplete antibiotics metabolism in human and animal bodies contributes to the significant release of antibiotics into the natural ecosystems and the proliferation of antibiotic-resistant bacteria carrying antibiotic-resistant genes. Moreover, the organic feedstocks used for anaerobic digestion are often highly-rich in residual antibiotics and antibiotic-resistant genes. Hence, understanding their fate during anaerobic digestion has become a significant research focus recently. Previous studies demonstrated that various process parameters could considerably influence the propagation of the antibiotic-resistant genes during anaerobic digestion and their transmission via land application of digestate. This review article scrutinizes the influences of process parameters on antibiotic-resistant genes propagation in anaerobic digestion and the inherent fundamentals behind their effects. Based on the literature review, critical research gaps and challenges are summarized to guide the prospects for future studies.

Biomethane production from waste activated sludge promoted by sludge incineration bottom ash: The distinctive role of metal cations and inert fractions

Sludge incineration bottom ash (SA), a solid waste generated by incineration of waste activated sludge (WAS), has been demonstrated as an inexpensive additive to increase biomethane production from anaerobic digestion (AD) of WAS. However, how SA improved methanogenic performance of a WAS digester remains elusive. Here, we addressed this question by fractionating the SA into accessible leachate (SA-L) and inert residue (SA-R) and investigating their individual effects. The cumulative biomethane production was increased by 6.7%, 20.2% and 39.6% with addition of SA-L, SA-R and SA, respectively. Mechanistic study showed that release of organic-binding metals (Ca and Fe) from SA dissolution suppressed volatile fatty acids production by increasing the apparent activation energy (AAE) and decreasing the surface binding sites for hydrolytic/acidogenic enzymes during WAS hydrolysis-acidogenesis, while trace elements in SA-L promoted metabolism of methanogens (Methanothermobacter and Methanosarcina). In contrast, the gypsum/silicate-cored SA-R facilitated hydrolysis-acidogenesis with reduced AAE but drastically inhibited methanogenesis due to competition of sulfate-reducing bacteria Thermodesulfovibrio. The comparative analysis of KEGG-based functional genes indicated that the enhanced methane metabolism and reductive CO₂ fixation pathways with SA addition could result from the release of trace elements to support key enzyme activities.

Impact of substrate digestibility on microbial community stability in methanogenic digestors: The mechanism and solution

This study investigated the temporal dynamics of digestion efficiency and community stability in digesters fed with waste activated sludge (WAS), straw (STR-AD), food waste (FW-AD) and mixture of straw-and-food waste (STR-FW-AD). Results showed that carbon removals of recalcitrant substrates (i.e., 48.2 ± 3.9% in WAS-AD and 57.8 ± 4.9% in STR-AD) were lower than that of labile substrates (i.e., 70.7 ± 4.0% in FW-AD). Nonetheless, carbon removal of recalcitrant substrates was largely improved through co-digestion (70.3 ± 3.2% in STR-FW-AD). In contrast to monopoly communities (e.g., the highly enriched Paludibacter) fed with the labile substrates, recalcitrant substrates supported highly diverse communities. Accordingly, the medians of negative/positive cohesions of communities in WAS-AD, STR-AD, STR-FW-AD and FW-AD decreased from 0.86 to 0.63, suggesting their decreasing community stability. Microbial source tracking analyses showed the major contribution of the STR-AD community to the co-digestion community. This study provided unprecedented mechanistic insight into stability improvement of substrate co-digestion on the methanogenic digestion microbiome.

