Adsorption mechanism of As(III) on polytetrafluoroethylene particles of different size

Carrier effects of face mask-derived microplastics on metal ions: Enhanced adsorption by photoaging combined with biofilms, exemplified with Pb(Ⅱ)

Face masks have emerged as a significant source of microplastics (MPs) under the influence of biotic and abiotic interactions. However, the combined effects of abiotic photoaging and biofilm-loading on mask-derived MPs as carriers of metal ions are not clear. We investigated the Pb(Ⅱ) adsorption onto polypropylene (PP) and polyurethane (PU) mask-derived MPs treated by photoaging, biofilm-loading, and both combinations, evaluating the composite risks. PU mask-derived MPs (1.157.47 mg/g) exhibited greater Pb(Ⅱ) adsorption capacity than PP mask-derived MPs (0.842.08 mg/g) because of the presence of intrinsic carbonyl functional groups. Photoaging (30.5%, 88.4%), biofilm-loading (110.7%, 87.1%), and both combinations (146.7%, 547.0%) of PP and PU masks enhanced Pb(Ⅱ) adsorption compared to virgin mask-derived MPs due to the increase of oxygen-containing functional groups. High-throughput sequencing indicated that the structural morphology and chemical composition of masks significantly affected the microbial community. Adsorption mechanisms involved electrostatic force and surface complexation. A combination of photoaging and biofilms increased the ecological risk index of mask-derived MPs in freshwater, showing the risk level to be high (PP mask) and very high (PU mask). This research highlights the crucial role of photoaging combined with biofilms in controlling metal ion adsorption onto mask-derived MPs, thereby increasing the composite risks.

Unveiling the fast adsorption and desorption of heavy metals on/off nanoplastics by real-time in-situ potentiometric sensing

Nanoplastics (<1 μm) can serve as a transport vector of environmental pollutants (e.g., heavy metals) and change their toxicities and bioavailabilities. Up to date the behaviors of adsorption and desorption heavy metals on/off nanoplastics are largely unknown. Herein, polymeric membrane potentiometric ion sensors are proposed for in-situ assessment of the real-time kinetics of heavy metal adsorption and desorption on/off nanoplastics. Results show that nanoplastics can adsorb and release heavy metals in a fast manner, indicating their superior ability in transferring heavy metals. The adsorption behaviors are closely related to the characteristics of nanoplastics and background electrolytes. Particle aggregation and increases in salinity and acidity suppress the adsorption of heavy metals on nanoplastics. The desorption efficiencies of different heavy metals are Pb2+ (31 %) < Cu2+ (40 %) < Cd2+ (97 %). Our proposed method is applicable for the detection of the plastic pollutants with size <100 nm and of the samples with high salinities (e.g., seawater). This work would provide new insights into the assessment of environmental risks posed by nanoplastics and heavy metals.

Two-stage injection of polymer and microsand during ballasted flocculation for treating kaolin waters with or without humic acid: Floc evolutional characteristics, performance and mechanisms

Ballasted flocculation is regarded as a most promising water treatment technology in aspects of retrofit and high-rate applications. To deep understand the incorporation behaviors of ballasting agent into ballasted floc growth, two distinct injection modes (namely a two-stage injection of polyacrylamide (PAM) alone, and a two-stage injection of both PAM and microsand) were developed in this study. Then, ballasted flocculation tests of kaolin and kaolin-HA (humic acid) waters were conducted at varying split ratios for fixed total dosages of both PAM and microsand. The experimental results showed that for either two-stage injection mode, the higher the second percentage of each split ratio, the greater the average size of maturated flocs at the second sub-stage of maturation. Meanwhile, the turbidity and UV254 values of settled water became lower at 30 and 180 s of sedimentation, suggesting that varying split ratios significantly affected the kinetics of ballasted floc growth. Moreover, it was suggested that the selection of either two-stage injection mode or corresponding split ratios played a more pronounced role in the HA removal than the total dosage of PAM. This suggestion was supported by SEM, FTIR and XPS analyses for surface morphological details, functional groups and chemical states of maturated flocs eventually formed in the kaolin-HA water through both two-stage injection modes. Accordingly, newly-established conceptual models of ballasted floc growth were proposed to explore the potential influencing mechanisms of varying split ratios on the ballasted flocculation performance. At each sub-stage of maturation, an appropriate dosage ratio between PAM and microsand was of great importance to effectively incorporate microsand particles into ballasted floc formation, besides the hydrolyzed produces of AS coagulant formed at the coagulation stage of ballasted flocculation. This study is expected to provide valuable insights for making ballasted flocculation more effective, economical and sustainable in water treatment engineering.

Immobilization mechanisms of Sr(II), Ni(II), and Cd(II) on glomalin-related soil protein in mangrove sediments at the microscopic scale

Glomalin-related soil protein (GRSP) is a significant component in the sequestration of heavy metal in soils, but its mechanisms for metal adsorption are poorly known. This study combined spectroscopic data with molecular docking simulations to reveal metal adsorption onto GRSP's surface functional groups at the molecular level. The EXAFS combined with FTIR and XPS analyses indicated that the adsorption of Cd(II), Sr(II), and Ni(II) by GRSP occurred mainly through the coordination of -OH and -COOH groups with the metal. The -COOH and -OH groups bound to the metal as electron donors and the electron density of the oxygen atom decreased, suggesting that electrostatic attraction might be involved in the adsorption process. Two-dimensional correlation spectroscopy revealed that preferential adsorption occurred on GRSP for the metal in sequential order of -COOH groups followed by -OH groups. The presence of the Ni-C shell in the Ni EXAFS spectrum suggested that Ni formed organometallic complexes with the GRSP surface. However, Sr-C and Cd-C were absent in the second shell of the Sr and Cd spectra, which was attributed to the adsorption of Sr and Cd ions with large hydration ion radius by GRSP to form outer-sphere complexes. Through molecular docking simulations, negatively charged residues such as ASP151 and ASP472 in GRSP were found to provide electrostatic attraction and ligand combination for the metal adsorption, which was consistent with the spectroscopic analyses. Overall, these findings provided new insights into the interaction mechanisms between GRSP and metals, which will help deepen our understanding of the ecological functions of GRSP in metal sequestration.

Role of UV radiation and oxidation on polyethylene micro- and nanoplastics: impacts on cadmium sorption, bioaccumulation, and toxicity in fish intestinal cells

This study investigated the role of ultraviolet (UV) radiation and oxidation in high-density polyethylene microplastics (2-15 μm) and nanoplastics (0.2-9.9 μm) (NMPs) on particle chemistry, morphology, and reactivity with cadmium (Cd). Additionally, toxicity of NMPs alone and with Cd was evaluated using RTgutGC cells, a model of the rainbow trout (Oncorhynchus mykiss) intestine. The role on NMPs on Cd bioaccumulation in RTgutGC cells was also evaluated. Dynamic light scattering indicated that after UV radiation NPs agglomerated size increased from 0.8 to 28 µm, and to 8 µm when Cd was added. Oxidized MPs agglomerated size increased from 11 and 7 to 46 and 27 µm in non-UV- and UV-aged oxidized MPs when adding Cd, respectively. Cd-coated particles exhibited generally significantly higher zeta potential than non-Cd-coated particles, while attenuated total reflectance-Fourier transform infrared spectroscopy showed that the functional chemistry of the particles was oxidized and modified after being exposed to UV radiation. Presence of NMPs resulted in a significant decrease in Cd bioaccumulation in RTgutGC cells (100.5-87.9 ng Cd/mg protein) compared to Cd alone (138.1 ng Cd/mg protein), although this was not quite significant for co-exposures with UV-aged NPs (105.7 ng Cd/mg protein). No toxicity was observed in RTgutGC cells exposed to NMPs alone for 24 h. Moreover, co-exposures with Cd indicated that NMPs reduce the toxicity of Cd. Altogether these results show that UV aging enhances NMP surface reactivity, increasing Cd absorption in solution, which resulted in a reduction in Cd bioavailability and toxicity.

Asian clam Corbicula fluminea as potential biomonitor of microplastics and metal(oid)s in a Patagonian River

This study summarizes the concentration in dry weight (dw) of several metal(oid)s (As, Cd, Cr, Cu, Mn, Ni, Pb, and Zn), as well as the abundance and characteristics of microplastics (MP) in wet weight (ww) of the soft tissues of clam Corbicula fluminea from Chubut River (Patagonia, Argentina). The contents of essential elements were in the following decreasing order: Zn > Mn > Cu > Ni; meanwhile, non-essential elements Cd, Cr and Pb were below the detection limit (<0.5 μg/g dw). A high mean concentration of As (6.1 ± 0.3 μg/g dw) was found, surpassing the maximum allowable limit established by the Argentine Food Code for bivalve molluscs. The number of MP ranged from 0.07 to 1.27 items/ind. and from 0.2 to 2.9 items/g ww. Fibers were the most common shape, mainly transparent. The size of MP ranged from 42 to 1917 μm, accounting for 62 % of MP between 50 and 450 μm. The dominant polymer was PET based on the results of Raman spectroscopy. Based on the widespread distribution of MP in the environment and the wide range of effects on organisms, it is necessary to develop long-term monitoring programs for MP contamination in different environmental matrices. Understanding the bioaccumulation of MP in bivalves is crucial to assess the potential risk to human health through consumption and to the ecosystem. We propose that the widespread Asian clam could serve as a useful biomonitor for MP and As pollution in freshwater and estuarine environments such as the Chubut River.

