High-water-content mouldable polyvinyl alcohol-borax hydrogels reinforced by well-dispersed cellulose nanoparticles: dynamic rheological properties and hydrogel formation mechanism

Study the effect of different concentrations of polydopamine as a secure and bioactive crosslinker on dual crosslinking of oxidized alginate and gelatin wound dressings

Alginate hydrogels are commonly used in wound care due to their ability to maintain a moist environment, absorb fluids, and aid wound healing. However, their stability and mechanical properties can sometimes limit their effectiveness. This study explores a new approach by creating a dual network system of oxidized alginate and gelatin hydrogel crosslinked with polydopamine in a single step, with the goal of improving the mechanical properties of these hydrogels. The unique aspect of this research is the comprehensive examination of different polydopamine concentrations in dual crosslinking systems. First, alginate was modified with sodium periodate to create additional active groups on its backbone, and various polydopamine concentrations were then tested to assess their impact on the dual crosslinking network and hydrogel properties. The study involved a range of tests, including FTIR, H-NMR, SEM, gelation time, rheology, adhesion, antioxidant activity, swelling ratio, weight loss, drug release, and cell viability. The addition of polydopamine was found to enhance the crosslinking density (0.859 × 109 mol.cm-3). Additionally, the results indicated improvements in properties such as reduced weight loss, enhanced antioxidant and adhesive qualities, and better mechanical properties (2240 kPa). However, the optimal concentration of polydopamine must be determined to achieve the best properties for a wound dressing. Excessive polydopamine can increase the space between polymer chains, leading to a reduction in crosslinking density and storage modulus. Nevertheless, it can also increase the swelling ratio, degradation rate, pore size, porosity, antioxidant activity, and dopamine release. Therefore, identifying the optimal concentration for a functional hydrogel is crucial. Notably, the hydrogel containing 0.5 mg.mL-1 polydopamine exhibited outstanding cell viability (108 % on the third day), swelling capacity (480 %), storage modulus (2240 kPa), gelation time (3 min), antioxidant activity (42.27 %), and skin adherence (11 kPa), making it an optimal choice for advanced wound management. According to the findings, it is emphasized that the application of this particular hydrogel expedites wound healing, as indicated by wound closure and histological studies. ABBREVIATIONS.

A bioactive self-healing hydrogel wound-dressing based on Tragacanth gum: Structural and invitro biomedical investigations

The design and development of wound-dressing hydrogels with desirable therapeutic effects and proper mechanical and self-healing properties are crucial in the healthcare sector. This research aims to prepare a new self-healing hydrogel based on Tragacanth, polyvinyl alcohol, and borax to be used as a wound dressing, the hydrogel was first prepared through a simple and one-pot reaction. The efficiency of the resulting product was then assessed based on the rheological and self-healing tests as well as cellular tests on a mouse fibroblast cell line (L929) including toxicity and scratch tests as well as the investigation of the expression of TGFβ1, TGFβ2, and VEGF-A gens (using Real-time PCR). The synthesized hydrogel exhibited proper mechanical strength, high self-healing features, and no toxicity (cell viability >100 %). Rheological studies indicate that hydrogels with a higher borax content (PVA: B ratio of 5:1) exhibit a higher storage modulus across all frequencies. The presence of hydrogel improved the migration of the L929 cells and scratch healing. The hydrogel also caused a significant improvement in the expression of the growth factors of the genes (P < 0.001). Therefore, it can be concluded that the prepared wound dressing can actively contribute to wound healing, opening promising potentials in medical applications.

Facile Preparation of Irradiated Poly(vinyl alcohol)/Cellulose Nanofiber Hydrogels with Ultrahigh Mechanical Properties for Artificial Joint Cartilage

In this study, Poly(vinyl alcohol)/cellulose nanofiber (PVA/CNF) hydrogels have been successfully prepared using γ-ray irradiation, annealing, and rehydration processes. In addition, the effects of CNF content and annealing methods on the hydrogel properties, including gel fraction, micromorphology, crystallinity, swelling behavior, and tensile and friction properties, are investigated. Consequently, the results show that at an absorbed dose of 30 kGy, the increase in CNF content increases the gel fraction, tensile strength, and elongation at break of irradiated PVA/CNF hydrogels, but decreases the water absorption. In addition, the cross-linking density of the PVA/CNF hydrogels is significantly increased at an annealing temperature of 80 °C, which leads to the transition of the cross-sectional micromorphology from porous networks to smooth planes. For the PVA/CNF hydrogel with a CNF content of 0.6%, the crystallinity increases from 19.9% to 25.8% after tensile annealing of 30% compared to the original composite hydrogel. The tensile strength is substantially increased from 65.5 kPa to 21.2 MPa, and the modulus of elasticity reaches 4.2 MPa. Furthermore, it shows an extremely low coefficient of friction (0.075), which suggests that it has the potential to be applied as a material for artificial joint cartilage.

Multibiofunctional Self-healing Adhesive Injectable Nanocomposite Polysaccharide Hydrogel

Injectable hydrogels with good antimicrobial and antioxidant properties, self-healing characteristics, suitable mechanical properties, and therapeutic effects have great practical significance for developing treatments for pressing healthcare challenges. Herein, we have designed a novel, self-healing injectable hydrogel composite incorporating cross-linked biofunctional nanomaterials by mixing alginate aldehyde (Ox-Alg), quaternized chitosan (QCS), adipic acid dihydrazide (ADH), and copper oxide nanosheets surface functionalized with folic acid as the bioligand (F-CuO). Gelation was achieved under physiological conditions via the dynamic Schiff base cross-linking mechanism. The developed nanocomposite injectable hydrogel demonstrated the fast self-healing ability essential to bear deformation and outstanding antibacterial properties along with ROS scavenging ability. Furthermore, the optimized formulation of our F-CuO-embedded injectable hydrogel exhibited excellent cytocompatibility, blood compatibility, and in vitro wound healing performance. Taken together, the F-CuO nanosheet cross-linked injectable hydrogel composite presented herein offers a promising candidate biomaterial with multifunctional properties to develop solutions for addressing clinical challenges.