Comparison of cobalt ferrate-based nanoparticles for promoting biomethane evolution from lactic acid anaerobic digestion

Some inhibition of biomethane (bioCH₄) production system can be observed, which is due to the propionic acid generation from lactic acid degradation. In this work, the three cobalt ferrate-based nanoparticles (NPs) such as CoFe₂O₄, CoAl_0.2Fe_1.8O₄ and CoCu_0.2Fe_1.8O₄ were synthesized to promote the bioCH₄ evolution from lactic acid. The CH₄ yields from the CoAl_0.2Fe_1.8O₄, CoCu_0.2Fe_1.8O₄ and CoFe₂O₄ groups at 300 mg/L of NPs were 431.52, 392.12 and 396.6 mL/g lactic acid, respectively. Moreover, the highest CH₄ yield was 34.15% higher than that of the control reactor (321.67 mL/g lactic acid) without NPs. The three NPs accelerated lactic acid biodegradation and propionic acid conversion, thus obtaining more CH₄. Surprisingly, microbial structure revealed that CoAl_0.2Fe_1.8O₄ increased the abundance of Bacteroidetes_vadinHA17 to 16.6%, promoting the conversion from propionic acid to acetic acid. Meanwhile, the abundance of Methanobacterium in archaeal community from CoAl_0.2Fe_1.8O₄ group rose from 45.81% to 68.45%, which facilitated bioCH₄ production.

Corncob ash boosts fermentative hydrogen production from waste activated sludge

With the increasing demand for sustainable development, the recycling and utilization of wastes has received widespread attention. This study proposed a green method of using one waste, corncob ash, to boost microbial the production of hydrogen from another waste, waste activated sludge, during anaerobic fermentation. The corncob ash dosage and the fermentative hydrogen production was positively correlated, and the maximum production of hydrogen reached up to 46.8 ± 1.0 mL/g VS, which was about 3.5 times that of the control group without corncob ash dosage (17.0 ± 0.9 mL/g VS). Mechanistic studies found that corncob ash was beneficial to the solubilization, hydrolysis and acetogenesis processes involved in fermentative hydrogen production process. The microbial community analysis indicated that corncob ash enriched more hydrolytic microorganisms (e.g., Bacteroides sp. and Leptolinea sp.), and has less impact on acidifying microorganisms, compared to the control group. The strategy of using corncob ash to boost the production of hydrogen during anaerobic waste activated sludge fermentation proposed in this study might provide a new waste-control-waste paradigm, making sludge disposal and wastewater treatment more sustainable.

Effects of co-digestion of food waste, corn straw and chicken manure in two-stage anaerobic digestion on trace element bioavailability and microbial community composition

Co-digestion is known to effectively alleviate trace elements (TEs) deficiency in mono-substrates; however, the bioavailability of TEs is crucial for the stability of anaerobic digestion. Therefore, this study investigated the effects of co-digestion of food waste (FW), corn straw (CS) and chicken manure (CM) in two-stage anaerobic digestion on TEs bioavailability and microbial community composition. Various VS_FW:(VS_CS:VS_CM) ratios of 8:2, 7:3, 4:6, and 2:8 were evaluated in two-stage (group A, B, C, D) anaerobic digestion in which the VS_CS:VS_CM ratio was fixed at 3:1. Results showed that the highest hydrogen production of 106 mL/g VS and methane production co-efficiency of 125.3% was obtained in group A. Group A has a high close range of easily bioavailable TEs (32-64%) compared to other groups, especially the mono-substrate, where almost all TEs ranged between 10 and 36%. The increased relative abundance of the obligate hydrogenotrophic methanogens reflected a positive two-stage methane co-digestion efficiency.

Quantitative assessment of exposure to fecal contamination in urban environment across nine cities in low-income and lower-middle-income countries and a city in the United States

BACKGROUND

During 2014 to 2019, the SaniPath Exposure Assessment Tool, a standardized set of methods to evaluate risk of exposure to fecal contamination in the urban environment through multiple exposure pathways, was deployed in 45 neighborhoods in ten cities, including Accra and Kumasi, Ghana; Vellore, India; Maputo, Mozambique; Siem Reap, Cambodia; Atlanta, United States; Dhaka, Bangladesh; Lusaka, Zambia; Kampala, Uganda; Dakar, Senegal.

OBJECTIVE

Assess and compare risk of exposure to fecal contamination via multiple pathways in ten cities.