How do polystyrene microplastics affect the adsorption of copper in soil?

Microplastics (MPs) commonly coexist with heavy metals in the soil environment. MPs can influence the activity of heavy metals, and the specific mechanisms need to be further explored. Here, different contents of polystyrene (PS) MPs were added to soil to explore their effects on the adsorption and desorption characteristics of copper (Cu2+) in soil. The adsorption process was mainly chemical adsorption and belonged to a spontaneous, endothermic reaction. The hydrophobicity of MPs slowed down the adsorption and desorption rates. The main adsorption mechanisms included complexation by oxygen-containing functional groups, ion exchange (accounting for 33.97-36.04 % of the total adsorption amounts), and electrostatic interactions. MPs lacked oxygen-containing functional groups and were predominantly engaged in ion exchange and electrostatic interactions. MPs diluted, blocked the soil, and covered the active sites of soil, which reduced adsorption (3.56-16.18 %) and increased desorption (0.90-2.07 %) of Cu2+ in soil samples, thus increasing the activity and mobility of Cu2+. These findings provide new insights into the effects of MPs on the fate and risk of heavy metals in soil. ENVIRONMENTAL IMPLICATION: The existing literature concerning the effects of microplastics on the adsorption of heavy metals in soil is insufficient. Our investigation unveiled that the main adsorption mechanisms of different soil samples included complexation by oxygen-containing functional groups, ion exchange (accounting for 33.97-36.04 % of the total adsorption amounts), and electrostatic interactions. MPs lacked oxygen-containing functional groups and were predominantly engaged in ion exchange and electrostatic interactions. MPs diluted, blocked the soil, and covered the active sites of soil, which reduced adsorption (3.56-16.18 %) and increased desorption (0.90-2.07 %) of Cu2+ in soil samples, thus increasing the activity and mobility of Cu2+.

Microplastics as carriers of toxic pollutants: Source, transport, and toxicological effects

Microplastic pollution has emerged as a new environmental concern due to our reliance on plastic. Recent years have seen an upward trend in scholarly interest in the topic of microplastics carrying contaminants; however, the available review studies have largely focused on specific aspects of this issue, such as sorption, transport, and toxicological effects. Consequently, this review synthesizes the state-of-the-art knowledge on these topics by presenting key findings to guide better policy action toward microplastic management. Microplastics have been reported to absorb pollutants such as persistent organic pollutants, heavy metals, and antibiotics, leading to their bioaccumulation in marine and terrestrial ecosystems. Hydrophobic interactions are found to be the predominant sorption mechanism, especially for organic pollutants, although electrostatic forces, van der Waals forces, hydrogen bonding, and pi-pi interactions are also noteworthy. This review reveals that physicochemical properties of microplastics, such as size, structure, and functional groups, and environmental compartment properties, such as pH, temperature, and salinity, influence the sorption of pollutants by microplastic. It has been found that microplastics influence the growth and metabolism of organisms. Inadequate methods for collection and analysis of environmental samples, lack of replication of real-world settings in laboratories, and a lack of understanding of the sorption mechanism and toxicity of microplastics impede current microplastic research. Therefore, future research should focus on filling in these knowledge gaps.

Interaction mechanism of water-soluble inorganic arsenic onto pristine nanoplastics

Nanoplastics (NPLs) persist in aquatic habitats, leading to incremental research on their interaction mechanisms with metalloids in the environment. In this regard, it is known that plastic debris can reduce the number of water-soluble arsenicals in contaminated environments. Here, the arsenic interaction mechanism with pure NPLs, such as polyethylene terephthalate (PET), aliphatic polyamide (PA), polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), and polystyrene (PS) is evaluated using computational chemistry tools. Our results show that arsenic forms stable monolayers on NPLs through surface adsorption, with adsorption energies of 9-24 kcal/mol comparable to those on minerals and composite materials. NPLs exhibit varying affinity towards arsenic based on their composition, with As(V) adsorption showing higher stability than As(III). The adsorption mechanism results from a balance between electrostatics and dispersion forces (physisorption), with an average combined contribution of 87%. PA, PET, PVC, and PS maximize the electrostatic effects over dispersion forces, while PE and PP maximize the dispersion forces over electrostatic effects. The electrostatic contribution is attributed to hydrogen bonding and the activation of terminal O-C, C-H, and C-Cl groups of NPLs, resulting in several pairwise interactions with arsenic. Moreover, NPLs polarity enables high mobility in aqueous environments and fast mass transfer. Upon adsorption, As(III) keeps the NPLs polarity, while As(V) limits subsequent uptake but ensures high mobility in water. The solvation process is destabilizing, and the higher the NPL polarity, the higher the solvation energy penalty. Finally, the mechanistic understanding explains how temperature, pressure, pH, salinity, and aging affect arsenic adsorption. This study provides reliable quantitative data for sorption and kinetic experiments on plastic pollution and enhances our understanding of interactions between water contaminants.

Adsorption of As(III) by microplastics coexisting with antibiotics

Although recent studies have been conducted on the pollution and toxicity of microplastics with heavy metals or antibiotics, it is necessary to further investigate the coexistence of antibiotics and heavy metals on the surface of microplastics. In this study, the mechanisms of As(III) adsorption by polystyrene (PS) and polyamide (PA) microplastics in the presence of antibiotics (ciprofloxacin, CIP) were investigated. Adsorption behavior was investigated using kinetic and isotherm models, and the effects of microplastic particle size, aging, ion concentration, pH, xanthic acid (FA), and tannic acid (TA) were considered. Adsorption kinetics and isotherm models showed that the kinetics of As(III) adsorption on PS were consistent with a pseudo-first-order model; the kinetics of adsorption on PA were more consistent with segmented linear regression. The Freundlich model is consistent with the adsorption isotherms of As(III) on PS and PA. The smaller the microplastic particle size and the longer the aging time, the better the adsorption of As(III). Increasing NO3-significantly inhibited the adsorption of As(III) by PS, while it first promoted and then inhibited the adsorption by PA. The effect of pH was similar to that ofNO3-. The adsorption of As(III) by PS was significantly promoted by FA and TA, regardless of the presence of CIP; the adsorption of As(III) by PA was inhibited. Scanning electron microscopy (SEM) was used to characterize microscopic morphology of pristine and aged PS and PA microplastics; Fourier transform infrared (FTIR) and X-ray absorption spectroscopy (XPS) revealed changes in surface functional groups of PS and PA, while demonstrating the importance of different functional groups in exogenous additives (CIP and dissolved organic matter, DOM) in the adsorption of As(III). This study provides new insight into adsorption behaviors and interaction mechanisms between ternary pollutants.

Effects of microplastic properties and dissolved organic matter on phosphorus availability in soil and aqueous mediums

Plastic mulching films and phosphate fertilizers have been widely used to improve agricultural soil productivity. Microplastics (MP) and phosphorus (P) significantly accumulate in agricultural soil and water bodies. However, the effects of residual MP on P availability in soil and aqueous mediums remain unclear. In this study, available P (Olsen-P) in soils and P adsorption capacity in aqueous medium were determined to examine the influence of MP properties on P availability in laboratory. In agricultural soils, Olsen-P was significantly affected by MP types. Conventional MP (mulching film particles), such as polyethylene (PE) and polyvinyl chloride (PVC), and biodegradable MP, such as polylactic acid (PLA), substantially reduced soil Olsen-P by 9.7-38.6% and 38.4-73.6%, respectively. The size and concentration of MP strongly affected soil Olsen-P, with smaller (25 μm) and more concentrated (5%) MP causing greater reductions in Olsen-P. In the soil contaminated with MP, increased fulvic acid content significantly increased Olsen-P levels. Microplastics exhibited strong P adsorption capacities, leading to decreased P availability in aqueous medium. Conventional MP exhibited a higher P adsorption capacity than biodegradable MP, with P distribution coefficients (Kd values) ordered as PVC (5.19 L kg-1) > PE (4.23 L kg-1) > PLA (2.48 L kg-1). Notably, the Kd values increased with decreasing sizes of conventional MP, whereas the opposite trend was observed for PLA. The presence of fulvic acid affected the adsorption of P by MP in aqueous medium. Increased fulvic acid content reduced P adsorption capacity of MP, thus enhancing P availability. Our findings contribute to a better understanding of P dynamics in MP-contaminated agricultural soil and aqueous medium, which could aid in formulating sustainable agricultural practices and effective environmental management strategies for plastic mulching films and P contamination.

