Development and characterization of parenteral nanoemulsions containing thalidomide

Preparation and Evaluation of a Self-Emulsifying Drug Delivery System for Improving the Solubility and Permeability of Ticagrelor

Ticagrelor (TCG) is a BCS class IV antiplatelet drug used to prevent platelet aggregation in patients with acute coronary syndrome, having poor solubility and permeability. The goal of this study was to develop a self-nanoemulsifying drug delivery system (SNEDDS) of TCG to improve its solubility and permeability. The excipients were selected based on the maximum solubility of TCG and observed by UV spectrophotometer. Different combinations of oil, surfactant, and co-surfactant (1:1, 2:1, and 3:1) were used to prepare TCG-SNEDDS formulations, and pseudo-ternary phase diagrams were plotted. The nanoemulsion region was observed. Clove oil (10-20%), Tween-80 (45-70%), and PEG-400 (20-45%) were used as an oil, surfactant, and co-surfactant, respectively. The selected formulations (F1, F2, F3, F4, F5, and F6) were analyzed for ζ potential, polydispersity index (PDI), ζ size, self-emulsification test, cloud point determination, thermodynamic studies, entrapment efficiency, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), in vitro dissolution, ex vivo permeation, and pharmacodynamic study. The TCG-SNEDDS formulations exhibited ζ potential from -9.92 to -6.23 mV, a ζ average of 11.85-260.4 nm, and good PDI. The in vitro drug release in phosphate buffer pH 6.8 from selected TCG-SNEDDS F4 was about 98.45%, and F6 was about 97.86%, displaying improved dissolution of TCG in 0.1 N HCl and phosphate buffer pH 6.8, in comparison to 28.05% of pure TCG suspension after 12 h. While the in vitro drug release in 0.1 N HCl from F4 was about 62.03%, F6 was about 73.57%, which is higher than 10.35% of the pure TCG suspension. In ex vivo permeability studies, F4 also exhibited an improved apparent permeability of 2.7 × 10-6versus 0.6708 × 10-6 cm2/s of pure drug suspension. The pharmacodynamic study in rabbits demonstrated enhanced antiplatelet activity from TCG-SNEDDS F4 compared to that from pure TCG suspension. These outcomes imply that the TCG-SNEDDS may serve as an effective means of enhancing TCG's antiplatelet activity by improving the solubility and permeability of TCG.

Formulation and in vitro characterization of nanoemulsions containing remdesivir or licorice extract: A potential subcutaneous injection for coronavirus treatment

The management of coronavirus necessitates that medicines are available, reasonably priced, and easy to administer. The work aimed at formulating and characterizing remdesivir and licorice extract nanoemulsions and comparing their efficacy against coronavirus for further subcutaneous injection. First, the solubility of remdesivir was determined in different oils, surfactants, and co-surfactants to choose the optimal nanoemulsion components. Nanoemulsions were optimized concerning surfactant: co-surfactant ratio (5:1, 4:1, 3:1, 2:1, and 1:1) and oil to surfactant: co-surfactant ratio (1:9, 1:8, 1:7, 1:6, 1:5, 1:4, 1:3, 1:2, and 1:1). The formulations were evaluated concerning % transmittance, emulsification time, pH, viscosity, droplet size, polydispersity index, zeta potential, drug content, transmission electron microscopy, in-vitro drug release, stability (of the optimal formulas), and antiviral effect against coronavirus. The optimal nanoemulsion formula was F7, exhibiting an acceptable pH level, a rapid emulsification rate, a viscosity of 20 cP, and 100% drug content. The formulation droplet size was 16 and 17 nm, the polydispersity index was 0.18 and 0.26, and the zeta potential was - 6.29 and - 10.34 mV for licorice extract and remdesivir nanoemulsions, respectively. However, licorice extract nanoemulsion exhibited better release and physical stability. Licorice extract nanoemulsion may be a potential subcutaneous injection for combating mild to moderate coronavirus.

Nanoemulsion Improves the Anti-Inflammatory Effect of Intraperitoneal and Oral Administration of Carvacryl Acetate

Carvacryl acetate (CA) is a monoterpene obtained from carvacrol, which exhibits anti-inflammatory activity. However, its low solubility in aqueous media limits its application and bioavailability. Herein, we aimed to develop a carvacryl acetate nanoemulsion (CANE) and assess its anti-inflammatory potential in preclinical trials. The optimized nanoemulsion was produced by ultrasound, and stability parameters were characterized for 90 days using dynamic light scattering after hydrophilic-lipophilic balance (HLB) assessment. To evaluate anti-inflammatory activity, a complete Freund's adjuvant-induced inflammation model was established. Paw edema was measured, and local interleukin (IL)-1β levels were quantified using ELISA. Toxicity was assessed based on behavioral changes and biochemical assays. The optimized nanoemulsion contained 3% CA, 9% surfactants (HLB 9), and 88% water and exhibited good stability over 90 days, with no signs of toxicity. The release study revealed that CANE followed zero-order kinetics. Dose-response curves for CA were generated for intraperitoneal and oral administration, demonstrating anti-inflammatory effects by both routes; however, efficacy was lower when administered orally. Furthermore, CANE showed improved anti-inflammatory activity when compared with free oil, particularly when administered orally. Moreover, daily treatment with CANE did not induce behavioral or biochemical alterations. Overall, these findings indicate that nanoemulsification can enhance the anti-inflammatory properties of CA by oral administration.

Nano-Emulsion Based Gel for Topical Delivery of an Anti-Inflammatory Drug: In vitro and in vivo Evaluation

Introduction

Arthritic disorder is a common disease in elderly patients and the most common cause of joint dysfunction. This study aims to design Piroxicam-loaded nanoemulsion (PXM-NE) formulations to enhance the analgesic and anti-inflammatory activity of the drug for topical use.

Methods

The nanoemulsion preparations were designed based on a high-pressure homogenization technique and were characterized for particle size (PS), poly dispersity index (Pi), zeta potential (ZP), drug content, and the selected formula was investigated for its topical analgesic activity and pharmacokinetic parameters.

Results

The characterizations showed that the PS was 310.20±19.84 nm, Pi was 0.15±0.02, and ZP was -15.74±1.6 mV for the selected formula. A morphology study showed that the PXM-NE droplets were spherical with a uniform size distribution. The in vitro release study showed a biphasic release pattern with a rapid release within the first 2 hours followed by a sustained release pattern. The analgesic activity for optimal formula was 1.66 times higher than the commercial gel with a double duration of analgesic activity. The C_max was 45.73±9.95 and 28.48±6.44 ng/mL for the gel form of the selected formula and the commercial gel respectively. The relevant bioavailability of the selected formula was 2.41 higher than the commercial gel.

Conclusion

The results showed good physicochemical properties, higher bioavailability, and a longer analgesic effect of PXM from nanoemulsion gel, as compared to the commercial product.

