Spectrophotometric determination of trace hydrogen peroxide via the oxidative coloration of DPD using a Fenton system

Ultrasensitive and specific photoelectrochemical sensor for hydrogen peroxide detection based on pillar[5]arene-functionalized Au nanoparticles and MWNTs hybrid BiOBr heterojunction

A photoelectrochemical sensor for target detection of hydrogen peroxide was designed based on a new heterojunction nanocomposite which was sulfhydryl-borate ester-modified A1/B1-type pillar[5]arene (BP5)-functionalized Au NPs and multi-walled carbon nanotubes hybridized with bismuth bromide oxide (Au@BP5/MWNTs-BiOBr). The specific sensor was based on the direct induction of oxidation by hydrogen peroxide of the borate ester group of pillar[5]arene. Additionally, the local surface plasmon resonance (LSPR) of Au NPs enhanced visible light capture, the host-guest complexation of BP5 with H2O2 enhanced photocurrent response, the layer-by-layer stacked nanoflower structure of BiOBr provided large specific surface area with more active sites, and the conductivity of MWNTs enhanced the charge separation efficiency and significantly improves the stability of PEC. Their synthesis effect significantly increased the photocurrent signal and further enhanced the detection result. Under the optimal conditions, the linear concentration range of H2O2 detected by the Au@BP5/MWNTs-BiOBr sensor was from 1 to 60 pmol/L. The limit of detection (LOD) and the limit of quantification (LOQ) of the method were 0.333 pmol/L and 1 pmol/L, respectively, and the sensitivity was 6.471 pmol/L. Importantly, the PEC sensor has good stability, reproducibility, and interference resistance and can be used for the detection of hydrogen peroxide in real cells.

Ozonated Sunflower Oil Embedded within Spray-Dried Chitosan Microspheres Cross-Linked with Azelaic Acid as a Multicomponent Solid Form for Broad-Spectrum and Long-Lasting Antimicrobial Activity

Multicomponent solid forms for the combined delivery of antimicrobials can improve formulation performance, especially for poorly soluble drugs, by enabling the modified release of the active ingredients to better meet therapeutic needs. Chitosan microspheres incorporating ozonated sunflower oil were prepared by a spray-drying method and using azelaic acid as a biocompatible cross-linker to improve the long time frame. Two methods were used to incorporate ozonated oil into microspheres during the atomization process: one based on the use of a surfactant to emulsify the oil and another using mesoporous silica as an oil absorbent. The encapsulation efficiency of the ozonated oil was evaluated by measuring the peroxide value in the microspheres, which showed an efficiency of 75.5-82.1%. The morphological aspects; particle size distribution; zeta potential; swelling; degradation time; and thermal, crystallographic and spectroscopic properties of the microspheres were analyzed. Azelaic acid release and peroxide formation over time were followed in in vitro analyses, which showed that ozonated oil embedded within chitosan microspheres cross-linked with azelaic acid is a valid system to obtain a sustained release of antimicrobials. In vitro tests showed that the microspheres exhibit synergistic antimicrobial activity against P. aeruginosa, E. coli, S. aureus, C. albicans and A. brasiliensis. This makes them ideal for use in the development of biomedical devices that require broad-spectrum and prolonged antimicrobial activity.

Interactions between inhalable aged microplastics and lung surfactant: Potential pulmonary health risks

The relationship between microplastics (MPs) and human respiratory health has garnered significant attention since inhalation constitutes the primary pathway for atmospheric MP exposure. While recent studies have revealed respiratory risks associated with MPs, virgin MPs used as plastic surrogates in these experiments did not represent the MPs that occur naturally and that undergo aging effects. Thus, the effects of aged MPs on respiratory health remain unknown. We herein analyzed the interaction between inhalable aged MPs with lung surfactant (LS) extracted from porcine lungs vis-à-vis interfacial chemistry employing in-vitro experiments, and explored oxidative damage induced by aged MPs in simulated lung fluid (SLF) and the underlying mechanisms of action. Our results showed that aged MPs significantly increased the surface tension of the LS, accompanied by a diminution in its foaming ability. The stronger adsorptive capacity of the aged MPs toward the phospholipids of LS appeared to produce increased surface tension, while the change in foaming ability might have resulted from a variation in the protein secondary structure and the adsorption of proteins onto MPs. The adsorption of phospholipid and protein components then led to the aggregation of MPs in SLF, where the aged MPs exhibited smaller hydrodynamic diameters in comparison with the unaged MPs, likely interacting with biomolecules in bodily fluids to exacerbate health hazards. Persistent free radicals were also formed on aged MPs, inducing the formation of reactive oxygen species such as superoxide radicals (O2•-), hydrogen peroxide (HOOH), and hydroxyl radicals (•OH); this would lead to LS lipid peroxidation and protein damage and increase the risk of respiratory disease. Our investigation was the first-ever to reveal a potential toxic effect of aged MPs and their actions on the human respiratory system, of great significance in understanding the risk of inhaled MPs on lung health.

