Fly ash toxicity, emerging issues and possible implications for its exploitation in agriculture; Indian scenario: A review

Assessment of antimicrobial activity and GC-MS using culture filtrate of local marine Bacillus strains

Secondary metabolites produced by Bacillus species from marine sources encompass a variety of compounds such as lipopeptides, isocoumarins, polyketides, macrolactones, polypeptides and fatty acids. These bioactive substances exhibit various biological activities, including antibiotic, antifungal, antiviral, and antitumor properties. This study aimed to isolate and identify a particular species of Bacillus from marine water and organisms that can produce bioactive secondary metabolites. Among the 73 Bacillus isolates collected, only 5 exhibited antagonistic activity against various viral and bacterial pathogens. The active isolates were subjected to 16S rRNA sequencing to determine their taxonomical affiliation. Among them, Bacillus tequilensis CCASU-2024-66 strain no. 42, with the accession number ON 054302 in GenBank, exhibited the highest inhibitory potential. It displayed an inhibition zone of 21 mm against Bacillus cereus while showing a minimum zone of inhibition of 9 mm against Escherichia coli and gave different inhibition against pathogenic fungi, the highest inhibition zone 15 mm against Candida albicans but the lowest inhibition zone 10 mm was against Botrytis cinerea, Fusarium oxysporum. Furthermore, it demonstrated the highest percentage of virucidal effect against the Newcastle virus and influenza virus, with rates of 98.6% and 98.1%, respectively. Furthermore, GC-MS analysis was employed to examine the bioactive substance components, specifically focusing on volatile and polysaccharide compounds. Based on these results, Bacillus tequilensis strain 42 may have the potential to be employed as an antiviral agent in poultry cultures to combat Newcastle and influenza, two extremely destructive viruses, thus reducing economic losses in the poultry production sector. Bacteria can be harnessed for the purpose of preserving food and controlling pathogenic fungi in both human and plant environments. Molecular docking for the three highly active derivatives 2,3-Butanediol, 2TMS, D-Xylopyranose, 4TMS, and Glucofuranoside, methyl 2,3,5,6-tetrakis-O-(trimethylsilyl) was carried out against the active sites of Bacillus cereus, Listeria monocytogenes, Candida albicans, Newcastle virus and influenza virus. The data obtained from molecular docking is highly correlated with that obtained from biology. Moreover, these highly active compounds exhibited excellent proposed ADMET profile.

Recent trends in the use of fly ash for the adsorption of pollutants in contaminated wastewater and soils: Effects on soil quality and plant growth

Fly ash is one of the largest types of industrial wastes produced during the combustion of coal for energy generation. Finding efficient and sustainable solutions for its reuse has been the subject of substantial research worldwide. Here, we review the recent research data related to (i) the use of fly ash as a low-cost adsorbent for pollutants in wastewater and soils and (ii) its implications in soil-plant system. Fly ash showed prominent adsorption capacity for pollutants in water especially when it was activated or applied in composites. In addition to direct pollutant binding in soils, fly ash can enhance the soil pH indirectly increasing metals' immobilization reducing their plant uptake. Its non-selective adsorptive nature may lead to the co-adsorption of nutrients with pollutants which merits to be considered. Owing to its considerable nutrient contents, fly ash can also improve soil fertility and plant growth. The effects of fly ash on soil physico-chemical properties, microbial population and plant growth are critically evaluated. Fly ash can also contain potentially toxic contaminants (toxic metals, hydrocarbons, etc.) which could have harmful impacts on soil health and plant growth. Identifying the levels of inherent pollutants in fly ash is crucial to evaluate its suitability as a soil amendment. Negative effects of fly ash can also be addressed by using co-amendments, biological agents, and most importantly by an adequate calibration (dose and type) of fly ash based on site-specific conditions. Research directions are identified to promote the research regarding its use in wastewater treatment and agriculture.

Evaluation of Using Fly Ash as a Weighing Material for Oil-Based Drilling Fluid

Innovation and sustainability are essential in the fast-changing oil and gas business. Fly ash, a byproduct of coal combustion in power plants and factories, has become a valuable resource in many industries, changing the concept of waste materials. Fly ash is essential to sustainable development and environmental care due to its unique qualities and multiple applications. In the drilling industry, a well-designed drilling fluid is essential and this requires the use of various additives that serve specific functions to achieve a successful borehole. This study investigates the use of fly ash as a weighing material in oil-based mud, with the intent to develop an economically acceptable drilling fluid system using industrial waste. The study compared fly ash to three commonly used weighing materials in the drilling industry: calcium carbonate (CaCO3), barite (BaSO4), and ilmenite (FeTiO3). Drilling fluids were prepared using these weighing materials at various weights, and their properties (density, electrical stability, rheological features, and filtration properties) were measured using API-recommended methods. The rheology and filtration tests were conducted at elevated temperatures (350 °F). The results indicate that fly ash has the potential to be a useful weighing material in drilling operations. It can increase the fluid density up to 10 ppg without affecting the rheological properties at 350 °F. Additionally, the electrical stability of the drilling fluid was enhanced compared to the other used weighing materials. The addition of fly ash also improved rheological characteristics such as plastic viscosity, yield point, and gel strength without affecting HPHT filtration properties. The carrying capacity was improved by 53 and 86% over calcium carbonate and barite, respectively. Overall, the findings suggest that fly ash can be a viable alternative to other weighing materials in the recommended density range.

Study on application and environmental effect of phosphogypsum-fly ash-red mud composite cemented paste backfill

Phosphogypsum (PG) cementitious paste backfill (CPB) was prepared by using PG and fly ash (FA) as the main raw materials, red mud (RM) as the alkaline activator, Portland cement (OPC) as the binder, and silica fume (SF) as the additive, and its properties were investigated to achieve the objective of "treating harm with waste." The results showed that the addition of OPC facilitated the flowability of the slurry, while the addition of RM and SF had the opposite effect. The slurry presented ideal flowability when the water/binder ratio was 0.2 and the superplasticizer (SP) content was 0.7%. The mechanical properties and water resistance were improved significantly with increasing OPC, RM, and SF doping. The strength of the CPB material exceeded 22 MPa after curing at room temperature for 28 days, which met the mine filling requirements. Changes in the ion concentrations of the solution were first monitored during immersion. The dissolution rules of Ca2+ and SO42- at different immersion ages confirmed that RM promoted the continuous hydration of CPB, which was the key to improve water resistance. Microstructural analysis showed that the main hydration products were AFt and C-S-H, which played an important role in the strength development of the material. The leaching results demonstrated that the metal ion content satisfied the requirements of the III categories of Chinese environmental standards (GB/T 14848-2017), indicating that the technology is a reliable and environmentally friendly technology for PG, FA, and RM recovery that can simultaneously support safe mining.