Food grade nanoemulsions: promising delivery systems for functional ingredients

Nano-emulsions are receiving great attention in various industries, especially in the food sector. Peculiar properties of nano-sized droplets and high surface area are most suited for the development and delivery of functional ingredients. Nano-emulsions systems are suitable for encapsulation, protection, improving bioavailability, and target release of sensitive functional compounds. Nano-emulsions have promising potential for the delivery of nutraceuticals, probiotics, flavors, and colors. Nano-emulsions with active ingredients (antimicrobials) have a key part in ensuring food safety, nutrition, and quality of food. Nanoemulsions can also be used for biodegradable coating, packaging, antimicrobial coating, and quality and shelf life enhancement of different foods. The current review includes an overview of nanotechnology nano-emulsions, materials, techniques for formulation & production of nano-emulsions for food and nutrition. Furthermore, the analytical approaches used for the characterization of nano-emulsions and finally, the applications and limitations of nano-emulsions in the food industry are discussed in detail.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05387-3.

Preparation and evaluation of radiolabeled gliclazide parenteral nanoemulsion as a new tracer for pancreatic β-cells mass

PURPOSE

The present investigation aims to develop and evaluate a radiopharmaceutical for targeting and assessing β-cells mass based on gliclazide, an antidiabetic drug that specifically binds the sulfonylurea receptor unique to the β-cells of the pancreas.

METHODS

Conditions were optimized to radiolabel gliclazide with radioiodine via electrophilic substitution reaction. Then, it was formulated as a nanoemulsion system using olive oil and egg lecithin by hot homogenization followed by ultrasonication. The system was assessed for its suitability for parenteral administration and drug release. Then, the tracer was evaluated in silico and in vivo in normal and diabetic rats.

RESULTS AND CONCLUSIONS

The labeled compound was obtained with a high radiochemical yield (99.3 ± 1.1%) and good stability (>48 h). The radiolabeled nanoemulsion showed an average droplet size of 24.7 nm, a polydispersity index of 0.21, a zeta potential of -45.3 mV, pH 7.4, an osmolality of 285.3 mOsm/kg, and viscosity of 1.24 mPa.s, indicating suitability for parenteral administration. In silico assessment suggested that the labeling did not affect the biological activity of gliclazide. The suggestion was further supported by the in vivo blocking study. Following intravenous administration of nanoemulsion, the pancreas uptake was highest in normal rats (19.57 ± 1.16 and 12 ± 0.13% ID) compared to diabetic rats (8.51 ± 0.16 and 5 ± 0.13% ID) at 1 and 4 h post-injection, respectively. All results supported the feasibility of radioiodinated gliclazide nanoemulsion as a tracer for pancreatic β-cells.

Persistent Degradation of HER2 Protein by Hybrid nanoPROTAC for Programmed Cell Death

Proteolysis-targeting chimera (PROTAC) has emerged as a promising strategy for degrading proteins of interest. Peptide-based PROTACs offer several advantages over small-molecule-based PROTACs, such as high specificity, low toxicity, and large protein-protein interaction surfaces. However, peptide-based PROTACs have several intrinsic shortcomings that strongly limit their application including poor cell permeability and low stability and potency. Herein, we designed a nanosized hybrid PROTAC (GNCTACs) to target and degrade human epidermal growth factor receptor 2 (HER2) in tumor cells. Gold nanoclusters (GNCs) were utilized to connect HER2-targeting peptides and cereblon (CRBN)-targeting ligands. GNCTACs could overcome the intrinsic barriers of peptide-based PROTACs, efficiently delivering HER2-targeting peptides in the cytoplasm and protecting them from degradation. Furthermore, a fasting-mimicking diet was applied to enhance the cellular uptake and proteasome activity. Consequently, more than 95% of HER2 in SKBR3 cells was degraded by GNCTACs, and the degradation lasted for at least 72 h, showing a catalytic-like reaction.

A Novel Nanoemulsion Formula for an Improved Delivery of a Thalidomide Analogue to Triple-Negative Breast Cancer; Synthesis, Formulation, Characterization and Molecular Studies

Background

Thalidomide (THD) and its analogues were recently reported as a promising treatment for different types of solid tumors due to their antiangiogenic effect.

Methods

In this work, we synthesized a novel THD analogue (TA), and its chemistry was confirmed with different techniques such as IR, mass spectroscopy, elemental analysis as well as ¹H and ¹³C NMR. To increase solubility and anticancer efficacy, a new oil in water (O/W) nanoemulsion (NE) was used in the formulation of the analogue. The novel formula's surface charge, size, stability, FTIR, FE-TEM, in vitro drug release and physical characteristics were investigated. Furthermore, molecular docking studies were conducted to predict the possible binding modes and molecular interactions behind the inhibitory activities of the THD and TA.

Results

TA showed a significant cytotoxic activity with IC₅₀ ranging from 0.326 to 43.26 µmol/mL when evaluated against cancerous cells such as MCF-7, HepG2, Caco-2, LNCaP and RKO cell lines. The loaded analogue showed more potential cytotoxicity against MDA-MB-231 and MCF-7-ADR cell lines with IC₅₀ values of 0.0293 and 0.0208 nmol/mL, respectively. Moreover, flow cytometry of cell cycle analysis and apoptosis were performed showing a suppression in the expression levels of TGF-β, MCL-1, VEGF, TNF-α, STAT3 and IL-6 in the MDA-MB-231 cell line.

Conclusion

The novel NE formula dramatically reduced the anticancer dosage of TA from micromolar efficiency to nanomolar efficiency. This indicates that the synthesized analogue exhibited high potency in the NE formulation and proved its efficacy against triple-negative breast cancer cell line.

Intranasally administered melatonin core-shell polymeric nanocapsules: A promising treatment modality for cerebral ischemia

AIMS

The neurohormone melatonin (MEL) has been reported as a promising neuroprotective molecule, however it suffers pharmaceutical limitations such as poor solubility and low bioavailability, which hinder its pharmacological and clinical potential. In the current work, MEL was loaded in core-shell nanocarrier system; polymeric nanocapsules (PNCs), and assessed for its potential in cerebral ischemia reperfusion injury rat model when administered intranasally.

KEY FINDINGS

Adopting a D-optimal factorial design, MEL-PNCs were successfully formulated using the nanoprecipitation technique. MEL-PNCs exhibited a particle size ranging from 143.5 to 444 nm, negative zeta potential values ranging from -24.2 to -38.7 mV, cumulative release % for MEL ranging from 36.79 to 41.31 % over 8 h period, with overall good storage properties. The selected MEL-PNCs formulation displayed 8-fold higher permeation than the drug solution across sheep nasal mucosa. MEL-PNCs administered intranasally decreased oxidative stress and hippocampal inflammation, and the histological examination revealed the significant restoration of hippocampal neurons.

SIGNIFICANCE

MEL-PNCs administered intranasally could be a promising treatment modality in brain ischemia.