METHODS

In total, 4053 environmental samples, 4586 household surveys, 128 community surveys, and 124 school surveys were collected. E. coli concentrations were measured in environmental samples as an indicator of fecal contamination magnitude. Bayesian methods were used to estimate the distributions of fecal contamination concentration and contact frequency. Exposure to fecal contamination was estimated by the Monte Carlo method. The contamination levels of ten environmental compartments, frequency of contact with those compartments for adults and children, and estimated exposure to fecal contamination through any of the surveyed environmental pathways were compared across cities and neighborhoods.

RESULTS

Distribution of fecal contamination in the environment and human contact behavior varied by city. Universally, food pathways were the most common dominant route of exposure to fecal contamination across cities in low-income and lower-middle-income countries. Risks of fecal exposure via water pathways, such as open drains, flood water, and municipal drinking water, were site-specific and often limited to smaller geographic areas (i.e., neighborhoods) instead of larger areas (i.e., cities).

CONCLUSIONS

Knowledge of the relative contribution to fecal exposure from multiple pathways, and the environmental contamination level and frequency of contact for those "dominant pathways" could provide guidance for Water, Sanitation, and Hygiene (WASH) programming and investments and enable local governments and municipalities to improve intervention strategies to reduce the risk of exposure to fecal contamination.

Comparison of copper and aluminum doped cobalt ferrate nanoparticles for improving biohydrogen production

Two various materials, copper and aluminum doped cobalt ferrite nanoparticles (NPs) were fabricated for investigating their effects of addition amounts on hydrogen (H₂) synthesis and process stability. CoCu_0.2Fe_1.8O₄NPs enhanced H₂ production more than CoAl_0.2Fe_1.8O₄ NPs under same condition. The highest H₂ yield of 212.25 ml/g glucose was found at optimal dosage of 300 mg/L CoCu_0.2Fe_1.8O₄ NPs, revealing the increases of 43.17% and 6.67% compared with the control without NPs and 300 mg/L CoAl_0.2Fe_1.8O₄ NPs groups, respectively. NPs level of more than 400 mg/L inhibited H₂ generation. Further investigations illustrated that CoCu_0.2Fe_1.8O₄ NPs were mainly distributed on extracellular polymer substance while CoAl_0.2Fe_1.8O₄ NPs were mostly enriched on cell membrane, which facilitated electron transfer behavior. Community structure composition demonstrated that CoCu_0.2Fe_1.8O₄ and CoAl_0.2Fe_1.8O₄ separately caused a 9.67% and 9.03% increase in Clostridium sensu stricto 1 compared with the control reactor without NPs exposure.

Effect of Engineered Biomaterials and Magnetite on Wastewater Treatment: Biogas and Kinetic Evaluation

In this study, the principle of sustaining circular economy is presented as a way of recovering valuable resources from wastewater and utilizing its energy potential via anaerobic digestion (AD) of municipality wastewater. Biostimulation of the AD process was investigated to improve its treatability efficiency, biogas production, and kinetic stability. Addressing this together with agricultural waste such as eggshells (CE), banana peel (PB), and calcined banana peels (BI) were employed and compared to magnetite (Fe₃O₄) as biostimulation additives via 1 L biochemical methane potential tests. With a working volume of 0.8 L (charge with inoculum to substrate ratio of 3:5 v/v) and 1.5 g of the additives, each bioreactor was operated at a mesophilic temperature of 40 °C for 30 days while being compared to a control bioreactor. Scanning electron microscopy and energy dispersive X-ray (SEM/EDX) analysis was used to reveal the absorbent’s morphology at high magnification of 10 kx and surface pore size of 20.8 µm. The results showed over 70% biodegradation efficiency in removing the organic contaminants (chemical oxygen demand, color, and turbidity) as well as enhancing the biogas production. Among the setups, the bioreactor with Fe₃O₄ additives was found to be the most efficient, with an average daily biogas production of 40 mL/day and a cumulative yield of 1117 mL/day. The kinetic dynamics were evaluated with the cumulative biogas produced by each bioreactor via the first order modified Gompertz and Chen and Hashimoto kinetic models. The modified Gompertz model was found to be the most reliable, with good predictability.