Coal fly ash application as an eco-friendly approach for modulating the growth, yield, and biochemical constituents of Withania somnifera L. plants

The solid waste known as fly ash, which is produced when coal is burned in thermal power plants, is sustainably used in agriculture. It is an excellent soil supplement for plant growth and development since it contains some desired nutrients (macro and micro), as well as being porous. The present study was done to evaluate the effect of different fly ash levels on Withania somnifera. The present study aimed to assess the impact of various fly ash (FA) concentrations on growth, yield, photosynthetic pigments, biochemical parameters, and cell viability of W. somnifera. The results showed that FA enhanced physical and chemical properties of soil like pH, electric conductivity, porosity, water-holding capacity, and nutrients. The low doses of FA-amended soil (15%) significantly increased the shoot length (36%), root length (24.5%), fresh weight of shoots and roots (107.8 and 50.6%), dry weight of shoots and roots (61.9 and 47.1%), number of fruits (70.4%), carotenoid (43%), total chlorophyll (44.3%), relative water content (109.3%), protein content (20.4%), proline content (110.3%), total phenols (116.1%), nitrogen (20.3%), phosphorus (16.9%), and potassium (26.4%). On the other hand, the higher doses, i.e., 25% of fly ash showed a negative effect on all the above parameters and induced oxidative stress by increasing lipid peroxidation (33.1%) and hydrogen peroxide (102.0%) and improving the activities of antioxidant enzymes and osmolytes. Compared to the control plants, the plants growing in soil enriched with 15 and 25% fly ash had larger stomata pores when examined using a scanning electron microscope. In addition, according to a confocal microscopic analysis of the roots of W. somnifera, higher fly ash concentrations caused membrane damage, as evidenced by an increase in the number of stained nuclei. Moreover, several functional groups and peaks of the biomolecules represented in the control and 15% of fly ash were alcohols, phenols, allenes, ketenes, isocynates, and hydrocarbons. Gas chromatography-mass spectrometry analysis of the methanol extract of W. somnifera leaves cultivated in soil amended with 15% fly ash shows the presence of 47 bioactive compounds. The most abundant compounds in the methanol extract were cis-9-hexadecenal (22.33%), n-hexadecanoic acid (9.68%), cinnamic acid (6.37%), glycidyl oleate (3.88%), nonanoic acid (3.48%), and pyranone (3.57%). The lower concentrations of FA (15%) can be used to enhance plant growth and lower the accumulation of FA that results in environmental pollution.

Emerging waste-to-wealth applications of fly ash for environmental remediation: A review

The considerable increase in world energy consumption owing to rising global population, intercontinental transportation and industrialization has posed numerous environmental concerns. Particularly, in order to meet the required electricity supply, thermal power plants for electricity generation are widely used in many countries. However, an annually excessive quantity of waste fly ash up to 1 billion tones was globally discarded from the combustion of various carbon-containing feedstocks in thermoelectricity plants. About half of the industrially generated fly ash is dumped into landfills and hence causing soil and water contamination. Nonetheless, fly ash still contains many valuable components and possesses outstanding physicochemical properties. Utilizing waste fly ash for producing value-added products has gained significant interests. Therefore, in this work, we reviewed the current implementation of fly ash-derived materials, namely, zeolite and geopolymer as efficient adsorbents for the environmental treatment of flue gas and polluted water. Additionally, the usage of fly ash as a catalyst support for the photodegradation of organic pollutants and reforming processes for the corresponding wastewater remediation and H₂ energy generation is thoroughly covered. In comparison with conventional carbon-based adsorbents, fly ash-derived geopolymer and zeolite materials reportedly exhibited greater heavy metal ions removal and reached the maximum adsorption capacity of about 150 mg g^-1. As a support for biogas reforming process, fly ash could enhance the activity of Ni catalyst with 96% and 97% of CO₂ and CH₄ conversions, respectively.

Investigating the recovery in ecosystem functions and multifunctionality after 10 years of natural revegetation on fly ash technosol

Technogenic soil (technosol) developed from coal fly ash (FA) landfilling has been considered a critical environmental problem worldwide. Drought-tolerant plants often naturally grow on FA technosol. However, the impact of these natural revegetations on the recovery of multiple ecosystem functions (multifunctionality) remains largely unexplored and poorly understood. Here we assessed the response of multifunctionality, including nutrient cycling (i.e., carbon, nitrogen, and phosphorus), carbon storage, glomalin-related soil protein (GRSP), plant productivity, microbial biomass carbon (MBC), microbial processes (soil enzyme activities), and soil chemical properties (pH and electrical conductivity; EC) to FA technosol ten years' natural revegetation with different multipurpose species in Indo-Gangetic plain, and identified the key factors regulating ecosystem multifunctionality during reclamation. We evaluated four dominant revegetated species: Prosopis juliflora, Saccharum spontaneum, Ipomoea carnea, and Cynodon dactylon. We found that natural revegetation initiated the recovery of ecosystem multifunctionality on technosol, with greater recovery under higher biomass-producing species (P. juliflora and S. spontaneum) than lower biomass-producing ones (I. carnea and C. dactylon). The individual functions (11 of the total 16 variables) at higher functionality (70 % threshold) also exhibited this pattern among revegetated stands. Multivariate analyses revealed that most of the variables (except EC) significantly correlated with multifunctionality, indicating the capability of multifunctionality to consider the tradeoff between individual functions. We further performed structural equation modeling (SEM) to detect the effect of vegetation, pH, nutrients, and microbial activity (MBC and microbial processes) on ecosystem multifunctionality. Our SEM model predicted 98 % of the variation in multifunctionality and confirmed that the indirect effect of vegetation mediated by microbial activity is more important for multifunctionality than their direct effect. Collectively, our results demonstrate that FA technosol revegetation with high biomass-producing multipurpose species promotes ecosystem multifunctionality and emphasizes the significance of microbial activity in the recovery and maintenance of ecosystem attributes.

Arbuscular mycorrhizas amplify the risk of heavy metal transfer to human food chain from fly ash ameliorated agricultural soils

Soil contaminants threaten global food security by posing threats to food safety through food chain pollution. Fly ash is a potential agent of soil contamination that contains heavy metals and hazardous pollutants. However, being rich in macro- and micronutrients that have direct beneficial effects on plant growth, fly ash has been recommended as a low-cost soil ameliorant in agriculture in countries of the Global South. Arbuscular mycorrhizal fungi (AMF), ubiquitous in agricultural soils, enhance efficiency of plant nutrient uptake from soils but can equally increase uptake of toxic pollutants from fly ash ameliorated soils to edible crop tissues. We investigated AMF-mediated amplification of nutrient and heavy metal uptake from fly ash amended soils to shoots, roots and grains of barley. We used a microcosm-based experiment to analyse the impacts of fly ash amendments to soil in concentrations of 0 (control), 15, 30 or 50% respectively, on root colonization by AMF Rhizophagus irregularis and AMF-mediated transfer of N, P and heavy metals: Ni, Co, Pb and Cr to barley tissues. These concentrations of fly ash are equivalent to 0, 137, 275 and 458 t ha^-1 respectively, in soil. Root AMF colonization correlated negatively with fly ash concentration and was not detected at 50% fly ash amendment. Shoots, roots and grains of mycorrhizal barley grown with 15, 30 and 50% fly ash amendments had significantly higher concentrations of Ni, Co, Pb and Cr compared to the control and their respective non-mycorrhizal counterparts. Presence of heavy metals in barley plants grown with fly ash amended soil and their increased AMF-mediated translocation to edible grains may significantly enhance the volume of heavy metals entering the human food chain. We recommend careful assessment of manipulation of agricultural soils with fly ash as heavy metal accumulation in agricultural soils and human tissues may cause irreversible damage.