The Diels-Alder Cross-Linked Gelatin/Dextran Nanocomposite Hydrogels with Silver Nanoparticles for Wound Healing Applications: Synthesis, Characterization, and In Vitro Evaluation

Wound healing involves a sophisticated biological process that relies on ideal conditions to advance through various stages of repair. Modern wound dressings are designed to imitate the natural surroundings around cells and offer properties such as moisture regulation, strength, and antimicrobial defense to boost healing. A recent research project unveiled a new type of gelatin (Gel)/dextran (Dex) hydrogels, linked through Diels-Alder (D-A) reactions, loaded with silver nanoparticles (Ag-NPs) for cutting-edge wound treatment. Gel and Dex were chemically modified to form the hydrogels via the D-A reaction. The hydrogels were enriched with Ag-NPs at varying levels. Thorough analyses of the hydrogels using methods like NMR, FT-IR, and SEM were carried out to assess their structure and nanoparticle integration. Rheological tests displayed that the hydrogels had favorable mechanical attributes, particularly when Ag-NPs were included. The hydrogels demonstrated controlled swelling, responsiveness to pH changes, and were non-toxic. Testing against E. coli showcased the strong antibacterial activity of the nanocomposite hydrogels in a concentration-dependent manner. This investigation showcased the promise of these bioactive nanocomposite hydrogels in promoting speedy wound healing by maintaining a moist environment, offering an antimicrobial shield, and ensuring mechanical support at the wound site.

Self-healing, antioxidant, and antibacterial Bletilla striata polysaccharide-tannic acid dual dynamic crosslinked hydrogels for tissue adhesion and rapid hemostasis

Biomaterials capable of achieving effective sealing and hemostasis at moist wounds are in high demand in the clinical management of acute hemorrhage. Bletilla striata polysaccharide (BSP), a natural polysaccharide renowned for its hemostatic properties, holds promising applications in biomedical fields. In this study, a dual-dynamic-bonds crosslinked hydrogel was synthesized via a facile one-pot method utilizing poly(vinyl alcohol) (PVA)-borax as a matrix system, followed by the incorporation of BSP and tannic acid (TA). Chemical borate ester bonds formed around borax, coupled with multiple physical hydrogen bonds between BSP and other components, enhanced the mechanical properties and rapid self-healing capabilities. The catechol moieties in TA endowed the hydrogel with excellent adhesive strength of 30.2 kPa on the surface of wet tissues and facilitated easy removal without residue. Benefiting from the synergistic effect of TA and the preservation of the intrinsic properties of BSP, the hydrogel exhibited outstanding biocompatibility, antibacterial, and antioxidant properties. Moreover, it effectively halted acute bleeding within 31.3 s, resulting in blood loss of 15.6 % of that of the untreated group. As a superior hemostatic adhesive, the hydrogel in this study is poised to offer a novel solution for addressing future acute hemorrhage, wound healing, and other biomedical applications.

Using bacterial cellulose to bridge covalent and physical crosslinks in hydrogels for fabricating multimodal sensors

Network optimization is vital for the polysaccharide based hydrogels with multiple crosslinks. In this study, we developed a 'two-step' strategy to activate synergistic effect of chemical and physical crosslinks using a poly (vinyl alcohol) (PVA)/bacterial cellulose (BC) hydrogel as a template. The BC nanofibers, on the one hand, acted as nucleating agents, participating in the crystallization of PVA, and on the other hand, were also involved in the formation of boronic ester bond, anchored with the PVA chains via chemical bonding. Therefore, the existence of BC nanofibers, as 'bridge', linked the crystalline regions and amorphous parts of PVA together, associating the two characteristic crosslinks, which was conducive to load transfer. The mechanical properties of resultant hydrogels, including the tensile elongation and strength, as well as fracture toughness, were significantly improved. Moreover, the dually cross-linked hydrogels possessed ionic conductivity, which was sensitive to the tensile deformation and environmental temperature. This study clarifies a unique role of BC nanofibers in hydrogels, and proposes an effective approach to construct multiple networks in the nanocellulose reinforced PVA hydrogels.

Process-structure-property relationships of cellulose nanocrystals derived from Juncus effusus stems on ҡ-carrageenan-based bio-nanocomposite films

This study investigates the potential of Juncus plant fibers as a renewable source for producing cellulose nanocrystals (CNs) to reinforce polymers. Cellulose microfibers (CMFs) were extracted with a 0.43 ± 0.2 μm diameter and 69 % crystallinity through alkaline and bleaching treatments, then subjected to sulfuric acid hydrolysis, yielding four CN types (CN10, CN15, CN20 and CN30) with distinct physico-chemical properties and aspect ratios (47, 55, 57, and 60). The study assessed the influence of cellulose nanocrystals (CNs), incorporated at different weight percentages (3 %, 5 %, and 8 %), on thermal, transparency, and mechanical properties in k-carrageenan (CA) biocomposite films. The results indicate significant enhancements in these characteristics, highlighting good compatibility between CNs and CA matrix. Particularly noteworthy is the observed substantial improvement in tensile strength at an 8 wt% loading, with values of 23.43 ± 0.83 MPa for neat CA, 33.53 ± 0.83 MPa for CA-CN10, 36.67 ± 0.71 MPa for CA-CN15, 37.65 ± 0.56 MPa for CA-CN20, and 39.89 ± 0.77 MPa for CA-CN30 composites. Furthermore, the research explores the connection between the duration of hydrolysis and the properties of cellulose nanocrystals (CNs), unveiling their influence on the characteristics of nanocomposite films. Prolonged hydrolysis enhances CN crystallinity (CrI), aspect ratio, and surface charge content, consequently enhancing mechanical features like strength and flexibility in these films. These findings demonstrate the potential of Juncus plant fibers as a natural and eco-friendly resource for producing CNs that effectively reinforce polymers, making them an attractive option for diverse applications in the field.

The Electrical and Mechanical Characteristics of Conductive PVA/PEDOT:PSS Hydrogel Foams for Soft Strain Sensors

Conductive hydrogels are of interest for highly flexible sensor elements. We compare conductive hydrogels and hydrogel foams in view of strain-sensing applications. Polyvinyl alcool (PVA) and poly(3,4-ethylenedioxythiophene (PEDOT:PSS) are used for the formulation of conductive hydrogels. For hydrogel foaming, we have investigated the influence of dodecylbenzenesulfonate (DBSA) as foaming agent, as well as the influence of air incorporation at various mixing speeds. We showed that DBSA acting as a surfactant, already at a concentration of 1.12wt%, efficiently stabilizes air bubbles, allowing for the formulation of conductive PVA and PVA/PEDOT:PSS hydrogel foams with low density (<400 kg/m3) and high water uptake capacity (swelling ratio > 1500%). The resulting Young moduli depend on the air-bubble incorporation from mixing, and are affected by freeze-drying/rehydration. Using dielectric broadband spectroscopy under mechanical load, we demonstrate that PVA/PEDOT:PSS hydrogel foams exhibit a significant decrease in conductivity under mechanical compression, compared to dense hydrogels. The frequency-dependent conductivity of the hydrogels exhibits two plateaus, one in the low frequency range, and one in the high frequency range. We find that the conductivity of the PVA/PEDOT:PSS hydrogels decreases linearly as a function of pressure in each of the frequency regions, which makes the hydrogel foams highly interesting in view of compressive strain-sensing applications.