Organic waste conversion through anaerobic digestion: A critical insight into the metabolic pathways and microbial interactions

Anaerobic digestion is a promising method for energy recovery through conversion of organic waste to biogas and other industrial valuables. However, to tap the full potential of anaerobic digestion, deciphering the microbial metabolic pathway activities and their underlying bioenergetics is required. In addition, the behavior of organisms in consortia along with the analytical abilities to kinetically measure their metabolic interactions will allow rational optimization of the process. This review aims to explore the metabolic bottlenecks of the microbial communities adopting latest advances of profiling and ¹³C tracer-based analysis using state of the art analytical platforms (GC, GC-MS, LC-MS, NMR). The review summarizes the phases of anaerobic digestion, the role of microbial communities, key process parameters of significance, syntrophic microbial interactions and the bottlenecks that are critical for optimal bioenergetics and enhanced production of valuables. Considerations into the designing of efficient synthetic microbial communities as well as the latest advances in capturing their metabolic cross talk will be highlighted. The review further explores how the presence of additives and inhibiting factors affect the metabolic pathways. The critical insight into the reaction mechanism covered in this review may be helpful to optimize and upgrade the anaerobic digestion system.

Long-term characterization and resource potential evaluation of the digestate from food waste anaerobic digestion plants

The management of digestate from food waste (DFW) has become a big challenge for anaerobic digestion (AD) plants. It is crucial to understand the characteristics of DFW for its beneficial utilization. This study investigated the long-term characteristics of DFW from an industrial-scale AD plant in China for 16 months. The result showed that the characteristics of the DFW were relatively stable. The DFW contained considerable amounts of organic matter (23-40% of lignin and 12-26% of protein) and abundant nutrients (N, P, and K), with high concentrations of metals (e.g., 55.17 mg g^-1 and 15.55 mg g^-1 of Ca and Fe) and sulfur (1.40%) on a dry basis. Based on the results, pyrolysis and composting were evaluated as optional conversion ways of DFW. The pyrolysis temperature range of 500 °C to 600 °C was recommended for producing biochar. In this temperature range, the Brunauer-Emmett-Teller surface area of the produced biochar is over 120 m² g^-1. The composting offered the best potential for recovering the nutrients from DFW, but the high ammonia gas content (6970 ppm) should be paid attention to during composting.

Resource recovery from sugarcane vinasse by anaerobic digestion - A review

The increase in biofuel production by 2030, driven by the targets set at the 21st United Nations Framework Convention on Climate Change (COP21), will promote an increase in ethanol production, and consequently more vinasse generation. Sugarcane vinasse, despite having a high polluting potential due to its high concentration of organic matter and nutrients, has the potential to produce value-added resources such as volatile fatty acids (VFA), biohydrogen (bioH₂) and biomethane (bioCH₄) from anaerobic digestion. The objective of this paper is to present a critical review on the vinasse treatment by anaerobic digestion focusing on the final products. Effects of operational parameters on production and recovery of these resources, such as pH, temperature, retention time and type of inoculum were addressed. Given the importance of treating sugarcane vinasse due to its complex composition and high volume generated in the ethanol production process, this is the first review that evaluates the production of VFAs, bioH₂ and bioCH₄ in the treatment of this organic residue. Also, the challenges of the simultaneous production of VFA, bioH₂ and bioCH₄ and resources recovery in the wastewater streams generated in flex-fuel plants, using sugarcane and corn as raw material in ethanol production, are presented. The installation of flex-fuel plants was briefly discussed, with the main impacts on the treatment process of these effluents either jointly or simultaneously, depending on the harvest season.

Coconut shell ash enhances short-chain fatty acids production from anaerobic algae fermentation

This study proposed a novel method to enhance short-chain fatty acids (SCFAs) production from anaerobic algae fermentation by using coconut shell ash. The maximum SCFAs production was 683.0 mg COD/g VS at the ash dosage of 1.2 g/g TS, which was about 1.4-folds that of the control, and the enhancement of acetate production was the main path for the promotion of SCFAs. Coconut shell ash increased the pH and alkalinity of digestate, thereby reducing the use of alkaline reagents and being more resistant to acidic environments. Coconut shell ash promoted the processes of solubilization, hydrolysis and acetogenesis, and enriched hydrolytic microorganisms (e.g., Candidatus Microthrix) and acidifying microorganisms with acetate as substrate (e.g., Caldilinea and Proteiniphilum). Anaerobic fermentation residue with ash containing inorganic elements has the potential to be used as fertilizer, making this waste-control-waste strategy with more economic and environmental benefits for potential practical applications.