Risk Evaluation of Pollutants Emission from Coal and Coal Waste Combustion Plants and Environmental Impact of Fly Ash Landfilling

Emission factors (EFs) of gaseous pollutants, particulate matter, certain harmful trace elements, and polycyclic aromatic hydrocarbons (PAHs) from three thermal power plants (TPPs) and semi-industrial fluidized bed boiler (FBB) were compared. EFs of particulate matter, trace elements (except Cd and Pb), benzo[a]pyrene, and benzo[b]fluoranthene exceed the upper limits specified in the EMEP inventory guidebook for all combustion facilities. The comparison of trace elements and PAHs content in fly ashes (FAs) from lignite and coal waste combustion in TPPs and FBB, respectively, as well as the potential environmental impact of FAs disposal, was performed by employing a set of ecological indicators such as crustal enrichment factor, risk assessment code, risk indices for trace elements, and benzo[a]pyrene equivalent concentration for PAHs. Sequential analysis shows that the trace elements portion is the lowest for water-soluble and exchangeable fractions. The highest enrichment levels in FAs are noticed for As and Hg. Based on toxic trace elements content, FAs from TPPs represent a very high ecological risk, whereas fly ash from FBB poses a moderate ecological risk but has the highest benzo[a]pyrene equivalent concentration, indicating its increased carcinogenic potential. Lead isotope ratios for Serbian coals and FAs can contribute to a lead pollution global database.

A critical review on mechanochemical processing of fly ash and fly ash-derived materials

Fly ash (FA) is a solid, fine powder that constitutes a by-product obtained when coal, biomass, municipal solid waste or a mixture of these are combusted. This review article focuses on the mechanochemistry of coal fly ash (CFA), as well as highlights the issue of fly ash from municipal solid waste (MSW). In general, FA is regarded as a waste of public concern (since it contains hazardous components), which is primarily consumed in the construction industry, as well as in chemical synthesis and environmental engineering. However, the actual amount of FA recycled is still less than the amount produced, with the reuse rate of only up to 30 %. Due to its relatively low reactivity and heterogeneity, FA is commonly landfilled in huge quantities. Nevertheless, the physical and chemical properties of FA can be tailored, for example, by mechanical forces, ultimately leading to a higher value-added product. Currently, mechanochemistry (MC) is drawing attention in chemical synthesis, pollution remediation and waste management, especially as a possible solution for various drawbacks of conventional syntheses and processes. Mechanochemical processing of FA can be considered eco-friendly, inexpensive and efficient, in particular for processing tons of readily available fly ash already stored in ponds or landfills. With the aim of highlighting the hidden potential and facilitating the favorable use of FA, this article deals with FA as an environmentally challenging material, FA reactivity and recycling through mechanochemical processing, mechanochemical stabilization of heavy metals in FA, as well as up-to-date challenges for life cycle assessment (LCA) in evaluating FA-derived materials. Furthermore, all these full-potential aspects of FA mechanochemistry have not been addressed before, which is a valuable contribution to the existing literature.

Sample Preparation and Analytical Techniques in the Determination of Trace Elements in Food: A Review

Every human being needs around 20 essential elements to maintain proper physiological processes. However, trace elements are classified as beneficial, essential, or toxic for living organisms. Some trace elements are considered essential elements for the human body in adequate quantities (dietary reference intakes, DRIs), while others have undetermined biological functions and are considered undesirable substances or contaminants. Pollution with trace elements is becoming a great concern since they can affect biological functions or accumulate in organs, causing adverse effects and illnesses such as cancer. These pollutants are being discarded in our soils, waters, and the food supply chain due to several anthropogenic factors. This review mainly aims to provide a clear overview of the commonly used methods and techniques in the trace element analysis of food from sample preparations, namely, ashing techniques, separation/extraction methods, and analytical techniques. Ashing is the first step in trace element analysis. Dry ashing or wet digestion using strong acids at high pressure in closed vessels are used to eliminate the organic matter. Separation and pre-concentration of elements is usually needed before proceeding with the analytical techniques to eliminate the interferences and ameliorate the detection limits.

Evaluation of potential toxic heavy metal contamination in soil, fly ash, vegetables and grain crops along with associated ecological and health risk assessment of nearby inhabitants of a thermal power station in Jharkhand (India)

The present study aimed to evaluate the potential toxic heavy metal (PTHM) concentrations and associated ecological and health risk of nearby inhabitants (child and adult populations) of the Bokaro thermal power station (BTPS), Jharkhand, India. The fly ash containing PTHMs is released from the thermal power plant and contaminates the soil of the nearby agricultural area, roadside area and residential area. Furthermore, PTHMs cause ecological risk as well as carcinogenic health effects in adults. Inhabitants are exposed to PTHMs through exposure pathways (for instance, direct ingestion, dermal contact and air inhalation), and PTHMs were examined in this study by calculating the estimated daily intake (EDI). The contamination factor (C_f) of Cd exceeded the threshold value throughout the study area, whereas the C_f of Hg was observed higher only in roadside soil (RSS). The geoaccumulation index (I_geo) of Cd was higher in the top soil of agricultural soil (AS) (7.39) and RSS (9.38). The level of PTHMs was monitored slightly higher in the topsoil of RSS. The ecological risk index (Eri) was detected to be the highest in RSS (1628.9). The permissible limit of Cd (0.05 mg kg^-1) and Pb (0.1 mg kg^-1) for all sampled vegetables and grain crops was surpassed. The transfer factor (TF) of the studied vegetables and grain crops was in the order of Cd > Cr > Pb > Hg > As. The results of the present study concluded that the hazard quotient (HQ) values for all PTHMs analysed in soil throughout the study area were < 1, which indicates that the child population was within the safe limit. However, the adult population was at a high risk of non-carcinogenic health effects due to increased permissible limits of Cd, Pb and Cr in vegetables and grain crops whereas the target carcinogenic risk (TCR) of Pb and Cr was higher and indicated that there may be a health risk of cancer in adults.

Impact of ultra-low emission retrofitting on partitioning and emission behavior of chromium in a Chinese coal-fired power plant

Due to its low vapor pressure, chromium (Cr) mostly emitted as fly ash particles (especially PM_2.5) into environment in coal-fired power plants (CFPPs). The ultra-low emission (ULE) control technologies used in current CFPPs may be beneficial to reducing both the regular pollutants and hazardous trace elements (e.g., Cr), but the insight into the removal efficiency of Cr by different upgrading air pollution cleaning devices (APCDs) and the environmental stability of the Cr-bearing wastes produced from those APCDs in the ULE CFPPs has rarely reported. This study investigated and compared the distribution and emission characteristics of Cr in a Chinese CFPP before and after ULE, and the leaching behavior of Cr after ULE retrofitting in combustion byproducts was also revealed. The results showed that Cr was primarily captured in bottom and fly ashes (80.85%), followed by gypsum (0.02%) and sludge from wet electrostatic precipitator (WESP) (4.52 × 10^-4%), with only 3.02 × 10^-8% emitted into the atmosphere. Additional WESP had a large removal efficiency of Cr with the value of 92.04%, and the overall Cr removal efficiency of selective catalytic reduction (SCR) equipment, electrostatic precipitator (ESP), wet flue gas desulphurization (WFGD) system, and WESP equipped after ULE retrofitting was 99.99%. Notably, although the mass percentage of Cr in WESP sludge was negligible, the concentration of Cr in WESP sludge was 324.04 mg/kg. The leaching concentrations of Cr in combustion byproducts were in the descending order: fly ash > WESP sludge > bottom ash > gypsum. The atmospheric emission factor of Cr in the studied power plant was 1.08 mg/t coal, which was significantly lower than those of the CFPPs before ULE retrofitting. Therefore, the ULE retrofitting for CFPP was beneficial to reduce Cr emissions. More attention should be paid to the subsequent processing problem of solid combustion byproducts, especially the WESP sludge.

