Removal characteristics of pharmaceuticals and personal care products: Comparison between membrane bioreactor and various biological treatment processes

Advances and solutions in biological treatment for antibiotic wastewater with resistance genes: A review

Biological treatment represents a fundamental component of wastewater treatment plants (WWTPs). The transmission of antibiotic resistance bacteria (ARB) and resistance genes (ARGs) occurred through the continuous migration and transformation, attributed to the residual presence of antibiotics in WWTPs effluent, posing a significant threat to the entire ecosystem. It is necessary to propose novel biological strategies to address the challenge of refractory contaminants, such as antibiotics, ARGs and ARB. This review summarizes the occurrence of antibiotics in wastewater, categorized by high and low concentrations. Additionally, current biological treatments used in WWTPs, such as aerobic activated sludge, anaerobic digestion, sequencing batch reactor (SBR), constructed wetland, membrane-related bioreactors and biological aerated filter (BAF) are introduced. In particular, because microorganisms are the key to those biological treatments, the effect of high and low concentration of antibiotics on microorganisms are thoroughly discussed. Finally, solutions involving functional bacteria, partial nitrification (PN)-Anammox and lysozyme embedding are suggested from the perspective of the entire biological treatment process. Overall, this review provides valuable insights for the simultaneous removal of antibiotics and ARGs in antibiotics wastewater.

Evaluation of pharmaceutical consumption between urban and suburban catchments in China by wastewater-based epidemiology

Wastewater-based epidemiology (WBE) is amply used for estimating human consumption of chemicals, yet information on regional variation of pharmaceuticals and their environmental fate are scarce. Thus, this study aims to estimate the consumption of three cardiovascular, four non-steroidal anti-inflammatory pharmaceuticals (NSAIDs), and four psychoactive pharmaceuticals between urban and suburban catchments in China by WBE, and to explore their removal efficiencies and ecological risks. Eleven analytes were detected in both influent and effluent samples. The estimated consumptions ranged from Collapse

Key Words

• Ecological risks
• Pharmaceutical usage
• Regional variation
• Removal efficiency
• Wastewater treatment plant

Collapse

MESH Headings

• China
• Water Pollutants, Chemical/analysis
• Wastewater/analysis
• Wastewater/chemistry
• Pharmaceutical Preparations/analysis
• Cities
• Humans
• Risk Assessment
• Anti-Inflammatory Agents, Non-Steroidal/analysis
• Environmental Monitoring
• Wastewater-Based Epidemiological Monitoring
• Psychotropic Drugs/analysis

Collapse

Grants Collapse

Affiliation(s)

Zongrui Li State Environmental Protection Key Laboratory of Environmental Pollution Health Risk Assessment, South China Institute of Environmental Sciences, Ministry of Ecology and Environment, Guangzhou, 510655, China
Jincheng Li State Environmental Protection Key Laboratory of Environmental Pollution Health Risk Assessment, South China Institute of Environmental Sciences, Ministry of Ecology and Environment, Guangzhou, 510655, China
Yongxia Hu West Center, Guangzhou Institute of Chemistry, Chinese Academy of Sciences, Chongqing, 400714, China
Yile Yan State Environmental Protection Key Laboratory of Environmental Pollution Health Risk Assessment, South China Institute of Environmental Sciences, Ministry of Ecology and Environment, Guangzhou, 510655, China
Shaoyu Tang Research Center for Eco-Environmental Engineering, School of Environment and Civil Engineering, Dongguan University of Technology, Dongguan, 523808, China
Ruixue Ma State Environmental Protection Key Laboratory of Environmental Pollution Health Risk Assessment, South China Institute of Environmental Sciences, Ministry of Ecology and Environment, Guangzhou, 510655, China
Liangzhong Li State Environmental Protection Key Laboratory of Environmental Pollution Health Risk Assessment, South China Institute of Environmental Sciences, Ministry of Ecology and Environment, Guangzhou, 510655, China; CAS Key Laboratory of Renewable Energy, Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou, 510640, China.

Collapse

Unveiling the influence of microaeration and sludge recirculation on enhancement of pharmaceutical removal and microbial community change of the novel anaerobic baffled biofilm - membrane bioreactor in treating building wastewater

This research aims to conduct a comparative investigation of the role played by microaeration and sludge recirculation in the novel anaerobic baffled biofilm-membrane bioreactor (AnBB-MBR) for enhancing pharmaceutical removal from building wastewater. Three AnBB-MBRs - R1: AnBB-MBR, R2: AnBB-MBR with microaeration and R3: AnBB-MBR with microaeration and sludge recirculation - were operated simultaneously to remove Ciprofloxacin (CIP), Caffeine (CAF), Sulfamethoxazole (SMX) and Diclofenac (DCF) from real building wastewater at the hydraulic retention time (HRT) of 30 h for 115 days. From the removal profiles of the targeted pharmaceuticals in the AnBB-MBRs, it was found that the fixed-film compartment (C1) could significantly reduce the targeted pharmaceuticals. The remaining pharmaceuticals were further removed with the microaeration compartment. R2 exhibited the utmost removal efficiency for CIP (78.0 %) and DCF (40.8 %), while SMX was removed most successfully by R3 (microaeration with sludge recirculation) at 91.3 %, followed by microaeration in R2 (88.5 %). For CAF, it was easily removed by all AnBB-MBR systems (>90 %). The removal mechanisms indicate that the microaeration in R2 facilitated the adsorption of CIP onto microaerobic biomass, while the enhanced biodegradation of CAF, SMX and DCF was confirmed by batch biotransformation kinetics and the adsorption isotherms of the targeted pharmaceuticals. The microbial groups involved in biodegradation of the targeted compounds under microaeration were identified as nitrogen removal microbials (Nitrosomonas, Nitrospira, Thiobacillus, and Denitratisoma) and methanotrophs (Methylosarcina, Methylocaldum, and Methylocystis). Overall, explication of the integration of AnBB-MBR with microaeration (R2) confirmed it as a prospective technology for pharmaceutical removal from building wastewater due to its energy-efficient approach characterized by minimal aeration supply.

Occurrence and fate of pharmaceuticals and personal care products in a wastewater treatment plant with Bacillus bio-reactor treatment

Pharmaceuticals and personal care products (PPCPs) have attracted wide attention due to their environmental impacts and health risks. PPCPs released through wastewater treatment plants (WWTPs) are estimated to be 80 %. Nevertheless, the occurrence of PPCPs in the WWTPs equipped with Bacillus spec.-based bioreactors (BBR) treatment system remains unclear. In this study, sludge and waste water samples were collected during separate winter and summer sampling campaigns from a typical BBR treatment system. The results indicate that out of 58 target PPCPs, 27 compounds were detected in the waste water (0.06-1900 ng/L), and 23 were found in the sludge (0.6-7755 ng/g dw). Paraxanthine was the chemical of the highest abundance in the influent due to the high consumption of the parent compounds caffeine and theobromine. The profile for PPCPs in the wastewater and sludge exhibited no seasonal variation. Overall, the removal of target PPCPs in summer is more effective than the winter. In the BBR bio-reactor, it was found that selected PPCPs (at ng/L level) can be completely removed. The efficiency for individual PPCP removal was increased from 1.0 % to 50 % in this unit, after target specific adjustments of the process. The effective removal of selected PPCPs by the BBR treatment system is explained by combined sorption and biodegradation processing. The re-occurrence of PPCPs in the wastewater was monitored. Negative removal efficiency was explained by the cleavage of Phase II metabolites after the biotransformation process, and the lack of equilibrium for PPCPs in the sludge of the second clarifier. A compound specific risk quotient (RQ) was calculated and applied for studying the potential environmental risks. Diphenhydramine is found with the highest environmental risk in wastewater, and 15 other PPCPs show negligible risks in sewage sludge.