Silver nanoparticles in aquatic sediments: Occurrence, chemical transformations, toxicity, and analytical methods

Sediments represent the major sink for released silver nanoparticles (AgNPs) in aquatic environments. It is well known that the environmental behavior and toxicity of AgNPs in sediments are governed by their specific chemical species instead of their total concentration. This review focuses on various chemical transformations of AgNPs in sediments, which have not been well outlined before. We first outline the concentrations of AgNPs in sediments. The predicted concentrations are 1-5 µg kg^-1 in most model studies. Once enter sediments, AgNPs are transformed to different species (e.g., Ag₂S, Ag-humic substance complexes, AgCl, and Ag⁺) during multiple chemical transformations, such as oxidative dissolution, sulfidation, chlorination, and complexation. Those chemical behaviors mitigate the toxicity of AgNPs by reducing their availability and decreasing Ag⁺ release. Benthic invertebrates and microbes are prone to be affected by AgNPs. AgNPs are found to be accumulated in sediment-dwelling organisms and transferred to higher trophic levels along the food web. Besides X-ray absorption spectroscopy, reliable separation procedures coupled with detection techniques, are powerful tools that characterize the speciation of AgNPs in sediments. More research is needed to investigate diverse chemical transformations in various sediments through development of novel techniques and mathematical models.

Evaluation of the influence of trace metals on methane production from domestic sewage, using the Plackett-Burman experimental design

Methanogenesis involves several enzymes with trace metal components that catalyze major metabolic pathways and, therefore, requires a sufficient supply of micronutrients such as iron, nickel or cobalt. The statistically-based Plackett-Burman experimental design was adopted in this study to identify which trace metal have a statistically significant effect on the maximum methane production from domestic sewage. The addition of Barium (Ba), Cobalt (Co), Copper (Cu), Iron (Fe), Manganese (Mn), Nickel (Ni) and Selenium (Se) was tested in batch reactors using domestic sewage as the substrate and sewage sludge as the inoculum. The results showed that the addition of Fe was statistically significant, positively affecting the maximum CH₄ production (p-value 0.05). The results are expressed in L of CH₄ per g of Chemical Oxygen Demand added, increasing it from 0.10 to 0.13 LCH₄ gCOD_add^-1. In L of CH₄ per g of Volatile Solids, increased it from 0.031 to 0.040 LCH₄ gVS^-1. The addition of Se was statistically significant, but with a negative effect on the maximum methane production (p-value 0.002), which decreased from 0.13 to 0.10 LCH₄.gCOD_add^-1. Moreover, six different Fe concentrations (0, 40, 80, 120, 160 and 200 mgL^-1) were tested, showing that the addition of 120 mgL^-1 had the greatest effect for statistically improving the maximum methane production, with 33% improvement (0.12 ± 0.003 to 0.16 ± 0.012 LCH₄ gCOD_add^-1) compared to no addition of Fe and the specific CH₄ production to 0.040 ± 0.001 LCH₄ gVS^-1.

Operation of Submerged Anaerobic Membrane Bioreactors at 20 °C: Effect of Solids Retention Time on Flux, Mixed Liquor Characteristics and Performance

Four flat-sheet submerged anaerobic membrane bioreactors ran for 242 days on a simulated domestic wastewater with low Chemical Oxygen Demand (COD) and high suspended solids. Organic loading was maintained around 1.0 g COD L−1 day−1, while solids retention time (SRT) was varied from 20–90 days. This was achieved at a constant membrane flux, maintained by adjusting transmembrane pressure (TMP) in the range 1.8–9.8 kPa. Membrane fouling was assessed based on the required TMP, with mixed liquors characterised using capillary suction time, frozen image centrifugation and quantification of extracellular polymeric substances (EPS). SRT had a significant effect on these parameters: fouling was least at an SRT of 30 days and highest at 60 days, with some reduction as this extended to 90 days. Operation at SRT < 30 days showed no further benefits. Although operation at a short SRT was optimal for membrane performance it led to lower specific methane productivity, higher biomass yields and higher effluent COD. Short SRT may also have accelerated the loss of essential trace elements, leading to reduced performance under these conditions. A COD-based mass balance was conducted, including both biomass and methane dissolved in the effluent.