Ecotoxicological effects of co-exposure biodegradable microplastics polylactic acid with cadmium are higher than conventional microplastics polystyrene with cadmium on the earthworm

Microplastics (MPs) are plastic fragments with particle sizes <5 mm, ubiquitously distributed in terrestrial environments. However, the negative effects of MPs, such as joint-pollution with heavy metals on soil fauna remain controversial. This study investigated survival rate, growth, reproduction, avoidance behavior, histology, biochemical assays, comet assay, qPCR, Cd content, and IBR index. We found that six types of traditional MPs (PC, PP, PVC, LDPE, PET and PS, and PLA (a biodegradable microplastics)) had no adverse effects on earthworm growth, survival and reproduction. Moreover, we found that earthworms exhibit an avoidance behavior towards PLA. Both PS and PLA can exacerbated Cd pollution, leading to loose circular muscle layer, DNA damage in coelomocytes, and impaired antioxidant system due to increased reactive oxygen species (ROS). mRNA level of HSP70 increased under joint-pollution of both PS and Cd or PLA and Cd compared to Cd treatment alone. MPs enhanced Cd accumulation in earthworms in Cd-contaminated soil. Notably, the Integrated Biomarkers Response index revealed that the toxicity of joint PLA and Cd was greater than the joint effect of PS and Cd, which might violate the original intention of biodegradable plastics having non-toxic influence on the soil fauna. Our findings provide new insights into the ecotoxicological effects of MPs, the joint ecotoxicological effects of MPs and Cd on earthworms, and the ecological risks of MPs to soil fauna.

Physicochemical properties of environmental media can affect the adsorption of arsenic (As) by microplastics

Microplastics are emerging pollutants that can adsorb heavy metals and threaten human health through food chain. Recently, there has been increasing interest in understanding the adsorption behavior of heavy metals by microplastics in farmland soil. In particular, arsenic (As), as a carcinogen, has the potential to be adsorbed by soil microplastics. However, the mechanisms and controlling factors of As adsorption by microplastics in farmland soil under natural conditions are still unknown. Here, microplastics and As were respectively added to farmland soils with different physicochemical properties from twelve provinces of China for adsorption experiment. We performed surface analysis of microplastics, quantified As accumulation through quasi-first-order kinetic equation and developed regression models to screen the factors controlling As adsorption. The results showed that the adsorption of As by soil microplastics was a chemical process accompanied by the loss of electrons from oxygen-containing functional groups. Soil cation exchange capacity (CEC) was the main factor controlling the adsorption rate, while soil organic matter (SOM), total nitrogen (TN) and CEC mainly influenced the equilibrium adsorption capacity. This is the first report on microplastic-As adsorption in natural soil, which allows deeper insights into risk assessment, prediction and control of microplastic-As pollution in agricultural soil.

Interfacial Interactions of Uranium and Arsenic with Microplastics: From Field Detection to Controlled Laboratory Tests

We studied the co-occurrence of microplastics (MPs) and metals in field sites and further investigated their interfacial interaction in controlled laboratory conditions. First, we detected MPs in freshwater co-occurring with metals in rural and urban areas in New Mexico. Automated particle counting and fluorescence microscopy indicated that particles in field samples ranged from 7 to 149 particles/L. The urban location contained the highest count of confirmed MPs, including polyester, cellophane, and rayon, as indicated by Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy analyses. Metal analyses using inductively coupled plasma (ICP) revealed that bodies of water in a rural site affected by mining legacy contained up to 332.8 μg/L of U, while all bodies of water contained As concentrations below 11.4 μg/L. These field findings motivated experiments in laboratory conditions, reacting MPs with 0.02-0.2 mM of As or U solutions at acidic and neutral pH with poly(methyl-methacrylate), polyethylene, and polystyrene MPs. In these experiments, As did not interact with any of the MPs tested at pH 3 and pH 7, nor U with any MPs at pH 3. Experiments supplied with U and MPs at pH 7 indicated that MPs served as substrate surface for the adsorption and nucleation of U precipitates. Chemical speciation modeling and microscopy analyses (i.e., Transmission Electron Microscopy [TEM]) suggest that U precipitates resemble sodium-compreignacite and schoepite. These findings have relevant implications to further understanding the occurrence and interfacial interaction of MPs and metals in freshwater.

Quantification and characterization of microplastics (MPs) pollution in peri-uburban agricultural lands of Lahore, Pakistan

Microplastics (MPs) contaminate every conceivable terrestrial and aquatic environment including high peaks and deep marine trenches. Agricultural lands alone are expected to receive plastic up to 23 times more than ocean basins. In this study, soil samples were collected from peri-urban agricultural lands of Lahore on four sides including Kala Shah Kaku (KSK), Punjab University (PU), Dera Gujran (DG), and Sagian (SG). National Oceanic and Atmospheric Administration (NOAA) protocol was used for MPs extraction and analysis. Extracted MPs were analyzed under microscope at 40X magnification and their composition was analyzed using Fourier Transform Infrared (FTIR) spectroscopy. A considerable concentration of MPs was recorded at all sites. The highest contamination was found at SG with 876 ±194 MPs/kg of soil, and the lowest contamination was recorded at PU with 672 ±235 MPs/kg of soil. However, these differences among the sites were not statistically significant (p = 0.29). The overall predominant shape of MPs was fibers (613±71, 79.73%) followed by sheets (125±55, 16.28%), fragments (30±5, 3.9%) and foam particles (1±2, .09%). The differences in the distribution of MPs in various types were statistically significant (p = 0), while differences between sites were insignificant (p = 0.13). About 95% of MPs were less than 2 mm and 85% were less than 1 mm size. The distribution of MPs in various sizes (p = 0) and differences of this distribution between sites (p = 0.037) were both statistically significant. A good diversity of nine colored MPs was recorded, however majority of the MPs were transparent (89.57%). Six polymer including Polyethylene (PE), Polyethylene terephthalate (PET), Polypropylene (PP), Polystyrene (PS), Polycarbonate (PC), and Polyvinyl Chloride (PVC) were identified by FTIR. The current levels of MPs pollution are higher than in many other parts of the world. Composition of MPs (types, colors, sizes, and polymer types) indicates the diversity of their sources and their possible implications on agricultural ecosystem.

Phytotoxic effects of polyethylene microplastics combined with cadmium on the photosynthetic performance of maize (Zea mays L.)

Microplastics (MPs) and cadmium (Cd) has attracted increasing attention due to their combined toxicity to terrestrial vegetation. Photosynthesis which utilizes light energy to synthesize organic substances is crucial for crop production. However, the plant photosynthetic response to the joint toxicity of MPs and Cd is still unknown. Here, we studied the effects of polyethylene (PE) MPs on the photosynthetic performance of two maize cultivars Xianyu 335 (XY) and Zhengdan 958 (ZD) grown in a Cd contaminated soil. Results showed that the leaf Cd concentration in XY and ZD reached 26.1 and 31.9 μg g-1, respectively. PE-MPs did not influence the leaf Cd content, but posed direct and negative effects on photosynthesis by increasing the malondialdehyde content, reducing the chlorophyll content, inhibiting photosynthetic capacity, disrupting the PSII donor side, blocking electron transfer in different photosystems, and suppressing the oxidation and reduction states of PSI. Transcriptomic analysis revealed that the inhibitory effect of combined PE-MPs and Cd on maize photosynthesis was attributed to suppressed expression of the genes encoding PSII, PSI, F-type ATPase, cytochrome b6/f complex, and electron transport between PSII and PSI. Using WGCNA, we identified a MEturquoise module highly correlated with photosynthetic traits. Hub genes bridging carbohydrate metabolism, amino acid metabolism, lipid metabolism, and translation provided the molecular mechanisms of PE-MPs and Cd tolerance in maize plants. The comprehensive information on the phytotoxicity mechanisms of Cd stress in the presence or absence of PE-MPs on the photosynthesis of maize is helpful for cloning Cd and PE-MP resistance genes in the future.

Polystyrene and low-density polyethylene pellets are less effective in arsenic adsorption than uncontaminated river sediment

The adsorption process of inorganic arsenic (As) plays an important role in its mobility, bioavailability, and toxicity in the river environment. In this work, the adsorption of dissolved arsenite (As(III)) and arsenate (As(V)) by microplastics (MPs) pellets (polystyrene (PS) and low-density polyethylene (LDPE)), river sediment, and their mixture were investigated to assess the adsorption affinities and mechanism. The adsorption kinetics showed slow and mild rising zones from the natural behavior of the chemical adsorption. The results indicated that both MP characteristics and water properties played a significant role in the adsorption behavior of inorganic As species. The As adsorption equilibrium was modeled well by both Langmuir and Freundlich isotherms and partly fitted with the Sips model suggesting that both mono-layer and multi-layer adsorption occurred during adsorption The spontaneous adsorption process for both As(III) and As(V) was evidenced by the adsorption thermodynamics. The maximum adsorption capacities of As(III) and As(V) reached 143.3 mg/kg and 109.8 mg/kg on PS in deionized water, which were higher than those on sediment-PS mixture (119.3 mg/kg, 99.2 mg/kg), which were all lower than on sediment alone (263.3 mg/kg, 398.7 mg/kg). The Fourier transform infrared spectroscopy analysis identified that As(III) and As(V) interaction with sediment surface functional groups was the main adsorption mechanism from surface complexation and coordination. Two functional groups of polystyrene (-NH2, -OH) were mainly involved in the adsorption of inorganic As species on PS, while -COO- and -OH functional groups contributed to the adsorption mechanism of inorganic As species on LDPE. The findings provide valuable insight on the adsorption behavior and mechanisms of As(III) and As(V) in river systems in the presence of MPs particles. Both PS and LDPE were shown to be less effective than river sediment in the adsorption of As species from water, which provides a different perspective in understanding the scale of MPs impact in pollutant transport in the aquatic environment.