Comprehensive analysis of a widely pharmaceutical, furosemide, and its degradation products in aquatic systems: Occurrence, fate, and ecotoxicity

Many pharmaceutical compounds end up in the environment due to incomplete removal by wastewater treatment plants (WWTPs). Some compounds are sometimes present in significant concentrations and therefore represent a risk to the aquatic environment. Furosemide is one of the most widely used drugs in the world. Considered as an essential drug by the World Health Organization, this powerful loop diuretic is used extensively to treat hypertension, heart and kidney failure and many other purposes. However, this important consumption also results in a significant release of furosemide in wastewater and in the receiving environment where concentrations of a few hundred ng/L to several thousand have been found in the literature, making furosemide a compound of great concern. Also, during its transport in wastewater systems and WWTPs, furosemide can be degraded by various processes resulting in the production of more than 74 by-products. Furosemide may therefore present a significant risk to ecosystem health due not only to its direct cytotoxic, genotoxic and hepatotoxic effects in animals, but also indirectly through its transformation products, which are poorly characterized. Many articles classify furosemide as a priority pollutant according to its occurrence in the environment, its persistence, its elimination by WWTPs, its toxicity and ecotoxicity. Here, we present a state-of-the-art review of this emerging pollutant of interest, tracking it, from its consumption to its fate in the aquatic environment. Discussion points include the occurrence of furosemide in various matrices, the efficiency of many processes for the degradation of furosemide, the subsequent production of degradation products following these treatments, as well as their toxicity.

Enhancement of Peroxydisulfate Activation for Complete Degradation of Refractory Tetracycline by 3D Self-Supported MoS2/MXene Nanocomplex

Antibiotic abuse, particularly the excessive use of tetracycline (TC), a drug with significant environmental risk, has gravely harmed natural water bodies and even posed danger to human health. In this study, a three-dimensional self-supported MoS2/MXene nanohybrid with an expanded layer spacing was synthesized via a facile one-step hydrothermal method and used to activate peroxydisulfate (PDS) for the complete degradation of TC. The results showed that a stronger •OH signal was detected in the aqueous solution containing MoS2/MXene, demonstrating a superior PDS activation effect compared to MoS2 or Ti3C2TX MXene alone. Under the conditions of a catalyst dosage of 0.4 g/L, a PDS concentration of 0.4 mM, and pH = 5.0, the MoS2/MXene/PDS system was able to fully eliminate TC within one hour, which was probably due to the presence of several reactive oxygen species (ROS) (•OH, SO4•-, and O2•-) in the system. The high TC degradation efficiency could be maintained under the influence of various interfering ions and after five cycles, indicating that MoS2/MXene has good anti-interference and reusability performance. Furthermore, the possible degradation pathways were proposed by combining liquid chromatography-mass spectrometry (LC-MS) data and other findings, and the mechanism of the MoS2/MXene/PDS system on the degradation process of TC was elucidated by deducing the possible mechanism of ROS generation in the reaction process. All of these findings suggest that the MoS2/MXene composite catalyst has strong antibiotic removal capabilities with a wide range of application prospects.

Evaluation of virus removal in membrane bioreactor (MBR) and conventional activated sludge (CAS) processes based on long-term monitoring at two wastewater treatment plants

The membrane bioreactor (MBR) process always offers better wastewater treatment than conventional activated sludge (CAS) treatment. However, the difference in their efficacy of virus reduction remains unknown. To investigate this, we monitored virus concentrations before and after MBR and CAS processes over 2 years. Concentrations of norovirus genotypes I and II (NoV GI and GII), aichivirus (AiV), F-specific RNA phage genotypes I, II, and III (GI-, GII-, and GIII-FRNAPHs), and pepper mild mottle virus (PMMoV) were measured by a quantitative polymerase chain reaction (qPCR) method at two municipal wastewater treatment plants (WWTPs A and B) in Japan. Virus concentration datasets containing left-censored data were estimated by using both maximum likelihood estimation (MLE) and robust regression on order statistics (rROS) approaches. PMMoV was the most prevalent at both WWTPs, with median concentrations of 7.5 to 8.8 log10 copies/L before treatment. Log10 removal values (LRVs) of all viruses based on means and standard deviations of concentrations before and after treatment were consistently higher following MBR than following CAS. We used NoV GII as a model pathogen in a quantitative microbial risk assessment of the treated water, and we estimated the additional reductions required following MBR and CAS processes to meet the guideline of 10-6 DALYs pppy for safe wastewater reuse.

Advances in identifying and managing emerging contaminants in aquatic ecosystems: Analytical approaches, toxicity assessment, transformation pathways, environmental fate, and remediation strategies

Emerging contaminants (ECs) are increasingly recognized as threats to human health and ecosystems. This review evaluates advanced analytical methods, particularly mass spectrometry, for detecting ECs and understanding their toxicity, transformation pathways, and environmental distribution. Our findings underscore the reliability of current techniques and the potential of upcoming methods. The adverse effects of ECs on aquatic life necessitate both in vitro and in vivo toxicity assessments. Evaluating the distribution and degradation of ECs reveals that they undergo physical, chemical, and biological transformations. Remediation strategies such as advanced oxidation, adsorption, and membrane bioreactors effectively treat EC-contaminated waters, with combinations of these techniques showing the highest efficacy. To minimize the impact of ECs, a proactive approach involving monitoring, regulations, and public education is vital. Future research should prioritize the refining of detection methods and formulation of robust policies for EC management.

Localized pollution of veterinary antibiotics in watersheds receiving treated effluents from swine farms

Swine excrement is discharged into surface waters mainly as effluent in Asian countries. As swine production consumes more antibiotics and less water than humans, a mismatch of the size of swine farms and that of the rivers receiving their effluent could create severe pollution by antibiotics. However, little is known about the occurrence of antibiotics in such rivers. We therefore monitored seven veterinary drugs, six human drugs (including a metabolite), three drugs for both use (including a metabolite), and major water qualities at 30 sites in Japanese watersheds where swine outnumber humans and where their excrement is largely treated on-site by aerobic biological wastewater processes. The compositions of veterinary drugs differed substantially among sites, unlike human drugs, indicating various patterns of use among swine farms. Median concentrations at the 30 sites were <1 ng/L for seven out of the ten drugs used in livestock, whereas maximum concentrations were >1000 ng/L for three and 100-1000 ng/L for four of them, giving median-maximum among the sites of >3 log for two and 2-3 log for six of them. The spatial distribution ranges of concentrations of veterinary drugs were wider than those of human drugs (mostly <1.5 log) and other analytes (mostly <1 log), despite the correlation between those of total veterinary drugs and nitrogen, attributable to fewer swine farms than households, the intensive animal husbandry, and the various drug-use patterns among the farms. The range of maximum concentrations of veterinary drugs in the watersheds was comparable to those reported in other Asian watersheds with less strict management of swine excrement, attributable to their slow decay in conventional wastewater treatment on swine farms. Thus, attention should be paid to hot-spot pollution of antibiotics on large Asian swine farms adjacent to streams with limited dilution capacity.

Occurrence and removal rate of typical pharmaceuticals and personal care products (PPCPs) in an urban wastewater treatment plant in Beijing, China

The occurrence and removal rate of 52 typical pharmaceuticals and personal care products (PPCPs) were investigated in a wastewater treatment plant in Beijing, China. Thirty-three PPCPs were found in the influent, with caffeine (CF, 11387.0 ng L-1) being the most abundant, followed by N,N-diethyl-meta-toluamide (DEET, 9568.4 ng L-1), metoprolol (MTP, 930.2 ng L-1), and diclofenac (DF, 710.3 ng L-1). After treatment processes, the cumulative concentration of PPCPs decreased from 2.54 × 104 ng L-1 to 1.44 × 103 ng L-1, with the overall removal efficiency (RE) of 94.3%. Different treatment processes showed varying contributions in removing PPCPs. PPCPs were efficiently removed in sedimentation, anoxic, and ultraviolet units. For individual compounds, a great variation in RE (52.1-100%) was observed. Twenty-two PPCPs were removed by more than 90%. The highly detected PPCPs in the influent were almost completely removed. Aerated grit chamber removed nearly 50% of fluoroquinolone (FQs) and more than 60% of sulfonamides. Most PPCPs showed low or negative removals during anaerobic treatment, except for CF which was eliminated by 64.9%. Anoxic treatment demonstrated positive removals for most PPCPs, with the exceptions of DF, MTP, bisoprolol, carbamazepine (CBZ), and sibutramine. DEET and bezafibrate were efficiently removed during the secondary sedimentation. Denitrification biological filter and membrane filtration also showed positive effect on most PPCPs removals. The remaining compounds were oxidized by 16-100% in ozonation. DF, sulpiride, ofloxacin (OFL), trimethoprim, and phenolphthalein were not amenable to ultraviolet. After the treatment, the residue OFL, CBZ, and CF in receiving water were identified to pose high risk to aquatic organisms. Considering the complex mixtures emitted into the environment, therapeutic groups psychotropics, stimulant, and FQs were classified as high risk. These findings provide valuable insights into adopting appropriate measures for more efficient PPCPs removals, and emphasize the importance of continued monitoring specific PPCPs and mixtures thereof to safeguard the ecosystem.