Paclitaxel and Myrrh oil Combination Therapy for Enhancement of Cytotoxicity against Breast Cancer; QbD Approach

Paclitaxel (PX), plant alkaloid, is a chemotherapeutic agent intended for treating a wide variety of cancers. The objective of the present study was to formulate and evaluate the anticancer activity of PX loaded into a nanocarrier, mainly PEGylated nanoemulsion (NE) fabricated with myrrh essential oil. Myrrh essential oil has been estimated previously to show respectable anticancer activity. Surface modification of the formulation with PEG-DSPE would help in avoiding phagocytosis and prolong the residence time in blood circulation. Various NE formulations were developed after operating (22) factorial design, characterized for their particle size, in vitro release, and hemolytic activity. The optimized formula was selected and compared to its naked counterpart in respect to several characterizations. Quantitative amount of protein absorbed on the formulation surfaces and in vitro release with and without serum incubation were evaluated. Ultimately, MTT assay was conducted to distinguish the anti-proliferative activity. PEGylated PX-NE showed particle size 170 nm, viscosity 2.91 cP, in vitro release 57.5%, and hemolysis 3.44%, which were suitable for intravenous administration. A lower amount of serum protein adsorbed on PEGylated PX-NE surface (16.57 µg/µmol) compared to naked counterpart (45.73 µg/µmol). In vitro release from PEGylated NE following serum incubation was not greatly affected (63.3%), in contrast to the naked counterpart (78.8%). Eventually, anti-proliferative effect was obtained for PEGylated PX-NE achieving IC50 38.66 µg/mL. The results obtained recommend PEGylated NE of myrrh essential oil as a candidate nanocarrier for passive targeting of PX.

Nanoemulsion and Solid Nanoemulsion for Improving Oral Delivery of a Breast Cancer Drug: Formulation, Evaluation, and a Comparison Study

Letrozole (LZ) is an aromatase inhibitor, which inhibits the formation of estrogens from androgens. Nanoemulsion is a liquid emulsion formulation utilized to increase solubility, bioavailability, and drug delivery to cancer cells. This study aims to improve LZ oral delivery through formulating solid nanoemulsion (SNE). Peppermint oil, tween 80, and transcutol P were used as an oil, surfactant, and co-surfactant, respectively. The optimized nanoemulsion (NE-3) was then incorporated into solid polyethylene glycol (PEG) to formulate (SNE). The optimized (NE-3), SNE-2, and the available marketed tablet have been compared. The optimized (NE-3) was selected according to specific parameters of optimum small nano-size 80 nm, PDI of 0.181, the zeta potential of-98.2, high transmittance (99.78%), optimum pH (5.6), a high percent of LZ content (99.03 ± 1.90), the relatively low viscosity of 60.2 mPa.s, and a rapid release of LZ within 30 min. NE-3 was selected to be formulated as SNE. LZ's best release rate was 80% in 5 min with a content homogeneity of 99.85 ± 0.04 for SNE-2. Zero-order kinetics is determined to have the greatest R² values. Field emission scanning electron microscopy (FE-SEM) detected that SNE-2 was (36.75-96.64 nm) with a spherical form and no adhesion or aggregation. FT-IR showed no significant variations in position and shape of the absorption peaks between the pure drug and optimal formulation diagrams. This novel nanoemulsion technology aids in improving the solubility of poorly water-soluble drugs, particularly the SNE delivery method, which has a higher in-vitro release rate and expiration date of LZ than others.

Mycobacterium tuberculosis and Paracoccidioides brasiliensis Formation and Treatment of Mixed Biofilm In Vitro

Co-infection of Mycobacterium tuberculosis and Paracoccidioides brasiliensis, present in 20% in Latin America, is a public health problem due to a lack of adequate diagnosis. These microorganisms are capable of forming biofilms, mainly in immunocompromised patients, which can lead to death due to the lack of effective treatment for both diseases. The present research aims to show for the first time the formation of mixed biofilms of M. tuberculosis and P. brasiliensis (Pb18) in vitro, as well as to evaluate the action of 3’hydroxychalcone (3’chalc) -loaded nanoemulsion (NE) (NE3’chalc) against monospecies and mixed biofilms, the formation of mixed biofilms of M. tuberculosis H37Rv (ATCC 27294), 40Rv (clinical strains) and P. brasiliensis (Pb18) (ATCC 32069), and the first condition of formation (H37Rv +Pb18) and (40Rv + Pb18) and second condition of formation (Pb18 + H37Rv) with 45 days of total formation time under both conditions. The results of mixed biofilms (H37Rv + Pb18) and (40Rv + Pb18), showed an organized network of M. tuberculosis bacilli in which P. brasiliensis yeasts are connected with a highly extracellular polysaccharide matrix. The (Pb18 + H37Rv) showed a dense biofilm with an apparent predominance of P. brasiliensis and fragments of M. tuberculosis. PCR assays confirmed the presence of the microorganisms involved in this formation. The characterization of NE and NE3’chalc displayed sizes from 145.00 ± 1.05 and 151.25 ± 0.60, a polydispersity index (PDI) from 0.20± 0.01 to 0.16± 0.01, and zeta potential -58.20 ± 0.92 mV and -56.10 ± 0.71 mV, respectively. The atomic force microscopy (AFM) results showed lamellar structures characteristic of NE. The minimum inhibitory concentration (MIC) values of 3’hidroxychalcone (3’chalc) range from 0.97- 7.8 µg/mL and NE3’chalc from 0.24 - 3.9 µg/mL improved the antibacterial activity when compared with 3’chalc-free, no cytotoxicity. Antibiofilm assays proved the efficacy of 3’chalc-free incorporation in NE. These findings contribute to a greater understanding of the formation of M. tuberculosis and P. brasiliensis in the mixed biofilm. In addition, the findings present a new possible NE3’chalc treatment alternative for the mixed biofilms of these microorganisms, with a high degree of relevance due to the lack of other treatments for these comorbidities.

Oral and Topical Anti-Inflammatory and Antipyretic Potentialities of Araucaria bidiwillii Shoot Essential Oil and Its Nanoemulsion in Relation to Chemical Composition

Different parts of Araucaria bidiwillii (bunya pin) trees, such as nuts, seeds, bark, and shoots, are widely used in cooking, tea, and traditional medicines around the world. The shoots essential oil (EO) has not yet been studied. Herein, the chemical profile of A. bidiwillii shoots EO (ABSEO) was created by GC–MS analysis. Additionally, the in vivo oral and topical anti-inflammatory effect against carrageenan-induced models, as well as antipyretic potentiality of ABSEO and its nanoemulsion were evaluated. Forty-three terpenoid components were identified and categorized as mono- (42.94%), sesqui- (31.66%), and diterpenes (23.74%). The main compounds of the ABSEO were beyerene (20.81%), α-pinene (16.21%), D-limonene (14.22%), germacrene D (6.69%), β-humulene (4.14%), and sabinene (4.12%). The ABSEO and its nanoemulsion exhibited significant inflammation suppression in carrageenan-induced rat paw edema model, in both oral (50 and 100 mg/kg) and topical (5% in soyabean oil) routes, compared to the control and reference drugs groups. All the results demonstrated the significant inflammation reduction via the inflammatory cytokines (IL-1β and IL8), nitrosative (NO), and prostaglandin E2 (PGE2) supported by the histopathological studies and immunohistochemical assessment of MMP-9 and NF-κβ levels in paw tissues. Moreover, the oral administration of ABSEO and its nanoemulsion (50 and 100 mg/kg) exhibited antipyretic activity in rats, demonstrated by the inhibition of hyperthermia induced by intramuscular injection of brewer’s yeast. These findings advised that the use of ABSEO and its nanoemulsion against numerous inflammatory and hyperthermia ailments that could be attributed to its active constituents.

