Assessment of two extraction methods to determine pesticides in soils, sediments and sludges. Application to the Túria River Basin

Enhanced remediation of chlorpyrifos-contaminated soil by immobilized strain Bacillus H27

Chlorpyrifos is a pesticide widely used in agricultural production with a relatively long residual half-life in soil. Addressing the problem of residual chlorpyrifos is of universal concern. In this study, rice hull biochar was used as an immobilized carrier to prepare the immobilized strain H27 for the remediation of chlorpyrifos-contamination soil. Soil microorganisms after remediation were investigated by ecotoxicological methods. The immobilized strain H27 had the highest removal rate of chlorpyrifos when 10% bacterial solution was added to the liquid medium containing 0.075-0.109 mm diameter biochar cultured for 22 hr. This study on the removal of chlorpyrifos by immobilized strain H27 showed that the initial concentration of chlorpyrifos in solution was 25 mg/L, and the removal rate reached 97.4% after 7 days of culture. In the soil, the removal rate of the immobilized bacteria group increased throughout the experiment, which was significantly higher than that of the free bacteria and biochar treatment groups. The Biolog-ECO test, T-RFLP and RT-RCR were used to study the effects of the soil microbial community and nitrogen cycling functional genes during chlorpyrifos degradation. It was found that ICP group had the highest diversity index among the four treatment groups. The microflora of segment containing 114 bp was the dominant bacterial community, and the dominant microflora of the immobilized bacteria group was more evenly distributed. The influence of each treatment group on ammonia-oxidizing bacteria (AOB) was greater than on ammonia-oxidizing archaea (AOA). This study offers a sound scientific basis for the practical application of immobilized bacteria to reduce residual soil pesticides.

Extraction of pesticides from soil using direct-immersion SPME LC-Tips followed by GC-MS/MS: Evaluation and proof-of-concept

A new method was evaluated and developed for the analysis of pesticides in sandy-loam soil by direct-immersion solid phase microextraction (DI-SPME) followed by gas chromatography tandem-mass spectrometry (GC-MS/MS) determination. Ten pesticides were selected based on a literature survey of the compounds reported to be present in EU soils. The extraction was performed using SPME LC-Tips, a new SPME configuration with the coated fibers attached to a disposable and easy-to-handle micropipette tip, which was immersed into a soil slurry made by the addition of an aqueous solution to the soil sample. Ten experimental parameters were evaluated with a Plackett-Burman design, after which the extraction time and percentage of organic solvent in the aqueous extraction were optimized separately. The two fiber chemistries available (PDMS/DVB and C18) were evaluated in parallel for the entire work. In the final method, slurry samples were made by adding an aqueous solution (6 % methanol v/v) to 2 g of soil. The fiber was conditioned and then inserted, for extraction, into the samples, stirred by a magnetic bar. Afterwards, the analytes were desorbed onto 100 µL of methanol. After the addition of analyte protectants (ethylglycerol, gulonolactone, and sorbitol) the extract was injected into the GC-MS/MS system. Isotopically labelled penconazole was used as internal standard. A calibration was performed by extracting spiked soil with analyte concentrations of 0.1-50 µg/kg. Coefficients of determination of the linear calibration were between 0.94-0.98 for the PDMS/DVB and 0.92-0.99 for the C18. Limits of detection range between 0.01-10 µg/kg for the PDMS/DVB and 0.1-10 µg/kg for the C18. Overall, the C18 analytically outperformed the PDMS/DVB but required a longer extraction time (120 min vs 75 min for the PDMS/DVB). This method allows automation and generates low residual toxic waste, having the potential to be introduced as a greener and simpler alternative to currently used sample preparation methodologies.

Fingerprinting of emerging contaminants in L'Albufera natural park (Valencia, Spain): Implications for wetland ecosystem health

Wetlands are crucial ecosystems that are increasingly threatened by anthropogenic activities. L'Albufera Natural Park, the second-largest coastal wetland in Spain, faces significant pressures from surrounding agricultural lands, industrial activities, human settlements, and associated infrastructures, including treated wastewater inputs. This study aimed at (i) establishing pathways of emerging pollutants entering the natural wetland using both target and non-target screening (NTS) for management purposes, (ii) distinguishing specific contamination hotspots through Geographic Information System (GIS) and (iii) performing basic ecological risk assessment to evaluate ecosystem health. Two sampling campaigns were conducted in the spring and summer of 2019, coinciding with the start and end of the rice cultivation season, the region's primary agricultural activity. Each campaign involved the collection of 51 samples. High-resolution mass spectrometry (HRMS) was employed, using a simultaneous NTS approach with optimized gradients for pesticides and moderately polar compounds, along with complementary NTS methods for polar compounds, to identify additional contaminants of emerging concern (CECs). Quantitative analysis revealed that fungicides comprised a substantial portion of detected CECs, constituting approximately 50% of the total quantified pesticides. Tebuconazole emerged as the predominant fungicide, with the highest mean concentration (>16.9 μg L-1), followed by azoxystrobin and tricyclazole. NTS tentatively identified 16 pesticides, 43 pharmaceuticals and personal care products (PPCPs), 24 industrial compounds, and 12 other CECs with high confidence levels. Spatial distribution analysis demonstrated significant contamination predominantly in the southwestern region of the park, gradually diminishing towards the north-eastern outlet. The composition of contaminants varied between water and sediment samples, with pharmaceuticals predominating in water and industrial compounds in sediments. Risk assessment, evaluated through risk quotient calculations based on parent compound concentrations, revealed a decreasing trend towards the outlet, suggesting wetland degradation capacity. However, significant risk levels persist throughout much of the Natural Park, highlighting the urgent need for mitigation measures to safeguard the integrity of this vital ecosystem.

Assessing the environmental pesticides impact of river sediments from a basin in western Mexico: Spatiotemporal distribution, risk assessment of aquatic invertebrates and pesticides prioritization

The intensive use of pesticides in Mexican agriculture has contributed significantly to the increase in food production, but at the same time represents potential risk to biota. This situation creates a dilemma between the need to increase food production and the preservation of the environment and human health. Aquatic invertebrates play a vital role in the balance of aquatic ecosystems but are sensitive to pesticides contamination. The sensitivity of aquatic invertebrates to pesticides contamination has led them to be used to assess the potential impact of this contamination on aquatic ecosystems. In the present study, conducted in the Ayuquila-Armería basin, the following aims were achieved: 1) quantifying the presence of 20 pesticides in river sediments, 2) assessing the spatiotemporal distribution of pesticides in river sediments, 3) determining the potential risk to aquatic invertebrates, and 4) prioritizing pesticides based on their potential risk. Twelve pesticides were consistently quantified in 192 river sediments samples. The pesticides with the highest concentrations were ametrine, malathion and picloram. The temporal analysis showed seasonality in pesticide concentrations, with higher detection frequencies during the wet season. The risk assessment showed that aquatic invertebrates may be affected by the concentrations of carbofuran, malathion, diazinon and ametrine. Pesticides prioritization identified ametrine, carbofuran, and diazinon as major concerns based on the methodology that considers the Frequency and Extent of Exceedance. This study provides valuable insights into the current pesticides scenario in the Ayuquila-Armería River sediments. The findings underscore the need for sustainable alternatives to mitigate the ecological risks associated with pesticides contamination in this aquatic ecosystem.

Contaminants of emerging concern in water and sediment of the Venice Lagoon, Italy

This study investigates for the first time the contamination of water and sediment of the Venice Lagoon by twenty Contaminants of Emerging Concern (CECs): three hormones, six pharmaceutical compounds (diclofenac and five antibiotics, three of which are macrolides), nine pesticides (methiocarb, oxadiazon, metaflumizone, triallate, and five neonicotinoids), one antioxidant (BHT), and one UV filter (EHMC). Water and sediment samples were collected in seven sites in four seasons, with the aim of investigating the occurrence, distribution, and possible emission sources of the selected CECs in the studied transitional environment. The most frequently detected contaminants in water were neonicotinoid insecticides (with a frequency of quantification of single contaminants ranging from 73% to 92%), and EHMC (detected in the 77% of samples), followed by BHT (42%), diclofenac (39%), and clarithromycin (35%). In sediment the highest quantification frequencies were those of BHT (54%), estrogens (ranging from 35% to 65%), and azithromycin (46%). Although this baseline study does not highlight seasonal or spatial trends, results suggested that two of the major emission sources of CECs in the Venice Lagoon could be tributary rivers from its drainage basin and treated wastewater, due to the limited removal rates of some CECs in WWTPs. These preliminary results call for further investigations to better map priority emission sources and improve the understanding of CECs environmental behavior, with the final aim of drawing up a site-specific Watch List of CECs for the Venice Lagoon and support the design of more comprehensive monitoring plans in the future.