Nickel Foam Promotes Syntrophic Metabolism of Propionate and Butyrate in Anaerobic Digestion

Enhanced interspecies electron transfer (IET) among symbiotic microorganisms is an effective method to increase the rate of methane (CH₄) production in anaerobic digestion. Direct interspecies electron transfer (DIET), which does not involve dissolved redox media, is considered an alternative and superior method to enhance methane production by interspecific hydrogen (H₂) transfer (IHT). In this study, nickel foam was built into a semicontinuous anaerobic reactor to investigate its effect on the metabolism of propionate and butyrate. Both increased the average yield of CH₄ in anaerobic digestion by 18.1 and 15.9%, respectively. Analysis of bacterial and archaeal communities showed that the addition of nickel foam could increase the relative abundance of microbial communities involved in DIET and could increase the diversity of microorganisms in the reactor. Moreover, the anaerobic digestion performance of the nickel foam reactor was good at high hydrogen partial pressure.

Cow manure stabilizes anaerobic digestion of cocoa waste

Anaerobic digestion of a mono-feedstock often causes low methane yields and process instability. An effective strategy to overcome these barriers is co-digestion with animal manure. The obtained process improvement is often attributed to buffer capacity, nutrients, vitamins and trace metals, and microorganisms present in manure, but it remains unknown which factor plays the key role in digester performance. Here, we investigated anaerobic digestion of cocoa waste in four different treatments: mono-digestion, addition of synthetic nutrients, co-digestion with sterile cow manure, and co-digestion with raw cow manure. Co-digestion with raw manure resulted in the highest methane yield of 181 ± 39 L kg^-1 VS (volatile solids), similar to the co-digestion with sterile manure, i.e., 162 ± 52 L kg^-1 VS. The supplementation of synthetic nutrients to the anaerobic digestion of cocoa waste only temporarily increased methane yield, indicating that this will tackle a lack of nutrients in the short term, but has a limited long-term contribution to the stabilization of the process. Hence, because of the inability of synthetic nutrients to stabilize the digestion process and the similarity between the digesters fed sterile and raw manure, both at the physico-chemical and microbial level, the key contribution of manure co-digestion with cocoa seems to be the provision of buffering capacity.

Anaerobic Co-Digestion of Tannery and Slaughterhouse Wastewater for Solids Reduction and Resource Recovery: Effect of Sulfate Concentration and Inoculum to Substrate Ratio

Anaerobic digestion is considered unsuitable for the bioremediation of tannery effluent due to process inhibition, mainly due to high concentrations of sulfur species, and the accumulation of H2S and/or NH3. This study using the standardized biochemical methane potential protocol showed that efficient processing is possible with slaughterhouse wastewater, provided sufficient functional biomass is present at the start of the process and the SO42− concentration is below inhibition threshold. Methanogenic activity (K = 13.4–17.5 and µm = 0.15–0.27) and CH4 yields were high when reactors were operated ISR ≥ 3 and/or lower SO42− ≤ 710 mg/L while high SO42− ≥ 1960 mg/L and ISR < 3.0 caused almost complete inhibition regardless of corresponding ISR and SO42−. The theoretical optimum operating conditions (922 mg/L SO42−, ISR = 3.72) are expected to generate 361 mL biogas/gVS, 235 mL CH4/gVS with reduction efficiencies of 27.5% VS, 27.4% TS, 75.1% TOC, 75.6% SO42−, and 41.1% COD. This implies that tannery sludge will be reduced by about 27% (dry mass) and SO42− by 76%, with a fraction of it recovered as S0. The models displayed a perfect fit to the cumulative CH4 yields with high precision in the order Logistic > Cone > modified Gompertz > first order.