Fate of emerging contaminants in a sequencing batch reactor and potential of biological activated carbon as tertiary treatment for the removal of persisting contaminants

The study aims to understand the occurrence and removal of 20 emerging contaminants (ECs) in each unit process of a sequencing batch reactor-based wastewater treatment plant (WWTP) and explore the potential of biological activated carbon (BAC) for the treatment of residual ECs and organic matter in the secondary effluent. Analgesic-acetaminophen, anti-inflammatory drug-ibuprofen, and stimulant-caffeine were detected at high concentrations in the influent. Most of the removal was observed in the biological treatment stage in the SBR basins. The mass load of the ECs was 2.93 g/d in the secondary effluent and 0.4 g/d in the final sludge, while the total removal of the mass load of ECs till the secondary treatment stage was 93.22%. 12 of the 20 ECs were removed by more than 50%, while carbamazepine (negative removal), sulfamethoxazole, and trimethoprim were removed by less than 20%. As a polishing step and to remove residual ECs, two BAC units were studied for 11,000 bed volumes (324 days). Packed column studies on granular activated carbon were conducted, and GAC development to BAC was monitored. SEM and FTIR were used to confirm and characterize the BAC. The BAC appeared to be more hydrophobic than the GAC. The BAC removed 78.4% and 40% of the dissolved ECs and organic carbon at an optimum EBCT of 25 min. Carbamazepine, sulfamethoxazole, and trimethoprim were removed by 61.5, 84, and 52.2%, respectively. Parallel column tests revealed adsorption as an important mechanism for the removal of positively charged compounds. The results indicate that the BAC is an effective tertiary/polishing technique for removing organic and micropollutants in the secondary wastewater effluent.

Hybrid hydrodynamic cavitation (HC) technique for the treatment and disinfection of lake water

Water reclamation from lakes needs to be accomplished efficiently and affordably to ensure the availability of clean, disinfected water for society. Previous treatment techniques, such as coagulation, adsorption, photolysis, ultraviolet light, and ozonation, are not economically feasible on a large scale. This study investigated the effectiveness of standalone HC and hybrid HC + H₂O₂ treatment techniques for treating lake water. The effect of pH (3 to 9), inlet pressure (4 to 6 bar), and H₂O₂ loading (1 to 5 g/L) were examined. At pH = 3, inlet pressure of 5 bar and H₂O₂ loadings of 3 g/L, maximum COD and BOD removal were achieved·H₂O₂ was observed to significantly improve the performance of the HC when used as a chemical oxidant. In an optimal operating condition, a COD removal of 54.5 % and a BOD removal of 51.5 % using HC alone for 1 h is observed. HC combined with H₂O₂ removed 64 % of both COD and BOD. The hybrid HC + H₂O₂ treatment technique resulted in a nearly 100% removal of pathogens. The results of this study indicate that the HC-based technique is an effective method for removing contaminants and disinfection of the lake water.

Occurrence and fate of an emerging drug pollutant and its by-products during conventional and advanced wastewater treatment: Case study of furosemide

Conventional wastewater treatment systems are not designed to remove pharmaceutical compounds from wastewater. These compounds can be degraded into many other transformation products which are hardly, if at all, studied. In this context, we studied the occurrence and degradation of furosemide, a very frequently detected diuretic, along with its known degradation products in several types of wastewater. Influent and effluent from the Seine-Centre Wastewater Treatment Plant (WWTP) (Paris, France) as well as outlet of residential care homes (Dordogne, France) were analyzed by Ultra-Performance Liquid Chromatography-tandem Mass Spectrometry (UPLC-MS/MS) to quantify furosemide and its known degradation products, saluamine and pyridinium of furosemide. Oxidation experiments (chlorination, ozonation and UV photolysis with hydrogen peroxide) were then performed on furosemide solutions and on water from residential care facilities to study the degradation of furosemide by potential advanced processes, and also to identify unknown oxidation products by high-resolution mass spectrometry. Furosemide was well degraded in Seine-Centre WWTP (>75%) but did not increase the concentrations of its main degradation products. Saluamine and pyridinium of furosemide were already present at similar concentrations to furosemide in the raw wastewater (∼2.5-3.5 μg.L^-1), and their removal in the WWTPs were very high (>80%). Despite their removal, the three compounds remained present in treated wastewater effluents at concentrations of hundreds of nanograms per liter. Chlorination degraded furosemide without pyridinium production unlike the other two processes. Chlorination and ozonation were also effective for the removal of furosemide and pyridinium in residential care home water, but they resulted in the production of saluamine. To our knowledge this is the first evidence of saluamine and pyridinium of furosemide in real water samples in either the particulate or dissolved phase.

Removal of Typical PPCPs by Reverse Osmosis Membranes: Optimization of Treatment Process by Factorial Design

In this paper, the removal effect of reverse osmosis (RO) on three common pharmaceuticals and personal care products (PPCPs), including ibuprofen (IBU), carbamazepine (CBZ), and triclosan (TCS), were compared under different process conditions, and the removal rate of PPCPs, membrane flux, and PPCPs membrane adsorption capacity were analyzed. The removal rate increased with the increase of the influent concentration and pre-membrane pressure, while pH influenced the removal effect of different PPCPs by affecting the electrostatic interaction between pollutants and membranes. It was also found that the dynamic adsorption of PPCPs on RO membranes under different conditions complied with the pseudo-first-order reaction kinetic adsorption model. The maximum stable adsorption capacity and the adsorption rate of PPCPs on membranes under various conditions were simulated based on the model. Moreover, through factorial design, the removal rates of RO on IBU, CBZ, and TCS could reach 98.93%, 97.47%, and 99.01%, respectively, under the optimal conditions (with an influent concentration of 500 μg/L, pre-membrane pressure of 16 bar and pH = 10). By optimizing the process of removing PPCPs with the RO membrane method, the optimal process conditions of removing IBU, CBZ, and TCS with the RO membrane method were obtained, which provided reference conditions and data support for the practical application of removing PPCPs with the RO membrane method.

Removal of emerging contaminants in conventional and advanced biological wastewater treatment plants in India-a comparison of treatment technologies

Emerging contaminants (ECs) are a growing concern for the environment and human health. The study investigates 20 commonly reported ECs in 10 wastewater treatment plants (WWTPs) in urban to semi-urban settlements of north India over two years in the summer and winter. The selected plants were based on waste stabilization pond (WSP), up-flow anaerobic sludge blanket (UASB), activated sludge process (ASP), anoxic-aerobic process (AO), anaerobic-anoxic-oxic process, biodenipho process, sequencing batch reactor, and densadeg-biofor process. Of the 20 ECs, all 20 were identified in the influent and effluent, and 13 were identified in the final sludge on at least one occasion. The concentration in the influent, effluent, and sludge varied in the range from 2.5 ng/L to 77.4 μg/L, below limit of detection (LOD) to 1.984 μg/L, and < LOD to 1.41 μg/g, respectively. Acetaminophen and caffeine were predominately detected in the influent, whereas naproxen, ciprofloxacin, and carbamazepine were predominant in the effluent. The total removal in the plants was found in the range of 40.3-68.6%, mainly attributed to biodegradation/biotransformation. Removal of ECs by WWTPs, ranked by a relative removal criterion, followed the order: Biological nutrient removal based plants > WSP > UASB > densadeg-biofor > AO > ASP > combitreat-SBR. The risk assessment showed the risk to algae from antibiotics and triclosan, daphnia from triclosan, and fish from triclosan and hormones.