Antifungal drugs in the aquatic environment: A review on sources, occurrence, toxicity, health effects, removal strategies and future challenges

Fungal infections pose a significant global health burden, resulting in millions of severe cases and deaths annually. The escalating demand for effective antifungal treatments has led to a rise in the wholesale distribution of antifungal drugs, which consequently has led to their release into the environment, posing a threat to ecosystems and human health. This article aims to provide a comprehensive review of the presence and distribution of antifungal drugs in the environment, evaluate their potential ecological and health risks, and assess current methods for their removal. Reviewed studies from 2010 to 2023 period have revealed the widespread occurrence of 19 various antifungals in natural waters and other matrices at alarmingly high concentrations. Due to the inefficiency of conventional water treatment in removing these compounds, advanced oxidation processes, membrane filtration, and adsorption techniques have been developed as promising decontamination methods.In conclusion, this review emphasizes the urgent need for a comprehensive understanding of the presence, fate, and removal of antifungal drugs in the environment. By addressing the current knowledge gaps and exploring future prospects, this study contributes to the development of strategies for mitigating the environmental impact of antifungal drugs and protecting ecosystems and human health.

Optimizing the QuEChERS method for efficient monitoring of fipronil, thiobencarb, and cartap residues in paddy soils with varying properties

This study aims to optimize the QuEChERS methodology for extracting three pesticides (fipronil, thiobencarb, and cartap) from two paddy soils with distinct characteristics. Various modifications were explored to enhance extraction efficiency, employing acetonitrile (MeCN) or ethyl acetate (EtOAc) for extraction and primary-secondary amine (PSA) and graphitized carbon black (GCB) for the clean-up. Assessment criteria included accuracy, precision, linearity, detection limits, uncertainty, and matrix effects. Results revealed that the clayey soil with lower organic carbon (OC) content (1.26%) and 100% moisture yielded the highest pesticide recoveries (113.72%, 115.73%, and 116.41% for FIP, THIO, and CART, respectively). In contrast, the silty clayey soil with higher OC content (2.91%) and 20% water content exhibited poor recoveries (< 60%). FIP and CART demonstrated better recoveries with MeCN, while THIO performed better with EtOAc under specific moisture conditions. Clean-up sorbents significantly reduced FIP and CART recoveries, with THIO recoveries less affected. Acidifying with HCl substantially improved CART recovery. EtOAc introduced a moderate to strong matrix effect for FIP and THIO, while MeCN in soils with 100% moisture resulted in a strong matrix effect for CART. The study highlighted the substantial impact of extraction conditions, pesticide properties, and soil conditions on the outcomes of the QuEChERS method. A comprehensive understanding of these interplays was deemed crucial for accurately quantifying pesticide residues in agricultural soils.

Assessing emerging and priority micropollutants in sewage sludge: environmental insights and analytical approaches

The application of sewage sludge (SS) in agriculture, as an alternative to manufactured fertilizers, is current practice worldwide. However, as wastewater is collected from households, industries, and hospitals, the resulting sludge could contaminate land with creeping levels of pharmaceuticals, pesticides, heavy metals, polycyclic aromatic hydrocarbons, and microplastics, among others. Thus, the sustainable management of SS requires the development of selective methods for the identification and quantification of pollutants, preventing ecological and/or health risks. This study presents a thorough evaluation of emerging and priority micropollutants in SS, through the lens of environmental insights, by developing and implementing an integrated analytical approach. A quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction method, coupled with gas chromatography and liquid chromatography, was optimized for the determination of 42 organic compounds. These include organophosphorus pesticides, organochlorine pesticides, pyrethroid pesticides, organophosphate ester flame retardants, polybrominated diphenyl ethers, polychlorinated biphenyls, and polycyclic aromatic hydrocarbons. The optimization of the dispersive-solid phase for clean-up, combined with the optimization of chromatographic parameters, ensured improved sensitivity. Method validation included assessments for recovery, reproducibility, limit of detection (LOD), and limit of quantification (LOQ). Recoveries ranged from 59.5 to 117%, while LODs ranged from 0.00700 to 0.271 µg g-1. Application of the method to seven SS samples from Portuguese wastewater treatment plants revealed the presence of sixteen compounds, including persistent organic pollutants. The quantification of α-endosulfan, an organochlorine pesticide, was consistently observed in all samples, with concentrations ranging from 0.110 to 0.571 µg g-1. Furthermore, the study encompasses the analysis of agronomic parameters, as well as the mineral and metal content in SS samples. The study demonstrates that the levels of heavy metals comply with legal limits. By conducting a comprehensive investigation into the presence of micropollutants in SS, this study contributes to a deeper understanding of the environmental and sustainable implications associated with SS management.

Development of an enhanced analytical method utilizing pepper matrix as an analyte protectant for sensitive GC‒MS/MS detection of dimethipin in animal-based food products

Herein, an analytical method using gas chromatography-tandem mass spectrometry (GC‒MS/MS) was devised to detect the presence of the troublesome pesticide dimethipin in various animal-based food products, including chicken, pork, beef, eggs, and milk. The injection port was primed with a matrix derived from pepper leaves that acts as an analyte protectant (AP) to safeguard the target compound from thermal degradation during gas chromatography. The presence of AP resulted in a remarkable limit of quantification of 0.005 mg/kg for dimethipin in five matrices. Three different versions (original, EN, and AOAC) of the QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) method were compared for dimethipin extraction, with a double-layer solid-phase extraction (SPE) cartridge utilized for matrix purification. A seven-point external calibration curve was established for dimethipin in the five matrices, demonstrating excellent linearity with determination coefficients (R2) ≥ 0.998. The developed quantitative method was validated by fortifying each matrix with three different concentrations of standard dimethipin, and the average recovery fell within the acceptable range outlined in the CODEX guidelines (ranging from 88.8% to 110.0%), with a relative standard deviation (RSD) of ≤ 11.97%. This method effectively addresses the challenge of analyzing dimethipin and can therefore be used as a routine monitoring tool for dimethipin across various matrices.

Airborne Pesticides-Deep Diving into Sampling and Analysis

The escalating utilization of pesticides has led to pronounced environmental contamination, posing a significant threat to agroecosystems. The extensive and persistent global application of these chemicals has been linked to a spectrum of acute and chronic human health concerns. This review paper focuses on the concentrations of airborne pesticides in both indoor and outdoor environments. The collection of diverse pesticide compounds from the atmosphere is examined, with a particular emphasis on active and passive air sampling techniques. Furthermore, a critical evaluation is conducted on the methodologies employed for the extraction and subsequent quantification of airborne pesticides. This analysis takes into consideration the complexities involved in ensuring accurate measurements, highlighting the advancements and limitations of current practices. By synthesizing these aspects, this review aims to foster a more comprehensive and informed comprehension of the intricate dynamics related to the presence and measurement of airborne pesticides. This, in turn, is poised to significantly contribute to the refinement of environmental monitoring strategies and the augmentation of precise risk assessments.

A multi-residue method for trace analysis of pesticides in soils with special emphasis on rigorous quality control

A multi-residue trace analytical method is presented to accurately quantify 146 currently used pesticides in (agricultural) soils with varying soil properties. Pesticides were extracted using an optimized quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach and chemical analysis was carried out by liquid chromatography coupled to tandem mass spectrometry (triple quadrupole). Quantification was based on matrix-matched internal standards calibration, using 95 isotopically labeled analyte analogues. In contrast to the common approach of method validation using soils freshly spiked with analytes shortly before the extraction, our method is additionally validated via an in-house prepared partly aged soil, which contains all target pesticides and via agricultural field soils with native pesticide residues. The developed method is highly sensitive (median method limit of quantification: 0.2 ng/g), precise (e.g., median intra-day and inter-day method precision both ~ 4% based on field soils), and true ((i) quantified pesticide concentrations of the partly aged soil remained stable during 6 months, were close to the initially spiked nominal concentration of 10 ng/g, and thus can be used to review trueness in the future; (ii) median freshly spiked relative recovery: 103%; and (iii) participation in a ring trial: median z-scores close to one (good to satisfactory result)). Its application to selected Swiss (agricultural) soils revealed the presence of in total 77 different pesticides with sum concentrations up to 500 ng/g. The method is now in use for routine soil monitoring as part of the Swiss Action Plan for Risk Reduction and Sustainable Use of Plant Protection Products.