Global hotspots and trends in interactions of microplastics and heavy metals: a bibliometric analysis and literature review

Microplastics (MPs) are identified as emerging contaminants; however, their interactions with heavy metals in the environment have not been well elucidated. Here, the research progress, hotspots, and trends in the interactions of MPs and heavy metals were analyzed at a global scale using a bibliometric analysis combined with a literature review. We comprehensively searched the Web of Science Core Collection database from 2008 to July 5, 2022. A total of 552 articles published in 124 journals were selected, which came from 70 countries and 841 institutions. The most contributing journals, countries, institutions, and authors were identified. Visualization methods were used to identify high co-citation references and hot keywords in the 552 articles. Evolutionary and cluster analyses of hot keywords suggested several research hotspots in the co-contamination of MPs and heavy metals, including their toxicity and bioaccumulation, the adsorption and desorption behaviors, the environmental pollution and risk assessment, and their detection and characterization. Based on the current research status, several directions of priority are recommended to understand the interactions between MPs and heavy metals and their potential risks. This article can help recognize the current research status and future directions in this field.

Co-transport of arsenic and micro/nano-plastics in saturated soil

Contaminants can co-exist and migrate together in the environment, causing complex (and sometimes unexpected) transport dynamics which challenge the efficient remediation of individual contaminants. The co-transport dynamics, however, remained obscure for some contaminants, such as arsenic and micro/nano-plastics (MNPs). To fill this knowledge gap, this study explored the co-transport dynamics of arsenic and MNP particles in saturated soil by combining laboratory experiments and stochastic model analysis. Isothermal adsorption and sand column transport experiments showed that the adsorption of arsenic by MNP particles followed the Freundlich model, with a maximum adsorption of 2.425 mg/g for the MNP particles with a diameter of 100 nm. In the presence of MNP particles, the efflux concentration of arsenic ions declined due to adsorption, where the decline rate decreased with the increasing MNP size and increased with the increasing adsorption capacity. Experimental results also showed that the 100 nm nano-plastic particles prohibited arsenic transport in saturated sand columns, while the 5 μm microplastics enhanced arsenic transport due to electrostatic adsorption and media pore plugging. A tempered time fractional advective-dispersion equation was then proposed to quantify the observed breakthrough curves of arsenic. The results showed that this model can reliably capture the co-transport behavior of arsenic with MNPs in the saturated soil with all coefficients of determination over 0.97, and particularly, the small MNP particles facilitated anomalous transport of arsenic. This study therefore improved the understanding and quantification of the co-transport of arsenic and MNPs in soil.

Microplastics drive microbial assembly, their interactions, and metagenomic functions in two soils with distinct pH and heavy metal availability

Microplastics (MPs) have emerged as widely existing global environmental concerns in terrestrial ecosystems. However, the mechanisms that how MPs are affecting soil microbes and their metagenomic functioning is currently uncertain. Herein, we investigated the response mechanisms of bacterial and fungal communities as well as the metagenomic functions to the addition of MPs in two soils with distinct pH and heavy metals. In this study, the acidic soil (Xintong) and the neutral soil (Huanshan) contaminated by heavy metals were incubated with Polyvinyl Chloride (PVC) MPs at ratios of 2.5% and 5% on 60 and 120 days. We aimed to evaluate the responding, assembly, and interactions of the metagenomic taxonomy and function. Results showed that only in the acidic soil, PVC MPs significantly increased soil pH and decreased CaCl₂-extractable heavy metals, and also reduced bacterial alpha diversity and interaction networks. The relative proportions of Proteobacteria and Bacteroidota in bacteria, and Mortierellomycota in fungi, were increased, but Chloroflexi and Acidobacteriota in bacteria, Ascomycota and Basidiomycota in fungi, were significantly decreased by PVC MPs. Metagenomic functions related to C cycling were repressed but the nutrient cycles were enriched with PVC MPs. In conclusion, our study suggests that the addition of PVC MPs could shift soil microbial community and metagenomic functioning, as well as increasing soil pH and reduced heavy metal availability.

Photo-aged non-biodegradable and biodegradable mulching film microplastics alter the interfacial behaviors between agricultural soil and inorganic arsenic

The impacts of microplastics (MPs) prevalent in soil on the transport of pollutants were urged to be addressed, which has important implications for ecological risk assessment. Therefore, we investigated the influence of virgin/photo-aged biodegradable polylactic acid (PLA) and non-biodegradable black polyethylene (BPE) mulching films MPs on arsenic (As) transport behaviors in agricultural soil. Results showed that both virgin PLA (VPLA) and aged PLA (APLA) enhanced the adsorption of As(Ⅲ) (9.5%, 13.3%) and As(Ⅴ) (22.0%, 6.8%) due to the formation of abundant H-bonds. Conversely, virgin BPE (VBPE) reduced the adsorption of As(Ⅲ) (11.0%) and As(Ⅴ) (7.4%) in soil owing to the "dilution effect", while aged BPE (ABPE) improved arsenic adsorption amount to the level of pure soil due to newly generated O-containing functional groups being feasible to form H-bonds with arsenic. Site energy distribution analysis indicated that the dominant adsorption mechanism of arsenic, chemisorption, was not impacted by MPs. The occurrence of biodegradable VPLA/APLA MPs rather than non-biodegradable VBPE/ABPE MPs resulted in an increased risk of soil accumulating As(Ⅲ) (moderate) and As(Ⅴ) (considerable). This work uncovers the role of biodegradable/non-biodegradable mulching film MPs in arsenic migration and potential risks in the soil ecosystem, depending on the types and aging of MPs.

Microplastics affect arsenic bioavailability by altering gut microbiota and metabolites in a mouse model

Microplastics exposure is a new human health crisis. Although progress in understanding health effects of microplastic exposure has been made, microplastic impacts on absorption of co-exposure toxic pollutants such as arsenic (As), i.e., oral bioavailability, remain unclear. Microplastic ingestion may interfere As biotransformation, gut microbiota, and/or gut metabolites, thereby affecting As oral bioavailability. Here, mice were exposed to arsenate (6 μg As g^-1) alone and in combination with polyethylene particles of 30 and 200 μm (PE-30 and PE-200 having surface area of 2.17 × 10³ and 3.23 × 10² cm² g^-1) in diet (2, 20, and 200 μg PE g^-1) to determine the influence of microplastic co-ingestion on arsenic (As) oral bioavailability. By determining the percentage of cumulative As consumption recovered in urine of mice, As oral bioavailability increased significantly (P < 0.05) from 72.0 ± 5.41% to 89.7 ± 6.33% with PE-30 at 200 μg PE g^-1 rather than with PE-200 at 2, 20, and 200 μg PE g^-1 (58.5 ± 19.0%, 72.3 ± 6.28%, and 69.2 ± 17.8%). Both PE-30 and PE-200 exerted limited effects on pre- and post-absorption As biotransformation in intestinal content, intestine tissue, feces, and urine. They affected gut microbiota dose-dependently, with lower exposure concentrations having more pronounced effects. Consistent with the PE-30-specific As oral bioavailability increase, PE exposure significantly up-regulated gut metabolite expression, and PE-30 exerted greater effects than PE-200, suggesting that gut metabolite changes may contribute to As oral bioavailability increase. This was supported by 1.58-4.07-fold higher As solubility in the presence of up-regulated metabolites (e.g., amino acid derivatives, organic acids, and pyrimidines and purines) in the intestinal tract assessed by an in vitro assay. Our results suggested that microplastic exposure especially smaller particles may exacerbate the oral bioavailability of As, providing a new angle to understand health effects of microplastics.

Metal concentrations in feathers of red-legged cormorants (Phalacrocorax gaimardi) and sources of plastic in a nesting colony from northern Chile

Mining industry is increasing the concentrations of heavy metals in coastal ecosystems of northern Chile. The presence of plastic in the nests of red-legged cormorants could be acting as a vector of metal presence in their organism. Here we analyze the source of plastic in the nests of cormorants by characterizing the abundance and type of marine debris in beaches and sea surface and the concentrations of eight metals in their feathers. Plastic was present in overall sampled nests and floating and beach debris are not the main sources of plastic to the nests. Overall analyzed metals were present in the cormorants in the following order: Zn > Cu > Se > Pb > Cd > As > Hg > Cr and Se, Cd and Pb concentrations were above the toxic limit. Further studies should investigate the potential adverse effects that plastics and metals presence may cause in this nesting colony.