A H2O2-specific fluorescent probe for evaluating oxidative stress in pesticides-treated cells, rice roots and zebrafish

Hydrogen peroxide (H2O2) plays an irreplaceable role in the evaluation of the redox status in versatile circumstances. The levels of H2O2 can be affected by both internal and external stimuli, including environmental hazards. Abnormal production of H2O2 is a common characteristic of pesticide-caused damage. Therefore, H2O2 levels can intuitively and conveniently reflect the oxidative stress caused by various pesticides in cells and organisms. However, reliable and convenient monitoring of H2O2 in living cells is still limited by the lack of specific imaging probes. In this study, a fluorescent probe (HBTM-HP) was developed for in situ observation of H2O2 fluctuations caused by pesticide treatment over time in mammalian cells, rice roots and zebrafish. HBTM-HP showed high sensitivity and selectivity for H2O2. Fluorescence imaging results confirmed that HBTM-HP could be applied to reveal H2O2 production induced by multiple pesticides. This study revealed that HBTM-HP could serves as a versatile tool to monitor the redox status related to H2O2 both in vitro and in vivo upon exposure to pesticides, and also provides a basis for clarifying the mechanisms of pesticides in physiological and pathological processes.

A Novel Spectrophotometric Method for Determination of Percarbonate by Using N, N-Diethyl-P-Phenylenediamine as an Indicator and Its Application in Activated Percarbonate Degradation of Ibuprofen

Sodium percarbonate (SPC) concentration can be determined spectrophotometrically by using N, N-diethyl-p-phenylenediamine (DPD) as an indicator for the first time. The ultraviolet-visible spectrophotometry absorbance of DPD•+ measured at 551 nm was used to indicate SPC concentration. The method had good linearity (R2 = 0.9995) under the optimized experimental conditions (pH value = 3.50, DPD = 4 mM, Fe2+ = 0.5 mM, and t = 4 min) when the concentration of SPC was in the range of 0-50 μM. The blank spiked recovery of SPC was 95-105%. The detection limit and quantitative limit were 0.7-1.0 μM and 2.5-3.3 μM, respectively. The absorbance values of DPD•+ remained stable within 4-20 min. The method was tolerant to natural water matrix and low concentration of hydroxylamine (<0.8 mM). The reaction stoichiometric efficiency of SPC-based advanced oxidation processes in the degradation of ibuprofen was assessed by the utilization rate of SPC. The DPD and the wastewater from the reaction were non-toxic to Escherichia coli. Therefore, the novel Fe2+/SPC-DPD spectrophotometry proposed in this work can be used for accurate and safe measurement of SPC in water.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.

Research Progress of SERS Sensors Based on Hydrogen Peroxide and Related Substances

Hydrogen peroxide (H2O2) has an important role in living organisms, and its detection is of great importance in medical, chemical, and food safety applications. This review provides a comparison of different types of Surface-enhanced Raman scattering (SERS) sensors for H2O2 and related substances with respect to their detection limits, which are of interest due to high sensitivity compared to conventional sensors. According to the latest research report, this review focuses on the sensing mechanism of different sensors and summarizes the linear range, detection limits, and cellular applications of new SERS sensors, and discusses the limitations in vivo and future prospects of SERS technology for the detection of H2O2.

Non-Solvatochromic Cell Membrane-Targeted NIR Fluorescent Probe for Visualization of Polarity Abnormality in Drug-Induced Liver Injury Mice

Noninvasive visualization of liver polarity by using fluorescence imaging technology is helpful to better understand drug-induced liver injury (DILI). However, cell membrane-targeted polarity-sensitive near-infrared (NIR) fluorescent probes are still scarce. Herein, we report a non-solvatochromic cell membrane-targeted NIR small molecular probe (N-BPM-C10) for monitoring the polarity changes on cell membranes in living cells and in vivo. N-BPM-C10 exhibits polarity-dependent fluorescence around 655 nm without an obvious solvatochromic effect, which endows it with good capability for the in vivo imaging study. Moreover, it can rapidly and selectively light up the cell membranes as well as distinguish tumor cells from normal cells due to its excellent polarity-sensitive ability. More importantly, N-BPM-C10 has been successfully applied to visualize liver polarity changes in vivo, revealing the reduction of liver polarity in DILI mice. We believe that N-BPM-C10 provides a new way for the diagnosis of DILI.

Boosting Photo-Electro-Fenton Process Via Atomically Dispersed Iron Sites on Graphdiyne for InVitro Hydrogen Peroxide Detection

Hydrogen peroxide (H2 O2 ) is essential in oxidative stress and signal regulation of organs of animal body. Realizing in vitro quantification of H2 O2 released from organs is significant, but faces challenges due to short lifetime of H2 O2 and complex bio-environment. Herein, rationally designed and constructed a photoelectrochemical (PEC) sensor for in vitro sensing of H2 O2 , in which atomically dispersed iron active sites (Hemin) modified graphdiyne (Fe-GDY) serves as photoelectrode and catalyzes photo-electro-Fenton process. Sensitivity of Fe-GDY electrode is enhanced 8 times under illumination compared with dark condition. The PEC H2 O2 sensor under illumination delivers a wide linear range from 0.1 to 48 160 µm and a low detection limit of 33 nm, while demonstrating excellent selectivity and stability. The high performance of Fe-GDY is attributed to, first, energy levels matching of GDY and Hemin that effectively promotes the injection of photo-generated electrons from GDY to Fe3+ for reduced Fe2+ , which facilitates the Fe3+ /Fe2+ cycle. Second, the Fe2+ actively catalyzes H2 O2 to OH- through the Fenton process, thereby improving the sensitivity. The PEC sensor demonstrates in vitro quantification of H2 O2 released from different organs, providing a promising approach for molecular sensing and disease diagnosis in organ levels.