Facile Fabrication of NIR-Responsive Alginate/CMC Hydrogels Derived through IEDDA Click Chemistry for Photothermal-Photodynamic Anti-Tumor Therapy

Novel chemically cross-linked hydrogels derived from carboxymethyl cellulose (CMC) and alginate (Alg) were prepared through the utilization of the norbornene (Nb)-methyl tetrazine (mTz) click reaction. The hydrogels were designed to generate reactive oxygen species (ROS) from an NIR dye, indocyanine green (ICG), for combined photothermal and photodynamic therapy (PTT/PDT). The cross-linking reaction between Nb and mTz moieties occurred via an inverse electron-demand Diels-Alder chemistry under physiological conditions avoiding the need for a catalyst. The resulting hydrogels exhibited viscoelastic properties (G' ~ 492-270 Pa) and high porosity. The hydrogels were found to be injectable with tunable mechanical characteristics. The ROS production from the ICG-encapsulated hydrogels was confirmed by DPBF assays, indicating a photodynamic effect (with NIR irradiation at 1-2 W for 5-15 min). The temperature of the ICG-loaded hydrogels also increased upon the NIR irradiation to eradicate tumor cells photothermally. In vitro cytocompatibility assessments revealed the non-toxic nature of CMC-Nb and Alg-mTz towards HEK-293 cells. Furthermore, the ICG-loaded hydrogels effectively inhibited the metabolic activity of Hela cells after NIR exposure.

Characterization of Cellulose Fiber Derived from Hemp and Polyvinyl Alcohol-Based Composite Hydrogel as a Scaffold Material

Cellulose nanocrystals (CNCs) were successfully extracted and purified from hemp using an alkaline treatment and bleaching process and subsequently used in conjunction with polyvinyl alcohol to form a composite hydrogel. Cellulose nanocrystals (1-10% (w/v)) were integrated into polyvinyl alcohol, and sodium tetraborate (borax) was employed as a crosslinking agent. Due to the small number of cellulose nanocrystals, no significant peak change was observed in the FT-IR spectra compared to pristine polyvinyl alcohol. The porosity was created upon the removal of the water molecules, and the material was thermally stable up to 200 °C. With the presence of cellulose nanocrystals, the melting temperature was slightly shifted to a higher temperature, while the glass transition temperature remained practically unchanged. The swelling behavior was examined for 180 min in deionized water and PBS solution (pH 7.4) at 37 °C. The degree of swelling of the composite with cellulose nanocrystals was found to be higher than that of pristine PVA hydrogel. The cell viability (%) of the prepared hydrogel with different proportions of cellulose nanocrystals was higher than that of pristine PVA hydrogel. Based on the results, the prepared composite hydrogels from cellulose nanocrystals extracted from hemp and polyvinyl alcohol were revealed to be an excellent candidate for scaffold material for medical usage.

Highly Stretchable, Self-Healing, Injectable and pH Responsive Hydrogel from Multiple Hydrogen Bonding and Boron-Carbohydrate Interactions

A simple and cost-effective method for the fabrication of a safe, dual-responsive, highly stretchable, self-healing and injectable hydrogel is reported based on a combination of dynamic boronate ester bonds and hydrogen bonding interactions. The mechanical properties of the hydrogel are tunable by adjusting the molar ratios between sugar moieties on the polymer and borax. It was remarkable to note that the 2:1 ratio of sugar and borate ion significantly improves the mechanical strength of the hydrogel. The injectability, self-healing and stretchability properties of the hydrogel were also examined. In addition, the impact of the variation of the pH and the addition of free sugar responsiveness of the hydrogel was studied. High MRC-5 cell viability was noticed by the 3D live/dead assay after 24 h cell culture within the hydrogel scaffold. Hence, the developed hydrogels have desirable features that warrant their applications for drug delivery, scaffolds for cell and tissue engineering.

A facile strategy to fabricate high-barrier, water- and oil-repellent paper with carboxymethyl cellulose/collagen fiber/modified polyvinyl alcohol

Due to the increasingly serious environmental and human health hazards brought by traditional food packaging materials, paper-based packaging materials have become increasingly popular among consumers in recent years. Currently, the fabrication of fluorine-free degradable water- and oil-repellent paper using low-cost bio-based polymers by a simple method is a hot subject in the field of food packaging. In this work, we used carboxymethyl cellulose (CMC), collagen fiber (CF), and modified polyvinyl alcohol (MPVA) to create coatings that were impervious to water and oil. The homogeneous mixture of CMC and CF generated electrostatic adsorption to impart excellent oil repellency to the paper. PVA was chemically modified by sodium tetraborate decahydrate, and the MPVA coating imparted excellent water-repellent properties to the paper. Finally, the water- and oil-proof paper showed excellent water repellency (Cobb value: 1.12 g/m²), oil repellency (kit rating: 12/12), low air permeability (0.3 μm/Pa·s), and stronger mechanical properties (4.19 kN/m). This non-fluorinated degradable water- and oil-repellent paper with high barrier properties prepared by a convenient method is expected to be in widespread use in the food packaging field.

Chitin nanocrystal-assisted 3D bioprinting of gelatin methacrylate scaffolds

In recent years, there has been an increasing focus on the application of hydrogels in tissue engineering. The integration of 3D bioprinting technology has expanded the potential applications of hydrogels. However, few commercially available hydrogels used for 3D biological printing exhibit both excellent biocompatibility and mechanical properties. Gelatin methacrylate (GelMA) has good biocompatibility and is widely used in 3D bioprinting. However, its low mechanical properties limit its use as a standalone bioink for 3D bioprinting. In this work, we designed a biomaterial ink composed of GelMA and chitin nanocrystal (ChiNC). We explored fundamental printing properties of composite bioinks, including rheological properties, porosity, equilibrium swelling rate, mechanical properties, biocompatibility, effects on the secretion of angiogenic factors and fidelity of 3D bioprinting. The results showed that adding 1% (w/v) ChiNC to 10% (w/v) GelMA improved the mechanical properties and printability of the GelMA hydrogels, promoted cell adhesion, proliferation and vascularization and enabled the printing of complex 3D scaffolds. This strategy of incorporating ChiNC to enhance the performance of GelMA biomaterials could potentially be applied to other biomaterials, thereby expanding the range of materials available for use. Furthermore, in combination with 3D bioprinting technology, this approach could be leveraged to bioprint scaffolds with complex structures, further broadening the potential applications in tissue engineering.