Microplastics in Sewage Sludge: A review

Microplastics (MPs) represent a serious problem for the environment and for this reason they have been studied in many articles, especially their presence in aquatic environments and soils. MPs have been found in wastewater and sewage sludge from municipal wastewater treatment plants (WWTPs). Most part of the published works have focused on the detection and elimination of MPs in the water line and several reviews have been published in the last years. In addition, the application of sewage sludge produced from WWTPs for agricultural use is known to be a primary source of MPs in soils. However, in the scientific literature less attention has been paid to the sludge and little is known about MPs fate when it is applied in agriculture. This work aims to give a global revision on the most used techniques to identify and detect MPs in sludges, their characteristics and incidence, their effect on sludge treatments and their impact on the environment. As far as we know, there are no standardized protocols for MPs extraction from soil and the possible repercussions on the cultivation of plants are not known. This review evidences that more studies are necessary to stablished standardized protocols and decipher the main mechanisms and the effects of MPs from sewage sludge in the environment.

A plastic world: A review of microplastic pollution in the freshwaters of the Earth's poles

Microplastic (MP) pollution is of great environmental concern. MPs have been found all over the Earth, including in the poles, which is indicative for the important threat they constitute. Yet, while the ocean is object of major interest, the data available in the literature about MP pollution in the freshwaters of the Earth's poles are still limited. Here, we review the current knowledge of MP pollution in the freshwaters of the Arctic, Antarctica and Third Pole, and we assess its ecological implications. This review highlights the presence of MPs in the lakes, rivers, snow, and glaciers of the investigated sites, questions the transport patterns through which MPs reach these remote areas, and illustrates that MP pollution is a real problem not only in marine systems, but also in the freshwater environments of the Earth's poles. MPs can indeed be ingested by animals and can physically damage their digestive tracts, as well as escalate the trophic levels. MPs can also alter microbial communities by serving as surfaces onto which microbes can grow and develop, and can enhance ice melting when trapped in glaciers. Hence, considered the limited data available, we encourage more research on the theme.

Arsenic adsorption by carboxylate and amino modified polystyrene micro- and nanoplastics: kinetics and mechanisms

We investigated adsorption characteristics of As(III) and As(V) onto two different functionalized polystyrene (PS) microplastics (MPs). Our results show that there is the potential for PS MPs to adsorb both As(III) and As(V). Using a particle size of 80-82 nm, maximum As(III) and As(V) adsorption capacities of 0.57 mg/g and 0.37 mg/g were obtained by PS-COOH MPs. These capacities were markedly higher than those for PS-NH₂ MPs, which were 0.41 mg/g and 0.27 mg/g, respectively. The pseudo-second-order adsorption kinetic model was found to effectively describe the sorption kinetics of As(III)/As(V) on two different functionalized PS MPs. Langmuir isotherms better represented the equilibrium adsorption results. The kinetic models, XPS, and FTIR results indicate that hydrogen bonding, hydroxyl complexation, and outer-sphere surface complexation may have partly contributed to adsorption of As onto PS MPs. Adsorption capacity markedly decreases with increasing salinity or presence of humic acids (HA), suggesting an inhibiting effect of salinity and HA through outer-sphere complexation. These findings confirm that microplastics have great potential to adsorb As and hence are ultimately highly likely to affect the environmental behavior of As in an ecosystem.

The interfacial behaviors of different arsenic species on polyethylene mulching film microplastics: Roles of the plastic additives

Plastic additives widely existed in plastic mulching films, but their roles in microplastics (MPs) derived from these plastics as vectors of pollutants were not clear. This work clarified the role of plastic additives on the sorption-desorption behaviors of four arsenic species (arsenite (As(Ⅲ)), arsenate (As(Ⅴ)), roxarsone (ROX), and p-arsanilic acid (p-ASA)) on/from virgin polyethylene (V-PE), white PE mulching film (W-PE, with Si-containing additives), and black PE mulching film (B-PE, with CaCO₃ and TiO₂ additives) MPs. The maximum sorption amounts of arsenic species on V-PE (3.33-20.10 mg/kg) and W-PE MPs (4.78-21.93 mg/kg) had no significant difference, while those on B-PE (43.02-252.19 mg/kg) facilitated by its additives were up to one order of magnitude greater than V-PE or W-PE (p < 0.05). Desorption hysteresis index (HI) indicated the irreversible arsenic sorption on three PE MPs, especially for B-PE containing additives that can co-precipitate and complex with arsenicals. The effects of pH, humic substances, and coexisting anions on arsenic sorption by B-PE were more obvious than that by V-PE or W-PE MPs, attributing to electrostatic interaction enhanced by CaCO₃ and TiO₂ additives. This work provides theoretical basis for migration of arsenic species on MPs containing plastic additives and their potential environmental risk assessment.

Adsorption of fluoranthene and phenanthrene by virgin and weathered polyethylene microplastics in freshwaters

Concern exists regarding potential health impacts associated with contaminants of emerging concern (CECs) that adsorb to microplastics (MPs). Previous studies have examined MPs as potential contaminant vectors in marine environments as opposed to freshwaters that represent drinking water sources. This study examined adsorption of two polycyclic aromatic hydrocarbons (PAHs), phenanthrene and fluoranthene, by virgin and weathered polyethylene (PE) in both artificial and natural freshwater matrices. Adsorption kinetics and isotherms conducted in artificial freshwater (AFW) consistently showed higher adsorption onto smaller (200 μm) PE when compared to 1090 μm PE. Adsorption mechanisms were primarily associated with hydrophobic interactions and monolayer chemisorption. As well, environmental factors including dissolved organic matter (DOC), pH, and polymer weathering also impacted adsorption. This work provides new insights regarding the adsorption of organic pollutants to better understand the risk of MPs in drinking water sources.

Enhanced heavy metal adsorption on microplastics by incorporating flame retardant hexabromocyclododecanes: Mechanisms and potential migration risks

Microplastics (MPs) are known to act as carriers of heavy metals; however, little is known about the intrinsic chemical additives of MPs, such as hexabromocyclododecane (HBCD), in terms of the adsorption behaviors and migration risks of heavy metals on MPs. Here, we reported the potential mechanisms and risks of HBCD inherent in polystyrene (PS) MPs with Cu(II), Ni(II), and Zn(II) adsorption/desorption. A comparison of the adsorption capacity of the metals onto HBCD/PS composites (HBCD/PS) MPs (10.31-20.76 μmol/g), pure MPs (0-3.60 μmol/g), and natural minerals (0.11-13.88 μmol/g) showed that the addition of HBCD significantly promoted the metals adsorption onto the HBCD/PS MPs, and even exceeded that of natural particles. Isotherms and thermodynamic data suggested that the adsorption process of the metals onto the HBCD/PS MPs was spontaneous and endothermic, and that the adsorption was a mainly multi-ion process with an inclined direction. Furthermore, the results of SEM-EDS, FTIR, and XPS analyses, as well as density functional theory well explained that the metals were mainly adsorbed on the -O and -Br groups of the HBCD/PS MPs via electrostatic interactions and surface complexation. More importantly, by comparing the desorption activity with natural river water and seawater, HBCD inherent in MPs can enhance the long-range transfer of metals carried by the HBCD/PS MPs from contamination sources to potential sink like oceans. Thus, the HBCD/PS MPs with high loading of Cu(II), Ni(II), and Zn(II) could be potential secondary sources of these metals in seawater. Overall, these findings revealed the potential risks of flame retardant in MPs associated with metal migration, and advocated that flame retardant-related waste MPs should be included in coastal sustainable development.

The adsorption of arsenic on micro- and nano-plastics intensifies the toxic effect on submerged macrophytes

Currently little is known about the adsorption behaviors of metalloids on microplastics (MPs) and their complex toxic effects on aquatic plants. Herein, we investigated the adsorption behaviors of arsenic (As(III) and As(V)) on three types of MPs (polystyrene, polyvinyl chloride, and polyethylene) with four different particle sizes (100, 10, 1, and 0.1 μm). Compared with the short-term exposure experiment, co-toxicity of polystyrene nanoplastics (PS-NPs) and As on two submerged macrophytes (Vallisneria denseserrulata and Potamogeton crispus) were explored through two relatively longer 14-day-cultivation experiments in summer and spring, respectively. The adsorption results showed that As entered the internal surface adsorption site of MPs at 24 h and fully combined to reach equilibrium. The adsorption capacity also enhanced with the increase of MPs concentrations, which generated more adsorption sites for binding with MPs. The presence of PS-NPs increased the absorption of As on macrophytes by 36.2-47.2%. More serious damage of leaf structure by combined PS-NPs and As was observed by transmission electron microscope. The larger harms by the co-toxicity of MPs and As were also reflected by the changes in physiochemical characteristics (e.g. photosynthesis) and the enhancement of oxidative damage of macrophytes. This work provides a clear theoretical basis for the behavior of PS-NPs as carrier with other contaminants on submerged macrophytes, and clearly evaluates the co-toxicity of NPs and metalloids in complex aquatic environments.