Inhibition of aldehyde dehydrogenase by furazolidone nanoemulsion to decrease cisplatin resistance in lung cancer cells

Aim: The overexpression of aldehyde dehydrogenase (ALDH) in cancer cells contributes to therapeutic resistance. Furazolidone (FUR) is a strong ALDH inhibitor. Methods: FUR nanoemulsion (NE) was formulated and tested for ALDH inhibitory activity in comparison with free FUR. The cytotoxic potential of cisplatin was evaluated in combination with free FUR and FUR NE. Results: The optimized FUR NE showed droplet size of 167.9 ± 3.1 nm and drug content of 84.2 ± 2.3%. FUR NE inhibited 99.75 ± 2.1% of ALDH activity while 25.0 ± 4.6% was inhibited by free FUR. FUR NE increased the sensitivity to cisplatin in A549 cells by more than tenfold by its ALDH inhibitory effects. Conclusion: This finding can be a promising approach to improve cancer survival in ALDH-positive drug-resistant cancers.

Preparation of glutathione loaded nanoemulsions and testing of hepatoprotective activity on THLE-2 cells

To improve bioavailability and stability of hydrophobic and hydrophilic compounds, nanoemulsions are good alternatives as delivery systems because of their nontoxic and nonirritant nature. Glutathione (GSH) suffers from low stability in water, where its encapsulation in nanoemulsions is a powerful strategy to its stability in aqueous systems. The aim of this study was to obtain nanoemulsions from the hydrophobic/hydrophilic contents of N. sativa seed oil so as to improve GSH stability along with bioavailability of N. sativa seed oil. Then, the prepared nanoemulsions were tested for in vitro hepatoprotective activity against ethanol toxicity. To the best of our knowledge, there is no study on the test of nanoemulsions by the combination of Nigella sativa seed oils and GSH in hepatoprotective activity. Here, nanoemulsions with different contents were prepared using Nigella sativa seed oils. Content analyses and characterisation studies of prepared nanoemulsions were carried out. In order to investigate the protective effects against to ethanol exposure, THLE-2 cells were pretreated with nanoemulsions for 2 h with the maximum benign dose (0.5 mg/mL of nanoemulsions). Ethanol (400 mM) was introduced to pretreated cells and nontreated cells for 48- or 72-h periods, followed by cell viability assay was carried out. Fluorescence microscopy tests revealed the introduction of the nanoemulsions into THLE-2 cells. The findings show that nanoformulations have promising in vitro hepatoprotective effects on the THLE-2 cell line against ethanol exposure.

Date Palm Extract (Phoenix dactylifera) PEGylated Nanoemulsion: Development, Optimization and Cytotoxicity Evaluation

Date palm fruit (Phoenix dactylifera) is reputed to have numerous biological activities, including anticancer properties. To utilize the great fortune of this fruit, the current study aimed to maximize its pharmacological activity. Date palm extract (DPE) of Khalas cultivar was obtained in powder form and then was formulated into nanoemulsion (NE). The optimized DPE-NE was formulated along with its naked counterpart followed by studying their physical and chemical properties. A qualitative assessment of total serum protein associated with the surface of formulations was implemented. Studies for the in vitro release of DPE from developed NE before and after incubation with serum were investigated. Eventually, an MTT assay was conducted. Total phenolic and flavonoid contents were 22.89 ± 0.013 mg GAE/g of dry DPE and 9.90 ± 0.03 mg QE/g of dry DPE, respectively. Homogenous NE formulations were attained with appropriate particle size and viscosity that could be administered intravenously. The optimized PEGylated NE exhibited a proper particle size, PDI, and zeta potential. Total serum protein adsorbed on PEG-NE surface was significantly low. The release of the drug through in vitro study was effectively extended for 24 h. Ultimately; PEGylated NE of DPE attained significant inhibition for cancer cell viability with IC₅₀ values of 18.6 ± 2.4 and 13.5 ± 1.8 µg/mL for MCF-7 and HepG2 cell lines, respectively. PEGylated NE of DPE of Khalas cultivar will open the gate for future adjuvants for cancer therapy.

Nanoemulsion: A Novel Drug Delivery Approach for Enhancement of Bioavailability

BACKGROUND

Poor bioavailability and solubility of drugs in aqueous phase are the most important problems of newly developed chemical entities that can be improved by nanoemulsion.

OBJECTIVES

BCS class II and IV which are poorly soluble in water demonstrate various problems in conventional dosage forms. For the improvement of solubility, bioavailability and getting the best therapeutic effect of poorly soluble drugs nanoemulsion is the best solution.

METHODS

Nanoemulsion are thermodynamically unstable isotropic system with droplet size 1-100 nm in which two immiscible fluids are combined together to form one phase by using an emulsifying agent. Nanoemulsion can be designed to promote the bioavailability of API by trapping them inside.

RESULTS

Nanoemulsion can be developed in many dosage forms such as oral, parenteral, topical, ophthalmic dosage form in large scale using common operation at a very low cost. Large range of lipophilic drugs can be easily incorporated in nanoemulsion.

CONCLUSION

In this review, attention is focused on the type of nanoemulsions, their advantages over other dosage form, method for their preparation, characterization, applications and patents in various fields.

Cordyceps militaris Fungus Extracts-Mediated Nanoemulsion for Improvement Antioxidant, Antimicrobial, and Anti-Inflammatory Activities

This study aimed to produce and optimize a Cordyceps militaris-based oil-in-water (O/W) nanoemulsion (NE) encapsulated in sea buckthorn oil (SBT) using an ultrasonication process. Herein, a nonionic surfactant (Tween 80) and chitosan cosurfactant were used as emulsifying agents. The Cordyceps nanoemulsion (COR-NE) was characterized using Fourier-transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), and field-emission transmission electron microscope (FE-TEM). The DLS analyses revealed that the NE droplets were 87.0 ± 2.1 nm in diameter, with a PDI value of 0.089 ± 0.023, and zeta potential of -26.20 ± 2. The small size, low PDI, and stable zeta potential highlighted the excellent stability of the NE. The NE was tested for stability under different temperature (4 °C, 25 °C, and 60 °C) and storage conditions for 3 months where 4 °C did not affect the stability. Finally, in vitro cytotoxicity and anti-inflammatory activity were assessed. The results suggested that the NE was not toxic to RAW 264.7 or HaCaT (human keratinocyte) cell lines at up to 100 µL/mL. Anti-inflammatory activity in liposaccharides (LPS)-induced RAW 264.7 cells was evident at 50 µg/mL and showed inhibition of NO production and downregulation of pro-inflammatory gene expression. Further, the NE exhibited good antioxidant (2.96 ± 0.10 mg/mL) activity and inhibited E. coli and S. aureus bacterial growth. Overall, the COR-NE had greater efficacy than the free extract and added significant value for future biomedical and cosmetics applications.