Lignin nanoparticle reinforced multifunctional polyvinyl alcohol/polyurethane composite hydrogel with excellent mechanical, UV-blocking, rheological and thermal properties

In this study, we innovatively synthesized a multifunctional PVA/PU-LNP composite hydrogel with integrated distinguished UV-blocking, mechanical strength, dynamic viscoelasticity and thermal properties by introducing lignin nanoparticle (LNP) into polyvinyl alcohol (PVA) and polyurethane (PU) mixed matrix through freeze-thaw cycle. The rigid porous network structure was established by hydrogen bond interactions among the well-distributed LNP and PVA/PU molecular chains, which endowed excellent mechanical strength, viscoelasticity, thermal stability and flexibility with PVA/PU-LNP composite hydrogel. The elongation at break and tensile strength of PVA/PU-LNP composite hydrogel were markedly improved from 227.3 % and 247.1 KPa to 460.1 % and 950.4 KPa with the LNP loading of 2 % based on PVA weight, respectively. Meanwhile, PVA/PU-2%LNP hydrogel exhibited prominent compressive resistance and pleasing shape recovery capability. Moreover, the blending of LNP at a low dosage (0.5 %) based on PVA weight effectively shielded 99.34 % of UV light and penetrated 42.27 % of visible light, indicating that PVA/PU-LNP composite hydrogel demonstrated outstanding anti-UV performance. In addition, the incorporation of LNP caused a remarkable decline in the pore size of PVA/PU-LNP composite hydrogel (4.39 ± 0.46 μm to 1.54 ± 0.22 μm), which slightly reduced water uptake capacity of composite hydrogel. Therefore, this work provided a new approach to constructing a multifunctional composite hydrogel.

Enhanced hybrid hydrogel based on wheat husk lignin-rich nanocellulose for effective dye removal

Polyvinyl alcohol (PVA) hydrogels were enhanced mechanically through the addition of lignin-rich nanocellulose (LCN), soluble ash (SA) and montmorillonite (MMT) for dye removal. The hybrid hydrogels reinforced with 33.3 wt% of LCN had a 163.0% increase in storage modulus as compared to the PVA/0LCN-33.3SM hydrogel. LCN can be added to the PVA hydrogel to alter its rheological properties. Additionally, hybrid hydrogels were highly efficient in removing methylene blue from wastewater, which was attributed to the synergistic effects of the PVA matrix supporting embedded LCN, MMT, and SA. The adsorption time (0–90 min) showed that the hydrogels containing MMT and SA had high removal efficiency, and the adsorption of methylene blue (MB) by PVA/20LCN-13.3SM was greater than 95.7% at 30°C. It was found that MB efficiency decreased with a high MMT and SA content. Our study provided a new method for the fabrication of polymers-based eco-friendly, low-cost and robust physical hydrogels for the MB removal.

3D Printable Self-Adhesive and Self-Healing Ionotronic Hydrogels for Wearable Healthcare Devices

Ionotronic hydrogels have attracted significant attention in emerging fields such as wearable devices, flexible electronics, and energy devices. To date, the design of multifunctional ionotronic hydrogels with strong interfacial adhesion, rapid self-healing, three-dimensional (3D) printing processability, and high conductivity are key requirements for future wearable devices. Herein, we report the rational design and facile synthesis of 3D printable, self-adhesive, self-healing, and conductive ionotronic hydrogels based on the synergistic dual reversible interactions of poly(vinyl alcohol), borax, pectin, and tannic acid. Multifunctional ionotronic hydrogels exhibit strong adhesion to various substrates with different roughness and chemical components, including porcine skin, glass, nitrile gloves, and plastics (normal adhesion strength of 55 kPa on the skin). In addition, the ionotronic hydrogels exhibit intrinsic ionic conductivity imparting strain-sensing properties with a gauge factor of 2.5 up to a wide detection range of approximately 2000%, as well as improved self-healing behavior. Based on these multifunctional properties, we further demonstrate the use of ionotronic hydrogels in the 3D printing process for implementing complex patterns as wearable strain sensors for human motion detection. This study is expected to provide a new avenue for the design of multifunctional ionotronic hydrogels, enabling their potential applications in wearable healthcare devices.

Rapid Preparation of Antifreezing Conductive Hydrogels for Flexible Strain Sensors and Supercapacitors

Conductive hydrogels have shown great promise in flexible electronics, but their practical applications may be impeded by the time-consuming and energy-consuming polymerization process. We proposed a sodium lignosulfonate-Fe (SLS-Fe) strategy to address this challenge and took advantage of carboxymethyl cellulose (CMC) and poly(acrylic acid) to prepare the CMC/PAA/Fe3+/LiCl interpenetrating conductive hydrogels with good self-healing properties, antifreezing properties, and a 6-fold increase in conductivity in this study. The hydrogel-based flexible strain sensors demonstrated a broad detection range (400%), high sensitivity (GF = 6.19 at 200-400%), and human motion detection capability. The hydrogel-based supercapacitor exhibited a single-electrode specific capacitance of 122.36 F g-1 which successfully powered LEDs. Furthermore, the supercapacitor showed a single-electrode specific capacitance of 83.16 F g-1 at -23 °C (68% of the one exhibited at 25 °C). Therefore, the multifunctional performance of the CMC/PAA/Fe3+/LiCl hydrogel is anticipated to play an exemplary role in a new generation of flexible electronics.