Soil indigenous microorganisms alleviate soluble vanadium release from industrial dusts

Vanadium-bearing dusts from industrial processes release abundant toxic vanadium, posing imminent ecological and human health concerns. Although the precipitation of these dusts has been recognized as the main source of soil vanadium pollution, little is known regarding the interrelationships between industrial dusts and soil inherent compositions. In this study, the interactions between dusts from vanadium smelting and soil indigenous microorganisms were investigated. Soluble vanadium (V) [V(V)] released from industrial dusts was reduced by 41.5 ± 0.39% with soil addition, compared to water leaching. Reducible fraction accounted for the highest proportion (55.1 ± 1.73%) of vanadium speciation in the resultant soils, while residual vanadium fraction increased to 83.7 ± 3.22% in the leached dusts. Functional genera (e.g., Aliihoeflea, Actinotalea) that transformed V(V) to insoluble vanadium (IV) alleviated dissolved vanadium release. Nitrate/nitrite reduction and glutathione metabolisms contributed to V(V) immobilization primarily. Structural equation model analysis indicated that V(V) reducers had significant negative impacts on soluble V(V) in the leachate. This first-attempt study highlights the importance of soil microorganisms in immobilizing vanadium from industrial dusts, which is helpful to develop novel strategies to reduce their environmental risks associated to vanadium smelting process.

Synergism of Industrial and Agricultural Waste as a Suitable Carrier Material for Developing Potential Biofertilizer for Sustainable Agricultural Production of Eggplant

The study investigates biochar from agriculture waste and flyash from coal power station as possible carrier materials for two plant growth-promoting (PGP) bacterial strains Burkholderia sp. L2 and Bacillus sp. A30 for enhanced eggplant growth and yield. Biochar-based biofertilizers with/without flyash showed higher viability up to 270 days of storage period. The maximum percentage of seed germination was observed in L2-based biochar and flyash + biochar (1:1) bifertilizer. Moreover, the L2 + biochar+flyash produced a maximum percentage increase in fruit yield with significant (p < 0.05) improvement in plant growth parameters. Post-harvest soil status also showed enhanced physical (water holding capacity, moisture content), chemical (pH, electrical conductivity, NPK), and dehydrogenase activity. The study suggests that biofertilizer of L2 strain with agriculture waste generated biochar and flyash as carrier materials can tremendously enhance the productivity of eggplant and could act as a substitute for chemical fertilizer thus solving their disposal problem by sustainable waste management.

Phenotypic Responses of Some Functional Traits in Four Native Perennial Grass Species Grown on Fly Ash Dump and Native Soil

Functional response traits of four perennial grass species (Imperata cylindrica, Cenchrus ciliaris, Sporobolus diander, and Cynodon dactylon) growing on the fly ash dump and referral site having native soil were evaluated with the objective of selecting species suitable for rapid development of vegetation cover on the fly ash dumps. All the four species showed spectacular plastic responses in functional traits of plants grown on the fly ash dump and are induced by habitat and hence are adaptive. The traits associated with the root system such as root length, spread, the volume of the substratum occupied by the root system, and root biomass showed greater plasticity than the traits of the shoot system such as shoot biomass, the mean number of tillers per clump, and mean height of tillers. For instance, for all the grass species, the ratio of root/shoot biomass was higher for fly ash grown plants as compared to that of plants grown in native soil. The highest ratio was recorded for C. dactylon (5.61 ± 2.36) and I. cylindrica (5.37 ± 2.36) whereas the lowest ratio was recorded for C. ciliaris (1.87 ± 0.44). This suggests greater allocation of resources to root than to shoot by the species for space exploitative growth that enables them to acquire nutrients from nutritionally poor and unfavorable substratum like fly ash dump. Such a strategy enables species to establish and regenerate on barren areas that include fly ash dumps. The higher root length, spread, biomass, and root/shoot ratio in plants of all the species grown on fly ash as compared to plants grown on the native soil substantiate that plasticity in functional traits enabled the species to adapt to stressed habitats. The plastic responses observed are specific to the trait, specific to the species, and specific to the environment. This is evident by the quantitative differences in the responses between traits within a species, between species, and between habitats. The phenotypic plasticity induced by the fly ash altered the relationships between functional traits of the plants. This is evident by the marked differences in the r-values for different character associations between plants grown on fly ash dump and native soil. The results suggest that all the four grass species evaluated can be used for the rapid development of vegetation cover on the fly ash dumps to mitigate environmental contamination.

Applicability of Ash Wastes for Reducing Trace Element Content in Zea mays L. Grown in Eco-Diesel Contaminated Soil

Among the large group of xenobiotics released into the environment, petroleum derivatives are particularly dangerous, especially given continuing industrial development and the rising demand for fuel. As increasing amounts of fly ash and sewage sludge are released, it becomes necessary to explore new methods of reusing these types of waste as reclamation agents or nutrient sources. The present study examined how soil contamination with Eco-Diesel oil (0; 10; 20 cm3 kg−1 soil) affected the trace-element content in the aerial parts of maize. Coal and sludge ashes were used as reclamation agents. Our study revealed that diesel oil strongly affected the trace-element content in the aerial parts of maize. In the non-amended group, Eco-Diesel oil contamination led to higher accumulation of the trace elements in maize (with the exception of Pb and Ni), with Cu and Mn content increasing the most. The ashes incorporated into the soil performed inconsistently as a reclamation agent. Overall, the amendment reduced Mn and Fe in the aerial parts of maize while increasing average Cd and Cu levels. No significant effect was noted for the other elements.

Fly Ash as an Ingredient in the Contaminated Soil Stabilization Process

Fly ash is the main by-product of coal combustion characterized by a large specific surface area. In addition to oxides, it also contains unburned coal and trace elements. This study aimed to investigate the possibility of using fly ash from pit-coal combustion (CFA) for the treatment of benzene-contaminated soil (S). The CFA was used as a mixture with Portland cement (PC) (70% PC + 30% CFA). The soil was treated with a PC-CFA mixture in amounts of 40, 60, and 80% of soil mass. During the process, the concentration of benzene was monitored with the flame-ionization detector. Produced monoliths (S+(PC-CFA)x) were tested for compressive strength and capillary water absorption. The experiment confirmed that the PC-CFA mixture limited benzene emission. The highest reduction in benzene concentration (34–39%) was observed for samples treated with the PC-CFA mixture in an amount of 80% (S+(PC-CFA)80). The average compressive strength of monoliths S+(PC-CFA)40, S+(PC-CFA)60, and S+(PC-CFA)80 was 0.57, 4.53, and 6.79 MPa, respectively. The water absorption values were in the range of 15–22% dm.

Improving the efficiency of vermicomposting of polluted organic food wastes by adding biochar and mangrove fungi

Vermicomposting of food waste amended with biochar and cow dung was studied during a 90-day composting period. The improvement of the vermicomposting process by adding three mangrove fungal species as additional amendments were studied. The use of mangrove fungi Acrophialophora jodhpurensis as a bio-catalytic actor during vermicomposting proved to be beneficial in terms of final compost quality (available N, P and K) and the shortening of the composting period. All three fungal species, however, reached the neutral pH at the end of the composting period and appeared to be beneficial. Heavy metal (Cd, Ni, Pb, Zn, Cu and Cr) concentrations decreased throughout the composting process. Food waste can be treated using vermicomposting with biochar, cow dung and the mangrove fungi A. jodhpurensis. The final vermicomposting product is suitable for agricultural use.