Encapsulation of Lipid-Soluble Bioactives by Nanoemulsions

Lipid-soluble bioactives are important nutrients in foods. However, their addition in food formulations, is often limited by limited solubility and high tendency for oxidation. Lipid-soluble bioactives, such as vitamins A, E, D and K, carotenoids, polyunsaturated fatty acids (PUFA) and essential oils are generally dispersed in water-based solutions by homogenization. Among the different homogenization technologies available, nanoemulsions are one of the most promising. Accordingly, this review aims to summarize the most recent advances in nanoemulsion technology for the encapsulation of lipid-soluble bioactives. Modern approaches for producing nanoemulsion systems will be discussed. In addition, the challenges on the encapsulation of common food ingredients, including the physical and chemical stability of the nanoemulsion systems, will be also critically examined.

Enhancement in brain uptake of vitamin D3 nanoemulsion for treatment of cerebral ischemia: formulation, gamma scintigraphy and efficacy study in transient middle cerebral artery occlusion rat models

AIM

For the treatment of cerebral ischaemia, vitamin-D₃ loaded nanoemulsions were developed.

METHOD

Tween 20 and polyethylene glycol were chosen as surfactant/co-surfactant, while oleic acid as the oil phase. The formulation was characterised for various in-vitro parameters. Targeting efficiency was investigated through radiometry, gamma scintigraphy and efficacy was studied in transient middle cerebral artery occlusion (MCAo) rat model.

RESULT

Vitamin D₃-nanoemulsion showed a mean size range of 49.29 ± 10.28 nm with polydispersity index 0.17 ± 0.04 and zeta potential 13.77 mV. The formulation was found stable during thermodynamic stability study and permeated within 180 min through sheep nasal mucosa (permeation coefficient 7.873 ± 0.884 cm/h). Gamma scintigraphy and radiometry assay confirmed better percentage deposition (2.53 ± 0.17%) of ^99mTc-vitamin D₃-nanoemulsion through nasal route compared to IV administered ^99mTc-vitamin D₃ solution (0.79 ± 0.03%). Magnetic Resonance Imaging (MRI) of the ischaemic model confirmed better efficacy of vitamin D₃-nanoemulsion.

CONCLUSION

This work demonstrated better permeation, deposition, and efficacy of vitaminD₃-nanoemulsion through the intranasal route.

Bioinspired Ion Pairs Transforming Papaverine into a Protic Ionic Liquid and Salts

Microbial, mammalian, and plant cells produce and contain secondary metabolites, which typically are soluble in water to prevent cell damage by crystallization. The formation of ion pairs, for example, with carboxylic acids or mineral acids, is a natural blueprint to maintain basic metabolites in solution. Here, we aim at showing whether the mostly large carboxylates form soluble protic ionic liquids (PILs) with the basic natural product papaverine resulting in enhanced aqueous solubility. The obtained PILs were characterized by 1H-15N HMBC nuclear magnetic resonance (NMR) and in the solid state using X-ray powder diffraction, differential scanning calorimetry, and dissolution measurements. Furthermore, their supramolecular pattern in aqueous solution was studied by means of potentiometric and photometrical solubility, NMR aggregation assay, dynamic light scattering, zeta potential, and viscosity measurements. Thereby, we identified the naturally occurring carboxylic acids, citric acid, malic acid, and tartaric acid, as being appropriate counterions for papaverine and which will facilitate the formation of PILs with their beneficial characteristics, like the improved dissolution rate and enhanced apparent solubility.

Development and in vitro Evaluation of Gastro-protective Aceclofenac-loaded Self-emulsifying Drug Delivery System

AIM

Chronic use of oral nonsteroidal anti-inflammatory drugs (NSAIDs) is commonly associated with gastric irritation and gastric ulceration. Therefore, the aim of study was to develop a novel oral drug delivery system with minimum gastric effects and improved dissolution rate for aceclofenac (ACF), a model BCS class-II drug.

METHODS

Self-emulsifying drug delivery systems (SEDDS) were formulated to increase the solubility and ultimately the oral bioavailability of ACF. Oleic acid was used as an oil phase, Tween 80 (T80) and Kolliphor EL (KEL) were used as surfactants, whereas, polyethylene glycol 400 (PEG 400) and propylene glycol (PG) were employed as co-surfactants. Optimized formulations (F1, F2, F3 and F4) were analyzed for droplet size, poly dispersity index (PDI), cell viability studies, in vitro dissolution in both simulated gastric fluid and simulated intestinal fluid, ex vivo permeation studies and thermodynamic stability.

RESULTS

The optimized formulations showed mean droplet sizes in the range of 111.3 ± 3.2 nm and 470.9 ± 12.52 nm, PDI from 244.6 nm to 389.4 ± 6.51 and zeta-potential from -33 ± 4.86 mV to -38.5 ± 5.15 mV. Cell viability studies support the safety profile of all formulations for oral administration. The in vitro dissolution studies and ex vivo permeation analysis revealed significantly improved drug release ranging from 95.68 ± 0.02% to 98.15 ± 0.71% when compared with control. The thermodynamic stability studies confirmed that all formulations remain active and stable for a longer period.

CONCLUSION

In conclusion, development of oral SEDDS might be a promising tool to improve the dissolution of BCS class-II drugs along with significantly reduced exposure to gastric mucosa.

Formulation Design, Statistical Optimization, and In Vitro Evaluation of a Naringenin Nanoemulsion to Enhance Apoptotic Activity in A549 Lung Cancer Cells

Naringenin (NAR), a flavonoid mainly found in citrus and grapefruits, has proven anti-cancer activities. However, the poor water solubility and low bioavailability of NAR limits its use as a therapeutic agent. The aim of this study was to develop and optimize stable naringenin nanoemulsions (NAR-NE) using a Box-Behnken experimental design to obtain a formulation with a higher efficiency. Anticancer activity of optimized NAR-NE was evaluated in A549 lung cancer cells using cell viability, flow-cytometric assays, and enzyme-linked immunosorbent assay. The stabilized nanoemulsion, which showed a spherical surface morphology, had a globule size of 85.6 ± 2.1 nm, a polydispersity index of 0.263 ± 0.02, a zeta potential of -9.6 ± 1.2 mV, and a drug content of 97.34 ± 1.3%. The NAR release from the nanoemulsion showed an initial burst release followed by a stable and controlled release for a longer period of 24 h. The nanoemulsion exhibited excellent thermodynamic and physical stability against phase separation and storage. The NAR-NE showed concentration-dependent cytotoxicity in A549 lung cancer cells, which was greater than that of free NAR. The percentage of apoptotic cells and cell cycle arrest at the G2/M and pre-G1 phases induced by NAR-NE were significantly higher than those produced by free NAR (p < 0.05). NAR-NEs were more effective than the NAR solution in reducing Bcl2 expression, while increasing pro-apoptotic Bax and caspase-3 activity. Therefore, stabilized NAR-NE could be a suitable drug delivery system to enhance the effects of NAR in the treatment of lung cancer.