Risk associated with microplastics in urban aquatic environments: A critical review

The presence of microplastics (MPs) has been recognized as a significant environmental threat due to adverse effects spanning from molecular level, organism health, ecosystem services to human health and well-being. MPs are complex environmental contaminants as they bind to a wide range of other contaminants. MPs associated contaminants include toxic chemical substances that are used as additives during the plastic manufacturing process and adsorbed contaminants that co-exist with MPs in aquatic environments. With the transfer between the water column and sediments, and the migration within aquatic systems, such contaminants associated MPs potentially pose high risk to aquatic systems. However, only limited research has been undertaken currently to link the environmental risk associated with MPs occurrence and movement behaviour in aquatic systems. Given the significant environmental risk and current knowledge gaps, this review focuses on the role played by the abundance of different MP species in water and sediment compartments as well as provides the context for assessing and quantifying the multiple risks associated with the occurrence and movement behaviour of different MP types. Based on the review of past literature, it is found that the physicochemical properties of MPs influence the release/sorption of other contaminants and current MPs transport modelling studies have primarily focused on virgin plastics rather than aged plastics. Additionally, risk assessment of contaminants-associated MPs needs significantly more research. This paper consolidates the current state-of-the art knowledge on the source to sink movement behaviour of MPs and methodologies for assessing the risk of different MP species. Moreover, knowledge gaps and emerging trends in the field are also identified for future research endeavours.

Alkaline aging significantly affects Mn(II) adsorption capacity of polypropylene microplastics in water environments: Critical roles of natural organic matter and colloidal particles

Most microplastic particles may undergo various aging in water environments. In this work, surface physicochemical properties were firstly compared among pristine polypropylene (PP-pris) microplastics, and two aged ones obtained after pretreated with HCl (PP-acid) and NaOH (PP-alka). When compared with PP-pris and PP-acid, PP-alka had a much stronger Mn(II) adsorption capacity. The results regarding the role of natural organic matter and colloidal particle concentrations on adsorption demonstrated that for water solutions either containing kaolin or not, humic acid (HA) had significantly negative influence on Mn(II) adsorption capacity of PP-alka due to their complexation and competition effects, and its negative influence became enhanced with increasing kaolin concentrations. Besides, established conceptual models of adsorption were applied to comprehensively explore adsorption mechanisms of PP-alka for Mn(II) in the coexistence of HA and kaolin. An important suggestion was that in complicated adsorption-reactor system, great numbers of microplastics-kaolin heteroaggregates might be formed via ion bridging of Mn(II) and/or polymer bridging of HA. So these formed aggregates were possible to re-organize themselves, under pre-set vibration-speed conditions, for achieving a more stable structure. As a consequence, Mn(II) adsorption behaviors would be affected by changes in steric-hindrance effects of HA molecules and surface charge distribution of resultant heteroaggregates.

Adsorption and desorption behavior of arsenite and arsenate at river sediment-water interface

The adsorption of inorganic arsenic (As) plays an important role in the mobility and transport of As in the river environment. In this work, the adsorption and desorption of arsenite [As(III)] and arsenate [As(V)] on river sediment were conducted under different pH, initial As concentrations, river water and sediment composition to assess As adsorption behavior and mechanism. Both adsorption kinetics and equilibrium results showed higher adsorption capacity of sediment for As(V) than As(III). Adsorption of As(III) and As(V) on river sediment was favored in acidic to neutral conditions and on finer sediment particles, while sediment organic matter marginally reduced adsorption capacity. In addition, higher adsorption affinity of As(III) and As(V) in river sediment was observed in deionised water than in river water. For the release process, the desorption of both As(III) and As(V) followed nonlinear kinetic models well, showing higher amount of As(III) release from sediment than As(V). Adsorption isotherm was well described by both Langmuir and Freundlich models, demonstrating higher maximum adsorption capacity of As(V) at 298.7 mg/kg than As(III) at 263.3 mg/kg in deionised water, and higher maximum adsorption capacity of As(III) of 234.3 mg/kg than As(V) of 206.2 mg/kg in river water. The XRD showed the changes in the peaks of mineral groups of sediment whilst FTIR results revealed the changes related to surface functional groups before and after adsorption, indicating that Fe-O/Fe-OH, Si(Al)-O, hydroxyl and carboxyl functional groups were predominantly involved in As(III) and As(V) adsorption on sediment surface. XPS analysis evidenced the transformation between these As species in river sediment after adsorption, whilst SEM-EDS revealed higher amount of As(V) in river sediment than As(III) due to the lower signal of Al.

A Review on Heavy Metal Ion Adsorption on Synthetic Microfiber Surface in Aquatic Environments

Synthetic microfibers (SMFs), tiny particles which gets fragmented from large fragments of large synthetic fibers having less than 10 µm in diameter, have gathered ubiquitously in each and every corner of the earth. After their release into the aquatic environment, they remain there without natural degradation. Furthermore, it can be anticipated that floating units are transported along the food chain leading to bioaccumulation. It has been estimated that approximately 10-20 Mt of large fabric products as garbage enter into aquatic system per annum. Recently, these synthetic fragments have been investigated as transporters of heavy metal ions (HMs) showing different types of interactions. Yet, the underlying mechanism of these types of interaction is not known, especially the factors stimulating this process and how badly they affect biotic communities. Through this article, a detailed survey was carried out on the sources of microfibers and HMs into the aquatic environment, adsorption of different types of HMs on the SMF surface, mechanics favors these HM-MF interactions, particularly highlighting the significant roles of interaction on microbial biofilm formation. Their collaborative effects which possess harmful effects on aquatic as well as terrestrial organisms was also discussed. Lastly, the future investigations should focus on rigorous research in this field. This article to the best of our knowledge briefly describes the current research developments and emphasizes the vital function of the microorganisms on MFs-HMs interactions with the encouragement for rigorous research in this field to reveal accurate mechanisms and decrease the hazards related with MF presence.

Uncovering the disposable face masks as vectors of metal ions (Pb(Ⅱ), Cd(Ⅱ), Sr(Ⅱ)) during the COVID-19 pandemic

The demand for disposable face masks (DFMs) increased sharply in response to the COVID-19 pandemic. However, information regarding the underlying roles of the largely discarded DFMs in the environment is extremely lacking. This study focused on the pristine and UV-aged DFMs as vectors of metal ions (Pb(Ⅱ), Cd(Ⅱ), and Sr(Ⅱ)). Further, the aging mechanism of DFMs with UV radiation as well as the interaction mechanisms between DFMs and metal ions were investigated. Results revealed that the aging process would help to promote more metal ions adsorbed onto DFMs, which was mainly attributed to the presence of oxygen-containing groups on the aged DFMs. The adsorption affinity of pristine and aged DFMs for the metal ions followed Pb(Ⅱ) > Cd(Ⅱ) > Sr(Ⅱ), which was positively corrected with the electronegativity of the metals. Interestingly, we found that even if DFMs were not disrupted, DFMs had similar or even higher adsorption affinity for metals compared with other existing microplastics. Besides, regarding environmental factors, including salinity and solution pH played a crucial role in the adsorption processes, with greater adsorption capacities for pristine and aged DFMs at higher pH values and low salinity. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and density functional theory further confirmed that the pristine DFMs interacted with the metals mainly through electrostatic interaction, while electrostatic interaction and surface complexation jointly regulated the adsorption of the metals onto aged DFMs. Overall, these findings would help to evaluate environmental behaviors and risks of DFMs associated with metals.

Experimental and modeling analyses of COD removal from industrial wastewater using the TiO2-chitosan nanocomposites

In the present study, titanium oxide (TiO₂) nanoparticles, chitosan, and several nanocomposites containing different mass dosages of TiO₂ and chitosan have been applied as the adsorbent for COD removal from the industrial wastewater (Bouali Sina Petrochemical Company, Iran). The FESEM, XRD, and FTIR tests have been employed to characterize TiO₂ nanoparticles, chitosan, and fabricated nanocomposites. Then, the effect of adsorption parameters, including TiO₂–chitosan mass ratio (1:1, 1:2, and 2:1), adsorbent content (0.25–2.5 g), temperature (20–50 °C), pH (3–11), solution volume (100–500 mL), and contact time (30–180 min) on the COD reduction has also been monitored both experimentally and numerically. The Box–Behnken design of the experiment approves that TiO₂–chitosan (1:1), adsorbent content of 2.5 g, temperature = 20 °C, pH 7.4, solution volume of 100 mL, and contact time = 180 min are the condition that maximizes the COD removal (i.e., 94.5%). Moreover, the Redlich–Peterson and Pseudo-second order models are the best isotherm and kinetic scenarios to describe COD removal’s transient and equilibrium behaviors. The maximum monolayer COD adsorption capacity of the TiO₂–chitosan nanocomposite is 89.5 mg g⁻¹. The results revealed that the industrial wastewater COD is better to remove using the TiO₂–chitosan (1:1) at temperature = 20 °C.