Insight into the environmental fate, hazard, detection, and sustainable degradation technologies of chlorpyrifos-an organophosphorus pesticide

Pesticides play a critical role in terms of agricultural output nowadays. On top of that, pesticides provide economic support to our farmers. However, the usage of pesticides has created a public health issue and environmental hazard. Chlorpyrifos (CPY), an organophosphate pesticide, is extensively applied as an insecticide, acaricide, and termiticide against pests in various applications. Environmental pollution has occurred because of the widespread usage of CPY, harming several ecosystems, including soil, sediment, water, air, and biogeochemical cycles. While residual levels in soil, water, vegetables, foodstuffs, and human fluids have been discovered, CPY has also been found in the sediment, soil, and water. The irrefutable pieces of evidence indicate that CPY exposure inhibits the choline esterase enzyme, which impairs the ability of the body to use choline. As a result, neurological, immunological, and psychological consequences are seen in people and the natural environment. Several research studies have been conducted worldwide to identify and develop CPY remediation approaches and its derivatives from the environment. Currently, many detoxification methods are available for pesticides, such as CPY. However, recent research has shown that the breakdown of CPY using bacteria is the most proficient, cost-effective, and sustainable. This current article aims to outline relevant research events, summarize the possible breakdown of CPY into various compounds, and discuss analytical summaries of current research findings on bacterial degradation of CPY and the potential degradation mechanism.

Baicalin suppressed necroptosis and inflammation against chlorpyrifos toxicity; involving in ER stress and oxidative stress in carp gills

Chlorpyrifos (CPF) has caused large-scale pollution worldwide and posed a threat to non-target organisms. Baicalein (BAI) is a flavonoid extract with anti-oxidant and anti-inflammatory activities. The gills are the mucosal immune organ and the first physical barrier of fish. However, it is not clear whether BAI counteracts organophosphorus pesticide CPF exposure-caused gill damage. Therefore, we established the CPF exposure and BAI intervention models by adding 23.2 μg/L CPF in water and/or 0.15 g/kg BAI in feed for 30 days. The results showed that CPF exposure could cause gill histopathology lesions. Moreover, CPF exposure led to endoplasmic reticulum (ER) stress, caused oxidative stress and Nrf2 pathway activation, and triggered NF-κB-mediated inflammation reaction and necroptosis in carp gills. BAI adding effectively relieved the pathological changes, and lighten inflammation and necroptosis involving in the elF2α/ATF4 and ATF6 pathways through binding to GRP78 protein. Moreover, BAI could ease oxidative stress, but did not affect Nrf2 pathway in carp gills under CPF exposure. These results suggested that BAI feeding could alleviate necroptosis and inflammation against chlorpyrifos toxicity through elF2α/ATF4 and ATF6 axis. The results partially explained the poisoning effect of CPF, and showed BAI could be act as an antidote for organophosphorus pesticides.

Multiresidue extraction of current-use pesticides from complex solid matrices using energized dispersive guided extraction with analysis by gas and liquid chromatography tandem mass spectroscopy

The development of sample processing techniques that recover a broad suite of pesticides from solid matrices, while mitigating coextracted matrix interferences, and reducing processing time is beneficial for high throughput analyses. The objective of this study was to evaluate the effectiveness of an automated extraction system for pesticide analyses in solid environmental samples. An Energized Dispersive Guided Extraction (EDGE) system was used to evaluate two different extraction solvents in optimizing the extraction of 210 pesticides and pesticide transformation products. A graphitized carbon cleanup step was implemented, and three elution solvents were evaluated separately for analyte recoveries. Recoveries between 70 and 130% were achieved for 167 compounds in a test soil using acetonitrile as an extraction solvent and carbon cleanup with acetonitrile and dichloromethane elutions. Nine field samples (soil, sediment, and biosolids) were extracted using the newly developed method and were compared with a previously validated pressurized liquid extraction (PLE) method using an Accelerated Solvent Extraction (ASE) system. Concentrations obtained from the two methods were comparable (linear R² > 0.999), suggesting similar performance between the EDGE and PLE extractions in complex matrices. The new method provided slightly better sensitivities in comparison to the PLE method, ranging from 0.09 to 2.56 ng g^-1. The method presented here significantly reduces extraction setup and runtimes while also minimizing the volume of carcinogenic solvents (e.g., dichloromethane) used in the laboratory and presents a sensitive multiresidue method for a wide range of pesticides in solid matrices.

Validation and Simultaneous Monitoring of 311 Pesticide Residues in Loamy Sand Agricultural Soils by LC-MS/MS and GC-MS/MS, Combined with QuEChERS-Based Extraction

Soil can be contaminated by pesticide residues through agricultural practices, by direct application or through spray-drift in cultivations. The dissipation of those chemicals in the soil may pose risks to the environment and human health. A simple and sensitive multi-residue analytical method was optimized and validated for the simultaneous determination of 311 active substances of pesticides in agricultural soils. The method involves sample preparation with QuEChERS-based extraction, and determination of the analytes with a combination of GC-MS/MS and LC-MS/MS techniques. Calibration plots were linear for both detectors over the range of five concentration levels, using matrix-matched calibration standards. The obtained recoveries from fortified-soil samples ranged from 70 to 119% and from 72.6 to 119% for GC-MS/MS and LC-MS/MS, respectively, while precision values were <20% in all cases. As regards the matrix effect (ME), signal suppression was observed in the liquid chromatography (LC)-amenable compounds, which was further estimated to be negligible. The gas chromatography (GC)-amenable compounds showed enhancement in the chromatographic response estimated as medium or strong ME. The calibrated limit of quantification (LOQ) value was 0.01 μg g^-1 dry weight for most of the analytes, while the corresponding calculated limit of determination (LOD) value was 0.003 μg g^-1 d.w. The proposed method was subsequently applied to agricultural soils from Greece, and positive determinations were obtained, among which were non-authorized compounds. The results indicate that the developed multi-residue method is fit for the purpose of analyzing low levels of pesticides in soil, according to EU requirements.

Pesticide Residues in French Soils: Occurrence, Risks, and Persistence

Contamination of the environment by pesticide residues is a growing concern given their widespread presence in the environment and their effects on ecosystems. Only a few studies have addressed the occurrence of pesticides in soils, and their results highlighted the need for further research on the persistence and risks induced by those substances. We monitored 111 pesticide residues (48 fungicides, 36 herbicides, 25 insecticides and/or acaricides, and two safeners) in 47 soils sampled across France under various land uses (arable lands, vineyards, orchards, forests, grasslands, and brownfields). Pesticides were found in 98% of the sites (46 of the 47 sampled), including untreated areas such as organic fields, forests, grasslands, and brownfields, with up to 33 different substances detected in one sample, mostly fungicides and herbicides. The concentrations of herbicides were the highest in soils with glyphosate, and its transformation product, AMPA, contributed 70% of the cumulative herbicides. Risk assessment underlined a moderate to high risk for earthworms in arable soils mostly attributed to insecticides and/or acaricides. Finally, the comparison with pesticide application by farmers underlines the presence of some residues long after their supposed 90% degradation and at concentrations higher than predicted environmental concentrations, leading to questions their real persistence in soils.

Chlorpyrifos-induced dysregulation of synaptic plasticity in rat hippocampal neurons

Chlorpyrifos (CPF) is a widely used organophosphorus pesticide. Increasing evidence has shown that exposure to CPF in early life might induce neurodevelopmental disorders, but the pathogenesis remains uncertain. Synaptic plasticity plays a crucial role in neurodevelopment. This study aimed to investigate the effect of CPF on synaptic plasticity in hippocampal neurons and establish the cellular mechanism underlying these effects. Using CPF-exposed rat and primary hippocampal neurons model, we analyzed the impact of CPF on the synaptic morphology, the expression level of a presynaptic protein, a postsynaptic protein and ionotropic glutamate receptors (iGluRs), as well as the effects on the Wnt/β-catenin pathway. We found that the synapses were shortened, the spines were decreased, and the expression of synaptophysin (Syp), postsynaptic density-95 (PSD-95), GluN1, GluA1 and Wnt7a, as well as active β-catenin in primary hippocampal neurons was decreased. Our study suggests that CPF exposure induced dysregulation of synaptic plasticity in rat hippocampal neurons, which might provide novel information regarding the mechanism of CPF-induced neurodevelopmental disorders.