A simple spectrophotometric determination of hydrogen peroxide solution via spectral delta from redox reaction with sodium hypochlorite

Hydrogen peroxide (H₂O₂) is widely used in the synthesis of organic chemicals, bleaching of paper pulp, and the treatment of wastewater and as a food additive, important mediator of redox processes in natural water, and a disinfectant. However, H₂O₂ stock solution is unstable and slowly decomposes when exposed to, for example, light, elevated temperatures, or metal compounds. Therefore, the ability to measure the exact concentration of H₂O₂ stock solution is important for its proper use in diverse applications. This work proposes a simple method for the spectrophotometric determination of H₂O₂ solution via chemical reaction with sodium hypochlorite that is inexpensive and easy to acquire. The proposed method is based on the stoichiometric spectral change of hypochlorite ion at 292.5 nm following a redox reaction with a sample solution of H₂O₂. Due to high relationship between the spectral delta value and the applied H₂O₂ concentration (0.00188-0.03000%), H₂O₂ stock solution can be easily quantified.

Visible-Light-Promoted Switchable Selective Oxidations of Styrene Over Covalent Triazine Frameworks in Water

Using photocatalytic oxidation to convert basic chemicals into high value compounds in environmentally benign reaction media is a current focus in catalytic research. The challenge lies in gaining controllability over product formation selectivity. We design covalent triazine frameworks as heterogeneous, metal-free, and recyclable photocatalysts for visible-light-driven switchable selective oxidation of styrene in pure water. Selectivity in product formation was achieved by activation or deactivation of the specific photogenerated oxygen species. Using the same photocatalyst, by deactivation of photogenerated H₂ O₂ , benzaldehyde was obtained with over 99 % conversion and over 99 % selectivity as a single product. The highly challenging and sensitive epoxidation of styrene was carried out by creating peroxymonocarbonate as an initial epoxidation agent in the presence of bicarbonate, which led to formation of styrene oxide with a selectivity up to 76 % with near quantitative conversion. This study demonstrates a preliminary yet interesting example for simple control over switchable product formation selectivity for challenging oxidation reactions of organic compounds in pure water.

High-performance liquid chromatography using diode array detector and fluorescence detector for hydrogen peroxide analysis in processed fishery foods

Hydrogen peroxide (H2O2) is a food additive for bleaching and sterilization, owing to its strong oxidizing effect. The current study aimed to develop analytical methods to detect trace amounts of residual H2O2 in diverse foods using high-performance liquid chromatography (HPLC) equipped with diode array detector (DAD) or fluorescence detector (FLD). The vanadium(V)-peroxo complex, derived from the reaction of H2O2 with ammonium metavanadate, was used for the detection of H2O2 with DAD. H2O2 was indirectly analyzed using FLD via the detection of 7-hydroxycoumarin, derived by Fenton reaction, followed by verification using liquid chromatography with tandem mass spectrometry analysis. Both the detection methods showed good linearity with R2 > 0.997. Limit of detection and limit of quantification were 0.30 and 0.91 mg/L (8.82 and 26.76 μM) with HPLC-DAD and 0.001 and 0.003 mg/L (0.03 and 0.09 μM) with HPLC-FLD, respectively. Applicability of both the methods was successively tested through sample analysis.

Activity-Based Fluorescent Probes Based on Hemicyanine for Biomedical Sensing

In recent years, fluorescent probes, as an analytical tool that can target and rapidly detect analytes, have been increasingly used for applications related to medical treatment, detection, and bioimaging. Researchers are interested in hemicyanine-based fluorescent probes because of their high quantum yield, tunable spectrum characteristics, absorption and emission in the near-infrared (NIR) region, and good photo-stability. The development of these dyes and their derivatives as NIR fluorescent probes for biological applications has advanced significantly in the last ten years. This review introduces processes for making hemicyanine dyes and the methodology for creating functional activity-based fluorescent probes. A variety of hemicyanine-based probes have been systematically developed for the detection of small biomolecules in various illnesses. Finally, the potential drawbacks of hemicyanine-based functional probes, and the prospects for future research and translation into clinical medicine, are also discussed. This study is intended to provide strategies for the development and design of novel fluorescence probes.

A novel near-infrared fluorescent probe for visualization of intracellular hydrogen peroxide

Hydrogen peroxide (H₂O₂) as a crucial reactive oxygen species (ROS) plays a crucial role in redox signaling in physiological and pathological processes of living cells. Its normal production is closely related to signal transduction of living cells. Overproduction of H₂O₂in vivo has been proved to be related to many diseases. Some were developed to reveal the roles of H₂O₂. However, current fluorescent probes for the detection of H₂O₂ are restricted in their short emission wavelengths and small Stokes shifts that significantly decrease the sensitivity of detection and cellular visualization. In this work, a novel fluorescent probe BC-B was designed and synthesized with pinacol phenylboronic acid ester as a recognition group and near-infrared fluorophore BC-OH as a reporter group. BC-B probe exhibits a large Stokes shift (122 nm) and near-infrared emission (672 nm), showing an excellent selectivity and sensitivity in detection of H₂O₂ with the limit of 0.003 μmol/L. Confocal fluorescence imaging further demonstrates that BC-B can be used for detecting endogenous H₂O₂ in living cells.