Effects of particle size on the adsorption behavior and antifouling performance of magnetic resins

Adequately choosing the physicochemical characteristics of adsorbent is crucial in improving its adsorption performance. This work investigated the effect of particle size of magnetic resins on adsorption behaviors of tetracycline (TC) and their antifouling performance. Smaller particle size resin Q150 (10-30 μm) shows notably faster TC adsorption kinetics when compared resins with hundreds of microns (Q100 and Q1). Simulated by Weber-Morris equation, the film diffusion time of Q150 was only 20 min, 2-25 times faster than that of other resins. At this adsorption time, Q150 can reach more than 80% of the maximum adsorption, and the ring-like fluorescence images indicate that the molecules are accumulated on the external surface. Q150 also shows better reusability and antifouling performance over Q100 and Q1. After 20 adsorption-desorption cycles, the adsorption capacity of Q150 at 20 min only decreases 9.7%. The presence of tannic acid also only slightly decreases the adsorption capacity. The faster adsorption kinetics and the superior antifouling performance of Q150 make it a promising adsorbent in future use.

Occurrence and distribution of azithromycin in wastewater treatment plants, seawater, and sediments of the northern part of the Persian Gulf around Bushehr port: A comparison with Pre-COVID 19 pandemic

One of the environmental effects of COVID 19 is the contamination of ecosystems with antibiotics due to their high consumption to treat this disease. Many years ago, the distribution of antibiotics including azithromycin (Azi) in wastewater treatment plants in Bushehr city, seawater, and sediment of the Persian Gulf has been investigated. As Azi has been prescribed to COVID 19 patients, contamination of the environment with this drug can also be assumed. Thus, we decided to examine this hypothesis by repeating our previous study during COVID 19 period. We collected wastewater samples from influent, effluent, and different units of three wastewater treatment plants (WWTPs) including one municipal WWTP (Plant A) and two hospital-WWTPs (Plant B and C). Seawater and adjusted sediments were gathered from 8 stations located in the Persian Gulf in two seasons to evaluate the special and temporal variation. The results showed a huge growth of Azi pollution in all studied matrixes. The mean Azi values in the influent of Plant A, B, and C were 145 ng/L, 110 ng/L, and 896 ng/L, which represented an 9, 6, and 48-time increase compared with those obtained in 2017 (before COVID 19). The Azi removal efficiency had a different behavior compared to before COVID 19. The mean concentration of Azi in seawater and sediment samples was 9 ng/L and 6 ng/g, which was 3 and 4-fold higher than the previous study. Opposed to our former study, the Azi amount in the aqueous phase was less subjected to temporal seasonal variations. Our observations indicated the wide distribution of Azi in the environment and a future threat of intense growth of antibiotic resistance in ecosystems.

Mesocosm constructed wetlands to remove micropollutants from wastewater treatment plant effluent: Effect of matrices and pre-treatments

The contamination of the aquatic environment by micropollutants (MPs) brings risks for the ecosystem and human health. Constructed wetlands (CWs) were an eco-friendly technology to remove MPs from wastewater treatment plant effluent. In this study, the removal of MPs was evaluated in seven vertical flow mesocosm CWs with different configurations, including different support matrices (sand and a combination of bark-biochar), light pre-treatments (UVC and sunlight) or bioaugmentation in support matrices (activated sludge). The CWs with bark-biochar as support matrix significantly enhanced the removal of irbesartan and carbamazepine (>40 %), compared to the CW filled with the conventional support matrix sand. UVC irradiation as pre-treatment was more efficient in removing MPs than sunlight irradiation. After UVC pre-treatment, less MPs accumulated in the plants in the subsequent CW unit compared to the CW unit without any pre-treatment. Moreover, in the UVC combined CW system, less sulfamethoxazole, furosemide, mecoprop and diclofenac were accumulated in the plants (<0.5 μg) than other MPs (>3 μg). The addition of 0.5 % activated sludge combined with the aeration of influent did not improve MP removal in the CW. Considering the application, a bark-biochar based CW combined with UVC pre-treatment will result in more MP removal than a conventional sand CW.

Anaerobic membrane bioreactors for pharmaceutical-laden wastewater treatment: A critical review

Pharmaceuticalsare a diverse group of chemical compounds widely used for prevention and treatment of infectious diseases in both humans and animals. Pharmaceuticals, either in their original or metabolite form, find way into the wastewater treatment plants (WWTPs) from different sources. Recently, anaerobic membrane bioreactors (AnMBR) has received significant research attention for the treatment of pharmaceuticals in various wastewater streams. This review critically examines the behaviour and removal of a wide array of pharmaceuticals in AnMBR with primary focus on their removal efficiencies and mechanisms, critical influencing factors, and the microbial community structures. Subsequently, the inhibitory effects of pharmaceuticals on the performance of AnMBR and membrane fouling are critically discussed. Furthermore, the imperative role of membrane biofouling layer and its components in pharmaceuticals removal is highlighted. Finally, recent advancements in AnMBR configurations for membrane fouling control and enhanced pharmaceuticals removal are systemically discussed.

Fate characteristics, exposure risk, and control strategy of typical antibiotics in Chinese sewerage system: A review

In China, the sewerage system plays an essential role in antibiotic removal; however, the fate profiles of antibiotics in sewers are not well understood, and risk identification throughout the sewerage system is inadequate. Based on the extensive detection results for typical groups of antibiotics in the discharge sources, influent and effluent from wastewater treatment plants (WWTPs), and excess sludge, a comprehensive evaluation was conducted to reveal the elimination profiles of the antibiotics, identify the fate characteristics in both sewers and WWTPs, assess the exposure risk levels, and propose a control strategy. The total concentration (based on the median concentrations of the target antibiotics) in aqueous waters was estimated to decrease from 7383.4 ng/L at the discharge source to 886.6 ng/L in the WWTP effluent, among which 69.6% was reduced by sewers and 18.4% was reduced by WWTPs. Antibiotic reduction in sewers was a combined effect of dilution, physiochemical reactions, sorption, biodegradation, and retransformation, and the A2O-MBR + ozonation process in the WWTPs exhibited superior performance in diminishing antibiotics. Notably, accumulated antibiotics in the excess sludge posed a high risk to natural environments (with a risk quotient of approximately 13.0), and the potential risk during combined sewer overflows (CSOs) was undetermined. Thus, enhanced sludge treatment techniques, accurate risk prediction, and proper precautions at CSOs are required to mitigate potential risk. A novel scheme involving an accurate estimation of discharge loads, preliminary treatment of highly concentrated discharge sources, and synergic control in sewers was proposed to eliminate antibiotics at the front end of pipes.

Fate and removal of emerging contaminants in anaerobic fluidized membrane bioreactor filled with thermoplastic gel as biofilm support

The Anaerobic Fluidized Membrane Bioreactor (AnFMBR) is a membrane-based hybrid technology that can overcome the limitations of conventional anaerobic sewage treatment. Although previous studies have demonstrated excellent performance in the removal of conventional organic pollutants, further research into the removal paths of emerging contaminants (ECs) under various operating conditions is required for proper design and development of the AnFMBR technology. Regarding this, the fate of four ECs in a lab-scale AnFMBR filled with thermoplastic gel for biofilm growth was investigated under various Hydraulic Retention Time (HRT) conditions. When the HRT was 13 h, diclofenac and 17β-estradiol were efficiently removed at 93% and 72% respectively. Even after an HRT reduction to 6.5 h, the system was still able to maintain high ECs removals (74% for diclofenac and 69% for 17β-estradiol). However, irrespective of HRT operational condition, smaller removals of 17a-ethinylestradiol (37-52%) were observed, while only marginal removals of amoxicillin were achieved (5-29%). Biotransformation was attributed as the main route for ECs removal. The results obtained in this study indicate that the membrane-based hybrid AnFMBR can be used to treat the target ECs without influence on anaerobic process. The technology had better removal efficiency for diclofenac and 17β-estradiol. However, the AnFMBR system exhibits high variability in EC removal and low capacity for amoxicillin removal, implying that a combination of other processes is still required to properly avoid the release of these contaminants into the environment.

Desorption of pharmaceuticals and illicit drugs from different stabilized sludge types across pH

Pharmaceutical and illicit drug residues in sewage sludge may present important risks following direct application to agricultural soils, potentially resulting in uptake by plants. Leaching/desorption tests were performed on different types of stabilized sewage sludge originating from multiple treatment technologies in the Slovak Republic. Acid rain and base-rich condition of soil with different pH conditions were simulated to model the effect of widely varying pH (pH 2, 4, 7, 9, and 12) on the leaching/desorption of pharmaceuticals and illicit drugs. Twenty-nine of 93 target analytes were found above the limit of quantification in sludge or associated leachates. Total desorbed amounts of pharmaceuticals and illicit drugs ranged from 810 to 4000 µg/kg, and 110 to 3600 µg/kg of the dry mass of anaerobic and aerobic sludge, respectively. Desorbed fractions were calculated as these values are normalized to initial sludge concentration and, therefore, were more suitable for qualitative description of the behavior of individual compounds. Using principal component analysis, qualitative analysis of the desorbed fraction confirmed the differences among sludge types, pharmaceuticals, and desorption pH. Desorbed fractions could not be related to the octanol/water distribution coefficient. Desorbed fractions also did not reflect the expected ionization of studied molecules unless converted into their relative values. Generally, the lowest mobility was observed within the environmentally relevant pH range of 4-9, and high pH generally resulted in high desorption, especially in anaerobically stabilized sludges.