Potential environmental risk of trace elements in fly ash and gypsum from ultra-low emission coal-fired power plants in China

The ultra-low emission retrofitting (ULE) in China's coal-fired power plants (CFPPs) enhances removal efficiencies of trace elements, which may increase their contents in fly ash and gypsum. However, their potential environmental risks in these wastes have been scarcely evaluated. Experiments indicated that the trace elements in fly ash and gypsum accounted for approximately 92.9-98.2% of the total outputs. Most trace elements in these wastes existed mainly as mobile/leachable forms, except for the Hg in fly ash (residual form). We comprehensively evaluated the potential environmental risks of trace elements in fly ash and gypsum from ULE CFPPs in China using a modified risk assessment approach that integrates a trace element enrichment model for waste, and chemical speciation datasets. We found that nationally, trace elements in gypsum represented low levels of potential risk, even after ULE. However, the potential moderate environmental risk of fly ash has aroused attention because of trace element pollution, where Hg and Cd contributed the major risks. The relatively high risks from fly ash are mainly distributed in Guangxi, Hunan and Hebei provinces. The disposal of fly ash in these areas should be given special attention in the future.

Assessing the Capability of Chemical Ameliorants to Reduce the Bioavailability of Heavy Metals in Bulk Fly Ash Contaminated Soil

In-situ rehabilitation of fly ash at dumping sites has rarely been addressed for crop production due to growth-related constraints, largely of heavy metal (HM) contamination in soils and crops. Current communication deals with a novel approach to identify a suitable management option for rejuvenating the contaminated soils. In this background, a 60-days incubation experiment was conducted with different fly ash-soil mixtures (50 + 50%, A1; 75 + 25%, A2; 100 + 0%, A3) along with four ameliorants, namely, lime (T1), sodium sulphide (T2), di-ammonium phosphate (T3), and humic acid (T4) at 30 ± 2 °C to assess the ability of different fly ash-soil-ameliorant mixtures in reducing bio-availability of HMs. Diethylenetriaminepentaacetic acid (DTPA)-extractable bio-available HM contents for lead (Pb), cadmium (Cd), nickel (Ni), and chromium (Cr) and their respective ratios to total HM contents under the influence of different treatments were estimated at 0, 15, 30, 45, and 60 days of incubation. Further, the eco-toxicological impact of different treatments on soil microbial properties was studied after 60 days of experimentation. A1T1 significantly recorded the lowest bio-availability of HMs (~49-233% lower) followed by A2T1 (~35-133%) among the treatments. The principal component analysis also confirmed the superiority of A1T1 and A2T1 in this regard. Further, A1T1 achieved low contamination factor and ecological risk with substantial microbial biomass carbon load and dehydrogenase activity. Thus, liming to fly ash-soil mixture at 50:50 may be considered as the best management option for ameliorating metal toxicity. This technology may guide thermal power plants to provide the necessary package of practices for the stakeholders to revive their contaminated lands for better environmental sustainability.

Removal of heavy metals in municipal solid waste incineration fly ash using lactic acid fermentation broth

Municipal solid waste incineration fly ash (MSWIFA) is considered as a hazardous solid waste because of the high mobility of heavy metals. In this study, the removal of heavy metals in MSWIFA using lactic acid fermentation broth (LAFB) under various leaching protocols (i.e. LAFB addition amount and timing) was investigated. Results revealed that compared with that in pure lactic acid solution, the synergistic effect of various substances in LAFB was more favourable to the dissolution of heavy metals. Although the content of acid-soluble heavy metals in MSWIFA decreased after leaching with LAFB, the leaching toxicity measured by acetic acid buffer solution method increased to varying degrees (except that of Cr). Moreover, the maximum leaching concentration of Pb was 14.1 mg/L (standard limit, 0.25 mg/L), which was not conducive to the landfill treatment of MSWIFA. However, if the LAFB-treated MSWIFA was used in cement kiln for co-disposal, the amount of MSWIFA entering the kiln was 6.0 percentage points higher than that in pure water leaching. Therefore, LAFB leaching instead of water leaching is expected to be an effective pre-treatment method for the utilisation of MSWIFA.

Rapid-in-house composting of organic solid wastes with fly ash supplementation: Performance evaluation at thermophilic exposures

The present work was envisaged to design, fabricate, and evaluate the performance of rapid in-house composters (RICs) for composting of organic wastes comprising kitchen waste and brown waste with fly ash supplementation in the fixed combination. The prime objective of the present study was to evaluate the ideal operating temperature suitable for rapid action of pro-composting microorganisms in indigenously developed RIC. Four identical RICs were exposed to temperatures of 40 ℃, 45  ℃, 55 ℃, and 65 ℃, respectively. The factors governing the composting process were regulated through specifically designed components. Qualitative parameters like pH, moisture content (MC), C/N ratio and heavy metals were analyzed at regular intervals. Principal component analysis was used to evaluate the relationship between the obtained results. The RIC with 55 ℃ temperature exposure, 70% MC for nine days and aeration at 4 L per minute exhibited the best results with 15.13C/N ratios of compost.

Effect of Filler Particle Size on the Recyclability of Fly Ash Filled HDPE Composites

Fly ash polymer composites are innovative high-performance materials that reduce the environmental worries and disposal complications of heavy industry produced fly ash. This study developed and characterized such composites of high-density polyethylene (HDPE) matrices and found that the use of small (50–90 µm) particles of fly ash could give rise to the tensile modulus (~95%) and tensile strength (~7%) of their reinforced composites when compared to neat HDPE materials. While these results themselves convey a strong message of how fly ash can be effectively utilized, this was not the key aim of the current study. The study was extended to examine the effect of fly ash particle size on the recyclability of relevant HDPE composites. The extrusion-based multiple recycling of composites gave slightly lower mechanical properties, primarily due to filler/matrix delamination when large fly ash particles were used. Compared to freshly made fly ash-filled HDPE composites, although using small (50–90 µm) fly ash particles reduced the tensile modulus and tensile strength of recycled composites, the values were still far above those from neat HDPE materials. This novel insight directs the effective utilization of fly ash and provides long-term sustainable and economical solutions for their practical applicability.

Evaluation of Coal Fly Ash for Modulating the Plant Growth, Yield, and Antioxidant Properties of Daucus carota (L.): A Sustainable Approach to Coal Waste Recycling

In search of a safe, cost-effective, and sustainable method for the disposal and management of coal fly ash (CFA), seeds of carrot were sown in earthen pots containing growth substrate consisting of field soil amended with different concentrations of weathered CFA at w/w % ratios. Results suggested that CFA added many essential plant nutrients to the growth substrate and improved some important soil characteristics such as pH, electric conductivity, porosity, and water holding capacity. The growth substrate containing 15% of CFA proved most suitable for growing carrots. Plants grown in 15% CFA amended soil had significantly (p ≤ 0.05) enhanced plant growth, yield, photosynthetic pigments, nitrate reductase activity, protein, and carbohydrate contents as compared to the control. The activity of antioxidant enzymes such as SOD and CAT was significantly upregulated in 15% CFA amended soil as compared to the control. The biomineralization of various elements in the edible part of the carrot was well under the limits and no toxic metal was detected in the edible part of the carrot. The present study, therefore, attempts to delineate the application of weathered CFA as a soil amendment in agroecosystems to improve the productivity of lands through a cost-effective and an ecofriendly manner.