Titanium-Porphyrin Metal-Organic Frameworks as Visible-Light-Driven Catalysts for Highly Efficient Sonophotocatalytic Reduction of Cr(VI)

In this work, we synthesized and characterized four titanium-porphyrin metal-organic frameworks (MOFs) [DGIST-1(M), M = Co(II), Fe(III), Zn(II), and H₂] and used them as visible-light-driven catalysts for sonophotocatalytic Cr(VI) reduction. DGIST-1(M) exhibited open-framework, broad light absorption stemmed from ligand and sensitive photocurrent responses owing to the integration of one-dimensional Ti-oxo chains and 4-connected conjugated TCPP ligand (TCPP = tetrakis(4-carboxyphenyl)-porphyrin). DGIST-1(M) presented efficient reduction of Cr(VI) to Cr(III) in aqueous solution when used as sonophotocatalytic catalysts. The average reduction rates upon Cr(VI) were 0.920, 0.476, 0.377, and 0.194 mg·L^-1·min^-1 for DGIST-1(H₂), DGIST-1(Zn), DGIST-1(Co), and DGIST-1(Fe), which are 1.15-2.45 times higher than those in photocatalysis. Sonophotocatalytic experiments and electron paramagnetic resonance measurement proved that Ti-oxo chain units and porphyrin ligand in the structures of DGIST-1(M) existed as catalytic active centers for sonophotocatalytic reduction of Cr(VI). Photoluminescence and UV absorption spectra revealed that the unity of photocatalysis and sonochemistry strengthened the migration of photogenerated electrons from DGIST-1(M) to Cr(VI), which improved the activities of catalysts. This study suggested that the association of titanium-porphyrin MOFs and sonophotocatalytic technology is an impactful program for enhancing MOF-based photocatalytic systems.

H2O2-Activated NIR-II Fluorescent Probe with a Large Stokes Shift for High-Contrast Imaging in Drug-Induced Liver Injury Mice

Drug-induced liver injury (DILI) is the most common clinical adverse drug reaction, which is closely associated with the oxidative stress caused by overproduced reactive oxygen species. Hepatic H₂O₂, as an important biomarker of DILI, plays a crucial role in the progression of DILI. However, there remains a challenge to develop H₂O₂-activatable second near-infrared (NIR-II, 1000-1700 nm) small molecular probes with both a large Stokes shift and a long emission wavelength beyond 950 nm. Herein, we developed an activatable NIR-II fluorescent probe (IR-990) with an acceptor-π-acceptor (A-π-A) skeleton for real-time detection of H₂O₂ in vivo. In the presence of H₂O₂, nonfluorescent probe IR-990 was successfully unlocked by generating a donor-π-acceptor (D-π-A) structure and switched on intense NIR-II fluorescence, exhibiting a peak emission wavelength at 990 nm and a large Stokes shift of 200 nm. Moreover, it was able to detect H₂O₂ with high sensitivity and selectivity in vitro (LOD = 0.59 μM) and monitor the behavior of endogenous H₂O₂ in the HepG2 cell model of DILI for the first time. Notably, probe IR-990 was successfully applied in real-time imaging of endogenous H₂O₂ generation in the DILI mouse model, showing a high signal-to-background ratio of 11.3/1. We envision that IR-990 holds great potential as a powerful diagnosis tool for real-time visualization of H₂O₂ in vivo and revealing the mechanism of DILI in the future.

A mitochondria-targeted rhodol fluorescent probe for imaging of hydrogen peroxide in living cells

Hydrogen peroxide (H₂O₂) is a main member of reactive oxygen species (ROS) in cells that has a significant impact on various physiological and pathological processes of organisms. Here, we designed and synthesized a new type of fluorescent probe Rhodol-OAc for the specific detection of H₂O₂. The probe had good water solubility, high selectivity and sensitivity to H₂O₂, low cytotoxicity, excellent mitochondrial targeting ability, etc. It was successfully applied in the imaging of exogenous and endogenous H₂O₂ in living cells. In addition, theoretical calculations were carried out to clarify the luminescence mechanism of the probe. More importantly, we successfully applied the probe to indirectly detect xanthine and glucose, the metabolism of which generates H₂O₂, and achieved satisfactory results.