A review on advances in removal of endocrine disrupting compounds from aquatic matrices: Future perspectives on utilization of agri-waste based adsorbents

In the recent past, a class of emerging contaminants particularly endocrine disrupting compounds (EDCs) in the aquatic environment have gained a lot of attention. This is due to their toxic behaviour, affecting endocrine activities in humans as well as among aquatic animals. Presently, there are no regulations and discharge limits for EDCs to preclude their negative impact. Furthermore, the conventional treatment processes fail to remove EDCs efficiently. This necessitates the need for more research aimed at development of advanced alternative treatment methods which are economical, efficient, and sustainable. This paper focusses on the occurrence, fate, toxicity, and various treatment processes for removal of EDCs. The treatment processes (physical, chemical, biological and hybrid) have been comprehensively studied highlighting their advantages and disadvantages. Additionally, the use of agri-waste based adsorption technologies has been reviewed. The aim of this review article is to understand the prospect of application of agri-waste based adsorbents for efficient removal of EDCs. Interestingly, research findings have indicated that the use of these low-cost and abundantly available agri-waste based adsorbents can efficiently remove the EDCs. Furthermore, the challenges and future perspectives on the use of agri-waste based adsorbents have been discussed.

Enhanced removal of antibiotics using Eichhornia crassipes root biomass in an aerobic hollow-fiber membrane bioreactor

The impact of water hyacinth (Eichhornia crassipes) root biomass (WHRB) on pharmaceutical wastewater treatment with an aerobic hollow-fiber membrane bioreactor (HF-MBR) was investigated. The performance of the bioreactor was assessed in terms of COD (Chemical Oxygen Demand) and antibiotic removal and membrane biofouling rate. For deeper insight, microbial communities in sludge and biofilm layers were analyzed through Illumina sequencing. The addition of WHRB into the HF-MBR increased the COD (by 6%), as well as antibiotics and transformation products removal efficiency. Removal efficiencies of 97%, 98% and 84% were obtained for removal of erythromycin, sulfamethoxazole, and tetracycline. Furthermore, WHRB modified the biodegradation network, increased the relative abundances of Chloroflexi, Proteobacteria and Nitrospirae and decreased Firmicutes, compared with the control with antibiotics. The addition of WHRB also enriched Actinobacteria and Bacteroidetes while decreasing the phylla Chloroflexi and Saccharibacteria in the biofilm.

Occurrence, removal, and mass balance of contaminants of emerging concern in biological nutrient removal-based sewage treatment plants: Role of redox conditions in biotransformation and sorption

The study investigates the fate of 20 contaminants of emerging concern (CECs) in two full-scale wastewater treatment plants (WWTPs) based on the Biodenipho™ (WWTP 1) and anaerobic-anoxic-oxic (WWTP 2) processes. Samples of both the dissolved and solid phases (particulate and sludge) from all the wastewater and sludge processing-related units were studied using the mass balance approach to understand the distribution of CECs. The total mass load removal efficiency for anti-inflammatory (4), antibiotics (4), and hormones (5) was 76, 46, 93%, and 72, 38, 90% from WWTP 1 and 2, respectively. The mass load analysis showed that 8.3 kg and 6.5 kg of targeted contaminants enter the treatment plants per day while 0.35 kg and 0.32 kg are discharged along with effluent, and 1.5 g and 7.7 g (dry weight) are released through sludge in WWTP 1 and 2, respectively. Both biodegradation and sorption mechanisms depended on the redox conditions. Ammonia oxidizing conditions favoured the most for the biotransformation, followed by anaerobic and nitrate-reducing conditions. The study stresses the need for separate redox conditions for optimum removal of CECs and advanced tertiary treatment to remove recalcitrant compounds. The results help better understand the removal mechanisms of the CECs in BNR treatment.

Insights into the removal of pharmaceutically active compounds from sewage sludge by two-stage mesophilic anaerobic digestion

The removal efficiencies (REs) of twenty-seven pharmaceutically active compounds (PhACs) (eight analgesic/anti-inflammatories, six antibiotics, four β-blockers, two antihypertensives/diuretics, three lipid regulators and four psychiatric drugs) were evaluated in a pilot-scale two-stage mesophilic anaerobic digestion (MAD) system treating thickened sewage sludge from a pilot-scale A²O™ wastewater treatment plant (WWTP) which was fed with wastewater from the pre-treatment of the full-scale WWTP Murcia Este (Murcia, Spain). The MAD system was long-term operated using two different sets of sludge retention times (SRTs) for the acidogenic (AcD) and methanogenic (MD) digesters (phase I, 2 and 12 days; and phase II, 5 and 24 days, in AcD and MD, respectively). Quantitative PCR (qPCR) and Illumina MiSeq sequencing were used to estimate the absolute abundance of Bacteria, Archaea, and Fungi and investigate the structure, diversity and population dynamics of their communities in the AcD and MD effluents. The extension of the SRT from 12 (phase I) to 24 days (phase II) in the MD was significantly linked with an improved removal of carbamazepine, clarithromycin, codeine, gemfibrozil, ibuprofen, lorazepam, and propranolol. The absolute abundances of total Bacteria and Archaea were higher in the MD regardless of the phase, while the diversity of bacterial and archaeal communities was lower in phase II, in both digesters. Non-metric multidimensional scaling (MDS) plots showed strong negative correlations among phyla Proteobacteria and Firmicutes and between genera Methanosaeta and Methanosarcina throughout the full experimental period. Strong positive correlations were revealed between the relative abundances of Methanospirillum and Methanoculleus and the methanogenesis performance parameters (volatile solids removal, CH₄ recovery rate and %CH₄ in the biogas), which were also related to longer SRT. The REs of several PhACs (naproxen, ketoprofen, ofloxacin, fenofibrate, trimethoprim, and atenolol) correlated positively (r > 0.75) with the relative abundances of specific bacterial and archaeal groups, suggesting their participation in biodegradation/biotransformation pathways.

Use of selected NSAIDs in Guangzhou and other cities in the world as identified by wastewater analysis

The mass load of pharmaceuticals in the municipal wastewater based on wastewater-based epidemiology (WBE) is a good indication of population consumption in the catchment. After successful application of illicit drugs' estimation, this method holds the potential to measure the geographical and temporal consumption of prescription medicines. In this study, we investigated the occurrence of four non-steroidal anti-inflammatory drugs (NSAIDs), acetaminophen (ACM), diclofenac (DCF), ibuprofen (IBU) and naproxen (NPX), in two wastewater treatment plants in Guangzhou City, China and compared the spatial and temporal consumption variation of them. Over a period of 28 days' sampling, the detection frequency of ACM, DCF, IBU, and NPX in the influent of two wastewater treatment plants (WWTPs) in Guangzhou City were 91%, 66%, 100%, and 95%, and their concentrations were up to 128, 131, 372, and 324 ng/L, respectively. No significant inter-catchment difference was observed regarding the per capita mass load in the two WWTPs investigated. A literature review which covered 160 WWTPs in 18 countries was conducted to compare the population normalized mass load of four commonly used NSAIDs. ACM had the highest population normalized mass loads (29-17,430 mg/d/1000 inhabitants) and DCF had the lowest population normalized mass load (6.5-628 mg/d/1000 inhabitants) in the catchments located in 18 countries. The mass loads of selected NSAIDs in China were lower than those in European and North American. ACM and IBU consumptions were at least 2 times higher in winter than that in summer, in contrast, DCF and NPX consumptions had no significant seasonal variation.