Nano-emulgel: Emerging as a Smarter Topical Lipidic Emulsion-based Nanocarrier for Skin Healthcare Applications

BACKGROUND

In recent decades, enormous efforts for different drug discovery processes have led to a number of drug molecules available today to overcome different challenges of the health care system. Unfortunately, more than half of these drugs are listed in either BCS (biopharmaceutical classification system) class II/ IV or both are eliminated from the development pipeline due to their limited clinical use. A nanotechnological approach bears much hope and lipoidal fabrication is found to be suitable for the delivery of such drugs. Nanoemulsion based gel i.e. nanoemulgel out of different nanolipoidal formulations has been found to be a suitable approach to successful drug delivery through topical routes. In past few years many herbal and synthetic active pharmaceutical ingredients (APIs) has been patented as nano sized emulsified gel for various therapeutic activities.

METHODS

Nanoemulgel is basically an emulsion-based topical gel formulation, where nanosized emulsion globules can be prepared with the help of high energy or low energy methods and further converted into nanoemulgel by adding a suitable gelling agent. Nanoemulgel fabrication enlists various kinds of polymeric materials, surfactants and fatty substances of natural, synthetic and semi-synthetic nature with a globule size range from 5 to 500 nm.

RESULTS

Nanoemulgel can be applicable to various acute and chronic diseases through topical routes.

CONCLUSION

Nanoemulgel preparations of many recently approved drugs are being used successfully in different areas of health care and have re-defined the significance of topical route of delivery as compared to other routes. However, along with various improvements in the current state of the delivery system, the safety factor needs to be taken into account by toxicological studies of the materials used in such formulations.

Facile methodology of nanoemulsion preparation using oily polymer for the delivery of poorly soluble drugs

Aqueous solubility of an active pharmaceutical ingredient (API) is a determining factor that has a direct impact on formulation strategies and overall bioavailability. Fabrication of nanoemulsions of poorly soluble drugs is one of the widely utilized approaches to overcome this problem. However, thermodynamic instability and tedious manufacturing processes of nanoemulsions limit their clinical translation. Therefore, this study was focused on circumventing the abovementioned hurdles by utilizing the polymer as an oil phase, instead of conventional oils. The nanoemulsion was prepared via a facile low-energy nanoprecipitation method using renewable poly(δ-decalactone) (PDL), as an oil phase and Pluronic F-68 as surfactant. The prepared nanoemulsions were characterized in terms of size, drug encapsulation efficiency, stability, and toxicity. Five different hydrophobic drugs were utilized to evaluate the drug delivery capability of the PDL nanoemulsion. The prepared nanoemulsions with sizes less than 200 nm were capable to enhance the aqueous solubility of the drugs by 3 to 10 times compared with the well-established Pluronic F-68 micelles. No phase separation or significant changes in size and drug content was observed with PDL nanoemulsions after high-speed centrifugation and 3 months of storage at two different temperatures (20 °C and 50 °C). PDL nanoemulsions were found to be non-heamolytic up to concentrations of 1 mg/mL, and the cell cytotoxicity studies on MDA-MB-231 and MEF cells suggest a concentration and time-dependent toxicity, where the PDL polymer itself induced no cytotoxicity. The results from this study clearly indicate that the PDL polymer has a tremendous potential to be utilized as an oil phase to prepare stable nanoemulsions via a facile methodology, ultimately favouring clinical translations.

Graphical abstract

Development Insights of Surface Modified Lipid Nanoemulsions of Dihydroartemisinin for Malaria Chemotherapy: Characterization, and in vivo Antimalarial Evaluation

BACKGROUND

The use of dihydroartemisinin (DHA) for effective malaria treatment is challenged by its poor aqueous solubility and inadequate bioavailability leading to treatment failures and emergence of resistant strains. A review of some novel drug delivery systems developed to address these challenges and their patents revealed that no study has reported the application of surface modified lipid nanoemulsions for improved antimalarial activity of DHA.

OBJECTIVE

The main thrust of this study is to develop oral dihydroartemisinin formulations solubilized in surface modified lipid nanoemulsions, characterize, and evaluate their activity against murine malaria.

METHOD

Lipid nanoemulsions containing dihydroartemisinin were formulated by high pressure homogenization using soybean oil, and polyethylene glycol 4000 was employed for surface modification. The formulations were characterized for droplet size, surface charge, pH, fouriertransform infrared spectroscopy, and surface morphology, viscosity and drug content efficiency. In vitro haemolytic study as a function of cytotoxicity using red blood cells as well as in vivo anti-malarial study using murine malaria model was also investigated.

RESULTS

Nanoemulsions recorded droplet sizes ranging from 26 - 56 nm, and zeta potential in the range of -28 to -35 mV. The formulations were slightly acidic (pH 4.4 - 5.8) with the drug molecularly dispersed as seen using infrared spectroscopy. The formulations showed non- Newtonian flow with significant drug content efficiency in the range of 77-96%. The formulations did not induce haemolysis of cells and showed good clearance of parasitaemia.

CONCLUSION

Surface-modified lipid nanoemulsion is a perfect carrier system for improving the anti-malarial activity of dihydroartemisinin.

A new alternative insight of nanoemulsion conjugated with κ-carrageenan for wound healing study in diabetic mice: In vitro and in vivo evaluation

Astaxanthin and alpha-tocopherol have attracted great attention because of their properties for the management of wound healing in diabetics. This study aimed to investigate the wound healing study of astaxanthin and alpha-tocopherol with κ-carrageenan nanoemulsion (AS-TP@KCNE) and to perform a histopathological study on streptozotocin (STZ)-induced diabetic mice. AS-TP@KCNE were also evaluated with aim of maintaining an effective and prolonged antidiabetic potential. KC@SENE and KC@USNE were obtained by spontaneous and ultrasonication emulsification methods and were characterized for stability, pH, particle size, and zeta potential by standard analysis. In vitro cytotoxicity and wound healing results demonstrated less toxicity and faster cell migration for the nanoemulsions at different concentrations. Based on the promising results, transdermal administration of AS-TP@KCNE can significantly restore the body weight, reduce fasting blood glucose levels, and improve glucose tolerance, which improved the ability to quickly heal of wounds in diabetic mice compared to control. In conclusion, the present study shows that the AS-TP@KCNE are biocompatible and possess healing properties that accelerate wound closure and exhibited better control of hyperglycemia and more superbly reversed the diabetes mellitus complications than STZ-induced diabetic mice. These results suggested that AS-TP@KCNE could be a promising platform for wound healing applications for diabetics.

Nanoemulsions in CNS drug delivery: recent developments, impacts and challenges

Despite enormous efforts, treatment of CNS diseases remains challenging. One of the main issues causing this situation is limited CNS access for the majority of drugs used as part of the therapeutic regimens against life-threatening CNS diseases. Regarding the inarguable position of the nanocarrier systems in neuropharmacokinetic enhancement of the CNS drugs, this review discusses the latest findings on nanoemulsions (NEs) as one of the most promising candidates of this type, to overcome the challenges of CNS drug delivery. Future development of NE-based CNS drug delivery needs to consider so many aspects not only from a physicochemical point of view but also related to the biointerface of these very small droplets before achieving clinical value.