Gut microbiota: a non-target victim of pesticide-induced toxicity

The human gut microbiota can be potentially disrupted due to exposure of various environmental contaminants, including pesticides. These contaminants enter into non-target species in multiple ways and cause potential health risks. The gut microbiota-derived metabolites have a significant role in maintaining the host's health by regulating metabolic homeostasis. An imbalance in this homeostasis can result in the development of various diseases and their pathogenesis. Pesticides have hazardous effects on the host's gut microbiota, which is evident in a few recent studies. Therefore, there is an urgent need to explore the effect of pesticide on gut microbiota-mediated metabolic changes in the host, which may provide a better understanding of pesticide-induced toxicity. The present review summarizes the pesticide-induced effects on gut microbiota, which in turn, induces changes in the release of their secondary metabolites that could lead to various host health effects.

Simultaneous multi-residue pesticide analysis in southern Brazilian soil based on chemometric tools and QuEChERS-LC-DAD/FLD method

A simple and straightforward QuEChERS extraction method was proposed for the simultaneous determination of atrazine (ATZ), desethylatrazine (DEA), desisopropylatrazine (DIA), carbaryl (CBL), carbendazim (CBD), and diuron (DIU) in soil with high agricultural activity from southeastern Brazil, using high-performance liquid chromatography-diode-array detection/fluorescence detection. Screening studies carried out by 2⁴ factorial design indicate better recoveries when less sample (1.0 g) and the volume of solvent (2.0 mL of ACN) were applied, compared to the original QuEChERS method. Furthermore, interactions between factors were not negligible in the experimental set, except for ATZ and DIU, in which only water volume influenced their recovery. The influence of the type (primary secondary amine (PSA), C18, and Florisil) and the sorbent amount ratio to the compounds' concentration were also considered. PSA (25 mg) was selected as the best sorbent without losing analytical response. The limits of quantification (LOQ) were estimated to be 5.0 to 15 µg kg^-1 in the soil matrix. Analytical performances were consistent with linearity (R² ≥ 0.998), recovery from 74.7 to 108%, and relative standard deviations (RSD) between 2.6 and 20.2%. Robustness was assessed by fractional factorial Plackett-Burman design. The method is recommended for chemicals that are soluble in water, and it was successfully applied in the analysis of real soil samples containing the analytes in the range of μg kg^-1, proving to be suitable for the study of soils strongly impacted by agricultural activity.

Suspected-screening assessment of the occurrence of organic compounds in sewage sludge

The profiling of emerging organic pollutants present in sludge and generated during wastewater treatment is much more limited than in water. This is mainly due to the difficulty of sludge analysis because of its high content of organic matter and interfering compounds. In this study, a generic extraction method using a mixture of buffered water (pH 4.1) and solid phase extraction (SPE) clean-up was applied to samples of sludge obtained in different treatment plants. This extraction was followed by determination of the contaminants by ultra-high performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC-HRMS), using suspected screening to detect the most relevant organic compounds that access the environment through sludge application. This screening (including >3000 substances, such as, pharmaceuticals, pesticides, metabolites and industrial chemicals) tentatively identified 122 compound and assigned most probable structure to 39. The set of compounds assigned to a probable structure was increased in 14 compounds by searching in a free database of metabolites. Fifteen compounds were unequivocally confirmed against the analytical standard. Pharmaceuticals and personal care products (PPCPs), with 31 substances identified and 8 confirmed were the main group of compounds. Compounds frequently detected in all sludge samples include nucleotides such as adenosine triphosphate, amino acids such as phenylalanine, or peptides such as leu-phe. Altogether, the results of this work highlight the interest of HRMS to draw the profile of organic compounds in complex matrices.

Assessment of the occurrence of 455 pharmaceutical compounds in sludge according to their physical and chemical properties: A review

Sludge agronomical reuse is of major interest due to the beneficial contribution of nutrients. However, it implies the introduction of unregulated pharmaceuticals into amended-soils and creates a controversial issue about sludge management. To limit their dissemination, it is essential to identify the compounds of interest and understand their attenuation mechanisms through the sludge processes. This paper summarizes the knowledge on 455 investigated pharmaceuticals among 32 therapeutical categories in amendable sludge matrices. It contributes to enlarging the list of commonly quantified compounds to 305 residues including 84 additional compounds compared to previous reviews. It highlights that sorption appears as the main mechanism controlling the occurrence of pharmaceuticals in sludge matrices and shows the considerable residual levels of pharmaceuticals reaching several mg/kg in dry weight. Antibiotics, stimulants, and antidepressants show the highest concentrations up to 232 mg/kg, while diuretics, anti-anxieties or anticoagulants present the lowest concentrations reaching up to 686 µg/kg. Collected data show the increase in investigated compounds as antifungals or antihistamines, and underline emerging categories like antidiabetics, antivirals, or antiarrhythmics. The in-depth analysis of the substantial database guides onto the pharmaceuticals that are the most likely to occur in these amendable matrices to assist future research.

A worldwide review of currently used pesticides' monitoring in agricultural soils

The adverse effects of pesticides on the agricultural ecosystem have been matter of concern in recent decades. However, attention has mostly been directed to highly persistent chemicals leading to underestimating currently used pesticides. In this review we present an overview of the studies on monitoring currently used pesticides in agricultural soils around the world published in the last 50 years. Furthermore, all data available in the articles has been integrated into one united data set. Finally, an overall meta-analysis on the prepared data set was performed. The result of the meta-analysis has been presented in this article. It was revealed that the occurrence of currently used pesticides in the soil of agricultural regions was alarming in many countries, establishing the need for long-term monitoring programs, especially in regions with intensive agricultural activities, in order to determine real-world currently used pesticides fate and accumulation in the soil.

Ultrasound-assisted QuEChERS-based extraction using EDTA for determination of currently-used pesticides at trace levels in soil

It is essential to monitor pesticides in soils as their presence at trace levels and their bioavailability can induce adverse effects on soil's ecosystems, animals, and human health. In this study, we developed an analytical method for the quantification of traces of multi-class pesticides in soil using liquid chromatography-tandem mass spectrometry. In this way, 31 pesticides were selected, including 12 herbicides, 9 insecticides, and 10 fungicides. Two extraction techniques were first evaluated, namely, the pressurized liquid extraction and the QuEChERS procedure. The latest one was finally selected and optimized, allowing extraction recoveries of 55 to 118%. The role of the chelating agent EDTA, which binds preferentially to soil cations that complex some pesticides, was highlighted. Coupled with liquid chromatography-tandem mass spectrometry, the procedure displayed very high sensitivity, with limits of quantification (LOQ) in the range 0.01-5.5 ng/g. A good linearity (R2 > 0.992) was observed over two orders of magnitude (LOQ-100 [Formula: see text] LOQ) with good accuracy (80-120%) for all compounds except the two pyrethroids lambda-cyhalothrin and tau-fluvalinate (accuracy comprised between 50 and 175%) and the cyclohexanedione cycloxydim (accuracy < 35%). Good repeatability and reproducibility were also achieved. The method was finally successfully applied to 12 soil samples collected from 3 land-use types. Among the 31-targeted pesticides, 24 were detected at least once, with concentration levels varying from LOQ to 722 ng/g. Many values were below 0.5 ng/g, indicating that the developed method could provide new knowledge on the extremely low residual contents of some pesticides.

Analytical Evaluation of Carbamate and Organophosphate Pesticides in Human and Environmental Matrices: A Review

Pesticides are synthetic compounds that may become environmental contaminants through their use and application. The high productivity achieved in the agricultural industry can be credited to the use and application of pesticides by way of pest and insect control. As much as pesticides have a positive impact on the agricultural industry, some disadvantages come with their application in the environment because they are intentionally toxic, and this is more towards non-target organisms. They are grouped into chlorophenols, organochlorines, synthetic pyrethroid, carbamates, and organophosphorus based on their structure. The symptoms of exposure to carbamate (CM) and organophosphates (OP) are similar, although poisoning from CM is of a shorter duration. The analytical evaluation of carbamate and organophosphate pesticides in human and environmental matrices are reviewed using suitable extraction and analytical methods.