Potential biotransformation pathways and efficiencies of ciprofloxacin and norfloxacin by an activated sludge consortium

Fluoroquinolones (FQs), such as ciprofloxacin (CIP) and norfloxacin (NOR), are types of emerging trace pollutants that have attracted great attention. In this study, an activated sludge (AS) consortium with high bio-removal capability to CIP and NOR was obtained by acclimating with CIP and NOR for 10 d. Meanwhile, a CIP- and NOR- transforming bacterial strain (S5), which is highly homologous to the 16S rRNA gene sequence of Enterobacter sp., was isolated from the acclimated AS. The bio-removal efficiency of CIP under the acclimated AS consortium was better than that under the pure culture of Enterobacter sp. S5 (93.1% vs. 89.3%), while the bio-removal efficiency of NOR under the acclimated AS consortium was lower than that under the pure culture of Enterobacter sp. S5 (83.9% vs. 89.8%). The biotransformation and bio-adsorption were two main ways to bio-remove CIP and NOR. However, the CIP and NOR biotransformation efficiencies of the acclimated AS were higher than under the pure culture of Enterobacter sp. S5, while the CIP and NOR adsorption of acclimated AS were lower than that under the pure culture of Enterobacter sp. S5. The N-acetylciprofloxacin and N-acetylnorfloxacin were the main biotransformation products of CIP and NOR. It is possible that acetyltransferase may be involved in the biotransformation process. Whether under the pure culture or AS consortium, the cytotoxicity of CIP and NOR transformation products to gram-negative bacteria was alleviated. Therefore, the acclimated AS and Enterobacter sp. S5 might provide a new strategy for removing contaminants and alleviating of FQs resistance.

Sulfamethoxazole induced systematic and tissue-specific antioxidant defense in marine mussels (Mytilus galloprovincialis): Implication of antibiotic's ecotoxicity

Sulfamethoxazole (SMX), recognized as emerging pollutant, has been frequently detected in aquatic environment. However, effects induced by SMX and the underneath mechanism on non-target aquatic organisms, marine mussels (Mytilus galloprovincialis), are still largely unknown. In present study, marine mussels were exposed to SMX (nominal concentrations 0.5, 50 and 500 μg/L) for 6 days, followed by 6 days depuration and responses of antioxidant defenses, e.g. superoxide dismutase (SOD), catalase (CAT) and glutathione-S-transferase (GST), etc., at transcriptional, translational and functional levels were evaluated in two vital tissues, gills and digestive glands. Results showed SMX can be accumulated in mussels while the bio-accumulative ability was low under the experimental condition. A systemic but not completely synchronous antioxidant defense at different levels upon SMX exposure. The transcriptional alteration was more sensitive and had the potential to be used as early warning of SMX induced ecotoxicity. Complementary function of antioxidant enzymes with specific alteration of metabolism related gene (gst) suggested that further researches should focused on SMX metabolism and SMX induced effects simultaneously. Significant tissue-specific antioxidant responses were discovered and gills showed earlier and quicker reacting ability than digestive glands, which was closely related to the functional diversity and different thresholds of xenobiotics allowance.

Electrochemical Degradation of Tetracycline Using a Ti/Ta2O5-IrO2 Anode: Performance, Kinetics, and Degradation Mechanism

Tetracycline (TC) is widely used in production and in life. The high volume of its use and the difficulty of its disposal have become the most important causes of environmental pollution. A suitable method needs to be found to solve this problem. In this study, the Ti/Ta₂O₅-IrO₂ electrode was characterized for its surface morphology and crystal composition. The electrochemical catalytic ability of the Ti/Ta₂O₅-IrO₂ electrode was investigated using LSV and CV tests. The electrochemical degradation of tetracycline (TC) in water with a Ti/Ta₂O₅-IrO₂ anode was investigated. The main influence factors, such as current density (2.5–10 mA/cm²), electrode spacing (20–40 mm), initial TC concentration (20–80 mg/L) and initial solution pH (4.74–9.48) were analyzed in detail and their influences on reaction kinetics was summed up. The removal rate increased along with the increasing current density, decreasing initial TC concentration and decreasing of electrode distance under the experimental conditions. The optimum pH was 4.74. UV–vis, total organic carbon (TOC) and high-performance liquid chromatography-mass spectrometry (HPLC-MS) analyses were used to reveal the mechanism of TC degradation. Nine main intermediates were identified, and the degradation pathways were proposed. A new insight has been postulated for the safe and efficient degradation of TC using the Ti/Ta₂O₅-IrO₂ electrode.

Safety evaluation and ibuprofen removal via an Alternanthera philoxeroides-based biochar

Pharmaceutical and personal care products (PPCPs) are a representative class of emerging contaminants. This study aimed to investigate the PPCP removal performance and application safety of a biochar fabricated using the invasive plant Alternanthera philoxeroides (APBC). According to scanning electron microscopy and pore size analyses, APBC exhibited a porous structure with a specific surface area of 857.5 m²/g. A Fourier transform infrared spectroscopy analysis indicated the presence of surface functional groups, including phosphorus-containing groups, C=O, C=C, and -OH. The adsorption experiment showed that the maximum removal efficiency of ibuprofen was 97% at an initial concentration of 10 mg/L and APBC dosage of 0.8 g/L. The adsorption kinetics were fitted by the pseudo-second-order model with the highest correlation coefficient (R² = 0.9999). The adsorption isotherms were well described by the Freundlich model (R² = 0.9896), which indicates a dominant multilayer adsorption. The maximum adsorption capacity of APBC was 172 mg/g. A toxicity evaluation, based on Chlorella pyrenoidosa and human epidermal BEAS-2B cells, was carried out using a spectrum analysis, thiazolyl blue tetrazolium bromide assay, and flow cytometry. The results of the above showed the low cytotoxicity of APBC and demonstrated its low toxicity in potential environmental applications.

A review on pharmaceuticals removal from waters by single and combined biological, membrane filtration and ultrasound systems

Contaminants of emerging concern (CEC) such as pharmaceuticals commonly found in urban and industrial wastewater are a potential threat to human health and have negative environmental impact. Most wastewater treatment plants cannot efficiently remove these compounds and therefore, many pharmaceuticals end up in aquatic ecosystems, inducing problems such as toxicity and antibiotic-resistance. This review reports the extent of pharmaceutical removal by individual processes such as bioreactors, advanced oxidation processes and membrane filtration systems, all of which are not 100% efficient and can lead to the direct discharge of pharmaceuticals into water bodies. Also, the importance of understanding biotransformation of pharmaceutical compounds during biological and ultrasound treatment, and its impact on treatment efficacy will be reviewed. Different combinations of the processes above, either as an integrated configuration or in series, will be discussed in terms of their degradation efficiency and scale-up capabilities. The trace quantities of pharmaceutical compounds in wastewater and scale-up issues of ultrasound highlight the importance of membrane filtration as a concentration and volume reduction treatment step for wastewater, which could subsequently be treated by ultrasound.

Promoting the degradation of organic micropollutants in tertiary moving bed biofilm reactors by controlling growth and redox conditions

A novel process configuration was designed to increase biofilm growth in tertiary moving bed biofilm reactors (MBBRs) by providing additional substrate from primary treated wastewater in a sidestream reactor under different redox conditions in order to improve micropollutant removal in MBBRs with low substrate availability. This novel recirculating MBBR was operated on pilot scale for 13 months, and a systematic increase was seen in the biomass concentration and the micropollutant degradation rates, compared to a tertiary MBBR without additional substrate. The degradation rates per unit carrier surface area increased in the order of ten times, and for certain micropollutants, such as atenolol, metoprolol, trimethoprim and roxithromycin, the degradation rates increased 20-60 times. Aerobic conditions were critical for maintaining high micropollutant degradation rates. With innovative MBBR configurations it may be possible to improve the biological degradation of organic micropollutants in wastewater. It is suggested that degradation rates be normalized to the carrier surface area, in favor of the biomass concentration, as this reflects the diffusion limitations of oxygen, and will facilitate the comparison of different biofilm systems.