Impact of the low and high concentrations of fly ash amended soil on growth, physiological response, and yield of pumpkin (Cucurbita moschata Duch. Ex Poiret L.)

Fly ash, a result of coal burning in thermal power plants, is sustainably used in agriculture and has been regarded as a problematic solid waste worldwide. The presence of some desired nutrients (macro and micro) and its porosity makes it a marvelous soil amendment for plant growth and development. The present study was done to evaluate the effect of different fly ash levels on pumpkin crop (Cucurbita moschata). Pot experiment in randomized block design was conducted with different fly ash supplement treatments to analyze the impact of fly ash on growth, chlorophyll, carotenoid, biochemical parameters, and pumpkin crop yield. The results show variation in soil's physical and chemical properties after the application of fly ash (30 and 50%). Also, the lower levels (10-30%) of fly ash amended soil significantly (P ≤ 0.05) enhanced the growth (plant height, plant fresh and dry biomass, no. of leaves, and average area of the leaf), chlorophyll content, and biochemical contents (protein, carbohydrate, mineral, and leaf water content) in pumpkin crop. The proline content was also observed to enhance by the increasing levels of fly ash to soil. The yield parameters in terms of a number of flowers and fruits, fruits' length and diameter, and fresh and dry weight of fruits were also significantly increased in amended soil with 10-30% fly ash. On the other hand, the higher doses, i.e., 40% and 50% of fly ash showed a negative effect and reduced the growth, chlorophyll, carotenoid, biochemical content, proline, and yield in pumpkin crop. We concluded that the lower level of fly ash (up to 30%) could be used as fertilizer in agricultural fields for the improvement of vegetable as well as other food crops in a sustainable manner but the higher level of fly ash (40 and 50%) is toxic to the plant.

Utilization of coal fly ash in China: a mini-review on challenges and future directions

The rapid economic development in China places a large demand for energy, and as a result, thermal power plants in China are producing an enormous amount of coal fly ash (CFA) which causes severe environmental pollution. This paper briefly describes the current production and utilization status of CFA in China and identifies the challenges confronting sustainable CFA utilization as the Chinese economy is being transformed. These issues include a regional imbalance in supply and demand, reducing demand in the real estate industry as well as stricter laws for environmental protection. Viable directions for future CFA utilization are proposed, for example, production of CFA-based ceramic tiles, recovery of elemental resources, agricultural melioration, treatment of wastewater and flue gas, and production of high-volume CFA concretes. This paper has some guiding significance for sustainable and cleaner utilization of CFA in China and even worldwide. Graphical abstract.

Distribution and emissions of trace elements in coal-fired power plants after ultra-low emission retrofitting

Various hazardous trace elements emitted from anthropogenic activities are attracting increasing public awareness. This study comprehensively explored the distribution and emissions of trace elements in coal-fired power plants (CFPPs) after ultra-low emission retrofitting by conducting field experiments, literature surveys, and model calculations. High levels of volatile Hg and semi-volatile As/Pb were mainly observed in fly ash and gypsum (96.6%-98.5%), while the proportion of non-volatile Cr in bottom ash was 9.23%. The Hg and As/Pb removal efficiencies were remarkably improved by ultra-low emission retrofitting, increasing by 5.67% and 2.08%/2.63%, respectively. However, ULE retrofitting only slightly affected (0.17%) non-volatile elements. These improvements were mainly attributed to the low-low-temperature electrostatic precipitator. Owing to the enhanced particle-capturing efficiencies, the concentrations of trace elements in the emitted gas of the tested CFPPs were low, ranging from 0.21-1.50 μg/m³, but accounted for a high proportion of the gas phase (61.8%-100%). Based on the national database of coal quality and their behaviour in CFPPs, we found that most of the concentrations of trace elements emitted from Chinese CFPPs were significantly lower than the internationally existing emission limits. However, owing to the skewed distribution characteristics of the emitted concentrations, we suggest issuing or revising the corresponding emission limits and improving the control of intense trace element pollution in China.

Migration and emission behavior of arsenic and selenium in a circulating fluidized bed power plant burning arsenic/selenium-enriched coal

Arsenic (As) and selenium (Se) pollution caused by coal combustion is receiving increasing concerns. The environmental impacts of As/Se are determined not only by stack emission but also by leaching process from combustion byproducts. For a better control of As/Se emission from As/Se-enriched coal combustion, this study investigated the migration and emission behavior of As/Se in a circulating fluidized bed (CFB) power plant equipped with fabric filter (FF) and wet flue gas desulfurization (WFGD) system. The results demonstrated that arsenic was both enriched in bottom ash (41.4-47.6%) and fly ash (52.4-58.6%), while selenium was mainly captured by fly ash (73.9-83.4%). Limestone injection into furnace promoted As/Se retention in ash residues. Arsenic was mainly converted into arsenate in high-temperature regions and partly trapped in bottom ash as arsenite. In contrast, selenium capture mainly occurred in low-temperature flue gas by the formation of selenite, because of the poor thermal stability of most selenite. Triplet-tank method can totally remove arsenic in WFGD wastewater. And 18.4-58.7% of selenium was removed, resulting from the precipitation of Se⁴⁺ anions with highly soluble Se⁶⁺ anions remaining in wastewater. The concentrations of As and Se in the stack emission were 0.25-1.02 and 0.96-2.24 μg/m³, receptively. The CFB boiler equipped with FF + WFGD was shown to provide good control of the As/Se emission into the atmosphere. Leaching tests suggested that more attention should be paid to As leachability from fly ash/gypsum, and Se leachability from gypsum/sludge.

The influences of fly ash on stabilization for Cd in contaminated soils

Soil contaminated with potentially toxic metals (PTMs) has being a global environmental issue, which needs to be addressed on the priority basis. Fly ash (FA) is a kind of low-cost alkaline materials, which has been widely used in remediation of soil contaminated by PTMs, while the effects of FA on the stability for PTMs in contaminated farmland soil are still not clearly evaluated. In this study, cadmium (Cd) contaminated soil samples, collected from Shaanxi (SX), Hubei (HB), and Zhejiang (ZJ) province of China, were amended with FA addition (0, 1%, 2.5%, 5%, and 10% dose), and 1-year changes of Cd availability in soil samples were focused on. In addition, biological assessment method through pot culture was carried out to evaluate the reuse potential of Cd contaminated soils amended by FA. The result indicated that FA had a notable impact on decreasing the Cd mobility of SX soil (sand type), with 18.2~52.1% reduction in the DTPA extractable solution, followed by HB soil with 5.9~16.7% reduction, but no obvious effect of FA on ZJ soil (clay type) was observed. Furthermore, the results of pot experiment revealed that FA application could increase the biomass of Chinese cabbage. However, the DTPA extractable Cd in soils after planation and the Cd accumulation of plant increased. The results revealed that FA was not a promising soil stabilizer to immobilize HMs in Cd contaminated soil, and careful consideration should be given to Cd contaminated soils with FA restoration especially in their using for farmland productive due to the remaining risk of Cd bioavailability. These results also contributed to provide references for similar soil pollution remediation.