Adsorption of Different Pollutants by Using Microplastic with Different Influencing Factors and Mechanisms in Wastewater: A Review

The studies on microplastics are significant in the world. According to the literature, microplastics have greatly specific surface areas, indicating high adsorption capacities for highly toxic pollutants in aquatic and soil environments, and these could be used as adsorbents. The influencing factors of microplastic adsorption, classification of microplastics, and adsorption mechanisms using microplastics for adsorbing organic, inorganic, and mixed pollutants are summarized in the paper. Furthermore, the influence of pH, temperature, functional groups, aging, and other factors related to the adsorption performances of plastics are discussed in detail. We found that microplastics have greater advantages in efficient adsorption performance and cost-effectiveness. In this paper, the adsorptions of pollutants by microplastics and their performance is proposed, which provides significant guidance for future research in this field.

Treatment of As(III)-Laden Contaminated Water Using Iron-Coated Carbon Fiber

This work presents the fabrication, characterization, and application of iron-coated carbon fiber (Fe@CF), synthesized in a facile in situ iron reduction, for As(III) removal from an aqueous solution. The physico-chemical properties of the composite were characterized using Brunauer–Emmett–Teller (BET) surface area, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) spectroscopy. Adsorption studies were evaluated in batch experiments with respect to reaction time, the dose of adsorbent, As(III) initial concentration, pH, and co-existing ions. The results showed that the BET surface area and pore volume of Fe@CF slightly decreased after Fe coating, while its pore size remained, while the SEM and XRD analyses demonstrated that the Fe was successfully anchored on the CF. A maximum As(III) adsorption of 95% was achieved with an initial As concentration of 1.5 mg/L at optimum conditions (30 min of reaction time, 1 g/L of dose, 1 mg/L of As(III) concentration, and pH 3.5). Since the treated effluents could not meet the strict discharge standard of ≤10 μg/L set by the World Health Organization (WHO), a longer reaction time is required to complete the removal of remaining As(III) in the wastewater effluents. As compared to the other adsorbents reported previously, the Fe@CF composite has the highest As(III) removal. Overall, the findings suggested that the use of Fe@CF as an adsorbent is promising for effective remediation in the aquatic environment.

Experimental Research on Dynamic Filtering Characteristics of Filter Materials for Electrostatic-Fabric Integrated Precipitator

In recent years, the electrostatic-fabric integrated precipitator has been widely used, and the dust filtration performance of the core component filter bag is the most important factor affecting its dust removal efficiency. In this work, the dynamic dust removal performance of different types of filter media and different experimental conditions were studied on the filter media filtration performance test platform. The experimental study of the filtration performance of different types of filter media showed that the filtration performance stability of polyphenylene sulfide (PPS) filter media was better than that of polyimide (PI) and polytetrafluoroethylene (PTFE) filter media. Increasing the mass per unit area of the filter media had obvious advantages in the short term, and the impregnation process was beneficial to the filter performance of the filter media. Membrane-coated filter media had the best filtration performance, gradient filter media filtration performance was the second, followed by conventional filter media, ordinary blended, and ultrafine blended filter media. Studies with different experimental conditions found that the filtration efficiency increased with increasing resistance, was not significantly affected by changes in inlet dust concentration, but decreased with the increasing filtering velocity. This experimental results provided an important basis for the selection of filter bags for the electrostatic-fabric integrated precipitator project.

Immobilization of lead(Ⅱ) and zinc(Ⅱ) onto glomalin-related soil protein (GRSP): Adsorption properties and interaction mechanisms

Glomalin-related soil protein (GRSP), a microbial product that can be used as a bioflocculant, is critical to metal sequestration in the ecosystem. However, the relationship between GRSP and heavy metal has not been well explored. In this study, the adsorption behaviors and mechanisms of Pb(II) and Zn(II) ions on GRSP were investigated. Results reveal that the Pb(II) and Zn(II) adsorption closely conform to the pseudo second-order model, which indicates that the chemisorption of GRSP occurred after intra-particle diffusion. The adsorption process is influenced by the degree of pollution, pH value, GRSP content in the environment. In addition, scanning electron microscopy coupled with microanalysis (SEM-EDX) reveals that the surface structure of GRSP is irregularly blocky or flaky and metal ions are uniformly distributed on the surface of GRSP. Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) analysis show that the carboxyl and nitro groups on GRSP act as ligands to form complexes with two divalent metal ions. The interaction between GRSP and the metals is mainly surface complexation. This research further reveals the dynamic response of its structural components when GRSP sequestrates heavy metals in mangrove sediment and aqueous ecosystems, demonstrating a new perspective for the transport and transformation of heavy metals onto GRSP.

Systematical insights into distribution and characteristics of microplastics in near-surface waters from the East Asian Seas to the Arctic Central Basin

The spatial distribution and composition of microplastics in near-surface water (8 m) was investigated from the East Asian Seas to the Arctic Central Basin. Microplastics were detected in 93.9% of the sampling sites. Abundances ranged from 0.48 to 7.62 items/m³, with an average abundance of 2.91 ± 1.93 items/m³. The highest average abundance was observed in the Arctic Central Basin. Polyester (PET) was the dominant type, accounting for 71.3% of total microplastics, followed by rayon or cellophane and polytetrafluoroethylene (PTFE). Microplastics < 2 mm accounted for 81.9% of total particles. Its distribution peaked in the 1-2 mm size range. The 0.30-2 mm fibers were the most abundant. In the East Asian Seas, the abundance was significantly negatively correlated with longitude, whereas the accumulation of microplastics was not observed in the northeastern sector of Japan Sea. Abundances of microplastics at sites located in the sub-Arctic and Arctic Oceans showed a significant positive relationship with latitude, indicating that the Arctic Ocean is a potential accumulation zone of microplastics. The findings of this study will provide systematical insights into distribution of microplastics and basic information for understanding the accumulation mechanism of microplastics in near-surface waters from the East Asian Seas to the Arctic Central Basin.

Nanoplastics and Arsenic Co-Exposures Exacerbate Oncogenic Biomarkers under an In Vitro Long-Term Exposure Scenario

The increasing accumulation of plastic waste and the widespread presence of its derivatives, micro- and nanoplastics (MNPLs), call for an urgent evaluation of their potential health risks. In the environment, MNPLs coexist with other known hazardous contaminants and, thus, an interesting question arises as to whether MNPLs can act as carriers of such pollutants, modulating their uptake and their harmful effects. In this context, we have examined the interaction and joint effects of two relevant water contaminants: arsenic and polystyrene nanoplastics (PSNPLs), the latter being a model of nanoplastics. Since both agents are persistent pollutants, their potential effects have been evaluated under a chronic exposure scenario and measuring different effect biomarkers involved in the cell transformation process. Mouse embryonic fibroblasts deficient for oxidative DNA damage repair mechanisms, and showing a cell transformation status, were used as a sensitive cell model. Such cells were exposed to PSNPLs, arsenic, and a combination PSNPLs/arsenic for 12 weeks. Interestingly, a physical interaction between both pollutants was demonstrated by using TEM/EDX methodologies. Results also indicate that the continuous co-exposure enhances the DNA damage and the aggressive features of the initially transformed phenotype. Remarkably, co-exposed cells present a higher proportion of spindle-like cells within the population, an increased capacity to grow independently of anchorage, as well as enhanced migrating and invading potential when compared to cells exposed to arsenic or PSNPLs alone. This study highlights the need for further studies exploring the long-term effects of contaminants of emerging concern, such as MNPLs, and the importance of considering the behavior of mixtures as part of the hazard and human risk assessment approaches.