Sub-lethal effects of soil multiple contamination on the avoidance behaviour of Eisenia fetida

Natural ecosystems are frequently exposed to complex mixtures of different chemicals. However, the environmental risk assessment is mainly based on data from individual substances. In this study, the individual and combined effects on the terrestrial earthworm E. fetida exposed to the anionic surfactant sodium lauryl ether sulphate (SLES) and the pesticides chlorpyrifos (CPF) and imidacloprid (IMI) were investigated, by using the avoidance behaviour as endpoint. Earthworms were exposed to a soil artificially contaminated with five sub-lethal concentrations of each contaminant, both as single substances and in combination of binary and ternary mixtures. Overall results showed that IMI provoked the highest avoidance effect on earthworms, with a concentration value that induced an avoidance rate of 50% of treated organisms (AC50) of 1.30 mg/kg, followed by CPF (AC50 75.26 mg/kg) and SLES (AC50 139.67 mg/kg). The application of the Combination Index (CI) method, indicated that a deviation from the additive response occurred for most of the tested chemical mixtures, leading to synergistic or antagonistic avoidance responses. Synergistic effects were produced by the exposure to the two lowest concentrations of the CPF+IMI mixture, and by the highest concentrations of SLES+CPF and SLES+CPF+IMI mixtures. On the contrary, antagonistic effects were observed at the lowest concentrations of the binary mixtures containing the SLES and at almost all the tested concentrations of the SLES+CPF+IMI mixture (with the exception of the highest tested concentration). These results show that the avoidance test is suitable to assess the detrimental effects exerted on earthworms by chemical mixtures in soil ecosystems and the use of behavioural endpoints can increase the ecological significance of environmental risk assessment procedures.

Simultaneous determination of pesticides from soils: a comparison between QuEChERS extraction and Dutch mini-Luke extraction methods

The expanding nature of the agricultural sector has fuelled the intensification of plant protection products usage, including pesticides. These pesticides may persist in soils, necessitating their accurate determination in a variety of soil types. However, due to their complex nature, the effective extraction of pesticide residues from soil matrices can present challenges to pesticide detection and quantification. This research compared two well-known extraction methods, QuEChERS and Dutch mini-Luke, by assessing their specificity, sensitivity, accuracy, precision and reproducibility in extracting seven distinct pesticides with a range of chemico-physical characteristics from Irish soils. The HPLC-UV conditions were optimised to separate the seven pesticides, and it was shown that both extraction methods successfully extracted neonicotinoids with recovery values ranging between 85 and 115%. Fluroxypyr and prothioconazole could not be efficiently extracted using QuEChERS, however, the recovery values of both the analytes ranged between 59 and 117% using Dutch mini-Luke. Furthermore, with the exception of prothioconazole using Dutch mini-Luke, both extraction methods resulted in reproducibility and precision values below or equal to 20%. Lastly, Dutch mini-Luke is noted to have a lower matrix effect than QuEChERS, except for prothioconazole. The comparison results showed that Dutch mini-Luke resulted in superior method sensitivity, better recovery, and lower matrix effect towards most investigated analytes and was the only extraction technique that successfully extracted all pesticides analysed in soil matrices.

Targeted Multiresidue Method for the Analysis of Different Classes of Pesticides in Agro-Food Industrial Sludge by Liquid Chromatography Tandem Mass Spectrometry

Sludge generated after washing of fruits and vegetables during agro-food processes is a complex matrix and selective methods for the identification and quantification of pesticides’ residues are necessary in order to achieve a sustainable and effective management of the total sewage. The present work describes the development and validation of a reliable, simple and fast analytical method based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the determination of 47 pesticides of different chemical classes, including organosphosphates, pyrethroids, neonicotinoids, triazoles and others, in sludge samples after QuEChERS sample preparation. The necessity of the individual steps of QuEChERS was investigated and the LC-ESI-MS/MS conditions were optimized to achieve maximum sensitivity of the target analytes. The method limits of detection (LODs) ranged between 0.0005 mg/kg (imidacloprid) and 0.05 mg/kg (beta cyfluthrin). The recoveries ranged between 71–120% and the repeatability of the method was ≤25% expressed as relative standard deviation. The method was applied to sludge samples generated after washing of fruits in an agro-fruit-packaging unit in Greece. The results showed the presence of 37 pesticides’ active substances with concentrations ranging from low ppbs, such as fludioxinil (5 μg/kg) up to low ppms such as beta cyfluthrin (3.5 mg/kg) and with their sum concentration reaching up to 19 mg/kg.

Development and validation of sensitive methods for simultaneous determination of 9 antiviral drugs in different various environmental matrices by UPLC-MS/MS

Trace antiviral drug contamination in aquatic ecosystems is becoming a significant environmental concern that requires an urgent efficient determination method. Here we developed sensitive and robust multi-residue determination methods to simultaneously extract and analyze 9 commonly used antiviral drugs (abacavir, zidovudine, efavirenz, nevirapine, ritonavir, lopinavir, lamivudine, telbivudine and entecavir) in surface water, wastewater, sediment, and sludge. Water samples were extracted with solid-phase extraction (SPE) technique using tandem hydrophilic-lipophilic balance and graphitized carbon black cartridges, while sediment and sludge samples were extracted using QuEChERS (quick, easy, cheap, effective, rugged, and safe) method. The extraction conditions of SPE (pH and cartridge type) and QuEChERS (acetic acid content, salts reagent, and purification sorbent) methods were carefully optimized. We observed that under optimum conditions, the method quantification limits of the 9 antiviral drugs in water and solid samples ranged from 0.05 to 19.23 ng L^-1 and from 0.02 to 7.38 ng g^-1, respectively. For environmental samples spiking 3 different concentrations, the recovery values for the most targeted antiviral drugs ranged from 70 to 130%, except for efavirenz. All targeted antiviral drugs were detected in wastewater samples except for entecavir. We also found abacavir, efavirenz, ritonavir, lopinavir, and telbivudine in sediment and sludge samples. Notably, telbivudine was identified in all environmental matrices, with a high concentration of 127 ng L^-1 and 222 ng g^-1 in water and sediment samples, respectively.

Validation of an Analytical Workflow for the Analysis of Pesticide and Emerging Organic Contaminant Residues in Paddy Soil and Rice

Contamination of agricultural soil with organic contaminants is a global problem due to the risks associated with food security and ecological sustainability. Besides the use of agrochemicals, hundreds of emerging contaminants enter arable lands through polluted irrigation water. In this study, an analytical workflow based on QuEChERS extraction coupled with LC-MS/MS quantification was applied to measure 65 emerging contaminants (42 pesticides and 23 multiclass industrial chemicals) in soil and rice for the first time. The method was validated on paddy and yard soil and rice plants. A recovery efficiency ranging between 70 and 120% (RSD <20%) was achieved for more than 70% of the analytes. Then, the validated method was used to quantify target contaminants in 22 soil and 9 rice samples collected mainly from paddy fields close to the Ergene River (Turkey), which is a highly polluted river used for irrigation in the region. Pesticide residues were present in all soil samples up to 2.4 mg/kg. However, their concentrations were below their maximum residual limits in rice. Azoxystrobin, prochloraz, propiconazole, imidacloprid, and epoxiconazole were the most frequently detected pesticides. In addition, industrial pollutants such as benzyldimethyldodecylammonium and tris(2-butoxyethyl) phosphate were detected in paddy soil samples at concentrations between 0.1 and 691 μg/kg. Benzyldimethyldodecylammonium and 5-methyl-1H benzotriazole were also measured in rice at concentrations up to 0.26 and 2.13 μg/kg, respectively.