A general framework to model the fate of trace elements in anaerobic digestion environments

Due to the multiplicity of biogeochemical processes taking place in anaerobic digestion (AD) systems and limitations of the available analytical techniques, assessing the bioavailability of trace elements (TEs) is challenging. Determination of TE speciation can be facilitated by developing a mathematical model able to consider the physicochemical processes affecting TEs dynamics. A modeling framework based on anaerobic digestion model no 1 (ADM1) has been proposed to predict the biogeochemical fate TEs in AD environments. In particular, the model considers the TE adsorption–desorption reactions with biomass, inerts and mineral precipitates, as well as TE precipitation/dissolution, complexation reactions and biodegradation processes. The developed model was integrated numerically, and numerical simulations have been run to investigate the model behavior. The simulation scenarios predicted the effect of (i) organic matter concentration, (ii) initial TEs concentrations, (iii) initial Ca–Mg concentrations, (iv) initial EDTA concentration, and (v) change in TE binding site density, on cumulative methane production and TE speciation. Finally, experimental data from a real case continuous AD system have been compared to the model predictions. The results prove that this modelling framework can be applied to various AD operations and may also serve as a basis to develop a model-predictive TE dosing strategy.

Enhanced anaerobic digestion with the addition of chelator-nickel complexes to improve nickel bioavailability

Nickel (Ni) is one of the most essential trace elements in the anaerobic digestion system. In this study, green chelating agent Ethylenediamine-N, N'-disuccinic acid (EDDS), common chelating agents with low biodegradability nitrilotriacetic acid (NTA) and ethylenediaminetetraacetic acid (EDTA) were respectively used as ligands of Ni (II) to inspect the feasibility of enhancing methane production and reducing Ni dosage. In practice, continuous stirred-tank reactors (37 °C, 120 rpm) were operated with a mixture of pig manure and food waste as the substrate, and were supplied with extra Ni in the form of Ni (II) (0, 2.5, and 5.0 mg/L) or chelator‑nickel (EDDS-Ni, NTA-Ni and EDTA-Ni) complexes (2.5 mg/L). The results showed that compared with that of adding Ni (2.5 mg/L) individually, the methane production increased of 23.34%, 31.26% and 16.07% with the addition of EDDS-Ni, NTA-Ni and EDTA-Ni complexes (2.5 mg/L), respectively. Accompanying with that, the EDDS-Ni and NTA-Ni supplementations both significantly increased the F430 concentration of 28% and 36% on the day of peak methane production (day five). The BCR sequential extraction analysis indicated that the sum of Ni in water soluble and exchangeable fractions after digestion were increased of 43.28%, 39.41%, and 24.29%, respectively. Further, the acid-volatile sulfide (AVS) and the simultaneously extracted nickels (SEMNi) content in sediments confirmed that the chelator‑nickel improved Ni bioavailability due to dissolution of nickel ions from their sulfides. This study demonstrated that the addition of chelator-Ni complexes was a practicable method to enhance methane production and reduced Ni dosage.

Divergent response of heavy metal bioavailability in soil rhizosphere to agricultural land use change from paddy fields to various drylands

The heavy metal pollution induced by agricultural land use change has attracted great attention. In this study, the divergent response of the bioavailability of heavy metals in rhizosphere soil to different agricultural land uses was analyzed using sequential extraction, and possible influence paths were constructed. The results show that land use change can affect the heavy metal bioavailability by influencing the soil organic matter and redox potential (Eh). The average concentrations of N, P, K, Ca, Mg, S, and Fe in the soil showed no significant differences. However, the conversion direction and extent of chemical speciation of heavy metals were different across land use changes from paddy fields to various drylands. After conversion from paddy to wheat field, the bioavailability of heavy metals decreased due to an increase in permanganate oxidizable carbon (KMnO₄-C) and a decrease in Eh. The transformation from paddy to celery soil is accompanied by a change in the soil's KMnO₄-C content, increasing the proportion of the bioavailable states of heavy metals. However, the response of bioavailability to changes in the soil KMnO₄-C varied among heavy metals. In contrast, when land use changed to grapevine culture, the bioavailability of heavy metals increased due to a change in the KMnO₄-C content. Moreover, the dissolved organic carbon (DOC) content increased, which positively affected the Eh and, in turn, increased the bioavailability of heavy metals. This research is of great significance for understanding the impact of land use change on the heavy metal migration and activity in the rhizosphere microenvironment of soil.