Nontoxic In Vivo Clearable Nanoparticle Clusters for Theranostic Applications

Disintegrable inorganic nanoclusters (GIONs) with gold seed (GS) coating of an iron oxide core with a primary nanoparticle size less than 6 nm were prepared for theranostic applications. The GIONs possessed a broad near-infrared (NIR) absorbance at ∼750 nm because of plasmon coupling between closely positioned GSs on the iron oxide nanoclusters (ION) surface, in addition to the ∼513 nm peak corresponding to the isolated GS. The NIR laser-triggered photothermal response of GIONs was found to be concentration-dependent with a temperature rise of ∼8.5 and ∼4.5 °C from physiological temperature for 0.5 and 0.25 mg/mL, respectively. The nanoclusters were nonhemolytic and showed compatibility with human umbilical vein endothelial cells up to a concentration of 0.7 mg/mL under physiological conditions. The nanoclusters completely disintegrated at a lysosomal pH of 5.2 within 1 month. With an acute increase of over 400% intracellular reactive oxygen species soon after γ-irradiation and assistance from Fenton reaction-mediated supplemental oxidative stress, GION treatment in conjunction with radiation killed ∼50% of PLC/PRF/5 hepatoma cells. Confocal microscopy images of these cells showed significant cytoskeletal and nuclear damage from radiosensitization with GIONs. The cell viability further decreased to ∼10% when they were sequentially exposed to the NIR laser followed by γ-irradiation. The magnetic and optical properties of the nanoclusters enabled GIONs to possess a T₂ relaxivity of ∼223 mM^-1 s^-1and a concentration-dependent strong photoacoustic signal toward magnetic resonance and optical imaging. GIONs did not incur any organ damage or evoke an acute inflammatory response in healthy C57BL/6 mice. Elemental analysis of various organs indicated differential clearance of gold and iron via both renal and hepatobiliary routes.

Hydroxylamine promoted hydroxyl radical production and organic contaminants degradation in oxygenation of pyrite

The heterogeneous Fenton-like process using pyrite (FeS₂) is increasingly recognized as a promising advanced oxidation process for removal of organic contaminants. However, the slow regeneration of Fe(II) limits the generation of reactive oxygen species for environment implication. To overcome this drawback, hydroxylamine was applied to enhance the reactivity of FeS₂ to degrade organic contaminants under oxic conditions. Results showed that hydroxylamine facilitated the regeneration of Fe(II) on FeS₂ surface to promote reactive oxygen species generation, thereby efficiently degrading different organic contaminants. The underlying mechanism was further elucidated that the presence of hydroxylamine enhanced electron transfer from FeS₂ to O₂ to produce superoxide radicals (O₂^•-), hydrogen peroxide (H₂O₂) and hydroxyl radical (HO^•) via Fenton-like pathways, which induced the rapid degradation of organic contaminants (e.g., sulfamethoxazole (SMX)). The reactivity of FeS₂ for organic contaminant degradation changed negligibly after seven cycles in the presence of hydroxylamine. The effects of pH and inorganic anions on SMX degradation were also clarified in details. The finding of this study would provide a novel strategy to enhance the contaminants degradation by FeS₂-based advanced oxidation technologies for environmental remediation.

Potential health risks of the interaction of microplastics and lung surfactant

Microplastics (MPs), as pollutants of environmental concern, are correlated with increased risk of various respiratory diseases. Nevertheless, whether or not MPs have adverse influences on the interfacial properties of lung surfactant (LS), and its effect on the generation of reactive oxygen species are poorly understood. In the present study, natural LS extracted from porcine lungs was used to investigate the interaction with polystyrene as a representative MPs. The results showed that the phase behavior, surface tension, and membrane structure of the LS were altered in the presence of polystyrene. Adsorption experiments demonstrated that in the mixed system of polystyrene and LS (the main active ingredients are phospholipids and proteins), adsorption of phospholipid components by polystyrene was notably higher than that of proteins. Moreover, polystyrene can accelerate the conversion between ascorbic acid and deoxyascorbic acid, thereby producing hydrogen peroxide (HOOH) in simulated lung fluid (containing LS) and further giving rise to an increase in the content of hydroxyl radicals (•OH). This work provides new insight into the potential hazard of MPs in human respiratory system, which is helpful for deeply understanding the unfavorable physicochemical effects of MPs exposure and the role of inhaled MPs on lung health.

Facile preparation of MnO2-TiO2 nanotube arrays composite electrode for electrochemical detection of hydrogen peroxide

The MnO₂-TNTA composite electrodes were obtained through depositing MnO₂ into TiO₂ nanotube arrays (TNTA) by successive ionic layer adsorption reaction (SILAR) and subsequent hydrothermal method. The MnO₂-TNTA nanocomposites were used as electrochemical sensors for the detection of hydrogen peroxide (H₂O₂). The preparation conditions of MnO₂-TNTA electrodes and test conditions affect the electrochemical detection performance significantly. The optimal conditions are listed as follows: the number of SILAR cycles, 6 times; KMnO₄ solution temperature, 50 °C; supporting electrolyte, 0.5 M NaOH. Under these conditions, the MnO₂-TNTA electrode exhibits the best performance for detecting H₂O₂. The optimized MnO₂-TNTA electrode has a minimum detection limit of 0.6 μM (S/N = 3) and a linear range of 5 μM ∼ 13 mM, which is much superior to the previously-reported electrodes. Moreover, the optimized MnO₂-TNTA electrode possesses high selectivity, excellent stability and good reproducibility in the detection of H₂O₂. When used in the determination of H₂O₂ content in actual samples including disinfectant and milk, it also shows good accuracy, ideal recovery (96.00% ∼ 102.67%) and high precision (RSD < 4.0%).

Visible-light-driven sonophotocatalysis for enhanced Cr(VI) reduction based on mixed-linker zirconium-porphyrin MOFs

In this study, we synthesized and characterized two mixed-linker zirconium-porphyrin metal-organic frameworks, PCN-134 and PCN-138 which constructed from tetratopic light harvesting TCPP ligand and tritopic BTB/TBTB ligand (TCPP = trakis(4-carboxyphenyl)porphyrin),...