Implantable 3D Printed Hydrogel Scaffolds Loading Copper-Doxorubicin Complexes for Postoperative Chemo/Chemodynamic Therapy

Biomaterial-based implants hold great potential for postoperative cancer treatment due to the enhanced drug dosage at the disease site and decreased systemic toxicity. However, the elaborate design of implants to avoid complicated chemical modification and burst release remains challenging. Herein, we report a three-dimensional (3D) printed hydrogel scaffold to enable sustained release of drugs for postoperative synergistic cancer therapy. The hydrogel scaffold is composed of Pluronic F127 and sodium alginate (SA) as well as doxorubicin (DOX) and copper ions (F127-SA/Cu-DOX hydrogel scaffold). Benefiting from the coordination of Cu(II) with both SA and DOX, burst release of DOX can be overcome, and prolonged release time can be achieved. The therapeutic efficiency can be adjusted by altering the amount of DOX and Cu(II) in the scaffolds. Moreover, apoptosis and ferroptosis of cancer cells can be induced through the combination of chemotherapy and chemodynamic therapy. In addition, DOX supplies excess hydrogen peroxide to enhance the efficiency of Cu-based chemodynamic therapy. When implanted in the resection site, hydrogel scaffolds effectively inhibit tumor growth. Overall, this study may offer a new strategy for fabricating local implants with synergistic therapeutic performance for preventing postoperative cancer recurrence.

Constructing a self-healing injectable SABA/Borax/PDA@AgNPs hydrogel for synergistic low-temperature photothermal antibacterial therapy

Infections caused by bacteria are one of the biggest challenges humans face around the world. Photothermal therapy (PTT) has been regarded as a promising strategy in combating pathogenic infection, however the high temperatures (55-65 °C) required during a single PTT process can induce injury to healthy tissues nearby. Combination therapy could overcome this problem by reducing the photothermal temperature. Here, we developed a self-healing and injectable hydrogel to realize low-temperature PTT (LT-PTT, ≤45 °C) for antisepsis with high-efficiency. The hybrid hydrogel is prepared by incorporating borax into a mixture of 3-aminophenylboronic acid grafted sodium alginate and nano-silver decorated polydopamine nanoparticles. Our results showed that the SABA/Borax/PDA@AgNPs hydrogel possesses satisfactory mechanical properties and self-healing capacity, and as a result, it can repair itself after being damaged mechanically, retaining its integrality and recovering its initial functionalities. Furthermore, through utilizing the photothermal property of polydopamine nanoparticles and broad-spectrum antibacterial activity of nano-silver, the hybrid hydrogel achieves excellent LT-PTT for sterilization both in vitro as well as in an in vivo mice skin wound model with no distinct injury to normal tissues. Overall, our prepared hydrogel is expected to be an excellent candidate for treating bacterial infections.

Research Advances in Mechanical Properties and Applications of Dual Network Hydrogels

Hydrogels with a three-dimensional network structure are particularly outstanding in water absorption and water retention because water exists stably in the interior, making the gel appear elastic and solid. Although traditional hydrogels have good water absorption and high water content, they have poor mechanical properties and are not strong enough to be applied in some scenarios today. The proposal of double-network hydrogels has dramatically improved the toughness and mechanical strength of hydrogels that can adapt to different environments. Based on ensuring the properties of hydrogels, they themselves will not be damaged by excessive pressure and tension. This review introduces preparation methods for double-network hydrogels and ways to improve the mechanical properties of three typical gels. In addition to improving the mechanical properties, the biocompatibility and swelling properties of hydrogels enable them to be applied in the fields of biomedicine, intelligent sensors, and ion adsorption.

Reduction-responsive and bioorthogonal carboxymethyl cellulose based soft hydrogels cross-linked via IEDDA click chemistry for cancer therapy application

In this work, novel biocompatible and reduction-responsive soft hydrogels were formulated from norbornene (Nb)-functionalized carboxymethyl cellulose (CMCNb). To cross-link the CMC-Nb via a highly bioorthogonal inverse electron demand Diels-Alder (IEDDA) reaction, we employed a water-soluble and reduction-responsive diselenide-based cross-linker possessing two terminal tetrazine (Tz) groups with varying molar concentrations (Nb/Tz molar ratios of 10/10, 10/05, and 10/2.5). The N₂ microbubbles liberated as a by-product during the IEDDA reaction generated in-situ pores in hydrogel networks. The resulting hydrogels had highly porous structures and relatively soft mechanical properties (storage moduli in the range 74 ⁓160 Pa). The hydrogels showed high swelling ratios (>35 times), tunable gelation times (1-5 min), and excellent doxorubicin (DOX) loading efficiencies (>85 %). The hydrogels exhibited stimuli-responsive and fast release of DOX (99 %, after 12 h) in the presence of 10 mmol of glutathione as compared to the normal PBS solution (38 %). The cytotoxic effects of blank hydrogels were not observed against HEK-239 cells, while the DOX-encapsulated hydrogels exhibited anti-tumor activity in BT-20 cancer cells. The results indicate potential applications of the CMC-based soft hydrogels in injectable drug delivery systems.

Mapping hierarchical networks of poly(vinyl alcohol)/cellulose nanofiber composite hydrogels via viscoelastic probes

Discriminating the roles of different networks in the multiply cross-linked hydrogels is vital to optimize their overall performance. Poly(vinyl alcohol)/cellulose nanofiber composite hydrogels were used as template for the study. Three types of characteristic networks, including chemical network cross-linked with boronic ester bonds, physical network cross-linked with microcrystallites, and coexistence of these two networks, were constructed in the system, and the viscoelastic responses were used to detect the characteristic relaxation behavior of those networks. The physical network is more sensitive to stress-induced deformation, whereas the chemical network more sensitive to strain-induced one. The former has lower level of viscous dissipation and higher level of elastic storage as compared to the latter, and dominates linear viscoelasticity of hydrogels as the two networks coexist. Their synergistic effect can be well defined by the scaling behavior of hysteretic work. This work proposes an interesting method of probing networks in the multiply cross-linked hydrogels.

Nanomaterial based PVA nanocomposite hydrogels for biomedical sensing: Advances toward designing the ideal flexible/wearable nanoprobes

In today's world, the progress of wearable tools has gained increasing momentum. Notably, the demand for stretchable strain sensors has considerably increased owing to various potential and emerging applications like human motion monitoring, soft robotics, prosthetics, and electronic skin. Hydrogels possess excellent biocompatibility, flexibility, and stretchability that render them ideal candidates for flexible/wearable substrates. Among them, enormous efforts were focused on the progress of polyvinyl alcohol (PVA) hydrogels to realize multifunctional wearable sensing through using additives/nanofillers/functional groups to modify the hydrogel network. Herein, this review offers an up-to-date and comprehensive summary of the research progress of PVA hydrogel-based wearable sensors in view of their properties, strain sensory efficiency, and potential applications, followed by specifically highlighting their probes using metallic/non-metallic, liquid metal (LM), 2D materials, bio-nanomaterials, and polymer nanofillers. Indeed, flexible electrodes and strain/pressure sensing performance of designed PVA hydrogels for their effective sensing are described. The representative cases are carefully selected and discussed regarding the construction, merits and demerits, respectively. Finally, the necessity and requirements for future advances of conductive and stretchable hydrogels engaged in the wearable strain sensors are also presented, followed by opportunities and challenges.