Nanostructured Materials for Food Applications: Spectroscopy, Microscopy and Physical Properties

Nanotechnology deals with matter of atomic or molecular scale. Other factors that define the character of a nanoparticle are its physical and chemical properties, such as surface area, surface charge, hydrophobicity of the surface, thermal stability of the nanoparticle and its antimicrobial activity. A nanoparticle is usually characterized by using microscopic and spectroscopic techniques. Microscopic techniques are used to characterise the size, shape and location of the nanoparticle by producing an image of the individual nanoparticle. Several techniques, such as scanning electron microscopy (SEM), transmission electron microscopy/high resolution transmission electron microscopy (TEM/HRTEM), atomic force microscopy (AFM) and scanning tunnelling microscopy (STM) have been developed to observe and characterise the surface and structural properties of nanostructured material. Spectroscopic techniques are used to study the interaction of a nanoparticle with electromagnetic radiations as the function of wavelength, such as Raman spectroscopy, UV–Visible spectroscopy, attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), dynamic light scattering spectroscopy (DLS), Zeta potential spectroscopy, X-ray photoelectron spectroscopy (XPS) and X-ray photon correlation spectroscopy. Nanostructured materials have a wide application in the food industry as nanofood, nano-encapsulated probiotics, edible nano-coatings and in active and smart packaging.

Improvement of physicochemical properties of nanocolloidal carrier loaded with low water solubility drug for parenteral cancer treatment by Response Surface Methodology

Nanoemulsions have been used as a drug carrier system, particularly for poorly water-soluble drugs. Sorafenib is a poorly soluble drug and also there is no parenteral treatment. The aim of this study is the development of nanoemulsions for intravenous administration of Sorafenib. The formulations were prepared by high energy emulsification method and optimized by using Response Surface Methodology (RSM). Here, the effect of independent composition variables of lecithin (1.16-2.84%, w/w), Medium-Chain Triglycerides (2.32-5.68%, w/w) and polysorbate 80 (0.58-1.42%, w/w) amounts on the properties of Sorafenib-loaded nanoemulsion was investigated. The three responses variables were particle size, zeta potential, and polydispersity index. Optimization of the conditions according to the three dependent variables was performed for the preparation of the Sorafenib-loaded nanoemulsions with the minimum value of particle size, suitable rage of zeta potential, and polydispersity index. A formulation containing 0.05% of Sorafenib kept its properties in a satisfactory range over the evaluated period. The composition with 3% Medium-Chain Triglycerides, 2.5% lecithin and 1.22% polysorbate 80 exhibited the smallest particle size and polydispersity index (43.17 nm and 0.22, respectively) with the zeta potential of -38.8 mV was the optimized composition. The fabricated nanoemulsion was characterized by the transmission electron microscope (TEM), viscosity, and stability assessment study. Also, the cytotoxicity result showed that the optimum formulations had no significant effect on a normal cell in a low concentration of the drug but could eliminate the cancer cells. The dose-dependent toxicity made it a suitable candidate for parenteral applications in the treatment of breast cancer. Furthermore, the optimized formulation indicated good storage stability for 3 months at different temperatures (4 ± 2 °C, 25 ± 2 °C and 45 ± 2 °C).

Nanoemulsions in drug delivery: formulation to medical application

Nanoscale oil-in-water emulsions (NEs), heterogeneous systems of two immiscible liquids stabilized by emulsifiers or surfactants, show great potential in medical applications because of their attractive characteristics for drug delivery. NEs have been explored as therapeutic carriers for hydrophobic compounds via various routes of administration. NEs provide opportunities to improve drug delivery via alternative administration routes. However, deep understanding of the NE manufacturing and functionalization fundamentals, and how they relate to the choice of administration route and pharmacological profile is still needed to ease the clinical translation of NEs. Here, we review the diversity of medical applications for NEs and how that governs their formulation, route of administration, and the emergence of increasing sophistication in NE design for specific application.

How to measure release from nanosized carriers?

Novel drug delivery systems exhibit great potential in the formulation of poorly soluble compounds but have also been applied to reduce side effects of highly active drug molecules. Despite all efforts, there are only few technologies available to investigate the in vitro release of next-generation nanotherapeutics. In the following, different approaches for testing the drug release from nanoparticles in the fields of formulation development and quality control will be discussed. A variety of methods is available, starting from dialysis-based equipment, in situ measurements, flow-through devices and sample and separate setups. If possible, these methods should enable a more rapid formulation development and quality control of nanosized carriers as well as improve the prediction of in vivo performance and clinical outcomes.

Development of nanoemulsion for efficient brain parenteral delivery of cefuroxime: designs, characterizations, and pharmacokinetics

Background and aim

Drugs that are effective against diseases in the central nervous system and reach the brain via blood must pass through the blood-brain barrier (BBB), a unique interface that protects against potential harmful molecules. This presents a major challenge in neuro-drug delivery. This study attempts to fabricate the cefuroxime-loaded nanoemulsion (CLN) to increase drug penetration into the brain when parenterally administered.

Methods

The nanoemulsions were formulated using a high-pressure homogenization technique and were characterized for their physicochemical properties.

Results

The characterizations revealed a particle size of 100.32±0.75 nm, polydispersity index of 0.18±0.01, zeta potential of -46.9±1.39 mV, viscosity of 1.24±0.34 cps, and osmolality of 285.33±0.58 mOsm/kg, indicating that the nanoemulsion has compatibility for parenteral application. CLN was physicochemically stable within 6 months of storage at 4°C, and the transmission electron microscopy revealed that the CLN droplets were almost spherical in shape. The in vitro release of CLN profile followed a sustained release pattern. The pharmacokinetic profile of CLN showed a significantly higher C_max, area under the curve (AUC)_0-t , prolonged half-life, and lower total plasma clearance, indicating that the systemic concentration of cefuroxime was higher in CLN-treated rats as compared to cefuroxime-free treated rats. A similar profile was obtained for the biodistribution of cefuroxime in the brain, in which CLN showed a significantly higher C_max, AUC_0-t , prolonged half-life, and lower clearance as compared to free cefuroxime solution.

Conclusion

Overall, CLN showed excellent physicochemical properties, fulfilled the requirements for parenteral administration, and presented improved in vivo pharmacokinetic profile, which reflected its practical approach to enhance cefuroxime delivery to the brain.

Formulation and characterization of garlic (Allium sativum L.) essential oil nanoemulsion and its acaricidal activity on eriophyid olive mites (Acari: Eriophyidae)

Green and nanoacaricides including essential oil (EO) nanoemulsions are important compounds to provide new, active, safe acaricides and lead to improvement of avoiding the risk of synthetic acaricides. This study was carried out for the first time on eriophyid mites to develop nanoemulsion of garlic essential oil by ultrasonic emulsification and evaluate its acaricidal activity against the two eriophyid olive mites Aceria oleae Nalepa and Tegolophus hassani (Keifer). Acute toxicity of nanoemulsion was also studied on male rats. Garlic EO was analyzed by gas chromatography-mass spectrometry (GC-MS), and the major compounds were diallyl sulfide (8.6%), diallyl disulfide (28.36%), dimethyl tetrasulfide (15.26%), trisulfide,di-2-propenyl (10.41%), and tetrasulfide,di-2-propenyl (9.67%). Garlic oil nanoemulsion with droplet size 93.4 nm was formulated by ultrasonic emulsification for 35 min. Emulsification time and oil and surfactant ratio correlated to the emulsion droplet size and stability. The formulated nanoemulsion showed high acaricidal activity against injurious eriophyid mites with LC₅₀ 298.225 and 309.634 μg/ml, respectively. No signs of nanoemulsion toxicity were noted in treating rats; thus, it may be considered non-toxic to mammals. Stability of garlic oil nanoemulsion, high acaricidal activity, and the absence of organic toxic solvents make the formulation that may be a possible acaricidal product. Results suggest the possibility of developing suitable natural nanoacaricide from garlic oil.