Protocol for measuring indoor exposure to coal fly ash and heavy metals, and neurobehavioural symptoms in children aged 6 to 14 years old

INTRODUCTION

Fly ash is a waste product generated from burning coal for electricity. It is comprised of spherical particles ranging in size from 0.1 µm to over 100 µm in diameter that contain trace levels of heavy metals. Large countries such as China and India generate over 100 million tons per year while smaller countries like Italy and France generate 2 to 3 million tons per year. The USA generates over 36 million tons of ash, making it one of the largest industrial waste streams in the nation. Fly ash is stored in landfills and surface impoundments exposing communities to fugitive dust and heavy metals that leach into the groundwater. Limited information exists on the health impact of exposure to fly ash. This protocol represents the first research to assess children's exposure to coal fly ash and neurobehavioural outcomes.

METHODS

We measure indoor exposure to fly ash and heavy metals, and neurobehavioural symptoms in children aged 6 to 14 years old. Using air pollution samplers and lift tape samples, we collect particulate matter ≤10 µm that is analysed for fly ash and heavy metals. Toenails and fingernails are collected to assess body burden for 72 chemical elements. Using the Behavioural Assessment and Research System and the Child Behaviour Checklist, we collect information on neurobehavioural outcomes. Data collection began in September 2015 and will continue until February 2021.

ETHICS AND DISSEMINATION

This study was approved by the Institutional Review Boards of the University of Louisville (#14.1069) and the University of Alabama at Birmingham (#300003807). We have collected data from 267 children who live within 10 miles of two power plants. Children are at a greater risk for environmental exposure which justifies the rationale for this study. Results of this study will be distributed at conferences, in peer-reviewed journals and to the participants of the study.

A review on fly ash from coal-fired power plants: chemical composition, regulations, and health evidence

Throughout the world, coal is responsible for generating approximately 38% of power. Coal ash, a waste product, generated from the combustion of coal, consists of fly ash, bottom ash, boiler slag, and flue gas desulfurization material. Fly ash, which is the main component of coal ash, is composed of spherical particulate matter with diameters that range from 0.1 μm to >100 μm. Fly ash is predominately composed of silica, aluminum, iron, calcium, and oxygen, but the particles may also contain heavy metals such as arsenic and lead at trace levels. Most nations throughout the world do not consider fly ash a hazardous waste and therefore regulations on its disposal and storage are lacking. Fly ash that is not beneficially reused in products such as concrete is stored in landfills and surface impoundments. Fugitive dust emissions and leaching of metals into groundwater from landfills and surface impoundments may put people at risk for exposure. There are limited epidemiological studies regarding the health effects of fly ash exposure. In this article, the authors provide an overview of fly ash, its chemical composition, the regulations from nations generating the greatest amount of fly ash, and epidemiological evidence regarding the health impacts associated with exposure to fly ash.

Synthesis of Zeolites from Greek Fly Ash and Assessment of Their Copper Removal Capacity

The objective of this study was to synthesize zeolites through fusion of lignite fly ash and NaOH or KOH pellets at 600 °C and assess their removal efficiency in terms of decontamination of solutions containing Cu(II) ions. The removal efficiency of the produced zeolites was tested in batch kinetic experiments using different zeolites and Cu(II) ion concentrations. Experimental data revealed that zeolites synthesized with the use of NaOH exhibited higher removal efficiency compared with those synthesized with the use of KOH. Kinetic data showed that the pseudo-second-order equations described well the removal process. Copper removal was mainly accomplished through the concerted action of chemisorption and intraparticle diffusion. Analytical techniques involving XRF, XRD, FTIR, SEM/EDS and XPS were used for the characterization and morphology analysis of the produced zeolites. SEM/EDS confirmed the presence of copper on the zeolite surface. XPS spectra of Cu2p at 934.3 eV proved the presence of Cu(II) oxidation state, confirming the possible formation of CuO and/or Cu-Cl.

Assessment of water-quality parameters of groundwater contaminated by fly ash leachate near Koradi Thermal Power Plant, Nagpur

Thermal power generating industries affect the surrounding environment in various ways. Fly ash escapes along with flue gases and can be found in undesirable quantities in soil and water sources in the region. The water quality of an area must be evaluated regularly to ensure the quality of potable water. The present study evaluates the pre-monsoon and post-monsoon concentrations of several important physico-chemical parameters and heavy-metal contents of groundwater samples collected from sites near the Koradi Thermal Power Plant, a major source of power generation in the Nagpur Region. The maximum amount of total dissolved solids observed during the two seasons studied were 1571 mg/l and 1591 mg/l which is within the desirable limit implying that fly ash contamination did not affect this water quality parameter. The total hardness of samples from GW-3, GW-5 and GW-9 were 844 mg/l, 775 mg/l and 675 mg/l during pre-monsoon season, while GW-3 and GW-5 along with GW-4 continued to show high levels of total hardness at 1015 mg/l, 741 mg/l and 650 mg/l, respectively. These values are higher than the permissible limit due to the high levels of ions of bicarbonate, calcium, sodium and sulphate derived from fly ash leachate. Statistical analysis showed that sulphides, total hardness, electrical conductivity and total dissolved solids were the significant water quality parameters of the region. The evaluation of the parameters found that the three water sources (GW-3, GW-5 and GW-9) out of 10 are the most affected groundwater sources of fly ash pollution.

Experimental Study on the Basic Properties of a Green New Coal Mine Grouting Reinforcement Material

Waste tires are internationally recognized as hazardous waste. Many waste tires storing in the open air for a long time will not only waste the land resources but also pollute the environment after the incineration. Meanwhile, the cumulative accumulation of fly ash in China has also been one of the largest sources of solid waste in coal mines. Under the action of high winds, the accumulated fly ash forms flying dust, which pollutes the environment and endangers human health. Herein, a new type of grouting material for floor reinforcement was developed based on solid waste products using the waste tire rubber particles and fly ash. Using this new material, disaster accidents such as flooding and casualties caused by the inrush of the floor-confined water due to floor fractures, activation, and expansion in the mining process can be greatly reduced, thereby ensuring the safety of coal mine production. The grout body was prepared using a large amount of fly ash, waste tire rubber particles and clay, and mixing additives. The ratio optimization test, uniaxial compressive strength test, permeability characteristic test, stability test, and microanalysis of mine water environment were performed. From the test results, the macrophysical and chemical properties including optimal mix ratio, compressive strength, permeability coefficient, and stability of mine water environment were obtained. The microstructural properties of the grouts were analyzed using scanning electron microscopy microanalysis methods. Considering the situation of the coal floor and attempting to use as many solid waste products as possible, the optimized proportion that can meet the requirements of low cost, high bonds, and dense filling is as follows: 20% of rubber particles, 65% of fly ash, 15% of clay, and 1% of nanosilica. Furthermore, this study can provide scientific reference for large-scale floor grouting reinforcement and large-scale utilization of solid waste products.