Review on oxidative stress relation on COVID-19: Biomolecular and bioanalytical approach

COVID-19 disease has put life of people in stress worldwide from many aspects. Since the virus has mutated in absolutely short period of time the challenge to find a suitable vaccine has become harder. Infection to COVID-19, especially at severe life threatening states is highly dependent on the strength of the host immune system. This system is partially dependent on the balance between oxidative stress and antioxidant. Besides, this virus still has unknown mechanism of action companied by a probable commune period. From another hand, some reactive oxygen species (ROS) levels can be helpful on the state determination of the disease. Thus it could be possible to use modern bioanalytical techniques for their detection and determination, which could indicate the disease state at the golden time window since they have the potential to show whether specific DNA, RNA, enzymes and proteins are affected. This also could be used as a preclude study or a reliable pathway to define the best optimized time of cure beside effective medical actions. Herein, some ROS and their relation with SARS-CoV-2 virus have been considered. In addition, modern bioelectroanalytical techniques on this approach from quantitative and qualitative points of view have been reviewed.

Spectrophotometric determination of hydrogen peroxide in water with peroxidase-catalyzed oxidation of potassium iodide and its applications to hydroxylamine-involved Fenton and Fenton-like systems

A spectrophotometric method for the rapid measurement of hydrogen peroxide (H₂O₂) in aqueous solutions was developed in this study. This method is based on a reaction catalyzed by peroxidase (POD) in which potassium iodide (KI) is oxidized to generate the stable yellow-colored I₃^- within 15 s. The absorbance of the generated I₃^- at both 350 nm and 400 nm had good linear relationships with H₂O₂ concentration in the range of 0-70 μM (R² > 0.999) with sensitivities of 2.34 × 10⁴ M^-1 cm^-1 and 5.30 × 10³ M^-1 cm^-1 respectively. Meanwhile, through calculation, the detection limits of the proposed POD-KI method at 350 nm and 400 nm were 0.09 μM and 0.33 μM, respectively. Even when the concentration of H₂O₂ was up to 350 μM, the absorbance of the generated I₃^- at 350 nm did not decrease observably. The generated I₃^- was found to be stable enough in ultrapure water, underground water, reservoir water and samples containing the strong reducing agent hydroxylamine. Moreover, the proposed POD-KI method was successfully used to analyze trace H₂O₂ in rainwater, and to monitor the change of H₂O₂ concentration in the Fenton, hydroxylamine/Fenton and hydroxylamine/Cu(II)/H₂O₂ systems. Overall, the POD-KI method could be adopted as a candidate method to determine H₂O₂ in Fenton and Fenton-like systems, and especially in those involving hydroxylamine.

A spectrophotometric method for measuring permanganate index (CODMn) by N,N-diethyl-p-phenylenediamine (DPD)

A new spectrophotometric method for measuring permanganate index (chemical oxygen demand using potassium permanganate (KMnO₄) as oxidant, COD_Mn) in water was established. The method was based on the rapid oxidation of N,N-diethyl-p-phenylenediamine (DPD) by residual KMnO₄ in digestion solution under neutral pH condition to form the stable pink radical (DPD^●+). Only 20 s were enough to form the pink DPD^●+. The generated DPD^●+ could be quantitatively measured by a visible spectrophotometer at 551 nm. Stoichiometric coefficient of the reaction between KMnO₄ and DPD was close to 1:5 (1:5.07). There was a well linear relationship (R² = 0.999) between the change of the absorbance of DPD^●+ at 551 nm and the concentration of COD_Mn in the range of 0-4.46 mg L^-1. Limit of detection of the DPD method was as low as 0.02 mg L^-1 COD_Mn. The DPD method was highly accurate for measuring COD_Mn in standard solutions with well recovery rates of 99.17%-102.22%, and was well tolerant to the interference of coexistent Cl^- and Fe³⁺. The DPD method was successfully applied for measuring COD_Mn in real water samples, including surface water, underground water and drinking water. In comparison to the traditional titration method, the proposed DPD method was more convenient to operate, required less samples and digestion reagents (i.e., KMnO₄ and H₂SO₄) and could be employed for online monitor.

On-line Measurement of Sub-ppb Level Hydrogen Peroxide in Ultrapure Water Production Process

An on-line H2O2 analyzer was developed for application to the ultrapure water production process, using a gasometric method. The analyzer consists of a dissolved oxygen (DO) sensor and analyzer, a catalyst that converts H2O2 to O2, and a computer that stores the DO data. H2O2 concentrations were calculated by measuring the change in DO concentration before and after the catalyst and using the calculation formula presented in this study. In order to accurately analyze a sub-ppb level of H2O2, a DO meter which can correctly measure the DO concentration at the ppb level was applied. An ion exchange resin with Pd, was selected as an appropriate catalyst since it could decompose 99% of H2O2 to O2 at a space velocity of 120/h. The minimum analysis time was 20 min, and the detection limit was observed to be 0.27 ppb. When the DO concentration of the sample was 1.5 ppb or lower, an H2O2 concentration of 1 ppb or lower was successfully measured. Good correlation, with an R2 value of 0.99, was observed between the measured and calculated H2O2 concentrations.