Spatial variation of pharmaceuticals in the unit processes of full-scale municipal wastewater treatment plants in Korea

Several reports have elucidated the removal of pharmaceutical residues in municipal wastewater treatment plants (WWTPs). However, there remains a need to determine the spatial distribution of pharmaceuticals in the unit processes of full-scale municipal WWTPs. Herein, spatial variations of fifteen pharmaceuticals in the unit processes of four full-scale municipal WWTPs were assessed by analyzing both solid and liquid samples. Furthermore, different pathways of each pharmaceutical such as biodegradation, adsorption, deconjugation, and electrostatic interaction were investigated. Pharmaceutical mass loading were measured at various points for the different unit process and evaluated using liquid chromatography-tandem mass spectrometry. The average mass loading of acetaminophen and caffeine decreased tremendously in the first biological treatment process regardless of the process configuration. In contrast, a temporary increase was observed in the mass loading of ibuprofen in the anaerobic and/or anoxic processes, which was presumably caused by deconjugation. Additionally, the adverse effect of coagulation on ibuprofen removal was validated. The major removal mechanism for the selected antibiotics, except for sulfamethoxazole, was the adsorption by biosolids due to electrostatic interaction. Subsequently, a drastic decrease was observed in their mass loadings in the solid-liquid separation process of the WWTPs. The membrane bioreactor (MBR) shows excellent capability for mitigation of pharmaceuticals in municipal wastewater because it comprises a high concentration of biosolids that act as adsorbents. The evaluation of the spatial variations of the selected pharmaceuticals in different unit processes provides valuable information on their behavior and removal mechanisms.

Comprehensive review on iodinated X-ray contrast media: Complete fate, occurrence, and formation of disinfection byproducts

Iodinated contrast media (ICM) are drugs which are used in medical examinations for organ imaging purposes. Wastewater treatment plants (WWTPs) have shown incapability to remove ICM, and as a consequence, ICM and their transformation products (TPs) have been detected in environmental waters. ICM show limited biotransformation and low sorption potential. ICM can act as iodine source and can react with commonly used disinfectants such as chlorine in presence of organic matter to yield iodinated disinfection byproducts (IDBPs) which are more cytotoxic and genotoxic than conventionally known disinfection byproducts (DBPs). Even highly efficient advanced treatment systems have failed to completely mineralize ICM, and TPs that are more toxic than parent ICM are produced. This raises issues regarding the efficacy of existing treatment technologies and serious concern over disinfection of ICM containing waters. Realizing this, the current review aims to capture the attention of scientific community on areas of less focus. The review features in depth knowledge regarding complete environmental fate of ICM along with their existing treatment options.

Pharmaceutical and Personal Care Products in Different Matrices: Occurrence, Pathways, and Treatment Processes

The procedures for analyzing pharmaceuticals and personal care products (PPCPs) are typically tedious and expensive and thus, it is necessary to synthesize all available information from previously conducted research. An extensive collection of PPCP data from the published literature was compiled to determine the occurrence, pathways, and the effectiveness of current treatment technologies for the removal of PPCPs in water and wastewater. Approximately 90% of the compiled published papers originated from Asia, Europe, and the North American regions. The incomplete removal of PPCPs in different water and wastewater treatment processes was widely reported, thus resulting in the occurrence of PPCP compounds in various environmental compartments. Caffeine, carbamazepine, diclofenac, ibuprofen, triclosan, and triclocarban were among the most commonly reported compounds detected in water and solid matrices. Trace concentrations of PPCPs were also detected on plants and animal tissues, indicating the bioaccumulative properties of some PPCP compounds. A significant lack of studies regarding the presence of PPCPs in animal and plant samples was identified in the review. Furthermore, there were still knowledge gaps on the ecotoxicity, sub-lethal effects, and effective treatment processes for PPCPs. The knowledge gaps identified in this study can be used to devise a more effective research paradigm and guidelines for PPCP management.

Determination of pharmaceuticals in solid samples in municipal wastewater treatment plants by online SPE LC-MS/MS using QuEChERS extraction

In this study, a pretreatment method based on the QuEChERS method has been applied for simultaneously extracting 27 residual pharmaceuticals from wastewater solids. The extracted compounds have been analyzed using online solid-phase extraction (SPE) coupled to liquid chromatography with tandem mass spectrometry (LC-MS/MS). A recovery test was conducted according to the absorbent type, and buffers were added in the sample extraction step. The highest recovery efficiency could be observed when Na₂SO₄ was used as an absorbent and Na₂EDTA was injected during the extraction process; the recovery efficiencies of the proposed method for the target compounds ranged from 61.3 to 137.2%, and the repeatability was 6.8%. These recovery and repeatability data showed that the proposed method could reliably analyze the 27 target residual pharmaceuticals. The concentrations of the target compounds were all below the limits of quantification: 830 ng g^-1 for the target compounds in suspended solids, 2353 ng g^-1 in activated sludge, and 1929 ng g^-1 in waste sludge. The analytical method established in this study can be applied to quantify residual pharmaceuticals in solid samples and to investigate their behaviors in a municipal wastewater treatment plant.

Emerging organic contaminants and odorous compounds in secondary effluent wastewater: Identification and advanced treatment

This study aims to address organic micropollutants in secondary effluents from municipal wastewater treatment plants (WWTPs) by first identification of micropollutants in different treatment units, and second by evaluating an advanced treatment process for removals of micropollutants. In secondary effluents, 28 types of pharmaceutical and personal care products (PPCPs), 5 types of endocrine disrupting chemicals (EDCs) and 3 types of odorous compounds are detected with total concentrations of 513 ± 57.8 ng/L, 991 ± 36.5 ng/L, 553 ± 48.3 ng/L, respectively. An integrated process consisting of in-situ ozonation, ceramic membrane filtration (CMF) and biological active carbon (BAC) filtration is investigated in a pilot scale (1000 m³/d) for removal of micropollutants in secondary effluents. The total removal efficiencies of PPCPs, EDCs and odorous compounds are 98.5%, 95.4%, and 91.1%, respectively. Removal mechanisms of emerging organic contaminants (EOCs) and odorous compounds are discussed based on their physicochemical properties. The remarkable removal efficiencies of micropollutants by the pilot system is attributed to synergistic effects of combining ozonation, ceramic membrane filtration and BAC filtration. This study provides a cost-effective and robust technology with the capability of treating secondary effluents for reuse applications.

Enhanced visible light photoelectrocatalytic degradation of tetracycline hydrochloride by I and P co-doped TiO2 photoelectrode

Elimination of antibiotics such as tetracycline hydrochloride (TC) from wastewater is of great significance, but still faces challenges. Herein, for the first time, I and P co-doped TiO₂ catalysts were prepared via a hydrolysis method. We also reported a simple method to prepare I and P co-doped TiO₂ photoelectrodes, which exhibited preeminent photoelectrocatalytic (PEC) performance for the decomposition of TC. The synergistic effect of I and P co-doping could significantly improve the charge separation rate and enhance the light absorption capacity of TiO₂, leading to an enhancement of PEC activity. The main factors affecting the PEC performance were investigated, and the highest degradation rate constant (4.20 × 10^-2 min^-1) was achieved when the doping content of P was 4 at% (ITP-4 photoelectrode) at pH 11.02 under visible light. The Langmuir-Hinshelwood kinetic model and active species trapping experiments were selected to investigate the degradation mechanism of TC. The results suggest that the hydroxyl radicals and photogenerated holes were the main active species that were responsible for the decomposition of TC. Moreover, the degradation pathways of TC based on the intermediates also demonstrated that the hydroxyl radicals and holes showed a principal role in degrading TC.

WITHDRAWN: Progress in the removal of organic microcontaminants from wastewater using high retention membrane bioreactors: A critical review

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/our-business/policies/article-withdrawal.

Powdered activated carbon - Membrane bioreactor (PAC-MBR): Impacts of high PAC concentration on micropollutant removal and microbial communities

In this study, the effect of a high concentration of powdered activated carbon (PAC) on pollutant removal and microbial communities was systematically investigated. Micropollutant removal by the 'control' MBR (without PAC addition) was pollutant-specific and was mainly controlled by their molecular properties. The PAC-MBR achieved enhanced removal of micropollutant by 10% (ofloxacin) to 40% (caffeine). Analysis of the microbial communities in the sludge samples collected from both MBRs indicated an increase in the abundance of 24 (out of 31) genera following PAC addition. Notably, bacterial diversity enriched, particularly in the anoxic zone of the PAC-MBR, indicating a positive impact of recirculating mixed liquor containing PAC from the aerobic to the anoxic zone. In addition, PAC improved the abundance of Comamonas and Methanomethylovorans (up to 2.5%) that can degrade recalcitrant micropollutants. According to the quantitative PCR (qPCR) analysis, the copies of functional genes (nirS, nosZ and narG) increased in PAC-MBR. This study demonstrated that MBR could be operated at a high PAC concentration without compromising the pollutant removal and microbial community evolution during wastewater treatment.