Suitability of Brahmi (Bacopa monnieri L.) cultivation on fly ash-amended soil for better growth and oil content

Sustainable application of fly ash and its management in agriculture is a major challenge nowadays. A pot culture experiment was conducted to find out the most suitable level of fly ash application for soil amendments that can improve the plant growth and productivity of Brahmi (Bacopa monnieri L.). After growing seedlings of B. monnieri under different levels of fly ash for 90 days, a significant increase in plant biomass, essential oil content and tolerance index (more than 100%) was observed under 25% of fly ash amended soil in comparison to garden soil and higher fly ash treatments. Leaf chlorophyll content and photosynthetic parameters were remained unchanged under 25% of fly ash as compared to seedlings grown on garden soil. However, these parameters were significantly declined under higher concentrations of fly ash treatments. Higher levels of fly ash caused oxidative damage and the induction of some antioxidative enzymes activities in B. monnieri indicates its capability to endure oxidative stress tolerance. Overall, our study showed that 25% of fly ash can be used as soil amendment for cultivation of B. monnieri L. leading to enhance plant biomass and essential oil production.

Mineralogical phase separation and leaching characteristics of typical toxic elements in Chinese lignite fly ash

To investigate the distribution characteristics of typical toxic elements in different mineralogical phases of fly ash is of significance when fly ash is comprehensively utilized. In this study, lignite fly ash can be preliminarily separated into three mineralogical phases: unburned lignite, iron microbeads and aluminate-silicate microbeads by two methods namely screening and dry magnetic separation. Then, the aluminate-silicate microbeads were subjected to two-step leaching. The first step was to investigate whether toxic elements migrated easily in the environment by column leaching test. In the second step, the aluminate-silicate microbeads were stripped from the surface of the particles to the internal by the acid-base combined leaching method, then the structural characteristics of the product and the trend of toxic elements content were explored. The results showed that there were few toxic elements in unburned lignite and the toxic elements Cr, Ni, Mo and Cd had a relatively high proportion in the iron microbeads. Column leaching results showed that the toxic elements V, Cr, Mn, Co, Cu, Hg and Pb had higher leaching rates, which proved that these elements were significantly enriched on the surface of the particles and easily migrated in the environment. Cr, Mo, Cd and W were highly enriched in the quartz-mullite mixture. Mn, Co, Ni, Cu, Zn and As were highly enriched in the amorphous component. The toxic elements exhibited different leaching rules during the acid-base combined leaching process revealing the complex embedded relationship with constant elements.

Aluminosilicate Nanocomposites from Incinerated Chinese Holy Joss Fly Ash: A Potential Nanocarrier for Drug Cargos

An incredible amount of joss fly ash is produced from the burning of Chinese holy joss paper; thus, an excellent method of recycling joss fly ash waste to extract aluminosilicate nanocomposites is explored. The present research aims to introduce a novel method to recycle joss fly ash through a simple and straightforward experimental procedure involving acidic and alkaline treatments. The synthesized aluminosilicate nanocomposite was characterized to justify its structural and physiochemical characteristics. A morphological analysis was performed with field-emission transmission electron microscopy, and scanning electron microscopy revealed the size of the aluminosilicate nanocomposite to be ~25 nm, while also confirming a uniformly spherical-shaped nanostructure. The elemental composition was measured by energy dispersive spectroscopy and revealed the Si to Al ratio to be 13.24 to 7.96, showing the high purity of the extracted nanocomposite. The roughness and particle distribution were analyzed using atomic force microscopy and a zeta analysis. X-ray diffraction patterns showed a synthesis of faceted and cubic aluminosilicate crystals in the nanocomposites. The presence of silica and aluminum was further proven by X-ray photoelectron spectroscopy, and the functional groups were recognized through Fourier transform infrared spectroscopy. The thermal capacity of the nanocomposite was examined by a thermogravimetric analysis. In addition, the research suggested the promising application of aluminosilicate nanocomposites as drug carriers. The above was justified by an enzyme-linked apta-sorbent assay, which claimed that the limit of the aptasensing aluminosilicate-conjugated ampicillin was two-fold higher than that in the absence of the nanocomposite. The drug delivery property was further justified through an antibacterial analysis against Escherichia coli (gram-negative) and Bacillus subtilis (gram-positive).

Effect of co-combusted sludge in waste incinerator on heavy metals chemical speciation and environmental risk of horizontal flue ash

Incineration of sludge in waste incinerators is a trend of sludge disposal, and the problem of heavy metal in horizontal flue ash is a concern. Horizontal flue ash in waste incinerator was collected before and after the sludge was co-combusted. XRF, SEM-DES, and ICP were used to characterize the effect of sludge on the distribution of heavy metals on different heated surfaces. Potential ecological risk index of all horizontal flue ash was higher than 600, indicating the high ecological risk. After adding sludge for co-combustion, heavy metals content in all ash sample increased. As for chemical speciation of heavy metals, the addition of sludge increased the content of mild acid-soluble fraction, reducible fraction and oxidizable fraction of heavy metals, while decreased that of the residual fraction. Environmental pollution and potential ecological risks of heavy metals were increased when sludge was co-combusted. The fitting relation between the heavy metals content of each speciation and the gas temperature and the sludge mixing amount was given, which could be used to predict the heavy metal content in horizontal flue ash.

Fly ash and zeolite decrease metal uptake but do not improve rice growth in paddy soils contaminated with Cu and Zn

Fly ash (FA) and zeolite (Z) are known to reduce bioavailability of metals in soils via immobilization; however, these amendments may not only immobilize metals such as copper (Cu) and zinc (Zn), but also reduce nitrogen (N) and phosphorus (P) availability in the soils via sorption (for N by Z) and precipitation (for P by FA). This study was conducted to evaluate the effects of application of FA and Z (0, 5, and 10% rate) on the availability of nutrients as well as metals in the metal-contaminated soils cultivated with paddy rice (Oryza sativa L.). Both FA and Z reduced Cu and Zn uptake by rice while increasing metal retention in the soils regardless of the application rates. However, reduced uptake of metals did not translate into increase in rice growth, especially at the 10% of amendment rates, due to decreased nutrient uptake as indicated by higher NH₄⁺ and available P concentration in the soils amended with Z and FA, respectively, which inhibited tillering in the early rice growth period and thus reduced biomass accumulation at maturity. Our results suggest that FA and Z may reduce Cu and Zn uptake by rice in the soils contaminated with the metals; however, the availability of N and P is likely to be co-decreased. We suggest that the capacities of FA and Z to immobilize nutrients as well as metals need to be considered prior to using the amendments in metal-contaminated rice paddies.

Enhanced soil fertility, plant growth promotion and microbial enzymatic activities of vermicomposted fly ash

It is reported that coal consumption in the Asia-Pacific region is going to increase to about 87.2 percent by 2035. Management of coal combustion residues (CCRs) generated by industries is a major bottleneck towards handling the repercussions of coal usage. The present study investigates a management technique for these potentially hazardous wastes by means of vermicomposting. In the present investigation, studies were made on the effects of various concentrations of vermicomposted fly ash (VCF) added to agricultural soil, on the growth and yield of tomato (Lycopersicon esculentum Mill.) and brinjal (Solanum melongena L.) plants. The toxicity of trace elements in VCF were estimated using coefficient of pollution and potential ecological risk index, which revealed no apparent risks to the environment. A gradual increase in VCF concentrations in the agricultural soil improved the physico-chemical properties, enzymatic activities, microbial biomass, carbon and microbial population upto 90 days after sowing of seeds. The VCF amendments significantly (p < 0.05) improved the soil quality (2.86% nitrogen and 1.05% Phosphorous) and germination percentage (82.22%) of seeds in L. esculentum and also in S. melongena. The results of this study reveal that, CCRs can be effectively managed in agriculture specially in developing economies.