An Electrochemical Sensor Based on Chalcogenide Molybdenum Disulfide-Gold-Silver Nanocomposite for Detection of Hydrogen Peroxide Released by Cancer Cells

Hydrogen peroxide (H₂O₂) as a crucial signal molecule plays a vital part in the growth and development of various cells under normal physiological conditions. The development of H₂O₂ sensors has received great research interest because of the importance of H₂O₂ in biological systems and its practical applications in other fields. In this study, a H₂O₂ electrochemical sensor was constructed based on chalcogenide molybdenum disulfide-gold-silver nanocomposite (MoS₂-Au-Ag). Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and energy dispersive spectroscopy (EDS) were utilized to characterize the nanocomposites, and the electrochemical performances of the obtained sensor were assessed by two electrochemical detection methods: cyclic voltammetry and chronoamperometry. The results showed that the MoS₂-Au-Ag-modified glassy carbon electrode (GCE) has higher sensitivity (405.24 µA mM^-1 cm^-2), wider linear detection range (0.05-20 mM) and satisfactory repeatability and stability. Moreover, the prepared sensor was able to detect the H₂O₂ discharge from living tumor cells. Therefore, this study offers a platform for the early diagnosis of cancer and other applications in the fields of biology and biomedicine.

Cu(II)-enhanced degradation of acid orange 7 by Fe(II)-activated persulfate with hydroxylamine over a wide pH range

The activation of persulfate by Fe(II) coupled with hydroxylamine (the HA/Fe(II)/PS system) was highly effective for the degradation of refractory organic contaminants under acidic pH conditions. However, owing to the precipitation of ferric hydroxide and/or the slow reduction from Fe(III) to Fe(II), the HA/Fe(II)/PS system was invalid under neutral and alkaline pH conditions. In this study, it was observed that the degradation of acid orange 7 (AO7) was strongly enhanced over the wide pH range of 2-9 when trace Cu(II) (0.5-5 μM) was spiked into the HA/Fe(II)/PS system. It was evident that Cu(I) was generated via the reduction of Cu(II) by HA in the bimetallic system at both pH 3 and pH 8, and the steady concentration of Fe(II) in the bimetallic system was much higher than that in the HA/Fe(II)/PS system due to the rapid reaction between Fe(III) and Cu(I). Quenching experiments using tert-butyl alcohol, methanol and sodium bromide as the scavengers and electron spin resonance experiments confirmed that the primary reactive species responsible for AO7 degradation were sulfate radical at both pH 3 and pH 8, rather than hydroxyl radical and Cu(III). Nevertheless, sulfate radical was mainly produced by Fe(II)-activated PS at pH 3, while both Cu(I) and Fe(II) made important contributions to the generation of sulfate radical at pH 8. The bimetallic system was also highly effective in degrading other organic contaminants, such as phenol, diclofenac, reactive red 2 and orange G. This study might provide a promising idea based on Fe(II)-activated PS for degrading organic contaminants over a wide pH range.

Development of an ultrasound-enhanced smartphone colorimetric biosensor for ultrasensitive hydrogen peroxide detection and its applications

In this work, we developed the first ultrasound technique enhanced smartphone application for highly sensitive determination of hydrogen peroxide (H₂O₂). The measurement technique is based on the change in color intensity due to the transformation of tetramethylbenzidine (TMB) to oxidized tetramethylbenzidine (oxTMB) by the oxidation process with hydroxyl radical (OH˙) from the oxidation etching of silver nanoparticles (AgNPs) and its ultrasound usability. The oxTMB product occurs without peroxidase and can be detected with a saturation channel using HSV methodology via the application of a smartphone. To prove the peroxidase mimic property, our proposed method was also validated by determination of certain biomolecules, including glucose, uric acid, acetylcholine and total cholesterol, of which the known amounts are a valuable diagnostic tool. The proposed method provided the lowest limits of detection (LOD) of 2.0, 5.0, 12.50, 7.50, and 10.0 nmol L⁻¹ for H₂O₂, glucose, uric acid, acetylcholine, and cholesterol, respectively, when compared with LODs obtained from other smartphone colorimetric methods. Reproducibility was calculated from the detection of H₂O₂ at 25.0 and 50.0 nmol L⁻¹ with the highest standard deviations of 3.47 and 4.58%, respectively. Additionally, the determination of all analytes in human urine samples indicated recoveries in the range of 96–104% with the highest relative standard deviation of 3.98%, offering high accuracy and precision. Our research shows the novel compatibility of basic technology and chemical methodology with green chemistry principles by reducing a high-power process and organic solvent as well as exhibiting good colorimetric performance and effective sensitivity and selectivity. Thus, our developed method can be applied for point-of-care medical diagnosis.

In this work, we developed the first ultrasound technique enhanced smartphone application for highly sensitive determination of hydrogen peroxide (H₂O₂).