Novel biorefining method for succinic acid processed from sugarcane bagasse

Sugarcane bagasse (SCB) was pretreated with hot water (HLW), ethanol (ETH), and sodium hydroxide (SH). The obtained residuals were hydrolyzed and applied as carbon sources for succinic acid (SA) fermentation, the residue digestibility and SA conversion rate of alkali-pretreated residual were superior to others. Considering the characteristics of alkali pretreatment, enzymatic hydrolysis and succinic acid fermentation, a novel in-situ semi-simultaneous saccharification and co-fermentation (SSSCF) procedure for SA production from SCB was developed. The yield, productivity, and conversion rates of SA from SCB raw material (DRM) processed by SSSCF were 41 g/L, 300 mg/L/h, and 320 mg/g dry, respectively. For every kilogram of SA production, the developed coupling method reduced the SH and water usages, energy consumption, and effluent emission by 0.14 kg, 233.5 L 14,000 kJ and 7 L, respectively, and enhanced the SA productivity by 1.7 times compared with the non-coupling procedure.

Impact of nanoparticle inclusion on bioethanol production process kinetic and inhibitor profile

•

NiO nanoparticle (NP) inclusion enhanced bioethanol production up to 59.96 %.

•

Band energy gap impact NP catalytic performance in bioethanol production.

•

NiO nanoparticle biocatalyst improved bioethanol productivity by 145 %.

•

Modified Gompertz model was used to describe ethanol production with NP inclusion.

•

Metallic NiO nanoparticles significantly reduced acetic acid concentration by 110 %.

This study examines the effects of nanoparticle inclusion in instantaneous saccharification and fermentation (NIISF) of waste potato peels. The effect of nanoparticle inclusion on the fermentation process was investigated at different stages which were: pre-treatment, liquefaction, saccharification and fermentation. Inclusion of NiO NPs at the pre-treatment stage gave a 1.60-fold increase and 2.10-fold reduction in bioethanol and acetic acid concentration respectively. Kinetic data on the bioethanol production fit the modified Gompertz model (R ² > 0.98). The lowest production lag time (t _L) of 1.56 h, and highest potential bioethanol concentration (P _m) of 32 g/L were achieved with NiO NPs inclusion at different process stages; the liquefaction stage and the pre-treatment phase, respectively. Elevated bioethanol yield, coupled with substantial reduction in process inhibitors in the NIISF processes, demonstrated the significance of point of nanobiocatalysts inclusion for the scale-up development of bioethanol production from potato peels.

Horticulture and Orchards as New Markets for Manure Valorisation with Less Environmental Impacts

Animal manure management is a real challenge to minimize environmental impacts and ensure that this valuable material is efficiently used in a circular economy context. One of the main limitations for larger use of animal manure as fertilizer is the availability of land to receive it in an area close to the farm. Indeed, animal manure is traditionally used for cereals and animal feed growth, but the soil area occupied with these crops might not be enough to receive all the manure produced and/or part of this soil might have nutrient contents, namely phosphorous, that do not permit further application of manure. Hence, extra land used for other agricultural activities might be an option. The main objective of the present review was to analyse the constraints and solutions to increase the use of manure in horticulture and orchards. Emphasis was given to the legal framework for manure utilization in the EU that might stimulate or restrain such a solution. The main characteristics of manure that might limit or stimulate manure reuse were also described, and the potential of some treatments to valorise manure was analysed. Several examples of alternative uses of manure in horticulture and orchards were examined, and the society and farmers’ acceptance of the proposed solution was addressed.