Superabsorbent cellulose-based hydrogels cross-liked with borax

Cellulose, the most abundant biopolymer on Earth, has been widely attracted owing to availability, intoxicity, and biodegradability. Environmentally friendly hydrogels were successfully prepared from water hyacinth-extracted cellulose using a dissolution approach with sodium hydroxide and urea, and sodium tetraborate decahydrate (borax) was used to generate cross-linking between hydroxyl groups of cellulose chains. The incorporation of borax could provide the superabsorbent feature into the cellulose hydrogels. The uncross-linked cellulose hydrogels had a swelling ratio of 325%, while the swelling ratio of the cross-linked hydrogels could achieve ~ 900%. With increasing borax concentrations, gel fraction of the cross-linked hydrogels increased considerably. Borax also formed char on cellulose surfaces and generated water with direct contact with flame, resulting in flame ignition and propagation delay. Moreover, the cross-linked cellulose-based hydrogels showed antibacterial activity for gram-positive bacteria (S. aureus). The superabsorbent cross-linked cellulose-based hydrogels prepared in this work could possibly be used for wound dressing, agricultural, and flame retardant coating applications.

3D Conducting Polymeric Membrane and Scaffold Saccharomyces cerevisiae Biofilms to Enhance Energy Conversion in Microbial Fuel Cells

Microbial fuel cells (MFCs) can spontaneously convert chemical energy into electricity using biocatalytic microorganisms and organic matter as fuel feedstocks. Three-dimensional cross-linked poly(vinyl alcohol)-based membranes were produced by a sol-gel method under homogeneous catalysis and used as the electrolyte to facilitate effective proton conduction. Under dry conditions, these polymeric membranes showed high water uptake (120%) and ionic conductivity (2.815 mS cm^-1). In the anode compartment, the scaffold Saccharomyces cerevisiae film biocatalysts were used to improve electron transfer to the cathode, using three major configurations to generate a higher power output. It was found that the graphene anchoring, red light (RL) stimulation, and methylene blue (MB) mediation-enhanced device performance. The electrochemically derived graphene improved the power and current density by 40% because of its high conductivity. The RL stimulation increased the power density by 80% because of a shortened electron flow path to complex III. The MB mediation also yielded a higher current density by 340% because MB can bypass the electron flow from complex II to cytochrome c and transfer electrons directly to complex III. The individual and collective increase in power output was due to more efficient electron flow from the electronic network permeating the biofilm. The generated electrons were transferred either to graphene as an energy-efficient direct transfer mode or to methylene blue as a long-range redox mediator for indirect transfer. Red light stimulation enhanced oxygen utilization efficiency and stimulated electrons in redox proteins enhancing electron flux. These processes generated higher power through the more efficient generation of electrons and faster transport to the external circuit. As society migrates from gasoline consumption to low carbon-based fuels, the MFCs become important in producing electrical energy with low net emissions.

Chitosan-based double cross-linked ionic hydrogels as a strain and pressure sensor with broad strain-range and high sensitivity

A conductive hydrogel P(AAm-co-AA)/CS-Fe³⁺ with double cross-linked networks was fabricated using a one-step polymerization by UV irradiation and a soaking process in Fe(NO₃)₃ solution. In this hydrogel, the rigid chain of chitosan (CS) and the soft chain of copolymer P(AAm-co-AA) with acrylic acid (AA) and acrylamide (AAm) act as the backbone, among which large amounts of hydrogen bonds are formed by the amino, hydroxyl, and carboxyl groups on the two polymers. Ferric irons (Fe³⁺) are introduced and form coordination interactions with carboxyl and amino groups of the polymers. The double cross-linked interactions in the system can enhance the tensile strength and toughness of the hydrogel. Thus, the prepared P(AAm-co-AA)/CS-Fe³⁺ hybrid network hydrogel shows excellent mechanical properties in many aspects: a strength of up to 550 kPa, a broad strain-range up to 800%, fast self-recovery ability (30 min), and low hysteresis strain (<100%). The conductive hydrogel demonstrates high strain sensitivity (gauge factor (GF) = 6.6 at a strain of 700%) as a flexible sensor. Human movements (for example, finger bending, vocal cord vibration, and other human activities) can be sensitively detected using the P(AAm-co-AA)/CS-Fe³⁺ hydrogel sensor.

Preparation and characterisation of graphene oxide containing block copolymer worm gels

This paper reports a generic method for preparing reinforced nanocomposite worm-gels. Aqueous poly(glycerol monomethacrylate)-b-poly(2-hydroxypropyl methacrylate) (PGMA-PHPMA) and methanolic poly(glycerol monomethacrylate)-b-poly(benzyl methacrylate) (PGMA-PBzMA) worm gels were prepared by RAFT-mediated polymerisation-induced self-assembly (PISA). The former system undergoes a reversible worm-to-sphere degelation transition upon cooling to 5 °C whilst the latter system undergoes the same transition on heating to 56 °C. This transition allows these copolymer dispersions to be readily mixed with graphene oxide (GO) whilst in a low viscosity state and form nanocomposite gels on returning to room temperature via a sphere-to-worm transition. Various quantities of GO were added to the studied copolymer dispersions at a fixed copolymer content of 15% w/w. A general trend was observed whereby relatively small quantities of GO caused the gel strength of the nanocomposite gel to be higher than that of the pristine worm-gel, as determined by oscillatory rheology. Additional quantities of GO resulted in gel weakening or prevented gel-reformation altogether. For instance, 15% w/w PGMA₅₂-PHPMA₁₃₀ worm gels had a storage modulus (G') of approximately 1.5 kPa. The addition of 1.5% w/w GO based on the copolymer caused G' to increase to approximately 4.0 kPa but >1.5% w/w GO resulted in gel strengths <1.0 kPa. A combination of aqueous electrophoresis and transmission electron microscopy measurements were used to investigate the mechanism of nanocomposite gel formation. It was observed that the PGMA-based copolymers readily absorb onto the surface of GO. Thus, the role of GO is both to strengthen the worm-gels when an optimal concentration of GO is used, but also prevent worm-reformation if too much copolymer becomes absorbed on the surface of the sheets.