Preparation and characterization of neem oil nanoemulsion formulations against Sitophilus oryzae and Tribolium castaneum adults

This study aimed to improve the efficacy of azadirachtin (Azadirachta indica. A. Juss) against two serious pest species of stored products, Sitophilus oryzae (L.) and Tribolium castaneum (Herbst), through nano-emulsion formulations. Pseudoternary phase diagrams were constructed consisting of an emulsion system of an active ingredient (neem oil), surfactant (polysorbate or alkylpolyglucoside), and water. Isotropic regions were formed in the pseudoternary phase diagrams, and four formulations were selected from the isotropic regions and characterized according to particle size, particle aging, zeta potential, stability and thermostability, surface tension, viscosity, and pH. The selected formulations showed particle sizes of 208-507 nm in diameter. The result of contact toxicity demonstrated excellent mortality of S. oryzae and T. castaneum adults, with a mortality range of 85-100% and 74-100%, respectively, at a 1% azadirachtin concentration after only 2 days of exposure. Compared to non-formulated neem oil, the nano-emulsion formulations significantly increased the mortality of the tested species.

Nanoemulsion: Concepts, development and applications in drug delivery

Nanoemulsions are biphasic dispersion of two immiscible liquids: either water in oil (W/O) or oil in water (O/W) droplets stabilized by an amphiphilic surfactant. These come across as ultrafine dispersions whose differential drug loading; viscoelastic as well as visual properties can cater to a wide range of functionalities including drug delivery. However there is still relatively narrow insight regarding development, manufacturing, fabrication and manipulation of nanoemulsions which primarily stems from the fact that conventional aspects of emulsion formation and stabilization only partially apply to nanoemulsions. This general deficiency sets up the premise for current review. We attempt to explore varying intricacies, excipients, manufacturing techniques and their underlying principles, production conditions, structural dynamics, prevalent destabilization mechanisms, and drug delivery applications of nanoemulsions to spike interest of those contemplating a foray in this field.

Modeling and optimization of nanoemulsion containing Sorafenib for cancer treatment by response surface methodology

The aim of this study is the development of nanoemulsions for intravenous administration of Sorafenib, which is a poorly soluble drug with no parenteral treatment. The formulation was prepared by a high energy emulsification method and optimized by response surface methodology. The effects of overhead stirring time, high shear rate, high shear time, and cycles of high-pressure homogenizer were studied in the preparation of nanoemulsion loaded with Sorafenib. Most of the particles in nanoemulsion are spherical in shape, the smallest particle size being 82.14 nm. The results of the 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, a tetrazole reveal that the optimum formulation does not affect normal cells significantly in low drug concentrations but could remove the cancer cells. Finally, a formulation containing Sorafenib retained its properties over a period of 90 days. With characterization, the study of the formulated nanoemulsion has the potential to be used as a parenteral nanoemulsion in the treatment of cancer. Graphical abstract

Schematic figure of high pressure homogenizer device.

Collapse

An Overview of Therapeutic Applications

Over the last few years' great advances have been made on the development drug delivery systems for different purposes for targeting the diseased conditions. Novel drug delivery originates from polymers or associated with some devices is generally related with the emergence of novel characteristics. These changes are what eventually comprise the value of drug delivery system and Novel drug delivery system. Novel properties become existed without making new materials. Novel drug delivery system comparable to traditional system, following Targeted Drug Delivery System (TDDS) is also called targeting drug system. A new drug delivery system makes the drugs densely gather pathological-change structures, and has an improved healing effect and less toxic side effects. The drugs can improve the strength of pharmacological action and reduce the bad effect all over the body, for they release in the target organs.

Development and evaluation of vitamin E d-α-tocopheryl polyethylene glycol 1000 succinate-mixed polymeric phospholipid micelles of berberine as an anticancer nanopharmaceutical

Berberine (Brb) is an active alkaloid occurring in various common plant species, with well-recognized potential for cancer therapy. Brb not only augments the efficacy of antineoplastic chemotherapy and radiotherapy but also exhibits direct antimitotic and proapoptotic actions, along with distinct antiangiogenic and antimetastatic activities in a variety of tumors. Despite its low systemic toxicity, several pharmaceutical challenges limit the application of Brb in cancer therapy (ie, extremely low solubility and permeability, very poor pharmacokinetics (PKs), and oral bioavailability). Among lipid-based nanocarriers investigated recently for Brb, stealth amphiphilic micelles of polymeric phospholipid conjugates were studied here as a promising strategy to improve Brb delivery to tumors. Specifically, physicochemically stable micelles made of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethyleneglycol)-2000] (PEG-PE) mixed with d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) (PEG-succinate ester of vitamin E), in a 3:1 M ratio, increased Brb solubilization by 300%. Our PEG-PE/TPGS-mixed micelles firmly retained the incorporated Brb, displaying extended-release profile in simulated media, with up to 30-fold projected improvement in simulated PKs of Brb. Owing to the markedly better uptake of Brb-containing mixed micelles in vitro, our Brb-mixed micelles nanoformulation significantly amplified apoptosis and overall cytotoxic effectiveness against monolayer and spheroid cultures of human prostate carcinomas (16- to 18-fold lower half-maximal inhibitory concentration values in PC3 and LNPaC, respectively), compared to free Brb. Mixed PEG-PE/TPGS micelles represent a promising delivery platform for the sparingly soluble anticancer agent, Brb, encouraging further pharmaceutical development of this drug for cancer therapy.

The research about microscopic structure of emulsion membrane in O/W emulsion by NMR and its influence to emulsion stability

PURPOSE

This paper discussed the influence of microstructure of emulsion membrane on O/W emulsion stability.

METHODS

O/W emulsions were emulsified with equal dosage of egg yolk lecithin and increasing dosage of co-emulsifier (oleic acid or HS15). The average particle size and centrifugal stability constant of emulsion, as well as interfacial tension between oil and water phase were determined. The microstructure of emulsion membrane had been studied by (1)H/(13)C NMR, meanwhile the emulsion droplets were visually presented with TEM and IFM.

RESULTS

With increasing dosage of co-emulsifier, emulsions showed two stable states, under which the signal intensity of characteristic group (orient to lipophilic core) of egg yolk lecithin disappeared in NMR of emulsions, but that (orient to aqueous phase) of co-emulsifiers only had some reduction at the second stable state. At the two stable states, the emulsion membranes were neater in TEM and emulsion droplets were rounder in IFM. Furthermore, the average particle size of emulsions at the second stable state was bigger than that at the first stable state.

CONCLUSIONS

Egg yolk lecithin and co-emulsifier respectively arranged into monolayer and bilayer emulsion membrane at the two stable states. The microstructure of emulsion membrane was related to the stability of emulsion.