Ecotoxicological evaluation of imazalil transformation products on Eisenia Andrei

Data concerning the toxicity of the transformation products of some pesticides considered emerging contaminants are still incipient. This study aimed to evaluate acute (filter paper contact and avoidance test) and chronic (assays carried out in Red yellow Ultisoil) effects of the transformation products of the fungicide imazalil (IMZ) by heterogeneous photocatalysis (TiO₂/UV) in Eisenia andrei. Some endpoints, i.e. biomass variation, disorder in reproduction and avoidance behavior, cytotoxicity (cell density and feasibility), and coelomic fluid (eleocytes and amoebocytes, immune cell) and antioxidant system (catalase (CAT) and glutathione S-transferase (GST)) changes were assessed. The studied degradation times (6, 18, 35 and 90 min) represented 70; 35; 10 and 0% of the initial IMZ concentration (5 mg L^-1). No lethality and no significant difference in biomass variations were noted in the acute contact test. Decreased GST and increased CAT activities, as well as cell typing alterations and decreased cell viability and density detected at the 90-min degradation timepoint (PDT-90) indicate direct cytotoxic IMZ transformation product effects. In the avoidance test, no significant earthworm repulsion or attraction was observed. PDT-90 transformation products were responsible for losses in biomass and a reduction in the number of earthworm cocoons and juveniles present in soil. No cytotoxic effects were observed in the long term, although increased CAT and decreased GST activities were observed. Investigations on the relative toxicity of IMZ transformation products are relevant for future discussions regarding the environmental treatment, control and destination of this compound and its derivatives.

Insights into the microbial degradation and catalytic mechanisms of chlorpyrifos

Chlorpyrifos is extensively used worldwide as an insecticide to control various insect pests. Long-term and irregular applications of chlorpyrifos have resulted in large-scale soil, groundwater, sediment, and air pollution. Numerous studies have shown that chlorpyrifos and its major intermediate metabolite 3,5,6-trichloropyridinol (TCP) accumulate in non-target organisms through biomagnification and have a strong toxic effect on non-target organisms, including human beings. Bioremediation based on microbial metabolism is considered an eco-friendly and efficient strategy to remove chlorpyrifos residues. To date, a variety of bacterial and fungal species have been isolated and characterized for the biodegradation of chlorpyrifos and TCP. The metabolites and degradation pathways of chlorpyrifos have been investigated. In addition, the chlorpyrifos-degrading enzymes and functional genes in microbes have been reported. Hydrolases can catalyze the first step in ester-bond hydrolysis, and this initial regulatory metabolic reaction plays a key role in the degradation of chlorpyrifos. Previous studies have shown that the active site of hydrolase contains serine residues, which can initiate a catalytic reaction by nucleophilic attack on the P-atom of chlorpyrifos. However, few reviews have focused on the microbial degradation and catalytic mechanisms of chlorpyrifos. Therefore, this review discusses the deep understanding of chlorpyrifos degradation mechanisms with microbial strains, metabolic pathways, catalytic mechanisms, and their genetic basis in bioremediation.

Pesticide traces in local crops of Sancti Spíritus, Cuba: risk assessment study

Background

Vegetables and rice produced in Cuba may contain residue of pesticides that exceed the maximum residue limits (MRLs). Pesticide residues on crop samples from Sancti Spíritus province were analyzed. Based on these residue data, a risk assessment of consumer exposure was conducted.

Methods

Samples collected during the 2017, 2018, and 2019 periods were analyzed using UPLC-MS/MS and GC/ECD chromatography techniques. A deterministic risk assessment was performed, using consumption data collected by the authors. Also, a probabilistic risk assessment was worked out with @RISK for the Monte Carlo simulation.

Results

A broad range of pesticides were detected in the samples. Most of the detected active ingredients were insecticides and fungicides. A considerable part of the detected pesticide residues exceeded the EU and Cuban MRLs. However, the deterministic risk assessment revealed that the consumer risk of pesticide exposure is low. Only in the maximum exposure scenario children and adults were exposed to methamidophos residues in tomatoes higher than the acceptable daily intake.

Conclusions

When a more realistic consumption (50th percentile) and higher (95th percentile) consumption pattern for tomatoes was assumed, the deterministic risk assessment found no chronic risk for children and adults being exposed to methamidophos present in the tomato samples. Furthermore, the probabilistic risk assessment concerning methamidophos exposure in tomato for children and adult strata showed no risk. To perform in the future a more accurate risk assessment for Cuban consumers it is important to have more detailed consumption data and an expanded dataset of the residues in different crops.

Optimization and validation of a QuEChERS-based method for the simultaneous environmental monitoring of 218 pesticide residues in clay loam soil

A modified QuEChERS method was optimized, validated and verified for the extraction of 218 pesticide residues in agricultural soil samples. The 218 analytes are extracted using a single step, without clean-up, with matrix-matched calibration, and two complementary techniques: liquid and gas chromatography tandem triple quad mass spectrometry (LC-MS/MS and GC-MS/MS). Some of the parameters such as salts, acidity of the extraction solvent, sample moisture and some mechanical changes in the procedure were optimized to improve the overall performance for the target compounds and the soil matrix. The method was fully validated on a representative agricultural soil sample of the Canary Islands (clay loam soil) in terms of linearity, accuracy and precision. To avoid matrix effects, matrix-matched calibration curves (R² ≥ 0.99) were used for all target analytes. 100% of the compounds can be quantified with limits of quantification (LOQ) lower than the limit typically used in soils (50 ng g^-1), with 92% of compounds presenting a LOQ that is at least 10 times lower than that normally required. The limits of detection (LOD) ranged between 0.024 and 6.25 ng g^-1. The validated method was applied to a series of actual samples of agricultural soil (n = 18). In addition, as a further verification of its potential, the results of the application of the method in the investigation of clay loam soil samples that were obtained from underneath wildlife carcasses in the context of an environmental forensic investigation are also presented.

Distribution of organochlorine, organophosphates, carbamate, thiocarbamate, pyrethroids, and strobilurins in surface sediments of the Rio de Ondas watershed by GC-MS

The determination of some pesticides in surface sediments can provide important information about their distribution in the water column. This work aimed to determine the distribution of the classes of pesticides along the Ondas River's hydrographic basin (ORHB), in eighteen different points, during the dry and rainy periods. The pesticides were extracted from the sediment samples by solid-liquid extraction and then analyzed using a gas chromatograph coupled to mass spectrometry. After the development and validation of the method, nineteen pesticides from the group of organochlorine, organophosphates, carbamate and thiocarbamate, pyrethroids, and strobilurins were quantified in at least one point in the two collection periods, with accuracy varying between 86 and 126%. The average concentrations were 0.020 ng g^-1 (carbofuran) to 249.123 ng g^-1 (dimethoate) and 0.029 ng g^-1 (carbofuran and sulfotep) to 533.522 ng g^-1 in the dry and rainy periods, respectively. The results showed a wide distribution of pesticide residues in the ORHB, with higher levels for dimethoate, phenitrothion, and malathion, which may be related to their agricultural use in the region. In Brazil, it does not have specific legislation for maximum permitted values of pesticides in sediment, allowing for inappropriate or prohibited use and, consequently, affecting water quality.

Multiresidue procedure to assess the occurrence and dissipation of fungicides and insecticides in vineyard soils from Northwest Spain

The presence of fungicide and insecticide residues in wine has been largely investigated. However, few studies have addressed the persistence of these compounds in vineyard soils. In this research, we investigate the residues of a relevant number of fungicides and insecticides in vineyard soils, obtained in the Northwest of Spain, at the beginning of each agriculture campaign. Moreover, the dissipation of species showing high concentrations were monitored during the non-vegetative period of vines, in order to understand their soil evolution between application campaigns. To this end, a multiresidue analytical procedure based on pressurized liquid extraction (PLE) followed by liquid chromatography tandem mass spectrometry (LC-MS/MS) determination was first optimized. Under final working conditions, absolute recoveries in the range from 70 to 130% were achieved for 44 out of 51 selected compounds. The method LOQs remained at the low ng g^-1 level (0.2-13 ng g^-1) with a linear response range up to 500 ng g^-1. Analysis of vineyard soils, collected during a 2-year period, from a geographic area with a high incidence of fungal diseases, demonstrated the presence of relevant concentrations of several fungicides and the insecticide imidacloprid (IMI) in this compartment. Most compounds detected at the end of the application season remained in soil at the beginning of the next year campaign. Among them, six fungicides (dimethomorph, boscalid, myclobutanil, penconazole, pyraclostrobin and pyrimethanil) and IMI showed average dissipation efficiencies below 50%, so they pose a potential to accumulate in this kind of soils.