Research progress of smart response composite hydrogels based on nanocellulose

In recent years, smart-responsive nanocellulose composite hydrogels have attracted extensive attention due to their unique porous substrate, hydrophilic properties, biocompatibility and stimulus responsiveness. At present, the research on smart response nanocellulose composite hydrogel mainly focuses on the selection of composite materials and the construction of internal chemical bonds. The common composite materials and connection methods used for preparation of smart response nanocellulose composite hydrogels are compared according to the different types of response sources such as temperature, pH and so on. The response mechanisms and the application prospects of different response types of nanocellulose composite hydrogels are summarized, and the transformation of internal ions, functional groups and chemical bonds, as well as the changes in mechanical properties such as modulus and strength are discussed. Finally, the shortcomings and application prospects of nanocellulose smart response composite hydrogels are summarized and prospected.

Crystalline polysaccharides: A review

The biodegradability and mechanical properties of polysaccharides are dependent on their architecture (linear or branched) as well as their crystallinity (size of crystals and crystallinity percent). The amount of crystalline zones in the polysaccharide significantly governs their ultimate properties and applications (from packaging to biomedicine). Although synthesis, characterization, and properties of polysaccharides have been the subject of several review papers, the effects of crystallization kinetics and crystalline domains on the properties and application have not been comprehensively addressed. This review places focus on different aspects of crystallization of polysaccharides as well as applications of crystalline polysaccharides. Crystallization of cellulose, chitin, chitosan, and starch, as the main members of this family, were discussed. Then, application of the aforementioned crystalline polysaccharides and nano-polysaccharides as well as their physical and chemical interactions were overviewed. This review attempts to provide a complete picture of crystallization-property relationship in polysaccharides.

Lignin reinforced hydrogels with multi-functional sensing and moist-electric generating applications

Hydrogels, including PVA hydrogels, have numerous applications in many fields; however, their poor mechanical strength limits their utilization potential. Lignin, the most abundant aromatic biopolymer in nature from lignocellulosic biomass, is presently under-utilized. Herein, we used lignin to improve strength and impart pH-responsive properties of PVA hydrogel. The lignin reinforced PVA (LRP) hydrogel has a maximum storage modulus of 83.1 kPa, which is much higher than the PVA hydrogel. The LRP hydrogel exhibits great ionic conductivity, mechanical properties, and strain-sensitivity even at -30 °C. The LRP hydrogel is subsequently applied for a moisture-induced electric generator, which delivers a voltage output of 226.6 mV from moisture flow. The eco-friendly, pH responsive, high antifreezing, ionic conductive, strain sensitive, and moist-electric generating hydrogels have potential applications in many fields, including biomedicine, flexible electrodes, pH-responsive switch, strain sensor, and next-generation self-powered device systems.

Cellulose nanofibril as a crosslinker to reinforce the sodium alginate/chitosan hydrogels

Hydrogels derived from natural polymers have received great attention, but their practical applications are severely hindered by the relatively poor mechanical properties. In this work, cellulose nanofibril (CNF) was used as a crosslinker to reinforce the sodium alginate (SA)/chitosan (CS) hydrogels for drug sustained release. The CNF was prepared via a combined process of ball milling and deep eutectic solvents (DESs) pretreatment and characterized using SEM, FT-IR, and XRD. Furthermore, the microstructure, mechanical/biological properties and swelling performance of SA/CS/CNF hydrogels were investigated. Results showed that 1.0 wt% CNF addition led to the increases of 23.6% in storage modulus and 54.4% in loss modulus for the SA/CS/CNF hydrogels, indicating that CNF addition was effective in reinforcing the three-dimensional entangled networks of the hydrogels. Moreover, the presence of CNF was found to weaken the swelling performance of SA/CS/CNF hydrogels. When the synthesized SA/CS/CNF hydrogel with 1.0 wt% CNF was applied as a carrier for drug release, 50.8% reduction in the release rate in simulated gastric juice was achieved, demonstrating its outstanding sustained release properties. This work suggested that CNF might be conducive to enhancing the properties of SA/CS hydrogels, which can serve as an ideal polymeric carrier for drug release.

Self-Recovery, Fatigue-Resistant, and Multifunctional Sensor Assembled by a Nanocellulose/Carbon Nanotube Nanocomplex-Mediated Hydrogel

Flexible sensors have attracted great research interest due to their applications in artificial intelligence, wearable electronics, and personal health management. However, due to the inherent brittleness of common hydrogels, preparing a hydrogel-based sensor integrated with excellent flexibility, self-recovery, and antifatigue properties still remains a challenge to date. In this study, a type of physically and chemically dual-cross-linked conductive hydrogels based on 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofiber (TOCN)-carrying carbon nanotubes (CNTs) and polyacrylamide (PAAM) matrix via a facial one-pot free-radical polymerization is developed for multifunctional wearable sensing application. Inside the hierarchical gel network, TOCNs not only serve as the nanoreinforcement with a toughening effect but also efficiently assist the homogeneous distribution of CNTs in the hydrogel matrix. The optimized TOCN-CNT/PAAM hydrogel integrates high compressive (∼2.55 MPa at 60% strain) and tensile (∼0.15 MPa) strength, excellent intrinsic self-recovery property (recovery efficiency >92%), and antifatigue capacity under both cyclic stretching and pressing. The multifunctional sensors assembled by the hydrogel exhibit both high strain sensitivity (gauge factor ≈11.8 at 100-200% strain) and good pressure sensing ability over a large pressure range (0-140 kPa), which can effectively detect the subtle and large-scale human motions through repeatable and stable electrical signals even after 100 loading-unloading cycles. The comprehensive performance of the TOCN-CNT/PAAM hydrogel-based sensor is superior to those of most gel-based sensors previously reported, indicating its potential applications in multifunctional sensing devices for healthcare systems and human motion monitoring.