Magnetic and Photocatalytic Curcumin Bound Carbon Nitride Nanohybrids for Enhanced Glioma Cell Death

A mesoporous magnetic nanohybrid functionalized with 14 wt % carbon nitride (CN) and loaded with curcumin (Cur) has been developed as a combination platform for photodynamic therapy and magnetic hyperthermia. CN-Cur complexes on the nanoparticle surface facilitate fast charge separation of hole-electron pairs under blue LED light irradiation and subsequent singlet oxygen generation. Cur release from the nanoparticle was significant only when exposed to both lysosomal pH (pH = 5.2) and an alternating current magnetic field (AMF). The mesoporous magnetic carbon nitride (MMCN) caused a 350% increase in the level of intracellular ROS as compared to the light exposed untreated control group. The nanohybrid was non-hemolytic and found to be biocompatible with HUVEC cells at concentrations up to 360 μg/mL. A similar concentration under AMF exposure caused a localized temperature rise of 4.2 °C and resulted in a 60% reduction in C6 cell viability. The cancer cell death further increased up to 80% under sequential exposure to light and AMF. The combinatorial treatment exerted significant cytoskeletal and nuclear damage in the cancer cells as assessed by confocal microscopy. The nanohybrid also exhibited relaxivity of 88 mM^-1 s^-1, imparting significant T₂ weighted contrast to the cancer cells.

Effects of Hydrogen Peroxide and Sodium Hypochlorite Aging on Properties and Performance of Polyethersulfone Ultrafiltration Membrane

Chemical reaction of main polymer and additive with oxidative cleaning agents plays an important role in aging of polymeric membrane for water and wastewater treatment. As a green and powerful oxidant, hydrogen peroxide (H2O2) can achieve good cleaning efficacy under alkaline condition, but its influence on membrane aging was poorly understood. In this study, degradation of polyethersulfone (PES) membrane due to H2O2 exposure under alkaline condition (pH 9 and 11) was holistically investigated by humic acid (HA) filtration experiments and multiple membrane characterization techniques, with sodium hypochlorite (NaClO) aging examined as a comparison. Membrane permeability and HA retention rate was hardly changed by H2O2 aging at an exposure dose of 500 g·h/L, whereas NaClO aging led to substantial increase of membrane permeability and significant decrease of retention ability. Meanwhile, H2O2 aging slightly increased fouling propensity with HA filtration, while NaClO aging resulted in more serious fouling. ATR-FTIR and XPS analysis revealed much less degradation of PES and hydrophilic additive by H2O2 than that by NaClO, and membrane morphology and surface properties were characterized to explain the variation of filtration performance. Overall, compared with cleaning with NaClO, membrane degradation can be minimized by cleaning with H2O2.

Spectrophotometric determination of hydrogen peroxide in water by oxidative decolorization of azo dyes using Fenton system

In this study, based on the oxidative decolorization of three azo dyes (Orange G (OG), Acid Orange 7 (AO7) and Reactive Black 5 (RB5)) with hydroxyl radicals generated in Fenton system, we have successfully established three types of azo dyes spectrophotometric methods for measuring aqueous hydrogen peroxide (H₂O₂) concentration. The decolorization extent of OG, AO7 and RB5 at the corresponding characteristic wavelengths of 478 nm, 484 nm and 597 nm are proportion to the concentration of H₂O₂ in aqueous solutions. Under the selected reaction conditions, three well linear correlations between the depletion of azo dyes and the H₂O₂ concentration are established in the range of 0.45-175 μmol L^-1 of OG, 0.36-120 μmol L^-1 of AO7 and 0.44-175 μmol L^-1 of RB5, respectively. These proposed spectrophotometric methods are enough accurate to measure low concentrations of H₂O₂ in practical water samples and monitor the variations of H₂O₂ concentration during the phenol degradation in the Cu(II)/HCO₃^-/H₂O₂ process.

Multi-wavelength spectrophotometric determination of hydrogen peroxide in water by oxidative coloration of ABTS via Fenton reaction

In this study, a sensitive and low-cost multi-wavelength spectrophotometric method for the determination of hydrogen peroxide (H₂O₂) in water was established. The method was based on the oxidative coloration of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) via Fenton reaction, which resulted in the formation of green radical (ABTS^•+) with absorbance at four different wavelengths (i.e., 415 nm, 650 nm, 732 nm, and 820 nm). Under the optimized conditions (C_ABTS = 2.0 mM, C_Fe²⁺ = 1.0 mM, pH = 2.60 ± 0.02, and reaction time (t) = 1 min), the absorbance of the generated ABTS^•+ at 415 nm, 650 nm, 732 nm, and 820 nm were well linear with H₂O₂ concentrations in the range of 0-40 μM (R² > 0.999) and the sensitivities of the proposed Fenton-ABTS method were calculated as 4.19 × 10⁴ M^-1 cm^-1,1.73 × 10⁴ M^-1 cm^-1, 2.18 × 10⁴ M^-1 cm^-1, and 1.96 × 10⁴ M^-1 cm^-1, respectively. Meanwhile, the detection limits of the Fenton-ABTS method at 415 nm, 650 nm, 732 nm, and 820 nm were respectively calculated to be 0.18 μM, 0.12 μM, 0.10 μM, and 0.11 μM. The absorbance of the generated ABTS^•+ in ultrapure water, underground water, and reservoir water was quite stable within 30 min. Moreover, the proposed Fenton-ABTS method could be used for monitoring the variations of H₂O₂ concentration during the oxidative decolorization of RhB in alkali-activated H₂O₂ system.