Microplastics altered contaminant behavior and toxicity in natural waters

Microplastics (MPs) have received an increasing attention because of their ubiquitous presence and aquatic toxicity associated with MPs and MP-bound contaminants in the natural water. This review is to critically examine the chemical additives leached from MPs, the altered contaminant behaviors and the resulting changes in their aquatic ecotoxicity. Available data suggest that heavy metals Zn, Cr, Pb, and Cd regulated and present in plastics at the sub-mg g^-1 to mg g^-1 level can leach a significant amount depending on MPs size, aging, pH, and salinity conditions. MP-bound organic contaminants are primarily additive-derived (e.g., brominated diphenyl ethers, nonylphenol, and bisphenol A) at the µg g^-1 to mg g^-1 level, and secondarily pyrogenic and legacy origins (e.g., PAHs and PCBs) in the range of ng g^-1 and mg g^-1. MPs tend to have higher but more variable sorption capacities for organic compounds than metals (1.77 ± 2.34 vs. 0.82 ± 0.94 mg g^-1). MPs alter the behavior of heavy metals through the electrostatic interactions and surface complexation, while the transport of additive derived organic compounds are altered primarily through hydrophobic effect as supported by a positive correlation (R² = 0.71) between the logarithmic MPs-adsorbed concentrations and octanol/water partition coefficients (K_OW) of organic compounds. MPs constitute less than 0.01% of the total mass of aquatic particulates in typical waters, but play a discernible role in the local partitioning and long-distance movement of contaminants. MPs alone exert higher toxicity to invertebrates than algae; however, when MPs co-occur with pollutants, both synergistic and antagonistic toxicities are observed depending mainly on the ingestibility of MPs, the extent of sorption, MPs as a transport vector or a sink to scavenge pollutants. We finally suggest several key areas of future research directions and needed data concerning the role of MPs in mitigating pollutant leaching, transport and risk under conditions mimicking natural and polluted waters.

Speciation and release risk of heavy metals bonded on simulated naturally-aged microplastics prepared from artificially broken macroplastics

The negative impact of microplastics (MPs) act as metals vectors to environment and ecosystem have been paid more and more attention, and the accumulation risk of them to human body through the food chains and food webs needs to attract attention. In addition, the MPs bonded with heavy metals transport from river into the sea with high salinity may also have metals release risk. Herein, natural aged microplastics prepared from artificially broken macroplastics adsorbed with heavy metals accumulated from the natural environment were tested for their states and release risk in several simulated solution (NaCl and gastrointestinal solutions) to understand their effects on environment and human health. The adsorption capacity of different heavy metals on MPs was different during natural aging process proved by four-acid digestion method. Metals with high accumulation (including Pb, As, Cr, Mn, Ni, Zn, Co, Cu and Cd) on NAMPs were selected for further study. Results obtained via three-step extraction method showed that these heavy metals were mainly present as acid-extractable and reducible ions, which were characterized by high bioavailability. Release experiments suggested the notable Mn, Zn, As, Cr, Cu and Ni release in NaCl solution, and significant release of Mn, Zn, As, Cr, Cu, Pb and Ni in gastrointestinal solutions. The high metal release ratio in the simulated gastric solution was attributed to the weak binding of metal ions to NAMPs in acidic environment. This study will play a vital rule in assessing the ecological risks associated with MPs in natural environment.

Seeking for a perfect (non-spherical) microplastic particle - The most comprehensive review on microplastic laboratory research

In recent decades, much attention has been paid to microplastic pollution, and research on microplastics has begun to grow exponentially. However, microplastics research still suffers from the lack of standardized protocols and methods for investigation of microplastics under laboratory conditions. Therefore, in this review, we summarize and critically discuss the results of 715 laboratory studies published on microplastics in the last five years to provide recommendations for future laboratory research. Analysis of the data revealed that the majority of microplastic particles used in laboratory studies are manufactured spheres of polystyrene ranging in size from 1 to 50 µm, that half of the studies did not characterize the particles used, and that a minority of studies used aged particles, investigated leaching of chemicals from microplastics, or used natural particles as a control. There is a large discrepancy between microplastics used in laboratory research and those found in the environment, and many laboratory studies suffer from a lack of environmental relevance and provide incomplete information on the microplastics used. We have summarized and discussed these issues and provided recommendations for future laboratory research on microplastics focusing on (i) microplastic selection, (ii) microplastic characterization, and (iii) test design of laboratory research on microplastics.

The Synthesis of Magnetic Nitrogen-Doped Graphene Oxide Nanocomposite for the Removal of Reactive Orange 12 Dye

Herein, we report the nanofabrication of magnetic calcium ferrite (CaFe2O4) with nitrogen-doped graphene oxide (N-GO) via facile ultrasonication method to produce CaFe2O4/N-GO nanocomposite for the potential removal of reactive orange 12 (RO12) dye from aqueous solution. The successful construction of the nanocomposite was confirmed using different characterization techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform-infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The magnetic properties were studied using vibrating sample magnetometer (VSM) indicating ferromagnetic behavior of the synthesized materials that facilitate their separation using an external magnetic field after adsorption treatment. The addition of N-GO to CaFe2O4 nanoparticles enhanced the BET surface area from 24 to 52.93 m2/g as resulted from the N2 adsorption-desorption isotherm. The adsorption of the synthesized nanomaterials is controlled by several parameters (initial concentration of dye, contact time, adsorbent dosage, and pH), and the RO12 dye removal on the surface of CaFe2O4 nanoparticles and CaFe2O4/N-GO nanocomposite was reached through the chemisorption process as indicated from the kinetic study. The adsorption isotherm study indicated that the adsorption process of RO12 dye was best described through the Langmuir isotherm approving the monolayer adsorption. According to the Langmuir model, the maximum adsorption capacity for RO12 was 250 and 333.33 mg/g for CaFe2O4 nanoparticles and CaFe2O4/N-GO nanocomposite, respectively. The adsorption capacity offered by CaFe2O4/N-GO nanocomposite was higher than reported in the literature for adsorbent materials. Additionally, the regeneration study indicated that CaFe2O4/N-GO nanocomposite is reusable and cost-effective adsorbent. Therefore, the nanofabricated CaFe2O4/N-GO hybrid material is a promising adsorbent for water treatment.

Microplastics as a vehicle of heavy metals in aquatic environments: A review of adsorption factors, mechanisms, and biological effects

Microplastics (MPs) have recently attracted much attention due to their widespread distribution in the aquatic environment. Microplastics can act as a vector of heavy metals in the aquatic environment, causing a potential threat to aquatic organisms and human health. This review mainly summarized the occurrence of microplastics in the aquatic environment and their interaction with heavy metals. Then, we considered the adsorption mechanisms of MPs and heavy metals, and further critically discussed the effects of microplastics properties and environmental factors (e.g., pH, DOM, and salinity) on the adsorption of heavy metals. Finally, the potential risks of combined exposure of MPs and heavy metals to aquatic biota were briefly evaluated. This work aims to provide a theoretical summary of the interaction between MPs and heavy metals, and is expected to serve as a reference for the accurate assessment of their potential risks in future studies.

A novel mechanism study of microplastic and As co-contamination on indica rice (Oryza sativa L.)

Although the compound pollution of microplastics and arsenic (As) in paddy soil can affect the growth and quality of rice, relevant research on this phenomenon was limited. Therefore, we combined a pot experiment with computational chemistry to explore the effects and mechanism of polystyrene (PSMP) and polytetrafluoroethylene (PTFE) microplastics on As bioavailability. PSMP and PTFE interacted with rice root exudates through van der Waals forces, approached the rice root system, inhibited root activity, reduced the relative abundance of Geobacteria and Anaeromyxobacter, and consequently reduced the iron plaques on the root surfaces. Consequently, As uptake by the rice was inhibited. PSMP and PTFE reduced the hemoglobin content by directly destroying its tertiary structure, thereby retarding rice growth. In contrast, As increased the hemoglobin content by inducing reactive oxygen species in rice. Under the influence of PSMP, PTFE, and As, the activities of soluble starch synthase and pyrophosphorylase in rice grains were inhibited, and starch accumulation decreased. Thus, PSMP, PTFE, and As reduced rice biomass and yield owing to their physiological toxicity and adverse impacts on root activity. Grain yields in soil with an As content of 86.3 mg·kg^-1, 0.5% small particle-sized PSMP, and 0.5% small particle-sized PTFE decreased by 30.7%, 20.6%, and 19.4%, respectively, compared to the control. This study determined the comprehensive mechanism through which PSMP and PTFE affect As bioavailability, which is critical for managing rice biomass and low yields in As and microplastic co-contaminated soil.

Nanoplastics aggravate the toxicity of arsenic to AGS cells by disrupting ABC transporter and cytoskeleton

The coexistence of nanoplastics (NPs) and pollutants such as arsenic (As) has become an unignorable environmental problem. However, there is still a considerable knowledge gap about the impact of NPs and pollutants on human health risks. In this study, the human gastric adenocarcinoma (AGS) cells were used as a model to investigate the toxicity of NPs with different particle sizes and As by MTT assay, western blotting, immunofluorescence and so on. The results showed that 20 nm (8 μg/mL), 50 nm (128 μg/mL), 200 nm (128 μg/mL), 500 nm (128 μg/mL), 1000 nm (128 μg/mL) polystyrene (PS) did not affect cell viability, ROS, intracellular calcium and activate apoptosis pathway in AGS cells. However, noncytotoxic concentration of NPs enhanced the cytotoxicity and intracellular accumulation of As. NPs destroys the fluidity of cell membrane and cytoskeleton, inhibits the activity of ABC transporter, and leads to the accumulation of As in cells. This work highlights that the damage caused by NPs, especially at the level of noncytotoxicity, joint with As cannot be ignored and provides a specific toxicological mechanism of NPs accompanied by exposure to As.