UV light and temperature induced fluridone degradation in water and sediment and potential transport into aquifer

Fluridone is widely used in ambient water bodies to control the spread of invasive aquatic plants. While the ability of fluridone to control aquatic weeds such as water hyacinth is well reported, an improved understanding of fluridone persistence in water and sediment is still needed to determine potential residues of fluridone in the water column and bed sediment of ambient water bodies. In this study, experiments were conducted over a three-month period to examine the degradation of fluridone in saturated sediment and water under various levels of UV-light (0-1000 μW/cm²), and temperature (4-40 °C). Results showed a large decrease in the half-life of fluridone in water with increasing UV light intensity, but in saturated sediment the impact of UV light exposure on fluridone degradation was minimal. At low temperature (4 °C), the degradation of fluridone in both water and sediment was minimal. At elevated temperature (20-40 °C), fluridone degradation was increased in water and sediment. Additionally, the persistence of fluridone in sediment was reduced by increasing sand content in the sediment matrix. Possible fluridone transport through the subsurface was estimated over a range of initial concentrations, groundwater velocities, fluridone half-lives, and fluridone sorption coefficients which may be seen in a field environment. A form of the Ogata-Banks equation which accounts for 1st order decay was used for describing the dispersion of fluridone, while a related equation from Bear, 1979 was utilized to quantify advection. In all tested scenarios, maximum transport was less than 10 m over one month of observation. Results of this study will improve our existing understanding of fluridone persistence and in water and sediment.

Sub-lethal effects of the pesticide imazalil on the earthworm Eisenia andrei: reproduction, cytotoxicity, and oxidative stress

Although considered an emerging contaminant and detected in the environment, the systematic and penetration fungicide imazalil ((RS)-1-(β-allyloxy-2,4-dichlorophenylethyl) imidazole) has received relatively little scientific attention with regard to its possible negative effects in the environment. Only a few toxicological studies have assessed the potential environmental effect of imazalil and its impact on organisms. In this context, the aim of the present study is to evaluate the effects of different concentrations of the pesticide imazalil on the earthworm Eisenia andrei in acute contact and chronic tests in natural soil. Moreover, several endpoints, such as biomass loss or gain, reproduction, behavior, effects on immune system cells, and oxidative stress were also evaluated. Imazalil toxicity to E. andrei was determined by three approaches: a filter paper contact test (0, 0.16, 1.66, 16.6, 166 μg.cm-2), an avoidance (0, 0.1, 1, and 10 mg.kg-1), and a chronic test for 45 days (0, 0.01, 0.1, 1, and 10 mg.kg-1). All organisms exposed to the filter paper contact and chronic tests were submitted to two endpoint analyses: first, coelomic fluid collection by the extrusion method to determine density, viability, and cell type; second, oxidative stress assessments by determining GST and CAT enzymatic activities. This study allows for the conclusion that imazalil does not cause immediate earthworm death after exposure (LC50 > 166 μg.cm-1). However, due to several complementary factors, this compound may compromise earthworm health and lead to death, as E. andrei individuals did not avoid the contaminated soil, thus contributing to longer exposure periods and consequent cumulative damage to their systems. Decreased immunocompetent cellular viability (p < 0.05) and density (p < 0.05) in the chronic test are noteworthy, leading to susceptibility to exogenous factors, as well as irreversible cellular damage provoked by oxidative stress, such as cellular membrane rupture.

Determination of fipronil and bixafen pesticides residues using gas chromatography mass spectroscopy with matrix matching calibration strategy after binary dispersive liquid-liquid microextraction

The objective of this study was to determine bixafen and fipronil residues in domestic and industrial wastewater, soil and mint samples by binary dispersive liquid-liquid microextraction method (BDLLME) prior to gas chromatography-mass spectrometry (GC-MS). Extraction efficiency for the selected analytes was improved by optimizing the parameters such as solvent type, ratio and volume, dispersive solvent type/volume, mixing type and duration to increase overall analytical performance. Under the optimum chromatographic and extraction conditions, limits of detection values for bixafen and fipronil were determined as 7.3 and 6.1 µg L^-1, respectively. Spiking experiments were performed for domestic and industrial wastewater, soil and mint samples to evaluate applicability and accuracy of the proposed method. Recovery results for the samples were calculated in the range of 89.4%-112.6% via matrix matching calibration strategy. It was determined that the detection power of GC-MS system was improved 7.8 times for bixafen and 119 times for fipronil over LOD comparisons of conventional GC-MS and B-DLLME-GC-MS systems.

Cytogenetic and genotoxic assessment in Allium cepa exposed to imazalil fungicide

Imazalil (IMZ), a fungicide containing imidazole group, is extensively used for the prevention and treatment of fungal diseases in plants. Current study was performed to examine cyto-genotoxic potential of IMZ on Allium cepa roots by following Allium ana-telophase and single cell gel electrophoresis (comet) assays. The concentration which reduced the growth of the root tips of IMZ by 50% compared to the negative control group (EC₅₀) was found to be 1 μg/mL by Allium root growth inhibition test. 0.5, 1, and 2 μg/mL concentrations of IMZ were exposed to Allium roots for intervals of 24, 48, 72, and 96 h. 10 μg/mL of methyl methane sulfonate (MMS) and distilled water were used as control groups, both positive and negative. Statistical analysis was performed by using one-way ANOVA with Duncan's multiple comparison tests at p ≤ 0.05 and Pearson correlation test at p = 0.01. IMZ showed cytotoxic effect by statistically decreasing root growth and mitotic index (MI) and also genotoxic effect by statistically increasing chromosomal aberrations (CAs) and DNA damage compared to the negative control group. With these cyto-genotoxic effects, it should be used carefully and further cyto-genotoxic mechanisms should be investigated along with other toxicity tests.

Environmental risk assessment (ERA) of pyriproxyfen in non-target aquatic organisms

Pyriproxyfen (PPF) is a synthetic substance and an insect juvenile hormone agonist with growth regulating effect. It is used worldwide as a pesticide in agriculture and public health campaigns, including the control of Aedes aegypti proliferation. It has low volatility, high Kow value and high lability in aerobic aquatic systems but is considered persistent in anaerobic systems, with a half-life of 288.9 days. The objective of this study is to survey the environmental contamination by pyriproxyfen in aquatic environmental matrices, to review the acute and chronic toxicity in non-target aquatic organisms and to make a risk assessment for the organisms addressed in the bibliographic survey. Pyriproxyfen quantification studies in aquatic environmental matrices are quite scarce and punctual-not representative of regional and global contamination. The water of the River Júcar (Spain) presented the highest concentration of PPF (99.59 ng L^-1) among the matrices analysed, which is equivalent to 1% of the maximum dose allowed by the World Health Organization for use in drinking water. Acute and chronic aquatic toxicity studies with LC50, EC50, LOEC and NOEC values of PPF were compiled and interpreted to evaluate possible risks to non-target aquatic organisms. Pyriproxyfen caused a high risk at concentrations detected in aquatic environments for Daphnia magna, with probable reproductive effects and occasional survival risk. This species was the most sensitive to the pesticide, with the lowest estimated concentration of 50 % of effect values, followed by a freshwater fish (Xiphophorus maculatus) and estuarine crustaceans (Eurytemora affinis and Leander tenuicornis). The most resistant organisms to PPF within the endpoints addressed in this review were Danio rerio (zebrafish) and Capitella sp. (polychaete). Through the species sensitivity distribution (SSD), it was possible to estimate HC5 at 0.214 μg L^-1 and that 2.3 % of the species present high sensitivity to pyriproxyfen in the environmental concentration detected in river water and 25.82 % of the species are affected in the concentration allowed for lavicidal use. In order to obtain more accurate risk estimates, we suggest ecotoxicological assessments in other species, covering various taxa, with emphasis on microcrustaceans due to their fundamental role in the aquatic food web and taxonomic proximity to pesticide target organisms. Furthermore, additional studies of contamination in aquatic environmental matrices are required, with particular attention to freshwater and estuarine environments due to the proximity to the sources of pyriproxyfen and environmental characteristics suggesting high accumulation. Thus, it will be possible to estimate realistic exposure levels and risks in different environments, contributing to effective and safe decision making, integrating development, public health and environmental policy.