Synthesis and characterization of electroconductive hydrogels based on oxidized alginate and polypyrrole-grafted gelatin as tissue scaffolds

Electroconductive biocompatible hydrogels with tunable properties have extensively been taken into account in tissue engineering applications due to their potential to provide suitable microenvironmental responses for the cells. In the present study, novel electroconductive hydrogels are designed and synthesized by reacting oxidized alginate with polypyrrole-grafted gelatin copolymer (PPy-g-gelatin) via formation of a Schiff-base linkage. The influence of the composition and the concentration of the components on the compressive modulus and functional performance of the hydrogels is investigated. The conductivity of the hydrogels measured by a two-probe method increased by increasing the level of polypyrrole-grafted gelatin, and a conductivity of 0.7753 S m^-1 was exhibited by the hydrogel composed of 8% w/v polypyrrole-grafted gelatin (oxidized alginate:gelatin:polypyrrole-grafted gelatin; 30 : 35 : 35% v/v). The hydrogel compressive modulus was shown to be enhanced by increasing the total concentration of hydrogel. The characteristic features of the prepared hydrogels, including swelling ratio, volume fraction, cross-link density, and mesh size, are also studied and analyzed. Besides, the conductive hydrogels have a smaller mesh size and higher cross-link density than the non-conductive hydrogels. However, the hydrogels with high cross-link density, small mesh size, and large pore size presented higher electroconductivity as a result of easier movement of the ions throughout the hydrogel. These conductive hydrogels exhibited electrical conductivity and biodegradability with cell viability, implying potential as scaffolds for tissue engineering.

Functional Properties of Two-Component Hydrogel Systems Based on Gelatin and Polyvinyl Alcohol-Experimental Studies Supported by Computational Analysis

The presented research is focused on an investigation of the effect of the addition of polyvinyl alcohol (PVA) to a gelatin-based hydrogel on the functional properties of the resulting material. The main purpose was to experimentally determine and compare the properties of hydrogels differing from the content of PVA in the blend. Subsequently, the utility of these matrices for the production of an immobilized invertase preparation with improved operational stability was examined. We also propose a useful computational tool to predict the properties of the final material depending on the proportions of both components in order to design the feature range of the hydrogel blend desired for a strictly specified immobilization system (of enzyme/carrier type). Based on experimental research, it was found that an increase in the PVA content in gelatin hydrogels contributes to obtaining materials with a visibly higher packaging density, degree of swelling, and water absorption capacity. In the case of hydrolytic degradation and compressive strength, the opposite tendency was observed. The functionality studies of gelatin and gelatin/PVA hydrogels for enzyme immobilization indicate the very promising potential of invertase entrapped in a gelatin/PVA hydrogel matrix as a stable biocatalyst for industrial use. The molecular modeling analysis performed in this work provides qualitative information about the tendencies of the macroscopic parameters observed with the increase in the PVA and insight into the chemical nature of these dependencies.

Development of dual crosslinked mumio-based hydrogel dressing for wound healing application: Physico-chemistry and antimicrobial activity

In this study, an antimicrobial mumio-based hydrogel dressing was developed for wound healing application. The mechanism of gel formation was achieved via a double crosslink network formation between gelatin (GT) and polyvinyl alcohol (PVA) using polyethylene glycol diglycidyl ether (PEGDE) and borax as crosslinking agents. To enhance the mechanical integrity of the hydrogel matrix, bacterial cellulose (BC) was integrated into the GT-PVA hydrogel to produce a composite gel dressing. The obtained hydrogel was characterized by FTIR, SEM, TGA, and XRD. Gel fraction, in vitro swelling and degradation as well as compressive modulus properties of the gel dressing were investigated as a function of change in PVA and BC ratios. By increasing the ratios of PVA and BC, the composite dressing showed lower swelling but higher mechanical strength. Comparing to other formulations, the gel with 4 %w/v PVA and 1 %w/v BC demonstrated to be most suitable in terms of stability and mechanical properties. In vitro cell cytotoxicity by MTT assay on human alveolar basal epithelial (A549) cell lines validated the gels as non-toxic. In addition, the mumio-based gel was compared to other formulations containing different bioactive agents of beeswax and cinnamon oil, which were tested for microbial growth inhibition effects against different bacteria (S. aureus and K. pneumoniae) and fungi (C. albicans and A. niger) strains. Results suggested that the gel dressing containing combinations of mumio, beeswax and cinnamon oil possess promising future in the inhibition of microbial infection supporting its application as a suitable dressing for wound healing.

Advanced Functional Materials Based on Nanocellulose for Pharmaceutical/Medical Applications

Nanocelluloses (NCs), with their remarkable characteristics, have proven to be one of the most promising "green" materials of our times and have received special attention from researchers in nanomaterials. A diversity of new functional materials with a wide range of biomedical applications has been designed based on the most desirable properties of NCs, such as biocompatibility, biodegradability, and their special physicochemical properties. In this context and under the pressure of rapid development of this field, it is imperative to synthesize the successes and the new requirements in a comprehensive review. The first part of this work provides a brief review of the characteristics of the NCs (cellulose nanocrystals-CNC, cellulose nanofibrils-CNF, and bacterial nanocellulose-BNC), as well as of the main functional materials based on NCs (hydrogels, nanogels, and nanocomposites). The second part presents an extensive review of research over the past five years on promising pharmaceutical and medical applications of nanocellulose-based materials, which have been discussed in three important areas: drug-delivery systems, materials for wound-healing applications, as well as tissue engineering. Finally, an in-depth assessment of the in vitro and in vivo cytotoxicity of NCs-based materials, as well as the challenges related to their biodegradability, is performed.

A bio-inspired self-recoverable polyampholyte hydrogel with low temperature sensing

Hydrogel-based flexible sensors have been extensively investigated, but inevitably, some hydrogels will not work properly at low temperature or recover their original property after deformation. In this work, a polyampholyte hydrogel was successfully prepared by introducing zwitterionic monomers with hydrophobic association. The electrostatic interaction based on polyelectrolyte provides excellent stretchability, fatigue resistance and self-recovery. It was important that the hydrogel, as an excellent strain sensor, exhibited a high electrical conductivity of 0.041 S cm-1, a low temperature resistance of -31.7 °C, and a high sensitivity in the strain range of 0-500%. The hydrogel sensor is used for human motion detection, including joint movement, vocalization, and walking. Predictably, the hydrogel will provide stable performance in a complex temperature environment and exhibited a wide range of applications in physiological signal monitoring, electronic skin and soft robots.

Dynamic nanocellulose hydrogels: Recent advancements and future outlook

Nanocellulose is of great interest in material science nowadays mainly because of its hydrophilic, renewable, biodegradable, and biocompatible nature, as well as its excellent mechanical strength and tailorable surface ready for modification. Currently, nanocellulose is attracting attention to overcome the current challenges of dynamic hydrogels: robustness, autonomous self-healing, and self-recovery (SELF) properties simultaneously occurring in one system. In this regard, this review aims to explore current advances in design and fabrication of dynamic nanocellulose hydrogels and elucidate how incorporating nanocellulose with dynamic motifs simultaneously improves both SELF and robustness of hydrogels. Finally, current challenges and prospects of dynamic nanocellulose hydrogels are discussed.