Occurrence and risk assessment of fluoroquinolone antibiotics in reclaimed water and receiving groundwater with different replenishment pathways

Artificial recharge to groundwater with reclaimed water is considered a promising method to alleviate groundwater depletion and over-exploitation. However, the occurrence of fluoroquinolone antibiotics (FQs) was ubiquitous in wastewater, surface water, groundwater and even drinking water threating human health and ecology. In this study, the occurrence of six selected FQs in reclaimed water effluent and their removal by tertiary treatment units were investigated. The overall removal efficiencies in average of the tertiary treatment processes in Beijing and Changzhou were ranging from 21.2% to 55.2%. Activated carbon exhibited better performance for FQs removal than ozone and biological treatment such as membrane bioreactor, anaerobic-anoxic-oxic and biofilter. The results of two pilot study showed that the impact of reclaimed water to groundwater quality in terms of FQs concentration by direct injection in GBD was stronger than surface spreading in Changzhou, which might be due to the recharge strategy and the physical and chemical characteristics of sediment and aquifer soil. The hazard quotient (HQ) values of ofloxacin (OFL) in reclaimed water was up to 12.54, indicating the extreme eco-toxicological risk, while enrofloxacin (ENR) exhibited medium risk. After recharge with reclaimed water, the HQ values of OFL and ENR in groundwater ranged from low to medium ecological risk to the environment. Thus, the FQs in reclaimed water need to be paid more attention during their reuse for groundwater recharge, especially by direct injection. It is suggested that FQs should be considered in the priority substances lists in standards and guidelines of reclaimed water reuse for groundwater recharge to ensure the safety of groundwater.

Comparison of diclofenac transformation in enriched nitrifying sludge and heterotrophic sludge: Transformation rate, pathway, and role exploration

The adverse effects of diclofenac (DCF) on ecosystems and human health have induced increasing interest in its elimination in environment. DCF can be removed to some extent by nitrifying and heterotrophic microbes during wastewater treatment process. However, the actual roles of nitrifying and heterotrophic microbes in the transformation of DCF remain unclear. In this study, batch experiments were conducted to explore the biological transformation of DCF in enriched nitrifying sludge (NS), heterotrophic sludge (HS) and activated sludge (AS) systems. DCF was removed three times faster in enriched NS than in HS. Three transformation pathways of DCF in enriched NS, HS, and AS were proposed and compared. Hydroxylation was the crucial transformation step in the three transformation pathways. A faster hydroxylation reaction contributed to the faster removal of DCF in enriched NS. More transformation products (TPs) and reaction types (i.e. reductive dechlorination, sulphidation and methylation reactions) were observed in HS. Furthermore, some TPs that were resistant to degrade in enriched NS, such as DCF-benzoic acid, could be further transformed in HS. Accordingly, enriched NS could remove DCF more rapidly while HS could further transform some TPs resistant to degrade in enriched NS. Nitrifying and heterotrophic microbes may cooperatively and rapidly eliminate not only DCF, but also its TPs.

Achieving simultaneous nitrogen and antibiotic removal in one-stage partial nitritation-Anammox (PN/A) process

Partial nitritation-Anammox (PN/A) process has been recognized as a sustainable process for biological nitrogen removal. Although various antibiotics have been ubiquitously detected in influent of wastewater treatment plants, little is known whether functional microorganisms in the PN/A process are capable of biodegrading antibiotics. This study aimed to investigate simultaneous nitrogen and antibiotic removal in a lab-scale one-stage PN/A system treating synthetic wastewater containing a widely-used antibiotic, sulfadiazine (SDZ). Results showed that maximum total nitrogen (TN) removal efficiency of 86.1% and SDZ removal efficiency of 95.1% could be achieved when treating 5 mg/L SDZ under DO conditions of 0.5-0.6 mg/L. Compared to anammox bacteria, ammonia-oxidizing bacteria (AOB) made a major contribution to SDZ degradation through their cometabolic pathway. A strong correlation between amoA gene and SDZ removal efficiency was found (p < 0.01). In addition, the degradation products of SDZ did not exhibit any inhibitory effects on Escherichia coli. The findings suggest that it is promising to apply the PN/A process to simultaneously remove antibiotics and nitrogen from contaminated wastewater.

A systematic approach of method development for analysis of multiple classes of emerging contaminants in wastewater: a case study of a biological nutrient removal based plant

Pharmaceuticals, personal care products, synthetic hormones, and industrial manufacturing additives are used worldwide, and their residues are frequently detected in wastewater. In this study, a sensitive and selective method was developed and validated for the detection and quantification of 14 Emerging Contaminants (ECs) with various physico-chemical properties frequently found in wastewater. Solid Phase Extraction (SPE) allowed for extraction and concentration of the compounds. Liquid chromatography-mass spectrometry in both positive and negative electrospray ionization mode was used for the analysis. Three different combinations of mobile phase, water + 0.1% formic acid : acetonitrile + 0.1% formic acid (3 compounds), water + 0.1% formic acid : methanol (5) and 10 mM ammonium acetate buffer : acetonitrile + 0.1% formic acid (6) gave the best chromatographic conditions to analyze the contaminants in real wastewater samples. Four different eluents at acidic and basic sample pH values were tested to optimize the SPE methodology, and three different dilution ratios (1 : 1, 2 : 1, and 5 : 1) were tested to reduce the matrix effect. Data validation was conducted using linearity, intra and inter-day repeatability, LOD/LOQ, percentage recovery, and percentage process efficiency studies. As a case study, a biological nutrient removal (BNR) based plant was tested for the presence of ECs using the developed method. Removal efficiency at different treatment stages was assessed. Most of the treatment occurred at the secondary treatment stage, whereas primary treatment and disinfection had little effect on removal. All the contaminants were found in the inlet wastewater. Estrone (E1), an endocrine disrupting compound, was reported for the first time in Indian wastewater at 376.2 ng L-1. Seven, four, and two ECs were removed at high, medium, and low efficiencies, respectively. Carbamazepine showed negative removal. This study enhanced our understanding of the occurrence and fate of several ECs in BNR based treatment systems.

Occurrence and Removal of Veterinary Antibiotics in Livestock Wastewater Treatment Plants, South Korea

In this study, livestock wastewater treatment plants in South Korea were monitored to determine the characteristics of influent and effluent wastewater, containing four types of veterinary antibiotics (sulfamethazine, sulfathiazole, chlortetracycline, oxytetracycline), and the removal efficiencies of different treatment processes. Chlortetracycline had the highest average influent concentration (483.7 μg/L), followed by sulfamethazine (251.2 μg/L), sulfathiazole (230.8 μg/L) and oxytetracycline (25.7 μg/L), at five livestock wastewater treatment plants. Sulfathiazole had the highest average effluent concentration (28.2 μg/L), followed by sulfamethazine (20.8 μg/L) and chlortetracycline (11.5 μg/L), while no oxytetracycline was detected. For veterinary antibiotics in the wastewater, a removal efficiency of at least 90% was observed with five types of treatment processes, including a bio-ceramic sequencing batch reactor, liquid-phase flotation, membrane bioreactor, bioreactor plus ultrafiltration (BIOSUF) and bio best bacillus systems. Moreover, this study evaluated the removal efficiency via laboratory-scale experiments on the conventional contaminants, such as organic matter, nitrogen, phosphorus and veterinary antibiotics. This was done using the hydraulic retention time (HRT), under three temporal conditions (14 h, 18 h, 27 h), using the anaerobic–anoxic–oxic (A2O) process, in an attempt to assess the combined livestock wastewater treatment process where the livestock wastewater is treated until certain levels of water quality are achieved, and then the effluent is discharged to nearby sewage treatment plants for further treatment. The removal efficiencies of veterinary antibiotics, especially oxytetracycline and chlortetracycline, were 86.5–88.8% and 87.9–90.8%, respectively, exhibiting no significant differences under various HRT conditions. The removal efficiency of sulfamethazine was at least 20% higher at HRT = 27 h than at HRT = 14 h, indicating that sulfamethazine was efficiently removed in the A2O process with increased HRT. This study is expected to promote a comprehensive understanding of the behavior and removal of veterinary antibiotics in the livestock wastewater treatment plants of South Korea.