Residues of Persistent Organic Pollutants (POPs) in Agricultural Soils Adjacent to Historical Sources of Their Storage and Distribution-The Case Study of Azerbaijan

The aim of this study was to identify and examine the levels of organochlorine pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) in soil collected from the surroundings of historical pesticide storage facilities on former agricultural aerodromes, warehouses, and pesticide distribution sites located in the most important agricultural regions in Azerbaijan. The conducted research included determination of three groups of POPs (occurring together), in the natural soil environment influenced for many years by abiotic and biotic factors that could have caused their transformations or decomposition. In this study, soil samples were collected in 21 georeferenced points located in the administrative area of Bilasuvar, Saatly, Sabirabad, Salyan and Jalilabad districts of Azerbaijan. Soil chemical analysis involved determination of organochlorine compounds (OCP): hexachlorocyclohexanes (HCHs) (three isomers α-HCH, β-HCH and γ-HCH) and dichlorodiphenyltrichloroethanes (DDTs) (six congeners 2,4'DDT; 4,4'DDT; 2,4'DDE; 4,4'DDE; 2,4'DDE; and 4,4'DDE); polycyclic aromatic hydrocarbons (PAHs): 16 compounds from the United States Environmental Protection Agency US EPA list and, PCBs (seven congeners identified with the following IUPAC numbers: 28, 52, 101, 118, 138, 153, and 180). Our research showed that OCPs reached the highest concentration in the studied areas. The total concentrations of OCPs ranged from 0.01 to 21,888 mg∙kg^-1 with significantly higher concentrations of Σ6DDTs (0.01 μg kg^-1 to 21880 mg kg^-1) compared to ΣHCH (0.14 ng kg^-1 to 166.72 µg kg^-1). The total concentrations of PCBs in the studied soils was varied from 0.02 to 147.30 μg·kg^-1 but only PCB138 and PCB180 were detected in all analyzed samples. The concentrations of Σ16 PAHs were also strongly diversified throughout the sampling areas and ranged from 0.15 to 16,026 mg kg^-1. The obtained results confirmed that the agricultural soils of Azerbaijan contained much lower (up to by three orders of magnitude) concentrations of PCBs and PAHs than DDT. It is supported by the fact that PCBs and PAHs were not directly used by agriculture sector and their content results from secondary sources, such as combustion and various industrial processes. Moreover, the high concentrations of PAHs in studied soils were associated with their location in direct neighborhood of the airport, as well as with accumulation of contaminants from dispersed sources and long range transport. The high concentrations of pesticides confirm that deposition of parent OCPs have occurred from obsolete pesticide landfills.

Simultaneous analysis of multiclass antibiotic residues in complex environmental matrices by liquid chromatography with tandem quadrupole mass spectrometry

A simultaneous extraction and cleanup method was optimized and validated for the determination of 40 antibiotics from cephalosporin, fluoroquinolone, lincosamide, macrolide, nitroimidazole, quinolone, sulfonamide and tetracycline groups in sediments by liquid chromatography with tandem quadrupole mass spectrometry (LC-MS/MS). The method involved hydration of freeze-dried sediment sample (2.0 g) with 2.5 ml of 0.1 M Na-EDTA McIlvaine buffer and extraction with 5 ml of MeOH and MeCN (1:3 v/v) followed by dispersive solid phase extraction by using 100 mg mix of C18 and PSA (1:2 w/w) and 50 mg MgSO₄ prior to LC-MS/MS analysis. The method was validated for 10, 20, 50 and 100 µg/kg spiking levels by using blank sediment sample obtained from a drinking water reservoir according to the guidelines of European Commission Decision (2002) 2002/657/EC. The method produced clean extracts with generally low matrix effect during LC-MS/MS analysis. The mean recoveries ranged between 24-162%, 48-151%, 51-159%, and 50-149% for 10, 20, 50 and 100 µg/kg spiking levels, respectively, with acceptable precision. The analytical method was sensitive enough to achieve 0.01-34.3 µg/kg and 0.03-115 µg/kg limits of detection and quantitation, respectively. The scope of the method was demonstrated by analyzing complex solid environmental matrices (chicken manure, swine manure, poultry feed and soil) spiked at 10, 20, 50 and 100 µg/kg levels. The method was also applied for the antibiotic analysis in samples with incurred residues. Different matrices in the order of the magnitude as sediments < poultry feed < swine manure < soil < chicken manure were detected with the residues of fluoroquinolone, macrolide, sulfonamide and tetracycline antibiotics.

The difference in dissipation of clomazone and metazachlor in soil under field and laboratory conditions and their uptake by plants

The study concerned dissipation of metazachlor and clomazone, herbicides widely used in rapeseed (Brassica napus L. subsp. napus) protection, applied to the clay soil under field and laboratory conditions. Furthermore, the uptake of these pesticide from soil by rapeseed plants was investigated under field conditions. An additional aim of this work was to modify the QuEChERS method for the determination of metazachlor and clomazone in the plant material. Analytical procedures for metazachlor and clomazone qualification and quantification in rapeseed plants and soil were developed, using gas chromatography with an micro electron capture detector (GC-μECD) and a mass detector (GC-MS/MS QqQ) as confirmation. Dissipation kinetics of herbicide residues in soil were described as first-order equations. The analytical performance was very satisfactory and confirmed that the methods meet the requirements of the European Commission. In the conducted field experiments it was found that dissipation of clomazone and metazachlor in clay soil follows first-order kinetics (R2 between 0.964 and 0.978), and half-lives were 9.5 days and 10.2 days for clomazone and metazachlor, respectively. Under laboratory conditions, dissipation of clomazone and metazachlor in soil also follows first-order kinetics (R2 between 0.937 and 0.938), and half-lives were 8.8 days and 5.7 days for clomazone and metazachlor, respectively. Residues of both herbicides in rape plants 22 days after application of herbicides were below the maximum residue levels for Brassica plants. Metazachlor and clomazone dissipate very fast in clay soil and their uptake by rape plants is very low.

Scaling up the electrokinetic-assisted phytoremediation of atrazine-polluted soils using reversal of electrode polarity: A mesocosm study

Electrokinetic-assisted phytoremediation (EKPR) has been recently proposed for the removal of pesticides from polluted soils. In this work, we report the results from an EKPR experiment that was carried out in a mesocosm mock-up of 0.386 m³ using ryegrass (Lolium perenne L.) and a low permeability soil spiked with atrazine. Plants were initially grown for 35 days; then, the soil was spiked with atrazine at a dose of 2 mg kg^-1 soil. A DC electrical field of 0.6 V cm^-1 was applied 24 h every day, switching polarity daily. Another identical mock-up with the same experimental conditions but without plants was used for comparison purposes. The duration of the EKPR test was 19 days during which some operational parameters were registered (electric current intensity, soil pH and temperature) and soil porewater samples were taken and analysed. Plant tissues and soil samples from the different sections in which the mock-ups were divided, were also collected and analysed at the end of the experiment. 3-D profiles of soil pH, water content and atrazine residues concentration in plants and soil were obtained and discussed. The results of this experiment were compared with others previously reported by us from a similar EKPR pot test. In spite of the difficulties to get an adequate geometric and operational similarity between setups of different scale, the main output parameters of the EKPR process (electric current, specific current charge, overall atrazine removal, specific atrazine removal efficiency, root biomass:soil weight ratio) were discussed. It was shown that, although the processes carried out are essentially the same in both scales, their extent may be quite different; it highlights the limitations of small-scale experiments to predict the results at field conditions.

Electrospun terpolymeric nanofiber membrane for micro solid-phase extraction of diazinon and chlorpyrifos from aqueous samples

The present study deals with the synthesis and electrospining of a new terpolymer nanofiber in order to determine the amount of diazinon and chlorpyrifos in water and fruit juice samples. The synthesized terpolymer and the prepared nanofiber were characterized using ¹ H NMR spectroscopy, FTIR spectroscopy, scanning electron microscopy, and gel permeation chromatography. The performance of terpolymer nanofiber, prepared as a sorbent for micro solid phase extraction was investigated for the extraction of diazinon and chlorpyrifos from aquaeous media. Then, the target analytes were desorbed from the coating with an organic solvent and analyzed by gas chromatography with flame ionization detector. Extraction efficiencies were significant (>90%) under the optimum condition. The proposed method also demonstrated good linear dynamic ranges for diazinon and chlorpyrifos (3-250 and 5-200 µg/L), and low limit of detections (0.5 and 0.7 µg/L) respectively. Moreover, under optimum condition for extraction of diazinon and chlorpyrifos, square of correlation coefficients (R² ) of 0.9978 and 0.9953 and relative standard deviations of 4.6 and 5.1% were achieved, respectively. The recoveries for diazinon and chlorpyrifos were in the range of 85-97%.